This section contains the configuration files (dotfiles) of various
programs I use.
-** bspwm
-
-*** bspwmrc
-:PROPERTIES:
-:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh :tangle no
-sxhkd &
-sh ~/.fehbg &
-xfce4-panel -d &
-compton &
-sleep 0.5 && pasystray --notify=all &
-
-bspc monitor -d I II III IV V VI VII VIII IX X
-#bspc monitor eDP-1 -d I II III IV V
-#bspc monitor HDMI-1 -d VI VII VIII IX X
-
-#bspc config border_width 2
-#bspc config window_gap 8
-bspc config window_gap 0
-
-bspc config bottom_padding 26
-
-bspc config split_ratio 0.52
-bspc config borderless_monocle true
-bspc config gapless_monocle true
-bspc config click_to_focus button1
-bspc config directional_focus_tightness low
-
-#bspc rule -a Firefox desktop='^1' follow=on
-bspc rule -a Nightly desktop='^1' follow=on
-bspc rule -a Emacs desktop='^2' state=tiled follow=on
-#bspc rule -a Chromium desktop='^4' follow=on
-bspc rule -a URxvt state=floating
-bspc rule -a URxvt:tiled state=tiled
-bspc rule -a Connman-gtk state=floating
-bspc rule -a Xfce4-panel state=floating
-bspc rule -a TelegramDesktop state=floating
-bspc rule -a Ec state=floating
-bspc rule -a Pavucontrol state=floating
-bspc rule -a Eog state=floating
-bspc rule -a Seahorse state=floating
-bspc rule -a mpv state=floating
-bspc rule -a Evince state=floating
-bspc rule -a Meld state=floating
-bspc rule -a Autokey-gtk state=floating
-bspc rule -a Mousepad state=floating
-bspc rule -a Wrapper-1.0 state=floating
-bspc rule -a File-roller state=floating
-bspc rule -a Gnome-disks state=floating
-bspc rule -a Termite state=floating
-bspc rule -a Termite:tiled state=tiled
-bspc rule -a Thunderbird:Calendar state=floating
-bspc rule -a Audacity state=floating
-bspc rule -a Proof state=floating # pvs x-show-proof
-bspc rule -a Nm-connection-editor state=floating
-bspc rule -a Wire state=floating
-bspc rule -a discord state=floating
-bspc rule -a X2goclient state=floating
-bspc rule -a SimpleScreenRecorder state=floating
-bspc rule -a Gimp state=floating
-bspc rule -a Wrapper-2.0 state=floating
-bspc rule -a Zathura state=tiled
-#+end_src
-
-*** sxhkdrc
-:PROPERTIES:
-:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
-:END:
-
-#+begin_src conf :tangle no
-#
-# wm independent hotkeys
-#
-
-# terminal emulator
-super + {_,shift} + Return
- urxvt{_, -name tiled}
-
-#super + {_,shift} + Return
-# termite{_, --name=tiled}
-
-# program launcher
-super + space
- rofi -show run -display-run '> ' -display-window ' 🗔 '
-
-super + alt + space
- xfce4-popup-whiskermenu
-
-# window finder
-super + backslash
- rofi -show window -display-run '> ' -display-window ' 🗔 '
-
-# password manager
-alt + space
- rofi-pass
-
-# firefox
-#super + r
-# firefox
-
-# chromium
-#super + c
-# chromium -incognito
-
-# emacs
-super + e
- emacs
-
-# make sxhkd reload its configuration files:
-super + Escape
- pkill -USR1 -x sxhkd
-
-# volume {up,down}
-XF86Audio{Raise,Lower}Volume
- pamixer --allow-boost --{in,de}crease 5
-
-# mute
-XF86AudioMute
- pamixer --toggle-mute
-
-XF86AudioMicMute
- pactl set-source-mute 1 toggle
-
-# playback control
-XF86Audio{Play,Prev,Next}
- mpc {toggle,prev,next}
-
-# lock the screen
-super + shift + q
- light-locker-command -l
-
-# Toggle keyboard layout
-super + F7
- toggle-layout
-
-# Toggle Xfce presentation mode
-XF86LaunchB
- toggle-presentation-mode
-
-# monitor brightness
-XF86MonBrightness{Up,Down}
- light -{A,U} 5
-
-super + apostrophe
- rofi-light
-
-# keyboard brightness
-#XF86KbdBrightness{Up,Down}
-# kbdlight {up,down}
-
-XF86RotateWindows
- toggle-tablet
-
-#
-# bspwm hotkeys
-#
-
-# quit bspwm normally
-super + alt + Escape
- bspc quit
-
-# close and kill
-super + {w,q}
- bspc node -{c,k}
-
-# alternate between the tiled and monocle layout
-super + m
- bspc desktop -l next
-
-# send the newest marked node to the newest preselected node
-super + y
- bspc node newest.marked.local -n newest.!automatic.local
-
-# swap the current node and the biggest node
-super + g
- bspc node -s biggest
-
-#
-# state/flags
-#
-
-# set the window state
-super + {t,shift + t,s,f}
- bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
-
-# set the node flags
-super + ctrl + {m,x,y,z}
- bspc node -g {marked,locked,sticky,private}
-
-#
-# focus/swap
-#
-
-# focus the node in the given direction
-super + {_,shift + }{h,j,k,l}
- bspc node -{f,s} {west,south,north,east}
-
-# focus the node for the given path jump
-super + {p,b,comma,period}
- bspc node -f @{parent,brother,first,second}
-
-# focus the next/previous node in the current desktop
-super + {_,shift + }c
- bspc node -f {next,prev}.local
-
-# focus the next/previous desktop in the current monitor
-super + bracket{left,right}
- bspc desktop -f {prev,next}.local
-
-# send to next/prev desktop
-super + shift + bracket{left,right}
- bspc node -d {prev,next} --follow
-
-# focus the last node/desktop
-super + {grave,Tab}
- bspc {node,desktop} -f last
-
-# focus the older or newer node in the focus history
-super + {o,i}
- bspc wm -h off; \
- bspc node {older,newer} -f; \
- bspc wm -h on
-
-# focus or send to the given desktop
-super + {_,shift + }{1-9,0}
- bspc {desktop -f,node -d} '^{1-9,10}'
-
-#
-# preselect
-#
-
-# preselect the direction
-super + ctrl + {h,j,k,l}
- bspc node -p {west,south,north,east}
-
-# preselect the ratio
-super + ctrl + {1-9}
- bspc node -o 0.{1-9}
-
-# cancel the preselection for the focused node
-super + ctrl + space
- bspc node -p cancel
-
-# cancel the preselection for the focused desktop
-super + ctrl + shift + space
- bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
-
-#
-# move/resize
-#
-
-# expand a window by moving one of its side outward
-super + alt + {h,j,k,l}
- bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
-
-# contract a window by moving one of its side inward
-super + alt + shift + {h,j,k,l}
- bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
-
-# move a floating window
-super + {Left,Down,Up,Right}
- bspc node -v {-20 0,0 20,0 -20,20 0}
-
-#alt + bracket{left,right}
-# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
-#+end_src
-
** compton
:PROPERTIES:
:header-args+: :tangle ~/.config/compton.conf
};
#+end_src
+** dovecot
+:PROPERTIES:
+:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
+:END:
+
+#+begin_src conf
+protocols = imap
+
+listen = 127.0.0.1
+log_path = /var/log/dovecot.log
+info_log_path = /var/log/dovecot-info.log
+
+ssl = no
+disable_plaintext_auth = no
+
+auth_verbose = yes
+auth_mechanisms = plain
+
+passdb {
+ driver = passwd-file
+ args = /etc/dovecot/passwd
+}
+
+userdb {
+ driver = static
+ args = uid=amin gid=amin home=/home/amin/mail/%d/%n
+ default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
+}
+
+# mail_home = /home/amin/mail/%d/%n
+# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
+
+# namespace {
+# inbox = yes
+# separator = /
+# }
+
+mail_plugins = $mail_plugins fts fts_lucene
+
+plugin {
+ fts = lucene
+ fts_lucene = whitespace_chars=@.
+ fts_autoindex = yes
+}
+#+end_src
+
** Dunst
:PROPERTIES:
:header-args+: :tangle ~/.config/dunst/dunstrc
<!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
<alias binding="same">
<family>Helvetica</family>
- <accept>
+ <prefer>
<family>Liberation Sans</family>
- </accept>
+ </prefer>
</alias>
</fontconfig>
#+end_src
+** getmail
+
+*** getmailrc
+:PROPERTIES:
+:header-args+: :tangle ~/.getmail/getmailrc
+:END:
+
+#+begin_src conf
+[retriever]
+type = SimplePOP3SSLRetriever
+server = fencepost.gnu.org
+username = bandali
+password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
+port = 995
+use_apop = True
+
+[destination]
+type = Maildir
+path = ~/mail/gnu/Inbox/
+
+# [destination]
+# type = MDA_external
+# path = /usr/lib/dovecot/deliver
+# arguments = ('-d', 'amin@aminb.org')
+
+[options]
+delete = True
+#+end_src
+
+*** getmail.service
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/getmail.service
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=getmail service
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/getmail
+StandardOutput=syslog
+StandardError=syslog
+#+end_src
+
+*** getmail.timer
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/getmail.timer
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=getmail timer
+
+[Timer]
+OnCalendar=*:0/30
+Persistent=true
+Unit=getmail.service
+
+[Install]
+WantedBy=timers.target
+#+end_src
+
** Git
*** gitconfig
#+begin_src conf
[user]
name = Amin Bandali
- email = mab@gnu.org
- signingkey = 4E05246AB0BF7FFB
+ email = bandali@gnu.org
+ signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
#+end_src
**** signing
**** send-email
#+begin_src conf
[sendemail]
- smtpuser = aminb
+ smtpuser = bandali
smtpserver = fencepost.gnu.org
smtpserverport = 587
smtpencryption = tls
*-autoloads.el
#+end_src
+** GnuPG
+:PROPERTIES:
+:header-args+: :tangle ~/.gnupg/gpg-agent.conf
+:END:
+
+#+begin_src conf
+default-cache-ttl 43200
+max-cache-ttl 43200
+
+default-cache-ttl-ssh 10800
+max-cache-ttl-ssh 10800
+
+# pinentry-program /usr/bin/pinentry-qt
+#+end_src
+
+** GTK
+
+*** gtk-2.0
+:PROPERTIES:
+:header-args+: :tangle ~/.gtkrc-2.0
+:END:
+
+#+begin_src conf
+gtk-theme-name="Greybird"
+gtk-icon-theme-name="Paper"
+gtk-font-name="Ubuntu 10"
+gtk-menu-images=0
+# gtk-key-theme-name = "Emacs"
+#+end_src
+
+*** gtk-3.0
+:PROPERTIES:
+:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
+:END:
+
+#+begin_src conf :tangle no
+[Settings]
+gtk-icon-theme-name = Paper
+# gtk-theme-name = Adwaita
+
+gtk-theme-name = Greybird
+# gtk-theme-name = Arc-Darker
+# gtk-theme-name = Numix-ArchBlue
+
+gtk-font-name = Ubuntu 10
+# gtk-key-theme-name = Emacs
+#+end_src
+
** [[https://github.com/Leinnan/i3gs][i3gs]]
:PROPERTIES:
:header-args+: :tangle ~/.config/i3gs/config
:END:
-#+begin_src conf :comments none
+#+begin_src conf :comments none :tangle no
borders_width=0 0 2 0
separator_width=10
borders_color=#FFDC00
separator_width=0
#+end_src
-** Latexmk
+
+** i3status
:PROPERTIES:
-:header-args+: :tangle ~/.latexmkrc
+:header-args+: :tangle ~/.config/i3status/config
:END:
-#+begin_src conf
-$pdf_previewer = "start zathura %O %S";
-$clean_ext = "aux out";
+#+begin_src conf :comments none
+# i3status configuration file.
+# see "man i3status" for documentation.
+
+# It is important that this file is edited as UTF-8.
+# The following line should contain a sharp s:
+# ß
+# If the above line is not correctly displayed, fix your editor first!
+
+general {
+ colors = true
+ interval = 5
+ output_format = "i3bar"
+}
-# $pdf_update_method = 4;
-# $pdf_update_command = "zathura %O %S";
+# order += "ipv6"
+order += "disk /"
+order += "disk /data"
+# order += "wireless _first_"
+order += "ethernet _first_"
+order += "battery 0"
+order += "volume master"
+order += "load"
+order += "tztime local"
+
+wireless _first_ {
+ format_up = "W:%quality %essid %ip"
+ format_down = "W: down"
+}
-# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
-# by Ctrl+click in the PDF.
-# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
-# editor.
-# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
-#+end_src
+ethernet _first_ {
+ # if you use %speed, i3status requires root privileges
+ format_up = "E: %ip (%speed)"
+ format_down = "E: down"
+}
-** libinput
+battery 0 {
+ format = "%status %percentage %remaining (%consumption)"
+ path = "/sys/class/power_supply/BAT%d/uevent"
+ low_threshold = "10"
+ threshold_type = "percentage"
+ last_full_capacity = true
+ integer_battery_capacity = true
+ hide_seconds = true
+}
-Improve XPS 15 9560's touchpad experience.
+tztime local {
+ format = "%-I:%M%P %a %b %d"
+}
-# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
-#+begin_src conf :tangle no
-Section "InputClass"
- Identifier "libinput touchpad catchall"
- Driver "libinput"
- MatchIsTouchpad "on"
- Option "ClickMethod" "clickfinger"
- Option "NaturalScrolling" "true"
- Option "Tapping" "on"
- Option "TappingButtonMap" "lrm"
-EndSection
+volume master {
+ format = "♪ %volume"
+ format_muted = "🔇 %volume"
+ device = "pulse"
+}
+
+load {
+ format = "%1min"
+}
+
+disk "/" {
+ format = "/ %avail"
+}
+
+disk "/data" {
+ format = "/data %avail"
+}
#+end_src
-** getmail
+** isync
-*** getmailrc
+*** mbsyncrc
:PROPERTIES:
-:header-args+: :tangle ~/.getmail/getmailrc
+:header-args+: :tangle ~/.mbsyncrc
:END:
#+begin_src conf
-[retriever]
-type = SimplePOP3SSLRetriever
-server = fencepost.gnu.org
-username = aminb
-password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
-port = 995
-use_apop = True
-
-[destination]
-type = Maildir
-path = ~/mail/gnu/Inbox/
-
-[options]
-delete = True
-#+end_src
-
-*** getmail.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/getmail
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** getmail.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail timer
-
-[Timer]
-OnCalendar=*:0/30
-Persistent=true
-Unit=getmail.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** GnuPG
-:PROPERTIES:
-:header-args+: :tangle ~/.gnupg/gpg-agent.conf
-:END:
-
-#+begin_src conf
-default-cache-ttl 43200
-max-cache-ttl 43200
-
-default-cache-ttl-ssh 10800
-max-cache-ttl-ssh 10800
-
-# pinentry-program /usr/bin/pinentry-qt
-#+end_src
-
-** GTK
-
-*** gtk-2.0
-:PROPERTIES:
-:header-args+: :tangle ~/.gtkrc-2.0
-:END:
-
-#+begin_src conf
-gtk-theme-name="Greybird"
-gtk-icon-theme-name="Paper"
-gtk-font-name="Ubuntu 10"
-gtk-menu-images=0
-# gtk-key-theme-name = "Emacs"
-#+end_src
-
-*** gtk-3.0
-:PROPERTIES:
-:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
-:END:
-
-#+begin_src conf :tangle no
-[Settings]
-gtk-icon-theme-name = Paper
-# gtk-theme-name = Adwaita
-
-gtk-theme-name = Greybird
-# gtk-theme-name = Arc-Darker
-# gtk-theme-name = Numix-ArchBlue
-
-gtk-font-name = Ubuntu 10
-# gtk-key-theme-name = Emacs
-#+end_src
-
-** isync
-
-*** mbsyncrc
-:PROPERTIES:
-:header-args+: :tangle ~/.mbsyncrc
-:END:
-
-#+begin_src conf
-# Global defaults
-CopyArrivalDate yes
+# Global defaults
+CopyArrivalDate yes
+Create Both
+Expunge Both
######
IMAPAccount amin
-Host nix.aminb.org
-User amin@aminb.org
+Host mail.bndl.org
+User amin@bndl.org
PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
SSLType IMAPS
IMAPStore amin-remote
Account amin
-MaildirStore amin-local
-Path ~/mail/amin/
-Inbox ~/mail/amin/Inbox
-SubFolders Verbatim
+IMAPAccount amin-dovecot
+Host 127.0.0.1
+Port 143
+User amin@bndl.org
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
+SSLType None
+
+IMAPStore amin-local
+Account amin-dovecot
Channel amin
Master :amin-remote:
Slave :amin-local:
-Patterns * !dovecot*
-Create Both
-SyncState *
+Patterns *
######
IMAPAccount uwaterloo
IMAPStore uwaterloo-remote
Account uwaterloo
-MaildirStore uwaterloo-local
-Path ~/mail/uwaterloo/
-Inbox ~/mail/uwaterloo/Inbox
-SubFolders Verbatim
+IMAPAccount uwaterloo-dovecot
+Host 127.0.0.1
+Port 143
+User abandali@uwaterloo.ca
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
+SSLType None
+
+IMAPStore uwaterloo-local
+Account uwaterloo-dovecot
Channel uwaterloo
Master :uwaterloo-remote:
Slave :uwaterloo-local:
-Patterns * !dovecot*
-Create Both
-SyncState *
+Patterns *
+
+######
+IMAPAccount csclub
+Host mail.csclub.uwaterloo.ca
+User abandali
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg"
+SSLType IMAPS
+
+IMAPStore csclub-remote
+Account csclub
+
+IMAPAccount csclub-dovecot
+Host 127.0.0.1
+Port 143
+User abandali@csclub.uw
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-dovecot.gpg"
+SSLType None
+
+IMAPStore csclub-local
+Account csclub-dovecot
+
+Channel csclub
+Master :csclub-remote:
+Slave :csclub-local:
+Patterns *
#+end_src
*** mbsync.service
WantedBy=timers.target
#+end_src
+** Latexmk
+:PROPERTIES:
+:header-args+: :tangle ~/.latexmkrc
+:END:
+
+#+begin_src conf
+$pdf_previewer = "start zathura %O %S";
+$clean_ext = "aux out";
+
+# $pdf_update_method = 4;
+# $pdf_update_command = "zathura %O %S";
+
+# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
+# by Ctrl+click in the PDF.
+# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
+# editor.
+# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
+#+end_src
+
+** libinput
+
+Improve XPS 15 9560's touchpad experience.
+
+# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
+#+begin_src conf :tangle no
+Section "InputClass"
+ Identifier "libinput touchpad catchall"
+ Driver "libinput"
+ MatchIsTouchpad "on"
+ Option "ClickMethod" "clickfinger"
+ Option "NaturalScrolling" "true"
+ Option "Tapping" "on"
+ Option "TappingButtonMap" "lrm"
+EndSection
+#+end_src
+
+** mkinitcpio
+
+#+begin_src conf :tangle /sudo::/etc/mkinitcpio.conf :comments none
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run. Advanced users may wish to specify all system modules
+# in this array. For instance:
+# MODULES=(piix ide_disk reiserfs)
+MODULES=(i915)
+
+# BINARIES
+# This setting includes any additional binaries a given user may
+# wish into the CPIO image. This is run last, so it may be used to
+# override the actual binaries included by a given hook
+# BINARIES are dependency parsed, so you may safely ignore libraries
+BINARIES=()
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in any way. This is useful for config files.
+FILES=()
+
+# HOOKS
+# This is the most important setting in this file. The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+## This setup specifies all modules in the MODULES setting above.
+## No raid, lvm2, or encrypted root is needed.
+# HOOKS=(base)
+#
+## This setup will autodetect all modules for your system and should
+## work as a sane default
+# HOOKS=(base udev autodetect block filesystems)
+#
+## This setup will generate a 'full' image which supports most systems.
+## No autodetection is done.
+# HOOKS=(base udev block filesystems)
+#
+## This setup assembles a pata mdadm array with an encrypted root FS.
+## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
+# HOOKS=(base udev block mdadm encrypt filesystems)
+#
+## This setup loads an lvm2 volume group on a usb device.
+# HOOKS=(base udev block lvm2 filesystems)
+#
+## NOTE: If you have /usr on a separate partition, you MUST include the
+# usr, fsck and shutdown hooks.
+HOOKS=(base udev autodetect modconf block keyboard encrypt lvm2 resume filesystems fsck)
+
+# COMPRESSION
+# Use this to compress the initramfs image. By default, gzip compression
+# is used. Use 'cat' to create an uncompressed image.
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+#COMPRESSION="lzma"
+#COMPRESSION="xz"
+#COMPRESSION="lzop"
+#COMPRESSION="lz4"
+
+# COMPRESSION_OPTIONS
+# Additional options for the compressor
+#COMPRESSION_OPTIONS=()
+#+end_src
+
** mpd
:PROPERTIES:
:header-args+: :tangle ~/.config/mpd/mpd.conf
#tls_trust_file /etc/ssl/certs/ca-certificates.crt
logfile ~/.msmtp.log
-# aminb
-account aminb
-host nix.aminb.org
-tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
+# amin
+account amin
+host mail.bndl.org
+# use `msmtp -a amin --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
+tls_fingerprint B8:17:DF:D7:26:56:4F:CD:F0:51:D5:E5:4C:44:B6:F1:C9:47:E7:A2:C7:36:C9:C1:F2:10:85:18:43:72:9D:ED
tls_starttls on
-from amin@aminb.org
-user amin@aminb.org
+from amin@bndl.org
+user amin@bndl.org
passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
+account aminb : amin
+from amin@aminb.org
+
# gnu
account gnu
host fencepost.gnu.org
# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
+tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4
tls_starttls on
-from aminb@gnu.org
-user aminb
+from bandali@gnu.org
+user bandali
passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
-# gnu (new address)
+# gnu (old)
+account gnu-aminb : gnu
+from aminb@gnu.org
+account gnu-amin : gnu
+from amin@gnu.org
account gnu-mab : gnu
from mab@gnu.org
passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
tls_trust_file /etc/ssl/certs/ca-certificates.crt
+# csclub
+account csclub
+host mail.csclub.uwaterloo.ca
+tls_starttls on
+from abandali@csclub.uwaterloo.ca
+user abandali
+passwordeval gpg2 --no-tty -q -d ~/.passwd/csclub.gpg
+tls_trust_file /etc/ssl/certs/ca-certificates.crt
+
# Set a default account
-account default : aminb
+account default : amin
#+end_src
** ncmpcpp
# configured here named ".notmuch".
#
[database]
-path=/home/amin/mail
+path=/home/amin/oldmail
# User configuration
#
[user]
name=Amin Bandali
primary_email=amin@aminb.org
-other_email=abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
+other_email=bandali@gnu.org;abandali@uwaterloo.ca;
# Configuration for "notmuch new"
#
#+begin_src sh
# apply sent tag to messages sent by me
-notmuch tag -new +sent -- from:amin@aminb.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
+notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
# initial tagging
notmuch tag -latest -- tag:latest
notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
-notmuch tag -inbox +pay -- folder:amin/pay
+notmuch tag -inbox +pay -- folder:amin/pay
notmuch tag -inbox +banking -- folder:amin/banking
+notmuch tag -inbox +work -- folder:amin/work
# </aminb>
# <uw>
-notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
-notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
+notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
+notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
+notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
+notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
+notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
+notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
WantedBy=timers.target
#+end_src
-** offlineimap
+** pacman
-*** offlineimaprc
-:PROPERTIES:
-:header-args+: :tangle ~/.offlineimaprc
-:END:
+*** conf
-#+begin_src conf :tangle no
-[general]
-pythonfile = ~/.offlineimap.py
-accounts = Gmail, aminb
-maxsyncaccounts = 3
+#+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
-[Account Gmail]
-localrepository = GmailL
-remoterepository = GmailR
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir = /
+#DBPath = /var/lib/pacman/
+#CacheDir = /var/cache/pacman/pkg/
+#LogFile = /var/log/pacman.log
+#GPGDir = /etc/pacman.d/gnupg/
+#HookDir = /etc/pacman.d/hooks/
+HoldPkg = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg =
+#IgnoreGroup =
+
+#NoUpgrade =
+#NoExtract =
+
+# Misc options
+#UseSyslog
+Color
+TotalDownload
+CheckSpace
+VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all Arch/Parabola packagers
+# with `pacman-key --populate archlinux` and `pacman-key --populate parabola`.
+
+#
+# REPOSITORIES
+# - can be defined here or included from another file
+# - pacman will search repositories in the order defined here
+# - local/custom mirrors can be added here or in separate files
+# - repositories listed first will take precedence when packages
+# have identical names, regardless of version number
+# - URLs will have $repo replaced by the name of the current repo
+# - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+# [repo-name]
+# Server = ServerName
+# Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+# NOTE: Nonprism is a particular repository that aims to provide software built
+# and patched without services under global data surveillance programs like PRISM,
+# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism
+
+#[nonprism-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[nonprism]
+#Include = /etc/pacman.d/mirrorlist
+
+[libre-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[libre]
+Include = /etc/pacman.d/mirrorlist
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
-[Account aminb]
-localrepository = aminbL
-remoterepository = aminbR
+[core]
+Include = /etc/pacman.d/mirrorlist
-[Repository GmailL]
-type = Maildir
-localfolders = ~/Maildir/Gmail
-
-[Repository GmailR]
-type = IMAP
-remotehost = imap.gmail.com
-remoteusereval = mailuser("gmail")
-remotepasseval = mailpasswd("gmail")
-sslcacertfile = /etc/ssl/certs/ca-certificates.crt
-ssl = yes
-folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
-maxconnections = 1
-realdelete = no
-
-[Repository aminbL]
-type = Maildir
-localfolders = ~/Maildir/aminb
-
-[Repository aminbR]
-type = IMAP
-remotehost = mail.aminb.org
-remoteusereval = mailuser("aminb")
-remotepasseval = mailpasswd("aminb")
-sslcacertfile = /etc/ssl/certs/ca-certificates.crt
-ssl = yes
-folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
-maxconnections = 1
-realdelete = no
-#+end_src
+[extra]
+Include = /etc/pacman.d/mirrorlist
-*** offlineimap.py
-:PROPERTIES:
-:header-args+: :tangle ~/.offlineimap.py
-:END:
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
-#+begin_src python :tangle no
-import os
-import subprocess
+[community]
+Include = /etc/pacman.d/mirrorlist
-def mailpasswd(acct):
- acct = os.path.basename(acct)
- path = "/home/amin/.passwd/%s.gpg" % acct
- args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
- try:
- return subprocess.check_output(args).strip()
- except subprocess.CalledProcessError:
- return ""
-
-def mailuser(acct):
- acct = os.path.basename(acct)
- path = "/home/amin/.passwd/%s" % acct
- args = ["cat", path]
- try:
- return subprocess.check_output(args).strip()
- except subprocess.CalledProcessError:
- return ""
-
-def prime_gpg_agent():
- ret = False
- i = 1
- while not ret:
- ret = (mailpasswd("prime") == "prime")
- if i > 2:
- from offlineimap.ui import getglobalui
- sys.stderr.write("Error reading in passwords. Terminating.\n")
- getglobalui().terminate()
- i += 1
- return ret
-
-prime_gpg_agent()
+# The PCR (Parabola Community Repository) contains packages maintained by trusted
+# members of the Parabola community. It also contains packages maintained by
+# Parabola developers, but that the developer decided didn't belong in core/libre.
+
+#[pcr-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[pcr]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the libre-multilib, multilib and pcr-multilib repositories as required here.
+
+#[nonprism-multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[nonprism-multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+#[libre-multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[libre-multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+#[pcr-multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[pcr-multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+# Parabola also supports another community projects and personal repositories, to
+# find them check out this wiki page: https://wiki.parabola.nu/Repositories
+
+# An example of a custom package repository. See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+
+Include = /etc/pacman.d/*.conf
+#+end_src
+
+*** mirrorlist
+
+#+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none
+# Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017
+
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+
+# Location: London, UK
+# Responsible: Parabola Project
+# Note: Not really a mirror, automatically redirects you to an Arch
+# mirror when possible. Works best specifying it a few times in a
+# row (404s workaround).
+# Server = http://redirector.parabola.nu/$repo/os/$arch
+Server = https://redirector.parabola.nu/$repo/os/$arch
+
+# Location: Reykjavík, Iceland
+# Responsible: Parabola Project
+# Note: Not really a mirror, automatically redirects you to a Parabola
+# mirror that has the file you are looking for.
+# Server = http://repomirror.parabola.nu/$repo/os/$arch
+Server = https://repomirror.parabola.nu/$repo/os/$arch
+
+# Location: Falkenstein, Germany
+# Server = http://mirror.grapentin.org/parabola/$repo/os/$arch
+Server = https://mirror.grapentin.org/parabola/$repo/os/$arch
+
+# Location: Volendam, Netherlands
+Server = https://jeweet.net/repo/parabola/$repo/os/$arch
+
+# Location: Amsterdam, Netherlands
+# Note: Not really a mirror, but a high-speed 10GiB cache for
+# mirror.yandex.ru/mirrors/parabola
+# Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch
+Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch
+
+# Location: Moscow, Russian Federation
+# Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
+Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
+
+# Location: Ho Chi Minh City, Vietnam
+# Server = http://mirror.freedif.org/Parabola/$repo/os/$arch
+Server = https://mirror.freedif.org/Parabola/$repo/os/$arch
+
+# Location: Los Angeles, CA, USA
+# Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE
+Server = http://alfplayer.com/parabola/$repo/os/$arch
+
+# Location: Boston, MA, USA
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+
+# Location: Austin, TX, USA
+# Server = http://parabola.serverpit.com/
+Server = https://parabola.serverpit.com/
+
+# Location: Reykjavík, Iceland
+# Responsible: Parabola Project
+# Note: Currently pointing to repomirror.parabola.nu
+# Server = http://repo.parabola.nu/$repo/os/$arch
+Server = https://repo.parabola.nu/$repo/os/$arch
#+end_src
** pigeonhole
-*** gnu.sieve
+*** amin.sieve
:PROPERTIES:
-:header-args+: :tangle ~/sieve/gnu.sieve :comments none
+:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none
:END:
#+begin_src conf
-require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
+require ["regex", "variables", "fileinto", "envelope",
+ "mailbox", "imap4flags", "include"];
+# webmasters
if anyof (
- address :is "from" "webmasters@gnu.org",
- address :is "from" "webmasters-comment@gnu.org") {
- fileinto :create "webmasters";
+ address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
+ fileinto :create "gnu.webmasters";
stop;
}
*** lists.sieve
:PROPERTIES:
-:header-args+: :tangle ~/sieve/lists.sieve :comments none
+:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none
:END:
#+begin_src conf
-require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
- "include" ];
+require ["regex", "variables", "fileinto", "envelope",
+ "mailbox", "imap4flags", "include"];
+# mailing lists
if anyof (
- header :contains "list-id" "<emacs-devel.gnu.org>",
- header :contains "list-id" "<emacs-orgmode.gnu.org>",
- header :contains "list-id" "<emacsconf-discuss.gnu.org>",
- header :contains "list-id" "<fencepost-users.gnu.org>",
- header :contains "list-id" "<guix-devel.gnu.org>",
- header :contains "list-id" "<guile-devel.gnu.org>",
- header :contains "list-id" "<help-gnu-emacs.gnu.org>",
- header :contains "list-id" "<info-gnu-emacs.gnu.org>",
- header :contains "list-id" "<www-commits.gnu.org>",
- header :contains "list-id" "<www-discuss.gnu.org>",
- header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
- header :contains "list-id" "<haskell-cafe.haskell.org>",
- header :contains "list-id" "<haskell-art.we.lurk.org>",
- header :contains "list-id" "<notmuch.notmuchmail.org>") {
+ header :contains "list-id"
+ [ "<emacs-devel.gnu.org>"
+ , "<emacs-orgmode.gnu.org>"
+ , "<emacsconf-discuss.gnu.org>"
+ , "<fencepost-users.gnu.org>"
+ , "<guix-devel.gnu.org>"
+ , "<guile-devel.gnu.org>"
+ , "<help-gnu-emacs.gnu.org>"
+ , "<info-gnu-emacs.gnu.org>"
+ , "<info-guix.gnu.org>"
+ , "<www-commits.gnu.org>"
+ , "<www-discuss.gnu.org>"
+ , "<deepspec.lists.cs.princeton.edu>"
+ , "<haskell-cafe.haskell.org>"
+ , "<haskell-art.we.lurk.org>"
+ , "<notmuch.notmuchmail.org>"
+ ] ) {
if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
set :lower "listname" "${1}";
- fileinto :create "l/${listname}";
+ fileinto :create "gnu.${listname}";
+ stop;
}
}
+# sr.ht lists, with dots ('.') omitted
if anyof (
- header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
- if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
+ header :contains "list-id"
+ [ "<~bandali/public-inbox@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
+ ] ) {
+ if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
set :lower "username" "${1}";
- set :lower "listname" "${2}";
- fileinto :create "l/${username}/${listname}";
+ set :lower "listname" "${2}${3}${4}${5}${6}${7}";
+ fileinto :create "gnu.${username}.${listname}";
+ stop;
}
}
#+end_src
-** polybar
-
-*** config
-:PROPERTIES:
-:header-args+: :tangle ~/.config/polybar/config
-:END:
-
-#+begin_src conf :tangle no
-;=====================================================
-;
-; To learn more about how to configure Polybar
-; go to https://github.com/jaagr/polybar
-;
-; The README contains alot of information
-;
-;=====================================================
-
-[colors]
-;background = ${xrdb:color0:#222}
-background = #222
-background-alt = #444
-;foreground = ${xrdb:color7:#222}
-foreground = #eee
-foreground-alt = #888
-primary = #ffb52a
-secondary = #e60053
-alert = #bd2c40
-
-[bar/main]
-;monitor = ${env:MONITOR:HDMI-1}
-width = 100%
-height = 27
-;offset-x = 1%
-;offset-y = 1%
-radius = 3.0
-fixed-center = true
-
-background = ${colors.background}
-foreground = ${colors.foreground}
-
-line-size = 3
-line-color = #f00
-
-border-size = 4
-border-color = #00000000
-
-padding-left = 0
-padding-right = 2
-
-module-margin-left = 2
-module-margin-right = 2
-
-font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
-font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
-font-2 = Wuncon Siji:pixelsize=10;1
-font-3 = FontAwesome:pixelsize=10;1
-
-modules-left = bspwm xwindow
-modules-center =
-modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
-
-tray-position = right
-tray-padding = 1
-;tray-transparent = true
-;tray-background = #0063ff
-tray-maxsize = 18
-
-wm-restack = bspwm
-
-;override-redirect = true
-
-scroll-up = bspwm-desknext
-scroll-down = bspwm-deskprev
-
-[module/xwindow]
-type = internal/xwindow
-label = %title:0:50:...%
-
-[module/xkeyboard]
-type = internal/xkeyboard
-blacklist-0 = num lock
-
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-prefix-underline = ${colors.secondary}
-
-label-layout = %layout%
-label-layout-underline = ${colors.secondary}
-
-label-indicator-padding = 2
-label-indicator-margin = 1
-label-indicator-background = ${colors.secondary}
-label-indicator-underline = ${colors.secondary}
-
-[module/filesystem]
-type = internal/fs
-interval = 25
-
-mount-0 = /
-
-label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
-label-unmounted = %mountpoint% not mounted
-label-unmounted-foreground = ${colors.foreground-alt}
-
-[module/bspwm]
-type = internal/bspwm
-
-label-focused = %index%
-label-focused-background = ${colors.background-alt}
-label-focused-underline= ${colors.primary}
-label-focused-padding = 2
-
-label-occupied = %index%
-label-occupied-padding = 2
-
-label-urgent = %index%!
-label-urgent-background = ${colors.alert}
-label-urgent-padding = 2
-
-label-empty = %index%
-label-empty-foreground = ${colors.foreground-alt}
-label-empty-padding = 2
-
-[module/i3]
-type = internal/i3
-format = <label-state> <label-mode>
-index-sort = true
-wrapping-scroll = false
-
-; Only show workspaces on the same output as the bar
-;pin-workspaces = true
-
-label-mode-padding = 2
-label-mode-foreground = #000
-label-mode-background = ${colors.primary}
-
-; focused = Active workspace on focused monitor
-label-focused = %index%
-label-focused-background = ${module/bspwm.label-focused-background}
-label-focused-underline = ${module/bspwm.label-focused-underline}
-label-focused-padding = ${module/bspwm.label-focused-padding}
-
-; unfocused = Inactive workspace on any monitor
-label-unfocused = %index%
-label-unfocused-padding = ${module/bspwm.label-occupied-padding}
-
-; visible = Active workspace on unfocused monitor
-label-visible = %index%
-label-visible-background = ${self.label-focused-background}
-label-visible-underline = ${self.label-focused-underline}
-label-visible-padding = ${self.label-focused-padding}
-
-; urgent = Workspace with urgency hint set
-label-urgent = %index%
-label-urgent-background = ${module/bspwm.label-urgent-background}
-label-urgent-padding = ${module/bspwm.label-urgent-padding}
-
-[module/mpd]
-type = internal/mpd
-format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
-
-icon-prev =
-icon-stop =
-icon-play =
-icon-pause =
-icon-next =
-
-label-song-maxlen = 25
-label-song-ellipsis = true
-
-[module/xbacklight]
-type = internal/xbacklight
-
-format = <label> <bar>
-label = BL
-
-bar-width = 10
-bar-indicator = |
-bar-indicator-foreground = #ff
-bar-indicator-font = 2
-bar-fill = ─
-bar-fill-font = 2
-bar-fill-foreground = #9f78e1
-bar-empty = ─
-bar-empty-font = 2
-bar-empty-foreground = ${colors.foreground-alt}
-
-[module/backlight-acpi]
-inherit = module/xbacklight
-type = internal/backlight
-;card = intel_backlight
-card = mba6x_backlight
-
-[module/cpu]
-type = internal/cpu
-interval = 2
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #f90000
-label = %percentage%%
-
-[module/memory]
-type = internal/memory
-interval = 2
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #4bffdc
-label = %percentage_used%%
-
-[module/wlan]
-type = internal/network
-interface =
-interval = 3.0
-
-format-connected = <ramp-signal> <label-connected>
-format-connected-underline = #9f78e1
-label-connected = %essid%
-
-format-disconnected =
-;format-disconnected = <label-disconnected>
-;format-disconnected-underline = ${self.format-connected-underline}
-;label-disconnected = %ifname% disconnected
-;label-disconnected-foreground = ${colors.foreground-alt}
-
-ramp-signal-0 =
-ramp-signal-1 =
-ramp-signal-2 =
-ramp-signal-3 =
-ramp-signal-4 =
-ramp-signal-foreground = ${colors.foreground-alt}
-
-[module/eth]
-type = internal/network
-interface =
-interval = 3.0
-
-format-connected-underline = #55aa55
-format-connected-prefix = " "
-format-connected-prefix-foreground = ${colors.foreground-alt}
-label-connected = %local_ip%
-
-format-disconnected =
-;format-disconnected = <label-disconnected>
-;format-disconnected-underline = ${self.format-connected-underline}
-;label-disconnected = %ifname% disconnected
-;label-disconnected-foreground = ${colors.foreground-alt}
-
-[module/date]
-type = internal/date
-interval = 5
-
-date =
-date-alt = " %Y-%m-%d"
-
-time = %H:%M
-time-alt = %H:%M:%S
-
-format-prefix =
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #0a6cf5
-
-label = %date% %time%
-
-[module/volume]
-type = internal/volume
-
-format-volume = <label-volume> <bar-volume>
-label-volume = vol
-label-volume-foreground = ${root.foreground}
-
-format-muted-prefix = " "
-format-muted-foreground = ${colors.foreground-alt}
-label-muted = mute
-
-bar-volume-width = 10
-bar-volume-foreground-0 = #55aa55
-bar-volume-foreground-1 = #55aa55
-bar-volume-foreground-2 = #55aa55
-bar-volume-foreground-3 = #55aa55
-bar-volume-foreground-4 = #55aa55
-bar-volume-foreground-5 = #f5a70a
-bar-volume-foreground-6 = #ff5555
-bar-volume-gradient = false
-bar-volume-indicator = |
-bar-volume-indicator-font = 2
-bar-volume-fill = ─
-bar-volume-fill-font = 2
-bar-volume-empty = ─
-bar-volume-empty-font = 2
-bar-volume-empty-foreground = ${colors.foreground-alt}
-
-[module/battery]
-type = internal/battery
-battery = BAT0
-adapter = ADP1
-full-at = 64
-
-format-charging = <animation-charging> <label-charging>
-format-charging-underline = #ffb52a
-
-format-discharging = <ramp-capacity> <label-discharging>
-format-discharging-underline = ${self.format-charging-underline}
-
-format-full-prefix = " "
-format-full-prefix-foreground = ${colors.foreground-alt}
-format-full-underline = ${self.format-charging-underline}
-
-ramp-capacity-0 =
-ramp-capacity-1 =
-ramp-capacity-2 =
-ramp-capacity-foreground = ${colors.foreground-alt}
-
-animation-charging-0 =
-animation-charging-1 =
-animation-charging-2 =
-animation-charging-foreground = ${colors.foreground-alt}
-animation-charging-framerate = 750
-
-[module/temperature]
-type = internal/temperature
-thermal-zone = 1
-warn-temperature = 66
-
-format = <ramp> <label>
-format-underline = #f50a4d
-format-warn = <ramp> <label-warn>
-format-warn-underline = ${self.format-underline}
-
-label = %temperature%
-label-warn = %temperature%
-label-warn-foreground = ${colors.secondary}
-
-ramp-0 =
-ramp-1 =
-ramp-2 =
-ramp-foreground = ${colors.foreground-alt}
-
-[module/powermenu]
-type = custom/menu
-
-format-spacing = 1
-
-label-open =
-label-open-foreground = ${colors.secondary}
-label-close = cancel
-label-close-foreground = ${colors.secondary}
-label-separator = |
-label-separator-foreground = ${colors.foreground-alt}
-
-menu-0-0 = reboot
-menu-0-0-exec = menu-open-1
-menu-0-1 = power off
-menu-0-1-exec = menu-open-2
-
-menu-1-0 = cancel
-menu-1-0-exec = menu-open-0
-menu-1-1 = reboot
-menu-1-1-exec = sudo reboot
-
-menu-2-0 = power off
-menu-2-0-exec = sudo poweroff
-menu-2-1 = cancel
-menu-2-1-exec = menu-open-0
-
-[module/mail]
-type = custom/script
-interval = 60
-format = <label>
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #0a6cf5
-exec = notmuch count tag:unread
-
-[settings]
-screenchange-reload = true
-;compositing-background = xor
-;compositing-background = screen
-;compositing-foreground = source
-;compositing-border = over
-
-[global/wm]
-margin-top = 0
-margin-bottom = 0
-
-; vim:ft=dosini
-#+end_src
-
-*** polybar-launch
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
-:END:
-
-#+begin_src sh :tangle no
-# Terminate already running bar instances
-killall -q polybar
-
-# Wait until the processes have been shut down
-while pgrep -x polybar >/dev/null; do sleep 1; done
-
-# Launch main bar
-polybar main &
-
-echo "Bars launched..."
-#+end_src
-
** PowerTOP
:PROPERTIES:
:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
WantedBy=multi-user.target
#+end_src
-** ranger
-
-*** rc.conf
+** redshift
:PROPERTIES:
-:header-args+: :tangle ~/.config/ranger/rc.conf
+:header-args+: :tangle ~/.config/redshift.conf :comments none
:END:
-#+begin_src conf :tangle no
-# ===================================================================
-# This file contains the default startup commands for ranger.
-# To change them, it is recommended to create the file
-# ~/.config/ranger/rc.conf and add your custom commands there.
-#
-# If you copy this whole file there, you may want to set the environment
-# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
-#
-# The purpose of this file is mainly to define keybindings and settings.
-# For running more complex python code, please create a plugin in "plugins/" or
-# a command in "commands.py".
-#
-# Each line is a command that will be run before the user interface
-# is initialized. As a result, you can not use commands which rely
-# on the UI such as :delete or :mark.
-# ===================================================================
-
-# ===================================================================
-# == Options
-# ===================================================================
-
-# How many columns are there, and what are their relative widths?
-set column_ratios 1,3,4
-
-# Which files should be hidden? (regular expression)
-set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
+#+begin_src conf
+; Global settings for redshift
+[redshift]
+; Set the day and night screen temperatures (Neutral is 6500K)
+;temp-day=5700
+;temp-night=3500
-# Show hidden files? You can toggle this by typing 'zh'
-set show_hidden false
+;temp-day=6500
+temp-day=6200
+;temp-night=4800
+;temp-night=5000
+;temp-night=4500
+temp-night=4000
-# Ask for a confirmation when running the "delete" command?
-# Valid values are "always" (default), "never", "multiple"
-# With "multiple", ranger will ask only if you delete multiple files at once.
-set confirm_on_delete multiple
+; Enable/Disable a smooth transition between day and night
+; 0 will cause a direct change from day to night screen temperature.
+; 1 will gradually increase or decrease the screen temperature.
+transition=1
-# Which script is used to generate file previews?
-# ranger ships with scope.sh, a script that calls external programs (see
-# README for dependencies) to preview images, archives, etc.
-set preview_script ~/.config/ranger/scope.sh
+; Set the screen brightness. Default is 1.0.
+;brightness=0.9
+; It is also possible to use different settings for day and night
+; since version 1.8.
+;brightness-day=0.7
+;brightness-night=0.4
+; Set the screen gamma (for all colors, or each color channel
+; individually)
+;gamma=0.8
+;gamma=1.0
+;gamma=0.8:0.7:0.8
+; This can also be set individually for day and night since
+; version 1.10.
+;gamma-day=0.8:0.7:0.8
+;gamma-night=0.6
-# Use the external preview script or display simple plain text previews?
-set use_preview_script true
-
-# Open all images in this directory when running certain image viewers
-# like feh or sxiv? You can still open selected files by marking them.
-set open_all_images true
-
-# Be aware of version control systems and display information.
-set vcs_aware false
-
-# State of the three backends git, hg, bzr. The possible states are
-# disabled, local (only show local info), enabled (show local and remote
-# information).
-set vcs_backend_git enabled
-set vcs_backend_hg disabled
-set vcs_backend_bzr disabled
-
-# Preview images in full color with the external command "w3mimgpreview"?
-# This requires the console web browser "w3m" and a supported terminal.
-# It has been successfully tested with "xterm" and "urxvt" without tmux.
-set preview_images true
-
-# Use a unicode "..." character to mark cut-off filenames?
-set unicode_ellipsis false
-
-# Show dotfiles in the bookmark preview box?
-set show_hidden_bookmarks true
-
-# Which colorscheme to use? These colorschemes are available by default:
-# default, jungle, snow
-set colorscheme default
-
-# Preview files on the rightmost column?
-# And collapse (shrink) the last column if there is nothing to preview?
-set preview_files true
-set preview_directories true
-set collapse_preview true
-
-# Save the console history on exit?
-set save_console_history true
-
-# Draw the status bar on top of the browser window (default: bottom)
-set status_bar_on_top false
-
-# Draw a progress bar in the status bar which displays the average state of all
-# currently running tasks which support progress bars?
-set draw_progress_bar_in_status_bar true
-
-# Draw borders around columns?
-set draw_borders true
-
-# Display the directory name in tabs?
-set dirname_in_tabs false
-
-# Enable the mouse support?
-set mouse_enabled true
-
-# Display the file size in the main column or status bar?
-set display_size_in_main_column true
-set display_size_in_status_bar true
-
-# Display files tags in all columns or only in main column?
-set display_tags_in_all_columns true
-
-# Set a title for the window?
-set update_title false
-
-# Set the title to "ranger" in the tmux program?
-set update_tmux_title false
-
-# Shorten the title if it gets long? The number defines how many
-# directories are displayed at once, 0 turns off this feature.
-set shorten_title 3
-
-# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
-set tilde_in_titlebar false
-
-# How many directory-changes or console-commands should be kept in history?
-set max_history_size 20
-set max_console_history_size 50
-
-# Try to keep so much space between the top/bottom border when scrolling:
-set scroll_offset 8
-
-# Flush the input after each key hit? (Noticable when ranger lags)
-set flushinput true
-
-# Padding on the right when there's no preview?
-# This allows you to click into the space to run the file.
-set padding_right true
-
-# Save bookmarks (used with mX and `X) instantly?
-# This helps to synchronize bookmarks between multiple ranger
-# instances but leads to *slight* performance loss.
-# When false, bookmarks are saved when ranger is exited.
-set autosave_bookmarks true
-
-# You can display the "real" cumulative size of directories by using the
-# command :get_cumulative_size or typing "dc". The size is expensive to
-# calculate and will not be updated automatically. You can choose
-# to update it automatically though by turning on this option:
-set autoupdate_cumulative_size false
-
-# Turning this on makes sense for screen readers:
-set show_cursor false
-
-# One of: size, basename, mtime, type
-set sort natural
-
-# Additional sorting options
-set sort_reverse false
-set sort_case_insensitive true
-set sort_directories_first true
-
-# Enable this if key combinations with the Alt Key don't work for you.
-# (Especially on xterm)
-set xterm_alt_key false
-
-# ===================================================================
-# == Local Options
-# ===================================================================
-# You can set local options that only affect a single directory.
-
-# Examples:
-# setlocal path=~/downloads sort mtime
-
-# ===================================================================
-# == Command Aliases in the Console
-# ===================================================================
-
-alias e edit
-alias q quit
-alias q! quitall
-alias qall quitall
-alias setl setlocal
-
-alias filter scout -prt
-alias find scout -aet
-alias mark scout -mr
-alias unmark scout -Mr
-alias search scout -rs
-alias search_inc scout -rts
-alias travel scout -aefiklst
-
-# ===================================================================
-# == Define keys for the browser
-# ===================================================================
-
-# Basic
-map Q quit!
-map q quit
-copymap q ZZ ZQ
-
-map R reload_cwd
-map <C-r> reset
-map <C-l> redraw_window
-map <C-c> abort
-map <esc> change_mode normal
-
-map i display_file
-map ? help
-map W display_log
-map w taskview_open
-map S shell $SHELL
-
-map : console
-map ; console
-map ! console shell
-map @ console -p6 shell %%s
-map # console shell -p
-map s console shell
-map r chain draw_possible_programs; console open_with
-map f console find
-map cd console cd
-
-# Tagging / Marking
-map t tag_toggle
-map ut tag_remove
-map "<any> tag_toggle tag=%any
-map <Space> mark_files toggle=True
-map v mark_files all=True toggle=True
-map uv mark_files all=True val=False
-map V toggle_visual_mode
-map uV toggle_visual_mode reverse=True
-
-# For the nostalgics: Midnight Commander bindings
-map <F1> help
-map <F3> display_file
-map <F4> edit
-map <F5> copy
-map <F6> cut
-map <F7> console mkdir
-map <F8> console delete
-map <F10> exit
-
-# In case you work on a keyboard with dvorak layout
-map <UP> move up=1
-map <DOWN> move down=1
-map <LEFT> move left=1
-map <RIGHT> move right=1
-map <HOME> move to=0
-map <END> move to=-1
-map <PAGEDOWN> move down=1 pages=True
-map <PAGEUP> move up=1 pages=True
-map <CR> move right=1
-map <DELETE> console delete
-map <INSERT> console touch
-
-# VIM-like
-copymap <UP> k
-copymap <DOWN> j
-copymap <LEFT> h
-copymap <RIGHT> l
-copymap <HOME> gg
-copymap <END> G
-copymap <PAGEDOWN> <C-F>
-copymap <PAGEUP> <C-B>
-
-map J move down=0.5 pages=True
-map K move up=0.5 pages=True
-copymap J <C-D>
-copymap K <C-U>
-
-# Jumping around
-map H history_go -1
-map L history_go 1
-map ] move_parent 1
-map [ move_parent -1
-map } traverse
-
-map gh cd ~
-map ge cd /etc
-map gu cd /usr
-map gd cd /dev
-map gl cd -r .
-map gL cd -r %f
-map go cd /opt
-map gv cd /var
-map gm cd /media
-map gM cd /mnt
-map gs cd /srv
-map gr cd /
-map gR eval fm.cd(ranger.RANGERDIR)
-map g/ cd /
-map g? cd /usr/share/doc/ranger
-
-# External Programs
-map E edit
-map du shell -p du --max-depth=1 -h --apparent-size
-map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
-map yp shell -d echo -n %d/%f | xsel -i
-map yd shell -d echo -n %d | xsel -i
-map yn shell -d echo -n %f | xsel -i
-
-# Filesystem Operations
-map = chmod
-
-map cw console rename
-map A eval fm.open_console('rename ' + fm.thisfile.basename)
-map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
-
-map pp paste
-map po paste overwrite=True
-map pl paste_symlink relative=False
-map pL paste_symlink relative=True
-map phl paste_hardlink
-map pht paste_hardlinked_subtree
-
-map dd cut
-map ud uncut
-map da cut mode=add
-map dr cut mode=remove
-
-map yy copy
-map uy uncut
-map ya copy mode=add
-map yr copy mode=remove
-
-# Temporary workarounds
-map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
-map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
-map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
-map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
-map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
-map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
-map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
-map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
-
-# Searching
-map / console search
-map n search_next
-map N search_next forward=False
-map ct search_next order=tag
-map cs search_next order=size
-map ci search_next order=mimetype
-map cc search_next order=ctime
-map cm search_next order=mtime
-map ca search_next order=atime
-
-# Tabs
-map <C-n> tab_new ~
-map <C-w> tab_close
-map <TAB> tab_move 1
-map <S-TAB> tab_move -1
-map <A-Right> tab_move 1
-map <A-Left> tab_move -1
-map gt tab_move 1
-map gT tab_move -1
-map gn tab_new ~
-map gc tab_close
-map uq tab_restore
-map <a-1> tab_open 1
-map <a-2> tab_open 2
-map <a-3> tab_open 3
-map <a-4> tab_open 4
-map <a-5> tab_open 5
-map <a-6> tab_open 6
-map <a-7> tab_open 7
-map <a-8> tab_open 8
-map <a-9> tab_open 9
-
-# Sorting
-map or toggle_option sort_reverse
-map os chain set sort=size; set sort_reverse=False
-map ob chain set sort=basename; set sort_reverse=False
-map on chain set sort=natural; set sort_reverse=False
-map om chain set sort=mtime; set sort_reverse=False
-map oc chain set sort=ctime; set sort_reverse=False
-map oa chain set sort=atime; set sort_reverse=False
-map ot chain set sort=type; set sort_reverse=False
-
-map oS chain set sort=size; set sort_reverse=True
-map oB chain set sort=basename; set sort_reverse=True
-map oN chain set sort=natural; set sort_reverse=True
-map oM chain set sort=mtime; set sort_reverse=True
-map oC chain set sort=ctime; set sort_reverse=True
-map oA chain set sort=atime; set sort_reverse=True
-map oT chain set sort=type; set sort_reverse=True
-
-map dc get_cumulative_size
-
-# Settings
-map zc toggle_option collapse_preview
-map zd toggle_option sort_directories_first
-map zh toggle_option show_hidden
-map <C-h> toggle_option show_hidden
-map zi toggle_option flushinput
-map zm toggle_option mouse_enabled
-map zp toggle_option preview_files
-map zP toggle_option preview_directories
-map zs toggle_option sort_case_insensitive
-map zu toggle_option autoupdate_cumulative_size
-map zv toggle_option use_preview_script
-map zf console filter
-
-# Bookmarks
-map `<any> enter_bookmark %any
-map '<any> enter_bookmark %any
-map m<any> set_bookmark %any
-map um<any> unset_bookmark %any
-
-map m<bg> draw_bookmarks
-copymap m<bg> um<bg> `<bg> '<bg>
-
-# Generate all the chmod bindings with some python help:
-eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
-
-eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
-
-# ===================================================================
-# == Define keys for the console
-# ===================================================================
-# Note: Unmapped keys are passed directly to the console.
-
-# Basic
-cmap <tab> eval fm.ui.console.tab()
-cmap <s-tab> eval fm.ui.console.tab(-1)
-cmap <ESC> eval fm.ui.console.close()
-cmap <CR> eval fm.ui.console.execute()
-cmap <C-l> redraw_window
-
-copycmap <ESC> <C-c>
-copycmap <CR> <C-j>
-
-# Move around
-cmap <up> eval fm.ui.console.history_move(-1)
-cmap <down> eval fm.ui.console.history_move(1)
-cmap <left> eval fm.ui.console.move(left=1)
-cmap <right> eval fm.ui.console.move(right=1)
-cmap <home> eval fm.ui.console.move(right=0, absolute=True)
-cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
-
-# Line Editing
-cmap <backspace> eval fm.ui.console.delete(-1)
-cmap <delete> eval fm.ui.console.delete(0)
-cmap <C-w> eval fm.ui.console.delete_word()
-cmap <C-k> eval fm.ui.console.delete_rest(1)
-cmap <C-u> eval fm.ui.console.delete_rest(-1)
-cmap <C-y> eval fm.ui.console.paste()
-
-# And of course the emacs way
-copycmap <up> <C-p>
-copycmap <down> <C-n>
-copycmap <left> <C-b>
-copycmap <right> <C-f>
-copycmap <home> <C-a>
-copycmap <end> <C-e>
-copycmap <delete> <C-d>
-copycmap <backspace> <C-h>
-
-# Note: There are multiple ways to express backspaces. <backspace> (code 263)
-# and <backspace2> (code 127). To be sure, use both.
-copycmap <backspace> <backspace2>
-
-# This special expression allows typing in numerals:
-cmap <allow_quantifiers> false
-
-# ===================================================================
-# == Pager Keybindings
-# ===================================================================
-
-# Movement
-pmap <down> pager_move down=1
-pmap <up> pager_move up=1
-pmap <left> pager_move left=4
-pmap <right> pager_move right=4
-pmap <home> pager_move to=0
-pmap <end> pager_move to=-1
-pmap <pagedown> pager_move down=1.0 pages=True
-pmap <pageup> pager_move up=1.0 pages=True
-pmap <C-d> pager_move down=0.5 pages=True
-pmap <C-u> pager_move up=0.5 pages=True
-
-copypmap <UP> k <C-p>
-copypmap <DOWN> j <C-n> <CR>
-copypmap <LEFT> h
-copypmap <RIGHT> l
-copypmap <HOME> g
-copypmap <END> G
-copypmap <C-d> d
-copypmap <C-u> u
-copypmap <PAGEDOWN> n f <C-F> <Space>
-copypmap <PAGEUP> p b <C-B>
-
-# Basic
-pmap <ESC> pager_close
-copypmap <ESC> q Q i <F3>
-pmap E edit_file
-
-# ===================================================================
-# == Taskview Keybindings
-# ===================================================================
-
-# Movement
-tmap <up> taskview_move up=1
-tmap <down> taskview_move down=1
-tmap <home> taskview_move to=0
-tmap <end> taskview_move to=-1
-tmap <pagedown> taskview_move down=1.0 pages=True
-tmap <pageup> taskview_move up=1.0 pages=True
-tmap <C-d> taskview_move down=0.5 pages=True
-tmap <C-u> taskview_move up=0.5 pages=True
-
-copytmap <UP> k <C-p>
-copytmap <DOWN> j <C-n> <CR>
-copytmap <HOME> g
-copytmap <END> G
-copytmap <C-u> u
-copytmap <PAGEDOWN> n f <C-F> <Space>
-copytmap <PAGEUP> p b <C-B>
-
-# Changing priority and deleting tasks
-tmap J eval -q fm.ui.taskview.task_move(-1)
-tmap K eval -q fm.ui.taskview.task_move(0)
-tmap dd eval -q fm.ui.taskview.task_remove()
-tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
-tmap <pageup> eval -q fm.ui.taskview.task_move(0)
-tmap <delete> eval -q fm.ui.taskview.task_remove()
-
-# Basic
-tmap <ESC> taskview_close
-copytmap <ESC> q Q w <C-c>
-#+end_src
-
-*** scope.sh
-:PROPERTIES:
-:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
-:END:
-
-#+begin_src sh :tangle no
-# ranger supports enhanced previews. If the option "use_preview_script"
-# is set to True and this file exists, this script will be called and its
-# output is displayed in ranger. ANSI color codes are supported.
-
-# NOTES: This script is considered a configuration file. If you upgrade
-# ranger, it will be left untouched. (You must update it yourself.)
-# Also, ranger disables STDIN here, so interactive scripts won't work properly
-
-# Meanings of exit codes:
-# code | meaning | action of ranger
-# -----+------------+-------------------------------------------
-# 0 | success | success. display stdout as preview
-# 1 | no preview | failure. display no preview at all
-# 2 | plain text | display the plain content of the file
-# 3 | fix width | success. Don't reload when width changes
-# 4 | fix height | success. Don't reload when height changes
-# 5 | fix both | success. Don't ever reload
-
-# Meaningful aliases for arguments:
-path="$1" # Full path of the selected file
-width="$2" # Width of the preview pane (number of fitting characters)
-height="$3" # Height of the preview pane (number of fitting characters)
-
-maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
-
-# Find out something about the file:
-mimetype=$(file --mime-type -Lb "$path")
-extension=${path##*.}
-
-# Functions:
-# runs a command and saves its output into $output. Useful if you need
-# the return value AND want to use the output in a pipe
-try() { output=$(eval '"$@"'); }
-
-# writes the output of the previouosly used "try" command
-dump() { echo "$output"; }
-
-# a common post-processing function used after most commands
-trim() { head -n "$maxln"; }
-
-# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
-highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
-
-case "$extension" in
- # Archive extensions:
- 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
- rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
- try als "$path" && { dump | trim; exit 0; }
- try acat "$path" && { dump | trim; exit 3; }
- try bsdtar -lf "$path" && { dump | trim; exit 0; }
- exit 1;;
- rar)
- try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
- # PDF documents:
- pdf)
- try pdftotext -l 10 -nopgbrk -q "$path" - && \
- { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
- # BitTorrent Files
- torrent)
- try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
- # HTML Pages:
- htm|html|xhtml)
- try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
- try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
- try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
- ;; # fall back to highlight/cat if the text browsers fail
-esac
-
-case "$mimetype" in
- # Syntax highlight for text files:
- text/* | */xml)
- try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
- # Ascii-previews of images:
- image/*)
- img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
- # Display information about media files:
- video/* | audio/*)
- exiftool "$path" && exit 5
- # Use sed to remove spaces so the output fits into the narrow window
- try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
-esac
-
-exit 1
-#+end_src
-
-** redshift
-:PROPERTIES:
-:header-args+: :tangle ~/.config/redshift.conf :comments none
-:END:
-
-#+begin_src conf
-; Global settings for redshift
-[redshift]
-; Set the day and night screen temperatures (Neutral is 6500K)
-;temp-day=5700
-;temp-night=3500
-
-;temp-day=6500
-temp-day=6200
-;temp-night=4800
-;temp-night=5000
-;temp-night=4500
-temp-night=4000
-
-; Enable/Disable a smooth transition between day and night
-; 0 will cause a direct change from day to night screen temperature.
-; 1 will gradually increase or decrease the screen temperature.
-transition=1
-
-; Set the screen brightness. Default is 1.0.
-;brightness=0.9
-; It is also possible to use different settings for day and night
-; since version 1.8.
-;brightness-day=0.7
-;brightness-night=0.4
-; Set the screen gamma (for all colors, or each color channel
-; individually)
-;gamma=0.8
-;gamma=1.0
-;gamma=0.8:0.7:0.8
-; This can also be set individually for day and night since
-; version 1.10.
-;gamma-day=0.8:0.7:0.8
-;gamma-night=0.6
-
-; Set the location-provider: 'geoclue2' or 'manual'
-; type 'redshift -l list' to see possible values.
-; The location provider settings are in a different section.
-;location-provider=manual
-location-provider=geoclue2
+; Set the location-provider: 'geoclue2' or 'manual'
+; type 'redshift -l list' to see possible values.
+; The location provider settings are in a different section.
+;location-provider=manual
+location-provider=geoclue2
; Set the adjustment-method: 'randr', 'vidmode'
; type 'redshift -m list' to see all possible values.
:END:
#+begin_src conf
-rofi.font: Ubuntu Mono 13
+! rofi.font: Ubuntu Mono 13
! rofi.font: Inconsolata 16
! rofi.font: Iosevka 13
! rofi.font: Source Code Pro 11
+rofi.font: Source Code Pro 10.5
rofi.modi: run,window
! rofi.width: 640
rofi.width: 600
# Options for generating new password entries
# default_user is also used for password files that have no user field.
default_user=aminb
-default_user2=aminban
+default_user2=bandali
password_length=30
# Custom Keybindings
#+end_src
** sway
+
+*** main
:PROPERTIES:
:header-args+: :tangle ~/.config/sway/config
:END:
#+begin_src conf
-exec xrdb .Xresources
-exec dunst
### Variables
# super
set $mod Mod4
# You can get the names of your outputs by running: swaymsg -t get_outputs
### Idle configuration
-#
-# Example configuration:
-#
-#exec swayidle \
-# timeout 300 'swaylock -c 000000' \
-# timeout 600 'swaymsg "output * dpms off"' \
-# resume 'swaymsg "output * dpms on"' \
-# before-sleep 'swaylock -c 000000'
-#
-# This will lock your screen after 300 seconds of inactivity, then turn off
-# your displays after another 600 seconds, and turn your screens back on when
-# resumed. It will also lock your screen before your computer goes to sleep.
-### Input configuration
-
-input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
- dwt enabled
- tap enabled
- natural_scroll enabled
- middle_emulation enabled
- click_method clickfinger
-}
-
-input "1:1:AT_Translated_Set_2_keyboard" {
- repeat_delay 200
- repeat_rate 45
- xkb_layout us,ir
- xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
-}
+exec swayidle \
+ timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
+ resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
### Key bindings
# Basics:
#
# start a terminal
- bindsym $mod+Return exec $term
+ bindsym $mod+Return exec $term -name floating
+ bindsym $mod+Shift+Return exec $term
+ for_window [class="URxvt" instance="floating"] floating enable
# kill focused window
bindsym $mod+Shift+q kill
# start your launcher
bindsym $mod+d exec $menu
+ # password manager
+ bindsym $mod2+space exec rofi-pass
+
# Drag floating windows by holding down $mod and left mouse button.
# Resize them with right mouse button + $mod.
# Despite the name, also works for non-floating windows.
# mouse button for dragging.
floating_modifier $mod normal
- # reload the configuration file
- bindsym $mod+Shift+c reload
+ # reload the configuration file
+ bindsym $mod+Shift+c reload
+
+ # exit sway (logs you out of your wayland session)
+ # bindsym $mod+Shift+e exit
+
+ bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
+ bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
+ bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
+
+ bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
+ bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
+ bindsym XF86AudioMute exec pamixer --toggle-mute
+ bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
+
+ bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
+
+ # original sway workspace switch and window move
+ bindsym $mod+bracketleft workspace prev
+ bindsym $mod+bracketright workspace next
+ bindsym $mod+braceleft move container to workspace prev
+ bindsym $mod+braceright move container to workspace next
+
+ # bspwm-esque workspace switch and window move
+ bindsym $mod2+bracketleft exec sway-ws-util switch prev
+ bindsym $mod2+bracketright exec sway-ws-util switch next
+ bindsym $mod2+braceleft exec sway-ws-util move prev follow
+ bindsym $mod2+braceright exec sway-ws-util move next follow
+#
+# Moving around:
+#
+ # Move your focus around
+ bindsym $mod+$left focus left
+ bindsym $mod+$down focus down
+ bindsym $mod+$up focus up
+ bindsym $mod+$right focus right
+ # or use $mod+[up|down|left|right]
+ bindsym $mod+Left focus left
+ bindsym $mod+Down focus down
+ bindsym $mod+Up focus up
+ bindsym $mod+Right focus right
+
+ # _move_ the focused window with the same, but add Shift
+ bindsym $mod+Shift+$left move left
+ bindsym $mod+Shift+$down move down
+ bindsym $mod+Shift+$up move up
+ bindsym $mod+Shift+$right move right
+ # ditto, with arrow keys
+ bindsym $mod+Shift+Left move left
+ bindsym $mod+Shift+Down move down
+ bindsym $mod+Shift+Up move up
+ bindsym $mod+Shift+Right move right
+#
+# Workspaces:
+#
+ # switch to workspace
+ bindsym $mod+1 workspace 1
+ bindsym $mod+2 workspace 2
+ bindsym $mod+3 workspace 3
+ bindsym $mod+4 workspace 4
+ bindsym $mod+5 workspace 5
+ bindsym $mod+6 workspace 6
+ bindsym $mod+7 workspace 7
+ bindsym $mod+8 workspace 8
+ bindsym $mod+9 workspace 9
+ bindsym $mod+0 workspace 10
+ # move focused container to workspace
+ bindsym $mod+Shift+1 move container to workspace 1
+ bindsym $mod+Shift+2 move container to workspace 2
+ bindsym $mod+Shift+3 move container to workspace 3
+ bindsym $mod+Shift+4 move container to workspace 4
+ bindsym $mod+Shift+5 move container to workspace 5
+ bindsym $mod+Shift+6 move container to workspace 6
+ bindsym $mod+Shift+7 move container to workspace 7
+ bindsym $mod+Shift+8 move container to workspace 8
+ bindsym $mod+Shift+9 move container to workspace 9
+ bindsym $mod+Shift+0 move container to workspace 10
+ # Note: workspaces can have any name you want, not just numbers.
+ # We just use 1-10 as the default.
+#
+# Layout stuff:
+#
+ # You can "split" the current object of your focus with
+ # $mod+b or $mod+v, for horizontal and vertical splits
+ # respectively.
+ bindsym $mod+b splith
+ bindsym $mod+v splitv
+
+ # Switch the current container between different layout styles
+ bindsym $mod+s layout stacking
+ bindsym $mod+w layout tabbed
+ bindsym $mod+e layout toggle split
+
+ # Make the current focus fullscreen
+ bindsym $mod+f fullscreen
+
+ # Toggle sticky-ness of the current (floating) window
+ bindsym $mod+$mod2+space sticky toggle
+
+ # Toggle the current focus between tiling and floating mode
+ bindsym $mod+Shift+space floating toggle
+
+ # Swap focus between the tiling area and the floating area
+ bindsym $mod+space focus mode_toggle
+
+ # move focus to the parent container
+ bindsym $mod+a focus parent
+#
+# Scratchpad:
+#
+ # Sway has a "scratchpad", which is a bag of holding for windows.
+ # You can send windows there and get them back later.
+
+ # Move the currently focused window to the scratchpad
+ bindsym $mod+Shift+minus move scratchpad
+
+ # Show the next scratchpad window or hide the focused scratchpad window.
+ # If there are multiple scratchpad windows, this command cycles through them.
+ bindsym $mod+minus scratchpad show
+#
+# Resizing containers:
+#
+mode "resize" {
+ # left will shrink the containers width
+ # right will grow the containers width
+ # up will shrink the containers height
+ # down will grow the containers height
+ bindsym $left resize shrink width 10px
+ bindsym $down resize grow height 10px
+ bindsym $up resize shrink height 10px
+ bindsym $right resize grow width 10px
+
+ # ditto, with arrow keys
+ bindsym Left resize shrink width 10px
+ bindsym Down resize grow height 10px
+ bindsym Up resize shrink height 10px
+ bindsym Right resize grow width 10px
+
+ # return to default mode
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+}
+bindsym $mod+Shift+r mode "resize"
+
+#
+# Power button
+#
+
+set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
+mode "$mode_system" {
+ bindsym l exec swaylock, mode "default"
+ bindsym e exec swaymsg exit, mode "default"
+ bindsym s exec systemctl suspend, mode "default"
+ bindsym h exec systemctl hibernate, mode "default"
+ bindsym r exec systemctl reboot, mode "default"
+ bindsym Shift+s exec systemctl poweroff -i, mode "default"
+
+ # back to normal: Enter, Escape, or q
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+ bindsym q mode "default"
+}
+# bindsym XF86PowerOff mode "$mode_system"
+bindsym $mod+Shift+e mode "$mode_system"
+
+#
+# Presentation mode
+#
+
+bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
+
+#
+# Notifications
+#
+
+bindsym $mod+Shift+n mode notifications
+mode notifications {
+ bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
+ bindsym d exec makoctl dismiss; mode default
+ bindsym Shift+d exec makoctl dismiss -a; mode default
+
+ bindsym Escape mode default
+ bindsym q mode default
+}
+
+#
+# Screenshotting
+#
+
+bindsym $mod+Shift+s mode screenshot
+mode screenshot {
+ bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
+ bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
+
+ bindsym Escape mode default
+ bindsym q mode default
+}
+
+#
+# Window configurations
+#
+for_window [class="mpv"] floating enable
+for_window [class="TelegramDesktop"] floating enable
+for_window [app_id="pavucontrol"] floating enable
+for_window [app_id="meld"] floating enable
+for_window [app_id="nm-connection-editor"] floating enable
+
+#
+# Status Bar:
+#
+# Read `man 5 sway-bar` for more information about this section.
+bar {
+ position bottom
+ colors {
+ statusline #ffffff
+ background #212121
+ inactive_workspace #21212100 #21212100 #5c5c5c
+ }
+ status_command i3status | my-i3status.py
+}
+
+# font pango: benis uushi 9
+# font pango: Ubuntu Mono 11
+# font pango: Inconsolata 11
+font pango: DejaVu Sans Mono 9
+# font pango: Liberation Mono 9
+
+exec xrdb .Xresources
+# exec pgrep -x "systemd-inhibit" || \
+# systemd-inhibit --what=handle-power-key --who=aminb \
+# --why="Handle power button in sway" sleep infinity
+exec mako 2>&1 >/tmp/mako.log
+exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
+
+include /etc/sway/config.d/*
+include ~/.config/sway/`hostname`
+
+exec systemd-notify --ready || true
+
+#+end_src
+
+*** langa
+:PROPERTIES:
+:header-args+: :tangle ~/.config/sway/langa
+:END:
+
+#+begin_src conf
+input "2:7:SynPS/2_Synaptics_TouchPad" {
+ events disabled
+ dwt enabled
+ tap enabled
+ natural_scroll enabled
+ click_method clickfinger
+}
+
+input "1:1:AT_Translated_Set_2_keyboard" {
+ repeat_delay 200
+ repeat_rate 45
+ xkb_layout us_ab,ir
+ xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
+}
+#+end_src
+
+*** shemshak
+:PROPERTIES:
+:header-args+: :tangle ~/.config/sway/shemshak
+:END:
+
+#+begin_src conf
+input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
+ dwt enabled
+ tap enabled
+ natural_scroll enabled
+ middle_emulation enabled
+ click_method clickfinger
+}
+
+input "1:1:AT_Translated_Set_2_keyboard" {
+ repeat_delay 200
+ repeat_rate 45
+ xkb_layout us,ir
+ xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
+}
+#+end_src
+** swaylock
+:PROPERTIES:
+:header-args+: :tangle ~/.config/swaylock/config
+:END:
+
+#+begin_src conf
+image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
+scaling=fill
+#+end_src
+** systemd
+
+Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
+
+#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf
+[Service]
+TTYVTDisallocate=no
+#+end_src
+
+** TLP
+
+*** langa
+
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power saving
+# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
+
+# Hint: some features are disabled by default, remove the leading # to enable
+# them.
+
+# Set to 0 to disable, 1 to enable TLP.
+TLP_ENABLE=1
+
+# Operation mode when no power supply can be detected: AC, BAT.
+# Concerns some desktop and embedded hardware only.
+TLP_DEFAULT_MODE=AC
+
+# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
+# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
+TLP_PERSISTENT_DEFAULT=0
+
+# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Hint: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel default values are used.
+
+# Select a CPU frequency scaling governor.
+# Intel Core i processor with intel_pstate driver:
+# powersave(*), performance.
+# Older hardware with acpi-cpufreq driver:
+# ondemand(*), powersave, performance, conservative, schedutil.
+# (*) is recommended.
+# Hint: use tlp-stat -p to show the active driver and available governors.
+# Important:
+# powersave for intel_pstate and ondemand for acpi-cpufreq are power
+# efficient for *almost all* workloads and therefore kernel and most
+# distributions have chosen them as defaults. If you still want to change,
+# you should know what you're doing! You *must* disable your distribution's
+# governor settings or conflicts will occur.
+#CPU_SCALING_GOVERNOR_ON_AC=powersave
+#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your CPU. For available frequencies see
+# the output of tlp-stat -p.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set energy performance hints (HWP) for Intel P-state governor:
+# performance, balance_performance, default, balance_power, power
+# Values are given in order of increasing power saving.
+# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
+CPU_HWP_ON_AC=balance_performance
+CPU_HWP_ON_BAT=balance_power
+
+# Set Intel P-state performance: 0..100 (%).
+# Limit the max/min P-state to control the power dissipation of the CPU.
+# Values are stated as a percentage of the available performance.
+# Requires an Intel Core i processor with intel_pstate driver.
+#CPU_MIN_PERF_ON_AC=0
+#CPU_MAX_PERF_ON_AC=100
+#CPU_MIN_PERF_ON_BAT=0
+#CPU_MAX_PERF_ON_BAT=30
+
+# Set the CPU "turbo boost" feature: 0=disable, 1=allow
+# Requires an Intel Core i processor.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used CPU cores/hyper-threads under light load conditions:
+# 0=disable, 1=enable.
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog:
+# 0=disable (default, saves power), 1=enable (for kernel debugging only).
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
+# Frequency voltage pairs are written to:
+# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Set CPU performance versus energy savings policy:
+# performance, balance-performance, default, balance-power, power.
+# Values are given in order of increasing power saving.
+# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
+ENERGY_PERF_POLICY_ON_AC=performance
+ENERGY_PERF_POLICY_ON_BAT=balance-power
+
+# Disk devices; separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk ID also (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Disk advanced power management level: 1..254, 255 (max saving, min, off).
+# Levels 1..127 may spin down the disk; 255 allowable on most drives.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="128 128"
+
+# Hard disk spin down timeout:
+# 0: spin down disabled
+# 1..240: timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# See 'man hdparm' for details.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the kernel default scheduler for the particular disk.
+#DISK_IOSCHED="cfq cfq"
+
+# AHCI link power management (ALPM) for disk devices:
+# min_power, med_power_with_dipm(*), medium_power, max_performance.
+# (*) Kernel >= 4.15 required, then recommended.
+# Multiple values separated with spaces are tried sequentially until success.
+SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
+SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
+
+# Exclude host devices from AHCI link power management.
+# Separate multiple hosts with spaces.
+#SATA_LINKPWR_BLACKLIST="host1"
+
+# Runtime Power Management for AHCI host and disks devices:
+# on=disable, auto=enable.
+# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+#AHCI_RUNTIME_PM_ON_AC=on
+#AHCI_RUNTIME_PM_ON_BAT=on
+
+# Seconds of inactivity before disk is suspended.
+AHCI_RUNTIME_PM_TIMEOUT=15
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default, performance, powersave.
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
+# auto = mid on BAT, high on AC; default = use hardware defaults.
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# Radeon dynamic power management method (DPM): battery, performance.
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# Radeon DPM performance level: auto, low, high; auto is recommended.
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
+WIFI_PWR_ON_AC=off
+WIFI_PWR_ON_BAT=on
+
+# Disable wake on LAN: Y/N.
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables, >=1 enables power saving (recommended: 1).
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=0
+
+# Disable controller too (HDA only): Y/N.
+SOUND_POWER_SAVE_CONTROLLER=N
+
+# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
+# Drive can be powered on again by releasing (and reinserting) the eject lever
+# or by pressing the disc eject button on newer models.
+# Note: an UltraBay/MediaBay hard disk is never powered off.
+BAY_POWEROFF_ON_AC=0
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0).
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Exclude PCI(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+
+# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
+# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
+# prevents accidential power-on of dGPU in hybrid graphics setups.
+# Use "" to disable the feature completely.
+# Separate multiple drivers with spaces.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
+
+# Set to 0 to disable, 1 to enable USB autosuspend feature.
+USB_AUTOSUSPEND=1
+
+# Exclude listed devices from USB autosuspend (separate with spaces).
+# Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# Bluetooth devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_BTUSB=0
+
+# Phone devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude (enable charging).
+USB_BLACKLIST_PHONE=0
+
+# Printers are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_PRINTER=1
+
+# WWAN devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_WWAN=1
- # exit sway (logs you out of your wayland session)
- bindsym $mod+Shift+e exit
+# Include listed devices into USB autosuspend even if already excluded
+# by the blacklists above (separate with spaces).
+# Use lsusb to get the ids.
+#USB_WHITELIST="1111:2222 3333:4444"
- bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
- bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
- bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
+# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
+# (workaround for USB devices that cause shutdown problems).
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
- bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
- bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
- bindsym XF86AudioMute exec pamixer --toggle-mute
- bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
+# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
+# on system startup: 0=disable, 1=enable.
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+# are ignored when this is enabled!
+#RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=1
- # original sway workspace switch and window move
- bindsym $mod+bracketleft workspace prev
- bindsym $mod+bracketright workspace next
- bindsym $mod+braceleft move container to workspace prev
- bindsym $mod+braceright move container to workspace next
+# Radio devices to disable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
- # bspwm-esque workspace switch and window move
- bindsym $mod2+bracketleft exec sway-ws-util switch prev
- bindsym $mod2+bracketright exec sway-ws-util switch next
- bindsym $mod2+braceleft exec sway-ws-util move prev follow
- bindsym $mod2+braceright exec sway-ws-util move next follow
-#
-# Moving around:
-#
- # Move your focus around
- bindsym $mod+$left focus left
- bindsym $mod+$down focus down
- bindsym $mod+$up focus up
- bindsym $mod+$right focus right
- # or use $mod+[up|down|left|right]
- bindsym $mod+Left focus left
- bindsym $mod+Down focus down
- bindsym $mod+Up focus up
- bindsym $mod+Right focus right
+# Radio devices to enable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
- # _move_ the focused window with the same, but add Shift
- bindsym $mod+Shift+$left move left
- bindsym $mod+Shift+$down move down
- bindsym $mod+Shift+$up move up
- bindsym $mod+Shift+$right move right
- # ditto, with arrow keys
- bindsym $mod+Shift+Left move left
- bindsym $mod+Shift+Down move down
- bindsym $mod+Shift+Up move up
- bindsym $mod+Shift+Right move right
-#
-# Workspaces:
-#
- # switch to workspace
- bindsym $mod+1 workspace 1
- bindsym $mod+2 workspace 2
- bindsym $mod+3 workspace 3
- bindsym $mod+4 workspace 4
- bindsym $mod+5 workspace 5
- bindsym $mod+6 workspace 6
- bindsym $mod+7 workspace 7
- bindsym $mod+8 workspace 8
- bindsym $mod+9 workspace 9
- bindsym $mod+0 workspace 10
- # move focused container to workspace
- bindsym $mod+Shift+1 move container to workspace 1
- bindsym $mod+Shift+2 move container to workspace 2
- bindsym $mod+Shift+3 move container to workspace 3
- bindsym $mod+Shift+4 move container to workspace 4
- bindsym $mod+Shift+5 move container to workspace 5
- bindsym $mod+Shift+6 move container to workspace 6
- bindsym $mod+Shift+7 move container to workspace 7
- bindsym $mod+Shift+8 move container to workspace 8
- bindsym $mod+Shift+9 move container to workspace 9
- bindsym $mod+Shift+0 move container to workspace 10
- # Note: workspaces can have any name you want, not just numbers.
- # We just use 1-10 as the default.
-#
-# Layout stuff:
-#
- # You can "split" the current object of your focus with
- # $mod+b or $mod+v, for horizontal and vertical splits
- # respectively.
- bindsym $mod+b splith
- bindsym $mod+v splitv
+# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
+# (workaround for devices that are blocking shutdown).
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
- # Switch the current container between different layout styles
- bindsym $mod+s layout stacking
- bindsym $mod+w layout tabbed
- bindsym $mod+e layout toggle split
+# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
+# (to prevent other operating systems from missing radios).
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
- # Make the current focus fullscreen
- bindsym $mod+f fullscreen
+# Radio devices to enable on AC: bluetooth, wifi, wwan.
+#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
- # Toggle the current focus between tiling and floating mode
- bindsym $mod+Shift+space floating toggle
+# Radio devices to disable on battery: bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
+DEVICES_TO_DISABLE_ON_BAT="bluetooth"
- # Swap focus between the tiling area and the floating area
- bindsym $mod+space focus mode_toggle
+# Radio devices to disable on battery when not in use (not connected):
+# bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
- # move focus to the parent container
- bindsym $mod+a focus parent
-#
-# Scratchpad:
-#
- # Sway has a "scratchpad", which is a bag of holding for windows.
- # You can send windows there and get them back later.
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
+# required). Charging starts when the remaining capacity falls below the
+# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
+# Main / Internal battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay / Slice / Replaceable battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
- # Move the currently focused window to the scratchpad
- bindsym $mod+Shift+minus move scratchpad
+# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
+#RESTORE_THRESHOLDS_ON_BAT=1
- # Show the next scratchpad window or hide the focused scratchpad window.
- # If there are multiple scratchpad windows, this command cycles through them.
- bindsym $mod+minus scratchpad show
-#
-# Resizing containers:
-#
-mode "resize" {
- # left will shrink the containers width
- # right will grow the containers width
- # up will shrink the containers height
- # down will grow the containers height
- bindsym $left resize shrink width 10px
- bindsym $down resize grow height 10px
- bindsym $up resize shrink height 10px
- bindsym $right resize grow width 10px
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth, wifi, wwan.
- # ditto, with arrow keys
- bindsym Left resize shrink width 10px
- bindsym Down resize grow height 10px
- bindsym Up resize shrink height 10px
- bindsym Right resize grow width 10px
+# Hints:
+# - Parameters are disabled by default, remove the leading # to enable them
+# - Separate multiple radio devices with spaces
- # return to default mode
- bindsym Return mode "default"
- bindsym Escape mode "default"
-}
-bindsym $mod+Shift+r mode "resize"
+# Radio devices to disable on connect.
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
-#
-# Status Bar:
-#
-# Read `man 5 sway-bar` for more information about this section.
-bar {
- position bottom
- colors {
- statusline #ffffff
- background #323232
- inactive_workspace #32323200 #32323200 #5c5c5c
- }
- status_command i3gs ~/.config/i3gs/config
-}
+# Radio devices to enable on disconnect.
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
-include /etc/sway/config.d/*
-#+end_src
+# Radio devices to enable/disable when docked.
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
-** TLP
+# Radio devices to enable/disable when undocked.
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+#+end_src
-*** TODO enigma
-*** plasma
+*** shemshak
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
# ------------------------------------------------------------------------------
# tlp - Parameters for power saving
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
! Emacs.font: Inconsolata:size=16
! Emacs.font: Inconsolata LGC:size=14
! Emacs.font: Source Code Pro Medium-10.5
-Emacs.font: Ubuntu Mono:size=16
+Emacs.font: Source Code Pro:size=14
+! Emacs.font: Ubuntu Mono:size=16
! Emacs.font: Iosevka:size=16
#+end_src
#+begin_src conf-xdefaults
! Font
-URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
-URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
-URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
-URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
+URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
+URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
+URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
+URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
URxvt.xftAntialias: true
URxvt.letterSpace: 0
URxvt.keysym.Shift-Down: command:\033]721;1\007
URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
-URxvt.perl-ext: bidi
-URxvt.bidi.enabled: 1
URxvt.url-select.launcher: firefox
URxvt.url-select.underline: true
URxvt.keysym.M-u: perl:url-select:select_next
!URxvt.color6: #06989A
!URxvt.color14: #34E2E2
! orange (replaces cyan)
-*color6: #ce5c00
-*color14: #fcaf3e
+,*color6: #ce5c00
+,*color14: #fcaf3e
! White
URxvt.color7: #D3D7CF
URxvt.color15: #EEEEEC
#+end_src
+*** xkb us_ab keyboard layout
+
+#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
+default partial alphanumeric_keys
+xkb_symbols "us_ab" {
+ include "us(basic)"
+ name[Group1]= "English (US)(aminb)";
+
+ key <MENU> { [ Alt_R ] };
+};
+#+end_src
+
** XDG
:PROPERTIES:
:header-args+: :tangle ~/.config/user-dirs.dirs
:END:
#+begin_src sh
-
-
#################
# CORE SETTINGS #
#################
#zhighlighters=(main brackets cursor)
zhighlighters=(main brackets pattern)
-
#
# SSH
#
# Load these ssh identities with the ssh module
-zssh_ids=(id_ed25519_mab)
-
+zssh_ids=(id_ed25519_bandali)
#
# Pacman
# Load any helper scripts as defined here
#zpacman_helper=(aur)
+
+
#+end_src
*** zlogin
:END:
#+begin_src sh
-
-
#
# User configuration sourced by login shells
#
# Initialize zim
[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
+
#+end_src
*** zprofile
#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
+export NIXPKGS=$HOME/src/git/nixpkgs
+
if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
+
+export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
+export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH"
+export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
+export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
+export GIT_SSL_CAINFO="$SSL_CERT_FILE"
#+end_src
*** zshenv
# User configuration sourced by interactive shells
#
-# Change default zim location
+# Define zim location
export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
# Start zim
setopt globdots
source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
-source ~/.zsh/zsh-autopair/autopair.zsh
+# source ~/.zsh/zsh-autopair/autopair.zsh
### fzf ###
alias cp="cp -iv"
alias scl=systemctl
alias jcl=journalctl
-alias m="mbsync -Va; getmail; notmuch new"
+alias m="mbsync csclub; mbsync uwaterloo; mbsync amin"
alias best="youtube-dl -f best"
-alias nixx="ssh amin@nix.aminb.org"
-alias fence="ssh aminb@fencepost.gnu.org"
+alias sd="ssh deb"
+alias sf="ssh fp"
+alias sn="ssh nix"
aur() {
cd ~/usr/build
# i-beam cursor
echo -e "\033[5 q"
#echo -e "\033[6 q"
+
#+end_src
* Scripts
:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
:END:
-#+begin_src sh
+#+begin_src sh :tangle no
dbus_send() {
label=$1
dbus-send --print-reply=literal --system \
printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
#+end_src
+** my-i3status.py
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
+:END:
+
+#+begin_src python :comments none
+# -*- coding: utf-8 -*-
+
+# This script is a simple wrapper which prefixes each i3status line with custom
+# information. It is based on:
+# https://github.com/i3/i3status/blob/master/contrib/wrapper.py
+#
+# In ~/.i3status.conf, add the following line:
+# output_format = "i3bar"
+# in the 'general' section.
+# Then, in ~/.config/i3/config or ~/.config/sway/config add:
+# status_command i3status | my-i3status.py
+# in the 'bar' section. Make sure my-i3status.py is in $PATH.
+#
+# © 2012 Valentin Haenel <valentin.haenel@gmx.de>
+# © 2018 Amin Bandali <bandali@gnu.org>
+#
+# This program is free software. It comes without any warranty, to the extent
+# permitted by applicable law. You can redistribute it and/or modify it under
+# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
+# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
+# details.
+
+import sys
+import json
+import os
+
+def get_nosleep():
+ """ Return true if ~/.nosleep exists. """
+ return os.path.isfile(os.path.expanduser("~/.nosleep"))
+
+def print_line(message):
+ """ Non-buffered printing to stdout. """
+ sys.stdout.write(message + '\n')
+ sys.stdout.flush()
+
+def read_line():
+ """ Interrupted respecting reader for stdin. """
+ # try reading a line, removing any extra whitespace
+ try:
+ line = sys.stdin.readline().strip()
+ # i3status sends EOF, or an empty line
+ if not line:
+ sys.exit(3)
+ return line
+ # exit on ctrl-c
+ except KeyboardInterrupt:
+ sys.exit()
+
+if __name__ == '__main__':
+ # Skip the first line which contains the version header.
+ print_line(read_line())
+
+ # The second line contains the start of the infinite array.
+ print_line(read_line())
+
+ while True:
+ line, prefix = read_line(), ''
+ # ignore comma at start of lines
+ if line.startswith(','):
+ line, prefix = line[1:], ','
+
+ if get_nosleep():
+ j = json.loads(line)
+ # insert information into the start of the json, but could be anywhere
+ j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
+ # and echo back new encoded json
+ print_line(prefix+json.dumps(j))
+ else:
+ print_line(prefix+line)
+#+end_src
+
** rofi-light
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
#+begin_src bash
cur=$(light -G)
val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
-light -S $val
+[ -n "$val" ] && light -S $val
+#+end_src
+
+** rofi-remmina.py
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
+:END:
+
+#+begin_src python
+import ConfigParser
+import os
+from subprocess import Popen, PIPE
+
+remmina_dir = os.path.expanduser("~/.local/share/remmina")
+
+fdict = dict()
+
+for f in os.listdir(remmina_dir):
+ fp = os.path.join(remmina_dir, f)
+ c = ConfigParser.ConfigParser()
+ c.read(fp)
+ n = c.get('remmina', 'name')
+ fdict[n] = fp
+
+lines = max(min(15, len(fdict)), 1);
+width = len(max(fdict.keys(), key=len))
+rofi = Popen(["rofi", "-i", "-dmenu", \
+ "-l", str(lines), "-width", str(width), \
+ "-p", "connection"], stdout=PIPE, stdin=PIPE)
+selected = rofi.communicate("\n" \
+ .join(fdict.keys()) \
+ .encode("utf-8"))[0] \
+ .decode("utf-8") \
+ .strip()
+rofi.wait()
+
+r = Popen(["remmina", "-c", fdict[selected]])
+r.wait()
#+end_src
** s (run sway)
#+begin_src bash
export _JAVA_AWT_WM_NONREPARENTING=1
export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
-light -Scrs "intel_backlight" 2
+light -Nr 2
source $HOME/.zprofile
sway
#+end_src
:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
:END:
-#+begin_src bash
+#+begin_src bash :tangle no
lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
if [ "$lang" = "us" ]; then
:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
:END:
-#+begin_src bash
+#+begin_src bash :tangle no
xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
#+end_src
- properly rotates the stylus pen and touch screen pointers, and
- toggles between RGB and Vertical BGR sub-pixel order.
-#+begin_src bash
+#+begin_src bash :tangle no
case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
0) # Screen is not rotated, we should rotate it right (90°)
xrandr -o 3
:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
:END:
-#+begin_src python
+#+begin_src python :tangle no
import gnomekeyring as gk
# list_item_ids_sync('login')[0] == 1L
gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
:END:
-#+begin_src sh
+#+begin_src sh :tangle no
cur_vol=$(pamixer --get-volume)
if [ $(pamixer --get-mute) = true ]; then
projects / ~bandali / configs / blobdiff