+** pigeonhole
+*** gnu.sieve
+:PROPERTIES:
+:header-args+: :tangle ~/sieve/gnu.sieve :comments none
+:END:
+
+#+begin_src conf
+require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
+
+if anyof (
+ address :is "from" "webmasters@gnu.org",
+ address :is "from" "webmasters-comment@gnu.org") {
+ fileinto :create "webmasters";
+ stop;
+}
+
+include :personal "lists";
+#+end_src
+
+*** lists.sieve
+:PROPERTIES:
+:header-args+: :tangle ~/sieve/lists.sieve :comments none
+:END:
+
+#+begin_src conf
+require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
+ "include" ];
+
+if anyof (
+ header :contains "list-id" "<emacs-devel.gnu.org>",
+ header :contains "list-id" "<emacs-orgmode.gnu.org>",
+ header :contains "list-id" "<emacsconf-discuss.gnu.org>",
+ header :contains "list-id" "<fencepost-users.gnu.org>",
+ header :contains "list-id" "<guix-devel.gnu.org>",
+ header :contains "list-id" "<guile-devel.gnu.org>",
+ header :contains "list-id" "<help-gnu-emacs.gnu.org>",
+ header :contains "list-id" "<info-gnu-emacs.gnu.org>",
+ header :contains "list-id" "<www-commits.gnu.org>",
+ header :contains "list-id" "<www-discuss.gnu.org>",
+ header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
+ header :contains "list-id" "<haskell-cafe.haskell.org>",
+ header :contains "list-id" "<haskell-art.we.lurk.org>",
+ header :contains "list-id" "<notmuch.notmuchmail.org>") {
+ if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
+ set :lower "listname" "${1}";
+ fileinto :create "l/${listname}";
+ }
+}
+#+end_src
+
+** polybar
+
+*** config
+:PROPERTIES:
+:header-args+: :tangle ~/.config/polybar/config
+:END:
+
+#+begin_src conf :tangle no
+;=====================================================
+;
+; To learn more about how to configure Polybar
+; go to https://github.com/jaagr/polybar
+;
+; The README contains alot of information
+;
+;=====================================================
+
+[colors]
+;background = ${xrdb:color0:#222}
+background = #222
+background-alt = #444
+;foreground = ${xrdb:color7:#222}
+foreground = #eee
+foreground-alt = #888
+primary = #ffb52a
+secondary = #e60053
+alert = #bd2c40
+
+[bar/main]
+;monitor = ${env:MONITOR:HDMI-1}
+width = 100%
+height = 27
+;offset-x = 1%
+;offset-y = 1%
+radius = 3.0
+fixed-center = true
+
+background = ${colors.background}
+foreground = ${colors.foreground}
+
+line-size = 3
+line-color = #f00
+
+border-size = 4
+border-color = #00000000
+
+padding-left = 0
+padding-right = 2
+
+module-margin-left = 2
+module-margin-right = 2
+
+font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
+font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
+font-2 = Wuncon Siji:pixelsize=10;1
+font-3 = FontAwesome:pixelsize=10;1
+
+modules-left = bspwm xwindow
+modules-center =
+modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
+
+tray-position = right
+tray-padding = 1
+;tray-transparent = true
+;tray-background = #0063ff
+tray-maxsize = 18
+
+wm-restack = bspwm
+
+;override-redirect = true
+
+scroll-up = bspwm-desknext
+scroll-down = bspwm-deskprev
+
+[module/xwindow]
+type = internal/xwindow
+label = %title:0:50:...%
+
+[module/xkeyboard]
+type = internal/xkeyboard
+blacklist-0 = num lock
+
+format-prefix = " "
+format-prefix-foreground = ${colors.foreground-alt}
+format-prefix-underline = ${colors.secondary}
+
+label-layout = %layout%
+label-layout-underline = ${colors.secondary}
+
+label-indicator-padding = 2
+label-indicator-margin = 1
+label-indicator-background = ${colors.secondary}
+label-indicator-underline = ${colors.secondary}
+
+[module/filesystem]
+type = internal/fs
+interval = 25
+
+mount-0 = /
+
+label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
+label-unmounted = %mountpoint% not mounted
+label-unmounted-foreground = ${colors.foreground-alt}
+
+[module/bspwm]
+type = internal/bspwm
+
+label-focused = %index%
+label-focused-background = ${colors.background-alt}
+label-focused-underline= ${colors.primary}
+label-focused-padding = 2
+
+label-occupied = %index%
+label-occupied-padding = 2
+
+label-urgent = %index%!
+label-urgent-background = ${colors.alert}
+label-urgent-padding = 2
+
+label-empty = %index%
+label-empty-foreground = ${colors.foreground-alt}
+label-empty-padding = 2
+
+[module/i3]
+type = internal/i3
+format = <label-state> <label-mode>
+index-sort = true
+wrapping-scroll = false
+
+; Only show workspaces on the same output as the bar
+;pin-workspaces = true
+
+label-mode-padding = 2
+label-mode-foreground = #000
+label-mode-background = ${colors.primary}
+
+; focused = Active workspace on focused monitor
+label-focused = %index%
+label-focused-background = ${module/bspwm.label-focused-background}
+label-focused-underline = ${module/bspwm.label-focused-underline}
+label-focused-padding = ${module/bspwm.label-focused-padding}
+
+; unfocused = Inactive workspace on any monitor
+label-unfocused = %index%
+label-unfocused-padding = ${module/bspwm.label-occupied-padding}
+
+; visible = Active workspace on unfocused monitor
+label-visible = %index%
+label-visible-background = ${self.label-focused-background}
+label-visible-underline = ${self.label-focused-underline}
+label-visible-padding = ${self.label-focused-padding}
+
+; urgent = Workspace with urgency hint set
+label-urgent = %index%
+label-urgent-background = ${module/bspwm.label-urgent-background}
+label-urgent-padding = ${module/bspwm.label-urgent-padding}
+
+[module/mpd]
+type = internal/mpd
+format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
+
+icon-prev =
+icon-stop =
+icon-play =
+icon-pause =
+icon-next =
+
+label-song-maxlen = 25
+label-song-ellipsis = true
+
+[module/xbacklight]
+type = internal/xbacklight
+
+format = <label> <bar>
+label = BL
+
+bar-width = 10
+bar-indicator = |
+bar-indicator-foreground = #ff
+bar-indicator-font = 2
+bar-fill = ─
+bar-fill-font = 2
+bar-fill-foreground = #9f78e1
+bar-empty = ─
+bar-empty-font = 2
+bar-empty-foreground = ${colors.foreground-alt}
+
+[module/backlight-acpi]
+inherit = module/xbacklight
+type = internal/backlight
+;card = intel_backlight
+card = mba6x_backlight
+
+[module/cpu]
+type = internal/cpu
+interval = 2
+format-prefix = " "
+format-prefix-foreground = ${colors.foreground-alt}
+format-underline = #f90000
+label = %percentage%%
+
+[module/memory]
+type = internal/memory
+interval = 2
+format-prefix = " "
+format-prefix-foreground = ${colors.foreground-alt}
+format-underline = #4bffdc
+label = %percentage_used%%
+
+[module/wlan]
+type = internal/network
+interface =
+interval = 3.0
+
+format-connected = <ramp-signal> <label-connected>
+format-connected-underline = #9f78e1
+label-connected = %essid%
+
+format-disconnected =
+;format-disconnected = <label-disconnected>
+;format-disconnected-underline = ${self.format-connected-underline}
+;label-disconnected = %ifname% disconnected
+;label-disconnected-foreground = ${colors.foreground-alt}
+
+ramp-signal-0 =
+ramp-signal-1 =
+ramp-signal-2 =
+ramp-signal-3 =
+ramp-signal-4 =
+ramp-signal-foreground = ${colors.foreground-alt}
+
+[module/eth]
+type = internal/network
+interface =
+interval = 3.0
+
+format-connected-underline = #55aa55
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.foreground-alt}
+label-connected = %local_ip%
+
+format-disconnected =
+;format-disconnected = <label-disconnected>
+;format-disconnected-underline = ${self.format-connected-underline}
+;label-disconnected = %ifname% disconnected
+;label-disconnected-foreground = ${colors.foreground-alt}
+
+[module/date]
+type = internal/date
+interval = 5
+
+date =
+date-alt = " %Y-%m-%d"
+
+time = %H:%M
+time-alt = %H:%M:%S
+
+format-prefix =
+format-prefix-foreground = ${colors.foreground-alt}
+format-underline = #0a6cf5
+
+label = %date% %time%
+
+[module/volume]
+type = internal/volume
+
+format-volume = <label-volume> <bar-volume>
+label-volume = vol
+label-volume-foreground = ${root.foreground}
+
+format-muted-prefix = " "
+format-muted-foreground = ${colors.foreground-alt}
+label-muted = mute
+
+bar-volume-width = 10
+bar-volume-foreground-0 = #55aa55
+bar-volume-foreground-1 = #55aa55
+bar-volume-foreground-2 = #55aa55
+bar-volume-foreground-3 = #55aa55
+bar-volume-foreground-4 = #55aa55
+bar-volume-foreground-5 = #f5a70a
+bar-volume-foreground-6 = #ff5555
+bar-volume-gradient = false
+bar-volume-indicator = |
+bar-volume-indicator-font = 2
+bar-volume-fill = ─
+bar-volume-fill-font = 2
+bar-volume-empty = ─
+bar-volume-empty-font = 2
+bar-volume-empty-foreground = ${colors.foreground-alt}
+
+[module/battery]
+type = internal/battery
+battery = BAT0
+adapter = ADP1
+full-at = 64
+
+format-charging = <animation-charging> <label-charging>
+format-charging-underline = #ffb52a
+
+format-discharging = <ramp-capacity> <label-discharging>
+format-discharging-underline = ${self.format-charging-underline}
+
+format-full-prefix = " "
+format-full-prefix-foreground = ${colors.foreground-alt}
+format-full-underline = ${self.format-charging-underline}
+
+ramp-capacity-0 =
+ramp-capacity-1 =
+ramp-capacity-2 =
+ramp-capacity-foreground = ${colors.foreground-alt}
+
+animation-charging-0 =
+animation-charging-1 =
+animation-charging-2 =
+animation-charging-foreground = ${colors.foreground-alt}
+animation-charging-framerate = 750
+
+[module/temperature]
+type = internal/temperature
+thermal-zone = 1
+warn-temperature = 66
+
+format = <ramp> <label>
+format-underline = #f50a4d
+format-warn = <ramp> <label-warn>
+format-warn-underline = ${self.format-underline}
+
+label = %temperature%
+label-warn = %temperature%
+label-warn-foreground = ${colors.secondary}
+
+ramp-0 =
+ramp-1 =
+ramp-2 =
+ramp-foreground = ${colors.foreground-alt}
+
+[module/powermenu]
+type = custom/menu
+
+format-spacing = 1
+
+label-open =
+label-open-foreground = ${colors.secondary}
+label-close = cancel
+label-close-foreground = ${colors.secondary}
+label-separator = |
+label-separator-foreground = ${colors.foreground-alt}
+
+menu-0-0 = reboot
+menu-0-0-exec = menu-open-1
+menu-0-1 = power off
+menu-0-1-exec = menu-open-2
+
+menu-1-0 = cancel
+menu-1-0-exec = menu-open-0
+menu-1-1 = reboot
+menu-1-1-exec = sudo reboot
+
+menu-2-0 = power off
+menu-2-0-exec = sudo poweroff
+menu-2-1 = cancel
+menu-2-1-exec = menu-open-0
+
+[module/mail]
+type = custom/script
+interval = 60
+format = <label>
+format-prefix = " "
+format-prefix-foreground = ${colors.foreground-alt}
+format-underline = #0a6cf5
+exec = notmuch count tag:unread
+
+[settings]
+screenchange-reload = true
+;compositing-background = xor
+;compositing-background = screen
+;compositing-foreground = source
+;compositing-border = over
+
+[global/wm]
+margin-top = 0
+margin-bottom = 0
+
+; vim:ft=dosini
+#+end_src
+
+*** polybar-launch
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
+:END:
+
+#+begin_src sh :tangle no
+# Terminate already running bar instances
+killall -q polybar
+
+# Wait until the processes have been shut down
+while pgrep -x polybar >/dev/null; do sleep 1; done
+
+# Launch main bar
+polybar main &
+
+echo "Bars launched..."
+#+end_src
+
+** PowerTOP
+:PROPERTIES:
+:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
+:END:
+
+#+begin_src conf
+[Unit]
+Description=Powertop tunings
+
+[Service]
+ExecStart=/usr/bin/powertop --auto-tune
+RemainAfterExit=true
+
+[Install]
+WantedBy=multi-user.target
+#+end_src
+
+** ranger
+
+*** rc.conf
+:PROPERTIES:
+:header-args+: :tangle ~/.config/ranger/rc.conf
+:END:
+
+#+begin_src conf :tangle no
+# ===================================================================
+# This file contains the default startup commands for ranger.
+# To change them, it is recommended to create the file
+# ~/.config/ranger/rc.conf and add your custom commands there.
+#
+# If you copy this whole file there, you may want to set the environment
+# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
+#
+# The purpose of this file is mainly to define keybindings and settings.
+# For running more complex python code, please create a plugin in "plugins/" or
+# a command in "commands.py".
+#
+# Each line is a command that will be run before the user interface
+# is initialized. As a result, you can not use commands which rely
+# on the UI such as :delete or :mark.
+# ===================================================================
+
+# ===================================================================
+# == Options
+# ===================================================================
+
+# How many columns are there, and what are their relative widths?
+set column_ratios 1,3,4
+
+# Which files should be hidden? (regular expression)
+set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
+
+# Show hidden files? You can toggle this by typing 'zh'
+set show_hidden false
+
+# Ask for a confirmation when running the "delete" command?
+# Valid values are "always" (default), "never", "multiple"
+# With "multiple", ranger will ask only if you delete multiple files at once.
+set confirm_on_delete multiple
+
+# Which script is used to generate file previews?
+# ranger ships with scope.sh, a script that calls external programs (see
+# README for dependencies) to preview images, archives, etc.
+set preview_script ~/.config/ranger/scope.sh
+
+# Use the external preview script or display simple plain text previews?
+set use_preview_script true
+
+# Open all images in this directory when running certain image viewers
+# like feh or sxiv? You can still open selected files by marking them.
+set open_all_images true
+
+# Be aware of version control systems and display information.
+set vcs_aware false
+
+# State of the three backends git, hg, bzr. The possible states are
+# disabled, local (only show local info), enabled (show local and remote
+# information).
+set vcs_backend_git enabled
+set vcs_backend_hg disabled
+set vcs_backend_bzr disabled
+
+# Preview images in full color with the external command "w3mimgpreview"?
+# This requires the console web browser "w3m" and a supported terminal.
+# It has been successfully tested with "xterm" and "urxvt" without tmux.
+set preview_images true
+
+# Use a unicode "..." character to mark cut-off filenames?
+set unicode_ellipsis false
+
+# Show dotfiles in the bookmark preview box?
+set show_hidden_bookmarks true
+
+# Which colorscheme to use? These colorschemes are available by default:
+# default, jungle, snow
+set colorscheme default
+
+# Preview files on the rightmost column?
+# And collapse (shrink) the last column if there is nothing to preview?
+set preview_files true
+set preview_directories true
+set collapse_preview true
+
+# Save the console history on exit?
+set save_console_history true
+
+# Draw the status bar on top of the browser window (default: bottom)
+set status_bar_on_top false
+
+# Draw a progress bar in the status bar which displays the average state of all
+# currently running tasks which support progress bars?
+set draw_progress_bar_in_status_bar true
+
+# Draw borders around columns?
+set draw_borders true
+
+# Display the directory name in tabs?
+set dirname_in_tabs false
+
+# Enable the mouse support?
+set mouse_enabled true
+
+# Display the file size in the main column or status bar?
+set display_size_in_main_column true
+set display_size_in_status_bar true
+
+# Display files tags in all columns or only in main column?
+set display_tags_in_all_columns true
+
+# Set a title for the window?
+set update_title false
+
+# Set the title to "ranger" in the tmux program?
+set update_tmux_title false
+
+# Shorten the title if it gets long? The number defines how many
+# directories are displayed at once, 0 turns off this feature.
+set shorten_title 3
+
+# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
+set tilde_in_titlebar false
+
+# How many directory-changes or console-commands should be kept in history?
+set max_history_size 20
+set max_console_history_size 50
+
+# Try to keep so much space between the top/bottom border when scrolling:
+set scroll_offset 8
+
+# Flush the input after each key hit? (Noticable when ranger lags)
+set flushinput true
+
+# Padding on the right when there's no preview?
+# This allows you to click into the space to run the file.
+set padding_right true
+
+# Save bookmarks (used with mX and `X) instantly?
+# This helps to synchronize bookmarks between multiple ranger
+# instances but leads to *slight* performance loss.
+# When false, bookmarks are saved when ranger is exited.
+set autosave_bookmarks true
+
+# You can display the "real" cumulative size of directories by using the
+# command :get_cumulative_size or typing "dc". The size is expensive to
+# calculate and will not be updated automatically. You can choose
+# to update it automatically though by turning on this option:
+set autoupdate_cumulative_size false
+
+# Turning this on makes sense for screen readers:
+set show_cursor false
+
+# One of: size, basename, mtime, type
+set sort natural
+
+# Additional sorting options
+set sort_reverse false
+set sort_case_insensitive true
+set sort_directories_first true
+
+# Enable this if key combinations with the Alt Key don't work for you.
+# (Especially on xterm)
+set xterm_alt_key false
+
+# ===================================================================
+# == Local Options
+# ===================================================================
+# You can set local options that only affect a single directory.
+
+# Examples:
+# setlocal path=~/downloads sort mtime
+
+# ===================================================================
+# == Command Aliases in the Console
+# ===================================================================
+
+alias e edit
+alias q quit
+alias q! quitall
+alias qall quitall
+alias setl setlocal
+
+alias filter scout -prt
+alias find scout -aet
+alias mark scout -mr
+alias unmark scout -Mr
+alias search scout -rs
+alias search_inc scout -rts
+alias travel scout -aefiklst
+
+# ===================================================================
+# == Define keys for the browser
+# ===================================================================
+
+# Basic
+map Q quit!
+map q quit
+copymap q ZZ ZQ
+
+map R reload_cwd
+map <C-r> reset
+map <C-l> redraw_window
+map <C-c> abort
+map <esc> change_mode normal
+
+map i display_file
+map ? help
+map W display_log
+map w taskview_open
+map S shell $SHELL
+
+map : console
+map ; console
+map ! console shell
+map @ console -p6 shell %%s
+map # console shell -p
+map s console shell
+map r chain draw_possible_programs; console open_with
+map f console find
+map cd console cd
+
+# Tagging / Marking
+map t tag_toggle
+map ut tag_remove
+map "<any> tag_toggle tag=%any
+map <Space> mark_files toggle=True
+map v mark_files all=True toggle=True
+map uv mark_files all=True val=False
+map V toggle_visual_mode
+map uV toggle_visual_mode reverse=True
+
+# For the nostalgics: Midnight Commander bindings
+map <F1> help
+map <F3> display_file
+map <F4> edit
+map <F5> copy
+map <F6> cut
+map <F7> console mkdir
+map <F8> console delete
+map <F10> exit
+
+# In case you work on a keyboard with dvorak layout
+map <UP> move up=1
+map <DOWN> move down=1
+map <LEFT> move left=1
+map <RIGHT> move right=1
+map <HOME> move to=0
+map <END> move to=-1
+map <PAGEDOWN> move down=1 pages=True
+map <PAGEUP> move up=1 pages=True
+map <CR> move right=1
+map <DELETE> console delete
+map <INSERT> console touch
+
+# VIM-like
+copymap <UP> k
+copymap <DOWN> j
+copymap <LEFT> h
+copymap <RIGHT> l
+copymap <HOME> gg
+copymap <END> G
+copymap <PAGEDOWN> <C-F>
+copymap <PAGEUP> <C-B>
+
+map J move down=0.5 pages=True
+map K move up=0.5 pages=True
+copymap J <C-D>
+copymap K <C-U>
+
+# Jumping around
+map H history_go -1
+map L history_go 1
+map ] move_parent 1
+map [ move_parent -1
+map } traverse
+
+map gh cd ~
+map ge cd /etc
+map gu cd /usr
+map gd cd /dev
+map gl cd -r .
+map gL cd -r %f
+map go cd /opt
+map gv cd /var
+map gm cd /media
+map gM cd /mnt
+map gs cd /srv
+map gr cd /
+map gR eval fm.cd(ranger.RANGERDIR)
+map g/ cd /
+map g? cd /usr/share/doc/ranger
+
+# External Programs
+map E edit
+map du shell -p du --max-depth=1 -h --apparent-size
+map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
+map yp shell -d echo -n %d/%f | xsel -i
+map yd shell -d echo -n %d | xsel -i
+map yn shell -d echo -n %f | xsel -i
+
+# Filesystem Operations
+map = chmod
+
+map cw console rename
+map A eval fm.open_console('rename ' + fm.thisfile.basename)
+map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
+
+map pp paste
+map po paste overwrite=True
+map pl paste_symlink relative=False
+map pL paste_symlink relative=True
+map phl paste_hardlink
+map pht paste_hardlinked_subtree
+
+map dd cut
+map ud uncut
+map da cut mode=add
+map dr cut mode=remove
+
+map yy copy
+map uy uncut
+map ya copy mode=add
+map yr copy mode=remove
+
+# Temporary workarounds
+map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
+map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
+map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
+map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
+map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
+map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
+map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
+map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
+
+# Searching
+map / console search
+map n search_next
+map N search_next forward=False
+map ct search_next order=tag
+map cs search_next order=size
+map ci search_next order=mimetype
+map cc search_next order=ctime
+map cm search_next order=mtime
+map ca search_next order=atime
+
+# Tabs
+map <C-n> tab_new ~
+map <C-w> tab_close
+map <TAB> tab_move 1
+map <S-TAB> tab_move -1
+map <A-Right> tab_move 1
+map <A-Left> tab_move -1
+map gt tab_move 1
+map gT tab_move -1
+map gn tab_new ~
+map gc tab_close
+map uq tab_restore
+map <a-1> tab_open 1
+map <a-2> tab_open 2
+map <a-3> tab_open 3
+map <a-4> tab_open 4
+map <a-5> tab_open 5
+map <a-6> tab_open 6
+map <a-7> tab_open 7
+map <a-8> tab_open 8
+map <a-9> tab_open 9
+
+# Sorting
+map or toggle_option sort_reverse
+map os chain set sort=size; set sort_reverse=False
+map ob chain set sort=basename; set sort_reverse=False
+map on chain set sort=natural; set sort_reverse=False
+map om chain set sort=mtime; set sort_reverse=False
+map oc chain set sort=ctime; set sort_reverse=False
+map oa chain set sort=atime; set sort_reverse=False
+map ot chain set sort=type; set sort_reverse=False
+
+map oS chain set sort=size; set sort_reverse=True
+map oB chain set sort=basename; set sort_reverse=True
+map oN chain set sort=natural; set sort_reverse=True
+map oM chain set sort=mtime; set sort_reverse=True
+map oC chain set sort=ctime; set sort_reverse=True
+map oA chain set sort=atime; set sort_reverse=True
+map oT chain set sort=type; set sort_reverse=True
+
+map dc get_cumulative_size
+
+# Settings
+map zc toggle_option collapse_preview
+map zd toggle_option sort_directories_first
+map zh toggle_option show_hidden
+map <C-h> toggle_option show_hidden
+map zi toggle_option flushinput
+map zm toggle_option mouse_enabled
+map zp toggle_option preview_files
+map zP toggle_option preview_directories
+map zs toggle_option sort_case_insensitive
+map zu toggle_option autoupdate_cumulative_size
+map zv toggle_option use_preview_script
+map zf console filter
+
+# Bookmarks
+map `<any> enter_bookmark %any
+map '<any> enter_bookmark %any
+map m<any> set_bookmark %any
+map um<any> unset_bookmark %any
+
+map m<bg> draw_bookmarks
+copymap m<bg> um<bg> `<bg> '<bg>
+
+# Generate all the chmod bindings with some python help:
+eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
+eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
+eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
+eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
+eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
+
+eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
+eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
+eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
+eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
+eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
+
+# ===================================================================
+# == Define keys for the console
+# ===================================================================
+# Note: Unmapped keys are passed directly to the console.
+
+# Basic
+cmap <tab> eval fm.ui.console.tab()
+cmap <s-tab> eval fm.ui.console.tab(-1)
+cmap <ESC> eval fm.ui.console.close()
+cmap <CR> eval fm.ui.console.execute()
+cmap <C-l> redraw_window
+
+copycmap <ESC> <C-c>
+copycmap <CR> <C-j>
+
+# Move around
+cmap <up> eval fm.ui.console.history_move(-1)
+cmap <down> eval fm.ui.console.history_move(1)
+cmap <left> eval fm.ui.console.move(left=1)
+cmap <right> eval fm.ui.console.move(right=1)
+cmap <home> eval fm.ui.console.move(right=0, absolute=True)
+cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
+
+# Line Editing
+cmap <backspace> eval fm.ui.console.delete(-1)
+cmap <delete> eval fm.ui.console.delete(0)
+cmap <C-w> eval fm.ui.console.delete_word()
+cmap <C-k> eval fm.ui.console.delete_rest(1)
+cmap <C-u> eval fm.ui.console.delete_rest(-1)
+cmap <C-y> eval fm.ui.console.paste()
+
+# And of course the emacs way
+copycmap <up> <C-p>
+copycmap <down> <C-n>
+copycmap <left> <C-b>
+copycmap <right> <C-f>
+copycmap <home> <C-a>
+copycmap <end> <C-e>
+copycmap <delete> <C-d>
+copycmap <backspace> <C-h>
+
+# Note: There are multiple ways to express backspaces. <backspace> (code 263)
+# and <backspace2> (code 127). To be sure, use both.
+copycmap <backspace> <backspace2>
+
+# This special expression allows typing in numerals:
+cmap <allow_quantifiers> false
+
+# ===================================================================
+# == Pager Keybindings
+# ===================================================================
+
+# Movement
+pmap <down> pager_move down=1
+pmap <up> pager_move up=1
+pmap <left> pager_move left=4
+pmap <right> pager_move right=4
+pmap <home> pager_move to=0
+pmap <end> pager_move to=-1
+pmap <pagedown> pager_move down=1.0 pages=True
+pmap <pageup> pager_move up=1.0 pages=True
+pmap <C-d> pager_move down=0.5 pages=True
+pmap <C-u> pager_move up=0.5 pages=True
+
+copypmap <UP> k <C-p>
+copypmap <DOWN> j <C-n> <CR>
+copypmap <LEFT> h
+copypmap <RIGHT> l
+copypmap <HOME> g
+copypmap <END> G
+copypmap <C-d> d
+copypmap <C-u> u
+copypmap <PAGEDOWN> n f <C-F> <Space>
+copypmap <PAGEUP> p b <C-B>
+
+# Basic
+pmap <ESC> pager_close
+copypmap <ESC> q Q i <F3>
+pmap E edit_file
+
+# ===================================================================
+# == Taskview Keybindings
+# ===================================================================
+
+# Movement
+tmap <up> taskview_move up=1
+tmap <down> taskview_move down=1
+tmap <home> taskview_move to=0
+tmap <end> taskview_move to=-1
+tmap <pagedown> taskview_move down=1.0 pages=True
+tmap <pageup> taskview_move up=1.0 pages=True
+tmap <C-d> taskview_move down=0.5 pages=True
+tmap <C-u> taskview_move up=0.5 pages=True
+
+copytmap <UP> k <C-p>
+copytmap <DOWN> j <C-n> <CR>
+copytmap <HOME> g
+copytmap <END> G
+copytmap <C-u> u
+copytmap <PAGEDOWN> n f <C-F> <Space>
+copytmap <PAGEUP> p b <C-B>
+
+# Changing priority and deleting tasks
+tmap J eval -q fm.ui.taskview.task_move(-1)
+tmap K eval -q fm.ui.taskview.task_move(0)
+tmap dd eval -q fm.ui.taskview.task_remove()
+tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
+tmap <pageup> eval -q fm.ui.taskview.task_move(0)
+tmap <delete> eval -q fm.ui.taskview.task_remove()
+
+# Basic
+tmap <ESC> taskview_close
+copytmap <ESC> q Q w <C-c>
+#+end_src
+
+*** scope.sh
+:PROPERTIES:
+:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
+:END:
+
+#+begin_src sh :tangle no
+# ranger supports enhanced previews. If the option "use_preview_script"
+# is set to True and this file exists, this script will be called and its
+# output is displayed in ranger. ANSI color codes are supported.
+
+# NOTES: This script is considered a configuration file. If you upgrade
+# ranger, it will be left untouched. (You must update it yourself.)
+# Also, ranger disables STDIN here, so interactive scripts won't work properly
+
+# Meanings of exit codes:
+# code | meaning | action of ranger
+# -----+------------+-------------------------------------------
+# 0 | success | success. display stdout as preview
+# 1 | no preview | failure. display no preview at all
+# 2 | plain text | display the plain content of the file
+# 3 | fix width | success. Don't reload when width changes
+# 4 | fix height | success. Don't reload when height changes
+# 5 | fix both | success. Don't ever reload
+
+# Meaningful aliases for arguments:
+path="$1" # Full path of the selected file
+width="$2" # Width of the preview pane (number of fitting characters)
+height="$3" # Height of the preview pane (number of fitting characters)
+
+maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
+
+# Find out something about the file:
+mimetype=$(file --mime-type -Lb "$path")
+extension=${path##*.}
+
+# Functions:
+# runs a command and saves its output into $output. Useful if you need
+# the return value AND want to use the output in a pipe
+try() { output=$(eval '"$@"'); }
+
+# writes the output of the previouosly used "try" command
+dump() { echo "$output"; }
+
+# a common post-processing function used after most commands
+trim() { head -n "$maxln"; }
+
+# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
+highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
+
+case "$extension" in
+ # Archive extensions:
+ 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
+ rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
+ try als "$path" && { dump | trim; exit 0; }
+ try acat "$path" && { dump | trim; exit 3; }
+ try bsdtar -lf "$path" && { dump | trim; exit 0; }
+ exit 1;;
+ rar)
+ try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
+ # PDF documents:
+ pdf)
+ try pdftotext -l 10 -nopgbrk -q "$path" - && \
+ { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
+ # BitTorrent Files
+ torrent)
+ try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
+ # HTML Pages:
+ htm|html|xhtml)
+ try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
+ try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
+ try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
+ ;; # fall back to highlight/cat if the text browsers fail
+esac
+
+case "$mimetype" in
+ # Syntax highlight for text files:
+ text/* | */xml)
+ try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
+ # Ascii-previews of images:
+ image/*)
+ img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
+ # Display information about media files:
+ video/* | audio/*)
+ exiftool "$path" && exit 5
+ # Use sed to remove spaces so the output fits into the narrow window
+ try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
+esac
+
+exit 1
+#+end_src
+
+** redshift
+:PROPERTIES:
+:header-args+: :tangle ~/.config/redshift.conf :comments none
+:END:
+
+#+begin_src conf
+; Global settings for redshift
+[redshift]
+; Set the day and night screen temperatures (Neutral is 6500K)
+;temp-day=5700
+;temp-night=3500
+
+;temp-day=6500
+temp-day=6200
+;temp-night=4800
+;temp-night=5000
+;temp-night=4500
+temp-night=4000
+
+; Enable/Disable a smooth transition between day and night
+; 0 will cause a direct change from day to night screen temperature.
+; 1 will gradually increase or decrease the screen temperature.
+transition=1
+
+; Set the screen brightness. Default is 1.0.
+;brightness=0.9
+; It is also possible to use different settings for day and night
+; since version 1.8.
+;brightness-day=0.7
+;brightness-night=0.4
+; Set the screen gamma (for all colors, or each color channel
+; individually)
+;gamma=0.8
+;gamma=1.0
+;gamma=0.8:0.7:0.8
+; This can also be set individually for day and night since
+; version 1.10.
+;gamma-day=0.8:0.7:0.8
+;gamma-night=0.6
+
+; Set the location-provider: 'geoclue2' or 'manual'
+; type 'redshift -l list' to see possible values.
+; The location provider settings are in a different section.
+;location-provider=manual
+location-provider=geoclue2
+
+; Set the adjustment-method: 'randr', 'vidmode'
+; type 'redshift -m list' to see all possible values.
+; 'randr' is the preferred method, 'vidmode' is an older API.
+; but works in some cases when 'randr' does not.
+; The adjustment method settings are in a different section.
+adjustment-method=randr
+
+; Configuration of the location-provider:
+; type 'redshift -l PROVIDER:help' to see the settings.
+; ex: 'redshift -l manual:help'
+; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
+; are negative numbers.
+;[manual]
+;lat=48.1
+;lon=11.6
+
+; Configuration of the adjustment-method
+; type 'redshift -m METHOD:help' to see the settings.
+; ex: 'redshift -m randr:help'
+; In this example, randr is configured to adjust screen 1.
+; Note that the numbering starts from 0, so this is actually the
+; second screen. If this option is not specified, Redshift will try
+; to adjust _all_ screens.
+;[randr]
+;screen=1
+#+end_src
+
+** rofi
+:PROPERTIES:
+:header-args+: :tangle ~/.config/rofi/config
+:END:
+
+#+begin_src conf
+rofi.font: Ubuntu Mono 13
+! rofi.font: Inconsolata 16
+! rofi.font: Iosevka 13
+! rofi.font: Source Code Pro 11
+rofi.modi: run,window
+! rofi.width: 640
+rofi.width: 600
+!rofi.location: 2
+!rofi.yoffset: 200
+rofi.monitor: -1
+!rofi.lines: 10
+
+!rofi.theme: /usr/share/rofi/themes//Arc.rasi
+!rofi.theme: /usr/share/rofi/themes//Paper.rasi
+!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
+
+rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
+#+end_src
+
+** rofi-pass
+:PROPERTIES:
+:header-args+: :tangle ~/.config/rofi-pass/config
+:END:
+
+#+begin_src conf
+# permanently set alternative root dir
+# root=/path/to/root
+
+# rofi command. Make sure to have "$@" as last argument
+_rofi () {
+ #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
+ rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
+}
+
+# xdotool needs the keyboard layout to be set using setxkbmap
+# You can do this in your autostart scripts (e.g. xinitrc)
+
+# If for some reason, you cannot do this, you can set the command here.
+# and set fix_layout to true
+fix_layout=false
+
+layout_cmd () {
+ setxkbmap us
+}
+
+# fields to be used
+URL_field='url'
+USERNAME_field='user'
+AUTOTYPE_field='autotype'
+
+# delay to be used for :delay keyword
+delay=2
+
+## Programs to be used
+# Editor
+EDITOR='gvim -f'
+
+# Browser
+BROWSER='chromium'
+
+## Misc settings
+
+default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
+auto_enter='false'
+notify='false'
+default_autotype='user :tab pass'
+
+# color of the help messages
+# leave empty for autodetection
+help_color="#4872FF"
+
+# Clipboard settings
+# Possible options: primary, clipboard, both
+clip=primary
+
+# Options for generating new password entries
+# default_user is also used for password files that have no user field.
+default_user=aminb
+default_user2=aminban
+password_length=30
+
+# Custom Keybindings
+#autotype="Alt+1"
+autotype="Alt+m"
+type_user="Alt+2"
+type_pass="Alt+3"
+open_url="Alt+4"
+copy_name="Alt+u"
+copy_url="Alt+l"
+copy_pass="Alt+p"
+show="Alt+o"
+copy_entry="Alt+2"
+type_entry="Alt+1"
+copy_menu="Alt+c"
+action_menu="Alt+a"
+type_menu="Alt+t"
+help="Alt+h"
+switch="Alt+x"
+insert_pass="Alt+n"
+#+end_src
+
+** TLP
+
+*** TODO enigma
+*** plasma
+
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power saving
+# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
+
+# Hint: some features are disabled by default, remove the leading # to enable
+# them.
+
+# Set to 0 to disable, 1 to enable TLP.
+TLP_ENABLE=1
+
+# Operation mode when no power supply can be detected: AC, BAT.
+# Concerns some desktop and embedded hardware only.
+TLP_DEFAULT_MODE=AC
+
+# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
+# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
+TLP_PERSISTENT_DEFAULT=0
+
+# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Hint: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel default values are used.
+
+# Select a CPU frequency scaling governor.
+# Intel Core i processor with intel_pstate driver:
+# powersave(*), performance.
+# Older hardware with acpi-cpufreq driver:
+# ondemand(*), powersave, performance, conservative, schedutil.
+# (*) is recommended.
+# Hint: use tlp-stat -p to show the active driver and available governors.
+# Important:
+# powersave for intel_pstate and ondemand for acpi-cpufreq are power
+# efficient for *almost all* workloads and therefore kernel and most
+# distributions have chosen them as defaults. If you still want to change,
+# you should know what you're doing! You *must* disable your distribution's
+# governor settings or conflicts will occur.
+#CPU_SCALING_GOVERNOR_ON_AC=powersave
+#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your CPU. For available frequencies see
+# the output of tlp-stat -p.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set energy performance hints (HWP) for Intel P-state governor:
+# performance, balance_performance, default, balance_power, power
+# Values are given in order of increasing power saving.
+# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
+CPU_HWP_ON_AC=balance_performance
+CPU_HWP_ON_BAT=balance_power
+
+# Set Intel P-state performance: 0..100 (%).
+# Limit the max/min P-state to control the power dissipation of the CPU.
+# Values are stated as a percentage of the available performance.
+# Requires an Intel Core i processor with intel_pstate driver.
+#CPU_MIN_PERF_ON_AC=0
+#CPU_MAX_PERF_ON_AC=100
+#CPU_MIN_PERF_ON_BAT=0
+#CPU_MAX_PERF_ON_BAT=30
+
+# Set the CPU "turbo boost" feature: 0=disable, 1=allow
+# Requires an Intel Core i processor.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used CPU cores/hyper-threads under light load conditions:
+# 0=disable, 1=enable.
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog:
+# 0=disable (default, saves power), 1=enable (for kernel debugging only).
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
+# Frequency voltage pairs are written to:
+# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Set CPU performance versus energy savings policy:
+# performance, balance-performance, default, balance-power, power.
+# Values are given in order of increasing power saving.
+# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
+ENERGY_PERF_POLICY_ON_AC=performance
+ENERGY_PERF_POLICY_ON_BAT=balance-power
+
+# Disk devices; separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk ID also (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Disk advanced power management level: 1..254, 255 (max saving, min, off).
+# Levels 1..127 may spin down the disk; 255 allowable on most drives.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="128 128"
+
+# Hard disk spin down timeout:
+# 0: spin down disabled
+# 1..240: timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# See 'man hdparm' for details.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the kernel default scheduler for the particular disk.
+#DISK_IOSCHED="cfq cfq"
+
+# AHCI link power management (ALPM) for disk devices:
+# min_power, med_power_with_dipm(*), medium_power, max_performance.
+# (*) Kernel >= 4.15 required, then recommended.
+# Multiple values separated with spaces are tried sequentially until success.
+SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
+SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
+
+# Exclude host devices from AHCI link power management.
+# Separate multiple hosts with spaces.
+#SATA_LINKPWR_BLACKLIST="host1"
+
+# Runtime Power Management for AHCI host and disks devices:
+# on=disable, auto=enable.
+# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+#AHCI_RUNTIME_PM_ON_AC=on
+#AHCI_RUNTIME_PM_ON_BAT=on
+
+# Seconds of inactivity before disk is suspended.
+AHCI_RUNTIME_PM_TIMEOUT=15
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default, performance, powersave.
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
+# auto = mid on BAT, high on AC; default = use hardware defaults.
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# Radeon dynamic power management method (DPM): battery, performance.
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# Radeon DPM performance level: auto, low, high; auto is recommended.
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
+WIFI_PWR_ON_AC=off
+WIFI_PWR_ON_BAT=on
+
+# Disable wake on LAN: Y/N.
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables, >=1 enables power saving (recommended: 1).
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=0
+
+# Disable controller too (HDA only): Y/N.
+SOUND_POWER_SAVE_CONTROLLER=N
+
+# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
+# Drive can be powered on again by releasing (and reinserting) the eject lever
+# or by pressing the disc eject button on newer models.
+# Note: an UltraBay/MediaBay hard disk is never powered off.
+BAY_POWEROFF_ON_AC=0
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0).
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Exclude PCI(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+RUNTIME_PM_BLACKLIST="01:00.0"
+
+# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
+# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
+# prevents accidential power-on of dGPU in hybrid graphics setups.
+# Use "" to disable the feature completely.
+# Separate multiple drivers with spaces.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
+
+# Set to 0 to disable, 1 to enable USB autosuspend feature.
+USB_AUTOSUSPEND=1
+
+# Exclude listed devices from USB autosuspend (separate with spaces).
+# Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# Bluetooth devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_BTUSB=0
+
+# Phone devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude (enable charging).
+USB_BLACKLIST_PHONE=0
+
+# Printers are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_PRINTER=1
+
+# WWAN devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_WWAN=1
+
+# Include listed devices into USB autosuspend even if already excluded
+# by the blacklists above (separate with spaces).
+# Use lsusb to get the ids.
+#USB_WHITELIST="1111:2222 3333:4444"
+
+# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
+# (workaround for USB devices that cause shutdown problems).
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
+
+# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
+# on system startup: 0=disable, 1=enable.
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+# are ignored when this is enabled!
+#RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=1
+
+# Radio devices to disable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+
+# Radio devices to enable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
+
+# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
+# (workaround for devices that are blocking shutdown).
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
+
+# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
+# (to prevent other operating systems from missing radios).
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
+
+# Radio devices to enable on AC: bluetooth, wifi, wwan.
+#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
+
+# Radio devices to disable on battery: bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
+
+# Radio devices to disable on battery when not in use (not connected):
+# bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
+
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
+# required). Charging starts when the remaining capacity falls below the
+# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
+# Main / Internal battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay / Slice / Replaceable battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
+
+# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
+#RESTORE_THRESHOLDS_ON_BAT=1
+
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth, wifi, wwan.
+
+# Hints:
+# - Parameters are disabled by default, remove the leading # to enable them
+# - Separate multiple radio devices with spaces
+
+# Radio devices to disable on connect.
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
+
+# Radio devices to enable on disconnect.
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
+
+# Radio devices to enable/disable when docked.
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked.
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+#+end_src
+
+** X
+
+*** xprofile
+:PROPERTIES:
+:header-args+: :tangle ~/.xprofile
+:END:
+
+=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
+contrary, it's automatically sourced by LightDM, my display manager of
+choice.
+
+#+begin_src sh
+xset -b # disable bell
+xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
+
+# setxkbmap -option compose:ralt
+
+setxkbmap -option ctrl:nocaps # turn capslock into control
+setxkbmap -option altwin:swap_alt_win # swap alt and super
+
+if [ $(hostname) = "plasma" ]
+then
+ setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
+fi
+
+if [ $(hostname) = "enigma" ]
+then
+ xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
+fi
+
+light -Scrs "intel_backlight" 2
+
+source $HOME/.zprofile
+
+export _JAVA_AWT_WM_NONREPARENTING=1
+export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
+
+if [ $(hostname) = "plasma" ]
+then
+ unlock-def-gk.py &
+fi
+
+bspwm &
+#+end_src
+
+*** X resources
+
+**** Xresources
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
+:END:
+
+#+begin_src conf-xdefaults
+#include ".Xresources.d/fonts"
+! #include ".Xresources.d/colors"
+#include ".Xresources.d/emacs"
+#include ".Xresources.d/rxvt-unicode"
+#+end_src
+
+**** Xresources.d
+
+***** fonts
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
+:END:
+
+#+begin_src conf-xdefaults
+Xft.lcdfilter: lcddefault
+Xft.antialias: true
+Xft.autohint: 0
+Xft.hinting: true
+Xft.hintstyle: hintslight
+! Xft.hintstyle: hintfull
+Xft.rgba: rgb
+Xft.dpi: 96
+#+end_src
+
+***** colors
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
+:END:
+
+#+begin_src conf-xdefaults :tangle no
+#include "gruvbox-light.xresources"
+! #include "gruvbox-dark.xresources"
+#include "gruvbox-urxvt256.xresources"
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-light.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 6 Sep 2014
+! -----------------------------------------------------------------------------
+
+! hard contrast: *background: #f9f5d7
+*background: #fbf1c7
+! soft contrast: *background: #f2e5bc
+*foreground: #3c3836
+! Black + DarkGrey
+*color0: #fdf4c1
+*color8: #928374
+! DarkRed + Red
+*color1: #cc241d
+*color9: #9d0006
+! DarkGreen + Green
+*color2: #98971a
+*color10: #79740e
+! DarkYellow + Yellow
+*color3: #d79921
+*color11: #b57614
+! DarkBlue + Blue
+*color4: #458588
+*color12: #076678
+! DarkMagenta + Magenta
+*color5: #b16286
+*color13: #8f3f71
+! DarkCyan + Cyan
+*color6: #689d6a
+*color14: #427b58
+! LightGrey + White
+*color7: #7c6f64
+*color15: #3c3836
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-dark.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 6 Sep 2014
+! -----------------------------------------------------------------------------
+
+! hard contrast: *background: #1d2021
+*background: #282828
+! soft contrast: *background: #32302f
+*foreground: #ebdbb2
+! Black + DarkGrey
+*color0: #282828
+*color8: #928374
+! DarkRed + Red
+*color1: #cc241d
+*color9: #fb4934
+! DarkGreen + Green
+*color2: #98971a
+*color10: #b8bb26
+! DarkYellow + Yellow
+*color3: #d79921
+*color11: #fabd2f
+! DarkBlue + Blue
+*color4: #458588
+*color12: #83a598
+! DarkMagenta + Magenta
+*color5: #b16286
+*color13: #d3869b
+! DarkCyan + Cyan
+*color6: #689d6a
+*color14: #8ec07c
+! LightGrey + White
+*color7: #a89984
+*color15: #ebdbb2
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-urxvt256.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 13 Dec 2013
+! -----------------------------------------------------------------------------
+
+URxvt.color24: #076678
+URxvt.color66: #427b58
+URxvt.color88: #9d0006
+URxvt.color96: #8f3f71
+URxvt.color100: #79740e
+URxvt.color108: #8ec07c
+URxvt.color109: #83a598
+URxvt.color130: #af3a03
+URxvt.color136: #b57614
+URxvt.color142: #b8bb26
+URxvt.color167: #fb4934
+URxvt.color175: #d3869b
+URxvt.color208: #fe8019
+URxvt.color214: #fabd2f
+URxvt.color223: #ebdbb2
+URxvt.color228: #f2e5bc
+URxvt.color229: #fbf1c7
+URxvt.color230: #f9f5d7
+URxvt.color234: #1d2021
+URxvt.color235: #282828
+URxvt.color236: #32302f
+URxvt.color237: #3c3836
+URxvt.color239: #504945
+URxvt.color241: #665c54
+URxvt.color243: #7c6f64
+URxvt.color244: #928374
+URxvt.color245: #928374
+URxvt.color246: #a89984
+URxvt.color248: #bdae93
+URxvt.color250: #d5c4a1
+#+end_src
+
+***** emacs
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
+:END:
+
+#+begin_src conf-xdefaults
+Emacs.menuBar: off
+Emacs.toolBar: off
+Emacs.verticalScrollBars: off
+Emacs.cursorBlink: off
+Emacs.FontBackend: xft,x
+! Emacs.font: Ubuntu Mono-12
+! Emacs.font: Triplicate T4C-11
+! Emacs.font: Ubuntu Mono-10.5
+! Emacs.font: Ubuntu Mono-12
+! Emacs.font: Iosevka-11
+
+! Emacs.font: Fira Mono:size=15
+! Emacs.font: DejaVu Sans Mono:size=15
+! Emacs.font: Inconsolata:size=17
+! Emacs.font: Inconsolata:size=16
+! Emacs.font: Inconsolata LGC:size=14
+! Emacs.font: Source Code Pro Medium-10.5
+Emacs.font: Ubuntu Mono:size=16
+! Emacs.font: Iosevka:size=16
+#+end_src
+
+***** rxvt-unicode
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
+:END:
+
+#+begin_src conf-xdefaults
+! Font
+URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
+URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
+URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
+URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
+
+URxvt.xftAntialias: true
+URxvt.letterSpace: 0
+
+URxvt.depth: 0
+URxvt.loginShell: true
+URxvt.saveLines: 100000
+URxvt.internalBorder: 3
+URxvt.lineSpace: 0
+URxvt.scrollBar: false
+URxvt.scrollStyle: rxvt
+URxvt*scrollTtyOutput: false
+URxvt*scrollWithBuffer: true
+URxvt*scrollTtyKeypress: true
+URxvt.keysym.Shift-Up: command:\033]720;1\007
+URxvt.keysym.Shift-Down: command:\033]721;1\007
+
+URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
+URxvt.perl-ext: bidi
+URxvt.bidi.enabled: 1
+URxvt.url-select.launcher: firefox
+URxvt.url-select.underline: true
+URxvt.keysym.M-u: perl:url-select:select_next
+URxvt.keysym.M-Escape: perl:keyboard-select:activate
+URxvt.keysym.M-s: perl:keyboard-select:search
+URxvt.url-launcher: /usr/bin/firefox
+URxvt.matcher.button: 1
+URxvt.iso14755: false
+URxvt.iso14755_53: false
+URxvt.keysym.M-c: perl:clipboard:copy
+URxvt.keysym.M-v: perl:clipboard:paste
+URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
+URxvt.keysym.C-Up: font-size:increase
+URxvt.keysym.C-Down: font-size:decrease
+URxvt.keysym.C-S-Up: font-size:incglobal
+URxvt.keysym.C-S-Down: font-size:decglobal
+URxvt.keysym.C-equal: font-size:reset
+!URxvt.keysym.C-question: font-size:show
+
+URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
+
+!urxvt*foreground: white
+!urxvt*background: black
+
+!*color0: #2E3436
+!*color1: #a40000
+!*color2: #4E9A06
+!*color3: #C4A000
+!*color4: #3465A4
+!*color5: #75507B
+!*color6: #ce5c00
+!*color7: #babdb9
+!*color8: #555753
+!*color9: #EF2929
+!*color10: #8AE234
+!*color11: #FCE94F
+!*color12: #729FCF
+!*color13: #AD7FA8
+!*color14: #fcaf3e
+!*color15: #EEEEEC
+
+!URxvt.foreground: #C8C8C8
+!URxvt.background: #FFFFFF
+
+!! black
+!*color0: #2E3436
+!*color8: #555753
+!! red
+!*color1: #a40000
+!*color9: #EF2929
+!! green
+!*color2: #4E9A06
+!*color10: #8AE234
+!! yellow
+!*color3: #C4A000
+!*color11: #FCE94F
+!! blue
+!*color4: #3465A4
+!*color12: #729FCF
+!! purple
+!*color5: #75507B
+!*color13: #AD7FA8
+!! orange (replaces cyan)
+!*color6: #ce5c00
+!*color14: #fcaf3e
+!! white
+!*color7: #babdb9
+!*color15: #EEEEEC
+
+! Tango colour theme for rxvt-unicode
+URxvt.background: #FFFFFF
+URxvt.foreground: #000000
+
+! Black
+URxvt.color0: #2E3436
+URxvt.color8: #757773
+
+! Red
+URxvt.color1: #CC0000
+URxvt.color9: #EF2929
+
+! Green
+URxvt.color2: #4E9A06
+URxvt.color10: #8AE234
+
+! Yellow
+URxvt.color3: #C4A000
+URxvt.color11: #FCE94F
+
+! Blue
+URxvt.color4: #3465A4
+URxvt.color12: #729FCF
+
+! Magenta
+URxvt.color5: #75507B
+URxvt.color13: #AD7FA8
+
+!! Cyan
+!URxvt.color6: #06989A
+!URxvt.color14: #34E2E2
+! orange (replaces cyan)
+*color6: #ce5c00
+*color14: #fcaf3e
+
+! White
+URxvt.color7: #D3D7CF
+URxvt.color15: #EEEEEC
+#+end_src
+
+** XDG
+:PROPERTIES:
+:header-args+: :tangle ~/.config/user-dirs.dirs
+:END:
+
+#+begin_src conf
+XDG_DESKTOP_DIR="$HOME/Desktop"
+XDG_DOCUMENTS_DIR="$HOME/usr/docs"
+XDG_DOWNLOAD_DIR="$HOME/usr/dls"
+XDG_MUSIC_DIR="$HOME/usr/music"
+XDG_PICTURES_DIR="$HOME/usr/pics"
+XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
+XDG_TEMPLATES_DIR="$HOME/usr/Templates"
+XDG_VIDEOS_DIR="$HOME/usr/vids"
+#+end_src
+
+** Zathura
+:PROPERTIES:
+:header-args+: :tangle ~/.config/zathura/zathurarc
+:END:
+
+#+begin_src conf
+set smooth-scroll true
+set selection-clipboard clipboard
+set zoom-step 05
+set default-bg "#272727"
+set statusbar-bg "#272727"
+set inputbar-bg "#373737"
+#+end_src
+
+** Zsh
+
+My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
+[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
+installed.
+
+*** zimrc
+:PROPERTIES:
+:header-args+: :tangle ~/.zimrc
+:END:
+
+#+begin_src sh
+
+
+#################
+# CORE SETTINGS #
+#################
+
+#
+# Zim settings
+#
+
+# Select what modules you would like enabled.
+# The second line of modules may depend on options set by modules in the first
+# line. These dependencies are noted on the respective module's README.md.
+zmodules=(directory environment git git-info history input ssh utility custom \
+ syntax-highlighting history-substring-search prompt completion)
+
+
+###################
+# MODULE SETTINGS #
+###################
+
+#
+# Prompt
+#
+
+# Set your desired prompt here
+zprompt_theme='pure'
+#PURE_PROMPT_SYMBOL=λ
+#PURE_PROMPT_SYMBOL=δ
+PURE_PROMPT_SYMBOL=➜
+
+#
+# Completion
+#
+
+# set an optional host-specific filename for the completion cache file
+# if none is provided, the default '.zcompdump' is used.
+#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
+
+#
+# Utility
+#
+
+# Uncomment to enable command correction prompts
+# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
+setopt CORRECT
+
+#
+# Environment
+#
+
+# Set the string below to the desired terminal title format string.
+# The terminal title is redrawn upon directory change, however, variables like
+# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
+# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
+# The example below uses the following format: 'username@host:/current/directory'
+ztermtitle='%n@%m:%~'
+
+#
+# Input
+#
+
+# Uncomment to enable double-dot expansion.
+# This appends '../' to your input for each '.' you type after an initial '..'
+#zdouble_dot_expand='true'
+
+#
+# Syntax-Highlighting
+#
+
+# This determines what highlighters will be used with the syntax-highlighting module.
+# Documentation of the highlighters can be found here:
+# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
+# For (u)rxvt, termite and gnome-terminal users,
+# removing the 'cursor' highlighter will fix the disappearing cursor problem
+#zhighlighters=(main brackets cursor)
+zhighlighters=(main brackets pattern)
+
+
+#
+# SSH
+#
+
+# Load these ssh identities with the ssh module
+zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
+
+
+#
+# Pacman
+#
+
+# Set (optional) pacman front-end.
+zpacman_frontend='yay'
+
+# Load any helper scripts as defined here
+#zpacman_helper=(aur)
+#+end_src
+
+*** zlogin
+:PROPERTIES:
+:header-args+: :tangle ~/.zlogin
+:END:
+
+#+begin_src sh
+
+
+#
+# User configuration sourced by login shells
+#
+
+# Initialize zim
+[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
+#+end_src
+
+*** zprofile
+:PROPERTIES:
+:header-args+: :tangle ~/.zprofile
+:END:
+
+#+begin_src sh
+#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
+#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
+export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
+export XDG_CONFIG_HOME=$HOME/.config
+export XDG_DATA_HOME=$HOME/.local/share
+export XDG_DATA_DIRS=/usr/local/share:/usr/share
+export MAILDIR="$HOME/mail"
+export CVS_RSH=ssh
+#export MATHMODELS=$HOME/src/eiffel/mathmodels
+#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
+#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
+
+# Eiffel2Java stuff
+#export JAVA_HOME=/usr/lib/jvm/default
+#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
+#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
+#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
+
+#export PATH="$HOME/usr/build/pvs:$PATH"
+#export SBCLISP_HOME=/usr/share/sbcl-source
+#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
+
+export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
+
+#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
+#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
+
+if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
+#+end_src
+
+*** zshenv
+:PROPERTIES:
+:header-args+: :tangle ~/.zshenv
+:END:
+
+#+begin_src sh
+# Ensure that a non-login, non-interactive shell has a defined environment.
+if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
+ source "${ZDOTDIR:-$HOME}/.zprofile"
+fi
+#+end_src
+
+*** zshrc
+:PROPERTIES:
+:header-args+: :tangle ~/.zshrc
+:END:
+
+#+begin_src sh
+# Bash-like navigation
+#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
+#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
+export WORDCHARS='*?[]~=&;!#$%^(){}<>'
+#ZLE_SPACE_SUFFIX_CHARS=$'|&'
+
+#disable -r time # disable shell reserved word
+#alias time='time -p' # -p for POSIX output
+
+# rehash if last command was pacaur or pacman
+# (so that zsh picks up changes in $PATH immediately)
+TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
+
+#
+# User configuration sourced by interactive shells
+#
+
+# Change default zim location
+export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
+
+# Start zim
+[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
+
+ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
+#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
+
+setopt globdots
+
+source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
+source ~/.zsh/zsh-autopair/autopair.zsh
+
+
+### fzf ###
+
+source /usr/share/fzf/key-bindings.zsh
+source /usr/share/fzf/completion.zsh
+
+# Accept history selection instead of putting it on
+# the command line
+fzf-history-widget-accept() {
+ fzf-history-widget
+ zle accept-line
+}
+#zle -N fzf-history-widget-accept
+#bindkey '^R' fzf-history-widget-accept
+
+# alt+c preview
+export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
+
+### fzf ###
+
+
+# aliases
+alias mpv="mpv --ytdl-format mp4"
+alias mv="mv -iv"
+alias cp="cp -iv"
+alias scl=systemctl
+alias jcl=journalctl
+alias m="mbsync -Va; getmail; notmuch new"
+alias best="youtube-dl -f best"
+alias nixx="ssh amin@nix.aminb.org"
+alias fence="ssh aminb@fencepost.gnu.org"
+
+aur() {
+ cd ~/usr/build
+ git clone https://aur.archlinux.org/${1}.git
+ cd ${1}
+}
+
+# i-beam cursor
+echo -e "\033[5 q"
+#echo -e "\033[6 q"
+#+end_src
+
projects / ~bandali / configs / blobdiff