This section contains the configuration files (dotfiles) of various
programs I use.
-** [[https://github.com/afewmail/afew][afew]]
-:PROPERTIES:
-:header-args+: :tangle ~/.config/afew/config
-:END:
-
-#+begin_quote
-an initial tagging script for notmuch mail
-#+end_quote
-
-#+begin_src conf
-# This is the default filter chain
-[SpamFilter]
-#[ClassifyingFilter]
-[KillThreadsFilter]
-#[ListMailsFilter]
-[ArchiveSentMailsFilter]
-sent_tag = sent
-[InboxFilter]
-
-#[Filter.1]
-#query = 'folder:amin/lists/.haskell-cafe'
-#tags = +lists;+lists/haskell-cafe
-#message = lists/haskell-cafe
-
-#[Filter.2]
-#query = 'folder:amin/lists/.haskell-weekly'
-#tags = +lists;+lists/haskell-weekly
-#message = lists/haskell-weekly
-
-#[Filter.3]
-#query = 'folder:amin/lists/.hackernewsletter'
-#tags = +lists;+lists/hackernewsletter
-#message = lists/hackernewsletter
-
-
-#[FolderNameFilter]
-#folder_blacklist = Inbox
-#maildir_separator = /.
-#folder_transforms = Drafts:draft Junk:spam Trash:deleted Sent:sent Archive:archive lists/haskell-cafe:lists/haskell-cafe
-#+end_src
-
** bspwm
*** bspwmrc
:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
:END:
-#+begin_src sh
+#+begin_src sh :tangle no
sxhkd &
sh ~/.fehbg &
xfce4-panel -d &
-#compton &
+compton &
sleep 0.5 && pasystray --notify=all &
bspc monitor -d I II III IV V VI VII VIII IX X
bspc config click_to_focus button1
bspc config directional_focus_tightness low
-bspc rule -a Firefox desktop='^1' follow=on
+#bspc rule -a Firefox desktop='^1' follow=on
bspc rule -a Nightly desktop='^1' follow=on
bspc rule -a Emacs desktop='^2' state=tiled follow=on
#bspc rule -a Chromium desktop='^4' follow=on
:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
:END:
-#+begin_src conf
+#+begin_src conf :tangle no
#
# wm independent hotkeys
#
XF86AudioMute
pamixer --toggle-mute
+XF86AudioMicMute
+ pactl set-source-mute 1 toggle
+
# playback control
XF86Audio{Play,Prev,Next}
mpc {toggle,prev,next}
#XF86KbdBrightness{Up,Down}
# kbdlight {up,down}
+XF86RotateWindows
+ toggle-tablet
+
#
# bspwm hotkeys
#
:header-args+: :tangle ~/.config/compton.conf
:END:
-#+begin_src conf
+#+begin_src conf :tangle no
# Shadow
shadow = false; # Enabled client-side shadows on windows.
no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
** Fontconfig
:PROPERTIES:
-:header-args+: :tangle ~/.config/fontconfig/fonts.conf
+:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
:END:
#+begin_src xml
</fontconfig>
#+end_src
+** getmail
+
+*** getmailrc
+:PROPERTIES:
+:header-args+: :tangle ~/.getmail/getmailrc
+:END:
+
+#+begin_src conf
+[retriever]
+type = SimplePOP3SSLRetriever
+server = fencepost.gnu.org
+username = aminb
+password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
+port = 995
+use_apop = True
+
+[destination]
+type = Maildir
+path = ~/mail/gnu/Inbox/
+
+[options]
+delete = True
+#+end_src
+
+*** getmail.service
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/getmail.service
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=getmail service
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/getmail
+StandardOutput=syslog
+StandardError=syslog
+#+end_src
+
+*** getmail.timer
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/getmail.timer
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=getmail timer
+
+[Timer]
+OnCalendar=*:0/30
+Persistent=true
+Unit=getmail.service
+
+[Install]
+WantedBy=timers.target
+#+end_src
+
** Git
*** gitconfig
#+begin_src conf
[user]
name = Amin Bandali
- email = amin@aminb.org
- # signingkey = 4E05246AB0BF7FFB
+ email = amin@gnu.org
+ signingkey = CDDE75F903538E71813CDA27D1FBA36627D65876
#+end_src
**** signing
#+begin_src conf
-# [commit]
-# gpgsign = true
+[commit]
+ gpgsign = true
# [format]
# signoff = true
#+end_src
pr = pull --rebase
ps = push
psf = push --force
+ nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
+ nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
#+end_src
**** color
user = aminb
#+end_src
+**** send-email
+#+begin_src conf
+[sendemail]
+ smtpuser = aminb
+ smtpserver = fencepost.gnu.org
+ smtpserverport = 587
+ smtpencryption = tls
+ annotate = yes
+#+end_src
+
*** gitignore
:PROPERTIES:
:header-args+: :tangle ~/.gitignore_global
*-autoloads.el
#+end_src
-** Latexmk
-:PROPERTIES:
-:header-args+: :tangle ~/.latexmkrc
-:END:
-
-#+begin_src conf
-$pdf_previewer = "start zathura %O %S";
-$clean_ext = "aux out";
-
-# $pdf_update_method = 4;
-# $pdf_update_command = "zathura %O %S";
-
-# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
-# by Ctrl+click in the PDF.
-# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
-# editor.
-# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
-#+end_src
-
-** getmail
-
-*** getmailrc
-:PROPERTIES:
-:header-args+: :tangle ~/.getmail/getmailrc
-:END:
-
-#+begin_src conf
-[retriever]
-type = SimplePOP3SSLRetriever
-server = fencepost.gnu.org
-username = aminb
-password_command = ("gpg2", "--no-tty", "-q", "-d", "~/.passwd/gnu.gpg")
-port = 995
-use_apop = True
-
-[destination]
-type = Maildir
-path = ~/mail/gnu/Inbox/
-
-[options]
-delete = True
-#+end_src
-
-*** getmail.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/getmail
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** getmail.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail timer
-
-[Timer]
-OnCalendar=*:0/30
-Persistent=true
-Unit=getmail.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
** GnuPG
:PROPERTIES:
:header-args+: :tangle ~/.gnupg/gpg-agent.conf
# gtk-key-theme-name = Emacs
#+end_src
+** [[https://github.com/Leinnan/i3gs][i3gs]]
+:PROPERTIES:
+:header-args+: :tangle ~/.config/i3gs/config
+:END:
+
+#+begin_src conf :comments none :tangle no
+borders_width=0 0 2 0
+separator_width=10
+
+#[mpd]
+#preset=MPD
+#title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
+#borders_color=#7FDBFF
+
+[ram]
+preset=RAM
+title=<span weight='heavy' fgcolor='#3D9970'> </span>
+borders_color=#3D9970
+
+#[cpu]
+#preset=CPU
+#title=<span weight='heavy' fgcolor='#2ECC40'> </span>
+#borders_color=#2ECC40
+
+#[hdd]
+#preset=HDD
+#title=<span weight='heavy' fgcolor='#01FF70'> </span>
+#borders_color=#01FF70
+
+[volume]
+command=volume-info
+title=<span weight='heavy' fgcolor='#7FDBFF'></span>
+borders_color=#7FDBFF
+
+[battery]
+preset=BAT
+command=battery-percentage-time
+title=<span weight='heavy' fgcolor='#39CCCC'> </span>
+borders_color=#39CCCC
+
+[wifi]
+preset=WIFI
+title=<span weight='heavy' fgcolor='#01FF70'> </span>
+borders_color=#01FF70
+
+[date]
+preset=DATE
+command=date '+%-I:%M, %a %b %d '
+title=<span weight='heavy' fgcolor='#FFDC00'> </span>
+borders_color=#FFDC00
+separator_width=0
+#+end_src
+
+** i3status
+:PROPERTIES:
+:header-args+: :tangle ~/.config/i3status/config
+:END:
+
+#+begin_src conf :comments none
+# i3status configuration file.
+# see "man i3status" for documentation.
+
+# It is important that this file is edited as UTF-8.
+# The following line should contain a sharp s:
+# ß
+# If the above line is not correctly displayed, fix your editor first!
+
+general {
+ colors = true
+ interval = 5
+}
+
+order += "ipv6"
+order += "disk /"
+order += "wireless _first_"
+order += "ethernet _first_"
+order += "battery all"
+order += "load"
+order += "tztime local"
+
+wireless _first_ {
+ format_up = "W: (%quality at %essid) %ip"
+ format_down = "W: down"
+}
+
+ethernet _first_ {
+ # if you use %speed, i3status requires root privileges
+ format_up = "E: %ip (%speed)"
+ format_down = "E: down"
+}
+
+battery all {
+ format = "%status %percentage %remaining"
+}
+
+tztime local {
+ format = "%Y-%m-%d %H:%M:%S"
+}
+
+load {
+ format = "%1min"
+}
+
+disk "/" {
+ format = "%avail"
+}
+#+end_src
+
** isync
*** mbsyncrc
WantedBy=timers.target
#+end_src
+** Latexmk
+:PROPERTIES:
+:header-args+: :tangle ~/.latexmkrc
+:END:
+
+#+begin_src conf
+$pdf_previewer = "start zathura %O %S";
+$clean_ext = "aux out";
+
+# $pdf_update_method = 4;
+# $pdf_update_command = "zathura %O %S";
+
+# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
+# by Ctrl+click in the PDF.
+# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
+# editor.
+# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
+#+end_src
+
+** libinput
+
+Improve XPS 15 9560's touchpad experience.
+
+# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
+#+begin_src conf :tangle no
+Section "InputClass"
+ Identifier "libinput touchpad catchall"
+ Driver "libinput"
+ MatchIsTouchpad "on"
+ Option "ClickMethod" "clickfinger"
+ Option "NaturalScrolling" "true"
+ Option "Tapping" "on"
+ Option "TappingButtonMap" "lrm"
+EndSection
+#+end_src
+
** mpd
:PROPERTIES:
:header-args+: :tangle ~/.config/mpd/mpd.conf
# aminb
account aminb
host nix.aminb.org
-tls_fingerprint BB:98:B3:02:83:B0:E0:C3:49:3E:C2:B2:A8:60:62:78:03:B3:5D:B3:BD:B8:0A:39:BB:E4:B0:66:D1:CF:D1:6B
+# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
+tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
tls_starttls on
from amin@aminb.org
user amin@aminb.org
# gnu
account gnu
host fencepost.gnu.org
-tls_fingerprint 94:0E:37:EB:EA:44:5A:4B:B6:6F:16:3D:6C:7E:7E:44:2D:93:61:C1:FE:82:A8:29:5E:3C:12:4E:2D:BE:0E:2C
+# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
+tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
tls_starttls on
from aminb@gnu.org
user aminb
passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
+# gnu (amin)
+account gnu-amin : gnu
+from amin@gnu.org
+
+# gnu (mab)
+account gnu-mab : gnu
+from mab@gnu.org
+
# uwaterloo
account uwaterloo
host connect.uwaterloo.ca
passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
tls_trust_file /etc/ssl/certs/ca-certificates.crt
-# uwaterloo (friendly address)
-account uwaterloo-friendly : uwaterloo
-from amin.bandali@uwaterloo.ca
-
# Set a default account
account default : aminb
#+end_src
[user]
name=Amin Bandali
primary_email=amin@aminb.org
-other_email=amin.bandali@uwaterloo.ca;mbandali@uwaterloo.ca;aminb@gnu.org;
+other_email=amin@gnu.org;abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
# Configuration for "notmuch new"
#
[new]
tags=new;
#tags=unread;inbox;
-ignore=.uidvalidity;.mbsyncstate
+ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
# Search configuration
#
gpg_path=gpg
#+end_src
+*** pre-new hook
+:PROPERTIES:
+:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh
+touch /tmp/gnusieve.log
+sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
+ -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
+#+end_src
+
*** post-new hook
:PROPERTIES:
:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
:END:
#+begin_src sh
-afew -tn
+# apply sent tag to messages sent by me
+notmuch tag -new +sent -- from:amin@aminb.org or from:amin@gnu.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
+
+# initial tagging
+notmuch tag -latest -- tag:latest
+notmuch tag +inbox +unread +latest -new -- tag:new
+
# apply tags to lists
-notmuch tag +lists +lists/deepspec -- folder:amin/lists/deepspec
-notmuch tag +lists +lists/haskell-cafe -- folder:amin/lists/haskell-cafe
-notmuch tag +lists +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
-notmuch tag +lists +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
-notmuch tag +lists +lists/notmuch -- folder:amin/lists/notmuch
-notmuch tag +lists +lists/info-gnu-emacs -- folder:amin/lists/info-gnu-emacs
-notmuch tag +lists +lists/help-gnu-emacs -- folder:amin/lists/help-gnu-emacs
-notmuch tag +lists +lists/emacs-devel -- folder:amin/lists/emacs-devel
+
+# <aminb>
+notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
+notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
+
+notmuch tag -inbox +pay -- folder:amin/pay
+notmuch tag -inbox +banking -- folder:amin/banking
+# </aminb>
+
+# <uw>
+notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
+notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
+
+notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
+notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
+notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
+notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
+notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
+# </uw>
+
+# <gnu>
+notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
+notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
+notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
+notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
+notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
+notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
+notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
+notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
+notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
+notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
+notmuch tag -inbox +webmasters -- folder:gnu/webmasters
+
+notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
+notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
+notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
+notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
+
+notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
+notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
+notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
+notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
+notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
+# </gnu>
+
+notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
+notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
#+end_src
*** notmuch.service
prime_gpg_agent()
#+end_src
+** pigeonhole
+*** gnu.sieve
+:PROPERTIES:
+:header-args+: :tangle ~/sieve/gnu.sieve :comments none
+:END:
+
+#+begin_src conf
+require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
+
+if anyof (
+ address :is "from" "webmasters@gnu.org",
+ address :is "from" "webmasters-comment@gnu.org") {
+ fileinto :create "webmasters";
+ stop;
+}
+
+include :personal "lists";
+#+end_src
+
+*** lists.sieve
+:PROPERTIES:
+:header-args+: :tangle ~/sieve/lists.sieve :comments none
+:END:
+
+#+begin_src conf
+require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
+ "include" ];
+
+if anyof (
+ header :contains "list-id" "<emacs-devel.gnu.org>",
+ header :contains "list-id" "<emacs-orgmode.gnu.org>",
+ header :contains "list-id" "<emacsconf-discuss.gnu.org>",
+ header :contains "list-id" "<fencepost-users.gnu.org>",
+ header :contains "list-id" "<guix-devel.gnu.org>",
+ header :contains "list-id" "<guile-devel.gnu.org>",
+ header :contains "list-id" "<help-gnu-emacs.gnu.org>",
+ header :contains "list-id" "<info-gnu-emacs.gnu.org>",
+ header :contains "list-id" "<www-commits.gnu.org>",
+ header :contains "list-id" "<www-discuss.gnu.org>",
+ header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
+ header :contains "list-id" "<haskell-cafe.haskell.org>",
+ header :contains "list-id" "<haskell-art.we.lurk.org>",
+ header :contains "list-id" "<notmuch.notmuchmail.org>") {
+ if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
+ set :lower "listname" "${1}";
+ fileinto :create "l/${listname}";
+ }
+}
+
+if anyof (
+ header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
+ if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
+ set :lower "username" "${1}";
+ set :lower "listname" "${2}";
+ fileinto :create "l/${username}/${listname}";
+ }
+}
+#+end_src
+
** polybar
*** config
*** polybar-launch
:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/polybar-launch
+:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
:END:
-#+begin_src sh :shebang "#!/bin/sh" :tangle no
+#+begin_src sh :tangle no
# Terminate already running bar instances
killall -q polybar
echo "Bars launched..."
#+end_src
+** PowerTOP
+:PROPERTIES:
+:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
+:END:
+
+#+begin_src conf
+[Unit]
+Description=Powertop tunings
+
+[Service]
+ExecStart=/usr/bin/powertop --auto-tune
+RemainAfterExit=true
+
+[Install]
+WantedBy=multi-user.target
+#+end_src
+
** ranger
*** rc.conf
*** scope.sh
:PROPERTIES:
-:header-args+: :tangle ~/.config/ranger/scope.sh
+:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
:END:
-#+begin_src sh :shebang "#!/bin/sh" :tangle no
+#+begin_src sh :tangle no
# ranger supports enhanced previews. If the option "use_preview_script"
# is set to True and this file exists, this script will be called and its
# output is displayed in ranger. ANSI color codes are supported.
** redshift
:PROPERTIES:
-:header-args+: :tangle ~/.config/redshift.conf
+:header-args+: :tangle ~/.config/redshift.conf :comments none
:END:
#+begin_src conf
# rofi command. Make sure to have "$@" as last argument
_rofi () {
#rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
- rofi -i -no-auto-select "$@"
+ rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
}
# xdotool needs the keyboard layout to be set using setxkbmap
insert_pass="Alt+n"
#+end_src
-* Scripts
-
-This section contains various useful scripts and the ones used by the
-programs above. For instance, =toggle-tablet= for switching to and
-from tablet mode on my X220T, =toggle-presentation-mode= for toggling
-Xfce's presentation mode which keeps the screen awake, and
-=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
-exact brightness value.
-
-** rofi-light
+** sway
:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
+:header-args+: :tangle ~/.config/sway/config
+:END:
+
+#+begin_src conf
+exec xrdb .Xresources
+exec dunst
+### Variables
+# super
+set $mod Mod4
+# alt
+set $mod2 Mod1
+set $left h
+set $down j
+set $up k
+set $right l
+set $term urxvt
+set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
+
+### Output configuration
+#
+# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
+output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
+#
+# Example configuration:
+#
+# output HDMI-A-1 resolution 1920x1080 position 1920,0
+#
+# You can get the names of your outputs by running: swaymsg -t get_outputs
+
+### Idle configuration
+#
+# Example configuration:
+#
+#exec swayidle \
+# timeout 300 'swaylock -c 000000' \
+# timeout 600 'swaymsg "output * dpms off"' \
+# resume 'swaymsg "output * dpms on"' \
+# before-sleep 'swaylock -c 000000'
+#
+# This will lock your screen after 300 seconds of inactivity, then turn off
+# your displays after another 600 seconds, and turn your screens back on when
+# resumed. It will also lock your screen before your computer goes to sleep.
+
+### Input configuration
+
+input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
+ dwt enabled
+ tap enabled
+ natural_scroll enabled
+ middle_emulation enabled
+ click_method clickfinger
+}
+
+input "1:1:AT_Translated_Set_2_keyboard" {
+ repeat_delay 200
+ repeat_rate 45
+ xkb_layout us,ir
+ xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
+}
+
+
+### Key bindings
+#
+# Basics:
+#
+ # start a terminal
+ bindsym $mod+Return exec $term
+
+ # kill focused window
+ bindsym $mod+Shift+q kill
+
+ # start your launcher
+ bindsym $mod+d exec $menu
+
+ # Drag floating windows by holding down $mod and left mouse button.
+ # Resize them with right mouse button + $mod.
+ # Despite the name, also works for non-floating windows.
+ # Change normal to inverse to use left mouse button for resizing and right
+ # mouse button for dragging.
+ floating_modifier $mod normal
+
+ # reload the configuration file
+ bindsym $mod+Shift+c reload
+
+ # exit sway (logs you out of your wayland session)
+ bindsym $mod+Shift+e exit
+
+ bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
+ bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
+ bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
+
+ bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
+ bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
+ bindsym XF86AudioMute exec pamixer --toggle-mute
+ bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
+
+ # original sway workspace switch and window move
+ bindsym $mod+bracketleft workspace prev
+ bindsym $mod+bracketright workspace next
+ bindsym $mod+braceleft move container to workspace prev
+ bindsym $mod+braceright move container to workspace next
+
+ # bspwm-esque workspace switch and window move
+ bindsym $mod2+bracketleft exec sway-ws-util switch prev
+ bindsym $mod2+bracketright exec sway-ws-util switch next
+ bindsym $mod2+braceleft exec sway-ws-util move prev follow
+ bindsym $mod2+braceright exec sway-ws-util move next follow
+#
+# Moving around:
+#
+ # Move your focus around
+ bindsym $mod+$left focus left
+ bindsym $mod+$down focus down
+ bindsym $mod+$up focus up
+ bindsym $mod+$right focus right
+ # or use $mod+[up|down|left|right]
+ bindsym $mod+Left focus left
+ bindsym $mod+Down focus down
+ bindsym $mod+Up focus up
+ bindsym $mod+Right focus right
+
+ # _move_ the focused window with the same, but add Shift
+ bindsym $mod+Shift+$left move left
+ bindsym $mod+Shift+$down move down
+ bindsym $mod+Shift+$up move up
+ bindsym $mod+Shift+$right move right
+ # ditto, with arrow keys
+ bindsym $mod+Shift+Left move left
+ bindsym $mod+Shift+Down move down
+ bindsym $mod+Shift+Up move up
+ bindsym $mod+Shift+Right move right
+#
+# Workspaces:
+#
+ # switch to workspace
+ bindsym $mod+1 workspace 1
+ bindsym $mod+2 workspace 2
+ bindsym $mod+3 workspace 3
+ bindsym $mod+4 workspace 4
+ bindsym $mod+5 workspace 5
+ bindsym $mod+6 workspace 6
+ bindsym $mod+7 workspace 7
+ bindsym $mod+8 workspace 8
+ bindsym $mod+9 workspace 9
+ bindsym $mod+0 workspace 10
+ # move focused container to workspace
+ bindsym $mod+Shift+1 move container to workspace 1
+ bindsym $mod+Shift+2 move container to workspace 2
+ bindsym $mod+Shift+3 move container to workspace 3
+ bindsym $mod+Shift+4 move container to workspace 4
+ bindsym $mod+Shift+5 move container to workspace 5
+ bindsym $mod+Shift+6 move container to workspace 6
+ bindsym $mod+Shift+7 move container to workspace 7
+ bindsym $mod+Shift+8 move container to workspace 8
+ bindsym $mod+Shift+9 move container to workspace 9
+ bindsym $mod+Shift+0 move container to workspace 10
+ # Note: workspaces can have any name you want, not just numbers.
+ # We just use 1-10 as the default.
+#
+# Layout stuff:
+#
+ # You can "split" the current object of your focus with
+ # $mod+b or $mod+v, for horizontal and vertical splits
+ # respectively.
+ bindsym $mod+b splith
+ bindsym $mod+v splitv
+
+ # Switch the current container between different layout styles
+ bindsym $mod+s layout stacking
+ bindsym $mod+w layout tabbed
+ bindsym $mod+e layout toggle split
+
+ # Make the current focus fullscreen
+ bindsym $mod+f fullscreen
+
+ # Toggle the current focus between tiling and floating mode
+ bindsym $mod+Shift+space floating toggle
+
+ # Swap focus between the tiling area and the floating area
+ bindsym $mod+space focus mode_toggle
+
+ # move focus to the parent container
+ bindsym $mod+a focus parent
+#
+# Scratchpad:
+#
+ # Sway has a "scratchpad", which is a bag of holding for windows.
+ # You can send windows there and get them back later.
+
+ # Move the currently focused window to the scratchpad
+ bindsym $mod+Shift+minus move scratchpad
+
+ # Show the next scratchpad window or hide the focused scratchpad window.
+ # If there are multiple scratchpad windows, this command cycles through them.
+ bindsym $mod+minus scratchpad show
+#
+# Resizing containers:
+#
+mode "resize" {
+ # left will shrink the containers width
+ # right will grow the containers width
+ # up will shrink the containers height
+ # down will grow the containers height
+ bindsym $left resize shrink width 10px
+ bindsym $down resize grow height 10px
+ bindsym $up resize shrink height 10px
+ bindsym $right resize grow width 10px
+
+ # ditto, with arrow keys
+ bindsym Left resize shrink width 10px
+ bindsym Down resize grow height 10px
+ bindsym Up resize shrink height 10px
+ bindsym Right resize grow width 10px
+
+ # return to default mode
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+}
+bindsym $mod+Shift+r mode "resize"
+
+#
+# Status Bar:
+#
+# Read `man 5 sway-bar` for more information about this section.
+bar {
+ position bottom
+ colors {
+ statusline #ffffff
+ background #323232
+ inactive_workspace #32323200 #32323200 #5c5c5c
+ }
+ status_command i3status
+}
+
+include /etc/sway/config.d/*
+#+end_src
+
+** TLP
+
+*** TODO enigma
+*** plasma
+
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power saving
+# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
+
+# Hint: some features are disabled by default, remove the leading # to enable
+# them.
+
+# Set to 0 to disable, 1 to enable TLP.
+TLP_ENABLE=1
+
+# Operation mode when no power supply can be detected: AC, BAT.
+# Concerns some desktop and embedded hardware only.
+TLP_DEFAULT_MODE=AC
+
+# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
+# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
+TLP_PERSISTENT_DEFAULT=0
+
+# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Hint: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel default values are used.
+
+# Select a CPU frequency scaling governor.
+# Intel Core i processor with intel_pstate driver:
+# powersave(*), performance.
+# Older hardware with acpi-cpufreq driver:
+# ondemand(*), powersave, performance, conservative, schedutil.
+# (*) is recommended.
+# Hint: use tlp-stat -p to show the active driver and available governors.
+# Important:
+# powersave for intel_pstate and ondemand for acpi-cpufreq are power
+# efficient for *almost all* workloads and therefore kernel and most
+# distributions have chosen them as defaults. If you still want to change,
+# you should know what you're doing! You *must* disable your distribution's
+# governor settings or conflicts will occur.
+#CPU_SCALING_GOVERNOR_ON_AC=powersave
+#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your CPU. For available frequencies see
+# the output of tlp-stat -p.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set energy performance hints (HWP) for Intel P-state governor:
+# performance, balance_performance, default, balance_power, power
+# Values are given in order of increasing power saving.
+# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
+CPU_HWP_ON_AC=balance_performance
+CPU_HWP_ON_BAT=balance_power
+
+# Set Intel P-state performance: 0..100 (%).
+# Limit the max/min P-state to control the power dissipation of the CPU.
+# Values are stated as a percentage of the available performance.
+# Requires an Intel Core i processor with intel_pstate driver.
+#CPU_MIN_PERF_ON_AC=0
+#CPU_MAX_PERF_ON_AC=100
+#CPU_MIN_PERF_ON_BAT=0
+#CPU_MAX_PERF_ON_BAT=30
+
+# Set the CPU "turbo boost" feature: 0=disable, 1=allow
+# Requires an Intel Core i processor.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used CPU cores/hyper-threads under light load conditions:
+# 0=disable, 1=enable.
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog:
+# 0=disable (default, saves power), 1=enable (for kernel debugging only).
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
+# Frequency voltage pairs are written to:
+# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Set CPU performance versus energy savings policy:
+# performance, balance-performance, default, balance-power, power.
+# Values are given in order of increasing power saving.
+# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
+ENERGY_PERF_POLICY_ON_AC=performance
+ENERGY_PERF_POLICY_ON_BAT=balance-power
+
+# Disk devices; separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk ID also (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Disk advanced power management level: 1..254, 255 (max saving, min, off).
+# Levels 1..127 may spin down the disk; 255 allowable on most drives.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="128 128"
+
+# Hard disk spin down timeout:
+# 0: spin down disabled
+# 1..240: timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# See 'man hdparm' for details.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the kernel default scheduler for the particular disk.
+#DISK_IOSCHED="cfq cfq"
+
+# AHCI link power management (ALPM) for disk devices:
+# min_power, med_power_with_dipm(*), medium_power, max_performance.
+# (*) Kernel >= 4.15 required, then recommended.
+# Multiple values separated with spaces are tried sequentially until success.
+SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
+SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
+
+# Exclude host devices from AHCI link power management.
+# Separate multiple hosts with spaces.
+#SATA_LINKPWR_BLACKLIST="host1"
+
+# Runtime Power Management for AHCI host and disks devices:
+# on=disable, auto=enable.
+# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+#AHCI_RUNTIME_PM_ON_AC=on
+#AHCI_RUNTIME_PM_ON_BAT=on
+
+# Seconds of inactivity before disk is suspended.
+AHCI_RUNTIME_PM_TIMEOUT=15
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default, performance, powersave.
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
+# auto = mid on BAT, high on AC; default = use hardware defaults.
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# Radeon dynamic power management method (DPM): battery, performance.
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# Radeon DPM performance level: auto, low, high; auto is recommended.
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
+WIFI_PWR_ON_AC=off
+WIFI_PWR_ON_BAT=on
+
+# Disable wake on LAN: Y/N.
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables, >=1 enables power saving (recommended: 1).
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=0
+
+# Disable controller too (HDA only): Y/N.
+SOUND_POWER_SAVE_CONTROLLER=N
+
+# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
+# Drive can be powered on again by releasing (and reinserting) the eject lever
+# or by pressing the disc eject button on newer models.
+# Note: an UltraBay/MediaBay hard disk is never powered off.
+BAY_POWEROFF_ON_AC=0
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0).
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Exclude PCI(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+RUNTIME_PM_BLACKLIST="01:00.0"
+
+# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
+# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
+# prevents accidential power-on of dGPU in hybrid graphics setups.
+# Use "" to disable the feature completely.
+# Separate multiple drivers with spaces.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
+
+# Set to 0 to disable, 1 to enable USB autosuspend feature.
+USB_AUTOSUSPEND=1
+
+# Exclude listed devices from USB autosuspend (separate with spaces).
+# Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# Bluetooth devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_BTUSB=0
+
+# Phone devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude (enable charging).
+USB_BLACKLIST_PHONE=0
+
+# Printers are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_PRINTER=1
+
+# WWAN devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_WWAN=1
+
+# Include listed devices into USB autosuspend even if already excluded
+# by the blacklists above (separate with spaces).
+# Use lsusb to get the ids.
+#USB_WHITELIST="1111:2222 3333:4444"
+
+# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
+# (workaround for USB devices that cause shutdown problems).
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
+
+# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
+# on system startup: 0=disable, 1=enable.
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+# are ignored when this is enabled!
+#RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=1
+
+# Radio devices to disable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+
+# Radio devices to enable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
+
+# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
+# (workaround for devices that are blocking shutdown).
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
+
+# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
+# (to prevent other operating systems from missing radios).
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
+
+# Radio devices to enable on AC: bluetooth, wifi, wwan.
+#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
+
+# Radio devices to disable on battery: bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
+
+# Radio devices to disable on battery when not in use (not connected):
+# bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
+
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
+# required). Charging starts when the remaining capacity falls below the
+# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
+# Main / Internal battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay / Slice / Replaceable battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
+
+# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
+#RESTORE_THRESHOLDS_ON_BAT=1
+
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth, wifi, wwan.
+
+# Hints:
+# - Parameters are disabled by default, remove the leading # to enable them
+# - Separate multiple radio devices with spaces
+
+# Radio devices to disable on connect.
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
+
+# Radio devices to enable on disconnect.
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
+
+# Radio devices to enable/disable when docked.
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked.
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+#+end_src
+
+** X
+
+*** xprofile
+:PROPERTIES:
+:header-args+: :tangle ~/.xprofile
+:END:
+
+=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
+contrary, it's automatically sourced by LightDM, my display manager of
+choice.
+
+#+begin_src sh :tangle no
+xset -b # disable bell
+xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
+
+# setxkbmap -option compose:ralt
+
+setxkbmap -option ctrl:nocaps # turn capslock into control
+setxkbmap -option altwin:swap_alt_win # swap alt and super
+
+if [ $(hostname) = "plasma" ]
+then
+ setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
+fi
+
+if [ $(hostname) = "enigma" ]
+then
+ xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
+fi
+
+light -Scrs "intel_backlight" 2
+
+source $HOME/.zprofile
+
+export _JAVA_AWT_WM_NONREPARENTING=1
+export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
+
+if [ $(hostname) = "plasma" ]
+then
+ unlock-def-gk.py &
+fi
+
+bspwm &
+#+end_src
+
+*** X resources
+
+**** Xresources
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
+:END:
+
+#+begin_src conf-xdefaults
+#include ".Xresources.d/fonts"
+! #include ".Xresources.d/colors"
+#include ".Xresources.d/emacs"
+#include ".Xresources.d/rxvt-unicode"
+#+end_src
+
+**** Xresources.d
+
+***** fonts
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
+:END:
+
+#+begin_src conf-xdefaults
+Xft.lcdfilter: lcddefault
+Xft.antialias: true
+Xft.autohint: 0
+Xft.hinting: true
+Xft.hintstyle: hintslight
+! Xft.hintstyle: hintfull
+Xft.rgba: rgb
+Xft.dpi: 96
+#+end_src
+
+***** colors
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
+:END:
+
+#+begin_src conf-xdefaults :tangle no
+#include "gruvbox-light.xresources"
+! #include "gruvbox-dark.xresources"
+#include "gruvbox-urxvt256.xresources"
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-light.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 6 Sep 2014
+! -----------------------------------------------------------------------------
+
+! hard contrast: *background: #f9f5d7
+*background: #fbf1c7
+! soft contrast: *background: #f2e5bc
+*foreground: #3c3836
+! Black + DarkGrey
+*color0: #fdf4c1
+*color8: #928374
+! DarkRed + Red
+*color1: #cc241d
+*color9: #9d0006
+! DarkGreen + Green
+*color2: #98971a
+*color10: #79740e
+! DarkYellow + Yellow
+*color3: #d79921
+*color11: #b57614
+! DarkBlue + Blue
+*color4: #458588
+*color12: #076678
+! DarkMagenta + Magenta
+*color5: #b16286
+*color13: #8f3f71
+! DarkCyan + Cyan
+*color6: #689d6a
+*color14: #427b58
+! LightGrey + White
+*color7: #7c6f64
+*color15: #3c3836
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-dark.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 6 Sep 2014
+! -----------------------------------------------------------------------------
+
+! hard contrast: *background: #1d2021
+*background: #282828
+! soft contrast: *background: #32302f
+*foreground: #ebdbb2
+! Black + DarkGrey
+*color0: #282828
+*color8: #928374
+! DarkRed + Red
+*color1: #cc241d
+*color9: #fb4934
+! DarkGreen + Green
+*color2: #98971a
+*color10: #b8bb26
+! DarkYellow + Yellow
+*color3: #d79921
+*color11: #fabd2f
+! DarkBlue + Blue
+*color4: #458588
+*color12: #83a598
+! DarkMagenta + Magenta
+*color5: #b16286
+*color13: #d3869b
+! DarkCyan + Cyan
+*color6: #689d6a
+*color14: #8ec07c
+! LightGrey + White
+*color7: #a89984
+*color15: #ebdbb2
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-urxvt256.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 13 Dec 2013
+! -----------------------------------------------------------------------------
+
+URxvt.color24: #076678
+URxvt.color66: #427b58
+URxvt.color88: #9d0006
+URxvt.color96: #8f3f71
+URxvt.color100: #79740e
+URxvt.color108: #8ec07c
+URxvt.color109: #83a598
+URxvt.color130: #af3a03
+URxvt.color136: #b57614
+URxvt.color142: #b8bb26
+URxvt.color167: #fb4934
+URxvt.color175: #d3869b
+URxvt.color208: #fe8019
+URxvt.color214: #fabd2f
+URxvt.color223: #ebdbb2
+URxvt.color228: #f2e5bc
+URxvt.color229: #fbf1c7
+URxvt.color230: #f9f5d7
+URxvt.color234: #1d2021
+URxvt.color235: #282828
+URxvt.color236: #32302f
+URxvt.color237: #3c3836
+URxvt.color239: #504945
+URxvt.color241: #665c54
+URxvt.color243: #7c6f64
+URxvt.color244: #928374
+URxvt.color245: #928374
+URxvt.color246: #a89984
+URxvt.color248: #bdae93
+URxvt.color250: #d5c4a1
+#+end_src
+
+***** emacs
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
+:END:
+
+#+begin_src conf-xdefaults
+Emacs.menuBar: off
+Emacs.toolBar: off
+Emacs.verticalScrollBars: off
+Emacs.cursorBlink: off
+Emacs.FontBackend: xft,x
+! Emacs.font: Ubuntu Mono-12
+! Emacs.font: Triplicate T4C-11
+! Emacs.font: Ubuntu Mono-10.5
+! Emacs.font: Ubuntu Mono-12
+! Emacs.font: Iosevka-11
+
+! Emacs.font: Fira Mono:size=15
+! Emacs.font: DejaVu Sans Mono:size=15
+! Emacs.font: Inconsolata:size=17
+! Emacs.font: Inconsolata:size=16
+! Emacs.font: Inconsolata LGC:size=14
+! Emacs.font: Source Code Pro Medium-10.5
+Emacs.font: Ubuntu Mono:size=16
+! Emacs.font: Iosevka:size=16
+#+end_src
+
+***** rxvt-unicode
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
+:END:
+
+#+begin_src conf-xdefaults
+! Font
+URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
+URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
+URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
+URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
+
+URxvt.xftAntialias: true
+URxvt.letterSpace: 0
+
+URxvt.depth: 0
+URxvt.loginShell: true
+URxvt.saveLines: 100000
+URxvt.internalBorder: 3
+URxvt.lineSpace: 0
+URxvt.scrollBar: false
+URxvt.scrollStyle: rxvt
+URxvt*scrollTtyOutput: false
+URxvt*scrollWithBuffer: true
+URxvt*scrollTtyKeypress: true
+URxvt.keysym.Shift-Up: command:\033]720;1\007
+URxvt.keysym.Shift-Down: command:\033]721;1\007
+
+URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
+URxvt.perl-ext: bidi
+URxvt.bidi.enabled: 1
+URxvt.url-select.launcher: firefox
+URxvt.url-select.underline: true
+URxvt.keysym.M-u: perl:url-select:select_next
+URxvt.keysym.M-Escape: perl:keyboard-select:activate
+URxvt.keysym.M-s: perl:keyboard-select:search
+URxvt.url-launcher: /usr/bin/firefox
+URxvt.matcher.button: 1
+URxvt.iso14755: false
+URxvt.iso14755_53: false
+URxvt.keysym.M-c: perl:clipboard:copy
+URxvt.keysym.M-v: perl:clipboard:paste
+URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
+URxvt.keysym.C-Up: font-size:increase
+URxvt.keysym.C-Down: font-size:decrease
+URxvt.keysym.C-S-Up: font-size:incglobal
+URxvt.keysym.C-S-Down: font-size:decglobal
+URxvt.keysym.C-equal: font-size:reset
+!URxvt.keysym.C-question: font-size:show
+
+URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
+
+!urxvt*foreground: white
+!urxvt*background: black
+
+!*color0: #2E3436
+!*color1: #a40000
+!*color2: #4E9A06
+!*color3: #C4A000
+!*color4: #3465A4
+!*color5: #75507B
+!*color6: #ce5c00
+!*color7: #babdb9
+!*color8: #555753
+!*color9: #EF2929
+!*color10: #8AE234
+!*color11: #FCE94F
+!*color12: #729FCF
+!*color13: #AD7FA8
+!*color14: #fcaf3e
+!*color15: #EEEEEC
+
+!URxvt.foreground: #C8C8C8
+!URxvt.background: #FFFFFF
+
+!! black
+!*color0: #2E3436
+!*color8: #555753
+!! red
+!*color1: #a40000
+!*color9: #EF2929
+!! green
+!*color2: #4E9A06
+!*color10: #8AE234
+!! yellow
+!*color3: #C4A000
+!*color11: #FCE94F
+!! blue
+!*color4: #3465A4
+!*color12: #729FCF
+!! purple
+!*color5: #75507B
+!*color13: #AD7FA8
+!! orange (replaces cyan)
+!*color6: #ce5c00
+!*color14: #fcaf3e
+!! white
+!*color7: #babdb9
+!*color15: #EEEEEC
+
+! Tango colour theme for rxvt-unicode
+URxvt.background: #FFFFFF
+URxvt.foreground: #000000
+
+! Black
+URxvt.color0: #2E3436
+URxvt.color8: #757773
+
+! Red
+URxvt.color1: #CC0000
+URxvt.color9: #EF2929
+
+! Green
+URxvt.color2: #4E9A06
+URxvt.color10: #8AE234
+
+! Yellow
+URxvt.color3: #C4A000
+URxvt.color11: #FCE94F
+
+! Blue
+URxvt.color4: #3465A4
+URxvt.color12: #729FCF
+
+! Magenta
+URxvt.color5: #75507B
+URxvt.color13: #AD7FA8
+
+!! Cyan
+!URxvt.color6: #06989A
+!URxvt.color14: #34E2E2
+! orange (replaces cyan)
+*color6: #ce5c00
+*color14: #fcaf3e
+
+! White
+URxvt.color7: #D3D7CF
+URxvt.color15: #EEEEEC
+#+end_src
+
+** XDG
+:PROPERTIES:
+:header-args+: :tangle ~/.config/user-dirs.dirs
+:END:
+
+#+begin_src conf
+XDG_DESKTOP_DIR="$HOME/Desktop"
+XDG_DOCUMENTS_DIR="$HOME/usr/docs"
+XDG_DOWNLOAD_DIR="$HOME/usr/dls"
+XDG_MUSIC_DIR="$HOME/usr/music"
+XDG_PICTURES_DIR="$HOME/usr/pics"
+XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
+XDG_TEMPLATES_DIR="$HOME/usr/Templates"
+XDG_VIDEOS_DIR="$HOME/usr/vids"
+#+end_src
+
+** Zathura
+:PROPERTIES:
+:header-args+: :tangle ~/.config/zathura/zathurarc
+:END:
+
+#+begin_src conf
+set smooth-scroll true
+set selection-clipboard clipboard
+set zoom-step 05
+set default-bg "#272727"
+set statusbar-bg "#272727"
+set inputbar-bg "#373737"
+#+end_src
+
+** Zsh
+
+My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
+[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
+installed.
+
+*** zimrc
+:PROPERTIES:
+:header-args+: :tangle ~/.zimrc
+:END:
+
+#+begin_src sh
+
+
+#################
+# CORE SETTINGS #
+#################
+
+#
+# Zim settings
+#
+
+# Select what modules you would like enabled.
+# The second line of modules may depend on options set by modules in the first
+# line. These dependencies are noted on the respective module's README.md.
+zmodules=(directory environment git git-info history input ssh utility custom \
+ syntax-highlighting history-substring-search prompt completion)
+
+
+###################
+# MODULE SETTINGS #
+###################
+
+#
+# Prompt
+#
+
+# Set your desired prompt here
+zprompt_theme='pure'
+#PURE_PROMPT_SYMBOL=λ
+#PURE_PROMPT_SYMBOL=δ
+PURE_PROMPT_SYMBOL=➜
+
+#
+# Completion
+#
+
+# set an optional host-specific filename for the completion cache file
+# if none is provided, the default '.zcompdump' is used.
+#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
+
+#
+# Utility
+#
+
+# Uncomment to enable command correction prompts
+# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
+setopt CORRECT
+
+#
+# Environment
+#
+
+# Set the string below to the desired terminal title format string.
+# The terminal title is redrawn upon directory change, however, variables like
+# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
+# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
+# The example below uses the following format: 'username@host:/current/directory'
+ztermtitle='%n@%m:%~'
+
+#
+# Input
+#
+
+# Uncomment to enable double-dot expansion.
+# This appends '../' to your input for each '.' you type after an initial '..'
+#zdouble_dot_expand='true'
+
+#
+# Syntax-Highlighting
+#
+
+# This determines what highlighters will be used with the syntax-highlighting module.
+# Documentation of the highlighters can be found here:
+# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
+# For (u)rxvt, termite and gnome-terminal users,
+# removing the 'cursor' highlighter will fix the disappearing cursor problem
+#zhighlighters=(main brackets cursor)
+zhighlighters=(main brackets pattern)
+
+
+#
+# SSH
+#
+
+# Load these ssh identities with the ssh module
+zssh_ids=(id_ed25519_amin)
+
+
+#
+# Pacman
+#
+
+# Set (optional) pacman front-end.
+zpacman_frontend='yay'
+
+# Load any helper scripts as defined here
+#zpacman_helper=(aur)
+#+end_src
+
+*** zlogin
+:PROPERTIES:
+:header-args+: :tangle ~/.zlogin
+:END:
+
+#+begin_src sh
+
+
+#
+# User configuration sourced by login shells
+#
+
+# Initialize zim
+[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
+#+end_src
+
+*** zprofile
+:PROPERTIES:
+:header-args+: :tangle ~/.zprofile
+:END:
+
+#+begin_src sh
+#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
+#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
+export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
+export XDG_CONFIG_HOME=$HOME/.config
+export XDG_DATA_HOME=$HOME/.local/share
+export XDG_DATA_DIRS=/usr/local/share:/usr/share
+export MAILDIR="$HOME/mail"
+export CVS_RSH=ssh
+#export MATHMODELS=$HOME/src/eiffel/mathmodels
+#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
+#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
+
+# Eiffel2Java stuff
+#export JAVA_HOME=/usr/lib/jvm/default
+#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
+#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
+#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
+
+#export PATH="$HOME/usr/build/pvs:$PATH"
+#export SBCLISP_HOME=/usr/share/sbcl-source
+#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
+
+export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
+
+#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
+#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
+
+if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
+#+end_src
+
+*** zshenv
+:PROPERTIES:
+:header-args+: :tangle ~/.zshenv
+:END:
+
+#+begin_src sh
+# Ensure that a non-login, non-interactive shell has a defined environment.
+if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
+ source "${ZDOTDIR:-$HOME}/.zprofile"
+fi
+#+end_src
+
+*** zshrc
+:PROPERTIES:
+:header-args+: :tangle ~/.zshrc
+:END:
+
+#+begin_src sh
+# Bash-like navigation
+#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
+#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
+export WORDCHARS='*?[]~=&;!#$%^(){}<>'
+#ZLE_SPACE_SUFFIX_CHARS=$'|&'
+
+#disable -r time # disable shell reserved word
+#alias time='time -p' # -p for POSIX output
+
+# rehash if last command was pacaur or pacman
+# (so that zsh picks up changes in $PATH immediately)
+TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
+
+#
+# User configuration sourced by interactive shells
+#
+
+# Change default zim location
+export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
+
+# Start zim
+[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
+
+ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
+#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
+
+setopt globdots
+
+source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
+source ~/.zsh/zsh-autopair/autopair.zsh
+
+
+### fzf ###
+
+source /usr/share/fzf/key-bindings.zsh
+source /usr/share/fzf/completion.zsh
+
+# Accept history selection instead of putting it on
+# the command line
+fzf-history-widget-accept() {
+ fzf-history-widget
+ zle accept-line
+}
+#zle -N fzf-history-widget-accept
+#bindkey '^R' fzf-history-widget-accept
+
+# alt+c preview
+export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
+
+### fzf ###
+
+
+# aliases
+alias mpv="mpv --ytdl-format mp4"
+alias mv="mv -iv"
+alias cp="cp -iv"
+alias scl=systemctl
+alias jcl=journalctl
+alias m="mbsync -Va; getmail; notmuch new"
+alias best="youtube-dl -f best"
+alias nixx="ssh amin@nix.aminb.org"
+alias fence="ssh aminb@fencepost.gnu.org"
+
+aur() {
+ cd ~/usr/build
+ git clone https://aur.archlinux.org/${1}.git
+ cd ${1}
+}
+
+# i-beam cursor
+echo -e "\033[5 q"
+#echo -e "\033[6 q"
+#+end_src
+
+* Scripts
+
+This section contains various useful scripts and the ones used by the
+programs above. For instance, =toggle-tablet= for switching to and
+from tablet mode on my X220T, =toggle-presentation-mode= for toggling
+Xfce's presentation mode which keeps the screen awake, and
+=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
+exact brightness value.
+
+** battery-percentage-time
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh :tangle no
+dbus_send() {
+ label=$1
+ dbus-send --print-reply=literal --system \
+ --dest=org.freedesktop.UPower \
+ /org/freedesktop/UPower/devices/battery_BAT0 \
+ org.freedesktop.DBus.Properties.Get \
+ string:org.freedesktop.UPower.Device \
+ string:"${label}" | awk '{print $3}'
+}
+
+perc=$(dbus_send 'Percentage')
+state=$(dbus_send 'State')
+
+if [ "$state" -eq 2 ]; then # Discharging
+ secs=$(dbus_send 'TimeToEmpty')
+elif [ "$state" -eq 1 ]; then # Charging
+ secs=$(dbus_send 'TimeToFull')
+fi
+
+printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
+#+end_src
+
+** rofi-light
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
:END:
#+begin_src bash
cur=$(light -G)
-val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 8)
+val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
light -S $val
#+end_src
+** s (run sway)
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash
+export _JAVA_AWT_WM_NONREPARENTING=1
+export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
+light -Scrs "intel_backlight" 2
+source $HOME/.zprofile
+sway
+#+end_src
+
+** sway-ws-util
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash
+curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
+[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
+[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
+dest_ws=-1
+op=-1
+
+if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
+ op="$1"
+ if [ "$2" = "prev" ]; then
+ dest_ws="$prev_ws"
+ elif [ "$2" = "next" ]; then
+ dest_ws="$next_ws"
+ else
+ echo "Usage: $0 $1 {prev|next} [follow]"
+ exit 1
+ fi
+else
+ echo "Usage: $0 {switch|move} {prev|next} [follow]"
+ exit 1
+fi
+
+if [ "$op" = "switch" ]; then
+ sway workspace "$dest_ws"
+elif [ "$op" = "move" ]; then
+ sway move container to workspace "$dest_ws"
+ if [ "$3" = "follow" ]; then
+ sway workspace "$dest_ws"
+ fi
+fi
+#+end_src
+
** toggle-layout
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
:END:
-#+begin_src bash
+#+begin_src bash :tangle no
lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
if [ "$lang" = "us" ]; then
:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
:END:
-#+begin_src bash
+#+begin_src bash :tangle no
xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
#+end_src
+** toggle-tablet
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
+:END:
+
+This script toggles between a 'normal' mode and a 'tablet' mode, doing
+a few things:
+
+- rotates the screen using =xrandr=, so that rotating the physical
+ display of my X220t would have the laptop's battery on the right
+ hand side,
+- enables touch screen,
+- properly rotates the stylus pen and touch screen pointers, and
+- toggles between RGB and Vertical BGR sub-pixel order.
+
+#+begin_src bash :tangle no
+case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
+ 0) # Screen is not rotated, we should rotate it right (90°)
+ xrandr -o 3
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
+ xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
+ ;;
+ 1) # Currently top is rotated right, we should set it normal (0°)
+ xrandr -o 0
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
+ xfconf-query -c xsettings -p /Xft/RGBA -s rgb
+ ;;
+ *)
+ echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
+ exit 1
+ ;;
+esac
+#+end_src
+
+** unlock-def-gk.py
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
+:END:
+
+#+begin_src python :tangle no
+import gnomekeyring as gk
+# list_item_ids_sync('login')[0] == 1L
+gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
+#+end_src
+
+** volume-info
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh :tangle no
+cur_vol=$(pamixer --get-volume)
+
+if [ $(pamixer --get-mute) = true ]; then
+ printf 'mt \n' "$cur_vol"
+else
+ printf '%02d \n' "$cur_vol"
+fi
+#+end_src
+
+** wp
+
+My little wallpaper changer script.
+
+*** wp
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash :tangle no
+export DISPLAY=:0
+
+case "$1" in
+ "day")
+ feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
+ ;;
+ "night")
+ feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
+ ;;
+ *)
+ echo $"Usage: $0 {day|night}"
+ exit 1
+esac
+#+end_src
+
+*** wp-auto
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash :tangle no
+SED=$(which sed)
+ROFI=$(which rofi)
+
+export DISPLAY=:0
+HOUR=$(date +%H)
+
+if [ -z "${SED}" ]
+then
+ echo "Did not find 'sed', script cannot continue."
+ exit 1
+fi
+if [ -z "${ROFI}" ]
+then
+ echo "Did not find rofi, there is no point to continue."
+ exit 1
+fi
+
+###
+# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
+# Repeated calls should leave the config clean-ish
+###
+function set_theme()
+{
+ CDIR="${HOME}/.config/rofi/"
+ if [ ! -d "${CDIR}" ]
+ then
+ mkdir -p ${CDIR}
+ fi
+ if [ -f "${CDIR}/config" ]
+ then
+ ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
+ fi
+ echo "rofi.theme: ${1}" >> "${CDIR}/config"
+
+}
+
+if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
+ then
+ feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
+ xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
+ set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
+ else
+ feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
+ xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
+ set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
+fi
+#+end_src
+
+*** wp.service
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/wp.service
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=wallpaper service
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
+#+end_src
+
+*** wp.timer
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/wp.timer
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+[Unit]
+Description=wallpaper timer
+
+[Timer]
+OnCalendar=07,21:00
+Unit=wp.service
+Persistent=true
+
+[Install]
+WantedBy=timers.target
+#+end_src
+
+** zathura-sync.sh
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh
+pos="$1"
+pdffile="$2"
+zathura --synctex-forward "$pos" "$pdffile" || \
+ (
+ zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
+ sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
+#+end_src
** Fun :)
*** eat-em
projects / ~bandali / configs / blobdiff