This section contains the configuration files (dotfiles) of various
programs I use.
-** bspwm
-
-*** bspwmrc
-:PROPERTIES:
-:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh :tangle no
-sxhkd &
-sh ~/.fehbg &
-xfce4-panel -d &
-compton &
-sleep 0.5 && pasystray --notify=all &
-
-bspc monitor -d I II III IV V VI VII VIII IX X
-#bspc monitor eDP-1 -d I II III IV V
-#bspc monitor HDMI-1 -d VI VII VIII IX X
-
-#bspc config border_width 2
-#bspc config window_gap 8
-bspc config window_gap 0
-
-bspc config bottom_padding 26
-
-bspc config split_ratio 0.52
-bspc config borderless_monocle true
-bspc config gapless_monocle true
-bspc config click_to_focus button1
-bspc config directional_focus_tightness low
-
-#bspc rule -a Firefox desktop='^1' follow=on
-bspc rule -a Nightly desktop='^1' follow=on
-bspc rule -a Emacs desktop='^2' state=tiled follow=on
-#bspc rule -a Chromium desktop='^4' follow=on
-bspc rule -a URxvt state=floating
-bspc rule -a URxvt:tiled state=tiled
-bspc rule -a Connman-gtk state=floating
-bspc rule -a Xfce4-panel state=floating
-bspc rule -a TelegramDesktop state=floating
-bspc rule -a Ec state=floating
-bspc rule -a Pavucontrol state=floating
-bspc rule -a Eog state=floating
-bspc rule -a Seahorse state=floating
-bspc rule -a mpv state=floating
-bspc rule -a Evince state=floating
-bspc rule -a Meld state=floating
-bspc rule -a Autokey-gtk state=floating
-bspc rule -a Mousepad state=floating
-bspc rule -a Wrapper-1.0 state=floating
-bspc rule -a File-roller state=floating
-bspc rule -a Gnome-disks state=floating
-bspc rule -a Termite state=floating
-bspc rule -a Termite:tiled state=tiled
-bspc rule -a Thunderbird:Calendar state=floating
-bspc rule -a Audacity state=floating
-bspc rule -a Proof state=floating # pvs x-show-proof
-bspc rule -a Nm-connection-editor state=floating
-bspc rule -a Wire state=floating
-bspc rule -a discord state=floating
-bspc rule -a X2goclient state=floating
-bspc rule -a SimpleScreenRecorder state=floating
-bspc rule -a Gimp state=floating
-bspc rule -a Wrapper-2.0 state=floating
-bspc rule -a Zathura state=tiled
-#+end_src
-
-*** sxhkdrc
-:PROPERTIES:
-:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
-:END:
-
-#+begin_src conf :tangle no
-#
-# wm independent hotkeys
-#
-
-# terminal emulator
-super + {_,shift} + Return
- urxvt{_, -name tiled}
-
-#super + {_,shift} + Return
-# termite{_, --name=tiled}
-
-# program launcher
-super + space
- rofi -show run -display-run '> ' -display-window ' 🗔 '
-
-super + alt + space
- xfce4-popup-whiskermenu
-
-# window finder
-super + backslash
- rofi -show window -display-run '> ' -display-window ' 🗔 '
-
-# password manager
-alt + space
- rofi-pass
-
-# firefox
-#super + r
-# firefox
-
-# chromium
-#super + c
-# chromium -incognito
-
-# emacs
-super + e
- emacs
-
-# make sxhkd reload its configuration files:
-super + Escape
- pkill -USR1 -x sxhkd
-
-# volume {up,down}
-XF86Audio{Raise,Lower}Volume
- pamixer --allow-boost --{in,de}crease 5
-
-# mute
-XF86AudioMute
- pamixer --toggle-mute
-
-XF86AudioMicMute
- pactl set-source-mute 1 toggle
-
-# playback control
-XF86Audio{Play,Prev,Next}
- mpc {toggle,prev,next}
-
-# lock the screen
-super + shift + q
- light-locker-command -l
-
-# Toggle keyboard layout
-super + F7
- toggle-layout
-
-# Toggle Xfce presentation mode
-XF86LaunchB
- toggle-presentation-mode
-
-# monitor brightness
-XF86MonBrightness{Up,Down}
- light -{A,U} 5
-
-super + apostrophe
- rofi-light
-
-# keyboard brightness
-#XF86KbdBrightness{Up,Down}
-# kbdlight {up,down}
-
-XF86RotateWindows
- toggle-tablet
-
-#
-# bspwm hotkeys
-#
-
-# quit bspwm normally
-super + alt + Escape
- bspc quit
-
-# close and kill
-super + {w,q}
- bspc node -{c,k}
-
-# alternate between the tiled and monocle layout
-super + m
- bspc desktop -l next
-
-# send the newest marked node to the newest preselected node
-super + y
- bspc node newest.marked.local -n newest.!automatic.local
-
-# swap the current node and the biggest node
-super + g
- bspc node -s biggest
-
-#
-# state/flags
-#
-
-# set the window state
-super + {t,shift + t,s,f}
- bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
-
-# set the node flags
-super + ctrl + {m,x,y,z}
- bspc node -g {marked,locked,sticky,private}
-
-#
-# focus/swap
-#
-
-# focus the node in the given direction
-super + {_,shift + }{h,j,k,l}
- bspc node -{f,s} {west,south,north,east}
-
-# focus the node for the given path jump
-super + {p,b,comma,period}
- bspc node -f @{parent,brother,first,second}
-
-# focus the next/previous node in the current desktop
-super + {_,shift + }c
- bspc node -f {next,prev}.local
-
-# focus the next/previous desktop in the current monitor
-super + bracket{left,right}
- bspc desktop -f {prev,next}.local
-
-# send to next/prev desktop
-super + shift + bracket{left,right}
- bspc node -d {prev,next} --follow
-
-# focus the last node/desktop
-super + {grave,Tab}
- bspc {node,desktop} -f last
-
-# focus the older or newer node in the focus history
-super + {o,i}
- bspc wm -h off; \
- bspc node {older,newer} -f; \
- bspc wm -h on
-
-# focus or send to the given desktop
-super + {_,shift + }{1-9,0}
- bspc {desktop -f,node -d} '^{1-9,10}'
-
-#
-# preselect
-#
-
-# preselect the direction
-super + ctrl + {h,j,k,l}
- bspc node -p {west,south,north,east}
-
-# preselect the ratio
-super + ctrl + {1-9}
- bspc node -o 0.{1-9}
-
-# cancel the preselection for the focused node
-super + ctrl + space
- bspc node -p cancel
-
-# cancel the preselection for the focused desktop
-super + ctrl + shift + space
- bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
-
-#
-# move/resize
-#
-
-# expand a window by moving one of its side outward
-super + alt + {h,j,k,l}
- bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
-
-# contract a window by moving one of its side inward
-super + alt + shift + {h,j,k,l}
- bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
-
-# move a floating window
-super + {Left,Down,Up,Right}
- bspc node -v {-20 0,0 20,0 -20,20 0}
-
-#alt + bracket{left,right}
-# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
-#+end_src
-
** compton
:PROPERTIES:
:header-args+: :tangle ~/.config/compton.conf
type = Maildir
path = ~/mail/gnu/Inbox/
+# [destination]
+# type = MDA_external
+# path = /usr/lib/dovecot/deliver
+# arguments = ('-d', 'amin@aminb.org')
+
[options]
delete = True
#+end_src
# order += "ipv6"
order += "disk /"
order += "disk /data"
-order += "wireless _first_"
+# order += "wireless _first_"
order += "ethernet _first_"
order += "battery 0"
order += "volume master"
# Global defaults
CopyArrivalDate yes
Create Both
+Expunge Both
######
IMAPAccount amin
-Host mail.aminb.org
-User amin@aminb.org
+Host mail.bndl.org
+User amin@bndl.org
PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
SSLType IMAPS
IMAPAccount amin-dovecot
Host 127.0.0.1
Port 143
-User amin@aminb.org
+User amin@bndl.org
PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
SSLType None
Master :uwaterloo-remote:
Slave :uwaterloo-local:
Patterns *
+
+######
+IMAPAccount csclub
+Host mail.csclub.uwaterloo.ca
+User abandali
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg"
+SSLType IMAPS
+
+IMAPStore csclub-remote
+Account csclub
+
+IMAPAccount csclub-dovecot
+Host 127.0.0.1
+Port 143
+User abandali@csclub.uw
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-dovecot.gpg"
+SSLType None
+
+IMAPStore csclub-local
+Account csclub-dovecot
+
+Channel csclub
+Master :csclub-remote:
+Slave :csclub-local:
+Patterns *
#+end_src
*** mbsync.service
EndSection
#+end_src
+** mkinitcpio
+
+#+begin_src conf :tangle /sudo::/etc/mkinitcpio.conf :comments none
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run. Advanced users may wish to specify all system modules
+# in this array. For instance:
+# MODULES=(piix ide_disk reiserfs)
+MODULES=(i915)
+
+# BINARIES
+# This setting includes any additional binaries a given user may
+# wish into the CPIO image. This is run last, so it may be used to
+# override the actual binaries included by a given hook
+# BINARIES are dependency parsed, so you may safely ignore libraries
+BINARIES=()
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in any way. This is useful for config files.
+FILES=()
+
+# HOOKS
+# This is the most important setting in this file. The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+## This setup specifies all modules in the MODULES setting above.
+## No raid, lvm2, or encrypted root is needed.
+# HOOKS=(base)
+#
+## This setup will autodetect all modules for your system and should
+## work as a sane default
+# HOOKS=(base udev autodetect block filesystems)
+#
+## This setup will generate a 'full' image which supports most systems.
+## No autodetection is done.
+# HOOKS=(base udev block filesystems)
+#
+## This setup assembles a pata mdadm array with an encrypted root FS.
+## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
+# HOOKS=(base udev block mdadm encrypt filesystems)
+#
+## This setup loads an lvm2 volume group on a usb device.
+# HOOKS=(base udev block lvm2 filesystems)
+#
+## NOTE: If you have /usr on a separate partition, you MUST include the
+# usr, fsck and shutdown hooks.
+HOOKS=(base udev autodetect modconf block keyboard encrypt lvm2 resume filesystems fsck)
+
+# COMPRESSION
+# Use this to compress the initramfs image. By default, gzip compression
+# is used. Use 'cat' to create an uncompressed image.
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+#COMPRESSION="lzma"
+#COMPRESSION="xz"
+#COMPRESSION="lzop"
+#COMPRESSION="lz4"
+
+# COMPRESSION_OPTIONS
+# Additional options for the compressor
+#COMPRESSION_OPTIONS=()
+#+end_src
+
** mpd
:PROPERTIES:
:header-args+: :tangle ~/.config/mpd/mpd.conf
#tls_trust_file /etc/ssl/certs/ca-certificates.crt
logfile ~/.msmtp.log
-# aminb
-account aminb
-host mail.aminb.org
-# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
+# amin
+account amin
+host mail.bndl.org
+# use `msmtp -a amin --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
+tls_fingerprint B8:17:DF:D7:26:56:4F:CD:F0:51:D5:E5:4C:44:B6:F1:C9:47:E7:A2:C7:36:C9:C1:F2:10:85:18:43:72:9D:ED
tls_starttls on
-from amin@aminb.org
-user amin@aminb.org
+from amin@bndl.org
+user amin@bndl.org
passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
+account aminb : amin
+from amin@aminb.org
+
# gnu
account gnu
host fencepost.gnu.org
# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint 34:60:91:B5:71:5B:76:87:50:F3:83:13:26:0F:EE:75:42:83:93:9A:E2:AF:1E:87:72:02:C9:61:CE:28:1B:8E
+tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4
tls_starttls on
from bandali@gnu.org
user bandali
passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
tls_trust_file /etc/ssl/certs/ca-certificates.crt
+# csclub
+account csclub
+host mail.csclub.uwaterloo.ca
+tls_starttls on
+from abandali@csclub.uwaterloo.ca
+user abandali
+passwordeval gpg2 --no-tty -q -d ~/.passwd/csclub.gpg
+tls_trust_file /etc/ssl/certs/ca-certificates.crt
+
# Set a default account
-account default : aminb
+account default : amin
#+end_src
** ncmpcpp
WantedBy=timers.target
#+end_src
-** offlineimap
+** pacman
-*** offlineimaprc
-:PROPERTIES:
-:header-args+: :tangle ~/.offlineimaprc
-:END:
+*** conf
-#+begin_src conf :tangle no
-[general]
-pythonfile = ~/.offlineimap.py
-accounts = Gmail, aminb
-maxsyncaccounts = 3
+#+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
-[Account Gmail]
-localrepository = GmailL
-remoterepository = GmailR
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir = /
+#DBPath = /var/lib/pacman/
+#CacheDir = /var/cache/pacman/pkg/
+#LogFile = /var/log/pacman.log
+#GPGDir = /etc/pacman.d/gnupg/
+#HookDir = /etc/pacman.d/hooks/
+HoldPkg = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg =
+#IgnoreGroup =
+
+#NoUpgrade =
+#NoExtract =
+
+# Misc options
+#UseSyslog
+Color
+TotalDownload
+CheckSpace
+VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all Arch/Parabola packagers
+# with `pacman-key --populate archlinux` and `pacman-key --populate parabola`.
+
+#
+# REPOSITORIES
+# - can be defined here or included from another file
+# - pacman will search repositories in the order defined here
+# - local/custom mirrors can be added here or in separate files
+# - repositories listed first will take precedence when packages
+# have identical names, regardless of version number
+# - URLs will have $repo replaced by the name of the current repo
+# - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+# [repo-name]
+# Server = ServerName
+# Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+# NOTE: Nonprism is a particular repository that aims to provide software built
+# and patched without services under global data surveillance programs like PRISM,
+# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism
+
+#[nonprism-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[nonprism]
+#Include = /etc/pacman.d/mirrorlist
+
+[libre-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[libre]
+Include = /etc/pacman.d/mirrorlist
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
-[Account aminb]
-localrepository = aminbL
-remoterepository = aminbR
+[core]
+Include = /etc/pacman.d/mirrorlist
-[Repository GmailL]
-type = Maildir
-localfolders = ~/Maildir/Gmail
-
-[Repository GmailR]
-type = IMAP
-remotehost = imap.gmail.com
-remoteusereval = mailuser("gmail")
-remotepasseval = mailpasswd("gmail")
-sslcacertfile = /etc/ssl/certs/ca-certificates.crt
-ssl = yes
-folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
-maxconnections = 1
-realdelete = no
-
-[Repository aminbL]
-type = Maildir
-localfolders = ~/Maildir/aminb
-
-[Repository aminbR]
-type = IMAP
-remotehost = mail.aminb.org
-remoteusereval = mailuser("aminb")
-remotepasseval = mailpasswd("aminb")
-sslcacertfile = /etc/ssl/certs/ca-certificates.crt
-ssl = yes
-folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
-maxconnections = 1
-realdelete = no
-#+end_src
+[extra]
+Include = /etc/pacman.d/mirrorlist
-*** offlineimap.py
-:PROPERTIES:
-:header-args+: :tangle ~/.offlineimap.py
-:END:
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
-#+begin_src python :tangle no
-import os
-import subprocess
+[community]
+Include = /etc/pacman.d/mirrorlist
-def mailpasswd(acct):
- acct = os.path.basename(acct)
- path = "/home/amin/.passwd/%s.gpg" % acct
- args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
- try:
- return subprocess.check_output(args).strip()
- except subprocess.CalledProcessError:
- return ""
-
-def mailuser(acct):
- acct = os.path.basename(acct)
- path = "/home/amin/.passwd/%s" % acct
- args = ["cat", path]
- try:
- return subprocess.check_output(args).strip()
- except subprocess.CalledProcessError:
- return ""
-
-def prime_gpg_agent():
- ret = False
- i = 1
- while not ret:
- ret = (mailpasswd("prime") == "prime")
- if i > 2:
- from offlineimap.ui import getglobalui
- sys.stderr.write("Error reading in passwords. Terminating.\n")
- getglobalui().terminate()
- i += 1
- return ret
-
-prime_gpg_agent()
+# The PCR (Parabola Community Repository) contains packages maintained by trusted
+# members of the Parabola community. It also contains packages maintained by
+# Parabola developers, but that the developer decided didn't belong in core/libre.
+
+#[pcr-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[pcr]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the libre-multilib, multilib and pcr-multilib repositories as required here.
+
+#[nonprism-multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[nonprism-multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+#[libre-multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[libre-multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+#[pcr-multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[pcr-multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+# Parabola also supports another community projects and personal repositories, to
+# find them check out this wiki page: https://wiki.parabola.nu/Repositories
+
+# An example of a custom package repository. See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+
+Include = /etc/pacman.d/*.conf
+#+end_src
+
+*** mirrorlist
+
+#+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none
+# Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017
+
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+
+# Location: London, UK
+# Responsible: Parabola Project
+# Note: Not really a mirror, automatically redirects you to an Arch
+# mirror when possible. Works best specifying it a few times in a
+# row (404s workaround).
+# Server = http://redirector.parabola.nu/$repo/os/$arch
+Server = https://redirector.parabola.nu/$repo/os/$arch
+
+# Location: Reykjavík, Iceland
+# Responsible: Parabola Project
+# Note: Not really a mirror, automatically redirects you to a Parabola
+# mirror that has the file you are looking for.
+# Server = http://repomirror.parabola.nu/$repo/os/$arch
+Server = https://repomirror.parabola.nu/$repo/os/$arch
+
+# Location: Falkenstein, Germany
+# Server = http://mirror.grapentin.org/parabola/$repo/os/$arch
+Server = https://mirror.grapentin.org/parabola/$repo/os/$arch
+
+# Location: Volendam, Netherlands
+Server = https://jeweet.net/repo/parabola/$repo/os/$arch
+
+# Location: Amsterdam, Netherlands
+# Note: Not really a mirror, but a high-speed 10GiB cache for
+# mirror.yandex.ru/mirrors/parabola
+# Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch
+Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch
+
+# Location: Moscow, Russian Federation
+# Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
+Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
+
+# Location: Ho Chi Minh City, Vietnam
+# Server = http://mirror.freedif.org/Parabola/$repo/os/$arch
+Server = https://mirror.freedif.org/Parabola/$repo/os/$arch
+
+# Location: Los Angeles, CA, USA
+# Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE
+Server = http://alfplayer.com/parabola/$repo/os/$arch
+
+# Location: Boston, MA, USA
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+
+# Location: Austin, TX, USA
+# Server = http://parabola.serverpit.com/
+Server = https://parabola.serverpit.com/
+
+# Location: Reykjavík, Iceland
+# Responsible: Parabola Project
+# Note: Currently pointing to repomirror.parabola.nu
+# Server = http://repo.parabola.nu/$repo/os/$arch
+Server = https://repo.parabola.nu/$repo/os/$arch
#+end_src
** pigeonhole
-*** gnu.sieve
+*** amin.sieve
:PROPERTIES:
-:header-args+: :tangle ~/sieve/gnu.sieve :comments none
+:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none
:END:
#+begin_src conf
-require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
+require ["regex", "variables", "fileinto", "envelope",
+ "mailbox", "imap4flags", "include"];
+# webmasters
if anyof (
- address :is "from" "webmasters@gnu.org",
- address :is "from" "webmasters-comment@gnu.org") {
- fileinto :create "webmasters";
+ address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
+ fileinto :create "gnu.webmasters";
stop;
}
*** lists.sieve
:PROPERTIES:
-:header-args+: :tangle ~/sieve/lists.sieve :comments none
+:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none
:END:
#+begin_src conf
-require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
- "include" ];
+require ["regex", "variables", "fileinto", "envelope",
+ "mailbox", "imap4flags", "include"];
+# mailing lists
if anyof (
- header :contains "list-id" "<emacs-devel.gnu.org>",
- header :contains "list-id" "<emacs-orgmode.gnu.org>",
- header :contains "list-id" "<emacsconf-discuss.gnu.org>",
- header :contains "list-id" "<fencepost-users.gnu.org>",
- header :contains "list-id" "<guix-devel.gnu.org>",
- header :contains "list-id" "<guile-devel.gnu.org>",
- header :contains "list-id" "<help-gnu-emacs.gnu.org>",
- header :contains "list-id" "<info-gnu-emacs.gnu.org>",
- header :contains "list-id" "<www-commits.gnu.org>",
- header :contains "list-id" "<www-discuss.gnu.org>",
- header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
- header :contains "list-id" "<haskell-cafe.haskell.org>",
- header :contains "list-id" "<haskell-art.we.lurk.org>",
- header :contains "list-id" "<notmuch.notmuchmail.org>") {
+ header :contains "list-id"
+ [ "<emacs-devel.gnu.org>"
+ , "<emacs-orgmode.gnu.org>"
+ , "<emacsconf-discuss.gnu.org>"
+ , "<fencepost-users.gnu.org>"
+ , "<guix-devel.gnu.org>"
+ , "<guile-devel.gnu.org>"
+ , "<help-gnu-emacs.gnu.org>"
+ , "<info-gnu-emacs.gnu.org>"
+ , "<info-guix.gnu.org>"
+ , "<www-commits.gnu.org>"
+ , "<www-discuss.gnu.org>"
+ , "<deepspec.lists.cs.princeton.edu>"
+ , "<haskell-cafe.haskell.org>"
+ , "<haskell-art.we.lurk.org>"
+ , "<notmuch.notmuchmail.org>"
+ ] ) {
if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
set :lower "listname" "${1}";
- fileinto :create "l/${listname}";
+ fileinto :create "gnu.${listname}";
+ stop;
}
}
+# sr.ht lists, with dots ('.') omitted
if anyof (
- header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
- if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
+ header :contains "list-id"
+ [ "<~bandali/public-inbox@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
+ ] ) {
+ if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
set :lower "username" "${1}";
- set :lower "listname" "${2}";
- fileinto :create "l/${username}/${listname}";
+ set :lower "listname" "${2}${3}${4}${5}${6}${7}";
+ fileinto :create "gnu.${username}.${listname}";
+ stop;
}
}
#+end_src
-** polybar
-
-*** config
-:PROPERTIES:
-:header-args+: :tangle ~/.config/polybar/config
-:END:
-
-#+begin_src conf :tangle no
-;=====================================================
-;
-; To learn more about how to configure Polybar
-; go to https://github.com/jaagr/polybar
-;
-; The README contains alot of information
-;
-;=====================================================
-
-[colors]
-;background = ${xrdb:color0:#222}
-background = #222
-background-alt = #444
-;foreground = ${xrdb:color7:#222}
-foreground = #eee
-foreground-alt = #888
-primary = #ffb52a
-secondary = #e60053
-alert = #bd2c40
-
-[bar/main]
-;monitor = ${env:MONITOR:HDMI-1}
-width = 100%
-height = 27
-;offset-x = 1%
-;offset-y = 1%
-radius = 3.0
-fixed-center = true
-
-background = ${colors.background}
-foreground = ${colors.foreground}
-
-line-size = 3
-line-color = #f00
-
-border-size = 4
-border-color = #00000000
-
-padding-left = 0
-padding-right = 2
-
-module-margin-left = 2
-module-margin-right = 2
-
-font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
-font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
-font-2 = Wuncon Siji:pixelsize=10;1
-font-3 = FontAwesome:pixelsize=10;1
-
-modules-left = bspwm xwindow
-modules-center =
-modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
-
-tray-position = right
-tray-padding = 1
-;tray-transparent = true
-;tray-background = #0063ff
-tray-maxsize = 18
-
-wm-restack = bspwm
-
-;override-redirect = true
-
-scroll-up = bspwm-desknext
-scroll-down = bspwm-deskprev
-
-[module/xwindow]
-type = internal/xwindow
-label = %title:0:50:...%
-
-[module/xkeyboard]
-type = internal/xkeyboard
-blacklist-0 = num lock
-
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-prefix-underline = ${colors.secondary}
-
-label-layout = %layout%
-label-layout-underline = ${colors.secondary}
-
-label-indicator-padding = 2
-label-indicator-margin = 1
-label-indicator-background = ${colors.secondary}
-label-indicator-underline = ${colors.secondary}
-
-[module/filesystem]
-type = internal/fs
-interval = 25
-
-mount-0 = /
-
-label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
-label-unmounted = %mountpoint% not mounted
-label-unmounted-foreground = ${colors.foreground-alt}
-
-[module/bspwm]
-type = internal/bspwm
-
-label-focused = %index%
-label-focused-background = ${colors.background-alt}
-label-focused-underline= ${colors.primary}
-label-focused-padding = 2
-
-label-occupied = %index%
-label-occupied-padding = 2
-
-label-urgent = %index%!
-label-urgent-background = ${colors.alert}
-label-urgent-padding = 2
-
-label-empty = %index%
-label-empty-foreground = ${colors.foreground-alt}
-label-empty-padding = 2
-
-[module/i3]
-type = internal/i3
-format = <label-state> <label-mode>
-index-sort = true
-wrapping-scroll = false
-
-; Only show workspaces on the same output as the bar
-;pin-workspaces = true
-
-label-mode-padding = 2
-label-mode-foreground = #000
-label-mode-background = ${colors.primary}
-
-; focused = Active workspace on focused monitor
-label-focused = %index%
-label-focused-background = ${module/bspwm.label-focused-background}
-label-focused-underline = ${module/bspwm.label-focused-underline}
-label-focused-padding = ${module/bspwm.label-focused-padding}
-
-; unfocused = Inactive workspace on any monitor
-label-unfocused = %index%
-label-unfocused-padding = ${module/bspwm.label-occupied-padding}
-
-; visible = Active workspace on unfocused monitor
-label-visible = %index%
-label-visible-background = ${self.label-focused-background}
-label-visible-underline = ${self.label-focused-underline}
-label-visible-padding = ${self.label-focused-padding}
-
-; urgent = Workspace with urgency hint set
-label-urgent = %index%
-label-urgent-background = ${module/bspwm.label-urgent-background}
-label-urgent-padding = ${module/bspwm.label-urgent-padding}
-
-[module/mpd]
-type = internal/mpd
-format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
-
-icon-prev =
-icon-stop =
-icon-play =
-icon-pause =
-icon-next =
-
-label-song-maxlen = 25
-label-song-ellipsis = true
-
-[module/xbacklight]
-type = internal/xbacklight
-
-format = <label> <bar>
-label = BL
-
-bar-width = 10
-bar-indicator = |
-bar-indicator-foreground = #ff
-bar-indicator-font = 2
-bar-fill = ─
-bar-fill-font = 2
-bar-fill-foreground = #9f78e1
-bar-empty = ─
-bar-empty-font = 2
-bar-empty-foreground = ${colors.foreground-alt}
-
-[module/backlight-acpi]
-inherit = module/xbacklight
-type = internal/backlight
-;card = intel_backlight
-card = mba6x_backlight
-
-[module/cpu]
-type = internal/cpu
-interval = 2
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #f90000
-label = %percentage%%
-
-[module/memory]
-type = internal/memory
-interval = 2
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #4bffdc
-label = %percentage_used%%
-
-[module/wlan]
-type = internal/network
-interface =
-interval = 3.0
-
-format-connected = <ramp-signal> <label-connected>
-format-connected-underline = #9f78e1
-label-connected = %essid%
-
-format-disconnected =
-;format-disconnected = <label-disconnected>
-;format-disconnected-underline = ${self.format-connected-underline}
-;label-disconnected = %ifname% disconnected
-;label-disconnected-foreground = ${colors.foreground-alt}
-
-ramp-signal-0 =
-ramp-signal-1 =
-ramp-signal-2 =
-ramp-signal-3 =
-ramp-signal-4 =
-ramp-signal-foreground = ${colors.foreground-alt}
-
-[module/eth]
-type = internal/network
-interface =
-interval = 3.0
-
-format-connected-underline = #55aa55
-format-connected-prefix = " "
-format-connected-prefix-foreground = ${colors.foreground-alt}
-label-connected = %local_ip%
-
-format-disconnected =
-;format-disconnected = <label-disconnected>
-;format-disconnected-underline = ${self.format-connected-underline}
-;label-disconnected = %ifname% disconnected
-;label-disconnected-foreground = ${colors.foreground-alt}
-
-[module/date]
-type = internal/date
-interval = 5
-
-date =
-date-alt = " %Y-%m-%d"
-
-time = %H:%M
-time-alt = %H:%M:%S
-
-format-prefix =
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #0a6cf5
-
-label = %date% %time%
-
-[module/volume]
-type = internal/volume
-
-format-volume = <label-volume> <bar-volume>
-label-volume = vol
-label-volume-foreground = ${root.foreground}
-
-format-muted-prefix = " "
-format-muted-foreground = ${colors.foreground-alt}
-label-muted = mute
-
-bar-volume-width = 10
-bar-volume-foreground-0 = #55aa55
-bar-volume-foreground-1 = #55aa55
-bar-volume-foreground-2 = #55aa55
-bar-volume-foreground-3 = #55aa55
-bar-volume-foreground-4 = #55aa55
-bar-volume-foreground-5 = #f5a70a
-bar-volume-foreground-6 = #ff5555
-bar-volume-gradient = false
-bar-volume-indicator = |
-bar-volume-indicator-font = 2
-bar-volume-fill = ─
-bar-volume-fill-font = 2
-bar-volume-empty = ─
-bar-volume-empty-font = 2
-bar-volume-empty-foreground = ${colors.foreground-alt}
-
-[module/battery]
-type = internal/battery
-battery = BAT0
-adapter = ADP1
-full-at = 64
-
-format-charging = <animation-charging> <label-charging>
-format-charging-underline = #ffb52a
-
-format-discharging = <ramp-capacity> <label-discharging>
-format-discharging-underline = ${self.format-charging-underline}
-
-format-full-prefix = " "
-format-full-prefix-foreground = ${colors.foreground-alt}
-format-full-underline = ${self.format-charging-underline}
-
-ramp-capacity-0 =
-ramp-capacity-1 =
-ramp-capacity-2 =
-ramp-capacity-foreground = ${colors.foreground-alt}
-
-animation-charging-0 =
-animation-charging-1 =
-animation-charging-2 =
-animation-charging-foreground = ${colors.foreground-alt}
-animation-charging-framerate = 750
-
-[module/temperature]
-type = internal/temperature
-thermal-zone = 1
-warn-temperature = 66
-
-format = <ramp> <label>
-format-underline = #f50a4d
-format-warn = <ramp> <label-warn>
-format-warn-underline = ${self.format-underline}
-
-label = %temperature%
-label-warn = %temperature%
-label-warn-foreground = ${colors.secondary}
-
-ramp-0 =
-ramp-1 =
-ramp-2 =
-ramp-foreground = ${colors.foreground-alt}
-
-[module/powermenu]
-type = custom/menu
-
-format-spacing = 1
-
-label-open =
-label-open-foreground = ${colors.secondary}
-label-close = cancel
-label-close-foreground = ${colors.secondary}
-label-separator = |
-label-separator-foreground = ${colors.foreground-alt}
-
-menu-0-0 = reboot
-menu-0-0-exec = menu-open-1
-menu-0-1 = power off
-menu-0-1-exec = menu-open-2
-
-menu-1-0 = cancel
-menu-1-0-exec = menu-open-0
-menu-1-1 = reboot
-menu-1-1-exec = sudo reboot
-
-menu-2-0 = power off
-menu-2-0-exec = sudo poweroff
-menu-2-1 = cancel
-menu-2-1-exec = menu-open-0
-
-[module/mail]
-type = custom/script
-interval = 60
-format = <label>
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #0a6cf5
-exec = notmuch count tag:unread
-
-[settings]
-screenchange-reload = true
-;compositing-background = xor
-;compositing-background = screen
-;compositing-foreground = source
-;compositing-border = over
-
-[global/wm]
-margin-top = 0
-margin-bottom = 0
-
-; vim:ft=dosini
-#+end_src
-
-*** polybar-launch
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
-:END:
-
-#+begin_src sh :tangle no
-# Terminate already running bar instances
-killall -q polybar
-
-# Wait until the processes have been shut down
-while pgrep -x polybar >/dev/null; do sleep 1; done
-
-# Launch main bar
-polybar main &
-
-echo "Bars launched..."
-#+end_src
-
** PowerTOP
:PROPERTIES:
:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
WantedBy=multi-user.target
#+end_src
-** ranger
-
-*** rc.conf
-:PROPERTIES:
-:header-args+: :tangle ~/.config/ranger/rc.conf
-:END:
-
-#+begin_src conf :tangle no
-# ===================================================================
-# This file contains the default startup commands for ranger.
-# To change them, it is recommended to create the file
-# ~/.config/ranger/rc.conf and add your custom commands there.
-#
-# If you copy this whole file there, you may want to set the environment
-# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
-#
-# The purpose of this file is mainly to define keybindings and settings.
-# For running more complex python code, please create a plugin in "plugins/" or
-# a command in "commands.py".
-#
-# Each line is a command that will be run before the user interface
-# is initialized. As a result, you can not use commands which rely
-# on the UI such as :delete or :mark.
-# ===================================================================
-
-# ===================================================================
-# == Options
-# ===================================================================
-
-# How many columns are there, and what are their relative widths?
-set column_ratios 1,3,4
-
-# Which files should be hidden? (regular expression)
-set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
-
-# Show hidden files? You can toggle this by typing 'zh'
-set show_hidden false
-
-# Ask for a confirmation when running the "delete" command?
-# Valid values are "always" (default), "never", "multiple"
-# With "multiple", ranger will ask only if you delete multiple files at once.
-set confirm_on_delete multiple
-
-# Which script is used to generate file previews?
-# ranger ships with scope.sh, a script that calls external programs (see
-# README for dependencies) to preview images, archives, etc.
-set preview_script ~/.config/ranger/scope.sh
-
-# Use the external preview script or display simple plain text previews?
-set use_preview_script true
-
-# Open all images in this directory when running certain image viewers
-# like feh or sxiv? You can still open selected files by marking them.
-set open_all_images true
-
-# Be aware of version control systems and display information.
-set vcs_aware false
-
-# State of the three backends git, hg, bzr. The possible states are
-# disabled, local (only show local info), enabled (show local and remote
-# information).
-set vcs_backend_git enabled
-set vcs_backend_hg disabled
-set vcs_backend_bzr disabled
-
-# Preview images in full color with the external command "w3mimgpreview"?
-# This requires the console web browser "w3m" and a supported terminal.
-# It has been successfully tested with "xterm" and "urxvt" without tmux.
-set preview_images true
-
-# Use a unicode "..." character to mark cut-off filenames?
-set unicode_ellipsis false
-
-# Show dotfiles in the bookmark preview box?
-set show_hidden_bookmarks true
-
-# Which colorscheme to use? These colorschemes are available by default:
-# default, jungle, snow
-set colorscheme default
-
-# Preview files on the rightmost column?
-# And collapse (shrink) the last column if there is nothing to preview?
-set preview_files true
-set preview_directories true
-set collapse_preview true
-
-# Save the console history on exit?
-set save_console_history true
-
-# Draw the status bar on top of the browser window (default: bottom)
-set status_bar_on_top false
-
-# Draw a progress bar in the status bar which displays the average state of all
-# currently running tasks which support progress bars?
-set draw_progress_bar_in_status_bar true
-
-# Draw borders around columns?
-set draw_borders true
-
-# Display the directory name in tabs?
-set dirname_in_tabs false
-
-# Enable the mouse support?
-set mouse_enabled true
-
-# Display the file size in the main column or status bar?
-set display_size_in_main_column true
-set display_size_in_status_bar true
-
-# Display files tags in all columns or only in main column?
-set display_tags_in_all_columns true
-
-# Set a title for the window?
-set update_title false
-
-# Set the title to "ranger" in the tmux program?
-set update_tmux_title false
-
-# Shorten the title if it gets long? The number defines how many
-# directories are displayed at once, 0 turns off this feature.
-set shorten_title 3
-
-# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
-set tilde_in_titlebar false
-
-# How many directory-changes or console-commands should be kept in history?
-set max_history_size 20
-set max_console_history_size 50
-
-# Try to keep so much space between the top/bottom border when scrolling:
-set scroll_offset 8
-
-# Flush the input after each key hit? (Noticable when ranger lags)
-set flushinput true
-
-# Padding on the right when there's no preview?
-# This allows you to click into the space to run the file.
-set padding_right true
-
-# Save bookmarks (used with mX and `X) instantly?
-# This helps to synchronize bookmarks between multiple ranger
-# instances but leads to *slight* performance loss.
-# When false, bookmarks are saved when ranger is exited.
-set autosave_bookmarks true
-
-# You can display the "real" cumulative size of directories by using the
-# command :get_cumulative_size or typing "dc". The size is expensive to
-# calculate and will not be updated automatically. You can choose
-# to update it automatically though by turning on this option:
-set autoupdate_cumulative_size false
-
-# Turning this on makes sense for screen readers:
-set show_cursor false
-
-# One of: size, basename, mtime, type
-set sort natural
-
-# Additional sorting options
-set sort_reverse false
-set sort_case_insensitive true
-set sort_directories_first true
-
-# Enable this if key combinations with the Alt Key don't work for you.
-# (Especially on xterm)
-set xterm_alt_key false
-
-# ===================================================================
-# == Local Options
-# ===================================================================
-# You can set local options that only affect a single directory.
-
-# Examples:
-# setlocal path=~/downloads sort mtime
-
-# ===================================================================
-# == Command Aliases in the Console
-# ===================================================================
-
-alias e edit
-alias q quit
-alias q! quitall
-alias qall quitall
-alias setl setlocal
-
-alias filter scout -prt
-alias find scout -aet
-alias mark scout -mr
-alias unmark scout -Mr
-alias search scout -rs
-alias search_inc scout -rts
-alias travel scout -aefiklst
-
-# ===================================================================
-# == Define keys for the browser
-# ===================================================================
-
-# Basic
-map Q quit!
-map q quit
-copymap q ZZ ZQ
-
-map R reload_cwd
-map <C-r> reset
-map <C-l> redraw_window
-map <C-c> abort
-map <esc> change_mode normal
-
-map i display_file
-map ? help
-map W display_log
-map w taskview_open
-map S shell $SHELL
-
-map : console
-map ; console
-map ! console shell
-map @ console -p6 shell %%s
-map # console shell -p
-map s console shell
-map r chain draw_possible_programs; console open_with
-map f console find
-map cd console cd
-
-# Tagging / Marking
-map t tag_toggle
-map ut tag_remove
-map "<any> tag_toggle tag=%any
-map <Space> mark_files toggle=True
-map v mark_files all=True toggle=True
-map uv mark_files all=True val=False
-map V toggle_visual_mode
-map uV toggle_visual_mode reverse=True
-
-# For the nostalgics: Midnight Commander bindings
-map <F1> help
-map <F3> display_file
-map <F4> edit
-map <F5> copy
-map <F6> cut
-map <F7> console mkdir
-map <F8> console delete
-map <F10> exit
-
-# In case you work on a keyboard with dvorak layout
-map <UP> move up=1
-map <DOWN> move down=1
-map <LEFT> move left=1
-map <RIGHT> move right=1
-map <HOME> move to=0
-map <END> move to=-1
-map <PAGEDOWN> move down=1 pages=True
-map <PAGEUP> move up=1 pages=True
-map <CR> move right=1
-map <DELETE> console delete
-map <INSERT> console touch
-
-# VIM-like
-copymap <UP> k
-copymap <DOWN> j
-copymap <LEFT> h
-copymap <RIGHT> l
-copymap <HOME> gg
-copymap <END> G
-copymap <PAGEDOWN> <C-F>
-copymap <PAGEUP> <C-B>
-
-map J move down=0.5 pages=True
-map K move up=0.5 pages=True
-copymap J <C-D>
-copymap K <C-U>
-
-# Jumping around
-map H history_go -1
-map L history_go 1
-map ] move_parent 1
-map [ move_parent -1
-map } traverse
-
-map gh cd ~
-map ge cd /etc
-map gu cd /usr
-map gd cd /dev
-map gl cd -r .
-map gL cd -r %f
-map go cd /opt
-map gv cd /var
-map gm cd /media
-map gM cd /mnt
-map gs cd /srv
-map gr cd /
-map gR eval fm.cd(ranger.RANGERDIR)
-map g/ cd /
-map g? cd /usr/share/doc/ranger
-
-# External Programs
-map E edit
-map du shell -p du --max-depth=1 -h --apparent-size
-map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
-map yp shell -d echo -n %d/%f | xsel -i
-map yd shell -d echo -n %d | xsel -i
-map yn shell -d echo -n %f | xsel -i
-
-# Filesystem Operations
-map = chmod
-
-map cw console rename
-map A eval fm.open_console('rename ' + fm.thisfile.basename)
-map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
-
-map pp paste
-map po paste overwrite=True
-map pl paste_symlink relative=False
-map pL paste_symlink relative=True
-map phl paste_hardlink
-map pht paste_hardlinked_subtree
-
-map dd cut
-map ud uncut
-map da cut mode=add
-map dr cut mode=remove
-
-map yy copy
-map uy uncut
-map ya copy mode=add
-map yr copy mode=remove
-
-# Temporary workarounds
-map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
-map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
-map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
-map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
-map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
-map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
-map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
-map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
-
-# Searching
-map / console search
-map n search_next
-map N search_next forward=False
-map ct search_next order=tag
-map cs search_next order=size
-map ci search_next order=mimetype
-map cc search_next order=ctime
-map cm search_next order=mtime
-map ca search_next order=atime
-
-# Tabs
-map <C-n> tab_new ~
-map <C-w> tab_close
-map <TAB> tab_move 1
-map <S-TAB> tab_move -1
-map <A-Right> tab_move 1
-map <A-Left> tab_move -1
-map gt tab_move 1
-map gT tab_move -1
-map gn tab_new ~
-map gc tab_close
-map uq tab_restore
-map <a-1> tab_open 1
-map <a-2> tab_open 2
-map <a-3> tab_open 3
-map <a-4> tab_open 4
-map <a-5> tab_open 5
-map <a-6> tab_open 6
-map <a-7> tab_open 7
-map <a-8> tab_open 8
-map <a-9> tab_open 9
-
-# Sorting
-map or toggle_option sort_reverse
-map os chain set sort=size; set sort_reverse=False
-map ob chain set sort=basename; set sort_reverse=False
-map on chain set sort=natural; set sort_reverse=False
-map om chain set sort=mtime; set sort_reverse=False
-map oc chain set sort=ctime; set sort_reverse=False
-map oa chain set sort=atime; set sort_reverse=False
-map ot chain set sort=type; set sort_reverse=False
-
-map oS chain set sort=size; set sort_reverse=True
-map oB chain set sort=basename; set sort_reverse=True
-map oN chain set sort=natural; set sort_reverse=True
-map oM chain set sort=mtime; set sort_reverse=True
-map oC chain set sort=ctime; set sort_reverse=True
-map oA chain set sort=atime; set sort_reverse=True
-map oT chain set sort=type; set sort_reverse=True
-
-map dc get_cumulative_size
-
-# Settings
-map zc toggle_option collapse_preview
-map zd toggle_option sort_directories_first
-map zh toggle_option show_hidden
-map <C-h> toggle_option show_hidden
-map zi toggle_option flushinput
-map zm toggle_option mouse_enabled
-map zp toggle_option preview_files
-map zP toggle_option preview_directories
-map zs toggle_option sort_case_insensitive
-map zu toggle_option autoupdate_cumulative_size
-map zv toggle_option use_preview_script
-map zf console filter
-
-# Bookmarks
-map `<any> enter_bookmark %any
-map '<any> enter_bookmark %any
-map m<any> set_bookmark %any
-map um<any> unset_bookmark %any
-
-map m<bg> draw_bookmarks
-copymap m<bg> um<bg> `<bg> '<bg>
-
-# Generate all the chmod bindings with some python help:
-eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
-
-eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
-
-# ===================================================================
-# == Define keys for the console
-# ===================================================================
-# Note: Unmapped keys are passed directly to the console.
-
-# Basic
-cmap <tab> eval fm.ui.console.tab()
-cmap <s-tab> eval fm.ui.console.tab(-1)
-cmap <ESC> eval fm.ui.console.close()
-cmap <CR> eval fm.ui.console.execute()
-cmap <C-l> redraw_window
-
-copycmap <ESC> <C-c>
-copycmap <CR> <C-j>
-
-# Move around
-cmap <up> eval fm.ui.console.history_move(-1)
-cmap <down> eval fm.ui.console.history_move(1)
-cmap <left> eval fm.ui.console.move(left=1)
-cmap <right> eval fm.ui.console.move(right=1)
-cmap <home> eval fm.ui.console.move(right=0, absolute=True)
-cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
-
-# Line Editing
-cmap <backspace> eval fm.ui.console.delete(-1)
-cmap <delete> eval fm.ui.console.delete(0)
-cmap <C-w> eval fm.ui.console.delete_word()
-cmap <C-k> eval fm.ui.console.delete_rest(1)
-cmap <C-u> eval fm.ui.console.delete_rest(-1)
-cmap <C-y> eval fm.ui.console.paste()
-
-# And of course the emacs way
-copycmap <up> <C-p>
-copycmap <down> <C-n>
-copycmap <left> <C-b>
-copycmap <right> <C-f>
-copycmap <home> <C-a>
-copycmap <end> <C-e>
-copycmap <delete> <C-d>
-copycmap <backspace> <C-h>
-
-# Note: There are multiple ways to express backspaces. <backspace> (code 263)
-# and <backspace2> (code 127). To be sure, use both.
-copycmap <backspace> <backspace2>
-
-# This special expression allows typing in numerals:
-cmap <allow_quantifiers> false
-
-# ===================================================================
-# == Pager Keybindings
-# ===================================================================
-
-# Movement
-pmap <down> pager_move down=1
-pmap <up> pager_move up=1
-pmap <left> pager_move left=4
-pmap <right> pager_move right=4
-pmap <home> pager_move to=0
-pmap <end> pager_move to=-1
-pmap <pagedown> pager_move down=1.0 pages=True
-pmap <pageup> pager_move up=1.0 pages=True
-pmap <C-d> pager_move down=0.5 pages=True
-pmap <C-u> pager_move up=0.5 pages=True
-
-copypmap <UP> k <C-p>
-copypmap <DOWN> j <C-n> <CR>
-copypmap <LEFT> h
-copypmap <RIGHT> l
-copypmap <HOME> g
-copypmap <END> G
-copypmap <C-d> d
-copypmap <C-u> u
-copypmap <PAGEDOWN> n f <C-F> <Space>
-copypmap <PAGEUP> p b <C-B>
-
-# Basic
-pmap <ESC> pager_close
-copypmap <ESC> q Q i <F3>
-pmap E edit_file
-
-# ===================================================================
-# == Taskview Keybindings
-# ===================================================================
-
-# Movement
-tmap <up> taskview_move up=1
-tmap <down> taskview_move down=1
-tmap <home> taskview_move to=0
-tmap <end> taskview_move to=-1
-tmap <pagedown> taskview_move down=1.0 pages=True
-tmap <pageup> taskview_move up=1.0 pages=True
-tmap <C-d> taskview_move down=0.5 pages=True
-tmap <C-u> taskview_move up=0.5 pages=True
-
-copytmap <UP> k <C-p>
-copytmap <DOWN> j <C-n> <CR>
-copytmap <HOME> g
-copytmap <END> G
-copytmap <C-u> u
-copytmap <PAGEDOWN> n f <C-F> <Space>
-copytmap <PAGEUP> p b <C-B>
-
-# Changing priority and deleting tasks
-tmap J eval -q fm.ui.taskview.task_move(-1)
-tmap K eval -q fm.ui.taskview.task_move(0)
-tmap dd eval -q fm.ui.taskview.task_remove()
-tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
-tmap <pageup> eval -q fm.ui.taskview.task_move(0)
-tmap <delete> eval -q fm.ui.taskview.task_remove()
-
-# Basic
-tmap <ESC> taskview_close
-copytmap <ESC> q Q w <C-c>
-#+end_src
-
-*** scope.sh
-:PROPERTIES:
-:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
-:END:
-
-#+begin_src sh :tangle no
-# ranger supports enhanced previews. If the option "use_preview_script"
-# is set to True and this file exists, this script will be called and its
-# output is displayed in ranger. ANSI color codes are supported.
-
-# NOTES: This script is considered a configuration file. If you upgrade
-# ranger, it will be left untouched. (You must update it yourself.)
-# Also, ranger disables STDIN here, so interactive scripts won't work properly
-
-# Meanings of exit codes:
-# code | meaning | action of ranger
-# -----+------------+-------------------------------------------
-# 0 | success | success. display stdout as preview
-# 1 | no preview | failure. display no preview at all
-# 2 | plain text | display the plain content of the file
-# 3 | fix width | success. Don't reload when width changes
-# 4 | fix height | success. Don't reload when height changes
-# 5 | fix both | success. Don't ever reload
-
-# Meaningful aliases for arguments:
-path="$1" # Full path of the selected file
-width="$2" # Width of the preview pane (number of fitting characters)
-height="$3" # Height of the preview pane (number of fitting characters)
-
-maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
-
-# Find out something about the file:
-mimetype=$(file --mime-type -Lb "$path")
-extension=${path##*.}
-
-# Functions:
-# runs a command and saves its output into $output. Useful if you need
-# the return value AND want to use the output in a pipe
-try() { output=$(eval '"$@"'); }
-
-# writes the output of the previouosly used "try" command
-dump() { echo "$output"; }
-
-# a common post-processing function used after most commands
-trim() { head -n "$maxln"; }
-
-# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
-highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
-
-case "$extension" in
- # Archive extensions:
- 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
- rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
- try als "$path" && { dump | trim; exit 0; }
- try acat "$path" && { dump | trim; exit 3; }
- try bsdtar -lf "$path" && { dump | trim; exit 0; }
- exit 1;;
- rar)
- try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
- # PDF documents:
- pdf)
- try pdftotext -l 10 -nopgbrk -q "$path" - && \
- { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
- # BitTorrent Files
- torrent)
- try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
- # HTML Pages:
- htm|html|xhtml)
- try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
- try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
- try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
- ;; # fall back to highlight/cat if the text browsers fail
-esac
-
-case "$mimetype" in
- # Syntax highlight for text files:
- text/* | */xml)
- try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
- # Ascii-previews of images:
- image/*)
- img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
- # Display information about media files:
- video/* | audio/*)
- exiftool "$path" && exit 5
- # Use sed to remove spaces so the output fits into the narrow window
- try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
-esac
-
-exit 1
-#+end_src
-
** redshift
:PROPERTIES:
:header-args+: :tangle ~/.config/redshift.conf :comments none
# Options for generating new password entries
# default_user is also used for password files that have no user field.
default_user=aminb
-default_user2=aminban
+default_user2=bandali
password_length=30
# Custom Keybindings
exec swayidle \
timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
- before-sleep swaylock
### Key bindings
# Basics:
#
# start a terminal
- bindsym $mod+Return exec $term
+ bindsym $mod+Return exec $term -name floating
+ bindsym $mod+Shift+Return exec $term
+ for_window [class="URxvt" instance="floating"] floating enable
# kill focused window
bindsym $mod+Shift+q kill
bindsym $mod+Shift+c reload
# exit sway (logs you out of your wayland session)
- bindsym $mod+Shift+e exit
+ # bindsym $mod+Shift+e exit
bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
bindsym XF86AudioMute exec pamixer --toggle-mute
bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
+ bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
+
# original sway workspace switch and window move
bindsym $mod+bracketleft workspace prev
bindsym $mod+bracketright workspace next
# Make the current focus fullscreen
bindsym $mod+f fullscreen
+ # Toggle sticky-ness of the current (floating) window
+ bindsym $mod+$mod2+space sticky toggle
+
# Toggle the current focus between tiling and floating mode
bindsym $mod+Shift+space floating toggle
bindsym Escape mode "default"
bindsym q mode "default"
}
-bindsym XF86PowerOff mode "$mode_system"
+# bindsym XF86PowerOff mode "$mode_system"
+bindsym $mod+Shift+e mode "$mode_system"
#
# Presentation mode
bindsym q mode default
}
+#
+# Window configurations
+#
+for_window [class="mpv"] floating enable
+for_window [class="TelegramDesktop"] floating enable
+for_window [app_id="pavucontrol"] floating enable
+for_window [app_id="meld"] floating enable
+for_window [app_id="nm-connection-editor"] floating enable
+
#
# Status Bar:
#
position bottom
colors {
statusline #ffffff
- background #323232
- inactive_workspace #32323200 #32323200 #5c5c5c
+ background #212121
+ inactive_workspace #21212100 #21212100 #5c5c5c
}
status_command i3status | my-i3status.py
}
# font pango: Liberation Mono 9
exec xrdb .Xresources
-exec pgrep -x "systemd-inhibit" || \
- systemd-inhibit --what=handle-power-key --who=aminb \
- --why="Handle power button in sway" sleep infinity
+# exec pgrep -x "systemd-inhibit" || \
+# systemd-inhibit --what=handle-power-key --who=aminb \
+# --why="Handle power button in sway" sleep infinity
exec mako 2>&1 >/tmp/mako.log
exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
scaling=fill
#+end_src
+** systemd
+
+Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
+
+#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf
+[Service]
+TTYVTDisallocate=no
+#+end_src
** TLP
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
# are ignored when this is enabled!
#RESTORE_DEVICE_STATE_ON_STARTUP=0
-RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=1
# Radio devices to disable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
-DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
# Radio devices to enable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
# Radio devices to disable on battery: bluetooth, wifi, wwan.
#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
+DEVICES_TO_DISABLE_ON_BAT="bluetooth"
# Radio devices to disable on battery when not in use (not connected):
# bluetooth, wifi, wwan.
#+begin_src conf-xdefaults
! Font
URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
-URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
-URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
-URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
+URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
+URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
+URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
URxvt.xftAntialias: true
URxvt.letterSpace: 0
:END:
#+begin_src sh
-
-
#################
# CORE SETTINGS #
#################
#zhighlighters=(main brackets cursor)
zhighlighters=(main brackets pattern)
-
#
# SSH
#
# Load these ssh identities with the ssh module
zssh_ids=(id_ed25519_bandali)
-
#
# Pacman
#
# Load any helper scripts as defined here
#zpacman_helper=(aur)
+
+
#+end_src
*** zlogin
:END:
#+begin_src sh
-
-
#
# User configuration sourced by login shells
#
# Initialize zim
[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
+
#+end_src
*** zprofile
export NIXPKGS=$HOME/src/git/nixpkgs
if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
+
+export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
+export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH"
+export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
+export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
+export GIT_SSL_CAINFO="$SSL_CERT_FILE"
#+end_src
*** zshenv
# User configuration sourced by interactive shells
#
-# Change default zim location
+# Define zim location
export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
# Start zim
alias cp="cp -iv"
alias scl=systemctl
alias jcl=journalctl
-alias m="mbsync -a"
+alias m="mbsync csclub; mbsync uwaterloo; mbsync amin"
alias best="youtube-dl -f best"
alias sd="ssh deb"
alias sf="ssh fp"
# i-beam cursor
echo -e "\033[5 q"
#echo -e "\033[6 q"
+
#+end_src
* Scripts
#+begin_src bash
cur=$(light -G)
val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
-light -S $val
+[ -n "$val" ] && light -S $val
+#+end_src
+
+** rofi-remmina.py
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
+:END:
+
+#+begin_src python
+import ConfigParser
+import os
+from subprocess import Popen, PIPE
+
+remmina_dir = os.path.expanduser("~/.local/share/remmina")
+
+fdict = dict()
+
+for f in os.listdir(remmina_dir):
+ fp = os.path.join(remmina_dir, f)
+ c = ConfigParser.ConfigParser()
+ c.read(fp)
+ n = c.get('remmina', 'name')
+ fdict[n] = fp
+
+lines = max(min(15, len(fdict)), 1);
+width = len(max(fdict.keys(), key=len))
+rofi = Popen(["rofi", "-i", "-dmenu", \
+ "-l", str(lines), "-width", str(width), \
+ "-p", "connection"], stdout=PIPE, stdin=PIPE)
+selected = rofi.communicate("\n" \
+ .join(fdict.keys()) \
+ .encode("utf-8"))[0] \
+ .decode("utf-8") \
+ .strip()
+rofi.wait()
+
+r = Popen(["remmina", "-c", fdict[selected]])
+r.wait()
#+end_src
** s (run sway)
projects / ~bandali / configs / blobdiff