+** sway
+:PROPERTIES:
+:header-args+: :tangle ~/.config/sway/config
+:END:
+
+#+begin_src conf
+exec xrdb .Xresources
+exec dunst
+### Variables
+# super
+set $mod Mod4
+# alt
+set $mod2 Mod1
+set $left h
+set $down j
+set $up k
+set $right l
+set $term urxvt
+set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
+
+### Output configuration
+#
+# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
+output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
+#
+# Example configuration:
+#
+# output HDMI-A-1 resolution 1920x1080 position 1920,0
+#
+# You can get the names of your outputs by running: swaymsg -t get_outputs
+
+### Idle configuration
+#
+# Example configuration:
+#
+#exec swayidle \
+# timeout 300 'swaylock -c 000000' \
+# timeout 600 'swaymsg "output * dpms off"' \
+# resume 'swaymsg "output * dpms on"' \
+# before-sleep 'swaylock -c 000000'
+#
+# This will lock your screen after 300 seconds of inactivity, then turn off
+# your displays after another 600 seconds, and turn your screens back on when
+# resumed. It will also lock your screen before your computer goes to sleep.
+
+### Input configuration
+
+input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
+ dwt enabled
+ tap enabled
+ natural_scroll enabled
+ middle_emulation enabled
+ click_method clickfinger
+}
+
+input "1:1:AT_Translated_Set_2_keyboard" {
+ repeat_delay 200
+ repeat_rate 45
+ xkb_layout us,ir
+ xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
+}
+
+
+### Key bindings
+#
+# Basics:
+#
+ # start a terminal
+ bindsym $mod+Return exec $term
+
+ # kill focused window
+ bindsym $mod+Shift+q kill
+
+ # start your launcher
+ bindsym $mod+d exec $menu
+
+ # password manager
+ bindsym $mod2+space exec rofi-pass
+
+ # Drag floating windows by holding down $mod and left mouse button.
+ # Resize them with right mouse button + $mod.
+ # Despite the name, also works for non-floating windows.
+ # Change normal to inverse to use left mouse button for resizing and right
+ # mouse button for dragging.
+ floating_modifier $mod normal
+
+ # reload the configuration file
+ bindsym $mod+Shift+c reload
+
+ # exit sway (logs you out of your wayland session)
+ bindsym $mod+Shift+e exit
+
+ bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
+ bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
+ bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
+
+ bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
+ bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
+ bindsym XF86AudioMute exec pamixer --toggle-mute
+ bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
+
+ # original sway workspace switch and window move
+ bindsym $mod+bracketleft workspace prev
+ bindsym $mod+bracketright workspace next
+ bindsym $mod+braceleft move container to workspace prev
+ bindsym $mod+braceright move container to workspace next
+
+ # bspwm-esque workspace switch and window move
+ bindsym $mod2+bracketleft exec sway-ws-util switch prev
+ bindsym $mod2+bracketright exec sway-ws-util switch next
+ bindsym $mod2+braceleft exec sway-ws-util move prev follow
+ bindsym $mod2+braceright exec sway-ws-util move next follow
+#
+# Moving around:
+#
+ # Move your focus around
+ bindsym $mod+$left focus left
+ bindsym $mod+$down focus down
+ bindsym $mod+$up focus up
+ bindsym $mod+$right focus right
+ # or use $mod+[up|down|left|right]
+ bindsym $mod+Left focus left
+ bindsym $mod+Down focus down
+ bindsym $mod+Up focus up
+ bindsym $mod+Right focus right
+
+ # _move_ the focused window with the same, but add Shift
+ bindsym $mod+Shift+$left move left
+ bindsym $mod+Shift+$down move down
+ bindsym $mod+Shift+$up move up
+ bindsym $mod+Shift+$right move right
+ # ditto, with arrow keys
+ bindsym $mod+Shift+Left move left
+ bindsym $mod+Shift+Down move down
+ bindsym $mod+Shift+Up move up
+ bindsym $mod+Shift+Right move right
+#
+# Workspaces:
+#
+ # switch to workspace
+ bindsym $mod+1 workspace 1
+ bindsym $mod+2 workspace 2
+ bindsym $mod+3 workspace 3
+ bindsym $mod+4 workspace 4
+ bindsym $mod+5 workspace 5
+ bindsym $mod+6 workspace 6
+ bindsym $mod+7 workspace 7
+ bindsym $mod+8 workspace 8
+ bindsym $mod+9 workspace 9
+ bindsym $mod+0 workspace 10
+ # move focused container to workspace
+ bindsym $mod+Shift+1 move container to workspace 1
+ bindsym $mod+Shift+2 move container to workspace 2
+ bindsym $mod+Shift+3 move container to workspace 3
+ bindsym $mod+Shift+4 move container to workspace 4
+ bindsym $mod+Shift+5 move container to workspace 5
+ bindsym $mod+Shift+6 move container to workspace 6
+ bindsym $mod+Shift+7 move container to workspace 7
+ bindsym $mod+Shift+8 move container to workspace 8
+ bindsym $mod+Shift+9 move container to workspace 9
+ bindsym $mod+Shift+0 move container to workspace 10
+ # Note: workspaces can have any name you want, not just numbers.
+ # We just use 1-10 as the default.
+#
+# Layout stuff:
+#
+ # You can "split" the current object of your focus with
+ # $mod+b or $mod+v, for horizontal and vertical splits
+ # respectively.
+ bindsym $mod+b splith
+ bindsym $mod+v splitv
+
+ # Switch the current container between different layout styles
+ bindsym $mod+s layout stacking
+ bindsym $mod+w layout tabbed
+ bindsym $mod+e layout toggle split
+
+ # Make the current focus fullscreen
+ bindsym $mod+f fullscreen
+
+ # Toggle the current focus between tiling and floating mode
+ bindsym $mod+Shift+space floating toggle
+
+ # Swap focus between the tiling area and the floating area
+ bindsym $mod+space focus mode_toggle
+
+ # move focus to the parent container
+ bindsym $mod+a focus parent
+#
+# Scratchpad:
+#
+ # Sway has a "scratchpad", which is a bag of holding for windows.
+ # You can send windows there and get them back later.
+
+ # Move the currently focused window to the scratchpad
+ bindsym $mod+Shift+minus move scratchpad
+
+ # Show the next scratchpad window or hide the focused scratchpad window.
+ # If there are multiple scratchpad windows, this command cycles through them.
+ bindsym $mod+minus scratchpad show
+#
+# Resizing containers:
+#
+mode "resize" {
+ # left will shrink the containers width
+ # right will grow the containers width
+ # up will shrink the containers height
+ # down will grow the containers height
+ bindsym $left resize shrink width 10px
+ bindsym $down resize grow height 10px
+ bindsym $up resize shrink height 10px
+ bindsym $right resize grow width 10px
+
+ # ditto, with arrow keys
+ bindsym Left resize shrink width 10px
+ bindsym Down resize grow height 10px
+ bindsym Up resize shrink height 10px
+ bindsym Right resize grow width 10px
+
+ # return to default mode
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+}
+bindsym $mod+Shift+r mode "resize"
+
+#
+# Status Bar:
+#
+# Read `man 5 sway-bar` for more information about this section.
+bar {
+ position bottom
+ colors {
+ statusline #ffffff
+ background #323232
+ inactive_workspace #32323200 #32323200 #5c5c5c
+ }
+ status_command i3status
+}
+
+include /etc/sway/config.d/*
+#+end_src
+
+** TLP
+
+*** langa
+
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power saving
+# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
+
+# Hint: some features are disabled by default, remove the leading # to enable
+# them.
+
+# Set to 0 to disable, 1 to enable TLP.
+TLP_ENABLE=1
+
+# Operation mode when no power supply can be detected: AC, BAT.
+# Concerns some desktop and embedded hardware only.
+TLP_DEFAULT_MODE=AC
+
+# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
+# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
+TLP_PERSISTENT_DEFAULT=0
+
+# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Hint: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel default values are used.
+
+# Select a CPU frequency scaling governor.
+# Intel Core i processor with intel_pstate driver:
+# powersave(*), performance.
+# Older hardware with acpi-cpufreq driver:
+# ondemand(*), powersave, performance, conservative, schedutil.
+# (*) is recommended.
+# Hint: use tlp-stat -p to show the active driver and available governors.
+# Important:
+# powersave for intel_pstate and ondemand for acpi-cpufreq are power
+# efficient for *almost all* workloads and therefore kernel and most
+# distributions have chosen them as defaults. If you still want to change,
+# you should know what you're doing! You *must* disable your distribution's
+# governor settings or conflicts will occur.
+#CPU_SCALING_GOVERNOR_ON_AC=powersave
+#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your CPU. For available frequencies see
+# the output of tlp-stat -p.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set energy performance hints (HWP) for Intel P-state governor:
+# performance, balance_performance, default, balance_power, power
+# Values are given in order of increasing power saving.
+# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
+CPU_HWP_ON_AC=balance_performance
+CPU_HWP_ON_BAT=balance_power
+
+# Set Intel P-state performance: 0..100 (%).
+# Limit the max/min P-state to control the power dissipation of the CPU.
+# Values are stated as a percentage of the available performance.
+# Requires an Intel Core i processor with intel_pstate driver.
+#CPU_MIN_PERF_ON_AC=0
+#CPU_MAX_PERF_ON_AC=100
+#CPU_MIN_PERF_ON_BAT=0
+#CPU_MAX_PERF_ON_BAT=30
+
+# Set the CPU "turbo boost" feature: 0=disable, 1=allow
+# Requires an Intel Core i processor.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used CPU cores/hyper-threads under light load conditions:
+# 0=disable, 1=enable.
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog:
+# 0=disable (default, saves power), 1=enable (for kernel debugging only).
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
+# Frequency voltage pairs are written to:
+# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Set CPU performance versus energy savings policy:
+# performance, balance-performance, default, balance-power, power.
+# Values are given in order of increasing power saving.
+# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
+ENERGY_PERF_POLICY_ON_AC=performance
+ENERGY_PERF_POLICY_ON_BAT=balance-power
+
+# Disk devices; separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk ID also (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Disk advanced power management level: 1..254, 255 (max saving, min, off).
+# Levels 1..127 may spin down the disk; 255 allowable on most drives.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="128 128"
+
+# Hard disk spin down timeout:
+# 0: spin down disabled
+# 1..240: timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# See 'man hdparm' for details.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the kernel default scheduler for the particular disk.
+#DISK_IOSCHED="cfq cfq"
+
+# AHCI link power management (ALPM) for disk devices:
+# min_power, med_power_with_dipm(*), medium_power, max_performance.
+# (*) Kernel >= 4.15 required, then recommended.
+# Multiple values separated with spaces are tried sequentially until success.
+SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
+SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
+
+# Exclude host devices from AHCI link power management.
+# Separate multiple hosts with spaces.
+#SATA_LINKPWR_BLACKLIST="host1"
+
+# Runtime Power Management for AHCI host and disks devices:
+# on=disable, auto=enable.
+# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+#AHCI_RUNTIME_PM_ON_AC=on
+#AHCI_RUNTIME_PM_ON_BAT=on
+
+# Seconds of inactivity before disk is suspended.
+AHCI_RUNTIME_PM_TIMEOUT=15
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default, performance, powersave.
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
+# auto = mid on BAT, high on AC; default = use hardware defaults.
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# Radeon dynamic power management method (DPM): battery, performance.
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# Radeon DPM performance level: auto, low, high; auto is recommended.
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
+WIFI_PWR_ON_AC=off
+WIFI_PWR_ON_BAT=on
+
+# Disable wake on LAN: Y/N.
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables, >=1 enables power saving (recommended: 1).
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=0
+
+# Disable controller too (HDA only): Y/N.
+SOUND_POWER_SAVE_CONTROLLER=N
+
+# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
+# Drive can be powered on again by releasing (and reinserting) the eject lever
+# or by pressing the disc eject button on newer models.
+# Note: an UltraBay/MediaBay hard disk is never powered off.
+BAY_POWEROFF_ON_AC=0
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0).
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Exclude PCI(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+
+# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
+# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
+# prevents accidential power-on of dGPU in hybrid graphics setups.
+# Use "" to disable the feature completely.
+# Separate multiple drivers with spaces.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
+
+# Set to 0 to disable, 1 to enable USB autosuspend feature.
+USB_AUTOSUSPEND=1
+
+# Exclude listed devices from USB autosuspend (separate with spaces).
+# Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# Bluetooth devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_BTUSB=0
+
+# Phone devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude (enable charging).
+USB_BLACKLIST_PHONE=0
+
+# Printers are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_PRINTER=1
+
+# WWAN devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_WWAN=1
+
+# Include listed devices into USB autosuspend even if already excluded
+# by the blacklists above (separate with spaces).
+# Use lsusb to get the ids.
+#USB_WHITELIST="1111:2222 3333:4444"
+
+# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
+# (workaround for USB devices that cause shutdown problems).
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
+
+# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
+# on system startup: 0=disable, 1=enable.
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+# are ignored when this is enabled!
+#RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=1
+
+# Radio devices to disable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+
+# Radio devices to enable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
+
+# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
+# (workaround for devices that are blocking shutdown).
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
+
+# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
+# (to prevent other operating systems from missing radios).
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
+
+# Radio devices to enable on AC: bluetooth, wifi, wwan.
+#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
+
+# Radio devices to disable on battery: bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
+
+# Radio devices to disable on battery when not in use (not connected):
+# bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
+
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
+# required). Charging starts when the remaining capacity falls below the
+# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
+# Main / Internal battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay / Slice / Replaceable battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
+
+# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
+#RESTORE_THRESHOLDS_ON_BAT=1
+
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth, wifi, wwan.
+
+# Hints:
+# - Parameters are disabled by default, remove the leading # to enable them
+# - Separate multiple radio devices with spaces
+
+# Radio devices to disable on connect.
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
+
+# Radio devices to enable on disconnect.
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
+
+# Radio devices to enable/disable when docked.
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked.
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+#+end_src
+
+*** pary
+
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "pary")) "/sudo::/etc/default/tlp")
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power saving
+# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
+
+# Hint: some features are disabled by default, remove the leading # to enable
+# them.
+
+# Set to 0 to disable, 1 to enable TLP.
+TLP_ENABLE=1
+
+# Operation mode when no power supply can be detected: AC, BAT.
+# Concerns some desktop and embedded hardware only.
+TLP_DEFAULT_MODE=AC
+
+# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
+# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
+TLP_PERSISTENT_DEFAULT=0
+
+# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Hint: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel default values are used.
+
+# Select a CPU frequency scaling governor.
+# Intel Core i processor with intel_pstate driver:
+# powersave(*), performance.
+# Older hardware with acpi-cpufreq driver:
+# ondemand(*), powersave, performance, conservative, schedutil.
+# (*) is recommended.
+# Hint: use tlp-stat -p to show the active driver and available governors.
+# Important:
+# powersave for intel_pstate and ondemand for acpi-cpufreq are power
+# efficient for *almost all* workloads and therefore kernel and most
+# distributions have chosen them as defaults. If you still want to change,
+# you should know what you're doing! You *must* disable your distribution's
+# governor settings or conflicts will occur.
+#CPU_SCALING_GOVERNOR_ON_AC=powersave
+#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your CPU. For available frequencies see
+# the output of tlp-stat -p.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set energy performance hints (HWP) for Intel P-state governor:
+# performance, balance_performance, default, balance_power, power
+# Values are given in order of increasing power saving.
+# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
+CPU_HWP_ON_AC=balance_performance
+CPU_HWP_ON_BAT=balance_power
+
+# Set Intel P-state performance: 0..100 (%).
+# Limit the max/min P-state to control the power dissipation of the CPU.
+# Values are stated as a percentage of the available performance.
+# Requires an Intel Core i processor with intel_pstate driver.
+#CPU_MIN_PERF_ON_AC=0
+#CPU_MAX_PERF_ON_AC=100
+#CPU_MIN_PERF_ON_BAT=0
+#CPU_MAX_PERF_ON_BAT=30
+
+# Set the CPU "turbo boost" feature: 0=disable, 1=allow
+# Requires an Intel Core i processor.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used CPU cores/hyper-threads under light load conditions:
+# 0=disable, 1=enable.
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog:
+# 0=disable (default, saves power), 1=enable (for kernel debugging only).
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
+# Frequency voltage pairs are written to:
+# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Set CPU performance versus energy savings policy:
+# performance, balance-performance, default, balance-power, power.
+# Values are given in order of increasing power saving.
+# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
+ENERGY_PERF_POLICY_ON_AC=performance
+ENERGY_PERF_POLICY_ON_BAT=balance-power
+
+# Disk devices; separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk ID also (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Disk advanced power management level: 1..254, 255 (max saving, min, off).
+# Levels 1..127 may spin down the disk; 255 allowable on most drives.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="128 128"
+
+# Hard disk spin down timeout:
+# 0: spin down disabled
+# 1..240: timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# See 'man hdparm' for details.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the kernel default scheduler for the particular disk.
+#DISK_IOSCHED="cfq cfq"
+
+# AHCI link power management (ALPM) for disk devices:
+# min_power, med_power_with_dipm(*), medium_power, max_performance.
+# (*) Kernel >= 4.15 required, then recommended.
+# Multiple values separated with spaces are tried sequentially until success.
+SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
+SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
+
+# Exclude host devices from AHCI link power management.
+# Separate multiple hosts with spaces.
+#SATA_LINKPWR_BLACKLIST="host1"
+
+# Runtime Power Management for AHCI host and disks devices:
+# on=disable, auto=enable.
+# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+#AHCI_RUNTIME_PM_ON_AC=on
+#AHCI_RUNTIME_PM_ON_BAT=on
+
+# Seconds of inactivity before disk is suspended.
+AHCI_RUNTIME_PM_TIMEOUT=15
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default, performance, powersave.
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
+# auto = mid on BAT, high on AC; default = use hardware defaults.
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# Radeon dynamic power management method (DPM): battery, performance.
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# Radeon DPM performance level: auto, low, high; auto is recommended.
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
+WIFI_PWR_ON_AC=off
+WIFI_PWR_ON_BAT=on
+
+# Disable wake on LAN: Y/N.
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables, >=1 enables power saving (recommended: 1).
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=0
+
+# Disable controller too (HDA only): Y/N.
+SOUND_POWER_SAVE_CONTROLLER=N
+
+# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
+# Drive can be powered on again by releasing (and reinserting) the eject lever
+# or by pressing the disc eject button on newer models.
+# Note: an UltraBay/MediaBay hard disk is never powered off.
+BAY_POWEROFF_ON_AC=0
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0).
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Exclude PCI(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+RUNTIME_PM_BLACKLIST="01:00.0"
+
+# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
+# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
+# prevents accidential power-on of dGPU in hybrid graphics setups.
+# Use "" to disable the feature completely.
+# Separate multiple drivers with spaces.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
+
+# Set to 0 to disable, 1 to enable USB autosuspend feature.
+USB_AUTOSUSPEND=1
+
+# Exclude listed devices from USB autosuspend (separate with spaces).
+# Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# Bluetooth devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_BTUSB=0
+
+# Phone devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude (enable charging).
+USB_BLACKLIST_PHONE=0
+
+# Printers are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_PRINTER=1
+
+# WWAN devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_WWAN=1
+
+# Include listed devices into USB autosuspend even if already excluded
+# by the blacklists above (separate with spaces).
+# Use lsusb to get the ids.
+#USB_WHITELIST="1111:2222 3333:4444"
+
+# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
+# (workaround for USB devices that cause shutdown problems).
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
+
+# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
+# on system startup: 0=disable, 1=enable.
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+# are ignored when this is enabled!
+#RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=1
+
+# Radio devices to disable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+
+# Radio devices to enable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
+
+# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
+# (workaround for devices that are blocking shutdown).
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
+
+# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
+# (to prevent other operating systems from missing radios).
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
+
+# Radio devices to enable on AC: bluetooth, wifi, wwan.
+#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
+
+# Radio devices to disable on battery: bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
+
+# Radio devices to disable on battery when not in use (not connected):
+# bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
+
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
+# required). Charging starts when the remaining capacity falls below the
+# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
+# Main / Internal battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay / Slice / Replaceable battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
+
+# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
+#RESTORE_THRESHOLDS_ON_BAT=1
+
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth, wifi, wwan.
+
+# Hints:
+# - Parameters are disabled by default, remove the leading # to enable them
+# - Separate multiple radio devices with spaces
+
+# Radio devices to disable on connect.
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
+
+# Radio devices to enable on disconnect.
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
+
+# Radio devices to enable/disable when docked.
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked.
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+#+end_src
+
+** X
+
+*** xprofile
+:PROPERTIES:
+:header-args+: :tangle ~/.xprofile
+:END:
+
+=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
+contrary, it's automatically sourced by LightDM, my display manager of
+choice.
+
+#+begin_src sh :tangle no
+xset -b # disable bell
+xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
+
+# setxkbmap -option compose:ralt
+
+setxkbmap -option ctrl:nocaps # turn capslock into control
+setxkbmap -option altwin:swap_alt_win # swap alt and super
+
+if [ $(hostname) = "plasma" ]
+then
+ setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
+fi
+
+if [ $(hostname) = "enigma" ]
+then
+ xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
+fi
+
+light -Scrs "intel_backlight" 2
+
+source $HOME/.zprofile
+
+export _JAVA_AWT_WM_NONREPARENTING=1
+export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
+
+if [ $(hostname) = "plasma" ]
+then
+ unlock-def-gk.py &
+fi
+
+bspwm &
+#+end_src
+
+*** X resources
+
+**** Xresources
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
+:END:
+
+#+begin_src conf-xdefaults
+#include ".Xresources.d/fonts"
+! #include ".Xresources.d/colors"
+#include ".Xresources.d/emacs"
+#include ".Xresources.d/rxvt-unicode"
+#+end_src
+
+**** Xresources.d
+
+***** fonts
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
+:END:
+
+#+begin_src conf-xdefaults
+Xft.lcdfilter: lcddefault
+Xft.antialias: true
+Xft.autohint: 0
+Xft.hinting: true
+Xft.hintstyle: hintslight
+! Xft.hintstyle: hintfull
+Xft.rgba: rgb
+Xft.dpi: 96
+#+end_src
+
+***** colors
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
+:END:
+
+#+begin_src conf-xdefaults :tangle no
+#include "gruvbox-light.xresources"
+! #include "gruvbox-dark.xresources"
+#include "gruvbox-urxvt256.xresources"
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-light.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 6 Sep 2014
+! -----------------------------------------------------------------------------
+
+! hard contrast: *background: #f9f5d7
+*background: #fbf1c7
+! soft contrast: *background: #f2e5bc
+*foreground: #3c3836
+! Black + DarkGrey
+*color0: #fdf4c1
+*color8: #928374
+! DarkRed + Red
+*color1: #cc241d
+*color9: #9d0006
+! DarkGreen + Green
+*color2: #98971a
+*color10: #79740e
+! DarkYellow + Yellow
+*color3: #d79921
+*color11: #b57614
+! DarkBlue + Blue
+*color4: #458588
+*color12: #076678
+! DarkMagenta + Magenta
+*color5: #b16286
+*color13: #8f3f71
+! DarkCyan + Cyan
+*color6: #689d6a
+*color14: #427b58
+! LightGrey + White
+*color7: #7c6f64
+*color15: #3c3836
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-dark.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 6 Sep 2014
+! -----------------------------------------------------------------------------
+
+! hard contrast: *background: #1d2021
+*background: #282828
+! soft contrast: *background: #32302f
+*foreground: #ebdbb2
+! Black + DarkGrey
+*color0: #282828
+*color8: #928374
+! DarkRed + Red
+*color1: #cc241d
+*color9: #fb4934
+! DarkGreen + Green
+*color2: #98971a
+*color10: #b8bb26
+! DarkYellow + Yellow
+*color3: #d79921
+*color11: #fabd2f
+! DarkBlue + Blue
+*color4: #458588
+*color12: #83a598
+! DarkMagenta + Magenta
+*color5: #b16286
+*color13: #d3869b
+! DarkCyan + Cyan
+*color6: #689d6a
+*color14: #8ec07c
+! LightGrey + White
+*color7: #a89984
+*color15: #ebdbb2
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-urxvt256.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 13 Dec 2013
+! -----------------------------------------------------------------------------
+
+URxvt.color24: #076678
+URxvt.color66: #427b58
+URxvt.color88: #9d0006
+URxvt.color96: #8f3f71
+URxvt.color100: #79740e
+URxvt.color108: #8ec07c
+URxvt.color109: #83a598
+URxvt.color130: #af3a03
+URxvt.color136: #b57614
+URxvt.color142: #b8bb26
+URxvt.color167: #fb4934
+URxvt.color175: #d3869b
+URxvt.color208: #fe8019
+URxvt.color214: #fabd2f
+URxvt.color223: #ebdbb2
+URxvt.color228: #f2e5bc
+URxvt.color229: #fbf1c7
+URxvt.color230: #f9f5d7
+URxvt.color234: #1d2021
+URxvt.color235: #282828
+URxvt.color236: #32302f
+URxvt.color237: #3c3836
+URxvt.color239: #504945
+URxvt.color241: #665c54
+URxvt.color243: #7c6f64
+URxvt.color244: #928374
+URxvt.color245: #928374
+URxvt.color246: #a89984
+URxvt.color248: #bdae93
+URxvt.color250: #d5c4a1
+#+end_src
+
+***** emacs
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
+:END:
+
+#+begin_src conf-xdefaults
+Emacs.menuBar: off
+Emacs.toolBar: off
+Emacs.verticalScrollBars: off
+Emacs.cursorBlink: off
+Emacs.FontBackend: xft,x
+! Emacs.font: Ubuntu Mono-12
+! Emacs.font: Triplicate T4C-11
+! Emacs.font: Ubuntu Mono-10.5
+! Emacs.font: Ubuntu Mono-12
+! Emacs.font: Iosevka-11
+
+! Emacs.font: Fira Mono:size=15
+! Emacs.font: DejaVu Sans Mono:size=15
+! Emacs.font: Inconsolata:size=17
+! Emacs.font: Inconsolata:size=16
+! Emacs.font: Inconsolata LGC:size=14
+! Emacs.font: Source Code Pro Medium-10.5
+Emacs.font: Ubuntu Mono:size=16
+! Emacs.font: Iosevka:size=16
+#+end_src
+
+***** rxvt-unicode
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
+:END:
+
+#+begin_src conf-xdefaults
+! Font
+URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
+URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
+URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
+URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
+
+URxvt.xftAntialias: true
+URxvt.letterSpace: 0
+
+URxvt.depth: 0
+URxvt.loginShell: true
+URxvt.saveLines: 100000
+URxvt.internalBorder: 3
+URxvt.lineSpace: 0
+URxvt.scrollBar: false
+URxvt.scrollStyle: rxvt
+URxvt*scrollTtyOutput: false
+URxvt*scrollWithBuffer: true
+URxvt*scrollTtyKeypress: true
+URxvt.keysym.Shift-Up: command:\033]720;1\007
+URxvt.keysym.Shift-Down: command:\033]721;1\007
+
+URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
+URxvt.perl-ext: bidi
+URxvt.bidi.enabled: 1
+URxvt.url-select.launcher: firefox
+URxvt.url-select.underline: true
+URxvt.keysym.M-u: perl:url-select:select_next
+URxvt.keysym.M-Escape: perl:keyboard-select:activate
+URxvt.keysym.M-s: perl:keyboard-select:search
+URxvt.url-launcher: /usr/bin/firefox
+URxvt.matcher.button: 1
+URxvt.iso14755: false
+URxvt.iso14755_53: false
+URxvt.keysym.M-c: perl:clipboard:copy
+URxvt.keysym.M-v: perl:clipboard:paste
+URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
+URxvt.keysym.C-Up: font-size:increase
+URxvt.keysym.C-Down: font-size:decrease
+URxvt.keysym.C-S-Up: font-size:incglobal
+URxvt.keysym.C-S-Down: font-size:decglobal
+URxvt.keysym.C-equal: font-size:reset
+!URxvt.keysym.C-question: font-size:show
+
+URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
+
+!urxvt*foreground: white
+!urxvt*background: black
+
+!*color0: #2E3436
+!*color1: #a40000
+!*color2: #4E9A06
+!*color3: #C4A000
+!*color4: #3465A4
+!*color5: #75507B
+!*color6: #ce5c00
+!*color7: #babdb9
+!*color8: #555753
+!*color9: #EF2929
+!*color10: #8AE234
+!*color11: #FCE94F
+!*color12: #729FCF
+!*color13: #AD7FA8
+!*color14: #fcaf3e
+!*color15: #EEEEEC
+
+!URxvt.foreground: #C8C8C8
+!URxvt.background: #FFFFFF
+
+!! black
+!*color0: #2E3436
+!*color8: #555753
+!! red
+!*color1: #a40000
+!*color9: #EF2929
+!! green
+!*color2: #4E9A06
+!*color10: #8AE234
+!! yellow
+!*color3: #C4A000
+!*color11: #FCE94F
+!! blue
+!*color4: #3465A4
+!*color12: #729FCF
+!! purple
+!*color5: #75507B
+!*color13: #AD7FA8
+!! orange (replaces cyan)
+!*color6: #ce5c00
+!*color14: #fcaf3e
+!! white
+!*color7: #babdb9
+!*color15: #EEEEEC
+
+! Tango colour theme for rxvt-unicode
+URxvt.background: #FFFFFF
+URxvt.foreground: #000000
+
+! Black
+URxvt.color0: #2E3436
+URxvt.color8: #757773
+
+! Red
+URxvt.color1: #CC0000
+URxvt.color9: #EF2929
+
+! Green
+URxvt.color2: #4E9A06
+URxvt.color10: #8AE234
+
+! Yellow
+URxvt.color3: #C4A000
+URxvt.color11: #FCE94F
+
+! Blue
+URxvt.color4: #3465A4
+URxvt.color12: #729FCF
+
+! Magenta
+URxvt.color5: #75507B
+URxvt.color13: #AD7FA8
+
+!! Cyan
+!URxvt.color6: #06989A
+!URxvt.color14: #34E2E2
+! orange (replaces cyan)
+*color6: #ce5c00
+*color14: #fcaf3e
+
+! White
+URxvt.color7: #D3D7CF
+URxvt.color15: #EEEEEC
+#+end_src
+
projects / ~bandali / configs / blobdiff