+++ /dev/null
-;; -*- mode: emacs-lisp -*-
-;; This file is loaded by Spacemacs at startup.
-;; It must be stored in your home directory.
-
-(defun dotspacemacs/layers ()
- "Configuration Layers declaration.
-You should not put any user code in this function besides modifying the variable
-values."
- (setq-default
- ;; Base distribution to use. This is a layer contained in the directory
- ;; `+distribution'. For now available distributions are `spacemacs-base'
- ;; or `spacemacs'. (default 'spacemacs)
- dotspacemacs-distribution 'spacemacs
- ;; Lazy installation of layers (i.e. layers are installed only when a file
- ;; with a supported type is opened). Possible values are `all', `unused'
- ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
- ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
- ;; lazy install any layer that support lazy installation even the layers
- ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
- ;; installation feature and you have to explicitly list a layer in the
- ;; variable `dotspacemacs-configuration-layers' to install it.
- ;; (default 'unused)
- dotspacemacs-enable-lazy-installation 'unused
- ;; If non-nil then Spacemacs will ask for confirmation before installing
- ;; a layer lazily. (default t)
- dotspacemacs-ask-for-lazy-installation t
- ;; If non-nil layers with lazy install support are lazy installed.
- ;; List of additional paths where to look for configuration layers.
- ;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
- dotspacemacs-configuration-layer-path '()
- ;; List of configuration layers to load.
- dotspacemacs-configuration-layers
- '(
- aminb
- auto-completion
- (better-defaults :variables
- better-defaults-move-to-beginning-of-code-first t
- better-defaults-move-to-end-of-code-first t)
- bibtex
- c-c++
- emacs-lisp
- git
- haskell
- html
- ;; idris
- ivy
- ;; javascript
- latex
- markdown
- org
- ;; python
- ;; racket
- ;; rust
- (shell :variables
- shell-default-height 30
- shell-default-position 'bottom)
- shell-scripts
- spell-checking
- syntax-checking
- ;; version-control
- ;; yaml
- )
- ;; List of additional packages that will be installed without being
- ;; wrapped in a layer. If you need some configuration for these
- ;; packages, then consider creating a layer. You can also put the
- ;; configuration in `dotspacemacs/user-config'.
- dotspacemacs-additional-packages '()
- ;; A list of packages that cannot be updated.
- dotspacemacs-frozen-packages '()
- ;; A list of packages that will not be installed and loaded.
- dotspacemacs-excluded-packages '()
- ;; Defines the behaviour of Spacemacs when installing packages.
- ;; Possible values are `used-only', `used-but-keep-unused' and `all'.
- ;; `used-only' installs only explicitly used packages and uninstall any
- ;; unused packages as well as their unused dependencies.
- ;; `used-but-keep-unused' installs only the used packages but won't uninstall
- ;; them if they become unused. `all' installs *all* packages supported by
- ;; Spacemacs and never uninstall them. (default is `used-only')
- dotspacemacs-install-packages 'used-only))
-
-(defun dotspacemacs/init ()
- "Initialization function.
-This function is called at the very startup of Spacemacs initialization
-before layers configuration.
-You should not put any user code in there besides modifying the variable
-values."
- ;; This setq-default sexp is an exhaustive list of all the supported
- ;; spacemacs settings.
- (setq-default
- ;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
- ;; possible. Set it to nil if you have no way to use HTTPS in your
- ;; environment, otherwise it is strongly recommended to let it set to t.
- ;; This variable has no effect if Emacs is launched with the parameter
- ;; `--insecure' which forces the value of this variable to nil.
- ;; (default t)
- dotspacemacs-elpa-https t
- ;; Maximum allowed time in seconds to contact an ELPA repository.
- dotspacemacs-elpa-timeout 5
- ;; If non-nil then spacemacs will check for updates at startup
- ;; when the current branch is not `develop'. Note that checking for
- ;; new versions works via git commands, thus it calls GitHub services
- ;; whenever you start Emacs. (default nil)
- dotspacemacs-check-for-update nil
- ;; If non-nil, a form that evaluates to a package directory. For example, to
- ;; use different package directories for different Emacs versions, set this
- ;; to `emacs-version'.
- dotspacemacs-elpa-subdirectory nil
- ;; One of `vim', `emacs' or `hybrid'.
- ;; `hybrid' is like `vim' except that `insert state' is replaced by the
- ;; `hybrid state' with `emacs' key bindings. The value can also be a list
- ;; with `:variables' keyword (similar to layers). Check the editing styles
- ;; section of the documentation for details on available variables.
- ;; (default 'vim)
- dotspacemacs-editing-style 'emacs
- ;; If non-nil output loading progress in `*Messages*' buffer. (default nil)
- dotspacemacs-verbose-loading nil
- ;; Specify the startup banner. Default value is `official', it displays
- ;; the official spacemacs logo. An integer value is the index of text
- ;; banner, `random' chooses a random text banner in `core/banners'
- ;; directory. A string value must be a path to an image format supported
- ;; by your Emacs build.
- ;; If the value is nil then no banner is displayed. (default 'official)
- dotspacemacs-startup-banner 'official
- ;; List of items to show in startup buffer or an association list of
- ;; the form `(list-type . list-size)`. If nil then it is disabled.
- ;; Possible values for list-type are:
- ;; `recents' `bookmarks' `projects' `agenda' `todos'."
- ;; List sizes may be nil, in which case
- ;; `spacemacs-buffer-startup-lists-length' takes effect.
- dotspacemacs-startup-lists '((recents . 5)
- (projects . 7))
- ;; True if the home buffer should respond to resize events.
- dotspacemacs-startup-buffer-responsive t
- ;; Default major mode of the scratch buffer (default `text-mode')
- dotspacemacs-scratch-mode 'text-mode
- ;; List of themes, the first of the list is loaded when spacemacs starts.
- ;; Press <SPC> T n to cycle to the next theme in the list (works great
- ;; with 2 themes variants, one dark and one light)
- dotspacemacs-themes '(spacemacs-dark
- spacemacs-light)
- ;; If non-nil the cursor color matches the state color in GUI Emacs.
- dotspacemacs-colorize-cursor-according-to-state t
- ;; Default font, or prioritized list of fonts. `powerline-scale' allows to
- ;; quickly tweak the mode-line size to make separators look not too crappy.
- dotspacemacs-default-font '("Inconsolata"
- :size 15
- :weight normal
- :width normal
- :powerline-scale 1.6)
- ;; The leader key
- dotspacemacs-leader-key "SPC"
- ;; The key used for Emacs commands (M-x) (after pressing on the leader key).
- ;; (default "SPC")
- dotspacemacs-emacs-command-key "SPC"
- ;; The key used for Vim Ex commands (default ":")
- dotspacemacs-ex-command-key ":"
- ;; The leader key accessible in `emacs state' and `insert state'
- ;; (default "M-m")
- dotspacemacs-emacs-leader-key "S-SPC"
- ;; Major mode leader key is a shortcut key which is the equivalent of
- ;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
- dotspacemacs-major-mode-leader-key ","
- ;; Major mode leader key accessible in `emacs state' and `insert state'.
- ;; (default "C-M-m")
- dotspacemacs-major-mode-emacs-leader-key "M-SPC"
- ;; These variables control whether separate commands are bound in the GUI to
- ;; the key pairs C-i, TAB and C-m, RET.
- ;; Setting it to a non-nil value, allows for separate commands under <C-i>
- ;; and TAB or <C-m> and RET.
- ;; In the terminal, these pairs are generally indistinguishable, so this only
- ;; works in the GUI. (default nil)
- dotspacemacs-distinguish-gui-tab nil
- ;; If non-nil `Y' is remapped to `y$' in Evil states. (default nil)
- dotspacemacs-remap-Y-to-y$ nil
- ;; If non-nil, the shift mappings `<' and `>' retain visual state if used
- ;; there. (default t)
- dotspacemacs-retain-visual-state-on-shift t
- ;; If non-nil, J and K move lines up and down when in visual mode.
- ;; (default nil)
- dotspacemacs-visual-line-move-text nil
- ;; If non-nil, inverse the meaning of `g' in `:substitute' Evil ex-command.
- ;; (default nil)
- dotspacemacs-ex-substitute-global nil
- ;; Name of the default layout (default "Default")
- dotspacemacs-default-layout-name "Default"
- ;; If non-nil the default layout name is displayed in the mode-line.
- ;; (default nil)
- dotspacemacs-display-default-layout nil
- ;; If non-nil then the last auto saved layouts are resume automatically upon
- ;; start. (default nil)
- dotspacemacs-auto-resume-layouts nil
- ;; Size (in MB) above which spacemacs will prompt to open the large file
- ;; literally to avoid performance issues. Opening a file literally means that
- ;; no major mode or minor modes are active. (default is 1)
- dotspacemacs-large-file-size 1
- ;; Location where to auto-save files. Possible values are `original' to
- ;; auto-save the file in-place, `cache' to auto-save the file to another
- ;; file stored in the cache directory and `nil' to disable auto-saving.
- ;; (default 'cache)
- dotspacemacs-auto-save-file-location 'cache
- ;; Maximum number of rollback slots to keep in the cache. (default 5)
- dotspacemacs-max-rollback-slots 5
- ;; If non-nil, `helm' will try to minimize the space it uses. (default nil)
- dotspacemacs-helm-resize nil
- ;; if non-nil, the helm header is hidden when there is only one source.
- ;; (default nil)
- dotspacemacs-helm-no-header nil
- ;; define the position to display `helm', options are `bottom', `top',
- ;; `left', or `right'. (default 'bottom)
- dotspacemacs-helm-position 'bottom
- ;; Controls fuzzy matching in helm. If set to `always', force fuzzy matching
- ;; in all non-asynchronous sources. If set to `source', preserve individual
- ;; source settings. Else, disable fuzzy matching in all sources.
- ;; (default 'always)
- dotspacemacs-helm-use-fuzzy 'always
- ;; If non-nil the paste micro-state is enabled. When enabled pressing `p`
- ;; several times cycle between the kill ring content. (default nil)
- dotspacemacs-enable-paste-transient-state nil
- ;; Which-key delay in seconds. The which-key buffer is the popup listing
- ;; the commands bound to the current keystroke sequence. (default 0.4)
- dotspacemacs-which-key-delay 0.4
- ;; Which-key frame position. Possible values are `right', `bottom' and
- ;; `right-then-bottom'. right-then-bottom tries to display the frame to the
- ;; right; if there is insufficient space it displays it at the bottom.
- ;; (default 'bottom)
- dotspacemacs-which-key-position 'bottom
- ;; Control where `switch-to-buffer' displays the buffer. If nil,
- ;; `switch-to-buffer' displays the buffer in the current window even if
- ;; another same-purpose window is available. If non-nil, `switch-to-buffer'
- ;; displays the buffer in a same-purpose window even if the buffer can be
- ;; displayed in the current window. (default nil)
- dotspacemacs-switch-to-buffer-prefers-purpose nil
- ;; If non-nil a progress bar is displayed when spacemacs is loading. This
- ;; may increase the boot time on some systems and emacs builds, set it to
- ;; nil to boost the loading time. (default t)
- dotspacemacs-loading-progress-bar t
- ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
- ;; (Emacs 24.4+ only)
- dotspacemacs-fullscreen-at-startup nil
- ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
- ;; Use to disable fullscreen animations in OSX. (default nil)
- dotspacemacs-fullscreen-use-non-native nil
- ;; If non-nil the frame is maximized when Emacs starts up.
- ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
- ;; (default nil) (Emacs 24.4+ only)
- dotspacemacs-maximized-at-startup nil
- ;; A value from the range (0..100), in increasing opacity, which describes
- ;; the transparency level of a frame when it's active or selected.
- ;; Transparency can be toggled through `toggle-transparency'. (default 90)
- dotspacemacs-active-transparency 90
- ;; A value from the range (0..100), in increasing opacity, which describes
- ;; the transparency level of a frame when it's inactive or deselected.
- ;; Transparency can be toggled through `toggle-transparency'. (default 90)
- dotspacemacs-inactive-transparency 90
- ;; If non-nil show the titles of transient states. (default t)
- dotspacemacs-show-transient-state-title t
- ;; If non-nil show the color guide hint for transient state keys. (default t)
- dotspacemacs-show-transient-state-color-guide t
- ;; If non-nil unicode symbols are displayed in the mode line. (default t)
- dotspacemacs-mode-line-unicode-symbols t
- ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
- ;; scrolling overrides the default behavior of Emacs which recenters point
- ;; when it reaches the top or bottom of the screen. (default t)
- dotspacemacs-smooth-scrolling t
- ;; If non-nil line numbers are turned on in all `prog-mode' and `text-mode'
- ;; derivatives. If set to `relative', also turns on relative line numbers.
- ;; (default nil)
- dotspacemacs-line-numbers nil
- ;; Code folding method. Possible values are `evil' and `origami'.
- ;; (default 'evil)
- dotspacemacs-folding-method 'evil
- ;; If non-nil smartparens-strict-mode will be enabled in programming modes.
- ;; (default nil)
- dotspacemacs-smartparens-strict-mode nil
- ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
- ;; over any automatically added closing parenthesis, bracket, quote, etc…
- ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
- dotspacemacs-smart-closing-parenthesis nil
- ;; Select a scope to highlight delimiters. Possible values are `any',
- ;; `current', `all' or `nil'. Default is `all' (highlight any scope and
- ;; emphasis the current one). (default 'all)
- dotspacemacs-highlight-delimiters 'all
- ;; If non-nil, advise quit functions to keep server open when quitting.
- ;; (default nil)
- dotspacemacs-persistent-server nil
- ;; List of search tool executable names. Spacemacs uses the first installed
- ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
- ;; (default '("rg" "ag" "pt" "ack" "grep"))
- dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
- ;; The default package repository used if no explicit repository has been
- ;; specified with an installed package.
- ;; Not used for now. (default nil)
- dotspacemacs-default-package-repository nil
- ;; Delete whitespace while saving buffer. Possible values are `all'
- ;; to aggressively delete empty line and long sequences of whitespace,
- ;; `trailing' to delete only the whitespace at end of lines, `changed'to
- ;; delete only whitespace for changed lines or `nil' to disable cleanup.
- ;; (default nil)
- dotspacemacs-whitespace-cleanup nil
- ))
-
-(defun dotspacemacs/user-init ()
- "Initialization function for user code.
-It is called immediately after `dotspacemacs/init', before layer configuration
-executes.
- This function is mostly useful for variables that need to be set
-before packages are loaded. If you are unsure, you should try in setting them in
-`dotspacemacs/user-config' first."
- )
-
-(defun dotspacemacs/user-config ()
- "Configuration function for user code.
-This function is called at the very end of Spacemacs initialization after
-layers configuration.
-This is the place where most of your configurations should be done. Unless it is
-explicitly specified that a variable should be set before a package is loaded,
-you should place your code here."
-
- (setq powerline-default-separator 'slant)
-
- ;; (setq magit-commit-arguments '("--signoff"
- ;; "--gpg-sign=4E05246AB0BF7FFB"))
-
- (setq undo-tree-auto-save-history t
- undo-tree-history-directory-alist
- `(("." . ,(concat spacemacs-cache-directory "undo"))))
- (unless (file-exists-p (concat spacemacs-cache-directory "undo"))
- (make-directory (concat spacemacs-cache-directory "undo")))
-
- ;; Use pdflatex instead of latex
- (setq TeX-PDF-mode t
- TeX-engine 'xetex)
-
- ;; Support zathura in TeX mode
- (setq TeX-view-program-selection
- '(((output-dvi style-pstricks)
- "dvips and gv")
- (output-dvi "xdvi")
- (output-pdf "zathura")
- (output-html "xdg-open")))
- (setq TeX-view-program-list
- '(("zathura"
- ("zathura" (mode-io-correlate "-sync.sh")
- " "
- (mode-io-correlate "%n:1:%t ")
- "%o"))))
-
- ;; Swap : and ;
- ;; (define-key evil-motion-state-map ";" 'evil-ex)
- ;; (define-key evil-motion-state-map ":" 'evil-repeat-find-char)
-
- ;; Set the erc nick completion postfix to ", "
- ;; (setq erc-pcomplete-nick-postfix ", ")
- )
-
-;; Do not write anything past this comment. This is where Emacs will
-;; auto-generate custom variable definitions.
-(defun dotspacemacs/emacs-custom-settings ()
- "Emacs custom settings.
-This is an auto-generated function, do not modify its content directly, use
-Emacs customize menu instead.
-This function is called at the very end of Spacemacs initialization."
-(custom-set-variables
- ;; custom-set-variables was added by Custom.
- ;; If you edit it by hand, you could mess it up, so be careful.
- ;; Your init file should contain only one such instance.
- ;; If there is more than one, they won't work right.
- '(package-selected-packages
- (quote
- (web-mode web-beautify tagedit slim-mode scss-mode sass-mode pug-mode org-ref key-chord livid-mode skewer-mode simple-httpd less-css-mode json-mode json-snatcher json-reformat js2-refactor multiple-cursors js2-mode js-doc insert-shebang helm-bibtex parsebib haml-mode fish-mode emmet-mode disaster company-web web-completion-data company-tern dash-functional tern company-shell company-c-headers coffee-mode cmake-mode clang-format biblio biblio-core xterm-color ws-butler writeroom-mode window-numbering which-key wgrep volatile-highlights vi-tilde-fringe uuidgen use-package toc-org spacemacs-theme spaceline smex smeargle shell-pop restart-emacs request rainbow-delimiters quelpa popwin persp-mode pcre2el paradox orgit org-projectile org-present org-pomodoro org-plus-contrib org-download org-bullets open-junk-file neotree mwim multi-term move-text mmm-mode markdown-toc magit-gitflow macrostep lorem-ipsum linum-relative link-hint ivy-purpose ivy-hydra intero info+ indent-guide ido-vertical-mode hungry-delete htmlize hlint-refactor hl-todo hindent highlight-parentheses highlight-numbers highlight-indentation hide-comnt help-fns+ helm-make haskell-snippets google-translate golden-ratio gnuplot gitignore-mode gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link gh-md flyspell-correct-ivy flycheck-pos-tip flycheck-haskell flx-ido fill-column-indicator fancy-battery eyebrowse expand-region exec-path-from-shell evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-magit evil-lisp-state evil-indent-plus evil-iedit-state evil-exchange evil-escape evil-ediff evil-args evil-anzu eval-sexp-fu eshell-z eshell-prompt-extras esh-help elisp-slime-nav dumb-jump define-word crux counsel-projectile company-statistics company-ghci company-ghc company-cabal company-auctex column-enforce-mode cmm-mode clean-aindent-mode auto-yasnippet auto-highlight-symbol auto-dictionary auto-compile auctex-latexmk aggressive-indent adaptive-wrap ace-window ace-link ac-ispell))))
-(custom-set-faces
- ;; custom-set-faces was added by Custom.
- ;; If you edit it by hand, you could mess it up, so be careful.
- ;; Your init file should contain only one such instance.
- ;; If there is more than one, they won't work right.
- )
-)
projects / ~bandali / configs / blobdiff