emacs: exwm: add bindings for switching, swapping, resizing windows

[~bandali/configs] / rc.org

diff --git a/rc.org b/rc.org
index f61bda9..6f77a37 100644 (file)
--- a/rc.org
+++ b/rc.org
@@ -14,886 +14,6 @@ Note: This file is best viewed inside Emacs with org mode.
 This section contains the configuration files (dotfiles) of various
 programs I use.
 
 This section contains the configuration files (dotfiles) of various
 programs I use.
 

-** compton
-:PROPERTIES:
-:header-args+: :tangle ~/.config/compton.conf
-:END:
-
-#+begin_src conf :tangle no
-# Shadow
-shadow = false;                        # Enabled client-side shadows on windows.
-no-dock-shadow = true;         # Avoid drawing shadows on dock/panel windows.
-no-dnd-shadow = true;          # Don't draw shadows on DND windows.
-clear-shadow = true;           # Zero the part of the shadow's mask behind the 
-                               # window. Fix some weirdness with ARGB windows.
-shadow-radius = 5;             # The blur radius for shadows. (default 12)
-shadow-offset-x = -5;          # The left offset for shadows. (default -15)
-shadow-offset-y = -5;          # The top offset for shadows. (default -15)
-# shadow-opacity = 0.7;                # The translucency for shadows. (default .75)
-# shadow-red = 0.0;            # Red color value of shadow. (0.0 - 1.0, defaults to 0)
-# shadow-green = 0.0;          # Green color value of shadow. (0.0 - 1.0, defaults to 0)
-# shadow-blue = 0.0;           # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
-shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];   # Exclude conditions for shadows.
-# shadow-exclude = "n:e:Notification";
-#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
-shadow-ignore-shaped = true;   # Avoid drawing shadow on all shaped windows
-                               # (see also: --detect-rounded-corners)
-
-# Opacity
-menu-opacity = 1.0;                    # The opacity for menus. (default 1.0)
-#inactive-opacity = 0.9;                       # Default opacity of inactive windows. (0.0 - 1.0)
-# active-opacity = 0.8;                        # Default opacity for active windows. (0.0 - 1.0)
-frame-opacity = 1.0;                   # Opacity of window titlebars and borders. (0.1 - 1.0)
-# inactive-opacity-override = true;    # Let inactive opacity set by 'inactive-opacity' overrides
-                                       # value of _NET_WM_OPACITY. Bad choice.
-alpha-step = 0.06;                     # XRender backend: Step size for alpha pictures. Increasing
-                                       # it may result in less X resource usage,
-                                       # Yet fading may look bad.
-#inactive-dim = 0.5;                   # Dim inactive windows. (0.0 - 1.0)
-#inactive-dim-fixed = true;            # Do not let dimness adjust based on window opacity.
-# blur-background = true;              # Blur background of transparent windows.
-                                       # Bad performance with X Render backend.
-                                       # GLX backend is preferred.
-# blur-background-frame = true;                # Blur background of opaque windows with transparent
-                                       # frames as well.
-blur-background-fixed = true;          # Do not let blur radius adjust based on window opacity.
-blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
-                                       # Exclude conditions for background blur.
-
-# Fading
-fading = false;                        # Fade windows during opacity changes.
-fade-delta = 3;                # The time between steps in a fade in milliseconds. (default 10).
-fade-in-step = 0.03;           # Opacity change between steps while fading in. (default 0.028).
-fade-out-step = 0.03;          # Opacity change between steps while fading out. (default 0.03).
-# no-fading-openclose = true;  # Avoid fade windows in/out when opening/closing.
-fade-exclude = [ ];            # Exclude conditions for fading.
-
-# Other
-backend = "glx"                        # Backend to use: "xrender" or "glx". GLX backend is typically
-                               # much faster but depends on a sane driver.
-mark-wmwin-focused = true;     # Try to detect WM windows and mark them as active.
-mark-ovredir-focused = true;   # Mark all non-WM but override-redirect windows active (e.g. menus).
-use-ewmh-active-win = true;    # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
-                               # instead of using FocusIn/Out events. Usually more reliable but
-                               # depends on a EWMH-compliant WM.
-detect-rounded-corners = false;        # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
-detect-client-opacity = true;  # Detect _NET_WM_OPACITY on client windows, useful for window
-                               # managers not passing _NET_WM_OPACITY of client windows to frame
-                               # windows.
-refresh-rate = 0;              # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
-vsync = "drm";                 # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc" 
-                               # See man page for more details.
-dbe = false;                   # Enable DBE painting mode. Rarely needed.
-paint-on-overlay = true;       # Painting on X Composite overlay window. Recommended.
-sw-opti = false;               # Limit compton to repaint at most once every 1 / refresh_rate.
-                               # Incompatible with certain VSync methods.
-unredir-if-possible = false;   # Unredirect all windows if a full-screen opaque window is
-                               # detected, to maximize performance for full-screen windows.
-focus-exclude = [ ];           # A list of conditions of windows that should always be considered
-                               # focused.
-detect-transient = true;       # Use WM_TRANSIENT_FOR to group windows, and consider windows in
-                               # the same group focused at the same time.
-detect-client-leader = true;   # Use WM_CLIENT_LEADER to group windows.
-invert-color-include = [ ];    # Conditions for windows to be painted with inverted color.
-
-# GLX backend                  # GLX backend fine-tune options. See man page for more info.
-glx-no-stencil = true;         # Recommended.
-glx-copy-from-front = false;   # Useful with --glx-swap-method,
-# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
-# glx-no-rebind-pixmap = true; # Recommended if it works.      
-glx-no-rebind-pixmap = true;   # Recommended if it works.      
-#glx-swap-method = "4";        # See man page.
-glx-swap-method = "4"; # See man page.
-
-# Window type settings
-wintypes:
-{
-  tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
-  menu = { shadow = false; };
-  dropdown_menu = { shadow = false; };
-  popup_menu =  { shadow = false; };
-  utility =  { shadow = false; };
-  # fade: Fade the particular type of windows.
-  # shadow: Give those windows shadow
-  # opacity: Default opacity for the type of windows.
-  # focus: Whether to always consider windows of this type focused.
-};
-#+end_src
-
-** dovecot
-:PROPERTIES:
-:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
-:END:
-
-#+begin_src conf
-protocols = imap
-
-listen = 127.0.0.1
-log_path = /var/log/dovecot.log
-info_log_path = /var/log/dovecot-info.log
-
-ssl = no
-disable_plaintext_auth = no
-
-auth_verbose = yes
-auth_mechanisms = plain
-
-passdb {
-  driver = passwd-file
-  args = /etc/dovecot/passwd
-}
-
-userdb {
-  driver = static
-  args = uid=amin gid=amin home=/home/amin/mail/%d/%n
-  default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
-}
-
-# mail_home = /home/amin/mail/%d/%n
-# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
-
-# namespace {
-#   inbox = yes
-#   separator = /
-# }
-
-mail_plugins = $mail_plugins fts fts_lucene
-
-plugin {
-  fts = lucene
-  fts_lucene = whitespace_chars=@.
-  fts_autoindex = yes
-}
-#+end_src
-
-** Dunst
-:PROPERTIES:
-:header-args+: :tangle ~/.config/dunst/dunstrc
-:END:
-
-#+begin_src conf
-[global]
-#font = Ubuntu Mono 10.5
-font = Inconsolata 11
-
-# Path to default icons.
-icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
-
-icon_position = left
-# <b>bold</b>
-# <i>italic</i>
-# <s>strikethrough<s/>
-# <u>underline</u>
-markup = full
-# The format of the message. Possible variables are:
-#   %a  appname
-#   %s  summary
-#   %b  body
-#   %i  iconname (including its path)
-#   %I  iconname (without its path)
-#   %p  progress value if set ([  0%] to [100%]) or nothing
-# Markup is allowed
-format = "<b>%s</b>\n%b"
-# Sort messages by urgency
-sort = yes
-# Show how many messages are currently hidden (because of geometry)
-indicate_hiddenl= no
-# Alignment of message text.
-# Possible values are "left", "center" and "right"
-alignment = center
-# The frequency with wich text that is longer than the notification
-# window allows bounces back and forth.
-# This option conflicts with 'word_wrap'.
-# Set to 0 to disable
-bounce_freq = 3
-# show age of message if message is older than show_age_threshold seconds.
-# set to -1 to disable
-show_age_threshold = -1
-# split notifications into multiple lines if they don't fit into geometry
-word_wrap = yes
-# ignore newlines '\n' in notifications
-ignore_newline = no
-# The geometry of the message window.
-# geometry [{width}]x{height}][+/-{x}+/-{y}]
-# The height is measured in number of notifications everything else in pixels. If the width
-# is omitted but the height is given ("-geometry x2"), the message window
-# expands over the whole screen (dmenu-like). If width is 0,
-# the window expands to the longest message displayed.
-# A positive x is measured from the left, a negative from the
-# right side of the screen.  Y is measured from the top and down respectevly.
-# The width can be negative. In this case the actual width is the
-# screen width minus the width defined in within the geometry option.
-#geometry = "410x12-12+12"
-#geometry = "0x0-30-30"
-geometry = "260x12-30-30"
-# The transparency of the window. range: [0; 100]
-# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
-transparency = 0
-# Don't remove messages, if the user is idle (no mouse or keyboard input)
-# for longer than idle_threshold seconds.
-# Set to 0 to disable.
-idle_threshold = 120
-# Which monitor should the notifications be displayed on.
-monitor = 0
-# Display notification on focused monitor. Possible modes are:
-# mouse: follow mouse pointer
-# keyboard: follow window with keyboard focus
-# none: don't follow anything
-#
-# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
-# This should be the case for almost all modern windowmanagers.
-#
-# If this option is set to mouse or keyboard, the monitor option will be
-# ignored.
-follow = keyboard
-# should a notification popped up from history be sticky or
-# timeout as if it would normally do.
-sticky_history = yes
-# The height of a single line. If the height is smaller than the font height,
-# it will get raised to the font height.
-# This adds empty space above and under the text.
-line_height = 0
-
-show_indicators = yes
-
-# Draw a line of 'separatpr_height' pixel height between two notifications.
-# Set to 0 to disable
-separator_height = 3
-# padding between text and separator
-padding = 8
-# horizontal padding
-horizontal_padding = 8
-# Define a color for the separator.
-# possible values are:
-#  * auto: dunst tries to find a color fitting to the background
-#  * foreground: use the same color as the foreground
-#  * frame: use the same color as the frame.
-#  * anything else will be interpreted as a X color
-separator_color = foreground
-# print a notification on startup
-# This is mainly for error detection, since dbus (re-)starts dunst
-# automatically after a crash.
-startup_notification = false
-# dmenu path
-#dmenu = /usr/bin/dmenu -p dunst:
-dmenu = /usr/bin/rofi -dmenu -p dunst:
-# browser for opening urls in context menu
-browser = /usr/bin/firefox -new-tab
-[frame]
-width = 0
-color = "#377222"
-[shortcuts]
-# shortcuts are specified as [modifier+][modifier+]...key
-# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
-# and 'mod4' (windows-key)
-# xev might be helpful to find names for keys
-# close notification
-close = ctrl+space
-# close all notifications
-close_all = ctrl+shift+space
-# redisplay last message(s)
-# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
-history = ctrl+shift+h
-# context menu
-context = ctrl+shift+period
-[urgency_low]
-# IMPORTANT: colors have to be defined in quotation marks.
-# Otherwise the '#' and following  would be interpreted as a comment.
-background = "#1d2a30"
-foreground = "#71c2af"
-timeout = 3
-[urgency_normal]
-background = "#1d2a30"
-foreground = "#71c2af"
-timeout = 0
-[urgency_critical]
-background = "#1d2a30"
-foreground = "#ff9982"
-timeout = 0
-
-# Every section that isn't one of the above is interpreted as a rules
-# to override settings for certain messages.
-# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
-# and you can override the 'timeout', 'urgency', 'foreground', 'background'
-# and 'format'.
-# Shell-like globbing will get expanded.
-#
-# SCRIPTING
-# you can specify a script that gets run when the rule matches by setting
-# the 'script' option.
-# The script will be called as follows:
-# script appname summary body icon urgency
-# where urgency can be "LOW", "NORMAL" or "CRITICAL".
-#
-# NOTE: if you don't want a notification to be displayed, set the format to ""
-# NOTE: It might be helpful to run dunst -print in a terminal in order to find
-# fitting options for rules.
-#[espeak]
-#    summary = "*"
-#    script = dunst_espeak.sh
-#[script-test]
-#    summary = "*script*"
-#    script = dunst_test.sh
-#[ignore]
-## This notification will not be displayed
-#    summary = "foobar"
-#    format = ""
-#[signed_on]
-#    appname = Pidgin
-#    summary = "*signed on*"
-#    urgency = low
-#
-#[signed_off]
-#    appname = Pidgin
-#    summary = *signed off*
-#    urgency = low
-#
-#[says]
-#    appname = Pidgin
-#    summary = *says*
-#    urgency = critical
-#
-#[twitter]
-#    appname = Pidgin
-#    summary = *twitter.com*
-#    urgency = normal
-#
-[xfpm-backlight]
-    summary = *Brightness*
-    urgency = low
-#+end_src
-
-** Fontconfig
-:PROPERTIES:
-:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
-:END:
-
-#+begin_src xml
-<?xml version="1.0"?>
-<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
-<fontconfig>
- <match target="font">
-  <edit mode="assign" name="rgba">
-   <const>rgb</const>
-  </edit>
- </match>
- <match target="font">
-  <edit mode="assign" name="hinting">
-   <bool>true</bool>
-  </edit>
- </match>
- <match target="font">
-  <edit mode="assign" name="hintstyle">
-   <const>hintslight</const>
-  </edit>
- </match>
- <match target="font">
-  <edit mode="assign" name="antialias">
-   <bool>true</bool>
-  </edit>
- </match>
- <match target="font">
-  <edit mode="assign" name="lcdfilter">
-   <const>lcddefault</const>
-  </edit>
- </match>
- <dir>~/.fonts</dir>
-
- <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
- <alias binding="same">
-  <family>Helvetica</family>
-  <prefer>
-   <family>Liberation Sans</family>
-  </prefer>
-</alias>
-</fontconfig>
-#+end_src
-
-** getmail
-
-*** getmailrc
-:PROPERTIES:
-:header-args+: :tangle ~/.getmail/getmailrc
-:END:
-
-#+begin_src conf
-[retriever]
-type = SimplePOP3SSLRetriever
-server = fencepost.gnu.org
-username = bandali
-password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
-port = 995
-use_apop = True
-
-[destination]
-type = Maildir
-path = ~/mail/gnu/Inbox/
-
-# [destination]
-# type = MDA_external
-# path = /usr/lib/dovecot/deliver
-# arguments = ('-d', 'amin@aminb.org')
-
-[options]
-delete = True
-#+end_src
-
-*** getmail.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/getmail
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** getmail.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail timer
-
-[Timer]
-OnCalendar=*:0/30
-Persistent=true
-Unit=getmail.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** Git
-
-*** gitconfig
-:PROPERTIES:
-:header-args+: :tangle ~/.gitconfig
-:END:
-
-**** user
-#+begin_src conf
-[user]
-    name = Amin Bandali
-    email = bandali@gnu.org
-    signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
-#+end_src
-
-**** signing
-#+begin_src conf
-[commit]
-    gpgsign = true
-# [format]
-#     signoff = true
-#+end_src
-
-**** core
-#+begin_src conf
-[core]
-    autocrlf = input  # CRLF -> LF on commit
-    editor = emacsclient -t
-    excludesfile = ~/.gitignore_global
-    pager = "less"
-#+end_src
-
-**** gpg
-#+begin_src conf
-[gpg]
-    program = gpg2
-#+end_src
-
-**** alias
-#+begin_src conf
-[alias]
-    git = !exec git  # handle nested git calls, e.g. git git status
-    aliases = config --get-regexp '^alias\\.'
-    a = add
-    s = status
-    sl = status --long
-    c = checkout
-    cb = checkout -b
-    b = branch
-    r = rebase
-    p = pull
-    pr = pull --rebase
-    ps = push
-    psf = push --force
-    nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
-    nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
-#+end_src
-
-**** color
-#+begin_src conf
-[color]
-    ui = auto
-[color "status"]
-    added = green bold
-    changed = red bold
-    untracked = red bold
-[color "branch"]
-    current = green bold
-    remote = magenta bold
-[color "diff"]
-    new = green bold
-    old = red bold
-#+end_src
-
-**** status
-#+begin_src conf
-[status]
-    # showUntrackedFiles = all
-    short=true
-    branch=true
-#+end_src
-
-**** github
-#+begin_src conf
-[github]
-       user = aminb
-#+end_src
-
-**** send-email
-#+begin_src conf
-[sendemail]
-       smtpuser = bandali
-       smtpserver = fencepost.gnu.org
-       smtpserverport = 587
-       smtpencryption = tls
-       annotate = yes
-#+end_src
-
-*** gitignore
-:PROPERTIES:
-:header-args+: :tangle ~/.gitignore_global
-:END:
-
-#+begin_src conf
-*.orig
-*.py[co]
-*.sublime-workspace
-*~
-.DS_Store
-*.elc
-*-autoloads.el
-#+end_src
-
-** GnuPG
-:PROPERTIES:
-:header-args+: :tangle ~/.gnupg/gpg-agent.conf
-:END:
-
-#+begin_src conf
-default-cache-ttl 43200
-max-cache-ttl 43200
-
-default-cache-ttl-ssh 10800
-max-cache-ttl-ssh 10800
-
-# pinentry-program /usr/bin/pinentry-qt
-#+end_src
-
-** GTK
-
-*** gtk-2.0
-:PROPERTIES:
-:header-args+: :tangle ~/.gtkrc-2.0
-:END:
-
-#+begin_src conf
-gtk-theme-name="Greybird"
-gtk-icon-theme-name="Paper"
-gtk-font-name="Ubuntu 10"
-gtk-menu-images=0
-# gtk-key-theme-name = "Emacs"
-#+end_src
-
-*** gtk-3.0
-:PROPERTIES:
-:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
-:END:
-
-#+begin_src conf :tangle no
-[Settings]
-gtk-icon-theme-name = Paper
-# gtk-theme-name = Adwaita
-
-gtk-theme-name = Greybird
-# gtk-theme-name = Arc-Darker
-# gtk-theme-name = Numix-ArchBlue
-
-gtk-font-name = Ubuntu 10
-# gtk-key-theme-name = Emacs
-#+end_src
-
-** [[https://github.com/Leinnan/i3gs][i3gs]]
-:PROPERTIES:
-:header-args+: :tangle ~/.config/i3gs/config
-:END:
-
-#+begin_src conf :comments none :tangle no
-borders_width=0 0 2 0
-separator_width=10
-
-#[mpd]
-#preset=MPD
-#title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
-#borders_color=#7FDBFF
-
-[ram]
-preset=RAM
-title=<span weight='heavy' fgcolor='#3D9970'> </span>
-borders_color=#3D9970
-
-#[cpu]
-#preset=CPU
-#title=<span weight='heavy' fgcolor='#2ECC40'> </span>
-#borders_color=#2ECC40
-
-#[hdd]
-#preset=HDD
-#title=<span weight='heavy' fgcolor='#01FF70'> </span>
-#borders_color=#01FF70
-
-[volume]
-command=volume-info
-title=<span weight='heavy' fgcolor='#7FDBFF'></span>
-borders_color=#7FDBFF
-
-[battery]
-preset=BAT
-command=battery-percentage-time
-title=<span weight='heavy' fgcolor='#39CCCC'> </span>
-borders_color=#39CCCC
-
-[wifi]
-preset=WIFI
-title=<span weight='heavy' fgcolor='#01FF70'> </span>
-borders_color=#01FF70
-
-[date]
-preset=DATE
-command=date '+%-I:%M, %a %b %d '
-title=<span weight='heavy' fgcolor='#FFDC00'> </span>
-borders_color=#FFDC00
-separator_width=0
-#+end_src
-
-** i3status
-:PROPERTIES:
-:header-args+: :tangle ~/.config/i3status/config
-:END:
-
-#+begin_src conf :comments none
-# i3status configuration file.
-# see "man i3status" for documentation.
-
-# It is important that this file is edited as UTF-8.
-# The following line should contain a sharp s:
-# ß
-# If the above line is not correctly displayed, fix your editor first!
-
-general {
-        colors = true
-        interval = 5
-        output_format = "i3bar"
-}
-
-# order += "ipv6"
-order += "disk /"
-order += "disk /data"
-# order += "wireless _first_"
-order += "ethernet _first_"
-order += "battery 0"
-order += "volume master"
-order += "load"
-order += "tztime local"
-
-wireless _first_ {
-        format_up = "W:%quality %essid %ip"
-        format_down = "W: down"
-}
-
-ethernet _first_ {
-        # if you use %speed, i3status requires root privileges
-        format_up = "E: %ip (%speed)"
-        format_down = "E: down"
-}
-
-battery 0 {
-        format = "%status %percentage %remaining (%consumption)"
-        path = "/sys/class/power_supply/BAT%d/uevent"
-        low_threshold = "10"
-        threshold_type = "percentage"
-        last_full_capacity = true
-        integer_battery_capacity = true
-        hide_seconds = true
-}
-
-tztime local {
-        format = "%-I:%M%P %a %b %d"
-}
-
-volume master {
-        format = "♪ %volume"
-        format_muted = "🔇 %volume"
-        device = "pulse"
-}
-
-load {
-        format = "%1min"
-}
-
-disk "/" {
-        format = "/ %avail"
-}
-
-disk "/data" {
-        format = "/data %avail"
-}
-#+end_src
-
-** isync
-
-*** mbsyncrc
-:PROPERTIES:
-:header-args+: :tangle ~/.mbsyncrc
-:END:
-
-#+begin_src conf
-# Global defaults
-CopyArrivalDate yes
-Create Both
-Expunge Both
-
-######
-IMAPAccount amin
-Host mail.aminb.org
-User amin@aminb.org
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
-SSLType IMAPS
-
-IMAPStore amin-remote
-Account amin
-
-IMAPAccount amin-dovecot
-Host 127.0.0.1
-Port 143
-User amin@aminb.org
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
-SSLType None
-
-IMAPStore amin-local
-Account amin-dovecot
-
-Channel amin
-Master :amin-remote:
-Slave :amin-local:
-Patterns *
-
-######
-IMAPAccount uwaterloo
-Host connect.uwaterloo.ca
-User abandali
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
-SSLType IMAPS
-
-IMAPStore uwaterloo-remote
-Account uwaterloo
-
-IMAPAccount uwaterloo-dovecot
-Host 127.0.0.1
-Port 143
-User abandali@uwaterloo.ca
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
-SSLType None
-
-IMAPStore uwaterloo-local
-Account uwaterloo-dovecot
-
-Channel uwaterloo
-Master :uwaterloo-remote:
-Slave :uwaterloo-local:
-Patterns *
-#+end_src
-
-*** mbsync.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/mbsync.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=mbsync service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/mbsync -Va
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** mbsync.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=mbsync timer
-
-[Timer]
-OnCalendar=*:0/15
-Persistent=true
-Unit=mbsync.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** Latexmk
-:PROPERTIES:
-:header-args+: :tangle ~/.latexmkrc
-:END:
-
-#+begin_src conf
-$pdf_previewer = "start zathura %O %S";
-$clean_ext = "aux out";
-
-# $pdf_update_method = 4;
-# $pdf_update_command = "zathura %O %S";
-
-# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
-# by Ctrl+click in the PDF.
-# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
-# editor.
-# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
-#+end_src
-
-** libinput
-
-Improve XPS 15 9560's touchpad experience.
-
-# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
-#+begin_src conf :tangle no
-Section "InputClass"
-    Identifier "libinput touchpad catchall"
-    Driver "libinput"
-    MatchIsTouchpad "on"
-    Option "ClickMethod" "clickfinger"
-    Option "NaturalScrolling" "true"
-    Option "Tapping" "on"
-    Option "TappingButtonMap" "lrm"
-EndSection
-#+end_src
-

 ** mpd
 :PROPERTIES:
 :header-args+: :tangle ~/.config/mpd/mpd.conf
 ** mpd
 :PROPERTIES:
 :header-args+: :tangle ~/.config/mpd/mpd.conf


@@ -1309,64 +429,6 @@ audio_output {
 ###############################################################################
 #+end_src
 
 ###############################################################################
 #+end_src
 

-** msmtp
-:PROPERTIES:
-:header-args+: :tangle ~/.msmtprc
-:END:
-
-#+begin_src conf
-# Set default values for all following accounts.
-defaults
-port 587
-tls on
-auth on
-#tls_trust_file /etc/ssl/certs/ca-certificates.crt
-logfile ~/.msmtp.log
-
-# aminb
-account aminb
-host mail.aminb.org
-# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint DE:5F:73:0C:F7:9A:7B:1D:55:AA:49:28:E7:28:49:24:A4:08:55:00:7A:7E:D8:7F:30:06:26:24:11:29:61:07
-tls_starttls on
-from amin@aminb.org
-user amin@aminb.org
-passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
-
-account bandali-me : aminb
-from amin@bandali.me
-
-# gnu
-account gnu
-host fencepost.gnu.org
-# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4
-tls_starttls on
-from bandali@gnu.org
-user bandali
-passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
-
-# gnu (old)
-account gnu-aminb : gnu
-from aminb@gnu.org
-account gnu-amin : gnu
-from amin@gnu.org
-account gnu-mab : gnu
-from mab@gnu.org
-
-# uwaterloo
-account uwaterloo
-host connect.uwaterloo.ca
-tls_starttls on
-from abandali@uwaterloo.ca
-user abandali
-passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
-tls_trust_file /etc/ssl/certs/ca-certificates.crt
-
-# Set a default account
-account default : aminb
-#+end_src
-

 ** ncmpcpp
 
 *** config
 ** ncmpcpp
 
 *** config


@@ -1944,233 +1006,10 @@ def_key "K"
     move_sort_order_up
 #+end_src
 
     move_sort_order_up
 #+end_src
 

-** notmuch
-
-*** notmuch-config
-:PROPERTIES:
-:header-args+: :tangle ~/.notmuch-config
-:END:
-
-#+begin_src conf
-# .notmuch-config - Configuration file for the notmuch mail system
-#
-# For more information about notmuch, see https://notmuchmail.org
-
-# Database configuration
-#
-# The only value supported here is 'path' which should be the top-level
-# directory where your mail currently exists and to where mail will be
-# delivered in the future. Files should be individual email messages.
-# Notmuch will store its database within a sub-directory of the path
-# configured here named ".notmuch".
-#
-[database]
-path=/home/amin/oldmail
-
-# User configuration
-#
-# Here is where you can let notmuch know how you would like to be
-# addressed. Valid settings are
-#
-#      name            Your full name.
-#      primary_email   Your primary email address.
-#      other_email     A list (separated by ';') of other email addresses
-#                      at which you receive email.
-#
-# Notmuch will use the various email addresses configured here when
-# formatting replies. It will avoid including your own addresses in the
-# recipient list of replies, and will set the From address based on the
-# address to which the original email was addressed.
-#
-[user]
-name=Amin Bandali
-primary_email=amin@aminb.org
-other_email=bandali@gnu.org;abandali@uwaterloo.ca;
-
-# Configuration for "notmuch new"
-#
-# The following options are supported here:
-#
-#      tags    A list (separated by ';') of the tags that will be
-#              added to all messages incorporated by "notmuch new".
-#
-#      ignore  A list (separated by ';') of file and directory names
-#              that will not be searched for messages by "notmuch new".
-#
-#              NOTE: *Every* file/directory that goes by one of those
-#              names will be ignored, independent of its depth/location
-#              in the mail store.
-#
-[new]
-tags=new;
-#tags=unread;inbox;
-ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
-
-# Search configuration
-#
-# The following option is supported here:
-#
-#      exclude_tags
-#              A ;-separated list of tags that will be excluded from
-#              search results by default.  Using an excluded tag in a
-#              query will override that exclusion.
-#
-[search]
-exclude_tags=deleted;spam;
-
-# Maildir compatibility configuration
-#
-# The following option is supported here:
-#
-#      synchronize_flags      Valid values are true and false.
-#
-#      If true, then the following maildir flags (in message filenames)
-#      will be synchronized with the corresponding notmuch tags:
-#
-#              Flag    Tag
-#              ----    -------
-#              D       draft
-#              F       flagged
-#              P       passed
-#              R       replied
-#              S       unread (added when 'S' flag is not present)
-#
-#      The "notmuch new" command will notice flag changes in filenames
-#      and update tags, while the "notmuch tag" and "notmuch restore"
-#      commands will notice tag changes and update flags in filenames
-#
-[maildir]
-synchronize_flags=true
-
-# Cryptography related configuration
-#
-# The following option is supported here:
-#
-#      gpg_path
-#              binary name or full path to invoke gpg.
-#
-[crypto]
-gpg_path=gpg
-#+end_src
-
-*** pre-new hook
-:PROPERTIES:
-:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-touch /tmp/gnusieve.log
-sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
-            -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
-#+end_src
-
-*** post-new hook
-:PROPERTIES:
-:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-# apply sent tag to messages sent by me
-notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
-
-# initial tagging
-notmuch tag -latest                     -- tag:latest
-notmuch tag +inbox +unread +latest -new -- tag:new
-
-
-# apply tags to lists
-
-# <aminb>
-notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
-notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
-
-notmuch tag -inbox +pay     -- folder:amin/pay
-notmuch tag -inbox +banking -- folder:amin/banking
-notmuch tag -inbox +work    -- folder:amin/work
-# </aminb>
-
-# <uw>
-notmuch tag -inbox +uw/cs136  -- folder:uwaterloo/lists/cs136
-notmuch tag -inbox +uw/cs846  -- folder:uwaterloo/lists/cs846
-notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
-notmuch tag -inbox +uw/se212  -- folder:uwaterloo/lists/se212
-notmuch tag -inbox +uw/se463  -- folder:uwaterloo/lists/se463
-
-notmuch tag -inbox +lists/alloytools       -- folder:uwaterloo/lists/alloytools
-notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
-notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
-notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
-notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
-notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
-# </uw>
-
-# <gnu>
-notmuch tag -inbox +l/emacs-devel       -- folder:gnu/l/emacs-devel
-notmuch tag -inbox +l/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
-notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
-notmuch tag -inbox +l/fencepost-users   -- folder:gnu/l/fencepost-users
-notmuch tag -inbox +l/guix-devel        -- folder:gnu/l/guix-devel
-notmuch tag -inbox +l/guile-devel       -- folder:gnu/l/guile-devel
-notmuch tag -inbox +l/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
-notmuch tag -inbox +l/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
-notmuch tag -inbox +l/www-commits       -- folder:gnu/l/www-commits
-notmuch tag -inbox +l/www-discuss       -- folder:gnu/l/www-discuss
-notmuch tag -inbox +webmasters          -- folder:gnu/webmasters
-
-notmuch tag -inbox +l/deepspec     -- folder:gnu/l/deepspec
-notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
-notmuch tag -inbox +l/haskell-art  -- folder:gnu/l/haskell-art
-notmuch tag -inbox +l/notmuch      -- folder:gnu/l/notmuch
-
-notmuch tag -inbox +l/~aminb/test-priv         -- folder:gnu/l/~aminb/test-priv
-notmuch tag -inbox +l/~sircmpwn/sr.ht-admins   -- folder:gnu/l/~sircmpwn/sr.ht-admins
-notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
-notmuch tag -inbox +l/~sircmpwn/sr.ht-dev      -- folder:gnu/l/~sircmpwn/sr.ht-dev
-notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss  -- folder:gnu/l/~sircmpwn/sr.ht-discuss
-# </gnu>
-
-notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
-notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
-#+end_src
-
-*** notmuch.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/notmuch.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=notmuch service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/notmuch new
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** notmuch.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=notmuch timer
-
-[Timer]
-OnCalendar=*:0/5
-Persistent=true
-Unit=notmuch.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-

 ** pigeonhole
 *** amin.sieve
 :PROPERTIES:
 ** pigeonhole
 *** amin.sieve
 :PROPERTIES:

-:header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none
+:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none

 :END:
 
 #+begin_src conf
 :END:
 
 #+begin_src conf


@@ -2189,7 +1028,7 @@ include :personal "lists";
 
 *** lists.sieve
 :PROPERTIES:
 
 *** lists.sieve
 :PROPERTIES:

-:header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none
+:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none

 :END:
 
 #+begin_src conf
 :END:
 
 #+begin_src conf


@@ -2240,26 +1079,9 @@ if anyof (
 }
 #+end_src
 
 }
 #+end_src
 

-** PowerTOP
+** redshift

 :PROPERTIES:
 :PROPERTIES:

-:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
-:END:
-
-#+begin_src conf
-[Unit]
-Description=Powertop tunings
-
-[Service]
-ExecStart=/usr/bin/powertop --auto-tune
-RemainAfterExit=true
-
-[Install]
-WantedBy=multi-user.target
-#+end_src
-
-** redshift
-:PROPERTIES:
-:header-args+: :tangle ~/.config/redshift.conf :comments none
+:header-args+: :tangle ~/.config/redshift.conf :comments none

 :END:
 
 #+begin_src conf
 :END:
 
 #+begin_src conf


@@ -2330,475 +1152,11 @@ adjustment-method=randr
 ;screen=1
 #+end_src
 
 ;screen=1
 #+end_src
 

-** rofi
-:PROPERTIES:
-:header-args+: :tangle ~/.config/rofi/config
-:END:
-
-#+begin_src conf
-! rofi.font: Ubuntu Mono 13
-! rofi.font: Inconsolata 16
-! rofi.font: Iosevka 13
-! rofi.font: Source Code Pro 11
-rofi.font: Source Code Pro 10.5
-rofi.modi: run,window
-! rofi.width: 640
-rofi.width: 600
-!rofi.location: 2
-!rofi.yoffset: 200
-rofi.monitor: -1
-!rofi.lines: 10
-
-!rofi.theme: /usr/share/rofi/themes//Arc.rasi
-!rofi.theme: /usr/share/rofi/themes//Paper.rasi
-!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
-
-rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
-#+end_src
-
-** rofi-pass
-:PROPERTIES:
-:header-args+: :tangle ~/.config/rofi-pass/config
-:END:
-
-#+begin_src conf
-# permanently set alternative root dir
-# root=/path/to/root
-
-# rofi command. Make sure to have "$@" as last argument
-_rofi () {
-    #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
-    rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
-}
-
-# xdotool needs the keyboard layout to be set using setxkbmap
-# You can do this in your autostart scripts (e.g. xinitrc)
-
-# If for some reason, you cannot do this, you can set the command here.
-# and set fix_layout to true
-fix_layout=false
-
-layout_cmd () {
-  setxkbmap us
-}
-
-# fields to be used
-URL_field='url'
-USERNAME_field='user'
-AUTOTYPE_field='autotype'
-
-# delay to be used for :delay keyword
-delay=2
-
-## Programs to be used
-# Editor
-EDITOR='gvim -f'
-
-# Browser
-BROWSER='chromium'
-
-## Misc settings
-
-default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
-auto_enter='false'
-notify='false'
-default_autotype='user :tab pass'
-
-# color of the help messages
-# leave empty for autodetection
-help_color="#4872FF"
-
-# Clipboard settings
-# Possible options: primary, clipboard, both
-clip=primary
-
-# Options for generating new password entries
-# default_user is also used for password files that have no user field.
-default_user=aminb
-default_user2=aminban
-password_length=30
-
-# Custom Keybindings
-#autotype="Alt+1"
-autotype="Alt+m"
-type_user="Alt+2"
-type_pass="Alt+3"
-open_url="Alt+4"
-copy_name="Alt+u"
-copy_url="Alt+l"
-copy_pass="Alt+p"
-show="Alt+o"
-copy_entry="Alt+2"
-type_entry="Alt+1"
-copy_menu="Alt+c"
-action_menu="Alt+a"
-type_menu="Alt+t"
-help="Alt+h"
-switch="Alt+x"
-insert_pass="Alt+n"
-#+end_src
-
-** sway
-
-*** main
-:PROPERTIES:
-:header-args+: :tangle ~/.config/sway/config
-:END:
-
-#+begin_src conf
-### Variables
-# super
-set $mod Mod4
-# alt
-set $mod2 Mod1
-set $left h
-set $down j
-set $up k
-set $right l
-set $term urxvt
-set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
-
-### Output configuration
-#
-# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
-output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
-#
-# Example configuration:
-#
-#   output HDMI-A-1 resolution 1920x1080 position 1920,0
-#
-# You can get the names of your outputs by running: swaymsg -t get_outputs
-
-### Idle configuration
-
-exec swayidle \
-   timeout 120  '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
-        resume  '[ -f ~/.nosleep ] || swaymsg "output * dpms on"'  \
-
-
-### Key bindings
-#
-# Basics:
-#
-    # start a terminal
-    bindsym $mod+Return exec $term -name floating
-    bindsym $mod+Shift+Return exec $term
-    for_window [class="URxvt" instance="floating"] floating enable
-
-    # kill focused window
-    bindsym $mod+Shift+q kill
-
-    # start your launcher
-    bindsym $mod+d exec $menu
-
-    # password manager
-    bindsym $mod2+space exec rofi-pass
-
-    # Drag floating windows by holding down $mod and left mouse button.
-    # Resize them with right mouse button + $mod.
-    # Despite the name, also works for non-floating windows.
-    # Change normal to inverse to use left mouse button for resizing and right
-    # mouse button for dragging.
-    floating_modifier $mod normal
-
-    # reload the configuration file
-    bindsym $mod+Shift+c reload
-
-    # exit sway (logs you out of your wayland session)
-    # bindsym $mod+Shift+e exit
-
-    bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
-    bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
-    bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
-
-    bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
-    bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
-    bindsym XF86AudioMute exec pamixer --toggle-mute
-    bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
-
-    bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
-
-    # original sway workspace switch and window move
-    bindsym $mod+bracketleft workspace prev
-    bindsym $mod+bracketright workspace next
-    bindsym $mod+braceleft move container to workspace prev
-    bindsym $mod+braceright move container to workspace next
-
-    # bspwm-esque workspace switch and window move
-    bindsym $mod2+bracketleft exec sway-ws-util switch prev
-    bindsym $mod2+bracketright exec sway-ws-util switch next
-    bindsym $mod2+braceleft exec sway-ws-util move prev follow
-    bindsym $mod2+braceright exec sway-ws-util move next follow
-#
-# Moving around:
-#
-    # Move your focus around
-    bindsym $mod+$left focus left
-    bindsym $mod+$down focus down
-    bindsym $mod+$up focus up
-    bindsym $mod+$right focus right
-    # or use $mod+[up|down|left|right]
-    bindsym $mod+Left focus left
-    bindsym $mod+Down focus down
-    bindsym $mod+Up focus up
-    bindsym $mod+Right focus right
-
-    # _move_ the focused window with the same, but add Shift
-    bindsym $mod+Shift+$left move left
-    bindsym $mod+Shift+$down move down
-    bindsym $mod+Shift+$up move up
-    bindsym $mod+Shift+$right move right
-    # ditto, with arrow keys
-    bindsym $mod+Shift+Left move left
-    bindsym $mod+Shift+Down move down
-    bindsym $mod+Shift+Up move up
-    bindsym $mod+Shift+Right move right
-#
-# Workspaces:
-#
-    # switch to workspace
-    bindsym $mod+1 workspace 1
-    bindsym $mod+2 workspace 2
-    bindsym $mod+3 workspace 3
-    bindsym $mod+4 workspace 4
-    bindsym $mod+5 workspace 5
-    bindsym $mod+6 workspace 6
-    bindsym $mod+7 workspace 7
-    bindsym $mod+8 workspace 8
-    bindsym $mod+9 workspace 9
-    bindsym $mod+0 workspace 10
-    # move focused container to workspace
-    bindsym $mod+Shift+1 move container to workspace 1
-    bindsym $mod+Shift+2 move container to workspace 2
-    bindsym $mod+Shift+3 move container to workspace 3
-    bindsym $mod+Shift+4 move container to workspace 4
-    bindsym $mod+Shift+5 move container to workspace 5
-    bindsym $mod+Shift+6 move container to workspace 6
-    bindsym $mod+Shift+7 move container to workspace 7
-    bindsym $mod+Shift+8 move container to workspace 8
-    bindsym $mod+Shift+9 move container to workspace 9
-    bindsym $mod+Shift+0 move container to workspace 10
-    # Note: workspaces can have any name you want, not just numbers.
-    # We just use 1-10 as the default.
-#
-# Layout stuff:
-#
-    # You can "split" the current object of your focus with
-    # $mod+b or $mod+v, for horizontal and vertical splits
-    # respectively.
-    bindsym $mod+b splith
-    bindsym $mod+v splitv
-
-    # Switch the current container between different layout styles
-    bindsym $mod+s layout stacking
-    bindsym $mod+w layout tabbed
-    bindsym $mod+e layout toggle split
-
-    # Make the current focus fullscreen
-    bindsym $mod+f fullscreen
-
-    # Toggle sticky-ness of the current (floating) window
-    bindsym $mod+$mod2+space sticky toggle
-
-    # Toggle the current focus between tiling and floating mode
-    bindsym $mod+Shift+space floating toggle
-
-    # Swap focus between the tiling area and the floating area
-    bindsym $mod+space focus mode_toggle
-
-    # move focus to the parent container
-    bindsym $mod+a focus parent
-#
-# Scratchpad:
-#
-    # Sway has a "scratchpad", which is a bag of holding for windows.
-    # You can send windows there and get them back later.
-
-    # Move the currently focused window to the scratchpad
-    bindsym $mod+Shift+minus move scratchpad
-
-    # Show the next scratchpad window or hide the focused scratchpad window.
-    # If there are multiple scratchpad windows, this command cycles through them.
-    bindsym $mod+minus scratchpad show
-#
-# Resizing containers:
-#
-mode "resize" {
-    # left will shrink the containers width
-    # right will grow the containers width
-    # up will shrink the containers height
-    # down will grow the containers height
-    bindsym $left resize shrink width 10px
-    bindsym $down resize grow height 10px
-    bindsym $up resize shrink height 10px
-    bindsym $right resize grow width 10px
-
-    # ditto, with arrow keys
-    bindsym Left resize shrink width 10px
-    bindsym Down resize grow height 10px
-    bindsym Up resize shrink height 10px
-    bindsym Right resize grow width 10px
-
-    # return to default mode
-    bindsym Return mode "default"
-    bindsym Escape mode "default"
-}
-bindsym $mod+Shift+r mode "resize"
-
-#
-# Power button
-#
-
-set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
-mode "$mode_system" {
-    bindsym l       exec swaylock,              mode "default"
-    bindsym e       exec swaymsg exit,          mode "default"
-    bindsym s       exec systemctl suspend,     mode "default"
-    bindsym h       exec systemctl hibernate,   mode "default"
-    bindsym r       exec systemctl reboot,      mode "default"
-    bindsym Shift+s exec systemctl poweroff -i, mode "default"
-
-    # back to normal: Enter, Escape, or q
-    bindsym Return mode "default"
-    bindsym Escape mode "default"
-    bindsym q      mode "default"
-}
-# bindsym XF86PowerOff mode "$mode_system"
-bindsym $mod+Shift+e mode "$mode_system"
-
-#
-# Presentation mode
-#
-
-bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
-
-#
-# Notifications
-#
-
-bindsym $mod+Shift+n mode notifications
-mode notifications {
-    bindsym Return  exec makoctl invoke; exec makoctl dismiss; mode default
-    bindsym d       exec makoctl dismiss; mode default
-    bindsym Shift+d exec makoctl dismiss -a; mode default
-
-    bindsym Escape mode default
-    bindsym q      mode default
-}
-
-#
-# Screenshotting
-#
-
-bindsym $mod+Shift+s mode screenshot
-mode screenshot {
-    bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
-    bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
-
-    bindsym Escape mode default
-    bindsym q      mode default
-}
-
-#
-# Window configurations
-#
-for_window [class="mpv"] floating enable
-for_window [class="TelegramDesktop"] floating enable
-for_window [app_id="pavucontrol"] floating enable
-for_window [app_id="meld"] floating enable
-for_window [app_id="nm-connection-editor"] floating enable
-
-#
-# Status Bar:
-#
-# Read `man 5 sway-bar` for more information about this section.
-bar {
-    position bottom
-    colors {
-        statusline #ffffff
-        background #212121
-        inactive_workspace #21212100 #21212100 #5c5c5c
-    }
-    status_command i3status | my-i3status.py
-}
-
-# font pango: benis uushi 9
-# font pango: Ubuntu Mono 11
-# font pango: Inconsolata 11
-font pango: DejaVu Sans Mono 9
-# font pango: Liberation Mono 9
-
-exec xrdb .Xresources
-# exec pgrep -x "systemd-inhibit" || \
-#      systemd-inhibit --what=handle-power-key --who=aminb \
-#      --why="Handle power button in sway" sleep infinity
-exec mako 2>&1 >/tmp/mako.log
-exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
-
-include /etc/sway/config.d/*
-include ~/.config/sway/`hostname`
-
-exec systemd-notify --ready || true
-
-#+end_src
-
-*** langa
-:PROPERTIES:
-:header-args+: :tangle ~/.config/sway/langa
-:END:
-
-#+begin_src conf
-input "2:7:SynPS/2_Synaptics_TouchPad" {
-    events disabled
-    dwt enabled
-    tap enabled
-    natural_scroll enabled
-    click_method clickfinger
-}
-
-input "1:1:AT_Translated_Set_2_keyboard" {
-    repeat_delay 200
-    repeat_rate 45
-    xkb_layout us_ab,ir
-    xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
-}
-#+end_src
-
-*** shemshak
-:PROPERTIES:
-:header-args+: :tangle ~/.config/sway/shemshak
-:END:
-
-#+begin_src conf
-input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
-    dwt enabled
-    tap enabled
-    natural_scroll enabled
-    middle_emulation enabled
-    click_method clickfinger
-}
-
-input "1:1:AT_Translated_Set_2_keyboard" {
-    repeat_delay 200
-    repeat_rate 45
-    xkb_layout us,ir
-    xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
-}
-#+end_src
-** swaylock
-:PROPERTIES:
-:header-args+: :tangle ~/.config/swaylock/config
-:END:
-
-#+begin_src conf
-image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
-scaling=fill
-#+end_src

 ** systemd
 
 Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
 
 ** systemd
 
 Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
 

-#+begin_src conf :tangle /etc/systemd/system/getty@tty1.service.d/noclear.conf
+#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf

 [Service]
 TTYVTDisallocate=no
 #+end_src
 [Service]
 TTYVTDisallocate=no
 #+end_src


@@ -2810,33 +1168,43 @@ TTYVTDisallocate=no
 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
 # ------------------------------------------------------------------------------
 # tlp - Parameters for power saving
 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
 # ------------------------------------------------------------------------------
 # tlp - Parameters for power saving

-# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
+# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html

 
 

-# Hint: some features are disabled by default, remove the leading # to enable
-# them.
+# Notes:
+# - Some parameters are disabled, remove the leading '#' to enable # them;
+#   shown values are suggestions not defaults
+# - Default *: intrinsic default that is effective when the parameter is missing
+#   or disabled by a leading '#'; use PARAM="" to disable intrinsic defaults for
+#   parameters with text string values
+# - Default <none>: do nothing or use kernel/hardware defaults

 
 # Set to 0 to disable, 1 to enable TLP.
 
 # Set to 0 to disable, 1 to enable TLP.

+# Default: 0

 TLP_ENABLE=1
 
 # Operation mode when no power supply can be detected: AC, BAT.
 # Concerns some desktop and embedded hardware only.
 TLP_ENABLE=1
 
 # Operation mode when no power supply can be detected: AC, BAT.
 # Concerns some desktop and embedded hardware only.

+# Default: <none>

 TLP_DEFAULT_MODE=AC
 
 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
 TLP_DEFAULT_MODE=AC
 
 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.

+# Default: 0

 TLP_PERSISTENT_DEFAULT=0
 
 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
 # Non-zero value enables, zero disables laptop mode.
 TLP_PERSISTENT_DEFAULT=0
 
 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
 # Non-zero value enables, zero disables laptop mode.

+# Default: 0 (AC), 2 (BAT)

 DISK_IDLE_SECS_ON_AC=0
 DISK_IDLE_SECS_ON_BAT=2
 
 # Dirty page values (timeouts in secs).
 DISK_IDLE_SECS_ON_AC=0
 DISK_IDLE_SECS_ON_BAT=2
 
 # Dirty page values (timeouts in secs).

+# Default: 15 (AC + BAT)

 MAX_LOST_WORK_SECS_ON_AC=15
 MAX_LOST_WORK_SECS_ON_BAT=60
 
 MAX_LOST_WORK_SECS_ON_AC=15
 MAX_LOST_WORK_SECS_ON_BAT=60
 

-# Hint: CPU parameters below are disabled by default, remove the leading #
-# to enable them, otherwise kernel default values are used.
+# Note: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel defaults will be used.

 
 # Select a CPU frequency scaling governor.
 # Intel Core i processor with intel_pstate driver:
 
 # Select a CPU frequency scaling governor.
 # Intel Core i processor with intel_pstate driver:


@@ -2844,19 +1212,21 @@ MAX_LOST_WORK_SECS_ON_BAT=60
 # Older hardware with acpi-cpufreq driver:
 #   ondemand(*), powersave, performance, conservative, schedutil.
 # (*) is recommended.
 # Older hardware with acpi-cpufreq driver:
 #   ondemand(*), powersave, performance, conservative, schedutil.
 # (*) is recommended.

-# Hint: use tlp-stat -p to show the active driver and available governors.
+# Use tlp-stat -p to show the active driver and available governors.

 # Important:
 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
 #   efficient for *almost all* workloads and therefore kernel and most
 #   distributions have chosen them as defaults. If you still want to change,
 #   you should know what you're doing! You *must* disable your distribution's
 #   governor settings or conflicts will occur.
 # Important:
 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
 #   efficient for *almost all* workloads and therefore kernel and most
 #   distributions have chosen them as defaults. If you still want to change,
 #   you should know what you're doing! You *must* disable your distribution's
 #   governor settings or conflicts will occur.

+# Default: <none>

 #CPU_SCALING_GOVERNOR_ON_AC=powersave
 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
 
 # Set the min/max frequency available for the scaling governor.
 #CPU_SCALING_GOVERNOR_ON_AC=powersave
 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
 
 # Set the min/max frequency available for the scaling governor.

-# Possible values strongly depend on your CPU. For available frequencies see
+# Possible values depend on your CPU. For available frequencies see

 # the output of tlp-stat -p.
 # the output of tlp-stat -p.

+# Default: <none>

 #CPU_SCALING_MIN_FREQ_ON_AC=0
 #CPU_SCALING_MAX_FREQ_ON_AC=0
 #CPU_SCALING_MIN_FREQ_ON_BAT=0
 #CPU_SCALING_MIN_FREQ_ON_AC=0
 #CPU_SCALING_MAX_FREQ_ON_AC=0
 #CPU_SCALING_MIN_FREQ_ON_BAT=0


@@ -2866,6 +1236,7 @@ MAX_LOST_WORK_SECS_ON_BAT=60
 #   performance, balance_performance, default, balance_power, power
 # Values are given in order of increasing power saving.
 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
 #   performance, balance_performance, default, balance_power, power
 # Values are given in order of increasing power saving.
 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.

+# Default: <none>

 CPU_HWP_ON_AC=balance_performance
 CPU_HWP_ON_BAT=balance_power
 
 CPU_HWP_ON_AC=balance_performance
 CPU_HWP_ON_BAT=balance_power
 


@@ -2873,6 +1244,7 @@ CPU_HWP_ON_BAT=balance_power
 # Limit the max/min P-state to control the power dissipation of the CPU.
 # Values are stated as a percentage of the available performance.
 # Requires an Intel Core i processor with intel_pstate driver.
 # Limit the max/min P-state to control the power dissipation of the CPU.
 # Values are stated as a percentage of the available performance.
 # Requires an Intel Core i processor with intel_pstate driver.

+# Default: <none>

 #CPU_MIN_PERF_ON_AC=0
 #CPU_MAX_PERF_ON_AC=100
 #CPU_MIN_PERF_ON_BAT=0
 #CPU_MIN_PERF_ON_AC=0
 #CPU_MAX_PERF_ON_AC=100
 #CPU_MIN_PERF_ON_BAT=0


@@ -2883,39 +1255,47 @@ CPU_HWP_ON_BAT=balance_power
 # Important:
 # - This may conflict with your distribution's governor settings
 # - A value of 1 does *not* activate boosting, it just allows it
 # Important:
 # - This may conflict with your distribution's governor settings
 # - A value of 1 does *not* activate boosting, it just allows it

+# Default: <none>

 #CPU_BOOST_ON_AC=1
 #CPU_BOOST_ON_BAT=0
 
 # Minimize number of used CPU cores/hyper-threads under light load conditions:
 #   0=disable, 1=enable.
 #CPU_BOOST_ON_AC=1
 #CPU_BOOST_ON_BAT=0
 
 # Minimize number of used CPU cores/hyper-threads under light load conditions:
 #   0=disable, 1=enable.

+# Default: <none>

 SCHED_POWERSAVE_ON_AC=0
 SCHED_POWERSAVE_ON_BAT=1
 
 # Kernel NMI Watchdog:
 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
 SCHED_POWERSAVE_ON_AC=0
 SCHED_POWERSAVE_ON_BAT=1
 
 # Kernel NMI Watchdog:
 #   0=disable (default, saves power), 1=enable (for kernel debugging only).

+# Default: <none>

 NMI_WATCHDOG=0
 
 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
 # Frequency voltage pairs are written to:
 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
 # CAUTION: only use this, if you thoroughly understand what you are doing!
 NMI_WATCHDOG=0
 
 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
 # Frequency voltage pairs are written to:
 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
 # CAUTION: only use this, if you thoroughly understand what you are doing!

+# Default: <none>.

 #PHC_CONTROLS="F:V F:V F:V F:V"
 
 # Set CPU performance versus energy savings policy:
 #   performance, balance-performance, default, balance-power, power.
 # Values are given in order of increasing power saving.
 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
 #PHC_CONTROLS="F:V F:V F:V F:V"
 
 # Set CPU performance versus energy savings policy:
 #   performance, balance-performance, default, balance-power, power.
 # Values are given in order of increasing power saving.
 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.

+# Default: <none>

 ENERGY_PERF_POLICY_ON_AC=performance
 ENERGY_PERF_POLICY_ON_BAT=balance-power
 
 ENERGY_PERF_POLICY_ON_AC=performance
 ENERGY_PERF_POLICY_ON_BAT=balance-power
 

-# Disk devices; separate multiple devices with spaces (default: sda).
+# Disk devices; separate multiple devices with spaces.

 # Devices can be specified by disk ID also (lookup with: tlp diskid).
 # Devices can be specified by disk ID also (lookup with: tlp diskid).

+# Note: DISK parameters below are effective only when this option is configured.
+# Default: "nvme0n1 sda"

 DISK_DEVICES="sda sdb"
 
 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the hardware default for the particular disk.
 DISK_DEVICES="sda sdb"
 
 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the hardware default for the particular disk.

+# Default: <none>

 DISK_APM_LEVEL_ON_AC="254 254"
 DISK_APM_LEVEL_ON_BAT="128 128"
 
 DISK_APM_LEVEL_ON_AC="254 254"
 DISK_APM_LEVEL_ON_BAT="128 128"
 


@@ -2926,179 +1306,249 @@ DISK_APM_LEVEL_ON_BAT="128 128"
 # See 'man hdparm' for details.
 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the hardware default for the particular disk.
 # See 'man hdparm' for details.
 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the hardware default for the particular disk.

+# Default: <none>

 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
 
 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
 

-# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Select I/O scheduler for the disk devices.
+# Multi queue (blk-mq) schedulers:
+#   mq-deadline(*), none, kyber, bfq
+# Single queue schedulers:
+#   deadline(*), cfq, bfq, noop
+# (*) recommended.

 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the kernel default scheduler for the particular disk.
 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the kernel default scheduler for the particular disk.

-#DISK_IOSCHED="cfq cfq"
+# Notes:
+# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1'
+#   and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0
+# - Single queue schedulers are legacy now and were removed together with
+#   the old block layer in kernel 5.0
+# Default: keep
+#DISK_IOSCHED="mq-deadline mq-deadline"

 
 # AHCI link power management (ALPM) for disk devices:
 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
 # (*) Kernel >= 4.15 required, then recommended.
 # Multiple values separated with spaces are tried sequentially until success.
 
 # AHCI link power management (ALPM) for disk devices:
 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
 # (*) Kernel >= 4.15 required, then recommended.
 # Multiple values separated with spaces are tried sequentially until success.

+# Default: <none>

 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
 
 # Exclude host devices from AHCI link power management.
 # Separate multiple hosts with spaces.
 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
 
 # Exclude host devices from AHCI link power management.
 # Separate multiple hosts with spaces.

+# Default: <none>

 #SATA_LINKPWR_BLACKLIST="host1"
 
 # Runtime Power Management for AHCI host and disks devices:
 #   on=disable, auto=enable.
 #SATA_LINKPWR_BLACKLIST="host1"
 
 # Runtime Power Management for AHCI host and disks devices:
 #   on=disable, auto=enable.

-# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss.
+# Default: <none>

 #AHCI_RUNTIME_PM_ON_AC=on
 #AHCI_RUNTIME_PM_ON_BAT=on
 
 # Seconds of inactivity before disk is suspended.
 #AHCI_RUNTIME_PM_ON_AC=on
 #AHCI_RUNTIME_PM_ON_BAT=on
 
 # Seconds of inactivity before disk is suspended.

+# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated.
+# Default: 15

 AHCI_RUNTIME_PM_TIMEOUT=15
 
 # PCI Express Active State Power Management (PCIe ASPM):
 AHCI_RUNTIME_PM_TIMEOUT=15
 
 # PCI Express Active State Power Management (PCIe ASPM):

-#   default, performance, powersave.
-PCIE_ASPM_ON_AC=performance
-PCIE_ASPM_ON_BAT=powersave
+#   default(*), performance, powersave.
+# (*) keeps BIOS ASPM defaults (recommended)
+# Default: <none>
+#PCIE_ASPM_ON_AC=default
+#PCIE_ASPM_ON_BAT=default
+
+# Set the min/max/turbo frequency for the Intel GPU.
+# Possible values depend on your hardware. For available frequencies see
+# the output of tlp-stat -g.
+# Default: <none>
+#INTEL_GPU_MIN_FREQ_ON_AC=0
+#INTEL_GPU_MIN_FREQ_ON_BAT=0
+#INTEL_GPU_MAX_FREQ_ON_AC=0
+#INTEL_GPU_MAX_FREQ_ON_BAT=0
+#INTEL_GPU_BOOST_FREQ_ON_AC=0
+#INTEL_GPU_BOOST_FREQ_ON_BAT=0

 
 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
 
 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;

-# auto = mid on BAT, high on AC; default = use hardware defaults.
-RADEON_POWER_PROFILE_ON_AC=high
-RADEON_POWER_PROFILE_ON_BAT=low
+# auto = mid on BAT, high on AC.
+# Default: default
+RADEON_POWER_PROFILE_ON_AC=default
+RADEON_POWER_PROFILE_ON_BAT=default

 
 # Radeon dynamic power management method (DPM): battery, performance.
 
 # Radeon dynamic power management method (DPM): battery, performance.

+# Default: <none>

 RADEON_DPM_STATE_ON_AC=performance
 RADEON_DPM_STATE_ON_BAT=battery
 
 # Radeon DPM performance level: auto, low, high; auto is recommended.
 RADEON_DPM_STATE_ON_AC=performance
 RADEON_DPM_STATE_ON_BAT=battery
 
 # Radeon DPM performance level: auto, low, high; auto is recommended.

+# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated.
+# Default: auto

 RADEON_DPM_PERF_LEVEL_ON_AC=auto
 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
 
 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
 RADEON_DPM_PERF_LEVEL_ON_AC=auto
 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
 
 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.

+# Default: <none>

 WIFI_PWR_ON_AC=off
 WIFI_PWR_ON_BAT=on
 
 # Disable wake on LAN: Y/N.
 WIFI_PWR_ON_AC=off
 WIFI_PWR_ON_BAT=on
 
 # Disable wake on LAN: Y/N.

+# Default: N

 WOL_DISABLE=Y
 
 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
 # A value of 0 disables, >=1 enables power saving (recommended: 1).
 WOL_DISABLE=Y
 
 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
 # A value of 0 disables, >=1 enables power saving (recommended: 1).

+# Default: <none>

 SOUND_POWER_SAVE_ON_AC=0
 SOUND_POWER_SAVE_ON_BAT=0
 
 # Disable controller too (HDA only): Y/N.
 SOUND_POWER_SAVE_ON_AC=0
 SOUND_POWER_SAVE_ON_BAT=0
 
 # Disable controller too (HDA only): Y/N.

+# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated.
+# Default: Y

 SOUND_POWER_SAVE_CONTROLLER=N
 
 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
 # Drive can be powered on again by releasing (and reinserting) the eject lever
 # or by pressing the disc eject button on newer models.
 # Note: an UltraBay/MediaBay hard disk is never powered off.
 SOUND_POWER_SAVE_CONTROLLER=N
 
 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
 # Drive can be powered on again by releasing (and reinserting) the eject lever
 # or by pressing the disc eject button on newer models.
 # Note: an UltraBay/MediaBay hard disk is never powered off.

+# Default: 0

 BAY_POWEROFF_ON_AC=0
 BAY_POWEROFF_ON_BAT=0
 BAY_POWEROFF_ON_AC=0
 BAY_POWEROFF_ON_BAT=0

-# Optical drive device to power off (default sr0).
+# Optical drive device to power off
+# Default: sr0

 BAY_DEVICE="sr0"
 
 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
 BAY_DEVICE="sr0"
 
 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.

+# Default: <none>

 RUNTIME_PM_ON_AC=on
 RUNTIME_PM_ON_BAT=auto
 
 # Exclude PCI(e) device adresses the following list from Runtime PM
 # (separate with spaces). Use lspci to get the adresses (1st column).
 RUNTIME_PM_ON_AC=on
 RUNTIME_PM_ON_BAT=auto
 
 # Exclude PCI(e) device adresses the following list from Runtime PM
 # (separate with spaces). Use lspci to get the adresses (1st column).

+# Default: <none>

 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
 
 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
 # prevents accidential power-on of dGPU in hybrid graphics setups.
 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
 
 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
 # prevents accidential power-on of dGPU in hybrid graphics setups.

-# Use "" to disable the feature completely.

 # Separate multiple drivers with spaces.
 # Separate multiple drivers with spaces.

-#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
+# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable
+# completely.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon"

 
 # Set to 0 to disable, 1 to enable USB autosuspend feature.
 
 # Set to 0 to disable, 1 to enable USB autosuspend feature.

+# Default: 0

 USB_AUTOSUSPEND=1
 
 # Exclude listed devices from USB autosuspend (separate with spaces).
 # Use lsusb to get the ids.
 # Note: input devices (usbhid) are excluded automatically
 USB_AUTOSUSPEND=1
 
 # Exclude listed devices from USB autosuspend (separate with spaces).
 # Use lsusb to get the ids.
 # Note: input devices (usbhid) are excluded automatically

+# Default: <none>

 #USB_BLACKLIST="1111:2222 3333:4444"
 
 # Bluetooth devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.
 #USB_BLACKLIST="1111:2222 3333:4444"
 
 # Bluetooth devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.

+# Default: 0

 USB_BLACKLIST_BTUSB=0
 
 # Phone devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude (enable charging).
 USB_BLACKLIST_BTUSB=0
 
 # Phone devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude (enable charging).

+# Default: 0

 USB_BLACKLIST_PHONE=0
 
 # Printers are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.
 USB_BLACKLIST_PHONE=0
 
 # Printers are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.

+# Default: 1

 USB_BLACKLIST_PRINTER=1
 
 # WWAN devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.
 USB_BLACKLIST_PRINTER=1
 
 # WWAN devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.

-USB_BLACKLIST_WWAN=1
+# Default: 0
+USB_BLACKLIST_WWAN=0

 
 # Include listed devices into USB autosuspend even if already excluded
 
 # Include listed devices into USB autosuspend even if already excluded

-# by the blacklists above (separate with spaces).
-# Use lsusb to get the ids.
+# by the blacklists above (separate with spaces). Use lsusb to get the ids.
+# Default: <none>

 #USB_WHITELIST="1111:2222 3333:4444"
 
 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
 # (workaround for USB devices that cause shutdown problems).
 #USB_WHITELIST="1111:2222 3333:4444"
 
 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
 # (workaround for USB devices that cause shutdown problems).

+# Default: 0

 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
 
 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
 # on system startup: 0=disable, 1=enable.
 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
 
 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
 # on system startup: 0=disable, 1=enable.

-# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
-#   are ignored when this is enabled!
+# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+#   are ignored when this is enabled.
+# Default: 0

 #RESTORE_DEVICE_STATE_ON_STARTUP=0
 #RESTORE_DEVICE_STATE_ON_STARTUP=0

-RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=1

 
 # Radio devices to disable on startup: bluetooth, wifi, wwan.
 # Separate multiple devices with spaces.
 
 # Radio devices to disable on startup: bluetooth, wifi, wwan.
 # Separate multiple devices with spaces.

+# Default: <none>

 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"

-DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"

 
 # Radio devices to enable on startup: bluetooth, wifi, wwan.
 # Separate multiple devices with spaces.
 
 # Radio devices to enable on startup: bluetooth, wifi, wwan.
 # Separate multiple devices with spaces.

+# Default: <none>

 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
 
 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
 # (workaround for devices that are blocking shutdown).
 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
 
 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
 # (workaround for devices that are blocking shutdown).

+# Default: <none>

 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
 
 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
 # (to prevent other operating systems from missing radios).
 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
 
 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
 # (to prevent other operating systems from missing radios).

+# Default: <none>

 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
 
 # Radio devices to enable on AC: bluetooth, wifi, wwan.
 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
 
 # Radio devices to enable on AC: bluetooth, wifi, wwan.

+# Default: <none>

 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
 
 # Radio devices to disable on battery: bluetooth, wifi, wwan.
 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
 
 # Radio devices to disable on battery: bluetooth, wifi, wwan.

+# Default: <none>

 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"

+DEVICES_TO_DISABLE_ON_BAT="bluetooth"

 
 # Radio devices to disable on battery when not in use (not connected):
 #   bluetooth, wifi, wwan.
 
 # Radio devices to disable on battery when not in use (not connected):
 #   bluetooth, wifi, wwan.

+# Default: <none>

 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
 
 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
 # required). Charging starts when the remaining capacity falls below the
 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
 # Main / Internal battery (values in %)
 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
 
 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
 # required). Charging starts when the remaining capacity falls below the
 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
 # Main / Internal battery (values in %)

+# Default: <none>

 #START_CHARGE_THRESH_BAT0=75
 #STOP_CHARGE_THRESH_BAT0=80
 # Ultrabay / Slice / Replaceable battery (values in %)
 #START_CHARGE_THRESH_BAT0=75
 #STOP_CHARGE_THRESH_BAT0=80
 # Ultrabay / Slice / Replaceable battery (values in %)

+# Default: <none>

 #START_CHARGE_THRESH_BAT1=75
 #STOP_CHARGE_THRESH_BAT1=80
 
 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
 #START_CHARGE_THRESH_BAT1=75
 #STOP_CHARGE_THRESH_BAT1=80
 
 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.

+# Default: 0

 #RESTORE_THRESHOLDS_ON_BAT=1
 
 #RESTORE_THRESHOLDS_ON_BAT=1
 

+# Battery feature drivers: 0=disable, 1=enable
+# Default: 1 (all)
+NATACPI_ENABLE=1
+TPACPI_ENABLE=1
+TPSMAPI_ENABLE=1
+

 # ------------------------------------------------------------------------------
 # tlp-rdw - Parameters for the radio device wizard
 # Possible devices: bluetooth, wifi, wwan.
 
 # ------------------------------------------------------------------------------
 # tlp-rdw - Parameters for the radio device wizard
 # Possible devices: bluetooth, wifi, wwan.
 

-# Hints:
+# Notes:

 # - Parameters are disabled by default, remove the leading # to enable them
 # - Separate multiple radio devices with spaces
 
 # - Parameters are disabled by default, remove the leading # to enable them
 # - Separate multiple radio devices with spaces
 

+# Default: <none> (for all parameters below)
+

 # Radio devices to disable on connect.
 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
 # Radio devices to disable on connect.
 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"


@@ -3431,1214 +1881,3 @@ RESTORE_DEVICE_STATE_ON_STARTUP=1
 #DEVICES_TO_DISABLE_ON_UNDOCK=""
 #+end_src
 
 #DEVICES_TO_DISABLE_ON_UNDOCK=""
 #+end_src
 

-** X
-
-*** xprofile
-:PROPERTIES:
-:header-args+: :tangle ~/.xprofile
-:END:
-
-=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
-contrary, it's automatically sourced by LightDM, my display manager of
-choice.
-
-#+begin_src sh :tangle no
-xset -b  # disable bell
-xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
-
-# setxkbmap -option compose:ralt
-
-setxkbmap -option ctrl:nocaps          # turn capslock into control
-setxkbmap -option altwin:swap_alt_win  # swap alt and super
-
-if [ $(hostname) = "plasma" ]
-then
-    setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
-fi
-
-if [ $(hostname) = "enigma" ]
-then
-    xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
-fi
-
-light -Scrs "intel_backlight" 2
-
-source $HOME/.zprofile
-
-export _JAVA_AWT_WM_NONREPARENTING=1
-export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
-
-if [ $(hostname) = "plasma" ]
-then
-    unlock-def-gk.py &
-fi
-
-bspwm &
-#+end_src
-
-*** X resources
-
-**** Xresources
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
-:END:
-
-#+begin_src conf-xdefaults
-#include ".Xresources.d/fonts"
-! #include ".Xresources.d/colors"
-#include ".Xresources.d/emacs"
-#include ".Xresources.d/rxvt-unicode"
-#+end_src
-
-**** Xresources.d
-
-***** fonts
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
-:END:
-
-#+begin_src conf-xdefaults
-Xft.lcdfilter: lcddefault
-Xft.antialias: true
-Xft.autohint: 0
-Xft.hinting: true
-Xft.hintstyle: hintslight
-! Xft.hintstyle: hintfull
-Xft.rgba: rgb
-Xft.dpi: 96
-#+end_src
-
-***** colors
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
-:END:
-
-#+begin_src conf-xdefaults :tangle no
-#include "gruvbox-light.xresources"
-! #include "gruvbox-dark.xresources"
-#include "gruvbox-urxvt256.xresources"
-#+end_src
-
-#+begin_src conf-xdefaults :tangle no
-! -----------------------------------------------------------------------------
-! File: gruvbox-light.xresources
-! Description: Retro groove colorscheme generalized
-! Author: morhetz <morhetz@gmail.com>
-! Source: https://github.com/morhetz/gruvbox-generalized
-! Last Modified: 6 Sep 2014
-! -----------------------------------------------------------------------------
-
-! hard contrast: *background: #f9f5d7
-*background: #fbf1c7
-! soft contrast: *background: #f2e5bc
-*foreground: #3c3836
-! Black + DarkGrey
-*color0:  #fdf4c1
-*color8:  #928374
-! DarkRed + Red
-*color1:  #cc241d
-*color9:  #9d0006
-! DarkGreen + Green
-*color2:  #98971a
-*color10: #79740e
-! DarkYellow + Yellow
-*color3:  #d79921
-*color11: #b57614
-! DarkBlue + Blue
-*color4:  #458588
-*color12: #076678
-! DarkMagenta + Magenta
-*color5:  #b16286
-*color13: #8f3f71
-! DarkCyan + Cyan
-*color6:  #689d6a
-*color14: #427b58
-! LightGrey + White
-*color7:  #7c6f64
-*color15: #3c3836
-#+end_src
-
-#+begin_src conf-xdefaults :tangle no
-! -----------------------------------------------------------------------------
-! File: gruvbox-dark.xresources
-! Description: Retro groove colorscheme generalized
-! Author: morhetz <morhetz@gmail.com>
-! Source: https://github.com/morhetz/gruvbox-generalized
-! Last Modified: 6 Sep 2014
-! -----------------------------------------------------------------------------
-
-! hard contrast: *background: #1d2021
-*background: #282828
-! soft contrast: *background: #32302f
-*foreground: #ebdbb2
-! Black + DarkGrey
-*color0:  #282828
-*color8:  #928374
-! DarkRed + Red
-*color1:  #cc241d
-*color9:  #fb4934
-! DarkGreen + Green
-*color2:  #98971a
-*color10: #b8bb26
-! DarkYellow + Yellow
-*color3:  #d79921
-*color11: #fabd2f
-! DarkBlue + Blue
-*color4:  #458588
-*color12: #83a598
-! DarkMagenta + Magenta
-*color5:  #b16286
-*color13: #d3869b
-! DarkCyan + Cyan
-*color6:  #689d6a
-*color14: #8ec07c
-! LightGrey + White
-*color7:  #a89984
-*color15: #ebdbb2
-#+end_src
-
-#+begin_src conf-xdefaults :tangle no
-! -----------------------------------------------------------------------------
-! File: gruvbox-urxvt256.xresources
-! Description: Retro groove colorscheme generalized
-! Author: morhetz <morhetz@gmail.com>
-! Source: https://github.com/morhetz/gruvbox-generalized
-! Last Modified: 13 Dec 2013
-! -----------------------------------------------------------------------------
-
-URxvt.color24:  #076678
-URxvt.color66:  #427b58
-URxvt.color88:  #9d0006
-URxvt.color96:  #8f3f71
-URxvt.color100: #79740e
-URxvt.color108: #8ec07c
-URxvt.color109: #83a598
-URxvt.color130: #af3a03
-URxvt.color136: #b57614
-URxvt.color142: #b8bb26
-URxvt.color167: #fb4934
-URxvt.color175: #d3869b
-URxvt.color208: #fe8019
-URxvt.color214: #fabd2f
-URxvt.color223: #ebdbb2
-URxvt.color228: #f2e5bc
-URxvt.color229: #fbf1c7
-URxvt.color230: #f9f5d7
-URxvt.color234: #1d2021
-URxvt.color235: #282828
-URxvt.color236: #32302f
-URxvt.color237: #3c3836
-URxvt.color239: #504945
-URxvt.color241: #665c54
-URxvt.color243: #7c6f64
-URxvt.color244: #928374
-URxvt.color245: #928374
-URxvt.color246: #a89984
-URxvt.color248: #bdae93
-URxvt.color250: #d5c4a1
-#+end_src
-
-***** emacs
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
-:END:
-
-#+begin_src conf-xdefaults
-Emacs.menuBar: off
-Emacs.toolBar: off
-Emacs.verticalScrollBars: off
-Emacs.cursorBlink: off
-Emacs.FontBackend: xft,x
-! Emacs.font: Ubuntu Mono-12
-! Emacs.font: Triplicate T4C-11
-! Emacs.font: Ubuntu Mono-10.5
-! Emacs.font: Ubuntu Mono-12
-! Emacs.font: Iosevka-11
-
-! Emacs.font: Fira Mono:size=15
-! Emacs.font: DejaVu Sans Mono:size=15
-! Emacs.font: Inconsolata:size=17
-! Emacs.font: Inconsolata:size=16
-! Emacs.font: Inconsolata LGC:size=14
-! Emacs.font: Source Code Pro Medium-10.5
-Emacs.font: Source Code Pro:size=14
-! Emacs.font: Ubuntu Mono:size=16
-! Emacs.font: Iosevka:size=16
-#+end_src
-
-***** rxvt-unicode
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
-:END:
-
-#+begin_src conf-xdefaults
-! Font
-URxvt.font:             xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
-URxvt.boldFont:         xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
-URxvt.italicFont:       xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
-URxvt.bolditalicFont:   xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
-
-URxvt.xftAntialias:     true
-URxvt.letterSpace:      0
-
-URxvt.depth:                0
-URxvt.loginShell:           true
-URxvt.saveLines:            100000
-URxvt.internalBorder:       3
-URxvt.lineSpace:            0
-URxvt.scrollBar:            false
-URxvt.scrollStyle:          rxvt
-URxvt*scrollTtyOutput:      false
-URxvt*scrollWithBuffer:     true
-URxvt*scrollTtyKeypress:    true
-URxvt.keysym.Shift-Up:      command:\033]720;1\007
-URxvt.keysym.Shift-Down:    command:\033]721;1\007
-
-URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
-URxvt.url-select.launcher:  firefox
-URxvt.url-select.underline: true
-URxvt.keysym.M-u:           perl:url-select:select_next
-URxvt.keysym.M-Escape:      perl:keyboard-select:activate
-URxvt.keysym.M-s:           perl:keyboard-select:search
-URxvt.url-launcher:         /usr/bin/firefox
-URxvt.matcher.button:       1
-URxvt.iso14755:             false
-URxvt.iso14755_53:          false
-URxvt.keysym.M-c:           perl:clipboard:copy
-URxvt.keysym.M-v:           perl:clipboard:paste
-URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
-URxvt.keysym.C-Up:          font-size:increase
-URxvt.keysym.C-Down:        font-size:decrease
-URxvt.keysym.C-S-Up:        font-size:incglobal
-URxvt.keysym.C-S-Down:      font-size:decglobal
-URxvt.keysym.C-equal:       font-size:reset
-!URxvt.keysym.C-question:   font-size:show
-
-URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
-
-!urxvt*foreground: white
-!urxvt*background: black
-
-!*color0:  #2E3436
-!*color1:  #a40000
-!*color2:  #4E9A06
-!*color3:  #C4A000
-!*color4:  #3465A4
-!*color5:  #75507B
-!*color6:  #ce5c00
-!*color7:  #babdb9
-!*color8:  #555753
-!*color9:  #EF2929
-!*color10: #8AE234
-!*color11: #FCE94F
-!*color12: #729FCF
-!*color13: #AD7FA8
-!*color14: #fcaf3e
-!*color15: #EEEEEC
-
-!URxvt.foreground: #C8C8C8
-!URxvt.background: #FFFFFF
-
-!! black
-!*color0:  #2E3436
-!*color8:  #555753
-!! red
-!*color1:  #a40000
-!*color9:  #EF2929
-!! green
-!*color2:  #4E9A06
-!*color10: #8AE234
-!! yellow
-!*color3:  #C4A000
-!*color11: #FCE94F
-!! blue
-!*color4:  #3465A4
-!*color12: #729FCF
-!! purple
-!*color5:  #75507B
-!*color13: #AD7FA8
-!! orange (replaces cyan)
-!*color6:  #ce5c00
-!*color14: #fcaf3e
-!! white
-!*color7:  #babdb9
-!*color15: #EEEEEC
-
-! Tango colour theme for rxvt-unicode
-URxvt.background: #FFFFFF
-URxvt.foreground: #000000
-
-! Black
-URxvt.color0: #2E3436
-URxvt.color8: #757773
-
-! Red
-URxvt.color1: #CC0000
-URxvt.color9: #EF2929
-
-! Green
-URxvt.color2: #4E9A06
-URxvt.color10: #8AE234
-
-! Yellow
-URxvt.color3: #C4A000
-URxvt.color11: #FCE94F
-
-! Blue
-URxvt.color4: #3465A4
-URxvt.color12: #729FCF
-
-! Magenta
-URxvt.color5: #75507B
-URxvt.color13: #AD7FA8
-
-!! Cyan
-!URxvt.color6: #06989A
-!URxvt.color14: #34E2E2
-! orange (replaces cyan)
-,*color6:  #ce5c00
-,*color14: #fcaf3e
-
-! White
-URxvt.color7: #D3D7CF
-URxvt.color15: #EEEEEC
-#+end_src
-
-*** xkb us_ab keyboard layout
-
-#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
-default partial alphanumeric_keys
-xkb_symbols "us_ab" {
-    include "us(basic)"
-    name[Group1]= "English (US)(aminb)";
-
-    key <MENU> { [ Alt_R ] };
-};
-#+end_src
-
-** XDG
-:PROPERTIES:
-:header-args+: :tangle ~/.config/user-dirs.dirs
-:END:
-
-#+begin_src conf
-XDG_DESKTOP_DIR="$HOME/Desktop"
-XDG_DOCUMENTS_DIR="$HOME/usr/docs"
-XDG_DOWNLOAD_DIR="$HOME/usr/dls"
-XDG_MUSIC_DIR="$HOME/usr/music"
-XDG_PICTURES_DIR="$HOME/usr/pics"
-XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
-XDG_TEMPLATES_DIR="$HOME/usr/Templates"
-XDG_VIDEOS_DIR="$HOME/usr/vids"
-#+end_src
-
-** Zathura
-:PROPERTIES:
-:header-args+: :tangle ~/.config/zathura/zathurarc
-:END:
-
-#+begin_src conf
-set smooth-scroll true
-set selection-clipboard clipboard
-set zoom-step 05
-set default-bg "#272727"
-set statusbar-bg "#272727"
-set inputbar-bg "#373737"
-#+end_src
-
-** Zsh
-
-My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
-[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
-installed.
-
-*** zimrc
-:PROPERTIES:
-:header-args+: :tangle ~/.zimrc
-:END:
-
-#+begin_src sh
-
-
-#################
-# CORE SETTINGS #
-#################
-
-#
-# Zim settings
-#
-
-# Select what modules you would like enabled.
-# The second line of modules may depend on options set by modules in the first
-# line. These dependencies are noted on the respective module's README.md.
-zmodules=(directory environment git git-info history input ssh utility custom \
-          syntax-highlighting history-substring-search prompt completion)
-
-
-###################
-# MODULE SETTINGS #
-###################
-
-#
-# Prompt
-#
-
-# Set your desired prompt here
-zprompt_theme='pure'
-#PURE_PROMPT_SYMBOL=λ
-#PURE_PROMPT_SYMBOL=δ
-PURE_PROMPT_SYMBOL=➜
-
-#
-# Completion
-#
-
-# set an optional host-specific filename for the completion cache file
-# if none is provided, the default '.zcompdump' is used.
-#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
-
-#
-# Utility
-#
-
-# Uncomment to enable command correction prompts
-# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
-setopt CORRECT
-
-#
-# Environment
-#
-
-# Set the string below to the desired terminal title format string.
-# The terminal title is redrawn upon directory change, however, variables like 
-# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
-#   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
-# The example below uses the following format: 'username@host:/current/directory'
-ztermtitle='%n@%m:%~'
-
-#
-# Input
-#
-
-# Uncomment to enable double-dot expansion.
-# This appends '../' to your input for each '.' you type after an initial '..'
-#zdouble_dot_expand='true'
-
-#
-# Syntax-Highlighting
-#
-
-# This determines what highlighters will be used with the syntax-highlighting module.
-# Documentation of the highlighters can be found here:
-#   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
-# For (u)rxvt, termite and gnome-terminal users,
-# removing the 'cursor' highlighter will fix the disappearing cursor problem
-#zhighlighters=(main brackets cursor)
-zhighlighters=(main brackets pattern)
-
-
-#
-# SSH
-#
-
-# Load these ssh identities with the ssh module
-zssh_ids=(id_ed25519_bandali)
-
-
-#
-# Pacman
-#
-
-# Set (optional) pacman front-end.
-zpacman_frontend='yay'
-
-# Load any helper scripts as defined here
-#zpacman_helper=(aur)
-#+end_src
-
-*** zlogin
-:PROPERTIES:
-:header-args+: :tangle ~/.zlogin
-:END:
-
-#+begin_src sh
-
-
-#
-# User configuration sourced by login shells
-#
-
-# Initialize zim
-[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
-#+end_src
-
-*** zprofile
-:PROPERTIES:
-:header-args+: :tangle ~/.zprofile
-:END:
-
-#+begin_src sh
-#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
-#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
-export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
-export XDG_CONFIG_HOME=$HOME/.config
-export XDG_DATA_HOME=$HOME/.local/share
-export XDG_DATA_DIRS=/usr/local/share:/usr/share
-export MAILDIR="$HOME/mail"
-export CVS_RSH=ssh
-#export MATHMODELS=$HOME/src/eiffel/mathmodels
-#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
-#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
-
-# Eiffel2Java stuff
-#export JAVA_HOME=/usr/lib/jvm/default
-#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
-#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
-#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
-
-#export PATH="$HOME/usr/build/pvs:$PATH"
-#export SBCLISP_HOME=/usr/share/sbcl-source
-#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
-
-export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
-
-#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
-#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
-
-export NIXPKGS=$HOME/src/git/nixpkgs
-
-if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
-
-export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
-export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH"
-export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
-export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
-export GIT_SSL_CAINFO="$SSL_CERT_FILE"
-#+end_src
-
-*** zshenv
-:PROPERTIES:
-:header-args+: :tangle ~/.zshenv
-:END:
-
-#+begin_src sh
-# Ensure that a non-login, non-interactive shell has a defined environment.
-if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
-  source "${ZDOTDIR:-$HOME}/.zprofile"
-fi
-#+end_src
-
-*** zshrc
-:PROPERTIES:
-:header-args+: :tangle ~/.zshrc
-:END:
-
-#+begin_src sh
-# Bash-like navigation
-#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
-#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
-export WORDCHARS='*?[]~=&;!#$%^(){}<>'
-#ZLE_SPACE_SUFFIX_CHARS=$'|&'
-
-#disable -r time       # disable shell reserved word
-#alias time='time -p'  # -p for POSIX output
-
-# rehash if last command was pacaur or pacman
-# (so that zsh picks up changes in $PATH immediately)
-TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
-
-#
-# User configuration sourced by interactive shells
-#
-
-# Change default zim location
-export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
-
-# Start zim
-[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
-
-ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
-#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold' 
-
-setopt globdots
-
-source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
-# source ~/.zsh/zsh-autopair/autopair.zsh
-
-
-### fzf ###
-
-source /usr/share/fzf/key-bindings.zsh
-source /usr/share/fzf/completion.zsh
-
-# Accept history selection instead of putting it on
-# the command line
-fzf-history-widget-accept() {
-  fzf-history-widget
-  zle accept-line
-}
-#zle     -N   fzf-history-widget-accept
-#bindkey '^R' fzf-history-widget-accept
-
-# alt+c preview
-export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
-
-### fzf ###
-
-
-# aliases
-alias mpv="mpv --ytdl-format mp4"
-alias mv="mv -iv"
-alias cp="cp -iv"
-alias scl=systemctl
-alias jcl=journalctl
-alias m="mbsync uwaterloo; mbsync amin"
-alias best="youtube-dl -f best"
-alias sd="ssh deb"
-alias sf="ssh fp"
-alias sn="ssh nix"
-
-aur() {
-   cd ~/usr/build
-   git clone https://aur.archlinux.org/${1}.git
-   cd ${1}
-}
-
-# i-beam cursor
-echo -e "\033[5 q"
-#echo -e "\033[6 q"
-#+end_src
-
-* Scripts
-
-This section contains various useful scripts and the ones used by the
-programs above. For instance, =toggle-tablet= for switching to and
-from tablet mode on my X220T, =toggle-presentation-mode= for toggling
-Xfce's presentation mode which keeps the screen awake, and
-=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
-exact brightness value.
-
-** battery-percentage-time
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh :tangle no
-dbus_send() {
-       label=$1
-       dbus-send --print-reply=literal --system \
-               --dest=org.freedesktop.UPower \
-               /org/freedesktop/UPower/devices/battery_BAT0 \
-               org.freedesktop.DBus.Properties.Get \
-               string:org.freedesktop.UPower.Device \
-               string:"${label}" | awk '{print $3}'
-}
-
-perc=$(dbus_send 'Percentage')
-state=$(dbus_send 'State')
-
-if [ "$state" -eq 2 ]; then  # Discharging
-       secs=$(dbus_send 'TimeToEmpty')
-elif [ "$state" -eq 1 ]; then  # Charging
-       secs=$(dbus_send 'TimeToFull')
-fi
-
-printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
-#+end_src
-
-** my-i3status.py
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
-:END:
-
-#+begin_src python :comments none
-# -*- coding: utf-8 -*-
-
-# This script is a simple wrapper which prefixes each i3status line with custom
-# information. It is based on:
-# https://github.com/i3/i3status/blob/master/contrib/wrapper.py
-#
-# In ~/.i3status.conf, add the following line:
-#     output_format = "i3bar"
-# in the 'general' section.
-# Then, in ~/.config/i3/config or ~/.config/sway/config add:
-#     status_command i3status | my-i3status.py
-# in the 'bar' section.  Make sure my-i3status.py is in $PATH.
-#
-# © 2012 Valentin Haenel <valentin.haenel@gmx.de>
-# © 2018 Amin Bandali <bandali@gnu.org>
-#
-# This program is free software. It comes without any warranty, to the extent
-# permitted by applicable law. You can redistribute it and/or modify it under
-# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
-# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
-# details.
-
-import sys
-import json
-import os
-
-def get_nosleep():
-    """ Return true if ~/.nosleep exists. """
-    return os.path.isfile(os.path.expanduser("~/.nosleep"))
-
-def print_line(message):
-    """ Non-buffered printing to stdout. """
-    sys.stdout.write(message + '\n')
-    sys.stdout.flush()
-
-def read_line():
-    """ Interrupted respecting reader for stdin. """
-    # try reading a line, removing any extra whitespace
-    try:
-        line = sys.stdin.readline().strip()
-        # i3status sends EOF, or an empty line
-        if not line:
-            sys.exit(3)
-        return line
-    # exit on ctrl-c
-    except KeyboardInterrupt:
-        sys.exit()
-
-if __name__ == '__main__':
-    # Skip the first line which contains the version header.
-    print_line(read_line())
-
-    # The second line contains the start of the infinite array.
-    print_line(read_line())
-
-    while True:
-        line, prefix = read_line(), ''
-        # ignore comma at start of lines
-        if line.startswith(','):
-            line, prefix = line[1:], ','
-
-        if get_nosleep():
-            j = json.loads(line)
-            # insert information into the start of the json, but could be anywhere
-            j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
-            # and echo back new encoded json
-            print_line(prefix+json.dumps(j))
-        else:
-            print_line(prefix+line)
-#+end_src
-
-** rofi-light
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-cur=$(light -G)
-val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
-[ -n "$val" ] && light -S $val
-#+end_src
-
-** rofi-remmina.py
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
-:END:
-
-#+begin_src python
-import ConfigParser
-import os
-from subprocess import Popen, PIPE
-
-remmina_dir = os.path.expanduser("~/.local/share/remmina")
-
-fdict = dict()
-
-for f in os.listdir(remmina_dir):
-    fp = os.path.join(remmina_dir, f)
-    c = ConfigParser.ConfigParser()
-    c.read(fp)
-    n = c.get('remmina', 'name')
-    fdict[n] = fp
-
-lines = max(min(15, len(fdict)), 1);
-width = len(max(fdict.keys(), key=len))
-rofi = Popen(["rofi", "-i", "-dmenu", \
-              "-l", str(lines), "-width", str(width), \
-              "-p", "connection"], stdout=PIPE, stdin=PIPE)
-selected = rofi.communicate("\n" \
-                            .join(fdict.keys()) \
-                            .encode("utf-8"))[0] \
-               .decode("utf-8") \
-               .strip()
-rofi.wait()
-
-r = Popen(["remmina", "-c", fdict[selected]])
-r.wait()
-#+end_src
-
-** s (run sway)
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-export _JAVA_AWT_WM_NONREPARENTING=1
-export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
-light -Nr 2
-source $HOME/.zprofile
-sway
-#+end_src
-
-** sway-ws-util
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
-[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
-[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
-dest_ws=-1
-op=-1
-
-if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
-  op="$1"
-  if [ "$2" = "prev" ]; then
-    dest_ws="$prev_ws"
-  elif [ "$2" = "next" ]; then
-    dest_ws="$next_ws"
-  else
-    echo "Usage: $0 $1 {prev|next} [follow]"
-    exit 1
-  fi
-else
-  echo "Usage: $0 {switch|move} {prev|next} [follow]"
-  exit 1
-fi
-
-if [ "$op" = "switch" ]; then
-  sway workspace "$dest_ws"
-elif [ "$op" = "move" ]; then
-  sway move container to workspace "$dest_ws"
-  if [ "$3" = "follow" ]; then
-    sway workspace "$dest_ws"
-  fi
-fi
-#+end_src
-
-** toggle-layout
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash :tangle no
-lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
-
-if [ "$lang" = "us" ]; then
-    setxkbmap ir
-else
-    setxkbmap us
-    # xmodmap $HOME/.Xmodmap
-fi
-#+end_src
-
-** toggle-presentation-mode
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash :tangle no
-xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
-#+end_src
-
-** toggle-tablet
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
-:END:
-
-This script toggles between a 'normal' mode and a 'tablet' mode, doing
-a few things:
-
-- rotates the screen using =xrandr=, so that rotating the physical
-  display of my X220t would have the laptop's battery on the right
-  hand side,
-- enables touch screen,
-- properly rotates the stylus pen and touch screen pointers, and
-- toggles between RGB and Vertical BGR sub-pixel order.
-
-#+begin_src bash :tangle no
-case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
-    0)  # Screen is not rotated, we should rotate it right (90°)
-           xrandr -o 3
-           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
-           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
-           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
-           xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
-           ;;
-    1)  # Currently top is rotated right, we should set it normal (0°)
-          xrandr -o 0
-          xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
-          xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
-          xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
-          xfconf-query -c xsettings -p /Xft/RGBA -s rgb
-          ;;
-    *)
-           echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
-           exit 1
-           ;;
-esac
-#+end_src
-
-** unlock-def-gk.py
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
-:END:
-
-#+begin_src python :tangle no
-import gnomekeyring as gk
-# list_item_ids_sync('login')[0] == 1L
-gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
-#+end_src
-
-** volume-info
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh :tangle no
-cur_vol=$(pamixer --get-volume)
-
-if [ $(pamixer --get-mute) = true ]; then
-  printf 'mt \n' "$cur_vol"
-else
-  printf '%02d \n' "$cur_vol"
-fi
-#+end_src
-
-** wp
-
-My little wallpaper changer script.
-
-*** wp
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash :tangle no
-export DISPLAY=:0
-
-case "$1" in
-  "day")
-    feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
-    ;;
-  "night")
-    feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
-    ;;
-  *)
-    echo $"Usage: $0 {day|night}"
-    exit 1
-esac
-#+end_src
-
-*** wp-auto
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash :tangle no
-SED=$(which sed)
-ROFI=$(which rofi)
-
-export DISPLAY=:0
-HOUR=$(date +%H)
-
-if [ -z "${SED}" ]
-then
-    echo "Did not find 'sed', script cannot continue."
-    exit 1
-fi
-if [ -z "${ROFI}" ]
-then
-    echo "Did not find rofi, there is no point to continue."
-    exit 1
-fi
-
-###
-# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
-# Repeated calls should leave the config clean-ish
-###
-function set_theme()
-{
-    CDIR="${HOME}/.config/rofi/"
-    if [ ! -d "${CDIR}" ]
-    then
-        mkdir -p ${CDIR}
-    fi
-    if [ -f "${CDIR}/config" ]
-    then
-        ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
-    fi
-    echo "rofi.theme: ${1}" >> "${CDIR}/config"
-
-}
-
-if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
-    then
-        feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
-        xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
-        set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
-    else
-        feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
-        xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
-        set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
-fi
-#+end_src
-
-*** wp.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/wp.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=wallpaper service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
-#+end_src
-
-*** wp.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/wp.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-[Unit]
-Description=wallpaper timer
-
-[Timer]
-OnCalendar=07,21:00
-Unit=wp.service
-Persistent=true
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** zathura-sync.sh
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-pos="$1"
-pdffile="$2"
-zathura --synctex-forward "$pos" "$pdffile" || \
-    (
-    zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
-    sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
-#+end_src
-** Fun :)
-
-*** eat-em
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
-# [ESC] character in original post removed here.
-
-# ANSI Color -- use these variables to easily have different color
-#    and format output. Make sure to output the reset sequence after
-#    colors (f = foreground, b = background), and use the 'off'
-#    feature for anything you turn on.
-
-initializeANSI()
-{
- esc="$(echo -en '\e')"
-
-  blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
-  yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
-  cyanf="${esc}[36m";    whitef="${esc}[37m"
-
-  blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
-  yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
-  cyanb="${esc}[46m";    whiteb="${esc}[47m"
-
-  boldon="${esc}[1m";    boldoff="${esc}[22m"
-  italicson="${esc}[3m"; italicsoff="${esc}[23m"
-  ulon="${esc}[4m";      uloff="${esc}[24m"
-  invon="${esc}[7m";     invoff="${esc}[27m"
-
-  reset="${esc}[0m"
-}
-
-# note in this first use that switching colors doesn't require a reset
-# first - the new color overrides the old one.
-
-#clear
-
-initializeANSI
-
-cat << EOF
-
- ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
- ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
- ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
- ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
- ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
- ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
-
- ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
- ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
- ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
- ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
- ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
- ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
-
-EOF
-#+end_src
-
-*** invade-em
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-#
-# ANSI color scheme script featuring Space Invaders
-#
-# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
-# Modified by lolilolicon
-#
-
-f=3 b=4
-for j in f b; do
-  for i in {0..7}; do
-    printf -v $j$i %b "\e[${!j}${i}m"
-  done
-done
-bld=$'\e[1m'
-rst=$'\e[0m'
-
-cat << EOF
-
- $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
- $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
- $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
- $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
-
- $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
- $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
- $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
- $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
-
-
-                                     $f7▌$rst
-
-                                   $f7▌$rst
-
-                              $f7    ▄█▄    $rst
-                              $f7▄█████████▄$rst
-                              $f7▀▀▀▀▀▀▀▀▀▀▀$rst
-
-EOF
-#+end_src