;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.
-;; Configuration Layers
-;; --------------------
-
-(setq-default
- ;; List of additional paths where to look for configuration layers.
- ;; Paths must have a trailing slash (ie. `~/.mycontribs/')
- dotspacemacs-configuration-layer-path '()
- ;; List of configuration layers to load.
- dotspacemacs-configuration-layers '(mu4e evil git c-c++ auctex html)
- ;; A list of packages and/or extensions that will not be install and loaded.
- dotspacemacs-excluded-packages '()
-)
-
-;; Settings
-;; --------
-
-(setq-default
- ;; Specify the startup banner. If the value is an integer then the
- ;; banner with the corresponding index is used, if the value is `random'
- ;; then the banner is chosen randomly among the available banners, if
- ;; the value is nil then no banner is displayed.
- dotspacemacs-startup-banner 001
- ;; List of themes, the first of the list is loaded when spacemacs starts.
- ;; Press <SPC> T n to cycle to the next theme in the list (works great
- ;; with 2 themes variants, one dark and one light)
- dotspacemacs-themes '(zenburn)
- ;; The leader key
- dotspacemacs-leader-key "SPC"
- ;; Major mode leader key is a shortcut key which is the equivalent of
- ;; pressing `<leader> m`
- dotspacemacs-major-mode-leader-key ","
- ;; The command key used for Evil commands (ex-commands) and
- ;; Emacs commands (M-x).
- ;; By default the command key is `:' so ex-commands are executed like in Vim
- ;; with `:' and Emacs commands are executed with `<leader> :'.
- dotspacemacs-command-key ":"
- ;; Guide-key delay in seconds. The Guide-key is the popup buffer listing
- ;; the commands bound to the current keystrokes.
- dotspacemacs-guide-key-delay 0.4
- ;; If non nil the frame is fullscreen when Emacs starts up (Emacs 24.4+ only).
- dotspacemacs-fullscreen-at-startup nil
- ;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
- ;; Use to disable fullscreen animations in OSX."
- dotspacemacs-fullscreen-use-non-native nil
- ;; If non nil the frame is maximized when Emacs starts up (Emacs 24.4+ only).
- ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
- dotspacemacs-maximized-at-startup nil
- ;; A value from the range (0..100), in increasing opacity, which describes the
- ;; transparency level of a frame when it's active or selected. Transparency can
- ;; be toggled through `toggle-transparency'.
- dotspacemacs-active-transparency 90
- ;; A value from the range (0..100), in increasing opacity, which describes the
- ;; transparency level of a frame when it's inactive or deselected. Transparency
- ;; can be toggled through `toggle-transparency'.
- dotspacemacs-inactive-transparency 90
- ;; If non nil unicode symbols are displayed in the mode line (e.g. for lighters)
- dotspacemacs-mode-line-unicode-symbols t
- ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth scrolling
- ;; overrides the default behavior of Emacs which recenters the point when
- ;; it reaches the top or bottom of the screen
- dotspacemacs-smooth-scrolling t
- ;; If non-nil smartparens-strict-mode will be enabled in programming modes.
- dotspacemacs-smartparens-strict-mode nil
- ;; If non nil advises quit functions to keep server open when quitting.
- dotspacemacs-persistent-server nil
- ;; The default package repository used if no explicit repository has been
- ;; specified with an installed package.
- ;; Not used for now.
- dotspacemacs-default-package-repository nil
- ;; Disable setting the cursor color according to states
- dotspacemacs-colorize-cursor-according-to-state nil
- ;; font
- dotspacemacs-default-font '("Source Code Pro for Powerline"
- :size 14
- :weight normal
- :width normal
- :powerline-scale 1.1)
- )
-
-;; Initialization Hooks
-;; --------------------
+(defun dotspacemacs/layers ()
+ "Configuration Layers declaration."
+ (setq-default
+ ;; List of additional paths where to look for configuration layers.
+ ;; Paths must have a trailing slash (ie. `~/.mycontribs/')
+ dotspacemacs-configuration-layer-path '()
+ ;; List of configuration layers to load. If it is the symbol `all' instead
+ ;; of a list then all discovered layers will be installed.
+ dotspacemacs-configuration-layers
+ '(
+ ;; ----------------------------------------------------------------
+ ;; Example of useful layers you may want to use right away.
+ ;; Uncomment some layer names and press <SPC f e R> (Vim style) or
+ ;; <M-m f e R> (Emacs style) to install them.
+ ;; ----------------------------------------------------------------
+ auto-completion
+ better-defaults
+ emacs-lisp
+ git
+ markdown
+ org
+ (shell :variables
+ shell-default-height 30
+ shell-default-position 'bottom)
+ syntax-checking
+ mu4e
+ c-c++
+ latex
+ ;; (haskell :variables '(haskell-enable-hindent-style "chris-done"
+ ;; haskell-enable-shm-support t))
+ version-control
+ )
+ ;; List of additional packages that will be installed wihout being
+ ;; wrapped in a layer. If you need some configuration for these
+ ;; packages then consider to create a layer, you can also put the
+ ;; configuration in `dotspacemacs/config'.
+ dotspacemacs-additional-packages '()
+ ;; A list of packages and/or extensions that will not be install and loaded.
+ dotspacemacs-excluded-packages '()
+ ;; If non-nil spacemacs will delete any orphan packages, i.e. packages that
+ ;; are declared in a layer which is not a member of
+ ;; the list `dotspacemacs-configuration-layers'
+ dotspacemacs-delete-orphan-packages t))
(defun dotspacemacs/init ()
- "User initialization for Spacemacs. This function is called at the very
- startup."
+ "Initialization function.
+This function is called at the very startup of Spacemacs initialization
+before layers configuration."
+ ;; This setq-default sexp is an exhaustive list of all the supported
+ ;; spacemacs settings.
+ (setq-default
+ ;; Either `vim' or `emacs'. Evil is always enabled but if the variable
+ ;; is `emacs' then the `holy-mode' is enabled at startup.
+ dotspacemacs-editing-style 'vim
+ ;; If non nil output loading progress in `*Messages*' buffer.
+ dotspacemacs-verbose-loading nil
+ ;; Specify the startup banner. Default value is `official', it displays
+ ;; the official spacemacs logo. An integer value is the index of text
+ ;; banner, `random' chooses a random text banner in `core/banners'
+ ;; directory. A string value must be a path to an image format supported
+ ;; by your Emacs build.
+ ;; If the value is nil then no banner is displayed.
+ dotspacemacs-startup-banner 'official
+ ;; List of items to show in the startup buffer. If nil it is disabled.
+ ;; Possible values are: `recents' `bookmarks' `projects'."
+ dotspacemacs-startup-lists '(recents projects)
+ ;; List of themes, the first of the list is loaded when spacemacs starts.
+ ;; Press <SPC> T n to cycle to the next theme in the list (works great
+ ;; with 2 themes variants, one dark and one light)
+ dotspacemacs-themes '(solarized-light
+ gotham
+ leuven
+ solarized-dark
+ spacemacs-light
+ spacemacs-dark
+ monokai
+ zenburn)
+ ;; If non nil the cursor color matches the state color.
+ dotspacemacs-colorize-cursor-according-to-state t
+ ;; Default font. `powerline-scale' allows to quickly tweak the mode-line
+ ;; size to make separators look not too crappy.
+ dotspacemacs-default-font '("Source Code Pro"
+ :size 13
+ :weight normal
+ :width normal
+ :powerline-scale 1.1)
+ ;; The leader key
+ dotspacemacs-leader-key "SPC"
+ ;; The leader key accessible in `emacs state' and `insert state'
+ dotspacemacs-emacs-leader-key "M-m"
+ ;; Major mode leader key is a shortcut key which is the equivalent of
+ ;; pressing `<leader> m`. Set it to `nil` to disable it.
+ dotspacemacs-major-mode-leader-key ","
+ ;; Major mode leader key accessible in `emacs state' and `insert state'
+ dotspacemacs-major-mode-emacs-leader-key "C-M-m"
+ ;; The command key used for Evil commands (ex-commands) and
+ ;; Emacs commands (M-x).
+ ;; By default the command key is `:' so ex-commands are executed like in Vim
+ ;; with `:' and Emacs commands are executed with `<leader> :'.
+ dotspacemacs-command-key ":"
+ ;; Location where to auto-save files. Possible values are `original' to
+ ;; auto-save the file in-place, `cache' to auto-save the file to another
+ ;; file stored in the cache directory and `nil' to disable auto-saving.
+ ;; Default value is `cache'.
+ dotspacemacs-auto-save-file-location 'cache
+ ;; If non nil then `ido' replaces `helm' for some commands. For now only
+ ;; `find-files' (SPC f f) is replaced.
+ dotspacemacs-use-ido t
+ ;; If non nil the paste micro-state is enabled. When enabled pressing `p`
+ ;; several times cycle between the kill ring content.
+ dotspacemacs-enable-paste-micro-state nil
+ ;; Guide-key delay in seconds. The Guide-key is the popup buffer listing
+ ;; the commands bound to the current keystrokes.
+ dotspacemacs-guide-key-delay 0.4
+ ;; If non nil a progress bar is displayed when spacemacs is loading. This
+ ;; may increase the boot time on some systems and emacs builds, set it to
+ ;; nil ;; to boost the loading time.
+ dotspacemacs-loading-progress-bar t
+ ;; If non nil the frame is fullscreen when Emacs starts up.
+ ;; (Emacs 24.4+ only)
+ dotspacemacs-fullscreen-at-startup nil
+ ;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
+ ;; Use to disable fullscreen animations in OSX."
+ dotspacemacs-fullscreen-use-non-native nil
+ ;; If non nil the frame is maximized when Emacs starts up.
+ ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
+ ;; (Emacs 24.4+ only)
+ dotspacemacs-maximized-at-startup nil
+ ;; A value from the range (0..100), in increasing opacity, which describes
+ ;; the transparency level of a frame when it's active or selected.
+ ;; Transparency can be toggled through `toggle-transparency'.
+ dotspacemacs-active-transparency 90
+ ;; A value from the range (0..100), in increasing opacity, which describes
+ ;; the transparency level of a frame when it's inactive or deselected.
+ ;; Transparency can be toggled through `toggle-transparency'.
+ dotspacemacs-inactive-transparency 90
+ ;; If non nil unicode symbols are displayed in the mode line.
+ dotspacemacs-mode-line-unicode-symbols t
+ ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth
+ ;; scrolling overrides the default behavior of Emacs which recenters the
+ ;; point when it reaches the top or bottom of the screen.
+ dotspacemacs-smooth-scrolling t
+ ;; If non-nil smartparens-strict-mode will be enabled in programming modes.
+ dotspacemacs-smartparens-strict-mode nil
+ ;; Select a scope to highlight delimiters. Possible value is `all',
+ ;; `current' or `nil'. Default is `all'
+ dotspacemacs-highlight-delimiters 'all
+ ;; If non nil advises quit functions to keep server open when quitting.
+ dotspacemacs-persistent-server nil
+ ;; List of search tool executable names. Spacemacs uses the first installed
+ ;; tool of the list. Supported tools are `ag', `pt', `ack' and `grep'.
+ dotspacemacs-search-tools '("ag" "pt" "ack" "grep")
+ ;; The default package repository used if no explicit repository has been
+ ;; specified with an installed package.
+ ;; Not used for now.
+ dotspacemacs-default-package-repository nil
+ ;; Disable setting the cursor color according to states
+ dotspacemacs-colorize-cursor-according-to-state nil
+ )
+ ;; User initialization goes here
)
(defun dotspacemacs/config ()
- "This is were you can ultimately override default Spacemacs configuration.
-This function is called at the very end of Spacemacs initialization."
+ "Configuration function.
+ This function is called at the very end of Spacemacs initialization after
+layers configuration."
(setq powerline-default-separator nil)
(setq TeX-PDF-mode t
Tex-command-default 'TeX)
-)
+ (setq undo-tree-auto-save-history t
+ undo-tree-history-directory-alist
+ `(("." . ,(concat spacemacs-cache-directory "undo"))))
+ (unless (file-exists-p (concat spacemacs-cache-directory "undo"))
+ (make-directory (concat spacemacs-cache-directory "undo")))
-;; Custom variables
-;; ----------------
+ (setq TeX-view-program-selection
+ '(((output-dvi style-pstricks)
+ "dvips and gv")
+ (output-dvi "xdvi")
+ (output-pdf "zathura")
+ (output-html "xdg-open")))
-;; Do not write anything in this section. This is where Emacs will
-;; auto-generate custom variable definitions.
+ (setq TeX-view-program-list
+ '(("zathura"
+ ("zathura" (mode-io-correlate "-sync.sh")
+ " "
+ (mode-io-correlate "%n:1:%t ")
+ "%o"))))
+ (advice-add #'magit-key-mode-popup-committing :after
+ (lambda ()
+ (magit-key-mode-toggle-option (quote committing) "--verbose")))
+ ;; Suppress ad-handle-definition warnings
+ ;; (annoying "`tramp-read-passwd' got redefined" warning on startup)
+ (setq ad-redefinition-action 'accept)
+
+ (define-key evil-motion-state-map ";" 'evil-ex)
+
+ ;; not very effective because of dotspacemacs-command-key
+ ;; (define-key evil-motion-state-map ":" 'evil-repeat-find-char)
+
+ ;; enable when using zenburn
+ ;; (custom-set-faces '(evil-search-highlight-persist-highlight-face ((t (:background "#5F5F5F")))))
+)
+
+;; Do not write anything past this comment. This is where Emacs will
+;; auto-generate custom variable definitions.
(custom-set-variables
;; custom-set-variables was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
- '(ac-ispell-requires 4)
'(ahs-case-fold-search nil)
'(ahs-default-range (quote ahs-range-whole-buffer))
'(ahs-idle-interval 0.25)
'(ahs-idle-timer 0 t)
'(ahs-inhibit-face-list nil)
- '(ring-bell-function (quote ignore) t)
- '(send-mail-function (quote smtpmail-send-it)))
+ '(ansi-color-faces-vector
+ [default default default italic underline success warning error])
+ '(ansi-color-names-vector
+ ["#272822" "#F92672" "#A6E22E" "#E6DB74" "#66D9EF" "#FD5FF0" "#A1EFE4" "#F8F8F2"])
+ '(compilation-message-face (quote default))
+ '(cua-global-mark-cursor-color "#2aa198")
+ '(cua-normal-cursor-color "#839496")
+ '(cua-overwrite-cursor-color "#b58900")
+ '(cua-read-only-cursor-color "#859900")
+ '(highlight-changes-colors ("#FD5FF0" "#AE81FF"))
+ '(highlight-symbol-colors
+ (--map
+ (solarized-color-blend it "#002b36" 0.25)
+ (quote
+ ("#b58900" "#2aa198" "#dc322f" "#6c71c4" "#859900" "#cb4b16" "#268bd2"))))
+ '(highlight-symbol-foreground-color "#93a1a1")
+ '(highlight-tail-colors
+ (quote
+ (("#49483E" . 0)
+ ("#67930F" . 20)
+ ("#349B8D" . 30)
+ ("#21889B" . 50)
+ ("#968B26" . 60)
+ ("#A45E0A" . 70)
+ ("#A41F99" . 85)
+ ("#49483E" . 100))))
+ '(hl-bg-colors
+ (quote
+ ("#7B6000" "#8B2C02" "#990A1B" "#93115C" "#3F4D91" "#00629D" "#00736F" "#546E00")))
+ '(hl-fg-colors
+ (quote
+ ("#002b36" "#002b36" "#002b36" "#002b36" "#002b36" "#002b36" "#002b36" "#002b36")))
+ '(magit-diff-use-overlays nil)
+ '(magit-use-overlays nil)
+ '(package-selected-packages
+ (quote
+ (company-auctex auctex company-c-headers cmake-mode clang-format toc-org smeargle shell-pop org-repo-todo org-present org-pomodoro org-bullets multi-term mmm-mode markdown-toc magit-svn magit-gitflow htmlize helm-gitignore helm-flyspell helm-c-yasnippet gitconfig-mode gitattributes-mode git-timemachine git-messenger flycheck-pos-tip evil-org company-statistics company-quickhelp auto-yasnippet ac-ispell auto-complete company flycheck yasnippet request gitignore-mode magit git-rebase-mode git-commit-mode markdown-mode alert log4e gntp zenburn-theme monokai-theme macrostep elisp-slime-nav diff-hl window-numbering volatile-highlights vi-tilde-fringe use-package smooth-scrolling rfringe rainbow-delimiters powerline popup pcre2el paradox page-break-lines open-junk-file neotree move-text linum-relative leuven-theme info+ indent-guide ido-vertical-mode hungry-delete hl-anything highlight-parentheses highlight-numbers highlight-indentation helm-themes helm-swoop helm-projectile helm-mode-manager helm-make helm-descbinds helm-ag guide-key-tip google-translate golden-ratio gh-md fringe-helper flx-ido fill-column-indicator fancy-battery expand-region exec-path-from-shell evil-visualstar evil-tutor evil-terminal-cursor-changer evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-matchit evil-lisp-state evil-jumper evil-indent-textobject evil-iedit-state evil-exchange evil-escape evil-args evil-anzu eval-sexp-fu clean-aindent-mode buffer-move auto-highlight-symbol auto-dictionary aggressive-indent adaptive-wrap ace-window ace-link ace-jump-mode)))
+ '(pos-tip-background-color "#073642")
+ '(pos-tip-foreground-color "#93a1a1")
+ '(ring-bell-function (quote ignore))
+ '(smartrep-mode-line-active-bg (solarized-color-blend "#859900" "#073642" 0.2))
+ '(term-default-bg-color "#002b36")
+ '(term-default-fg-color "#839496")
+ '(vc-annotate-background nil)
+ '(vc-annotate-color-map
+ (quote
+ ((20 . "#F92672")
+ (40 . "#CF4F1F")
+ (60 . "#C26C0F")
+ (80 . "#E6DB74")
+ (100 . "#AB8C00")
+ (120 . "#A18F00")
+ (140 . "#989200")
+ (160 . "#8E9500")
+ (180 . "#A6E22E")
+ (200 . "#729A1E")
+ (220 . "#609C3C")
+ (240 . "#4E9D5B")
+ (260 . "#3C9F79")
+ (280 . "#A1EFE4")
+ (300 . "#299BA6")
+ (320 . "#2896B5")
+ (340 . "#2790C3")
+ (360 . "#66D9EF"))))
+ '(vc-annotate-very-old-color nil)
+ '(weechat-color-list
+ (unspecified "#272822" "#49483E" "#A20C41" "#F92672" "#67930F" "#A6E22E" "#968B26" "#E6DB74" "#21889B" "#66D9EF" "#A41F99" "#FD5FF0" "#349B8D" "#A1EFE4" "#F8F8F2" "#F8F8F0")))
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
- )
+ '(company-tooltip-common ((t (:inherit company-tooltip :weight bold :underline nil))))
+ '(company-tooltip-common-selection ((t (:inherit company-tooltip-selection :weight bold :underline nil)))))
projects / ~bandali / configs / blobdiff