;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.
-;; Configuration Layers
-;; --------------------
-
-(setq-default
- ;; List of additional paths where to look for configuration layers.
- ;; Paths must have a trailing slash (ie. `~/.mycontribs/')
- dotspacemacs-configuration-layer-path '()
- ;; List of configuration layers to load.
- dotspacemacs-configuration-layers '(mu4e evil git c-c++ auctex html)
- ;; A list of packages and/or extensions that will not be install and loaded.
- dotspacemacs-excluded-packages '()
-)
-
-;; Settings
-;; --------
-
-(setq-default
- ;; Specify the startup banner. If the value is an integer then the
- ;; banner with the corresponding index is used, if the value is `random'
- ;; then the banner is chosen randomly among the available banners, if
- ;; the value is nil then no banner is displayed.
- dotspacemacs-startup-banner 001
- ;; List of themes, the first of the list is loaded when spacemacs starts.
- ;; Press <SPC> T n to cycle to the next theme in the list (works great
- ;; with 2 themes variants, one dark and one light)
- dotspacemacs-themes '(zenburn)
- ;; The leader key
- dotspacemacs-leader-key "SPC"
- ;; Major mode leader key is a shortcut key which is the equivalent of
- ;; pressing `<leader> m`
- dotspacemacs-major-mode-leader-key ","
- ;; The command key used for Evil commands (ex-commands) and
- ;; Emacs commands (M-x).
- ;; By default the command key is `:' so ex-commands are executed like in Vim
- ;; with `:' and Emacs commands are executed with `<leader> :'.
- dotspacemacs-command-key ":"
- ;; Guide-key delay in seconds. The Guide-key is the popup buffer listing
- ;; the commands bound to the current keystrokes.
- dotspacemacs-guide-key-delay 0.4
- ;; If non nil the frame is fullscreen when Emacs starts up (Emacs 24.4+ only).
- dotspacemacs-fullscreen-at-startup nil
- ;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
- ;; Use to disable fullscreen animations in OSX."
- dotspacemacs-fullscreen-use-non-native nil
- ;; If non nil the frame is maximized when Emacs starts up (Emacs 24.4+ only).
- ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
- dotspacemacs-maximized-at-startup nil
- ;; A value from the range (0..100), in increasing opacity, which describes the
- ;; transparency level of a frame when it's active or selected. Transparency can
- ;; be toggled through `toggle-transparency'.
- dotspacemacs-active-transparency 90
- ;; A value from the range (0..100), in increasing opacity, which describes the
- ;; transparency level of a frame when it's inactive or deselected. Transparency
- ;; can be toggled through `toggle-transparency'.
- dotspacemacs-inactive-transparency 90
- ;; If non nil unicode symbols are displayed in the mode line (e.g. for lighters)
- dotspacemacs-mode-line-unicode-symbols t
- ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth scrolling
- ;; overrides the default behavior of Emacs which recenters the point when
- ;; it reaches the top or bottom of the screen
- dotspacemacs-smooth-scrolling t
- ;; If non-nil smartparens-strict-mode will be enabled in programming modes.
- dotspacemacs-smartparens-strict-mode nil
- ;; If non nil advises quit functions to keep server open when quitting.
- dotspacemacs-persistent-server nil
- ;; The default package repository used if no explicit repository has been
- ;; specified with an installed package.
- ;; Not used for now.
- dotspacemacs-default-package-repository nil
- ;; Disable setting the cursor color according to states
- dotspacemacs-colorize-cursor-according-to-state nil
- ;; font
- dotspacemacs-default-font '("Source Code Pro for Powerline"
- :size 14
- :weight normal
- :width normal
- :powerline-scale 1.1)
- )
-
-;; Initialization Hooks
-;; --------------------
+(defun dotspacemacs/layers ()
+ "Configuration Layers declaration.
+You should not put any user code in this function besides modifying the variable
+values."
+ (setq-default
+ ;; Base distribution to use. This is a layer contained in the directory
+ ;; `+distribution'. For now available distributions are `spacemacs-base'
+ ;; or `spacemacs'. (default 'spacemacs)
+ dotspacemacs-distribution 'spacemacs
+ ;; List of additional paths where to look for configuration layers.
+ ;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
+ dotspacemacs-configuration-layer-path '()
+ ;; List of configuration layers to load. If it is the symbol `all' instead
+ ;; of a list then all discovered layers will be installed.
+ dotspacemacs-configuration-layers
+ '(
+ ;; ----------------------------------------------------------------
+ ;; Example of useful layers you may want to use right away.
+ ;; Uncomment some layer names and press <SPC f e R> (Vim style) or
+ ;; <M-m f e R> (Emacs style) to install them.
+ ;; ----------------------------------------------------------------
+ auto-completion
+ better-defaults
+ emacs-lisp
+ git
+ markdown
+ org
+ (shell :variables
+ shell-default-height 30
+ shell-default-position 'bottom)
+ spell-checking
+ syntax-checking
+ ;; mu4e
+ c-c++
+ java
+ latex
+ ;; erc
+ ;; irc
+ ;; themes-megapack
+ ;; music
+ ;; (ranger :variables
+ ;; ranger-show-preview t)
+ xkcd
+ ;; (haskell :variables '(haskell-enable-hindent-style "chris-done"
+ ;; haskell-enable-shm-support t))
+ ;; version-control
+ )
+ ;; List of additional packages that will be installed without being
+ ;; wrapped in a layer. If you need some configuration for these
+ ;; packages then consider to create a layer, you can also put the
+ ;; configuration in `dotspacemacs/user-config'.
+ dotspacemacs-additional-packages '()
+ ;; A list of packages and/or extensions that will not be install and loaded.
+ dotspacemacs-excluded-packages '()
+ ;; If non-nil spacemacs will delete any orphan packages, i.e. packages that
+ ;; are declared in a layer which is not a member of
+ ;; the list `dotspacemacs-configuration-layers'. (default t)
+ dotspacemacs-delete-orphan-packages t))
(defun dotspacemacs/init ()
- "User initialization for Spacemacs. This function is called at the very
- startup."
+ "Initialization function.
+This function is called at the very startup of Spacemacs initialization
+before layers configuration.
+You should not put any user code in there besides modifying the variable
+values."
+ ;; This setq-default sexp is an exhaustive list of all the supported
+ ;; spacemacs settings.
+ (setq-default
+ ;; If non nil ELPA repositories are contacted via HTTPS whenever it's
+ ;; possible. Set it to nil if you have no way to use HTTPS in your
+ ;; environment, otherwise it is strongly recommended to let it set to t.
+ ;; This variable has no effect if Emacs is launched with the parameter
+ ;; `--insecure' which forces the value of this variable to nil.
+ ;; (default t)
+ dotspacemacs-elpa-https t
+ ;; Maximum allowed time in seconds to contact an ELPA repository.
+ dotspacemacs-elpa-timeout 5
+ ;; If non nil then spacemacs will check for updates at startup
+ ;; when the current branch is not `develop'. (default t)
+ dotspacemacs-check-for-update t
+ ;; One of `vim', `emacs' or `hybrid'. Evil is always enabled but if the
+ ;; variable is `emacs' then the `holy-mode' is enabled at startup. `hybrid'
+ ;; uses emacs key bindings for vim's insert mode, but otherwise leaves evil
+ ;; unchanged. (default 'vim)
+ dotspacemacs-editing-style 'vim
+ ;; If non nil output loading progress in `*Messages*' buffer. (default nil)
+ dotspacemacs-verbose-loading nil
+ ;; Specify the startup banner. Default value is `official', it displays
+ ;; the official spacemacs logo. An integer value is the index of text
+ ;; banner, `random' chooses a random text banner in `core/banners'
+ ;; directory. A string value must be a path to an image format supported
+ ;; by your Emacs build.
+ ;; If the value is nil then no banner is displayed. (default 'official)
+ dotspacemacs-startup-banner 'official
+ ;; List of items to show in the startup buffer. If nil it is disabled.
+ ;; Possible values are: `recents' `bookmarks' `projects'.
+ ;; (default '(recents projects))
+ dotspacemacs-startup-lists '(recents projects)
+ ;; Number of recent files to show in the startup buffer. Ignored if
+ ;; `dotspacemacs-startup-lists' doesn't include `recents'. (default 5)
+ dotspacemacs-startup-recent-list-size 5
+ ;; List of themes, the first of the list is loaded when spacemacs starts.
+ ;; Press <SPC> T n to cycle to the next theme in the list (works great
+ ;; with 2 themes variants, one dark and one light)
+ dotspacemacs-themes '(spacemacs-dark
+ spacemacs-light
+ solarized-light
+ solarized-dark
+ leuven
+ monokai
+ zenburn)
+ ;; If non nil the cursor color matches the state color in GUI Emacs.
+ dotspacemacs-colorize-cursor-according-to-state t
+ ;; Default font. `powerline-scale' allows to quickly tweak the mode-line
+ ;; size to make separators look not too crappy.
+ dotspacemacs-default-font '("Source Code Pro"
+ :size 13
+ :weight normal
+ :width normal
+ :powerline-scale 1.1)
+ ;; The leader key
+ dotspacemacs-leader-key "SPC"
+ ;; The leader key accessible in `emacs state' and `insert state'
+ ;; (default "M-m")
+ dotspacemacs-emacs-leader-key "M-m"
+ ;; Major mode leader key is a shortcut key which is the equivalent of
+ ;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
+ dotspacemacs-major-mode-leader-key ","
+ ;; Major mode leader key accessible in `emacs state' and `insert state'.
+ ;; (default "C-M-m)
+ dotspacemacs-major-mode-emacs-leader-key "C-M-m"
+ ;; These variables control whether separate commands are bound in the GUI to
+ ;; the key pairs C-i, TAB and C-m, RET.
+ ;; Setting it to a non-nil value, allows for separate commands under <C-i>
+ ;; and TAB or <C-m> and RET.
+ ;; In the terminal, these pairs are generally indistinguishable, so this only
+ ;; works in the GUI. (default nil)
+ dotspacemacs-distinguish-gui-tab nil
+ ;; (Not implemented) dotspacemacs-distinguish-gui-ret nil
+ ;; The command key used for Evil commands (ex-commands) and
+ ;; Emacs commands (M-x).
+ ;; By default the command key is `:' so ex-commands are executed like in Vim
+ ;; with `:' and Emacs commands are executed with `<leader> :'.
+ dotspacemacs-command-key ":"
+ ;; If non nil `Y' is remapped to `y$'. (default t)
+ dotspacemacs-remap-Y-to-y$ t
+ ;; Name of the default layout (default "Default")
+ dotspacemacs-default-layout-name "Default"
+ ;; If non nil the default layout name is displayed in the mode-line.
+ ;; (default nil)
+ dotspacemacs-display-default-layout nil
+ ;; If non nil then the last auto saved layouts are resume automatically upon
+ ;; start. (default nil)
+ dotspacemacs-auto-resume-layouts nil
+ ;; Location where to auto-save files. Possible values are `original' to
+ ;; auto-save the file in-place, `cache' to auto-save the file to another
+ ;; file stored in the cache directory and `nil' to disable auto-saving.
+ ;; (default 'cache)
+ dotspacemacs-auto-save-file-location 'cache
+ ;; Maximum number of rollback slots to keep in the cache. (default 5)
+ dotspacemacs-max-rollback-slots 5
+ ;; If non nil then `ido' replaces `helm' for some commands. For now only
+ ;; `find-files' (SPC f f), `find-spacemacs-file' (SPC f e s), and
+ ;; `find-contrib-file' (SPC f e c) are replaced. (default nil)
+ dotspacemacs-use-ido nil
+ ;; If non nil, `helm' will try to minimize the space it uses. (default nil)
+ dotspacemacs-helm-resize nil
+ ;; if non nil, the helm header is hidden when there is only one source.
+ ;; (default nil)
+ dotspacemacs-helm-no-header nil
+ ;; define the position to display `helm', options are `bottom', `top',
+ ;; `left', or `right'. (default 'bottom)
+ dotspacemacs-helm-position 'bottom
+ ;; If non nil the paste micro-state is enabled. When enabled pressing `p`
+ ;; several times cycle between the kill ring content. (default nil)
+ dotspacemacs-enable-paste-micro-state nil
+ ;; Which-key delay in seconds. The which-key buffer is the popup listing
+ ;; the commands bound to the current keystroke sequence. (default 0.4)
+ dotspacemacs-which-key-delay 0.4
+ ;; Which-key frame position. Possible values are `right', `bottom' and
+ ;; `right-then-bottom'. right-then-bottom tries to display the frame to the
+ ;; right; if there is insufficient space it displays it at the bottom.
+ ;; (default 'bottom)
+ dotspacemacs-which-key-position 'bottom
+ ;; If non nil a progress bar is displayed when spacemacs is loading. This
+ ;; may increase the boot time on some systems and emacs builds, set it to
+ ;; nil to boost the loading time. (default t)
+ dotspacemacs-loading-progress-bar t
+ ;; If non nil the frame is fullscreen when Emacs starts up. (default nil)
+ ;; (Emacs 24.4+ only)
+ dotspacemacs-fullscreen-at-startup nil
+ ;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
+ ;; Use to disable fullscreen animations in OSX. (default nil)
+ dotspacemacs-fullscreen-use-non-native nil
+ ;; If non nil the frame is maximized when Emacs starts up.
+ ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
+ ;; (default nil) (Emacs 24.4+ only)
+ dotspacemacs-maximized-at-startup nil
+ ;; A value from the range (0..100), in increasing opacity, which describes
+ ;; the transparency level of a frame when it's active or selected.
+ ;; Transparency can be toggled through `toggle-transparency'. (default 90)
+ dotspacemacs-active-transparency 90
+ ;; A value from the range (0..100), in increasing opacity, which describes
+ ;; the transparency level of a frame when it's inactive or deselected.
+ ;; Transparency can be toggled through `toggle-transparency'. (default 90)
+ dotspacemacs-inactive-transparency 90
+ ;; If non nil unicode symbols are displayed in the mode line. (default t)
+ dotspacemacs-mode-line-unicode-symbols t
+ ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth
+ ;; scrolling overrides the default behavior of Emacs which recenters the
+ ;; point when it reaches the top or bottom of the screen. (default t)
+ dotspacemacs-smooth-scrolling t
+ ;; If non nil line numbers are turned on in all `prog-mode' and `text-mode'
+ ;; derivatives. If set to `relative', also turns on relative line numbers.
+ ;; (default nil)
+ dotspacemacs-line-numbers nil
+ ;; If non-nil smartparens-strict-mode will be enabled in programming modes.
+ ;; (default nil)
+ dotspacemacs-smartparens-strict-mode nil
+ ;; Select a scope to highlight delimiters. Possible values are `any',
+ ;; `current', `all' or `nil'. Default is `all' (highlight any scope and
+ ;; emphasis the current one). (default 'all)
+ dotspacemacs-highlight-delimiters 'all
+ ;; If non nil advises quit functions to keep server open when quitting.
+ ;; (default nil)
+ dotspacemacs-persistent-server nil
+ ;; List of search tool executable names. Spacemacs uses the first installed
+ ;; tool of the list. Supported tools are `ag', `pt', `ack' and `grep'.
+ ;; (default '("ag" "pt" "ack" "grep"))
+ dotspacemacs-search-tools '("ag" "pt" "ack" "grep")
+ ;; The default package repository used if no explicit repository has been
+ ;; specified with an installed package.
+ ;; Not used for now. (default nil)
+ dotspacemacs-default-package-repository nil
+ ;; Delete whitespace while saving buffer. Possible values are `all',
+ ;; `trailing', `changed' or `nil'. Default is `changed' (cleanup whitespace
+ ;; on changed lines) (default 'changed)
+ dotspacemacs-whitespace-cleanup 'changed
+ ;; Disable setting the cursor color according to states
+ ;; dotspacemacs-colorize-cursor-according-to-state nil
+ ))
+
+(defun dotspacemacs/user-init ()
+ "Initialization function for user code.
+It is called immediately after `dotspacemacs/init'. You are free to put almost any
+user code here. The exception is org related code, which should be placed in
+`dotspacemacs/user-config'."
)
-(defun dotspacemacs/config ()
- "This is were you can ultimately override default Spacemacs configuration.
-This function is called at the very end of Spacemacs initialization."
- (setq powerline-default-separator nil)
+(defun dotspacemacs/user-config ()
+ "Configuration function for user code.
+This function is called at the very end of Spacemacs initialization after
+layers configuration. You are free to put any user code."
+ ;; (setq powerline-default-separator nil)
(setq TeX-PDF-mode t
Tex-command-default 'TeX)
-)
+ (setq undo-tree-auto-save-history t
+ undo-tree-history-directory-alist
+ `(("." . ,(concat spacemacs-cache-directory "undo"))))
+ (unless (file-exists-p (concat spacemacs-cache-directory "undo"))
+ (make-directory (concat spacemacs-cache-directory "undo")))
-;; Custom variables
-;; ----------------
+ (setq TeX-view-program-selection
+ '(((output-dvi style-pstricks)
+ "dvips and gv")
+ (output-dvi "xdvi")
+ (output-pdf "zathura")
+ (output-html "xdg-open")))
-;; Do not write anything in this section. This is where Emacs will
-;; auto-generate custom variable definitions.
+ (setq TeX-view-program-list
+ '(("zathura"
+ ("zathura" (mode-io-correlate "-sync.sh")
+ " "
+ (mode-io-correlate "%n:1:%t ")
+ "%o"))))
+
+ ;; set the erc nick completion postfix to ": "
+ ;; (setq erc-pcomplete-nick-postfix ", ")
+ ;; Suppress ad-handle-definition warnings
+ ;; (annoying "`tramp-read-passwd' got redefined" warning on startup)
+ ;; (setq ad-redefinition-action 'accept)
+ (define-key evil-motion-state-map ";" 'evil-ex)
+
+ ;; not very effective because of dotspacemacs-command-key
+ ;; (define-key evil-motion-state-map ":" 'evil-repeat-find-char)
+
+ ;; enable when using zenburn
+ ;; (custom-set-faces '(evil-search-highlight-persist-highlight-face ((t (:background "#5F5F5F")))))
+
+ ;; set Eclipse and Eclim paths
+ ;; (setq eclim-eclipse-dirs "/usr/lib/eclipse"
+ ;; eclim-executable "/usr/lib/eclipse/eclim")
+
+ ;; required for having working previews when using ranger
+ ;; (add-hook 'dired-mode-hook 'evil-emacs-state)
+
+ ;; (add-hook 'mpc-mode-hook 'evil-emacs-state)
+ ;; (add-hook 'simple-mpc-mode-hook 'evil-emacs-state)
+ ;; (add-hook 'simple-mpc-current-playlist-mode-hook 'evil-emacs-state)
+)
+
+;; Do not write anything past this comment. This is where Emacs will
+;; auto-generate custom variable definitions.
(custom-set-variables
;; custom-set-variables was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
- '(ac-ispell-requires 4)
- '(ahs-case-fold-search nil)
- '(ahs-default-range (quote ahs-range-whole-buffer))
- '(ahs-idle-interval 0.25)
- '(ahs-idle-timer 0 t)
- '(ahs-inhibit-face-list nil)
- '(ring-bell-function (quote ignore) t)
- '(send-mail-function (quote smtpmail-send-it)))
+ '(package-selected-packages
+ (quote
+ (orgit markdown-mode gitignore-mode flycheck farmhouse-theme company badwolf-theme auctex-latexmk auctex popup avy highlight helm helm-core package-build bind-key evil ws-butler persp-mode lorem-ipsum hl-todo help-fns+ evil-indent-plus ace-jump-helm-line bind-map zonokai-theme zenburn-theme zen-and-art-theme xkcd window-numbering which-key volatile-highlights vi-tilde-fringe use-package underwater-theme ujelly-theme twilight-theme twilight-bright-theme twilight-anti-bright-theme tronesque-theme toxi-theme toc-org tao-theme tangotango-theme tango-plus-theme tango-2-theme sunny-day-theme sublime-themes subatomic256-theme subatomic-theme stekene-theme spray spacemacs-theme spaceline spacegray-theme soothe-theme soft-stone-theme soft-morning-theme soft-charcoal-theme smyx-theme smooth-scrolling smeargle simple-mpc shell-pop seti-theme reverse-theme restart-emacs ranger rainbow-delimiters quelpa pyvenv pytest pyenv-mode purple-haze-theme professional-theme popwin planet-theme pip-requirements phoenix-dark-pink-theme phoenix-dark-mono-theme pcre2el pastels-on-dark-theme paradox page-break-lines organic-green-theme org-repo-todo org-present org-pomodoro org-plus-contrib org-bullets open-junk-file oldlace-theme occidental-theme obsidian-theme noctilux-theme niflheim-theme neotree naquadah-theme mustang-theme multi-term move-text monochrome-theme molokai-theme moe-theme mmm-mode minimal-theme material-theme markdown-toc magit-gitflow macrostep lush-theme linum-relative light-soap-theme leuven-theme jbeans-theme jazz-theme ir-black-theme inkpot-theme info+ indent-guide ido-vertical-mode hy-mode hungry-delete htmlize highlight-parentheses highlight-numbers highlight-indentation heroku-theme hemisu-theme helm-themes helm-swoop helm-pydoc helm-projectile helm-mode-manager helm-make helm-gitignore helm-flyspell helm-flx helm-descbinds helm-company helm-c-yasnippet helm-ag hc-zenburn-theme gruvbox-theme gruber-darker-theme grandshell-theme gotham-theme google-translate golden-ratio gnuplot gitconfig-mode gitattributes-mode git-timemachine git-messenger gh-md gandalf-theme flycheck-pos-tip flx-ido flatui-theme flatland-theme firebelly-theme fill-column-indicator fancy-battery expand-region exec-path-from-shell evil-visualstar evil-tutor evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-magit evil-lisp-state evil-jumper evil-indent-textobject evil-iedit-state evil-exchange evil-escape evil-args evil-anzu eval-sexp-fu espresso-theme eshell-prompt-extras esh-help erc-yt erc-view-log erc-social-graph erc-image erc-hl-nicks emacs-eclim elisp-slime-nav django-theme disaster define-word darktooth-theme darkmine-theme darkburn-theme dakrone-theme cython-mode cyberpunk-theme company-statistics company-quickhelp company-c-headers company-auctex company-anaconda colorsarenice-theme color-theme-sanityinc-tomorrow color-theme-sanityinc-solarized cmake-mode clues-theme clean-aindent-mode clang-format circe cherry-blossom-theme busybee-theme buffer-move bubbleberry-theme birds-of-paradise-plus-theme auto-yasnippet auto-highlight-symbol auto-dictionary auto-compile apropospriate-theme anti-zenburn-theme ample-zen-theme ample-theme alect-themes aggressive-indent afternoon-theme adaptive-wrap ace-window ace-link ac-ispell))))
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
- )
+ '(company-tooltip-common ((t (:inherit company-tooltip :weight bold :underline nil))))
+ '(company-tooltip-common-selection ((t (:inherit company-tooltip-selection :weight bold :underline nil)))))
projects / ~bandali / configs / blobdiff