;; `+distribution'. For now available distributions are `spacemacs-base'
;; or `spacemacs'. (default 'spacemacs)
dotspacemacs-distribution 'spacemacs
+ ;; Lazy installation of layers (i.e. layers are installed only when a file
+ ;; with a supported type is opened). Possible values are `all', `unused'
+ ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
+ ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
+ ;; lazy install any layer that support lazy installation even the layers
+ ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
+ ;; installation feature and you have to explicitly list a layer in the
+ ;; variable `dotspacemacs-configuration-layers' to install it.
+ ;; (default 'unused)
+ dotspacemacs-enable-lazy-installation 'unused
+ ;; If non-nil then Spacemacs will ask for confirmation before installing
+ ;; a layer lazily. (default t)
+ dotspacemacs-ask-for-lazy-installation t
;; If non-nil layers with lazy install support are lazy installed.
- ;; (default nil)
- dotspacemacs-enable-lazy-installation nil
;; List of additional paths where to look for configuration layers.
;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
dotspacemacs-configuration-layer-path '()
- ;; List of configuration layers to load. If it is the symbol `all' instead
- ;; of a list then all discovered layers will be installed.
+ ;; List of configuration layers to load.
dotspacemacs-configuration-layers
'(
- ;; ----------------------------------------------------------------
- ;; Example of useful layers you may want to use right away.
- ;; Uncomment some layer names and press <SPC f e R> (Vim style) or
- ;; <M-m f e R> (Emacs style) to install them.
- ;; ----------------------------------------------------------------
- spacemacs-helm
+ aminb
auto-completion
- ;; better-defaults
+ (better-defaults :variables
+ better-defaults-move-to-beginning-of-code-first t
+ better-defaults-move-to-end-of-code-first t)
+ bibtex
+ c-c++
emacs-lisp
git
+ haskell
+ html
+ ;; idris
+ ivy
+ ;; javascript
latex
markdown
org
- rust
+ ;; python
+ ;; racket
+ ;; rust
(shell :variables
- shell-default-height 30
- shell-default-position 'bottom)
+ shell-default-height 30
+ shell-default-position 'bottom)
+ shell-scripts
spell-checking
syntax-checking
;; version-control
+ ;; yaml
)
;; List of additional packages that will be installed without being
;; wrapped in a layer. If you need some configuration for these
;; packages, then consider creating a layer. You can also put the
;; configuration in `dotspacemacs/user-config'.
dotspacemacs-additional-packages '()
- ;; A list of packages and/or extensions that will not be install and loaded.
+ ;; A list of packages that cannot be updated.
+ dotspacemacs-frozen-packages '()
+ ;; A list of packages that will not be installed and loaded.
dotspacemacs-excluded-packages '()
- ;; If non-nil spacemacs will delete any orphan packages, i.e. packages that
- ;; are declared in a layer which is not a member of
- ;; the list `dotspacemacs-configuration-layers'. (default t)
- dotspacemacs-delete-orphan-packages t))
+ ;; Defines the behaviour of Spacemacs when installing packages.
+ ;; Possible values are `used-only', `used-but-keep-unused' and `all'.
+ ;; `used-only' installs only explicitly used packages and uninstall any
+ ;; unused packages as well as their unused dependencies.
+ ;; `used-but-keep-unused' installs only the used packages but won't uninstall
+ ;; them if they become unused. `all' installs *all* packages supported by
+ ;; Spacemacs and never uninstall them. (default is `used-only')
+ dotspacemacs-install-packages 'used-only))
(defun dotspacemacs/init ()
"Initialization function.
;; This setq-default sexp is an exhaustive list of all the supported
;; spacemacs settings.
(setq-default
- ;; If non nil ELPA repositories are contacted via HTTPS whenever it's
+ ;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
;; possible. Set it to nil if you have no way to use HTTPS in your
;; environment, otherwise it is strongly recommended to let it set to t.
;; This variable has no effect if Emacs is launched with the parameter
dotspacemacs-elpa-https t
;; Maximum allowed time in seconds to contact an ELPA repository.
dotspacemacs-elpa-timeout 5
- ;; If non nil then spacemacs will check for updates at startup
- ;; when the current branch is not `develop'. (default t)
- dotspacemacs-check-for-update t
- ;; One of `vim', `emacs' or `hybrid'. Evil is always enabled but if the
- ;; variable is `emacs' then the `holy-mode' is enabled at startup. `hybrid'
- ;; uses emacs key bindings for vim's insert mode, but otherwise leaves evil
- ;; unchanged. (default 'vim)
- dotspacemacs-editing-style 'vim
- ;; If non nil output loading progress in `*Messages*' buffer. (default nil)
+ ;; If non-nil then spacemacs will check for updates at startup
+ ;; when the current branch is not `develop'. Note that checking for
+ ;; new versions works via git commands, thus it calls GitHub services
+ ;; whenever you start Emacs. (default nil)
+ dotspacemacs-check-for-update nil
+ ;; If non-nil, a form that evaluates to a package directory. For example, to
+ ;; use different package directories for different Emacs versions, set this
+ ;; to `emacs-version'.
+ dotspacemacs-elpa-subdirectory nil
+ ;; One of `vim', `emacs' or `hybrid'.
+ ;; `hybrid' is like `vim' except that `insert state' is replaced by the
+ ;; `hybrid state' with `emacs' key bindings. The value can also be a list
+ ;; with `:variables' keyword (similar to layers). Check the editing styles
+ ;; section of the documentation for details on available variables.
+ ;; (default 'vim)
+ dotspacemacs-editing-style 'emacs
+ ;; If non-nil output loading progress in `*Messages*' buffer. (default nil)
dotspacemacs-verbose-loading nil
;; Specify the startup banner. Default value is `official', it displays
;; the official spacemacs logo. An integer value is the index of text
;; by your Emacs build.
;; If the value is nil then no banner is displayed. (default 'official)
dotspacemacs-startup-banner 'official
- ;; List of items to show in the startup buffer. If nil it is disabled.
- ;; Possible values are: `recents' `bookmarks' `projects' `agenda' `todos'.
- ;; (default '(recents projects))
- dotspacemacs-startup-lists '(recents projects)
- ;; Number of recent files to show in the startup buffer. Ignored if
- ;; `dotspacemacs-startup-lists' doesn't include `recents'. (default 5)
- dotspacemacs-startup-recent-list-size 5
+ ;; List of items to show in startup buffer or an association list of
+ ;; the form `(list-type . list-size)`. If nil then it is disabled.
+ ;; Possible values for list-type are:
+ ;; `recents' `bookmarks' `projects' `agenda' `todos'."
+ ;; List sizes may be nil, in which case
+ ;; `spacemacs-buffer-startup-lists-length' takes effect.
+ dotspacemacs-startup-lists '((recents . 5)
+ (projects . 7))
+ ;; True if the home buffer should respond to resize events.
+ dotspacemacs-startup-buffer-responsive t
;; Default major mode of the scratch buffer (default `text-mode')
dotspacemacs-scratch-mode 'text-mode
;; List of themes, the first of the list is loaded when spacemacs starts.
;; Press <SPC> T n to cycle to the next theme in the list (works great
;; with 2 themes variants, one dark and one light)
dotspacemacs-themes '(spacemacs-dark
- spacemacs-light
- solarized-light
- solarized-dark
- leuven
- monokai
- zenburn)
- ;; If non nil the cursor color matches the state color in GUI Emacs.
+ spacemacs-light)
+ ;; If non-nil the cursor color matches the state color in GUI Emacs.
dotspacemacs-colorize-cursor-according-to-state t
- ;; Default font. `powerline-scale' allows to quickly tweak the mode-line
- ;; size to make separators look not too crappy.
- dotspacemacs-default-font '("Source Code Pro"
- :size 14
+ ;; Default font, or prioritized list of fonts. `powerline-scale' allows to
+ ;; quickly tweak the mode-line size to make separators look not too crappy.
+ dotspacemacs-default-font '("Inconsolata"
+ :size 15
:weight normal
:width normal
:powerline-scale 1.6)
;; The leader key
dotspacemacs-leader-key "SPC"
+ ;; The key used for Emacs commands (M-x) (after pressing on the leader key).
+ ;; (default "SPC")
+ dotspacemacs-emacs-command-key "SPC"
+ ;; The key used for Vim Ex commands (default ":")
+ dotspacemacs-ex-command-key ":"
;; The leader key accessible in `emacs state' and `insert state'
;; (default "M-m")
- dotspacemacs-emacs-leader-key "M-m"
+ dotspacemacs-emacs-leader-key "S-SPC"
;; Major mode leader key is a shortcut key which is the equivalent of
;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
dotspacemacs-major-mode-leader-key ","
;; Major mode leader key accessible in `emacs state' and `insert state'.
- ;; (default "C-M-m)
- dotspacemacs-major-mode-emacs-leader-key "C-M-m"
- ;; The key used for Emacs commands (M-x) (after pressing on the leader key).
- ;; (default "SPC")
- dotspacemacs-emacs-command-key "SPC"
+ ;; (default "C-M-m")
+ dotspacemacs-major-mode-emacs-leader-key "M-SPC"
;; These variables control whether separate commands are bound in the GUI to
;; the key pairs C-i, TAB and C-m, RET.
;; Setting it to a non-nil value, allows for separate commands under <C-i>
;; In the terminal, these pairs are generally indistinguishable, so this only
;; works in the GUI. (default nil)
dotspacemacs-distinguish-gui-tab nil
- ;; If non nil `Y' is remapped to `y$' in Evil states. (default nil)
+ ;; If non-nil `Y' is remapped to `y$' in Evil states. (default nil)
dotspacemacs-remap-Y-to-y$ nil
- ;; If non nil, inverse the meaning of `g' in `:substitute' Evil ex-command.
+ ;; If non-nil, the shift mappings `<' and `>' retain visual state if used
+ ;; there. (default t)
+ dotspacemacs-retain-visual-state-on-shift t
+ ;; If non-nil, J and K move lines up and down when in visual mode.
+ ;; (default nil)
+ dotspacemacs-visual-line-move-text nil
+ ;; If non-nil, inverse the meaning of `g' in `:substitute' Evil ex-command.
;; (default nil)
dotspacemacs-ex-substitute-global nil
;; Name of the default layout (default "Default")
dotspacemacs-default-layout-name "Default"
- ;; If non nil the default layout name is displayed in the mode-line.
+ ;; If non-nil the default layout name is displayed in the mode-line.
;; (default nil)
dotspacemacs-display-default-layout nil
- ;; If non nil then the last auto saved layouts are resume automatically upon
+ ;; If non-nil then the last auto saved layouts are resume automatically upon
;; start. (default nil)
dotspacemacs-auto-resume-layouts nil
+ ;; Size (in MB) above which spacemacs will prompt to open the large file
+ ;; literally to avoid performance issues. Opening a file literally means that
+ ;; no major mode or minor modes are active. (default is 1)
+ dotspacemacs-large-file-size 1
;; Location where to auto-save files. Possible values are `original' to
;; auto-save the file in-place, `cache' to auto-save the file to another
;; file stored in the cache directory and `nil' to disable auto-saving.
dotspacemacs-auto-save-file-location 'cache
;; Maximum number of rollback slots to keep in the cache. (default 5)
dotspacemacs-max-rollback-slots 5
- ;; If non nil then `ido' replaces `helm' for some commands. For now only
- ;; `find-files' (SPC f f), `find-spacemacs-file' (SPC f e s), and
- ;; `find-contrib-file' (SPC f e c) are replaced. (default nil)
- dotspacemacs-use-ido nil
- ;; If non nil, `helm' will try to minimize the space it uses. (default nil)
+ ;; If non-nil, `helm' will try to minimize the space it uses. (default nil)
dotspacemacs-helm-resize nil
- ;; if non nil, the helm header is hidden when there is only one source.
+ ;; if non-nil, the helm header is hidden when there is only one source.
;; (default nil)
dotspacemacs-helm-no-header nil
;; define the position to display `helm', options are `bottom', `top',
;; `left', or `right'. (default 'bottom)
dotspacemacs-helm-position 'bottom
- ;; If non nil the paste micro-state is enabled. When enabled pressing `p`
+ ;; Controls fuzzy matching in helm. If set to `always', force fuzzy matching
+ ;; in all non-asynchronous sources. If set to `source', preserve individual
+ ;; source settings. Else, disable fuzzy matching in all sources.
+ ;; (default 'always)
+ dotspacemacs-helm-use-fuzzy 'always
+ ;; If non-nil the paste micro-state is enabled. When enabled pressing `p`
;; several times cycle between the kill ring content. (default nil)
dotspacemacs-enable-paste-transient-state nil
;; Which-key delay in seconds. The which-key buffer is the popup listing
;; right; if there is insufficient space it displays it at the bottom.
;; (default 'bottom)
dotspacemacs-which-key-position 'bottom
- ;; If non nil a progress bar is displayed when spacemacs is loading. This
+ ;; Control where `switch-to-buffer' displays the buffer. If nil,
+ ;; `switch-to-buffer' displays the buffer in the current window even if
+ ;; another same-purpose window is available. If non-nil, `switch-to-buffer'
+ ;; displays the buffer in a same-purpose window even if the buffer can be
+ ;; displayed in the current window. (default nil)
+ dotspacemacs-switch-to-buffer-prefers-purpose nil
+ ;; If non-nil a progress bar is displayed when spacemacs is loading. This
;; may increase the boot time on some systems and emacs builds, set it to
;; nil to boost the loading time. (default t)
dotspacemacs-loading-progress-bar t
- ;; If non nil the frame is fullscreen when Emacs starts up. (default nil)
+ ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
;; (Emacs 24.4+ only)
dotspacemacs-fullscreen-at-startup nil
- ;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
+ ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
;; Use to disable fullscreen animations in OSX. (default nil)
dotspacemacs-fullscreen-use-non-native nil
- ;; If non nil the frame is maximized when Emacs starts up.
+ ;; If non-nil the frame is maximized when Emacs starts up.
;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
;; (default nil) (Emacs 24.4+ only)
dotspacemacs-maximized-at-startup nil
;; the transparency level of a frame when it's inactive or deselected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-inactive-transparency 90
- ;; If non nil show the titles of transient states. (default t)
+ ;; If non-nil show the titles of transient states. (default t)
dotspacemacs-show-transient-state-title t
- ;; If non nil show the color guide hint for transient state keys. (default t)
+ ;; If non-nil show the color guide hint for transient state keys. (default t)
dotspacemacs-show-transient-state-color-guide t
- ;; If non nil unicode symbols are displayed in the mode line. (default t)
+ ;; If non-nil unicode symbols are displayed in the mode line. (default t)
dotspacemacs-mode-line-unicode-symbols t
- ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth
+ ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
;; scrolling overrides the default behavior of Emacs which recenters point
;; when it reaches the top or bottom of the screen. (default t)
dotspacemacs-smooth-scrolling t
- ;; If non nil line numbers are turned on in all `prog-mode' and `text-mode'
+ ;; If non-nil line numbers are turned on in all `prog-mode' and `text-mode'
;; derivatives. If set to `relative', also turns on relative line numbers.
;; (default nil)
dotspacemacs-line-numbers nil
+ ;; Code folding method. Possible values are `evil' and `origami'.
+ ;; (default 'evil)
+ dotspacemacs-folding-method 'evil
;; If non-nil smartparens-strict-mode will be enabled in programming modes.
;; (default nil)
dotspacemacs-smartparens-strict-mode nil
+ ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
+ ;; over any automatically added closing parenthesis, bracket, quote, etc…
+ ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
+ dotspacemacs-smart-closing-parenthesis nil
;; Select a scope to highlight delimiters. Possible values are `any',
;; `current', `all' or `nil'. Default is `all' (highlight any scope and
;; emphasis the current one). (default 'all)
dotspacemacs-highlight-delimiters 'all
- ;; If non nil advises quit functions to keep server open when quitting.
+ ;; If non-nil, advise quit functions to keep server open when quitting.
;; (default nil)
dotspacemacs-persistent-server nil
;; List of search tool executable names. Spacemacs uses the first installed
- ;; tool of the list. Supported tools are `ag', `pt', `ack' and `grep'.
- ;; (default '("ag" "pt" "ack" "grep"))
- dotspacemacs-search-tools '("ag" "pt" "ack" "grep")
+ ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
+ ;; (default '("rg" "ag" "pt" "ack" "grep"))
+ dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
;; The default package repository used if no explicit repository has been
;; specified with an installed package.
;; Not used for now. (default nil)
;; delete only whitespace for changed lines or `nil' to disable cleanup.
;; (default nil)
dotspacemacs-whitespace-cleanup nil
- ;; Disable setting the cursor color according to states
- ;; dotspacemacs-colorize-cursor-according-to-state nil
))
(defun dotspacemacs/user-init ()
"Initialization function for user code.
-It is called immediately after `dotspacemacs/init'. You are free to put almost
-any user code here. The exception is org related code, which should be placed
-in `dotspacemacs/user-config'."
+It is called immediately after `dotspacemacs/init', before layer configuration
+executes.
+ This function is mostly useful for variables that need to be set
+before packages are loaded. If you are unsure, you should try in setting them in
+`dotspacemacs/user-config' first."
)
(defun dotspacemacs/user-config ()
"Configuration function for user code.
This function is called at the very end of Spacemacs initialization after
-layers configuration. You are free to put any user code."
+layers configuration.
+This is the place where most of your configurations should be done. Unless it is
+explicitly specified that a variable should be set before a package is loaded,
+you should place your code here."
+
(setq powerline-default-separator 'slant)
- ;; (setq undo-tree-auto-save-history t
- ;; undo-tree-history-directory-alist
- ;; `(("." . ,(concat spacemacs-cache-directory "undo"))))
- ;; (unless (file-exists-p (concat spacemacs-cache-directory "undo"))
- ;; (make-directory (concat spacemacs-cache-directory "undo")))
+ (setq magit-commit-arguments '("--gpg-sign=4E05246AB0BF7FFB"))
+
+ (setq undo-tree-auto-save-history t
+ undo-tree-history-directory-alist
+ `(("." . ,(concat spacemacs-cache-directory "undo"))))
+ (unless (file-exists-p (concat spacemacs-cache-directory "undo"))
+ (make-directory (concat spacemacs-cache-directory "undo")))
;; Use pdflatex instead of latex
- (setq TeX-PDF-mode t)
+ (setq TeX-PDF-mode t
+ TeX-engine 'xetex)
;; Support zathura in TeX mode
(setq TeX-view-program-selection
"%o"))))
;; Swap : and ;
- (define-key evil-motion-state-map ";" 'evil-ex)
- (define-key evil-motion-state-map ":" 'evil-repeat-find-char)
+ ;; (define-key evil-motion-state-map ";" 'evil-ex)
+ ;; (define-key evil-motion-state-map ":" 'evil-repeat-find-char)
;; Set the erc nick completion postfix to ", "
;; (setq erc-pcomplete-nick-postfix ", ")
;; Do not write anything past this comment. This is where Emacs will
;; auto-generate custom variable definitions.
+(defun dotspacemacs/emacs-custom-settings ()
+ "Emacs custom settings.
+This is an auto-generated function, do not modify its content directly, use
+Emacs customize menu instead.
+This function is called at the very end of Spacemacs initialization."
(custom-set-variables
;; custom-set-variables was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; If there is more than one, they won't work right.
'(package-selected-packages
(quote
- (toml-mode rustfmt racer flycheck-rust company-auctex auctex-latexmk auctex xterm-color toc-org shell-pop org-repo-todo org-present org-pomodoro org-plus-contrib org-bullets multi-term mmm-mode markdown-toc markdown-mode htmlize helm-flyspell helm-company helm-c-yasnippet gnuplot gh-md flycheck-pos-tip flycheck eshell-z eshell-prompt-extras esh-help company-statistics company-quickhelp company auto-yasnippet auto-dictionary ac-ispell smeargle orgit magit-gitflow helm-gitignore gitignore-mode gitconfig-mode gitattributes-mode git-timemachine git-messenger evil-magit ws-butler window-numbering which-key volatile-highlights vi-tilde-fringe use-package spacemacs-theme spaceline smooth-scrolling restart-emacs rainbow-delimiters quelpa popwin persp-mode pcre2el paradox page-break-lines open-junk-file neotree move-text macrostep lorem-ipsum linum-relative link-hint leuven-theme info+ indent-guide ido-vertical-mode hungry-delete hl-todo highlight-parentheses highlight-numbers highlight-indentation help-fns+ helm-themes helm-swoop helm-projectile helm-mode-manager helm-make helm-flx helm-descbinds helm-ag google-translate golden-ratio flx-ido fill-column-indicator fancy-battery f expand-region exec-path-from-shell evil-visualstar evil-tutor evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-lisp-state evil-jumper evil-indent-plus evil-iedit-state evil-exchange evil-escape evil-ediff evil-args evil-anzu eval-sexp-fu elisp-slime-nav define-word clean-aindent-mode buffer-move bracketed-paste auto-highlight-symbol auto-compile aggressive-indent adaptive-wrap ace-window ace-link ace-jump-helm-line))))
+ (web-mode web-beautify tagedit slim-mode scss-mode sass-mode pug-mode org-ref key-chord livid-mode skewer-mode simple-httpd less-css-mode json-mode json-snatcher json-reformat js2-refactor multiple-cursors js2-mode js-doc insert-shebang helm-bibtex parsebib haml-mode fish-mode emmet-mode disaster company-web web-completion-data company-tern dash-functional tern company-shell company-c-headers coffee-mode cmake-mode clang-format biblio biblio-core xterm-color ws-butler writeroom-mode window-numbering which-key wgrep volatile-highlights vi-tilde-fringe uuidgen use-package toc-org spacemacs-theme spaceline smex smeargle shell-pop restart-emacs request rainbow-delimiters quelpa popwin persp-mode pcre2el paradox orgit org-projectile org-present org-pomodoro org-plus-contrib org-download org-bullets open-junk-file neotree mwim multi-term move-text mmm-mode markdown-toc magit-gitflow macrostep lorem-ipsum linum-relative link-hint ivy-purpose ivy-hydra intero info+ indent-guide ido-vertical-mode hungry-delete htmlize hlint-refactor hl-todo hindent highlight-parentheses highlight-numbers highlight-indentation hide-comnt help-fns+ helm-make haskell-snippets google-translate golden-ratio gnuplot gitignore-mode gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link gh-md flyspell-correct-ivy flycheck-pos-tip flycheck-haskell flx-ido fill-column-indicator fancy-battery eyebrowse expand-region exec-path-from-shell evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-magit evil-lisp-state evil-indent-plus evil-iedit-state evil-exchange evil-escape evil-ediff evil-args evil-anzu eval-sexp-fu eshell-z eshell-prompt-extras esh-help elisp-slime-nav dumb-jump define-word crux counsel-projectile company-statistics company-ghci company-ghc company-cabal company-auctex column-enforce-mode cmm-mode clean-aindent-mode auto-yasnippet auto-highlight-symbol auto-dictionary auto-compile auctex-latexmk aggressive-indent adaptive-wrap ace-window ace-link ac-ispell))))
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
- '(company-tooltip-common ((t (:inherit company-tooltip :weight bold :underline nil))))
- '(company-tooltip-common-selection ((t (:inherit company-tooltip-selection :weight bold :underline nil)))))
+ )
+)
projects / ~bandali / configs / commitdiff