[emacs] update 7 drones
[~bandali/configs] / rc.org
CommitLineData
08146d0e
AB
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
b13e2dc1
AB
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
17** [[https://github.com/afewmail/afew][afew]]
18:PROPERTIES:
19:header-args+: :tangle ~/.config/afew/config
20:END:
21
22#+begin_quote
23an initial tagging script for notmuch mail
24#+end_quote
25
26#+begin_src conf
27# This is the default filter chain
28[SpamFilter]
29#[ClassifyingFilter]
30[KillThreadsFilter]
31#[ListMailsFilter]
32[ArchiveSentMailsFilter]
33sent_tag = sent
34[InboxFilter]
35
36#[Filter.1]
37#query = 'folder:amin/lists/.haskell-cafe'
38#tags = +lists;+lists/haskell-cafe
39#message = lists/haskell-cafe
40
41#[Filter.2]
42#query = 'folder:amin/lists/.haskell-weekly'
43#tags = +lists;+lists/haskell-weekly
44#message = lists/haskell-weekly
45
46#[Filter.3]
47#query = 'folder:amin/lists/.hackernewsletter'
48#tags = +lists;+lists/hackernewsletter
49#message = lists/hackernewsletter
50
51
52#[FolderNameFilter]
53#folder_blacklist = Inbox
54#maildir_separator = /.
55#folder_transforms = Drafts:draft Junk:spam Trash:deleted Sent:sent Archive:archive lists/haskell-cafe:lists/haskell-cafe
56#+end_src
57
58** bspwm
59
60*** bspwmrc
61:PROPERTIES:
62:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
63:END:
64
65#+begin_src sh
66sxhkd &
67sh ~/.fehbg &
68xfce4-panel -d &
87af8efd 69compton &
b13e2dc1
AB
70sleep 0.5 && pasystray --notify=all &
71
72bspc monitor -d I II III IV V VI VII VIII IX X
73#bspc monitor eDP-1 -d I II III IV V
74#bspc monitor HDMI-1 -d VI VII VIII IX X
75
76#bspc config border_width 2
77#bspc config window_gap 8
78bspc config window_gap 0
79
80bspc config bottom_padding 26
81
82bspc config split_ratio 0.52
83bspc config borderless_monocle true
84bspc config gapless_monocle true
85bspc config click_to_focus button1
86bspc config directional_focus_tightness low
87
87af8efd 88#bspc rule -a Firefox desktop='^1' follow=on
b13e2dc1
AB
89bspc rule -a Nightly desktop='^1' follow=on
90bspc rule -a Emacs desktop='^2' state=tiled follow=on
91#bspc rule -a Chromium desktop='^4' follow=on
92bspc rule -a URxvt state=floating
93bspc rule -a URxvt:tiled state=tiled
94bspc rule -a Connman-gtk state=floating
95bspc rule -a Xfce4-panel state=floating
96bspc rule -a TelegramDesktop state=floating
97bspc rule -a Ec state=floating
98bspc rule -a Pavucontrol state=floating
99bspc rule -a Eog state=floating
100bspc rule -a Seahorse state=floating
101bspc rule -a mpv state=floating
102bspc rule -a Evince state=floating
103bspc rule -a Meld state=floating
104bspc rule -a Autokey-gtk state=floating
105bspc rule -a Mousepad state=floating
106bspc rule -a Wrapper-1.0 state=floating
107bspc rule -a File-roller state=floating
108bspc rule -a Gnome-disks state=floating
109bspc rule -a Termite state=floating
110bspc rule -a Termite:tiled state=tiled
111bspc rule -a Thunderbird:Calendar state=floating
112bspc rule -a Audacity state=floating
113bspc rule -a Proof state=floating # pvs x-show-proof
114bspc rule -a Nm-connection-editor state=floating
115bspc rule -a Wire state=floating
116bspc rule -a discord state=floating
117bspc rule -a X2goclient state=floating
118bspc rule -a SimpleScreenRecorder state=floating
119bspc rule -a Gimp state=floating
120bspc rule -a Wrapper-2.0 state=floating
121bspc rule -a Zathura state=tiled
122#+end_src
123
124*** sxhkdrc
125:PROPERTIES:
126:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
127:END:
128
129#+begin_src conf
130#
131# wm independent hotkeys
132#
133
134# terminal emulator
135super + {_,shift} + Return
136 urxvt{_, -name tiled}
137
138#super + {_,shift} + Return
139# termite{_, --name=tiled}
140
141# program launcher
142super + space
143 rofi -show run -display-run '> ' -display-window ' 🗔 '
144
145super + alt + space
146 xfce4-popup-whiskermenu
147
148# window finder
149super + backslash
150 rofi -show window -display-run '> ' -display-window ' 🗔 '
151
152# password manager
153alt + space
154 rofi-pass
155
156# firefox
157#super + r
158# firefox
159
160# chromium
161#super + c
162# chromium -incognito
163
164# emacs
165super + e
166 emacs
167
168# make sxhkd reload its configuration files:
169super + Escape
170 pkill -USR1 -x sxhkd
171
172# volume {up,down}
173XF86Audio{Raise,Lower}Volume
174 pamixer --allow-boost --{in,de}crease 5
175
176# mute
177XF86AudioMute
178 pamixer --toggle-mute
179
373a060a
AB
180XF86AudioMicMute
181 pactl set-source-mute 1 toggle
182
b13e2dc1
AB
183# playback control
184XF86Audio{Play,Prev,Next}
185 mpc {toggle,prev,next}
186
187# lock the screen
188super + shift + q
189 light-locker-command -l
190
191# Toggle keyboard layout
192super + F7
193 toggle-layout
194
195# Toggle Xfce presentation mode
196XF86LaunchB
197 toggle-presentation-mode
198
199# monitor brightness
200XF86MonBrightness{Up,Down}
201 light -{A,U} 5
202
203super + apostrophe
204 rofi-light
205
206# keyboard brightness
207#XF86KbdBrightness{Up,Down}
208# kbdlight {up,down}
209
72f329ba
AB
210XF86RotateWindows
211 toggle-tablet
212
b13e2dc1
AB
213#
214# bspwm hotkeys
215#
216
217# quit bspwm normally
218super + alt + Escape
219 bspc quit
220
221# close and kill
222super + {w,q}
223 bspc node -{c,k}
224
225# alternate between the tiled and monocle layout
226super + m
227 bspc desktop -l next
228
229# send the newest marked node to the newest preselected node
230super + y
231 bspc node newest.marked.local -n newest.!automatic.local
232
233# swap the current node and the biggest node
234super + g
235 bspc node -s biggest
236
237#
238# state/flags
239#
240
241# set the window state
242super + {t,shift + t,s,f}
243 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
244
245# set the node flags
246super + ctrl + {m,x,y,z}
247 bspc node -g {marked,locked,sticky,private}
248
249#
250# focus/swap
251#
252
253# focus the node in the given direction
254super + {_,shift + }{h,j,k,l}
255 bspc node -{f,s} {west,south,north,east}
256
257# focus the node for the given path jump
258super + {p,b,comma,period}
259 bspc node -f @{parent,brother,first,second}
260
261# focus the next/previous node in the current desktop
262super + {_,shift + }c
263 bspc node -f {next,prev}.local
264
265# focus the next/previous desktop in the current monitor
266super + bracket{left,right}
267 bspc desktop -f {prev,next}.local
268
269# send to next/prev desktop
270super + shift + bracket{left,right}
271 bspc node -d {prev,next} --follow
272
273# focus the last node/desktop
274super + {grave,Tab}
275 bspc {node,desktop} -f last
276
277# focus the older or newer node in the focus history
278super + {o,i}
279 bspc wm -h off; \
280 bspc node {older,newer} -f; \
281 bspc wm -h on
282
283# focus or send to the given desktop
284super + {_,shift + }{1-9,0}
285 bspc {desktop -f,node -d} '^{1-9,10}'
286
287#
288# preselect
289#
290
291# preselect the direction
292super + ctrl + {h,j,k,l}
293 bspc node -p {west,south,north,east}
294
295# preselect the ratio
296super + ctrl + {1-9}
297 bspc node -o 0.{1-9}
298
299# cancel the preselection for the focused node
300super + ctrl + space
301 bspc node -p cancel
302
303# cancel the preselection for the focused desktop
304super + ctrl + shift + space
305 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
306
307#
308# move/resize
309#
310
311# expand a window by moving one of its side outward
312super + alt + {h,j,k,l}
313 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
314
315# contract a window by moving one of its side inward
316super + alt + shift + {h,j,k,l}
317 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
318
319# move a floating window
320super + {Left,Down,Up,Right}
321 bspc node -v {-20 0,0 20,0 -20,20 0}
322
323#alt + bracket{left,right}
324# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
325#+end_src
326
327** compton
328:PROPERTIES:
329:header-args+: :tangle ~/.config/compton.conf
330:END:
331
332#+begin_src conf
333# Shadow
334shadow = false; # Enabled client-side shadows on windows.
335no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
336no-dnd-shadow = true; # Don't draw shadows on DND windows.
337clear-shadow = true; # Zero the part of the shadow's mask behind the
338 # window. Fix some weirdness with ARGB windows.
339shadow-radius = 5; # The blur radius for shadows. (default 12)
340shadow-offset-x = -5; # The left offset for shadows. (default -15)
341shadow-offset-y = -5; # The top offset for shadows. (default -15)
342# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
343# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
344# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
345# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
346shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
347# shadow-exclude = "n:e:Notification";
348#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
349shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
350 # (see also: --detect-rounded-corners)
351
352# Opacity
353menu-opacity = 1.0; # The opacity for menus. (default 1.0)
354#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
355# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
356frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
357# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
358 # value of _NET_WM_OPACITY. Bad choice.
359alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
360 # it may result in less X resource usage,
361 # Yet fading may look bad.
362#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
363#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
364# blur-background = true; # Blur background of transparent windows.
365 # Bad performance with X Render backend.
366 # GLX backend is preferred.
367# blur-background-frame = true; # Blur background of opaque windows with transparent
368 # frames as well.
369blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
370blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
371 # Exclude conditions for background blur.
372
373# Fading
374fading = false; # Fade windows during opacity changes.
375fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
376fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
377fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
378# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
379fade-exclude = [ ]; # Exclude conditions for fading.
380
381# Other
382backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
383 # much faster but depends on a sane driver.
384mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
385mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
386use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
387 # instead of using FocusIn/Out events. Usually more reliable but
388 # depends on a EWMH-compliant WM.
389detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
390detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
391 # managers not passing _NET_WM_OPACITY of client windows to frame
392 # windows.
393refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
394vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
395 # See man page for more details.
396dbe = false; # Enable DBE painting mode. Rarely needed.
397paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
398sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
399 # Incompatible with certain VSync methods.
400unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
401 # detected, to maximize performance for full-screen windows.
402focus-exclude = [ ]; # A list of conditions of windows that should always be considered
403 # focused.
404detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
405 # the same group focused at the same time.
406detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
407invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
408
409# GLX backend # GLX backend fine-tune options. See man page for more info.
410glx-no-stencil = true; # Recommended.
411glx-copy-from-front = false; # Useful with --glx-swap-method,
412# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
413# glx-no-rebind-pixmap = true; # Recommended if it works.
414glx-no-rebind-pixmap = true; # Recommended if it works.
415#glx-swap-method = "4"; # See man page.
416glx-swap-method = "4"; # See man page.
417
418# Window type settings
419wintypes:
420{
421 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
422 menu = { shadow = false; };
423 dropdown_menu = { shadow = false; };
424 popup_menu = { shadow = false; };
425 utility = { shadow = false; };
426 # fade: Fade the particular type of windows.
427 # shadow: Give those windows shadow
428 # opacity: Default opacity for the type of windows.
429 # focus: Whether to always consider windows of this type focused.
430};
431#+end_src
432
05ab13aa
AB
433** Dunst
434:PROPERTIES:
435:header-args+: :tangle ~/.config/dunst/dunstrc
436:END:
437
438#+begin_src conf
439[global]
440#font = Ubuntu Mono 10.5
441font = Inconsolata 11
442
443# Path to default icons.
444icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
445
446icon_position = left
447# <b>bold</b>
448# <i>italic</i>
449# <s>strikethrough<s/>
450# <u>underline</u>
451markup = full
452# The format of the message. Possible variables are:
453# %a appname
454# %s summary
455# %b body
456# %i iconname (including its path)
457# %I iconname (without its path)
458# %p progress value if set ([ 0%] to [100%]) or nothing
459# Markup is allowed
460format = "<b>%s</b>\n%b"
461# Sort messages by urgency
462sort = yes
463# Show how many messages are currently hidden (because of geometry)
464indicate_hiddenl= no
465# Alignment of message text.
466# Possible values are "left", "center" and "right"
467alignment = center
468# The frequency with wich text that is longer than the notification
469# window allows bounces back and forth.
470# This option conflicts with 'word_wrap'.
471# Set to 0 to disable
472bounce_freq = 3
473# show age of message if message is older than show_age_threshold seconds.
474# set to -1 to disable
475show_age_threshold = -1
476# split notifications into multiple lines if they don't fit into geometry
477word_wrap = yes
478# ignore newlines '\n' in notifications
479ignore_newline = no
480# The geometry of the message window.
481# geometry [{width}]x{height}][+/-{x}+/-{y}]
482# The height is measured in number of notifications everything else in pixels. If the width
483# is omitted but the height is given ("-geometry x2"), the message window
484# expands over the whole screen (dmenu-like). If width is 0,
485# the window expands to the longest message displayed.
486# A positive x is measured from the left, a negative from the
487# right side of the screen. Y is measured from the top and down respectevly.
488# The width can be negative. In this case the actual width is the
489# screen width minus the width defined in within the geometry option.
490#geometry = "410x12-12+12"
491#geometry = "0x0-30-30"
492geometry = "260x12-30-30"
493# The transparency of the window. range: [0; 100]
494# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
495transparency = 0
496# Don't remove messages, if the user is idle (no mouse or keyboard input)
497# for longer than idle_threshold seconds.
498# Set to 0 to disable.
499idle_threshold = 120
500# Which monitor should the notifications be displayed on.
501monitor = 0
502# Display notification on focused monitor. Possible modes are:
503# mouse: follow mouse pointer
504# keyboard: follow window with keyboard focus
505# none: don't follow anything
506#
507# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
508# This should be the case for almost all modern windowmanagers.
509#
510# If this option is set to mouse or keyboard, the monitor option will be
511# ignored.
512follow = keyboard
513# should a notification popped up from history be sticky or
514# timeout as if it would normally do.
515sticky_history = yes
516# The height of a single line. If the height is smaller than the font height,
517# it will get raised to the font height.
518# This adds empty space above and under the text.
519line_height = 0
520
521show_indicators = yes
522
523# Draw a line of 'separatpr_height' pixel height between two notifications.
524# Set to 0 to disable
525separator_height = 3
526# padding between text and separator
527padding = 8
528# horizontal padding
529horizontal_padding = 8
530# Define a color for the separator.
531# possible values are:
532# * auto: dunst tries to find a color fitting to the background
533# * foreground: use the same color as the foreground
534# * frame: use the same color as the frame.
535# * anything else will be interpreted as a X color
536separator_color = foreground
537# print a notification on startup
538# This is mainly for error detection, since dbus (re-)starts dunst
539# automatically after a crash.
540startup_notification = false
541# dmenu path
542#dmenu = /usr/bin/dmenu -p dunst:
543dmenu = /usr/bin/rofi -dmenu -p dunst:
544# browser for opening urls in context menu
545browser = /usr/bin/firefox -new-tab
546[frame]
547width = 0
548color = "#377222"
549[shortcuts]
550# shortcuts are specified as [modifier+][modifier+]...key
551# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
552# and 'mod4' (windows-key)
553# xev might be helpful to find names for keys
554# close notification
555close = ctrl+space
556# close all notifications
557close_all = ctrl+shift+space
558# redisplay last message(s)
559# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
560history = ctrl+shift+h
561# context menu
562context = ctrl+shift+period
563[urgency_low]
564# IMPORTANT: colors have to be defined in quotation marks.
565# Otherwise the '#' and following would be interpreted as a comment.
566background = "#1d2a30"
567foreground = "#71c2af"
568timeout = 3
569[urgency_normal]
570background = "#1d2a30"
571foreground = "#71c2af"
572timeout = 0
573[urgency_critical]
574background = "#1d2a30"
575foreground = "#ff9982"
576timeout = 0
577
578# Every section that isn't one of the above is interpreted as a rules
579# to override settings for certain messages.
580# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
581# and you can override the 'timeout', 'urgency', 'foreground', 'background'
582# and 'format'.
583# Shell-like globbing will get expanded.
584#
585# SCRIPTING
586# you can specify a script that gets run when the rule matches by setting
587# the 'script' option.
588# The script will be called as follows:
589# script appname summary body icon urgency
590# where urgency can be "LOW", "NORMAL" or "CRITICAL".
591#
592# NOTE: if you don't want a notification to be displayed, set the format to ""
593# NOTE: It might be helpful to run dunst -print in a terminal in order to find
594# fitting options for rules.
595#[espeak]
596# summary = "*"
597# script = dunst_espeak.sh
598#[script-test]
599# summary = "*script*"
600# script = dunst_test.sh
601#[ignore]
602## This notification will not be displayed
603# summary = "foobar"
604# format = ""
605#[signed_on]
606# appname = Pidgin
607# summary = "*signed on*"
608# urgency = low
609#
610#[signed_off]
611# appname = Pidgin
612# summary = *signed off*
613# urgency = low
614#
615#[says]
616# appname = Pidgin
617# summary = *says*
618# urgency = critical
619#
620#[twitter]
621# appname = Pidgin
622# summary = *twitter.com*
623# urgency = normal
624#
625[xfpm-backlight]
626 summary = *Brightness*
627 urgency = low
628#+end_src
629
630** Fontconfig
631:PROPERTIES:
45d84997 632:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
05ab13aa
AB
633:END:
634
635#+begin_src xml
636<?xml version="1.0"?>
637<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
638<fontconfig>
639 <match target="font">
640 <edit mode="assign" name="rgba">
641 <const>rgb</const>
642 </edit>
643 </match>
644 <match target="font">
645 <edit mode="assign" name="hinting">
646 <bool>true</bool>
647 </edit>
648 </match>
649 <match target="font">
650 <edit mode="assign" name="hintstyle">
651 <const>hintslight</const>
652 </edit>
653 </match>
654 <match target="font">
655 <edit mode="assign" name="antialias">
656 <bool>true</bool>
657 </edit>
658 </match>
659 <match target="font">
660 <edit mode="assign" name="lcdfilter">
661 <const>lcddefault</const>
662 </edit>
663 </match>
664 <dir>~/.fonts</dir>
665
666 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
667 <alias binding="same">
668 <family>Helvetica</family>
669 <accept>
670 <family>Liberation Sans</family>
671 </accept>
672</alias>
673</fontconfig>
674#+end_src
675
58cbbce2 676** Git
08146d0e
AB
677
678*** gitconfig
679:PROPERTIES:
680:header-args+: :tangle ~/.gitconfig
681:END:
682
683**** user
684#+begin_src conf
685[user]
686 name = Amin Bandali
687 email = amin@aminb.org
688 # signingkey = 4E05246AB0BF7FFB
689#+end_src
690
691**** signing
692#+begin_src conf
693# [commit]
694# gpgsign = true
695# [format]
696# signoff = true
697#+end_src
698
699**** core
700#+begin_src conf
701[core]
702 autocrlf = input # CRLF -> LF on commit
703 editor = emacsclient -t
704 excludesfile = ~/.gitignore_global
705 pager = "less"
706#+end_src
707
708**** gpg
709#+begin_src conf
710[gpg]
711 program = gpg2
712#+end_src
713
714**** alias
715#+begin_src conf
716[alias]
717 git = !exec git # handle nested git calls, e.g. git git status
718 aliases = config --get-regexp '^alias\\.'
719 a = add
720 s = status
721 sl = status --long
722 c = checkout
723 cb = checkout -b
724 b = branch
725 r = rebase
726 p = pull
727 pr = pull --rebase
728 ps = push
729 psf = push --force
730#+end_src
731
732**** color
733#+begin_src conf
734[color]
735 ui = auto
736[color "status"]
737 added = green bold
738 changed = red bold
739 untracked = red bold
740[color "branch"]
741 current = green bold
742 remote = magenta bold
743[color "diff"]
744 new = green bold
745 old = red bold
746#+end_src
747
748**** status
749#+begin_src conf
750[status]
751 # showUntrackedFiles = all
752 short=true
753 branch=true
754#+end_src
755
756**** github
757#+begin_src conf
758[github]
759 user = aminb
760#+end_src
761
762*** gitignore
763:PROPERTIES:
764:header-args+: :tangle ~/.gitignore_global
765:END:
766
767#+begin_src conf
768*.orig
769*.py[co]
770*.sublime-workspace
771*~
772.DS_Store
773*.elc
774*-autoloads.el
775#+end_src
58cbbce2
AB
776
777** Latexmk
778:PROPERTIES:
779:header-args+: :tangle ~/.latexmkrc
780:END:
781
782#+begin_src conf
783$pdf_previewer = "start zathura %O %S";
784$clean_ext = "aux out";
785
786# $pdf_update_method = 4;
787# $pdf_update_command = "zathura %O %S";
788
789# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
790# by Ctrl+click in the PDF.
791# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
792# editor.
793# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
794#+end_src
b13e2dc1 795
434b1815
AB
796** libinput
797
798Improve XPS 15 9560's touchpad experience.
799
800#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
801Section "InputClass"
802 Identifier "libinput touchpad catchall"
803 Driver "libinput"
804 MatchIsTouchpad "on"
805 Option "ClickMethod" "clickfinger"
806 Option "NaturalScrolling" "true"
807 Option "Tapping" "on"
808 Option "TappingButtonMap" "lrm"
809EndSection
810#+end_src
811
931a4b06
AB
812** getmail
813
814*** getmailrc
815:PROPERTIES:
816:header-args+: :tangle ~/.getmail/getmailrc
817:END:
818
819#+begin_src conf
820[retriever]
821type = SimplePOP3SSLRetriever
822server = fencepost.gnu.org
823username = aminb
824password_command = ("gpg2", "--no-tty", "-q", "-d", "~/.passwd/gnu.gpg")
825port = 995
826use_apop = True
827
828[destination]
829type = Maildir
830path = ~/mail/gnu/Inbox/
831
832[options]
833delete = True
834#+end_src
835
836*** getmail.service
837:PROPERTIES:
838:header-args+: :tangle ~/.config/systemd/user/getmail.service
839:END:
840
841#+begin_src conf :tangle no
842[Unit]
843Description=getmail service
844
845[Service]
846Type=oneshot
847ExecStart=/usr/bin/getmail
848StandardOutput=syslog
849StandardError=syslog
850#+end_src
851
852*** getmail.timer
853:PROPERTIES:
854:header-args+: :tangle ~/.config/systemd/user/getmail.timer
855:END:
856
857#+begin_src conf :tangle no
858[Unit]
859Description=getmail timer
860
861[Timer]
862OnCalendar=*:0/30
863Persistent=true
864Unit=getmail.service
865
866[Install]
867WantedBy=timers.target
868#+end_src
869
870** GnuPG
871:PROPERTIES:
872:header-args+: :tangle ~/.gnupg/gpg-agent.conf
873:END:
874
875#+begin_src conf
876default-cache-ttl 43200
877max-cache-ttl 43200
878
879default-cache-ttl-ssh 10800
880max-cache-ttl-ssh 10800
881
882# pinentry-program /usr/bin/pinentry-qt
883#+end_src
884
be76c6db
AB
885** GTK
886
887*** gtk-2.0
888:PROPERTIES:
889:header-args+: :tangle ~/.gtkrc-2.0
890:END:
891
892#+begin_src conf
893gtk-theme-name="Greybird"
894gtk-icon-theme-name="Paper"
895gtk-font-name="Ubuntu 10"
896gtk-menu-images=0
897# gtk-key-theme-name = "Emacs"
898#+end_src
899
900*** gtk-3.0
901:PROPERTIES:
902:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
903:END:
904
905#+begin_src conf :tangle no
906[Settings]
907gtk-icon-theme-name = Paper
908# gtk-theme-name = Adwaita
909
910gtk-theme-name = Greybird
911# gtk-theme-name = Arc-Darker
912# gtk-theme-name = Numix-ArchBlue
913
914gtk-font-name = Ubuntu 10
915# gtk-key-theme-name = Emacs
916#+end_src
917
918** isync
919
920*** mbsyncrc
921:PROPERTIES:
922:header-args+: :tangle ~/.mbsyncrc
923:END:
924
925#+begin_src conf
926# Global defaults
927CopyArrivalDate yes
928
929######
930IMAPAccount amin
931Host nix.aminb.org
932User amin@aminb.org
933PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
934SSLType IMAPS
935
936IMAPStore amin-remote
937Account amin
938
939MaildirStore amin-local
940Path ~/mail/amin/
941Inbox ~/mail/amin/Inbox
942SubFolders Verbatim
943
944Channel amin
945Master :amin-remote:
946Slave :amin-local:
947Patterns * !dovecot*
948Create Both
949SyncState *
950
951######
952IMAPAccount uwaterloo
953Host connect.uwaterloo.ca
59027673 954User abandali
be76c6db
AB
955PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
956SSLType IMAPS
957
958IMAPStore uwaterloo-remote
959Account uwaterloo
960
961MaildirStore uwaterloo-local
962Path ~/mail/uwaterloo/
963Inbox ~/mail/uwaterloo/Inbox
964SubFolders Verbatim
965
966Channel uwaterloo
967Master :uwaterloo-remote:
968Slave :uwaterloo-local:
969Patterns * !dovecot*
970Create Both
971SyncState *
972#+end_src
973
974*** mbsync.service
975:PROPERTIES:
976:header-args+: :tangle ~/.config/systemd/user/mbsync.service
977:END:
978
979#+begin_src conf :tangle no
980[Unit]
981Description=mbsync service
982
983[Service]
984Type=oneshot
985ExecStart=/usr/bin/mbsync -Va
986StandardOutput=syslog
987StandardError=syslog
988#+end_src
989
990*** mbsync.timer
991:PROPERTIES:
992:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
993:END:
994
995#+begin_src conf :tangle no
996[Unit]
997Description=mbsync timer
998
999[Timer]
1000OnCalendar=*:0/15
1001Persistent=true
1002Unit=mbsync.service
1003
1004[Install]
1005WantedBy=timers.target
1006#+end_src
1007
59027673
AB
1008** mpd
1009:PROPERTIES:
1010:header-args+: :tangle ~/.config/mpd/mpd.conf
1011:END:
1012
1013#+begin_src conf
1014# An example configuration file for MPD.
1015# Read the user manual for documentation: http://www.musicpd.org/doc/user/
1016
1017
1018# Files and directories #######################################################
1019#
1020# This setting controls the top directory which MPD will search to discover the
1021# available audio files and add them to the daemon's online database. This
1022# setting defaults to the XDG directory, otherwise the music directory will be
1023# be disabled and audio files will only be accepted over ipc socket (using
1024# file:// protocol) or streaming files over an accepted protocol.
1025#
1026music_directory "~/usr/music"
1027#
1028# This setting sets the MPD internal playlist directory. The purpose of this
1029# directory is storage for playlists created by MPD. The server will use
1030# playlist files not created by the server but only if they are in the MPD
1031# format. This setting defaults to playlist saving being disabled.
1032#
1033playlist_directory "~/.mpd/playlists"
1034#
1035# This setting sets the location of the MPD database. This file is used to
1036# load the database at server start up and store the database while the
1037# server is not up. This setting defaults to disabled which will allow
1038# MPD to accept files over ipc socket (using file:// protocol) or streaming
1039# files over an accepted protocol.
1040#
1041db_file "~/.mpd/database"
1042#
1043# These settings are the locations for the daemon log files for the daemon.
1044# These logs are great for troubleshooting, depending on your log_level
1045# settings.
1046#
1047# The special value "syslog" makes MPD use the local syslog daemon. This
1048# setting defaults to logging to syslog, otherwise logging is disabled.
1049#
1050log_file "~/.mpd/log"
1051#
1052# This setting sets the location of the file which stores the process ID
1053# for use of mpd --kill and some init scripts. This setting is disabled by
1054# default and the pid file will not be stored.
1055#
1056pid_file "~/.mpd/pid"
1057#
1058# This setting sets the location of the file which contains information about
1059# most variables to get MPD back into the same general shape it was in before
1060# it was brought down. This setting is disabled by default and the server
1061# state will be reset on server start up.
1062#
1063state_file "~/.mpd/state"
1064#
1065# The location of the sticker database. This is a database which
1066# manages dynamic information attached to songs.
1067#
1068sticker_file "~/.mpd/sticker.sql"
1069#
1070###############################################################################
1071
1072
1073# General music daemon options ################################################
1074#
1075# This setting specifies the user that MPD will run as. MPD should never run as
1076# root and you may use this setting to make MPD change its user ID after
1077# initialization. This setting is disabled by default and MPD is run as the
1078# current user.
1079#
1080#user "nobody"
1081#
1082# This setting specifies the group that MPD will run as. If not specified
1083# primary group of user specified with "user" setting will be used (if set).
1084# This is useful if MPD needs to be a member of group such as "audio" to
1085# have permission to use sound card.
1086#
1087#group "nogroup"
1088#
1089# This setting sets the address for the daemon to listen on. Careful attention
1090# should be paid if this is assigned to anything other then the default, any.
1091# This setting can deny access to control of the daemon. Not effective if
1092# systemd socket activiation is in use.
1093#
1094# For network
1095#bind_to_address "any"
1096#
1097# And for Unix Socket
1098#bind_to_address "~/.mpd/socket"
1099#
1100# This setting is the TCP port that is desired for the daemon to get assigned
1101# to.
1102#
1103#port "6600"
1104#
1105# This setting controls the type of information which is logged. Available
1106# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1107# argument is recommended for troubleshooting, though can quickly stretch
1108# available resources on limited hardware storage.
1109#
1110#log_level "default"
1111#
1112# If you have a problem with your MP3s ending abruptly it is recommended that
1113# you set this argument to "no" to attempt to fix the problem. If this solves
1114# the problem, it is highly recommended to fix the MP3 files with vbrfix
1115# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1116# point gapless MP3 playback can be enabled.
1117#
1118#gapless_mp3_playback "yes"
1119#
1120# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1121# of starting playback after startup.
1122#
1123#restore_paused "no"
1124#
1125# This setting enables MPD to create playlists in a format usable by other
1126# music players.
1127#
1128#save_absolute_paths_in_playlists "no"
1129#
1130# This setting defines a list of tag types that will be extracted during the
1131# audio file discovery process. The complete list of possible values can be
1132# found in the user manual.
1133#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1134#
1135# This setting enables automatic update of MPD's database when files in
1136# music_directory are changed.
1137#
1138#auto_update "yes"
1139#
1140# Limit the depth of the directories being watched, 0 means only watch
1141# the music directory itself. There is no limit by default.
1142#
1143#auto_update_depth "3"
1144#
1145###############################################################################
1146
1147
1148# Symbolic link behavior ######################################################
1149#
1150# If this setting is set to "yes", MPD will discover audio files by following
1151# symbolic links outside of the configured music_directory.
1152#
1153#follow_outside_symlinks "yes"
1154#
1155# If this setting is set to "yes", MPD will discover audio files by following
1156# symbolic links inside of the configured music_directory.
1157#
1158#follow_inside_symlinks "yes"
1159#
1160###############################################################################
1161
1162
1163# Zeroconf / Avahi Service Discovery ##########################################
1164#
1165# If this setting is set to "yes", service information will be published with
1166# Zeroconf / Avahi.
1167#
1168#zeroconf_enabled "yes"
1169#
1170# The argument to this setting will be the Zeroconf / Avahi unique name for
1171# this MPD server on the network.
1172#
1173#zeroconf_name "Music Player"
1174#
1175###############################################################################
1176
1177
1178# Permissions #################################################################
1179#
1180# If this setting is set, MPD will require password authorization. The password
1181# setting can be specified multiple times for different password profiles.
1182#
1183#password "password@read,add,control,admin"
1184#
1185# This setting specifies the permissions a user has who has not yet logged in.
1186#
1187#default_permissions "read,add,control,admin"
1188#
1189###############################################################################
1190
1191
1192# Database #######################################################################
1193#
1194
1195#database {
1196# plugin "proxy"
1197# host "other.mpd.host"
1198# port "6600"
1199#}
1200
1201# Input #######################################################################
1202#
1203
1204input {
1205 plugin "curl"
1206# proxy "proxy.isp.com:8080"
1207# proxy_user "user"
1208# proxy_password "password"
1209}
1210
1211#
1212###############################################################################
1213
1214# Audio Output ################################################################
1215#
1216
1217audio_output {
1218 type "pulse"
1219 name "pulse audio"
1220}
1221
1222audio_output {
1223 type "fifo"
1224 name "my_fifo"
1225 path "/tmp/mpd.fifo"
1226 format "44100:16:2"
1227}
1228
1229# MPD supports various audio output types, as well as playing through multiple
1230# audio outputs at the same time, through multiple audio_output settings
1231# blocks. Setting this block is optional, though the server will only attempt
1232# autodetection for one sound card.
1233#
1234# An example of an ALSA output:
1235#
1236#audio_output {
1237# type "alsa"
1238# name "My ALSA Device"
1239## device "hw:0,0" # optional
1240## mixer_type "hardware" # optional
1241## mixer_device "default" # optional
1242## mixer_control "PCM" # optional
1243## mixer_index "0" # optional
1244#}
1245#
1246# An example of an OSS output:
1247#
1248#audio_output {
1249# type "oss"
1250# name "My OSS Device"
1251## device "/dev/dsp" # optional
1252## mixer_type "hardware" # optional
1253## mixer_device "/dev/mixer" # optional
1254## mixer_control "PCM" # optional
1255#}
1256#
1257# An example of a shout output (for streaming to Icecast):
1258#
1259#audio_output {
1260# type "shout"
1261# encoder "vorbis" # optional
1262# name "My Shout Stream"
1263# host "localhost"
1264# port "8000"
1265# mount "/mpd.ogg"
1266# password "hackme"
1267# quality "5.0"
1268# bitrate "128"
1269# format "44100:16:1"
1270## protocol "icecast2" # optional
1271## user "source" # optional
1272## description "My Stream Description" # optional
1273## url "http://example.com" # optional
1274## genre "jazz" # optional
1275## public "no" # optional
1276## timeout "2" # optional
1277## mixer_type "software" # optional
1278#}
1279#
1280# An example of a recorder output:
1281#
1282#audio_output {
1283# type "recorder"
1284# name "My recorder"
1285# encoder "vorbis" # optional, vorbis or lame
1286# path "/var/lib/mpd/recorder/mpd.ogg"
1287## quality "5.0" # do not define if bitrate is defined
1288# bitrate "128" # do not define if quality is defined
1289# format "44100:16:1"
1290#}
1291#
1292# An example of a httpd output (built-in HTTP streaming server):
1293#
1294#audio_output {
1295# type "httpd"
1296# name "My HTTP Stream"
1297# encoder "vorbis" # optional, vorbis or lame
1298# port "8000"
1299# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1300## quality "5.0" # do not define if bitrate is defined
1301# bitrate "128" # do not define if quality is defined
1302# format "44100:16:1"
1303# max_clients "0" # optional 0=no limit
1304#}
1305#
1306# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1307#
1308#audio_output {
1309# type "pulse"
1310# name "My Pulse Output"
1311## server "remote_server" # optional
1312## sink "remote_server_sink" # optional
1313#}
1314#
1315# An example of a winmm output (Windows multimedia API).
1316#
1317#audio_output {
1318# type "winmm"
1319# name "My WinMM output"
1320## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1321# or
1322## device "0" # optional
1323## mixer_type "hardware" # optional
1324#}
1325#
1326# An example of an openal output.
1327#
1328#audio_output {
1329# type "openal"
1330# name "My OpenAL output"
1331## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1332#}
1333#
1334# An example of an sndio output.
1335#
1336#audio_output {
1337# type "sndio"
1338# name "sndio output"
1339# mixer_type "software"
1340#}
1341#
1342# An example of an OS X output:
1343#
1344#audio_output {
1345# type "osx"
1346# name "My OS X Device"
1347## device "Built-in Output" # optional
1348## channel_map "-1,-1,0,1" # optional
1349#}
1350#
1351## Example "pipe" output:
1352#
1353#audio_output {
1354# type "pipe"
1355# name "my pipe"
1356# command "aplay -f cd 2>/dev/null"
1357## Or if you're want to use AudioCompress
1358# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1359## Or to send raw PCM stream through PCM:
1360# command "nc example.org 8765"
1361# format "44100:16:2"
1362#}
1363#
1364## An example of a null output (for no audio output):
1365#
1366#audio_output {
1367# type "null"
1368# name "My Null Output"
1369# mixer_type "none" # optional
1370#}
1371#
1372###############################################################################
1373
1374
1375# Normalization automatic volume adjustments ##################################
1376#
1377# This setting specifies the type of ReplayGain to use. This setting can have
1378# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1379# chooses between "track" and "album" depending on the current state of
1380# random playback. If random playback is enabled then "track" mode is used.
1381# See <http://www.replaygain.org> for more details about ReplayGain.
1382# This setting is off by default.
1383#
1384#replaygain "album"
1385#
1386# This setting sets the pre-amp used for files that have ReplayGain tags. By
1387# default this setting is disabled.
1388#
1389#replaygain_preamp "0"
1390#
1391# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1392# By default this setting is disabled.
1393#
1394#replaygain_missing_preamp "0"
1395#
1396# This setting enables or disables ReplayGain limiting.
1397# MPD calculates actual amplification based on the ReplayGain tags
1398# and replaygain_preamp / replaygain_missing_preamp setting.
1399# If replaygain_limit is enabled MPD will never amplify audio signal
1400# above its original level. If replaygain_limit is disabled such amplification
1401# might occur. By default this setting is enabled.
1402#
1403#replaygain_limit "yes"
1404#
1405# This setting enables on-the-fly normalization volume adjustment. This will
1406# result in the volume of all playing audio to be adjusted so the output has
1407# equal "loudness". This setting is disabled by default.
1408#
1409#volume_normalization "no"
1410#
1411###############################################################################
1412
1413# Character Encoding ##########################################################
1414#
1415# If file or directory names do not display correctly for your locale then you
1416# may need to modify this setting.
1417#
1418#filesystem_charset "UTF-8"
1419#
1420###############################################################################
1421#+end_src
1422
1423** msmtp
1424:PROPERTIES:
1425:header-args+: :tangle ~/.msmtprc
1426:END:
1427
1428#+begin_src conf
1429# Set default values for all following accounts.
1430defaults
1431port 587
1432tls on
1433auth on
1434#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1435logfile ~/.msmtp.log
1436
1437# aminb
1438account aminb
1439host nix.aminb.org
2a1be6b4 1440tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
59027673
AB
1441tls_starttls on
1442from amin@aminb.org
1443user amin@aminb.org
1444passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1445
1446# gnu
1447account gnu
1448host fencepost.gnu.org
1449tls_fingerprint 94:0E:37:EB:EA:44:5A:4B:B6:6F:16:3D:6C:7E:7E:44:2D:93:61:C1:FE:82:A8:29:5E:3C:12:4E:2D:BE:0E:2C
1450tls_starttls on
1451from aminb@gnu.org
1452user aminb
1453passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1454
1455# uwaterloo
1456account uwaterloo
1457host connect.uwaterloo.ca
1458tls_starttls on
1459from abandali@uwaterloo.ca
1460user abandali
1461passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1462tls_trust_file /etc/ssl/certs/ca-certificates.crt
1463
1464# uwaterloo (friendly address)
1465account uwaterloo-friendly : uwaterloo
1466from amin.bandali@uwaterloo.ca
1467
1468# Set a default account
1469account default : aminb
1470#+end_src
1471
1472** ncmpcpp
1473
1474*** config
1475:PROPERTIES:
1476:header-args+: :tangle ~/.ncmpcpp/config
1477:END:
1478
1479#+begin_src conf :tangle no
1480##############################################################
1481## This is the example configuration file. Copy it to ##
1482## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1483## and set up your preferences. ##
1484##############################################################
1485#
1486##### directories ######
1487##
1488## Directory for storing ncmpcpp related files.
1489## Changing it is useful if you want to store
1490## everything somewhere else and provide command
1491## line setting for alternative location to config
1492## file which defines that while launching ncmpcpp.
1493##
1494#
1495ncmpcpp_directory = ~/.ncmpcpp
1496#
1497##
1498## Directory for storing downloaded lyrics. It
1499## defaults to ~/.lyrics since other MPD clients
1500## (eg. ncmpc) also use that location.
1501##
1502#
1503#lyrics_directory = ~/.lyrics
1504#
1505##### connection settings #####
1506#
1507#mpd_host = localhost
1508#
1509#mpd_port = 6600
1510#
1511#mpd_connection_timeout = 5
1512#
1513## Needed for tag editor and file operations to work.
1514##
1515mpd_music_dir = ~/usr/music
1516#
1517#mpd_crossfade_time = 5
1518#
1519##### music visualizer #####
1520##
1521## Note: In order to make music visualizer work you'll
1522## need to use mpd fifo output, whose format parameter
1523## has to be set to 44100:16:1 for mono visualization
1524## or 44100:16:2 for stereo visualization. Example
1525## configuration (it has to be put into mpd.conf):
1526##
1527## audio_output {
1528## type "fifo"
1529## name "Visualizer feed"
1530## path "/tmp/mpd.fifo"
1531## format "44100:16:2"
1532## }
1533##
1534#
1535visualizer_fifo_path = /tmp/mpd.fifo
1536#
1537##
1538## Note: Below parameter is needed for ncmpcpp
1539## to determine which output provides data for
1540## visualizer and thus allow syncing between
1541## visualization and sound as currently there
1542## are some problems with it.
1543##
1544#
1545visualizer_output_name = my fifo
1546#
1547##
1548## If you set format to 44100:16:2, make it 'yes'.
1549##
1550visualizer_in_stereo = yes
1551#
1552##
1553## Multiply received samples by given value. Very
1554## useful for proper visualization of quiet music.
1555##
1556#visualizer_sample_multiplier = 1
1557#
1558##
1559## Note: Below parameter defines how often ncmpcpp
1560## has to "synchronize" visualizer and audio outputs.
1561## 30 seconds is optimal value, but if you experience
1562## synchronization problems, set it to lower value.
1563## Keep in mind that sane values start with >=10.
1564##
1565#
1566visualizer_sync_interval = 30
1567#
1568##
1569## Note: To enable spectrum frequency visualization
1570## you need to compile ncmpcpp with fftw3 support.
1571##
1572#
1573## Available values: spectrum, wave, wave_filled, ellipse.
1574##
1575visualizer_type = spectrum
1576#
1577#visualizer_look = ●▮
1578visualizer_look = "●•"
1579#
1580#visualizer_color = blue, cyan, green, yellow, magenta, red
1581#
1582## Alternative subset of 256 colors for terminals that support it.
1583##
1584#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1585#
1586##### system encoding #####
1587##
1588## ncmpcpp should detect your charset encoding
1589## but if it failed to do so, you can specify
1590## charset encoding you are using here.
1591##
1592## Note: You can see whether your ncmpcpp build
1593## supports charset detection by checking output
1594## of `ncmpcpp --version`.
1595##
1596## Note: Since MPD uses UTF-8 by default, setting
1597## this option makes sense only if your encoding
1598## is different.
1599##
1600#
1601#system_encoding = ""
1602#
1603##### delays #####
1604#
1605## Time of inactivity (in seconds) after playlist
1606## highlighting will be disabled (0 = always on).
1607##
1608#playlist_disable_highlight_delay = 5
1609#
1610## Defines how long messages are supposed to be visible.
1611##
1612#message_delay_time = 5
1613#
1614##### song format #####
1615##
1616## For a song format you can use:
1617##
1618## %l - length
1619## %f - filename
1620## %D - directory
1621## %a - artist
1622## %A - album artist
1623## %t - title
1624## %b - album
1625## %y - date
1626## %n - track number (01/12 -> 01)
1627## %N - full track info (01/12 -> 01/12)
1628## %g - genre
1629## %c - composer
1630## %p - performer
1631## %d - disc
1632## %C - comment
1633## %P - priority
1634## $R - begin right alignment
1635##
1636## If you want to make sure that a part of the format is displayed
1637## only when certain tags are present, you can archieve it by
1638## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1639## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1640## It is also possible to define a list of alternatives by providing
1641## several groups and separating them with '|', e.g. '{%t}|{%f}'
1642## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1643## present.
1644##
1645## Note: If you want to set limit on maximal length of a tag, just
1646## put the appropriate number between % and character that defines
1647## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1648##
1649## In addition, formats support markers used for text attributes.
1650## They are followed by character '$'. After that you can put:
1651##
1652## - 0 - default window color (discards all other colors)
1653## - 1 - black
1654## - 2 - red
1655## - 3 - green
1656## - 4 - yellow
1657## - 5 - blue
1658## - 6 - magenta
1659## - 7 - cyan
1660## - 8 - white
1661## - 9 - end of current color
1662## - b - bold text
1663## - u - underline text
1664## - r - reverse colors
1665## - a - use alternative character set
1666##
1667## If you don't want to use a non-color attribute anymore, just put it
1668## again, but this time insert character '/' between '$' and attribute
1669## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1670## or filename with reversed colors.
1671##
1672## If you want to use 256 colors and/or background colors in formats
1673## (the naming scheme is described below in section about color
1674## definitions), it can be done with the syntax $(COLOR), e.g. to set
1675## the artist tag to one of the non-standard colors and make it have
1676## yellow background, you need to write $(197_yellow)%a$(end). Note
1677## that for standard colors this is interchangable with attributes
1678## listed above.
1679##
1680## Note: colors can be nested.
1681##
1682#
1683#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1684#
1685#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1686#
1687#song_library_format = {%n - }{%t}|{%f}
1688#
1689#
1690#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1691#
1692#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1693#
1694#now_playing_prefix = $b
1695#
1696#now_playing_suffix = $/b
1697#
1698#browser_playlist_prefix = "$2playlist$9 "
1699#
1700#selected_item_prefix = $6
1701#
1702#selected_item_suffix = $9
1703#
1704#modified_item_prefix = $3> $9
1705#
1706##
1707## Note: attributes are not supported for the following variables.
1708##
1709#song_window_title_format = {%a - }{%t}|{%f}
1710##
1711## Note: Below variables are used for sorting songs in browser.
1712## The sort mode determines how songs are sorted, and can be used
1713## in combination with a sort format to specify a custom sorting format.
1714## Available values for browser_sort_mode are "name", "mtime", "format"
1715## and "noop".
1716##
1717#
1718#browser_sort_mode = name
1719#
1720#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1721#
1722##### columns settings #####
1723##
1724## syntax of song columns list format is "column column etc."
1725##
1726## - syntax for each column is:
1727##
1728## (width of the column)[color of the column]{displayed tag}
1729##
1730## Note: Width is by default in %, if you want a column to
1731## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1732## will be the column that take 10% of screen (so the real width
1733## will depend on actual screen size), whereas (10f)[white]{a}
1734## will take 10 terminal cells, no matter how wide the screen is.
1735##
1736## - color is optional (if you want the default one,
1737## leave the field empty).
1738##
1739## Note: You can give a column additional attributes by putting appropriate
1740## character after displayed tag character. Available attributes are:
1741##
1742## - r - column will be right aligned
1743## - E - if tag is empty, empty tag marker won't be displayed
1744##
1745## You can also:
1746##
1747## - give a column custom name by putting it after attributes,
1748## separated with character ':', e.g. {lr:Length} gives you
1749## right aligned column of lengths named "Length".
1750##
1751## - define sequence of tags, that have to be displayed in case
1752## predecessor is empty in a way similar to the one in classic
1753## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1754## creates column named "Owner" that tries to display artist
1755## tag and then composer and performer if previous ones are
1756## not available.
1757##
1758#
1759#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1760#
1761##### various settings #####
1762#
1763##
1764## Note: Custom command that will be executed each
1765## time song changes. Useful for notifications etc.
1766##
1767#execute_on_song_change = ""
1768#
1769#playlist_show_mpd_host = no
1770#
1771#playlist_show_remaining_time = no
1772#
1773#playlist_shorten_total_times = no
1774#
1775#playlist_separate_albums = no
1776#
1777##
1778## Note: Possible display modes: classic, columns.
1779##
1780#playlist_display_mode = columns
1781#
1782#browser_display_mode = classic
1783#
1784#search_engine_display_mode = classic
1785#
1786#playlist_editor_display_mode = classic
1787#
1788#discard_colors_if_item_is_selected = yes
1789#
1790#incremental_seeking = yes
1791#
1792#seek_time = 1
1793#
1794#volume_change_step = 2
1795#
1796#autocenter_mode = no
1797#
1798#centered_cursor = no
1799#
1800##
1801## Note: You can specify third character which will
1802## be used to build 'empty' part of progressbar.
1803##
1804#progressbar_look = =>
1805progressbar_look = "─╼╶"
1806#progressbar_look = "─⊙╶"
1807#
1808#progressbar_boldness = yes
1809#
1810## Available values: database, playlist.
1811##
1812#default_place_to_search_in = database
1813#
1814## Available values: classic, alternative.
1815##
1816#user_interface = classic
1817#
1818#data_fetching_delay = yes
1819#
1820## Available values: artist, album_artist, date, genre, composer, performer.
1821##
1822#media_library_primary_tag = artist
1823#
1824## Available values: wrapped, normal.
1825##
1826#default_find_mode = wrapped
1827#
1828#default_tag_editor_pattern = %n - %t
1829#
1830#header_visibility = yes
1831#
1832#statusbar_visibility = yes
1833#
1834#titles_visibility = yes
1835#
1836#header_text_scrolling = yes
1837#
1838#cyclic_scrolling = no
1839#
1840#lines_scrolled = 2
1841#
1842#follow_now_playing_lyrics = no
1843#
1844#fetch_lyrics_for_current_song_in_background = no
1845#
1846#store_lyrics_in_song_dir = no
1847#
1848#generate_win32_compatible_filenames = yes
1849#
1850#allow_for_physical_item_deletion = no
1851#
1852##
1853## Note: If you set this variable, ncmpcpp will try to
1854## get info from last.fm in language you set and if it
1855## fails, it will fall back to english. Otherwise it will
1856## use english the first time.
1857##
1858## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1859##
1860#lastfm_preferred_language = en
1861#
1862#show_hidden_files_in_local_browser = no
1863#
1864##
1865## How shall screen switcher work?
1866##
1867## - "previous" - switch between the current and previous screen.
1868## - "screen1,...,screenN" - switch between given sequence of screens.
1869##
1870## Screens available for use: help, playlist, browser, search_engine,
1871## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1872##
1873#screen_switcher_mode = playlist, browser
1874#
1875##
1876## Note: You can define startup screen
1877## by choosing screen from the list above.
1878##
1879#startup_screen = playlist
1880#
1881##
1882## Note: You can define startup slave screen
1883## by choosing screen from the list above or
1884## an empty value for no slave screen.
1885##
1886#startup_slave_screen = ""
1887#
1888#startup_slave_screen_focus = no
1889#
1890##
1891## Default width of locked screen (in %).
1892## Acceptable values are from 20 to 80.
1893##
1894#
1895#locked_screen_width_part = 50
1896#
1897#ask_for_locked_screen_width_part = yes
1898#
1899#jump_to_now_playing_song_at_start = yes
1900#
1901#ask_before_clearing_playlists = yes
1902#
1903#clock_display_seconds = no
1904#
1905#display_volume_level = yes
1906#
1907#display_bitrate = no
1908#
1909#display_remaining_time = no
1910#
1911## Available values: none, basic, extended, perl.
1912##
1913#regular_expressions = perl
1914#
1915##
1916## Note: If below is enabled, ncmpcpp will ignore leading
1917## "The" word while sorting items in browser, tags in
1918## media library, etc.
1919##
1920#ignore_leading_the = no
1921#
1922#block_search_constraints_change_if_items_found = yes
1923#
1924#mouse_support = yes
1925#
1926#mouse_list_scroll_whole_page = yes
1927#
1928#empty_tag_marker = <empty>
1929#
1930#tags_separator = " | "
1931#
1932#tag_editor_extended_numeration = no
1933#
1934#media_library_sort_by_mtime = no
1935#
1936#enable_window_title = yes
1937#
1938##
1939## Note: You can choose default search mode for search
1940## engine. Available modes are:
1941##
1942## - 1 - use mpd built-in searching (no regexes, pattern matching)
1943## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1944## but if your mpd is on a remote machine, downloading big database
1945## to process it can take a while
1946## - 3 - match only exact values (this mode uses mpd function for searching
1947## in database and local one for searching in current playlist)
1948##
1949#
1950#search_engine_default_search_mode = 1
1951#
1952#external_editor = nano
1953#
1954## Note: set to yes if external editor is a console application.
1955##
1956#use_console_editor = yes
1957#
1958##### colors definitions #####
1959##
1960## It is possible to set a background color by setting a color
1961## value "<foreground>_<background>", e.g. red_black will set
1962## foregound color to red and background color to black.
1963##
1964## In addition, for terminals that support 256 colors it
1965## is possible to set one of them by using a number in range
1966## [1, 256] instead of color name, e.g. numerical value
1967## corresponding to red_black is 2_1. To find out if the
1968## terminal supports 256 colors, run ncmpcpp and check out
1969## the bottom of the help screen for list of available colors
1970## and their numerical values.
1971##
1972## Note: due to technical limitations of ncurses, if 256 colors
1973## are used, it is possible to either use only the colors with
1974## default background color, or all pairs from 1_1 up to 254_127,
1975## depending on the ncurses version used.
1976##
1977#
1978#colors_enabled = yes
1979#
1980#empty_tag_color = cyan
1981#
1982#header_window_color = default
1983#
1984#volume_color = default
1985#
1986#state_line_color = default
1987#
1988#state_flags_color = default
1989#
1990#main_window_color = yellow
1991#
1992#color1 = white
1993#
1994#color2 = green
1995#
1996#main_window_highlight_color = yellow
1997#
1998#progressbar_color = black
1999#
2000#progressbar_elapsed_color = green
2001#
2002#statusbar_color = default
2003#
2004#alternative_ui_separator_color = black
2005#
2006#active_column_color = red
2007#
2008#window_border_color = green
2009#
2010#active_window_border = red
2011#
2012#+end_src
2013
2014*** bindings
2015:PROPERTIES:
2016:header-args+: :tangle ~/.ncmpcpp/bindings
2017:END:
2018
2019#+begin_src conf :tangle no
2020def_key "j"
2021 scroll_down
2022def_key "k"
2023 scroll_up
2024
2025def_key "ctrl-u"
2026 page_up
2027def_key "ctrl-d"
2028 page_down
2029
2030def_key "h"
2031 previous_column
2032def_key "l"
2033 next_column
2034
2035def_key "."
2036 show_lyrics
2037
2038def_key "n"
2039 next_found_item
2040def_key "N"
2041 previous_found_item
2042
2043def_key "J"
2044 move_sort_order_down
2045def_key "K"
2046 move_sort_order_up
2047#+end_src
2048
25869427
AB
2049** notmuch
2050
2051*** notmuch-config
2052:PROPERTIES:
2053:header-args+: :tangle ~/.notmuch-config
2054:END:
2055
2056#+begin_src conf
2057# .notmuch-config - Configuration file for the notmuch mail system
2058#
2059# For more information about notmuch, see https://notmuchmail.org
2060
2061# Database configuration
2062#
2063# The only value supported here is 'path' which should be the top-level
2064# directory where your mail currently exists and to where mail will be
2065# delivered in the future. Files should be individual email messages.
2066# Notmuch will store its database within a sub-directory of the path
2067# configured here named ".notmuch".
2068#
2069[database]
2070path=/home/amin/mail
2071
2072# User configuration
2073#
2074# Here is where you can let notmuch know how you would like to be
2075# addressed. Valid settings are
2076#
2077# name Your full name.
2078# primary_email Your primary email address.
2079# other_email A list (separated by ';') of other email addresses
2080# at which you receive email.
2081#
2082# Notmuch will use the various email addresses configured here when
2083# formatting replies. It will avoid including your own addresses in the
2084# recipient list of replies, and will set the From address based on the
2085# address to which the original email was addressed.
2086#
2087[user]
2088name=Amin Bandali
2089primary_email=amin@aminb.org
2a1be6b4 2090other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
25869427
AB
2091
2092# Configuration for "notmuch new"
2093#
2094# The following options are supported here:
2095#
2096# tags A list (separated by ';') of the tags that will be
2097# added to all messages incorporated by "notmuch new".
2098#
2099# ignore A list (separated by ';') of file and directory names
2100# that will not be searched for messages by "notmuch new".
2101#
2102# NOTE: *Every* file/directory that goes by one of those
2103# names will be ignored, independent of its depth/location
2104# in the mail store.
2105#
2106[new]
2107tags=new;
2108#tags=unread;inbox;
2109ignore=.uidvalidity;.mbsyncstate
2110
2111# Search configuration
2112#
2113# The following option is supported here:
2114#
2115# exclude_tags
2116# A ;-separated list of tags that will be excluded from
2117# search results by default. Using an excluded tag in a
2118# query will override that exclusion.
2119#
2120[search]
2121exclude_tags=deleted;spam;
2122
2123# Maildir compatibility configuration
2124#
2125# The following option is supported here:
2126#
2127# synchronize_flags Valid values are true and false.
2128#
2129# If true, then the following maildir flags (in message filenames)
2130# will be synchronized with the corresponding notmuch tags:
2131#
2132# Flag Tag
2133# ---- -------
2134# D draft
2135# F flagged
2136# P passed
2137# R replied
2138# S unread (added when 'S' flag is not present)
2139#
2140# The "notmuch new" command will notice flag changes in filenames
2141# and update tags, while the "notmuch tag" and "notmuch restore"
2142# commands will notice tag changes and update flags in filenames
2143#
2144[maildir]
2145synchronize_flags=true
2146
2147# Cryptography related configuration
2148#
2149# The following option is supported here:
2150#
2151# gpg_path
2152# binary name or full path to invoke gpg.
2153#
2154[crypto]
2155gpg_path=gpg
2156#+end_src
2157
2158*** post-new hook
2159:PROPERTIES:
2160:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2161:END:
2162
2163#+begin_src sh
2164afew -tn
2165
2166# apply tags to lists
2167notmuch tag +lists +lists/deepspec -- folder:amin/lists/deepspec
2168notmuch tag +lists +lists/haskell-cafe -- folder:amin/lists/haskell-cafe
2169notmuch tag +lists +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2170notmuch tag +lists +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2171notmuch tag +lists +lists/notmuch -- folder:amin/lists/notmuch
2172notmuch tag +lists +lists/info-gnu-emacs -- folder:amin/lists/info-gnu-emacs
2173notmuch tag +lists +lists/help-gnu-emacs -- folder:amin/lists/help-gnu-emacs
2174notmuch tag +lists +lists/emacs-devel -- folder:amin/lists/emacs-devel
2175#+end_src
2176
2177*** notmuch.service
2178:PROPERTIES:
2179:header-args+: :tangle ~/.config/systemd/user/notmuch.service
2180:END:
2181
2182#+begin_src conf :tangle no
2183[Unit]
2184Description=notmuch service
2185
2186[Service]
2187Type=oneshot
2188ExecStart=/usr/bin/notmuch new
2189StandardOutput=syslog
2190StandardError=syslog
2191#+end_src
2192
2193*** notmuch.timer
2194:PROPERTIES:
2195:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2196:END:
2197
2198#+begin_src conf :tangle no
2199[Unit]
2200Description=notmuch timer
2201
2202[Timer]
2203OnCalendar=*:0/5
2204Persistent=true
2205Unit=notmuch.service
2206
2207[Install]
2208WantedBy=timers.target
2209#+end_src
2210
2211** offlineimap
2212
2213*** offlineimaprc
2214:PROPERTIES:
2215:header-args+: :tangle ~/.offlineimaprc
2216:END:
2217
2218#+begin_src conf :tangle no
2219[general]
2220pythonfile = ~/.offlineimap.py
2221accounts = Gmail, aminb
2222maxsyncaccounts = 3
2223
2224[Account Gmail]
2225localrepository = GmailL
2226remoterepository = GmailR
2227
2228[Account aminb]
2229localrepository = aminbL
2230remoterepository = aminbR
2231
2232[Repository GmailL]
2233type = Maildir
2234localfolders = ~/Maildir/Gmail
2235
2236[Repository GmailR]
2237type = IMAP
2238remotehost = imap.gmail.com
2239remoteusereval = mailuser("gmail")
2240remotepasseval = mailpasswd("gmail")
2241sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2242ssl = yes
2243folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2244maxconnections = 1
2245realdelete = no
2246
2247[Repository aminbL]
2248type = Maildir
2249localfolders = ~/Maildir/aminb
2250
2251[Repository aminbR]
2252type = IMAP
2253remotehost = mail.aminb.org
2254remoteusereval = mailuser("aminb")
2255remotepasseval = mailpasswd("aminb")
2256sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2257ssl = yes
2258folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2259maxconnections = 1
2260realdelete = no
2261#+end_src
2262
2263*** offlineimap.py
2264:PROPERTIES:
2265:header-args+: :tangle ~/.offlineimap.py
2266:END:
2267
2268#+begin_src python :tangle no
2269import os
2270import subprocess
2271
2272def mailpasswd(acct):
2273 acct = os.path.basename(acct)
2274 path = "/home/amin/.passwd/%s.gpg" % acct
2275 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2276 try:
2277 return subprocess.check_output(args).strip()
2278 except subprocess.CalledProcessError:
2279 return ""
2280
2281def mailuser(acct):
2282 acct = os.path.basename(acct)
2283 path = "/home/amin/.passwd/%s" % acct
2284 args = ["cat", path]
2285 try:
2286 return subprocess.check_output(args).strip()
2287 except subprocess.CalledProcessError:
2288 return ""
2289
2290def prime_gpg_agent():
2291 ret = False
2292 i = 1
2293 while not ret:
2294 ret = (mailpasswd("prime") == "prime")
2295 if i > 2:
2296 from offlineimap.ui import getglobalui
2297 sys.stderr.write("Error reading in passwords. Terminating.\n")
2298 getglobalui().terminate()
2299 i += 1
2300 return ret
2301
2302prime_gpg_agent()
2303#+end_src
2304
1656853a
AB
2305** polybar
2306
2307*** config
2308:PROPERTIES:
2309:header-args+: :tangle ~/.config/polybar/config
2310:END:
2311
2312#+begin_src conf :tangle no
2313;=====================================================
2314;
2315; To learn more about how to configure Polybar
2316; go to https://github.com/jaagr/polybar
2317;
2318; The README contains alot of information
2319;
2320;=====================================================
2321
2322[colors]
2323;background = ${xrdb:color0:#222}
2324background = #222
2325background-alt = #444
2326;foreground = ${xrdb:color7:#222}
2327foreground = #eee
2328foreground-alt = #888
2329primary = #ffb52a
2330secondary = #e60053
2331alert = #bd2c40
2332
2333[bar/main]
2334;monitor = ${env:MONITOR:HDMI-1}
2335width = 100%
2336height = 27
2337;offset-x = 1%
2338;offset-y = 1%
2339radius = 3.0
2340fixed-center = true
2341
2342background = ${colors.background}
2343foreground = ${colors.foreground}
2344
2345line-size = 3
2346line-color = #f00
2347
2348border-size = 4
2349border-color = #00000000
2350
2351padding-left = 0
2352padding-right = 2
2353
2354module-margin-left = 2
2355module-margin-right = 2
2356
2357font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2358font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2359font-2 = Wuncon Siji:pixelsize=10;1
2360font-3 = FontAwesome:pixelsize=10;1
2361
2362modules-left = bspwm xwindow
2363modules-center =
2364modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2365
2366tray-position = right
2367tray-padding = 1
2368;tray-transparent = true
2369;tray-background = #0063ff
2370tray-maxsize = 18
2371
2372wm-restack = bspwm
2373
2374;override-redirect = true
2375
2376scroll-up = bspwm-desknext
2377scroll-down = bspwm-deskprev
2378
2379[module/xwindow]
2380type = internal/xwindow
2381label = %title:0:50:...%
2382
2383[module/xkeyboard]
2384type = internal/xkeyboard
2385blacklist-0 = num lock
2386
2387format-prefix = " "
2388format-prefix-foreground = ${colors.foreground-alt}
2389format-prefix-underline = ${colors.secondary}
2390
2391label-layout = %layout%
2392label-layout-underline = ${colors.secondary}
2393
2394label-indicator-padding = 2
2395label-indicator-margin = 1
2396label-indicator-background = ${colors.secondary}
2397label-indicator-underline = ${colors.secondary}
2398
2399[module/filesystem]
2400type = internal/fs
2401interval = 25
2402
2403mount-0 = /
2404
2405label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2406label-unmounted = %mountpoint% not mounted
2407label-unmounted-foreground = ${colors.foreground-alt}
2408
2409[module/bspwm]
2410type = internal/bspwm
2411
2412label-focused = %index%
2413label-focused-background = ${colors.background-alt}
2414label-focused-underline= ${colors.primary}
2415label-focused-padding = 2
2416
2417label-occupied = %index%
2418label-occupied-padding = 2
2419
2420label-urgent = %index%!
2421label-urgent-background = ${colors.alert}
2422label-urgent-padding = 2
2423
2424label-empty = %index%
2425label-empty-foreground = ${colors.foreground-alt}
2426label-empty-padding = 2
2427
2428[module/i3]
2429type = internal/i3
2430format = <label-state> <label-mode>
2431index-sort = true
2432wrapping-scroll = false
2433
2434; Only show workspaces on the same output as the bar
2435;pin-workspaces = true
2436
2437label-mode-padding = 2
2438label-mode-foreground = #000
2439label-mode-background = ${colors.primary}
2440
2441; focused = Active workspace on focused monitor
2442label-focused = %index%
2443label-focused-background = ${module/bspwm.label-focused-background}
2444label-focused-underline = ${module/bspwm.label-focused-underline}
2445label-focused-padding = ${module/bspwm.label-focused-padding}
2446
2447; unfocused = Inactive workspace on any monitor
2448label-unfocused = %index%
2449label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2450
2451; visible = Active workspace on unfocused monitor
2452label-visible = %index%
2453label-visible-background = ${self.label-focused-background}
2454label-visible-underline = ${self.label-focused-underline}
2455label-visible-padding = ${self.label-focused-padding}
2456
2457; urgent = Workspace with urgency hint set
2458label-urgent = %index%
2459label-urgent-background = ${module/bspwm.label-urgent-background}
2460label-urgent-padding = ${module/bspwm.label-urgent-padding}
2461
2462[module/mpd]
2463type = internal/mpd
2464format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2465
2466icon-prev = 
2467icon-stop = 
2468icon-play = 
2469icon-pause = 
2470icon-next = 
2471
2472label-song-maxlen = 25
2473label-song-ellipsis = true
2474
2475[module/xbacklight]
2476type = internal/xbacklight
2477
2478format = <label> <bar>
2479label = BL
2480
2481bar-width = 10
2482bar-indicator = |
2483bar-indicator-foreground = #ff
2484bar-indicator-font = 2
2485bar-fill = ─
2486bar-fill-font = 2
2487bar-fill-foreground = #9f78e1
2488bar-empty = ─
2489bar-empty-font = 2
2490bar-empty-foreground = ${colors.foreground-alt}
2491
2492[module/backlight-acpi]
2493inherit = module/xbacklight
2494type = internal/backlight
2495;card = intel_backlight
2496card = mba6x_backlight
2497
2498[module/cpu]
2499type = internal/cpu
2500interval = 2
2501format-prefix = " "
2502format-prefix-foreground = ${colors.foreground-alt}
2503format-underline = #f90000
2504label = %percentage%%
2505
2506[module/memory]
2507type = internal/memory
2508interval = 2
2509format-prefix = " "
2510format-prefix-foreground = ${colors.foreground-alt}
2511format-underline = #4bffdc
2512label = %percentage_used%%
2513
2514[module/wlan]
2515type = internal/network
2516interface =
2517interval = 3.0
2518
2519format-connected = <ramp-signal> <label-connected>
2520format-connected-underline = #9f78e1
2521label-connected = %essid%
2522
2523format-disconnected =
2524;format-disconnected = <label-disconnected>
2525;format-disconnected-underline = ${self.format-connected-underline}
2526;label-disconnected = %ifname% disconnected
2527;label-disconnected-foreground = ${colors.foreground-alt}
2528
2529ramp-signal-0 = 
2530ramp-signal-1 = 
2531ramp-signal-2 = 
2532ramp-signal-3 = 
2533ramp-signal-4 = 
2534ramp-signal-foreground = ${colors.foreground-alt}
2535
2536[module/eth]
2537type = internal/network
2538interface =
2539interval = 3.0
2540
2541format-connected-underline = #55aa55
2542format-connected-prefix = " "
2543format-connected-prefix-foreground = ${colors.foreground-alt}
2544label-connected = %local_ip%
2545
2546format-disconnected =
2547;format-disconnected = <label-disconnected>
2548;format-disconnected-underline = ${self.format-connected-underline}
2549;label-disconnected = %ifname% disconnected
2550;label-disconnected-foreground = ${colors.foreground-alt}
2551
2552[module/date]
2553type = internal/date
2554interval = 5
2555
2556date =
2557date-alt = " %Y-%m-%d"
2558
2559time = %H:%M
2560time-alt = %H:%M:%S
2561
2562format-prefix = 
2563format-prefix-foreground = ${colors.foreground-alt}
2564format-underline = #0a6cf5
2565
2566label = %date% %time%
2567
2568[module/volume]
2569type = internal/volume
2570
2571format-volume = <label-volume> <bar-volume>
2572label-volume = vol
2573label-volume-foreground = ${root.foreground}
2574
2575format-muted-prefix = " "
2576format-muted-foreground = ${colors.foreground-alt}
2577label-muted = mute
2578
2579bar-volume-width = 10
2580bar-volume-foreground-0 = #55aa55
2581bar-volume-foreground-1 = #55aa55
2582bar-volume-foreground-2 = #55aa55
2583bar-volume-foreground-3 = #55aa55
2584bar-volume-foreground-4 = #55aa55
2585bar-volume-foreground-5 = #f5a70a
2586bar-volume-foreground-6 = #ff5555
2587bar-volume-gradient = false
2588bar-volume-indicator = |
2589bar-volume-indicator-font = 2
2590bar-volume-fill = ─
2591bar-volume-fill-font = 2
2592bar-volume-empty = ─
2593bar-volume-empty-font = 2
2594bar-volume-empty-foreground = ${colors.foreground-alt}
2595
2596[module/battery]
2597type = internal/battery
2598battery = BAT0
2599adapter = ADP1
2600full-at = 64
2601
2602format-charging = <animation-charging> <label-charging>
2603format-charging-underline = #ffb52a
2604
2605format-discharging = <ramp-capacity> <label-discharging>
2606format-discharging-underline = ${self.format-charging-underline}
2607
2608format-full-prefix = " "
2609format-full-prefix-foreground = ${colors.foreground-alt}
2610format-full-underline = ${self.format-charging-underline}
2611
2612ramp-capacity-0 = 
2613ramp-capacity-1 = 
2614ramp-capacity-2 = 
2615ramp-capacity-foreground = ${colors.foreground-alt}
2616
2617animation-charging-0 = 
2618animation-charging-1 = 
2619animation-charging-2 = 
2620animation-charging-foreground = ${colors.foreground-alt}
2621animation-charging-framerate = 750
2622
2623[module/temperature]
2624type = internal/temperature
2625thermal-zone = 1
2626warn-temperature = 66
2627
2628format = <ramp> <label>
2629format-underline = #f50a4d
2630format-warn = <ramp> <label-warn>
2631format-warn-underline = ${self.format-underline}
2632
2633label = %temperature%
2634label-warn = %temperature%
2635label-warn-foreground = ${colors.secondary}
2636
2637ramp-0 = 
2638ramp-1 = 
2639ramp-2 = 
2640ramp-foreground = ${colors.foreground-alt}
2641
2642[module/powermenu]
2643type = custom/menu
2644
2645format-spacing = 1
2646
2647label-open = 
2648label-open-foreground = ${colors.secondary}
2649label-close =  cancel
2650label-close-foreground = ${colors.secondary}
2651label-separator = |
2652label-separator-foreground = ${colors.foreground-alt}
2653
2654menu-0-0 = reboot
2655menu-0-0-exec = menu-open-1
2656menu-0-1 = power off
2657menu-0-1-exec = menu-open-2
2658
2659menu-1-0 = cancel
2660menu-1-0-exec = menu-open-0
2661menu-1-1 = reboot
2662menu-1-1-exec = sudo reboot
2663
2664menu-2-0 = power off
2665menu-2-0-exec = sudo poweroff
2666menu-2-1 = cancel
2667menu-2-1-exec = menu-open-0
2668
2669[module/mail]
2670type = custom/script
2671interval = 60
2672format = <label>
2673format-prefix = " "
2674format-prefix-foreground = ${colors.foreground-alt}
2675format-underline = #0a6cf5
2676exec = notmuch count tag:unread
2677
2678[settings]
2679screenchange-reload = true
2680;compositing-background = xor
2681;compositing-background = screen
2682;compositing-foreground = source
2683;compositing-border = over
2684
2685[global/wm]
2686margin-top = 0
2687margin-bottom = 0
2688
2689; vim:ft=dosini
2690#+end_src
2691
2692*** polybar-launch
2693:PROPERTIES:
2e877d14 2694:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
1656853a
AB
2695:END:
2696
2e877d14 2697#+begin_src sh :tangle no
1656853a
AB
2698# Terminate already running bar instances
2699killall -q polybar
2700
2701# Wait until the processes have been shut down
2702while pgrep -x polybar >/dev/null; do sleep 1; done
2703
2704# Launch main bar
2705polybar main &
2706
2707echo "Bars launched..."
2708#+end_src
2709
b165a3e5
AB
2710** PowerTOP
2711:PROPERTIES:
2712:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2713:END:
2714
2715#+begin_src conf
2716[Unit]
2717Description=Powertop tunings
2718
2719[Service]
2720ExecStart=/usr/bin/powertop --auto-tune
2721RemainAfterExit=true
2722
2723[Install]
2724WantedBy=multi-user.target
2725#+end_src
2726
1656853a
AB
2727** ranger
2728
2729*** rc.conf
2730:PROPERTIES:
2731:header-args+: :tangle ~/.config/ranger/rc.conf
2732:END:
2733
2734#+begin_src conf :tangle no
2735# ===================================================================
2736# This file contains the default startup commands for ranger.
2737# To change them, it is recommended to create the file
2738# ~/.config/ranger/rc.conf and add your custom commands there.
2739#
2740# If you copy this whole file there, you may want to set the environment
2741# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2742#
2743# The purpose of this file is mainly to define keybindings and settings.
2744# For running more complex python code, please create a plugin in "plugins/" or
2745# a command in "commands.py".
2746#
2747# Each line is a command that will be run before the user interface
2748# is initialized. As a result, you can not use commands which rely
2749# on the UI such as :delete or :mark.
2750# ===================================================================
2751
2752# ===================================================================
2753# == Options
2754# ===================================================================
2755
2756# How many columns are there, and what are their relative widths?
2757set column_ratios 1,3,4
2758
2759# Which files should be hidden? (regular expression)
2760set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2761
2762# Show hidden files? You can toggle this by typing 'zh'
2763set show_hidden false
2764
2765# Ask for a confirmation when running the "delete" command?
2766# Valid values are "always" (default), "never", "multiple"
2767# With "multiple", ranger will ask only if you delete multiple files at once.
2768set confirm_on_delete multiple
2769
2770# Which script is used to generate file previews?
2771# ranger ships with scope.sh, a script that calls external programs (see
2772# README for dependencies) to preview images, archives, etc.
2773set preview_script ~/.config/ranger/scope.sh
2774
2775# Use the external preview script or display simple plain text previews?
2776set use_preview_script true
2777
2778# Open all images in this directory when running certain image viewers
2779# like feh or sxiv? You can still open selected files by marking them.
2780set open_all_images true
2781
2782# Be aware of version control systems and display information.
2783set vcs_aware false
2784
2785# State of the three backends git, hg, bzr. The possible states are
2786# disabled, local (only show local info), enabled (show local and remote
2787# information).
2788set vcs_backend_git enabled
2789set vcs_backend_hg disabled
2790set vcs_backend_bzr disabled
2791
2792# Preview images in full color with the external command "w3mimgpreview"?
2793# This requires the console web browser "w3m" and a supported terminal.
2794# It has been successfully tested with "xterm" and "urxvt" without tmux.
2795set preview_images true
2796
2797# Use a unicode "..." character to mark cut-off filenames?
2798set unicode_ellipsis false
2799
2800# Show dotfiles in the bookmark preview box?
2801set show_hidden_bookmarks true
2802
2803# Which colorscheme to use? These colorschemes are available by default:
2804# default, jungle, snow
2805set colorscheme default
2806
2807# Preview files on the rightmost column?
2808# And collapse (shrink) the last column if there is nothing to preview?
2809set preview_files true
2810set preview_directories true
2811set collapse_preview true
2812
2813# Save the console history on exit?
2814set save_console_history true
2815
2816# Draw the status bar on top of the browser window (default: bottom)
2817set status_bar_on_top false
2818
2819# Draw a progress bar in the status bar which displays the average state of all
2820# currently running tasks which support progress bars?
2821set draw_progress_bar_in_status_bar true
2822
2823# Draw borders around columns?
2824set draw_borders true
2825
2826# Display the directory name in tabs?
2827set dirname_in_tabs false
2828
2829# Enable the mouse support?
2830set mouse_enabled true
2831
2832# Display the file size in the main column or status bar?
2833set display_size_in_main_column true
2834set display_size_in_status_bar true
2835
2836# Display files tags in all columns or only in main column?
2837set display_tags_in_all_columns true
2838
2839# Set a title for the window?
2840set update_title false
2841
2842# Set the title to "ranger" in the tmux program?
2843set update_tmux_title false
2844
2845# Shorten the title if it gets long? The number defines how many
2846# directories are displayed at once, 0 turns off this feature.
2847set shorten_title 3
2848
2849# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2850set tilde_in_titlebar false
2851
2852# How many directory-changes or console-commands should be kept in history?
2853set max_history_size 20
2854set max_console_history_size 50
2855
2856# Try to keep so much space between the top/bottom border when scrolling:
2857set scroll_offset 8
2858
2859# Flush the input after each key hit? (Noticable when ranger lags)
2860set flushinput true
2861
2862# Padding on the right when there's no preview?
2863# This allows you to click into the space to run the file.
2864set padding_right true
2865
2866# Save bookmarks (used with mX and `X) instantly?
2867# This helps to synchronize bookmarks between multiple ranger
2868# instances but leads to *slight* performance loss.
2869# When false, bookmarks are saved when ranger is exited.
2870set autosave_bookmarks true
2871
2872# You can display the "real" cumulative size of directories by using the
2873# command :get_cumulative_size or typing "dc". The size is expensive to
2874# calculate and will not be updated automatically. You can choose
2875# to update it automatically though by turning on this option:
2876set autoupdate_cumulative_size false
2877
2878# Turning this on makes sense for screen readers:
2879set show_cursor false
2880
2881# One of: size, basename, mtime, type
2882set sort natural
2883
2884# Additional sorting options
2885set sort_reverse false
2886set sort_case_insensitive true
2887set sort_directories_first true
2888
2889# Enable this if key combinations with the Alt Key don't work for you.
2890# (Especially on xterm)
2891set xterm_alt_key false
2892
2893# ===================================================================
2894# == Local Options
2895# ===================================================================
2896# You can set local options that only affect a single directory.
2897
2898# Examples:
2899# setlocal path=~/downloads sort mtime
2900
2901# ===================================================================
2902# == Command Aliases in the Console
2903# ===================================================================
2904
2905alias e edit
2906alias q quit
2907alias q! quitall
2908alias qall quitall
2909alias setl setlocal
2910
2911alias filter scout -prt
2912alias find scout -aet
2913alias mark scout -mr
2914alias unmark scout -Mr
2915alias search scout -rs
2916alias search_inc scout -rts
2917alias travel scout -aefiklst
2918
2919# ===================================================================
2920# == Define keys for the browser
2921# ===================================================================
2922
2923# Basic
2924map Q quit!
2925map q quit
2926copymap q ZZ ZQ
2927
2928map R reload_cwd
2929map <C-r> reset
2930map <C-l> redraw_window
2931map <C-c> abort
2932map <esc> change_mode normal
2933
2934map i display_file
2935map ? help
2936map W display_log
2937map w taskview_open
2938map S shell $SHELL
2939
2940map : console
2941map ; console
2942map ! console shell
2943map @ console -p6 shell %%s
2944map # console shell -p
2945map s console shell
2946map r chain draw_possible_programs; console open_with
2947map f console find
2948map cd console cd
2949
2950# Tagging / Marking
2951map t tag_toggle
2952map ut tag_remove
2953map "<any> tag_toggle tag=%any
2954map <Space> mark_files toggle=True
2955map v mark_files all=True toggle=True
2956map uv mark_files all=True val=False
2957map V toggle_visual_mode
2958map uV toggle_visual_mode reverse=True
2959
2960# For the nostalgics: Midnight Commander bindings
2961map <F1> help
2962map <F3> display_file
2963map <F4> edit
2964map <F5> copy
2965map <F6> cut
2966map <F7> console mkdir
2967map <F8> console delete
2968map <F10> exit
2969
2970# In case you work on a keyboard with dvorak layout
2971map <UP> move up=1
2972map <DOWN> move down=1
2973map <LEFT> move left=1
2974map <RIGHT> move right=1
2975map <HOME> move to=0
2976map <END> move to=-1
2977map <PAGEDOWN> move down=1 pages=True
2978map <PAGEUP> move up=1 pages=True
2979map <CR> move right=1
2980map <DELETE> console delete
2981map <INSERT> console touch
2982
2983# VIM-like
2984copymap <UP> k
2985copymap <DOWN> j
2986copymap <LEFT> h
2987copymap <RIGHT> l
2988copymap <HOME> gg
2989copymap <END> G
2990copymap <PAGEDOWN> <C-F>
2991copymap <PAGEUP> <C-B>
2992
2993map J move down=0.5 pages=True
2994map K move up=0.5 pages=True
2995copymap J <C-D>
2996copymap K <C-U>
2997
2998# Jumping around
2999map H history_go -1
3000map L history_go 1
3001map ] move_parent 1
3002map [ move_parent -1
3003map } traverse
3004
3005map gh cd ~
3006map ge cd /etc
3007map gu cd /usr
3008map gd cd /dev
3009map gl cd -r .
3010map gL cd -r %f
3011map go cd /opt
3012map gv cd /var
3013map gm cd /media
3014map gM cd /mnt
3015map gs cd /srv
3016map gr cd /
3017map gR eval fm.cd(ranger.RANGERDIR)
3018map g/ cd /
3019map g? cd /usr/share/doc/ranger
3020
3021# External Programs
3022map E edit
3023map du shell -p du --max-depth=1 -h --apparent-size
3024map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3025map yp shell -d echo -n %d/%f | xsel -i
3026map yd shell -d echo -n %d | xsel -i
3027map yn shell -d echo -n %f | xsel -i
3028
3029# Filesystem Operations
3030map = chmod
3031
3032map cw console rename
3033map A eval fm.open_console('rename ' + fm.thisfile.basename)
3034map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3035
3036map pp paste
3037map po paste overwrite=True
3038map pl paste_symlink relative=False
3039map pL paste_symlink relative=True
3040map phl paste_hardlink
3041map pht paste_hardlinked_subtree
3042
3043map dd cut
3044map ud uncut
3045map da cut mode=add
3046map dr cut mode=remove
3047
3048map yy copy
3049map uy uncut
3050map ya copy mode=add
3051map yr copy mode=remove
3052
3053# Temporary workarounds
3054map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3055map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3056map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3057map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3058map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3059map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3060map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3061map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3062
3063# Searching
3064map / console search
3065map n search_next
3066map N search_next forward=False
3067map ct search_next order=tag
3068map cs search_next order=size
3069map ci search_next order=mimetype
3070map cc search_next order=ctime
3071map cm search_next order=mtime
3072map ca search_next order=atime
3073
3074# Tabs
3075map <C-n> tab_new ~
3076map <C-w> tab_close
3077map <TAB> tab_move 1
3078map <S-TAB> tab_move -1
3079map <A-Right> tab_move 1
3080map <A-Left> tab_move -1
3081map gt tab_move 1
3082map gT tab_move -1
3083map gn tab_new ~
3084map gc tab_close
3085map uq tab_restore
3086map <a-1> tab_open 1
3087map <a-2> tab_open 2
3088map <a-3> tab_open 3
3089map <a-4> tab_open 4
3090map <a-5> tab_open 5
3091map <a-6> tab_open 6
3092map <a-7> tab_open 7
3093map <a-8> tab_open 8
3094map <a-9> tab_open 9
3095
3096# Sorting
3097map or toggle_option sort_reverse
3098map os chain set sort=size; set sort_reverse=False
3099map ob chain set sort=basename; set sort_reverse=False
3100map on chain set sort=natural; set sort_reverse=False
3101map om chain set sort=mtime; set sort_reverse=False
3102map oc chain set sort=ctime; set sort_reverse=False
3103map oa chain set sort=atime; set sort_reverse=False
3104map ot chain set sort=type; set sort_reverse=False
3105
3106map oS chain set sort=size; set sort_reverse=True
3107map oB chain set sort=basename; set sort_reverse=True
3108map oN chain set sort=natural; set sort_reverse=True
3109map oM chain set sort=mtime; set sort_reverse=True
3110map oC chain set sort=ctime; set sort_reverse=True
3111map oA chain set sort=atime; set sort_reverse=True
3112map oT chain set sort=type; set sort_reverse=True
3113
3114map dc get_cumulative_size
3115
3116# Settings
3117map zc toggle_option collapse_preview
3118map zd toggle_option sort_directories_first
3119map zh toggle_option show_hidden
3120map <C-h> toggle_option show_hidden
3121map zi toggle_option flushinput
3122map zm toggle_option mouse_enabled
3123map zp toggle_option preview_files
3124map zP toggle_option preview_directories
3125map zs toggle_option sort_case_insensitive
3126map zu toggle_option autoupdate_cumulative_size
3127map zv toggle_option use_preview_script
3128map zf console filter
3129
3130# Bookmarks
3131map `<any> enter_bookmark %any
3132map '<any> enter_bookmark %any
3133map m<any> set_bookmark %any
3134map um<any> unset_bookmark %any
3135
3136map m<bg> draw_bookmarks
3137copymap m<bg> um<bg> `<bg> '<bg>
3138
3139# Generate all the chmod bindings with some python help:
3140eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3141eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3142eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3143eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3144eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3145
3146eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3147eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3148eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3149eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3150eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3151
3152# ===================================================================
3153# == Define keys for the console
3154# ===================================================================
3155# Note: Unmapped keys are passed directly to the console.
3156
3157# Basic
3158cmap <tab> eval fm.ui.console.tab()
3159cmap <s-tab> eval fm.ui.console.tab(-1)
3160cmap <ESC> eval fm.ui.console.close()
3161cmap <CR> eval fm.ui.console.execute()
3162cmap <C-l> redraw_window
3163
3164copycmap <ESC> <C-c>
3165copycmap <CR> <C-j>
3166
3167# Move around
3168cmap <up> eval fm.ui.console.history_move(-1)
3169cmap <down> eval fm.ui.console.history_move(1)
3170cmap <left> eval fm.ui.console.move(left=1)
3171cmap <right> eval fm.ui.console.move(right=1)
3172cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3173cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3174
3175# Line Editing
3176cmap <backspace> eval fm.ui.console.delete(-1)
3177cmap <delete> eval fm.ui.console.delete(0)
3178cmap <C-w> eval fm.ui.console.delete_word()
3179cmap <C-k> eval fm.ui.console.delete_rest(1)
3180cmap <C-u> eval fm.ui.console.delete_rest(-1)
3181cmap <C-y> eval fm.ui.console.paste()
3182
3183# And of course the emacs way
3184copycmap <up> <C-p>
3185copycmap <down> <C-n>
3186copycmap <left> <C-b>
3187copycmap <right> <C-f>
3188copycmap <home> <C-a>
3189copycmap <end> <C-e>
3190copycmap <delete> <C-d>
3191copycmap <backspace> <C-h>
3192
3193# Note: There are multiple ways to express backspaces. <backspace> (code 263)
3194# and <backspace2> (code 127). To be sure, use both.
3195copycmap <backspace> <backspace2>
3196
3197# This special expression allows typing in numerals:
3198cmap <allow_quantifiers> false
3199
3200# ===================================================================
3201# == Pager Keybindings
3202# ===================================================================
3203
3204# Movement
3205pmap <down> pager_move down=1
3206pmap <up> pager_move up=1
3207pmap <left> pager_move left=4
3208pmap <right> pager_move right=4
3209pmap <home> pager_move to=0
3210pmap <end> pager_move to=-1
3211pmap <pagedown> pager_move down=1.0 pages=True
3212pmap <pageup> pager_move up=1.0 pages=True
3213pmap <C-d> pager_move down=0.5 pages=True
3214pmap <C-u> pager_move up=0.5 pages=True
3215
3216copypmap <UP> k <C-p>
3217copypmap <DOWN> j <C-n> <CR>
3218copypmap <LEFT> h
3219copypmap <RIGHT> l
3220copypmap <HOME> g
3221copypmap <END> G
3222copypmap <C-d> d
3223copypmap <C-u> u
3224copypmap <PAGEDOWN> n f <C-F> <Space>
3225copypmap <PAGEUP> p b <C-B>
3226
3227# Basic
3228pmap <ESC> pager_close
3229copypmap <ESC> q Q i <F3>
3230pmap E edit_file
3231
3232# ===================================================================
3233# == Taskview Keybindings
3234# ===================================================================
3235
3236# Movement
3237tmap <up> taskview_move up=1
3238tmap <down> taskview_move down=1
3239tmap <home> taskview_move to=0
3240tmap <end> taskview_move to=-1
3241tmap <pagedown> taskview_move down=1.0 pages=True
3242tmap <pageup> taskview_move up=1.0 pages=True
3243tmap <C-d> taskview_move down=0.5 pages=True
3244tmap <C-u> taskview_move up=0.5 pages=True
3245
3246copytmap <UP> k <C-p>
3247copytmap <DOWN> j <C-n> <CR>
3248copytmap <HOME> g
3249copytmap <END> G
3250copytmap <C-u> u
3251copytmap <PAGEDOWN> n f <C-F> <Space>
3252copytmap <PAGEUP> p b <C-B>
3253
3254# Changing priority and deleting tasks
3255tmap J eval -q fm.ui.taskview.task_move(-1)
3256tmap K eval -q fm.ui.taskview.task_move(0)
3257tmap dd eval -q fm.ui.taskview.task_remove()
3258tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3259tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3260tmap <delete> eval -q fm.ui.taskview.task_remove()
3261
3262# Basic
3263tmap <ESC> taskview_close
3264copytmap <ESC> q Q w <C-c>
3265#+end_src
3266
3267*** scope.sh
3268:PROPERTIES:
2e877d14 3269:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
1656853a
AB
3270:END:
3271
2e877d14 3272#+begin_src sh :tangle no
1656853a
AB
3273# ranger supports enhanced previews. If the option "use_preview_script"
3274# is set to True and this file exists, this script will be called and its
3275# output is displayed in ranger. ANSI color codes are supported.
3276
3277# NOTES: This script is considered a configuration file. If you upgrade
3278# ranger, it will be left untouched. (You must update it yourself.)
3279# Also, ranger disables STDIN here, so interactive scripts won't work properly
3280
3281# Meanings of exit codes:
3282# code | meaning | action of ranger
3283# -----+------------+-------------------------------------------
3284# 0 | success | success. display stdout as preview
3285# 1 | no preview | failure. display no preview at all
3286# 2 | plain text | display the plain content of the file
3287# 3 | fix width | success. Don't reload when width changes
3288# 4 | fix height | success. Don't reload when height changes
3289# 5 | fix both | success. Don't ever reload
3290
3291# Meaningful aliases for arguments:
3292path="$1" # Full path of the selected file
3293width="$2" # Width of the preview pane (number of fitting characters)
3294height="$3" # Height of the preview pane (number of fitting characters)
3295
3296maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3297
3298# Find out something about the file:
3299mimetype=$(file --mime-type -Lb "$path")
3300extension=${path##*.}
3301
3302# Functions:
3303# runs a command and saves its output into $output. Useful if you need
3304# the return value AND want to use the output in a pipe
3305try() { output=$(eval '"$@"'); }
3306
3307# writes the output of the previouosly used "try" command
3308dump() { echo "$output"; }
3309
3310# a common post-processing function used after most commands
3311trim() { head -n "$maxln"; }
3312
3313# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3314highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3315
3316case "$extension" in
3317 # Archive extensions:
3318 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3319 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3320 try als "$path" && { dump | trim; exit 0; }
3321 try acat "$path" && { dump | trim; exit 3; }
3322 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3323 exit 1;;
3324 rar)
3325 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3326 # PDF documents:
3327 pdf)
3328 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3329 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3330 # BitTorrent Files
3331 torrent)
3332 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3333 # HTML Pages:
3334 htm|html|xhtml)
3335 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3336 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3337 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3338 ;; # fall back to highlight/cat if the text browsers fail
3339esac
3340
3341case "$mimetype" in
3342 # Syntax highlight for text files:
3343 text/* | */xml)
3344 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3345 # Ascii-previews of images:
3346 image/*)
3347 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3348 # Display information about media files:
3349 video/* | audio/*)
3350 exiftool "$path" && exit 5
3351 # Use sed to remove spaces so the output fits into the narrow window
3352 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3353esac
3354
3355exit 1
3356#+end_src
3357
2f1dcf9d
AB
3358** redshift
3359:PROPERTIES:
e2149232 3360:header-args+: :tangle ~/.config/redshift.conf :comments none
2f1dcf9d
AB
3361:END:
3362
3363#+begin_src conf
3364; Global settings for redshift
3365[redshift]
3366; Set the day and night screen temperatures (Neutral is 6500K)
3367;temp-day=5700
3368;temp-night=3500
3369
3370;temp-day=6500
3371temp-day=6200
3372;temp-night=4800
3373;temp-night=5000
3374;temp-night=4500
3375temp-night=4000
3376
3377; Enable/Disable a smooth transition between day and night
3378; 0 will cause a direct change from day to night screen temperature.
3379; 1 will gradually increase or decrease the screen temperature.
3380transition=1
3381
3382; Set the screen brightness. Default is 1.0.
3383;brightness=0.9
3384; It is also possible to use different settings for day and night
3385; since version 1.8.
3386;brightness-day=0.7
3387;brightness-night=0.4
3388; Set the screen gamma (for all colors, or each color channel
3389; individually)
3390;gamma=0.8
3391;gamma=1.0
3392;gamma=0.8:0.7:0.8
3393; This can also be set individually for day and night since
3394; version 1.10.
3395;gamma-day=0.8:0.7:0.8
3396;gamma-night=0.6
3397
3398; Set the location-provider: 'geoclue2' or 'manual'
3399; type 'redshift -l list' to see possible values.
3400; The location provider settings are in a different section.
3401;location-provider=manual
3402location-provider=geoclue2
3403
3404; Set the adjustment-method: 'randr', 'vidmode'
3405; type 'redshift -m list' to see all possible values.
3406; 'randr' is the preferred method, 'vidmode' is an older API.
3407; but works in some cases when 'randr' does not.
3408; The adjustment method settings are in a different section.
3409adjustment-method=randr
3410
3411; Configuration of the location-provider:
3412; type 'redshift -l PROVIDER:help' to see the settings.
3413; ex: 'redshift -l manual:help'
3414; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3415; are negative numbers.
3416;[manual]
3417;lat=48.1
3418;lon=11.6
3419
3420; Configuration of the adjustment-method
3421; type 'redshift -m METHOD:help' to see the settings.
3422; ex: 'redshift -m randr:help'
3423; In this example, randr is configured to adjust screen 1.
3424; Note that the numbering starts from 0, so this is actually the
3425; second screen. If this option is not specified, Redshift will try
3426; to adjust _all_ screens.
3427;[randr]
3428;screen=1
3429#+end_src
3430
3431** rofi
3432:PROPERTIES:
3433:header-args+: :tangle ~/.config/rofi/config
3434:END:
3435
3436#+begin_src conf
3437rofi.font: Ubuntu Mono 13
3438! rofi.font: Inconsolata 16
3439! rofi.font: Iosevka 13
3440! rofi.font: Source Code Pro 11
3441rofi.modi: run,window
3442! rofi.width: 640
3443rofi.width: 600
3444!rofi.location: 2
3445!rofi.yoffset: 200
3446rofi.monitor: -1
3447!rofi.lines: 10
3448
3449!rofi.theme: /usr/share/rofi/themes//Arc.rasi
3450!rofi.theme: /usr/share/rofi/themes//Paper.rasi
3451!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3452
3453rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3454#+end_src
3455
3456** rofi-pass
3457:PROPERTIES:
3458:header-args+: :tangle ~/.config/rofi-pass/config
3459:END:
3460
3461#+begin_src conf
3462# permanently set alternative root dir
3463# root=/path/to/root
3464
3465# rofi command. Make sure to have "$@" as last argument
3466_rofi () {
3467 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
61f337f4 3468 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
2f1dcf9d
AB
3469}
3470
3471# xdotool needs the keyboard layout to be set using setxkbmap
3472# You can do this in your autostart scripts (e.g. xinitrc)
3473
3474# If for some reason, you cannot do this, you can set the command here.
3475# and set fix_layout to true
3476fix_layout=false
3477
3478layout_cmd () {
3479 setxkbmap us
3480}
3481
3482# fields to be used
3483URL_field='url'
3484USERNAME_field='user'
3485AUTOTYPE_field='autotype'
3486
3487# delay to be used for :delay keyword
3488delay=2
3489
3490## Programs to be used
3491# Editor
3492EDITOR='gvim -f'
3493
3494# Browser
3495BROWSER='chromium'
3496
3497## Misc settings
3498
3499default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3500auto_enter='false'
3501notify='false'
3502default_autotype='user :tab pass'
3503
3504# color of the help messages
3505# leave empty for autodetection
3506help_color="#4872FF"
3507
3508# Clipboard settings
3509# Possible options: primary, clipboard, both
3510clip=primary
3511
3512# Options for generating new password entries
3513# default_user is also used for password files that have no user field.
3514default_user=aminb
3515default_user2=aminban
3516password_length=30
3517
3518# Custom Keybindings
3519#autotype="Alt+1"
3520autotype="Alt+m"
3521type_user="Alt+2"
3522type_pass="Alt+3"
3523open_url="Alt+4"
3524copy_name="Alt+u"
3525copy_url="Alt+l"
3526copy_pass="Alt+p"
3527show="Alt+o"
3528copy_entry="Alt+2"
3529type_entry="Alt+1"
3530copy_menu="Alt+c"
3531action_menu="Alt+a"
3532type_menu="Alt+t"
3533help="Alt+h"
3534switch="Alt+x"
3535insert_pass="Alt+n"
3536#+end_src
3537
08e87a0a
AB
3538** TLP
3539
3540*** TODO enigma
3541*** plasma
3542
3543#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3544# ------------------------------------------------------------------------------
3545# tlp - Parameters for power saving
3546# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3547
3548# Hint: some features are disabled by default, remove the leading # to enable
3549# them.
3550
3551# Set to 0 to disable, 1 to enable TLP.
3552TLP_ENABLE=1
3553
3554# Operation mode when no power supply can be detected: AC, BAT.
3555# Concerns some desktop and embedded hardware only.
3556TLP_DEFAULT_MODE=AC
3557
3558# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3559# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3560TLP_PERSISTENT_DEFAULT=0
3561
3562# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3563# Non-zero value enables, zero disables laptop mode.
3564DISK_IDLE_SECS_ON_AC=0
3565DISK_IDLE_SECS_ON_BAT=2
3566
3567# Dirty page values (timeouts in secs).
3568MAX_LOST_WORK_SECS_ON_AC=15
3569MAX_LOST_WORK_SECS_ON_BAT=60
3570
3571# Hint: CPU parameters below are disabled by default, remove the leading #
3572# to enable them, otherwise kernel default values are used.
3573
3574# Select a CPU frequency scaling governor.
3575# Intel Core i processor with intel_pstate driver:
3576# powersave(*), performance.
3577# Older hardware with acpi-cpufreq driver:
3578# ondemand(*), powersave, performance, conservative, schedutil.
3579# (*) is recommended.
3580# Hint: use tlp-stat -p to show the active driver and available governors.
3581# Important:
3582# powersave for intel_pstate and ondemand for acpi-cpufreq are power
3583# efficient for *almost all* workloads and therefore kernel and most
3584# distributions have chosen them as defaults. If you still want to change,
3585# you should know what you're doing! You *must* disable your distribution's
3586# governor settings or conflicts will occur.
3587#CPU_SCALING_GOVERNOR_ON_AC=powersave
3588#CPU_SCALING_GOVERNOR_ON_BAT=powersave
3589
3590# Set the min/max frequency available for the scaling governor.
3591# Possible values strongly depend on your CPU. For available frequencies see
3592# the output of tlp-stat -p.
3593#CPU_SCALING_MIN_FREQ_ON_AC=0
3594#CPU_SCALING_MAX_FREQ_ON_AC=0
3595#CPU_SCALING_MIN_FREQ_ON_BAT=0
3596#CPU_SCALING_MAX_FREQ_ON_BAT=0
3597
3598# Set energy performance hints (HWP) for Intel P-state governor:
3599# performance, balance_performance, default, balance_power, power
3600# Values are given in order of increasing power saving.
3601# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3602CPU_HWP_ON_AC=balance_performance
3603CPU_HWP_ON_BAT=balance_power
3604
3605# Set Intel P-state performance: 0..100 (%).
3606# Limit the max/min P-state to control the power dissipation of the CPU.
3607# Values are stated as a percentage of the available performance.
3608# Requires an Intel Core i processor with intel_pstate driver.
3609#CPU_MIN_PERF_ON_AC=0
3610#CPU_MAX_PERF_ON_AC=100
3611#CPU_MIN_PERF_ON_BAT=0
3612#CPU_MAX_PERF_ON_BAT=30
3613
3614# Set the CPU "turbo boost" feature: 0=disable, 1=allow
3615# Requires an Intel Core i processor.
3616# Important:
3617# - This may conflict with your distribution's governor settings
3618# - A value of 1 does *not* activate boosting, it just allows it
3619#CPU_BOOST_ON_AC=1
3620#CPU_BOOST_ON_BAT=0
3621
3622# Minimize number of used CPU cores/hyper-threads under light load conditions:
3623# 0=disable, 1=enable.
3624SCHED_POWERSAVE_ON_AC=0
3625SCHED_POWERSAVE_ON_BAT=1
3626
3627# Kernel NMI Watchdog:
3628# 0=disable (default, saves power), 1=enable (for kernel debugging only).
3629NMI_WATCHDOG=0
3630
3631# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3632# Frequency voltage pairs are written to:
3633# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3634# CAUTION: only use this, if you thoroughly understand what you are doing!
3635#PHC_CONTROLS="F:V F:V F:V F:V"
3636
3637# Set CPU performance versus energy savings policy:
3638# performance, balance-performance, default, balance-power, power.
3639# Values are given in order of increasing power saving.
3640# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3641ENERGY_PERF_POLICY_ON_AC=performance
3642ENERGY_PERF_POLICY_ON_BAT=balance-power
3643
3644# Disk devices; separate multiple devices with spaces (default: sda).
3645# Devices can be specified by disk ID also (lookup with: tlp diskid).
3646DISK_DEVICES="sda sdb"
3647
3648# Disk advanced power management level: 1..254, 255 (max saving, min, off).
3649# Levels 1..127 may spin down the disk; 255 allowable on most drives.
3650# Separate values for multiple disks with spaces. Use the special value 'keep'
3651# to keep the hardware default for the particular disk.
3652DISK_APM_LEVEL_ON_AC="254 254"
3653DISK_APM_LEVEL_ON_BAT="128 128"
3654
3655# Hard disk spin down timeout:
3656# 0: spin down disabled
3657# 1..240: timeouts from 5s to 20min (in units of 5s)
3658# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3659# See 'man hdparm' for details.
3660# Separate values for multiple disks with spaces. Use the special value 'keep'
3661# to keep the hardware default for the particular disk.
3662#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3663#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3664
3665# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3666# Separate values for multiple disks with spaces. Use the special value 'keep'
3667# to keep the kernel default scheduler for the particular disk.
3668#DISK_IOSCHED="cfq cfq"
3669
3670# AHCI link power management (ALPM) for disk devices:
3671# min_power, med_power_with_dipm(*), medium_power, max_performance.
3672# (*) Kernel >= 4.15 required, then recommended.
3673# Multiple values separated with spaces are tried sequentially until success.
3674SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3675SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3676
3677# Exclude host devices from AHCI link power management.
3678# Separate multiple hosts with spaces.
3679#SATA_LINKPWR_BLACKLIST="host1"
3680
3681# Runtime Power Management for AHCI host and disks devices:
3682# on=disable, auto=enable.
3683# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3684#AHCI_RUNTIME_PM_ON_AC=on
3685#AHCI_RUNTIME_PM_ON_BAT=on
3686
3687# Seconds of inactivity before disk is suspended.
3688AHCI_RUNTIME_PM_TIMEOUT=15
3689
3690# PCI Express Active State Power Management (PCIe ASPM):
3691# default, performance, powersave.
3692PCIE_ASPM_ON_AC=performance
3693PCIE_ASPM_ON_BAT=powersave
3694
3695# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3696# auto = mid on BAT, high on AC; default = use hardware defaults.
3697RADEON_POWER_PROFILE_ON_AC=high
3698RADEON_POWER_PROFILE_ON_BAT=low
3699
3700# Radeon dynamic power management method (DPM): battery, performance.
3701RADEON_DPM_STATE_ON_AC=performance
3702RADEON_DPM_STATE_ON_BAT=battery
3703
3704# Radeon DPM performance level: auto, low, high; auto is recommended.
3705RADEON_DPM_PERF_LEVEL_ON_AC=auto
3706RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3707
3708# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3709WIFI_PWR_ON_AC=off
3710WIFI_PWR_ON_BAT=on
3711
3712# Disable wake on LAN: Y/N.
3713WOL_DISABLE=Y
3714
3715# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3716# A value of 0 disables, >=1 enables power saving (recommended: 1).
3717SOUND_POWER_SAVE_ON_AC=0
3718SOUND_POWER_SAVE_ON_BAT=0
3719
3720# Disable controller too (HDA only): Y/N.
3721SOUND_POWER_SAVE_CONTROLLER=N
3722
3723# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3724# Drive can be powered on again by releasing (and reinserting) the eject lever
3725# or by pressing the disc eject button on newer models.
3726# Note: an UltraBay/MediaBay hard disk is never powered off.
3727BAY_POWEROFF_ON_AC=0
3728BAY_POWEROFF_ON_BAT=0
3729# Optical drive device to power off (default sr0).
3730BAY_DEVICE="sr0"
3731
3732# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3733RUNTIME_PM_ON_AC=on
3734RUNTIME_PM_ON_BAT=auto
3735
3736# Exclude PCI(e) device adresses the following list from Runtime PM
3737# (separate with spaces). Use lspci to get the adresses (1st column).
3738#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3739RUNTIME_PM_BLACKLIST="01:00.0"
3740
3741# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3742# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3743# prevents accidential power-on of dGPU in hybrid graphics setups.
3744# Use "" to disable the feature completely.
3745# Separate multiple drivers with spaces.
3746#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3747
3748# Set to 0 to disable, 1 to enable USB autosuspend feature.
3749USB_AUTOSUSPEND=1
3750
3751# Exclude listed devices from USB autosuspend (separate with spaces).
3752# Use lsusb to get the ids.
3753# Note: input devices (usbhid) are excluded automatically
3754#USB_BLACKLIST="1111:2222 3333:4444"
3755
3756# Bluetooth devices are excluded from USB autosuspend:
3757# 0=do not exclude, 1=exclude.
3758USB_BLACKLIST_BTUSB=0
3759
3760# Phone devices are excluded from USB autosuspend:
3761# 0=do not exclude, 1=exclude (enable charging).
3762USB_BLACKLIST_PHONE=0
3763
3764# Printers are excluded from USB autosuspend:
3765# 0=do not exclude, 1=exclude.
3766USB_BLACKLIST_PRINTER=1
3767
3768# WWAN devices are excluded from USB autosuspend:
3769# 0=do not exclude, 1=exclude.
3770USB_BLACKLIST_WWAN=1
3771
3772# Include listed devices into USB autosuspend even if already excluded
3773# by the blacklists above (separate with spaces).
3774# Use lsusb to get the ids.
3775#USB_WHITELIST="1111:2222 3333:4444"
3776
3777# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3778# (workaround for USB devices that cause shutdown problems).
3779#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3780
3781# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3782# on system startup: 0=disable, 1=enable.
3783# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3784# are ignored when this is enabled!
3785#RESTORE_DEVICE_STATE_ON_STARTUP=0
3786RESTORE_DEVICE_STATE_ON_STARTUP=1
3787
3788# Radio devices to disable on startup: bluetooth, wifi, wwan.
3789# Separate multiple devices with spaces.
3790#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3791
3792# Radio devices to enable on startup: bluetooth, wifi, wwan.
3793# Separate multiple devices with spaces.
3794#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3795
3796# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3797# (workaround for devices that are blocking shutdown).
3798#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3799
3800# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3801# (to prevent other operating systems from missing radios).
3802#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3803
3804# Radio devices to enable on AC: bluetooth, wifi, wwan.
3805#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3806
3807# Radio devices to disable on battery: bluetooth, wifi, wwan.
3808#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3809
3810# Radio devices to disable on battery when not in use (not connected):
3811# bluetooth, wifi, wwan.
3812#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3813
3814# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3815# required). Charging starts when the remaining capacity falls below the
3816# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3817# Main / Internal battery (values in %)
3818#START_CHARGE_THRESH_BAT0=75
3819#STOP_CHARGE_THRESH_BAT0=80
3820# Ultrabay / Slice / Replaceable battery (values in %)
3821#START_CHARGE_THRESH_BAT1=75
3822#STOP_CHARGE_THRESH_BAT1=80
3823
3824# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3825#RESTORE_THRESHOLDS_ON_BAT=1
3826
3827# ------------------------------------------------------------------------------
3828# tlp-rdw - Parameters for the radio device wizard
3829# Possible devices: bluetooth, wifi, wwan.
3830
3831# Hints:
3832# - Parameters are disabled by default, remove the leading # to enable them
3833# - Separate multiple radio devices with spaces
3834
3835# Radio devices to disable on connect.
3836#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3837#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3838#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3839
3840# Radio devices to enable on disconnect.
3841#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3842#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3843#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3844
3845# Radio devices to enable/disable when docked.
3846#DEVICES_TO_ENABLE_ON_DOCK=""
3847#DEVICES_TO_DISABLE_ON_DOCK=""
3848
3849# Radio devices to enable/disable when undocked.
3850#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3851#DEVICES_TO_DISABLE_ON_UNDOCK=""
3852#+end_src
3853
2e877d14
AB
3854** X
3855
3856*** xprofile
3857:PROPERTIES:
3858:header-args+: :tangle ~/.xprofile
3859:END:
3860
3861=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
3862contrary, it's automatically sourced by LightDM, my display manager of
3863choice.
3864
3865#+begin_src sh
6bab6a4a
AB
3866xset -b # disable bell
3867
2e877d14
AB
3868# setxkbmap -option compose:ralt
3869
3870setxkbmap -option ctrl:nocaps # turn capslock into control
3871setxkbmap -option altwin:swap_alt_win # swap alt and super
3872
3873if [ $(hostname) = "plasma" ]
3874then
3875 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
3876fi
3877
3878if [ $(hostname) = "enigma" ]
3879then
3880 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
3881fi
3882
3883light -Scrs "intel_backlight" 2
3884
3885source $HOME/.zprofile
3886
3887export _JAVA_AWT_WM_NONREPARENTING=1
3888export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
3889
2e877d14
AB
3890if [ $(hostname) = "plasma" ]
3891then
c0132386 3892 unlock-def-gk.py &
2e877d14 3893fi
c0132386
AB
3894
3895bspwm &
2e877d14
AB
3896#+end_src
3897
3898*** X resources
3899
3900**** Xresources
3901:PROPERTIES:
3902:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
3903:END:
3904
3905#+begin_src conf-xdefaults
3906#include ".Xresources.d/fonts"
3907! #include ".Xresources.d/colors"
3908#include ".Xresources.d/emacs"
3909#include ".Xresources.d/rxvt-unicode"
3910#+end_src
3911
3912**** Xresources.d
3913
3914***** fonts
3915:PROPERTIES:
3916:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
3917:END:
3918
3919#+begin_src conf-xdefaults
3920Xft.lcdfilter: lcddefault
3921Xft.antialias: true
3922Xft.autohint: 0
3923Xft.hinting: true
3924Xft.hintstyle: hintslight
3925! Xft.hintstyle: hintfull
3926Xft.rgba: rgb
3927Xft.dpi: 96
3928#+end_src
3929
3930***** colors
3931:PROPERTIES:
3932:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
3933:END:
3934
3935#+begin_src conf-xdefaults :tangle no
3936#include "gruvbox-light.xresources"
3937! #include "gruvbox-dark.xresources"
3938#include "gruvbox-urxvt256.xresources"
3939#+end_src
3940
3941#+begin_src conf-xdefaults :tangle no
3942! -----------------------------------------------------------------------------
3943! File: gruvbox-light.xresources
3944! Description: Retro groove colorscheme generalized
3945! Author: morhetz <morhetz@gmail.com>
3946! Source: https://github.com/morhetz/gruvbox-generalized
3947! Last Modified: 6 Sep 2014
3948! -----------------------------------------------------------------------------
3949
3950! hard contrast: *background: #f9f5d7
3951*background: #fbf1c7
3952! soft contrast: *background: #f2e5bc
3953*foreground: #3c3836
3954! Black + DarkGrey
3955*color0: #fdf4c1
3956*color8: #928374
3957! DarkRed + Red
3958*color1: #cc241d
3959*color9: #9d0006
3960! DarkGreen + Green
3961*color2: #98971a
3962*color10: #79740e
3963! DarkYellow + Yellow
3964*color3: #d79921
3965*color11: #b57614
3966! DarkBlue + Blue
3967*color4: #458588
3968*color12: #076678
3969! DarkMagenta + Magenta
3970*color5: #b16286
3971*color13: #8f3f71
3972! DarkCyan + Cyan
3973*color6: #689d6a
3974*color14: #427b58
3975! LightGrey + White
3976*color7: #7c6f64
3977*color15: #3c3836
3978#+end_src
3979
3980#+begin_src conf-xdefaults :tangle no
3981! -----------------------------------------------------------------------------
3982! File: gruvbox-dark.xresources
3983! Description: Retro groove colorscheme generalized
3984! Author: morhetz <morhetz@gmail.com>
3985! Source: https://github.com/morhetz/gruvbox-generalized
3986! Last Modified: 6 Sep 2014
3987! -----------------------------------------------------------------------------
3988
3989! hard contrast: *background: #1d2021
3990*background: #282828
3991! soft contrast: *background: #32302f
3992*foreground: #ebdbb2
3993! Black + DarkGrey
3994*color0: #282828
3995*color8: #928374
3996! DarkRed + Red
3997*color1: #cc241d
3998*color9: #fb4934
3999! DarkGreen + Green
4000*color2: #98971a
4001*color10: #b8bb26
4002! DarkYellow + Yellow
4003*color3: #d79921
4004*color11: #fabd2f
4005! DarkBlue + Blue
4006*color4: #458588
4007*color12: #83a598
4008! DarkMagenta + Magenta
4009*color5: #b16286
4010*color13: #d3869b
4011! DarkCyan + Cyan
4012*color6: #689d6a
4013*color14: #8ec07c
4014! LightGrey + White
4015*color7: #a89984
4016*color15: #ebdbb2
4017#+end_src
4018
4019#+begin_src conf-xdefaults :tangle no
4020! -----------------------------------------------------------------------------
4021! File: gruvbox-urxvt256.xresources
4022! Description: Retro groove colorscheme generalized
4023! Author: morhetz <morhetz@gmail.com>
4024! Source: https://github.com/morhetz/gruvbox-generalized
4025! Last Modified: 13 Dec 2013
4026! -----------------------------------------------------------------------------
4027
4028URxvt.color24: #076678
4029URxvt.color66: #427b58
4030URxvt.color88: #9d0006
4031URxvt.color96: #8f3f71
4032URxvt.color100: #79740e
4033URxvt.color108: #8ec07c
4034URxvt.color109: #83a598
4035URxvt.color130: #af3a03
4036URxvt.color136: #b57614
4037URxvt.color142: #b8bb26
4038URxvt.color167: #fb4934
4039URxvt.color175: #d3869b
4040URxvt.color208: #fe8019
4041URxvt.color214: #fabd2f
4042URxvt.color223: #ebdbb2
4043URxvt.color228: #f2e5bc
4044URxvt.color229: #fbf1c7
4045URxvt.color230: #f9f5d7
4046URxvt.color234: #1d2021
4047URxvt.color235: #282828
4048URxvt.color236: #32302f
4049URxvt.color237: #3c3836
4050URxvt.color239: #504945
4051URxvt.color241: #665c54
4052URxvt.color243: #7c6f64
4053URxvt.color244: #928374
4054URxvt.color245: #928374
4055URxvt.color246: #a89984
4056URxvt.color248: #bdae93
4057URxvt.color250: #d5c4a1
4058#+end_src
4059
4060***** emacs
4061:PROPERTIES:
4062:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4063:END:
4064
4065#+begin_src conf-xdefaults
4066Emacs.menuBar: off
4067Emacs.toolBar: off
4068Emacs.verticalScrollBars: off
4069Emacs.cursorBlink: off
4070Emacs.FontBackend: xft,x
4071! Emacs.font: Ubuntu Mono-12
4072! Emacs.font: Triplicate T4C-11
4073! Emacs.font: Ubuntu Mono-10.5
4074! Emacs.font: Ubuntu Mono-12
4075! Emacs.font: Iosevka-11
4076
4077! Emacs.font: Fira Mono:size=15
4078! Emacs.font: DejaVu Sans Mono:size=15
4079! Emacs.font: Inconsolata:size=17
4080! Emacs.font: Inconsolata:size=16
4081! Emacs.font: Inconsolata LGC:size=14
4082! Emacs.font: Source Code Pro Medium-10.5
4083Emacs.font: Ubuntu Mono:size=16
4084! Emacs.font: Iosevka:size=16
4085#+end_src
4086
4087***** rxvt-unicode
4088:PROPERTIES:
4089:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4090:END:
4091
4092#+begin_src conf-xdefaults
4093! Font
4094URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4095URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4096URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4097URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4098
4099URxvt.xftAntialias: true
4100URxvt.letterSpace: 0
4101
4102URxvt.depth: 0
4103URxvt.loginShell: true
4104URxvt.saveLines: 100000
4105URxvt.internalBorder: 3
4106URxvt.lineSpace: 0
4107URxvt.scrollBar: false
4108URxvt.scrollStyle: rxvt
4109URxvt*scrollTtyOutput: false
4110URxvt*scrollWithBuffer: true
4111URxvt*scrollTtyKeypress: true
4112URxvt.keysym.Shift-Up: command:\033]720;1\007
4113URxvt.keysym.Shift-Down: command:\033]721;1\007
4114
4115URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4116URxvt.perl-ext: bidi
4117URxvt.bidi.enabled: 1
4118URxvt.url-select.launcher: firefox
4119URxvt.url-select.underline: true
4120URxvt.keysym.M-u: perl:url-select:select_next
4121URxvt.keysym.M-Escape: perl:keyboard-select:activate
4122URxvt.keysym.M-s: perl:keyboard-select:search
4123URxvt.url-launcher: /usr/bin/firefox
4124URxvt.matcher.button: 1
4125URxvt.iso14755: false
4126URxvt.iso14755_53: false
4127URxvt.keysym.M-c: perl:clipboard:copy
4128URxvt.keysym.M-v: perl:clipboard:paste
4129URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4130URxvt.keysym.C-Up: font-size:increase
4131URxvt.keysym.C-Down: font-size:decrease
4132URxvt.keysym.C-S-Up: font-size:incglobal
4133URxvt.keysym.C-S-Down: font-size:decglobal
4134URxvt.keysym.C-equal: font-size:reset
4135!URxvt.keysym.C-question: font-size:show
4136
4137URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4138
4139!urxvt*foreground: white
4140!urxvt*background: black
4141
4142!*color0: #2E3436
4143!*color1: #a40000
4144!*color2: #4E9A06
4145!*color3: #C4A000
4146!*color4: #3465A4
4147!*color5: #75507B
4148!*color6: #ce5c00
4149!*color7: #babdb9
4150!*color8: #555753
4151!*color9: #EF2929
4152!*color10: #8AE234
4153!*color11: #FCE94F
4154!*color12: #729FCF
4155!*color13: #AD7FA8
4156!*color14: #fcaf3e
4157!*color15: #EEEEEC
4158
4159!URxvt.foreground: #C8C8C8
4160!URxvt.background: #FFFFFF
4161
4162!! black
4163!*color0: #2E3436
4164!*color8: #555753
4165!! red
4166!*color1: #a40000
4167!*color9: #EF2929
4168!! green
4169!*color2: #4E9A06
4170!*color10: #8AE234
4171!! yellow
4172!*color3: #C4A000
4173!*color11: #FCE94F
4174!! blue
4175!*color4: #3465A4
4176!*color12: #729FCF
4177!! purple
4178!*color5: #75507B
4179!*color13: #AD7FA8
4180!! orange (replaces cyan)
4181!*color6: #ce5c00
4182!*color14: #fcaf3e
4183!! white
4184!*color7: #babdb9
4185!*color15: #EEEEEC
4186
4187! Tango colour theme for rxvt-unicode
4188URxvt.background: #FFFFFF
4189URxvt.foreground: #000000
4190
4191! Black
4192URxvt.color0: #2E3436
4193URxvt.color8: #757773
4194
4195! Red
4196URxvt.color1: #CC0000
4197URxvt.color9: #EF2929
4198
4199! Green
4200URxvt.color2: #4E9A06
4201URxvt.color10: #8AE234
4202
4203! Yellow
4204URxvt.color3: #C4A000
4205URxvt.color11: #FCE94F
4206
4207! Blue
4208URxvt.color4: #3465A4
4209URxvt.color12: #729FCF
4210
4211! Magenta
4212URxvt.color5: #75507B
4213URxvt.color13: #AD7FA8
4214
4215!! Cyan
4216!URxvt.color6: #06989A
4217!URxvt.color14: #34E2E2
4218! orange (replaces cyan)
4219*color6: #ce5c00
4220*color14: #fcaf3e
4221
4222! White
4223URxvt.color7: #D3D7CF
4224URxvt.color15: #EEEEEC
4225#+end_src
4226
69a6fe26
AB
4227** XDG
4228:PROPERTIES:
4229:header-args+: :tangle ~/.config/user-dirs.dirs
4230:END:
4231
4232#+begin_src conf
4233XDG_DESKTOP_DIR="$HOME/Desktop"
4234XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4235XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4236XDG_MUSIC_DIR="$HOME/usr/music"
4237XDG_PICTURES_DIR="$HOME/usr/pics"
4238XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4239XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4240XDG_VIDEOS_DIR="$HOME/usr/vids"
4241#+end_src
4242
4243** Zathura
4244:PROPERTIES:
4245:header-args+: :tangle ~/.config/zathura/zathurarc
4246:END:
4247
4248#+begin_src conf
4249set smooth-scroll true
4250set selection-clipboard clipboard
4251set zoom-step 05
4252set default-bg "#272727"
4253set statusbar-bg "#272727"
4254set inputbar-bg "#373737"
4255#+end_src
4256
b1f6f894
AB
4257** Zsh
4258
4259My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4260[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4261installed.
4262
4263*** zimrc
4264:PROPERTIES:
4265:header-args+: :tangle ~/.zimrc
4266:END:
4267
4268#+begin_src sh
4269
4270
4271#################
4272# CORE SETTINGS #
4273#################
4274
4275#
4276# Zim settings
4277#
4278
4279# Select what modules you would like enabled.
4280# The second line of modules may depend on options set by modules in the first
4281# line. These dependencies are noted on the respective module's README.md.
4282zmodules=(directory environment git git-info history input ssh utility custom \
4283 syntax-highlighting history-substring-search prompt completion)
4284
4285
4286###################
4287# MODULE SETTINGS #
4288###################
4289
4290#
4291# Prompt
4292#
4293
4294# Set your desired prompt here
4295zprompt_theme='pure'
4296#PURE_PROMPT_SYMBOL=λ
4297#PURE_PROMPT_SYMBOL=δ
4298PURE_PROMPT_SYMBOL=➜
4299
4300#
4301# Completion
4302#
4303
4304# set an optional host-specific filename for the completion cache file
4305# if none is provided, the default '.zcompdump' is used.
4306#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4307
4308#
4309# Utility
4310#
4311
4312# Uncomment to enable command correction prompts
4313# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4314setopt CORRECT
4315
4316#
4317# Environment
4318#
4319
4320# Set the string below to the desired terminal title format string.
4321# The terminal title is redrawn upon directory change, however, variables like
4322# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4323# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4324# The example below uses the following format: 'username@host:/current/directory'
4325ztermtitle='%n@%m:%~'
4326
4327#
4328# Input
4329#
4330
4331# Uncomment to enable double-dot expansion.
4332# This appends '../' to your input for each '.' you type after an initial '..'
4333#zdouble_dot_expand='true'
4334
4335#
4336# Syntax-Highlighting
4337#
4338
4339# This determines what highlighters will be used with the syntax-highlighting module.
4340# Documentation of the highlighters can be found here:
4341# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4342# For (u)rxvt, termite and gnome-terminal users,
4343# removing the 'cursor' highlighter will fix the disappearing cursor problem
4344#zhighlighters=(main brackets cursor)
4345zhighlighters=(main brackets pattern)
4346
4347
4348#
4349# SSH
4350#
4351
4352# Load these ssh identities with the ssh module
4353zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4354
4355
4356#
4357# Pacman
4358#
4359
4360# Set (optional) pacman front-end.
4361zpacman_frontend='yay'
4362
4363# Load any helper scripts as defined here
4364#zpacman_helper=(aur)
4365#+end_src
4366
4367*** zlogin
4368:PROPERTIES:
4369:header-args+: :tangle ~/.zlogin
4370:END:
4371
4372#+begin_src sh
4373
4374
4375#
4376# User configuration sourced by login shells
4377#
4378
4379# Initialize zim
4380[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4381#+end_src
4382
4383*** zprofile
4384:PROPERTIES:
4385:header-args+: :tangle ~/.zprofile
4386:END:
4387
4388#+begin_src sh
4389#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4390#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
50fff474 4391export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
b1f6f894
AB
4392export XDG_CONFIG_HOME=$HOME/.config
4393export XDG_DATA_HOME=$HOME/.local/share
4394export XDG_DATA_DIRS=/usr/local/share:/usr/share
4395export MAILDIR="$HOME/mail"
4396export CVS_RSH=ssh
4397#export MATHMODELS=$HOME/src/eiffel/mathmodels
4398#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4399#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4400
4401# Eiffel2Java stuff
4402#export JAVA_HOME=/usr/lib/jvm/default
4403#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4404#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4405#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4406
4407#export PATH="$HOME/usr/build/pvs:$PATH"
4408#export SBCLISP_HOME=/usr/share/sbcl-source
4409#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4410
4411export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4412
4413#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4414#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4415
88bb4858 4416if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
b1f6f894
AB
4417#+end_src
4418
4419*** zshenv
4420:PROPERTIES:
4421:header-args+: :tangle ~/.zshenv
4422:END:
4423
4424#+begin_src sh
4425# Ensure that a non-login, non-interactive shell has a defined environment.
4426if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4427 source "${ZDOTDIR:-$HOME}/.zprofile"
4428fi
4429#+end_src
4430
4431*** zshrc
4432:PROPERTIES:
4433:header-args+: :tangle ~/.zshrc
4434:END:
4435
4436#+begin_src sh
4437# Bash-like navigation
4438#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4439#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4440export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4441#ZLE_SPACE_SUFFIX_CHARS=$'|&'
4442
4443#disable -r time # disable shell reserved word
4444#alias time='time -p' # -p for POSIX output
4445
4446# rehash if last command was pacaur or pacman
4447# (so that zsh picks up changes in $PATH immediately)
4448TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4449
4450#
4451# User configuration sourced by interactive shells
4452#
4453
4454# Change default zim location
4455export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4456
4457# Start zim
4458[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4459
4460ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4461#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4462
4463setopt globdots
4464
4465source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4466source ~/.zsh/zsh-autopair/autopair.zsh
4467
4468
4469### fzf ###
4470
4471source /usr/share/fzf/key-bindings.zsh
4472source /usr/share/fzf/completion.zsh
4473
4474# Accept history selection instead of putting it on
4475# the command line
4476fzf-history-widget-accept() {
4477 fzf-history-widget
4478 zle accept-line
4479}
4480#zle -N fzf-history-widget-accept
4481#bindkey '^R' fzf-history-widget-accept
4482
4483# alt+c preview
4484export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4485
4486### fzf ###
4487
4488
4489# aliases
4490alias mpv="mpv --ytdl-format mp4"
4491alias mv="mv -iv"
4492alias cp="cp -iv"
4493alias scl=systemctl
4494alias jcl=journalctl
4495alias m="mbsync -Va; getmail; notmuch new"
4496alias best="youtube-dl -f best"
2a1be6b4 4497alias nixx="ssh amin@nix.aminb.org"
373a060a 4498alias fence="ssh aminb@fencepost.gnu.org"
b1f6f894
AB
4499
4500aur() {
4501 cd ~/usr/build
4502 git clone https://aur.archlinux.org/${1}.git
4503 cd ${1}
4504}
4505
4506# i-beam cursor
4507echo -e "\033[5 q"
4508#echo -e "\033[6 q"
4509#+end_src
4510
b13e2dc1
AB
4511* Scripts
4512
4513This section contains various useful scripts and the ones used by the
4514programs above. For instance, =toggle-tablet= for switching to and
4515from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4516Xfce's presentation mode which keeps the screen awake, and
4517=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4518exact brightness value.
4519
4520** rofi-light
4521:PROPERTIES:
4522:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4523:END:
4524
33c5a5cd 4525#+begin_src bash
b13e2dc1 4526cur=$(light -G)
c2ce9b12 4527val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
b13e2dc1
AB
4528light -S $val
4529#+end_src
4530
4531** toggle-layout
4532:PROPERTIES:
4533:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4534:END:
4535
33c5a5cd 4536#+begin_src bash
b13e2dc1
AB
4537lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4538
4539if [ "$lang" = "us" ]; then
4540 setxkbmap ir
4541else
4542 setxkbmap us
4543 # xmodmap $HOME/.Xmodmap
4544fi
4545#+end_src
4546
4547** toggle-presentation-mode
4548:PROPERTIES:
4549:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4550:END:
4551
33c5a5cd 4552#+begin_src bash
b13e2dc1
AB
4553xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4554#+end_src
33c5a5cd 4555
72f329ba
AB
4556** toggle-tablet
4557:PROPERTIES:
4558:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4559:END:
4560
4561This script toggles between a 'normal' mode and a 'tablet' mode, doing
4562a few things:
4563
4564- rotates the screen using =xrandr=, so that rotating the physical
4565 display of my X220t would have the laptop's battery on the right
4566 hand side,
4567- enables touch screen,
4568- properly rotates the stylus pen and touch screen pointers, and
4569- toggles between RGB and Vertical BGR sub-pixel order.
4570
4571#+begin_src bash
4572case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4573 0) # Screen is not rotated, we should rotate it right (90°)
4574 xrandr -o 3
4575 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4576 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4577 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4578 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4579 ;;
4580 1) # Currently top is rotated right, we should set it normal (0°)
4581 xrandr -o 0
4582 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4583 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4584 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4585 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4586 ;;
4587 *)
4588 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4589 exit 1
4590 ;;
4591esac
4592#+end_src
4593
2e877d14
AB
4594** unlock-def-gk.py
4595:PROPERTIES:
4596:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4597:END:
4598
4599#+begin_src python
4600import gnomekeyring as gk
4601# list_item_ids_sync('login')[0] == 1L
4602gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4603#+end_src
4604
4f183f2a
AB
4605** wp
4606
4607My little wallpaper changer script.
4608
4609*** wp
4610:PROPERTIES:
4611:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4612:END:
4613
4614#+begin_src bash :tangle no
4615export DISPLAY=:0
4616
4617case "$1" in
4618 "day")
4619 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4620 ;;
4621 "night")
4622 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4623 ;;
4624 *)
4625 echo $"Usage: $0 {day|night}"
4626 exit 1
4627esac
4628#+end_src
4629
4630*** wp-auto
4631:PROPERTIES:
4632:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4633:END:
4634
4635#+begin_src bash :tangle no
4636SED=$(which sed)
4637ROFI=$(which rofi)
4638
4639export DISPLAY=:0
4640HOUR=$(date +%H)
4641
4642if [ -z "${SED}" ]
4643then
4644 echo "Did not find 'sed', script cannot continue."
4645 exit 1
4646fi
4647if [ -z "${ROFI}" ]
4648then
4649 echo "Did not find rofi, there is no point to continue."
4650 exit 1
4651fi
4652
4653###
4654# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4655# Repeated calls should leave the config clean-ish
4656###
4657function set_theme()
4658{
4659 CDIR="${HOME}/.config/rofi/"
4660 if [ ! -d "${CDIR}" ]
4661 then
4662 mkdir -p ${CDIR}
4663 fi
4664 if [ -f "${CDIR}/config" ]
4665 then
4666 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4667 fi
4668 echo "rofi.theme: ${1}" >> "${CDIR}/config"
4669
4670}
4671
4672if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4673 then
4674 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4675 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4676 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4677 else
4678 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4679 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4680 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4681fi
4682#+end_src
4683
4684*** wp.service
4685:PROPERTIES:
4686:header-args+: :tangle ~/.config/systemd/user/wp.service
4687:END:
4688
4689#+begin_src conf :tangle no
4690[Unit]
4691Description=wallpaper service
4692
4693[Service]
4694Type=oneshot
4695ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4696#+end_src
4697
4698*** wp.timer
4699:PROPERTIES:
4700:header-args+: :tangle ~/.config/systemd/user/wp.timer
4701:END:
4702
4703#+begin_src conf :tangle no
4704[Unit]
4705[Unit]
4706Description=wallpaper timer
4707
4708[Timer]
4709OnCalendar=07,21:00
4710Unit=wp.service
4711Persistent=true
4712
4713[Install]
4714WantedBy=timers.target
4715#+end_src
4716
69a6fe26
AB
4717** zathura-sync.sh
4718:PROPERTIES:
4719:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
4720:END:
4721
4722#+begin_src sh
4723pos="$1"
4724pdffile="$2"
4725zathura --synctex-forward "$pos" "$pdffile" || \
4726 (
4727 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
4728 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
4729#+end_src
33c5a5cd
AB
4730** Fun :)
4731
4732*** eat-em
4733:PROPERTIES:
4734:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
4735:END:
4736
4737#+begin_src sh
4738# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4739# [ESC] character in original post removed here.
4740
4741# ANSI Color -- use these variables to easily have different color
4742# and format output. Make sure to output the reset sequence after
4743# colors (f = foreground, b = background), and use the 'off'
4744# feature for anything you turn on.
4745
4746initializeANSI()
4747{
4748 esc="$(echo -en '\e')"
4749
4750 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
4751 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
4752 cyanf="${esc}[36m"; whitef="${esc}[37m"
4753
4754 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
4755 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
4756 cyanb="${esc}[46m"; whiteb="${esc}[47m"
4757
4758 boldon="${esc}[1m"; boldoff="${esc}[22m"
4759 italicson="${esc}[3m"; italicsoff="${esc}[23m"
4760 ulon="${esc}[4m"; uloff="${esc}[24m"
4761 invon="${esc}[7m"; invoff="${esc}[27m"
4762
4763 reset="${esc}[0m"
4764}
4765
4766# note in this first use that switching colors doesn't require a reset
4767# first - the new color overrides the old one.
4768
4769#clear
4770
4771initializeANSI
4772
4773cat << EOF
4774
4775 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
4776 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4777 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4778 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
4779 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
4780 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
4781
4782 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
4783 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4784 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4785 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
4786 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
4787 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
4788
4789EOF
4790#+end_src
4791
33c5a5cd
AB
4792*** invade-em
4793:PROPERTIES:
4794:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
4795:END:
4796
4797#+begin_src bash
4798#
4799# ANSI color scheme script featuring Space Invaders
4800#
4801# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4802# Modified by lolilolicon
4803#
4804
4805f=3 b=4
4806for j in f b; do
4807 for i in {0..7}; do
4808 printf -v $j$i %b "\e[${!j}${i}m"
4809 done
4810done
4811bld=$'\e[1m'
4812rst=$'\e[0m'
4813
4814cat << EOF
4815
4816 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4817 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4818 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
4819 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
4820
4821 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4822 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4823 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
4824 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
4825
4826
4827 $f7▌$rst
4828
4829 $f7▌$rst
4830
4831 $f7 ▄█▄ $rst
4832 $f7▄█████████▄$rst
4833 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
4834
4835EOF
4836#+end_src