[emacs] some slack-related enhancements
[~bandali/configs] / rc.org
CommitLineData
08146d0e
AB
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
b13e2dc1
AB
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
b13e2dc1
AB
17** bspwm
18
19*** bspwmrc
20:PROPERTIES:
21:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22:END:
23
fb52d1f9 24#+begin_src sh :tangle no
b13e2dc1
AB
25sxhkd &
26sh ~/.fehbg &
27xfce4-panel -d &
87af8efd 28compton &
b13e2dc1
AB
29sleep 0.5 && pasystray --notify=all &
30
31bspc monitor -d I II III IV V VI VII VIII IX X
32#bspc monitor eDP-1 -d I II III IV V
33#bspc monitor HDMI-1 -d VI VII VIII IX X
34
35#bspc config border_width 2
36#bspc config window_gap 8
37bspc config window_gap 0
38
39bspc config bottom_padding 26
40
41bspc config split_ratio 0.52
42bspc config borderless_monocle true
43bspc config gapless_monocle true
44bspc config click_to_focus button1
45bspc config directional_focus_tightness low
46
87af8efd 47#bspc rule -a Firefox desktop='^1' follow=on
b13e2dc1
AB
48bspc rule -a Nightly desktop='^1' follow=on
49bspc rule -a Emacs desktop='^2' state=tiled follow=on
50#bspc rule -a Chromium desktop='^4' follow=on
51bspc rule -a URxvt state=floating
52bspc rule -a URxvt:tiled state=tiled
53bspc rule -a Connman-gtk state=floating
54bspc rule -a Xfce4-panel state=floating
55bspc rule -a TelegramDesktop state=floating
56bspc rule -a Ec state=floating
57bspc rule -a Pavucontrol state=floating
58bspc rule -a Eog state=floating
59bspc rule -a Seahorse state=floating
60bspc rule -a mpv state=floating
61bspc rule -a Evince state=floating
62bspc rule -a Meld state=floating
63bspc rule -a Autokey-gtk state=floating
64bspc rule -a Mousepad state=floating
65bspc rule -a Wrapper-1.0 state=floating
66bspc rule -a File-roller state=floating
67bspc rule -a Gnome-disks state=floating
68bspc rule -a Termite state=floating
69bspc rule -a Termite:tiled state=tiled
70bspc rule -a Thunderbird:Calendar state=floating
71bspc rule -a Audacity state=floating
72bspc rule -a Proof state=floating # pvs x-show-proof
73bspc rule -a Nm-connection-editor state=floating
74bspc rule -a Wire state=floating
75bspc rule -a discord state=floating
76bspc rule -a X2goclient state=floating
77bspc rule -a SimpleScreenRecorder state=floating
78bspc rule -a Gimp state=floating
79bspc rule -a Wrapper-2.0 state=floating
80bspc rule -a Zathura state=tiled
81#+end_src
82
83*** sxhkdrc
84:PROPERTIES:
85:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86:END:
87
fb52d1f9 88#+begin_src conf :tangle no
b13e2dc1
AB
89#
90# wm independent hotkeys
91#
92
93# terminal emulator
94super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97#super + {_,shift} + Return
98# termite{_, --name=tiled}
99
100# program launcher
101super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104super + alt + space
105 xfce4-popup-whiskermenu
106
107# window finder
108super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111# password manager
112alt + space
113 rofi-pass
114
115# firefox
116#super + r
117# firefox
118
119# chromium
120#super + c
121# chromium -incognito
122
123# emacs
124super + e
125 emacs
126
127# make sxhkd reload its configuration files:
128super + Escape
129 pkill -USR1 -x sxhkd
130
131# volume {up,down}
132XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135# mute
136XF86AudioMute
137 pamixer --toggle-mute
138
373a060a
AB
139XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
b13e2dc1
AB
142# playback control
143XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146# lock the screen
147super + shift + q
148 light-locker-command -l
149
150# Toggle keyboard layout
151super + F7
152 toggle-layout
153
154# Toggle Xfce presentation mode
155XF86LaunchB
156 toggle-presentation-mode
157
158# monitor brightness
159XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162super + apostrophe
163 rofi-light
164
165# keyboard brightness
166#XF86KbdBrightness{Up,Down}
167# kbdlight {up,down}
168
72f329ba
AB
169XF86RotateWindows
170 toggle-tablet
171
b13e2dc1
AB
172#
173# bspwm hotkeys
174#
175
176# quit bspwm normally
177super + alt + Escape
178 bspc quit
179
180# close and kill
181super + {w,q}
182 bspc node -{c,k}
183
184# alternate between the tiled and monocle layout
185super + m
186 bspc desktop -l next
187
188# send the newest marked node to the newest preselected node
189super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192# swap the current node and the biggest node
193super + g
194 bspc node -s biggest
195
196#
197# state/flags
198#
199
200# set the window state
201super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204# set the node flags
205super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208#
209# focus/swap
210#
211
212# focus the node in the given direction
213super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216# focus the node for the given path jump
217super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220# focus the next/previous node in the current desktop
221super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224# focus the next/previous desktop in the current monitor
225super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228# send to next/prev desktop
229super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232# focus the last node/desktop
233super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236# focus the older or newer node in the focus history
237super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242# focus or send to the given desktop
243super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246#
247# preselect
248#
249
250# preselect the direction
251super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254# preselect the ratio
255super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258# cancel the preselection for the focused node
259super + ctrl + space
260 bspc node -p cancel
261
262# cancel the preselection for the focused desktop
263super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266#
267# move/resize
268#
269
270# expand a window by moving one of its side outward
271super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274# contract a window by moving one of its side inward
275super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278# move a floating window
279super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282#alt + bracket{left,right}
283# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284#+end_src
285
286** compton
287:PROPERTIES:
288:header-args+: :tangle ~/.config/compton.conf
289:END:
290
fb52d1f9 291#+begin_src conf :tangle no
b13e2dc1
AB
292# Shadow
293shadow = false; # Enabled client-side shadows on windows.
294no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295no-dnd-shadow = true; # Don't draw shadows on DND windows.
296clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298shadow-radius = 5; # The blur radius for shadows. (default 12)
299shadow-offset-x = -5; # The left offset for shadows. (default -15)
300shadow-offset-y = -5; # The top offset for shadows. (default -15)
301# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306# shadow-exclude = "n:e:Notification";
307#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311# Opacity
312menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323# blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326# blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332# Fading
333fading = false; # Fade windows during opacity changes.
334fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338fade-exclude = [ ]; # Exclude conditions for fading.
339
340# Other
341backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355dbe = false; # Enable DBE painting mode. Rarely needed.
356paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368# GLX backend # GLX backend fine-tune options. See man page for more info.
369glx-no-stencil = true; # Recommended.
370glx-copy-from-front = false; # Useful with --glx-swap-method,
371# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372# glx-no-rebind-pixmap = true; # Recommended if it works.
373glx-no-rebind-pixmap = true; # Recommended if it works.
374#glx-swap-method = "4"; # See man page.
375glx-swap-method = "4"; # See man page.
376
377# Window type settings
378wintypes:
379{
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389};
390#+end_src
391
05ab13aa
AB
392** Dunst
393:PROPERTIES:
394:header-args+: :tangle ~/.config/dunst/dunstrc
395:END:
396
397#+begin_src conf
398[global]
399#font = Ubuntu Mono 10.5
400font = Inconsolata 11
401
402# Path to default icons.
403icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405icon_position = left
406# <b>bold</b>
407# <i>italic</i>
408# <s>strikethrough<s/>
409# <u>underline</u>
410markup = full
411# The format of the message. Possible variables are:
412# %a appname
413# %s summary
414# %b body
415# %i iconname (including its path)
416# %I iconname (without its path)
417# %p progress value if set ([ 0%] to [100%]) or nothing
418# Markup is allowed
419format = "<b>%s</b>\n%b"
420# Sort messages by urgency
421sort = yes
422# Show how many messages are currently hidden (because of geometry)
423indicate_hiddenl= no
424# Alignment of message text.
425# Possible values are "left", "center" and "right"
426alignment = center
427# The frequency with wich text that is longer than the notification
428# window allows bounces back and forth.
429# This option conflicts with 'word_wrap'.
430# Set to 0 to disable
431bounce_freq = 3
432# show age of message if message is older than show_age_threshold seconds.
433# set to -1 to disable
434show_age_threshold = -1
435# split notifications into multiple lines if they don't fit into geometry
436word_wrap = yes
437# ignore newlines '\n' in notifications
438ignore_newline = no
439# The geometry of the message window.
440# geometry [{width}]x{height}][+/-{x}+/-{y}]
441# The height is measured in number of notifications everything else in pixels. If the width
442# is omitted but the height is given ("-geometry x2"), the message window
443# expands over the whole screen (dmenu-like). If width is 0,
444# the window expands to the longest message displayed.
445# A positive x is measured from the left, a negative from the
446# right side of the screen. Y is measured from the top and down respectevly.
447# The width can be negative. In this case the actual width is the
448# screen width minus the width defined in within the geometry option.
449#geometry = "410x12-12+12"
450#geometry = "0x0-30-30"
451geometry = "260x12-30-30"
452# The transparency of the window. range: [0; 100]
453# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454transparency = 0
455# Don't remove messages, if the user is idle (no mouse or keyboard input)
456# for longer than idle_threshold seconds.
457# Set to 0 to disable.
458idle_threshold = 120
459# Which monitor should the notifications be displayed on.
460monitor = 0
461# Display notification on focused monitor. Possible modes are:
462# mouse: follow mouse pointer
463# keyboard: follow window with keyboard focus
464# none: don't follow anything
465#
466# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467# This should be the case for almost all modern windowmanagers.
468#
469# If this option is set to mouse or keyboard, the monitor option will be
470# ignored.
471follow = keyboard
472# should a notification popped up from history be sticky or
473# timeout as if it would normally do.
474sticky_history = yes
475# The height of a single line. If the height is smaller than the font height,
476# it will get raised to the font height.
477# This adds empty space above and under the text.
478line_height = 0
479
480show_indicators = yes
481
482# Draw a line of 'separatpr_height' pixel height between two notifications.
483# Set to 0 to disable
484separator_height = 3
485# padding between text and separator
486padding = 8
487# horizontal padding
488horizontal_padding = 8
489# Define a color for the separator.
490# possible values are:
491# * auto: dunst tries to find a color fitting to the background
492# * foreground: use the same color as the foreground
493# * frame: use the same color as the frame.
494# * anything else will be interpreted as a X color
495separator_color = foreground
496# print a notification on startup
497# This is mainly for error detection, since dbus (re-)starts dunst
498# automatically after a crash.
499startup_notification = false
500# dmenu path
501#dmenu = /usr/bin/dmenu -p dunst:
502dmenu = /usr/bin/rofi -dmenu -p dunst:
503# browser for opening urls in context menu
504browser = /usr/bin/firefox -new-tab
505[frame]
506width = 0
507color = "#377222"
508[shortcuts]
509# shortcuts are specified as [modifier+][modifier+]...key
510# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511# and 'mod4' (windows-key)
512# xev might be helpful to find names for keys
513# close notification
514close = ctrl+space
515# close all notifications
516close_all = ctrl+shift+space
517# redisplay last message(s)
518# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519history = ctrl+shift+h
520# context menu
521context = ctrl+shift+period
522[urgency_low]
523# IMPORTANT: colors have to be defined in quotation marks.
524# Otherwise the '#' and following would be interpreted as a comment.
525background = "#1d2a30"
526foreground = "#71c2af"
527timeout = 3
528[urgency_normal]
529background = "#1d2a30"
530foreground = "#71c2af"
531timeout = 0
532[urgency_critical]
533background = "#1d2a30"
534foreground = "#ff9982"
535timeout = 0
536
537# Every section that isn't one of the above is interpreted as a rules
538# to override settings for certain messages.
539# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540# and you can override the 'timeout', 'urgency', 'foreground', 'background'
541# and 'format'.
542# Shell-like globbing will get expanded.
543#
544# SCRIPTING
545# you can specify a script that gets run when the rule matches by setting
546# the 'script' option.
547# The script will be called as follows:
548# script appname summary body icon urgency
549# where urgency can be "LOW", "NORMAL" or "CRITICAL".
550#
551# NOTE: if you don't want a notification to be displayed, set the format to ""
552# NOTE: It might be helpful to run dunst -print in a terminal in order to find
553# fitting options for rules.
554#[espeak]
555# summary = "*"
556# script = dunst_espeak.sh
557#[script-test]
558# summary = "*script*"
559# script = dunst_test.sh
560#[ignore]
561## This notification will not be displayed
562# summary = "foobar"
563# format = ""
564#[signed_on]
565# appname = Pidgin
566# summary = "*signed on*"
567# urgency = low
568#
569#[signed_off]
570# appname = Pidgin
571# summary = *signed off*
572# urgency = low
573#
574#[says]
575# appname = Pidgin
576# summary = *says*
577# urgency = critical
578#
579#[twitter]
580# appname = Pidgin
581# summary = *twitter.com*
582# urgency = normal
583#
584[xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587#+end_src
588
589** Fontconfig
590:PROPERTIES:
45d84997 591:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
05ab13aa
AB
592:END:
593
594#+begin_src xml
595<?xml version="1.0"?>
596<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597<fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
75f8530e 628 <prefer>
05ab13aa 629 <family>Liberation Sans</family>
75f8530e 630 </prefer>
05ab13aa
AB
631</alias>
632</fontconfig>
633#+end_src
634
a106372e
AB
635** getmail
636
637*** getmailrc
638:PROPERTIES:
639:header-args+: :tangle ~/.getmail/getmailrc
640:END:
641
642#+begin_src conf
643[retriever]
644type = SimplePOP3SSLRetriever
645server = fencepost.gnu.org
b003853f 646username = bandali
a106372e
AB
647password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
648port = 995
649use_apop = True
650
651[destination]
652type = Maildir
653path = ~/mail/gnu/Inbox/
654
655[options]
656delete = True
657#+end_src
658
659*** getmail.service
660:PROPERTIES:
661:header-args+: :tangle ~/.config/systemd/user/getmail.service
662:END:
663
664#+begin_src conf :tangle no
665[Unit]
666Description=getmail service
667
668[Service]
669Type=oneshot
670ExecStart=/usr/bin/getmail
671StandardOutput=syslog
672StandardError=syslog
673#+end_src
674
675*** getmail.timer
676:PROPERTIES:
677:header-args+: :tangle ~/.config/systemd/user/getmail.timer
678:END:
679
680#+begin_src conf :tangle no
681[Unit]
682Description=getmail timer
683
684[Timer]
685OnCalendar=*:0/30
686Persistent=true
687Unit=getmail.service
688
689[Install]
690WantedBy=timers.target
691#+end_src
692
58cbbce2 693** Git
08146d0e
AB
694
695*** gitconfig
696:PROPERTIES:
697:header-args+: :tangle ~/.gitconfig
698:END:
699
700**** user
701#+begin_src conf
702[user]
703 name = Amin Bandali
05675ca4
AB
704 email = bandali@gnu.org
705 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
08146d0e
AB
706#+end_src
707
708**** signing
709#+begin_src conf
5c7c14c7
AB
710[commit]
711 gpgsign = true
08146d0e
AB
712# [format]
713# signoff = true
714#+end_src
715
716**** core
717#+begin_src conf
718[core]
719 autocrlf = input # CRLF -> LF on commit
720 editor = emacsclient -t
721 excludesfile = ~/.gitignore_global
722 pager = "less"
723#+end_src
724
725**** gpg
726#+begin_src conf
727[gpg]
728 program = gpg2
729#+end_src
730
731**** alias
732#+begin_src conf
733[alias]
734 git = !exec git # handle nested git calls, e.g. git git status
735 aliases = config --get-regexp '^alias\\.'
736 a = add
737 s = status
738 sl = status --long
739 c = checkout
740 cb = checkout -b
741 b = branch
742 r = rebase
743 p = pull
744 pr = pull --rebase
745 ps = push
746 psf = push --force
74ef10b0
AB
747 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
748 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
08146d0e
AB
749#+end_src
750
751**** color
752#+begin_src conf
753[color]
754 ui = auto
755[color "status"]
756 added = green bold
757 changed = red bold
758 untracked = red bold
759[color "branch"]
760 current = green bold
761 remote = magenta bold
762[color "diff"]
763 new = green bold
764 old = red bold
765#+end_src
766
767**** status
768#+begin_src conf
769[status]
770 # showUntrackedFiles = all
771 short=true
772 branch=true
773#+end_src
774
775**** github
776#+begin_src conf
777[github]
778 user = aminb
779#+end_src
780
5c7c14c7
AB
781**** send-email
782#+begin_src conf
783[sendemail]
b003853f 784 smtpuser = bandali
9e568495 785 smtpserver = fencepost.gnu.org
5c7c14c7
AB
786 smtpserverport = 587
787 smtpencryption = tls
788 annotate = yes
789#+end_src
790
08146d0e
AB
791*** gitignore
792:PROPERTIES:
793:header-args+: :tangle ~/.gitignore_global
794:END:
795
796#+begin_src conf
797*.orig
798*.py[co]
799*.sublime-workspace
800*~
801.DS_Store
802*.elc
803*-autoloads.el
804#+end_src
58cbbce2 805
a106372e
AB
806** GnuPG
807:PROPERTIES:
808:header-args+: :tangle ~/.gnupg/gpg-agent.conf
809:END:
810
811#+begin_src conf
812default-cache-ttl 43200
813max-cache-ttl 43200
814
815default-cache-ttl-ssh 10800
816max-cache-ttl-ssh 10800
817
818# pinentry-program /usr/bin/pinentry-qt
819#+end_src
820
821** GTK
822
823*** gtk-2.0
824:PROPERTIES:
825:header-args+: :tangle ~/.gtkrc-2.0
826:END:
827
828#+begin_src conf
829gtk-theme-name="Greybird"
830gtk-icon-theme-name="Paper"
831gtk-font-name="Ubuntu 10"
832gtk-menu-images=0
833# gtk-key-theme-name = "Emacs"
834#+end_src
835
836*** gtk-3.0
837:PROPERTIES:
838:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
839:END:
840
841#+begin_src conf :tangle no
842[Settings]
843gtk-icon-theme-name = Paper
844# gtk-theme-name = Adwaita
845
846gtk-theme-name = Greybird
847# gtk-theme-name = Arc-Darker
848# gtk-theme-name = Numix-ArchBlue
849
850gtk-font-name = Ubuntu 10
851# gtk-key-theme-name = Emacs
852#+end_src
853
a5547504
AB
854** [[https://github.com/Leinnan/i3gs][i3gs]]
855:PROPERTIES:
856:header-args+: :tangle ~/.config/i3gs/config
857:END:
858
6a056822 859#+begin_src conf :comments none :tangle no
a5547504
AB
860borders_width=0 0 2 0
861separator_width=10
862
be33ab1f
AB
863#[mpd]
864#preset=MPD
865#title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
866#borders_color=#7FDBFF
a5547504
AB
867
868[ram]
869preset=RAM
870title=<span weight='heavy' fgcolor='#3D9970'> </span>
871borders_color=#3D9970
872
be33ab1f
AB
873#[cpu]
874#preset=CPU
875#title=<span weight='heavy' fgcolor='#2ECC40'> </span>
876#borders_color=#2ECC40
a5547504 877
be33ab1f
AB
878#[hdd]
879#preset=HDD
880#title=<span weight='heavy' fgcolor='#01FF70'> </span>
881#borders_color=#01FF70
a5547504 882
4fc8d5d2
AB
883[volume]
884command=volume-info
885title=<span weight='heavy' fgcolor='#7FDBFF'></span>
886borders_color=#7FDBFF
887
a5547504
AB
888[battery]
889preset=BAT
683f2865 890command=battery-percentage-time
a5547504
AB
891title=<span weight='heavy' fgcolor='#39CCCC'> </span>
892borders_color=#39CCCC
893
894[wifi]
895preset=WIFI
896title=<span weight='heavy' fgcolor='#01FF70'> </span>
897borders_color=#01FF70
898
899[date]
900preset=DATE
ce79d14b 901command=date '+%-I:%M, %a %b %d '
a5547504
AB
902title=<span weight='heavy' fgcolor='#FFDC00'> </span>
903borders_color=#FFDC00
904separator_width=0
905#+end_src
6a056822
AB
906
907** i3status
908:PROPERTIES:
909:header-args+: :tangle ~/.config/i3status/config
910:END:
911
912#+begin_src conf :comments none
913# i3status configuration file.
914# see "man i3status" for documentation.
915
916# It is important that this file is edited as UTF-8.
917# The following line should contain a sharp s:
918# ß
919# If the above line is not correctly displayed, fix your editor first!
920
921general {
922 colors = true
923 interval = 5
9455bb8f 924 output_format = "i3bar"
6a056822
AB
925}
926
e939ef1a 927# order += "ipv6"
6a056822 928order += "disk /"
e939ef1a 929order += "disk /data"
6a056822 930order += "wireless _first_"
03cbbb1a 931order += "ethernet _first_"
e939ef1a 932order += "battery 0"
25bd9e84 933order += "volume master"
6a056822
AB
934order += "load"
935order += "tztime local"
936
937wireless _first_ {
e939ef1a 938 format_up = "W:%quality %essid %ip"
6a056822
AB
939 format_down = "W: down"
940}
941
03cbbb1a
AB
942ethernet _first_ {
943 # if you use %speed, i3status requires root privileges
944 format_up = "E: %ip (%speed)"
945 format_down = "E: down"
946}
e939ef1a
AB
947
948battery 0 {
949 format = "%status %percentage %remaining (%consumption)"
950 path = "/sys/class/power_supply/BAT%d/uevent"
25bd9e84
AB
951 low_threshold = "10"
952 threshold_type = "percentage"
953 last_full_capacity = true
e939ef1a
AB
954 integer_battery_capacity = true
955 hide_seconds = true
6a056822
AB
956}
957
958tztime local {
e939ef1a 959 format = "%-I:%M%P %a %b %d"
6a056822
AB
960}
961
25bd9e84
AB
962volume master {
963 format = "♪ %volume"
964 format_muted = "🔇 %volume"
965 device = "pulse"
966}
967
6a056822
AB
968load {
969 format = "%1min"
970}
971
972disk "/" {
e939ef1a
AB
973 format = "/ %avail"
974}
975
976disk "/data" {
977 format = "/data %avail"
6a056822
AB
978}
979#+end_src
980
be76c6db
AB
981** isync
982
983*** mbsyncrc
984:PROPERTIES:
985:header-args+: :tangle ~/.mbsyncrc
986:END:
987
988#+begin_src conf
989# Global defaults
990CopyArrivalDate yes
991
992######
993IMAPAccount amin
994Host nix.aminb.org
995User amin@aminb.org
996PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
997SSLType IMAPS
998
999IMAPStore amin-remote
1000Account amin
1001
1002MaildirStore amin-local
1003Path ~/mail/amin/
1004Inbox ~/mail/amin/Inbox
1005SubFolders Verbatim
1006
1007Channel amin
1008Master :amin-remote:
1009Slave :amin-local:
1010Patterns * !dovecot*
1011Create Both
1012SyncState *
1013
1014######
1015IMAPAccount uwaterloo
1016Host connect.uwaterloo.ca
59027673 1017User abandali
be76c6db
AB
1018PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1019SSLType IMAPS
1020
1021IMAPStore uwaterloo-remote
1022Account uwaterloo
1023
1024MaildirStore uwaterloo-local
1025Path ~/mail/uwaterloo/
1026Inbox ~/mail/uwaterloo/Inbox
1027SubFolders Verbatim
1028
1029Channel uwaterloo
1030Master :uwaterloo-remote:
1031Slave :uwaterloo-local:
1032Patterns * !dovecot*
1033Create Both
1034SyncState *
1035#+end_src
1036
1037*** mbsync.service
1038:PROPERTIES:
1039:header-args+: :tangle ~/.config/systemd/user/mbsync.service
1040:END:
1041
1042#+begin_src conf :tangle no
1043[Unit]
1044Description=mbsync service
1045
1046[Service]
1047Type=oneshot
1048ExecStart=/usr/bin/mbsync -Va
1049StandardOutput=syslog
1050StandardError=syslog
1051#+end_src
1052
1053*** mbsync.timer
1054:PROPERTIES:
1055:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1056:END:
1057
1058#+begin_src conf :tangle no
1059[Unit]
1060Description=mbsync timer
1061
1062[Timer]
1063OnCalendar=*:0/15
1064Persistent=true
1065Unit=mbsync.service
1066
1067[Install]
1068WantedBy=timers.target
1069#+end_src
1070
a106372e
AB
1071** Latexmk
1072:PROPERTIES:
1073:header-args+: :tangle ~/.latexmkrc
1074:END:
1075
1076#+begin_src conf
1077$pdf_previewer = "start zathura %O %S";
1078$clean_ext = "aux out";
1079
1080# $pdf_update_method = 4;
1081# $pdf_update_command = "zathura %O %S";
1082
1083# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1084# by Ctrl+click in the PDF.
1085# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1086# editor.
1087# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1088#+end_src
1089
1090** libinput
1091
1092Improve XPS 15 9560's touchpad experience.
1093
1094# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1095#+begin_src conf :tangle no
1096Section "InputClass"
1097 Identifier "libinput touchpad catchall"
1098 Driver "libinput"
1099 MatchIsTouchpad "on"
1100 Option "ClickMethod" "clickfinger"
1101 Option "NaturalScrolling" "true"
1102 Option "Tapping" "on"
1103 Option "TappingButtonMap" "lrm"
1104EndSection
1105#+end_src
1106
59027673
AB
1107** mpd
1108:PROPERTIES:
1109:header-args+: :tangle ~/.config/mpd/mpd.conf
1110:END:
1111
1112#+begin_src conf
1113# An example configuration file for MPD.
1114# Read the user manual for documentation: http://www.musicpd.org/doc/user/
1115
1116
1117# Files and directories #######################################################
1118#
1119# This setting controls the top directory which MPD will search to discover the
1120# available audio files and add them to the daemon's online database. This
1121# setting defaults to the XDG directory, otherwise the music directory will be
1122# be disabled and audio files will only be accepted over ipc socket (using
1123# file:// protocol) or streaming files over an accepted protocol.
1124#
1125music_directory "~/usr/music"
1126#
1127# This setting sets the MPD internal playlist directory. The purpose of this
1128# directory is storage for playlists created by MPD. The server will use
1129# playlist files not created by the server but only if they are in the MPD
1130# format. This setting defaults to playlist saving being disabled.
1131#
1132playlist_directory "~/.mpd/playlists"
1133#
1134# This setting sets the location of the MPD database. This file is used to
1135# load the database at server start up and store the database while the
1136# server is not up. This setting defaults to disabled which will allow
1137# MPD to accept files over ipc socket (using file:// protocol) or streaming
1138# files over an accepted protocol.
1139#
1140db_file "~/.mpd/database"
1141#
1142# These settings are the locations for the daemon log files for the daemon.
1143# These logs are great for troubleshooting, depending on your log_level
1144# settings.
1145#
1146# The special value "syslog" makes MPD use the local syslog daemon. This
1147# setting defaults to logging to syslog, otherwise logging is disabled.
1148#
1149log_file "~/.mpd/log"
1150#
1151# This setting sets the location of the file which stores the process ID
1152# for use of mpd --kill and some init scripts. This setting is disabled by
1153# default and the pid file will not be stored.
1154#
1155pid_file "~/.mpd/pid"
1156#
1157# This setting sets the location of the file which contains information about
1158# most variables to get MPD back into the same general shape it was in before
1159# it was brought down. This setting is disabled by default and the server
1160# state will be reset on server start up.
1161#
1162state_file "~/.mpd/state"
1163#
1164# The location of the sticker database. This is a database which
1165# manages dynamic information attached to songs.
1166#
1167sticker_file "~/.mpd/sticker.sql"
1168#
1169###############################################################################
1170
1171
1172# General music daemon options ################################################
1173#
1174# This setting specifies the user that MPD will run as. MPD should never run as
1175# root and you may use this setting to make MPD change its user ID after
1176# initialization. This setting is disabled by default and MPD is run as the
1177# current user.
1178#
1179#user "nobody"
1180#
1181# This setting specifies the group that MPD will run as. If not specified
1182# primary group of user specified with "user" setting will be used (if set).
1183# This is useful if MPD needs to be a member of group such as "audio" to
1184# have permission to use sound card.
1185#
1186#group "nogroup"
1187#
1188# This setting sets the address for the daemon to listen on. Careful attention
1189# should be paid if this is assigned to anything other then the default, any.
1190# This setting can deny access to control of the daemon. Not effective if
1191# systemd socket activiation is in use.
1192#
1193# For network
1194#bind_to_address "any"
1195#
1196# And for Unix Socket
1197#bind_to_address "~/.mpd/socket"
1198#
1199# This setting is the TCP port that is desired for the daemon to get assigned
1200# to.
1201#
1202#port "6600"
1203#
1204# This setting controls the type of information which is logged. Available
1205# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1206# argument is recommended for troubleshooting, though can quickly stretch
1207# available resources on limited hardware storage.
1208#
1209#log_level "default"
1210#
1211# If you have a problem with your MP3s ending abruptly it is recommended that
1212# you set this argument to "no" to attempt to fix the problem. If this solves
1213# the problem, it is highly recommended to fix the MP3 files with vbrfix
1214# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1215# point gapless MP3 playback can be enabled.
1216#
1217#gapless_mp3_playback "yes"
1218#
1219# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1220# of starting playback after startup.
1221#
1222#restore_paused "no"
1223#
1224# This setting enables MPD to create playlists in a format usable by other
1225# music players.
1226#
1227#save_absolute_paths_in_playlists "no"
1228#
1229# This setting defines a list of tag types that will be extracted during the
1230# audio file discovery process. The complete list of possible values can be
1231# found in the user manual.
1232#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1233#
1234# This setting enables automatic update of MPD's database when files in
1235# music_directory are changed.
1236#
1237#auto_update "yes"
1238#
1239# Limit the depth of the directories being watched, 0 means only watch
1240# the music directory itself. There is no limit by default.
1241#
1242#auto_update_depth "3"
1243#
1244###############################################################################
1245
1246
1247# Symbolic link behavior ######################################################
1248#
1249# If this setting is set to "yes", MPD will discover audio files by following
1250# symbolic links outside of the configured music_directory.
1251#
1252#follow_outside_symlinks "yes"
1253#
1254# If this setting is set to "yes", MPD will discover audio files by following
1255# symbolic links inside of the configured music_directory.
1256#
1257#follow_inside_symlinks "yes"
1258#
1259###############################################################################
1260
1261
1262# Zeroconf / Avahi Service Discovery ##########################################
1263#
1264# If this setting is set to "yes", service information will be published with
1265# Zeroconf / Avahi.
1266#
1267#zeroconf_enabled "yes"
1268#
1269# The argument to this setting will be the Zeroconf / Avahi unique name for
1270# this MPD server on the network.
1271#
1272#zeroconf_name "Music Player"
1273#
1274###############################################################################
1275
1276
1277# Permissions #################################################################
1278#
1279# If this setting is set, MPD will require password authorization. The password
1280# setting can be specified multiple times for different password profiles.
1281#
1282#password "password@read,add,control,admin"
1283#
1284# This setting specifies the permissions a user has who has not yet logged in.
1285#
1286#default_permissions "read,add,control,admin"
1287#
1288###############################################################################
1289
1290
1291# Database #######################################################################
1292#
1293
1294#database {
1295# plugin "proxy"
1296# host "other.mpd.host"
1297# port "6600"
1298#}
1299
1300# Input #######################################################################
1301#
1302
1303input {
1304 plugin "curl"
1305# proxy "proxy.isp.com:8080"
1306# proxy_user "user"
1307# proxy_password "password"
1308}
1309
1310#
1311###############################################################################
1312
1313# Audio Output ################################################################
1314#
1315
1316audio_output {
1317 type "pulse"
1318 name "pulse audio"
1319}
1320
1321audio_output {
1322 type "fifo"
1323 name "my_fifo"
1324 path "/tmp/mpd.fifo"
1325 format "44100:16:2"
1326}
1327
1328# MPD supports various audio output types, as well as playing through multiple
1329# audio outputs at the same time, through multiple audio_output settings
1330# blocks. Setting this block is optional, though the server will only attempt
1331# autodetection for one sound card.
1332#
1333# An example of an ALSA output:
1334#
1335#audio_output {
1336# type "alsa"
1337# name "My ALSA Device"
1338## device "hw:0,0" # optional
1339## mixer_type "hardware" # optional
1340## mixer_device "default" # optional
1341## mixer_control "PCM" # optional
1342## mixer_index "0" # optional
1343#}
1344#
1345# An example of an OSS output:
1346#
1347#audio_output {
1348# type "oss"
1349# name "My OSS Device"
1350## device "/dev/dsp" # optional
1351## mixer_type "hardware" # optional
1352## mixer_device "/dev/mixer" # optional
1353## mixer_control "PCM" # optional
1354#}
1355#
1356# An example of a shout output (for streaming to Icecast):
1357#
1358#audio_output {
1359# type "shout"
1360# encoder "vorbis" # optional
1361# name "My Shout Stream"
1362# host "localhost"
1363# port "8000"
1364# mount "/mpd.ogg"
1365# password "hackme"
1366# quality "5.0"
1367# bitrate "128"
1368# format "44100:16:1"
1369## protocol "icecast2" # optional
1370## user "source" # optional
1371## description "My Stream Description" # optional
1372## url "http://example.com" # optional
1373## genre "jazz" # optional
1374## public "no" # optional
1375## timeout "2" # optional
1376## mixer_type "software" # optional
1377#}
1378#
1379# An example of a recorder output:
1380#
1381#audio_output {
1382# type "recorder"
1383# name "My recorder"
1384# encoder "vorbis" # optional, vorbis or lame
1385# path "/var/lib/mpd/recorder/mpd.ogg"
1386## quality "5.0" # do not define if bitrate is defined
1387# bitrate "128" # do not define if quality is defined
1388# format "44100:16:1"
1389#}
1390#
1391# An example of a httpd output (built-in HTTP streaming server):
1392#
1393#audio_output {
1394# type "httpd"
1395# name "My HTTP Stream"
1396# encoder "vorbis" # optional, vorbis or lame
1397# port "8000"
1398# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1399## quality "5.0" # do not define if bitrate is defined
1400# bitrate "128" # do not define if quality is defined
1401# format "44100:16:1"
1402# max_clients "0" # optional 0=no limit
1403#}
1404#
1405# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1406#
1407#audio_output {
1408# type "pulse"
1409# name "My Pulse Output"
1410## server "remote_server" # optional
1411## sink "remote_server_sink" # optional
1412#}
1413#
1414# An example of a winmm output (Windows multimedia API).
1415#
1416#audio_output {
1417# type "winmm"
1418# name "My WinMM output"
1419## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1420# or
1421## device "0" # optional
1422## mixer_type "hardware" # optional
1423#}
1424#
1425# An example of an openal output.
1426#
1427#audio_output {
1428# type "openal"
1429# name "My OpenAL output"
1430## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1431#}
1432#
1433# An example of an sndio output.
1434#
1435#audio_output {
1436# type "sndio"
1437# name "sndio output"
1438# mixer_type "software"
1439#}
1440#
1441# An example of an OS X output:
1442#
1443#audio_output {
1444# type "osx"
1445# name "My OS X Device"
1446## device "Built-in Output" # optional
1447## channel_map "-1,-1,0,1" # optional
1448#}
1449#
1450## Example "pipe" output:
1451#
1452#audio_output {
1453# type "pipe"
1454# name "my pipe"
1455# command "aplay -f cd 2>/dev/null"
1456## Or if you're want to use AudioCompress
1457# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1458## Or to send raw PCM stream through PCM:
1459# command "nc example.org 8765"
1460# format "44100:16:2"
1461#}
1462#
1463## An example of a null output (for no audio output):
1464#
1465#audio_output {
1466# type "null"
1467# name "My Null Output"
1468# mixer_type "none" # optional
1469#}
1470#
1471###############################################################################
1472
1473
1474# Normalization automatic volume adjustments ##################################
1475#
1476# This setting specifies the type of ReplayGain to use. This setting can have
1477# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1478# chooses between "track" and "album" depending on the current state of
1479# random playback. If random playback is enabled then "track" mode is used.
1480# See <http://www.replaygain.org> for more details about ReplayGain.
1481# This setting is off by default.
1482#
1483#replaygain "album"
1484#
1485# This setting sets the pre-amp used for files that have ReplayGain tags. By
1486# default this setting is disabled.
1487#
1488#replaygain_preamp "0"
1489#
1490# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1491# By default this setting is disabled.
1492#
1493#replaygain_missing_preamp "0"
1494#
1495# This setting enables or disables ReplayGain limiting.
1496# MPD calculates actual amplification based on the ReplayGain tags
1497# and replaygain_preamp / replaygain_missing_preamp setting.
1498# If replaygain_limit is enabled MPD will never amplify audio signal
1499# above its original level. If replaygain_limit is disabled such amplification
1500# might occur. By default this setting is enabled.
1501#
1502#replaygain_limit "yes"
1503#
1504# This setting enables on-the-fly normalization volume adjustment. This will
1505# result in the volume of all playing audio to be adjusted so the output has
1506# equal "loudness". This setting is disabled by default.
1507#
1508#volume_normalization "no"
1509#
1510###############################################################################
1511
1512# Character Encoding ##########################################################
1513#
1514# If file or directory names do not display correctly for your locale then you
1515# may need to modify this setting.
1516#
1517#filesystem_charset "UTF-8"
1518#
1519###############################################################################
1520#+end_src
1521
1522** msmtp
1523:PROPERTIES:
1524:header-args+: :tangle ~/.msmtprc
1525:END:
1526
1527#+begin_src conf
1528# Set default values for all following accounts.
1529defaults
1530port 587
1531tls on
1532auth on
1533#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1534logfile ~/.msmtp.log
1535
1536# aminb
1537account aminb
1538host nix.aminb.org
55879085
AB
1539# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1540tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
59027673
AB
1541tls_starttls on
1542from amin@aminb.org
1543user amin@aminb.org
1544passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1545
1546# gnu
1547account gnu
1548host fencepost.gnu.org
1e55aaa3 1549# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
05675ca4 1550tls_fingerprint 34:60:91:B5:71:5B:76:87:50:F3:83:13:26:0F:EE:75:42:83:93:9A:E2:AF:1E:87:72:02:C9:61:CE:28:1B:8E
59027673 1551tls_starttls on
b003853f
AB
1552from bandali@gnu.org
1553user bandali
59027673
AB
1554passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1555
b003853f
AB
1556# gnu (old)
1557account gnu-aminb : gnu
1558from aminb@gnu.org
1559account gnu-amin : gnu
1560from amin@gnu.org
1561account gnu-mab : gnu
1562from mab@gnu.org
9e568495 1563
59027673
AB
1564# uwaterloo
1565account uwaterloo
1566host connect.uwaterloo.ca
1567tls_starttls on
1568from abandali@uwaterloo.ca
1569user abandali
1570passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1571tls_trust_file /etc/ssl/certs/ca-certificates.crt
1572
59027673
AB
1573# Set a default account
1574account default : aminb
1575#+end_src
1576
1577** ncmpcpp
1578
1579*** config
1580:PROPERTIES:
1581:header-args+: :tangle ~/.ncmpcpp/config
1582:END:
1583
1584#+begin_src conf :tangle no
1585##############################################################
1586## This is the example configuration file. Copy it to ##
1587## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1588## and set up your preferences. ##
1589##############################################################
1590#
1591##### directories ######
1592##
1593## Directory for storing ncmpcpp related files.
1594## Changing it is useful if you want to store
1595## everything somewhere else and provide command
1596## line setting for alternative location to config
1597## file which defines that while launching ncmpcpp.
1598##
1599#
1600ncmpcpp_directory = ~/.ncmpcpp
1601#
1602##
1603## Directory for storing downloaded lyrics. It
1604## defaults to ~/.lyrics since other MPD clients
1605## (eg. ncmpc) also use that location.
1606##
1607#
1608#lyrics_directory = ~/.lyrics
1609#
1610##### connection settings #####
1611#
1612#mpd_host = localhost
1613#
1614#mpd_port = 6600
1615#
1616#mpd_connection_timeout = 5
1617#
1618## Needed for tag editor and file operations to work.
1619##
1620mpd_music_dir = ~/usr/music
1621#
1622#mpd_crossfade_time = 5
1623#
1624##### music visualizer #####
1625##
1626## Note: In order to make music visualizer work you'll
1627## need to use mpd fifo output, whose format parameter
1628## has to be set to 44100:16:1 for mono visualization
1629## or 44100:16:2 for stereo visualization. Example
1630## configuration (it has to be put into mpd.conf):
1631##
1632## audio_output {
1633## type "fifo"
1634## name "Visualizer feed"
1635## path "/tmp/mpd.fifo"
1636## format "44100:16:2"
1637## }
1638##
1639#
1640visualizer_fifo_path = /tmp/mpd.fifo
1641#
1642##
1643## Note: Below parameter is needed for ncmpcpp
1644## to determine which output provides data for
1645## visualizer and thus allow syncing between
1646## visualization and sound as currently there
1647## are some problems with it.
1648##
1649#
1650visualizer_output_name = my fifo
1651#
1652##
1653## If you set format to 44100:16:2, make it 'yes'.
1654##
1655visualizer_in_stereo = yes
1656#
1657##
1658## Multiply received samples by given value. Very
1659## useful for proper visualization of quiet music.
1660##
1661#visualizer_sample_multiplier = 1
1662#
1663##
1664## Note: Below parameter defines how often ncmpcpp
1665## has to "synchronize" visualizer and audio outputs.
1666## 30 seconds is optimal value, but if you experience
1667## synchronization problems, set it to lower value.
1668## Keep in mind that sane values start with >=10.
1669##
1670#
1671visualizer_sync_interval = 30
1672#
1673##
1674## Note: To enable spectrum frequency visualization
1675## you need to compile ncmpcpp with fftw3 support.
1676##
1677#
1678## Available values: spectrum, wave, wave_filled, ellipse.
1679##
1680visualizer_type = spectrum
1681#
1682#visualizer_look = ●▮
1683visualizer_look = "●•"
1684#
1685#visualizer_color = blue, cyan, green, yellow, magenta, red
1686#
1687## Alternative subset of 256 colors for terminals that support it.
1688##
1689#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1690#
1691##### system encoding #####
1692##
1693## ncmpcpp should detect your charset encoding
1694## but if it failed to do so, you can specify
1695## charset encoding you are using here.
1696##
1697## Note: You can see whether your ncmpcpp build
1698## supports charset detection by checking output
1699## of `ncmpcpp --version`.
1700##
1701## Note: Since MPD uses UTF-8 by default, setting
1702## this option makes sense only if your encoding
1703## is different.
1704##
1705#
1706#system_encoding = ""
1707#
1708##### delays #####
1709#
1710## Time of inactivity (in seconds) after playlist
1711## highlighting will be disabled (0 = always on).
1712##
1713#playlist_disable_highlight_delay = 5
1714#
1715## Defines how long messages are supposed to be visible.
1716##
1717#message_delay_time = 5
1718#
1719##### song format #####
1720##
1721## For a song format you can use:
1722##
1723## %l - length
1724## %f - filename
1725## %D - directory
1726## %a - artist
1727## %A - album artist
1728## %t - title
1729## %b - album
1730## %y - date
1731## %n - track number (01/12 -> 01)
1732## %N - full track info (01/12 -> 01/12)
1733## %g - genre
1734## %c - composer
1735## %p - performer
1736## %d - disc
1737## %C - comment
1738## %P - priority
1739## $R - begin right alignment
1740##
1741## If you want to make sure that a part of the format is displayed
1742## only when certain tags are present, you can archieve it by
1743## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1744## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1745## It is also possible to define a list of alternatives by providing
1746## several groups and separating them with '|', e.g. '{%t}|{%f}'
1747## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1748## present.
1749##
1750## Note: If you want to set limit on maximal length of a tag, just
1751## put the appropriate number between % and character that defines
1752## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1753##
1754## In addition, formats support markers used for text attributes.
1755## They are followed by character '$'. After that you can put:
1756##
1757## - 0 - default window color (discards all other colors)
1758## - 1 - black
1759## - 2 - red
1760## - 3 - green
1761## - 4 - yellow
1762## - 5 - blue
1763## - 6 - magenta
1764## - 7 - cyan
1765## - 8 - white
1766## - 9 - end of current color
1767## - b - bold text
1768## - u - underline text
1769## - r - reverse colors
1770## - a - use alternative character set
1771##
1772## If you don't want to use a non-color attribute anymore, just put it
1773## again, but this time insert character '/' between '$' and attribute
1774## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1775## or filename with reversed colors.
1776##
1777## If you want to use 256 colors and/or background colors in formats
1778## (the naming scheme is described below in section about color
1779## definitions), it can be done with the syntax $(COLOR), e.g. to set
1780## the artist tag to one of the non-standard colors and make it have
1781## yellow background, you need to write $(197_yellow)%a$(end). Note
1782## that for standard colors this is interchangable with attributes
1783## listed above.
1784##
1785## Note: colors can be nested.
1786##
1787#
1788#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1789#
1790#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1791#
1792#song_library_format = {%n - }{%t}|{%f}
1793#
1794#
1795#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1796#
1797#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1798#
1799#now_playing_prefix = $b
1800#
1801#now_playing_suffix = $/b
1802#
1803#browser_playlist_prefix = "$2playlist$9 "
1804#
1805#selected_item_prefix = $6
1806#
1807#selected_item_suffix = $9
1808#
1809#modified_item_prefix = $3> $9
1810#
1811##
1812## Note: attributes are not supported for the following variables.
1813##
1814#song_window_title_format = {%a - }{%t}|{%f}
1815##
1816## Note: Below variables are used for sorting songs in browser.
1817## The sort mode determines how songs are sorted, and can be used
1818## in combination with a sort format to specify a custom sorting format.
1819## Available values for browser_sort_mode are "name", "mtime", "format"
1820## and "noop".
1821##
1822#
1823#browser_sort_mode = name
1824#
1825#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1826#
1827##### columns settings #####
1828##
1829## syntax of song columns list format is "column column etc."
1830##
1831## - syntax for each column is:
1832##
1833## (width of the column)[color of the column]{displayed tag}
1834##
1835## Note: Width is by default in %, if you want a column to
1836## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1837## will be the column that take 10% of screen (so the real width
1838## will depend on actual screen size), whereas (10f)[white]{a}
1839## will take 10 terminal cells, no matter how wide the screen is.
1840##
1841## - color is optional (if you want the default one,
1842## leave the field empty).
1843##
1844## Note: You can give a column additional attributes by putting appropriate
1845## character after displayed tag character. Available attributes are:
1846##
1847## - r - column will be right aligned
1848## - E - if tag is empty, empty tag marker won't be displayed
1849##
1850## You can also:
1851##
1852## - give a column custom name by putting it after attributes,
1853## separated with character ':', e.g. {lr:Length} gives you
1854## right aligned column of lengths named "Length".
1855##
1856## - define sequence of tags, that have to be displayed in case
1857## predecessor is empty in a way similar to the one in classic
1858## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1859## creates column named "Owner" that tries to display artist
1860## tag and then composer and performer if previous ones are
1861## not available.
1862##
1863#
1864#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1865#
1866##### various settings #####
1867#
1868##
1869## Note: Custom command that will be executed each
1870## time song changes. Useful for notifications etc.
1871##
1872#execute_on_song_change = ""
1873#
1874#playlist_show_mpd_host = no
1875#
1876#playlist_show_remaining_time = no
1877#
1878#playlist_shorten_total_times = no
1879#
1880#playlist_separate_albums = no
1881#
1882##
1883## Note: Possible display modes: classic, columns.
1884##
1885#playlist_display_mode = columns
1886#
1887#browser_display_mode = classic
1888#
1889#search_engine_display_mode = classic
1890#
1891#playlist_editor_display_mode = classic
1892#
1893#discard_colors_if_item_is_selected = yes
1894#
1895#incremental_seeking = yes
1896#
1897#seek_time = 1
1898#
1899#volume_change_step = 2
1900#
1901#autocenter_mode = no
1902#
1903#centered_cursor = no
1904#
1905##
1906## Note: You can specify third character which will
1907## be used to build 'empty' part of progressbar.
1908##
1909#progressbar_look = =>
1910progressbar_look = "─╼╶"
1911#progressbar_look = "─⊙╶"
1912#
1913#progressbar_boldness = yes
1914#
1915## Available values: database, playlist.
1916##
1917#default_place_to_search_in = database
1918#
1919## Available values: classic, alternative.
1920##
1921#user_interface = classic
1922#
1923#data_fetching_delay = yes
1924#
1925## Available values: artist, album_artist, date, genre, composer, performer.
1926##
1927#media_library_primary_tag = artist
1928#
1929## Available values: wrapped, normal.
1930##
1931#default_find_mode = wrapped
1932#
1933#default_tag_editor_pattern = %n - %t
1934#
1935#header_visibility = yes
1936#
1937#statusbar_visibility = yes
1938#
1939#titles_visibility = yes
1940#
1941#header_text_scrolling = yes
1942#
1943#cyclic_scrolling = no
1944#
1945#lines_scrolled = 2
1946#
1947#follow_now_playing_lyrics = no
1948#
1949#fetch_lyrics_for_current_song_in_background = no
1950#
1951#store_lyrics_in_song_dir = no
1952#
1953#generate_win32_compatible_filenames = yes
1954#
1955#allow_for_physical_item_deletion = no
1956#
1957##
1958## Note: If you set this variable, ncmpcpp will try to
1959## get info from last.fm in language you set and if it
1960## fails, it will fall back to english. Otherwise it will
1961## use english the first time.
1962##
1963## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1964##
1965#lastfm_preferred_language = en
1966#
1967#show_hidden_files_in_local_browser = no
1968#
1969##
1970## How shall screen switcher work?
1971##
1972## - "previous" - switch between the current and previous screen.
1973## - "screen1,...,screenN" - switch between given sequence of screens.
1974##
1975## Screens available for use: help, playlist, browser, search_engine,
1976## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1977##
1978#screen_switcher_mode = playlist, browser
1979#
1980##
1981## Note: You can define startup screen
1982## by choosing screen from the list above.
1983##
1984#startup_screen = playlist
1985#
1986##
1987## Note: You can define startup slave screen
1988## by choosing screen from the list above or
1989## an empty value for no slave screen.
1990##
1991#startup_slave_screen = ""
1992#
1993#startup_slave_screen_focus = no
1994#
1995##
1996## Default width of locked screen (in %).
1997## Acceptable values are from 20 to 80.
1998##
1999#
2000#locked_screen_width_part = 50
2001#
2002#ask_for_locked_screen_width_part = yes
2003#
2004#jump_to_now_playing_song_at_start = yes
2005#
2006#ask_before_clearing_playlists = yes
2007#
2008#clock_display_seconds = no
2009#
2010#display_volume_level = yes
2011#
2012#display_bitrate = no
2013#
2014#display_remaining_time = no
2015#
2016## Available values: none, basic, extended, perl.
2017##
2018#regular_expressions = perl
2019#
2020##
2021## Note: If below is enabled, ncmpcpp will ignore leading
2022## "The" word while sorting items in browser, tags in
2023## media library, etc.
2024##
2025#ignore_leading_the = no
2026#
2027#block_search_constraints_change_if_items_found = yes
2028#
2029#mouse_support = yes
2030#
2031#mouse_list_scroll_whole_page = yes
2032#
2033#empty_tag_marker = <empty>
2034#
2035#tags_separator = " | "
2036#
2037#tag_editor_extended_numeration = no
2038#
2039#media_library_sort_by_mtime = no
2040#
2041#enable_window_title = yes
2042#
2043##
2044## Note: You can choose default search mode for search
2045## engine. Available modes are:
2046##
2047## - 1 - use mpd built-in searching (no regexes, pattern matching)
2048## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2049## but if your mpd is on a remote machine, downloading big database
2050## to process it can take a while
2051## - 3 - match only exact values (this mode uses mpd function for searching
2052## in database and local one for searching in current playlist)
2053##
2054#
2055#search_engine_default_search_mode = 1
2056#
2057#external_editor = nano
2058#
2059## Note: set to yes if external editor is a console application.
2060##
2061#use_console_editor = yes
2062#
2063##### colors definitions #####
2064##
2065## It is possible to set a background color by setting a color
2066## value "<foreground>_<background>", e.g. red_black will set
2067## foregound color to red and background color to black.
2068##
2069## In addition, for terminals that support 256 colors it
2070## is possible to set one of them by using a number in range
2071## [1, 256] instead of color name, e.g. numerical value
2072## corresponding to red_black is 2_1. To find out if the
2073## terminal supports 256 colors, run ncmpcpp and check out
2074## the bottom of the help screen for list of available colors
2075## and their numerical values.
2076##
2077## Note: due to technical limitations of ncurses, if 256 colors
2078## are used, it is possible to either use only the colors with
2079## default background color, or all pairs from 1_1 up to 254_127,
2080## depending on the ncurses version used.
2081##
2082#
2083#colors_enabled = yes
2084#
2085#empty_tag_color = cyan
2086#
2087#header_window_color = default
2088#
2089#volume_color = default
2090#
2091#state_line_color = default
2092#
2093#state_flags_color = default
2094#
2095#main_window_color = yellow
2096#
2097#color1 = white
2098#
2099#color2 = green
2100#
2101#main_window_highlight_color = yellow
2102#
2103#progressbar_color = black
2104#
2105#progressbar_elapsed_color = green
2106#
2107#statusbar_color = default
2108#
2109#alternative_ui_separator_color = black
2110#
2111#active_column_color = red
2112#
2113#window_border_color = green
2114#
2115#active_window_border = red
2116#
2117#+end_src
2118
2119*** bindings
2120:PROPERTIES:
2121:header-args+: :tangle ~/.ncmpcpp/bindings
2122:END:
2123
2124#+begin_src conf :tangle no
2125def_key "j"
2126 scroll_down
2127def_key "k"
2128 scroll_up
2129
2130def_key "ctrl-u"
2131 page_up
2132def_key "ctrl-d"
2133 page_down
2134
2135def_key "h"
2136 previous_column
2137def_key "l"
2138 next_column
2139
2140def_key "."
2141 show_lyrics
2142
2143def_key "n"
2144 next_found_item
2145def_key "N"
2146 previous_found_item
2147
2148def_key "J"
2149 move_sort_order_down
2150def_key "K"
2151 move_sort_order_up
2152#+end_src
2153
25869427
AB
2154** notmuch
2155
2156*** notmuch-config
2157:PROPERTIES:
2158:header-args+: :tangle ~/.notmuch-config
2159:END:
2160
2161#+begin_src conf
2162# .notmuch-config - Configuration file for the notmuch mail system
2163#
2164# For more information about notmuch, see https://notmuchmail.org
2165
2166# Database configuration
2167#
2168# The only value supported here is 'path' which should be the top-level
2169# directory where your mail currently exists and to where mail will be
2170# delivered in the future. Files should be individual email messages.
2171# Notmuch will store its database within a sub-directory of the path
2172# configured here named ".notmuch".
2173#
2174[database]
2175path=/home/amin/mail
2176
2177# User configuration
2178#
2179# Here is where you can let notmuch know how you would like to be
2180# addressed. Valid settings are
2181#
2182# name Your full name.
2183# primary_email Your primary email address.
2184# other_email A list (separated by ';') of other email addresses
2185# at which you receive email.
2186#
2187# Notmuch will use the various email addresses configured here when
2188# formatting replies. It will avoid including your own addresses in the
2189# recipient list of replies, and will set the From address based on the
2190# address to which the original email was addressed.
2191#
2192[user]
2193name=Amin Bandali
2194primary_email=amin@aminb.org
05675ca4 2195other_email=bandali@gnu.org;abandali@uwaterloo.ca;
25869427
AB
2196
2197# Configuration for "notmuch new"
2198#
2199# The following options are supported here:
2200#
2201# tags A list (separated by ';') of the tags that will be
2202# added to all messages incorporated by "notmuch new".
2203#
2204# ignore A list (separated by ';') of file and directory names
2205# that will not be searched for messages by "notmuch new".
2206#
2207# NOTE: *Every* file/directory that goes by one of those
2208# names will be ignored, independent of its depth/location
2209# in the mail store.
2210#
2211[new]
2212tags=new;
2213#tags=unread;inbox;
18faca55 2214ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
25869427
AB
2215
2216# Search configuration
2217#
2218# The following option is supported here:
2219#
2220# exclude_tags
2221# A ;-separated list of tags that will be excluded from
2222# search results by default. Using an excluded tag in a
2223# query will override that exclusion.
2224#
2225[search]
2226exclude_tags=deleted;spam;
2227
2228# Maildir compatibility configuration
2229#
2230# The following option is supported here:
2231#
2232# synchronize_flags Valid values are true and false.
2233#
2234# If true, then the following maildir flags (in message filenames)
2235# will be synchronized with the corresponding notmuch tags:
2236#
2237# Flag Tag
2238# ---- -------
2239# D draft
2240# F flagged
2241# P passed
2242# R replied
2243# S unread (added when 'S' flag is not present)
2244#
2245# The "notmuch new" command will notice flag changes in filenames
2246# and update tags, while the "notmuch tag" and "notmuch restore"
2247# commands will notice tag changes and update flags in filenames
2248#
2249[maildir]
2250synchronize_flags=true
2251
2252# Cryptography related configuration
2253#
2254# The following option is supported here:
2255#
2256# gpg_path
2257# binary name or full path to invoke gpg.
2258#
2259[crypto]
2260gpg_path=gpg
2261#+end_src
2262
18faca55
AB
2263*** pre-new hook
2264:PROPERTIES:
2265:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2266:END:
2267
2268#+begin_src sh
2269touch /tmp/gnusieve.log
2270sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2271 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2272#+end_src
2273
25869427
AB
2274*** post-new hook
2275:PROPERTIES:
2276:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2277:END:
2278
2279#+begin_src sh
18faca55 2280# apply sent tag to messages sent by me
05675ca4 2281notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
18faca55
AB
2282
2283# initial tagging
b6c1036f 2284notmuch tag -latest -- tag:latest
53960d74 2285notmuch tag +inbox +unread +latest -new -- tag:new
25869427 2286
378b4afa 2287
25869427 2288# apply tags to lists
378b4afa
AB
2289
2290# <aminb>
18faca55 2291notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
378b4afa 2292notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
ddb0b1d4 2293
2a6e947b 2294notmuch tag -inbox +pay -- folder:amin/pay
74ef10b0 2295notmuch tag -inbox +banking -- folder:amin/banking
2a6e947b 2296notmuch tag -inbox +work -- folder:amin/work
378b4afa
AB
2297# </aminb>
2298
2299# <uw>
2a6e947b
AB
2300notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2301notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2302notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2303notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2304notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
378b4afa 2305
d5dbdde5 2306notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
378b4afa
AB
2307notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2308notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2309notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2310notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2311notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2312# </uw>
2313
2314# <gnu>
b6c1036f
AB
2315notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2316notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2317notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2318notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2319notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2320notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2321notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2322notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2323notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2324notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2325notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2326
2327notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2328notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2329notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2330notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2331
2332notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2333notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2334notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2335notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2336notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
ddb0b1d4 2337# </gnu>
b6232163
AB
2338
2339notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2340notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
25869427
AB
2341#+end_src
2342
2343*** notmuch.service
2344:PROPERTIES:
2345:header-args+: :tangle ~/.config/systemd/user/notmuch.service
2346:END:
2347
2348#+begin_src conf :tangle no
2349[Unit]
2350Description=notmuch service
2351
2352[Service]
2353Type=oneshot
2354ExecStart=/usr/bin/notmuch new
2355StandardOutput=syslog
2356StandardError=syslog
2357#+end_src
2358
2359*** notmuch.timer
2360:PROPERTIES:
2361:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2362:END:
2363
2364#+begin_src conf :tangle no
2365[Unit]
2366Description=notmuch timer
2367
2368[Timer]
2369OnCalendar=*:0/5
2370Persistent=true
2371Unit=notmuch.service
2372
2373[Install]
2374WantedBy=timers.target
2375#+end_src
2376
2377** offlineimap
2378
2379*** offlineimaprc
2380:PROPERTIES:
2381:header-args+: :tangle ~/.offlineimaprc
2382:END:
2383
2384#+begin_src conf :tangle no
2385[general]
2386pythonfile = ~/.offlineimap.py
2387accounts = Gmail, aminb
2388maxsyncaccounts = 3
2389
2390[Account Gmail]
2391localrepository = GmailL
2392remoterepository = GmailR
2393
2394[Account aminb]
2395localrepository = aminbL
2396remoterepository = aminbR
2397
2398[Repository GmailL]
2399type = Maildir
2400localfolders = ~/Maildir/Gmail
2401
2402[Repository GmailR]
2403type = IMAP
2404remotehost = imap.gmail.com
2405remoteusereval = mailuser("gmail")
2406remotepasseval = mailpasswd("gmail")
2407sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2408ssl = yes
2409folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2410maxconnections = 1
2411realdelete = no
2412
2413[Repository aminbL]
2414type = Maildir
2415localfolders = ~/Maildir/aminb
2416
2417[Repository aminbR]
2418type = IMAP
2419remotehost = mail.aminb.org
2420remoteusereval = mailuser("aminb")
2421remotepasseval = mailpasswd("aminb")
2422sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2423ssl = yes
2424folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2425maxconnections = 1
2426realdelete = no
2427#+end_src
2428
2429*** offlineimap.py
2430:PROPERTIES:
2431:header-args+: :tangle ~/.offlineimap.py
2432:END:
2433
2434#+begin_src python :tangle no
2435import os
2436import subprocess
2437
2438def mailpasswd(acct):
2439 acct = os.path.basename(acct)
2440 path = "/home/amin/.passwd/%s.gpg" % acct
2441 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2442 try:
2443 return subprocess.check_output(args).strip()
2444 except subprocess.CalledProcessError:
2445 return ""
2446
2447def mailuser(acct):
2448 acct = os.path.basename(acct)
2449 path = "/home/amin/.passwd/%s" % acct
2450 args = ["cat", path]
2451 try:
2452 return subprocess.check_output(args).strip()
2453 except subprocess.CalledProcessError:
2454 return ""
2455
2456def prime_gpg_agent():
2457 ret = False
2458 i = 1
2459 while not ret:
2460 ret = (mailpasswd("prime") == "prime")
2461 if i > 2:
2462 from offlineimap.ui import getglobalui
2463 sys.stderr.write("Error reading in passwords. Terminating.\n")
2464 getglobalui().terminate()
2465 i += 1
2466 return ret
2467
2468prime_gpg_agent()
2469#+end_src
2470
8e15d300
AB
2471** pigeonhole
2472*** gnu.sieve
2473:PROPERTIES:
2474:header-args+: :tangle ~/sieve/gnu.sieve :comments none
2475:END:
2476
2477#+begin_src conf
2478require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2479
2480if anyof (
2481 address :is "from" "webmasters@gnu.org",
2482 address :is "from" "webmasters-comment@gnu.org") {
2483 fileinto :create "webmasters";
2484 stop;
2485}
2486
2487include :personal "lists";
2488#+end_src
2489
2490*** lists.sieve
2491:PROPERTIES:
2492:header-args+: :tangle ~/sieve/lists.sieve :comments none
2493:END:
2494
2495#+begin_src conf
2496require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2497 "include" ];
2498
2499if anyof (
2500 header :contains "list-id" "<emacs-devel.gnu.org>",
378b4afa
AB
2501 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2502 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2503 header :contains "list-id" "<fencepost-users.gnu.org>",
8e15d300
AB
2504 header :contains "list-id" "<guix-devel.gnu.org>",
2505 header :contains "list-id" "<guile-devel.gnu.org>",
2506 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2507 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2508 header :contains "list-id" "<www-commits.gnu.org>",
2509 header :contains "list-id" "<www-discuss.gnu.org>",
8e15d300
AB
2510 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2511 header :contains "list-id" "<haskell-cafe.haskell.org>",
378b4afa 2512 header :contains "list-id" "<haskell-art.we.lurk.org>",
8e15d300
AB
2513 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2514 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2515 set :lower "listname" "${1}";
2516 fileinto :create "l/${listname}";
2517 }
2518}
b6c1036f
AB
2519
2520if anyof (
2521 header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2522 header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2523 header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2524 header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2525 header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2526 if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2527 set :lower "username" "${1}";
2528 set :lower "listname" "${2}";
2529 fileinto :create "l/${username}/${listname}";
2530 }
2531}
8e15d300
AB
2532#+end_src
2533
1656853a
AB
2534** polybar
2535
2536*** config
2537:PROPERTIES:
2538:header-args+: :tangle ~/.config/polybar/config
2539:END:
2540
2541#+begin_src conf :tangle no
2542;=====================================================
2543;
2544; To learn more about how to configure Polybar
2545; go to https://github.com/jaagr/polybar
2546;
2547; The README contains alot of information
2548;
2549;=====================================================
2550
2551[colors]
2552;background = ${xrdb:color0:#222}
2553background = #222
2554background-alt = #444
2555;foreground = ${xrdb:color7:#222}
2556foreground = #eee
2557foreground-alt = #888
2558primary = #ffb52a
2559secondary = #e60053
2560alert = #bd2c40
2561
2562[bar/main]
2563;monitor = ${env:MONITOR:HDMI-1}
2564width = 100%
2565height = 27
2566;offset-x = 1%
2567;offset-y = 1%
2568radius = 3.0
2569fixed-center = true
2570
2571background = ${colors.background}
2572foreground = ${colors.foreground}
2573
2574line-size = 3
2575line-color = #f00
2576
2577border-size = 4
2578border-color = #00000000
2579
2580padding-left = 0
2581padding-right = 2
2582
2583module-margin-left = 2
2584module-margin-right = 2
2585
2586font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2587font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2588font-2 = Wuncon Siji:pixelsize=10;1
2589font-3 = FontAwesome:pixelsize=10;1
2590
2591modules-left = bspwm xwindow
2592modules-center =
2593modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2594
2595tray-position = right
2596tray-padding = 1
2597;tray-transparent = true
2598;tray-background = #0063ff
2599tray-maxsize = 18
2600
2601wm-restack = bspwm
2602
2603;override-redirect = true
2604
2605scroll-up = bspwm-desknext
2606scroll-down = bspwm-deskprev
2607
2608[module/xwindow]
2609type = internal/xwindow
2610label = %title:0:50:...%
2611
2612[module/xkeyboard]
2613type = internal/xkeyboard
2614blacklist-0 = num lock
2615
2616format-prefix = " "
2617format-prefix-foreground = ${colors.foreground-alt}
2618format-prefix-underline = ${colors.secondary}
2619
2620label-layout = %layout%
2621label-layout-underline = ${colors.secondary}
2622
2623label-indicator-padding = 2
2624label-indicator-margin = 1
2625label-indicator-background = ${colors.secondary}
2626label-indicator-underline = ${colors.secondary}
2627
2628[module/filesystem]
2629type = internal/fs
2630interval = 25
2631
2632mount-0 = /
2633
2634label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2635label-unmounted = %mountpoint% not mounted
2636label-unmounted-foreground = ${colors.foreground-alt}
2637
2638[module/bspwm]
2639type = internal/bspwm
2640
2641label-focused = %index%
2642label-focused-background = ${colors.background-alt}
2643label-focused-underline= ${colors.primary}
2644label-focused-padding = 2
2645
2646label-occupied = %index%
2647label-occupied-padding = 2
2648
2649label-urgent = %index%!
2650label-urgent-background = ${colors.alert}
2651label-urgent-padding = 2
2652
2653label-empty = %index%
2654label-empty-foreground = ${colors.foreground-alt}
2655label-empty-padding = 2
2656
2657[module/i3]
2658type = internal/i3
2659format = <label-state> <label-mode>
2660index-sort = true
2661wrapping-scroll = false
2662
2663; Only show workspaces on the same output as the bar
2664;pin-workspaces = true
2665
2666label-mode-padding = 2
2667label-mode-foreground = #000
2668label-mode-background = ${colors.primary}
2669
2670; focused = Active workspace on focused monitor
2671label-focused = %index%
2672label-focused-background = ${module/bspwm.label-focused-background}
2673label-focused-underline = ${module/bspwm.label-focused-underline}
2674label-focused-padding = ${module/bspwm.label-focused-padding}
2675
2676; unfocused = Inactive workspace on any monitor
2677label-unfocused = %index%
2678label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2679
2680; visible = Active workspace on unfocused monitor
2681label-visible = %index%
2682label-visible-background = ${self.label-focused-background}
2683label-visible-underline = ${self.label-focused-underline}
2684label-visible-padding = ${self.label-focused-padding}
2685
2686; urgent = Workspace with urgency hint set
2687label-urgent = %index%
2688label-urgent-background = ${module/bspwm.label-urgent-background}
2689label-urgent-padding = ${module/bspwm.label-urgent-padding}
2690
2691[module/mpd]
2692type = internal/mpd
2693format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2694
2695icon-prev = 
2696icon-stop = 
2697icon-play = 
2698icon-pause = 
2699icon-next = 
2700
2701label-song-maxlen = 25
2702label-song-ellipsis = true
2703
2704[module/xbacklight]
2705type = internal/xbacklight
2706
2707format = <label> <bar>
2708label = BL
2709
2710bar-width = 10
2711bar-indicator = |
2712bar-indicator-foreground = #ff
2713bar-indicator-font = 2
2714bar-fill = ─
2715bar-fill-font = 2
2716bar-fill-foreground = #9f78e1
2717bar-empty = ─
2718bar-empty-font = 2
2719bar-empty-foreground = ${colors.foreground-alt}
2720
2721[module/backlight-acpi]
2722inherit = module/xbacklight
2723type = internal/backlight
2724;card = intel_backlight
2725card = mba6x_backlight
2726
2727[module/cpu]
2728type = internal/cpu
2729interval = 2
2730format-prefix = " "
2731format-prefix-foreground = ${colors.foreground-alt}
2732format-underline = #f90000
2733label = %percentage%%
2734
2735[module/memory]
2736type = internal/memory
2737interval = 2
2738format-prefix = " "
2739format-prefix-foreground = ${colors.foreground-alt}
2740format-underline = #4bffdc
2741label = %percentage_used%%
2742
2743[module/wlan]
2744type = internal/network
2745interface =
2746interval = 3.0
2747
2748format-connected = <ramp-signal> <label-connected>
2749format-connected-underline = #9f78e1
2750label-connected = %essid%
2751
2752format-disconnected =
2753;format-disconnected = <label-disconnected>
2754;format-disconnected-underline = ${self.format-connected-underline}
2755;label-disconnected = %ifname% disconnected
2756;label-disconnected-foreground = ${colors.foreground-alt}
2757
2758ramp-signal-0 = 
2759ramp-signal-1 = 
2760ramp-signal-2 = 
2761ramp-signal-3 = 
2762ramp-signal-4 = 
2763ramp-signal-foreground = ${colors.foreground-alt}
2764
2765[module/eth]
2766type = internal/network
2767interface =
2768interval = 3.0
2769
2770format-connected-underline = #55aa55
2771format-connected-prefix = " "
2772format-connected-prefix-foreground = ${colors.foreground-alt}
2773label-connected = %local_ip%
2774
2775format-disconnected =
2776;format-disconnected = <label-disconnected>
2777;format-disconnected-underline = ${self.format-connected-underline}
2778;label-disconnected = %ifname% disconnected
2779;label-disconnected-foreground = ${colors.foreground-alt}
2780
2781[module/date]
2782type = internal/date
2783interval = 5
2784
2785date =
2786date-alt = " %Y-%m-%d"
2787
2788time = %H:%M
2789time-alt = %H:%M:%S
2790
2791format-prefix = 
2792format-prefix-foreground = ${colors.foreground-alt}
2793format-underline = #0a6cf5
2794
2795label = %date% %time%
2796
2797[module/volume]
2798type = internal/volume
2799
2800format-volume = <label-volume> <bar-volume>
2801label-volume = vol
2802label-volume-foreground = ${root.foreground}
2803
2804format-muted-prefix = " "
2805format-muted-foreground = ${colors.foreground-alt}
2806label-muted = mute
2807
2808bar-volume-width = 10
2809bar-volume-foreground-0 = #55aa55
2810bar-volume-foreground-1 = #55aa55
2811bar-volume-foreground-2 = #55aa55
2812bar-volume-foreground-3 = #55aa55
2813bar-volume-foreground-4 = #55aa55
2814bar-volume-foreground-5 = #f5a70a
2815bar-volume-foreground-6 = #ff5555
2816bar-volume-gradient = false
2817bar-volume-indicator = |
2818bar-volume-indicator-font = 2
2819bar-volume-fill = ─
2820bar-volume-fill-font = 2
2821bar-volume-empty = ─
2822bar-volume-empty-font = 2
2823bar-volume-empty-foreground = ${colors.foreground-alt}
2824
2825[module/battery]
2826type = internal/battery
2827battery = BAT0
2828adapter = ADP1
2829full-at = 64
2830
2831format-charging = <animation-charging> <label-charging>
2832format-charging-underline = #ffb52a
2833
2834format-discharging = <ramp-capacity> <label-discharging>
2835format-discharging-underline = ${self.format-charging-underline}
2836
2837format-full-prefix = " "
2838format-full-prefix-foreground = ${colors.foreground-alt}
2839format-full-underline = ${self.format-charging-underline}
2840
2841ramp-capacity-0 = 
2842ramp-capacity-1 = 
2843ramp-capacity-2 = 
2844ramp-capacity-foreground = ${colors.foreground-alt}
2845
2846animation-charging-0 = 
2847animation-charging-1 = 
2848animation-charging-2 = 
2849animation-charging-foreground = ${colors.foreground-alt}
2850animation-charging-framerate = 750
2851
2852[module/temperature]
2853type = internal/temperature
2854thermal-zone = 1
2855warn-temperature = 66
2856
2857format = <ramp> <label>
2858format-underline = #f50a4d
2859format-warn = <ramp> <label-warn>
2860format-warn-underline = ${self.format-underline}
2861
2862label = %temperature%
2863label-warn = %temperature%
2864label-warn-foreground = ${colors.secondary}
2865
2866ramp-0 = 
2867ramp-1 = 
2868ramp-2 = 
2869ramp-foreground = ${colors.foreground-alt}
2870
2871[module/powermenu]
2872type = custom/menu
2873
2874format-spacing = 1
2875
2876label-open = 
2877label-open-foreground = ${colors.secondary}
2878label-close =  cancel
2879label-close-foreground = ${colors.secondary}
2880label-separator = |
2881label-separator-foreground = ${colors.foreground-alt}
2882
2883menu-0-0 = reboot
2884menu-0-0-exec = menu-open-1
2885menu-0-1 = power off
2886menu-0-1-exec = menu-open-2
2887
2888menu-1-0 = cancel
2889menu-1-0-exec = menu-open-0
2890menu-1-1 = reboot
2891menu-1-1-exec = sudo reboot
2892
2893menu-2-0 = power off
2894menu-2-0-exec = sudo poweroff
2895menu-2-1 = cancel
2896menu-2-1-exec = menu-open-0
2897
2898[module/mail]
2899type = custom/script
2900interval = 60
2901format = <label>
2902format-prefix = " "
2903format-prefix-foreground = ${colors.foreground-alt}
2904format-underline = #0a6cf5
2905exec = notmuch count tag:unread
2906
2907[settings]
2908screenchange-reload = true
2909;compositing-background = xor
2910;compositing-background = screen
2911;compositing-foreground = source
2912;compositing-border = over
2913
2914[global/wm]
2915margin-top = 0
2916margin-bottom = 0
2917
2918; vim:ft=dosini
2919#+end_src
2920
2921*** polybar-launch
2922:PROPERTIES:
2e877d14 2923:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
1656853a
AB
2924:END:
2925
2e877d14 2926#+begin_src sh :tangle no
1656853a
AB
2927# Terminate already running bar instances
2928killall -q polybar
2929
2930# Wait until the processes have been shut down
2931while pgrep -x polybar >/dev/null; do sleep 1; done
2932
2933# Launch main bar
2934polybar main &
2935
2936echo "Bars launched..."
2937#+end_src
2938
b165a3e5
AB
2939** PowerTOP
2940:PROPERTIES:
2941:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2942:END:
2943
2944#+begin_src conf
2945[Unit]
2946Description=Powertop tunings
2947
2948[Service]
2949ExecStart=/usr/bin/powertop --auto-tune
2950RemainAfterExit=true
2951
2952[Install]
2953WantedBy=multi-user.target
2954#+end_src
2955
1656853a
AB
2956** ranger
2957
2958*** rc.conf
2959:PROPERTIES:
2960:header-args+: :tangle ~/.config/ranger/rc.conf
2961:END:
2962
2963#+begin_src conf :tangle no
2964# ===================================================================
2965# This file contains the default startup commands for ranger.
2966# To change them, it is recommended to create the file
2967# ~/.config/ranger/rc.conf and add your custom commands there.
2968#
2969# If you copy this whole file there, you may want to set the environment
2970# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2971#
2972# The purpose of this file is mainly to define keybindings and settings.
2973# For running more complex python code, please create a plugin in "plugins/" or
2974# a command in "commands.py".
2975#
2976# Each line is a command that will be run before the user interface
2977# is initialized. As a result, you can not use commands which rely
2978# on the UI such as :delete or :mark.
2979# ===================================================================
2980
2981# ===================================================================
2982# == Options
2983# ===================================================================
2984
2985# How many columns are there, and what are their relative widths?
2986set column_ratios 1,3,4
2987
2988# Which files should be hidden? (regular expression)
2989set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2990
2991# Show hidden files? You can toggle this by typing 'zh'
2992set show_hidden false
2993
2994# Ask for a confirmation when running the "delete" command?
2995# Valid values are "always" (default), "never", "multiple"
2996# With "multiple", ranger will ask only if you delete multiple files at once.
2997set confirm_on_delete multiple
2998
2999# Which script is used to generate file previews?
3000# ranger ships with scope.sh, a script that calls external programs (see
3001# README for dependencies) to preview images, archives, etc.
3002set preview_script ~/.config/ranger/scope.sh
3003
3004# Use the external preview script or display simple plain text previews?
3005set use_preview_script true
3006
3007# Open all images in this directory when running certain image viewers
3008# like feh or sxiv? You can still open selected files by marking them.
3009set open_all_images true
3010
3011# Be aware of version control systems and display information.
3012set vcs_aware false
3013
3014# State of the three backends git, hg, bzr. The possible states are
3015# disabled, local (only show local info), enabled (show local and remote
3016# information).
3017set vcs_backend_git enabled
3018set vcs_backend_hg disabled
3019set vcs_backend_bzr disabled
3020
3021# Preview images in full color with the external command "w3mimgpreview"?
3022# This requires the console web browser "w3m" and a supported terminal.
3023# It has been successfully tested with "xterm" and "urxvt" without tmux.
3024set preview_images true
3025
3026# Use a unicode "..." character to mark cut-off filenames?
3027set unicode_ellipsis false
3028
3029# Show dotfiles in the bookmark preview box?
3030set show_hidden_bookmarks true
3031
3032# Which colorscheme to use? These colorschemes are available by default:
3033# default, jungle, snow
3034set colorscheme default
3035
3036# Preview files on the rightmost column?
3037# And collapse (shrink) the last column if there is nothing to preview?
3038set preview_files true
3039set preview_directories true
3040set collapse_preview true
3041
3042# Save the console history on exit?
3043set save_console_history true
3044
3045# Draw the status bar on top of the browser window (default: bottom)
3046set status_bar_on_top false
3047
3048# Draw a progress bar in the status bar which displays the average state of all
3049# currently running tasks which support progress bars?
3050set draw_progress_bar_in_status_bar true
3051
3052# Draw borders around columns?
3053set draw_borders true
3054
3055# Display the directory name in tabs?
3056set dirname_in_tabs false
3057
3058# Enable the mouse support?
3059set mouse_enabled true
3060
3061# Display the file size in the main column or status bar?
3062set display_size_in_main_column true
3063set display_size_in_status_bar true
3064
3065# Display files tags in all columns or only in main column?
3066set display_tags_in_all_columns true
3067
3068# Set a title for the window?
3069set update_title false
3070
3071# Set the title to "ranger" in the tmux program?
3072set update_tmux_title false
3073
3074# Shorten the title if it gets long? The number defines how many
3075# directories are displayed at once, 0 turns off this feature.
3076set shorten_title 3
3077
3078# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3079set tilde_in_titlebar false
3080
3081# How many directory-changes or console-commands should be kept in history?
3082set max_history_size 20
3083set max_console_history_size 50
3084
3085# Try to keep so much space between the top/bottom border when scrolling:
3086set scroll_offset 8
3087
3088# Flush the input after each key hit? (Noticable when ranger lags)
3089set flushinput true
3090
3091# Padding on the right when there's no preview?
3092# This allows you to click into the space to run the file.
3093set padding_right true
3094
3095# Save bookmarks (used with mX and `X) instantly?
3096# This helps to synchronize bookmarks between multiple ranger
3097# instances but leads to *slight* performance loss.
3098# When false, bookmarks are saved when ranger is exited.
3099set autosave_bookmarks true
3100
3101# You can display the "real" cumulative size of directories by using the
3102# command :get_cumulative_size or typing "dc". The size is expensive to
3103# calculate and will not be updated automatically. You can choose
3104# to update it automatically though by turning on this option:
3105set autoupdate_cumulative_size false
3106
3107# Turning this on makes sense for screen readers:
3108set show_cursor false
3109
3110# One of: size, basename, mtime, type
3111set sort natural
3112
3113# Additional sorting options
3114set sort_reverse false
3115set sort_case_insensitive true
3116set sort_directories_first true
3117
3118# Enable this if key combinations with the Alt Key don't work for you.
3119# (Especially on xterm)
3120set xterm_alt_key false
3121
3122# ===================================================================
3123# == Local Options
3124# ===================================================================
3125# You can set local options that only affect a single directory.
3126
3127# Examples:
3128# setlocal path=~/downloads sort mtime
3129
3130# ===================================================================
3131# == Command Aliases in the Console
3132# ===================================================================
3133
3134alias e edit
3135alias q quit
3136alias q! quitall
3137alias qall quitall
3138alias setl setlocal
3139
3140alias filter scout -prt
3141alias find scout -aet
3142alias mark scout -mr
3143alias unmark scout -Mr
3144alias search scout -rs
3145alias search_inc scout -rts
3146alias travel scout -aefiklst
3147
3148# ===================================================================
3149# == Define keys for the browser
3150# ===================================================================
3151
3152# Basic
3153map Q quit!
3154map q quit
3155copymap q ZZ ZQ
3156
3157map R reload_cwd
3158map <C-r> reset
3159map <C-l> redraw_window
3160map <C-c> abort
3161map <esc> change_mode normal
3162
3163map i display_file
3164map ? help
3165map W display_log
3166map w taskview_open
3167map S shell $SHELL
3168
3169map : console
3170map ; console
3171map ! console shell
3172map @ console -p6 shell %%s
3173map # console shell -p
3174map s console shell
3175map r chain draw_possible_programs; console open_with
3176map f console find
3177map cd console cd
3178
3179# Tagging / Marking
3180map t tag_toggle
3181map ut tag_remove
3182map "<any> tag_toggle tag=%any
3183map <Space> mark_files toggle=True
3184map v mark_files all=True toggle=True
3185map uv mark_files all=True val=False
3186map V toggle_visual_mode
3187map uV toggle_visual_mode reverse=True
3188
3189# For the nostalgics: Midnight Commander bindings
3190map <F1> help
3191map <F3> display_file
3192map <F4> edit
3193map <F5> copy
3194map <F6> cut
3195map <F7> console mkdir
3196map <F8> console delete
3197map <F10> exit
3198
3199# In case you work on a keyboard with dvorak layout
3200map <UP> move up=1
3201map <DOWN> move down=1
3202map <LEFT> move left=1
3203map <RIGHT> move right=1
3204map <HOME> move to=0
3205map <END> move to=-1
3206map <PAGEDOWN> move down=1 pages=True
3207map <PAGEUP> move up=1 pages=True
3208map <CR> move right=1
3209map <DELETE> console delete
3210map <INSERT> console touch
3211
3212# VIM-like
3213copymap <UP> k
3214copymap <DOWN> j
3215copymap <LEFT> h
3216copymap <RIGHT> l
3217copymap <HOME> gg
3218copymap <END> G
3219copymap <PAGEDOWN> <C-F>
3220copymap <PAGEUP> <C-B>
3221
3222map J move down=0.5 pages=True
3223map K move up=0.5 pages=True
3224copymap J <C-D>
3225copymap K <C-U>
3226
3227# Jumping around
3228map H history_go -1
3229map L history_go 1
3230map ] move_parent 1
3231map [ move_parent -1
3232map } traverse
3233
3234map gh cd ~
3235map ge cd /etc
3236map gu cd /usr
3237map gd cd /dev
3238map gl cd -r .
3239map gL cd -r %f
3240map go cd /opt
3241map gv cd /var
3242map gm cd /media
3243map gM cd /mnt
3244map gs cd /srv
3245map gr cd /
3246map gR eval fm.cd(ranger.RANGERDIR)
3247map g/ cd /
3248map g? cd /usr/share/doc/ranger
3249
3250# External Programs
3251map E edit
3252map du shell -p du --max-depth=1 -h --apparent-size
3253map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3254map yp shell -d echo -n %d/%f | xsel -i
3255map yd shell -d echo -n %d | xsel -i
3256map yn shell -d echo -n %f | xsel -i
3257
3258# Filesystem Operations
3259map = chmod
3260
3261map cw console rename
3262map A eval fm.open_console('rename ' + fm.thisfile.basename)
3263map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3264
3265map pp paste
3266map po paste overwrite=True
3267map pl paste_symlink relative=False
3268map pL paste_symlink relative=True
3269map phl paste_hardlink
3270map pht paste_hardlinked_subtree
3271
3272map dd cut
3273map ud uncut
3274map da cut mode=add
3275map dr cut mode=remove
3276
3277map yy copy
3278map uy uncut
3279map ya copy mode=add
3280map yr copy mode=remove
3281
3282# Temporary workarounds
3283map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3284map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3285map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3286map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3287map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3288map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3289map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3290map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3291
3292# Searching
3293map / console search
3294map n search_next
3295map N search_next forward=False
3296map ct search_next order=tag
3297map cs search_next order=size
3298map ci search_next order=mimetype
3299map cc search_next order=ctime
3300map cm search_next order=mtime
3301map ca search_next order=atime
3302
3303# Tabs
3304map <C-n> tab_new ~
3305map <C-w> tab_close
3306map <TAB> tab_move 1
3307map <S-TAB> tab_move -1
3308map <A-Right> tab_move 1
3309map <A-Left> tab_move -1
3310map gt tab_move 1
3311map gT tab_move -1
3312map gn tab_new ~
3313map gc tab_close
3314map uq tab_restore
3315map <a-1> tab_open 1
3316map <a-2> tab_open 2
3317map <a-3> tab_open 3
3318map <a-4> tab_open 4
3319map <a-5> tab_open 5
3320map <a-6> tab_open 6
3321map <a-7> tab_open 7
3322map <a-8> tab_open 8
3323map <a-9> tab_open 9
3324
3325# Sorting
3326map or toggle_option sort_reverse
3327map os chain set sort=size; set sort_reverse=False
3328map ob chain set sort=basename; set sort_reverse=False
3329map on chain set sort=natural; set sort_reverse=False
3330map om chain set sort=mtime; set sort_reverse=False
3331map oc chain set sort=ctime; set sort_reverse=False
3332map oa chain set sort=atime; set sort_reverse=False
3333map ot chain set sort=type; set sort_reverse=False
3334
3335map oS chain set sort=size; set sort_reverse=True
3336map oB chain set sort=basename; set sort_reverse=True
3337map oN chain set sort=natural; set sort_reverse=True
3338map oM chain set sort=mtime; set sort_reverse=True
3339map oC chain set sort=ctime; set sort_reverse=True
3340map oA chain set sort=atime; set sort_reverse=True
3341map oT chain set sort=type; set sort_reverse=True
3342
3343map dc get_cumulative_size
3344
3345# Settings
3346map zc toggle_option collapse_preview
3347map zd toggle_option sort_directories_first
3348map zh toggle_option show_hidden
3349map <C-h> toggle_option show_hidden
3350map zi toggle_option flushinput
3351map zm toggle_option mouse_enabled
3352map zp toggle_option preview_files
3353map zP toggle_option preview_directories
3354map zs toggle_option sort_case_insensitive
3355map zu toggle_option autoupdate_cumulative_size
3356map zv toggle_option use_preview_script
3357map zf console filter
3358
3359# Bookmarks
3360map `<any> enter_bookmark %any
3361map '<any> enter_bookmark %any
3362map m<any> set_bookmark %any
3363map um<any> unset_bookmark %any
3364
3365map m<bg> draw_bookmarks
3366copymap m<bg> um<bg> `<bg> '<bg>
3367
3368# Generate all the chmod bindings with some python help:
3369eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3370eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3371eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3372eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3373eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3374
3375eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3376eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3377eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3378eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3379eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3380
3381# ===================================================================
3382# == Define keys for the console
3383# ===================================================================
3384# Note: Unmapped keys are passed directly to the console.
3385
3386# Basic
3387cmap <tab> eval fm.ui.console.tab()
3388cmap <s-tab> eval fm.ui.console.tab(-1)
3389cmap <ESC> eval fm.ui.console.close()
3390cmap <CR> eval fm.ui.console.execute()
3391cmap <C-l> redraw_window
3392
3393copycmap <ESC> <C-c>
3394copycmap <CR> <C-j>
3395
3396# Move around
3397cmap <up> eval fm.ui.console.history_move(-1)
3398cmap <down> eval fm.ui.console.history_move(1)
3399cmap <left> eval fm.ui.console.move(left=1)
3400cmap <right> eval fm.ui.console.move(right=1)
3401cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3402cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3403
3404# Line Editing
3405cmap <backspace> eval fm.ui.console.delete(-1)
3406cmap <delete> eval fm.ui.console.delete(0)
3407cmap <C-w> eval fm.ui.console.delete_word()
3408cmap <C-k> eval fm.ui.console.delete_rest(1)
3409cmap <C-u> eval fm.ui.console.delete_rest(-1)
3410cmap <C-y> eval fm.ui.console.paste()
3411
3412# And of course the emacs way
3413copycmap <up> <C-p>
3414copycmap <down> <C-n>
3415copycmap <left> <C-b>
3416copycmap <right> <C-f>
3417copycmap <home> <C-a>
3418copycmap <end> <C-e>
3419copycmap <delete> <C-d>
3420copycmap <backspace> <C-h>
3421
3422# Note: There are multiple ways to express backspaces. <backspace> (code 263)
3423# and <backspace2> (code 127). To be sure, use both.
3424copycmap <backspace> <backspace2>
3425
3426# This special expression allows typing in numerals:
3427cmap <allow_quantifiers> false
3428
3429# ===================================================================
3430# == Pager Keybindings
3431# ===================================================================
3432
3433# Movement
3434pmap <down> pager_move down=1
3435pmap <up> pager_move up=1
3436pmap <left> pager_move left=4
3437pmap <right> pager_move right=4
3438pmap <home> pager_move to=0
3439pmap <end> pager_move to=-1
3440pmap <pagedown> pager_move down=1.0 pages=True
3441pmap <pageup> pager_move up=1.0 pages=True
3442pmap <C-d> pager_move down=0.5 pages=True
3443pmap <C-u> pager_move up=0.5 pages=True
3444
3445copypmap <UP> k <C-p>
3446copypmap <DOWN> j <C-n> <CR>
3447copypmap <LEFT> h
3448copypmap <RIGHT> l
3449copypmap <HOME> g
3450copypmap <END> G
3451copypmap <C-d> d
3452copypmap <C-u> u
3453copypmap <PAGEDOWN> n f <C-F> <Space>
3454copypmap <PAGEUP> p b <C-B>
3455
3456# Basic
3457pmap <ESC> pager_close
3458copypmap <ESC> q Q i <F3>
3459pmap E edit_file
3460
3461# ===================================================================
3462# == Taskview Keybindings
3463# ===================================================================
3464
3465# Movement
3466tmap <up> taskview_move up=1
3467tmap <down> taskview_move down=1
3468tmap <home> taskview_move to=0
3469tmap <end> taskview_move to=-1
3470tmap <pagedown> taskview_move down=1.0 pages=True
3471tmap <pageup> taskview_move up=1.0 pages=True
3472tmap <C-d> taskview_move down=0.5 pages=True
3473tmap <C-u> taskview_move up=0.5 pages=True
3474
3475copytmap <UP> k <C-p>
3476copytmap <DOWN> j <C-n> <CR>
3477copytmap <HOME> g
3478copytmap <END> G
3479copytmap <C-u> u
3480copytmap <PAGEDOWN> n f <C-F> <Space>
3481copytmap <PAGEUP> p b <C-B>
3482
3483# Changing priority and deleting tasks
3484tmap J eval -q fm.ui.taskview.task_move(-1)
3485tmap K eval -q fm.ui.taskview.task_move(0)
3486tmap dd eval -q fm.ui.taskview.task_remove()
3487tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3488tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3489tmap <delete> eval -q fm.ui.taskview.task_remove()
3490
3491# Basic
3492tmap <ESC> taskview_close
3493copytmap <ESC> q Q w <C-c>
3494#+end_src
3495
3496*** scope.sh
3497:PROPERTIES:
2e877d14 3498:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
1656853a
AB
3499:END:
3500
2e877d14 3501#+begin_src sh :tangle no
1656853a
AB
3502# ranger supports enhanced previews. If the option "use_preview_script"
3503# is set to True and this file exists, this script will be called and its
3504# output is displayed in ranger. ANSI color codes are supported.
3505
3506# NOTES: This script is considered a configuration file. If you upgrade
3507# ranger, it will be left untouched. (You must update it yourself.)
3508# Also, ranger disables STDIN here, so interactive scripts won't work properly
3509
3510# Meanings of exit codes:
3511# code | meaning | action of ranger
3512# -----+------------+-------------------------------------------
3513# 0 | success | success. display stdout as preview
3514# 1 | no preview | failure. display no preview at all
3515# 2 | plain text | display the plain content of the file
3516# 3 | fix width | success. Don't reload when width changes
3517# 4 | fix height | success. Don't reload when height changes
3518# 5 | fix both | success. Don't ever reload
3519
3520# Meaningful aliases for arguments:
3521path="$1" # Full path of the selected file
3522width="$2" # Width of the preview pane (number of fitting characters)
3523height="$3" # Height of the preview pane (number of fitting characters)
3524
3525maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3526
3527# Find out something about the file:
3528mimetype=$(file --mime-type -Lb "$path")
3529extension=${path##*.}
3530
3531# Functions:
3532# runs a command and saves its output into $output. Useful if you need
3533# the return value AND want to use the output in a pipe
3534try() { output=$(eval '"$@"'); }
3535
3536# writes the output of the previouosly used "try" command
3537dump() { echo "$output"; }
3538
3539# a common post-processing function used after most commands
3540trim() { head -n "$maxln"; }
3541
3542# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3543highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3544
3545case "$extension" in
3546 # Archive extensions:
3547 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3548 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3549 try als "$path" && { dump | trim; exit 0; }
3550 try acat "$path" && { dump | trim; exit 3; }
3551 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3552 exit 1;;
3553 rar)
3554 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3555 # PDF documents:
3556 pdf)
3557 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3558 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3559 # BitTorrent Files
3560 torrent)
3561 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3562 # HTML Pages:
3563 htm|html|xhtml)
3564 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3565 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3566 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3567 ;; # fall back to highlight/cat if the text browsers fail
3568esac
3569
3570case "$mimetype" in
3571 # Syntax highlight for text files:
3572 text/* | */xml)
3573 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3574 # Ascii-previews of images:
3575 image/*)
3576 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3577 # Display information about media files:
3578 video/* | audio/*)
3579 exiftool "$path" && exit 5
3580 # Use sed to remove spaces so the output fits into the narrow window
3581 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3582esac
3583
3584exit 1
3585#+end_src
3586
2f1dcf9d
AB
3587** redshift
3588:PROPERTIES:
e2149232 3589:header-args+: :tangle ~/.config/redshift.conf :comments none
2f1dcf9d
AB
3590:END:
3591
3592#+begin_src conf
3593; Global settings for redshift
3594[redshift]
3595; Set the day and night screen temperatures (Neutral is 6500K)
3596;temp-day=5700
3597;temp-night=3500
3598
3599;temp-day=6500
3600temp-day=6200
3601;temp-night=4800
3602;temp-night=5000
3603;temp-night=4500
3604temp-night=4000
3605
3606; Enable/Disable a smooth transition between day and night
3607; 0 will cause a direct change from day to night screen temperature.
3608; 1 will gradually increase or decrease the screen temperature.
3609transition=1
3610
3611; Set the screen brightness. Default is 1.0.
3612;brightness=0.9
3613; It is also possible to use different settings for day and night
3614; since version 1.8.
3615;brightness-day=0.7
3616;brightness-night=0.4
3617; Set the screen gamma (for all colors, or each color channel
3618; individually)
3619;gamma=0.8
3620;gamma=1.0
3621;gamma=0.8:0.7:0.8
3622; This can also be set individually for day and night since
3623; version 1.10.
3624;gamma-day=0.8:0.7:0.8
3625;gamma-night=0.6
3626
3627; Set the location-provider: 'geoclue2' or 'manual'
3628; type 'redshift -l list' to see possible values.
3629; The location provider settings are in a different section.
3630;location-provider=manual
3631location-provider=geoclue2
3632
3633; Set the adjustment-method: 'randr', 'vidmode'
3634; type 'redshift -m list' to see all possible values.
3635; 'randr' is the preferred method, 'vidmode' is an older API.
3636; but works in some cases when 'randr' does not.
3637; The adjustment method settings are in a different section.
3638adjustment-method=randr
3639
3640; Configuration of the location-provider:
3641; type 'redshift -l PROVIDER:help' to see the settings.
3642; ex: 'redshift -l manual:help'
3643; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3644; are negative numbers.
3645;[manual]
3646;lat=48.1
3647;lon=11.6
3648
3649; Configuration of the adjustment-method
3650; type 'redshift -m METHOD:help' to see the settings.
3651; ex: 'redshift -m randr:help'
3652; In this example, randr is configured to adjust screen 1.
3653; Note that the numbering starts from 0, so this is actually the
3654; second screen. If this option is not specified, Redshift will try
3655; to adjust _all_ screens.
3656;[randr]
3657;screen=1
3658#+end_src
3659
3660** rofi
3661:PROPERTIES:
3662:header-args+: :tangle ~/.config/rofi/config
3663:END:
3664
3665#+begin_src conf
1f2bc66e 3666! rofi.font: Ubuntu Mono 13
2f1dcf9d
AB
3667! rofi.font: Inconsolata 16
3668! rofi.font: Iosevka 13
3669! rofi.font: Source Code Pro 11
1f2bc66e 3670rofi.font: Source Code Pro 10.5
2f1dcf9d
AB
3671rofi.modi: run,window
3672! rofi.width: 640
3673rofi.width: 600
3674!rofi.location: 2
3675!rofi.yoffset: 200
3676rofi.monitor: -1
3677!rofi.lines: 10
3678
3679!rofi.theme: /usr/share/rofi/themes//Arc.rasi
3680!rofi.theme: /usr/share/rofi/themes//Paper.rasi
3681!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3682
3683rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3684#+end_src
3685
3686** rofi-pass
3687:PROPERTIES:
3688:header-args+: :tangle ~/.config/rofi-pass/config
3689:END:
3690
3691#+begin_src conf
3692# permanently set alternative root dir
3693# root=/path/to/root
3694
3695# rofi command. Make sure to have "$@" as last argument
3696_rofi () {
3697 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
61f337f4 3698 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
2f1dcf9d
AB
3699}
3700
3701# xdotool needs the keyboard layout to be set using setxkbmap
3702# You can do this in your autostart scripts (e.g. xinitrc)
3703
3704# If for some reason, you cannot do this, you can set the command here.
3705# and set fix_layout to true
3706fix_layout=false
3707
3708layout_cmd () {
3709 setxkbmap us
3710}
3711
3712# fields to be used
3713URL_field='url'
3714USERNAME_field='user'
3715AUTOTYPE_field='autotype'
3716
3717# delay to be used for :delay keyword
3718delay=2
3719
3720## Programs to be used
3721# Editor
3722EDITOR='gvim -f'
3723
3724# Browser
3725BROWSER='chromium'
3726
3727## Misc settings
3728
3729default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3730auto_enter='false'
3731notify='false'
3732default_autotype='user :tab pass'
3733
3734# color of the help messages
3735# leave empty for autodetection
3736help_color="#4872FF"
3737
3738# Clipboard settings
3739# Possible options: primary, clipboard, both
3740clip=primary
3741
3742# Options for generating new password entries
3743# default_user is also used for password files that have no user field.
3744default_user=aminb
3745default_user2=aminban
3746password_length=30
3747
3748# Custom Keybindings
3749#autotype="Alt+1"
3750autotype="Alt+m"
3751type_user="Alt+2"
3752type_pass="Alt+3"
3753open_url="Alt+4"
3754copy_name="Alt+u"
3755copy_url="Alt+l"
3756copy_pass="Alt+p"
3757show="Alt+o"
3758copy_entry="Alt+2"
3759type_entry="Alt+1"
3760copy_menu="Alt+c"
3761action_menu="Alt+a"
3762type_menu="Alt+t"
3763help="Alt+h"
3764switch="Alt+x"
3765insert_pass="Alt+n"
3766#+end_src
3767
fb52d1f9 3768** sway
5b09427d
AB
3769
3770*** main
fb52d1f9
AB
3771:PROPERTIES:
3772:header-args+: :tangle ~/.config/sway/config
3773:END:
3774
3775#+begin_src conf
fb52d1f9 3776### Variables
373851f8 3777# super
fb52d1f9 3778set $mod Mod4
373851f8
AB
3779# alt
3780set $mod2 Mod1
fb52d1f9
AB
3781set $left h
3782set $down j
3783set $up k
3784set $right l
fb52d1f9 3785set $term urxvt
d6cb3a4a 3786set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
fb52d1f9
AB
3787
3788### Output configuration
3789#
3790# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3791output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3792#
3793# Example configuration:
3794#
3795# output HDMI-A-1 resolution 1920x1080 position 1920,0
3796#
3797# You can get the names of your outputs by running: swaymsg -t get_outputs
3798
3799### Idle configuration
ad65bea0
AB
3800
3801exec swayidle \
405e14e9
AB
3802 timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
3803 resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
ad65bea0 3804 before-sleep swaylock
fb52d1f9 3805
fb52d1f9
AB
3806
3807### Key bindings
3808#
3809# Basics:
3810#
3811 # start a terminal
3812 bindsym $mod+Return exec $term
3813
3814 # kill focused window
3815 bindsym $mod+Shift+q kill
3816
3817 # start your launcher
3818 bindsym $mod+d exec $menu
3819
40085087 3820 # password manager
71668c89 3821 bindsym $mod2+space exec rofi-pass
40085087 3822
fb52d1f9
AB
3823 # Drag floating windows by holding down $mod and left mouse button.
3824 # Resize them with right mouse button + $mod.
b41bfb27
AB
3825 # Despite the name, also works for non-floating windows.
3826 # Change normal to inverse to use left mouse button for resizing and right
3827 # mouse button for dragging.
3828 floating_modifier $mod normal
fb52d1f9
AB
3829
3830 # reload the configuration file
3831 bindsym $mod+Shift+c reload
3832
3833 # exit sway (logs you out of your wayland session)
3834 bindsym $mod+Shift+e exit
d6cb3a4a
AB
3835
3836 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3837 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3838 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3839
8e4862e2
AB
3840 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3841 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3842 bindsym XF86AudioMute exec pamixer --toggle-mute
3843 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3844
373851f8 3845 # original sway workspace switch and window move
1e3c1c15
AB
3846 bindsym $mod+bracketleft workspace prev
3847 bindsym $mod+bracketright workspace next
3848 bindsym $mod+braceleft move container to workspace prev
3849 bindsym $mod+braceright move container to workspace next
3850
3851 # bspwm-esque workspace switch and window move
3852 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3853 bindsym $mod2+bracketright exec sway-ws-util switch next
3854 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3855 bindsym $mod2+braceright exec sway-ws-util move next follow
fb52d1f9
AB
3856#
3857# Moving around:
3858#
3859 # Move your focus around
3860 bindsym $mod+$left focus left
3861 bindsym $mod+$down focus down
3862 bindsym $mod+$up focus up
3863 bindsym $mod+$right focus right
3864 # or use $mod+[up|down|left|right]
3865 bindsym $mod+Left focus left
3866 bindsym $mod+Down focus down
3867 bindsym $mod+Up focus up
3868 bindsym $mod+Right focus right
3869
3870 # _move_ the focused window with the same, but add Shift
3871 bindsym $mod+Shift+$left move left
3872 bindsym $mod+Shift+$down move down
3873 bindsym $mod+Shift+$up move up
3874 bindsym $mod+Shift+$right move right
3875 # ditto, with arrow keys
3876 bindsym $mod+Shift+Left move left
3877 bindsym $mod+Shift+Down move down
3878 bindsym $mod+Shift+Up move up
3879 bindsym $mod+Shift+Right move right
3880#
3881# Workspaces:
3882#
3883 # switch to workspace
3884 bindsym $mod+1 workspace 1
3885 bindsym $mod+2 workspace 2
3886 bindsym $mod+3 workspace 3
3887 bindsym $mod+4 workspace 4
3888 bindsym $mod+5 workspace 5
3889 bindsym $mod+6 workspace 6
3890 bindsym $mod+7 workspace 7
3891 bindsym $mod+8 workspace 8
3892 bindsym $mod+9 workspace 9
3893 bindsym $mod+0 workspace 10
3894 # move focused container to workspace
3895 bindsym $mod+Shift+1 move container to workspace 1
3896 bindsym $mod+Shift+2 move container to workspace 2
3897 bindsym $mod+Shift+3 move container to workspace 3
3898 bindsym $mod+Shift+4 move container to workspace 4
3899 bindsym $mod+Shift+5 move container to workspace 5
3900 bindsym $mod+Shift+6 move container to workspace 6
3901 bindsym $mod+Shift+7 move container to workspace 7
3902 bindsym $mod+Shift+8 move container to workspace 8
3903 bindsym $mod+Shift+9 move container to workspace 9
3904 bindsym $mod+Shift+0 move container to workspace 10
3905 # Note: workspaces can have any name you want, not just numbers.
3906 # We just use 1-10 as the default.
3907#
3908# Layout stuff:
3909#
3910 # You can "split" the current object of your focus with
3911 # $mod+b or $mod+v, for horizontal and vertical splits
3912 # respectively.
3913 bindsym $mod+b splith
3914 bindsym $mod+v splitv
3915
3916 # Switch the current container between different layout styles
3917 bindsym $mod+s layout stacking
3918 bindsym $mod+w layout tabbed
3919 bindsym $mod+e layout toggle split
3920
3921 # Make the current focus fullscreen
3922 bindsym $mod+f fullscreen
3923
3924 # Toggle the current focus between tiling and floating mode
3925 bindsym $mod+Shift+space floating toggle
3926
3927 # Swap focus between the tiling area and the floating area
3928 bindsym $mod+space focus mode_toggle
3929
3930 # move focus to the parent container
3931 bindsym $mod+a focus parent
3932#
3933# Scratchpad:
3934#
3935 # Sway has a "scratchpad", which is a bag of holding for windows.
3936 # You can send windows there and get them back later.
3937
3938 # Move the currently focused window to the scratchpad
3939 bindsym $mod+Shift+minus move scratchpad
3940
3941 # Show the next scratchpad window or hide the focused scratchpad window.
3942 # If there are multiple scratchpad windows, this command cycles through them.
3943 bindsym $mod+minus scratchpad show
3944#
3945# Resizing containers:
3946#
3947mode "resize" {
3948 # left will shrink the containers width
3949 # right will grow the containers width
3950 # up will shrink the containers height
3951 # down will grow the containers height
3952 bindsym $left resize shrink width 10px
3953 bindsym $down resize grow height 10px
3954 bindsym $up resize shrink height 10px
3955 bindsym $right resize grow width 10px
3956
3957 # ditto, with arrow keys
3958 bindsym Left resize shrink width 10px
3959 bindsym Down resize grow height 10px
3960 bindsym Up resize shrink height 10px
3961 bindsym Right resize grow width 10px
3962
3963 # return to default mode
3964 bindsym Return mode "default"
3965 bindsym Escape mode "default"
3966}
eb186a5a 3967bindsym $mod+Shift+r mode "resize"
fb52d1f9 3968
11a97c68
AB
3969#
3970# Power button
3971#
11a97c68
AB
3972
3973set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
3974mode "$mode_system" {
93f6bf1a
AB
3975 bindsym l exec swaylock, mode "default"
3976 bindsym e exec swaymsg exit, mode "default"
3977 bindsym s exec systemctl suspend, mode "default"
3978 bindsym h exec systemctl hibernate, mode "default"
3979 bindsym r exec systemctl reboot, mode "default"
3980 bindsym Shift+s exec systemctl poweroff -i, mode "default"
11a97c68
AB
3981
3982 # back to normal: Enter, Escape, or q
3983 bindsym Return mode "default"
3984 bindsym Escape mode "default"
3985 bindsym q mode "default"
3986}
3987bindsym XF86PowerOff mode "$mode_system"
3988
405e14e9
AB
3989#
3990# Presentation mode
3991#
3992
9455bb8f 3993bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
405e14e9 3994
ff3efe94
AB
3995#
3996# Notifications
3997#
3998
3999bindsym $mod+Shift+n mode notifications
4000mode notifications {
4001 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
4002 bindsym d exec makoctl dismiss; mode default
4003 bindsym Shift+d exec makoctl dismiss -a; mode default
4004
4005 bindsym Escape mode default
4006 bindsym q mode default
4007}
4008
4009#
4010# Screenshotting
4011#
4012
4013bindsym $mod+Shift+s mode screenshot
4014mode screenshot {
4015 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4016 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4017
4018 bindsym Escape mode default
4019 bindsym q mode default
4020}
4021
fb52d1f9
AB
4022#
4023# Status Bar:
4024#
4025# Read `man 5 sway-bar` for more information about this section.
4026bar {
d6cb3a4a 4027 position bottom
fb52d1f9
AB
4028 colors {
4029 statusline #ffffff
4030 background #323232
4031 inactive_workspace #32323200 #32323200 #5c5c5c
4032 }
9455bb8f 4033 status_command i3status | my-i3status.py
fb52d1f9
AB
4034}
4035
e32b3547 4036# font pango: benis uushi 9
ffdd4956
AB
4037# font pango: Ubuntu Mono 11
4038# font pango: Inconsolata 11
4039font pango: DejaVu Sans Mono 9
4040# font pango: Liberation Mono 9
e32b3547 4041
ff3efe94
AB
4042exec xrdb .Xresources
4043exec pgrep -x "systemd-inhibit" || \
4044 systemd-inhibit --what=handle-power-key --who=aminb \
4045 --why="Handle power button in sway" sleep infinity
4046exec mako 2>&1 >/tmp/mako.log
4047exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4048
fb52d1f9 4049include /etc/sway/config.d/*
5b09427d
AB
4050include ~/.config/sway/`hostname`
4051
ff3efe94
AB
4052exec systemd-notify --ready || true
4053
5b09427d
AB
4054#+end_src
4055
4056*** langa
4057:PROPERTIES:
4058:header-args+: :tangle ~/.config/sway/langa
4059:END:
4060
4061#+begin_src conf
4062input "2:7:SynPS/2_Synaptics_TouchPad" {
4063 events disabled
4064 dwt enabled
4065 tap enabled
4066 natural_scroll enabled
4067 click_method clickfinger
4068}
4069
4070input "1:1:AT_Translated_Set_2_keyboard" {
4071 repeat_delay 200
4072 repeat_rate 45
4073 xkb_layout us_ab,ir
4074 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4075}
fb52d1f9
AB
4076#+end_src
4077
5b09427d
AB
4078*** shemshak
4079:PROPERTIES:
4080:header-args+: :tangle ~/.config/sway/shemshak
4081:END:
4082
4083#+begin_src conf
4084input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4085 dwt enabled
4086 tap enabled
4087 natural_scroll enabled
4088 middle_emulation enabled
4089 click_method clickfinger
4090}
4091
4092input "1:1:AT_Translated_Set_2_keyboard" {
4093 repeat_delay 200
4094 repeat_rate 45
4095 xkb_layout us,ir
4096 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4097}
4098#+end_src
ad65bea0
AB
4099** swaylock
4100:PROPERTIES:
4101:header-args+: :tangle ~/.config/swaylock/config
4102:END:
4103
4104#+begin_src conf
4105image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4106scaling=fill
4107#+end_src
4108
08e87a0a
AB
4109** TLP
4110
d7144515
AB
4111*** langa
4112
4113#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4114# ------------------------------------------------------------------------------
4115# tlp - Parameters for power saving
4116# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4117
4118# Hint: some features are disabled by default, remove the leading # to enable
4119# them.
4120
4121# Set to 0 to disable, 1 to enable TLP.
4122TLP_ENABLE=1
4123
4124# Operation mode when no power supply can be detected: AC, BAT.
4125# Concerns some desktop and embedded hardware only.
4126TLP_DEFAULT_MODE=AC
4127
4128# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4129# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4130TLP_PERSISTENT_DEFAULT=0
4131
4132# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4133# Non-zero value enables, zero disables laptop mode.
4134DISK_IDLE_SECS_ON_AC=0
4135DISK_IDLE_SECS_ON_BAT=2
4136
4137# Dirty page values (timeouts in secs).
4138MAX_LOST_WORK_SECS_ON_AC=15
4139MAX_LOST_WORK_SECS_ON_BAT=60
4140
4141# Hint: CPU parameters below are disabled by default, remove the leading #
4142# to enable them, otherwise kernel default values are used.
4143
4144# Select a CPU frequency scaling governor.
4145# Intel Core i processor with intel_pstate driver:
4146# powersave(*), performance.
4147# Older hardware with acpi-cpufreq driver:
4148# ondemand(*), powersave, performance, conservative, schedutil.
4149# (*) is recommended.
4150# Hint: use tlp-stat -p to show the active driver and available governors.
4151# Important:
4152# powersave for intel_pstate and ondemand for acpi-cpufreq are power
4153# efficient for *almost all* workloads and therefore kernel and most
4154# distributions have chosen them as defaults. If you still want to change,
4155# you should know what you're doing! You *must* disable your distribution's
4156# governor settings or conflicts will occur.
4157#CPU_SCALING_GOVERNOR_ON_AC=powersave
4158#CPU_SCALING_GOVERNOR_ON_BAT=powersave
4159
4160# Set the min/max frequency available for the scaling governor.
4161# Possible values strongly depend on your CPU. For available frequencies see
4162# the output of tlp-stat -p.
4163#CPU_SCALING_MIN_FREQ_ON_AC=0
4164#CPU_SCALING_MAX_FREQ_ON_AC=0
4165#CPU_SCALING_MIN_FREQ_ON_BAT=0
4166#CPU_SCALING_MAX_FREQ_ON_BAT=0
4167
4168# Set energy performance hints (HWP) for Intel P-state governor:
4169# performance, balance_performance, default, balance_power, power
4170# Values are given in order of increasing power saving.
4171# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4172CPU_HWP_ON_AC=balance_performance
4173CPU_HWP_ON_BAT=balance_power
4174
4175# Set Intel P-state performance: 0..100 (%).
4176# Limit the max/min P-state to control the power dissipation of the CPU.
4177# Values are stated as a percentage of the available performance.
4178# Requires an Intel Core i processor with intel_pstate driver.
4179#CPU_MIN_PERF_ON_AC=0
4180#CPU_MAX_PERF_ON_AC=100
4181#CPU_MIN_PERF_ON_BAT=0
4182#CPU_MAX_PERF_ON_BAT=30
4183
4184# Set the CPU "turbo boost" feature: 0=disable, 1=allow
4185# Requires an Intel Core i processor.
4186# Important:
4187# - This may conflict with your distribution's governor settings
4188# - A value of 1 does *not* activate boosting, it just allows it
4189#CPU_BOOST_ON_AC=1
4190#CPU_BOOST_ON_BAT=0
4191
4192# Minimize number of used CPU cores/hyper-threads under light load conditions:
4193# 0=disable, 1=enable.
4194SCHED_POWERSAVE_ON_AC=0
4195SCHED_POWERSAVE_ON_BAT=1
4196
4197# Kernel NMI Watchdog:
4198# 0=disable (default, saves power), 1=enable (for kernel debugging only).
4199NMI_WATCHDOG=0
4200
4201# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4202# Frequency voltage pairs are written to:
4203# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4204# CAUTION: only use this, if you thoroughly understand what you are doing!
4205#PHC_CONTROLS="F:V F:V F:V F:V"
4206
4207# Set CPU performance versus energy savings policy:
4208# performance, balance-performance, default, balance-power, power.
4209# Values are given in order of increasing power saving.
4210# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4211ENERGY_PERF_POLICY_ON_AC=performance
4212ENERGY_PERF_POLICY_ON_BAT=balance-power
4213
4214# Disk devices; separate multiple devices with spaces (default: sda).
4215# Devices can be specified by disk ID also (lookup with: tlp diskid).
4216DISK_DEVICES="sda sdb"
4217
4218# Disk advanced power management level: 1..254, 255 (max saving, min, off).
4219# Levels 1..127 may spin down the disk; 255 allowable on most drives.
4220# Separate values for multiple disks with spaces. Use the special value 'keep'
4221# to keep the hardware default for the particular disk.
4222DISK_APM_LEVEL_ON_AC="254 254"
4223DISK_APM_LEVEL_ON_BAT="128 128"
4224
4225# Hard disk spin down timeout:
4226# 0: spin down disabled
4227# 1..240: timeouts from 5s to 20min (in units of 5s)
4228# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4229# See 'man hdparm' for details.
4230# Separate values for multiple disks with spaces. Use the special value 'keep'
4231# to keep the hardware default for the particular disk.
4232#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4233#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4234
4235# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4236# Separate values for multiple disks with spaces. Use the special value 'keep'
4237# to keep the kernel default scheduler for the particular disk.
4238#DISK_IOSCHED="cfq cfq"
4239
4240# AHCI link power management (ALPM) for disk devices:
4241# min_power, med_power_with_dipm(*), medium_power, max_performance.
4242# (*) Kernel >= 4.15 required, then recommended.
4243# Multiple values separated with spaces are tried sequentially until success.
4244SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4245SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4246
4247# Exclude host devices from AHCI link power management.
4248# Separate multiple hosts with spaces.
4249#SATA_LINKPWR_BLACKLIST="host1"
4250
4251# Runtime Power Management for AHCI host and disks devices:
4252# on=disable, auto=enable.
4253# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4254#AHCI_RUNTIME_PM_ON_AC=on
4255#AHCI_RUNTIME_PM_ON_BAT=on
4256
4257# Seconds of inactivity before disk is suspended.
4258AHCI_RUNTIME_PM_TIMEOUT=15
4259
4260# PCI Express Active State Power Management (PCIe ASPM):
4261# default, performance, powersave.
4262PCIE_ASPM_ON_AC=performance
4263PCIE_ASPM_ON_BAT=powersave
4264
4265# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4266# auto = mid on BAT, high on AC; default = use hardware defaults.
4267RADEON_POWER_PROFILE_ON_AC=high
4268RADEON_POWER_PROFILE_ON_BAT=low
4269
4270# Radeon dynamic power management method (DPM): battery, performance.
4271RADEON_DPM_STATE_ON_AC=performance
4272RADEON_DPM_STATE_ON_BAT=battery
4273
4274# Radeon DPM performance level: auto, low, high; auto is recommended.
4275RADEON_DPM_PERF_LEVEL_ON_AC=auto
4276RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4277
4278# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4279WIFI_PWR_ON_AC=off
4280WIFI_PWR_ON_BAT=on
4281
4282# Disable wake on LAN: Y/N.
4283WOL_DISABLE=Y
4284
4285# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4286# A value of 0 disables, >=1 enables power saving (recommended: 1).
4287SOUND_POWER_SAVE_ON_AC=0
4288SOUND_POWER_SAVE_ON_BAT=0
4289
4290# Disable controller too (HDA only): Y/N.
4291SOUND_POWER_SAVE_CONTROLLER=N
4292
4293# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4294# Drive can be powered on again by releasing (and reinserting) the eject lever
4295# or by pressing the disc eject button on newer models.
4296# Note: an UltraBay/MediaBay hard disk is never powered off.
4297BAY_POWEROFF_ON_AC=0
4298BAY_POWEROFF_ON_BAT=0
4299# Optical drive device to power off (default sr0).
4300BAY_DEVICE="sr0"
4301
4302# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4303RUNTIME_PM_ON_AC=on
4304RUNTIME_PM_ON_BAT=auto
4305
4306# Exclude PCI(e) device adresses the following list from Runtime PM
4307# (separate with spaces). Use lspci to get the adresses (1st column).
4308#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4309
4310# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4311# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4312# prevents accidential power-on of dGPU in hybrid graphics setups.
4313# Use "" to disable the feature completely.
4314# Separate multiple drivers with spaces.
4315#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4316
4317# Set to 0 to disable, 1 to enable USB autosuspend feature.
4318USB_AUTOSUSPEND=1
4319
4320# Exclude listed devices from USB autosuspend (separate with spaces).
4321# Use lsusb to get the ids.
4322# Note: input devices (usbhid) are excluded automatically
4323#USB_BLACKLIST="1111:2222 3333:4444"
4324
4325# Bluetooth devices are excluded from USB autosuspend:
4326# 0=do not exclude, 1=exclude.
4327USB_BLACKLIST_BTUSB=0
4328
4329# Phone devices are excluded from USB autosuspend:
4330# 0=do not exclude, 1=exclude (enable charging).
4331USB_BLACKLIST_PHONE=0
4332
4333# Printers are excluded from USB autosuspend:
4334# 0=do not exclude, 1=exclude.
4335USB_BLACKLIST_PRINTER=1
4336
4337# WWAN devices are excluded from USB autosuspend:
4338# 0=do not exclude, 1=exclude.
4339USB_BLACKLIST_WWAN=1
4340
4341# Include listed devices into USB autosuspend even if already excluded
4342# by the blacklists above (separate with spaces).
4343# Use lsusb to get the ids.
4344#USB_WHITELIST="1111:2222 3333:4444"
4345
4346# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4347# (workaround for USB devices that cause shutdown problems).
4348#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4349
4350# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4351# on system startup: 0=disable, 1=enable.
4352# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4353# are ignored when this is enabled!
4354#RESTORE_DEVICE_STATE_ON_STARTUP=0
67023528 4355RESTORE_DEVICE_STATE_ON_STARTUP=0
d7144515
AB
4356
4357# Radio devices to disable on startup: bluetooth, wifi, wwan.
4358# Separate multiple devices with spaces.
4359#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
67023528 4360DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
d7144515
AB
4361
4362# Radio devices to enable on startup: bluetooth, wifi, wwan.
4363# Separate multiple devices with spaces.
4364#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4365
4366# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4367# (workaround for devices that are blocking shutdown).
4368#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4369
4370# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4371# (to prevent other operating systems from missing radios).
4372#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4373
4374# Radio devices to enable on AC: bluetooth, wifi, wwan.
4375#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4376
4377# Radio devices to disable on battery: bluetooth, wifi, wwan.
4378#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4379
4380# Radio devices to disable on battery when not in use (not connected):
4381# bluetooth, wifi, wwan.
4382#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4383
4384# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4385# required). Charging starts when the remaining capacity falls below the
4386# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4387# Main / Internal battery (values in %)
4388#START_CHARGE_THRESH_BAT0=75
4389#STOP_CHARGE_THRESH_BAT0=80
4390# Ultrabay / Slice / Replaceable battery (values in %)
4391#START_CHARGE_THRESH_BAT1=75
4392#STOP_CHARGE_THRESH_BAT1=80
4393
4394# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4395#RESTORE_THRESHOLDS_ON_BAT=1
4396
4397# ------------------------------------------------------------------------------
4398# tlp-rdw - Parameters for the radio device wizard
4399# Possible devices: bluetooth, wifi, wwan.
4400
4401# Hints:
4402# - Parameters are disabled by default, remove the leading # to enable them
4403# - Separate multiple radio devices with spaces
4404
4405# Radio devices to disable on connect.
4406#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4407#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4408#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4409
4410# Radio devices to enable on disconnect.
4411#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4412#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4413#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4414
4415# Radio devices to enable/disable when docked.
4416#DEVICES_TO_ENABLE_ON_DOCK=""
4417#DEVICES_TO_DISABLE_ON_DOCK=""
4418
4419# Radio devices to enable/disable when undocked.
4420#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4421#DEVICES_TO_DISABLE_ON_UNDOCK=""
4422#+end_src
4423
0d78df2f 4424*** shemshak
08e87a0a 4425
0d78df2f 4426#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
08e87a0a
AB
4427# ------------------------------------------------------------------------------
4428# tlp - Parameters for power saving
4429# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4430
4431# Hint: some features are disabled by default, remove the leading # to enable
4432# them.
4433
4434# Set to 0 to disable, 1 to enable TLP.
4435TLP_ENABLE=1
4436
4437# Operation mode when no power supply can be detected: AC, BAT.
4438# Concerns some desktop and embedded hardware only.
4439TLP_DEFAULT_MODE=AC
4440
4441# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4442# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4443TLP_PERSISTENT_DEFAULT=0
4444
4445# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4446# Non-zero value enables, zero disables laptop mode.
4447DISK_IDLE_SECS_ON_AC=0
4448DISK_IDLE_SECS_ON_BAT=2
4449
4450# Dirty page values (timeouts in secs).
4451MAX_LOST_WORK_SECS_ON_AC=15
4452MAX_LOST_WORK_SECS_ON_BAT=60
4453
4454# Hint: CPU parameters below are disabled by default, remove the leading #
4455# to enable them, otherwise kernel default values are used.
4456
4457# Select a CPU frequency scaling governor.
4458# Intel Core i processor with intel_pstate driver:
4459# powersave(*), performance.
4460# Older hardware with acpi-cpufreq driver:
4461# ondemand(*), powersave, performance, conservative, schedutil.
4462# (*) is recommended.
4463# Hint: use tlp-stat -p to show the active driver and available governors.
4464# Important:
4465# powersave for intel_pstate and ondemand for acpi-cpufreq are power
4466# efficient for *almost all* workloads and therefore kernel and most
4467# distributions have chosen them as defaults. If you still want to change,
4468# you should know what you're doing! You *must* disable your distribution's
4469# governor settings or conflicts will occur.
4470#CPU_SCALING_GOVERNOR_ON_AC=powersave
4471#CPU_SCALING_GOVERNOR_ON_BAT=powersave
4472
4473# Set the min/max frequency available for the scaling governor.
4474# Possible values strongly depend on your CPU. For available frequencies see
4475# the output of tlp-stat -p.
4476#CPU_SCALING_MIN_FREQ_ON_AC=0
4477#CPU_SCALING_MAX_FREQ_ON_AC=0
4478#CPU_SCALING_MIN_FREQ_ON_BAT=0
4479#CPU_SCALING_MAX_FREQ_ON_BAT=0
4480
4481# Set energy performance hints (HWP) for Intel P-state governor:
4482# performance, balance_performance, default, balance_power, power
4483# Values are given in order of increasing power saving.
4484# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4485CPU_HWP_ON_AC=balance_performance
4486CPU_HWP_ON_BAT=balance_power
4487
4488# Set Intel P-state performance: 0..100 (%).
4489# Limit the max/min P-state to control the power dissipation of the CPU.
4490# Values are stated as a percentage of the available performance.
4491# Requires an Intel Core i processor with intel_pstate driver.
4492#CPU_MIN_PERF_ON_AC=0
4493#CPU_MAX_PERF_ON_AC=100
4494#CPU_MIN_PERF_ON_BAT=0
4495#CPU_MAX_PERF_ON_BAT=30
4496
4497# Set the CPU "turbo boost" feature: 0=disable, 1=allow
4498# Requires an Intel Core i processor.
4499# Important:
4500# - This may conflict with your distribution's governor settings
4501# - A value of 1 does *not* activate boosting, it just allows it
4502#CPU_BOOST_ON_AC=1
4503#CPU_BOOST_ON_BAT=0
4504
4505# Minimize number of used CPU cores/hyper-threads under light load conditions:
4506# 0=disable, 1=enable.
4507SCHED_POWERSAVE_ON_AC=0
4508SCHED_POWERSAVE_ON_BAT=1
4509
4510# Kernel NMI Watchdog:
4511# 0=disable (default, saves power), 1=enable (for kernel debugging only).
4512NMI_WATCHDOG=0
4513
4514# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4515# Frequency voltage pairs are written to:
4516# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4517# CAUTION: only use this, if you thoroughly understand what you are doing!
4518#PHC_CONTROLS="F:V F:V F:V F:V"
4519
4520# Set CPU performance versus energy savings policy:
4521# performance, balance-performance, default, balance-power, power.
4522# Values are given in order of increasing power saving.
4523# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4524ENERGY_PERF_POLICY_ON_AC=performance
4525ENERGY_PERF_POLICY_ON_BAT=balance-power
4526
4527# Disk devices; separate multiple devices with spaces (default: sda).
4528# Devices can be specified by disk ID also (lookup with: tlp diskid).
4529DISK_DEVICES="sda sdb"
4530
4531# Disk advanced power management level: 1..254, 255 (max saving, min, off).
4532# Levels 1..127 may spin down the disk; 255 allowable on most drives.
4533# Separate values for multiple disks with spaces. Use the special value 'keep'
4534# to keep the hardware default for the particular disk.
4535DISK_APM_LEVEL_ON_AC="254 254"
4536DISK_APM_LEVEL_ON_BAT="128 128"
4537
4538# Hard disk spin down timeout:
4539# 0: spin down disabled
4540# 1..240: timeouts from 5s to 20min (in units of 5s)
4541# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4542# See 'man hdparm' for details.
4543# Separate values for multiple disks with spaces. Use the special value 'keep'
4544# to keep the hardware default for the particular disk.
4545#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4546#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4547
4548# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4549# Separate values for multiple disks with spaces. Use the special value 'keep'
4550# to keep the kernel default scheduler for the particular disk.
4551#DISK_IOSCHED="cfq cfq"
4552
4553# AHCI link power management (ALPM) for disk devices:
4554# min_power, med_power_with_dipm(*), medium_power, max_performance.
4555# (*) Kernel >= 4.15 required, then recommended.
4556# Multiple values separated with spaces are tried sequentially until success.
4557SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4558SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4559
4560# Exclude host devices from AHCI link power management.
4561# Separate multiple hosts with spaces.
4562#SATA_LINKPWR_BLACKLIST="host1"
4563
4564# Runtime Power Management for AHCI host and disks devices:
4565# on=disable, auto=enable.
4566# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4567#AHCI_RUNTIME_PM_ON_AC=on
4568#AHCI_RUNTIME_PM_ON_BAT=on
4569
4570# Seconds of inactivity before disk is suspended.
4571AHCI_RUNTIME_PM_TIMEOUT=15
4572
4573# PCI Express Active State Power Management (PCIe ASPM):
4574# default, performance, powersave.
4575PCIE_ASPM_ON_AC=performance
4576PCIE_ASPM_ON_BAT=powersave
4577
4578# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4579# auto = mid on BAT, high on AC; default = use hardware defaults.
4580RADEON_POWER_PROFILE_ON_AC=high
4581RADEON_POWER_PROFILE_ON_BAT=low
4582
4583# Radeon dynamic power management method (DPM): battery, performance.
4584RADEON_DPM_STATE_ON_AC=performance
4585RADEON_DPM_STATE_ON_BAT=battery
4586
4587# Radeon DPM performance level: auto, low, high; auto is recommended.
4588RADEON_DPM_PERF_LEVEL_ON_AC=auto
4589RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4590
4591# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4592WIFI_PWR_ON_AC=off
4593WIFI_PWR_ON_BAT=on
4594
4595# Disable wake on LAN: Y/N.
4596WOL_DISABLE=Y
4597
4598# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4599# A value of 0 disables, >=1 enables power saving (recommended: 1).
4600SOUND_POWER_SAVE_ON_AC=0
4601SOUND_POWER_SAVE_ON_BAT=0
4602
4603# Disable controller too (HDA only): Y/N.
4604SOUND_POWER_SAVE_CONTROLLER=N
4605
4606# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4607# Drive can be powered on again by releasing (and reinserting) the eject lever
4608# or by pressing the disc eject button on newer models.
4609# Note: an UltraBay/MediaBay hard disk is never powered off.
4610BAY_POWEROFF_ON_AC=0
4611BAY_POWEROFF_ON_BAT=0
4612# Optical drive device to power off (default sr0).
4613BAY_DEVICE="sr0"
4614
4615# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4616RUNTIME_PM_ON_AC=on
4617RUNTIME_PM_ON_BAT=auto
4618
4619# Exclude PCI(e) device adresses the following list from Runtime PM
4620# (separate with spaces). Use lspci to get the adresses (1st column).
4621#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4622RUNTIME_PM_BLACKLIST="01:00.0"
4623
4624# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4625# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4626# prevents accidential power-on of dGPU in hybrid graphics setups.
4627# Use "" to disable the feature completely.
4628# Separate multiple drivers with spaces.
4629#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4630
4631# Set to 0 to disable, 1 to enable USB autosuspend feature.
4632USB_AUTOSUSPEND=1
4633
4634# Exclude listed devices from USB autosuspend (separate with spaces).
4635# Use lsusb to get the ids.
4636# Note: input devices (usbhid) are excluded automatically
4637#USB_BLACKLIST="1111:2222 3333:4444"
4638
4639# Bluetooth devices are excluded from USB autosuspend:
4640# 0=do not exclude, 1=exclude.
4641USB_BLACKLIST_BTUSB=0
4642
4643# Phone devices are excluded from USB autosuspend:
4644# 0=do not exclude, 1=exclude (enable charging).
4645USB_BLACKLIST_PHONE=0
4646
4647# Printers are excluded from USB autosuspend:
4648# 0=do not exclude, 1=exclude.
4649USB_BLACKLIST_PRINTER=1
4650
4651# WWAN devices are excluded from USB autosuspend:
4652# 0=do not exclude, 1=exclude.
4653USB_BLACKLIST_WWAN=1
4654
4655# Include listed devices into USB autosuspend even if already excluded
4656# by the blacklists above (separate with spaces).
4657# Use lsusb to get the ids.
4658#USB_WHITELIST="1111:2222 3333:4444"
4659
4660# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4661# (workaround for USB devices that cause shutdown problems).
4662#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4663
4664# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4665# on system startup: 0=disable, 1=enable.
4666# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4667# are ignored when this is enabled!
4668#RESTORE_DEVICE_STATE_ON_STARTUP=0
4669RESTORE_DEVICE_STATE_ON_STARTUP=1
4670
4671# Radio devices to disable on startup: bluetooth, wifi, wwan.
4672# Separate multiple devices with spaces.
4673#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4674
4675# Radio devices to enable on startup: bluetooth, wifi, wwan.
4676# Separate multiple devices with spaces.
4677#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4678
4679# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4680# (workaround for devices that are blocking shutdown).
4681#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4682
4683# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4684# (to prevent other operating systems from missing radios).
4685#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4686
4687# Radio devices to enable on AC: bluetooth, wifi, wwan.
4688#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4689
4690# Radio devices to disable on battery: bluetooth, wifi, wwan.
4691#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4692
4693# Radio devices to disable on battery when not in use (not connected):
4694# bluetooth, wifi, wwan.
4695#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4696
4697# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4698# required). Charging starts when the remaining capacity falls below the
4699# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4700# Main / Internal battery (values in %)
4701#START_CHARGE_THRESH_BAT0=75
4702#STOP_CHARGE_THRESH_BAT0=80
4703# Ultrabay / Slice / Replaceable battery (values in %)
4704#START_CHARGE_THRESH_BAT1=75
4705#STOP_CHARGE_THRESH_BAT1=80
4706
4707# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4708#RESTORE_THRESHOLDS_ON_BAT=1
4709
4710# ------------------------------------------------------------------------------
4711# tlp-rdw - Parameters for the radio device wizard
4712# Possible devices: bluetooth, wifi, wwan.
4713
4714# Hints:
4715# - Parameters are disabled by default, remove the leading # to enable them
4716# - Separate multiple radio devices with spaces
4717
4718# Radio devices to disable on connect.
4719#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4720#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4721#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4722
4723# Radio devices to enable on disconnect.
4724#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4725#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4726#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4727
4728# Radio devices to enable/disable when docked.
4729#DEVICES_TO_ENABLE_ON_DOCK=""
4730#DEVICES_TO_DISABLE_ON_DOCK=""
4731
4732# Radio devices to enable/disable when undocked.
4733#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4734#DEVICES_TO_DISABLE_ON_UNDOCK=""
4735#+end_src
4736
2e877d14
AB
4737** X
4738
4739*** xprofile
4740:PROPERTIES:
4741:header-args+: :tangle ~/.xprofile
4742:END:
4743
4744=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4745contrary, it's automatically sourced by LightDM, my display manager of
4746choice.
4747
fb52d1f9 4748#+begin_src sh :tangle no
6bab6a4a 4749xset -b # disable bell
b5208764 4750xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
6bab6a4a 4751
2e877d14
AB
4752# setxkbmap -option compose:ralt
4753
4754setxkbmap -option ctrl:nocaps # turn capslock into control
4755setxkbmap -option altwin:swap_alt_win # swap alt and super
4756
4757if [ $(hostname) = "plasma" ]
4758then
4759 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4760fi
4761
4762if [ $(hostname) = "enigma" ]
4763then
4764 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4765fi
4766
4767light -Scrs "intel_backlight" 2
4768
4769source $HOME/.zprofile
4770
4771export _JAVA_AWT_WM_NONREPARENTING=1
4772export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4773
2e877d14
AB
4774if [ $(hostname) = "plasma" ]
4775then
c0132386 4776 unlock-def-gk.py &
2e877d14 4777fi
c0132386
AB
4778
4779bspwm &
2e877d14
AB
4780#+end_src
4781
4782*** X resources
4783
4784**** Xresources
4785:PROPERTIES:
4786:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4787:END:
4788
4789#+begin_src conf-xdefaults
4790#include ".Xresources.d/fonts"
4791! #include ".Xresources.d/colors"
4792#include ".Xresources.d/emacs"
4793#include ".Xresources.d/rxvt-unicode"
4794#+end_src
4795
4796**** Xresources.d
4797
4798***** fonts
4799:PROPERTIES:
4800:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4801:END:
4802
4803#+begin_src conf-xdefaults
4804Xft.lcdfilter: lcddefault
4805Xft.antialias: true
4806Xft.autohint: 0
4807Xft.hinting: true
4808Xft.hintstyle: hintslight
4809! Xft.hintstyle: hintfull
4810Xft.rgba: rgb
4811Xft.dpi: 96
4812#+end_src
4813
4814***** colors
4815:PROPERTIES:
4816:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4817:END:
4818
4819#+begin_src conf-xdefaults :tangle no
4820#include "gruvbox-light.xresources"
4821! #include "gruvbox-dark.xresources"
4822#include "gruvbox-urxvt256.xresources"
4823#+end_src
4824
4825#+begin_src conf-xdefaults :tangle no
4826! -----------------------------------------------------------------------------
4827! File: gruvbox-light.xresources
4828! Description: Retro groove colorscheme generalized
4829! Author: morhetz <morhetz@gmail.com>
4830! Source: https://github.com/morhetz/gruvbox-generalized
4831! Last Modified: 6 Sep 2014
4832! -----------------------------------------------------------------------------
4833
4834! hard contrast: *background: #f9f5d7
4835*background: #fbf1c7
4836! soft contrast: *background: #f2e5bc
4837*foreground: #3c3836
4838! Black + DarkGrey
4839*color0: #fdf4c1
4840*color8: #928374
4841! DarkRed + Red
4842*color1: #cc241d
4843*color9: #9d0006
4844! DarkGreen + Green
4845*color2: #98971a
4846*color10: #79740e
4847! DarkYellow + Yellow
4848*color3: #d79921
4849*color11: #b57614
4850! DarkBlue + Blue
4851*color4: #458588
4852*color12: #076678
4853! DarkMagenta + Magenta
4854*color5: #b16286
4855*color13: #8f3f71
4856! DarkCyan + Cyan
4857*color6: #689d6a
4858*color14: #427b58
4859! LightGrey + White
4860*color7: #7c6f64
4861*color15: #3c3836
4862#+end_src
4863
4864#+begin_src conf-xdefaults :tangle no
4865! -----------------------------------------------------------------------------
4866! File: gruvbox-dark.xresources
4867! Description: Retro groove colorscheme generalized
4868! Author: morhetz <morhetz@gmail.com>
4869! Source: https://github.com/morhetz/gruvbox-generalized
4870! Last Modified: 6 Sep 2014
4871! -----------------------------------------------------------------------------
4872
4873! hard contrast: *background: #1d2021
4874*background: #282828
4875! soft contrast: *background: #32302f
4876*foreground: #ebdbb2
4877! Black + DarkGrey
4878*color0: #282828
4879*color8: #928374
4880! DarkRed + Red
4881*color1: #cc241d
4882*color9: #fb4934
4883! DarkGreen + Green
4884*color2: #98971a
4885*color10: #b8bb26
4886! DarkYellow + Yellow
4887*color3: #d79921
4888*color11: #fabd2f
4889! DarkBlue + Blue
4890*color4: #458588
4891*color12: #83a598
4892! DarkMagenta + Magenta
4893*color5: #b16286
4894*color13: #d3869b
4895! DarkCyan + Cyan
4896*color6: #689d6a
4897*color14: #8ec07c
4898! LightGrey + White
4899*color7: #a89984
4900*color15: #ebdbb2
4901#+end_src
4902
4903#+begin_src conf-xdefaults :tangle no
4904! -----------------------------------------------------------------------------
4905! File: gruvbox-urxvt256.xresources
4906! Description: Retro groove colorscheme generalized
4907! Author: morhetz <morhetz@gmail.com>
4908! Source: https://github.com/morhetz/gruvbox-generalized
4909! Last Modified: 13 Dec 2013
4910! -----------------------------------------------------------------------------
4911
4912URxvt.color24: #076678
4913URxvt.color66: #427b58
4914URxvt.color88: #9d0006
4915URxvt.color96: #8f3f71
4916URxvt.color100: #79740e
4917URxvt.color108: #8ec07c
4918URxvt.color109: #83a598
4919URxvt.color130: #af3a03
4920URxvt.color136: #b57614
4921URxvt.color142: #b8bb26
4922URxvt.color167: #fb4934
4923URxvt.color175: #d3869b
4924URxvt.color208: #fe8019
4925URxvt.color214: #fabd2f
4926URxvt.color223: #ebdbb2
4927URxvt.color228: #f2e5bc
4928URxvt.color229: #fbf1c7
4929URxvt.color230: #f9f5d7
4930URxvt.color234: #1d2021
4931URxvt.color235: #282828
4932URxvt.color236: #32302f
4933URxvt.color237: #3c3836
4934URxvt.color239: #504945
4935URxvt.color241: #665c54
4936URxvt.color243: #7c6f64
4937URxvt.color244: #928374
4938URxvt.color245: #928374
4939URxvt.color246: #a89984
4940URxvt.color248: #bdae93
4941URxvt.color250: #d5c4a1
4942#+end_src
4943
4944***** emacs
4945:PROPERTIES:
4946:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4947:END:
4948
4949#+begin_src conf-xdefaults
4950Emacs.menuBar: off
4951Emacs.toolBar: off
4952Emacs.verticalScrollBars: off
4953Emacs.cursorBlink: off
4954Emacs.FontBackend: xft,x
4955! Emacs.font: Ubuntu Mono-12
4956! Emacs.font: Triplicate T4C-11
4957! Emacs.font: Ubuntu Mono-10.5
4958! Emacs.font: Ubuntu Mono-12
4959! Emacs.font: Iosevka-11
4960
4961! Emacs.font: Fira Mono:size=15
4962! Emacs.font: DejaVu Sans Mono:size=15
4963! Emacs.font: Inconsolata:size=17
4964! Emacs.font: Inconsolata:size=16
4965! Emacs.font: Inconsolata LGC:size=14
4966! Emacs.font: Source Code Pro Medium-10.5
1f2bc66e
AB
4967Emacs.font: Source Code Pro:size=14
4968! Emacs.font: Ubuntu Mono:size=16
2e877d14
AB
4969! Emacs.font: Iosevka:size=16
4970#+end_src
4971
4972***** rxvt-unicode
4973:PROPERTIES:
4974:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4975:END:
4976
4977#+begin_src conf-xdefaults
4978! Font
1f2bc66e
AB
4979URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4980URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4981URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4982URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
2e877d14
AB
4983
4984URxvt.xftAntialias: true
4985URxvt.letterSpace: 0
4986
4987URxvt.depth: 0
4988URxvt.loginShell: true
4989URxvt.saveLines: 100000
4990URxvt.internalBorder: 3
4991URxvt.lineSpace: 0
4992URxvt.scrollBar: false
4993URxvt.scrollStyle: rxvt
4994URxvt*scrollTtyOutput: false
4995URxvt*scrollWithBuffer: true
4996URxvt*scrollTtyKeypress: true
4997URxvt.keysym.Shift-Up: command:\033]720;1\007
4998URxvt.keysym.Shift-Down: command:\033]721;1\007
4999
5000URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
2e877d14
AB
5001URxvt.url-select.launcher: firefox
5002URxvt.url-select.underline: true
5003URxvt.keysym.M-u: perl:url-select:select_next
5004URxvt.keysym.M-Escape: perl:keyboard-select:activate
5005URxvt.keysym.M-s: perl:keyboard-select:search
5006URxvt.url-launcher: /usr/bin/firefox
5007URxvt.matcher.button: 1
5008URxvt.iso14755: false
5009URxvt.iso14755_53: false
5010URxvt.keysym.M-c: perl:clipboard:copy
5011URxvt.keysym.M-v: perl:clipboard:paste
5012URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
5013URxvt.keysym.C-Up: font-size:increase
5014URxvt.keysym.C-Down: font-size:decrease
5015URxvt.keysym.C-S-Up: font-size:incglobal
5016URxvt.keysym.C-S-Down: font-size:decglobal
5017URxvt.keysym.C-equal: font-size:reset
5018!URxvt.keysym.C-question: font-size:show
5019
5020URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5021
5022!urxvt*foreground: white
5023!urxvt*background: black
5024
5025!*color0: #2E3436
5026!*color1: #a40000
5027!*color2: #4E9A06
5028!*color3: #C4A000
5029!*color4: #3465A4
5030!*color5: #75507B
5031!*color6: #ce5c00
5032!*color7: #babdb9
5033!*color8: #555753
5034!*color9: #EF2929
5035!*color10: #8AE234
5036!*color11: #FCE94F
5037!*color12: #729FCF
5038!*color13: #AD7FA8
5039!*color14: #fcaf3e
5040!*color15: #EEEEEC
5041
5042!URxvt.foreground: #C8C8C8
5043!URxvt.background: #FFFFFF
5044
5045!! black
5046!*color0: #2E3436
5047!*color8: #555753
5048!! red
5049!*color1: #a40000
5050!*color9: #EF2929
5051!! green
5052!*color2: #4E9A06
5053!*color10: #8AE234
5054!! yellow
5055!*color3: #C4A000
5056!*color11: #FCE94F
5057!! blue
5058!*color4: #3465A4
5059!*color12: #729FCF
5060!! purple
5061!*color5: #75507B
5062!*color13: #AD7FA8
5063!! orange (replaces cyan)
5064!*color6: #ce5c00
5065!*color14: #fcaf3e
5066!! white
5067!*color7: #babdb9
5068!*color15: #EEEEEC
5069
5070! Tango colour theme for rxvt-unicode
5071URxvt.background: #FFFFFF
5072URxvt.foreground: #000000
5073
5074! Black
5075URxvt.color0: #2E3436
5076URxvt.color8: #757773
5077
5078! Red
5079URxvt.color1: #CC0000
5080URxvt.color9: #EF2929
5081
5082! Green
5083URxvt.color2: #4E9A06
5084URxvt.color10: #8AE234
5085
5086! Yellow
5087URxvt.color3: #C4A000
5088URxvt.color11: #FCE94F
5089
5090! Blue
5091URxvt.color4: #3465A4
5092URxvt.color12: #729FCF
5093
5094! Magenta
5095URxvt.color5: #75507B
5096URxvt.color13: #AD7FA8
5097
5098!! Cyan
5099!URxvt.color6: #06989A
5100!URxvt.color14: #34E2E2
5101! orange (replaces cyan)
1f2bc66e
AB
5102,*color6: #ce5c00
5103,*color14: #fcaf3e
2e877d14
AB
5104
5105! White
5106URxvt.color7: #D3D7CF
5107URxvt.color15: #EEEEEC
5108#+end_src
5109
d716e61e
AB
5110*** xkb us_ab keyboard layout
5111
5112#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5113default partial alphanumeric_keys
5114xkb_symbols "us_ab" {
5115 include "us(basic)"
5116 name[Group1]= "English (US)(aminb)";
5117
5118 key <MENU> { [ Alt_R ] };
5119};
5120#+end_src
5121
69a6fe26
AB
5122** XDG
5123:PROPERTIES:
5124:header-args+: :tangle ~/.config/user-dirs.dirs
5125:END:
5126
5127#+begin_src conf
5128XDG_DESKTOP_DIR="$HOME/Desktop"
5129XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5130XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5131XDG_MUSIC_DIR="$HOME/usr/music"
5132XDG_PICTURES_DIR="$HOME/usr/pics"
5133XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5134XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5135XDG_VIDEOS_DIR="$HOME/usr/vids"
5136#+end_src
5137
5138** Zathura
5139:PROPERTIES:
5140:header-args+: :tangle ~/.config/zathura/zathurarc
5141:END:
5142
5143#+begin_src conf
5144set smooth-scroll true
5145set selection-clipboard clipboard
5146set zoom-step 05
5147set default-bg "#272727"
5148set statusbar-bg "#272727"
5149set inputbar-bg "#373737"
5150#+end_src
5151
b1f6f894
AB
5152** Zsh
5153
5154My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5155[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5156installed.
5157
5158*** zimrc
5159:PROPERTIES:
5160:header-args+: :tangle ~/.zimrc
5161:END:
5162
5163#+begin_src sh
5164
5165
5166#################
5167# CORE SETTINGS #
5168#################
5169
5170#
5171# Zim settings
5172#
5173
5174# Select what modules you would like enabled.
5175# The second line of modules may depend on options set by modules in the first
5176# line. These dependencies are noted on the respective module's README.md.
5177zmodules=(directory environment git git-info history input ssh utility custom \
5178 syntax-highlighting history-substring-search prompt completion)
5179
5180
5181###################
5182# MODULE SETTINGS #
5183###################
5184
5185#
5186# Prompt
5187#
5188
5189# Set your desired prompt here
5190zprompt_theme='pure'
5191#PURE_PROMPT_SYMBOL=λ
5192#PURE_PROMPT_SYMBOL=δ
5193PURE_PROMPT_SYMBOL=➜
5194
5195#
5196# Completion
5197#
5198
5199# set an optional host-specific filename for the completion cache file
5200# if none is provided, the default '.zcompdump' is used.
5201#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5202
5203#
5204# Utility
5205#
5206
5207# Uncomment to enable command correction prompts
5208# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5209setopt CORRECT
5210
5211#
5212# Environment
5213#
5214
5215# Set the string below to the desired terminal title format string.
5216# The terminal title is redrawn upon directory change, however, variables like
5217# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5218# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5219# The example below uses the following format: 'username@host:/current/directory'
5220ztermtitle='%n@%m:%~'
5221
5222#
5223# Input
5224#
5225
5226# Uncomment to enable double-dot expansion.
5227# This appends '../' to your input for each '.' you type after an initial '..'
5228#zdouble_dot_expand='true'
5229
5230#
5231# Syntax-Highlighting
5232#
5233
5234# This determines what highlighters will be used with the syntax-highlighting module.
5235# Documentation of the highlighters can be found here:
5236# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5237# For (u)rxvt, termite and gnome-terminal users,
5238# removing the 'cursor' highlighter will fix the disappearing cursor problem
5239#zhighlighters=(main brackets cursor)
5240zhighlighters=(main brackets pattern)
5241
5242
5243#
5244# SSH
5245#
5246
5247# Load these ssh identities with the ssh module
05675ca4 5248zssh_ids=(id_ed25519_bandali)
b1f6f894
AB
5249
5250
5251#
5252# Pacman
5253#
5254
5255# Set (optional) pacman front-end.
5256zpacman_frontend='yay'
5257
5258# Load any helper scripts as defined here
5259#zpacman_helper=(aur)
5260#+end_src
5261
5262*** zlogin
5263:PROPERTIES:
5264:header-args+: :tangle ~/.zlogin
5265:END:
5266
5267#+begin_src sh
5268
5269
5270#
5271# User configuration sourced by login shells
5272#
5273
5274# Initialize zim
5275[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5276#+end_src
5277
5278*** zprofile
5279:PROPERTIES:
5280:header-args+: :tangle ~/.zprofile
5281:END:
5282
5283#+begin_src sh
5284#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5285#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
50fff474 5286export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
b1f6f894
AB
5287export XDG_CONFIG_HOME=$HOME/.config
5288export XDG_DATA_HOME=$HOME/.local/share
5289export XDG_DATA_DIRS=/usr/local/share:/usr/share
5290export MAILDIR="$HOME/mail"
5291export CVS_RSH=ssh
5292#export MATHMODELS=$HOME/src/eiffel/mathmodels
5293#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5294#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5295
5296# Eiffel2Java stuff
5297#export JAVA_HOME=/usr/lib/jvm/default
5298#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5299#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5300#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5301
5302#export PATH="$HOME/usr/build/pvs:$PATH"
5303#export SBCLISP_HOME=/usr/share/sbcl-source
5304#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5305
5306export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
5307
5308#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5309#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5310
81f3a324
AB
5311export NIXPKGS=$HOME/src/git/nixpkgs
5312
88bb4858 5313if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
b1f6f894
AB
5314#+end_src
5315
5316*** zshenv
5317:PROPERTIES:
5318:header-args+: :tangle ~/.zshenv
5319:END:
5320
5321#+begin_src sh
5322# Ensure that a non-login, non-interactive shell has a defined environment.
5323if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5324 source "${ZDOTDIR:-$HOME}/.zprofile"
5325fi
5326#+end_src
5327
5328*** zshrc
5329:PROPERTIES:
5330:header-args+: :tangle ~/.zshrc
5331:END:
5332
5333#+begin_src sh
5334# Bash-like navigation
5335#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5336#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5337export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5338#ZLE_SPACE_SUFFIX_CHARS=$'|&'
5339
5340#disable -r time # disable shell reserved word
5341#alias time='time -p' # -p for POSIX output
5342
5343# rehash if last command was pacaur or pacman
5344# (so that zsh picks up changes in $PATH immediately)
5345TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5346
5347#
5348# User configuration sourced by interactive shells
5349#
5350
5351# Change default zim location
5352export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5353
5354# Start zim
5355[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5356
5357ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5358#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5359
5360setopt globdots
5361
5362source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
2a6e947b 5363# source ~/.zsh/zsh-autopair/autopair.zsh
b1f6f894
AB
5364
5365
5366### fzf ###
5367
5368source /usr/share/fzf/key-bindings.zsh
5369source /usr/share/fzf/completion.zsh
5370
5371# Accept history selection instead of putting it on
5372# the command line
5373fzf-history-widget-accept() {
5374 fzf-history-widget
5375 zle accept-line
5376}
5377#zle -N fzf-history-widget-accept
5378#bindkey '^R' fzf-history-widget-accept
5379
5380# alt+c preview
5381export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5382
5383### fzf ###
5384
5385
5386# aliases
5387alias mpv="mpv --ytdl-format mp4"
5388alias mv="mv -iv"
5389alias cp="cp -iv"
5390alias scl=systemctl
5391alias jcl=journalctl
5bf9d3c9 5392alias m="mbsync -a; getmail; notmuch new"
b1f6f894 5393alias best="youtube-dl -f best"
2a1be6b4 5394alias nixx="ssh amin@nix.aminb.org"
373a060a 5395alias fence="ssh aminb@fencepost.gnu.org"
b1f6f894
AB
5396
5397aur() {
5398 cd ~/usr/build
5399 git clone https://aur.archlinux.org/${1}.git
5400 cd ${1}
5401}
5402
5403# i-beam cursor
5404echo -e "\033[5 q"
5405#echo -e "\033[6 q"
5406#+end_src
5407
b13e2dc1
AB
5408* Scripts
5409
5410This section contains various useful scripts and the ones used by the
5411programs above. For instance, =toggle-tablet= for switching to and
5412from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5413Xfce's presentation mode which keeps the screen awake, and
5414=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5415exact brightness value.
5416
683f2865
AB
5417** battery-percentage-time
5418:PROPERTIES:
7564bd4d 5419:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
683f2865
AB
5420:END:
5421
6a056822 5422#+begin_src sh :tangle no
7564bd4d
AB
5423dbus_send() {
5424 label=$1
5425 dbus-send --print-reply=literal --system \
5426 --dest=org.freedesktop.UPower \
5427 /org/freedesktop/UPower/devices/battery_BAT0 \
5428 org.freedesktop.DBus.Properties.Get \
5429 string:org.freedesktop.UPower.Device \
5430 string:"${label}" | awk '{print $3}'
5431}
5432
5433perc=$(dbus_send 'Percentage')
5434state=$(dbus_send 'State')
be33ab1f
AB
5435
5436if [ "$state" -eq 2 ]; then # Discharging
7564bd4d 5437 secs=$(dbus_send 'TimeToEmpty')
be33ab1f 5438elif [ "$state" -eq 1 ]; then # Charging
7564bd4d 5439 secs=$(dbus_send 'TimeToFull')
be33ab1f 5440fi
7564bd4d 5441
ce79d14b 5442printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
683f2865
AB
5443#+end_src
5444
9455bb8f
AB
5445** my-i3status.py
5446:PROPERTIES:
5447:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
5448:END:
5449
5450#+begin_src python :comments none
5451# -*- coding: utf-8 -*-
5452
5453# This script is a simple wrapper which prefixes each i3status line with custom
5454# information. It is based on:
5455# https://github.com/i3/i3status/blob/master/contrib/wrapper.py
5456#
5457# In ~/.i3status.conf, add the following line:
5458# output_format = "i3bar"
5459# in the 'general' section.
5460# Then, in ~/.config/i3/config or ~/.config/sway/config add:
5461# status_command i3status | my-i3status.py
5462# in the 'bar' section. Make sure my-i3status.py is in $PATH.
5463#
5464# © 2012 Valentin Haenel <valentin.haenel@gmx.de>
5465# © 2018 Amin Bandali <bandali@gnu.org>
5466#
5467# This program is free software. It comes without any warranty, to the extent
5468# permitted by applicable law. You can redistribute it and/or modify it under
5469# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
5470# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
5471# details.
5472
5473import sys
5474import json
5475import os
5476
5477def get_nosleep():
5478 """ Return true if ~/.nosleep exists. """
5479 return os.path.isfile(os.path.expanduser("~/.nosleep"))
5480
5481def print_line(message):
5482 """ Non-buffered printing to stdout. """
5483 sys.stdout.write(message + '\n')
5484 sys.stdout.flush()
5485
5486def read_line():
5487 """ Interrupted respecting reader for stdin. """
5488 # try reading a line, removing any extra whitespace
5489 try:
5490 line = sys.stdin.readline().strip()
5491 # i3status sends EOF, or an empty line
5492 if not line:
5493 sys.exit(3)
5494 return line
5495 # exit on ctrl-c
5496 except KeyboardInterrupt:
5497 sys.exit()
5498
5499if __name__ == '__main__':
5500 # Skip the first line which contains the version header.
5501 print_line(read_line())
5502
5503 # The second line contains the start of the infinite array.
5504 print_line(read_line())
5505
5506 while True:
5507 line, prefix = read_line(), ''
5508 # ignore comma at start of lines
5509 if line.startswith(','):
5510 line, prefix = line[1:], ','
5511
5512 if get_nosleep():
5513 j = json.loads(line)
5514 # insert information into the start of the json, but could be anywhere
5515 j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
5516 # and echo back new encoded json
5517 print_line(prefix+json.dumps(j))
5518 else:
5519 print_line(prefix+line)
5520#+end_src
5521
b13e2dc1
AB
5522** rofi-light
5523:PROPERTIES:
5524:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5525:END:
5526
33c5a5cd 5527#+begin_src bash
b13e2dc1 5528cur=$(light -G)
c2ce9b12 5529val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
b13e2dc1
AB
5530light -S $val
5531#+end_src
5532
ec002050
AB
5533** s (run sway)
5534:PROPERTIES:
5535:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5536:END:
5537
5538#+begin_src bash
ec002050
AB
5539export _JAVA_AWT_WM_NONREPARENTING=1
5540export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
c19f32f3 5541light -Nr 2
ec002050
AB
5542source $HOME/.zprofile
5543sway
5544#+end_src
5545
bfe0aa23
AB
5546** sway-ws-util
5547:PROPERTIES:
5548:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5549:END:
5550
5551#+begin_src bash
5552curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
e549b7c8
AB
5553[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5554[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
bfe0aa23
AB
5555dest_ws=-1
5556op=-1
5557
5558if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5559 op="$1"
5560 if [ "$2" = "prev" ]; then
5561 dest_ws="$prev_ws"
5562 elif [ "$2" = "next" ]; then
5563 dest_ws="$next_ws"
5564 else
c60842dd 5565 echo "Usage: $0 $1 {prev|next} [follow]"
bfe0aa23
AB
5566 exit 1
5567 fi
5568else
5569 echo "Usage: $0 {switch|move} {prev|next} [follow]"
5570 exit 1
5571fi
5572
5573if [ "$op" = "switch" ]; then
5574 sway workspace "$dest_ws"
5575elif [ "$op" = "move" ]; then
5576 sway move container to workspace "$dest_ws"
5577 if [ "$3" = "follow" ]; then
5578 sway workspace "$dest_ws"
5579 fi
5580fi
5581#+end_src
5582
b13e2dc1
AB
5583** toggle-layout
5584:PROPERTIES:
5585:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5586:END:
5587
e388ae6f 5588#+begin_src bash :tangle no
b13e2dc1
AB
5589lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5590
5591if [ "$lang" = "us" ]; then
5592 setxkbmap ir
5593else
5594 setxkbmap us
5595 # xmodmap $HOME/.Xmodmap
5596fi
5597#+end_src
5598
5599** toggle-presentation-mode
5600:PROPERTIES:
5601:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5602:END:
5603
e388ae6f 5604#+begin_src bash :tangle no
b13e2dc1
AB
5605xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5606#+end_src
33c5a5cd 5607
72f329ba
AB
5608** toggle-tablet
5609:PROPERTIES:
5610:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5611:END:
5612
5613This script toggles between a 'normal' mode and a 'tablet' mode, doing
5614a few things:
5615
5616- rotates the screen using =xrandr=, so that rotating the physical
5617 display of my X220t would have the laptop's battery on the right
5618 hand side,
5619- enables touch screen,
5620- properly rotates the stylus pen and touch screen pointers, and
5621- toggles between RGB and Vertical BGR sub-pixel order.
5622
e388ae6f 5623#+begin_src bash :tangle no
72f329ba
AB
5624case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5625 0) # Screen is not rotated, we should rotate it right (90°)
5626 xrandr -o 3
5627 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5628 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5629 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5630 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5631 ;;
5632 1) # Currently top is rotated right, we should set it normal (0°)
5633 xrandr -o 0
5634 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5635 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5636 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5637 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5638 ;;
5639 *)
5640 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5641 exit 1
5642 ;;
5643esac
5644#+end_src
5645
2e877d14
AB
5646** unlock-def-gk.py
5647:PROPERTIES:
5648:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5649:END:
5650
e388ae6f 5651#+begin_src python :tangle no
2e877d14
AB
5652import gnomekeyring as gk
5653# list_item_ids_sync('login')[0] == 1L
5654gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5655#+end_src
5656
4fc8d5d2
AB
5657** volume-info
5658:PROPERTIES:
5659:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5660:END:
5661
6a056822 5662#+begin_src sh :tangle no
4fc8d5d2
AB
5663cur_vol=$(pamixer --get-volume)
5664
5665if [ $(pamixer --get-mute) = true ]; then
5666 printf 'mt \n' "$cur_vol"
5667else
5668 printf '%02d \n' "$cur_vol"
5669fi
5670#+end_src
5671
4f183f2a
AB
5672** wp
5673
5674My little wallpaper changer script.
5675
5676*** wp
5677:PROPERTIES:
5678:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5679:END:
5680
5681#+begin_src bash :tangle no
5682export DISPLAY=:0
5683
5684case "$1" in
5685 "day")
5686 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5687 ;;
5688 "night")
5689 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5690 ;;
5691 *)
5692 echo $"Usage: $0 {day|night}"
5693 exit 1
5694esac
5695#+end_src
5696
5697*** wp-auto
5698:PROPERTIES:
5699:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5700:END:
5701
5702#+begin_src bash :tangle no
5703SED=$(which sed)
5704ROFI=$(which rofi)
5705
5706export DISPLAY=:0
5707HOUR=$(date +%H)
5708
5709if [ -z "${SED}" ]
5710then
5711 echo "Did not find 'sed', script cannot continue."
5712 exit 1
5713fi
5714if [ -z "${ROFI}" ]
5715then
5716 echo "Did not find rofi, there is no point to continue."
5717 exit 1
5718fi
5719
5720###
5721# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5722# Repeated calls should leave the config clean-ish
5723###
5724function set_theme()
5725{
5726 CDIR="${HOME}/.config/rofi/"
5727 if [ ! -d "${CDIR}" ]
5728 then
5729 mkdir -p ${CDIR}
5730 fi
5731 if [ -f "${CDIR}/config" ]
5732 then
5733 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5734 fi
5735 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5736
5737}
5738
5739if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5740 then
5741 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5742 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5743 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5744 else
5745 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5746 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5747 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5748fi
5749#+end_src
5750
5751*** wp.service
5752:PROPERTIES:
5753:header-args+: :tangle ~/.config/systemd/user/wp.service
5754:END:
5755
5756#+begin_src conf :tangle no
5757[Unit]
5758Description=wallpaper service
5759
5760[Service]
5761Type=oneshot
5762ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5763#+end_src
5764
5765*** wp.timer
5766:PROPERTIES:
5767:header-args+: :tangle ~/.config/systemd/user/wp.timer
5768:END:
5769
5770#+begin_src conf :tangle no
5771[Unit]
5772[Unit]
5773Description=wallpaper timer
5774
5775[Timer]
5776OnCalendar=07,21:00
5777Unit=wp.service
5778Persistent=true
5779
5780[Install]
5781WantedBy=timers.target
5782#+end_src
5783
69a6fe26
AB
5784** zathura-sync.sh
5785:PROPERTIES:
5786:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5787:END:
5788
5789#+begin_src sh
5790pos="$1"
5791pdffile="$2"
5792zathura --synctex-forward "$pos" "$pdffile" || \
5793 (
5794 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5795 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5796#+end_src
33c5a5cd
AB
5797** Fun :)
5798
5799*** eat-em
5800:PROPERTIES:
5801:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5802:END:
5803
5804#+begin_src sh
5805# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5806# [ESC] character in original post removed here.
5807
5808# ANSI Color -- use these variables to easily have different color
5809# and format output. Make sure to output the reset sequence after
5810# colors (f = foreground, b = background), and use the 'off'
5811# feature for anything you turn on.
5812
5813initializeANSI()
5814{
5815 esc="$(echo -en '\e')"
5816
5817 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5818 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5819 cyanf="${esc}[36m"; whitef="${esc}[37m"
5820
5821 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5822 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5823 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5824
5825 boldon="${esc}[1m"; boldoff="${esc}[22m"
5826 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5827 ulon="${esc}[4m"; uloff="${esc}[24m"
5828 invon="${esc}[7m"; invoff="${esc}[27m"
5829
5830 reset="${esc}[0m"
5831}
5832
5833# note in this first use that switching colors doesn't require a reset
5834# first - the new color overrides the old one.
5835
5836#clear
5837
5838initializeANSI
5839
5840cat << EOF
5841
5842 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5843 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5844 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5845 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5846 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5847 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5848
5849 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5850 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5851 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5852 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5853 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5854 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5855
5856EOF
5857#+end_src
5858
33c5a5cd
AB
5859*** invade-em
5860:PROPERTIES:
5861:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5862:END:
5863
5864#+begin_src bash
5865#
5866# ANSI color scheme script featuring Space Invaders
5867#
5868# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5869# Modified by lolilolicon
5870#
5871
5872f=3 b=4
5873for j in f b; do
5874 for i in {0..7}; do
5875 printf -v $j$i %b "\e[${!j}${i}m"
5876 done
5877done
5878bld=$'\e[1m'
5879rst=$'\e[0m'
5880
5881cat << EOF
5882
5883 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5884 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5885 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5886 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5887
5888 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5889 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5890 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5891 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5892
5893
5894 $f7▌$rst
5895
5896 $f7▌$rst
5897
5898 $f7 ▄█▄ $rst
5899 $f7▄█████████▄$rst
5900 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5901
5902EOF
5903#+end_src