[rc/fontconfig] use Liberation Sans over Nimbus Sans for Helvetica
[~bandali/configs] / rc.org
CommitLineData
08146d0e
AB
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
b13e2dc1
AB
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
b13e2dc1
AB
17** bspwm
18
19*** bspwmrc
20:PROPERTIES:
21:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22:END:
23
fb52d1f9 24#+begin_src sh :tangle no
b13e2dc1
AB
25sxhkd &
26sh ~/.fehbg &
27xfce4-panel -d &
87af8efd 28compton &
b13e2dc1
AB
29sleep 0.5 && pasystray --notify=all &
30
31bspc monitor -d I II III IV V VI VII VIII IX X
32#bspc monitor eDP-1 -d I II III IV V
33#bspc monitor HDMI-1 -d VI VII VIII IX X
34
35#bspc config border_width 2
36#bspc config window_gap 8
37bspc config window_gap 0
38
39bspc config bottom_padding 26
40
41bspc config split_ratio 0.52
42bspc config borderless_monocle true
43bspc config gapless_monocle true
44bspc config click_to_focus button1
45bspc config directional_focus_tightness low
46
87af8efd 47#bspc rule -a Firefox desktop='^1' follow=on
b13e2dc1
AB
48bspc rule -a Nightly desktop='^1' follow=on
49bspc rule -a Emacs desktop='^2' state=tiled follow=on
50#bspc rule -a Chromium desktop='^4' follow=on
51bspc rule -a URxvt state=floating
52bspc rule -a URxvt:tiled state=tiled
53bspc rule -a Connman-gtk state=floating
54bspc rule -a Xfce4-panel state=floating
55bspc rule -a TelegramDesktop state=floating
56bspc rule -a Ec state=floating
57bspc rule -a Pavucontrol state=floating
58bspc rule -a Eog state=floating
59bspc rule -a Seahorse state=floating
60bspc rule -a mpv state=floating
61bspc rule -a Evince state=floating
62bspc rule -a Meld state=floating
63bspc rule -a Autokey-gtk state=floating
64bspc rule -a Mousepad state=floating
65bspc rule -a Wrapper-1.0 state=floating
66bspc rule -a File-roller state=floating
67bspc rule -a Gnome-disks state=floating
68bspc rule -a Termite state=floating
69bspc rule -a Termite:tiled state=tiled
70bspc rule -a Thunderbird:Calendar state=floating
71bspc rule -a Audacity state=floating
72bspc rule -a Proof state=floating # pvs x-show-proof
73bspc rule -a Nm-connection-editor state=floating
74bspc rule -a Wire state=floating
75bspc rule -a discord state=floating
76bspc rule -a X2goclient state=floating
77bspc rule -a SimpleScreenRecorder state=floating
78bspc rule -a Gimp state=floating
79bspc rule -a Wrapper-2.0 state=floating
80bspc rule -a Zathura state=tiled
81#+end_src
82
83*** sxhkdrc
84:PROPERTIES:
85:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86:END:
87
fb52d1f9 88#+begin_src conf :tangle no
b13e2dc1
AB
89#
90# wm independent hotkeys
91#
92
93# terminal emulator
94super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97#super + {_,shift} + Return
98# termite{_, --name=tiled}
99
100# program launcher
101super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104super + alt + space
105 xfce4-popup-whiskermenu
106
107# window finder
108super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111# password manager
112alt + space
113 rofi-pass
114
115# firefox
116#super + r
117# firefox
118
119# chromium
120#super + c
121# chromium -incognito
122
123# emacs
124super + e
125 emacs
126
127# make sxhkd reload its configuration files:
128super + Escape
129 pkill -USR1 -x sxhkd
130
131# volume {up,down}
132XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135# mute
136XF86AudioMute
137 pamixer --toggle-mute
138
373a060a
AB
139XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
b13e2dc1
AB
142# playback control
143XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146# lock the screen
147super + shift + q
148 light-locker-command -l
149
150# Toggle keyboard layout
151super + F7
152 toggle-layout
153
154# Toggle Xfce presentation mode
155XF86LaunchB
156 toggle-presentation-mode
157
158# monitor brightness
159XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162super + apostrophe
163 rofi-light
164
165# keyboard brightness
166#XF86KbdBrightness{Up,Down}
167# kbdlight {up,down}
168
72f329ba
AB
169XF86RotateWindows
170 toggle-tablet
171
b13e2dc1
AB
172#
173# bspwm hotkeys
174#
175
176# quit bspwm normally
177super + alt + Escape
178 bspc quit
179
180# close and kill
181super + {w,q}
182 bspc node -{c,k}
183
184# alternate between the tiled and monocle layout
185super + m
186 bspc desktop -l next
187
188# send the newest marked node to the newest preselected node
189super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192# swap the current node and the biggest node
193super + g
194 bspc node -s biggest
195
196#
197# state/flags
198#
199
200# set the window state
201super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204# set the node flags
205super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208#
209# focus/swap
210#
211
212# focus the node in the given direction
213super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216# focus the node for the given path jump
217super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220# focus the next/previous node in the current desktop
221super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224# focus the next/previous desktop in the current monitor
225super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228# send to next/prev desktop
229super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232# focus the last node/desktop
233super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236# focus the older or newer node in the focus history
237super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242# focus or send to the given desktop
243super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246#
247# preselect
248#
249
250# preselect the direction
251super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254# preselect the ratio
255super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258# cancel the preselection for the focused node
259super + ctrl + space
260 bspc node -p cancel
261
262# cancel the preselection for the focused desktop
263super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266#
267# move/resize
268#
269
270# expand a window by moving one of its side outward
271super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274# contract a window by moving one of its side inward
275super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278# move a floating window
279super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282#alt + bracket{left,right}
283# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284#+end_src
285
286** compton
287:PROPERTIES:
288:header-args+: :tangle ~/.config/compton.conf
289:END:
290
fb52d1f9 291#+begin_src conf :tangle no
b13e2dc1
AB
292# Shadow
293shadow = false; # Enabled client-side shadows on windows.
294no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295no-dnd-shadow = true; # Don't draw shadows on DND windows.
296clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298shadow-radius = 5; # The blur radius for shadows. (default 12)
299shadow-offset-x = -5; # The left offset for shadows. (default -15)
300shadow-offset-y = -5; # The top offset for shadows. (default -15)
301# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306# shadow-exclude = "n:e:Notification";
307#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311# Opacity
312menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323# blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326# blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332# Fading
333fading = false; # Fade windows during opacity changes.
334fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338fade-exclude = [ ]; # Exclude conditions for fading.
339
340# Other
341backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355dbe = false; # Enable DBE painting mode. Rarely needed.
356paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368# GLX backend # GLX backend fine-tune options. See man page for more info.
369glx-no-stencil = true; # Recommended.
370glx-copy-from-front = false; # Useful with --glx-swap-method,
371# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372# glx-no-rebind-pixmap = true; # Recommended if it works.
373glx-no-rebind-pixmap = true; # Recommended if it works.
374#glx-swap-method = "4"; # See man page.
375glx-swap-method = "4"; # See man page.
376
377# Window type settings
378wintypes:
379{
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389};
390#+end_src
391
05ab13aa
AB
392** Dunst
393:PROPERTIES:
394:header-args+: :tangle ~/.config/dunst/dunstrc
395:END:
396
397#+begin_src conf
398[global]
399#font = Ubuntu Mono 10.5
400font = Inconsolata 11
401
402# Path to default icons.
403icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405icon_position = left
406# <b>bold</b>
407# <i>italic</i>
408# <s>strikethrough<s/>
409# <u>underline</u>
410markup = full
411# The format of the message. Possible variables are:
412# %a appname
413# %s summary
414# %b body
415# %i iconname (including its path)
416# %I iconname (without its path)
417# %p progress value if set ([ 0%] to [100%]) or nothing
418# Markup is allowed
419format = "<b>%s</b>\n%b"
420# Sort messages by urgency
421sort = yes
422# Show how many messages are currently hidden (because of geometry)
423indicate_hiddenl= no
424# Alignment of message text.
425# Possible values are "left", "center" and "right"
426alignment = center
427# The frequency with wich text that is longer than the notification
428# window allows bounces back and forth.
429# This option conflicts with 'word_wrap'.
430# Set to 0 to disable
431bounce_freq = 3
432# show age of message if message is older than show_age_threshold seconds.
433# set to -1 to disable
434show_age_threshold = -1
435# split notifications into multiple lines if they don't fit into geometry
436word_wrap = yes
437# ignore newlines '\n' in notifications
438ignore_newline = no
439# The geometry of the message window.
440# geometry [{width}]x{height}][+/-{x}+/-{y}]
441# The height is measured in number of notifications everything else in pixels. If the width
442# is omitted but the height is given ("-geometry x2"), the message window
443# expands over the whole screen (dmenu-like). If width is 0,
444# the window expands to the longest message displayed.
445# A positive x is measured from the left, a negative from the
446# right side of the screen. Y is measured from the top and down respectevly.
447# The width can be negative. In this case the actual width is the
448# screen width minus the width defined in within the geometry option.
449#geometry = "410x12-12+12"
450#geometry = "0x0-30-30"
451geometry = "260x12-30-30"
452# The transparency of the window. range: [0; 100]
453# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454transparency = 0
455# Don't remove messages, if the user is idle (no mouse or keyboard input)
456# for longer than idle_threshold seconds.
457# Set to 0 to disable.
458idle_threshold = 120
459# Which monitor should the notifications be displayed on.
460monitor = 0
461# Display notification on focused monitor. Possible modes are:
462# mouse: follow mouse pointer
463# keyboard: follow window with keyboard focus
464# none: don't follow anything
465#
466# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467# This should be the case for almost all modern windowmanagers.
468#
469# If this option is set to mouse or keyboard, the monitor option will be
470# ignored.
471follow = keyboard
472# should a notification popped up from history be sticky or
473# timeout as if it would normally do.
474sticky_history = yes
475# The height of a single line. If the height is smaller than the font height,
476# it will get raised to the font height.
477# This adds empty space above and under the text.
478line_height = 0
479
480show_indicators = yes
481
482# Draw a line of 'separatpr_height' pixel height between two notifications.
483# Set to 0 to disable
484separator_height = 3
485# padding between text and separator
486padding = 8
487# horizontal padding
488horizontal_padding = 8
489# Define a color for the separator.
490# possible values are:
491# * auto: dunst tries to find a color fitting to the background
492# * foreground: use the same color as the foreground
493# * frame: use the same color as the frame.
494# * anything else will be interpreted as a X color
495separator_color = foreground
496# print a notification on startup
497# This is mainly for error detection, since dbus (re-)starts dunst
498# automatically after a crash.
499startup_notification = false
500# dmenu path
501#dmenu = /usr/bin/dmenu -p dunst:
502dmenu = /usr/bin/rofi -dmenu -p dunst:
503# browser for opening urls in context menu
504browser = /usr/bin/firefox -new-tab
505[frame]
506width = 0
507color = "#377222"
508[shortcuts]
509# shortcuts are specified as [modifier+][modifier+]...key
510# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511# and 'mod4' (windows-key)
512# xev might be helpful to find names for keys
513# close notification
514close = ctrl+space
515# close all notifications
516close_all = ctrl+shift+space
517# redisplay last message(s)
518# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519history = ctrl+shift+h
520# context menu
521context = ctrl+shift+period
522[urgency_low]
523# IMPORTANT: colors have to be defined in quotation marks.
524# Otherwise the '#' and following would be interpreted as a comment.
525background = "#1d2a30"
526foreground = "#71c2af"
527timeout = 3
528[urgency_normal]
529background = "#1d2a30"
530foreground = "#71c2af"
531timeout = 0
532[urgency_critical]
533background = "#1d2a30"
534foreground = "#ff9982"
535timeout = 0
536
537# Every section that isn't one of the above is interpreted as a rules
538# to override settings for certain messages.
539# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540# and you can override the 'timeout', 'urgency', 'foreground', 'background'
541# and 'format'.
542# Shell-like globbing will get expanded.
543#
544# SCRIPTING
545# you can specify a script that gets run when the rule matches by setting
546# the 'script' option.
547# The script will be called as follows:
548# script appname summary body icon urgency
549# where urgency can be "LOW", "NORMAL" or "CRITICAL".
550#
551# NOTE: if you don't want a notification to be displayed, set the format to ""
552# NOTE: It might be helpful to run dunst -print in a terminal in order to find
553# fitting options for rules.
554#[espeak]
555# summary = "*"
556# script = dunst_espeak.sh
557#[script-test]
558# summary = "*script*"
559# script = dunst_test.sh
560#[ignore]
561## This notification will not be displayed
562# summary = "foobar"
563# format = ""
564#[signed_on]
565# appname = Pidgin
566# summary = "*signed on*"
567# urgency = low
568#
569#[signed_off]
570# appname = Pidgin
571# summary = *signed off*
572# urgency = low
573#
574#[says]
575# appname = Pidgin
576# summary = *says*
577# urgency = critical
578#
579#[twitter]
580# appname = Pidgin
581# summary = *twitter.com*
582# urgency = normal
583#
584[xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587#+end_src
588
589** Fontconfig
590:PROPERTIES:
45d84997 591:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
05ab13aa
AB
592:END:
593
594#+begin_src xml
595<?xml version="1.0"?>
596<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597<fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
75f8530e 628 <prefer>
05ab13aa 629 <family>Liberation Sans</family>
75f8530e 630 </prefer>
05ab13aa
AB
631</alias>
632</fontconfig>
633#+end_src
634
a106372e
AB
635** getmail
636
637*** getmailrc
638:PROPERTIES:
639:header-args+: :tangle ~/.getmail/getmailrc
640:END:
641
642#+begin_src conf
643[retriever]
644type = SimplePOP3SSLRetriever
645server = fencepost.gnu.org
646username = aminb
647password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
648port = 995
649use_apop = True
650
651[destination]
652type = Maildir
653path = ~/mail/gnu/Inbox/
654
655[options]
656delete = True
657#+end_src
658
659*** getmail.service
660:PROPERTIES:
661:header-args+: :tangle ~/.config/systemd/user/getmail.service
662:END:
663
664#+begin_src conf :tangle no
665[Unit]
666Description=getmail service
667
668[Service]
669Type=oneshot
670ExecStart=/usr/bin/getmail
671StandardOutput=syslog
672StandardError=syslog
673#+end_src
674
675*** getmail.timer
676:PROPERTIES:
677:header-args+: :tangle ~/.config/systemd/user/getmail.timer
678:END:
679
680#+begin_src conf :tangle no
681[Unit]
682Description=getmail timer
683
684[Timer]
685OnCalendar=*:0/30
686Persistent=true
687Unit=getmail.service
688
689[Install]
690WantedBy=timers.target
691#+end_src
692
58cbbce2 693** Git
08146d0e
AB
694
695*** gitconfig
696:PROPERTIES:
697:header-args+: :tangle ~/.gitconfig
698:END:
699
700**** user
701#+begin_src conf
702[user]
703 name = Amin Bandali
835adbdb
AB
704 email = amin@gnu.org
705 signingkey = CDDE75F903538E71813CDA27D1FBA36627D65876
08146d0e
AB
706#+end_src
707
708**** signing
709#+begin_src conf
5c7c14c7
AB
710[commit]
711 gpgsign = true
08146d0e
AB
712# [format]
713# signoff = true
714#+end_src
715
716**** core
717#+begin_src conf
718[core]
719 autocrlf = input # CRLF -> LF on commit
720 editor = emacsclient -t
721 excludesfile = ~/.gitignore_global
722 pager = "less"
723#+end_src
724
725**** gpg
726#+begin_src conf
727[gpg]
728 program = gpg2
729#+end_src
730
731**** alias
732#+begin_src conf
733[alias]
734 git = !exec git # handle nested git calls, e.g. git git status
735 aliases = config --get-regexp '^alias\\.'
736 a = add
737 s = status
738 sl = status --long
739 c = checkout
740 cb = checkout -b
741 b = branch
742 r = rebase
743 p = pull
744 pr = pull --rebase
745 ps = push
746 psf = push --force
74ef10b0
AB
747 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
748 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
08146d0e
AB
749#+end_src
750
751**** color
752#+begin_src conf
753[color]
754 ui = auto
755[color "status"]
756 added = green bold
757 changed = red bold
758 untracked = red bold
759[color "branch"]
760 current = green bold
761 remote = magenta bold
762[color "diff"]
763 new = green bold
764 old = red bold
765#+end_src
766
767**** status
768#+begin_src conf
769[status]
770 # showUntrackedFiles = all
771 short=true
772 branch=true
773#+end_src
774
775**** github
776#+begin_src conf
777[github]
778 user = aminb
779#+end_src
780
5c7c14c7
AB
781**** send-email
782#+begin_src conf
783[sendemail]
9e568495
AB
784 smtpuser = aminb
785 smtpserver = fencepost.gnu.org
5c7c14c7
AB
786 smtpserverport = 587
787 smtpencryption = tls
788 annotate = yes
789#+end_src
790
08146d0e
AB
791*** gitignore
792:PROPERTIES:
793:header-args+: :tangle ~/.gitignore_global
794:END:
795
796#+begin_src conf
797*.orig
798*.py[co]
799*.sublime-workspace
800*~
801.DS_Store
802*.elc
803*-autoloads.el
804#+end_src
58cbbce2 805
a106372e
AB
806** GnuPG
807:PROPERTIES:
808:header-args+: :tangle ~/.gnupg/gpg-agent.conf
809:END:
810
811#+begin_src conf
812default-cache-ttl 43200
813max-cache-ttl 43200
814
815default-cache-ttl-ssh 10800
816max-cache-ttl-ssh 10800
817
818# pinentry-program /usr/bin/pinentry-qt
819#+end_src
820
821** GTK
822
823*** gtk-2.0
824:PROPERTIES:
825:header-args+: :tangle ~/.gtkrc-2.0
826:END:
827
828#+begin_src conf
829gtk-theme-name="Greybird"
830gtk-icon-theme-name="Paper"
831gtk-font-name="Ubuntu 10"
832gtk-menu-images=0
833# gtk-key-theme-name = "Emacs"
834#+end_src
835
836*** gtk-3.0
837:PROPERTIES:
838:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
839:END:
840
841#+begin_src conf :tangle no
842[Settings]
843gtk-icon-theme-name = Paper
844# gtk-theme-name = Adwaita
845
846gtk-theme-name = Greybird
847# gtk-theme-name = Arc-Darker
848# gtk-theme-name = Numix-ArchBlue
849
850gtk-font-name = Ubuntu 10
851# gtk-key-theme-name = Emacs
852#+end_src
853
a5547504
AB
854** [[https://github.com/Leinnan/i3gs][i3gs]]
855:PROPERTIES:
856:header-args+: :tangle ~/.config/i3gs/config
857:END:
858
6a056822 859#+begin_src conf :comments none :tangle no
a5547504
AB
860borders_width=0 0 2 0
861separator_width=10
862
be33ab1f
AB
863#[mpd]
864#preset=MPD
865#title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
866#borders_color=#7FDBFF
a5547504
AB
867
868[ram]
869preset=RAM
870title=<span weight='heavy' fgcolor='#3D9970'> </span>
871borders_color=#3D9970
872
be33ab1f
AB
873#[cpu]
874#preset=CPU
875#title=<span weight='heavy' fgcolor='#2ECC40'> </span>
876#borders_color=#2ECC40
a5547504 877
be33ab1f
AB
878#[hdd]
879#preset=HDD
880#title=<span weight='heavy' fgcolor='#01FF70'> </span>
881#borders_color=#01FF70
a5547504 882
4fc8d5d2
AB
883[volume]
884command=volume-info
885title=<span weight='heavy' fgcolor='#7FDBFF'></span>
886borders_color=#7FDBFF
887
a5547504
AB
888[battery]
889preset=BAT
683f2865 890command=battery-percentage-time
a5547504
AB
891title=<span weight='heavy' fgcolor='#39CCCC'> </span>
892borders_color=#39CCCC
893
894[wifi]
895preset=WIFI
896title=<span weight='heavy' fgcolor='#01FF70'> </span>
897borders_color=#01FF70
898
899[date]
900preset=DATE
ce79d14b 901command=date '+%-I:%M, %a %b %d '
a5547504
AB
902title=<span weight='heavy' fgcolor='#FFDC00'> </span>
903borders_color=#FFDC00
904separator_width=0
905#+end_src
6a056822
AB
906
907** i3status
908:PROPERTIES:
909:header-args+: :tangle ~/.config/i3status/config
910:END:
911
912#+begin_src conf :comments none
913# i3status configuration file.
914# see "man i3status" for documentation.
915
916# It is important that this file is edited as UTF-8.
917# The following line should contain a sharp s:
918# ß
919# If the above line is not correctly displayed, fix your editor first!
920
921general {
922 colors = true
923 interval = 5
924}
925
e939ef1a 926# order += "ipv6"
6a056822 927order += "disk /"
e939ef1a 928order += "disk /data"
6a056822 929order += "wireless _first_"
e939ef1a
AB
930# order += "ethernet _first_"
931order += "battery 0"
25bd9e84 932order += "volume master"
6a056822
AB
933order += "load"
934order += "tztime local"
935
936wireless _first_ {
e939ef1a 937 format_up = "W:%quality %essid %ip"
6a056822
AB
938 format_down = "W: down"
939}
940
e939ef1a
AB
941# ethernet _first_ {
942# # if you use %speed, i3status requires root privileges
943# format_up = "E: %ip (%speed)"
944# format_down = "E: down"
945# }
946
947battery 0 {
948 format = "%status %percentage %remaining (%consumption)"
949 path = "/sys/class/power_supply/BAT%d/uevent"
25bd9e84
AB
950 low_threshold = "10"
951 threshold_type = "percentage"
952 last_full_capacity = true
e939ef1a
AB
953 integer_battery_capacity = true
954 hide_seconds = true
6a056822
AB
955}
956
957tztime local {
e939ef1a 958 format = "%-I:%M%P %a %b %d"
6a056822
AB
959}
960
25bd9e84
AB
961volume master {
962 format = "♪ %volume"
963 format_muted = "🔇 %volume"
964 device = "pulse"
965}
966
6a056822
AB
967load {
968 format = "%1min"
969}
970
971disk "/" {
e939ef1a
AB
972 format = "/ %avail"
973}
974
975disk "/data" {
976 format = "/data %avail"
6a056822
AB
977}
978#+end_src
979
be76c6db
AB
980** isync
981
982*** mbsyncrc
983:PROPERTIES:
984:header-args+: :tangle ~/.mbsyncrc
985:END:
986
987#+begin_src conf
988# Global defaults
989CopyArrivalDate yes
990
991######
992IMAPAccount amin
993Host nix.aminb.org
994User amin@aminb.org
995PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
996SSLType IMAPS
997
998IMAPStore amin-remote
999Account amin
1000
1001MaildirStore amin-local
1002Path ~/mail/amin/
1003Inbox ~/mail/amin/Inbox
1004SubFolders Verbatim
1005
1006Channel amin
1007Master :amin-remote:
1008Slave :amin-local:
1009Patterns * !dovecot*
1010Create Both
1011SyncState *
1012
1013######
1014IMAPAccount uwaterloo
1015Host connect.uwaterloo.ca
59027673 1016User abandali
be76c6db
AB
1017PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1018SSLType IMAPS
1019
1020IMAPStore uwaterloo-remote
1021Account uwaterloo
1022
1023MaildirStore uwaterloo-local
1024Path ~/mail/uwaterloo/
1025Inbox ~/mail/uwaterloo/Inbox
1026SubFolders Verbatim
1027
1028Channel uwaterloo
1029Master :uwaterloo-remote:
1030Slave :uwaterloo-local:
1031Patterns * !dovecot*
1032Create Both
1033SyncState *
1034#+end_src
1035
1036*** mbsync.service
1037:PROPERTIES:
1038:header-args+: :tangle ~/.config/systemd/user/mbsync.service
1039:END:
1040
1041#+begin_src conf :tangle no
1042[Unit]
1043Description=mbsync service
1044
1045[Service]
1046Type=oneshot
1047ExecStart=/usr/bin/mbsync -Va
1048StandardOutput=syslog
1049StandardError=syslog
1050#+end_src
1051
1052*** mbsync.timer
1053:PROPERTIES:
1054:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1055:END:
1056
1057#+begin_src conf :tangle no
1058[Unit]
1059Description=mbsync timer
1060
1061[Timer]
1062OnCalendar=*:0/15
1063Persistent=true
1064Unit=mbsync.service
1065
1066[Install]
1067WantedBy=timers.target
1068#+end_src
1069
a106372e
AB
1070** Latexmk
1071:PROPERTIES:
1072:header-args+: :tangle ~/.latexmkrc
1073:END:
1074
1075#+begin_src conf
1076$pdf_previewer = "start zathura %O %S";
1077$clean_ext = "aux out";
1078
1079# $pdf_update_method = 4;
1080# $pdf_update_command = "zathura %O %S";
1081
1082# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1083# by Ctrl+click in the PDF.
1084# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1085# editor.
1086# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1087#+end_src
1088
1089** libinput
1090
1091Improve XPS 15 9560's touchpad experience.
1092
1093# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1094#+begin_src conf :tangle no
1095Section "InputClass"
1096 Identifier "libinput touchpad catchall"
1097 Driver "libinput"
1098 MatchIsTouchpad "on"
1099 Option "ClickMethod" "clickfinger"
1100 Option "NaturalScrolling" "true"
1101 Option "Tapping" "on"
1102 Option "TappingButtonMap" "lrm"
1103EndSection
1104#+end_src
1105
59027673
AB
1106** mpd
1107:PROPERTIES:
1108:header-args+: :tangle ~/.config/mpd/mpd.conf
1109:END:
1110
1111#+begin_src conf
1112# An example configuration file for MPD.
1113# Read the user manual for documentation: http://www.musicpd.org/doc/user/
1114
1115
1116# Files and directories #######################################################
1117#
1118# This setting controls the top directory which MPD will search to discover the
1119# available audio files and add them to the daemon's online database. This
1120# setting defaults to the XDG directory, otherwise the music directory will be
1121# be disabled and audio files will only be accepted over ipc socket (using
1122# file:// protocol) or streaming files over an accepted protocol.
1123#
1124music_directory "~/usr/music"
1125#
1126# This setting sets the MPD internal playlist directory. The purpose of this
1127# directory is storage for playlists created by MPD. The server will use
1128# playlist files not created by the server but only if they are in the MPD
1129# format. This setting defaults to playlist saving being disabled.
1130#
1131playlist_directory "~/.mpd/playlists"
1132#
1133# This setting sets the location of the MPD database. This file is used to
1134# load the database at server start up and store the database while the
1135# server is not up. This setting defaults to disabled which will allow
1136# MPD to accept files over ipc socket (using file:// protocol) or streaming
1137# files over an accepted protocol.
1138#
1139db_file "~/.mpd/database"
1140#
1141# These settings are the locations for the daemon log files for the daemon.
1142# These logs are great for troubleshooting, depending on your log_level
1143# settings.
1144#
1145# The special value "syslog" makes MPD use the local syslog daemon. This
1146# setting defaults to logging to syslog, otherwise logging is disabled.
1147#
1148log_file "~/.mpd/log"
1149#
1150# This setting sets the location of the file which stores the process ID
1151# for use of mpd --kill and some init scripts. This setting is disabled by
1152# default and the pid file will not be stored.
1153#
1154pid_file "~/.mpd/pid"
1155#
1156# This setting sets the location of the file which contains information about
1157# most variables to get MPD back into the same general shape it was in before
1158# it was brought down. This setting is disabled by default and the server
1159# state will be reset on server start up.
1160#
1161state_file "~/.mpd/state"
1162#
1163# The location of the sticker database. This is a database which
1164# manages dynamic information attached to songs.
1165#
1166sticker_file "~/.mpd/sticker.sql"
1167#
1168###############################################################################
1169
1170
1171# General music daemon options ################################################
1172#
1173# This setting specifies the user that MPD will run as. MPD should never run as
1174# root and you may use this setting to make MPD change its user ID after
1175# initialization. This setting is disabled by default and MPD is run as the
1176# current user.
1177#
1178#user "nobody"
1179#
1180# This setting specifies the group that MPD will run as. If not specified
1181# primary group of user specified with "user" setting will be used (if set).
1182# This is useful if MPD needs to be a member of group such as "audio" to
1183# have permission to use sound card.
1184#
1185#group "nogroup"
1186#
1187# This setting sets the address for the daemon to listen on. Careful attention
1188# should be paid if this is assigned to anything other then the default, any.
1189# This setting can deny access to control of the daemon. Not effective if
1190# systemd socket activiation is in use.
1191#
1192# For network
1193#bind_to_address "any"
1194#
1195# And for Unix Socket
1196#bind_to_address "~/.mpd/socket"
1197#
1198# This setting is the TCP port that is desired for the daemon to get assigned
1199# to.
1200#
1201#port "6600"
1202#
1203# This setting controls the type of information which is logged. Available
1204# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1205# argument is recommended for troubleshooting, though can quickly stretch
1206# available resources on limited hardware storage.
1207#
1208#log_level "default"
1209#
1210# If you have a problem with your MP3s ending abruptly it is recommended that
1211# you set this argument to "no" to attempt to fix the problem. If this solves
1212# the problem, it is highly recommended to fix the MP3 files with vbrfix
1213# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1214# point gapless MP3 playback can be enabled.
1215#
1216#gapless_mp3_playback "yes"
1217#
1218# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1219# of starting playback after startup.
1220#
1221#restore_paused "no"
1222#
1223# This setting enables MPD to create playlists in a format usable by other
1224# music players.
1225#
1226#save_absolute_paths_in_playlists "no"
1227#
1228# This setting defines a list of tag types that will be extracted during the
1229# audio file discovery process. The complete list of possible values can be
1230# found in the user manual.
1231#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1232#
1233# This setting enables automatic update of MPD's database when files in
1234# music_directory are changed.
1235#
1236#auto_update "yes"
1237#
1238# Limit the depth of the directories being watched, 0 means only watch
1239# the music directory itself. There is no limit by default.
1240#
1241#auto_update_depth "3"
1242#
1243###############################################################################
1244
1245
1246# Symbolic link behavior ######################################################
1247#
1248# If this setting is set to "yes", MPD will discover audio files by following
1249# symbolic links outside of the configured music_directory.
1250#
1251#follow_outside_symlinks "yes"
1252#
1253# If this setting is set to "yes", MPD will discover audio files by following
1254# symbolic links inside of the configured music_directory.
1255#
1256#follow_inside_symlinks "yes"
1257#
1258###############################################################################
1259
1260
1261# Zeroconf / Avahi Service Discovery ##########################################
1262#
1263# If this setting is set to "yes", service information will be published with
1264# Zeroconf / Avahi.
1265#
1266#zeroconf_enabled "yes"
1267#
1268# The argument to this setting will be the Zeroconf / Avahi unique name for
1269# this MPD server on the network.
1270#
1271#zeroconf_name "Music Player"
1272#
1273###############################################################################
1274
1275
1276# Permissions #################################################################
1277#
1278# If this setting is set, MPD will require password authorization. The password
1279# setting can be specified multiple times for different password profiles.
1280#
1281#password "password@read,add,control,admin"
1282#
1283# This setting specifies the permissions a user has who has not yet logged in.
1284#
1285#default_permissions "read,add,control,admin"
1286#
1287###############################################################################
1288
1289
1290# Database #######################################################################
1291#
1292
1293#database {
1294# plugin "proxy"
1295# host "other.mpd.host"
1296# port "6600"
1297#}
1298
1299# Input #######################################################################
1300#
1301
1302input {
1303 plugin "curl"
1304# proxy "proxy.isp.com:8080"
1305# proxy_user "user"
1306# proxy_password "password"
1307}
1308
1309#
1310###############################################################################
1311
1312# Audio Output ################################################################
1313#
1314
1315audio_output {
1316 type "pulse"
1317 name "pulse audio"
1318}
1319
1320audio_output {
1321 type "fifo"
1322 name "my_fifo"
1323 path "/tmp/mpd.fifo"
1324 format "44100:16:2"
1325}
1326
1327# MPD supports various audio output types, as well as playing through multiple
1328# audio outputs at the same time, through multiple audio_output settings
1329# blocks. Setting this block is optional, though the server will only attempt
1330# autodetection for one sound card.
1331#
1332# An example of an ALSA output:
1333#
1334#audio_output {
1335# type "alsa"
1336# name "My ALSA Device"
1337## device "hw:0,0" # optional
1338## mixer_type "hardware" # optional
1339## mixer_device "default" # optional
1340## mixer_control "PCM" # optional
1341## mixer_index "0" # optional
1342#}
1343#
1344# An example of an OSS output:
1345#
1346#audio_output {
1347# type "oss"
1348# name "My OSS Device"
1349## device "/dev/dsp" # optional
1350## mixer_type "hardware" # optional
1351## mixer_device "/dev/mixer" # optional
1352## mixer_control "PCM" # optional
1353#}
1354#
1355# An example of a shout output (for streaming to Icecast):
1356#
1357#audio_output {
1358# type "shout"
1359# encoder "vorbis" # optional
1360# name "My Shout Stream"
1361# host "localhost"
1362# port "8000"
1363# mount "/mpd.ogg"
1364# password "hackme"
1365# quality "5.0"
1366# bitrate "128"
1367# format "44100:16:1"
1368## protocol "icecast2" # optional
1369## user "source" # optional
1370## description "My Stream Description" # optional
1371## url "http://example.com" # optional
1372## genre "jazz" # optional
1373## public "no" # optional
1374## timeout "2" # optional
1375## mixer_type "software" # optional
1376#}
1377#
1378# An example of a recorder output:
1379#
1380#audio_output {
1381# type "recorder"
1382# name "My recorder"
1383# encoder "vorbis" # optional, vorbis or lame
1384# path "/var/lib/mpd/recorder/mpd.ogg"
1385## quality "5.0" # do not define if bitrate is defined
1386# bitrate "128" # do not define if quality is defined
1387# format "44100:16:1"
1388#}
1389#
1390# An example of a httpd output (built-in HTTP streaming server):
1391#
1392#audio_output {
1393# type "httpd"
1394# name "My HTTP Stream"
1395# encoder "vorbis" # optional, vorbis or lame
1396# port "8000"
1397# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1398## quality "5.0" # do not define if bitrate is defined
1399# bitrate "128" # do not define if quality is defined
1400# format "44100:16:1"
1401# max_clients "0" # optional 0=no limit
1402#}
1403#
1404# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1405#
1406#audio_output {
1407# type "pulse"
1408# name "My Pulse Output"
1409## server "remote_server" # optional
1410## sink "remote_server_sink" # optional
1411#}
1412#
1413# An example of a winmm output (Windows multimedia API).
1414#
1415#audio_output {
1416# type "winmm"
1417# name "My WinMM output"
1418## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1419# or
1420## device "0" # optional
1421## mixer_type "hardware" # optional
1422#}
1423#
1424# An example of an openal output.
1425#
1426#audio_output {
1427# type "openal"
1428# name "My OpenAL output"
1429## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1430#}
1431#
1432# An example of an sndio output.
1433#
1434#audio_output {
1435# type "sndio"
1436# name "sndio output"
1437# mixer_type "software"
1438#}
1439#
1440# An example of an OS X output:
1441#
1442#audio_output {
1443# type "osx"
1444# name "My OS X Device"
1445## device "Built-in Output" # optional
1446## channel_map "-1,-1,0,1" # optional
1447#}
1448#
1449## Example "pipe" output:
1450#
1451#audio_output {
1452# type "pipe"
1453# name "my pipe"
1454# command "aplay -f cd 2>/dev/null"
1455## Or if you're want to use AudioCompress
1456# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1457## Or to send raw PCM stream through PCM:
1458# command "nc example.org 8765"
1459# format "44100:16:2"
1460#}
1461#
1462## An example of a null output (for no audio output):
1463#
1464#audio_output {
1465# type "null"
1466# name "My Null Output"
1467# mixer_type "none" # optional
1468#}
1469#
1470###############################################################################
1471
1472
1473# Normalization automatic volume adjustments ##################################
1474#
1475# This setting specifies the type of ReplayGain to use. This setting can have
1476# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1477# chooses between "track" and "album" depending on the current state of
1478# random playback. If random playback is enabled then "track" mode is used.
1479# See <http://www.replaygain.org> for more details about ReplayGain.
1480# This setting is off by default.
1481#
1482#replaygain "album"
1483#
1484# This setting sets the pre-amp used for files that have ReplayGain tags. By
1485# default this setting is disabled.
1486#
1487#replaygain_preamp "0"
1488#
1489# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1490# By default this setting is disabled.
1491#
1492#replaygain_missing_preamp "0"
1493#
1494# This setting enables or disables ReplayGain limiting.
1495# MPD calculates actual amplification based on the ReplayGain tags
1496# and replaygain_preamp / replaygain_missing_preamp setting.
1497# If replaygain_limit is enabled MPD will never amplify audio signal
1498# above its original level. If replaygain_limit is disabled such amplification
1499# might occur. By default this setting is enabled.
1500#
1501#replaygain_limit "yes"
1502#
1503# This setting enables on-the-fly normalization volume adjustment. This will
1504# result in the volume of all playing audio to be adjusted so the output has
1505# equal "loudness". This setting is disabled by default.
1506#
1507#volume_normalization "no"
1508#
1509###############################################################################
1510
1511# Character Encoding ##########################################################
1512#
1513# If file or directory names do not display correctly for your locale then you
1514# may need to modify this setting.
1515#
1516#filesystem_charset "UTF-8"
1517#
1518###############################################################################
1519#+end_src
1520
1521** msmtp
1522:PROPERTIES:
1523:header-args+: :tangle ~/.msmtprc
1524:END:
1525
1526#+begin_src conf
1527# Set default values for all following accounts.
1528defaults
1529port 587
1530tls on
1531auth on
1532#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1533logfile ~/.msmtp.log
1534
1535# aminb
1536account aminb
1537host nix.aminb.org
55879085
AB
1538# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1539tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
59027673
AB
1540tls_starttls on
1541from amin@aminb.org
1542user amin@aminb.org
1543passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1544
1545# gnu
1546account gnu
1547host fencepost.gnu.org
1e55aaa3
AB
1548# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1549tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
59027673
AB
1550tls_starttls on
1551from aminb@gnu.org
1552user aminb
1553passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1554
835adbdb
AB
1555# gnu (amin)
1556account gnu-amin : gnu
1557from amin@gnu.org
1558
1559# gnu (mab)
9e568495
AB
1560account gnu-mab : gnu
1561from mab@gnu.org
1562
59027673
AB
1563# uwaterloo
1564account uwaterloo
1565host connect.uwaterloo.ca
1566tls_starttls on
1567from abandali@uwaterloo.ca
1568user abandali
1569passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1570tls_trust_file /etc/ssl/certs/ca-certificates.crt
1571
59027673
AB
1572# Set a default account
1573account default : aminb
1574#+end_src
1575
1576** ncmpcpp
1577
1578*** config
1579:PROPERTIES:
1580:header-args+: :tangle ~/.ncmpcpp/config
1581:END:
1582
1583#+begin_src conf :tangle no
1584##############################################################
1585## This is the example configuration file. Copy it to ##
1586## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1587## and set up your preferences. ##
1588##############################################################
1589#
1590##### directories ######
1591##
1592## Directory for storing ncmpcpp related files.
1593## Changing it is useful if you want to store
1594## everything somewhere else and provide command
1595## line setting for alternative location to config
1596## file which defines that while launching ncmpcpp.
1597##
1598#
1599ncmpcpp_directory = ~/.ncmpcpp
1600#
1601##
1602## Directory for storing downloaded lyrics. It
1603## defaults to ~/.lyrics since other MPD clients
1604## (eg. ncmpc) also use that location.
1605##
1606#
1607#lyrics_directory = ~/.lyrics
1608#
1609##### connection settings #####
1610#
1611#mpd_host = localhost
1612#
1613#mpd_port = 6600
1614#
1615#mpd_connection_timeout = 5
1616#
1617## Needed for tag editor and file operations to work.
1618##
1619mpd_music_dir = ~/usr/music
1620#
1621#mpd_crossfade_time = 5
1622#
1623##### music visualizer #####
1624##
1625## Note: In order to make music visualizer work you'll
1626## need to use mpd fifo output, whose format parameter
1627## has to be set to 44100:16:1 for mono visualization
1628## or 44100:16:2 for stereo visualization. Example
1629## configuration (it has to be put into mpd.conf):
1630##
1631## audio_output {
1632## type "fifo"
1633## name "Visualizer feed"
1634## path "/tmp/mpd.fifo"
1635## format "44100:16:2"
1636## }
1637##
1638#
1639visualizer_fifo_path = /tmp/mpd.fifo
1640#
1641##
1642## Note: Below parameter is needed for ncmpcpp
1643## to determine which output provides data for
1644## visualizer and thus allow syncing between
1645## visualization and sound as currently there
1646## are some problems with it.
1647##
1648#
1649visualizer_output_name = my fifo
1650#
1651##
1652## If you set format to 44100:16:2, make it 'yes'.
1653##
1654visualizer_in_stereo = yes
1655#
1656##
1657## Multiply received samples by given value. Very
1658## useful for proper visualization of quiet music.
1659##
1660#visualizer_sample_multiplier = 1
1661#
1662##
1663## Note: Below parameter defines how often ncmpcpp
1664## has to "synchronize" visualizer and audio outputs.
1665## 30 seconds is optimal value, but if you experience
1666## synchronization problems, set it to lower value.
1667## Keep in mind that sane values start with >=10.
1668##
1669#
1670visualizer_sync_interval = 30
1671#
1672##
1673## Note: To enable spectrum frequency visualization
1674## you need to compile ncmpcpp with fftw3 support.
1675##
1676#
1677## Available values: spectrum, wave, wave_filled, ellipse.
1678##
1679visualizer_type = spectrum
1680#
1681#visualizer_look = ●▮
1682visualizer_look = "●•"
1683#
1684#visualizer_color = blue, cyan, green, yellow, magenta, red
1685#
1686## Alternative subset of 256 colors for terminals that support it.
1687##
1688#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1689#
1690##### system encoding #####
1691##
1692## ncmpcpp should detect your charset encoding
1693## but if it failed to do so, you can specify
1694## charset encoding you are using here.
1695##
1696## Note: You can see whether your ncmpcpp build
1697## supports charset detection by checking output
1698## of `ncmpcpp --version`.
1699##
1700## Note: Since MPD uses UTF-8 by default, setting
1701## this option makes sense only if your encoding
1702## is different.
1703##
1704#
1705#system_encoding = ""
1706#
1707##### delays #####
1708#
1709## Time of inactivity (in seconds) after playlist
1710## highlighting will be disabled (0 = always on).
1711##
1712#playlist_disable_highlight_delay = 5
1713#
1714## Defines how long messages are supposed to be visible.
1715##
1716#message_delay_time = 5
1717#
1718##### song format #####
1719##
1720## For a song format you can use:
1721##
1722## %l - length
1723## %f - filename
1724## %D - directory
1725## %a - artist
1726## %A - album artist
1727## %t - title
1728## %b - album
1729## %y - date
1730## %n - track number (01/12 -> 01)
1731## %N - full track info (01/12 -> 01/12)
1732## %g - genre
1733## %c - composer
1734## %p - performer
1735## %d - disc
1736## %C - comment
1737## %P - priority
1738## $R - begin right alignment
1739##
1740## If you want to make sure that a part of the format is displayed
1741## only when certain tags are present, you can archieve it by
1742## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1743## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1744## It is also possible to define a list of alternatives by providing
1745## several groups and separating them with '|', e.g. '{%t}|{%f}'
1746## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1747## present.
1748##
1749## Note: If you want to set limit on maximal length of a tag, just
1750## put the appropriate number between % and character that defines
1751## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1752##
1753## In addition, formats support markers used for text attributes.
1754## They are followed by character '$'. After that you can put:
1755##
1756## - 0 - default window color (discards all other colors)
1757## - 1 - black
1758## - 2 - red
1759## - 3 - green
1760## - 4 - yellow
1761## - 5 - blue
1762## - 6 - magenta
1763## - 7 - cyan
1764## - 8 - white
1765## - 9 - end of current color
1766## - b - bold text
1767## - u - underline text
1768## - r - reverse colors
1769## - a - use alternative character set
1770##
1771## If you don't want to use a non-color attribute anymore, just put it
1772## again, but this time insert character '/' between '$' and attribute
1773## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1774## or filename with reversed colors.
1775##
1776## If you want to use 256 colors and/or background colors in formats
1777## (the naming scheme is described below in section about color
1778## definitions), it can be done with the syntax $(COLOR), e.g. to set
1779## the artist tag to one of the non-standard colors and make it have
1780## yellow background, you need to write $(197_yellow)%a$(end). Note
1781## that for standard colors this is interchangable with attributes
1782## listed above.
1783##
1784## Note: colors can be nested.
1785##
1786#
1787#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1788#
1789#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1790#
1791#song_library_format = {%n - }{%t}|{%f}
1792#
1793#
1794#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1795#
1796#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1797#
1798#now_playing_prefix = $b
1799#
1800#now_playing_suffix = $/b
1801#
1802#browser_playlist_prefix = "$2playlist$9 "
1803#
1804#selected_item_prefix = $6
1805#
1806#selected_item_suffix = $9
1807#
1808#modified_item_prefix = $3> $9
1809#
1810##
1811## Note: attributes are not supported for the following variables.
1812##
1813#song_window_title_format = {%a - }{%t}|{%f}
1814##
1815## Note: Below variables are used for sorting songs in browser.
1816## The sort mode determines how songs are sorted, and can be used
1817## in combination with a sort format to specify a custom sorting format.
1818## Available values for browser_sort_mode are "name", "mtime", "format"
1819## and "noop".
1820##
1821#
1822#browser_sort_mode = name
1823#
1824#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1825#
1826##### columns settings #####
1827##
1828## syntax of song columns list format is "column column etc."
1829##
1830## - syntax for each column is:
1831##
1832## (width of the column)[color of the column]{displayed tag}
1833##
1834## Note: Width is by default in %, if you want a column to
1835## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1836## will be the column that take 10% of screen (so the real width
1837## will depend on actual screen size), whereas (10f)[white]{a}
1838## will take 10 terminal cells, no matter how wide the screen is.
1839##
1840## - color is optional (if you want the default one,
1841## leave the field empty).
1842##
1843## Note: You can give a column additional attributes by putting appropriate
1844## character after displayed tag character. Available attributes are:
1845##
1846## - r - column will be right aligned
1847## - E - if tag is empty, empty tag marker won't be displayed
1848##
1849## You can also:
1850##
1851## - give a column custom name by putting it after attributes,
1852## separated with character ':', e.g. {lr:Length} gives you
1853## right aligned column of lengths named "Length".
1854##
1855## - define sequence of tags, that have to be displayed in case
1856## predecessor is empty in a way similar to the one in classic
1857## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1858## creates column named "Owner" that tries to display artist
1859## tag and then composer and performer if previous ones are
1860## not available.
1861##
1862#
1863#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1864#
1865##### various settings #####
1866#
1867##
1868## Note: Custom command that will be executed each
1869## time song changes. Useful for notifications etc.
1870##
1871#execute_on_song_change = ""
1872#
1873#playlist_show_mpd_host = no
1874#
1875#playlist_show_remaining_time = no
1876#
1877#playlist_shorten_total_times = no
1878#
1879#playlist_separate_albums = no
1880#
1881##
1882## Note: Possible display modes: classic, columns.
1883##
1884#playlist_display_mode = columns
1885#
1886#browser_display_mode = classic
1887#
1888#search_engine_display_mode = classic
1889#
1890#playlist_editor_display_mode = classic
1891#
1892#discard_colors_if_item_is_selected = yes
1893#
1894#incremental_seeking = yes
1895#
1896#seek_time = 1
1897#
1898#volume_change_step = 2
1899#
1900#autocenter_mode = no
1901#
1902#centered_cursor = no
1903#
1904##
1905## Note: You can specify third character which will
1906## be used to build 'empty' part of progressbar.
1907##
1908#progressbar_look = =>
1909progressbar_look = "─╼╶"
1910#progressbar_look = "─⊙╶"
1911#
1912#progressbar_boldness = yes
1913#
1914## Available values: database, playlist.
1915##
1916#default_place_to_search_in = database
1917#
1918## Available values: classic, alternative.
1919##
1920#user_interface = classic
1921#
1922#data_fetching_delay = yes
1923#
1924## Available values: artist, album_artist, date, genre, composer, performer.
1925##
1926#media_library_primary_tag = artist
1927#
1928## Available values: wrapped, normal.
1929##
1930#default_find_mode = wrapped
1931#
1932#default_tag_editor_pattern = %n - %t
1933#
1934#header_visibility = yes
1935#
1936#statusbar_visibility = yes
1937#
1938#titles_visibility = yes
1939#
1940#header_text_scrolling = yes
1941#
1942#cyclic_scrolling = no
1943#
1944#lines_scrolled = 2
1945#
1946#follow_now_playing_lyrics = no
1947#
1948#fetch_lyrics_for_current_song_in_background = no
1949#
1950#store_lyrics_in_song_dir = no
1951#
1952#generate_win32_compatible_filenames = yes
1953#
1954#allow_for_physical_item_deletion = no
1955#
1956##
1957## Note: If you set this variable, ncmpcpp will try to
1958## get info from last.fm in language you set and if it
1959## fails, it will fall back to english. Otherwise it will
1960## use english the first time.
1961##
1962## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1963##
1964#lastfm_preferred_language = en
1965#
1966#show_hidden_files_in_local_browser = no
1967#
1968##
1969## How shall screen switcher work?
1970##
1971## - "previous" - switch between the current and previous screen.
1972## - "screen1,...,screenN" - switch between given sequence of screens.
1973##
1974## Screens available for use: help, playlist, browser, search_engine,
1975## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1976##
1977#screen_switcher_mode = playlist, browser
1978#
1979##
1980## Note: You can define startup screen
1981## by choosing screen from the list above.
1982##
1983#startup_screen = playlist
1984#
1985##
1986## Note: You can define startup slave screen
1987## by choosing screen from the list above or
1988## an empty value for no slave screen.
1989##
1990#startup_slave_screen = ""
1991#
1992#startup_slave_screen_focus = no
1993#
1994##
1995## Default width of locked screen (in %).
1996## Acceptable values are from 20 to 80.
1997##
1998#
1999#locked_screen_width_part = 50
2000#
2001#ask_for_locked_screen_width_part = yes
2002#
2003#jump_to_now_playing_song_at_start = yes
2004#
2005#ask_before_clearing_playlists = yes
2006#
2007#clock_display_seconds = no
2008#
2009#display_volume_level = yes
2010#
2011#display_bitrate = no
2012#
2013#display_remaining_time = no
2014#
2015## Available values: none, basic, extended, perl.
2016##
2017#regular_expressions = perl
2018#
2019##
2020## Note: If below is enabled, ncmpcpp will ignore leading
2021## "The" word while sorting items in browser, tags in
2022## media library, etc.
2023##
2024#ignore_leading_the = no
2025#
2026#block_search_constraints_change_if_items_found = yes
2027#
2028#mouse_support = yes
2029#
2030#mouse_list_scroll_whole_page = yes
2031#
2032#empty_tag_marker = <empty>
2033#
2034#tags_separator = " | "
2035#
2036#tag_editor_extended_numeration = no
2037#
2038#media_library_sort_by_mtime = no
2039#
2040#enable_window_title = yes
2041#
2042##
2043## Note: You can choose default search mode for search
2044## engine. Available modes are:
2045##
2046## - 1 - use mpd built-in searching (no regexes, pattern matching)
2047## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2048## but if your mpd is on a remote machine, downloading big database
2049## to process it can take a while
2050## - 3 - match only exact values (this mode uses mpd function for searching
2051## in database and local one for searching in current playlist)
2052##
2053#
2054#search_engine_default_search_mode = 1
2055#
2056#external_editor = nano
2057#
2058## Note: set to yes if external editor is a console application.
2059##
2060#use_console_editor = yes
2061#
2062##### colors definitions #####
2063##
2064## It is possible to set a background color by setting a color
2065## value "<foreground>_<background>", e.g. red_black will set
2066## foregound color to red and background color to black.
2067##
2068## In addition, for terminals that support 256 colors it
2069## is possible to set one of them by using a number in range
2070## [1, 256] instead of color name, e.g. numerical value
2071## corresponding to red_black is 2_1. To find out if the
2072## terminal supports 256 colors, run ncmpcpp and check out
2073## the bottom of the help screen for list of available colors
2074## and their numerical values.
2075##
2076## Note: due to technical limitations of ncurses, if 256 colors
2077## are used, it is possible to either use only the colors with
2078## default background color, or all pairs from 1_1 up to 254_127,
2079## depending on the ncurses version used.
2080##
2081#
2082#colors_enabled = yes
2083#
2084#empty_tag_color = cyan
2085#
2086#header_window_color = default
2087#
2088#volume_color = default
2089#
2090#state_line_color = default
2091#
2092#state_flags_color = default
2093#
2094#main_window_color = yellow
2095#
2096#color1 = white
2097#
2098#color2 = green
2099#
2100#main_window_highlight_color = yellow
2101#
2102#progressbar_color = black
2103#
2104#progressbar_elapsed_color = green
2105#
2106#statusbar_color = default
2107#
2108#alternative_ui_separator_color = black
2109#
2110#active_column_color = red
2111#
2112#window_border_color = green
2113#
2114#active_window_border = red
2115#
2116#+end_src
2117
2118*** bindings
2119:PROPERTIES:
2120:header-args+: :tangle ~/.ncmpcpp/bindings
2121:END:
2122
2123#+begin_src conf :tangle no
2124def_key "j"
2125 scroll_down
2126def_key "k"
2127 scroll_up
2128
2129def_key "ctrl-u"
2130 page_up
2131def_key "ctrl-d"
2132 page_down
2133
2134def_key "h"
2135 previous_column
2136def_key "l"
2137 next_column
2138
2139def_key "."
2140 show_lyrics
2141
2142def_key "n"
2143 next_found_item
2144def_key "N"
2145 previous_found_item
2146
2147def_key "J"
2148 move_sort_order_down
2149def_key "K"
2150 move_sort_order_up
2151#+end_src
2152
25869427
AB
2153** notmuch
2154
2155*** notmuch-config
2156:PROPERTIES:
2157:header-args+: :tangle ~/.notmuch-config
2158:END:
2159
2160#+begin_src conf
2161# .notmuch-config - Configuration file for the notmuch mail system
2162#
2163# For more information about notmuch, see https://notmuchmail.org
2164
2165# Database configuration
2166#
2167# The only value supported here is 'path' which should be the top-level
2168# directory where your mail currently exists and to where mail will be
2169# delivered in the future. Files should be individual email messages.
2170# Notmuch will store its database within a sub-directory of the path
2171# configured here named ".notmuch".
2172#
2173[database]
2174path=/home/amin/mail
2175
2176# User configuration
2177#
2178# Here is where you can let notmuch know how you would like to be
2179# addressed. Valid settings are
2180#
2181# name Your full name.
2182# primary_email Your primary email address.
2183# other_email A list (separated by ';') of other email addresses
2184# at which you receive email.
2185#
2186# Notmuch will use the various email addresses configured here when
2187# formatting replies. It will avoid including your own addresses in the
2188# recipient list of replies, and will set the From address based on the
2189# address to which the original email was addressed.
2190#
2191[user]
2192name=Amin Bandali
2193primary_email=amin@aminb.org
835adbdb 2194other_email=amin@gnu.org;abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
25869427
AB
2195
2196# Configuration for "notmuch new"
2197#
2198# The following options are supported here:
2199#
2200# tags A list (separated by ';') of the tags that will be
2201# added to all messages incorporated by "notmuch new".
2202#
2203# ignore A list (separated by ';') of file and directory names
2204# that will not be searched for messages by "notmuch new".
2205#
2206# NOTE: *Every* file/directory that goes by one of those
2207# names will be ignored, independent of its depth/location
2208# in the mail store.
2209#
2210[new]
2211tags=new;
2212#tags=unread;inbox;
18faca55 2213ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
25869427
AB
2214
2215# Search configuration
2216#
2217# The following option is supported here:
2218#
2219# exclude_tags
2220# A ;-separated list of tags that will be excluded from
2221# search results by default. Using an excluded tag in a
2222# query will override that exclusion.
2223#
2224[search]
2225exclude_tags=deleted;spam;
2226
2227# Maildir compatibility configuration
2228#
2229# The following option is supported here:
2230#
2231# synchronize_flags Valid values are true and false.
2232#
2233# If true, then the following maildir flags (in message filenames)
2234# will be synchronized with the corresponding notmuch tags:
2235#
2236# Flag Tag
2237# ---- -------
2238# D draft
2239# F flagged
2240# P passed
2241# R replied
2242# S unread (added when 'S' flag is not present)
2243#
2244# The "notmuch new" command will notice flag changes in filenames
2245# and update tags, while the "notmuch tag" and "notmuch restore"
2246# commands will notice tag changes and update flags in filenames
2247#
2248[maildir]
2249synchronize_flags=true
2250
2251# Cryptography related configuration
2252#
2253# The following option is supported here:
2254#
2255# gpg_path
2256# binary name or full path to invoke gpg.
2257#
2258[crypto]
2259gpg_path=gpg
2260#+end_src
2261
18faca55
AB
2262*** pre-new hook
2263:PROPERTIES:
2264:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2265:END:
2266
2267#+begin_src sh
2268touch /tmp/gnusieve.log
2269sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2270 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2271#+end_src
2272
25869427
AB
2273*** post-new hook
2274:PROPERTIES:
2275:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2276:END:
2277
2278#+begin_src sh
18faca55 2279# apply sent tag to messages sent by me
835adbdb 2280notmuch tag -new +sent -- from:amin@aminb.org or from:amin@gnu.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
18faca55
AB
2281
2282# initial tagging
b6c1036f 2283notmuch tag -latest -- tag:latest
53960d74 2284notmuch tag +inbox +unread +latest -new -- tag:new
25869427 2285
378b4afa 2286
25869427 2287# apply tags to lists
378b4afa
AB
2288
2289# <aminb>
18faca55 2290notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
378b4afa 2291notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
ddb0b1d4 2292
2a6e947b 2293notmuch tag -inbox +pay -- folder:amin/pay
74ef10b0 2294notmuch tag -inbox +banking -- folder:amin/banking
2a6e947b 2295notmuch tag -inbox +work -- folder:amin/work
378b4afa
AB
2296# </aminb>
2297
2298# <uw>
2a6e947b
AB
2299notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2300notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2301notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2302notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2303notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
378b4afa 2304
d5dbdde5 2305notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
378b4afa
AB
2306notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2307notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2308notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2309notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2310notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2311# </uw>
2312
2313# <gnu>
b6c1036f
AB
2314notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2315notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2316notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2317notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2318notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2319notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2320notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2321notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2322notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2323notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2324notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2325
2326notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2327notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2328notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2329notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2330
2331notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2332notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2333notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2334notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2335notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
ddb0b1d4 2336# </gnu>
b6232163
AB
2337
2338notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2339notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
25869427
AB
2340#+end_src
2341
2342*** notmuch.service
2343:PROPERTIES:
2344:header-args+: :tangle ~/.config/systemd/user/notmuch.service
2345:END:
2346
2347#+begin_src conf :tangle no
2348[Unit]
2349Description=notmuch service
2350
2351[Service]
2352Type=oneshot
2353ExecStart=/usr/bin/notmuch new
2354StandardOutput=syslog
2355StandardError=syslog
2356#+end_src
2357
2358*** notmuch.timer
2359:PROPERTIES:
2360:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2361:END:
2362
2363#+begin_src conf :tangle no
2364[Unit]
2365Description=notmuch timer
2366
2367[Timer]
2368OnCalendar=*:0/5
2369Persistent=true
2370Unit=notmuch.service
2371
2372[Install]
2373WantedBy=timers.target
2374#+end_src
2375
2376** offlineimap
2377
2378*** offlineimaprc
2379:PROPERTIES:
2380:header-args+: :tangle ~/.offlineimaprc
2381:END:
2382
2383#+begin_src conf :tangle no
2384[general]
2385pythonfile = ~/.offlineimap.py
2386accounts = Gmail, aminb
2387maxsyncaccounts = 3
2388
2389[Account Gmail]
2390localrepository = GmailL
2391remoterepository = GmailR
2392
2393[Account aminb]
2394localrepository = aminbL
2395remoterepository = aminbR
2396
2397[Repository GmailL]
2398type = Maildir
2399localfolders = ~/Maildir/Gmail
2400
2401[Repository GmailR]
2402type = IMAP
2403remotehost = imap.gmail.com
2404remoteusereval = mailuser("gmail")
2405remotepasseval = mailpasswd("gmail")
2406sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2407ssl = yes
2408folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2409maxconnections = 1
2410realdelete = no
2411
2412[Repository aminbL]
2413type = Maildir
2414localfolders = ~/Maildir/aminb
2415
2416[Repository aminbR]
2417type = IMAP
2418remotehost = mail.aminb.org
2419remoteusereval = mailuser("aminb")
2420remotepasseval = mailpasswd("aminb")
2421sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2422ssl = yes
2423folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2424maxconnections = 1
2425realdelete = no
2426#+end_src
2427
2428*** offlineimap.py
2429:PROPERTIES:
2430:header-args+: :tangle ~/.offlineimap.py
2431:END:
2432
2433#+begin_src python :tangle no
2434import os
2435import subprocess
2436
2437def mailpasswd(acct):
2438 acct = os.path.basename(acct)
2439 path = "/home/amin/.passwd/%s.gpg" % acct
2440 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2441 try:
2442 return subprocess.check_output(args).strip()
2443 except subprocess.CalledProcessError:
2444 return ""
2445
2446def mailuser(acct):
2447 acct = os.path.basename(acct)
2448 path = "/home/amin/.passwd/%s" % acct
2449 args = ["cat", path]
2450 try:
2451 return subprocess.check_output(args).strip()
2452 except subprocess.CalledProcessError:
2453 return ""
2454
2455def prime_gpg_agent():
2456 ret = False
2457 i = 1
2458 while not ret:
2459 ret = (mailpasswd("prime") == "prime")
2460 if i > 2:
2461 from offlineimap.ui import getglobalui
2462 sys.stderr.write("Error reading in passwords. Terminating.\n")
2463 getglobalui().terminate()
2464 i += 1
2465 return ret
2466
2467prime_gpg_agent()
2468#+end_src
2469
8e15d300
AB
2470** pigeonhole
2471*** gnu.sieve
2472:PROPERTIES:
2473:header-args+: :tangle ~/sieve/gnu.sieve :comments none
2474:END:
2475
2476#+begin_src conf
2477require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2478
2479if anyof (
2480 address :is "from" "webmasters@gnu.org",
2481 address :is "from" "webmasters-comment@gnu.org") {
2482 fileinto :create "webmasters";
2483 stop;
2484}
2485
2486include :personal "lists";
2487#+end_src
2488
2489*** lists.sieve
2490:PROPERTIES:
2491:header-args+: :tangle ~/sieve/lists.sieve :comments none
2492:END:
2493
2494#+begin_src conf
2495require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2496 "include" ];
2497
2498if anyof (
2499 header :contains "list-id" "<emacs-devel.gnu.org>",
378b4afa
AB
2500 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2501 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2502 header :contains "list-id" "<fencepost-users.gnu.org>",
8e15d300
AB
2503 header :contains "list-id" "<guix-devel.gnu.org>",
2504 header :contains "list-id" "<guile-devel.gnu.org>",
2505 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2506 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2507 header :contains "list-id" "<www-commits.gnu.org>",
2508 header :contains "list-id" "<www-discuss.gnu.org>",
8e15d300
AB
2509 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2510 header :contains "list-id" "<haskell-cafe.haskell.org>",
378b4afa 2511 header :contains "list-id" "<haskell-art.we.lurk.org>",
8e15d300
AB
2512 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2513 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2514 set :lower "listname" "${1}";
2515 fileinto :create "l/${listname}";
2516 }
2517}
b6c1036f
AB
2518
2519if anyof (
2520 header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2521 header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2522 header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2523 header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2524 header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2525 if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2526 set :lower "username" "${1}";
2527 set :lower "listname" "${2}";
2528 fileinto :create "l/${username}/${listname}";
2529 }
2530}
8e15d300
AB
2531#+end_src
2532
1656853a
AB
2533** polybar
2534
2535*** config
2536:PROPERTIES:
2537:header-args+: :tangle ~/.config/polybar/config
2538:END:
2539
2540#+begin_src conf :tangle no
2541;=====================================================
2542;
2543; To learn more about how to configure Polybar
2544; go to https://github.com/jaagr/polybar
2545;
2546; The README contains alot of information
2547;
2548;=====================================================
2549
2550[colors]
2551;background = ${xrdb:color0:#222}
2552background = #222
2553background-alt = #444
2554;foreground = ${xrdb:color7:#222}
2555foreground = #eee
2556foreground-alt = #888
2557primary = #ffb52a
2558secondary = #e60053
2559alert = #bd2c40
2560
2561[bar/main]
2562;monitor = ${env:MONITOR:HDMI-1}
2563width = 100%
2564height = 27
2565;offset-x = 1%
2566;offset-y = 1%
2567radius = 3.0
2568fixed-center = true
2569
2570background = ${colors.background}
2571foreground = ${colors.foreground}
2572
2573line-size = 3
2574line-color = #f00
2575
2576border-size = 4
2577border-color = #00000000
2578
2579padding-left = 0
2580padding-right = 2
2581
2582module-margin-left = 2
2583module-margin-right = 2
2584
2585font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2586font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2587font-2 = Wuncon Siji:pixelsize=10;1
2588font-3 = FontAwesome:pixelsize=10;1
2589
2590modules-left = bspwm xwindow
2591modules-center =
2592modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2593
2594tray-position = right
2595tray-padding = 1
2596;tray-transparent = true
2597;tray-background = #0063ff
2598tray-maxsize = 18
2599
2600wm-restack = bspwm
2601
2602;override-redirect = true
2603
2604scroll-up = bspwm-desknext
2605scroll-down = bspwm-deskprev
2606
2607[module/xwindow]
2608type = internal/xwindow
2609label = %title:0:50:...%
2610
2611[module/xkeyboard]
2612type = internal/xkeyboard
2613blacklist-0 = num lock
2614
2615format-prefix = " "
2616format-prefix-foreground = ${colors.foreground-alt}
2617format-prefix-underline = ${colors.secondary}
2618
2619label-layout = %layout%
2620label-layout-underline = ${colors.secondary}
2621
2622label-indicator-padding = 2
2623label-indicator-margin = 1
2624label-indicator-background = ${colors.secondary}
2625label-indicator-underline = ${colors.secondary}
2626
2627[module/filesystem]
2628type = internal/fs
2629interval = 25
2630
2631mount-0 = /
2632
2633label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2634label-unmounted = %mountpoint% not mounted
2635label-unmounted-foreground = ${colors.foreground-alt}
2636
2637[module/bspwm]
2638type = internal/bspwm
2639
2640label-focused = %index%
2641label-focused-background = ${colors.background-alt}
2642label-focused-underline= ${colors.primary}
2643label-focused-padding = 2
2644
2645label-occupied = %index%
2646label-occupied-padding = 2
2647
2648label-urgent = %index%!
2649label-urgent-background = ${colors.alert}
2650label-urgent-padding = 2
2651
2652label-empty = %index%
2653label-empty-foreground = ${colors.foreground-alt}
2654label-empty-padding = 2
2655
2656[module/i3]
2657type = internal/i3
2658format = <label-state> <label-mode>
2659index-sort = true
2660wrapping-scroll = false
2661
2662; Only show workspaces on the same output as the bar
2663;pin-workspaces = true
2664
2665label-mode-padding = 2
2666label-mode-foreground = #000
2667label-mode-background = ${colors.primary}
2668
2669; focused = Active workspace on focused monitor
2670label-focused = %index%
2671label-focused-background = ${module/bspwm.label-focused-background}
2672label-focused-underline = ${module/bspwm.label-focused-underline}
2673label-focused-padding = ${module/bspwm.label-focused-padding}
2674
2675; unfocused = Inactive workspace on any monitor
2676label-unfocused = %index%
2677label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2678
2679; visible = Active workspace on unfocused monitor
2680label-visible = %index%
2681label-visible-background = ${self.label-focused-background}
2682label-visible-underline = ${self.label-focused-underline}
2683label-visible-padding = ${self.label-focused-padding}
2684
2685; urgent = Workspace with urgency hint set
2686label-urgent = %index%
2687label-urgent-background = ${module/bspwm.label-urgent-background}
2688label-urgent-padding = ${module/bspwm.label-urgent-padding}
2689
2690[module/mpd]
2691type = internal/mpd
2692format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2693
2694icon-prev = 
2695icon-stop = 
2696icon-play = 
2697icon-pause = 
2698icon-next = 
2699
2700label-song-maxlen = 25
2701label-song-ellipsis = true
2702
2703[module/xbacklight]
2704type = internal/xbacklight
2705
2706format = <label> <bar>
2707label = BL
2708
2709bar-width = 10
2710bar-indicator = |
2711bar-indicator-foreground = #ff
2712bar-indicator-font = 2
2713bar-fill = ─
2714bar-fill-font = 2
2715bar-fill-foreground = #9f78e1
2716bar-empty = ─
2717bar-empty-font = 2
2718bar-empty-foreground = ${colors.foreground-alt}
2719
2720[module/backlight-acpi]
2721inherit = module/xbacklight
2722type = internal/backlight
2723;card = intel_backlight
2724card = mba6x_backlight
2725
2726[module/cpu]
2727type = internal/cpu
2728interval = 2
2729format-prefix = " "
2730format-prefix-foreground = ${colors.foreground-alt}
2731format-underline = #f90000
2732label = %percentage%%
2733
2734[module/memory]
2735type = internal/memory
2736interval = 2
2737format-prefix = " "
2738format-prefix-foreground = ${colors.foreground-alt}
2739format-underline = #4bffdc
2740label = %percentage_used%%
2741
2742[module/wlan]
2743type = internal/network
2744interface =
2745interval = 3.0
2746
2747format-connected = <ramp-signal> <label-connected>
2748format-connected-underline = #9f78e1
2749label-connected = %essid%
2750
2751format-disconnected =
2752;format-disconnected = <label-disconnected>
2753;format-disconnected-underline = ${self.format-connected-underline}
2754;label-disconnected = %ifname% disconnected
2755;label-disconnected-foreground = ${colors.foreground-alt}
2756
2757ramp-signal-0 = 
2758ramp-signal-1 = 
2759ramp-signal-2 = 
2760ramp-signal-3 = 
2761ramp-signal-4 = 
2762ramp-signal-foreground = ${colors.foreground-alt}
2763
2764[module/eth]
2765type = internal/network
2766interface =
2767interval = 3.0
2768
2769format-connected-underline = #55aa55
2770format-connected-prefix = " "
2771format-connected-prefix-foreground = ${colors.foreground-alt}
2772label-connected = %local_ip%
2773
2774format-disconnected =
2775;format-disconnected = <label-disconnected>
2776;format-disconnected-underline = ${self.format-connected-underline}
2777;label-disconnected = %ifname% disconnected
2778;label-disconnected-foreground = ${colors.foreground-alt}
2779
2780[module/date]
2781type = internal/date
2782interval = 5
2783
2784date =
2785date-alt = " %Y-%m-%d"
2786
2787time = %H:%M
2788time-alt = %H:%M:%S
2789
2790format-prefix = 
2791format-prefix-foreground = ${colors.foreground-alt}
2792format-underline = #0a6cf5
2793
2794label = %date% %time%
2795
2796[module/volume]
2797type = internal/volume
2798
2799format-volume = <label-volume> <bar-volume>
2800label-volume = vol
2801label-volume-foreground = ${root.foreground}
2802
2803format-muted-prefix = " "
2804format-muted-foreground = ${colors.foreground-alt}
2805label-muted = mute
2806
2807bar-volume-width = 10
2808bar-volume-foreground-0 = #55aa55
2809bar-volume-foreground-1 = #55aa55
2810bar-volume-foreground-2 = #55aa55
2811bar-volume-foreground-3 = #55aa55
2812bar-volume-foreground-4 = #55aa55
2813bar-volume-foreground-5 = #f5a70a
2814bar-volume-foreground-6 = #ff5555
2815bar-volume-gradient = false
2816bar-volume-indicator = |
2817bar-volume-indicator-font = 2
2818bar-volume-fill = ─
2819bar-volume-fill-font = 2
2820bar-volume-empty = ─
2821bar-volume-empty-font = 2
2822bar-volume-empty-foreground = ${colors.foreground-alt}
2823
2824[module/battery]
2825type = internal/battery
2826battery = BAT0
2827adapter = ADP1
2828full-at = 64
2829
2830format-charging = <animation-charging> <label-charging>
2831format-charging-underline = #ffb52a
2832
2833format-discharging = <ramp-capacity> <label-discharging>
2834format-discharging-underline = ${self.format-charging-underline}
2835
2836format-full-prefix = " "
2837format-full-prefix-foreground = ${colors.foreground-alt}
2838format-full-underline = ${self.format-charging-underline}
2839
2840ramp-capacity-0 = 
2841ramp-capacity-1 = 
2842ramp-capacity-2 = 
2843ramp-capacity-foreground = ${colors.foreground-alt}
2844
2845animation-charging-0 = 
2846animation-charging-1 = 
2847animation-charging-2 = 
2848animation-charging-foreground = ${colors.foreground-alt}
2849animation-charging-framerate = 750
2850
2851[module/temperature]
2852type = internal/temperature
2853thermal-zone = 1
2854warn-temperature = 66
2855
2856format = <ramp> <label>
2857format-underline = #f50a4d
2858format-warn = <ramp> <label-warn>
2859format-warn-underline = ${self.format-underline}
2860
2861label = %temperature%
2862label-warn = %temperature%
2863label-warn-foreground = ${colors.secondary}
2864
2865ramp-0 = 
2866ramp-1 = 
2867ramp-2 = 
2868ramp-foreground = ${colors.foreground-alt}
2869
2870[module/powermenu]
2871type = custom/menu
2872
2873format-spacing = 1
2874
2875label-open = 
2876label-open-foreground = ${colors.secondary}
2877label-close =  cancel
2878label-close-foreground = ${colors.secondary}
2879label-separator = |
2880label-separator-foreground = ${colors.foreground-alt}
2881
2882menu-0-0 = reboot
2883menu-0-0-exec = menu-open-1
2884menu-0-1 = power off
2885menu-0-1-exec = menu-open-2
2886
2887menu-1-0 = cancel
2888menu-1-0-exec = menu-open-0
2889menu-1-1 = reboot
2890menu-1-1-exec = sudo reboot
2891
2892menu-2-0 = power off
2893menu-2-0-exec = sudo poweroff
2894menu-2-1 = cancel
2895menu-2-1-exec = menu-open-0
2896
2897[module/mail]
2898type = custom/script
2899interval = 60
2900format = <label>
2901format-prefix = " "
2902format-prefix-foreground = ${colors.foreground-alt}
2903format-underline = #0a6cf5
2904exec = notmuch count tag:unread
2905
2906[settings]
2907screenchange-reload = true
2908;compositing-background = xor
2909;compositing-background = screen
2910;compositing-foreground = source
2911;compositing-border = over
2912
2913[global/wm]
2914margin-top = 0
2915margin-bottom = 0
2916
2917; vim:ft=dosini
2918#+end_src
2919
2920*** polybar-launch
2921:PROPERTIES:
2e877d14 2922:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
1656853a
AB
2923:END:
2924
2e877d14 2925#+begin_src sh :tangle no
1656853a
AB
2926# Terminate already running bar instances
2927killall -q polybar
2928
2929# Wait until the processes have been shut down
2930while pgrep -x polybar >/dev/null; do sleep 1; done
2931
2932# Launch main bar
2933polybar main &
2934
2935echo "Bars launched..."
2936#+end_src
2937
b165a3e5
AB
2938** PowerTOP
2939:PROPERTIES:
2940:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2941:END:
2942
2943#+begin_src conf
2944[Unit]
2945Description=Powertop tunings
2946
2947[Service]
2948ExecStart=/usr/bin/powertop --auto-tune
2949RemainAfterExit=true
2950
2951[Install]
2952WantedBy=multi-user.target
2953#+end_src
2954
1656853a
AB
2955** ranger
2956
2957*** rc.conf
2958:PROPERTIES:
2959:header-args+: :tangle ~/.config/ranger/rc.conf
2960:END:
2961
2962#+begin_src conf :tangle no
2963# ===================================================================
2964# This file contains the default startup commands for ranger.
2965# To change them, it is recommended to create the file
2966# ~/.config/ranger/rc.conf and add your custom commands there.
2967#
2968# If you copy this whole file there, you may want to set the environment
2969# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2970#
2971# The purpose of this file is mainly to define keybindings and settings.
2972# For running more complex python code, please create a plugin in "plugins/" or
2973# a command in "commands.py".
2974#
2975# Each line is a command that will be run before the user interface
2976# is initialized. As a result, you can not use commands which rely
2977# on the UI such as :delete or :mark.
2978# ===================================================================
2979
2980# ===================================================================
2981# == Options
2982# ===================================================================
2983
2984# How many columns are there, and what are their relative widths?
2985set column_ratios 1,3,4
2986
2987# Which files should be hidden? (regular expression)
2988set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2989
2990# Show hidden files? You can toggle this by typing 'zh'
2991set show_hidden false
2992
2993# Ask for a confirmation when running the "delete" command?
2994# Valid values are "always" (default), "never", "multiple"
2995# With "multiple", ranger will ask only if you delete multiple files at once.
2996set confirm_on_delete multiple
2997
2998# Which script is used to generate file previews?
2999# ranger ships with scope.sh, a script that calls external programs (see
3000# README for dependencies) to preview images, archives, etc.
3001set preview_script ~/.config/ranger/scope.sh
3002
3003# Use the external preview script or display simple plain text previews?
3004set use_preview_script true
3005
3006# Open all images in this directory when running certain image viewers
3007# like feh or sxiv? You can still open selected files by marking them.
3008set open_all_images true
3009
3010# Be aware of version control systems and display information.
3011set vcs_aware false
3012
3013# State of the three backends git, hg, bzr. The possible states are
3014# disabled, local (only show local info), enabled (show local and remote
3015# information).
3016set vcs_backend_git enabled
3017set vcs_backend_hg disabled
3018set vcs_backend_bzr disabled
3019
3020# Preview images in full color with the external command "w3mimgpreview"?
3021# This requires the console web browser "w3m" and a supported terminal.
3022# It has been successfully tested with "xterm" and "urxvt" without tmux.
3023set preview_images true
3024
3025# Use a unicode "..." character to mark cut-off filenames?
3026set unicode_ellipsis false
3027
3028# Show dotfiles in the bookmark preview box?
3029set show_hidden_bookmarks true
3030
3031# Which colorscheme to use? These colorschemes are available by default:
3032# default, jungle, snow
3033set colorscheme default
3034
3035# Preview files on the rightmost column?
3036# And collapse (shrink) the last column if there is nothing to preview?
3037set preview_files true
3038set preview_directories true
3039set collapse_preview true
3040
3041# Save the console history on exit?
3042set save_console_history true
3043
3044# Draw the status bar on top of the browser window (default: bottom)
3045set status_bar_on_top false
3046
3047# Draw a progress bar in the status bar which displays the average state of all
3048# currently running tasks which support progress bars?
3049set draw_progress_bar_in_status_bar true
3050
3051# Draw borders around columns?
3052set draw_borders true
3053
3054# Display the directory name in tabs?
3055set dirname_in_tabs false
3056
3057# Enable the mouse support?
3058set mouse_enabled true
3059
3060# Display the file size in the main column or status bar?
3061set display_size_in_main_column true
3062set display_size_in_status_bar true
3063
3064# Display files tags in all columns or only in main column?
3065set display_tags_in_all_columns true
3066
3067# Set a title for the window?
3068set update_title false
3069
3070# Set the title to "ranger" in the tmux program?
3071set update_tmux_title false
3072
3073# Shorten the title if it gets long? The number defines how many
3074# directories are displayed at once, 0 turns off this feature.
3075set shorten_title 3
3076
3077# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3078set tilde_in_titlebar false
3079
3080# How many directory-changes or console-commands should be kept in history?
3081set max_history_size 20
3082set max_console_history_size 50
3083
3084# Try to keep so much space between the top/bottom border when scrolling:
3085set scroll_offset 8
3086
3087# Flush the input after each key hit? (Noticable when ranger lags)
3088set flushinput true
3089
3090# Padding on the right when there's no preview?
3091# This allows you to click into the space to run the file.
3092set padding_right true
3093
3094# Save bookmarks (used with mX and `X) instantly?
3095# This helps to synchronize bookmarks between multiple ranger
3096# instances but leads to *slight* performance loss.
3097# When false, bookmarks are saved when ranger is exited.
3098set autosave_bookmarks true
3099
3100# You can display the "real" cumulative size of directories by using the
3101# command :get_cumulative_size or typing "dc". The size is expensive to
3102# calculate and will not be updated automatically. You can choose
3103# to update it automatically though by turning on this option:
3104set autoupdate_cumulative_size false
3105
3106# Turning this on makes sense for screen readers:
3107set show_cursor false
3108
3109# One of: size, basename, mtime, type
3110set sort natural
3111
3112# Additional sorting options
3113set sort_reverse false
3114set sort_case_insensitive true
3115set sort_directories_first true
3116
3117# Enable this if key combinations with the Alt Key don't work for you.
3118# (Especially on xterm)
3119set xterm_alt_key false
3120
3121# ===================================================================
3122# == Local Options
3123# ===================================================================
3124# You can set local options that only affect a single directory.
3125
3126# Examples:
3127# setlocal path=~/downloads sort mtime
3128
3129# ===================================================================
3130# == Command Aliases in the Console
3131# ===================================================================
3132
3133alias e edit
3134alias q quit
3135alias q! quitall
3136alias qall quitall
3137alias setl setlocal
3138
3139alias filter scout -prt
3140alias find scout -aet
3141alias mark scout -mr
3142alias unmark scout -Mr
3143alias search scout -rs
3144alias search_inc scout -rts
3145alias travel scout -aefiklst
3146
3147# ===================================================================
3148# == Define keys for the browser
3149# ===================================================================
3150
3151# Basic
3152map Q quit!
3153map q quit
3154copymap q ZZ ZQ
3155
3156map R reload_cwd
3157map <C-r> reset
3158map <C-l> redraw_window
3159map <C-c> abort
3160map <esc> change_mode normal
3161
3162map i display_file
3163map ? help
3164map W display_log
3165map w taskview_open
3166map S shell $SHELL
3167
3168map : console
3169map ; console
3170map ! console shell
3171map @ console -p6 shell %%s
3172map # console shell -p
3173map s console shell
3174map r chain draw_possible_programs; console open_with
3175map f console find
3176map cd console cd
3177
3178# Tagging / Marking
3179map t tag_toggle
3180map ut tag_remove
3181map "<any> tag_toggle tag=%any
3182map <Space> mark_files toggle=True
3183map v mark_files all=True toggle=True
3184map uv mark_files all=True val=False
3185map V toggle_visual_mode
3186map uV toggle_visual_mode reverse=True
3187
3188# For the nostalgics: Midnight Commander bindings
3189map <F1> help
3190map <F3> display_file
3191map <F4> edit
3192map <F5> copy
3193map <F6> cut
3194map <F7> console mkdir
3195map <F8> console delete
3196map <F10> exit
3197
3198# In case you work on a keyboard with dvorak layout
3199map <UP> move up=1
3200map <DOWN> move down=1
3201map <LEFT> move left=1
3202map <RIGHT> move right=1
3203map <HOME> move to=0
3204map <END> move to=-1
3205map <PAGEDOWN> move down=1 pages=True
3206map <PAGEUP> move up=1 pages=True
3207map <CR> move right=1
3208map <DELETE> console delete
3209map <INSERT> console touch
3210
3211# VIM-like
3212copymap <UP> k
3213copymap <DOWN> j
3214copymap <LEFT> h
3215copymap <RIGHT> l
3216copymap <HOME> gg
3217copymap <END> G
3218copymap <PAGEDOWN> <C-F>
3219copymap <PAGEUP> <C-B>
3220
3221map J move down=0.5 pages=True
3222map K move up=0.5 pages=True
3223copymap J <C-D>
3224copymap K <C-U>
3225
3226# Jumping around
3227map H history_go -1
3228map L history_go 1
3229map ] move_parent 1
3230map [ move_parent -1
3231map } traverse
3232
3233map gh cd ~
3234map ge cd /etc
3235map gu cd /usr
3236map gd cd /dev
3237map gl cd -r .
3238map gL cd -r %f
3239map go cd /opt
3240map gv cd /var
3241map gm cd /media
3242map gM cd /mnt
3243map gs cd /srv
3244map gr cd /
3245map gR eval fm.cd(ranger.RANGERDIR)
3246map g/ cd /
3247map g? cd /usr/share/doc/ranger
3248
3249# External Programs
3250map E edit
3251map du shell -p du --max-depth=1 -h --apparent-size
3252map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3253map yp shell -d echo -n %d/%f | xsel -i
3254map yd shell -d echo -n %d | xsel -i
3255map yn shell -d echo -n %f | xsel -i
3256
3257# Filesystem Operations
3258map = chmod
3259
3260map cw console rename
3261map A eval fm.open_console('rename ' + fm.thisfile.basename)
3262map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3263
3264map pp paste
3265map po paste overwrite=True
3266map pl paste_symlink relative=False
3267map pL paste_symlink relative=True
3268map phl paste_hardlink
3269map pht paste_hardlinked_subtree
3270
3271map dd cut
3272map ud uncut
3273map da cut mode=add
3274map dr cut mode=remove
3275
3276map yy copy
3277map uy uncut
3278map ya copy mode=add
3279map yr copy mode=remove
3280
3281# Temporary workarounds
3282map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3283map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3284map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3285map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3286map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3287map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3288map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3289map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3290
3291# Searching
3292map / console search
3293map n search_next
3294map N search_next forward=False
3295map ct search_next order=tag
3296map cs search_next order=size
3297map ci search_next order=mimetype
3298map cc search_next order=ctime
3299map cm search_next order=mtime
3300map ca search_next order=atime
3301
3302# Tabs
3303map <C-n> tab_new ~
3304map <C-w> tab_close
3305map <TAB> tab_move 1
3306map <S-TAB> tab_move -1
3307map <A-Right> tab_move 1
3308map <A-Left> tab_move -1
3309map gt tab_move 1
3310map gT tab_move -1
3311map gn tab_new ~
3312map gc tab_close
3313map uq tab_restore
3314map <a-1> tab_open 1
3315map <a-2> tab_open 2
3316map <a-3> tab_open 3
3317map <a-4> tab_open 4
3318map <a-5> tab_open 5
3319map <a-6> tab_open 6
3320map <a-7> tab_open 7
3321map <a-8> tab_open 8
3322map <a-9> tab_open 9
3323
3324# Sorting
3325map or toggle_option sort_reverse
3326map os chain set sort=size; set sort_reverse=False
3327map ob chain set sort=basename; set sort_reverse=False
3328map on chain set sort=natural; set sort_reverse=False
3329map om chain set sort=mtime; set sort_reverse=False
3330map oc chain set sort=ctime; set sort_reverse=False
3331map oa chain set sort=atime; set sort_reverse=False
3332map ot chain set sort=type; set sort_reverse=False
3333
3334map oS chain set sort=size; set sort_reverse=True
3335map oB chain set sort=basename; set sort_reverse=True
3336map oN chain set sort=natural; set sort_reverse=True
3337map oM chain set sort=mtime; set sort_reverse=True
3338map oC chain set sort=ctime; set sort_reverse=True
3339map oA chain set sort=atime; set sort_reverse=True
3340map oT chain set sort=type; set sort_reverse=True
3341
3342map dc get_cumulative_size
3343
3344# Settings
3345map zc toggle_option collapse_preview
3346map zd toggle_option sort_directories_first
3347map zh toggle_option show_hidden
3348map <C-h> toggle_option show_hidden
3349map zi toggle_option flushinput
3350map zm toggle_option mouse_enabled
3351map zp toggle_option preview_files
3352map zP toggle_option preview_directories
3353map zs toggle_option sort_case_insensitive
3354map zu toggle_option autoupdate_cumulative_size
3355map zv toggle_option use_preview_script
3356map zf console filter
3357
3358# Bookmarks
3359map `<any> enter_bookmark %any
3360map '<any> enter_bookmark %any
3361map m<any> set_bookmark %any
3362map um<any> unset_bookmark %any
3363
3364map m<bg> draw_bookmarks
3365copymap m<bg> um<bg> `<bg> '<bg>
3366
3367# Generate all the chmod bindings with some python help:
3368eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3369eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3370eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3371eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3372eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3373
3374eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3375eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3376eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3377eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3378eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3379
3380# ===================================================================
3381# == Define keys for the console
3382# ===================================================================
3383# Note: Unmapped keys are passed directly to the console.
3384
3385# Basic
3386cmap <tab> eval fm.ui.console.tab()
3387cmap <s-tab> eval fm.ui.console.tab(-1)
3388cmap <ESC> eval fm.ui.console.close()
3389cmap <CR> eval fm.ui.console.execute()
3390cmap <C-l> redraw_window
3391
3392copycmap <ESC> <C-c>
3393copycmap <CR> <C-j>
3394
3395# Move around
3396cmap <up> eval fm.ui.console.history_move(-1)
3397cmap <down> eval fm.ui.console.history_move(1)
3398cmap <left> eval fm.ui.console.move(left=1)
3399cmap <right> eval fm.ui.console.move(right=1)
3400cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3401cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3402
3403# Line Editing
3404cmap <backspace> eval fm.ui.console.delete(-1)
3405cmap <delete> eval fm.ui.console.delete(0)
3406cmap <C-w> eval fm.ui.console.delete_word()
3407cmap <C-k> eval fm.ui.console.delete_rest(1)
3408cmap <C-u> eval fm.ui.console.delete_rest(-1)
3409cmap <C-y> eval fm.ui.console.paste()
3410
3411# And of course the emacs way
3412copycmap <up> <C-p>
3413copycmap <down> <C-n>
3414copycmap <left> <C-b>
3415copycmap <right> <C-f>
3416copycmap <home> <C-a>
3417copycmap <end> <C-e>
3418copycmap <delete> <C-d>
3419copycmap <backspace> <C-h>
3420
3421# Note: There are multiple ways to express backspaces. <backspace> (code 263)
3422# and <backspace2> (code 127). To be sure, use both.
3423copycmap <backspace> <backspace2>
3424
3425# This special expression allows typing in numerals:
3426cmap <allow_quantifiers> false
3427
3428# ===================================================================
3429# == Pager Keybindings
3430# ===================================================================
3431
3432# Movement
3433pmap <down> pager_move down=1
3434pmap <up> pager_move up=1
3435pmap <left> pager_move left=4
3436pmap <right> pager_move right=4
3437pmap <home> pager_move to=0
3438pmap <end> pager_move to=-1
3439pmap <pagedown> pager_move down=1.0 pages=True
3440pmap <pageup> pager_move up=1.0 pages=True
3441pmap <C-d> pager_move down=0.5 pages=True
3442pmap <C-u> pager_move up=0.5 pages=True
3443
3444copypmap <UP> k <C-p>
3445copypmap <DOWN> j <C-n> <CR>
3446copypmap <LEFT> h
3447copypmap <RIGHT> l
3448copypmap <HOME> g
3449copypmap <END> G
3450copypmap <C-d> d
3451copypmap <C-u> u
3452copypmap <PAGEDOWN> n f <C-F> <Space>
3453copypmap <PAGEUP> p b <C-B>
3454
3455# Basic
3456pmap <ESC> pager_close
3457copypmap <ESC> q Q i <F3>
3458pmap E edit_file
3459
3460# ===================================================================
3461# == Taskview Keybindings
3462# ===================================================================
3463
3464# Movement
3465tmap <up> taskview_move up=1
3466tmap <down> taskview_move down=1
3467tmap <home> taskview_move to=0
3468tmap <end> taskview_move to=-1
3469tmap <pagedown> taskview_move down=1.0 pages=True
3470tmap <pageup> taskview_move up=1.0 pages=True
3471tmap <C-d> taskview_move down=0.5 pages=True
3472tmap <C-u> taskview_move up=0.5 pages=True
3473
3474copytmap <UP> k <C-p>
3475copytmap <DOWN> j <C-n> <CR>
3476copytmap <HOME> g
3477copytmap <END> G
3478copytmap <C-u> u
3479copytmap <PAGEDOWN> n f <C-F> <Space>
3480copytmap <PAGEUP> p b <C-B>
3481
3482# Changing priority and deleting tasks
3483tmap J eval -q fm.ui.taskview.task_move(-1)
3484tmap K eval -q fm.ui.taskview.task_move(0)
3485tmap dd eval -q fm.ui.taskview.task_remove()
3486tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3487tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3488tmap <delete> eval -q fm.ui.taskview.task_remove()
3489
3490# Basic
3491tmap <ESC> taskview_close
3492copytmap <ESC> q Q w <C-c>
3493#+end_src
3494
3495*** scope.sh
3496:PROPERTIES:
2e877d14 3497:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
1656853a
AB
3498:END:
3499
2e877d14 3500#+begin_src sh :tangle no
1656853a
AB
3501# ranger supports enhanced previews. If the option "use_preview_script"
3502# is set to True and this file exists, this script will be called and its
3503# output is displayed in ranger. ANSI color codes are supported.
3504
3505# NOTES: This script is considered a configuration file. If you upgrade
3506# ranger, it will be left untouched. (You must update it yourself.)
3507# Also, ranger disables STDIN here, so interactive scripts won't work properly
3508
3509# Meanings of exit codes:
3510# code | meaning | action of ranger
3511# -----+------------+-------------------------------------------
3512# 0 | success | success. display stdout as preview
3513# 1 | no preview | failure. display no preview at all
3514# 2 | plain text | display the plain content of the file
3515# 3 | fix width | success. Don't reload when width changes
3516# 4 | fix height | success. Don't reload when height changes
3517# 5 | fix both | success. Don't ever reload
3518
3519# Meaningful aliases for arguments:
3520path="$1" # Full path of the selected file
3521width="$2" # Width of the preview pane (number of fitting characters)
3522height="$3" # Height of the preview pane (number of fitting characters)
3523
3524maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3525
3526# Find out something about the file:
3527mimetype=$(file --mime-type -Lb "$path")
3528extension=${path##*.}
3529
3530# Functions:
3531# runs a command and saves its output into $output. Useful if you need
3532# the return value AND want to use the output in a pipe
3533try() { output=$(eval '"$@"'); }
3534
3535# writes the output of the previouosly used "try" command
3536dump() { echo "$output"; }
3537
3538# a common post-processing function used after most commands
3539trim() { head -n "$maxln"; }
3540
3541# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3542highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3543
3544case "$extension" in
3545 # Archive extensions:
3546 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3547 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3548 try als "$path" && { dump | trim; exit 0; }
3549 try acat "$path" && { dump | trim; exit 3; }
3550 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3551 exit 1;;
3552 rar)
3553 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3554 # PDF documents:
3555 pdf)
3556 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3557 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3558 # BitTorrent Files
3559 torrent)
3560 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3561 # HTML Pages:
3562 htm|html|xhtml)
3563 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3564 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3565 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3566 ;; # fall back to highlight/cat if the text browsers fail
3567esac
3568
3569case "$mimetype" in
3570 # Syntax highlight for text files:
3571 text/* | */xml)
3572 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3573 # Ascii-previews of images:
3574 image/*)
3575 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3576 # Display information about media files:
3577 video/* | audio/*)
3578 exiftool "$path" && exit 5
3579 # Use sed to remove spaces so the output fits into the narrow window
3580 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3581esac
3582
3583exit 1
3584#+end_src
3585
2f1dcf9d
AB
3586** redshift
3587:PROPERTIES:
e2149232 3588:header-args+: :tangle ~/.config/redshift.conf :comments none
2f1dcf9d
AB
3589:END:
3590
3591#+begin_src conf
3592; Global settings for redshift
3593[redshift]
3594; Set the day and night screen temperatures (Neutral is 6500K)
3595;temp-day=5700
3596;temp-night=3500
3597
3598;temp-day=6500
3599temp-day=6200
3600;temp-night=4800
3601;temp-night=5000
3602;temp-night=4500
3603temp-night=4000
3604
3605; Enable/Disable a smooth transition between day and night
3606; 0 will cause a direct change from day to night screen temperature.
3607; 1 will gradually increase or decrease the screen temperature.
3608transition=1
3609
3610; Set the screen brightness. Default is 1.0.
3611;brightness=0.9
3612; It is also possible to use different settings for day and night
3613; since version 1.8.
3614;brightness-day=0.7
3615;brightness-night=0.4
3616; Set the screen gamma (for all colors, or each color channel
3617; individually)
3618;gamma=0.8
3619;gamma=1.0
3620;gamma=0.8:0.7:0.8
3621; This can also be set individually for day and night since
3622; version 1.10.
3623;gamma-day=0.8:0.7:0.8
3624;gamma-night=0.6
3625
3626; Set the location-provider: 'geoclue2' or 'manual'
3627; type 'redshift -l list' to see possible values.
3628; The location provider settings are in a different section.
3629;location-provider=manual
3630location-provider=geoclue2
3631
3632; Set the adjustment-method: 'randr', 'vidmode'
3633; type 'redshift -m list' to see all possible values.
3634; 'randr' is the preferred method, 'vidmode' is an older API.
3635; but works in some cases when 'randr' does not.
3636; The adjustment method settings are in a different section.
3637adjustment-method=randr
3638
3639; Configuration of the location-provider:
3640; type 'redshift -l PROVIDER:help' to see the settings.
3641; ex: 'redshift -l manual:help'
3642; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3643; are negative numbers.
3644;[manual]
3645;lat=48.1
3646;lon=11.6
3647
3648; Configuration of the adjustment-method
3649; type 'redshift -m METHOD:help' to see the settings.
3650; ex: 'redshift -m randr:help'
3651; In this example, randr is configured to adjust screen 1.
3652; Note that the numbering starts from 0, so this is actually the
3653; second screen. If this option is not specified, Redshift will try
3654; to adjust _all_ screens.
3655;[randr]
3656;screen=1
3657#+end_src
3658
3659** rofi
3660:PROPERTIES:
3661:header-args+: :tangle ~/.config/rofi/config
3662:END:
3663
3664#+begin_src conf
3665rofi.font: Ubuntu Mono 13
3666! rofi.font: Inconsolata 16
3667! rofi.font: Iosevka 13
3668! rofi.font: Source Code Pro 11
3669rofi.modi: run,window
3670! rofi.width: 640
3671rofi.width: 600
3672!rofi.location: 2
3673!rofi.yoffset: 200
3674rofi.monitor: -1
3675!rofi.lines: 10
3676
3677!rofi.theme: /usr/share/rofi/themes//Arc.rasi
3678!rofi.theme: /usr/share/rofi/themes//Paper.rasi
3679!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3680
3681rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3682#+end_src
3683
3684** rofi-pass
3685:PROPERTIES:
3686:header-args+: :tangle ~/.config/rofi-pass/config
3687:END:
3688
3689#+begin_src conf
3690# permanently set alternative root dir
3691# root=/path/to/root
3692
3693# rofi command. Make sure to have "$@" as last argument
3694_rofi () {
3695 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
61f337f4 3696 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
2f1dcf9d
AB
3697}
3698
3699# xdotool needs the keyboard layout to be set using setxkbmap
3700# You can do this in your autostart scripts (e.g. xinitrc)
3701
3702# If for some reason, you cannot do this, you can set the command here.
3703# and set fix_layout to true
3704fix_layout=false
3705
3706layout_cmd () {
3707 setxkbmap us
3708}
3709
3710# fields to be used
3711URL_field='url'
3712USERNAME_field='user'
3713AUTOTYPE_field='autotype'
3714
3715# delay to be used for :delay keyword
3716delay=2
3717
3718## Programs to be used
3719# Editor
3720EDITOR='gvim -f'
3721
3722# Browser
3723BROWSER='chromium'
3724
3725## Misc settings
3726
3727default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3728auto_enter='false'
3729notify='false'
3730default_autotype='user :tab pass'
3731
3732# color of the help messages
3733# leave empty for autodetection
3734help_color="#4872FF"
3735
3736# Clipboard settings
3737# Possible options: primary, clipboard, both
3738clip=primary
3739
3740# Options for generating new password entries
3741# default_user is also used for password files that have no user field.
3742default_user=aminb
3743default_user2=aminban
3744password_length=30
3745
3746# Custom Keybindings
3747#autotype="Alt+1"
3748autotype="Alt+m"
3749type_user="Alt+2"
3750type_pass="Alt+3"
3751open_url="Alt+4"
3752copy_name="Alt+u"
3753copy_url="Alt+l"
3754copy_pass="Alt+p"
3755show="Alt+o"
3756copy_entry="Alt+2"
3757type_entry="Alt+1"
3758copy_menu="Alt+c"
3759action_menu="Alt+a"
3760type_menu="Alt+t"
3761help="Alt+h"
3762switch="Alt+x"
3763insert_pass="Alt+n"
3764#+end_src
3765
fb52d1f9
AB
3766** sway
3767:PROPERTIES:
3768:header-args+: :tangle ~/.config/sway/config
3769:END:
3770
3771#+begin_src conf
d6cb3a4a 3772exec xrdb .Xresources
1e3c1c15 3773exec dunst
fb52d1f9 3774### Variables
373851f8 3775# super
fb52d1f9 3776set $mod Mod4
373851f8
AB
3777# alt
3778set $mod2 Mod1
fb52d1f9
AB
3779set $left h
3780set $down j
3781set $up k
3782set $right l
fb52d1f9 3783set $term urxvt
d6cb3a4a 3784set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
fb52d1f9
AB
3785
3786### Output configuration
3787#
3788# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3789output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3790#
3791# Example configuration:
3792#
3793# output HDMI-A-1 resolution 1920x1080 position 1920,0
3794#
3795# You can get the names of your outputs by running: swaymsg -t get_outputs
3796
3797### Idle configuration
3798#
3799# Example configuration:
3800#
3801#exec swayidle \
3802# timeout 300 'swaylock -c 000000' \
3803# timeout 600 'swaymsg "output * dpms off"' \
3804# resume 'swaymsg "output * dpms on"' \
3805# before-sleep 'swaylock -c 000000'
3806#
3807# This will lock your screen after 300 seconds of inactivity, then turn off
3808# your displays after another 600 seconds, and turn your screens back on when
3809# resumed. It will also lock your screen before your computer goes to sleep.
3810
3811### Input configuration
0e0dc607
AB
3812
3813input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3814 dwt enabled
3815 tap enabled
3816 natural_scroll enabled
3817 middle_emulation enabled
fde01a87 3818 click_method clickfinger
0e0dc607
AB
3819}
3820
3821input "1:1:AT_Translated_Set_2_keyboard" {
3822 repeat_delay 200
3823 repeat_rate 45
fde01a87
AB
3824 xkb_layout us,ir
3825 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
0e0dc607
AB
3826}
3827
fb52d1f9
AB
3828
3829### Key bindings
3830#
3831# Basics:
3832#
3833 # start a terminal
3834 bindsym $mod+Return exec $term
3835
3836 # kill focused window
3837 bindsym $mod+Shift+q kill
3838
3839 # start your launcher
3840 bindsym $mod+d exec $menu
3841
40085087 3842 # password manager
71668c89 3843 bindsym $mod2+space exec rofi-pass
40085087 3844
fb52d1f9
AB
3845 # Drag floating windows by holding down $mod and left mouse button.
3846 # Resize them with right mouse button + $mod.
b41bfb27
AB
3847 # Despite the name, also works for non-floating windows.
3848 # Change normal to inverse to use left mouse button for resizing and right
3849 # mouse button for dragging.
3850 floating_modifier $mod normal
fb52d1f9
AB
3851
3852 # reload the configuration file
3853 bindsym $mod+Shift+c reload
3854
3855 # exit sway (logs you out of your wayland session)
3856 bindsym $mod+Shift+e exit
d6cb3a4a
AB
3857
3858 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3859 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3860 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3861
8e4862e2
AB
3862 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3863 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3864 bindsym XF86AudioMute exec pamixer --toggle-mute
3865 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3866
373851f8 3867 # original sway workspace switch and window move
1e3c1c15
AB
3868 bindsym $mod+bracketleft workspace prev
3869 bindsym $mod+bracketright workspace next
3870 bindsym $mod+braceleft move container to workspace prev
3871 bindsym $mod+braceright move container to workspace next
3872
3873 # bspwm-esque workspace switch and window move
3874 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3875 bindsym $mod2+bracketright exec sway-ws-util switch next
3876 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3877 bindsym $mod2+braceright exec sway-ws-util move next follow
fb52d1f9
AB
3878#
3879# Moving around:
3880#
3881 # Move your focus around
3882 bindsym $mod+$left focus left
3883 bindsym $mod+$down focus down
3884 bindsym $mod+$up focus up
3885 bindsym $mod+$right focus right
3886 # or use $mod+[up|down|left|right]
3887 bindsym $mod+Left focus left
3888 bindsym $mod+Down focus down
3889 bindsym $mod+Up focus up
3890 bindsym $mod+Right focus right
3891
3892 # _move_ the focused window with the same, but add Shift
3893 bindsym $mod+Shift+$left move left
3894 bindsym $mod+Shift+$down move down
3895 bindsym $mod+Shift+$up move up
3896 bindsym $mod+Shift+$right move right
3897 # ditto, with arrow keys
3898 bindsym $mod+Shift+Left move left
3899 bindsym $mod+Shift+Down move down
3900 bindsym $mod+Shift+Up move up
3901 bindsym $mod+Shift+Right move right
3902#
3903# Workspaces:
3904#
3905 # switch to workspace
3906 bindsym $mod+1 workspace 1
3907 bindsym $mod+2 workspace 2
3908 bindsym $mod+3 workspace 3
3909 bindsym $mod+4 workspace 4
3910 bindsym $mod+5 workspace 5
3911 bindsym $mod+6 workspace 6
3912 bindsym $mod+7 workspace 7
3913 bindsym $mod+8 workspace 8
3914 bindsym $mod+9 workspace 9
3915 bindsym $mod+0 workspace 10
3916 # move focused container to workspace
3917 bindsym $mod+Shift+1 move container to workspace 1
3918 bindsym $mod+Shift+2 move container to workspace 2
3919 bindsym $mod+Shift+3 move container to workspace 3
3920 bindsym $mod+Shift+4 move container to workspace 4
3921 bindsym $mod+Shift+5 move container to workspace 5
3922 bindsym $mod+Shift+6 move container to workspace 6
3923 bindsym $mod+Shift+7 move container to workspace 7
3924 bindsym $mod+Shift+8 move container to workspace 8
3925 bindsym $mod+Shift+9 move container to workspace 9
3926 bindsym $mod+Shift+0 move container to workspace 10
3927 # Note: workspaces can have any name you want, not just numbers.
3928 # We just use 1-10 as the default.
3929#
3930# Layout stuff:
3931#
3932 # You can "split" the current object of your focus with
3933 # $mod+b or $mod+v, for horizontal and vertical splits
3934 # respectively.
3935 bindsym $mod+b splith
3936 bindsym $mod+v splitv
3937
3938 # Switch the current container between different layout styles
3939 bindsym $mod+s layout stacking
3940 bindsym $mod+w layout tabbed
3941 bindsym $mod+e layout toggle split
3942
3943 # Make the current focus fullscreen
3944 bindsym $mod+f fullscreen
3945
3946 # Toggle the current focus between tiling and floating mode
3947 bindsym $mod+Shift+space floating toggle
3948
3949 # Swap focus between the tiling area and the floating area
3950 bindsym $mod+space focus mode_toggle
3951
3952 # move focus to the parent container
3953 bindsym $mod+a focus parent
3954#
3955# Scratchpad:
3956#
3957 # Sway has a "scratchpad", which is a bag of holding for windows.
3958 # You can send windows there and get them back later.
3959
3960 # Move the currently focused window to the scratchpad
3961 bindsym $mod+Shift+minus move scratchpad
3962
3963 # Show the next scratchpad window or hide the focused scratchpad window.
3964 # If there are multiple scratchpad windows, this command cycles through them.
3965 bindsym $mod+minus scratchpad show
3966#
3967# Resizing containers:
3968#
3969mode "resize" {
3970 # left will shrink the containers width
3971 # right will grow the containers width
3972 # up will shrink the containers height
3973 # down will grow the containers height
3974 bindsym $left resize shrink width 10px
3975 bindsym $down resize grow height 10px
3976 bindsym $up resize shrink height 10px
3977 bindsym $right resize grow width 10px
3978
3979 # ditto, with arrow keys
3980 bindsym Left resize shrink width 10px
3981 bindsym Down resize grow height 10px
3982 bindsym Up resize shrink height 10px
3983 bindsym Right resize grow width 10px
3984
3985 # return to default mode
3986 bindsym Return mode "default"
3987 bindsym Escape mode "default"
3988}
eb186a5a 3989bindsym $mod+Shift+r mode "resize"
fb52d1f9
AB
3990
3991#
3992# Status Bar:
3993#
3994# Read `man 5 sway-bar` for more information about this section.
3995bar {
d6cb3a4a 3996 position bottom
fb52d1f9
AB
3997 colors {
3998 statusline #ffffff
3999 background #323232
4000 inactive_workspace #32323200 #32323200 #5c5c5c
4001 }
6a056822 4002 status_command i3status
fb52d1f9
AB
4003}
4004
4005include /etc/sway/config.d/*
4006#+end_src
4007
08e87a0a
AB
4008** TLP
4009
4010*** TODO enigma
2a6e947b 4011*** pary
08e87a0a 4012
2a6e947b 4013#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "pary")) "/sudo::/etc/default/tlp")
08e87a0a
AB
4014# ------------------------------------------------------------------------------
4015# tlp - Parameters for power saving
4016# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4017
4018# Hint: some features are disabled by default, remove the leading # to enable
4019# them.
4020
4021# Set to 0 to disable, 1 to enable TLP.
4022TLP_ENABLE=1
4023
4024# Operation mode when no power supply can be detected: AC, BAT.
4025# Concerns some desktop and embedded hardware only.
4026TLP_DEFAULT_MODE=AC
4027
4028# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4029# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4030TLP_PERSISTENT_DEFAULT=0
4031
4032# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4033# Non-zero value enables, zero disables laptop mode.
4034DISK_IDLE_SECS_ON_AC=0
4035DISK_IDLE_SECS_ON_BAT=2
4036
4037# Dirty page values (timeouts in secs).
4038MAX_LOST_WORK_SECS_ON_AC=15
4039MAX_LOST_WORK_SECS_ON_BAT=60
4040
4041# Hint: CPU parameters below are disabled by default, remove the leading #
4042# to enable them, otherwise kernel default values are used.
4043
4044# Select a CPU frequency scaling governor.
4045# Intel Core i processor with intel_pstate driver:
4046# powersave(*), performance.
4047# Older hardware with acpi-cpufreq driver:
4048# ondemand(*), powersave, performance, conservative, schedutil.
4049# (*) is recommended.
4050# Hint: use tlp-stat -p to show the active driver and available governors.
4051# Important:
4052# powersave for intel_pstate and ondemand for acpi-cpufreq are power
4053# efficient for *almost all* workloads and therefore kernel and most
4054# distributions have chosen them as defaults. If you still want to change,
4055# you should know what you're doing! You *must* disable your distribution's
4056# governor settings or conflicts will occur.
4057#CPU_SCALING_GOVERNOR_ON_AC=powersave
4058#CPU_SCALING_GOVERNOR_ON_BAT=powersave
4059
4060# Set the min/max frequency available for the scaling governor.
4061# Possible values strongly depend on your CPU. For available frequencies see
4062# the output of tlp-stat -p.
4063#CPU_SCALING_MIN_FREQ_ON_AC=0
4064#CPU_SCALING_MAX_FREQ_ON_AC=0
4065#CPU_SCALING_MIN_FREQ_ON_BAT=0
4066#CPU_SCALING_MAX_FREQ_ON_BAT=0
4067
4068# Set energy performance hints (HWP) for Intel P-state governor:
4069# performance, balance_performance, default, balance_power, power
4070# Values are given in order of increasing power saving.
4071# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4072CPU_HWP_ON_AC=balance_performance
4073CPU_HWP_ON_BAT=balance_power
4074
4075# Set Intel P-state performance: 0..100 (%).
4076# Limit the max/min P-state to control the power dissipation of the CPU.
4077# Values are stated as a percentage of the available performance.
4078# Requires an Intel Core i processor with intel_pstate driver.
4079#CPU_MIN_PERF_ON_AC=0
4080#CPU_MAX_PERF_ON_AC=100
4081#CPU_MIN_PERF_ON_BAT=0
4082#CPU_MAX_PERF_ON_BAT=30
4083
4084# Set the CPU "turbo boost" feature: 0=disable, 1=allow
4085# Requires an Intel Core i processor.
4086# Important:
4087# - This may conflict with your distribution's governor settings
4088# - A value of 1 does *not* activate boosting, it just allows it
4089#CPU_BOOST_ON_AC=1
4090#CPU_BOOST_ON_BAT=0
4091
4092# Minimize number of used CPU cores/hyper-threads under light load conditions:
4093# 0=disable, 1=enable.
4094SCHED_POWERSAVE_ON_AC=0
4095SCHED_POWERSAVE_ON_BAT=1
4096
4097# Kernel NMI Watchdog:
4098# 0=disable (default, saves power), 1=enable (for kernel debugging only).
4099NMI_WATCHDOG=0
4100
4101# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4102# Frequency voltage pairs are written to:
4103# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4104# CAUTION: only use this, if you thoroughly understand what you are doing!
4105#PHC_CONTROLS="F:V F:V F:V F:V"
4106
4107# Set CPU performance versus energy savings policy:
4108# performance, balance-performance, default, balance-power, power.
4109# Values are given in order of increasing power saving.
4110# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4111ENERGY_PERF_POLICY_ON_AC=performance
4112ENERGY_PERF_POLICY_ON_BAT=balance-power
4113
4114# Disk devices; separate multiple devices with spaces (default: sda).
4115# Devices can be specified by disk ID also (lookup with: tlp diskid).
4116DISK_DEVICES="sda sdb"
4117
4118# Disk advanced power management level: 1..254, 255 (max saving, min, off).
4119# Levels 1..127 may spin down the disk; 255 allowable on most drives.
4120# Separate values for multiple disks with spaces. Use the special value 'keep'
4121# to keep the hardware default for the particular disk.
4122DISK_APM_LEVEL_ON_AC="254 254"
4123DISK_APM_LEVEL_ON_BAT="128 128"
4124
4125# Hard disk spin down timeout:
4126# 0: spin down disabled
4127# 1..240: timeouts from 5s to 20min (in units of 5s)
4128# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4129# See 'man hdparm' for details.
4130# Separate values for multiple disks with spaces. Use the special value 'keep'
4131# to keep the hardware default for the particular disk.
4132#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4133#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4134
4135# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4136# Separate values for multiple disks with spaces. Use the special value 'keep'
4137# to keep the kernel default scheduler for the particular disk.
4138#DISK_IOSCHED="cfq cfq"
4139
4140# AHCI link power management (ALPM) for disk devices:
4141# min_power, med_power_with_dipm(*), medium_power, max_performance.
4142# (*) Kernel >= 4.15 required, then recommended.
4143# Multiple values separated with spaces are tried sequentially until success.
4144SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4145SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4146
4147# Exclude host devices from AHCI link power management.
4148# Separate multiple hosts with spaces.
4149#SATA_LINKPWR_BLACKLIST="host1"
4150
4151# Runtime Power Management for AHCI host and disks devices:
4152# on=disable, auto=enable.
4153# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4154#AHCI_RUNTIME_PM_ON_AC=on
4155#AHCI_RUNTIME_PM_ON_BAT=on
4156
4157# Seconds of inactivity before disk is suspended.
4158AHCI_RUNTIME_PM_TIMEOUT=15
4159
4160# PCI Express Active State Power Management (PCIe ASPM):
4161# default, performance, powersave.
4162PCIE_ASPM_ON_AC=performance
4163PCIE_ASPM_ON_BAT=powersave
4164
4165# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4166# auto = mid on BAT, high on AC; default = use hardware defaults.
4167RADEON_POWER_PROFILE_ON_AC=high
4168RADEON_POWER_PROFILE_ON_BAT=low
4169
4170# Radeon dynamic power management method (DPM): battery, performance.
4171RADEON_DPM_STATE_ON_AC=performance
4172RADEON_DPM_STATE_ON_BAT=battery
4173
4174# Radeon DPM performance level: auto, low, high; auto is recommended.
4175RADEON_DPM_PERF_LEVEL_ON_AC=auto
4176RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4177
4178# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4179WIFI_PWR_ON_AC=off
4180WIFI_PWR_ON_BAT=on
4181
4182# Disable wake on LAN: Y/N.
4183WOL_DISABLE=Y
4184
4185# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4186# A value of 0 disables, >=1 enables power saving (recommended: 1).
4187SOUND_POWER_SAVE_ON_AC=0
4188SOUND_POWER_SAVE_ON_BAT=0
4189
4190# Disable controller too (HDA only): Y/N.
4191SOUND_POWER_SAVE_CONTROLLER=N
4192
4193# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4194# Drive can be powered on again by releasing (and reinserting) the eject lever
4195# or by pressing the disc eject button on newer models.
4196# Note: an UltraBay/MediaBay hard disk is never powered off.
4197BAY_POWEROFF_ON_AC=0
4198BAY_POWEROFF_ON_BAT=0
4199# Optical drive device to power off (default sr0).
4200BAY_DEVICE="sr0"
4201
4202# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4203RUNTIME_PM_ON_AC=on
4204RUNTIME_PM_ON_BAT=auto
4205
4206# Exclude PCI(e) device adresses the following list from Runtime PM
4207# (separate with spaces). Use lspci to get the adresses (1st column).
4208#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4209RUNTIME_PM_BLACKLIST="01:00.0"
4210
4211# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4212# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4213# prevents accidential power-on of dGPU in hybrid graphics setups.
4214# Use "" to disable the feature completely.
4215# Separate multiple drivers with spaces.
4216#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4217
4218# Set to 0 to disable, 1 to enable USB autosuspend feature.
4219USB_AUTOSUSPEND=1
4220
4221# Exclude listed devices from USB autosuspend (separate with spaces).
4222# Use lsusb to get the ids.
4223# Note: input devices (usbhid) are excluded automatically
4224#USB_BLACKLIST="1111:2222 3333:4444"
4225
4226# Bluetooth devices are excluded from USB autosuspend:
4227# 0=do not exclude, 1=exclude.
4228USB_BLACKLIST_BTUSB=0
4229
4230# Phone devices are excluded from USB autosuspend:
4231# 0=do not exclude, 1=exclude (enable charging).
4232USB_BLACKLIST_PHONE=0
4233
4234# Printers are excluded from USB autosuspend:
4235# 0=do not exclude, 1=exclude.
4236USB_BLACKLIST_PRINTER=1
4237
4238# WWAN devices are excluded from USB autosuspend:
4239# 0=do not exclude, 1=exclude.
4240USB_BLACKLIST_WWAN=1
4241
4242# Include listed devices into USB autosuspend even if already excluded
4243# by the blacklists above (separate with spaces).
4244# Use lsusb to get the ids.
4245#USB_WHITELIST="1111:2222 3333:4444"
4246
4247# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4248# (workaround for USB devices that cause shutdown problems).
4249#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4250
4251# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4252# on system startup: 0=disable, 1=enable.
4253# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4254# are ignored when this is enabled!
4255#RESTORE_DEVICE_STATE_ON_STARTUP=0
4256RESTORE_DEVICE_STATE_ON_STARTUP=1
4257
4258# Radio devices to disable on startup: bluetooth, wifi, wwan.
4259# Separate multiple devices with spaces.
4260#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4261
4262# Radio devices to enable on startup: bluetooth, wifi, wwan.
4263# Separate multiple devices with spaces.
4264#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4265
4266# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4267# (workaround for devices that are blocking shutdown).
4268#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4269
4270# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4271# (to prevent other operating systems from missing radios).
4272#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4273
4274# Radio devices to enable on AC: bluetooth, wifi, wwan.
4275#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4276
4277# Radio devices to disable on battery: bluetooth, wifi, wwan.
4278#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4279
4280# Radio devices to disable on battery when not in use (not connected):
4281# bluetooth, wifi, wwan.
4282#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4283
4284# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4285# required). Charging starts when the remaining capacity falls below the
4286# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4287# Main / Internal battery (values in %)
4288#START_CHARGE_THRESH_BAT0=75
4289#STOP_CHARGE_THRESH_BAT0=80
4290# Ultrabay / Slice / Replaceable battery (values in %)
4291#START_CHARGE_THRESH_BAT1=75
4292#STOP_CHARGE_THRESH_BAT1=80
4293
4294# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4295#RESTORE_THRESHOLDS_ON_BAT=1
4296
4297# ------------------------------------------------------------------------------
4298# tlp-rdw - Parameters for the radio device wizard
4299# Possible devices: bluetooth, wifi, wwan.
4300
4301# Hints:
4302# - Parameters are disabled by default, remove the leading # to enable them
4303# - Separate multiple radio devices with spaces
4304
4305# Radio devices to disable on connect.
4306#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4307#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4308#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4309
4310# Radio devices to enable on disconnect.
4311#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4312#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4313#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4314
4315# Radio devices to enable/disable when docked.
4316#DEVICES_TO_ENABLE_ON_DOCK=""
4317#DEVICES_TO_DISABLE_ON_DOCK=""
4318
4319# Radio devices to enable/disable when undocked.
4320#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4321#DEVICES_TO_DISABLE_ON_UNDOCK=""
4322#+end_src
4323
2e877d14
AB
4324** X
4325
4326*** xprofile
4327:PROPERTIES:
4328:header-args+: :tangle ~/.xprofile
4329:END:
4330
4331=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4332contrary, it's automatically sourced by LightDM, my display manager of
4333choice.
4334
fb52d1f9 4335#+begin_src sh :tangle no
6bab6a4a 4336xset -b # disable bell
b5208764 4337xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
6bab6a4a 4338
2e877d14
AB
4339# setxkbmap -option compose:ralt
4340
4341setxkbmap -option ctrl:nocaps # turn capslock into control
4342setxkbmap -option altwin:swap_alt_win # swap alt and super
4343
4344if [ $(hostname) = "plasma" ]
4345then
4346 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4347fi
4348
4349if [ $(hostname) = "enigma" ]
4350then
4351 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4352fi
4353
4354light -Scrs "intel_backlight" 2
4355
4356source $HOME/.zprofile
4357
4358export _JAVA_AWT_WM_NONREPARENTING=1
4359export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4360
2e877d14
AB
4361if [ $(hostname) = "plasma" ]
4362then
c0132386 4363 unlock-def-gk.py &
2e877d14 4364fi
c0132386
AB
4365
4366bspwm &
2e877d14
AB
4367#+end_src
4368
4369*** X resources
4370
4371**** Xresources
4372:PROPERTIES:
4373:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4374:END:
4375
4376#+begin_src conf-xdefaults
4377#include ".Xresources.d/fonts"
4378! #include ".Xresources.d/colors"
4379#include ".Xresources.d/emacs"
4380#include ".Xresources.d/rxvt-unicode"
4381#+end_src
4382
4383**** Xresources.d
4384
4385***** fonts
4386:PROPERTIES:
4387:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4388:END:
4389
4390#+begin_src conf-xdefaults
4391Xft.lcdfilter: lcddefault
4392Xft.antialias: true
4393Xft.autohint: 0
4394Xft.hinting: true
4395Xft.hintstyle: hintslight
4396! Xft.hintstyle: hintfull
4397Xft.rgba: rgb
4398Xft.dpi: 96
4399#+end_src
4400
4401***** colors
4402:PROPERTIES:
4403:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4404:END:
4405
4406#+begin_src conf-xdefaults :tangle no
4407#include "gruvbox-light.xresources"
4408! #include "gruvbox-dark.xresources"
4409#include "gruvbox-urxvt256.xresources"
4410#+end_src
4411
4412#+begin_src conf-xdefaults :tangle no
4413! -----------------------------------------------------------------------------
4414! File: gruvbox-light.xresources
4415! Description: Retro groove colorscheme generalized
4416! Author: morhetz <morhetz@gmail.com>
4417! Source: https://github.com/morhetz/gruvbox-generalized
4418! Last Modified: 6 Sep 2014
4419! -----------------------------------------------------------------------------
4420
4421! hard contrast: *background: #f9f5d7
4422*background: #fbf1c7
4423! soft contrast: *background: #f2e5bc
4424*foreground: #3c3836
4425! Black + DarkGrey
4426*color0: #fdf4c1
4427*color8: #928374
4428! DarkRed + Red
4429*color1: #cc241d
4430*color9: #9d0006
4431! DarkGreen + Green
4432*color2: #98971a
4433*color10: #79740e
4434! DarkYellow + Yellow
4435*color3: #d79921
4436*color11: #b57614
4437! DarkBlue + Blue
4438*color4: #458588
4439*color12: #076678
4440! DarkMagenta + Magenta
4441*color5: #b16286
4442*color13: #8f3f71
4443! DarkCyan + Cyan
4444*color6: #689d6a
4445*color14: #427b58
4446! LightGrey + White
4447*color7: #7c6f64
4448*color15: #3c3836
4449#+end_src
4450
4451#+begin_src conf-xdefaults :tangle no
4452! -----------------------------------------------------------------------------
4453! File: gruvbox-dark.xresources
4454! Description: Retro groove colorscheme generalized
4455! Author: morhetz <morhetz@gmail.com>
4456! Source: https://github.com/morhetz/gruvbox-generalized
4457! Last Modified: 6 Sep 2014
4458! -----------------------------------------------------------------------------
4459
4460! hard contrast: *background: #1d2021
4461*background: #282828
4462! soft contrast: *background: #32302f
4463*foreground: #ebdbb2
4464! Black + DarkGrey
4465*color0: #282828
4466*color8: #928374
4467! DarkRed + Red
4468*color1: #cc241d
4469*color9: #fb4934
4470! DarkGreen + Green
4471*color2: #98971a
4472*color10: #b8bb26
4473! DarkYellow + Yellow
4474*color3: #d79921
4475*color11: #fabd2f
4476! DarkBlue + Blue
4477*color4: #458588
4478*color12: #83a598
4479! DarkMagenta + Magenta
4480*color5: #b16286
4481*color13: #d3869b
4482! DarkCyan + Cyan
4483*color6: #689d6a
4484*color14: #8ec07c
4485! LightGrey + White
4486*color7: #a89984
4487*color15: #ebdbb2
4488#+end_src
4489
4490#+begin_src conf-xdefaults :tangle no
4491! -----------------------------------------------------------------------------
4492! File: gruvbox-urxvt256.xresources
4493! Description: Retro groove colorscheme generalized
4494! Author: morhetz <morhetz@gmail.com>
4495! Source: https://github.com/morhetz/gruvbox-generalized
4496! Last Modified: 13 Dec 2013
4497! -----------------------------------------------------------------------------
4498
4499URxvt.color24: #076678
4500URxvt.color66: #427b58
4501URxvt.color88: #9d0006
4502URxvt.color96: #8f3f71
4503URxvt.color100: #79740e
4504URxvt.color108: #8ec07c
4505URxvt.color109: #83a598
4506URxvt.color130: #af3a03
4507URxvt.color136: #b57614
4508URxvt.color142: #b8bb26
4509URxvt.color167: #fb4934
4510URxvt.color175: #d3869b
4511URxvt.color208: #fe8019
4512URxvt.color214: #fabd2f
4513URxvt.color223: #ebdbb2
4514URxvt.color228: #f2e5bc
4515URxvt.color229: #fbf1c7
4516URxvt.color230: #f9f5d7
4517URxvt.color234: #1d2021
4518URxvt.color235: #282828
4519URxvt.color236: #32302f
4520URxvt.color237: #3c3836
4521URxvt.color239: #504945
4522URxvt.color241: #665c54
4523URxvt.color243: #7c6f64
4524URxvt.color244: #928374
4525URxvt.color245: #928374
4526URxvt.color246: #a89984
4527URxvt.color248: #bdae93
4528URxvt.color250: #d5c4a1
4529#+end_src
4530
4531***** emacs
4532:PROPERTIES:
4533:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4534:END:
4535
4536#+begin_src conf-xdefaults
4537Emacs.menuBar: off
4538Emacs.toolBar: off
4539Emacs.verticalScrollBars: off
4540Emacs.cursorBlink: off
4541Emacs.FontBackend: xft,x
4542! Emacs.font: Ubuntu Mono-12
4543! Emacs.font: Triplicate T4C-11
4544! Emacs.font: Ubuntu Mono-10.5
4545! Emacs.font: Ubuntu Mono-12
4546! Emacs.font: Iosevka-11
4547
4548! Emacs.font: Fira Mono:size=15
4549! Emacs.font: DejaVu Sans Mono:size=15
4550! Emacs.font: Inconsolata:size=17
4551! Emacs.font: Inconsolata:size=16
4552! Emacs.font: Inconsolata LGC:size=14
4553! Emacs.font: Source Code Pro Medium-10.5
4554Emacs.font: Ubuntu Mono:size=16
4555! Emacs.font: Iosevka:size=16
4556#+end_src
4557
4558***** rxvt-unicode
4559:PROPERTIES:
4560:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4561:END:
4562
4563#+begin_src conf-xdefaults
4564! Font
4565URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4566URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4567URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4568URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4569
4570URxvt.xftAntialias: true
4571URxvt.letterSpace: 0
4572
4573URxvt.depth: 0
4574URxvt.loginShell: true
4575URxvt.saveLines: 100000
4576URxvt.internalBorder: 3
4577URxvt.lineSpace: 0
4578URxvt.scrollBar: false
4579URxvt.scrollStyle: rxvt
4580URxvt*scrollTtyOutput: false
4581URxvt*scrollWithBuffer: true
4582URxvt*scrollTtyKeypress: true
4583URxvt.keysym.Shift-Up: command:\033]720;1\007
4584URxvt.keysym.Shift-Down: command:\033]721;1\007
4585
4586URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4587URxvt.perl-ext: bidi
4588URxvt.bidi.enabled: 1
4589URxvt.url-select.launcher: firefox
4590URxvt.url-select.underline: true
4591URxvt.keysym.M-u: perl:url-select:select_next
4592URxvt.keysym.M-Escape: perl:keyboard-select:activate
4593URxvt.keysym.M-s: perl:keyboard-select:search
4594URxvt.url-launcher: /usr/bin/firefox
4595URxvt.matcher.button: 1
4596URxvt.iso14755: false
4597URxvt.iso14755_53: false
4598URxvt.keysym.M-c: perl:clipboard:copy
4599URxvt.keysym.M-v: perl:clipboard:paste
4600URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4601URxvt.keysym.C-Up: font-size:increase
4602URxvt.keysym.C-Down: font-size:decrease
4603URxvt.keysym.C-S-Up: font-size:incglobal
4604URxvt.keysym.C-S-Down: font-size:decglobal
4605URxvt.keysym.C-equal: font-size:reset
4606!URxvt.keysym.C-question: font-size:show
4607
4608URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4609
4610!urxvt*foreground: white
4611!urxvt*background: black
4612
4613!*color0: #2E3436
4614!*color1: #a40000
4615!*color2: #4E9A06
4616!*color3: #C4A000
4617!*color4: #3465A4
4618!*color5: #75507B
4619!*color6: #ce5c00
4620!*color7: #babdb9
4621!*color8: #555753
4622!*color9: #EF2929
4623!*color10: #8AE234
4624!*color11: #FCE94F
4625!*color12: #729FCF
4626!*color13: #AD7FA8
4627!*color14: #fcaf3e
4628!*color15: #EEEEEC
4629
4630!URxvt.foreground: #C8C8C8
4631!URxvt.background: #FFFFFF
4632
4633!! black
4634!*color0: #2E3436
4635!*color8: #555753
4636!! red
4637!*color1: #a40000
4638!*color9: #EF2929
4639!! green
4640!*color2: #4E9A06
4641!*color10: #8AE234
4642!! yellow
4643!*color3: #C4A000
4644!*color11: #FCE94F
4645!! blue
4646!*color4: #3465A4
4647!*color12: #729FCF
4648!! purple
4649!*color5: #75507B
4650!*color13: #AD7FA8
4651!! orange (replaces cyan)
4652!*color6: #ce5c00
4653!*color14: #fcaf3e
4654!! white
4655!*color7: #babdb9
4656!*color15: #EEEEEC
4657
4658! Tango colour theme for rxvt-unicode
4659URxvt.background: #FFFFFF
4660URxvt.foreground: #000000
4661
4662! Black
4663URxvt.color0: #2E3436
4664URxvt.color8: #757773
4665
4666! Red
4667URxvt.color1: #CC0000
4668URxvt.color9: #EF2929
4669
4670! Green
4671URxvt.color2: #4E9A06
4672URxvt.color10: #8AE234
4673
4674! Yellow
4675URxvt.color3: #C4A000
4676URxvt.color11: #FCE94F
4677
4678! Blue
4679URxvt.color4: #3465A4
4680URxvt.color12: #729FCF
4681
4682! Magenta
4683URxvt.color5: #75507B
4684URxvt.color13: #AD7FA8
4685
4686!! Cyan
4687!URxvt.color6: #06989A
4688!URxvt.color14: #34E2E2
4689! orange (replaces cyan)
4690*color6: #ce5c00
4691*color14: #fcaf3e
4692
4693! White
4694URxvt.color7: #D3D7CF
4695URxvt.color15: #EEEEEC
4696#+end_src
4697
69a6fe26
AB
4698** XDG
4699:PROPERTIES:
4700:header-args+: :tangle ~/.config/user-dirs.dirs
4701:END:
4702
4703#+begin_src conf
4704XDG_DESKTOP_DIR="$HOME/Desktop"
4705XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4706XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4707XDG_MUSIC_DIR="$HOME/usr/music"
4708XDG_PICTURES_DIR="$HOME/usr/pics"
4709XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4710XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4711XDG_VIDEOS_DIR="$HOME/usr/vids"
4712#+end_src
4713
4714** Zathura
4715:PROPERTIES:
4716:header-args+: :tangle ~/.config/zathura/zathurarc
4717:END:
4718
4719#+begin_src conf
4720set smooth-scroll true
4721set selection-clipboard clipboard
4722set zoom-step 05
4723set default-bg "#272727"
4724set statusbar-bg "#272727"
4725set inputbar-bg "#373737"
4726#+end_src
4727
b1f6f894
AB
4728** Zsh
4729
4730My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4731[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4732installed.
4733
4734*** zimrc
4735:PROPERTIES:
4736:header-args+: :tangle ~/.zimrc
4737:END:
4738
4739#+begin_src sh
4740
4741
4742#################
4743# CORE SETTINGS #
4744#################
4745
4746#
4747# Zim settings
4748#
4749
4750# Select what modules you would like enabled.
4751# The second line of modules may depend on options set by modules in the first
4752# line. These dependencies are noted on the respective module's README.md.
4753zmodules=(directory environment git git-info history input ssh utility custom \
4754 syntax-highlighting history-substring-search prompt completion)
4755
4756
4757###################
4758# MODULE SETTINGS #
4759###################
4760
4761#
4762# Prompt
4763#
4764
4765# Set your desired prompt here
4766zprompt_theme='pure'
4767#PURE_PROMPT_SYMBOL=λ
4768#PURE_PROMPT_SYMBOL=δ
4769PURE_PROMPT_SYMBOL=➜
4770
4771#
4772# Completion
4773#
4774
4775# set an optional host-specific filename for the completion cache file
4776# if none is provided, the default '.zcompdump' is used.
4777#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4778
4779#
4780# Utility
4781#
4782
4783# Uncomment to enable command correction prompts
4784# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4785setopt CORRECT
4786
4787#
4788# Environment
4789#
4790
4791# Set the string below to the desired terminal title format string.
4792# The terminal title is redrawn upon directory change, however, variables like
4793# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4794# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4795# The example below uses the following format: 'username@host:/current/directory'
4796ztermtitle='%n@%m:%~'
4797
4798#
4799# Input
4800#
4801
4802# Uncomment to enable double-dot expansion.
4803# This appends '../' to your input for each '.' you type after an initial '..'
4804#zdouble_dot_expand='true'
4805
4806#
4807# Syntax-Highlighting
4808#
4809
4810# This determines what highlighters will be used with the syntax-highlighting module.
4811# Documentation of the highlighters can be found here:
4812# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4813# For (u)rxvt, termite and gnome-terminal users,
4814# removing the 'cursor' highlighter will fix the disappearing cursor problem
4815#zhighlighters=(main brackets cursor)
4816zhighlighters=(main brackets pattern)
4817
4818
4819#
4820# SSH
4821#
4822
4823# Load these ssh identities with the ssh module
835adbdb 4824zssh_ids=(id_ed25519_amin)
b1f6f894
AB
4825
4826
4827#
4828# Pacman
4829#
4830
4831# Set (optional) pacman front-end.
4832zpacman_frontend='yay'
4833
4834# Load any helper scripts as defined here
4835#zpacman_helper=(aur)
4836#+end_src
4837
4838*** zlogin
4839:PROPERTIES:
4840:header-args+: :tangle ~/.zlogin
4841:END:
4842
4843#+begin_src sh
4844
4845
4846#
4847# User configuration sourced by login shells
4848#
4849
4850# Initialize zim
4851[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4852#+end_src
4853
4854*** zprofile
4855:PROPERTIES:
4856:header-args+: :tangle ~/.zprofile
4857:END:
4858
4859#+begin_src sh
4860#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4861#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
50fff474 4862export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
b1f6f894
AB
4863export XDG_CONFIG_HOME=$HOME/.config
4864export XDG_DATA_HOME=$HOME/.local/share
4865export XDG_DATA_DIRS=/usr/local/share:/usr/share
4866export MAILDIR="$HOME/mail"
4867export CVS_RSH=ssh
4868#export MATHMODELS=$HOME/src/eiffel/mathmodels
4869#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4870#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4871
4872# Eiffel2Java stuff
4873#export JAVA_HOME=/usr/lib/jvm/default
4874#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4875#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4876#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4877
4878#export PATH="$HOME/usr/build/pvs:$PATH"
4879#export SBCLISP_HOME=/usr/share/sbcl-source
4880#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4881
4882export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4883
4884#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4885#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4886
88bb4858 4887if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
b1f6f894
AB
4888#+end_src
4889
4890*** zshenv
4891:PROPERTIES:
4892:header-args+: :tangle ~/.zshenv
4893:END:
4894
4895#+begin_src sh
4896# Ensure that a non-login, non-interactive shell has a defined environment.
4897if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4898 source "${ZDOTDIR:-$HOME}/.zprofile"
4899fi
4900#+end_src
4901
4902*** zshrc
4903:PROPERTIES:
4904:header-args+: :tangle ~/.zshrc
4905:END:
4906
4907#+begin_src sh
4908# Bash-like navigation
4909#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4910#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4911export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4912#ZLE_SPACE_SUFFIX_CHARS=$'|&'
4913
4914#disable -r time # disable shell reserved word
4915#alias time='time -p' # -p for POSIX output
4916
4917# rehash if last command was pacaur or pacman
4918# (so that zsh picks up changes in $PATH immediately)
4919TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4920
4921#
4922# User configuration sourced by interactive shells
4923#
4924
4925# Change default zim location
4926export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4927
4928# Start zim
4929[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4930
4931ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4932#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4933
4934setopt globdots
4935
4936source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
2a6e947b 4937# source ~/.zsh/zsh-autopair/autopair.zsh
b1f6f894
AB
4938
4939
4940### fzf ###
4941
4942source /usr/share/fzf/key-bindings.zsh
4943source /usr/share/fzf/completion.zsh
4944
4945# Accept history selection instead of putting it on
4946# the command line
4947fzf-history-widget-accept() {
4948 fzf-history-widget
4949 zle accept-line
4950}
4951#zle -N fzf-history-widget-accept
4952#bindkey '^R' fzf-history-widget-accept
4953
4954# alt+c preview
4955export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4956
4957### fzf ###
4958
4959
4960# aliases
4961alias mpv="mpv --ytdl-format mp4"
4962alias mv="mv -iv"
4963alias cp="cp -iv"
4964alias scl=systemctl
4965alias jcl=journalctl
4966alias m="mbsync -Va; getmail; notmuch new"
4967alias best="youtube-dl -f best"
2a1be6b4 4968alias nixx="ssh amin@nix.aminb.org"
373a060a 4969alias fence="ssh aminb@fencepost.gnu.org"
b1f6f894
AB
4970
4971aur() {
4972 cd ~/usr/build
4973 git clone https://aur.archlinux.org/${1}.git
4974 cd ${1}
4975}
4976
4977# i-beam cursor
4978echo -e "\033[5 q"
4979#echo -e "\033[6 q"
4980#+end_src
4981
b13e2dc1
AB
4982* Scripts
4983
4984This section contains various useful scripts and the ones used by the
4985programs above. For instance, =toggle-tablet= for switching to and
4986from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4987Xfce's presentation mode which keeps the screen awake, and
4988=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4989exact brightness value.
4990
683f2865
AB
4991** battery-percentage-time
4992:PROPERTIES:
7564bd4d 4993:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
683f2865
AB
4994:END:
4995
6a056822 4996#+begin_src sh :tangle no
7564bd4d
AB
4997dbus_send() {
4998 label=$1
4999 dbus-send --print-reply=literal --system \
5000 --dest=org.freedesktop.UPower \
5001 /org/freedesktop/UPower/devices/battery_BAT0 \
5002 org.freedesktop.DBus.Properties.Get \
5003 string:org.freedesktop.UPower.Device \
5004 string:"${label}" | awk '{print $3}'
5005}
5006
5007perc=$(dbus_send 'Percentage')
5008state=$(dbus_send 'State')
be33ab1f
AB
5009
5010if [ "$state" -eq 2 ]; then # Discharging
7564bd4d 5011 secs=$(dbus_send 'TimeToEmpty')
be33ab1f 5012elif [ "$state" -eq 1 ]; then # Charging
7564bd4d 5013 secs=$(dbus_send 'TimeToFull')
be33ab1f 5014fi
7564bd4d 5015
ce79d14b 5016printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
683f2865
AB
5017#+end_src
5018
b13e2dc1
AB
5019** rofi-light
5020:PROPERTIES:
5021:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5022:END:
5023
33c5a5cd 5024#+begin_src bash
b13e2dc1 5025cur=$(light -G)
c2ce9b12 5026val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
b13e2dc1
AB
5027light -S $val
5028#+end_src
5029
ec002050
AB
5030** s (run sway)
5031:PROPERTIES:
5032:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5033:END:
5034
5035#+begin_src bash
ec002050
AB
5036export _JAVA_AWT_WM_NONREPARENTING=1
5037export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5038light -Scrs "intel_backlight" 2
5039source $HOME/.zprofile
5040sway
5041#+end_src
5042
bfe0aa23
AB
5043** sway-ws-util
5044:PROPERTIES:
5045:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5046:END:
5047
5048#+begin_src bash
5049curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
e549b7c8
AB
5050[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5051[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
bfe0aa23
AB
5052dest_ws=-1
5053op=-1
5054
5055if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5056 op="$1"
5057 if [ "$2" = "prev" ]; then
5058 dest_ws="$prev_ws"
5059 elif [ "$2" = "next" ]; then
5060 dest_ws="$next_ws"
5061 else
c60842dd 5062 echo "Usage: $0 $1 {prev|next} [follow]"
bfe0aa23
AB
5063 exit 1
5064 fi
5065else
5066 echo "Usage: $0 {switch|move} {prev|next} [follow]"
5067 exit 1
5068fi
5069
5070if [ "$op" = "switch" ]; then
5071 sway workspace "$dest_ws"
5072elif [ "$op" = "move" ]; then
5073 sway move container to workspace "$dest_ws"
5074 if [ "$3" = "follow" ]; then
5075 sway workspace "$dest_ws"
5076 fi
5077fi
5078#+end_src
5079
b13e2dc1
AB
5080** toggle-layout
5081:PROPERTIES:
5082:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5083:END:
5084
e388ae6f 5085#+begin_src bash :tangle no
b13e2dc1
AB
5086lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5087
5088if [ "$lang" = "us" ]; then
5089 setxkbmap ir
5090else
5091 setxkbmap us
5092 # xmodmap $HOME/.Xmodmap
5093fi
5094#+end_src
5095
5096** toggle-presentation-mode
5097:PROPERTIES:
5098:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5099:END:
5100
e388ae6f 5101#+begin_src bash :tangle no
b13e2dc1
AB
5102xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5103#+end_src
33c5a5cd 5104
72f329ba
AB
5105** toggle-tablet
5106:PROPERTIES:
5107:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5108:END:
5109
5110This script toggles between a 'normal' mode and a 'tablet' mode, doing
5111a few things:
5112
5113- rotates the screen using =xrandr=, so that rotating the physical
5114 display of my X220t would have the laptop's battery on the right
5115 hand side,
5116- enables touch screen,
5117- properly rotates the stylus pen and touch screen pointers, and
5118- toggles between RGB and Vertical BGR sub-pixel order.
5119
e388ae6f 5120#+begin_src bash :tangle no
72f329ba
AB
5121case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5122 0) # Screen is not rotated, we should rotate it right (90°)
5123 xrandr -o 3
5124 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5125 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5126 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5127 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5128 ;;
5129 1) # Currently top is rotated right, we should set it normal (0°)
5130 xrandr -o 0
5131 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5132 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5133 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5134 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5135 ;;
5136 *)
5137 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5138 exit 1
5139 ;;
5140esac
5141#+end_src
5142
2e877d14
AB
5143** unlock-def-gk.py
5144:PROPERTIES:
5145:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5146:END:
5147
e388ae6f 5148#+begin_src python :tangle no
2e877d14
AB
5149import gnomekeyring as gk
5150# list_item_ids_sync('login')[0] == 1L
5151gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5152#+end_src
5153
4fc8d5d2
AB
5154** volume-info
5155:PROPERTIES:
5156:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5157:END:
5158
6a056822 5159#+begin_src sh :tangle no
4fc8d5d2
AB
5160cur_vol=$(pamixer --get-volume)
5161
5162if [ $(pamixer --get-mute) = true ]; then
5163 printf 'mt \n' "$cur_vol"
5164else
5165 printf '%02d \n' "$cur_vol"
5166fi
5167#+end_src
5168
4f183f2a
AB
5169** wp
5170
5171My little wallpaper changer script.
5172
5173*** wp
5174:PROPERTIES:
5175:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5176:END:
5177
5178#+begin_src bash :tangle no
5179export DISPLAY=:0
5180
5181case "$1" in
5182 "day")
5183 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5184 ;;
5185 "night")
5186 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5187 ;;
5188 *)
5189 echo $"Usage: $0 {day|night}"
5190 exit 1
5191esac
5192#+end_src
5193
5194*** wp-auto
5195:PROPERTIES:
5196:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5197:END:
5198
5199#+begin_src bash :tangle no
5200SED=$(which sed)
5201ROFI=$(which rofi)
5202
5203export DISPLAY=:0
5204HOUR=$(date +%H)
5205
5206if [ -z "${SED}" ]
5207then
5208 echo "Did not find 'sed', script cannot continue."
5209 exit 1
5210fi
5211if [ -z "${ROFI}" ]
5212then
5213 echo "Did not find rofi, there is no point to continue."
5214 exit 1
5215fi
5216
5217###
5218# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5219# Repeated calls should leave the config clean-ish
5220###
5221function set_theme()
5222{
5223 CDIR="${HOME}/.config/rofi/"
5224 if [ ! -d "${CDIR}" ]
5225 then
5226 mkdir -p ${CDIR}
5227 fi
5228 if [ -f "${CDIR}/config" ]
5229 then
5230 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5231 fi
5232 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5233
5234}
5235
5236if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5237 then
5238 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5239 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5240 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5241 else
5242 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5243 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5244 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5245fi
5246#+end_src
5247
5248*** wp.service
5249:PROPERTIES:
5250:header-args+: :tangle ~/.config/systemd/user/wp.service
5251:END:
5252
5253#+begin_src conf :tangle no
5254[Unit]
5255Description=wallpaper service
5256
5257[Service]
5258Type=oneshot
5259ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5260#+end_src
5261
5262*** wp.timer
5263:PROPERTIES:
5264:header-args+: :tangle ~/.config/systemd/user/wp.timer
5265:END:
5266
5267#+begin_src conf :tangle no
5268[Unit]
5269[Unit]
5270Description=wallpaper timer
5271
5272[Timer]
5273OnCalendar=07,21:00
5274Unit=wp.service
5275Persistent=true
5276
5277[Install]
5278WantedBy=timers.target
5279#+end_src
5280
69a6fe26
AB
5281** zathura-sync.sh
5282:PROPERTIES:
5283:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5284:END:
5285
5286#+begin_src sh
5287pos="$1"
5288pdffile="$2"
5289zathura --synctex-forward "$pos" "$pdffile" || \
5290 (
5291 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5292 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5293#+end_src
33c5a5cd
AB
5294** Fun :)
5295
5296*** eat-em
5297:PROPERTIES:
5298:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5299:END:
5300
5301#+begin_src sh
5302# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5303# [ESC] character in original post removed here.
5304
5305# ANSI Color -- use these variables to easily have different color
5306# and format output. Make sure to output the reset sequence after
5307# colors (f = foreground, b = background), and use the 'off'
5308# feature for anything you turn on.
5309
5310initializeANSI()
5311{
5312 esc="$(echo -en '\e')"
5313
5314 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5315 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5316 cyanf="${esc}[36m"; whitef="${esc}[37m"
5317
5318 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5319 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5320 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5321
5322 boldon="${esc}[1m"; boldoff="${esc}[22m"
5323 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5324 ulon="${esc}[4m"; uloff="${esc}[24m"
5325 invon="${esc}[7m"; invoff="${esc}[27m"
5326
5327 reset="${esc}[0m"
5328}
5329
5330# note in this first use that switching colors doesn't require a reset
5331# first - the new color overrides the old one.
5332
5333#clear
5334
5335initializeANSI
5336
5337cat << EOF
5338
5339 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5340 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5341 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5342 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5343 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5344 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5345
5346 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5347 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5348 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5349 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5350 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5351 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5352
5353EOF
5354#+end_src
5355
33c5a5cd
AB
5356*** invade-em
5357:PROPERTIES:
5358:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5359:END:
5360
5361#+begin_src bash
5362#
5363# ANSI color scheme script featuring Space Invaders
5364#
5365# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5366# Modified by lolilolicon
5367#
5368
5369f=3 b=4
5370for j in f b; do
5371 for i in {0..7}; do
5372 printf -v $j$i %b "\e[${!j}${i}m"
5373 done
5374done
5375bld=$'\e[1m'
5376rst=$'\e[0m'
5377
5378cat << EOF
5379
5380 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5381 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5382 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5383 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5384
5385 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5386 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5387 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5388 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5389
5390
5391 $f7▌$rst
5392
5393 $f7▌$rst
5394
5395 $f7 ▄█▄ $rst
5396 $f7▄█████████▄$rst
5397 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5398
5399EOF
5400#+end_src