[~bandali/configs] / .config / alacritty / alacritty.yml

# Configuration for Alacritty, the GPU enhanced terminal emulator.

# Any items in the `env` entry below will be added as
# environment variables. Some entries may override variables
# set by alacritty itself.
#env:
  # TERM variable
  #
  # This value is used to set the `$TERM` environment variable for
  # each instance of Alacritty. If it is not present, alacritty will
  # check the local terminfo database and use `alacritty` if it is
  # available, otherwise `xterm-256color` is used.
  #TERM: xterm-256color

window:
  # Window dimensions (changes require restart)
  #
  # Specified in number of columns/lines, not pixels.
  # If both are `0`, this setting is ignored.
  dimensions:
    columns: 0
    lines: 0

  # Window padding (changes require restart)
  #
  # Blank space added around the window in pixels. This padding is scaled
  # by DPI and the specified value is always added at both opposing sides.
  padding:
    x: 2
    y: 2

  # Spread additional padding evenly around the terminal content.
  dynamic_padding: false

  # Window decorations
  #
  # Values for `decorations`:
  #     - full: Borders and title bar
  #     - none: Neither borders nor title bar
  #
  # Values for `decorations` (macOS only):
  #     - transparent: Title bar, transparent background and title bar buttons
  #     - buttonless: Title bar, transparent background, but no title bar buttons
  decorations: full

  # When true, alacritty starts maximized.
  start_maximized: false

scrolling:
  # Maximum number of lines in the scrollback buffer.
  # Specifying '0' will disable scrolling.
  history: 10000

  # Number of lines the viewport will move for every line scrolled when
  # scrollback is enabled (history > 0).
  multiplier: 3

  # Faux Scrolling
  #
  # The `faux_multiplier` setting controls the number of lines the terminal
  # should scroll when the alternate screen buffer is active. This is used
  # to allow mouse scrolling for applications like `man`.
  #
  # Specifying `0` will disable faux scrolling.
  faux_multiplier: 3

  # Scroll to the bottom when new text is written to the terminal.
  auto_scroll: false

# Spaces per Tab (changes require restart)
#
# This setting defines the width of a tab in cells.
#
# Some applications, like Emacs, rely on knowing about the width of a tab.
# To prevent unexpected behavior in these applications, it's also required to
# change the `it` value in terminfo when altering this setting.
tabspaces: 8

# Font configuration (changes require restart)
font:
  # Normal (roman) font face
  #normal:
    # Font family
    #
    # Default:
    #   - (macOS) Menlo
    #   - (Linux) monospace
    #   - (Windows) Consolas
    #family: monospace

    # The `style` can be specified to pick a specific face.
    #style: Regular

  # Bold font face
  #bold:
    # Font family
    #
    # If the bold family is not specified, it will fall back to the
    # value specified for the normal font.
    #family: monospace

    # The `style` can be specified to pick a specific face.
    #style: Bold

  # Italic font face
  #italic:
    # Font family
    #
    # If the italic family is not specified, it will fall back to the
    # value specified for the normal font.
    #family: monospace

    # The `style` can be specified to pick a specific face.
    #style: Italic

  # Point size
  size: 11.0

  # Offset is the extra space around each character. `offset.y` can be thought of
  # as modifying the line spacing, and `offset.x` as modifying the letter spacing.
  offset:
    x: 0
    y: 0

  # Glyph offset determines the locations of the glyphs within their cells with
  # the default being at the bottom. Increasing `x` moves the glyph to the right,
  # increasing `y` moves the glyph upwards.
  glyph_offset:
    x: 0
    y: 0

  # Thin stroke font rendering (macOS only)
  #
  # Thin strokes are suitable for retina displays, but for non-retina screens
  # it is recommended to set `use_thin_strokes` to `false`
  #
  # macOS >= 10.14.x:
  #
  # If the font quality on non-retina display looks bad then set
  # `use_thin_strokes` to `true` and enable font smoothing by running the
  # following command:
  #   `defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO`
  #
  # This is a global setting and will require a log out or restart to take
  # effect.
  use_thin_strokes: true

# Display the time it takes to redraw each frame.
render_timer: false

# Keep the log file after quitting Alacritty.
persistent_logging: false

# If `true`, bold text is drawn using the bright color variants.
draw_bold_text_with_bright_colors: true

# Colors (Tomorrow Night Bright)
colors:
  # Default colors
  primary:
    background: '0x000000'
    foreground: '0xeaeaea'

    # Bright and dim foreground colors
    #
    # The dimmed foreground color is calculated automatically if it is not present.
    # If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
    # is `false`, the normal foreground color will be used.
    #dim_foreground: '0x9a9a9a'
    #bright_foreground: '0xffffff'

  # Cursor colors
  #
  # Colors which should be used to draw the terminal cursor. If these are unset,
  # the cursor color will be the inverse of the cell color.
  #cursor:
  #  text: '0x000000'
  #  cursor: '0xffffff'

  # Normal colors
  normal:
    black:   '0x000000'
    red:     '0xd54e53'
    green:   '0xb9ca4a'
    yellow:  '0xe6c547'
    blue:    '0x7aa6da'
    magenta: '0xc397d8'
    cyan:    '0x70c0ba'
    white:   '0xeaeaea'

  # Bright colors
  bright:
    black:   '0x666666'
    red:     '0xff3334'
    green:   '0x9ec400'
    yellow:  '0xe7c547'
    blue:    '0x7aa6da'
    magenta: '0xb77ee0'
    cyan:    '0x54ced6'
    white:   '0xffffff'

  # Dim colors
  #
  # If the dim colors are not set, they will be calculated automatically based
  # on the `normal` colors.
  #dim:
  #  black:   '0x000000'
  #  red:     '0x8c3336'
  #  green:   '0x7a8530'
  #  yellow:  '0x97822e'
  #  blue:    '0x506d8f'
  #  magenta: '0x80638e'
  #  cyan:    '0x497e7a'
  #  white:   '0x9a9a9a'

  # Indexed Colors
  #
  # The indexed colors include all colors from 16 to 256.
  # When these are not set, they're filled with sensible defaults.
  #
  # Example:
  #   `- { index: 16, color: '0xff00ff' }`
  #
  indexed_colors: []

# Visual Bell
#
# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
# rung, the terminal background will be set to white and transition back to the
# default background color. You can control the rate of this transition by
# setting the `duration` property (represented in milliseconds). You can also
# configure the transition function by setting the `animation` property.
#
# Values for `animation`:
#   - Ease
#   - EaseOut
#   - EaseOutSine
#   - EaseOutQuad
#   - EaseOutCubic
#   - EaseOutQuart
#   - EaseOutQuint
#   - EaseOutExpo
#   - EaseOutCirc
#   - Linear
#
# Specifying a `duration` of `0` will disable the visual bell.
visual_bell:
  animation: EaseOutExpo
  duration: 0
  color: '0xffffff'

# Background opacity
#
# Window opacity as a floating point number from `0.0` to `1.0`.
# The value `0.0` is completely transparent and `1.0` is opaque.
background_opacity: 1.0

# Mouse bindings
#
# Available fields:
#   - mouse
#   - action
#   - mods (optional)
#
# Values for `mouse`:
#   - Middle
#   - Left
#   - Right
#   - Numeric identifier such as `5`
#
# All available `mods` and `action` values are documented in the key binding
# section.
mouse_bindings:
  - { mouse: Middle, action: PasteSelection }

mouse:
  # Click settings
  #
  # The `double_click` and `triple_click` settings control the time
  # alacritty should wait for accepting multiple clicks as one double
  # or triple click.
  double_click: { threshold: 300 }
  triple_click: { threshold: 300 }

  # If this is `true`, the cursor is temporarily hidden when typing.
  hide_when_typing: false

  url:
    # URL launcher
    #
    # This program is executed when clicking on a text which is recognized as a URL.
    # The URL is always added to the command as the last parameter.
    #
    # When set to `None`, URL launching will be disabled completely.
    #
    # Default:
    #   - (macOS) open
    #   - (Linux) xdg-open
    #   - (Windows) explorer
    #launcher: xdg-open

    # URL modifiers
    #
    # These are the modifiers that need to be held down for opening URLs when clicking
    # on them. The available modifiers are documented in the key binding section.
    modifiers: None

selection:
  semantic_escape_chars: ",│`|:\"' ()[]{}<>"

  # When set to `true`, selected text will be copied to the primary clipboard.
  save_to_clipboard: false

# Allow terminal applications to change Alacritty's window title.
dynamic_title: true

cursor:
  # Cursor style
  #
  # Values for `style`:
  #   - ▇ Block
  #   - _ Underline
  #   - | Beam
  style: Block

  # If this is `true`, the cursor will be rendered as a hollow box when the
  # window is not focused.
  unfocused_hollow: true

# Live config reload (changes require restart)
live_config_reload: true

# Shell
#
# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
# Entries in `shell.args` are passed unmodified as arguments to the shell.
#
# Default:
#   - (Linux/macOS) /bin/bash --login
#   - (Windows) powershell
#shell:
#  program: /bin/bash
#  args:
#    - --login

# Windows 10 ConPTY backend (Windows only)
#
# This will enable better color support and may resolve other issues,
# however this API and its implementation is still young and so is
# disabled by default, as stability may not be as good as the winpty
# backend.
#
# Alacritty will fall back to the WinPTY automatically if the ConPTY
# backend cannot be initialized.
enable_experimental_conpty_backend: false

# Send ESC (\x1b) before characters when alt is pressed.
alt_send_esc: true

# Key bindings
#
# Key bindings are specified as a list of objects. Each binding will specify a
# key and modifiers required to trigger it, terminal modes where the binding is
# applicable, and what should be done when the key binding fires. It can either
# send a byte sequence to the running application (`chars`), execute a
# predefined action (`action`) or fork and execute a specified command plus
# arguments (`command`).
#
# Bindings are always filled by default, but will be replaced when a new binding
# with the same triggers is defined. To unset a default binding, it can be
# mapped to the `None` action.
#
# Example:
#   `- { key: V, mods: Control|Shift, action: Paste }`
#
# Available fields:
#   - key
#   - mods (optional)
#   - chars | action | command (exactly one required)
#   - mode (optional)
#
# Values for `key`:
#   - `A` -> `Z`
#   - `F1` -> `F12`
#   - `Key1` -> `Key0`
#
#   A full list with available key codes can be found here:
#   https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html#variants
#
#   Instead of using the name of the keys, the `key` field also supports using
#   the scancode of the desired key. Scancodes have to be specified as a
#   decimal number.
#   This command will allow you to display the hex scancodes for certain keys:
#     `showkey --scancodes`
#
# Values for `mods`:
#   - Command
#   - Control
#   - Super
#   - Shift
#   - Alt
#
#   Multiple `mods` can be combined using `|` like this: `mods: Control|Shift`.
#   Whitespace and capitalization is relevant and must match the example.
#
# Values for `chars`:
#   The `chars` field writes the specified string to the terminal. This makes
#   it possible to pass escape sequences.
#   To find escape codes for bindings like `PageUp` ("\x1b[5~"), you can run
#   the command `showkey -a` outside of tmux.
#   Note that applications use terminfo to map escape sequences back to
#   keys. It is therefore required to update the terminfo when
#   changing an escape sequence.
#
# Values for `action`:
#   - Paste
#   - PasteSelection
#   - Copy
#   - IncreaseFontSize
#   - DecreaseFontSize
#   - ResetFontSize
#   - ScrollPageUp
#   - ScrollPageDown
#   - ScrollToTop
#   - ScrollToBottom
#   - ClearHistory
#   - Hide
#   - Quit
#   - ClearLogNotice
#   - SpawnNewInstance
#   - None
#
# Values for `command`:
#   The `command` field must be a map containing a `program` string and
#   an `args` array of command line parameter strings.
#
#   Example:
#       `command: { program: "alacritty", args: ["-e", "vttest"] }`
#
# Values for `mode`:
#   - ~AppCursor
#   - AppCursor
#   - ~AppKeypad
#   - AppKeypad
key_bindings:
  # (Windows/Linux only)
  #- { key: V,        mods: Control|Shift, action: Paste            }
  #- { key: C,        mods: Control|Shift, action: Copy             }
  #- { key: Insert,   mods: Shift,         action: PasteSelection   }
  #- { key: Key0,     mods: Control,       action: ResetFontSize    }
  #- { key: Equals,   mods: Control,       action: IncreaseFontSize }
  #- { key: Subtract, mods: Control,       action: DecreaseFontSize }

  # (macOS only)
  #- { key: Key0,   mods: Command, action: ResetFontSize    }
  #- { key: Equals, mods: Command, action: IncreaseFontSize }
  #- { key: Minus,  mods: Command, action: DecreaseFontSize }
  #- { key: K,      mods: Command, action: ClearHistory     }
  #- { key: K,      mods: Command, chars: "\x0c"            }
  #- { key: V,      mods: Command, action: Paste            }
  #- { key: C,      mods: Command, action: Copy             }
  #- { key: H,      mods: Command, action: Hide             }
  #- { key: Q,      mods: Command, action: Quit             }
  #- { key: W,      mods: Command, action: Quit             }

  - { key: Paste,                   action: Paste                            }
  - { key: Copy,                    action: Copy                             }
  - { key: L,        mods: Control, action: ClearLogNotice                   }
  - { key: L,        mods: Control, chars: "\x0c"                            }
  - { key: Home,                    chars: "\x1bOH",        mode: AppCursor  }
  - { key: Home,                    chars: "\x1b[H",        mode: ~AppCursor }
  - { key: End,                     chars: "\x1bOF",        mode: AppCursor  }
  - { key: End,                     chars: "\x1b[F",        mode: ~AppCursor }
  - { key: PageUp,   mods: Shift,   action: ScrollPageUp,   mode: ~Alt       }
  - { key: PageUp,   mods: Shift,   chars: "\x1b[5;2~",     mode: Alt        }
  - { key: PageUp,   mods: Control, chars: "\x1b[5;5~"                       }
  - { key: PageUp,                  chars: "\x1b[5~"                         }
  - { key: PageDown, mods: Shift,   action: ScrollPageDown, mode: ~Alt       }
  - { key: PageDown, mods: Shift,   chars: "\x1b[6;2~",     mode: Alt        }
  - { key: PageDown, mods: Control, chars: "\x1b[6;5~"                       }
  - { key: PageDown,                chars: "\x1b[6~"                         }
  - { key: Tab,      mods: Shift,   chars: "\x1b[Z"                          }
  - { key: Back,                    chars: "\x7f"                            }
  - { key: Back,     mods: Alt,     chars: "\x1b\x7f"                        }
  - { key: Insert,                  chars: "\x1b[2~"                         }
  - { key: Delete,                  chars: "\x1b[3~"                         }
  - { key: Left,     mods: Shift,   chars: "\x1b[1;2D"                       }
  - { key: Left,     mods: Control, chars: "\x1b[1;5D"                       }
  - { key: Left,     mods: Alt,     chars: "\x1b[1;3D"                       }
  - { key: Left,                    chars: "\x1b[D",        mode: ~AppCursor }
  - { key: Left,                    chars: "\x1bOD",        mode: AppCursor  }
  - { key: Right,    mods: Shift,   chars: "\x1b[1;2C"                       }
  - { key: Right,    mods: Control, chars: "\x1b[1;5C"                       }
  - { key: Right,    mods: Alt,     chars: "\x1b[1;3C"                       }
  - { key: Right,                   chars: "\x1b[C",        mode: ~AppCursor }
  - { key: Right,                   chars: "\x1bOC",        mode: AppCursor  }
  - { key: Up,       mods: Shift,   chars: "\x1b[1;2A"                       }
  - { key: Up,       mods: Control, chars: "\x1b[1;5A"                       }
  - { key: Up,       mods: Alt,     chars: "\x1b[1;3A"                       }
  - { key: Up,                      chars: "\x1b[A",        mode: ~AppCursor }
  - { key: Up,                      chars: "\x1bOA",        mode: AppCursor  }
  - { key: Down,     mods: Shift,   chars: "\x1b[1;2B"                       }
  - { key: Down,     mods: Control, chars: "\x1b[1;5B"                       }
  - { key: Down,     mods: Alt,     chars: "\x1b[1;3B"                       }
  - { key: Down,                    chars: "\x1b[B",        mode: ~AppCursor }
  - { key: Down,                    chars: "\x1bOB",        mode: AppCursor  }
  - { key: F1,                      chars: "\x1bOP"                          }
  - { key: F2,                      chars: "\x1bOQ"                          }
  - { key: F3,                      chars: "\x1bOR"                          }
  - { key: F4,                      chars: "\x1bOS"                          }
  - { key: F5,                      chars: "\x1b[15~"                        }
  - { key: F6,                      chars: "\x1b[17~"                        }
  - { key: F7,                      chars: "\x1b[18~"                        }
  - { key: F8,                      chars: "\x1b[19~"                        }
  - { key: F9,                      chars: "\x1b[20~"                        }
  - { key: F10,                     chars: "\x1b[21~"                        }
  - { key: F11,                     chars: "\x1b[23~"                        }
  - { key: F12,                     chars: "\x1b[24~"                        }
  - { key: F1,       mods: Shift,   chars: "\x1b[1;2P"                       }
  - { key: F2,       mods: Shift,   chars: "\x1b[1;2Q"                       }
  - { key: F3,       mods: Shift,   chars: "\x1b[1;2R"                       }
  - { key: F4,       mods: Shift,   chars: "\x1b[1;2S"                       }
  - { key: F5,       mods: Shift,   chars: "\x1b[15;2~"                      }
  - { key: F6,       mods: Shift,   chars: "\x1b[17;2~"                      }
  - { key: F7,       mods: Shift,   chars: "\x1b[18;2~"                      }
  - { key: F8,       mods: Shift,   chars: "\x1b[19;2~"                      }
  - { key: F9,       mods: Shift,   chars: "\x1b[20;2~"                      }
  - { key: F10,      mods: Shift,   chars: "\x1b[21;2~"                      }
  - { key: F11,      mods: Shift,   chars: "\x1b[23;2~"                      }
  - { key: F12,      mods: Shift,   chars: "\x1b[24;2~"                      }
  - { key: F1,       mods: Control, chars: "\x1b[1;5P"                       }
  - { key: F2,       mods: Control, chars: "\x1b[1;5Q"                       }
  - { key: F3,       mods: Control, chars: "\x1b[1;5R"                       }
  - { key: F4,       mods: Control, chars: "\x1b[1;5S"                       }
  - { key: F5,       mods: Control, chars: "\x1b[15;5~"                      }
  - { key: F6,       mods: Control, chars: "\x1b[17;5~"                      }
  - { key: F7,       mods: Control, chars: "\x1b[18;5~"                      }
  - { key: F8,       mods: Control, chars: "\x1b[19;5~"                      }
  - { key: F9,       mods: Control, chars: "\x1b[20;5~"                      }
  - { key: F10,      mods: Control, chars: "\x1b[21;5~"                      }
  - { key: F11,      mods: Control, chars: "\x1b[23;5~"                      }
  - { key: F12,      mods: Control, chars: "\x1b[24;5~"                      }
  - { key: F1,       mods: Alt,     chars: "\x1b[1;6P"                       }
  - { key: F2,       mods: Alt,     chars: "\x1b[1;6Q"                       }
  - { key: F3,       mods: Alt,     chars: "\x1b[1;6R"                       }
  - { key: F4,       mods: Alt,     chars: "\x1b[1;6S"                       }
  - { key: F5,       mods: Alt,     chars: "\x1b[15;6~"                      }
  - { key: F6,       mods: Alt,     chars: "\x1b[17;6~"                      }
  - { key: F7,       mods: Alt,     chars: "\x1b[18;6~"                      }
  - { key: F8,       mods: Alt,     chars: "\x1b[19;6~"                      }
  - { key: F9,       mods: Alt,     chars: "\x1b[20;6~"                      }
  - { key: F10,      mods: Alt,     chars: "\x1b[21;6~"                      }
  - { key: F11,      mods: Alt,     chars: "\x1b[23;6~"                      }
  - { key: F12,      mods: Alt,     chars: "\x1b[24;6~"                      }
  - { key: F1,       mods: Super,   chars: "\x1b[1;3P"                       }
  - { key: F2,       mods: Super,   chars: "\x1b[1;3Q"                       }
  - { key: F3,       mods: Super,   chars: "\x1b[1;3R"                       }
  - { key: F4,       mods: Super,   chars: "\x1b[1;3S"                       }
  - { key: F5,       mods: Super,   chars: "\x1b[15;3~"                      }
  - { key: F6,       mods: Super,   chars: "\x1b[17;3~"                      }
  - { key: F7,       mods: Super,   chars: "\x1b[18;3~"                      }
  - { key: F8,       mods: Super,   chars: "\x1b[19;3~"                      }
  - { key: F9,       mods: Super,   chars: "\x1b[20;3~"                      }
  - { key: F10,      mods: Super,   chars: "\x1b[21;3~"                      }
  - { key: F11,      mods: Super,   chars: "\x1b[23;3~"                      }
  - { key: F12,      mods: Super,   chars: "\x1b[24;3~"                      }
  - { key: NumpadEnter,             chars: "\n"                              }
Commit	Line	Data
7c8201fa AB	1	# Configuration for Alacritty, the GPU enhanced terminal emulator.
	2
	3	# Any items in the `env` entry below will be added as
	4	# environment variables. Some entries may override variables
	5	# set by alacritty itself.
	6	#env:
	7	# TERM variable
	8	#
	9	# This value is used to set the `$TERM` environment variable for
	10	# each instance of Alacritty. If it is not present, alacritty will
	11	# check the local terminfo database and use `alacritty` if it is
	12	# available, otherwise `xterm-256color` is used.
	13	#TERM: xterm-256color
	14
	15	window:
	16	# Window dimensions (changes require restart)
	17	#
	18	# Specified in number of columns/lines, not pixels.
	19	# If both are `0`, this setting is ignored.
	20	dimensions:
	21	columns: 0
	22	lines: 0
	23
	24	# Window padding (changes require restart)
	25	#
	26	# Blank space added around the window in pixels. This padding is scaled
	27	# by DPI and the specified value is always added at both opposing sides.
	28	padding:
	29	x: 2
	30	y: 2
	31
	32	# Spread additional padding evenly around the terminal content.
	33	dynamic_padding: false
	34
	35	# Window decorations
	36	#
	37	# Values for `decorations`:
	38	# - full: Borders and title bar
	39	# - none: Neither borders nor title bar
	40	#
	41	# Values for `decorations` (macOS only):
	42	# - transparent: Title bar, transparent background and title bar buttons
	43	# - buttonless: Title bar, transparent background, but no title bar buttons
	44	decorations: full
	45
	46	# When true, alacritty starts maximized.
	47	start_maximized: false
	48
	49	scrolling:
	50	# Maximum number of lines in the scrollback buffer.
	51	# Specifying '0' will disable scrolling.
	52	history: 10000
	53
	54	# Number of lines the viewport will move for every line scrolled when
	55	# scrollback is enabled (history > 0).
	56	multiplier: 3
	57
	58	# Faux Scrolling
	59	#
	60	# The `faux_multiplier` setting controls the number of lines the terminal
	61	# should scroll when the alternate screen buffer is active. This is used
	62	# to allow mouse scrolling for applications like `man`.
	63	#
	64	# Specifying `0` will disable faux scrolling.
65	faux_multiplier: 3
66
67	# Scroll to the bottom when new text is written to the terminal.
68	auto_scroll: false
69
70	# Spaces per Tab (changes require restart)
71	#
72	# This setting defines the width of a tab in cells.
73	#
74	# Some applications, like Emacs, rely on knowing about the width of a tab.
75	# To prevent unexpected behavior in these applications, it's also required to
76	# change the `it` value in terminfo when altering this setting.
77	tabspaces: 8
78
79	# Font configuration (changes require restart)
80	font:
81	# Normal (roman) font face
82	#normal:
83	# Font family
84	#
85	# Default:
86	# - (macOS) Menlo
87	# - (Linux) monospace
88	# - (Windows) Consolas
89	#family: monospace
90
91	# The `style` can be specified to pick a specific face.
92	#style: Regular
93
94	# Bold font face
95	#bold:
96	# Font family
97	#
98	# If the bold family is not specified, it will fall back to the
99	# value specified for the normal font.
100	#family: monospace
101
102	# The `style` can be specified to pick a specific face.
103	#style: Bold
104
105	# Italic font face
106	#italic:
107	# Font family
108	#
109	# If the italic family is not specified, it will fall back to the
110	# value specified for the normal font.
111	#family: monospace
112
113	# The `style` can be specified to pick a specific face.
114	#style: Italic
115
116	# Point size
117	size: 11.0
118
119	# Offset is the extra space around each character. `offset.y` can be thought of
120	# as modifying the line spacing, and `offset.x` as modifying the letter spacing.
121	offset:
122	x: 0
123	y: 0
124
125	# Glyph offset determines the locations of the glyphs within their cells with
126	# the default being at the bottom. Increasing `x` moves the glyph to the right,
127	# increasing `y` moves the glyph upwards.
128	glyph_offset:
129	x: 0
130	y: 0
131
132	# Thin stroke font rendering (macOS only)
133	#
134	# Thin strokes are suitable for retina displays, but for non-retina screens
135	# it is recommended to set `use_thin_strokes` to `false`
136	#
137	# macOS >= 10.14.x:
138	#
139	# If the font quality on non-retina display looks bad then set
140	# `use_thin_strokes` to `true` and enable font smoothing by running the
141	# following command:
142	# `defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO`
143	#
144	# This is a global setting and will require a log out or restart to take
145	# effect.
146	use_thin_strokes: true
147
148	# Display the time it takes to redraw each frame.
149	render_timer: false
150
151	# Keep the log file after quitting Alacritty.
152	persistent_logging: false
153
154	# If `true`, bold text is drawn using the bright color variants.
155	draw_bold_text_with_bright_colors: true
156
157	# Colors (Tomorrow Night Bright)
158	colors:
159	# Default colors
160	primary:
161	background: '0x000000'
162	foreground: '0xeaeaea'
163
164	# Bright and dim foreground colors
165	#
166	# The dimmed foreground color is calculated automatically if it is not present.
167	# If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
168	# is `false`, the normal foreground color will be used.
169	#dim_foreground: '0x9a9a9a'
170	#bright_foreground: '0xffffff'
171
172	# Cursor colors
173	#
174	# Colors which should be used to draw the terminal cursor. If these are unset,
175	# the cursor color will be the inverse of the cell color.
176	#cursor:
177	# text: '0x000000'
178	# cursor: '0xffffff'
179
180	# Normal colors
181	normal:
182	black: '0x000000'
183	red: '0xd54e53'
184	green: '0xb9ca4a'
185	yellow: '0xe6c547'
186	blue: '0x7aa6da'
187	magenta: '0xc397d8'
188	cyan: '0x70c0ba'
189	white: '0xeaeaea'
190
191	# Bright colors
192	bright:
193	black: '0x666666'
194	red: '0xff3334'
195	green: '0x9ec400'
196	yellow: '0xe7c547'
197	blue: '0x7aa6da'
198	magenta: '0xb77ee0'
199	cyan: '0x54ced6'
200	white: '0xffffff'
201
202	# Dim colors
203	#
204	# If the dim colors are not set, they will be calculated automatically based
205	# on the `normal` colors.
206	#dim:
207	# black: '0x000000'
208	# red: '0x8c3336'
209	# green: '0x7a8530'
210	# yellow: '0x97822e'
211	# blue: '0x506d8f'
212	# magenta: '0x80638e'
213	# cyan: '0x497e7a'
214	# white: '0x9a9a9a'
215
216	# Indexed Colors
217	#
218	# The indexed colors include all colors from 16 to 256.
219	# When these are not set, they're filled with sensible defaults.
220	#
221	# Example:
222	# `- { index: 16, color: '0xff00ff' }`
223	#
224	indexed_colors: []
225
226	# Visual Bell
227	#
228	# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
229	# rung, the terminal background will be set to white and transition back to the
230	# default background color. You can control the rate of this transition by
231	# setting the `duration` property (represented in milliseconds). You can also
232	# configure the transition function by setting the `animation` property.
233	#
234	# Values for `animation`:
235	# - Ease
236	# - EaseOut
237	# - EaseOutSine
238	# - EaseOutQuad
239	# - EaseOutCubic
240	# - EaseOutQuart
241	# - EaseOutQuint
242	# - EaseOutExpo
243	# - EaseOutCirc
244	# - Linear
245	#
246	# Specifying a `duration` of `0` will disable the visual bell.
247	visual_bell:
248	animation: EaseOutExpo
249	duration: 0
250	color: '0xffffff'
251
252	# Background opacity
253	#
254	# Window opacity as a floating point number from `0.0` to `1.0`.
255	# The value `0.0` is completely transparent and `1.0` is opaque.
256	background_opacity: 1.0
257
258	# Mouse bindings
259	#
260	# Available fields:
261	# - mouse
262	# - action
263	# - mods (optional)
264	#
265	# Values for `mouse`:
266	# - Middle
267	# - Left
268	# - Right
269	# - Numeric identifier such as `5`
270	#
271	# All available `mods` and `action` values are documented in the key binding
272	# section.
273	mouse_bindings:
274	- { mouse: Middle, action: PasteSelection }
275
276	mouse:
277	# Click settings
278	#
279	# The `double_click` and `triple_click` settings control the time
280	# alacritty should wait for accepting multiple clicks as one double
281	# or triple click.
282	double_click: { threshold: 300 }
283	triple_click: { threshold: 300 }
284
285	# If this is `true`, the cursor is temporarily hidden when typing.
286	hide_when_typing: false
287
288	url:
289	# URL launcher
290	#
291	# This program is executed when clicking on a text which is recognized as a URL.
292	# The URL is always added to the command as the last parameter.
293	#
294	# When set to `None`, URL launching will be disabled completely.
295	#
296	# Default:
297	# - (macOS) open
298	# - (Linux) xdg-open
299	# - (Windows) explorer
300	#launcher: xdg-open
301
302	# URL modifiers
303	#
304	# These are the modifiers that need to be held down for opening URLs when clicking
305	# on them. The available modifiers are documented in the key binding section.
306	modifiers: None
307
308	selection:
309	semantic_escape_chars: ",│`\|:\"' ()[]{}<>"
310
311	# When set to `true`, selected text will be copied to the primary clipboard.
312	save_to_clipboard: false
313
314	# Allow terminal applications to change Alacritty's window title.
315	dynamic_title: true
316
317	cursor:
318	# Cursor style
319	#
320	# Values for `style`:
321	# - ▇ Block
322	# - _ Underline
323	# - \| Beam
324	style: Block
325
326	# If this is `true`, the cursor will be rendered as a hollow box when the
327	# window is not focused.
328	unfocused_hollow: true
329
330	# Live config reload (changes require restart)
331	live_config_reload: true
332
333	# Shell
334	#
335	# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
336	# Entries in `shell.args` are passed unmodified as arguments to the shell.
337	#
338	# Default:
339	# - (Linux/macOS) /bin/bash --login
340	# - (Windows) powershell
341	#shell:
342	# program: /bin/bash
343	# args:
344	# - --login
345
346	# Windows 10 ConPTY backend (Windows only)
347	#
348	# This will enable better color support and may resolve other issues,
349	# however this API and its implementation is still young and so is
350	# disabled by default, as stability may not be as good as the winpty
351	# backend.
352	#
353	# Alacritty will fall back to the WinPTY automatically if the ConPTY
354	# backend cannot be initialized.
355	enable_experimental_conpty_backend: false
356
357	# Send ESC (\x1b) before characters when alt is pressed.
358	alt_send_esc: true
359
360	# Key bindings
361	#
362	# Key bindings are specified as a list of objects. Each binding will specify a
363	# key and modifiers required to trigger it, terminal modes where the binding is
364	# applicable, and what should be done when the key binding fires. It can either
365	# send a byte sequence to the running application (`chars`), execute a
366	# predefined action (`action`) or fork and execute a specified command plus
367	# arguments (`command`).
368	#
369	# Bindings are always filled by default, but will be replaced when a new binding
370	# with the same triggers is defined. To unset a default binding, it can be
371	# mapped to the `None` action.
372	#
373	# Example:
374	# `- { key: V, mods: Control\|Shift, action: Paste }`
375	#
376	# Available fields:
377	# - key
378	# - mods (optional)
379	# - chars \| action \| command (exactly one required)
380	# - mode (optional)
381	#
382	# Values for `key`:
383	# - `A` -> `Z`
384	# - `F1` -> `F12`
385	# - `Key1` -> `Key0`
386	#
387	# A full list with available key codes can be found here:
388	# https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html#variants
389	#
390	# Instead of using the name of the keys, the `key` field also supports using
391	# the scancode of the desired key. Scancodes have to be specified as a
392	# decimal number.
393	# This command will allow you to display the hex scancodes for certain keys:
394	# `showkey --scancodes`
395	#
396	# Values for `mods`:
397	# - Command
398	# - Control
399	# - Super
400	# - Shift
401	# - Alt
402	#
403	# Multiple `mods` can be combined using `\|` like this: `mods: Control\|Shift`.
404	# Whitespace and capitalization is relevant and must match the example.
405	#
406	# Values for `chars`:
407	# The `chars` field writes the specified string to the terminal. This makes
408	# it possible to pass escape sequences.
409	# To find escape codes for bindings like `PageUp` ("\x1b[5~"), you can run
410	# the command `showkey -a` outside of tmux.
411	# Note that applications use terminfo to map escape sequences back to
412	# keys. It is therefore required to update the terminfo when
413	# changing an escape sequence.
414	#
415	# Values for `action`:
416	# - Paste
417	# - PasteSelection
418	# - Copy
419	# - IncreaseFontSize
420	# - DecreaseFontSize
421	# - ResetFontSize
422	# - ScrollPageUp
423	# - ScrollPageDown
424	# - ScrollToTop
425	# - ScrollToBottom
426	# - ClearHistory
427	# - Hide
428	# - Quit
429	# - ClearLogNotice
430	# - SpawnNewInstance
431	# - None
432	#
433	# Values for `command`:
434	# The `command` field must be a map containing a `program` string and
435	# an `args` array of command line parameter strings.
436	#
437	# Example:
438	# `command: { program: "alacritty", args: ["-e", "vttest"] }`
439	#
440	# Values for `mode`:
441	# - ~AppCursor
442	# - AppCursor
443	# - ~AppKeypad
444	# - AppKeypad
445	key_bindings:
446	# (Windows/Linux only)
447	#- { key: V, mods: Control\|Shift, action: Paste }
448	#- { key: C, mods: Control\|Shift, action: Copy }
449	#- { key: Insert, mods: Shift, action: PasteSelection }
450	#- { key: Key0, mods: Control, action: ResetFontSize }
451	#- { key: Equals, mods: Control, action: IncreaseFontSize }
452	#- { key: Subtract, mods: Control, action: DecreaseFontSize }
453
454	# (macOS only)
455	#- { key: Key0, mods: Command, action: ResetFontSize }
456	#- { key: Equals, mods: Command, action: IncreaseFontSize }
457	#- { key: Minus, mods: Command, action: DecreaseFontSize }
458	#- { key: K, mods: Command, action: ClearHistory }
459	#- { key: K, mods: Command, chars: "\x0c" }
460	#- { key: V, mods: Command, action: Paste }
461	#- { key: C, mods: Command, action: Copy }
462	#- { key: H, mods: Command, action: Hide }
463	#- { key: Q, mods: Command, action: Quit }
464	#- { key: W, mods: Command, action: Quit }
465
466	- { key: Paste, action: Paste }
467	- { key: Copy, action: Copy }
468	- { key: L, mods: Control, action: ClearLogNotice }
469	- { key: L, mods: Control, chars: "\x0c" }
470	- { key: Home, chars: "\x1bOH", mode: AppCursor }
471	- { key: Home, chars: "\x1b[H", mode: ~AppCursor }
472	- { key: End, chars: "\x1bOF", mode: AppCursor }
473	- { key: End, chars: "\x1b[F", mode: ~AppCursor }
474	- { key: PageUp, mods: Shift, action: ScrollPageUp, mode: ~Alt }
475	- { key: PageUp, mods: Shift, chars: "\x1b[5;2~", mode: Alt }
476	- { key: PageUp, mods: Control, chars: "\x1b[5;5~" }
477	- { key: PageUp, chars: "\x1b[5~" }
478	- { key: PageDown, mods: Shift, action: ScrollPageDown, mode: ~Alt }
479	- { key: PageDown, mods: Shift, chars: "\x1b[6;2~", mode: Alt }
480	- { key: PageDown, mods: Control, chars: "\x1b[6;5~" }
481	- { key: PageDown, chars: "\x1b[6~" }
482	- { key: Tab, mods: Shift, chars: "\x1b[Z" }
483	- { key: Back, chars: "\x7f" }
484	- { key: Back, mods: Alt, chars: "\x1b\x7f" }
485	- { key: Insert, chars: "\x1b[2~" }
486	- { key: Delete, chars: "\x1b[3~" }
487	- { key: Left, mods: Shift, chars: "\x1b[1;2D" }
488	- { key: Left, mods: Control, chars: "\x1b[1;5D" }
489	- { key: Left, mods: Alt, chars: "\x1b[1;3D" }
490	- { key: Left, chars: "\x1b[D", mode: ~AppCursor }
491	- { key: Left, chars: "\x1bOD", mode: AppCursor }
492	- { key: Right, mods: Shift, chars: "\x1b[1;2C" }
493	- { key: Right, mods: Control, chars: "\x1b[1;5C" }
494	- { key: Right, mods: Alt, chars: "\x1b[1;3C" }
495	- { key: Right, chars: "\x1b[C", mode: ~AppCursor }
496	- { key: Right, chars: "\x1bOC", mode: AppCursor }
497	- { key: Up, mods: Shift, chars: "\x1b[1;2A" }
498	- { key: Up, mods: Control, chars: "\x1b[1;5A" }
499	- { key: Up, mods: Alt, chars: "\x1b[1;3A" }
500	- { key: Up, chars: "\x1b[A", mode: ~AppCursor }
501	- { key: Up, chars: "\x1bOA", mode: AppCursor }
502	- { key: Down, mods: Shift, chars: "\x1b[1;2B" }
503	- { key: Down, mods: Control, chars: "\x1b[1;5B" }
504	- { key: Down, mods: Alt, chars: "\x1b[1;3B" }
505	- { key: Down, chars: "\x1b[B", mode: ~AppCursor }
506	- { key: Down, chars: "\x1bOB", mode: AppCursor }
507	- { key: F1, chars: "\x1bOP" }
508	- { key: F2, chars: "\x1bOQ" }
509	- { key: F3, chars: "\x1bOR" }
510	- { key: F4, chars: "\x1bOS" }
511	- { key: F5, chars: "\x1b[15~" }
512	- { key: F6, chars: "\x1b[17~" }
513	- { key: F7, chars: "\x1b[18~" }
514	- { key: F8, chars: "\x1b[19~" }
515	- { key: F9, chars: "\x1b[20~" }
516	- { key: F10, chars: "\x1b[21~" }
517	- { key: F11, chars: "\x1b[23~" }
518	- { key: F12, chars: "\x1b[24~" }
519	- { key: F1, mods: Shift, chars: "\x1b[1;2P" }
520	- { key: F2, mods: Shift, chars: "\x1b[1;2Q" }
521	- { key: F3, mods: Shift, chars: "\x1b[1;2R" }
522	- { key: F4, mods: Shift, chars: "\x1b[1;2S" }
523	- { key: F5, mods: Shift, chars: "\x1b[15;2~" }
524	- { key: F6, mods: Shift, chars: "\x1b[17;2~" }
525	- { key: F7, mods: Shift, chars: "\x1b[18;2~" }
526	- { key: F8, mods: Shift, chars: "\x1b[19;2~" }
527	- { key: F9, mods: Shift, chars: "\x1b[20;2~" }
528	- { key: F10, mods: Shift, chars: "\x1b[21;2~" }
529	- { key: F11, mods: Shift, chars: "\x1b[23;2~" }
530	- { key: F12, mods: Shift, chars: "\x1b[24;2~" }
531	- { key: F1, mods: Control, chars: "\x1b[1;5P" }
532	- { key: F2, mods: Control, chars: "\x1b[1;5Q" }
533	- { key: F3, mods: Control, chars: "\x1b[1;5R" }
534	- { key: F4, mods: Control, chars: "\x1b[1;5S" }
535	- { key: F5, mods: Control, chars: "\x1b[15;5~" }
536	- { key: F6, mods: Control, chars: "\x1b[17;5~" }
537	- { key: F7, mods: Control, chars: "\x1b[18;5~" }
538	- { key: F8, mods: Control, chars: "\x1b[19;5~" }
539	- { key: F9, mods: Control, chars: "\x1b[20;5~" }
540	- { key: F10, mods: Control, chars: "\x1b[21;5~" }
541	- { key: F11, mods: Control, chars: "\x1b[23;5~" }
542	- { key: F12, mods: Control, chars: "\x1b[24;5~" }
543	- { key: F1, mods: Alt, chars: "\x1b[1;6P" }
544	- { key: F2, mods: Alt, chars: "\x1b[1;6Q" }
545	- { key: F3, mods: Alt, chars: "\x1b[1;6R" }
546	- { key: F4, mods: Alt, chars: "\x1b[1;6S" }
547	- { key: F5, mods: Alt, chars: "\x1b[15;6~" }
548	- { key: F6, mods: Alt, chars: "\x1b[17;6~" }
549	- { key: F7, mods: Alt, chars: "\x1b[18;6~" }
550	- { key: F8, mods: Alt, chars: "\x1b[19;6~" }
551	- { key: F9, mods: Alt, chars: "\x1b[20;6~" }
552	- { key: F10, mods: Alt, chars: "\x1b[21;6~" }
553	- { key: F11, mods: Alt, chars: "\x1b[23;6~" }
554	- { key: F12, mods: Alt, chars: "\x1b[24;6~" }
555	- { key: F1, mods: Super, chars: "\x1b[1;3P" }
556	- { key: F2, mods: Super, chars: "\x1b[1;3Q" }
557	- { key: F3, mods: Super, chars: "\x1b[1;3R" }
558	- { key: F4, mods: Super, chars: "\x1b[1;3S" }
559	- { key: F5, mods: Super, chars: "\x1b[15;3~" }
560	- { key: F6, mods: Super, chars: "\x1b[17;3~" }
561	- { key: F7, mods: Super, chars: "\x1b[18;3~" }
562	- { key: F8, mods: Super, chars: "\x1b[19;3~" }
563	- { key: F9, mods: Super, chars: "\x1b[20;3~" }
564	- { key: F10, mods: Super, chars: "\x1b[21;3~" }
565	- { key: F11, mods: Super, chars: "\x1b[23;3~" }
566	- { key: F12, mods: Super, chars: "\x1b[24;3~" }
567	- { key: NumpadEnter, chars: "\n" }