[rc/notmuch] shuffle around some tags
[~bandali/configs] / rc.org
CommitLineData
08146d0e
AB
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
b13e2dc1
AB
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
b13e2dc1
AB
17** bspwm
18
19*** bspwmrc
20:PROPERTIES:
21:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22:END:
23
24#+begin_src sh
25sxhkd &
26sh ~/.fehbg &
27xfce4-panel -d &
87af8efd 28compton &
b13e2dc1
AB
29sleep 0.5 && pasystray --notify=all &
30
31bspc monitor -d I II III IV V VI VII VIII IX X
32#bspc monitor eDP-1 -d I II III IV V
33#bspc monitor HDMI-1 -d VI VII VIII IX X
34
35#bspc config border_width 2
36#bspc config window_gap 8
37bspc config window_gap 0
38
39bspc config bottom_padding 26
40
41bspc config split_ratio 0.52
42bspc config borderless_monocle true
43bspc config gapless_monocle true
44bspc config click_to_focus button1
45bspc config directional_focus_tightness low
46
87af8efd 47#bspc rule -a Firefox desktop='^1' follow=on
b13e2dc1
AB
48bspc rule -a Nightly desktop='^1' follow=on
49bspc rule -a Emacs desktop='^2' state=tiled follow=on
50#bspc rule -a Chromium desktop='^4' follow=on
51bspc rule -a URxvt state=floating
52bspc rule -a URxvt:tiled state=tiled
53bspc rule -a Connman-gtk state=floating
54bspc rule -a Xfce4-panel state=floating
55bspc rule -a TelegramDesktop state=floating
56bspc rule -a Ec state=floating
57bspc rule -a Pavucontrol state=floating
58bspc rule -a Eog state=floating
59bspc rule -a Seahorse state=floating
60bspc rule -a mpv state=floating
61bspc rule -a Evince state=floating
62bspc rule -a Meld state=floating
63bspc rule -a Autokey-gtk state=floating
64bspc rule -a Mousepad state=floating
65bspc rule -a Wrapper-1.0 state=floating
66bspc rule -a File-roller state=floating
67bspc rule -a Gnome-disks state=floating
68bspc rule -a Termite state=floating
69bspc rule -a Termite:tiled state=tiled
70bspc rule -a Thunderbird:Calendar state=floating
71bspc rule -a Audacity state=floating
72bspc rule -a Proof state=floating # pvs x-show-proof
73bspc rule -a Nm-connection-editor state=floating
74bspc rule -a Wire state=floating
75bspc rule -a discord state=floating
76bspc rule -a X2goclient state=floating
77bspc rule -a SimpleScreenRecorder state=floating
78bspc rule -a Gimp state=floating
79bspc rule -a Wrapper-2.0 state=floating
80bspc rule -a Zathura state=tiled
81#+end_src
82
83*** sxhkdrc
84:PROPERTIES:
85:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86:END:
87
88#+begin_src conf
89#
90# wm independent hotkeys
91#
92
93# terminal emulator
94super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97#super + {_,shift} + Return
98# termite{_, --name=tiled}
99
100# program launcher
101super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104super + alt + space
105 xfce4-popup-whiskermenu
106
107# window finder
108super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111# password manager
112alt + space
113 rofi-pass
114
115# firefox
116#super + r
117# firefox
118
119# chromium
120#super + c
121# chromium -incognito
122
123# emacs
124super + e
125 emacs
126
127# make sxhkd reload its configuration files:
128super + Escape
129 pkill -USR1 -x sxhkd
130
131# volume {up,down}
132XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135# mute
136XF86AudioMute
137 pamixer --toggle-mute
138
373a060a
AB
139XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
b13e2dc1
AB
142# playback control
143XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146# lock the screen
147super + shift + q
148 light-locker-command -l
149
150# Toggle keyboard layout
151super + F7
152 toggle-layout
153
154# Toggle Xfce presentation mode
155XF86LaunchB
156 toggle-presentation-mode
157
158# monitor brightness
159XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162super + apostrophe
163 rofi-light
164
165# keyboard brightness
166#XF86KbdBrightness{Up,Down}
167# kbdlight {up,down}
168
72f329ba
AB
169XF86RotateWindows
170 toggle-tablet
171
b13e2dc1
AB
172#
173# bspwm hotkeys
174#
175
176# quit bspwm normally
177super + alt + Escape
178 bspc quit
179
180# close and kill
181super + {w,q}
182 bspc node -{c,k}
183
184# alternate between the tiled and monocle layout
185super + m
186 bspc desktop -l next
187
188# send the newest marked node to the newest preselected node
189super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192# swap the current node and the biggest node
193super + g
194 bspc node -s biggest
195
196#
197# state/flags
198#
199
200# set the window state
201super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204# set the node flags
205super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208#
209# focus/swap
210#
211
212# focus the node in the given direction
213super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216# focus the node for the given path jump
217super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220# focus the next/previous node in the current desktop
221super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224# focus the next/previous desktop in the current monitor
225super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228# send to next/prev desktop
229super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232# focus the last node/desktop
233super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236# focus the older or newer node in the focus history
237super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242# focus or send to the given desktop
243super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246#
247# preselect
248#
249
250# preselect the direction
251super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254# preselect the ratio
255super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258# cancel the preselection for the focused node
259super + ctrl + space
260 bspc node -p cancel
261
262# cancel the preselection for the focused desktop
263super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266#
267# move/resize
268#
269
270# expand a window by moving one of its side outward
271super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274# contract a window by moving one of its side inward
275super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278# move a floating window
279super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282#alt + bracket{left,right}
283# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284#+end_src
285
286** compton
287:PROPERTIES:
288:header-args+: :tangle ~/.config/compton.conf
289:END:
290
291#+begin_src conf
292# Shadow
293shadow = false; # Enabled client-side shadows on windows.
294no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295no-dnd-shadow = true; # Don't draw shadows on DND windows.
296clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298shadow-radius = 5; # The blur radius for shadows. (default 12)
299shadow-offset-x = -5; # The left offset for shadows. (default -15)
300shadow-offset-y = -5; # The top offset for shadows. (default -15)
301# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306# shadow-exclude = "n:e:Notification";
307#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311# Opacity
312menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323# blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326# blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332# Fading
333fading = false; # Fade windows during opacity changes.
334fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338fade-exclude = [ ]; # Exclude conditions for fading.
339
340# Other
341backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355dbe = false; # Enable DBE painting mode. Rarely needed.
356paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368# GLX backend # GLX backend fine-tune options. See man page for more info.
369glx-no-stencil = true; # Recommended.
370glx-copy-from-front = false; # Useful with --glx-swap-method,
371# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372# glx-no-rebind-pixmap = true; # Recommended if it works.
373glx-no-rebind-pixmap = true; # Recommended if it works.
374#glx-swap-method = "4"; # See man page.
375glx-swap-method = "4"; # See man page.
376
377# Window type settings
378wintypes:
379{
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389};
390#+end_src
391
05ab13aa
AB
392** Dunst
393:PROPERTIES:
394:header-args+: :tangle ~/.config/dunst/dunstrc
395:END:
396
397#+begin_src conf
398[global]
399#font = Ubuntu Mono 10.5
400font = Inconsolata 11
401
402# Path to default icons.
403icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405icon_position = left
406# <b>bold</b>
407# <i>italic</i>
408# <s>strikethrough<s/>
409# <u>underline</u>
410markup = full
411# The format of the message. Possible variables are:
412# %a appname
413# %s summary
414# %b body
415# %i iconname (including its path)
416# %I iconname (without its path)
417# %p progress value if set ([ 0%] to [100%]) or nothing
418# Markup is allowed
419format = "<b>%s</b>\n%b"
420# Sort messages by urgency
421sort = yes
422# Show how many messages are currently hidden (because of geometry)
423indicate_hiddenl= no
424# Alignment of message text.
425# Possible values are "left", "center" and "right"
426alignment = center
427# The frequency with wich text that is longer than the notification
428# window allows bounces back and forth.
429# This option conflicts with 'word_wrap'.
430# Set to 0 to disable
431bounce_freq = 3
432# show age of message if message is older than show_age_threshold seconds.
433# set to -1 to disable
434show_age_threshold = -1
435# split notifications into multiple lines if they don't fit into geometry
436word_wrap = yes
437# ignore newlines '\n' in notifications
438ignore_newline = no
439# The geometry of the message window.
440# geometry [{width}]x{height}][+/-{x}+/-{y}]
441# The height is measured in number of notifications everything else in pixels. If the width
442# is omitted but the height is given ("-geometry x2"), the message window
443# expands over the whole screen (dmenu-like). If width is 0,
444# the window expands to the longest message displayed.
445# A positive x is measured from the left, a negative from the
446# right side of the screen. Y is measured from the top and down respectevly.
447# The width can be negative. In this case the actual width is the
448# screen width minus the width defined in within the geometry option.
449#geometry = "410x12-12+12"
450#geometry = "0x0-30-30"
451geometry = "260x12-30-30"
452# The transparency of the window. range: [0; 100]
453# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454transparency = 0
455# Don't remove messages, if the user is idle (no mouse or keyboard input)
456# for longer than idle_threshold seconds.
457# Set to 0 to disable.
458idle_threshold = 120
459# Which monitor should the notifications be displayed on.
460monitor = 0
461# Display notification on focused monitor. Possible modes are:
462# mouse: follow mouse pointer
463# keyboard: follow window with keyboard focus
464# none: don't follow anything
465#
466# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467# This should be the case for almost all modern windowmanagers.
468#
469# If this option is set to mouse or keyboard, the monitor option will be
470# ignored.
471follow = keyboard
472# should a notification popped up from history be sticky or
473# timeout as if it would normally do.
474sticky_history = yes
475# The height of a single line. If the height is smaller than the font height,
476# it will get raised to the font height.
477# This adds empty space above and under the text.
478line_height = 0
479
480show_indicators = yes
481
482# Draw a line of 'separatpr_height' pixel height between two notifications.
483# Set to 0 to disable
484separator_height = 3
485# padding between text and separator
486padding = 8
487# horizontal padding
488horizontal_padding = 8
489# Define a color for the separator.
490# possible values are:
491# * auto: dunst tries to find a color fitting to the background
492# * foreground: use the same color as the foreground
493# * frame: use the same color as the frame.
494# * anything else will be interpreted as a X color
495separator_color = foreground
496# print a notification on startup
497# This is mainly for error detection, since dbus (re-)starts dunst
498# automatically after a crash.
499startup_notification = false
500# dmenu path
501#dmenu = /usr/bin/dmenu -p dunst:
502dmenu = /usr/bin/rofi -dmenu -p dunst:
503# browser for opening urls in context menu
504browser = /usr/bin/firefox -new-tab
505[frame]
506width = 0
507color = "#377222"
508[shortcuts]
509# shortcuts are specified as [modifier+][modifier+]...key
510# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511# and 'mod4' (windows-key)
512# xev might be helpful to find names for keys
513# close notification
514close = ctrl+space
515# close all notifications
516close_all = ctrl+shift+space
517# redisplay last message(s)
518# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519history = ctrl+shift+h
520# context menu
521context = ctrl+shift+period
522[urgency_low]
523# IMPORTANT: colors have to be defined in quotation marks.
524# Otherwise the '#' and following would be interpreted as a comment.
525background = "#1d2a30"
526foreground = "#71c2af"
527timeout = 3
528[urgency_normal]
529background = "#1d2a30"
530foreground = "#71c2af"
531timeout = 0
532[urgency_critical]
533background = "#1d2a30"
534foreground = "#ff9982"
535timeout = 0
536
537# Every section that isn't one of the above is interpreted as a rules
538# to override settings for certain messages.
539# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540# and you can override the 'timeout', 'urgency', 'foreground', 'background'
541# and 'format'.
542# Shell-like globbing will get expanded.
543#
544# SCRIPTING
545# you can specify a script that gets run when the rule matches by setting
546# the 'script' option.
547# The script will be called as follows:
548# script appname summary body icon urgency
549# where urgency can be "LOW", "NORMAL" or "CRITICAL".
550#
551# NOTE: if you don't want a notification to be displayed, set the format to ""
552# NOTE: It might be helpful to run dunst -print in a terminal in order to find
553# fitting options for rules.
554#[espeak]
555# summary = "*"
556# script = dunst_espeak.sh
557#[script-test]
558# summary = "*script*"
559# script = dunst_test.sh
560#[ignore]
561## This notification will not be displayed
562# summary = "foobar"
563# format = ""
564#[signed_on]
565# appname = Pidgin
566# summary = "*signed on*"
567# urgency = low
568#
569#[signed_off]
570# appname = Pidgin
571# summary = *signed off*
572# urgency = low
573#
574#[says]
575# appname = Pidgin
576# summary = *says*
577# urgency = critical
578#
579#[twitter]
580# appname = Pidgin
581# summary = *twitter.com*
582# urgency = normal
583#
584[xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587#+end_src
588
589** Fontconfig
590:PROPERTIES:
45d84997 591:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
05ab13aa
AB
592:END:
593
594#+begin_src xml
595<?xml version="1.0"?>
596<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597<fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
628 <accept>
629 <family>Liberation Sans</family>
630 </accept>
631</alias>
632</fontconfig>
633#+end_src
634
58cbbce2 635** Git
08146d0e
AB
636
637*** gitconfig
638:PROPERTIES:
639:header-args+: :tangle ~/.gitconfig
640:END:
641
642**** user
643#+begin_src conf
644[user]
645 name = Amin Bandali
646 email = amin@aminb.org
5c7c14c7 647 signingkey = 4E05246AB0BF7FFB
08146d0e
AB
648#+end_src
649
650**** signing
651#+begin_src conf
5c7c14c7
AB
652[commit]
653 gpgsign = true
08146d0e
AB
654# [format]
655# signoff = true
656#+end_src
657
658**** core
659#+begin_src conf
660[core]
661 autocrlf = input # CRLF -> LF on commit
662 editor = emacsclient -t
663 excludesfile = ~/.gitignore_global
664 pager = "less"
665#+end_src
666
667**** gpg
668#+begin_src conf
669[gpg]
670 program = gpg2
671#+end_src
672
673**** alias
674#+begin_src conf
675[alias]
676 git = !exec git # handle nested git calls, e.g. git git status
677 aliases = config --get-regexp '^alias\\.'
678 a = add
679 s = status
680 sl = status --long
681 c = checkout
682 cb = checkout -b
683 b = branch
684 r = rebase
685 p = pull
686 pr = pull --rebase
687 ps = push
688 psf = push --force
689#+end_src
690
691**** color
692#+begin_src conf
693[color]
694 ui = auto
695[color "status"]
696 added = green bold
697 changed = red bold
698 untracked = red bold
699[color "branch"]
700 current = green bold
701 remote = magenta bold
702[color "diff"]
703 new = green bold
704 old = red bold
705#+end_src
706
707**** status
708#+begin_src conf
709[status]
710 # showUntrackedFiles = all
711 short=true
712 branch=true
713#+end_src
714
715**** github
716#+begin_src conf
717[github]
718 user = aminb
719#+end_src
720
5c7c14c7
AB
721**** send-email
722#+begin_src conf
723[sendemail]
724 smtpuser = amin@aminb.org
725 smtpserver = nix.aminb.org
726 smtpserverport = 587
727 smtpencryption = tls
728 annotate = yes
729#+end_src
730
08146d0e
AB
731*** gitignore
732:PROPERTIES:
733:header-args+: :tangle ~/.gitignore_global
734:END:
735
736#+begin_src conf
737*.orig
738*.py[co]
739*.sublime-workspace
740*~
741.DS_Store
742*.elc
743*-autoloads.el
744#+end_src
58cbbce2
AB
745
746** Latexmk
747:PROPERTIES:
748:header-args+: :tangle ~/.latexmkrc
749:END:
750
751#+begin_src conf
752$pdf_previewer = "start zathura %O %S";
753$clean_ext = "aux out";
754
755# $pdf_update_method = 4;
756# $pdf_update_command = "zathura %O %S";
757
758# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
759# by Ctrl+click in the PDF.
760# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
761# editor.
762# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
763#+end_src
b13e2dc1 764
434b1815
AB
765** libinput
766
767Improve XPS 15 9560's touchpad experience.
768
769#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
770Section "InputClass"
771 Identifier "libinput touchpad catchall"
772 Driver "libinput"
773 MatchIsTouchpad "on"
774 Option "ClickMethod" "clickfinger"
775 Option "NaturalScrolling" "true"
776 Option "Tapping" "on"
777 Option "TappingButtonMap" "lrm"
778EndSection
779#+end_src
780
931a4b06
AB
781** getmail
782
783*** getmailrc
784:PROPERTIES:
785:header-args+: :tangle ~/.getmail/getmailrc
786:END:
787
788#+begin_src conf
789[retriever]
790type = SimplePOP3SSLRetriever
791server = fencepost.gnu.org
792username = aminb
18faca55 793password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
931a4b06
AB
794port = 995
795use_apop = True
796
797[destination]
798type = Maildir
799path = ~/mail/gnu/Inbox/
800
801[options]
802delete = True
803#+end_src
804
805*** getmail.service
806:PROPERTIES:
807:header-args+: :tangle ~/.config/systemd/user/getmail.service
808:END:
809
810#+begin_src conf :tangle no
811[Unit]
812Description=getmail service
813
814[Service]
815Type=oneshot
816ExecStart=/usr/bin/getmail
817StandardOutput=syslog
818StandardError=syslog
819#+end_src
820
821*** getmail.timer
822:PROPERTIES:
823:header-args+: :tangle ~/.config/systemd/user/getmail.timer
824:END:
825
826#+begin_src conf :tangle no
827[Unit]
828Description=getmail timer
829
830[Timer]
831OnCalendar=*:0/30
832Persistent=true
833Unit=getmail.service
834
835[Install]
836WantedBy=timers.target
837#+end_src
838
839** GnuPG
840:PROPERTIES:
841:header-args+: :tangle ~/.gnupg/gpg-agent.conf
842:END:
843
844#+begin_src conf
845default-cache-ttl 43200
846max-cache-ttl 43200
847
848default-cache-ttl-ssh 10800
849max-cache-ttl-ssh 10800
850
851# pinentry-program /usr/bin/pinentry-qt
852#+end_src
853
be76c6db
AB
854** GTK
855
856*** gtk-2.0
857:PROPERTIES:
858:header-args+: :tangle ~/.gtkrc-2.0
859:END:
860
861#+begin_src conf
862gtk-theme-name="Greybird"
863gtk-icon-theme-name="Paper"
864gtk-font-name="Ubuntu 10"
865gtk-menu-images=0
866# gtk-key-theme-name = "Emacs"
867#+end_src
868
869*** gtk-3.0
870:PROPERTIES:
871:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
872:END:
873
874#+begin_src conf :tangle no
875[Settings]
876gtk-icon-theme-name = Paper
877# gtk-theme-name = Adwaita
878
879gtk-theme-name = Greybird
880# gtk-theme-name = Arc-Darker
881# gtk-theme-name = Numix-ArchBlue
882
883gtk-font-name = Ubuntu 10
884# gtk-key-theme-name = Emacs
885#+end_src
886
887** isync
888
889*** mbsyncrc
890:PROPERTIES:
891:header-args+: :tangle ~/.mbsyncrc
892:END:
893
894#+begin_src conf
895# Global defaults
896CopyArrivalDate yes
897
898######
899IMAPAccount amin
900Host nix.aminb.org
901User amin@aminb.org
902PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
903SSLType IMAPS
904
905IMAPStore amin-remote
906Account amin
907
908MaildirStore amin-local
909Path ~/mail/amin/
910Inbox ~/mail/amin/Inbox
911SubFolders Verbatim
912
913Channel amin
914Master :amin-remote:
915Slave :amin-local:
916Patterns * !dovecot*
917Create Both
918SyncState *
919
920######
921IMAPAccount uwaterloo
922Host connect.uwaterloo.ca
59027673 923User abandali
be76c6db
AB
924PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
925SSLType IMAPS
926
927IMAPStore uwaterloo-remote
928Account uwaterloo
929
930MaildirStore uwaterloo-local
931Path ~/mail/uwaterloo/
932Inbox ~/mail/uwaterloo/Inbox
933SubFolders Verbatim
934
935Channel uwaterloo
936Master :uwaterloo-remote:
937Slave :uwaterloo-local:
938Patterns * !dovecot*
939Create Both
940SyncState *
941#+end_src
942
943*** mbsync.service
944:PROPERTIES:
945:header-args+: :tangle ~/.config/systemd/user/mbsync.service
946:END:
947
948#+begin_src conf :tangle no
949[Unit]
950Description=mbsync service
951
952[Service]
953Type=oneshot
954ExecStart=/usr/bin/mbsync -Va
955StandardOutput=syslog
956StandardError=syslog
957#+end_src
958
959*** mbsync.timer
960:PROPERTIES:
961:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
962:END:
963
964#+begin_src conf :tangle no
965[Unit]
966Description=mbsync timer
967
968[Timer]
969OnCalendar=*:0/15
970Persistent=true
971Unit=mbsync.service
972
973[Install]
974WantedBy=timers.target
975#+end_src
976
59027673
AB
977** mpd
978:PROPERTIES:
979:header-args+: :tangle ~/.config/mpd/mpd.conf
980:END:
981
982#+begin_src conf
983# An example configuration file for MPD.
984# Read the user manual for documentation: http://www.musicpd.org/doc/user/
985
986
987# Files and directories #######################################################
988#
989# This setting controls the top directory which MPD will search to discover the
990# available audio files and add them to the daemon's online database. This
991# setting defaults to the XDG directory, otherwise the music directory will be
992# be disabled and audio files will only be accepted over ipc socket (using
993# file:// protocol) or streaming files over an accepted protocol.
994#
995music_directory "~/usr/music"
996#
997# This setting sets the MPD internal playlist directory. The purpose of this
998# directory is storage for playlists created by MPD. The server will use
999# playlist files not created by the server but only if they are in the MPD
1000# format. This setting defaults to playlist saving being disabled.
1001#
1002playlist_directory "~/.mpd/playlists"
1003#
1004# This setting sets the location of the MPD database. This file is used to
1005# load the database at server start up and store the database while the
1006# server is not up. This setting defaults to disabled which will allow
1007# MPD to accept files over ipc socket (using file:// protocol) or streaming
1008# files over an accepted protocol.
1009#
1010db_file "~/.mpd/database"
1011#
1012# These settings are the locations for the daemon log files for the daemon.
1013# These logs are great for troubleshooting, depending on your log_level
1014# settings.
1015#
1016# The special value "syslog" makes MPD use the local syslog daemon. This
1017# setting defaults to logging to syslog, otherwise logging is disabled.
1018#
1019log_file "~/.mpd/log"
1020#
1021# This setting sets the location of the file which stores the process ID
1022# for use of mpd --kill and some init scripts. This setting is disabled by
1023# default and the pid file will not be stored.
1024#
1025pid_file "~/.mpd/pid"
1026#
1027# This setting sets the location of the file which contains information about
1028# most variables to get MPD back into the same general shape it was in before
1029# it was brought down. This setting is disabled by default and the server
1030# state will be reset on server start up.
1031#
1032state_file "~/.mpd/state"
1033#
1034# The location of the sticker database. This is a database which
1035# manages dynamic information attached to songs.
1036#
1037sticker_file "~/.mpd/sticker.sql"
1038#
1039###############################################################################
1040
1041
1042# General music daemon options ################################################
1043#
1044# This setting specifies the user that MPD will run as. MPD should never run as
1045# root and you may use this setting to make MPD change its user ID after
1046# initialization. This setting is disabled by default and MPD is run as the
1047# current user.
1048#
1049#user "nobody"
1050#
1051# This setting specifies the group that MPD will run as. If not specified
1052# primary group of user specified with "user" setting will be used (if set).
1053# This is useful if MPD needs to be a member of group such as "audio" to
1054# have permission to use sound card.
1055#
1056#group "nogroup"
1057#
1058# This setting sets the address for the daemon to listen on. Careful attention
1059# should be paid if this is assigned to anything other then the default, any.
1060# This setting can deny access to control of the daemon. Not effective if
1061# systemd socket activiation is in use.
1062#
1063# For network
1064#bind_to_address "any"
1065#
1066# And for Unix Socket
1067#bind_to_address "~/.mpd/socket"
1068#
1069# This setting is the TCP port that is desired for the daemon to get assigned
1070# to.
1071#
1072#port "6600"
1073#
1074# This setting controls the type of information which is logged. Available
1075# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1076# argument is recommended for troubleshooting, though can quickly stretch
1077# available resources on limited hardware storage.
1078#
1079#log_level "default"
1080#
1081# If you have a problem with your MP3s ending abruptly it is recommended that
1082# you set this argument to "no" to attempt to fix the problem. If this solves
1083# the problem, it is highly recommended to fix the MP3 files with vbrfix
1084# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1085# point gapless MP3 playback can be enabled.
1086#
1087#gapless_mp3_playback "yes"
1088#
1089# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1090# of starting playback after startup.
1091#
1092#restore_paused "no"
1093#
1094# This setting enables MPD to create playlists in a format usable by other
1095# music players.
1096#
1097#save_absolute_paths_in_playlists "no"
1098#
1099# This setting defines a list of tag types that will be extracted during the
1100# audio file discovery process. The complete list of possible values can be
1101# found in the user manual.
1102#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1103#
1104# This setting enables automatic update of MPD's database when files in
1105# music_directory are changed.
1106#
1107#auto_update "yes"
1108#
1109# Limit the depth of the directories being watched, 0 means only watch
1110# the music directory itself. There is no limit by default.
1111#
1112#auto_update_depth "3"
1113#
1114###############################################################################
1115
1116
1117# Symbolic link behavior ######################################################
1118#
1119# If this setting is set to "yes", MPD will discover audio files by following
1120# symbolic links outside of the configured music_directory.
1121#
1122#follow_outside_symlinks "yes"
1123#
1124# If this setting is set to "yes", MPD will discover audio files by following
1125# symbolic links inside of the configured music_directory.
1126#
1127#follow_inside_symlinks "yes"
1128#
1129###############################################################################
1130
1131
1132# Zeroconf / Avahi Service Discovery ##########################################
1133#
1134# If this setting is set to "yes", service information will be published with
1135# Zeroconf / Avahi.
1136#
1137#zeroconf_enabled "yes"
1138#
1139# The argument to this setting will be the Zeroconf / Avahi unique name for
1140# this MPD server on the network.
1141#
1142#zeroconf_name "Music Player"
1143#
1144###############################################################################
1145
1146
1147# Permissions #################################################################
1148#
1149# If this setting is set, MPD will require password authorization. The password
1150# setting can be specified multiple times for different password profiles.
1151#
1152#password "password@read,add,control,admin"
1153#
1154# This setting specifies the permissions a user has who has not yet logged in.
1155#
1156#default_permissions "read,add,control,admin"
1157#
1158###############################################################################
1159
1160
1161# Database #######################################################################
1162#
1163
1164#database {
1165# plugin "proxy"
1166# host "other.mpd.host"
1167# port "6600"
1168#}
1169
1170# Input #######################################################################
1171#
1172
1173input {
1174 plugin "curl"
1175# proxy "proxy.isp.com:8080"
1176# proxy_user "user"
1177# proxy_password "password"
1178}
1179
1180#
1181###############################################################################
1182
1183# Audio Output ################################################################
1184#
1185
1186audio_output {
1187 type "pulse"
1188 name "pulse audio"
1189}
1190
1191audio_output {
1192 type "fifo"
1193 name "my_fifo"
1194 path "/tmp/mpd.fifo"
1195 format "44100:16:2"
1196}
1197
1198# MPD supports various audio output types, as well as playing through multiple
1199# audio outputs at the same time, through multiple audio_output settings
1200# blocks. Setting this block is optional, though the server will only attempt
1201# autodetection for one sound card.
1202#
1203# An example of an ALSA output:
1204#
1205#audio_output {
1206# type "alsa"
1207# name "My ALSA Device"
1208## device "hw:0,0" # optional
1209## mixer_type "hardware" # optional
1210## mixer_device "default" # optional
1211## mixer_control "PCM" # optional
1212## mixer_index "0" # optional
1213#}
1214#
1215# An example of an OSS output:
1216#
1217#audio_output {
1218# type "oss"
1219# name "My OSS Device"
1220## device "/dev/dsp" # optional
1221## mixer_type "hardware" # optional
1222## mixer_device "/dev/mixer" # optional
1223## mixer_control "PCM" # optional
1224#}
1225#
1226# An example of a shout output (for streaming to Icecast):
1227#
1228#audio_output {
1229# type "shout"
1230# encoder "vorbis" # optional
1231# name "My Shout Stream"
1232# host "localhost"
1233# port "8000"
1234# mount "/mpd.ogg"
1235# password "hackme"
1236# quality "5.0"
1237# bitrate "128"
1238# format "44100:16:1"
1239## protocol "icecast2" # optional
1240## user "source" # optional
1241## description "My Stream Description" # optional
1242## url "http://example.com" # optional
1243## genre "jazz" # optional
1244## public "no" # optional
1245## timeout "2" # optional
1246## mixer_type "software" # optional
1247#}
1248#
1249# An example of a recorder output:
1250#
1251#audio_output {
1252# type "recorder"
1253# name "My recorder"
1254# encoder "vorbis" # optional, vorbis or lame
1255# path "/var/lib/mpd/recorder/mpd.ogg"
1256## quality "5.0" # do not define if bitrate is defined
1257# bitrate "128" # do not define if quality is defined
1258# format "44100:16:1"
1259#}
1260#
1261# An example of a httpd output (built-in HTTP streaming server):
1262#
1263#audio_output {
1264# type "httpd"
1265# name "My HTTP Stream"
1266# encoder "vorbis" # optional, vorbis or lame
1267# port "8000"
1268# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1269## quality "5.0" # do not define if bitrate is defined
1270# bitrate "128" # do not define if quality is defined
1271# format "44100:16:1"
1272# max_clients "0" # optional 0=no limit
1273#}
1274#
1275# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1276#
1277#audio_output {
1278# type "pulse"
1279# name "My Pulse Output"
1280## server "remote_server" # optional
1281## sink "remote_server_sink" # optional
1282#}
1283#
1284# An example of a winmm output (Windows multimedia API).
1285#
1286#audio_output {
1287# type "winmm"
1288# name "My WinMM output"
1289## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1290# or
1291## device "0" # optional
1292## mixer_type "hardware" # optional
1293#}
1294#
1295# An example of an openal output.
1296#
1297#audio_output {
1298# type "openal"
1299# name "My OpenAL output"
1300## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1301#}
1302#
1303# An example of an sndio output.
1304#
1305#audio_output {
1306# type "sndio"
1307# name "sndio output"
1308# mixer_type "software"
1309#}
1310#
1311# An example of an OS X output:
1312#
1313#audio_output {
1314# type "osx"
1315# name "My OS X Device"
1316## device "Built-in Output" # optional
1317## channel_map "-1,-1,0,1" # optional
1318#}
1319#
1320## Example "pipe" output:
1321#
1322#audio_output {
1323# type "pipe"
1324# name "my pipe"
1325# command "aplay -f cd 2>/dev/null"
1326## Or if you're want to use AudioCompress
1327# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1328## Or to send raw PCM stream through PCM:
1329# command "nc example.org 8765"
1330# format "44100:16:2"
1331#}
1332#
1333## An example of a null output (for no audio output):
1334#
1335#audio_output {
1336# type "null"
1337# name "My Null Output"
1338# mixer_type "none" # optional
1339#}
1340#
1341###############################################################################
1342
1343
1344# Normalization automatic volume adjustments ##################################
1345#
1346# This setting specifies the type of ReplayGain to use. This setting can have
1347# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1348# chooses between "track" and "album" depending on the current state of
1349# random playback. If random playback is enabled then "track" mode is used.
1350# See <http://www.replaygain.org> for more details about ReplayGain.
1351# This setting is off by default.
1352#
1353#replaygain "album"
1354#
1355# This setting sets the pre-amp used for files that have ReplayGain tags. By
1356# default this setting is disabled.
1357#
1358#replaygain_preamp "0"
1359#
1360# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1361# By default this setting is disabled.
1362#
1363#replaygain_missing_preamp "0"
1364#
1365# This setting enables or disables ReplayGain limiting.
1366# MPD calculates actual amplification based on the ReplayGain tags
1367# and replaygain_preamp / replaygain_missing_preamp setting.
1368# If replaygain_limit is enabled MPD will never amplify audio signal
1369# above its original level. If replaygain_limit is disabled such amplification
1370# might occur. By default this setting is enabled.
1371#
1372#replaygain_limit "yes"
1373#
1374# This setting enables on-the-fly normalization volume adjustment. This will
1375# result in the volume of all playing audio to be adjusted so the output has
1376# equal "loudness". This setting is disabled by default.
1377#
1378#volume_normalization "no"
1379#
1380###############################################################################
1381
1382# Character Encoding ##########################################################
1383#
1384# If file or directory names do not display correctly for your locale then you
1385# may need to modify this setting.
1386#
1387#filesystem_charset "UTF-8"
1388#
1389###############################################################################
1390#+end_src
1391
1392** msmtp
1393:PROPERTIES:
1394:header-args+: :tangle ~/.msmtprc
1395:END:
1396
1397#+begin_src conf
1398# Set default values for all following accounts.
1399defaults
1400port 587
1401tls on
1402auth on
1403#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1404logfile ~/.msmtp.log
1405
1406# aminb
1407account aminb
1408host nix.aminb.org
2a1be6b4 1409tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
59027673
AB
1410tls_starttls on
1411from amin@aminb.org
1412user amin@aminb.org
1413passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1414
1415# gnu
1416account gnu
1417host fencepost.gnu.org
1e55aaa3
AB
1418# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1419tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
59027673
AB
1420tls_starttls on
1421from aminb@gnu.org
1422user aminb
1423passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1424
1425# uwaterloo
1426account uwaterloo
1427host connect.uwaterloo.ca
1428tls_starttls on
1429from abandali@uwaterloo.ca
1430user abandali
1431passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1432tls_trust_file /etc/ssl/certs/ca-certificates.crt
1433
1434# uwaterloo (friendly address)
1435account uwaterloo-friendly : uwaterloo
1436from amin.bandali@uwaterloo.ca
1437
1438# Set a default account
1439account default : aminb
1440#+end_src
1441
1442** ncmpcpp
1443
1444*** config
1445:PROPERTIES:
1446:header-args+: :tangle ~/.ncmpcpp/config
1447:END:
1448
1449#+begin_src conf :tangle no
1450##############################################################
1451## This is the example configuration file. Copy it to ##
1452## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1453## and set up your preferences. ##
1454##############################################################
1455#
1456##### directories ######
1457##
1458## Directory for storing ncmpcpp related files.
1459## Changing it is useful if you want to store
1460## everything somewhere else and provide command
1461## line setting for alternative location to config
1462## file which defines that while launching ncmpcpp.
1463##
1464#
1465ncmpcpp_directory = ~/.ncmpcpp
1466#
1467##
1468## Directory for storing downloaded lyrics. It
1469## defaults to ~/.lyrics since other MPD clients
1470## (eg. ncmpc) also use that location.
1471##
1472#
1473#lyrics_directory = ~/.lyrics
1474#
1475##### connection settings #####
1476#
1477#mpd_host = localhost
1478#
1479#mpd_port = 6600
1480#
1481#mpd_connection_timeout = 5
1482#
1483## Needed for tag editor and file operations to work.
1484##
1485mpd_music_dir = ~/usr/music
1486#
1487#mpd_crossfade_time = 5
1488#
1489##### music visualizer #####
1490##
1491## Note: In order to make music visualizer work you'll
1492## need to use mpd fifo output, whose format parameter
1493## has to be set to 44100:16:1 for mono visualization
1494## or 44100:16:2 for stereo visualization. Example
1495## configuration (it has to be put into mpd.conf):
1496##
1497## audio_output {
1498## type "fifo"
1499## name "Visualizer feed"
1500## path "/tmp/mpd.fifo"
1501## format "44100:16:2"
1502## }
1503##
1504#
1505visualizer_fifo_path = /tmp/mpd.fifo
1506#
1507##
1508## Note: Below parameter is needed for ncmpcpp
1509## to determine which output provides data for
1510## visualizer and thus allow syncing between
1511## visualization and sound as currently there
1512## are some problems with it.
1513##
1514#
1515visualizer_output_name = my fifo
1516#
1517##
1518## If you set format to 44100:16:2, make it 'yes'.
1519##
1520visualizer_in_stereo = yes
1521#
1522##
1523## Multiply received samples by given value. Very
1524## useful for proper visualization of quiet music.
1525##
1526#visualizer_sample_multiplier = 1
1527#
1528##
1529## Note: Below parameter defines how often ncmpcpp
1530## has to "synchronize" visualizer and audio outputs.
1531## 30 seconds is optimal value, but if you experience
1532## synchronization problems, set it to lower value.
1533## Keep in mind that sane values start with >=10.
1534##
1535#
1536visualizer_sync_interval = 30
1537#
1538##
1539## Note: To enable spectrum frequency visualization
1540## you need to compile ncmpcpp with fftw3 support.
1541##
1542#
1543## Available values: spectrum, wave, wave_filled, ellipse.
1544##
1545visualizer_type = spectrum
1546#
1547#visualizer_look = ●▮
1548visualizer_look = "●•"
1549#
1550#visualizer_color = blue, cyan, green, yellow, magenta, red
1551#
1552## Alternative subset of 256 colors for terminals that support it.
1553##
1554#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1555#
1556##### system encoding #####
1557##
1558## ncmpcpp should detect your charset encoding
1559## but if it failed to do so, you can specify
1560## charset encoding you are using here.
1561##
1562## Note: You can see whether your ncmpcpp build
1563## supports charset detection by checking output
1564## of `ncmpcpp --version`.
1565##
1566## Note: Since MPD uses UTF-8 by default, setting
1567## this option makes sense only if your encoding
1568## is different.
1569##
1570#
1571#system_encoding = ""
1572#
1573##### delays #####
1574#
1575## Time of inactivity (in seconds) after playlist
1576## highlighting will be disabled (0 = always on).
1577##
1578#playlist_disable_highlight_delay = 5
1579#
1580## Defines how long messages are supposed to be visible.
1581##
1582#message_delay_time = 5
1583#
1584##### song format #####
1585##
1586## For a song format you can use:
1587##
1588## %l - length
1589## %f - filename
1590## %D - directory
1591## %a - artist
1592## %A - album artist
1593## %t - title
1594## %b - album
1595## %y - date
1596## %n - track number (01/12 -> 01)
1597## %N - full track info (01/12 -> 01/12)
1598## %g - genre
1599## %c - composer
1600## %p - performer
1601## %d - disc
1602## %C - comment
1603## %P - priority
1604## $R - begin right alignment
1605##
1606## If you want to make sure that a part of the format is displayed
1607## only when certain tags are present, you can archieve it by
1608## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1609## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1610## It is also possible to define a list of alternatives by providing
1611## several groups and separating them with '|', e.g. '{%t}|{%f}'
1612## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1613## present.
1614##
1615## Note: If you want to set limit on maximal length of a tag, just
1616## put the appropriate number between % and character that defines
1617## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1618##
1619## In addition, formats support markers used for text attributes.
1620## They are followed by character '$'. After that you can put:
1621##
1622## - 0 - default window color (discards all other colors)
1623## - 1 - black
1624## - 2 - red
1625## - 3 - green
1626## - 4 - yellow
1627## - 5 - blue
1628## - 6 - magenta
1629## - 7 - cyan
1630## - 8 - white
1631## - 9 - end of current color
1632## - b - bold text
1633## - u - underline text
1634## - r - reverse colors
1635## - a - use alternative character set
1636##
1637## If you don't want to use a non-color attribute anymore, just put it
1638## again, but this time insert character '/' between '$' and attribute
1639## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1640## or filename with reversed colors.
1641##
1642## If you want to use 256 colors and/or background colors in formats
1643## (the naming scheme is described below in section about color
1644## definitions), it can be done with the syntax $(COLOR), e.g. to set
1645## the artist tag to one of the non-standard colors and make it have
1646## yellow background, you need to write $(197_yellow)%a$(end). Note
1647## that for standard colors this is interchangable with attributes
1648## listed above.
1649##
1650## Note: colors can be nested.
1651##
1652#
1653#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1654#
1655#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1656#
1657#song_library_format = {%n - }{%t}|{%f}
1658#
1659#
1660#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1661#
1662#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1663#
1664#now_playing_prefix = $b
1665#
1666#now_playing_suffix = $/b
1667#
1668#browser_playlist_prefix = "$2playlist$9 "
1669#
1670#selected_item_prefix = $6
1671#
1672#selected_item_suffix = $9
1673#
1674#modified_item_prefix = $3> $9
1675#
1676##
1677## Note: attributes are not supported for the following variables.
1678##
1679#song_window_title_format = {%a - }{%t}|{%f}
1680##
1681## Note: Below variables are used for sorting songs in browser.
1682## The sort mode determines how songs are sorted, and can be used
1683## in combination with a sort format to specify a custom sorting format.
1684## Available values for browser_sort_mode are "name", "mtime", "format"
1685## and "noop".
1686##
1687#
1688#browser_sort_mode = name
1689#
1690#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1691#
1692##### columns settings #####
1693##
1694## syntax of song columns list format is "column column etc."
1695##
1696## - syntax for each column is:
1697##
1698## (width of the column)[color of the column]{displayed tag}
1699##
1700## Note: Width is by default in %, if you want a column to
1701## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1702## will be the column that take 10% of screen (so the real width
1703## will depend on actual screen size), whereas (10f)[white]{a}
1704## will take 10 terminal cells, no matter how wide the screen is.
1705##
1706## - color is optional (if you want the default one,
1707## leave the field empty).
1708##
1709## Note: You can give a column additional attributes by putting appropriate
1710## character after displayed tag character. Available attributes are:
1711##
1712## - r - column will be right aligned
1713## - E - if tag is empty, empty tag marker won't be displayed
1714##
1715## You can also:
1716##
1717## - give a column custom name by putting it after attributes,
1718## separated with character ':', e.g. {lr:Length} gives you
1719## right aligned column of lengths named "Length".
1720##
1721## - define sequence of tags, that have to be displayed in case
1722## predecessor is empty in a way similar to the one in classic
1723## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1724## creates column named "Owner" that tries to display artist
1725## tag and then composer and performer if previous ones are
1726## not available.
1727##
1728#
1729#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1730#
1731##### various settings #####
1732#
1733##
1734## Note: Custom command that will be executed each
1735## time song changes. Useful for notifications etc.
1736##
1737#execute_on_song_change = ""
1738#
1739#playlist_show_mpd_host = no
1740#
1741#playlist_show_remaining_time = no
1742#
1743#playlist_shorten_total_times = no
1744#
1745#playlist_separate_albums = no
1746#
1747##
1748## Note: Possible display modes: classic, columns.
1749##
1750#playlist_display_mode = columns
1751#
1752#browser_display_mode = classic
1753#
1754#search_engine_display_mode = classic
1755#
1756#playlist_editor_display_mode = classic
1757#
1758#discard_colors_if_item_is_selected = yes
1759#
1760#incremental_seeking = yes
1761#
1762#seek_time = 1
1763#
1764#volume_change_step = 2
1765#
1766#autocenter_mode = no
1767#
1768#centered_cursor = no
1769#
1770##
1771## Note: You can specify third character which will
1772## be used to build 'empty' part of progressbar.
1773##
1774#progressbar_look = =>
1775progressbar_look = "─╼╶"
1776#progressbar_look = "─⊙╶"
1777#
1778#progressbar_boldness = yes
1779#
1780## Available values: database, playlist.
1781##
1782#default_place_to_search_in = database
1783#
1784## Available values: classic, alternative.
1785##
1786#user_interface = classic
1787#
1788#data_fetching_delay = yes
1789#
1790## Available values: artist, album_artist, date, genre, composer, performer.
1791##
1792#media_library_primary_tag = artist
1793#
1794## Available values: wrapped, normal.
1795##
1796#default_find_mode = wrapped
1797#
1798#default_tag_editor_pattern = %n - %t
1799#
1800#header_visibility = yes
1801#
1802#statusbar_visibility = yes
1803#
1804#titles_visibility = yes
1805#
1806#header_text_scrolling = yes
1807#
1808#cyclic_scrolling = no
1809#
1810#lines_scrolled = 2
1811#
1812#follow_now_playing_lyrics = no
1813#
1814#fetch_lyrics_for_current_song_in_background = no
1815#
1816#store_lyrics_in_song_dir = no
1817#
1818#generate_win32_compatible_filenames = yes
1819#
1820#allow_for_physical_item_deletion = no
1821#
1822##
1823## Note: If you set this variable, ncmpcpp will try to
1824## get info from last.fm in language you set and if it
1825## fails, it will fall back to english. Otherwise it will
1826## use english the first time.
1827##
1828## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1829##
1830#lastfm_preferred_language = en
1831#
1832#show_hidden_files_in_local_browser = no
1833#
1834##
1835## How shall screen switcher work?
1836##
1837## - "previous" - switch between the current and previous screen.
1838## - "screen1,...,screenN" - switch between given sequence of screens.
1839##
1840## Screens available for use: help, playlist, browser, search_engine,
1841## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1842##
1843#screen_switcher_mode = playlist, browser
1844#
1845##
1846## Note: You can define startup screen
1847## by choosing screen from the list above.
1848##
1849#startup_screen = playlist
1850#
1851##
1852## Note: You can define startup slave screen
1853## by choosing screen from the list above or
1854## an empty value for no slave screen.
1855##
1856#startup_slave_screen = ""
1857#
1858#startup_slave_screen_focus = no
1859#
1860##
1861## Default width of locked screen (in %).
1862## Acceptable values are from 20 to 80.
1863##
1864#
1865#locked_screen_width_part = 50
1866#
1867#ask_for_locked_screen_width_part = yes
1868#
1869#jump_to_now_playing_song_at_start = yes
1870#
1871#ask_before_clearing_playlists = yes
1872#
1873#clock_display_seconds = no
1874#
1875#display_volume_level = yes
1876#
1877#display_bitrate = no
1878#
1879#display_remaining_time = no
1880#
1881## Available values: none, basic, extended, perl.
1882##
1883#regular_expressions = perl
1884#
1885##
1886## Note: If below is enabled, ncmpcpp will ignore leading
1887## "The" word while sorting items in browser, tags in
1888## media library, etc.
1889##
1890#ignore_leading_the = no
1891#
1892#block_search_constraints_change_if_items_found = yes
1893#
1894#mouse_support = yes
1895#
1896#mouse_list_scroll_whole_page = yes
1897#
1898#empty_tag_marker = <empty>
1899#
1900#tags_separator = " | "
1901#
1902#tag_editor_extended_numeration = no
1903#
1904#media_library_sort_by_mtime = no
1905#
1906#enable_window_title = yes
1907#
1908##
1909## Note: You can choose default search mode for search
1910## engine. Available modes are:
1911##
1912## - 1 - use mpd built-in searching (no regexes, pattern matching)
1913## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1914## but if your mpd is on a remote machine, downloading big database
1915## to process it can take a while
1916## - 3 - match only exact values (this mode uses mpd function for searching
1917## in database and local one for searching in current playlist)
1918##
1919#
1920#search_engine_default_search_mode = 1
1921#
1922#external_editor = nano
1923#
1924## Note: set to yes if external editor is a console application.
1925##
1926#use_console_editor = yes
1927#
1928##### colors definitions #####
1929##
1930## It is possible to set a background color by setting a color
1931## value "<foreground>_<background>", e.g. red_black will set
1932## foregound color to red and background color to black.
1933##
1934## In addition, for terminals that support 256 colors it
1935## is possible to set one of them by using a number in range
1936## [1, 256] instead of color name, e.g. numerical value
1937## corresponding to red_black is 2_1. To find out if the
1938## terminal supports 256 colors, run ncmpcpp and check out
1939## the bottom of the help screen for list of available colors
1940## and their numerical values.
1941##
1942## Note: due to technical limitations of ncurses, if 256 colors
1943## are used, it is possible to either use only the colors with
1944## default background color, or all pairs from 1_1 up to 254_127,
1945## depending on the ncurses version used.
1946##
1947#
1948#colors_enabled = yes
1949#
1950#empty_tag_color = cyan
1951#
1952#header_window_color = default
1953#
1954#volume_color = default
1955#
1956#state_line_color = default
1957#
1958#state_flags_color = default
1959#
1960#main_window_color = yellow
1961#
1962#color1 = white
1963#
1964#color2 = green
1965#
1966#main_window_highlight_color = yellow
1967#
1968#progressbar_color = black
1969#
1970#progressbar_elapsed_color = green
1971#
1972#statusbar_color = default
1973#
1974#alternative_ui_separator_color = black
1975#
1976#active_column_color = red
1977#
1978#window_border_color = green
1979#
1980#active_window_border = red
1981#
1982#+end_src
1983
1984*** bindings
1985:PROPERTIES:
1986:header-args+: :tangle ~/.ncmpcpp/bindings
1987:END:
1988
1989#+begin_src conf :tangle no
1990def_key "j"
1991 scroll_down
1992def_key "k"
1993 scroll_up
1994
1995def_key "ctrl-u"
1996 page_up
1997def_key "ctrl-d"
1998 page_down
1999
2000def_key "h"
2001 previous_column
2002def_key "l"
2003 next_column
2004
2005def_key "."
2006 show_lyrics
2007
2008def_key "n"
2009 next_found_item
2010def_key "N"
2011 previous_found_item
2012
2013def_key "J"
2014 move_sort_order_down
2015def_key "K"
2016 move_sort_order_up
2017#+end_src
2018
25869427
AB
2019** notmuch
2020
2021*** notmuch-config
2022:PROPERTIES:
2023:header-args+: :tangle ~/.notmuch-config
2024:END:
2025
2026#+begin_src conf
2027# .notmuch-config - Configuration file for the notmuch mail system
2028#
2029# For more information about notmuch, see https://notmuchmail.org
2030
2031# Database configuration
2032#
2033# The only value supported here is 'path' which should be the top-level
2034# directory where your mail currently exists and to where mail will be
2035# delivered in the future. Files should be individual email messages.
2036# Notmuch will store its database within a sub-directory of the path
2037# configured here named ".notmuch".
2038#
2039[database]
2040path=/home/amin/mail
2041
2042# User configuration
2043#
2044# Here is where you can let notmuch know how you would like to be
2045# addressed. Valid settings are
2046#
2047# name Your full name.
2048# primary_email Your primary email address.
2049# other_email A list (separated by ';') of other email addresses
2050# at which you receive email.
2051#
2052# Notmuch will use the various email addresses configured here when
2053# formatting replies. It will avoid including your own addresses in the
2054# recipient list of replies, and will set the From address based on the
2055# address to which the original email was addressed.
2056#
2057[user]
2058name=Amin Bandali
2059primary_email=amin@aminb.org
2a1be6b4 2060other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
25869427
AB
2061
2062# Configuration for "notmuch new"
2063#
2064# The following options are supported here:
2065#
2066# tags A list (separated by ';') of the tags that will be
2067# added to all messages incorporated by "notmuch new".
2068#
2069# ignore A list (separated by ';') of file and directory names
2070# that will not be searched for messages by "notmuch new".
2071#
2072# NOTE: *Every* file/directory that goes by one of those
2073# names will be ignored, independent of its depth/location
2074# in the mail store.
2075#
2076[new]
2077tags=new;
2078#tags=unread;inbox;
18faca55 2079ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
25869427
AB
2080
2081# Search configuration
2082#
2083# The following option is supported here:
2084#
2085# exclude_tags
2086# A ;-separated list of tags that will be excluded from
2087# search results by default. Using an excluded tag in a
2088# query will override that exclusion.
2089#
2090[search]
2091exclude_tags=deleted;spam;
2092
2093# Maildir compatibility configuration
2094#
2095# The following option is supported here:
2096#
2097# synchronize_flags Valid values are true and false.
2098#
2099# If true, then the following maildir flags (in message filenames)
2100# will be synchronized with the corresponding notmuch tags:
2101#
2102# Flag Tag
2103# ---- -------
2104# D draft
2105# F flagged
2106# P passed
2107# R replied
2108# S unread (added when 'S' flag is not present)
2109#
2110# The "notmuch new" command will notice flag changes in filenames
2111# and update tags, while the "notmuch tag" and "notmuch restore"
2112# commands will notice tag changes and update flags in filenames
2113#
2114[maildir]
2115synchronize_flags=true
2116
2117# Cryptography related configuration
2118#
2119# The following option is supported here:
2120#
2121# gpg_path
2122# binary name or full path to invoke gpg.
2123#
2124[crypto]
2125gpg_path=gpg
2126#+end_src
2127
18faca55
AB
2128*** pre-new hook
2129:PROPERTIES:
2130:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2131:END:
2132
2133#+begin_src sh
2134touch /tmp/gnusieve.log
2135sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2136 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2137#+end_src
2138
25869427
AB
2139*** post-new hook
2140:PROPERTIES:
2141:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2142:END:
2143
2144#+begin_src sh
18faca55
AB
2145# apply sent tag to messages sent by me
2146notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca
2147
2148# initial tagging
53960d74
AB
2149notmuch tag -latest -- tag:latest
2150notmuch tag +inbox +unread +latest -new -- tag:new
25869427 2151
378b4afa 2152
25869427 2153# apply tags to lists
378b4afa
AB
2154
2155# <aminb>
2156notmuch tag -inbox +lists/~sircmpwn/srht-admins -- folder:amin/lists/~sircmpwn/srht-admins
2157notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
2158notmuch tag -inbox +lists/~sircmpwn/srht-dev -- folder:amin/lists/~sircmpwn/srht-dev
2159notmuch tag -inbox +lists/~sircmpwn/srht-discuss -- folder:amin/lists/~sircmpwn/srht-discuss
2160
18faca55 2161notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
378b4afa 2162notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
ddb0b1d4
AB
2163
2164notmuch tag -inbox +pay -- folder:amin/pay
378b4afa
AB
2165# </aminb>
2166
2167# <uw>
ddb0b1d4
AB
2168notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2169notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
378b4afa
AB
2170
2171notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2172notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2173notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2174notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2175notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2176# </uw>
2177
2178# <gnu>
2179notmuch tag -inbox +lists/emacs-devel -- folder:gnu/l/emacs-devel
2180notmuch tag -inbox +lists/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2181notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2182notmuch tag -inbox +lists/fencepost-users -- folder:gnu/l/fencepost-users
2183notmuch tag -inbox +lists/guix-devel -- folder:gnu/l/guix-devel
2184notmuch tag -inbox +lists/guile-devel -- folder:gnu/l/guile-devel
2185notmuch tag -inbox +lists/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2186notmuch tag -inbox +lists/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2187notmuch tag -inbox +lists/www-commits -- folder:gnu/l/www-commits
2188notmuch tag -inbox +lists/www-discuss -- folder:gnu/l/www-discuss
2189notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2190
2191notmuch tag -inbox +lists/deepspec -- folder:gnu/l/deepspec
2192notmuch tag -inbox +lists/haskell-cafe -- folder:gnu/l/haskell-cafe
2193notmuch tag -inbox +lists/haskell-art -- folder:gnu/l/haskell-art
2194notmuch tag -inbox +lists/notmuch -- folder:gnu/l/notmuch
ddb0b1d4 2195# </gnu>
25869427
AB
2196#+end_src
2197
2198*** notmuch.service
2199:PROPERTIES:
2200:header-args+: :tangle ~/.config/systemd/user/notmuch.service
2201:END:
2202
2203#+begin_src conf :tangle no
2204[Unit]
2205Description=notmuch service
2206
2207[Service]
2208Type=oneshot
2209ExecStart=/usr/bin/notmuch new
2210StandardOutput=syslog
2211StandardError=syslog
2212#+end_src
2213
2214*** notmuch.timer
2215:PROPERTIES:
2216:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2217:END:
2218
2219#+begin_src conf :tangle no
2220[Unit]
2221Description=notmuch timer
2222
2223[Timer]
2224OnCalendar=*:0/5
2225Persistent=true
2226Unit=notmuch.service
2227
2228[Install]
2229WantedBy=timers.target
2230#+end_src
2231
2232** offlineimap
2233
2234*** offlineimaprc
2235:PROPERTIES:
2236:header-args+: :tangle ~/.offlineimaprc
2237:END:
2238
2239#+begin_src conf :tangle no
2240[general]
2241pythonfile = ~/.offlineimap.py
2242accounts = Gmail, aminb
2243maxsyncaccounts = 3
2244
2245[Account Gmail]
2246localrepository = GmailL
2247remoterepository = GmailR
2248
2249[Account aminb]
2250localrepository = aminbL
2251remoterepository = aminbR
2252
2253[Repository GmailL]
2254type = Maildir
2255localfolders = ~/Maildir/Gmail
2256
2257[Repository GmailR]
2258type = IMAP
2259remotehost = imap.gmail.com
2260remoteusereval = mailuser("gmail")
2261remotepasseval = mailpasswd("gmail")
2262sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2263ssl = yes
2264folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2265maxconnections = 1
2266realdelete = no
2267
2268[Repository aminbL]
2269type = Maildir
2270localfolders = ~/Maildir/aminb
2271
2272[Repository aminbR]
2273type = IMAP
2274remotehost = mail.aminb.org
2275remoteusereval = mailuser("aminb")
2276remotepasseval = mailpasswd("aminb")
2277sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2278ssl = yes
2279folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2280maxconnections = 1
2281realdelete = no
2282#+end_src
2283
2284*** offlineimap.py
2285:PROPERTIES:
2286:header-args+: :tangle ~/.offlineimap.py
2287:END:
2288
2289#+begin_src python :tangle no
2290import os
2291import subprocess
2292
2293def mailpasswd(acct):
2294 acct = os.path.basename(acct)
2295 path = "/home/amin/.passwd/%s.gpg" % acct
2296 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2297 try:
2298 return subprocess.check_output(args).strip()
2299 except subprocess.CalledProcessError:
2300 return ""
2301
2302def mailuser(acct):
2303 acct = os.path.basename(acct)
2304 path = "/home/amin/.passwd/%s" % acct
2305 args = ["cat", path]
2306 try:
2307 return subprocess.check_output(args).strip()
2308 except subprocess.CalledProcessError:
2309 return ""
2310
2311def prime_gpg_agent():
2312 ret = False
2313 i = 1
2314 while not ret:
2315 ret = (mailpasswd("prime") == "prime")
2316 if i > 2:
2317 from offlineimap.ui import getglobalui
2318 sys.stderr.write("Error reading in passwords. Terminating.\n")
2319 getglobalui().terminate()
2320 i += 1
2321 return ret
2322
2323prime_gpg_agent()
2324#+end_src
2325
8e15d300
AB
2326** pigeonhole
2327*** gnu.sieve
2328:PROPERTIES:
2329:header-args+: :tangle ~/sieve/gnu.sieve :comments none
2330:END:
2331
2332#+begin_src conf
2333require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2334
2335if anyof (
2336 address :is "from" "webmasters@gnu.org",
2337 address :is "from" "webmasters-comment@gnu.org") {
2338 fileinto :create "webmasters";
2339 stop;
2340}
2341
2342include :personal "lists";
2343#+end_src
2344
2345*** lists.sieve
2346:PROPERTIES:
2347:header-args+: :tangle ~/sieve/lists.sieve :comments none
2348:END:
2349
2350#+begin_src conf
2351require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2352 "include" ];
2353
2354if anyof (
2355 header :contains "list-id" "<emacs-devel.gnu.org>",
378b4afa
AB
2356 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2357 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2358 header :contains "list-id" "<fencepost-users.gnu.org>",
8e15d300
AB
2359 header :contains "list-id" "<guix-devel.gnu.org>",
2360 header :contains "list-id" "<guile-devel.gnu.org>",
2361 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2362 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2363 header :contains "list-id" "<www-commits.gnu.org>",
2364 header :contains "list-id" "<www-discuss.gnu.org>",
8e15d300
AB
2365 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2366 header :contains "list-id" "<haskell-cafe.haskell.org>",
378b4afa 2367 header :contains "list-id" "<haskell-art.we.lurk.org>",
8e15d300
AB
2368 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2369 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2370 set :lower "listname" "${1}";
2371 fileinto :create "l/${listname}";
2372 }
2373}
2374#+end_src
2375
1656853a
AB
2376** polybar
2377
2378*** config
2379:PROPERTIES:
2380:header-args+: :tangle ~/.config/polybar/config
2381:END:
2382
2383#+begin_src conf :tangle no
2384;=====================================================
2385;
2386; To learn more about how to configure Polybar
2387; go to https://github.com/jaagr/polybar
2388;
2389; The README contains alot of information
2390;
2391;=====================================================
2392
2393[colors]
2394;background = ${xrdb:color0:#222}
2395background = #222
2396background-alt = #444
2397;foreground = ${xrdb:color7:#222}
2398foreground = #eee
2399foreground-alt = #888
2400primary = #ffb52a
2401secondary = #e60053
2402alert = #bd2c40
2403
2404[bar/main]
2405;monitor = ${env:MONITOR:HDMI-1}
2406width = 100%
2407height = 27
2408;offset-x = 1%
2409;offset-y = 1%
2410radius = 3.0
2411fixed-center = true
2412
2413background = ${colors.background}
2414foreground = ${colors.foreground}
2415
2416line-size = 3
2417line-color = #f00
2418
2419border-size = 4
2420border-color = #00000000
2421
2422padding-left = 0
2423padding-right = 2
2424
2425module-margin-left = 2
2426module-margin-right = 2
2427
2428font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2429font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2430font-2 = Wuncon Siji:pixelsize=10;1
2431font-3 = FontAwesome:pixelsize=10;1
2432
2433modules-left = bspwm xwindow
2434modules-center =
2435modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2436
2437tray-position = right
2438tray-padding = 1
2439;tray-transparent = true
2440;tray-background = #0063ff
2441tray-maxsize = 18
2442
2443wm-restack = bspwm
2444
2445;override-redirect = true
2446
2447scroll-up = bspwm-desknext
2448scroll-down = bspwm-deskprev
2449
2450[module/xwindow]
2451type = internal/xwindow
2452label = %title:0:50:...%
2453
2454[module/xkeyboard]
2455type = internal/xkeyboard
2456blacklist-0 = num lock
2457
2458format-prefix = " "
2459format-prefix-foreground = ${colors.foreground-alt}
2460format-prefix-underline = ${colors.secondary}
2461
2462label-layout = %layout%
2463label-layout-underline = ${colors.secondary}
2464
2465label-indicator-padding = 2
2466label-indicator-margin = 1
2467label-indicator-background = ${colors.secondary}
2468label-indicator-underline = ${colors.secondary}
2469
2470[module/filesystem]
2471type = internal/fs
2472interval = 25
2473
2474mount-0 = /
2475
2476label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2477label-unmounted = %mountpoint% not mounted
2478label-unmounted-foreground = ${colors.foreground-alt}
2479
2480[module/bspwm]
2481type = internal/bspwm
2482
2483label-focused = %index%
2484label-focused-background = ${colors.background-alt}
2485label-focused-underline= ${colors.primary}
2486label-focused-padding = 2
2487
2488label-occupied = %index%
2489label-occupied-padding = 2
2490
2491label-urgent = %index%!
2492label-urgent-background = ${colors.alert}
2493label-urgent-padding = 2
2494
2495label-empty = %index%
2496label-empty-foreground = ${colors.foreground-alt}
2497label-empty-padding = 2
2498
2499[module/i3]
2500type = internal/i3
2501format = <label-state> <label-mode>
2502index-sort = true
2503wrapping-scroll = false
2504
2505; Only show workspaces on the same output as the bar
2506;pin-workspaces = true
2507
2508label-mode-padding = 2
2509label-mode-foreground = #000
2510label-mode-background = ${colors.primary}
2511
2512; focused = Active workspace on focused monitor
2513label-focused = %index%
2514label-focused-background = ${module/bspwm.label-focused-background}
2515label-focused-underline = ${module/bspwm.label-focused-underline}
2516label-focused-padding = ${module/bspwm.label-focused-padding}
2517
2518; unfocused = Inactive workspace on any monitor
2519label-unfocused = %index%
2520label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2521
2522; visible = Active workspace on unfocused monitor
2523label-visible = %index%
2524label-visible-background = ${self.label-focused-background}
2525label-visible-underline = ${self.label-focused-underline}
2526label-visible-padding = ${self.label-focused-padding}
2527
2528; urgent = Workspace with urgency hint set
2529label-urgent = %index%
2530label-urgent-background = ${module/bspwm.label-urgent-background}
2531label-urgent-padding = ${module/bspwm.label-urgent-padding}
2532
2533[module/mpd]
2534type = internal/mpd
2535format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2536
2537icon-prev = 
2538icon-stop = 
2539icon-play = 
2540icon-pause = 
2541icon-next = 
2542
2543label-song-maxlen = 25
2544label-song-ellipsis = true
2545
2546[module/xbacklight]
2547type = internal/xbacklight
2548
2549format = <label> <bar>
2550label = BL
2551
2552bar-width = 10
2553bar-indicator = |
2554bar-indicator-foreground = #ff
2555bar-indicator-font = 2
2556bar-fill = ─
2557bar-fill-font = 2
2558bar-fill-foreground = #9f78e1
2559bar-empty = ─
2560bar-empty-font = 2
2561bar-empty-foreground = ${colors.foreground-alt}
2562
2563[module/backlight-acpi]
2564inherit = module/xbacklight
2565type = internal/backlight
2566;card = intel_backlight
2567card = mba6x_backlight
2568
2569[module/cpu]
2570type = internal/cpu
2571interval = 2
2572format-prefix = " "
2573format-prefix-foreground = ${colors.foreground-alt}
2574format-underline = #f90000
2575label = %percentage%%
2576
2577[module/memory]
2578type = internal/memory
2579interval = 2
2580format-prefix = " "
2581format-prefix-foreground = ${colors.foreground-alt}
2582format-underline = #4bffdc
2583label = %percentage_used%%
2584
2585[module/wlan]
2586type = internal/network
2587interface =
2588interval = 3.0
2589
2590format-connected = <ramp-signal> <label-connected>
2591format-connected-underline = #9f78e1
2592label-connected = %essid%
2593
2594format-disconnected =
2595;format-disconnected = <label-disconnected>
2596;format-disconnected-underline = ${self.format-connected-underline}
2597;label-disconnected = %ifname% disconnected
2598;label-disconnected-foreground = ${colors.foreground-alt}
2599
2600ramp-signal-0 = 
2601ramp-signal-1 = 
2602ramp-signal-2 = 
2603ramp-signal-3 = 
2604ramp-signal-4 = 
2605ramp-signal-foreground = ${colors.foreground-alt}
2606
2607[module/eth]
2608type = internal/network
2609interface =
2610interval = 3.0
2611
2612format-connected-underline = #55aa55
2613format-connected-prefix = " "
2614format-connected-prefix-foreground = ${colors.foreground-alt}
2615label-connected = %local_ip%
2616
2617format-disconnected =
2618;format-disconnected = <label-disconnected>
2619;format-disconnected-underline = ${self.format-connected-underline}
2620;label-disconnected = %ifname% disconnected
2621;label-disconnected-foreground = ${colors.foreground-alt}
2622
2623[module/date]
2624type = internal/date
2625interval = 5
2626
2627date =
2628date-alt = " %Y-%m-%d"
2629
2630time = %H:%M
2631time-alt = %H:%M:%S
2632
2633format-prefix = 
2634format-prefix-foreground = ${colors.foreground-alt}
2635format-underline = #0a6cf5
2636
2637label = %date% %time%
2638
2639[module/volume]
2640type = internal/volume
2641
2642format-volume = <label-volume> <bar-volume>
2643label-volume = vol
2644label-volume-foreground = ${root.foreground}
2645
2646format-muted-prefix = " "
2647format-muted-foreground = ${colors.foreground-alt}
2648label-muted = mute
2649
2650bar-volume-width = 10
2651bar-volume-foreground-0 = #55aa55
2652bar-volume-foreground-1 = #55aa55
2653bar-volume-foreground-2 = #55aa55
2654bar-volume-foreground-3 = #55aa55
2655bar-volume-foreground-4 = #55aa55
2656bar-volume-foreground-5 = #f5a70a
2657bar-volume-foreground-6 = #ff5555
2658bar-volume-gradient = false
2659bar-volume-indicator = |
2660bar-volume-indicator-font = 2
2661bar-volume-fill = ─
2662bar-volume-fill-font = 2
2663bar-volume-empty = ─
2664bar-volume-empty-font = 2
2665bar-volume-empty-foreground = ${colors.foreground-alt}
2666
2667[module/battery]
2668type = internal/battery
2669battery = BAT0
2670adapter = ADP1
2671full-at = 64
2672
2673format-charging = <animation-charging> <label-charging>
2674format-charging-underline = #ffb52a
2675
2676format-discharging = <ramp-capacity> <label-discharging>
2677format-discharging-underline = ${self.format-charging-underline}
2678
2679format-full-prefix = " "
2680format-full-prefix-foreground = ${colors.foreground-alt}
2681format-full-underline = ${self.format-charging-underline}
2682
2683ramp-capacity-0 = 
2684ramp-capacity-1 = 
2685ramp-capacity-2 = 
2686ramp-capacity-foreground = ${colors.foreground-alt}
2687
2688animation-charging-0 = 
2689animation-charging-1 = 
2690animation-charging-2 = 
2691animation-charging-foreground = ${colors.foreground-alt}
2692animation-charging-framerate = 750
2693
2694[module/temperature]
2695type = internal/temperature
2696thermal-zone = 1
2697warn-temperature = 66
2698
2699format = <ramp> <label>
2700format-underline = #f50a4d
2701format-warn = <ramp> <label-warn>
2702format-warn-underline = ${self.format-underline}
2703
2704label = %temperature%
2705label-warn = %temperature%
2706label-warn-foreground = ${colors.secondary}
2707
2708ramp-0 = 
2709ramp-1 = 
2710ramp-2 = 
2711ramp-foreground = ${colors.foreground-alt}
2712
2713[module/powermenu]
2714type = custom/menu
2715
2716format-spacing = 1
2717
2718label-open = 
2719label-open-foreground = ${colors.secondary}
2720label-close =  cancel
2721label-close-foreground = ${colors.secondary}
2722label-separator = |
2723label-separator-foreground = ${colors.foreground-alt}
2724
2725menu-0-0 = reboot
2726menu-0-0-exec = menu-open-1
2727menu-0-1 = power off
2728menu-0-1-exec = menu-open-2
2729
2730menu-1-0 = cancel
2731menu-1-0-exec = menu-open-0
2732menu-1-1 = reboot
2733menu-1-1-exec = sudo reboot
2734
2735menu-2-0 = power off
2736menu-2-0-exec = sudo poweroff
2737menu-2-1 = cancel
2738menu-2-1-exec = menu-open-0
2739
2740[module/mail]
2741type = custom/script
2742interval = 60
2743format = <label>
2744format-prefix = " "
2745format-prefix-foreground = ${colors.foreground-alt}
2746format-underline = #0a6cf5
2747exec = notmuch count tag:unread
2748
2749[settings]
2750screenchange-reload = true
2751;compositing-background = xor
2752;compositing-background = screen
2753;compositing-foreground = source
2754;compositing-border = over
2755
2756[global/wm]
2757margin-top = 0
2758margin-bottom = 0
2759
2760; vim:ft=dosini
2761#+end_src
2762
2763*** polybar-launch
2764:PROPERTIES:
2e877d14 2765:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
1656853a
AB
2766:END:
2767
2e877d14 2768#+begin_src sh :tangle no
1656853a
AB
2769# Terminate already running bar instances
2770killall -q polybar
2771
2772# Wait until the processes have been shut down
2773while pgrep -x polybar >/dev/null; do sleep 1; done
2774
2775# Launch main bar
2776polybar main &
2777
2778echo "Bars launched..."
2779#+end_src
2780
b165a3e5
AB
2781** PowerTOP
2782:PROPERTIES:
2783:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2784:END:
2785
2786#+begin_src conf
2787[Unit]
2788Description=Powertop tunings
2789
2790[Service]
2791ExecStart=/usr/bin/powertop --auto-tune
2792RemainAfterExit=true
2793
2794[Install]
2795WantedBy=multi-user.target
2796#+end_src
2797
1656853a
AB
2798** ranger
2799
2800*** rc.conf
2801:PROPERTIES:
2802:header-args+: :tangle ~/.config/ranger/rc.conf
2803:END:
2804
2805#+begin_src conf :tangle no
2806# ===================================================================
2807# This file contains the default startup commands for ranger.
2808# To change them, it is recommended to create the file
2809# ~/.config/ranger/rc.conf and add your custom commands there.
2810#
2811# If you copy this whole file there, you may want to set the environment
2812# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2813#
2814# The purpose of this file is mainly to define keybindings and settings.
2815# For running more complex python code, please create a plugin in "plugins/" or
2816# a command in "commands.py".
2817#
2818# Each line is a command that will be run before the user interface
2819# is initialized. As a result, you can not use commands which rely
2820# on the UI such as :delete or :mark.
2821# ===================================================================
2822
2823# ===================================================================
2824# == Options
2825# ===================================================================
2826
2827# How many columns are there, and what are their relative widths?
2828set column_ratios 1,3,4
2829
2830# Which files should be hidden? (regular expression)
2831set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2832
2833# Show hidden files? You can toggle this by typing 'zh'
2834set show_hidden false
2835
2836# Ask for a confirmation when running the "delete" command?
2837# Valid values are "always" (default), "never", "multiple"
2838# With "multiple", ranger will ask only if you delete multiple files at once.
2839set confirm_on_delete multiple
2840
2841# Which script is used to generate file previews?
2842# ranger ships with scope.sh, a script that calls external programs (see
2843# README for dependencies) to preview images, archives, etc.
2844set preview_script ~/.config/ranger/scope.sh
2845
2846# Use the external preview script or display simple plain text previews?
2847set use_preview_script true
2848
2849# Open all images in this directory when running certain image viewers
2850# like feh or sxiv? You can still open selected files by marking them.
2851set open_all_images true
2852
2853# Be aware of version control systems and display information.
2854set vcs_aware false
2855
2856# State of the three backends git, hg, bzr. The possible states are
2857# disabled, local (only show local info), enabled (show local and remote
2858# information).
2859set vcs_backend_git enabled
2860set vcs_backend_hg disabled
2861set vcs_backend_bzr disabled
2862
2863# Preview images in full color with the external command "w3mimgpreview"?
2864# This requires the console web browser "w3m" and a supported terminal.
2865# It has been successfully tested with "xterm" and "urxvt" without tmux.
2866set preview_images true
2867
2868# Use a unicode "..." character to mark cut-off filenames?
2869set unicode_ellipsis false
2870
2871# Show dotfiles in the bookmark preview box?
2872set show_hidden_bookmarks true
2873
2874# Which colorscheme to use? These colorschemes are available by default:
2875# default, jungle, snow
2876set colorscheme default
2877
2878# Preview files on the rightmost column?
2879# And collapse (shrink) the last column if there is nothing to preview?
2880set preview_files true
2881set preview_directories true
2882set collapse_preview true
2883
2884# Save the console history on exit?
2885set save_console_history true
2886
2887# Draw the status bar on top of the browser window (default: bottom)
2888set status_bar_on_top false
2889
2890# Draw a progress bar in the status bar which displays the average state of all
2891# currently running tasks which support progress bars?
2892set draw_progress_bar_in_status_bar true
2893
2894# Draw borders around columns?
2895set draw_borders true
2896
2897# Display the directory name in tabs?
2898set dirname_in_tabs false
2899
2900# Enable the mouse support?
2901set mouse_enabled true
2902
2903# Display the file size in the main column or status bar?
2904set display_size_in_main_column true
2905set display_size_in_status_bar true
2906
2907# Display files tags in all columns or only in main column?
2908set display_tags_in_all_columns true
2909
2910# Set a title for the window?
2911set update_title false
2912
2913# Set the title to "ranger" in the tmux program?
2914set update_tmux_title false
2915
2916# Shorten the title if it gets long? The number defines how many
2917# directories are displayed at once, 0 turns off this feature.
2918set shorten_title 3
2919
2920# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2921set tilde_in_titlebar false
2922
2923# How many directory-changes or console-commands should be kept in history?
2924set max_history_size 20
2925set max_console_history_size 50
2926
2927# Try to keep so much space between the top/bottom border when scrolling:
2928set scroll_offset 8
2929
2930# Flush the input after each key hit? (Noticable when ranger lags)
2931set flushinput true
2932
2933# Padding on the right when there's no preview?
2934# This allows you to click into the space to run the file.
2935set padding_right true
2936
2937# Save bookmarks (used with mX and `X) instantly?
2938# This helps to synchronize bookmarks between multiple ranger
2939# instances but leads to *slight* performance loss.
2940# When false, bookmarks are saved when ranger is exited.
2941set autosave_bookmarks true
2942
2943# You can display the "real" cumulative size of directories by using the
2944# command :get_cumulative_size or typing "dc". The size is expensive to
2945# calculate and will not be updated automatically. You can choose
2946# to update it automatically though by turning on this option:
2947set autoupdate_cumulative_size false
2948
2949# Turning this on makes sense for screen readers:
2950set show_cursor false
2951
2952# One of: size, basename, mtime, type
2953set sort natural
2954
2955# Additional sorting options
2956set sort_reverse false
2957set sort_case_insensitive true
2958set sort_directories_first true
2959
2960# Enable this if key combinations with the Alt Key don't work for you.
2961# (Especially on xterm)
2962set xterm_alt_key false
2963
2964# ===================================================================
2965# == Local Options
2966# ===================================================================
2967# You can set local options that only affect a single directory.
2968
2969# Examples:
2970# setlocal path=~/downloads sort mtime
2971
2972# ===================================================================
2973# == Command Aliases in the Console
2974# ===================================================================
2975
2976alias e edit
2977alias q quit
2978alias q! quitall
2979alias qall quitall
2980alias setl setlocal
2981
2982alias filter scout -prt
2983alias find scout -aet
2984alias mark scout -mr
2985alias unmark scout -Mr
2986alias search scout -rs
2987alias search_inc scout -rts
2988alias travel scout -aefiklst
2989
2990# ===================================================================
2991# == Define keys for the browser
2992# ===================================================================
2993
2994# Basic
2995map Q quit!
2996map q quit
2997copymap q ZZ ZQ
2998
2999map R reload_cwd
3000map <C-r> reset
3001map <C-l> redraw_window
3002map <C-c> abort
3003map <esc> change_mode normal
3004
3005map i display_file
3006map ? help
3007map W display_log
3008map w taskview_open
3009map S shell $SHELL
3010
3011map : console
3012map ; console
3013map ! console shell
3014map @ console -p6 shell %%s
3015map # console shell -p
3016map s console shell
3017map r chain draw_possible_programs; console open_with
3018map f console find
3019map cd console cd
3020
3021# Tagging / Marking
3022map t tag_toggle
3023map ut tag_remove
3024map "<any> tag_toggle tag=%any
3025map <Space> mark_files toggle=True
3026map v mark_files all=True toggle=True
3027map uv mark_files all=True val=False
3028map V toggle_visual_mode
3029map uV toggle_visual_mode reverse=True
3030
3031# For the nostalgics: Midnight Commander bindings
3032map <F1> help
3033map <F3> display_file
3034map <F4> edit
3035map <F5> copy
3036map <F6> cut
3037map <F7> console mkdir
3038map <F8> console delete
3039map <F10> exit
3040
3041# In case you work on a keyboard with dvorak layout
3042map <UP> move up=1
3043map <DOWN> move down=1
3044map <LEFT> move left=1
3045map <RIGHT> move right=1
3046map <HOME> move to=0
3047map <END> move to=-1
3048map <PAGEDOWN> move down=1 pages=True
3049map <PAGEUP> move up=1 pages=True
3050map <CR> move right=1
3051map <DELETE> console delete
3052map <INSERT> console touch
3053
3054# VIM-like
3055copymap <UP> k
3056copymap <DOWN> j
3057copymap <LEFT> h
3058copymap <RIGHT> l
3059copymap <HOME> gg
3060copymap <END> G
3061copymap <PAGEDOWN> <C-F>
3062copymap <PAGEUP> <C-B>
3063
3064map J move down=0.5 pages=True
3065map K move up=0.5 pages=True
3066copymap J <C-D>
3067copymap K <C-U>
3068
3069# Jumping around
3070map H history_go -1
3071map L history_go 1
3072map ] move_parent 1
3073map [ move_parent -1
3074map } traverse
3075
3076map gh cd ~
3077map ge cd /etc
3078map gu cd /usr
3079map gd cd /dev
3080map gl cd -r .
3081map gL cd -r %f
3082map go cd /opt
3083map gv cd /var
3084map gm cd /media
3085map gM cd /mnt
3086map gs cd /srv
3087map gr cd /
3088map gR eval fm.cd(ranger.RANGERDIR)
3089map g/ cd /
3090map g? cd /usr/share/doc/ranger
3091
3092# External Programs
3093map E edit
3094map du shell -p du --max-depth=1 -h --apparent-size
3095map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3096map yp shell -d echo -n %d/%f | xsel -i
3097map yd shell -d echo -n %d | xsel -i
3098map yn shell -d echo -n %f | xsel -i
3099
3100# Filesystem Operations
3101map = chmod
3102
3103map cw console rename
3104map A eval fm.open_console('rename ' + fm.thisfile.basename)
3105map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3106
3107map pp paste
3108map po paste overwrite=True
3109map pl paste_symlink relative=False
3110map pL paste_symlink relative=True
3111map phl paste_hardlink
3112map pht paste_hardlinked_subtree
3113
3114map dd cut
3115map ud uncut
3116map da cut mode=add
3117map dr cut mode=remove
3118
3119map yy copy
3120map uy uncut
3121map ya copy mode=add
3122map yr copy mode=remove
3123
3124# Temporary workarounds
3125map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3126map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3127map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3128map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3129map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3130map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3131map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3132map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3133
3134# Searching
3135map / console search
3136map n search_next
3137map N search_next forward=False
3138map ct search_next order=tag
3139map cs search_next order=size
3140map ci search_next order=mimetype
3141map cc search_next order=ctime
3142map cm search_next order=mtime
3143map ca search_next order=atime
3144
3145# Tabs
3146map <C-n> tab_new ~
3147map <C-w> tab_close
3148map <TAB> tab_move 1
3149map <S-TAB> tab_move -1
3150map <A-Right> tab_move 1
3151map <A-Left> tab_move -1
3152map gt tab_move 1
3153map gT tab_move -1
3154map gn tab_new ~
3155map gc tab_close
3156map uq tab_restore
3157map <a-1> tab_open 1
3158map <a-2> tab_open 2
3159map <a-3> tab_open 3
3160map <a-4> tab_open 4
3161map <a-5> tab_open 5
3162map <a-6> tab_open 6
3163map <a-7> tab_open 7
3164map <a-8> tab_open 8
3165map <a-9> tab_open 9
3166
3167# Sorting
3168map or toggle_option sort_reverse
3169map os chain set sort=size; set sort_reverse=False
3170map ob chain set sort=basename; set sort_reverse=False
3171map on chain set sort=natural; set sort_reverse=False
3172map om chain set sort=mtime; set sort_reverse=False
3173map oc chain set sort=ctime; set sort_reverse=False
3174map oa chain set sort=atime; set sort_reverse=False
3175map ot chain set sort=type; set sort_reverse=False
3176
3177map oS chain set sort=size; set sort_reverse=True
3178map oB chain set sort=basename; set sort_reverse=True
3179map oN chain set sort=natural; set sort_reverse=True
3180map oM chain set sort=mtime; set sort_reverse=True
3181map oC chain set sort=ctime; set sort_reverse=True
3182map oA chain set sort=atime; set sort_reverse=True
3183map oT chain set sort=type; set sort_reverse=True
3184
3185map dc get_cumulative_size
3186
3187# Settings
3188map zc toggle_option collapse_preview
3189map zd toggle_option sort_directories_first
3190map zh toggle_option show_hidden
3191map <C-h> toggle_option show_hidden
3192map zi toggle_option flushinput
3193map zm toggle_option mouse_enabled
3194map zp toggle_option preview_files
3195map zP toggle_option preview_directories
3196map zs toggle_option sort_case_insensitive
3197map zu toggle_option autoupdate_cumulative_size
3198map zv toggle_option use_preview_script
3199map zf console filter
3200
3201# Bookmarks
3202map `<any> enter_bookmark %any
3203map '<any> enter_bookmark %any
3204map m<any> set_bookmark %any
3205map um<any> unset_bookmark %any
3206
3207map m<bg> draw_bookmarks
3208copymap m<bg> um<bg> `<bg> '<bg>
3209
3210# Generate all the chmod bindings with some python help:
3211eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3212eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3213eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3214eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3215eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3216
3217eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3218eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3219eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3220eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3221eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3222
3223# ===================================================================
3224# == Define keys for the console
3225# ===================================================================
3226# Note: Unmapped keys are passed directly to the console.
3227
3228# Basic
3229cmap <tab> eval fm.ui.console.tab()
3230cmap <s-tab> eval fm.ui.console.tab(-1)
3231cmap <ESC> eval fm.ui.console.close()
3232cmap <CR> eval fm.ui.console.execute()
3233cmap <C-l> redraw_window
3234
3235copycmap <ESC> <C-c>
3236copycmap <CR> <C-j>
3237
3238# Move around
3239cmap <up> eval fm.ui.console.history_move(-1)
3240cmap <down> eval fm.ui.console.history_move(1)
3241cmap <left> eval fm.ui.console.move(left=1)
3242cmap <right> eval fm.ui.console.move(right=1)
3243cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3244cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3245
3246# Line Editing
3247cmap <backspace> eval fm.ui.console.delete(-1)
3248cmap <delete> eval fm.ui.console.delete(0)
3249cmap <C-w> eval fm.ui.console.delete_word()
3250cmap <C-k> eval fm.ui.console.delete_rest(1)
3251cmap <C-u> eval fm.ui.console.delete_rest(-1)
3252cmap <C-y> eval fm.ui.console.paste()
3253
3254# And of course the emacs way
3255copycmap <up> <C-p>
3256copycmap <down> <C-n>
3257copycmap <left> <C-b>
3258copycmap <right> <C-f>
3259copycmap <home> <C-a>
3260copycmap <end> <C-e>
3261copycmap <delete> <C-d>
3262copycmap <backspace> <C-h>
3263
3264# Note: There are multiple ways to express backspaces. <backspace> (code 263)
3265# and <backspace2> (code 127). To be sure, use both.
3266copycmap <backspace> <backspace2>
3267
3268# This special expression allows typing in numerals:
3269cmap <allow_quantifiers> false
3270
3271# ===================================================================
3272# == Pager Keybindings
3273# ===================================================================
3274
3275# Movement
3276pmap <down> pager_move down=1
3277pmap <up> pager_move up=1
3278pmap <left> pager_move left=4
3279pmap <right> pager_move right=4
3280pmap <home> pager_move to=0
3281pmap <end> pager_move to=-1
3282pmap <pagedown> pager_move down=1.0 pages=True
3283pmap <pageup> pager_move up=1.0 pages=True
3284pmap <C-d> pager_move down=0.5 pages=True
3285pmap <C-u> pager_move up=0.5 pages=True
3286
3287copypmap <UP> k <C-p>
3288copypmap <DOWN> j <C-n> <CR>
3289copypmap <LEFT> h
3290copypmap <RIGHT> l
3291copypmap <HOME> g
3292copypmap <END> G
3293copypmap <C-d> d
3294copypmap <C-u> u
3295copypmap <PAGEDOWN> n f <C-F> <Space>
3296copypmap <PAGEUP> p b <C-B>
3297
3298# Basic
3299pmap <ESC> pager_close
3300copypmap <ESC> q Q i <F3>
3301pmap E edit_file
3302
3303# ===================================================================
3304# == Taskview Keybindings
3305# ===================================================================
3306
3307# Movement
3308tmap <up> taskview_move up=1
3309tmap <down> taskview_move down=1
3310tmap <home> taskview_move to=0
3311tmap <end> taskview_move to=-1
3312tmap <pagedown> taskview_move down=1.0 pages=True
3313tmap <pageup> taskview_move up=1.0 pages=True
3314tmap <C-d> taskview_move down=0.5 pages=True
3315tmap <C-u> taskview_move up=0.5 pages=True
3316
3317copytmap <UP> k <C-p>
3318copytmap <DOWN> j <C-n> <CR>
3319copytmap <HOME> g
3320copytmap <END> G
3321copytmap <C-u> u
3322copytmap <PAGEDOWN> n f <C-F> <Space>
3323copytmap <PAGEUP> p b <C-B>
3324
3325# Changing priority and deleting tasks
3326tmap J eval -q fm.ui.taskview.task_move(-1)
3327tmap K eval -q fm.ui.taskview.task_move(0)
3328tmap dd eval -q fm.ui.taskview.task_remove()
3329tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3330tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3331tmap <delete> eval -q fm.ui.taskview.task_remove()
3332
3333# Basic
3334tmap <ESC> taskview_close
3335copytmap <ESC> q Q w <C-c>
3336#+end_src
3337
3338*** scope.sh
3339:PROPERTIES:
2e877d14 3340:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
1656853a
AB
3341:END:
3342
2e877d14 3343#+begin_src sh :tangle no
1656853a
AB
3344# ranger supports enhanced previews. If the option "use_preview_script"
3345# is set to True and this file exists, this script will be called and its
3346# output is displayed in ranger. ANSI color codes are supported.
3347
3348# NOTES: This script is considered a configuration file. If you upgrade
3349# ranger, it will be left untouched. (You must update it yourself.)
3350# Also, ranger disables STDIN here, so interactive scripts won't work properly
3351
3352# Meanings of exit codes:
3353# code | meaning | action of ranger
3354# -----+------------+-------------------------------------------
3355# 0 | success | success. display stdout as preview
3356# 1 | no preview | failure. display no preview at all
3357# 2 | plain text | display the plain content of the file
3358# 3 | fix width | success. Don't reload when width changes
3359# 4 | fix height | success. Don't reload when height changes
3360# 5 | fix both | success. Don't ever reload
3361
3362# Meaningful aliases for arguments:
3363path="$1" # Full path of the selected file
3364width="$2" # Width of the preview pane (number of fitting characters)
3365height="$3" # Height of the preview pane (number of fitting characters)
3366
3367maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3368
3369# Find out something about the file:
3370mimetype=$(file --mime-type -Lb "$path")
3371extension=${path##*.}
3372
3373# Functions:
3374# runs a command and saves its output into $output. Useful if you need
3375# the return value AND want to use the output in a pipe
3376try() { output=$(eval '"$@"'); }
3377
3378# writes the output of the previouosly used "try" command
3379dump() { echo "$output"; }
3380
3381# a common post-processing function used after most commands
3382trim() { head -n "$maxln"; }
3383
3384# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3385highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3386
3387case "$extension" in
3388 # Archive extensions:
3389 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3390 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3391 try als "$path" && { dump | trim; exit 0; }
3392 try acat "$path" && { dump | trim; exit 3; }
3393 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3394 exit 1;;
3395 rar)
3396 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3397 # PDF documents:
3398 pdf)
3399 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3400 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3401 # BitTorrent Files
3402 torrent)
3403 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3404 # HTML Pages:
3405 htm|html|xhtml)
3406 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3407 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3408 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3409 ;; # fall back to highlight/cat if the text browsers fail
3410esac
3411
3412case "$mimetype" in
3413 # Syntax highlight for text files:
3414 text/* | */xml)
3415 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3416 # Ascii-previews of images:
3417 image/*)
3418 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3419 # Display information about media files:
3420 video/* | audio/*)
3421 exiftool "$path" && exit 5
3422 # Use sed to remove spaces so the output fits into the narrow window
3423 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3424esac
3425
3426exit 1
3427#+end_src
3428
2f1dcf9d
AB
3429** redshift
3430:PROPERTIES:
e2149232 3431:header-args+: :tangle ~/.config/redshift.conf :comments none
2f1dcf9d
AB
3432:END:
3433
3434#+begin_src conf
3435; Global settings for redshift
3436[redshift]
3437; Set the day and night screen temperatures (Neutral is 6500K)
3438;temp-day=5700
3439;temp-night=3500
3440
3441;temp-day=6500
3442temp-day=6200
3443;temp-night=4800
3444;temp-night=5000
3445;temp-night=4500
3446temp-night=4000
3447
3448; Enable/Disable a smooth transition between day and night
3449; 0 will cause a direct change from day to night screen temperature.
3450; 1 will gradually increase or decrease the screen temperature.
3451transition=1
3452
3453; Set the screen brightness. Default is 1.0.
3454;brightness=0.9
3455; It is also possible to use different settings for day and night
3456; since version 1.8.
3457;brightness-day=0.7
3458;brightness-night=0.4
3459; Set the screen gamma (for all colors, or each color channel
3460; individually)
3461;gamma=0.8
3462;gamma=1.0
3463;gamma=0.8:0.7:0.8
3464; This can also be set individually for day and night since
3465; version 1.10.
3466;gamma-day=0.8:0.7:0.8
3467;gamma-night=0.6
3468
3469; Set the location-provider: 'geoclue2' or 'manual'
3470; type 'redshift -l list' to see possible values.
3471; The location provider settings are in a different section.
3472;location-provider=manual
3473location-provider=geoclue2
3474
3475; Set the adjustment-method: 'randr', 'vidmode'
3476; type 'redshift -m list' to see all possible values.
3477; 'randr' is the preferred method, 'vidmode' is an older API.
3478; but works in some cases when 'randr' does not.
3479; The adjustment method settings are in a different section.
3480adjustment-method=randr
3481
3482; Configuration of the location-provider:
3483; type 'redshift -l PROVIDER:help' to see the settings.
3484; ex: 'redshift -l manual:help'
3485; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3486; are negative numbers.
3487;[manual]
3488;lat=48.1
3489;lon=11.6
3490
3491; Configuration of the adjustment-method
3492; type 'redshift -m METHOD:help' to see the settings.
3493; ex: 'redshift -m randr:help'
3494; In this example, randr is configured to adjust screen 1.
3495; Note that the numbering starts from 0, so this is actually the
3496; second screen. If this option is not specified, Redshift will try
3497; to adjust _all_ screens.
3498;[randr]
3499;screen=1
3500#+end_src
3501
3502** rofi
3503:PROPERTIES:
3504:header-args+: :tangle ~/.config/rofi/config
3505:END:
3506
3507#+begin_src conf
3508rofi.font: Ubuntu Mono 13
3509! rofi.font: Inconsolata 16
3510! rofi.font: Iosevka 13
3511! rofi.font: Source Code Pro 11
3512rofi.modi: run,window
3513! rofi.width: 640
3514rofi.width: 600
3515!rofi.location: 2
3516!rofi.yoffset: 200
3517rofi.monitor: -1
3518!rofi.lines: 10
3519
3520!rofi.theme: /usr/share/rofi/themes//Arc.rasi
3521!rofi.theme: /usr/share/rofi/themes//Paper.rasi
3522!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3523
3524rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3525#+end_src
3526
3527** rofi-pass
3528:PROPERTIES:
3529:header-args+: :tangle ~/.config/rofi-pass/config
3530:END:
3531
3532#+begin_src conf
3533# permanently set alternative root dir
3534# root=/path/to/root
3535
3536# rofi command. Make sure to have "$@" as last argument
3537_rofi () {
3538 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
61f337f4 3539 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
2f1dcf9d
AB
3540}
3541
3542# xdotool needs the keyboard layout to be set using setxkbmap
3543# You can do this in your autostart scripts (e.g. xinitrc)
3544
3545# If for some reason, you cannot do this, you can set the command here.
3546# and set fix_layout to true
3547fix_layout=false
3548
3549layout_cmd () {
3550 setxkbmap us
3551}
3552
3553# fields to be used
3554URL_field='url'
3555USERNAME_field='user'
3556AUTOTYPE_field='autotype'
3557
3558# delay to be used for :delay keyword
3559delay=2
3560
3561## Programs to be used
3562# Editor
3563EDITOR='gvim -f'
3564
3565# Browser
3566BROWSER='chromium'
3567
3568## Misc settings
3569
3570default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3571auto_enter='false'
3572notify='false'
3573default_autotype='user :tab pass'
3574
3575# color of the help messages
3576# leave empty for autodetection
3577help_color="#4872FF"
3578
3579# Clipboard settings
3580# Possible options: primary, clipboard, both
3581clip=primary
3582
3583# Options for generating new password entries
3584# default_user is also used for password files that have no user field.
3585default_user=aminb
3586default_user2=aminban
3587password_length=30
3588
3589# Custom Keybindings
3590#autotype="Alt+1"
3591autotype="Alt+m"
3592type_user="Alt+2"
3593type_pass="Alt+3"
3594open_url="Alt+4"
3595copy_name="Alt+u"
3596copy_url="Alt+l"
3597copy_pass="Alt+p"
3598show="Alt+o"
3599copy_entry="Alt+2"
3600type_entry="Alt+1"
3601copy_menu="Alt+c"
3602action_menu="Alt+a"
3603type_menu="Alt+t"
3604help="Alt+h"
3605switch="Alt+x"
3606insert_pass="Alt+n"
3607#+end_src
3608
08e87a0a
AB
3609** TLP
3610
3611*** TODO enigma
3612*** plasma
3613
3614#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3615# ------------------------------------------------------------------------------
3616# tlp - Parameters for power saving
3617# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3618
3619# Hint: some features are disabled by default, remove the leading # to enable
3620# them.
3621
3622# Set to 0 to disable, 1 to enable TLP.
3623TLP_ENABLE=1
3624
3625# Operation mode when no power supply can be detected: AC, BAT.
3626# Concerns some desktop and embedded hardware only.
3627TLP_DEFAULT_MODE=AC
3628
3629# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3630# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3631TLP_PERSISTENT_DEFAULT=0
3632
3633# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3634# Non-zero value enables, zero disables laptop mode.
3635DISK_IDLE_SECS_ON_AC=0
3636DISK_IDLE_SECS_ON_BAT=2
3637
3638# Dirty page values (timeouts in secs).
3639MAX_LOST_WORK_SECS_ON_AC=15
3640MAX_LOST_WORK_SECS_ON_BAT=60
3641
3642# Hint: CPU parameters below are disabled by default, remove the leading #
3643# to enable them, otherwise kernel default values are used.
3644
3645# Select a CPU frequency scaling governor.
3646# Intel Core i processor with intel_pstate driver:
3647# powersave(*), performance.
3648# Older hardware with acpi-cpufreq driver:
3649# ondemand(*), powersave, performance, conservative, schedutil.
3650# (*) is recommended.
3651# Hint: use tlp-stat -p to show the active driver and available governors.
3652# Important:
3653# powersave for intel_pstate and ondemand for acpi-cpufreq are power
3654# efficient for *almost all* workloads and therefore kernel and most
3655# distributions have chosen them as defaults. If you still want to change,
3656# you should know what you're doing! You *must* disable your distribution's
3657# governor settings or conflicts will occur.
3658#CPU_SCALING_GOVERNOR_ON_AC=powersave
3659#CPU_SCALING_GOVERNOR_ON_BAT=powersave
3660
3661# Set the min/max frequency available for the scaling governor.
3662# Possible values strongly depend on your CPU. For available frequencies see
3663# the output of tlp-stat -p.
3664#CPU_SCALING_MIN_FREQ_ON_AC=0
3665#CPU_SCALING_MAX_FREQ_ON_AC=0
3666#CPU_SCALING_MIN_FREQ_ON_BAT=0
3667#CPU_SCALING_MAX_FREQ_ON_BAT=0
3668
3669# Set energy performance hints (HWP) for Intel P-state governor:
3670# performance, balance_performance, default, balance_power, power
3671# Values are given in order of increasing power saving.
3672# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3673CPU_HWP_ON_AC=balance_performance
3674CPU_HWP_ON_BAT=balance_power
3675
3676# Set Intel P-state performance: 0..100 (%).
3677# Limit the max/min P-state to control the power dissipation of the CPU.
3678# Values are stated as a percentage of the available performance.
3679# Requires an Intel Core i processor with intel_pstate driver.
3680#CPU_MIN_PERF_ON_AC=0
3681#CPU_MAX_PERF_ON_AC=100
3682#CPU_MIN_PERF_ON_BAT=0
3683#CPU_MAX_PERF_ON_BAT=30
3684
3685# Set the CPU "turbo boost" feature: 0=disable, 1=allow
3686# Requires an Intel Core i processor.
3687# Important:
3688# - This may conflict with your distribution's governor settings
3689# - A value of 1 does *not* activate boosting, it just allows it
3690#CPU_BOOST_ON_AC=1
3691#CPU_BOOST_ON_BAT=0
3692
3693# Minimize number of used CPU cores/hyper-threads under light load conditions:
3694# 0=disable, 1=enable.
3695SCHED_POWERSAVE_ON_AC=0
3696SCHED_POWERSAVE_ON_BAT=1
3697
3698# Kernel NMI Watchdog:
3699# 0=disable (default, saves power), 1=enable (for kernel debugging only).
3700NMI_WATCHDOG=0
3701
3702# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3703# Frequency voltage pairs are written to:
3704# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3705# CAUTION: only use this, if you thoroughly understand what you are doing!
3706#PHC_CONTROLS="F:V F:V F:V F:V"
3707
3708# Set CPU performance versus energy savings policy:
3709# performance, balance-performance, default, balance-power, power.
3710# Values are given in order of increasing power saving.
3711# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3712ENERGY_PERF_POLICY_ON_AC=performance
3713ENERGY_PERF_POLICY_ON_BAT=balance-power
3714
3715# Disk devices; separate multiple devices with spaces (default: sda).
3716# Devices can be specified by disk ID also (lookup with: tlp diskid).
3717DISK_DEVICES="sda sdb"
3718
3719# Disk advanced power management level: 1..254, 255 (max saving, min, off).
3720# Levels 1..127 may spin down the disk; 255 allowable on most drives.
3721# Separate values for multiple disks with spaces. Use the special value 'keep'
3722# to keep the hardware default for the particular disk.
3723DISK_APM_LEVEL_ON_AC="254 254"
3724DISK_APM_LEVEL_ON_BAT="128 128"
3725
3726# Hard disk spin down timeout:
3727# 0: spin down disabled
3728# 1..240: timeouts from 5s to 20min (in units of 5s)
3729# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3730# See 'man hdparm' for details.
3731# Separate values for multiple disks with spaces. Use the special value 'keep'
3732# to keep the hardware default for the particular disk.
3733#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3734#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3735
3736# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3737# Separate values for multiple disks with spaces. Use the special value 'keep'
3738# to keep the kernel default scheduler for the particular disk.
3739#DISK_IOSCHED="cfq cfq"
3740
3741# AHCI link power management (ALPM) for disk devices:
3742# min_power, med_power_with_dipm(*), medium_power, max_performance.
3743# (*) Kernel >= 4.15 required, then recommended.
3744# Multiple values separated with spaces are tried sequentially until success.
3745SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3746SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3747
3748# Exclude host devices from AHCI link power management.
3749# Separate multiple hosts with spaces.
3750#SATA_LINKPWR_BLACKLIST="host1"
3751
3752# Runtime Power Management for AHCI host and disks devices:
3753# on=disable, auto=enable.
3754# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3755#AHCI_RUNTIME_PM_ON_AC=on
3756#AHCI_RUNTIME_PM_ON_BAT=on
3757
3758# Seconds of inactivity before disk is suspended.
3759AHCI_RUNTIME_PM_TIMEOUT=15
3760
3761# PCI Express Active State Power Management (PCIe ASPM):
3762# default, performance, powersave.
3763PCIE_ASPM_ON_AC=performance
3764PCIE_ASPM_ON_BAT=powersave
3765
3766# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3767# auto = mid on BAT, high on AC; default = use hardware defaults.
3768RADEON_POWER_PROFILE_ON_AC=high
3769RADEON_POWER_PROFILE_ON_BAT=low
3770
3771# Radeon dynamic power management method (DPM): battery, performance.
3772RADEON_DPM_STATE_ON_AC=performance
3773RADEON_DPM_STATE_ON_BAT=battery
3774
3775# Radeon DPM performance level: auto, low, high; auto is recommended.
3776RADEON_DPM_PERF_LEVEL_ON_AC=auto
3777RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3778
3779# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3780WIFI_PWR_ON_AC=off
3781WIFI_PWR_ON_BAT=on
3782
3783# Disable wake on LAN: Y/N.
3784WOL_DISABLE=Y
3785
3786# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3787# A value of 0 disables, >=1 enables power saving (recommended: 1).
3788SOUND_POWER_SAVE_ON_AC=0
3789SOUND_POWER_SAVE_ON_BAT=0
3790
3791# Disable controller too (HDA only): Y/N.
3792SOUND_POWER_SAVE_CONTROLLER=N
3793
3794# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3795# Drive can be powered on again by releasing (and reinserting) the eject lever
3796# or by pressing the disc eject button on newer models.
3797# Note: an UltraBay/MediaBay hard disk is never powered off.
3798BAY_POWEROFF_ON_AC=0
3799BAY_POWEROFF_ON_BAT=0
3800# Optical drive device to power off (default sr0).
3801BAY_DEVICE="sr0"
3802
3803# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3804RUNTIME_PM_ON_AC=on
3805RUNTIME_PM_ON_BAT=auto
3806
3807# Exclude PCI(e) device adresses the following list from Runtime PM
3808# (separate with spaces). Use lspci to get the adresses (1st column).
3809#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3810RUNTIME_PM_BLACKLIST="01:00.0"
3811
3812# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3813# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3814# prevents accidential power-on of dGPU in hybrid graphics setups.
3815# Use "" to disable the feature completely.
3816# Separate multiple drivers with spaces.
3817#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3818
3819# Set to 0 to disable, 1 to enable USB autosuspend feature.
3820USB_AUTOSUSPEND=1
3821
3822# Exclude listed devices from USB autosuspend (separate with spaces).
3823# Use lsusb to get the ids.
3824# Note: input devices (usbhid) are excluded automatically
3825#USB_BLACKLIST="1111:2222 3333:4444"
3826
3827# Bluetooth devices are excluded from USB autosuspend:
3828# 0=do not exclude, 1=exclude.
3829USB_BLACKLIST_BTUSB=0
3830
3831# Phone devices are excluded from USB autosuspend:
3832# 0=do not exclude, 1=exclude (enable charging).
3833USB_BLACKLIST_PHONE=0
3834
3835# Printers are excluded from USB autosuspend:
3836# 0=do not exclude, 1=exclude.
3837USB_BLACKLIST_PRINTER=1
3838
3839# WWAN devices are excluded from USB autosuspend:
3840# 0=do not exclude, 1=exclude.
3841USB_BLACKLIST_WWAN=1
3842
3843# Include listed devices into USB autosuspend even if already excluded
3844# by the blacklists above (separate with spaces).
3845# Use lsusb to get the ids.
3846#USB_WHITELIST="1111:2222 3333:4444"
3847
3848# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3849# (workaround for USB devices that cause shutdown problems).
3850#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3851
3852# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3853# on system startup: 0=disable, 1=enable.
3854# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3855# are ignored when this is enabled!
3856#RESTORE_DEVICE_STATE_ON_STARTUP=0
3857RESTORE_DEVICE_STATE_ON_STARTUP=1
3858
3859# Radio devices to disable on startup: bluetooth, wifi, wwan.
3860# Separate multiple devices with spaces.
3861#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3862
3863# Radio devices to enable on startup: bluetooth, wifi, wwan.
3864# Separate multiple devices with spaces.
3865#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3866
3867# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3868# (workaround for devices that are blocking shutdown).
3869#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3870
3871# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3872# (to prevent other operating systems from missing radios).
3873#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3874
3875# Radio devices to enable on AC: bluetooth, wifi, wwan.
3876#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3877
3878# Radio devices to disable on battery: bluetooth, wifi, wwan.
3879#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3880
3881# Radio devices to disable on battery when not in use (not connected):
3882# bluetooth, wifi, wwan.
3883#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3884
3885# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3886# required). Charging starts when the remaining capacity falls below the
3887# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3888# Main / Internal battery (values in %)
3889#START_CHARGE_THRESH_BAT0=75
3890#STOP_CHARGE_THRESH_BAT0=80
3891# Ultrabay / Slice / Replaceable battery (values in %)
3892#START_CHARGE_THRESH_BAT1=75
3893#STOP_CHARGE_THRESH_BAT1=80
3894
3895# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3896#RESTORE_THRESHOLDS_ON_BAT=1
3897
3898# ------------------------------------------------------------------------------
3899# tlp-rdw - Parameters for the radio device wizard
3900# Possible devices: bluetooth, wifi, wwan.
3901
3902# Hints:
3903# - Parameters are disabled by default, remove the leading # to enable them
3904# - Separate multiple radio devices with spaces
3905
3906# Radio devices to disable on connect.
3907#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3908#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3909#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3910
3911# Radio devices to enable on disconnect.
3912#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3913#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3914#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3915
3916# Radio devices to enable/disable when docked.
3917#DEVICES_TO_ENABLE_ON_DOCK=""
3918#DEVICES_TO_DISABLE_ON_DOCK=""
3919
3920# Radio devices to enable/disable when undocked.
3921#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3922#DEVICES_TO_DISABLE_ON_UNDOCK=""
3923#+end_src
3924
2e877d14
AB
3925** X
3926
3927*** xprofile
3928:PROPERTIES:
3929:header-args+: :tangle ~/.xprofile
3930:END:
3931
3932=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
3933contrary, it's automatically sourced by LightDM, my display manager of
3934choice.
3935
3936#+begin_src sh
6bab6a4a 3937xset -b # disable bell
b5208764 3938xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
6bab6a4a 3939
2e877d14
AB
3940# setxkbmap -option compose:ralt
3941
3942setxkbmap -option ctrl:nocaps # turn capslock into control
3943setxkbmap -option altwin:swap_alt_win # swap alt and super
3944
3945if [ $(hostname) = "plasma" ]
3946then
3947 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
3948fi
3949
3950if [ $(hostname) = "enigma" ]
3951then
3952 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
3953fi
3954
3955light -Scrs "intel_backlight" 2
3956
3957source $HOME/.zprofile
3958
3959export _JAVA_AWT_WM_NONREPARENTING=1
3960export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
3961
2e877d14
AB
3962if [ $(hostname) = "plasma" ]
3963then
c0132386 3964 unlock-def-gk.py &
2e877d14 3965fi
c0132386
AB
3966
3967bspwm &
2e877d14
AB
3968#+end_src
3969
3970*** X resources
3971
3972**** Xresources
3973:PROPERTIES:
3974:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
3975:END:
3976
3977#+begin_src conf-xdefaults
3978#include ".Xresources.d/fonts"
3979! #include ".Xresources.d/colors"
3980#include ".Xresources.d/emacs"
3981#include ".Xresources.d/rxvt-unicode"
3982#+end_src
3983
3984**** Xresources.d
3985
3986***** fonts
3987:PROPERTIES:
3988:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
3989:END:
3990
3991#+begin_src conf-xdefaults
3992Xft.lcdfilter: lcddefault
3993Xft.antialias: true
3994Xft.autohint: 0
3995Xft.hinting: true
3996Xft.hintstyle: hintslight
3997! Xft.hintstyle: hintfull
3998Xft.rgba: rgb
3999Xft.dpi: 96
4000#+end_src
4001
4002***** colors
4003:PROPERTIES:
4004:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4005:END:
4006
4007#+begin_src conf-xdefaults :tangle no
4008#include "gruvbox-light.xresources"
4009! #include "gruvbox-dark.xresources"
4010#include "gruvbox-urxvt256.xresources"
4011#+end_src
4012
4013#+begin_src conf-xdefaults :tangle no
4014! -----------------------------------------------------------------------------
4015! File: gruvbox-light.xresources
4016! Description: Retro groove colorscheme generalized
4017! Author: morhetz <morhetz@gmail.com>
4018! Source: https://github.com/morhetz/gruvbox-generalized
4019! Last Modified: 6 Sep 2014
4020! -----------------------------------------------------------------------------
4021
4022! hard contrast: *background: #f9f5d7
4023*background: #fbf1c7
4024! soft contrast: *background: #f2e5bc
4025*foreground: #3c3836
4026! Black + DarkGrey
4027*color0: #fdf4c1
4028*color8: #928374
4029! DarkRed + Red
4030*color1: #cc241d
4031*color9: #9d0006
4032! DarkGreen + Green
4033*color2: #98971a
4034*color10: #79740e
4035! DarkYellow + Yellow
4036*color3: #d79921
4037*color11: #b57614
4038! DarkBlue + Blue
4039*color4: #458588
4040*color12: #076678
4041! DarkMagenta + Magenta
4042*color5: #b16286
4043*color13: #8f3f71
4044! DarkCyan + Cyan
4045*color6: #689d6a
4046*color14: #427b58
4047! LightGrey + White
4048*color7: #7c6f64
4049*color15: #3c3836
4050#+end_src
4051
4052#+begin_src conf-xdefaults :tangle no
4053! -----------------------------------------------------------------------------
4054! File: gruvbox-dark.xresources
4055! Description: Retro groove colorscheme generalized
4056! Author: morhetz <morhetz@gmail.com>
4057! Source: https://github.com/morhetz/gruvbox-generalized
4058! Last Modified: 6 Sep 2014
4059! -----------------------------------------------------------------------------
4060
4061! hard contrast: *background: #1d2021
4062*background: #282828
4063! soft contrast: *background: #32302f
4064*foreground: #ebdbb2
4065! Black + DarkGrey
4066*color0: #282828
4067*color8: #928374
4068! DarkRed + Red
4069*color1: #cc241d
4070*color9: #fb4934
4071! DarkGreen + Green
4072*color2: #98971a
4073*color10: #b8bb26
4074! DarkYellow + Yellow
4075*color3: #d79921
4076*color11: #fabd2f
4077! DarkBlue + Blue
4078*color4: #458588
4079*color12: #83a598
4080! DarkMagenta + Magenta
4081*color5: #b16286
4082*color13: #d3869b
4083! DarkCyan + Cyan
4084*color6: #689d6a
4085*color14: #8ec07c
4086! LightGrey + White
4087*color7: #a89984
4088*color15: #ebdbb2
4089#+end_src
4090
4091#+begin_src conf-xdefaults :tangle no
4092! -----------------------------------------------------------------------------
4093! File: gruvbox-urxvt256.xresources
4094! Description: Retro groove colorscheme generalized
4095! Author: morhetz <morhetz@gmail.com>
4096! Source: https://github.com/morhetz/gruvbox-generalized
4097! Last Modified: 13 Dec 2013
4098! -----------------------------------------------------------------------------
4099
4100URxvt.color24: #076678
4101URxvt.color66: #427b58
4102URxvt.color88: #9d0006
4103URxvt.color96: #8f3f71
4104URxvt.color100: #79740e
4105URxvt.color108: #8ec07c
4106URxvt.color109: #83a598
4107URxvt.color130: #af3a03
4108URxvt.color136: #b57614
4109URxvt.color142: #b8bb26
4110URxvt.color167: #fb4934
4111URxvt.color175: #d3869b
4112URxvt.color208: #fe8019
4113URxvt.color214: #fabd2f
4114URxvt.color223: #ebdbb2
4115URxvt.color228: #f2e5bc
4116URxvt.color229: #fbf1c7
4117URxvt.color230: #f9f5d7
4118URxvt.color234: #1d2021
4119URxvt.color235: #282828
4120URxvt.color236: #32302f
4121URxvt.color237: #3c3836
4122URxvt.color239: #504945
4123URxvt.color241: #665c54
4124URxvt.color243: #7c6f64
4125URxvt.color244: #928374
4126URxvt.color245: #928374
4127URxvt.color246: #a89984
4128URxvt.color248: #bdae93
4129URxvt.color250: #d5c4a1
4130#+end_src
4131
4132***** emacs
4133:PROPERTIES:
4134:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4135:END:
4136
4137#+begin_src conf-xdefaults
4138Emacs.menuBar: off
4139Emacs.toolBar: off
4140Emacs.verticalScrollBars: off
4141Emacs.cursorBlink: off
4142Emacs.FontBackend: xft,x
4143! Emacs.font: Ubuntu Mono-12
4144! Emacs.font: Triplicate T4C-11
4145! Emacs.font: Ubuntu Mono-10.5
4146! Emacs.font: Ubuntu Mono-12
4147! Emacs.font: Iosevka-11
4148
4149! Emacs.font: Fira Mono:size=15
4150! Emacs.font: DejaVu Sans Mono:size=15
4151! Emacs.font: Inconsolata:size=17
4152! Emacs.font: Inconsolata:size=16
4153! Emacs.font: Inconsolata LGC:size=14
4154! Emacs.font: Source Code Pro Medium-10.5
4155Emacs.font: Ubuntu Mono:size=16
4156! Emacs.font: Iosevka:size=16
4157#+end_src
4158
4159***** rxvt-unicode
4160:PROPERTIES:
4161:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4162:END:
4163
4164#+begin_src conf-xdefaults
4165! Font
4166URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4167URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4168URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4169URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4170
4171URxvt.xftAntialias: true
4172URxvt.letterSpace: 0
4173
4174URxvt.depth: 0
4175URxvt.loginShell: true
4176URxvt.saveLines: 100000
4177URxvt.internalBorder: 3
4178URxvt.lineSpace: 0
4179URxvt.scrollBar: false
4180URxvt.scrollStyle: rxvt
4181URxvt*scrollTtyOutput: false
4182URxvt*scrollWithBuffer: true
4183URxvt*scrollTtyKeypress: true
4184URxvt.keysym.Shift-Up: command:\033]720;1\007
4185URxvt.keysym.Shift-Down: command:\033]721;1\007
4186
4187URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4188URxvt.perl-ext: bidi
4189URxvt.bidi.enabled: 1
4190URxvt.url-select.launcher: firefox
4191URxvt.url-select.underline: true
4192URxvt.keysym.M-u: perl:url-select:select_next
4193URxvt.keysym.M-Escape: perl:keyboard-select:activate
4194URxvt.keysym.M-s: perl:keyboard-select:search
4195URxvt.url-launcher: /usr/bin/firefox
4196URxvt.matcher.button: 1
4197URxvt.iso14755: false
4198URxvt.iso14755_53: false
4199URxvt.keysym.M-c: perl:clipboard:copy
4200URxvt.keysym.M-v: perl:clipboard:paste
4201URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4202URxvt.keysym.C-Up: font-size:increase
4203URxvt.keysym.C-Down: font-size:decrease
4204URxvt.keysym.C-S-Up: font-size:incglobal
4205URxvt.keysym.C-S-Down: font-size:decglobal
4206URxvt.keysym.C-equal: font-size:reset
4207!URxvt.keysym.C-question: font-size:show
4208
4209URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4210
4211!urxvt*foreground: white
4212!urxvt*background: black
4213
4214!*color0: #2E3436
4215!*color1: #a40000
4216!*color2: #4E9A06
4217!*color3: #C4A000
4218!*color4: #3465A4
4219!*color5: #75507B
4220!*color6: #ce5c00
4221!*color7: #babdb9
4222!*color8: #555753
4223!*color9: #EF2929
4224!*color10: #8AE234
4225!*color11: #FCE94F
4226!*color12: #729FCF
4227!*color13: #AD7FA8
4228!*color14: #fcaf3e
4229!*color15: #EEEEEC
4230
4231!URxvt.foreground: #C8C8C8
4232!URxvt.background: #FFFFFF
4233
4234!! black
4235!*color0: #2E3436
4236!*color8: #555753
4237!! red
4238!*color1: #a40000
4239!*color9: #EF2929
4240!! green
4241!*color2: #4E9A06
4242!*color10: #8AE234
4243!! yellow
4244!*color3: #C4A000
4245!*color11: #FCE94F
4246!! blue
4247!*color4: #3465A4
4248!*color12: #729FCF
4249!! purple
4250!*color5: #75507B
4251!*color13: #AD7FA8
4252!! orange (replaces cyan)
4253!*color6: #ce5c00
4254!*color14: #fcaf3e
4255!! white
4256!*color7: #babdb9
4257!*color15: #EEEEEC
4258
4259! Tango colour theme for rxvt-unicode
4260URxvt.background: #FFFFFF
4261URxvt.foreground: #000000
4262
4263! Black
4264URxvt.color0: #2E3436
4265URxvt.color8: #757773
4266
4267! Red
4268URxvt.color1: #CC0000
4269URxvt.color9: #EF2929
4270
4271! Green
4272URxvt.color2: #4E9A06
4273URxvt.color10: #8AE234
4274
4275! Yellow
4276URxvt.color3: #C4A000
4277URxvt.color11: #FCE94F
4278
4279! Blue
4280URxvt.color4: #3465A4
4281URxvt.color12: #729FCF
4282
4283! Magenta
4284URxvt.color5: #75507B
4285URxvt.color13: #AD7FA8
4286
4287!! Cyan
4288!URxvt.color6: #06989A
4289!URxvt.color14: #34E2E2
4290! orange (replaces cyan)
4291*color6: #ce5c00
4292*color14: #fcaf3e
4293
4294! White
4295URxvt.color7: #D3D7CF
4296URxvt.color15: #EEEEEC
4297#+end_src
4298
69a6fe26
AB
4299** XDG
4300:PROPERTIES:
4301:header-args+: :tangle ~/.config/user-dirs.dirs
4302:END:
4303
4304#+begin_src conf
4305XDG_DESKTOP_DIR="$HOME/Desktop"
4306XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4307XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4308XDG_MUSIC_DIR="$HOME/usr/music"
4309XDG_PICTURES_DIR="$HOME/usr/pics"
4310XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4311XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4312XDG_VIDEOS_DIR="$HOME/usr/vids"
4313#+end_src
4314
4315** Zathura
4316:PROPERTIES:
4317:header-args+: :tangle ~/.config/zathura/zathurarc
4318:END:
4319
4320#+begin_src conf
4321set smooth-scroll true
4322set selection-clipboard clipboard
4323set zoom-step 05
4324set default-bg "#272727"
4325set statusbar-bg "#272727"
4326set inputbar-bg "#373737"
4327#+end_src
4328
b1f6f894
AB
4329** Zsh
4330
4331My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4332[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4333installed.
4334
4335*** zimrc
4336:PROPERTIES:
4337:header-args+: :tangle ~/.zimrc
4338:END:
4339
4340#+begin_src sh
4341
4342
4343#################
4344# CORE SETTINGS #
4345#################
4346
4347#
4348# Zim settings
4349#
4350
4351# Select what modules you would like enabled.
4352# The second line of modules may depend on options set by modules in the first
4353# line. These dependencies are noted on the respective module's README.md.
4354zmodules=(directory environment git git-info history input ssh utility custom \
4355 syntax-highlighting history-substring-search prompt completion)
4356
4357
4358###################
4359# MODULE SETTINGS #
4360###################
4361
4362#
4363# Prompt
4364#
4365
4366# Set your desired prompt here
4367zprompt_theme='pure'
4368#PURE_PROMPT_SYMBOL=λ
4369#PURE_PROMPT_SYMBOL=δ
4370PURE_PROMPT_SYMBOL=➜
4371
4372#
4373# Completion
4374#
4375
4376# set an optional host-specific filename for the completion cache file
4377# if none is provided, the default '.zcompdump' is used.
4378#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4379
4380#
4381# Utility
4382#
4383
4384# Uncomment to enable command correction prompts
4385# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4386setopt CORRECT
4387
4388#
4389# Environment
4390#
4391
4392# Set the string below to the desired terminal title format string.
4393# The terminal title is redrawn upon directory change, however, variables like
4394# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4395# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4396# The example below uses the following format: 'username@host:/current/directory'
4397ztermtitle='%n@%m:%~'
4398
4399#
4400# Input
4401#
4402
4403# Uncomment to enable double-dot expansion.
4404# This appends '../' to your input for each '.' you type after an initial '..'
4405#zdouble_dot_expand='true'
4406
4407#
4408# Syntax-Highlighting
4409#
4410
4411# This determines what highlighters will be used with the syntax-highlighting module.
4412# Documentation of the highlighters can be found here:
4413# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4414# For (u)rxvt, termite and gnome-terminal users,
4415# removing the 'cursor' highlighter will fix the disappearing cursor problem
4416#zhighlighters=(main brackets cursor)
4417zhighlighters=(main brackets pattern)
4418
4419
4420#
4421# SSH
4422#
4423
4424# Load these ssh identities with the ssh module
4425zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4426
4427
4428#
4429# Pacman
4430#
4431
4432# Set (optional) pacman front-end.
4433zpacman_frontend='yay'
4434
4435# Load any helper scripts as defined here
4436#zpacman_helper=(aur)
4437#+end_src
4438
4439*** zlogin
4440:PROPERTIES:
4441:header-args+: :tangle ~/.zlogin
4442:END:
4443
4444#+begin_src sh
4445
4446
4447#
4448# User configuration sourced by login shells
4449#
4450
4451# Initialize zim
4452[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4453#+end_src
4454
4455*** zprofile
4456:PROPERTIES:
4457:header-args+: :tangle ~/.zprofile
4458:END:
4459
4460#+begin_src sh
4461#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4462#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
50fff474 4463export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
b1f6f894
AB
4464export XDG_CONFIG_HOME=$HOME/.config
4465export XDG_DATA_HOME=$HOME/.local/share
4466export XDG_DATA_DIRS=/usr/local/share:/usr/share
4467export MAILDIR="$HOME/mail"
4468export CVS_RSH=ssh
4469#export MATHMODELS=$HOME/src/eiffel/mathmodels
4470#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4471#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4472
4473# Eiffel2Java stuff
4474#export JAVA_HOME=/usr/lib/jvm/default
4475#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4476#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4477#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4478
4479#export PATH="$HOME/usr/build/pvs:$PATH"
4480#export SBCLISP_HOME=/usr/share/sbcl-source
4481#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4482
4483export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4484
4485#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4486#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4487
88bb4858 4488if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
b1f6f894
AB
4489#+end_src
4490
4491*** zshenv
4492:PROPERTIES:
4493:header-args+: :tangle ~/.zshenv
4494:END:
4495
4496#+begin_src sh
4497# Ensure that a non-login, non-interactive shell has a defined environment.
4498if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4499 source "${ZDOTDIR:-$HOME}/.zprofile"
4500fi
4501#+end_src
4502
4503*** zshrc
4504:PROPERTIES:
4505:header-args+: :tangle ~/.zshrc
4506:END:
4507
4508#+begin_src sh
4509# Bash-like navigation
4510#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4511#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4512export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4513#ZLE_SPACE_SUFFIX_CHARS=$'|&'
4514
4515#disable -r time # disable shell reserved word
4516#alias time='time -p' # -p for POSIX output
4517
4518# rehash if last command was pacaur or pacman
4519# (so that zsh picks up changes in $PATH immediately)
4520TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4521
4522#
4523# User configuration sourced by interactive shells
4524#
4525
4526# Change default zim location
4527export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4528
4529# Start zim
4530[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4531
4532ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4533#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4534
4535setopt globdots
4536
4537source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4538source ~/.zsh/zsh-autopair/autopair.zsh
4539
4540
4541### fzf ###
4542
4543source /usr/share/fzf/key-bindings.zsh
4544source /usr/share/fzf/completion.zsh
4545
4546# Accept history selection instead of putting it on
4547# the command line
4548fzf-history-widget-accept() {
4549 fzf-history-widget
4550 zle accept-line
4551}
4552#zle -N fzf-history-widget-accept
4553#bindkey '^R' fzf-history-widget-accept
4554
4555# alt+c preview
4556export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4557
4558### fzf ###
4559
4560
4561# aliases
4562alias mpv="mpv --ytdl-format mp4"
4563alias mv="mv -iv"
4564alias cp="cp -iv"
4565alias scl=systemctl
4566alias jcl=journalctl
4567alias m="mbsync -Va; getmail; notmuch new"
4568alias best="youtube-dl -f best"
2a1be6b4 4569alias nixx="ssh amin@nix.aminb.org"
373a060a 4570alias fence="ssh aminb@fencepost.gnu.org"
b1f6f894
AB
4571
4572aur() {
4573 cd ~/usr/build
4574 git clone https://aur.archlinux.org/${1}.git
4575 cd ${1}
4576}
4577
4578# i-beam cursor
4579echo -e "\033[5 q"
4580#echo -e "\033[6 q"
4581#+end_src
4582
b13e2dc1
AB
4583* Scripts
4584
4585This section contains various useful scripts and the ones used by the
4586programs above. For instance, =toggle-tablet= for switching to and
4587from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4588Xfce's presentation mode which keeps the screen awake, and
4589=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4590exact brightness value.
4591
4592** rofi-light
4593:PROPERTIES:
4594:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4595:END:
4596
33c5a5cd 4597#+begin_src bash
b13e2dc1 4598cur=$(light -G)
c2ce9b12 4599val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
b13e2dc1
AB
4600light -S $val
4601#+end_src
4602
4603** toggle-layout
4604:PROPERTIES:
4605:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4606:END:
4607
33c5a5cd 4608#+begin_src bash
b13e2dc1
AB
4609lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4610
4611if [ "$lang" = "us" ]; then
4612 setxkbmap ir
4613else
4614 setxkbmap us
4615 # xmodmap $HOME/.Xmodmap
4616fi
4617#+end_src
4618
4619** toggle-presentation-mode
4620:PROPERTIES:
4621:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4622:END:
4623
33c5a5cd 4624#+begin_src bash
b13e2dc1
AB
4625xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4626#+end_src
33c5a5cd 4627
72f329ba
AB
4628** toggle-tablet
4629:PROPERTIES:
4630:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4631:END:
4632
4633This script toggles between a 'normal' mode and a 'tablet' mode, doing
4634a few things:
4635
4636- rotates the screen using =xrandr=, so that rotating the physical
4637 display of my X220t would have the laptop's battery on the right
4638 hand side,
4639- enables touch screen,
4640- properly rotates the stylus pen and touch screen pointers, and
4641- toggles between RGB and Vertical BGR sub-pixel order.
4642
4643#+begin_src bash
4644case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4645 0) # Screen is not rotated, we should rotate it right (90°)
4646 xrandr -o 3
4647 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4648 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4649 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4650 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4651 ;;
4652 1) # Currently top is rotated right, we should set it normal (0°)
4653 xrandr -o 0
4654 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4655 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4656 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4657 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4658 ;;
4659 *)
4660 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4661 exit 1
4662 ;;
4663esac
4664#+end_src
4665
2e877d14
AB
4666** unlock-def-gk.py
4667:PROPERTIES:
4668:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4669:END:
4670
4671#+begin_src python
4672import gnomekeyring as gk
4673# list_item_ids_sync('login')[0] == 1L
4674gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4675#+end_src
4676
4f183f2a
AB
4677** wp
4678
4679My little wallpaper changer script.
4680
4681*** wp
4682:PROPERTIES:
4683:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4684:END:
4685
4686#+begin_src bash :tangle no
4687export DISPLAY=:0
4688
4689case "$1" in
4690 "day")
4691 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4692 ;;
4693 "night")
4694 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4695 ;;
4696 *)
4697 echo $"Usage: $0 {day|night}"
4698 exit 1
4699esac
4700#+end_src
4701
4702*** wp-auto
4703:PROPERTIES:
4704:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4705:END:
4706
4707#+begin_src bash :tangle no
4708SED=$(which sed)
4709ROFI=$(which rofi)
4710
4711export DISPLAY=:0
4712HOUR=$(date +%H)
4713
4714if [ -z "${SED}" ]
4715then
4716 echo "Did not find 'sed', script cannot continue."
4717 exit 1
4718fi
4719if [ -z "${ROFI}" ]
4720then
4721 echo "Did not find rofi, there is no point to continue."
4722 exit 1
4723fi
4724
4725###
4726# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4727# Repeated calls should leave the config clean-ish
4728###
4729function set_theme()
4730{
4731 CDIR="${HOME}/.config/rofi/"
4732 if [ ! -d "${CDIR}" ]
4733 then
4734 mkdir -p ${CDIR}
4735 fi
4736 if [ -f "${CDIR}/config" ]
4737 then
4738 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4739 fi
4740 echo "rofi.theme: ${1}" >> "${CDIR}/config"
4741
4742}
4743
4744if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4745 then
4746 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4747 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4748 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4749 else
4750 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4751 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4752 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4753fi
4754#+end_src
4755
4756*** wp.service
4757:PROPERTIES:
4758:header-args+: :tangle ~/.config/systemd/user/wp.service
4759:END:
4760
4761#+begin_src conf :tangle no
4762[Unit]
4763Description=wallpaper service
4764
4765[Service]
4766Type=oneshot
4767ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4768#+end_src
4769
4770*** wp.timer
4771:PROPERTIES:
4772:header-args+: :tangle ~/.config/systemd/user/wp.timer
4773:END:
4774
4775#+begin_src conf :tangle no
4776[Unit]
4777[Unit]
4778Description=wallpaper timer
4779
4780[Timer]
4781OnCalendar=07,21:00
4782Unit=wp.service
4783Persistent=true
4784
4785[Install]
4786WantedBy=timers.target
4787#+end_src
4788
69a6fe26
AB
4789** zathura-sync.sh
4790:PROPERTIES:
4791:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
4792:END:
4793
4794#+begin_src sh
4795pos="$1"
4796pdffile="$2"
4797zathura --synctex-forward "$pos" "$pdffile" || \
4798 (
4799 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
4800 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
4801#+end_src
33c5a5cd
AB
4802** Fun :)
4803
4804*** eat-em
4805:PROPERTIES:
4806:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
4807:END:
4808
4809#+begin_src sh
4810# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4811# [ESC] character in original post removed here.
4812
4813# ANSI Color -- use these variables to easily have different color
4814# and format output. Make sure to output the reset sequence after
4815# colors (f = foreground, b = background), and use the 'off'
4816# feature for anything you turn on.
4817
4818initializeANSI()
4819{
4820 esc="$(echo -en '\e')"
4821
4822 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
4823 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
4824 cyanf="${esc}[36m"; whitef="${esc}[37m"
4825
4826 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
4827 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
4828 cyanb="${esc}[46m"; whiteb="${esc}[47m"
4829
4830 boldon="${esc}[1m"; boldoff="${esc}[22m"
4831 italicson="${esc}[3m"; italicsoff="${esc}[23m"
4832 ulon="${esc}[4m"; uloff="${esc}[24m"
4833 invon="${esc}[7m"; invoff="${esc}[27m"
4834
4835 reset="${esc}[0m"
4836}
4837
4838# note in this first use that switching colors doesn't require a reset
4839# first - the new color overrides the old one.
4840
4841#clear
4842
4843initializeANSI
4844
4845cat << EOF
4846
4847 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
4848 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4849 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4850 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
4851 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
4852 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
4853
4854 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
4855 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4856 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4857 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
4858 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
4859 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
4860
4861EOF
4862#+end_src
4863
33c5a5cd
AB
4864*** invade-em
4865:PROPERTIES:
4866:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
4867:END:
4868
4869#+begin_src bash
4870#
4871# ANSI color scheme script featuring Space Invaders
4872#
4873# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4874# Modified by lolilolicon
4875#
4876
4877f=3 b=4
4878for j in f b; do
4879 for i in {0..7}; do
4880 printf -v $j$i %b "\e[${!j}${i}m"
4881 done
4882done
4883bld=$'\e[1m'
4884rst=$'\e[0m'
4885
4886cat << EOF
4887
4888 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4889 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4890 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
4891 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
4892
4893 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4894 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4895 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
4896 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
4897
4898
4899 $f7▌$rst
4900
4901 $f7▌$rst
4902
4903 $f7 ▄█▄ $rst
4904 $f7▄█████████▄$rst
4905 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
4906
4907EOF
4908#+end_src