[emacs/lean-mode] use forward slash "/" as the prefix for lean-input
[~bandali/configs] / rc.org
CommitLineData
08146d0e
AB
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
b13e2dc1
AB
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
b13e2dc1
AB
17** bspwm
18
19*** bspwmrc
20:PROPERTIES:
21:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22:END:
23
fb52d1f9 24#+begin_src sh :tangle no
b13e2dc1
AB
25sxhkd &
26sh ~/.fehbg &
27xfce4-panel -d &
87af8efd 28compton &
b13e2dc1
AB
29sleep 0.5 && pasystray --notify=all &
30
31bspc monitor -d I II III IV V VI VII VIII IX X
32#bspc monitor eDP-1 -d I II III IV V
33#bspc monitor HDMI-1 -d VI VII VIII IX X
34
35#bspc config border_width 2
36#bspc config window_gap 8
37bspc config window_gap 0
38
39bspc config bottom_padding 26
40
41bspc config split_ratio 0.52
42bspc config borderless_monocle true
43bspc config gapless_monocle true
44bspc config click_to_focus button1
45bspc config directional_focus_tightness low
46
87af8efd 47#bspc rule -a Firefox desktop='^1' follow=on
b13e2dc1
AB
48bspc rule -a Nightly desktop='^1' follow=on
49bspc rule -a Emacs desktop='^2' state=tiled follow=on
50#bspc rule -a Chromium desktop='^4' follow=on
51bspc rule -a URxvt state=floating
52bspc rule -a URxvt:tiled state=tiled
53bspc rule -a Connman-gtk state=floating
54bspc rule -a Xfce4-panel state=floating
55bspc rule -a TelegramDesktop state=floating
56bspc rule -a Ec state=floating
57bspc rule -a Pavucontrol state=floating
58bspc rule -a Eog state=floating
59bspc rule -a Seahorse state=floating
60bspc rule -a mpv state=floating
61bspc rule -a Evince state=floating
62bspc rule -a Meld state=floating
63bspc rule -a Autokey-gtk state=floating
64bspc rule -a Mousepad state=floating
65bspc rule -a Wrapper-1.0 state=floating
66bspc rule -a File-roller state=floating
67bspc rule -a Gnome-disks state=floating
68bspc rule -a Termite state=floating
69bspc rule -a Termite:tiled state=tiled
70bspc rule -a Thunderbird:Calendar state=floating
71bspc rule -a Audacity state=floating
72bspc rule -a Proof state=floating # pvs x-show-proof
73bspc rule -a Nm-connection-editor state=floating
74bspc rule -a Wire state=floating
75bspc rule -a discord state=floating
76bspc rule -a X2goclient state=floating
77bspc rule -a SimpleScreenRecorder state=floating
78bspc rule -a Gimp state=floating
79bspc rule -a Wrapper-2.0 state=floating
80bspc rule -a Zathura state=tiled
81#+end_src
82
83*** sxhkdrc
84:PROPERTIES:
85:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86:END:
87
fb52d1f9 88#+begin_src conf :tangle no
b13e2dc1
AB
89#
90# wm independent hotkeys
91#
92
93# terminal emulator
94super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97#super + {_,shift} + Return
98# termite{_, --name=tiled}
99
100# program launcher
101super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104super + alt + space
105 xfce4-popup-whiskermenu
106
107# window finder
108super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111# password manager
112alt + space
113 rofi-pass
114
115# firefox
116#super + r
117# firefox
118
119# chromium
120#super + c
121# chromium -incognito
122
123# emacs
124super + e
125 emacs
126
127# make sxhkd reload its configuration files:
128super + Escape
129 pkill -USR1 -x sxhkd
130
131# volume {up,down}
132XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135# mute
136XF86AudioMute
137 pamixer --toggle-mute
138
373a060a
AB
139XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
b13e2dc1
AB
142# playback control
143XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146# lock the screen
147super + shift + q
148 light-locker-command -l
149
150# Toggle keyboard layout
151super + F7
152 toggle-layout
153
154# Toggle Xfce presentation mode
155XF86LaunchB
156 toggle-presentation-mode
157
158# monitor brightness
159XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162super + apostrophe
163 rofi-light
164
165# keyboard brightness
166#XF86KbdBrightness{Up,Down}
167# kbdlight {up,down}
168
72f329ba
AB
169XF86RotateWindows
170 toggle-tablet
171
b13e2dc1
AB
172#
173# bspwm hotkeys
174#
175
176# quit bspwm normally
177super + alt + Escape
178 bspc quit
179
180# close and kill
181super + {w,q}
182 bspc node -{c,k}
183
184# alternate between the tiled and monocle layout
185super + m
186 bspc desktop -l next
187
188# send the newest marked node to the newest preselected node
189super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192# swap the current node and the biggest node
193super + g
194 bspc node -s biggest
195
196#
197# state/flags
198#
199
200# set the window state
201super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204# set the node flags
205super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208#
209# focus/swap
210#
211
212# focus the node in the given direction
213super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216# focus the node for the given path jump
217super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220# focus the next/previous node in the current desktop
221super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224# focus the next/previous desktop in the current monitor
225super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228# send to next/prev desktop
229super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232# focus the last node/desktop
233super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236# focus the older or newer node in the focus history
237super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242# focus or send to the given desktop
243super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246#
247# preselect
248#
249
250# preselect the direction
251super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254# preselect the ratio
255super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258# cancel the preselection for the focused node
259super + ctrl + space
260 bspc node -p cancel
261
262# cancel the preselection for the focused desktop
263super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266#
267# move/resize
268#
269
270# expand a window by moving one of its side outward
271super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274# contract a window by moving one of its side inward
275super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278# move a floating window
279super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282#alt + bracket{left,right}
283# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284#+end_src
285
286** compton
287:PROPERTIES:
288:header-args+: :tangle ~/.config/compton.conf
289:END:
290
fb52d1f9 291#+begin_src conf :tangle no
b13e2dc1
AB
292# Shadow
293shadow = false; # Enabled client-side shadows on windows.
294no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295no-dnd-shadow = true; # Don't draw shadows on DND windows.
296clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298shadow-radius = 5; # The blur radius for shadows. (default 12)
299shadow-offset-x = -5; # The left offset for shadows. (default -15)
300shadow-offset-y = -5; # The top offset for shadows. (default -15)
301# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306# shadow-exclude = "n:e:Notification";
307#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311# Opacity
312menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323# blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326# blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332# Fading
333fading = false; # Fade windows during opacity changes.
334fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338fade-exclude = [ ]; # Exclude conditions for fading.
339
340# Other
341backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355dbe = false; # Enable DBE painting mode. Rarely needed.
356paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368# GLX backend # GLX backend fine-tune options. See man page for more info.
369glx-no-stencil = true; # Recommended.
370glx-copy-from-front = false; # Useful with --glx-swap-method,
371# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372# glx-no-rebind-pixmap = true; # Recommended if it works.
373glx-no-rebind-pixmap = true; # Recommended if it works.
374#glx-swap-method = "4"; # See man page.
375glx-swap-method = "4"; # See man page.
376
377# Window type settings
378wintypes:
379{
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389};
390#+end_src
391
6b6a22a2
AB
392** dovecot
393:PROPERTIES:
394:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
395:END:
396
397#+begin_src conf
398protocols = imap
399
400listen = 127.0.0.1
401log_path = /var/log/dovecot.log
402info_log_path = /var/log/dovecot-info.log
403
404ssl = no
405disable_plaintext_auth = no
406
407auth_verbose = yes
408auth_mechanisms = plain
409
410passdb {
411 driver = passwd-file
412 args = /etc/dovecot/passwd
413}
414
415userdb {
416 driver = static
417 args = uid=amin gid=amin home=/home/amin/mail/%d/%n
418 default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
419}
420
421# mail_home = /home/amin/mail/%d/%n
422# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
423
424# namespace {
425# inbox = yes
426# separator = /
427# }
428
2f6c1652 429mail_plugins = $mail_plugins fts fts_lucene
6b6a22a2 430
2f6c1652
AB
431plugin {
432 fts = lucene
433 fts_lucene = whitespace_chars=@.
434 fts_autoindex = yes
435}
6b6a22a2
AB
436#+end_src
437
05ab13aa
AB
438** Dunst
439:PROPERTIES:
440:header-args+: :tangle ~/.config/dunst/dunstrc
441:END:
442
443#+begin_src conf
444[global]
445#font = Ubuntu Mono 10.5
446font = Inconsolata 11
447
448# Path to default icons.
449icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
450
451icon_position = left
452# <b>bold</b>
453# <i>italic</i>
454# <s>strikethrough<s/>
455# <u>underline</u>
456markup = full
457# The format of the message. Possible variables are:
458# %a appname
459# %s summary
460# %b body
461# %i iconname (including its path)
462# %I iconname (without its path)
463# %p progress value if set ([ 0%] to [100%]) or nothing
464# Markup is allowed
465format = "<b>%s</b>\n%b"
466# Sort messages by urgency
467sort = yes
468# Show how many messages are currently hidden (because of geometry)
469indicate_hiddenl= no
470# Alignment of message text.
471# Possible values are "left", "center" and "right"
472alignment = center
473# The frequency with wich text that is longer than the notification
474# window allows bounces back and forth.
475# This option conflicts with 'word_wrap'.
476# Set to 0 to disable
477bounce_freq = 3
478# show age of message if message is older than show_age_threshold seconds.
479# set to -1 to disable
480show_age_threshold = -1
481# split notifications into multiple lines if they don't fit into geometry
482word_wrap = yes
483# ignore newlines '\n' in notifications
484ignore_newline = no
485# The geometry of the message window.
486# geometry [{width}]x{height}][+/-{x}+/-{y}]
487# The height is measured in number of notifications everything else in pixels. If the width
488# is omitted but the height is given ("-geometry x2"), the message window
489# expands over the whole screen (dmenu-like). If width is 0,
490# the window expands to the longest message displayed.
491# A positive x is measured from the left, a negative from the
492# right side of the screen. Y is measured from the top and down respectevly.
493# The width can be negative. In this case the actual width is the
494# screen width minus the width defined in within the geometry option.
495#geometry = "410x12-12+12"
496#geometry = "0x0-30-30"
497geometry = "260x12-30-30"
498# The transparency of the window. range: [0; 100]
499# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
500transparency = 0
501# Don't remove messages, if the user is idle (no mouse or keyboard input)
502# for longer than idle_threshold seconds.
503# Set to 0 to disable.
504idle_threshold = 120
505# Which monitor should the notifications be displayed on.
506monitor = 0
507# Display notification on focused monitor. Possible modes are:
508# mouse: follow mouse pointer
509# keyboard: follow window with keyboard focus
510# none: don't follow anything
511#
512# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
513# This should be the case for almost all modern windowmanagers.
514#
515# If this option is set to mouse or keyboard, the monitor option will be
516# ignored.
517follow = keyboard
518# should a notification popped up from history be sticky or
519# timeout as if it would normally do.
520sticky_history = yes
521# The height of a single line. If the height is smaller than the font height,
522# it will get raised to the font height.
523# This adds empty space above and under the text.
524line_height = 0
525
526show_indicators = yes
527
528# Draw a line of 'separatpr_height' pixel height between two notifications.
529# Set to 0 to disable
530separator_height = 3
531# padding between text and separator
532padding = 8
533# horizontal padding
534horizontal_padding = 8
535# Define a color for the separator.
536# possible values are:
537# * auto: dunst tries to find a color fitting to the background
538# * foreground: use the same color as the foreground
539# * frame: use the same color as the frame.
540# * anything else will be interpreted as a X color
541separator_color = foreground
542# print a notification on startup
543# This is mainly for error detection, since dbus (re-)starts dunst
544# automatically after a crash.
545startup_notification = false
546# dmenu path
547#dmenu = /usr/bin/dmenu -p dunst:
548dmenu = /usr/bin/rofi -dmenu -p dunst:
549# browser for opening urls in context menu
550browser = /usr/bin/firefox -new-tab
551[frame]
552width = 0
553color = "#377222"
554[shortcuts]
555# shortcuts are specified as [modifier+][modifier+]...key
556# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
557# and 'mod4' (windows-key)
558# xev might be helpful to find names for keys
559# close notification
560close = ctrl+space
561# close all notifications
562close_all = ctrl+shift+space
563# redisplay last message(s)
564# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
565history = ctrl+shift+h
566# context menu
567context = ctrl+shift+period
568[urgency_low]
569# IMPORTANT: colors have to be defined in quotation marks.
570# Otherwise the '#' and following would be interpreted as a comment.
571background = "#1d2a30"
572foreground = "#71c2af"
573timeout = 3
574[urgency_normal]
575background = "#1d2a30"
576foreground = "#71c2af"
577timeout = 0
578[urgency_critical]
579background = "#1d2a30"
580foreground = "#ff9982"
581timeout = 0
582
583# Every section that isn't one of the above is interpreted as a rules
584# to override settings for certain messages.
585# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
586# and you can override the 'timeout', 'urgency', 'foreground', 'background'
587# and 'format'.
588# Shell-like globbing will get expanded.
589#
590# SCRIPTING
591# you can specify a script that gets run when the rule matches by setting
592# the 'script' option.
593# The script will be called as follows:
594# script appname summary body icon urgency
595# where urgency can be "LOW", "NORMAL" or "CRITICAL".
596#
597# NOTE: if you don't want a notification to be displayed, set the format to ""
598# NOTE: It might be helpful to run dunst -print in a terminal in order to find
599# fitting options for rules.
600#[espeak]
601# summary = "*"
602# script = dunst_espeak.sh
603#[script-test]
604# summary = "*script*"
605# script = dunst_test.sh
606#[ignore]
607## This notification will not be displayed
608# summary = "foobar"
609# format = ""
610#[signed_on]
611# appname = Pidgin
612# summary = "*signed on*"
613# urgency = low
614#
615#[signed_off]
616# appname = Pidgin
617# summary = *signed off*
618# urgency = low
619#
620#[says]
621# appname = Pidgin
622# summary = *says*
623# urgency = critical
624#
625#[twitter]
626# appname = Pidgin
627# summary = *twitter.com*
628# urgency = normal
629#
630[xfpm-backlight]
631 summary = *Brightness*
632 urgency = low
633#+end_src
634
635** Fontconfig
636:PROPERTIES:
45d84997 637:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
05ab13aa
AB
638:END:
639
640#+begin_src xml
641<?xml version="1.0"?>
642<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
643<fontconfig>
644 <match target="font">
645 <edit mode="assign" name="rgba">
646 <const>rgb</const>
647 </edit>
648 </match>
649 <match target="font">
650 <edit mode="assign" name="hinting">
651 <bool>true</bool>
652 </edit>
653 </match>
654 <match target="font">
655 <edit mode="assign" name="hintstyle">
656 <const>hintslight</const>
657 </edit>
658 </match>
659 <match target="font">
660 <edit mode="assign" name="antialias">
661 <bool>true</bool>
662 </edit>
663 </match>
664 <match target="font">
665 <edit mode="assign" name="lcdfilter">
666 <const>lcddefault</const>
667 </edit>
668 </match>
669 <dir>~/.fonts</dir>
670
671 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
672 <alias binding="same">
673 <family>Helvetica</family>
75f8530e 674 <prefer>
05ab13aa 675 <family>Liberation Sans</family>
75f8530e 676 </prefer>
05ab13aa
AB
677</alias>
678</fontconfig>
679#+end_src
680
a106372e
AB
681** getmail
682
683*** getmailrc
684:PROPERTIES:
685:header-args+: :tangle ~/.getmail/getmailrc
686:END:
687
688#+begin_src conf
689[retriever]
690type = SimplePOP3SSLRetriever
691server = fencepost.gnu.org
b003853f 692username = bandali
a106372e
AB
693password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
694port = 995
695use_apop = True
696
697[destination]
698type = Maildir
699path = ~/mail/gnu/Inbox/
700
701[options]
702delete = True
703#+end_src
704
705*** getmail.service
706:PROPERTIES:
707:header-args+: :tangle ~/.config/systemd/user/getmail.service
708:END:
709
710#+begin_src conf :tangle no
711[Unit]
712Description=getmail service
713
714[Service]
715Type=oneshot
716ExecStart=/usr/bin/getmail
717StandardOutput=syslog
718StandardError=syslog
719#+end_src
720
721*** getmail.timer
722:PROPERTIES:
723:header-args+: :tangle ~/.config/systemd/user/getmail.timer
724:END:
725
726#+begin_src conf :tangle no
727[Unit]
728Description=getmail timer
729
730[Timer]
731OnCalendar=*:0/30
732Persistent=true
733Unit=getmail.service
734
735[Install]
736WantedBy=timers.target
737#+end_src
738
58cbbce2 739** Git
08146d0e
AB
740
741*** gitconfig
742:PROPERTIES:
743:header-args+: :tangle ~/.gitconfig
744:END:
745
746**** user
747#+begin_src conf
748[user]
749 name = Amin Bandali
05675ca4
AB
750 email = bandali@gnu.org
751 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
08146d0e
AB
752#+end_src
753
754**** signing
755#+begin_src conf
5c7c14c7
AB
756[commit]
757 gpgsign = true
08146d0e
AB
758# [format]
759# signoff = true
760#+end_src
761
762**** core
763#+begin_src conf
764[core]
765 autocrlf = input # CRLF -> LF on commit
766 editor = emacsclient -t
767 excludesfile = ~/.gitignore_global
768 pager = "less"
769#+end_src
770
771**** gpg
772#+begin_src conf
773[gpg]
774 program = gpg2
775#+end_src
776
777**** alias
778#+begin_src conf
779[alias]
780 git = !exec git # handle nested git calls, e.g. git git status
781 aliases = config --get-regexp '^alias\\.'
782 a = add
783 s = status
784 sl = status --long
785 c = checkout
786 cb = checkout -b
787 b = branch
788 r = rebase
789 p = pull
790 pr = pull --rebase
791 ps = push
792 psf = push --force
74ef10b0
AB
793 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
794 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
08146d0e
AB
795#+end_src
796
797**** color
798#+begin_src conf
799[color]
800 ui = auto
801[color "status"]
802 added = green bold
803 changed = red bold
804 untracked = red bold
805[color "branch"]
806 current = green bold
807 remote = magenta bold
808[color "diff"]
809 new = green bold
810 old = red bold
811#+end_src
812
813**** status
814#+begin_src conf
815[status]
816 # showUntrackedFiles = all
817 short=true
818 branch=true
819#+end_src
820
821**** github
822#+begin_src conf
823[github]
824 user = aminb
825#+end_src
826
5c7c14c7
AB
827**** send-email
828#+begin_src conf
829[sendemail]
b003853f 830 smtpuser = bandali
9e568495 831 smtpserver = fencepost.gnu.org
5c7c14c7
AB
832 smtpserverport = 587
833 smtpencryption = tls
834 annotate = yes
835#+end_src
836
08146d0e
AB
837*** gitignore
838:PROPERTIES:
839:header-args+: :tangle ~/.gitignore_global
840:END:
841
842#+begin_src conf
843*.orig
844*.py[co]
845*.sublime-workspace
846*~
847.DS_Store
848*.elc
849*-autoloads.el
850#+end_src
58cbbce2 851
a106372e
AB
852** GnuPG
853:PROPERTIES:
854:header-args+: :tangle ~/.gnupg/gpg-agent.conf
855:END:
856
857#+begin_src conf
858default-cache-ttl 43200
859max-cache-ttl 43200
860
861default-cache-ttl-ssh 10800
862max-cache-ttl-ssh 10800
863
864# pinentry-program /usr/bin/pinentry-qt
865#+end_src
866
867** GTK
868
869*** gtk-2.0
870:PROPERTIES:
871:header-args+: :tangle ~/.gtkrc-2.0
872:END:
873
874#+begin_src conf
875gtk-theme-name="Greybird"
876gtk-icon-theme-name="Paper"
877gtk-font-name="Ubuntu 10"
878gtk-menu-images=0
879# gtk-key-theme-name = "Emacs"
880#+end_src
881
882*** gtk-3.0
883:PROPERTIES:
884:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
885:END:
886
887#+begin_src conf :tangle no
888[Settings]
889gtk-icon-theme-name = Paper
890# gtk-theme-name = Adwaita
891
892gtk-theme-name = Greybird
893# gtk-theme-name = Arc-Darker
894# gtk-theme-name = Numix-ArchBlue
895
896gtk-font-name = Ubuntu 10
897# gtk-key-theme-name = Emacs
898#+end_src
899
a5547504
AB
900** [[https://github.com/Leinnan/i3gs][i3gs]]
901:PROPERTIES:
902:header-args+: :tangle ~/.config/i3gs/config
903:END:
904
6a056822 905#+begin_src conf :comments none :tangle no
a5547504
AB
906borders_width=0 0 2 0
907separator_width=10
908
be33ab1f
AB
909#[mpd]
910#preset=MPD
911#title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
912#borders_color=#7FDBFF
a5547504
AB
913
914[ram]
915preset=RAM
916title=<span weight='heavy' fgcolor='#3D9970'> </span>
917borders_color=#3D9970
918
be33ab1f
AB
919#[cpu]
920#preset=CPU
921#title=<span weight='heavy' fgcolor='#2ECC40'> </span>
922#borders_color=#2ECC40
a5547504 923
be33ab1f
AB
924#[hdd]
925#preset=HDD
926#title=<span weight='heavy' fgcolor='#01FF70'> </span>
927#borders_color=#01FF70
a5547504 928
4fc8d5d2
AB
929[volume]
930command=volume-info
931title=<span weight='heavy' fgcolor='#7FDBFF'></span>
932borders_color=#7FDBFF
933
a5547504
AB
934[battery]
935preset=BAT
683f2865 936command=battery-percentage-time
a5547504
AB
937title=<span weight='heavy' fgcolor='#39CCCC'> </span>
938borders_color=#39CCCC
939
940[wifi]
941preset=WIFI
942title=<span weight='heavy' fgcolor='#01FF70'> </span>
943borders_color=#01FF70
944
945[date]
946preset=DATE
ce79d14b 947command=date '+%-I:%M, %a %b %d '
a5547504
AB
948title=<span weight='heavy' fgcolor='#FFDC00'> </span>
949borders_color=#FFDC00
950separator_width=0
951#+end_src
6a056822
AB
952
953** i3status
954:PROPERTIES:
955:header-args+: :tangle ~/.config/i3status/config
956:END:
957
958#+begin_src conf :comments none
959# i3status configuration file.
960# see "man i3status" for documentation.
961
962# It is important that this file is edited as UTF-8.
963# The following line should contain a sharp s:
964# ß
965# If the above line is not correctly displayed, fix your editor first!
966
967general {
968 colors = true
969 interval = 5
9455bb8f 970 output_format = "i3bar"
6a056822
AB
971}
972
e939ef1a 973# order += "ipv6"
6a056822 974order += "disk /"
e939ef1a 975order += "disk /data"
6a056822 976order += "wireless _first_"
03cbbb1a 977order += "ethernet _first_"
e939ef1a 978order += "battery 0"
25bd9e84 979order += "volume master"
6a056822
AB
980order += "load"
981order += "tztime local"
982
983wireless _first_ {
e939ef1a 984 format_up = "W:%quality %essid %ip"
6a056822
AB
985 format_down = "W: down"
986}
987
03cbbb1a
AB
988ethernet _first_ {
989 # if you use %speed, i3status requires root privileges
990 format_up = "E: %ip (%speed)"
991 format_down = "E: down"
992}
e939ef1a
AB
993
994battery 0 {
995 format = "%status %percentage %remaining (%consumption)"
996 path = "/sys/class/power_supply/BAT%d/uevent"
25bd9e84
AB
997 low_threshold = "10"
998 threshold_type = "percentage"
999 last_full_capacity = true
e939ef1a
AB
1000 integer_battery_capacity = true
1001 hide_seconds = true
6a056822
AB
1002}
1003
1004tztime local {
e939ef1a 1005 format = "%-I:%M%P %a %b %d"
6a056822
AB
1006}
1007
25bd9e84
AB
1008volume master {
1009 format = "♪ %volume"
1010 format_muted = "🔇 %volume"
1011 device = "pulse"
1012}
1013
6a056822
AB
1014load {
1015 format = "%1min"
1016}
1017
1018disk "/" {
e939ef1a
AB
1019 format = "/ %avail"
1020}
1021
1022disk "/data" {
1023 format = "/data %avail"
6a056822
AB
1024}
1025#+end_src
1026
be76c6db
AB
1027** isync
1028
1029*** mbsyncrc
1030:PROPERTIES:
1031:header-args+: :tangle ~/.mbsyncrc
1032:END:
1033
1034#+begin_src conf
1035# Global defaults
1036CopyArrivalDate yes
6b6a22a2 1037Create Both
75a5f9ec 1038Expunge Both
be76c6db
AB
1039
1040######
1041IMAPAccount amin
037935ed 1042Host mail.aminb.org
be76c6db
AB
1043User amin@aminb.org
1044PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
1045SSLType IMAPS
1046
1047IMAPStore amin-remote
1048Account amin
1049
6b6a22a2
AB
1050IMAPAccount amin-dovecot
1051Host 127.0.0.1
1052Port 143
1053User amin@aminb.org
1054PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
1055SSLType None
1056
1057IMAPStore amin-local
1058Account amin-dovecot
be76c6db
AB
1059
1060Channel amin
1061Master :amin-remote:
1062Slave :amin-local:
6b6a22a2 1063Patterns *
be76c6db
AB
1064
1065######
1066IMAPAccount uwaterloo
1067Host connect.uwaterloo.ca
59027673 1068User abandali
be76c6db
AB
1069PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1070SSLType IMAPS
1071
1072IMAPStore uwaterloo-remote
1073Account uwaterloo
1074
6b6a22a2
AB
1075IMAPAccount uwaterloo-dovecot
1076Host 127.0.0.1
1077Port 143
1078User abandali@uwaterloo.ca
1079PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
1080SSLType None
1081
1082IMAPStore uwaterloo-local
1083Account uwaterloo-dovecot
be76c6db
AB
1084
1085Channel uwaterloo
1086Master :uwaterloo-remote:
1087Slave :uwaterloo-local:
6b6a22a2 1088Patterns *
be76c6db
AB
1089#+end_src
1090
1091*** mbsync.service
1092:PROPERTIES:
1093:header-args+: :tangle ~/.config/systemd/user/mbsync.service
1094:END:
1095
1096#+begin_src conf :tangle no
1097[Unit]
1098Description=mbsync service
1099
1100[Service]
1101Type=oneshot
1102ExecStart=/usr/bin/mbsync -Va
1103StandardOutput=syslog
1104StandardError=syslog
1105#+end_src
1106
1107*** mbsync.timer
1108:PROPERTIES:
1109:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1110:END:
1111
1112#+begin_src conf :tangle no
1113[Unit]
1114Description=mbsync timer
1115
1116[Timer]
1117OnCalendar=*:0/15
1118Persistent=true
1119Unit=mbsync.service
1120
1121[Install]
1122WantedBy=timers.target
1123#+end_src
1124
a106372e
AB
1125** Latexmk
1126:PROPERTIES:
1127:header-args+: :tangle ~/.latexmkrc
1128:END:
1129
1130#+begin_src conf
1131$pdf_previewer = "start zathura %O %S";
1132$clean_ext = "aux out";
1133
1134# $pdf_update_method = 4;
1135# $pdf_update_command = "zathura %O %S";
1136
1137# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1138# by Ctrl+click in the PDF.
1139# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1140# editor.
1141# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1142#+end_src
1143
1144** libinput
1145
1146Improve XPS 15 9560's touchpad experience.
1147
1148# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1149#+begin_src conf :tangle no
1150Section "InputClass"
1151 Identifier "libinput touchpad catchall"
1152 Driver "libinput"
1153 MatchIsTouchpad "on"
1154 Option "ClickMethod" "clickfinger"
1155 Option "NaturalScrolling" "true"
1156 Option "Tapping" "on"
1157 Option "TappingButtonMap" "lrm"
1158EndSection
1159#+end_src
1160
59027673
AB
1161** mpd
1162:PROPERTIES:
1163:header-args+: :tangle ~/.config/mpd/mpd.conf
1164:END:
1165
1166#+begin_src conf
1167# An example configuration file for MPD.
1168# Read the user manual for documentation: http://www.musicpd.org/doc/user/
1169
1170
1171# Files and directories #######################################################
1172#
1173# This setting controls the top directory which MPD will search to discover the
1174# available audio files and add them to the daemon's online database. This
1175# setting defaults to the XDG directory, otherwise the music directory will be
1176# be disabled and audio files will only be accepted over ipc socket (using
1177# file:// protocol) or streaming files over an accepted protocol.
1178#
1179music_directory "~/usr/music"
1180#
1181# This setting sets the MPD internal playlist directory. The purpose of this
1182# directory is storage for playlists created by MPD. The server will use
1183# playlist files not created by the server but only if they are in the MPD
1184# format. This setting defaults to playlist saving being disabled.
1185#
1186playlist_directory "~/.mpd/playlists"
1187#
1188# This setting sets the location of the MPD database. This file is used to
1189# load the database at server start up and store the database while the
1190# server is not up. This setting defaults to disabled which will allow
1191# MPD to accept files over ipc socket (using file:// protocol) or streaming
1192# files over an accepted protocol.
1193#
1194db_file "~/.mpd/database"
1195#
1196# These settings are the locations for the daemon log files for the daemon.
1197# These logs are great for troubleshooting, depending on your log_level
1198# settings.
1199#
1200# The special value "syslog" makes MPD use the local syslog daemon. This
1201# setting defaults to logging to syslog, otherwise logging is disabled.
1202#
1203log_file "~/.mpd/log"
1204#
1205# This setting sets the location of the file which stores the process ID
1206# for use of mpd --kill and some init scripts. This setting is disabled by
1207# default and the pid file will not be stored.
1208#
1209pid_file "~/.mpd/pid"
1210#
1211# This setting sets the location of the file which contains information about
1212# most variables to get MPD back into the same general shape it was in before
1213# it was brought down. This setting is disabled by default and the server
1214# state will be reset on server start up.
1215#
1216state_file "~/.mpd/state"
1217#
1218# The location of the sticker database. This is a database which
1219# manages dynamic information attached to songs.
1220#
1221sticker_file "~/.mpd/sticker.sql"
1222#
1223###############################################################################
1224
1225
1226# General music daemon options ################################################
1227#
1228# This setting specifies the user that MPD will run as. MPD should never run as
1229# root and you may use this setting to make MPD change its user ID after
1230# initialization. This setting is disabled by default and MPD is run as the
1231# current user.
1232#
1233#user "nobody"
1234#
1235# This setting specifies the group that MPD will run as. If not specified
1236# primary group of user specified with "user" setting will be used (if set).
1237# This is useful if MPD needs to be a member of group such as "audio" to
1238# have permission to use sound card.
1239#
1240#group "nogroup"
1241#
1242# This setting sets the address for the daemon to listen on. Careful attention
1243# should be paid if this is assigned to anything other then the default, any.
1244# This setting can deny access to control of the daemon. Not effective if
1245# systemd socket activiation is in use.
1246#
1247# For network
1248#bind_to_address "any"
1249#
1250# And for Unix Socket
1251#bind_to_address "~/.mpd/socket"
1252#
1253# This setting is the TCP port that is desired for the daemon to get assigned
1254# to.
1255#
1256#port "6600"
1257#
1258# This setting controls the type of information which is logged. Available
1259# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1260# argument is recommended for troubleshooting, though can quickly stretch
1261# available resources on limited hardware storage.
1262#
1263#log_level "default"
1264#
1265# If you have a problem with your MP3s ending abruptly it is recommended that
1266# you set this argument to "no" to attempt to fix the problem. If this solves
1267# the problem, it is highly recommended to fix the MP3 files with vbrfix
1268# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1269# point gapless MP3 playback can be enabled.
1270#
1271#gapless_mp3_playback "yes"
1272#
1273# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1274# of starting playback after startup.
1275#
1276#restore_paused "no"
1277#
1278# This setting enables MPD to create playlists in a format usable by other
1279# music players.
1280#
1281#save_absolute_paths_in_playlists "no"
1282#
1283# This setting defines a list of tag types that will be extracted during the
1284# audio file discovery process. The complete list of possible values can be
1285# found in the user manual.
1286#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1287#
1288# This setting enables automatic update of MPD's database when files in
1289# music_directory are changed.
1290#
1291#auto_update "yes"
1292#
1293# Limit the depth of the directories being watched, 0 means only watch
1294# the music directory itself. There is no limit by default.
1295#
1296#auto_update_depth "3"
1297#
1298###############################################################################
1299
1300
1301# Symbolic link behavior ######################################################
1302#
1303# If this setting is set to "yes", MPD will discover audio files by following
1304# symbolic links outside of the configured music_directory.
1305#
1306#follow_outside_symlinks "yes"
1307#
1308# If this setting is set to "yes", MPD will discover audio files by following
1309# symbolic links inside of the configured music_directory.
1310#
1311#follow_inside_symlinks "yes"
1312#
1313###############################################################################
1314
1315
1316# Zeroconf / Avahi Service Discovery ##########################################
1317#
1318# If this setting is set to "yes", service information will be published with
1319# Zeroconf / Avahi.
1320#
1321#zeroconf_enabled "yes"
1322#
1323# The argument to this setting will be the Zeroconf / Avahi unique name for
1324# this MPD server on the network.
1325#
1326#zeroconf_name "Music Player"
1327#
1328###############################################################################
1329
1330
1331# Permissions #################################################################
1332#
1333# If this setting is set, MPD will require password authorization. The password
1334# setting can be specified multiple times for different password profiles.
1335#
1336#password "password@read,add,control,admin"
1337#
1338# This setting specifies the permissions a user has who has not yet logged in.
1339#
1340#default_permissions "read,add,control,admin"
1341#
1342###############################################################################
1343
1344
1345# Database #######################################################################
1346#
1347
1348#database {
1349# plugin "proxy"
1350# host "other.mpd.host"
1351# port "6600"
1352#}
1353
1354# Input #######################################################################
1355#
1356
1357input {
1358 plugin "curl"
1359# proxy "proxy.isp.com:8080"
1360# proxy_user "user"
1361# proxy_password "password"
1362}
1363
1364#
1365###############################################################################
1366
1367# Audio Output ################################################################
1368#
1369
1370audio_output {
1371 type "pulse"
1372 name "pulse audio"
1373}
1374
1375audio_output {
1376 type "fifo"
1377 name "my_fifo"
1378 path "/tmp/mpd.fifo"
1379 format "44100:16:2"
1380}
1381
1382# MPD supports various audio output types, as well as playing through multiple
1383# audio outputs at the same time, through multiple audio_output settings
1384# blocks. Setting this block is optional, though the server will only attempt
1385# autodetection for one sound card.
1386#
1387# An example of an ALSA output:
1388#
1389#audio_output {
1390# type "alsa"
1391# name "My ALSA Device"
1392## device "hw:0,0" # optional
1393## mixer_type "hardware" # optional
1394## mixer_device "default" # optional
1395## mixer_control "PCM" # optional
1396## mixer_index "0" # optional
1397#}
1398#
1399# An example of an OSS output:
1400#
1401#audio_output {
1402# type "oss"
1403# name "My OSS Device"
1404## device "/dev/dsp" # optional
1405## mixer_type "hardware" # optional
1406## mixer_device "/dev/mixer" # optional
1407## mixer_control "PCM" # optional
1408#}
1409#
1410# An example of a shout output (for streaming to Icecast):
1411#
1412#audio_output {
1413# type "shout"
1414# encoder "vorbis" # optional
1415# name "My Shout Stream"
1416# host "localhost"
1417# port "8000"
1418# mount "/mpd.ogg"
1419# password "hackme"
1420# quality "5.0"
1421# bitrate "128"
1422# format "44100:16:1"
1423## protocol "icecast2" # optional
1424## user "source" # optional
1425## description "My Stream Description" # optional
1426## url "http://example.com" # optional
1427## genre "jazz" # optional
1428## public "no" # optional
1429## timeout "2" # optional
1430## mixer_type "software" # optional
1431#}
1432#
1433# An example of a recorder output:
1434#
1435#audio_output {
1436# type "recorder"
1437# name "My recorder"
1438# encoder "vorbis" # optional, vorbis or lame
1439# path "/var/lib/mpd/recorder/mpd.ogg"
1440## quality "5.0" # do not define if bitrate is defined
1441# bitrate "128" # do not define if quality is defined
1442# format "44100:16:1"
1443#}
1444#
1445# An example of a httpd output (built-in HTTP streaming server):
1446#
1447#audio_output {
1448# type "httpd"
1449# name "My HTTP Stream"
1450# encoder "vorbis" # optional, vorbis or lame
1451# port "8000"
1452# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1453## quality "5.0" # do not define if bitrate is defined
1454# bitrate "128" # do not define if quality is defined
1455# format "44100:16:1"
1456# max_clients "0" # optional 0=no limit
1457#}
1458#
1459# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1460#
1461#audio_output {
1462# type "pulse"
1463# name "My Pulse Output"
1464## server "remote_server" # optional
1465## sink "remote_server_sink" # optional
1466#}
1467#
1468# An example of a winmm output (Windows multimedia API).
1469#
1470#audio_output {
1471# type "winmm"
1472# name "My WinMM output"
1473## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1474# or
1475## device "0" # optional
1476## mixer_type "hardware" # optional
1477#}
1478#
1479# An example of an openal output.
1480#
1481#audio_output {
1482# type "openal"
1483# name "My OpenAL output"
1484## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1485#}
1486#
1487# An example of an sndio output.
1488#
1489#audio_output {
1490# type "sndio"
1491# name "sndio output"
1492# mixer_type "software"
1493#}
1494#
1495# An example of an OS X output:
1496#
1497#audio_output {
1498# type "osx"
1499# name "My OS X Device"
1500## device "Built-in Output" # optional
1501## channel_map "-1,-1,0,1" # optional
1502#}
1503#
1504## Example "pipe" output:
1505#
1506#audio_output {
1507# type "pipe"
1508# name "my pipe"
1509# command "aplay -f cd 2>/dev/null"
1510## Or if you're want to use AudioCompress
1511# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1512## Or to send raw PCM stream through PCM:
1513# command "nc example.org 8765"
1514# format "44100:16:2"
1515#}
1516#
1517## An example of a null output (for no audio output):
1518#
1519#audio_output {
1520# type "null"
1521# name "My Null Output"
1522# mixer_type "none" # optional
1523#}
1524#
1525###############################################################################
1526
1527
1528# Normalization automatic volume adjustments ##################################
1529#
1530# This setting specifies the type of ReplayGain to use. This setting can have
1531# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1532# chooses between "track" and "album" depending on the current state of
1533# random playback. If random playback is enabled then "track" mode is used.
1534# See <http://www.replaygain.org> for more details about ReplayGain.
1535# This setting is off by default.
1536#
1537#replaygain "album"
1538#
1539# This setting sets the pre-amp used for files that have ReplayGain tags. By
1540# default this setting is disabled.
1541#
1542#replaygain_preamp "0"
1543#
1544# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1545# By default this setting is disabled.
1546#
1547#replaygain_missing_preamp "0"
1548#
1549# This setting enables or disables ReplayGain limiting.
1550# MPD calculates actual amplification based on the ReplayGain tags
1551# and replaygain_preamp / replaygain_missing_preamp setting.
1552# If replaygain_limit is enabled MPD will never amplify audio signal
1553# above its original level. If replaygain_limit is disabled such amplification
1554# might occur. By default this setting is enabled.
1555#
1556#replaygain_limit "yes"
1557#
1558# This setting enables on-the-fly normalization volume adjustment. This will
1559# result in the volume of all playing audio to be adjusted so the output has
1560# equal "loudness". This setting is disabled by default.
1561#
1562#volume_normalization "no"
1563#
1564###############################################################################
1565
1566# Character Encoding ##########################################################
1567#
1568# If file or directory names do not display correctly for your locale then you
1569# may need to modify this setting.
1570#
1571#filesystem_charset "UTF-8"
1572#
1573###############################################################################
1574#+end_src
1575
1576** msmtp
1577:PROPERTIES:
1578:header-args+: :tangle ~/.msmtprc
1579:END:
1580
1581#+begin_src conf
1582# Set default values for all following accounts.
1583defaults
1584port 587
1585tls on
1586auth on
1587#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1588logfile ~/.msmtp.log
1589
1590# aminb
1591account aminb
037935ed 1592host mail.aminb.org
55879085 1593# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
037935ed 1594tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
59027673
AB
1595tls_starttls on
1596from amin@aminb.org
1597user amin@aminb.org
1598passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1599
1600# gnu
1601account gnu
1602host fencepost.gnu.org
1e55aaa3 1603# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
05675ca4 1604tls_fingerprint 34:60:91:B5:71:5B:76:87:50:F3:83:13:26:0F:EE:75:42:83:93:9A:E2:AF:1E:87:72:02:C9:61:CE:28:1B:8E
59027673 1605tls_starttls on
b003853f
AB
1606from bandali@gnu.org
1607user bandali
59027673
AB
1608passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1609
b003853f
AB
1610# gnu (old)
1611account gnu-aminb : gnu
1612from aminb@gnu.org
1613account gnu-amin : gnu
1614from amin@gnu.org
1615account gnu-mab : gnu
1616from mab@gnu.org
9e568495 1617
59027673
AB
1618# uwaterloo
1619account uwaterloo
1620host connect.uwaterloo.ca
1621tls_starttls on
1622from abandali@uwaterloo.ca
1623user abandali
1624passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1625tls_trust_file /etc/ssl/certs/ca-certificates.crt
1626
59027673
AB
1627# Set a default account
1628account default : aminb
1629#+end_src
1630
1631** ncmpcpp
1632
1633*** config
1634:PROPERTIES:
1635:header-args+: :tangle ~/.ncmpcpp/config
1636:END:
1637
1638#+begin_src conf :tangle no
1639##############################################################
1640## This is the example configuration file. Copy it to ##
1641## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1642## and set up your preferences. ##
1643##############################################################
1644#
1645##### directories ######
1646##
1647## Directory for storing ncmpcpp related files.
1648## Changing it is useful if you want to store
1649## everything somewhere else and provide command
1650## line setting for alternative location to config
1651## file which defines that while launching ncmpcpp.
1652##
1653#
1654ncmpcpp_directory = ~/.ncmpcpp
1655#
1656##
1657## Directory for storing downloaded lyrics. It
1658## defaults to ~/.lyrics since other MPD clients
1659## (eg. ncmpc) also use that location.
1660##
1661#
1662#lyrics_directory = ~/.lyrics
1663#
1664##### connection settings #####
1665#
1666#mpd_host = localhost
1667#
1668#mpd_port = 6600
1669#
1670#mpd_connection_timeout = 5
1671#
1672## Needed for tag editor and file operations to work.
1673##
1674mpd_music_dir = ~/usr/music
1675#
1676#mpd_crossfade_time = 5
1677#
1678##### music visualizer #####
1679##
1680## Note: In order to make music visualizer work you'll
1681## need to use mpd fifo output, whose format parameter
1682## has to be set to 44100:16:1 for mono visualization
1683## or 44100:16:2 for stereo visualization. Example
1684## configuration (it has to be put into mpd.conf):
1685##
1686## audio_output {
1687## type "fifo"
1688## name "Visualizer feed"
1689## path "/tmp/mpd.fifo"
1690## format "44100:16:2"
1691## }
1692##
1693#
1694visualizer_fifo_path = /tmp/mpd.fifo
1695#
1696##
1697## Note: Below parameter is needed for ncmpcpp
1698## to determine which output provides data for
1699## visualizer and thus allow syncing between
1700## visualization and sound as currently there
1701## are some problems with it.
1702##
1703#
1704visualizer_output_name = my fifo
1705#
1706##
1707## If you set format to 44100:16:2, make it 'yes'.
1708##
1709visualizer_in_stereo = yes
1710#
1711##
1712## Multiply received samples by given value. Very
1713## useful for proper visualization of quiet music.
1714##
1715#visualizer_sample_multiplier = 1
1716#
1717##
1718## Note: Below parameter defines how often ncmpcpp
1719## has to "synchronize" visualizer and audio outputs.
1720## 30 seconds is optimal value, but if you experience
1721## synchronization problems, set it to lower value.
1722## Keep in mind that sane values start with >=10.
1723##
1724#
1725visualizer_sync_interval = 30
1726#
1727##
1728## Note: To enable spectrum frequency visualization
1729## you need to compile ncmpcpp with fftw3 support.
1730##
1731#
1732## Available values: spectrum, wave, wave_filled, ellipse.
1733##
1734visualizer_type = spectrum
1735#
1736#visualizer_look = ●▮
1737visualizer_look = "●•"
1738#
1739#visualizer_color = blue, cyan, green, yellow, magenta, red
1740#
1741## Alternative subset of 256 colors for terminals that support it.
1742##
1743#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1744#
1745##### system encoding #####
1746##
1747## ncmpcpp should detect your charset encoding
1748## but if it failed to do so, you can specify
1749## charset encoding you are using here.
1750##
1751## Note: You can see whether your ncmpcpp build
1752## supports charset detection by checking output
1753## of `ncmpcpp --version`.
1754##
1755## Note: Since MPD uses UTF-8 by default, setting
1756## this option makes sense only if your encoding
1757## is different.
1758##
1759#
1760#system_encoding = ""
1761#
1762##### delays #####
1763#
1764## Time of inactivity (in seconds) after playlist
1765## highlighting will be disabled (0 = always on).
1766##
1767#playlist_disable_highlight_delay = 5
1768#
1769## Defines how long messages are supposed to be visible.
1770##
1771#message_delay_time = 5
1772#
1773##### song format #####
1774##
1775## For a song format you can use:
1776##
1777## %l - length
1778## %f - filename
1779## %D - directory
1780## %a - artist
1781## %A - album artist
1782## %t - title
1783## %b - album
1784## %y - date
1785## %n - track number (01/12 -> 01)
1786## %N - full track info (01/12 -> 01/12)
1787## %g - genre
1788## %c - composer
1789## %p - performer
1790## %d - disc
1791## %C - comment
1792## %P - priority
1793## $R - begin right alignment
1794##
1795## If you want to make sure that a part of the format is displayed
1796## only when certain tags are present, you can archieve it by
1797## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1798## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1799## It is also possible to define a list of alternatives by providing
1800## several groups and separating them with '|', e.g. '{%t}|{%f}'
1801## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1802## present.
1803##
1804## Note: If you want to set limit on maximal length of a tag, just
1805## put the appropriate number between % and character that defines
1806## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1807##
1808## In addition, formats support markers used for text attributes.
1809## They are followed by character '$'. After that you can put:
1810##
1811## - 0 - default window color (discards all other colors)
1812## - 1 - black
1813## - 2 - red
1814## - 3 - green
1815## - 4 - yellow
1816## - 5 - blue
1817## - 6 - magenta
1818## - 7 - cyan
1819## - 8 - white
1820## - 9 - end of current color
1821## - b - bold text
1822## - u - underline text
1823## - r - reverse colors
1824## - a - use alternative character set
1825##
1826## If you don't want to use a non-color attribute anymore, just put it
1827## again, but this time insert character '/' between '$' and attribute
1828## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1829## or filename with reversed colors.
1830##
1831## If you want to use 256 colors and/or background colors in formats
1832## (the naming scheme is described below in section about color
1833## definitions), it can be done with the syntax $(COLOR), e.g. to set
1834## the artist tag to one of the non-standard colors and make it have
1835## yellow background, you need to write $(197_yellow)%a$(end). Note
1836## that for standard colors this is interchangable with attributes
1837## listed above.
1838##
1839## Note: colors can be nested.
1840##
1841#
1842#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1843#
1844#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1845#
1846#song_library_format = {%n - }{%t}|{%f}
1847#
1848#
1849#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1850#
1851#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1852#
1853#now_playing_prefix = $b
1854#
1855#now_playing_suffix = $/b
1856#
1857#browser_playlist_prefix = "$2playlist$9 "
1858#
1859#selected_item_prefix = $6
1860#
1861#selected_item_suffix = $9
1862#
1863#modified_item_prefix = $3> $9
1864#
1865##
1866## Note: attributes are not supported for the following variables.
1867##
1868#song_window_title_format = {%a - }{%t}|{%f}
1869##
1870## Note: Below variables are used for sorting songs in browser.
1871## The sort mode determines how songs are sorted, and can be used
1872## in combination with a sort format to specify a custom sorting format.
1873## Available values for browser_sort_mode are "name", "mtime", "format"
1874## and "noop".
1875##
1876#
1877#browser_sort_mode = name
1878#
1879#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1880#
1881##### columns settings #####
1882##
1883## syntax of song columns list format is "column column etc."
1884##
1885## - syntax for each column is:
1886##
1887## (width of the column)[color of the column]{displayed tag}
1888##
1889## Note: Width is by default in %, if you want a column to
1890## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1891## will be the column that take 10% of screen (so the real width
1892## will depend on actual screen size), whereas (10f)[white]{a}
1893## will take 10 terminal cells, no matter how wide the screen is.
1894##
1895## - color is optional (if you want the default one,
1896## leave the field empty).
1897##
1898## Note: You can give a column additional attributes by putting appropriate
1899## character after displayed tag character. Available attributes are:
1900##
1901## - r - column will be right aligned
1902## - E - if tag is empty, empty tag marker won't be displayed
1903##
1904## You can also:
1905##
1906## - give a column custom name by putting it after attributes,
1907## separated with character ':', e.g. {lr:Length} gives you
1908## right aligned column of lengths named "Length".
1909##
1910## - define sequence of tags, that have to be displayed in case
1911## predecessor is empty in a way similar to the one in classic
1912## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1913## creates column named "Owner" that tries to display artist
1914## tag and then composer and performer if previous ones are
1915## not available.
1916##
1917#
1918#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1919#
1920##### various settings #####
1921#
1922##
1923## Note: Custom command that will be executed each
1924## time song changes. Useful for notifications etc.
1925##
1926#execute_on_song_change = ""
1927#
1928#playlist_show_mpd_host = no
1929#
1930#playlist_show_remaining_time = no
1931#
1932#playlist_shorten_total_times = no
1933#
1934#playlist_separate_albums = no
1935#
1936##
1937## Note: Possible display modes: classic, columns.
1938##
1939#playlist_display_mode = columns
1940#
1941#browser_display_mode = classic
1942#
1943#search_engine_display_mode = classic
1944#
1945#playlist_editor_display_mode = classic
1946#
1947#discard_colors_if_item_is_selected = yes
1948#
1949#incremental_seeking = yes
1950#
1951#seek_time = 1
1952#
1953#volume_change_step = 2
1954#
1955#autocenter_mode = no
1956#
1957#centered_cursor = no
1958#
1959##
1960## Note: You can specify third character which will
1961## be used to build 'empty' part of progressbar.
1962##
1963#progressbar_look = =>
1964progressbar_look = "─╼╶"
1965#progressbar_look = "─⊙╶"
1966#
1967#progressbar_boldness = yes
1968#
1969## Available values: database, playlist.
1970##
1971#default_place_to_search_in = database
1972#
1973## Available values: classic, alternative.
1974##
1975#user_interface = classic
1976#
1977#data_fetching_delay = yes
1978#
1979## Available values: artist, album_artist, date, genre, composer, performer.
1980##
1981#media_library_primary_tag = artist
1982#
1983## Available values: wrapped, normal.
1984##
1985#default_find_mode = wrapped
1986#
1987#default_tag_editor_pattern = %n - %t
1988#
1989#header_visibility = yes
1990#
1991#statusbar_visibility = yes
1992#
1993#titles_visibility = yes
1994#
1995#header_text_scrolling = yes
1996#
1997#cyclic_scrolling = no
1998#
1999#lines_scrolled = 2
2000#
2001#follow_now_playing_lyrics = no
2002#
2003#fetch_lyrics_for_current_song_in_background = no
2004#
2005#store_lyrics_in_song_dir = no
2006#
2007#generate_win32_compatible_filenames = yes
2008#
2009#allow_for_physical_item_deletion = no
2010#
2011##
2012## Note: If you set this variable, ncmpcpp will try to
2013## get info from last.fm in language you set and if it
2014## fails, it will fall back to english. Otherwise it will
2015## use english the first time.
2016##
2017## Note: Language has to be expressed as an ISO 639 alpha-2 code.
2018##
2019#lastfm_preferred_language = en
2020#
2021#show_hidden_files_in_local_browser = no
2022#
2023##
2024## How shall screen switcher work?
2025##
2026## - "previous" - switch between the current and previous screen.
2027## - "screen1,...,screenN" - switch between given sequence of screens.
2028##
2029## Screens available for use: help, playlist, browser, search_engine,
2030## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
2031##
2032#screen_switcher_mode = playlist, browser
2033#
2034##
2035## Note: You can define startup screen
2036## by choosing screen from the list above.
2037##
2038#startup_screen = playlist
2039#
2040##
2041## Note: You can define startup slave screen
2042## by choosing screen from the list above or
2043## an empty value for no slave screen.
2044##
2045#startup_slave_screen = ""
2046#
2047#startup_slave_screen_focus = no
2048#
2049##
2050## Default width of locked screen (in %).
2051## Acceptable values are from 20 to 80.
2052##
2053#
2054#locked_screen_width_part = 50
2055#
2056#ask_for_locked_screen_width_part = yes
2057#
2058#jump_to_now_playing_song_at_start = yes
2059#
2060#ask_before_clearing_playlists = yes
2061#
2062#clock_display_seconds = no
2063#
2064#display_volume_level = yes
2065#
2066#display_bitrate = no
2067#
2068#display_remaining_time = no
2069#
2070## Available values: none, basic, extended, perl.
2071##
2072#regular_expressions = perl
2073#
2074##
2075## Note: If below is enabled, ncmpcpp will ignore leading
2076## "The" word while sorting items in browser, tags in
2077## media library, etc.
2078##
2079#ignore_leading_the = no
2080#
2081#block_search_constraints_change_if_items_found = yes
2082#
2083#mouse_support = yes
2084#
2085#mouse_list_scroll_whole_page = yes
2086#
2087#empty_tag_marker = <empty>
2088#
2089#tags_separator = " | "
2090#
2091#tag_editor_extended_numeration = no
2092#
2093#media_library_sort_by_mtime = no
2094#
2095#enable_window_title = yes
2096#
2097##
2098## Note: You can choose default search mode for search
2099## engine. Available modes are:
2100##
2101## - 1 - use mpd built-in searching (no regexes, pattern matching)
2102## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2103## but if your mpd is on a remote machine, downloading big database
2104## to process it can take a while
2105## - 3 - match only exact values (this mode uses mpd function for searching
2106## in database and local one for searching in current playlist)
2107##
2108#
2109#search_engine_default_search_mode = 1
2110#
2111#external_editor = nano
2112#
2113## Note: set to yes if external editor is a console application.
2114##
2115#use_console_editor = yes
2116#
2117##### colors definitions #####
2118##
2119## It is possible to set a background color by setting a color
2120## value "<foreground>_<background>", e.g. red_black will set
2121## foregound color to red and background color to black.
2122##
2123## In addition, for terminals that support 256 colors it
2124## is possible to set one of them by using a number in range
2125## [1, 256] instead of color name, e.g. numerical value
2126## corresponding to red_black is 2_1. To find out if the
2127## terminal supports 256 colors, run ncmpcpp and check out
2128## the bottom of the help screen for list of available colors
2129## and their numerical values.
2130##
2131## Note: due to technical limitations of ncurses, if 256 colors
2132## are used, it is possible to either use only the colors with
2133## default background color, or all pairs from 1_1 up to 254_127,
2134## depending on the ncurses version used.
2135##
2136#
2137#colors_enabled = yes
2138#
2139#empty_tag_color = cyan
2140#
2141#header_window_color = default
2142#
2143#volume_color = default
2144#
2145#state_line_color = default
2146#
2147#state_flags_color = default
2148#
2149#main_window_color = yellow
2150#
2151#color1 = white
2152#
2153#color2 = green
2154#
2155#main_window_highlight_color = yellow
2156#
2157#progressbar_color = black
2158#
2159#progressbar_elapsed_color = green
2160#
2161#statusbar_color = default
2162#
2163#alternative_ui_separator_color = black
2164#
2165#active_column_color = red
2166#
2167#window_border_color = green
2168#
2169#active_window_border = red
2170#
2171#+end_src
2172
2173*** bindings
2174:PROPERTIES:
2175:header-args+: :tangle ~/.ncmpcpp/bindings
2176:END:
2177
2178#+begin_src conf :tangle no
2179def_key "j"
2180 scroll_down
2181def_key "k"
2182 scroll_up
2183
2184def_key "ctrl-u"
2185 page_up
2186def_key "ctrl-d"
2187 page_down
2188
2189def_key "h"
2190 previous_column
2191def_key "l"
2192 next_column
2193
2194def_key "."
2195 show_lyrics
2196
2197def_key "n"
2198 next_found_item
2199def_key "N"
2200 previous_found_item
2201
2202def_key "J"
2203 move_sort_order_down
2204def_key "K"
2205 move_sort_order_up
2206#+end_src
2207
25869427
AB
2208** notmuch
2209
2210*** notmuch-config
2211:PROPERTIES:
2212:header-args+: :tangle ~/.notmuch-config
2213:END:
2214
2215#+begin_src conf
2216# .notmuch-config - Configuration file for the notmuch mail system
2217#
2218# For more information about notmuch, see https://notmuchmail.org
2219
2220# Database configuration
2221#
2222# The only value supported here is 'path' which should be the top-level
2223# directory where your mail currently exists and to where mail will be
2224# delivered in the future. Files should be individual email messages.
2225# Notmuch will store its database within a sub-directory of the path
2226# configured here named ".notmuch".
2227#
2228[database]
6b6a22a2 2229path=/home/amin/oldmail
25869427
AB
2230
2231# User configuration
2232#
2233# Here is where you can let notmuch know how you would like to be
2234# addressed. Valid settings are
2235#
2236# name Your full name.
2237# primary_email Your primary email address.
2238# other_email A list (separated by ';') of other email addresses
2239# at which you receive email.
2240#
2241# Notmuch will use the various email addresses configured here when
2242# formatting replies. It will avoid including your own addresses in the
2243# recipient list of replies, and will set the From address based on the
2244# address to which the original email was addressed.
2245#
2246[user]
2247name=Amin Bandali
2248primary_email=amin@aminb.org
05675ca4 2249other_email=bandali@gnu.org;abandali@uwaterloo.ca;
25869427
AB
2250
2251# Configuration for "notmuch new"
2252#
2253# The following options are supported here:
2254#
2255# tags A list (separated by ';') of the tags that will be
2256# added to all messages incorporated by "notmuch new".
2257#
2258# ignore A list (separated by ';') of file and directory names
2259# that will not be searched for messages by "notmuch new".
2260#
2261# NOTE: *Every* file/directory that goes by one of those
2262# names will be ignored, independent of its depth/location
2263# in the mail store.
2264#
2265[new]
2266tags=new;
2267#tags=unread;inbox;
18faca55 2268ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
25869427
AB
2269
2270# Search configuration
2271#
2272# The following option is supported here:
2273#
2274# exclude_tags
2275# A ;-separated list of tags that will be excluded from
2276# search results by default. Using an excluded tag in a
2277# query will override that exclusion.
2278#
2279[search]
2280exclude_tags=deleted;spam;
2281
2282# Maildir compatibility configuration
2283#
2284# The following option is supported here:
2285#
2286# synchronize_flags Valid values are true and false.
2287#
2288# If true, then the following maildir flags (in message filenames)
2289# will be synchronized with the corresponding notmuch tags:
2290#
2291# Flag Tag
2292# ---- -------
2293# D draft
2294# F flagged
2295# P passed
2296# R replied
2297# S unread (added when 'S' flag is not present)
2298#
2299# The "notmuch new" command will notice flag changes in filenames
2300# and update tags, while the "notmuch tag" and "notmuch restore"
2301# commands will notice tag changes and update flags in filenames
2302#
2303[maildir]
2304synchronize_flags=true
2305
2306# Cryptography related configuration
2307#
2308# The following option is supported here:
2309#
2310# gpg_path
2311# binary name or full path to invoke gpg.
2312#
2313[crypto]
2314gpg_path=gpg
2315#+end_src
2316
18faca55
AB
2317*** pre-new hook
2318:PROPERTIES:
2319:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2320:END:
2321
2322#+begin_src sh
2323touch /tmp/gnusieve.log
2324sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2325 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2326#+end_src
2327
25869427
AB
2328*** post-new hook
2329:PROPERTIES:
2330:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2331:END:
2332
2333#+begin_src sh
18faca55 2334# apply sent tag to messages sent by me
05675ca4 2335notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
18faca55
AB
2336
2337# initial tagging
b6c1036f 2338notmuch tag -latest -- tag:latest
53960d74 2339notmuch tag +inbox +unread +latest -new -- tag:new
25869427 2340
378b4afa 2341
25869427 2342# apply tags to lists
378b4afa
AB
2343
2344# <aminb>
18faca55 2345notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
378b4afa 2346notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
ddb0b1d4 2347
2a6e947b 2348notmuch tag -inbox +pay -- folder:amin/pay
74ef10b0 2349notmuch tag -inbox +banking -- folder:amin/banking
2a6e947b 2350notmuch tag -inbox +work -- folder:amin/work
378b4afa
AB
2351# </aminb>
2352
2353# <uw>
2a6e947b
AB
2354notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2355notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2356notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2357notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2358notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
378b4afa 2359
d5dbdde5 2360notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
378b4afa
AB
2361notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2362notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2363notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2364notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2365notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2366# </uw>
2367
2368# <gnu>
b6c1036f
AB
2369notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2370notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2371notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2372notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2373notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2374notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2375notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2376notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2377notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2378notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2379notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2380
2381notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2382notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2383notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2384notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2385
2386notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2387notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2388notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2389notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2390notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
ddb0b1d4 2391# </gnu>
b6232163
AB
2392
2393notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2394notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
25869427
AB
2395#+end_src
2396
2397*** notmuch.service
2398:PROPERTIES:
2399:header-args+: :tangle ~/.config/systemd/user/notmuch.service
2400:END:
2401
2402#+begin_src conf :tangle no
2403[Unit]
2404Description=notmuch service
2405
2406[Service]
2407Type=oneshot
2408ExecStart=/usr/bin/notmuch new
2409StandardOutput=syslog
2410StandardError=syslog
2411#+end_src
2412
2413*** notmuch.timer
2414:PROPERTIES:
2415:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2416:END:
2417
2418#+begin_src conf :tangle no
2419[Unit]
2420Description=notmuch timer
2421
2422[Timer]
2423OnCalendar=*:0/5
2424Persistent=true
2425Unit=notmuch.service
2426
2427[Install]
2428WantedBy=timers.target
2429#+end_src
2430
2431** offlineimap
2432
2433*** offlineimaprc
2434:PROPERTIES:
2435:header-args+: :tangle ~/.offlineimaprc
2436:END:
2437
2438#+begin_src conf :tangle no
2439[general]
2440pythonfile = ~/.offlineimap.py
2441accounts = Gmail, aminb
2442maxsyncaccounts = 3
2443
2444[Account Gmail]
2445localrepository = GmailL
2446remoterepository = GmailR
2447
2448[Account aminb]
2449localrepository = aminbL
2450remoterepository = aminbR
2451
2452[Repository GmailL]
2453type = Maildir
2454localfolders = ~/Maildir/Gmail
2455
2456[Repository GmailR]
2457type = IMAP
2458remotehost = imap.gmail.com
2459remoteusereval = mailuser("gmail")
2460remotepasseval = mailpasswd("gmail")
2461sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2462ssl = yes
2463folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2464maxconnections = 1
2465realdelete = no
2466
2467[Repository aminbL]
2468type = Maildir
2469localfolders = ~/Maildir/aminb
2470
2471[Repository aminbR]
2472type = IMAP
2473remotehost = mail.aminb.org
2474remoteusereval = mailuser("aminb")
2475remotepasseval = mailpasswd("aminb")
2476sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2477ssl = yes
2478folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2479maxconnections = 1
2480realdelete = no
2481#+end_src
2482
2483*** offlineimap.py
2484:PROPERTIES:
2485:header-args+: :tangle ~/.offlineimap.py
2486:END:
2487
2488#+begin_src python :tangle no
2489import os
2490import subprocess
2491
2492def mailpasswd(acct):
2493 acct = os.path.basename(acct)
2494 path = "/home/amin/.passwd/%s.gpg" % acct
2495 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2496 try:
2497 return subprocess.check_output(args).strip()
2498 except subprocess.CalledProcessError:
2499 return ""
2500
2501def mailuser(acct):
2502 acct = os.path.basename(acct)
2503 path = "/home/amin/.passwd/%s" % acct
2504 args = ["cat", path]
2505 try:
2506 return subprocess.check_output(args).strip()
2507 except subprocess.CalledProcessError:
2508 return ""
2509
2510def prime_gpg_agent():
2511 ret = False
2512 i = 1
2513 while not ret:
2514 ret = (mailpasswd("prime") == "prime")
2515 if i > 2:
2516 from offlineimap.ui import getglobalui
2517 sys.stderr.write("Error reading in passwords. Terminating.\n")
2518 getglobalui().terminate()
2519 i += 1
2520 return ret
2521
2522prime_gpg_agent()
2523#+end_src
2524
8e15d300
AB
2525** pigeonhole
2526*** gnu.sieve
2527:PROPERTIES:
2528:header-args+: :tangle ~/sieve/gnu.sieve :comments none
2529:END:
2530
2531#+begin_src conf
2532require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2533
2534if anyof (
2535 address :is "from" "webmasters@gnu.org",
2536 address :is "from" "webmasters-comment@gnu.org") {
2537 fileinto :create "webmasters";
2538 stop;
2539}
2540
2541include :personal "lists";
2542#+end_src
2543
2544*** lists.sieve
2545:PROPERTIES:
2546:header-args+: :tangle ~/sieve/lists.sieve :comments none
2547:END:
2548
2549#+begin_src conf
2550require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2551 "include" ];
2552
2553if anyof (
2554 header :contains "list-id" "<emacs-devel.gnu.org>",
378b4afa
AB
2555 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2556 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2557 header :contains "list-id" "<fencepost-users.gnu.org>",
8e15d300
AB
2558 header :contains "list-id" "<guix-devel.gnu.org>",
2559 header :contains "list-id" "<guile-devel.gnu.org>",
2560 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2561 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2562 header :contains "list-id" "<www-commits.gnu.org>",
2563 header :contains "list-id" "<www-discuss.gnu.org>",
8e15d300
AB
2564 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2565 header :contains "list-id" "<haskell-cafe.haskell.org>",
378b4afa 2566 header :contains "list-id" "<haskell-art.we.lurk.org>",
8e15d300
AB
2567 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2568 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2569 set :lower "listname" "${1}";
2570 fileinto :create "l/${listname}";
2571 }
2572}
b6c1036f
AB
2573
2574if anyof (
2575 header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2576 header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2577 header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2578 header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2579 header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2580 if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2581 set :lower "username" "${1}";
2582 set :lower "listname" "${2}";
2583 fileinto :create "l/${username}/${listname}";
2584 }
2585}
8e15d300
AB
2586#+end_src
2587
1656853a
AB
2588** polybar
2589
2590*** config
2591:PROPERTIES:
2592:header-args+: :tangle ~/.config/polybar/config
2593:END:
2594
2595#+begin_src conf :tangle no
2596;=====================================================
2597;
2598; To learn more about how to configure Polybar
2599; go to https://github.com/jaagr/polybar
2600;
2601; The README contains alot of information
2602;
2603;=====================================================
2604
2605[colors]
2606;background = ${xrdb:color0:#222}
2607background = #222
2608background-alt = #444
2609;foreground = ${xrdb:color7:#222}
2610foreground = #eee
2611foreground-alt = #888
2612primary = #ffb52a
2613secondary = #e60053
2614alert = #bd2c40
2615
2616[bar/main]
2617;monitor = ${env:MONITOR:HDMI-1}
2618width = 100%
2619height = 27
2620;offset-x = 1%
2621;offset-y = 1%
2622radius = 3.0
2623fixed-center = true
2624
2625background = ${colors.background}
2626foreground = ${colors.foreground}
2627
2628line-size = 3
2629line-color = #f00
2630
2631border-size = 4
2632border-color = #00000000
2633
2634padding-left = 0
2635padding-right = 2
2636
2637module-margin-left = 2
2638module-margin-right = 2
2639
2640font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2641font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2642font-2 = Wuncon Siji:pixelsize=10;1
2643font-3 = FontAwesome:pixelsize=10;1
2644
2645modules-left = bspwm xwindow
2646modules-center =
2647modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2648
2649tray-position = right
2650tray-padding = 1
2651;tray-transparent = true
2652;tray-background = #0063ff
2653tray-maxsize = 18
2654
2655wm-restack = bspwm
2656
2657;override-redirect = true
2658
2659scroll-up = bspwm-desknext
2660scroll-down = bspwm-deskprev
2661
2662[module/xwindow]
2663type = internal/xwindow
2664label = %title:0:50:...%
2665
2666[module/xkeyboard]
2667type = internal/xkeyboard
2668blacklist-0 = num lock
2669
2670format-prefix = " "
2671format-prefix-foreground = ${colors.foreground-alt}
2672format-prefix-underline = ${colors.secondary}
2673
2674label-layout = %layout%
2675label-layout-underline = ${colors.secondary}
2676
2677label-indicator-padding = 2
2678label-indicator-margin = 1
2679label-indicator-background = ${colors.secondary}
2680label-indicator-underline = ${colors.secondary}
2681
2682[module/filesystem]
2683type = internal/fs
2684interval = 25
2685
2686mount-0 = /
2687
2688label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2689label-unmounted = %mountpoint% not mounted
2690label-unmounted-foreground = ${colors.foreground-alt}
2691
2692[module/bspwm]
2693type = internal/bspwm
2694
2695label-focused = %index%
2696label-focused-background = ${colors.background-alt}
2697label-focused-underline= ${colors.primary}
2698label-focused-padding = 2
2699
2700label-occupied = %index%
2701label-occupied-padding = 2
2702
2703label-urgent = %index%!
2704label-urgent-background = ${colors.alert}
2705label-urgent-padding = 2
2706
2707label-empty = %index%
2708label-empty-foreground = ${colors.foreground-alt}
2709label-empty-padding = 2
2710
2711[module/i3]
2712type = internal/i3
2713format = <label-state> <label-mode>
2714index-sort = true
2715wrapping-scroll = false
2716
2717; Only show workspaces on the same output as the bar
2718;pin-workspaces = true
2719
2720label-mode-padding = 2
2721label-mode-foreground = #000
2722label-mode-background = ${colors.primary}
2723
2724; focused = Active workspace on focused monitor
2725label-focused = %index%
2726label-focused-background = ${module/bspwm.label-focused-background}
2727label-focused-underline = ${module/bspwm.label-focused-underline}
2728label-focused-padding = ${module/bspwm.label-focused-padding}
2729
2730; unfocused = Inactive workspace on any monitor
2731label-unfocused = %index%
2732label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2733
2734; visible = Active workspace on unfocused monitor
2735label-visible = %index%
2736label-visible-background = ${self.label-focused-background}
2737label-visible-underline = ${self.label-focused-underline}
2738label-visible-padding = ${self.label-focused-padding}
2739
2740; urgent = Workspace with urgency hint set
2741label-urgent = %index%
2742label-urgent-background = ${module/bspwm.label-urgent-background}
2743label-urgent-padding = ${module/bspwm.label-urgent-padding}
2744
2745[module/mpd]
2746type = internal/mpd
2747format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2748
2749icon-prev = 
2750icon-stop = 
2751icon-play = 
2752icon-pause = 
2753icon-next = 
2754
2755label-song-maxlen = 25
2756label-song-ellipsis = true
2757
2758[module/xbacklight]
2759type = internal/xbacklight
2760
2761format = <label> <bar>
2762label = BL
2763
2764bar-width = 10
2765bar-indicator = |
2766bar-indicator-foreground = #ff
2767bar-indicator-font = 2
2768bar-fill = ─
2769bar-fill-font = 2
2770bar-fill-foreground = #9f78e1
2771bar-empty = ─
2772bar-empty-font = 2
2773bar-empty-foreground = ${colors.foreground-alt}
2774
2775[module/backlight-acpi]
2776inherit = module/xbacklight
2777type = internal/backlight
2778;card = intel_backlight
2779card = mba6x_backlight
2780
2781[module/cpu]
2782type = internal/cpu
2783interval = 2
2784format-prefix = " "
2785format-prefix-foreground = ${colors.foreground-alt}
2786format-underline = #f90000
2787label = %percentage%%
2788
2789[module/memory]
2790type = internal/memory
2791interval = 2
2792format-prefix = " "
2793format-prefix-foreground = ${colors.foreground-alt}
2794format-underline = #4bffdc
2795label = %percentage_used%%
2796
2797[module/wlan]
2798type = internal/network
2799interface =
2800interval = 3.0
2801
2802format-connected = <ramp-signal> <label-connected>
2803format-connected-underline = #9f78e1
2804label-connected = %essid%
2805
2806format-disconnected =
2807;format-disconnected = <label-disconnected>
2808;format-disconnected-underline = ${self.format-connected-underline}
2809;label-disconnected = %ifname% disconnected
2810;label-disconnected-foreground = ${colors.foreground-alt}
2811
2812ramp-signal-0 = 
2813ramp-signal-1 = 
2814ramp-signal-2 = 
2815ramp-signal-3 = 
2816ramp-signal-4 = 
2817ramp-signal-foreground = ${colors.foreground-alt}
2818
2819[module/eth]
2820type = internal/network
2821interface =
2822interval = 3.0
2823
2824format-connected-underline = #55aa55
2825format-connected-prefix = " "
2826format-connected-prefix-foreground = ${colors.foreground-alt}
2827label-connected = %local_ip%
2828
2829format-disconnected =
2830;format-disconnected = <label-disconnected>
2831;format-disconnected-underline = ${self.format-connected-underline}
2832;label-disconnected = %ifname% disconnected
2833;label-disconnected-foreground = ${colors.foreground-alt}
2834
2835[module/date]
2836type = internal/date
2837interval = 5
2838
2839date =
2840date-alt = " %Y-%m-%d"
2841
2842time = %H:%M
2843time-alt = %H:%M:%S
2844
2845format-prefix = 
2846format-prefix-foreground = ${colors.foreground-alt}
2847format-underline = #0a6cf5
2848
2849label = %date% %time%
2850
2851[module/volume]
2852type = internal/volume
2853
2854format-volume = <label-volume> <bar-volume>
2855label-volume = vol
2856label-volume-foreground = ${root.foreground}
2857
2858format-muted-prefix = " "
2859format-muted-foreground = ${colors.foreground-alt}
2860label-muted = mute
2861
2862bar-volume-width = 10
2863bar-volume-foreground-0 = #55aa55
2864bar-volume-foreground-1 = #55aa55
2865bar-volume-foreground-2 = #55aa55
2866bar-volume-foreground-3 = #55aa55
2867bar-volume-foreground-4 = #55aa55
2868bar-volume-foreground-5 = #f5a70a
2869bar-volume-foreground-6 = #ff5555
2870bar-volume-gradient = false
2871bar-volume-indicator = |
2872bar-volume-indicator-font = 2
2873bar-volume-fill = ─
2874bar-volume-fill-font = 2
2875bar-volume-empty = ─
2876bar-volume-empty-font = 2
2877bar-volume-empty-foreground = ${colors.foreground-alt}
2878
2879[module/battery]
2880type = internal/battery
2881battery = BAT0
2882adapter = ADP1
2883full-at = 64
2884
2885format-charging = <animation-charging> <label-charging>
2886format-charging-underline = #ffb52a
2887
2888format-discharging = <ramp-capacity> <label-discharging>
2889format-discharging-underline = ${self.format-charging-underline}
2890
2891format-full-prefix = " "
2892format-full-prefix-foreground = ${colors.foreground-alt}
2893format-full-underline = ${self.format-charging-underline}
2894
2895ramp-capacity-0 = 
2896ramp-capacity-1 = 
2897ramp-capacity-2 = 
2898ramp-capacity-foreground = ${colors.foreground-alt}
2899
2900animation-charging-0 = 
2901animation-charging-1 = 
2902animation-charging-2 = 
2903animation-charging-foreground = ${colors.foreground-alt}
2904animation-charging-framerate = 750
2905
2906[module/temperature]
2907type = internal/temperature
2908thermal-zone = 1
2909warn-temperature = 66
2910
2911format = <ramp> <label>
2912format-underline = #f50a4d
2913format-warn = <ramp> <label-warn>
2914format-warn-underline = ${self.format-underline}
2915
2916label = %temperature%
2917label-warn = %temperature%
2918label-warn-foreground = ${colors.secondary}
2919
2920ramp-0 = 
2921ramp-1 = 
2922ramp-2 = 
2923ramp-foreground = ${colors.foreground-alt}
2924
2925[module/powermenu]
2926type = custom/menu
2927
2928format-spacing = 1
2929
2930label-open = 
2931label-open-foreground = ${colors.secondary}
2932label-close =  cancel
2933label-close-foreground = ${colors.secondary}
2934label-separator = |
2935label-separator-foreground = ${colors.foreground-alt}
2936
2937menu-0-0 = reboot
2938menu-0-0-exec = menu-open-1
2939menu-0-1 = power off
2940menu-0-1-exec = menu-open-2
2941
2942menu-1-0 = cancel
2943menu-1-0-exec = menu-open-0
2944menu-1-1 = reboot
2945menu-1-1-exec = sudo reboot
2946
2947menu-2-0 = power off
2948menu-2-0-exec = sudo poweroff
2949menu-2-1 = cancel
2950menu-2-1-exec = menu-open-0
2951
2952[module/mail]
2953type = custom/script
2954interval = 60
2955format = <label>
2956format-prefix = " "
2957format-prefix-foreground = ${colors.foreground-alt}
2958format-underline = #0a6cf5
2959exec = notmuch count tag:unread
2960
2961[settings]
2962screenchange-reload = true
2963;compositing-background = xor
2964;compositing-background = screen
2965;compositing-foreground = source
2966;compositing-border = over
2967
2968[global/wm]
2969margin-top = 0
2970margin-bottom = 0
2971
2972; vim:ft=dosini
2973#+end_src
2974
2975*** polybar-launch
2976:PROPERTIES:
2e877d14 2977:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
1656853a
AB
2978:END:
2979
2e877d14 2980#+begin_src sh :tangle no
1656853a
AB
2981# Terminate already running bar instances
2982killall -q polybar
2983
2984# Wait until the processes have been shut down
2985while pgrep -x polybar >/dev/null; do sleep 1; done
2986
2987# Launch main bar
2988polybar main &
2989
2990echo "Bars launched..."
2991#+end_src
2992
b165a3e5
AB
2993** PowerTOP
2994:PROPERTIES:
2995:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2996:END:
2997
2998#+begin_src conf
2999[Unit]
3000Description=Powertop tunings
3001
3002[Service]
3003ExecStart=/usr/bin/powertop --auto-tune
3004RemainAfterExit=true
3005
3006[Install]
3007WantedBy=multi-user.target
3008#+end_src
3009
1656853a
AB
3010** ranger
3011
3012*** rc.conf
3013:PROPERTIES:
3014:header-args+: :tangle ~/.config/ranger/rc.conf
3015:END:
3016
3017#+begin_src conf :tangle no
3018# ===================================================================
3019# This file contains the default startup commands for ranger.
3020# To change them, it is recommended to create the file
3021# ~/.config/ranger/rc.conf and add your custom commands there.
3022#
3023# If you copy this whole file there, you may want to set the environment
3024# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
3025#
3026# The purpose of this file is mainly to define keybindings and settings.
3027# For running more complex python code, please create a plugin in "plugins/" or
3028# a command in "commands.py".
3029#
3030# Each line is a command that will be run before the user interface
3031# is initialized. As a result, you can not use commands which rely
3032# on the UI such as :delete or :mark.
3033# ===================================================================
3034
3035# ===================================================================
3036# == Options
3037# ===================================================================
3038
3039# How many columns are there, and what are their relative widths?
3040set column_ratios 1,3,4
3041
3042# Which files should be hidden? (regular expression)
3043set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
3044
3045# Show hidden files? You can toggle this by typing 'zh'
3046set show_hidden false
3047
3048# Ask for a confirmation when running the "delete" command?
3049# Valid values are "always" (default), "never", "multiple"
3050# With "multiple", ranger will ask only if you delete multiple files at once.
3051set confirm_on_delete multiple
3052
3053# Which script is used to generate file previews?
3054# ranger ships with scope.sh, a script that calls external programs (see
3055# README for dependencies) to preview images, archives, etc.
3056set preview_script ~/.config/ranger/scope.sh
3057
3058# Use the external preview script or display simple plain text previews?
3059set use_preview_script true
3060
3061# Open all images in this directory when running certain image viewers
3062# like feh or sxiv? You can still open selected files by marking them.
3063set open_all_images true
3064
3065# Be aware of version control systems and display information.
3066set vcs_aware false
3067
3068# State of the three backends git, hg, bzr. The possible states are
3069# disabled, local (only show local info), enabled (show local and remote
3070# information).
3071set vcs_backend_git enabled
3072set vcs_backend_hg disabled
3073set vcs_backend_bzr disabled
3074
3075# Preview images in full color with the external command "w3mimgpreview"?
3076# This requires the console web browser "w3m" and a supported terminal.
3077# It has been successfully tested with "xterm" and "urxvt" without tmux.
3078set preview_images true
3079
3080# Use a unicode "..." character to mark cut-off filenames?
3081set unicode_ellipsis false
3082
3083# Show dotfiles in the bookmark preview box?
3084set show_hidden_bookmarks true
3085
3086# Which colorscheme to use? These colorschemes are available by default:
3087# default, jungle, snow
3088set colorscheme default
3089
3090# Preview files on the rightmost column?
3091# And collapse (shrink) the last column if there is nothing to preview?
3092set preview_files true
3093set preview_directories true
3094set collapse_preview true
3095
3096# Save the console history on exit?
3097set save_console_history true
3098
3099# Draw the status bar on top of the browser window (default: bottom)
3100set status_bar_on_top false
3101
3102# Draw a progress bar in the status bar which displays the average state of all
3103# currently running tasks which support progress bars?
3104set draw_progress_bar_in_status_bar true
3105
3106# Draw borders around columns?
3107set draw_borders true
3108
3109# Display the directory name in tabs?
3110set dirname_in_tabs false
3111
3112# Enable the mouse support?
3113set mouse_enabled true
3114
3115# Display the file size in the main column or status bar?
3116set display_size_in_main_column true
3117set display_size_in_status_bar true
3118
3119# Display files tags in all columns or only in main column?
3120set display_tags_in_all_columns true
3121
3122# Set a title for the window?
3123set update_title false
3124
3125# Set the title to "ranger" in the tmux program?
3126set update_tmux_title false
3127
3128# Shorten the title if it gets long? The number defines how many
3129# directories are displayed at once, 0 turns off this feature.
3130set shorten_title 3
3131
3132# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3133set tilde_in_titlebar false
3134
3135# How many directory-changes or console-commands should be kept in history?
3136set max_history_size 20
3137set max_console_history_size 50
3138
3139# Try to keep so much space between the top/bottom border when scrolling:
3140set scroll_offset 8
3141
3142# Flush the input after each key hit? (Noticable when ranger lags)
3143set flushinput true
3144
3145# Padding on the right when there's no preview?
3146# This allows you to click into the space to run the file.
3147set padding_right true
3148
3149# Save bookmarks (used with mX and `X) instantly?
3150# This helps to synchronize bookmarks between multiple ranger
3151# instances but leads to *slight* performance loss.
3152# When false, bookmarks are saved when ranger is exited.
3153set autosave_bookmarks true
3154
3155# You can display the "real" cumulative size of directories by using the
3156# command :get_cumulative_size or typing "dc". The size is expensive to
3157# calculate and will not be updated automatically. You can choose
3158# to update it automatically though by turning on this option:
3159set autoupdate_cumulative_size false
3160
3161# Turning this on makes sense for screen readers:
3162set show_cursor false
3163
3164# One of: size, basename, mtime, type
3165set sort natural
3166
3167# Additional sorting options
3168set sort_reverse false
3169set sort_case_insensitive true
3170set sort_directories_first true
3171
3172# Enable this if key combinations with the Alt Key don't work for you.
3173# (Especially on xterm)
3174set xterm_alt_key false
3175
3176# ===================================================================
3177# == Local Options
3178# ===================================================================
3179# You can set local options that only affect a single directory.
3180
3181# Examples:
3182# setlocal path=~/downloads sort mtime
3183
3184# ===================================================================
3185# == Command Aliases in the Console
3186# ===================================================================
3187
3188alias e edit
3189alias q quit
3190alias q! quitall
3191alias qall quitall
3192alias setl setlocal
3193
3194alias filter scout -prt
3195alias find scout -aet
3196alias mark scout -mr
3197alias unmark scout -Mr
3198alias search scout -rs
3199alias search_inc scout -rts
3200alias travel scout -aefiklst
3201
3202# ===================================================================
3203# == Define keys for the browser
3204# ===================================================================
3205
3206# Basic
3207map Q quit!
3208map q quit
3209copymap q ZZ ZQ
3210
3211map R reload_cwd
3212map <C-r> reset
3213map <C-l> redraw_window
3214map <C-c> abort
3215map <esc> change_mode normal
3216
3217map i display_file
3218map ? help
3219map W display_log
3220map w taskview_open
3221map S shell $SHELL
3222
3223map : console
3224map ; console
3225map ! console shell
3226map @ console -p6 shell %%s
3227map # console shell -p
3228map s console shell
3229map r chain draw_possible_programs; console open_with
3230map f console find
3231map cd console cd
3232
3233# Tagging / Marking
3234map t tag_toggle
3235map ut tag_remove
3236map "<any> tag_toggle tag=%any
3237map <Space> mark_files toggle=True
3238map v mark_files all=True toggle=True
3239map uv mark_files all=True val=False
3240map V toggle_visual_mode
3241map uV toggle_visual_mode reverse=True
3242
3243# For the nostalgics: Midnight Commander bindings
3244map <F1> help
3245map <F3> display_file
3246map <F4> edit
3247map <F5> copy
3248map <F6> cut
3249map <F7> console mkdir
3250map <F8> console delete
3251map <F10> exit
3252
3253# In case you work on a keyboard with dvorak layout
3254map <UP> move up=1
3255map <DOWN> move down=1
3256map <LEFT> move left=1
3257map <RIGHT> move right=1
3258map <HOME> move to=0
3259map <END> move to=-1
3260map <PAGEDOWN> move down=1 pages=True
3261map <PAGEUP> move up=1 pages=True
3262map <CR> move right=1
3263map <DELETE> console delete
3264map <INSERT> console touch
3265
3266# VIM-like
3267copymap <UP> k
3268copymap <DOWN> j
3269copymap <LEFT> h
3270copymap <RIGHT> l
3271copymap <HOME> gg
3272copymap <END> G
3273copymap <PAGEDOWN> <C-F>
3274copymap <PAGEUP> <C-B>
3275
3276map J move down=0.5 pages=True
3277map K move up=0.5 pages=True
3278copymap J <C-D>
3279copymap K <C-U>
3280
3281# Jumping around
3282map H history_go -1
3283map L history_go 1
3284map ] move_parent 1
3285map [ move_parent -1
3286map } traverse
3287
3288map gh cd ~
3289map ge cd /etc
3290map gu cd /usr
3291map gd cd /dev
3292map gl cd -r .
3293map gL cd -r %f
3294map go cd /opt
3295map gv cd /var
3296map gm cd /media
3297map gM cd /mnt
3298map gs cd /srv
3299map gr cd /
3300map gR eval fm.cd(ranger.RANGERDIR)
3301map g/ cd /
3302map g? cd /usr/share/doc/ranger
3303
3304# External Programs
3305map E edit
3306map du shell -p du --max-depth=1 -h --apparent-size
3307map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3308map yp shell -d echo -n %d/%f | xsel -i
3309map yd shell -d echo -n %d | xsel -i
3310map yn shell -d echo -n %f | xsel -i
3311
3312# Filesystem Operations
3313map = chmod
3314
3315map cw console rename
3316map A eval fm.open_console('rename ' + fm.thisfile.basename)
3317map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3318
3319map pp paste
3320map po paste overwrite=True
3321map pl paste_symlink relative=False
3322map pL paste_symlink relative=True
3323map phl paste_hardlink
3324map pht paste_hardlinked_subtree
3325
3326map dd cut
3327map ud uncut
3328map da cut mode=add
3329map dr cut mode=remove
3330
3331map yy copy
3332map uy uncut
3333map ya copy mode=add
3334map yr copy mode=remove
3335
3336# Temporary workarounds
3337map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3338map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3339map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3340map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3341map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3342map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3343map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3344map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3345
3346# Searching
3347map / console search
3348map n search_next
3349map N search_next forward=False
3350map ct search_next order=tag
3351map cs search_next order=size
3352map ci search_next order=mimetype
3353map cc search_next order=ctime
3354map cm search_next order=mtime
3355map ca search_next order=atime
3356
3357# Tabs
3358map <C-n> tab_new ~
3359map <C-w> tab_close
3360map <TAB> tab_move 1
3361map <S-TAB> tab_move -1
3362map <A-Right> tab_move 1
3363map <A-Left> tab_move -1
3364map gt tab_move 1
3365map gT tab_move -1
3366map gn tab_new ~
3367map gc tab_close
3368map uq tab_restore
3369map <a-1> tab_open 1
3370map <a-2> tab_open 2
3371map <a-3> tab_open 3
3372map <a-4> tab_open 4
3373map <a-5> tab_open 5
3374map <a-6> tab_open 6
3375map <a-7> tab_open 7
3376map <a-8> tab_open 8
3377map <a-9> tab_open 9
3378
3379# Sorting
3380map or toggle_option sort_reverse
3381map os chain set sort=size; set sort_reverse=False
3382map ob chain set sort=basename; set sort_reverse=False
3383map on chain set sort=natural; set sort_reverse=False
3384map om chain set sort=mtime; set sort_reverse=False
3385map oc chain set sort=ctime; set sort_reverse=False
3386map oa chain set sort=atime; set sort_reverse=False
3387map ot chain set sort=type; set sort_reverse=False
3388
3389map oS chain set sort=size; set sort_reverse=True
3390map oB chain set sort=basename; set sort_reverse=True
3391map oN chain set sort=natural; set sort_reverse=True
3392map oM chain set sort=mtime; set sort_reverse=True
3393map oC chain set sort=ctime; set sort_reverse=True
3394map oA chain set sort=atime; set sort_reverse=True
3395map oT chain set sort=type; set sort_reverse=True
3396
3397map dc get_cumulative_size
3398
3399# Settings
3400map zc toggle_option collapse_preview
3401map zd toggle_option sort_directories_first
3402map zh toggle_option show_hidden
3403map <C-h> toggle_option show_hidden
3404map zi toggle_option flushinput
3405map zm toggle_option mouse_enabled
3406map zp toggle_option preview_files
3407map zP toggle_option preview_directories
3408map zs toggle_option sort_case_insensitive
3409map zu toggle_option autoupdate_cumulative_size
3410map zv toggle_option use_preview_script
3411map zf console filter
3412
3413# Bookmarks
3414map `<any> enter_bookmark %any
3415map '<any> enter_bookmark %any
3416map m<any> set_bookmark %any
3417map um<any> unset_bookmark %any
3418
3419map m<bg> draw_bookmarks
3420copymap m<bg> um<bg> `<bg> '<bg>
3421
3422# Generate all the chmod bindings with some python help:
3423eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3424eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3425eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3426eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3427eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3428
3429eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3430eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3431eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3432eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3433eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3434
3435# ===================================================================
3436# == Define keys for the console
3437# ===================================================================
3438# Note: Unmapped keys are passed directly to the console.
3439
3440# Basic
3441cmap <tab> eval fm.ui.console.tab()
3442cmap <s-tab> eval fm.ui.console.tab(-1)
3443cmap <ESC> eval fm.ui.console.close()
3444cmap <CR> eval fm.ui.console.execute()
3445cmap <C-l> redraw_window
3446
3447copycmap <ESC> <C-c>
3448copycmap <CR> <C-j>
3449
3450# Move around
3451cmap <up> eval fm.ui.console.history_move(-1)
3452cmap <down> eval fm.ui.console.history_move(1)
3453cmap <left> eval fm.ui.console.move(left=1)
3454cmap <right> eval fm.ui.console.move(right=1)
3455cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3456cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3457
3458# Line Editing
3459cmap <backspace> eval fm.ui.console.delete(-1)
3460cmap <delete> eval fm.ui.console.delete(0)
3461cmap <C-w> eval fm.ui.console.delete_word()
3462cmap <C-k> eval fm.ui.console.delete_rest(1)
3463cmap <C-u> eval fm.ui.console.delete_rest(-1)
3464cmap <C-y> eval fm.ui.console.paste()
3465
3466# And of course the emacs way
3467copycmap <up> <C-p>
3468copycmap <down> <C-n>
3469copycmap <left> <C-b>
3470copycmap <right> <C-f>
3471copycmap <home> <C-a>
3472copycmap <end> <C-e>
3473copycmap <delete> <C-d>
3474copycmap <backspace> <C-h>
3475
3476# Note: There are multiple ways to express backspaces. <backspace> (code 263)
3477# and <backspace2> (code 127). To be sure, use both.
3478copycmap <backspace> <backspace2>
3479
3480# This special expression allows typing in numerals:
3481cmap <allow_quantifiers> false
3482
3483# ===================================================================
3484# == Pager Keybindings
3485# ===================================================================
3486
3487# Movement
3488pmap <down> pager_move down=1
3489pmap <up> pager_move up=1
3490pmap <left> pager_move left=4
3491pmap <right> pager_move right=4
3492pmap <home> pager_move to=0
3493pmap <end> pager_move to=-1
3494pmap <pagedown> pager_move down=1.0 pages=True
3495pmap <pageup> pager_move up=1.0 pages=True
3496pmap <C-d> pager_move down=0.5 pages=True
3497pmap <C-u> pager_move up=0.5 pages=True
3498
3499copypmap <UP> k <C-p>
3500copypmap <DOWN> j <C-n> <CR>
3501copypmap <LEFT> h
3502copypmap <RIGHT> l
3503copypmap <HOME> g
3504copypmap <END> G
3505copypmap <C-d> d
3506copypmap <C-u> u
3507copypmap <PAGEDOWN> n f <C-F> <Space>
3508copypmap <PAGEUP> p b <C-B>
3509
3510# Basic
3511pmap <ESC> pager_close
3512copypmap <ESC> q Q i <F3>
3513pmap E edit_file
3514
3515# ===================================================================
3516# == Taskview Keybindings
3517# ===================================================================
3518
3519# Movement
3520tmap <up> taskview_move up=1
3521tmap <down> taskview_move down=1
3522tmap <home> taskview_move to=0
3523tmap <end> taskview_move to=-1
3524tmap <pagedown> taskview_move down=1.0 pages=True
3525tmap <pageup> taskview_move up=1.0 pages=True
3526tmap <C-d> taskview_move down=0.5 pages=True
3527tmap <C-u> taskview_move up=0.5 pages=True
3528
3529copytmap <UP> k <C-p>
3530copytmap <DOWN> j <C-n> <CR>
3531copytmap <HOME> g
3532copytmap <END> G
3533copytmap <C-u> u
3534copytmap <PAGEDOWN> n f <C-F> <Space>
3535copytmap <PAGEUP> p b <C-B>
3536
3537# Changing priority and deleting tasks
3538tmap J eval -q fm.ui.taskview.task_move(-1)
3539tmap K eval -q fm.ui.taskview.task_move(0)
3540tmap dd eval -q fm.ui.taskview.task_remove()
3541tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3542tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3543tmap <delete> eval -q fm.ui.taskview.task_remove()
3544
3545# Basic
3546tmap <ESC> taskview_close
3547copytmap <ESC> q Q w <C-c>
3548#+end_src
3549
3550*** scope.sh
3551:PROPERTIES:
2e877d14 3552:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
1656853a
AB
3553:END:
3554
2e877d14 3555#+begin_src sh :tangle no
1656853a
AB
3556# ranger supports enhanced previews. If the option "use_preview_script"
3557# is set to True and this file exists, this script will be called and its
3558# output is displayed in ranger. ANSI color codes are supported.
3559
3560# NOTES: This script is considered a configuration file. If you upgrade
3561# ranger, it will be left untouched. (You must update it yourself.)
3562# Also, ranger disables STDIN here, so interactive scripts won't work properly
3563
3564# Meanings of exit codes:
3565# code | meaning | action of ranger
3566# -----+------------+-------------------------------------------
3567# 0 | success | success. display stdout as preview
3568# 1 | no preview | failure. display no preview at all
3569# 2 | plain text | display the plain content of the file
3570# 3 | fix width | success. Don't reload when width changes
3571# 4 | fix height | success. Don't reload when height changes
3572# 5 | fix both | success. Don't ever reload
3573
3574# Meaningful aliases for arguments:
3575path="$1" # Full path of the selected file
3576width="$2" # Width of the preview pane (number of fitting characters)
3577height="$3" # Height of the preview pane (number of fitting characters)
3578
3579maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3580
3581# Find out something about the file:
3582mimetype=$(file --mime-type -Lb "$path")
3583extension=${path##*.}
3584
3585# Functions:
3586# runs a command and saves its output into $output. Useful if you need
3587# the return value AND want to use the output in a pipe
3588try() { output=$(eval '"$@"'); }
3589
3590# writes the output of the previouosly used "try" command
3591dump() { echo "$output"; }
3592
3593# a common post-processing function used after most commands
3594trim() { head -n "$maxln"; }
3595
3596# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3597highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3598
3599case "$extension" in
3600 # Archive extensions:
3601 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3602 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3603 try als "$path" && { dump | trim; exit 0; }
3604 try acat "$path" && { dump | trim; exit 3; }
3605 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3606 exit 1;;
3607 rar)
3608 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3609 # PDF documents:
3610 pdf)
3611 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3612 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3613 # BitTorrent Files
3614 torrent)
3615 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3616 # HTML Pages:
3617 htm|html|xhtml)
3618 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3619 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3620 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3621 ;; # fall back to highlight/cat if the text browsers fail
3622esac
3623
3624case "$mimetype" in
3625 # Syntax highlight for text files:
3626 text/* | */xml)
3627 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3628 # Ascii-previews of images:
3629 image/*)
3630 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3631 # Display information about media files:
3632 video/* | audio/*)
3633 exiftool "$path" && exit 5
3634 # Use sed to remove spaces so the output fits into the narrow window
3635 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3636esac
3637
3638exit 1
3639#+end_src
3640
2f1dcf9d
AB
3641** redshift
3642:PROPERTIES:
e2149232 3643:header-args+: :tangle ~/.config/redshift.conf :comments none
2f1dcf9d
AB
3644:END:
3645
3646#+begin_src conf
3647; Global settings for redshift
3648[redshift]
3649; Set the day and night screen temperatures (Neutral is 6500K)
3650;temp-day=5700
3651;temp-night=3500
3652
3653;temp-day=6500
3654temp-day=6200
3655;temp-night=4800
3656;temp-night=5000
3657;temp-night=4500
3658temp-night=4000
3659
3660; Enable/Disable a smooth transition between day and night
3661; 0 will cause a direct change from day to night screen temperature.
3662; 1 will gradually increase or decrease the screen temperature.
3663transition=1
3664
3665; Set the screen brightness. Default is 1.0.
3666;brightness=0.9
3667; It is also possible to use different settings for day and night
3668; since version 1.8.
3669;brightness-day=0.7
3670;brightness-night=0.4
3671; Set the screen gamma (for all colors, or each color channel
3672; individually)
3673;gamma=0.8
3674;gamma=1.0
3675;gamma=0.8:0.7:0.8
3676; This can also be set individually for day and night since
3677; version 1.10.
3678;gamma-day=0.8:0.7:0.8
3679;gamma-night=0.6
3680
3681; Set the location-provider: 'geoclue2' or 'manual'
3682; type 'redshift -l list' to see possible values.
3683; The location provider settings are in a different section.
3684;location-provider=manual
3685location-provider=geoclue2
3686
3687; Set the adjustment-method: 'randr', 'vidmode'
3688; type 'redshift -m list' to see all possible values.
3689; 'randr' is the preferred method, 'vidmode' is an older API.
3690; but works in some cases when 'randr' does not.
3691; The adjustment method settings are in a different section.
3692adjustment-method=randr
3693
3694; Configuration of the location-provider:
3695; type 'redshift -l PROVIDER:help' to see the settings.
3696; ex: 'redshift -l manual:help'
3697; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3698; are negative numbers.
3699;[manual]
3700;lat=48.1
3701;lon=11.6
3702
3703; Configuration of the adjustment-method
3704; type 'redshift -m METHOD:help' to see the settings.
3705; ex: 'redshift -m randr:help'
3706; In this example, randr is configured to adjust screen 1.
3707; Note that the numbering starts from 0, so this is actually the
3708; second screen. If this option is not specified, Redshift will try
3709; to adjust _all_ screens.
3710;[randr]
3711;screen=1
3712#+end_src
3713
3714** rofi
3715:PROPERTIES:
3716:header-args+: :tangle ~/.config/rofi/config
3717:END:
3718
3719#+begin_src conf
1f2bc66e 3720! rofi.font: Ubuntu Mono 13
2f1dcf9d
AB
3721! rofi.font: Inconsolata 16
3722! rofi.font: Iosevka 13
3723! rofi.font: Source Code Pro 11
1f2bc66e 3724rofi.font: Source Code Pro 10.5
2f1dcf9d
AB
3725rofi.modi: run,window
3726! rofi.width: 640
3727rofi.width: 600
3728!rofi.location: 2
3729!rofi.yoffset: 200
3730rofi.monitor: -1
3731!rofi.lines: 10
3732
3733!rofi.theme: /usr/share/rofi/themes//Arc.rasi
3734!rofi.theme: /usr/share/rofi/themes//Paper.rasi
3735!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3736
3737rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3738#+end_src
3739
3740** rofi-pass
3741:PROPERTIES:
3742:header-args+: :tangle ~/.config/rofi-pass/config
3743:END:
3744
3745#+begin_src conf
3746# permanently set alternative root dir
3747# root=/path/to/root
3748
3749# rofi command. Make sure to have "$@" as last argument
3750_rofi () {
3751 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
61f337f4 3752 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
2f1dcf9d
AB
3753}
3754
3755# xdotool needs the keyboard layout to be set using setxkbmap
3756# You can do this in your autostart scripts (e.g. xinitrc)
3757
3758# If for some reason, you cannot do this, you can set the command here.
3759# and set fix_layout to true
3760fix_layout=false
3761
3762layout_cmd () {
3763 setxkbmap us
3764}
3765
3766# fields to be used
3767URL_field='url'
3768USERNAME_field='user'
3769AUTOTYPE_field='autotype'
3770
3771# delay to be used for :delay keyword
3772delay=2
3773
3774## Programs to be used
3775# Editor
3776EDITOR='gvim -f'
3777
3778# Browser
3779BROWSER='chromium'
3780
3781## Misc settings
3782
3783default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3784auto_enter='false'
3785notify='false'
3786default_autotype='user :tab pass'
3787
3788# color of the help messages
3789# leave empty for autodetection
3790help_color="#4872FF"
3791
3792# Clipboard settings
3793# Possible options: primary, clipboard, both
3794clip=primary
3795
3796# Options for generating new password entries
3797# default_user is also used for password files that have no user field.
3798default_user=aminb
3799default_user2=aminban
3800password_length=30
3801
3802# Custom Keybindings
3803#autotype="Alt+1"
3804autotype="Alt+m"
3805type_user="Alt+2"
3806type_pass="Alt+3"
3807open_url="Alt+4"
3808copy_name="Alt+u"
3809copy_url="Alt+l"
3810copy_pass="Alt+p"
3811show="Alt+o"
3812copy_entry="Alt+2"
3813type_entry="Alt+1"
3814copy_menu="Alt+c"
3815action_menu="Alt+a"
3816type_menu="Alt+t"
3817help="Alt+h"
3818switch="Alt+x"
3819insert_pass="Alt+n"
3820#+end_src
3821
fb52d1f9 3822** sway
5b09427d
AB
3823
3824*** main
fb52d1f9
AB
3825:PROPERTIES:
3826:header-args+: :tangle ~/.config/sway/config
3827:END:
3828
3829#+begin_src conf
fb52d1f9 3830### Variables
373851f8 3831# super
fb52d1f9 3832set $mod Mod4
373851f8
AB
3833# alt
3834set $mod2 Mod1
fb52d1f9
AB
3835set $left h
3836set $down j
3837set $up k
3838set $right l
fb52d1f9 3839set $term urxvt
d6cb3a4a 3840set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
fb52d1f9
AB
3841
3842### Output configuration
3843#
3844# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3845output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3846#
3847# Example configuration:
3848#
3849# output HDMI-A-1 resolution 1920x1080 position 1920,0
3850#
3851# You can get the names of your outputs by running: swaymsg -t get_outputs
3852
3853### Idle configuration
ad65bea0
AB
3854
3855exec swayidle \
405e14e9
AB
3856 timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
3857 resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
ad65bea0 3858 before-sleep swaylock
fb52d1f9 3859
fb52d1f9
AB
3860
3861### Key bindings
3862#
3863# Basics:
3864#
3865 # start a terminal
3866 bindsym $mod+Return exec $term
3867
3868 # kill focused window
3869 bindsym $mod+Shift+q kill
3870
3871 # start your launcher
3872 bindsym $mod+d exec $menu
3873
40085087 3874 # password manager
71668c89 3875 bindsym $mod2+space exec rofi-pass
40085087 3876
fb52d1f9
AB
3877 # Drag floating windows by holding down $mod and left mouse button.
3878 # Resize them with right mouse button + $mod.
b41bfb27
AB
3879 # Despite the name, also works for non-floating windows.
3880 # Change normal to inverse to use left mouse button for resizing and right
3881 # mouse button for dragging.
3882 floating_modifier $mod normal
fb52d1f9
AB
3883
3884 # reload the configuration file
3885 bindsym $mod+Shift+c reload
3886
3887 # exit sway (logs you out of your wayland session)
3888 bindsym $mod+Shift+e exit
d6cb3a4a
AB
3889
3890 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3891 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3892 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3893
8e4862e2
AB
3894 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3895 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3896 bindsym XF86AudioMute exec pamixer --toggle-mute
3897 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3898
373851f8 3899 # original sway workspace switch and window move
1e3c1c15
AB
3900 bindsym $mod+bracketleft workspace prev
3901 bindsym $mod+bracketright workspace next
3902 bindsym $mod+braceleft move container to workspace prev
3903 bindsym $mod+braceright move container to workspace next
3904
3905 # bspwm-esque workspace switch and window move
3906 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3907 bindsym $mod2+bracketright exec sway-ws-util switch next
3908 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3909 bindsym $mod2+braceright exec sway-ws-util move next follow
fb52d1f9
AB
3910#
3911# Moving around:
3912#
3913 # Move your focus around
3914 bindsym $mod+$left focus left
3915 bindsym $mod+$down focus down
3916 bindsym $mod+$up focus up
3917 bindsym $mod+$right focus right
3918 # or use $mod+[up|down|left|right]
3919 bindsym $mod+Left focus left
3920 bindsym $mod+Down focus down
3921 bindsym $mod+Up focus up
3922 bindsym $mod+Right focus right
3923
3924 # _move_ the focused window with the same, but add Shift
3925 bindsym $mod+Shift+$left move left
3926 bindsym $mod+Shift+$down move down
3927 bindsym $mod+Shift+$up move up
3928 bindsym $mod+Shift+$right move right
3929 # ditto, with arrow keys
3930 bindsym $mod+Shift+Left move left
3931 bindsym $mod+Shift+Down move down
3932 bindsym $mod+Shift+Up move up
3933 bindsym $mod+Shift+Right move right
3934#
3935# Workspaces:
3936#
3937 # switch to workspace
3938 bindsym $mod+1 workspace 1
3939 bindsym $mod+2 workspace 2
3940 bindsym $mod+3 workspace 3
3941 bindsym $mod+4 workspace 4
3942 bindsym $mod+5 workspace 5
3943 bindsym $mod+6 workspace 6
3944 bindsym $mod+7 workspace 7
3945 bindsym $mod+8 workspace 8
3946 bindsym $mod+9 workspace 9
3947 bindsym $mod+0 workspace 10
3948 # move focused container to workspace
3949 bindsym $mod+Shift+1 move container to workspace 1
3950 bindsym $mod+Shift+2 move container to workspace 2
3951 bindsym $mod+Shift+3 move container to workspace 3
3952 bindsym $mod+Shift+4 move container to workspace 4
3953 bindsym $mod+Shift+5 move container to workspace 5
3954 bindsym $mod+Shift+6 move container to workspace 6
3955 bindsym $mod+Shift+7 move container to workspace 7
3956 bindsym $mod+Shift+8 move container to workspace 8
3957 bindsym $mod+Shift+9 move container to workspace 9
3958 bindsym $mod+Shift+0 move container to workspace 10
3959 # Note: workspaces can have any name you want, not just numbers.
3960 # We just use 1-10 as the default.
3961#
3962# Layout stuff:
3963#
3964 # You can "split" the current object of your focus with
3965 # $mod+b or $mod+v, for horizontal and vertical splits
3966 # respectively.
3967 bindsym $mod+b splith
3968 bindsym $mod+v splitv
3969
3970 # Switch the current container between different layout styles
3971 bindsym $mod+s layout stacking
3972 bindsym $mod+w layout tabbed
3973 bindsym $mod+e layout toggle split
3974
3975 # Make the current focus fullscreen
3976 bindsym $mod+f fullscreen
3977
3978 # Toggle the current focus between tiling and floating mode
3979 bindsym $mod+Shift+space floating toggle
3980
3981 # Swap focus between the tiling area and the floating area
3982 bindsym $mod+space focus mode_toggle
3983
3984 # move focus to the parent container
3985 bindsym $mod+a focus parent
3986#
3987# Scratchpad:
3988#
3989 # Sway has a "scratchpad", which is a bag of holding for windows.
3990 # You can send windows there and get them back later.
3991
3992 # Move the currently focused window to the scratchpad
3993 bindsym $mod+Shift+minus move scratchpad
3994
3995 # Show the next scratchpad window or hide the focused scratchpad window.
3996 # If there are multiple scratchpad windows, this command cycles through them.
3997 bindsym $mod+minus scratchpad show
3998#
3999# Resizing containers:
4000#
4001mode "resize" {
4002 # left will shrink the containers width
4003 # right will grow the containers width
4004 # up will shrink the containers height
4005 # down will grow the containers height
4006 bindsym $left resize shrink width 10px
4007 bindsym $down resize grow height 10px
4008 bindsym $up resize shrink height 10px
4009 bindsym $right resize grow width 10px
4010
4011 # ditto, with arrow keys
4012 bindsym Left resize shrink width 10px
4013 bindsym Down resize grow height 10px
4014 bindsym Up resize shrink height 10px
4015 bindsym Right resize grow width 10px
4016
4017 # return to default mode
4018 bindsym Return mode "default"
4019 bindsym Escape mode "default"
4020}
eb186a5a 4021bindsym $mod+Shift+r mode "resize"
fb52d1f9 4022
11a97c68
AB
4023#
4024# Power button
4025#
11a97c68
AB
4026
4027set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
4028mode "$mode_system" {
93f6bf1a
AB
4029 bindsym l exec swaylock, mode "default"
4030 bindsym e exec swaymsg exit, mode "default"
4031 bindsym s exec systemctl suspend, mode "default"
4032 bindsym h exec systemctl hibernate, mode "default"
4033 bindsym r exec systemctl reboot, mode "default"
4034 bindsym Shift+s exec systemctl poweroff -i, mode "default"
11a97c68
AB
4035
4036 # back to normal: Enter, Escape, or q
4037 bindsym Return mode "default"
4038 bindsym Escape mode "default"
4039 bindsym q mode "default"
4040}
4041bindsym XF86PowerOff mode "$mode_system"
4042
405e14e9
AB
4043#
4044# Presentation mode
4045#
4046
9455bb8f 4047bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
405e14e9 4048
ff3efe94
AB
4049#
4050# Notifications
4051#
4052
4053bindsym $mod+Shift+n mode notifications
4054mode notifications {
4055 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
4056 bindsym d exec makoctl dismiss; mode default
4057 bindsym Shift+d exec makoctl dismiss -a; mode default
4058
4059 bindsym Escape mode default
4060 bindsym q mode default
4061}
4062
4063#
4064# Screenshotting
4065#
4066
4067bindsym $mod+Shift+s mode screenshot
4068mode screenshot {
4069 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4070 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4071
4072 bindsym Escape mode default
4073 bindsym q mode default
4074}
4075
fb52d1f9
AB
4076#
4077# Status Bar:
4078#
4079# Read `man 5 sway-bar` for more information about this section.
4080bar {
d6cb3a4a 4081 position bottom
fb52d1f9
AB
4082 colors {
4083 statusline #ffffff
4084 background #323232
4085 inactive_workspace #32323200 #32323200 #5c5c5c
4086 }
9455bb8f 4087 status_command i3status | my-i3status.py
fb52d1f9
AB
4088}
4089
e32b3547 4090# font pango: benis uushi 9
ffdd4956
AB
4091# font pango: Ubuntu Mono 11
4092# font pango: Inconsolata 11
4093font pango: DejaVu Sans Mono 9
4094# font pango: Liberation Mono 9
e32b3547 4095
ff3efe94
AB
4096exec xrdb .Xresources
4097exec pgrep -x "systemd-inhibit" || \
4098 systemd-inhibit --what=handle-power-key --who=aminb \
4099 --why="Handle power button in sway" sleep infinity
4100exec mako 2>&1 >/tmp/mako.log
4101exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4102
fb52d1f9 4103include /etc/sway/config.d/*
5b09427d
AB
4104include ~/.config/sway/`hostname`
4105
ff3efe94
AB
4106exec systemd-notify --ready || true
4107
5b09427d
AB
4108#+end_src
4109
4110*** langa
4111:PROPERTIES:
4112:header-args+: :tangle ~/.config/sway/langa
4113:END:
4114
4115#+begin_src conf
4116input "2:7:SynPS/2_Synaptics_TouchPad" {
4117 events disabled
4118 dwt enabled
4119 tap enabled
4120 natural_scroll enabled
4121 click_method clickfinger
4122}
4123
4124input "1:1:AT_Translated_Set_2_keyboard" {
4125 repeat_delay 200
4126 repeat_rate 45
4127 xkb_layout us_ab,ir
4128 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4129}
fb52d1f9
AB
4130#+end_src
4131
5b09427d
AB
4132*** shemshak
4133:PROPERTIES:
4134:header-args+: :tangle ~/.config/sway/shemshak
4135:END:
4136
4137#+begin_src conf
4138input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4139 dwt enabled
4140 tap enabled
4141 natural_scroll enabled
4142 middle_emulation enabled
4143 click_method clickfinger
4144}
4145
4146input "1:1:AT_Translated_Set_2_keyboard" {
4147 repeat_delay 200
4148 repeat_rate 45
4149 xkb_layout us,ir
4150 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4151}
4152#+end_src
ad65bea0
AB
4153** swaylock
4154:PROPERTIES:
4155:header-args+: :tangle ~/.config/swaylock/config
4156:END:
4157
4158#+begin_src conf
4159image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4160scaling=fill
4161#+end_src
4162
08e87a0a
AB
4163** TLP
4164
d7144515
AB
4165*** langa
4166
4167#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4168# ------------------------------------------------------------------------------
4169# tlp - Parameters for power saving
4170# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4171
4172# Hint: some features are disabled by default, remove the leading # to enable
4173# them.
4174
4175# Set to 0 to disable, 1 to enable TLP.
4176TLP_ENABLE=1
4177
4178# Operation mode when no power supply can be detected: AC, BAT.
4179# Concerns some desktop and embedded hardware only.
4180TLP_DEFAULT_MODE=AC
4181
4182# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4183# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4184TLP_PERSISTENT_DEFAULT=0
4185
4186# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4187# Non-zero value enables, zero disables laptop mode.
4188DISK_IDLE_SECS_ON_AC=0
4189DISK_IDLE_SECS_ON_BAT=2
4190
4191# Dirty page values (timeouts in secs).
4192MAX_LOST_WORK_SECS_ON_AC=15
4193MAX_LOST_WORK_SECS_ON_BAT=60
4194
4195# Hint: CPU parameters below are disabled by default, remove the leading #
4196# to enable them, otherwise kernel default values are used.
4197
4198# Select a CPU frequency scaling governor.
4199# Intel Core i processor with intel_pstate driver:
4200# powersave(*), performance.
4201# Older hardware with acpi-cpufreq driver:
4202# ondemand(*), powersave, performance, conservative, schedutil.
4203# (*) is recommended.
4204# Hint: use tlp-stat -p to show the active driver and available governors.
4205# Important:
4206# powersave for intel_pstate and ondemand for acpi-cpufreq are power
4207# efficient for *almost all* workloads and therefore kernel and most
4208# distributions have chosen them as defaults. If you still want to change,
4209# you should know what you're doing! You *must* disable your distribution's
4210# governor settings or conflicts will occur.
4211#CPU_SCALING_GOVERNOR_ON_AC=powersave
4212#CPU_SCALING_GOVERNOR_ON_BAT=powersave
4213
4214# Set the min/max frequency available for the scaling governor.
4215# Possible values strongly depend on your CPU. For available frequencies see
4216# the output of tlp-stat -p.
4217#CPU_SCALING_MIN_FREQ_ON_AC=0
4218#CPU_SCALING_MAX_FREQ_ON_AC=0
4219#CPU_SCALING_MIN_FREQ_ON_BAT=0
4220#CPU_SCALING_MAX_FREQ_ON_BAT=0
4221
4222# Set energy performance hints (HWP) for Intel P-state governor:
4223# performance, balance_performance, default, balance_power, power
4224# Values are given in order of increasing power saving.
4225# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4226CPU_HWP_ON_AC=balance_performance
4227CPU_HWP_ON_BAT=balance_power
4228
4229# Set Intel P-state performance: 0..100 (%).
4230# Limit the max/min P-state to control the power dissipation of the CPU.
4231# Values are stated as a percentage of the available performance.
4232# Requires an Intel Core i processor with intel_pstate driver.
4233#CPU_MIN_PERF_ON_AC=0
4234#CPU_MAX_PERF_ON_AC=100
4235#CPU_MIN_PERF_ON_BAT=0
4236#CPU_MAX_PERF_ON_BAT=30
4237
4238# Set the CPU "turbo boost" feature: 0=disable, 1=allow
4239# Requires an Intel Core i processor.
4240# Important:
4241# - This may conflict with your distribution's governor settings
4242# - A value of 1 does *not* activate boosting, it just allows it
4243#CPU_BOOST_ON_AC=1
4244#CPU_BOOST_ON_BAT=0
4245
4246# Minimize number of used CPU cores/hyper-threads under light load conditions:
4247# 0=disable, 1=enable.
4248SCHED_POWERSAVE_ON_AC=0
4249SCHED_POWERSAVE_ON_BAT=1
4250
4251# Kernel NMI Watchdog:
4252# 0=disable (default, saves power), 1=enable (for kernel debugging only).
4253NMI_WATCHDOG=0
4254
4255# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4256# Frequency voltage pairs are written to:
4257# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4258# CAUTION: only use this, if you thoroughly understand what you are doing!
4259#PHC_CONTROLS="F:V F:V F:V F:V"
4260
4261# Set CPU performance versus energy savings policy:
4262# performance, balance-performance, default, balance-power, power.
4263# Values are given in order of increasing power saving.
4264# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4265ENERGY_PERF_POLICY_ON_AC=performance
4266ENERGY_PERF_POLICY_ON_BAT=balance-power
4267
4268# Disk devices; separate multiple devices with spaces (default: sda).
4269# Devices can be specified by disk ID also (lookup with: tlp diskid).
4270DISK_DEVICES="sda sdb"
4271
4272# Disk advanced power management level: 1..254, 255 (max saving, min, off).
4273# Levels 1..127 may spin down the disk; 255 allowable on most drives.
4274# Separate values for multiple disks with spaces. Use the special value 'keep'
4275# to keep the hardware default for the particular disk.
4276DISK_APM_LEVEL_ON_AC="254 254"
4277DISK_APM_LEVEL_ON_BAT="128 128"
4278
4279# Hard disk spin down timeout:
4280# 0: spin down disabled
4281# 1..240: timeouts from 5s to 20min (in units of 5s)
4282# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4283# See 'man hdparm' for details.
4284# Separate values for multiple disks with spaces. Use the special value 'keep'
4285# to keep the hardware default for the particular disk.
4286#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4287#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4288
4289# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4290# Separate values for multiple disks with spaces. Use the special value 'keep'
4291# to keep the kernel default scheduler for the particular disk.
4292#DISK_IOSCHED="cfq cfq"
4293
4294# AHCI link power management (ALPM) for disk devices:
4295# min_power, med_power_with_dipm(*), medium_power, max_performance.
4296# (*) Kernel >= 4.15 required, then recommended.
4297# Multiple values separated with spaces are tried sequentially until success.
4298SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4299SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4300
4301# Exclude host devices from AHCI link power management.
4302# Separate multiple hosts with spaces.
4303#SATA_LINKPWR_BLACKLIST="host1"
4304
4305# Runtime Power Management for AHCI host and disks devices:
4306# on=disable, auto=enable.
4307# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4308#AHCI_RUNTIME_PM_ON_AC=on
4309#AHCI_RUNTIME_PM_ON_BAT=on
4310
4311# Seconds of inactivity before disk is suspended.
4312AHCI_RUNTIME_PM_TIMEOUT=15
4313
4314# PCI Express Active State Power Management (PCIe ASPM):
4315# default, performance, powersave.
4316PCIE_ASPM_ON_AC=performance
4317PCIE_ASPM_ON_BAT=powersave
4318
4319# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4320# auto = mid on BAT, high on AC; default = use hardware defaults.
4321RADEON_POWER_PROFILE_ON_AC=high
4322RADEON_POWER_PROFILE_ON_BAT=low
4323
4324# Radeon dynamic power management method (DPM): battery, performance.
4325RADEON_DPM_STATE_ON_AC=performance
4326RADEON_DPM_STATE_ON_BAT=battery
4327
4328# Radeon DPM performance level: auto, low, high; auto is recommended.
4329RADEON_DPM_PERF_LEVEL_ON_AC=auto
4330RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4331
4332# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4333WIFI_PWR_ON_AC=off
4334WIFI_PWR_ON_BAT=on
4335
4336# Disable wake on LAN: Y/N.
4337WOL_DISABLE=Y
4338
4339# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4340# A value of 0 disables, >=1 enables power saving (recommended: 1).
4341SOUND_POWER_SAVE_ON_AC=0
4342SOUND_POWER_SAVE_ON_BAT=0
4343
4344# Disable controller too (HDA only): Y/N.
4345SOUND_POWER_SAVE_CONTROLLER=N
4346
4347# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4348# Drive can be powered on again by releasing (and reinserting) the eject lever
4349# or by pressing the disc eject button on newer models.
4350# Note: an UltraBay/MediaBay hard disk is never powered off.
4351BAY_POWEROFF_ON_AC=0
4352BAY_POWEROFF_ON_BAT=0
4353# Optical drive device to power off (default sr0).
4354BAY_DEVICE="sr0"
4355
4356# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4357RUNTIME_PM_ON_AC=on
4358RUNTIME_PM_ON_BAT=auto
4359
4360# Exclude PCI(e) device adresses the following list from Runtime PM
4361# (separate with spaces). Use lspci to get the adresses (1st column).
4362#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4363
4364# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4365# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4366# prevents accidential power-on of dGPU in hybrid graphics setups.
4367# Use "" to disable the feature completely.
4368# Separate multiple drivers with spaces.
4369#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4370
4371# Set to 0 to disable, 1 to enable USB autosuspend feature.
4372USB_AUTOSUSPEND=1
4373
4374# Exclude listed devices from USB autosuspend (separate with spaces).
4375# Use lsusb to get the ids.
4376# Note: input devices (usbhid) are excluded automatically
4377#USB_BLACKLIST="1111:2222 3333:4444"
4378
4379# Bluetooth devices are excluded from USB autosuspend:
4380# 0=do not exclude, 1=exclude.
4381USB_BLACKLIST_BTUSB=0
4382
4383# Phone devices are excluded from USB autosuspend:
4384# 0=do not exclude, 1=exclude (enable charging).
4385USB_BLACKLIST_PHONE=0
4386
4387# Printers are excluded from USB autosuspend:
4388# 0=do not exclude, 1=exclude.
4389USB_BLACKLIST_PRINTER=1
4390
4391# WWAN devices are excluded from USB autosuspend:
4392# 0=do not exclude, 1=exclude.
4393USB_BLACKLIST_WWAN=1
4394
4395# Include listed devices into USB autosuspend even if already excluded
4396# by the blacklists above (separate with spaces).
4397# Use lsusb to get the ids.
4398#USB_WHITELIST="1111:2222 3333:4444"
4399
4400# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4401# (workaround for USB devices that cause shutdown problems).
4402#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4403
4404# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4405# on system startup: 0=disable, 1=enable.
4406# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4407# are ignored when this is enabled!
4408#RESTORE_DEVICE_STATE_ON_STARTUP=0
67023528 4409RESTORE_DEVICE_STATE_ON_STARTUP=0
d7144515
AB
4410
4411# Radio devices to disable on startup: bluetooth, wifi, wwan.
4412# Separate multiple devices with spaces.
4413#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
67023528 4414DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
d7144515
AB
4415
4416# Radio devices to enable on startup: bluetooth, wifi, wwan.
4417# Separate multiple devices with spaces.
4418#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4419
4420# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4421# (workaround for devices that are blocking shutdown).
4422#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4423
4424# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4425# (to prevent other operating systems from missing radios).
4426#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4427
4428# Radio devices to enable on AC: bluetooth, wifi, wwan.
4429#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4430
4431# Radio devices to disable on battery: bluetooth, wifi, wwan.
4432#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4433
4434# Radio devices to disable on battery when not in use (not connected):
4435# bluetooth, wifi, wwan.
4436#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4437
4438# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4439# required). Charging starts when the remaining capacity falls below the
4440# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4441# Main / Internal battery (values in %)
4442#START_CHARGE_THRESH_BAT0=75
4443#STOP_CHARGE_THRESH_BAT0=80
4444# Ultrabay / Slice / Replaceable battery (values in %)
4445#START_CHARGE_THRESH_BAT1=75
4446#STOP_CHARGE_THRESH_BAT1=80
4447
4448# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4449#RESTORE_THRESHOLDS_ON_BAT=1
4450
4451# ------------------------------------------------------------------------------
4452# tlp-rdw - Parameters for the radio device wizard
4453# Possible devices: bluetooth, wifi, wwan.
4454
4455# Hints:
4456# - Parameters are disabled by default, remove the leading # to enable them
4457# - Separate multiple radio devices with spaces
4458
4459# Radio devices to disable on connect.
4460#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4461#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4462#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4463
4464# Radio devices to enable on disconnect.
4465#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4466#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4467#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4468
4469# Radio devices to enable/disable when docked.
4470#DEVICES_TO_ENABLE_ON_DOCK=""
4471#DEVICES_TO_DISABLE_ON_DOCK=""
4472
4473# Radio devices to enable/disable when undocked.
4474#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4475#DEVICES_TO_DISABLE_ON_UNDOCK=""
4476#+end_src
4477
0d78df2f 4478*** shemshak
08e87a0a 4479
0d78df2f 4480#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
08e87a0a
AB
4481# ------------------------------------------------------------------------------
4482# tlp - Parameters for power saving
4483# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4484
4485# Hint: some features are disabled by default, remove the leading # to enable
4486# them.
4487
4488# Set to 0 to disable, 1 to enable TLP.
4489TLP_ENABLE=1
4490
4491# Operation mode when no power supply can be detected: AC, BAT.
4492# Concerns some desktop and embedded hardware only.
4493TLP_DEFAULT_MODE=AC
4494
4495# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4496# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4497TLP_PERSISTENT_DEFAULT=0
4498
4499# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4500# Non-zero value enables, zero disables laptop mode.
4501DISK_IDLE_SECS_ON_AC=0
4502DISK_IDLE_SECS_ON_BAT=2
4503
4504# Dirty page values (timeouts in secs).
4505MAX_LOST_WORK_SECS_ON_AC=15
4506MAX_LOST_WORK_SECS_ON_BAT=60
4507
4508# Hint: CPU parameters below are disabled by default, remove the leading #
4509# to enable them, otherwise kernel default values are used.
4510
4511# Select a CPU frequency scaling governor.
4512# Intel Core i processor with intel_pstate driver:
4513# powersave(*), performance.
4514# Older hardware with acpi-cpufreq driver:
4515# ondemand(*), powersave, performance, conservative, schedutil.
4516# (*) is recommended.
4517# Hint: use tlp-stat -p to show the active driver and available governors.
4518# Important:
4519# powersave for intel_pstate and ondemand for acpi-cpufreq are power
4520# efficient for *almost all* workloads and therefore kernel and most
4521# distributions have chosen them as defaults. If you still want to change,
4522# you should know what you're doing! You *must* disable your distribution's
4523# governor settings or conflicts will occur.
4524#CPU_SCALING_GOVERNOR_ON_AC=powersave
4525#CPU_SCALING_GOVERNOR_ON_BAT=powersave
4526
4527# Set the min/max frequency available for the scaling governor.
4528# Possible values strongly depend on your CPU. For available frequencies see
4529# the output of tlp-stat -p.
4530#CPU_SCALING_MIN_FREQ_ON_AC=0
4531#CPU_SCALING_MAX_FREQ_ON_AC=0
4532#CPU_SCALING_MIN_FREQ_ON_BAT=0
4533#CPU_SCALING_MAX_FREQ_ON_BAT=0
4534
4535# Set energy performance hints (HWP) for Intel P-state governor:
4536# performance, balance_performance, default, balance_power, power
4537# Values are given in order of increasing power saving.
4538# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4539CPU_HWP_ON_AC=balance_performance
4540CPU_HWP_ON_BAT=balance_power
4541
4542# Set Intel P-state performance: 0..100 (%).
4543# Limit the max/min P-state to control the power dissipation of the CPU.
4544# Values are stated as a percentage of the available performance.
4545# Requires an Intel Core i processor with intel_pstate driver.
4546#CPU_MIN_PERF_ON_AC=0
4547#CPU_MAX_PERF_ON_AC=100
4548#CPU_MIN_PERF_ON_BAT=0
4549#CPU_MAX_PERF_ON_BAT=30
4550
4551# Set the CPU "turbo boost" feature: 0=disable, 1=allow
4552# Requires an Intel Core i processor.
4553# Important:
4554# - This may conflict with your distribution's governor settings
4555# - A value of 1 does *not* activate boosting, it just allows it
4556#CPU_BOOST_ON_AC=1
4557#CPU_BOOST_ON_BAT=0
4558
4559# Minimize number of used CPU cores/hyper-threads under light load conditions:
4560# 0=disable, 1=enable.
4561SCHED_POWERSAVE_ON_AC=0
4562SCHED_POWERSAVE_ON_BAT=1
4563
4564# Kernel NMI Watchdog:
4565# 0=disable (default, saves power), 1=enable (for kernel debugging only).
4566NMI_WATCHDOG=0
4567
4568# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4569# Frequency voltage pairs are written to:
4570# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4571# CAUTION: only use this, if you thoroughly understand what you are doing!
4572#PHC_CONTROLS="F:V F:V F:V F:V"
4573
4574# Set CPU performance versus energy savings policy:
4575# performance, balance-performance, default, balance-power, power.
4576# Values are given in order of increasing power saving.
4577# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4578ENERGY_PERF_POLICY_ON_AC=performance
4579ENERGY_PERF_POLICY_ON_BAT=balance-power
4580
4581# Disk devices; separate multiple devices with spaces (default: sda).
4582# Devices can be specified by disk ID also (lookup with: tlp diskid).
4583DISK_DEVICES="sda sdb"
4584
4585# Disk advanced power management level: 1..254, 255 (max saving, min, off).
4586# Levels 1..127 may spin down the disk; 255 allowable on most drives.
4587# Separate values for multiple disks with spaces. Use the special value 'keep'
4588# to keep the hardware default for the particular disk.
4589DISK_APM_LEVEL_ON_AC="254 254"
4590DISK_APM_LEVEL_ON_BAT="128 128"
4591
4592# Hard disk spin down timeout:
4593# 0: spin down disabled
4594# 1..240: timeouts from 5s to 20min (in units of 5s)
4595# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4596# See 'man hdparm' for details.
4597# Separate values for multiple disks with spaces. Use the special value 'keep'
4598# to keep the hardware default for the particular disk.
4599#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4600#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4601
4602# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4603# Separate values for multiple disks with spaces. Use the special value 'keep'
4604# to keep the kernel default scheduler for the particular disk.
4605#DISK_IOSCHED="cfq cfq"
4606
4607# AHCI link power management (ALPM) for disk devices:
4608# min_power, med_power_with_dipm(*), medium_power, max_performance.
4609# (*) Kernel >= 4.15 required, then recommended.
4610# Multiple values separated with spaces are tried sequentially until success.
4611SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4612SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4613
4614# Exclude host devices from AHCI link power management.
4615# Separate multiple hosts with spaces.
4616#SATA_LINKPWR_BLACKLIST="host1"
4617
4618# Runtime Power Management for AHCI host and disks devices:
4619# on=disable, auto=enable.
4620# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4621#AHCI_RUNTIME_PM_ON_AC=on
4622#AHCI_RUNTIME_PM_ON_BAT=on
4623
4624# Seconds of inactivity before disk is suspended.
4625AHCI_RUNTIME_PM_TIMEOUT=15
4626
4627# PCI Express Active State Power Management (PCIe ASPM):
4628# default, performance, powersave.
4629PCIE_ASPM_ON_AC=performance
4630PCIE_ASPM_ON_BAT=powersave
4631
4632# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4633# auto = mid on BAT, high on AC; default = use hardware defaults.
4634RADEON_POWER_PROFILE_ON_AC=high
4635RADEON_POWER_PROFILE_ON_BAT=low
4636
4637# Radeon dynamic power management method (DPM): battery, performance.
4638RADEON_DPM_STATE_ON_AC=performance
4639RADEON_DPM_STATE_ON_BAT=battery
4640
4641# Radeon DPM performance level: auto, low, high; auto is recommended.
4642RADEON_DPM_PERF_LEVEL_ON_AC=auto
4643RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4644
4645# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4646WIFI_PWR_ON_AC=off
4647WIFI_PWR_ON_BAT=on
4648
4649# Disable wake on LAN: Y/N.
4650WOL_DISABLE=Y
4651
4652# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4653# A value of 0 disables, >=1 enables power saving (recommended: 1).
4654SOUND_POWER_SAVE_ON_AC=0
4655SOUND_POWER_SAVE_ON_BAT=0
4656
4657# Disable controller too (HDA only): Y/N.
4658SOUND_POWER_SAVE_CONTROLLER=N
4659
4660# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4661# Drive can be powered on again by releasing (and reinserting) the eject lever
4662# or by pressing the disc eject button on newer models.
4663# Note: an UltraBay/MediaBay hard disk is never powered off.
4664BAY_POWEROFF_ON_AC=0
4665BAY_POWEROFF_ON_BAT=0
4666# Optical drive device to power off (default sr0).
4667BAY_DEVICE="sr0"
4668
4669# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4670RUNTIME_PM_ON_AC=on
4671RUNTIME_PM_ON_BAT=auto
4672
4673# Exclude PCI(e) device adresses the following list from Runtime PM
4674# (separate with spaces). Use lspci to get the adresses (1st column).
4675#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4676RUNTIME_PM_BLACKLIST="01:00.0"
4677
4678# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4679# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4680# prevents accidential power-on of dGPU in hybrid graphics setups.
4681# Use "" to disable the feature completely.
4682# Separate multiple drivers with spaces.
4683#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4684
4685# Set to 0 to disable, 1 to enable USB autosuspend feature.
4686USB_AUTOSUSPEND=1
4687
4688# Exclude listed devices from USB autosuspend (separate with spaces).
4689# Use lsusb to get the ids.
4690# Note: input devices (usbhid) are excluded automatically
4691#USB_BLACKLIST="1111:2222 3333:4444"
4692
4693# Bluetooth devices are excluded from USB autosuspend:
4694# 0=do not exclude, 1=exclude.
4695USB_BLACKLIST_BTUSB=0
4696
4697# Phone devices are excluded from USB autosuspend:
4698# 0=do not exclude, 1=exclude (enable charging).
4699USB_BLACKLIST_PHONE=0
4700
4701# Printers are excluded from USB autosuspend:
4702# 0=do not exclude, 1=exclude.
4703USB_BLACKLIST_PRINTER=1
4704
4705# WWAN devices are excluded from USB autosuspend:
4706# 0=do not exclude, 1=exclude.
4707USB_BLACKLIST_WWAN=1
4708
4709# Include listed devices into USB autosuspend even if already excluded
4710# by the blacklists above (separate with spaces).
4711# Use lsusb to get the ids.
4712#USB_WHITELIST="1111:2222 3333:4444"
4713
4714# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4715# (workaround for USB devices that cause shutdown problems).
4716#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4717
4718# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4719# on system startup: 0=disable, 1=enable.
4720# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4721# are ignored when this is enabled!
4722#RESTORE_DEVICE_STATE_ON_STARTUP=0
4723RESTORE_DEVICE_STATE_ON_STARTUP=1
4724
4725# Radio devices to disable on startup: bluetooth, wifi, wwan.
4726# Separate multiple devices with spaces.
4727#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4728
4729# Radio devices to enable on startup: bluetooth, wifi, wwan.
4730# Separate multiple devices with spaces.
4731#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4732
4733# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4734# (workaround for devices that are blocking shutdown).
4735#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4736
4737# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4738# (to prevent other operating systems from missing radios).
4739#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4740
4741# Radio devices to enable on AC: bluetooth, wifi, wwan.
4742#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4743
4744# Radio devices to disable on battery: bluetooth, wifi, wwan.
4745#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4746
4747# Radio devices to disable on battery when not in use (not connected):
4748# bluetooth, wifi, wwan.
4749#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4750
4751# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4752# required). Charging starts when the remaining capacity falls below the
4753# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4754# Main / Internal battery (values in %)
4755#START_CHARGE_THRESH_BAT0=75
4756#STOP_CHARGE_THRESH_BAT0=80
4757# Ultrabay / Slice / Replaceable battery (values in %)
4758#START_CHARGE_THRESH_BAT1=75
4759#STOP_CHARGE_THRESH_BAT1=80
4760
4761# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4762#RESTORE_THRESHOLDS_ON_BAT=1
4763
4764# ------------------------------------------------------------------------------
4765# tlp-rdw - Parameters for the radio device wizard
4766# Possible devices: bluetooth, wifi, wwan.
4767
4768# Hints:
4769# - Parameters are disabled by default, remove the leading # to enable them
4770# - Separate multiple radio devices with spaces
4771
4772# Radio devices to disable on connect.
4773#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4774#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4775#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4776
4777# Radio devices to enable on disconnect.
4778#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4779#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4780#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4781
4782# Radio devices to enable/disable when docked.
4783#DEVICES_TO_ENABLE_ON_DOCK=""
4784#DEVICES_TO_DISABLE_ON_DOCK=""
4785
4786# Radio devices to enable/disable when undocked.
4787#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4788#DEVICES_TO_DISABLE_ON_UNDOCK=""
4789#+end_src
4790
2e877d14
AB
4791** X
4792
4793*** xprofile
4794:PROPERTIES:
4795:header-args+: :tangle ~/.xprofile
4796:END:
4797
4798=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4799contrary, it's automatically sourced by LightDM, my display manager of
4800choice.
4801
fb52d1f9 4802#+begin_src sh :tangle no
6bab6a4a 4803xset -b # disable bell
b5208764 4804xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
6bab6a4a 4805
2e877d14
AB
4806# setxkbmap -option compose:ralt
4807
4808setxkbmap -option ctrl:nocaps # turn capslock into control
4809setxkbmap -option altwin:swap_alt_win # swap alt and super
4810
4811if [ $(hostname) = "plasma" ]
4812then
4813 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4814fi
4815
4816if [ $(hostname) = "enigma" ]
4817then
4818 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4819fi
4820
4821light -Scrs "intel_backlight" 2
4822
4823source $HOME/.zprofile
4824
4825export _JAVA_AWT_WM_NONREPARENTING=1
4826export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4827
2e877d14
AB
4828if [ $(hostname) = "plasma" ]
4829then
c0132386 4830 unlock-def-gk.py &
2e877d14 4831fi
c0132386
AB
4832
4833bspwm &
2e877d14
AB
4834#+end_src
4835
4836*** X resources
4837
4838**** Xresources
4839:PROPERTIES:
4840:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4841:END:
4842
4843#+begin_src conf-xdefaults
4844#include ".Xresources.d/fonts"
4845! #include ".Xresources.d/colors"
4846#include ".Xresources.d/emacs"
4847#include ".Xresources.d/rxvt-unicode"
4848#+end_src
4849
4850**** Xresources.d
4851
4852***** fonts
4853:PROPERTIES:
4854:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4855:END:
4856
4857#+begin_src conf-xdefaults
4858Xft.lcdfilter: lcddefault
4859Xft.antialias: true
4860Xft.autohint: 0
4861Xft.hinting: true
4862Xft.hintstyle: hintslight
4863! Xft.hintstyle: hintfull
4864Xft.rgba: rgb
4865Xft.dpi: 96
4866#+end_src
4867
4868***** colors
4869:PROPERTIES:
4870:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4871:END:
4872
4873#+begin_src conf-xdefaults :tangle no
4874#include "gruvbox-light.xresources"
4875! #include "gruvbox-dark.xresources"
4876#include "gruvbox-urxvt256.xresources"
4877#+end_src
4878
4879#+begin_src conf-xdefaults :tangle no
4880! -----------------------------------------------------------------------------
4881! File: gruvbox-light.xresources
4882! Description: Retro groove colorscheme generalized
4883! Author: morhetz <morhetz@gmail.com>
4884! Source: https://github.com/morhetz/gruvbox-generalized
4885! Last Modified: 6 Sep 2014
4886! -----------------------------------------------------------------------------
4887
4888! hard contrast: *background: #f9f5d7
4889*background: #fbf1c7
4890! soft contrast: *background: #f2e5bc
4891*foreground: #3c3836
4892! Black + DarkGrey
4893*color0: #fdf4c1
4894*color8: #928374
4895! DarkRed + Red
4896*color1: #cc241d
4897*color9: #9d0006
4898! DarkGreen + Green
4899*color2: #98971a
4900*color10: #79740e
4901! DarkYellow + Yellow
4902*color3: #d79921
4903*color11: #b57614
4904! DarkBlue + Blue
4905*color4: #458588
4906*color12: #076678
4907! DarkMagenta + Magenta
4908*color5: #b16286
4909*color13: #8f3f71
4910! DarkCyan + Cyan
4911*color6: #689d6a
4912*color14: #427b58
4913! LightGrey + White
4914*color7: #7c6f64
4915*color15: #3c3836
4916#+end_src
4917
4918#+begin_src conf-xdefaults :tangle no
4919! -----------------------------------------------------------------------------
4920! File: gruvbox-dark.xresources
4921! Description: Retro groove colorscheme generalized
4922! Author: morhetz <morhetz@gmail.com>
4923! Source: https://github.com/morhetz/gruvbox-generalized
4924! Last Modified: 6 Sep 2014
4925! -----------------------------------------------------------------------------
4926
4927! hard contrast: *background: #1d2021
4928*background: #282828
4929! soft contrast: *background: #32302f
4930*foreground: #ebdbb2
4931! Black + DarkGrey
4932*color0: #282828
4933*color8: #928374
4934! DarkRed + Red
4935*color1: #cc241d
4936*color9: #fb4934
4937! DarkGreen + Green
4938*color2: #98971a
4939*color10: #b8bb26
4940! DarkYellow + Yellow
4941*color3: #d79921
4942*color11: #fabd2f
4943! DarkBlue + Blue
4944*color4: #458588
4945*color12: #83a598
4946! DarkMagenta + Magenta
4947*color5: #b16286
4948*color13: #d3869b
4949! DarkCyan + Cyan
4950*color6: #689d6a
4951*color14: #8ec07c
4952! LightGrey + White
4953*color7: #a89984
4954*color15: #ebdbb2
4955#+end_src
4956
4957#+begin_src conf-xdefaults :tangle no
4958! -----------------------------------------------------------------------------
4959! File: gruvbox-urxvt256.xresources
4960! Description: Retro groove colorscheme generalized
4961! Author: morhetz <morhetz@gmail.com>
4962! Source: https://github.com/morhetz/gruvbox-generalized
4963! Last Modified: 13 Dec 2013
4964! -----------------------------------------------------------------------------
4965
4966URxvt.color24: #076678
4967URxvt.color66: #427b58
4968URxvt.color88: #9d0006
4969URxvt.color96: #8f3f71
4970URxvt.color100: #79740e
4971URxvt.color108: #8ec07c
4972URxvt.color109: #83a598
4973URxvt.color130: #af3a03
4974URxvt.color136: #b57614
4975URxvt.color142: #b8bb26
4976URxvt.color167: #fb4934
4977URxvt.color175: #d3869b
4978URxvt.color208: #fe8019
4979URxvt.color214: #fabd2f
4980URxvt.color223: #ebdbb2
4981URxvt.color228: #f2e5bc
4982URxvt.color229: #fbf1c7
4983URxvt.color230: #f9f5d7
4984URxvt.color234: #1d2021
4985URxvt.color235: #282828
4986URxvt.color236: #32302f
4987URxvt.color237: #3c3836
4988URxvt.color239: #504945
4989URxvt.color241: #665c54
4990URxvt.color243: #7c6f64
4991URxvt.color244: #928374
4992URxvt.color245: #928374
4993URxvt.color246: #a89984
4994URxvt.color248: #bdae93
4995URxvt.color250: #d5c4a1
4996#+end_src
4997
4998***** emacs
4999:PROPERTIES:
5000:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
5001:END:
5002
5003#+begin_src conf-xdefaults
5004Emacs.menuBar: off
5005Emacs.toolBar: off
5006Emacs.verticalScrollBars: off
5007Emacs.cursorBlink: off
5008Emacs.FontBackend: xft,x
5009! Emacs.font: Ubuntu Mono-12
5010! Emacs.font: Triplicate T4C-11
5011! Emacs.font: Ubuntu Mono-10.5
5012! Emacs.font: Ubuntu Mono-12
5013! Emacs.font: Iosevka-11
5014
5015! Emacs.font: Fira Mono:size=15
5016! Emacs.font: DejaVu Sans Mono:size=15
5017! Emacs.font: Inconsolata:size=17
5018! Emacs.font: Inconsolata:size=16
5019! Emacs.font: Inconsolata LGC:size=14
5020! Emacs.font: Source Code Pro Medium-10.5
1f2bc66e
AB
5021Emacs.font: Source Code Pro:size=14
5022! Emacs.font: Ubuntu Mono:size=16
2e877d14
AB
5023! Emacs.font: Iosevka:size=16
5024#+end_src
5025
5026***** rxvt-unicode
5027:PROPERTIES:
5028:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
5029:END:
5030
5031#+begin_src conf-xdefaults
5032! Font
1f2bc66e
AB
5033URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
5034URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
5035URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
5036URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
2e877d14
AB
5037
5038URxvt.xftAntialias: true
5039URxvt.letterSpace: 0
5040
5041URxvt.depth: 0
5042URxvt.loginShell: true
5043URxvt.saveLines: 100000
5044URxvt.internalBorder: 3
5045URxvt.lineSpace: 0
5046URxvt.scrollBar: false
5047URxvt.scrollStyle: rxvt
5048URxvt*scrollTtyOutput: false
5049URxvt*scrollWithBuffer: true
5050URxvt*scrollTtyKeypress: true
5051URxvt.keysym.Shift-Up: command:\033]720;1\007
5052URxvt.keysym.Shift-Down: command:\033]721;1\007
5053
5054URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
2e877d14
AB
5055URxvt.url-select.launcher: firefox
5056URxvt.url-select.underline: true
5057URxvt.keysym.M-u: perl:url-select:select_next
5058URxvt.keysym.M-Escape: perl:keyboard-select:activate
5059URxvt.keysym.M-s: perl:keyboard-select:search
5060URxvt.url-launcher: /usr/bin/firefox
5061URxvt.matcher.button: 1
5062URxvt.iso14755: false
5063URxvt.iso14755_53: false
5064URxvt.keysym.M-c: perl:clipboard:copy
5065URxvt.keysym.M-v: perl:clipboard:paste
5066URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
5067URxvt.keysym.C-Up: font-size:increase
5068URxvt.keysym.C-Down: font-size:decrease
5069URxvt.keysym.C-S-Up: font-size:incglobal
5070URxvt.keysym.C-S-Down: font-size:decglobal
5071URxvt.keysym.C-equal: font-size:reset
5072!URxvt.keysym.C-question: font-size:show
5073
5074URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5075
5076!urxvt*foreground: white
5077!urxvt*background: black
5078
5079!*color0: #2E3436
5080!*color1: #a40000
5081!*color2: #4E9A06
5082!*color3: #C4A000
5083!*color4: #3465A4
5084!*color5: #75507B
5085!*color6: #ce5c00
5086!*color7: #babdb9
5087!*color8: #555753
5088!*color9: #EF2929
5089!*color10: #8AE234
5090!*color11: #FCE94F
5091!*color12: #729FCF
5092!*color13: #AD7FA8
5093!*color14: #fcaf3e
5094!*color15: #EEEEEC
5095
5096!URxvt.foreground: #C8C8C8
5097!URxvt.background: #FFFFFF
5098
5099!! black
5100!*color0: #2E3436
5101!*color8: #555753
5102!! red
5103!*color1: #a40000
5104!*color9: #EF2929
5105!! green
5106!*color2: #4E9A06
5107!*color10: #8AE234
5108!! yellow
5109!*color3: #C4A000
5110!*color11: #FCE94F
5111!! blue
5112!*color4: #3465A4
5113!*color12: #729FCF
5114!! purple
5115!*color5: #75507B
5116!*color13: #AD7FA8
5117!! orange (replaces cyan)
5118!*color6: #ce5c00
5119!*color14: #fcaf3e
5120!! white
5121!*color7: #babdb9
5122!*color15: #EEEEEC
5123
5124! Tango colour theme for rxvt-unicode
5125URxvt.background: #FFFFFF
5126URxvt.foreground: #000000
5127
5128! Black
5129URxvt.color0: #2E3436
5130URxvt.color8: #757773
5131
5132! Red
5133URxvt.color1: #CC0000
5134URxvt.color9: #EF2929
5135
5136! Green
5137URxvt.color2: #4E9A06
5138URxvt.color10: #8AE234
5139
5140! Yellow
5141URxvt.color3: #C4A000
5142URxvt.color11: #FCE94F
5143
5144! Blue
5145URxvt.color4: #3465A4
5146URxvt.color12: #729FCF
5147
5148! Magenta
5149URxvt.color5: #75507B
5150URxvt.color13: #AD7FA8
5151
5152!! Cyan
5153!URxvt.color6: #06989A
5154!URxvt.color14: #34E2E2
5155! orange (replaces cyan)
1f2bc66e
AB
5156,*color6: #ce5c00
5157,*color14: #fcaf3e
2e877d14
AB
5158
5159! White
5160URxvt.color7: #D3D7CF
5161URxvt.color15: #EEEEEC
5162#+end_src
5163
d716e61e
AB
5164*** xkb us_ab keyboard layout
5165
5166#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5167default partial alphanumeric_keys
5168xkb_symbols "us_ab" {
5169 include "us(basic)"
5170 name[Group1]= "English (US)(aminb)";
5171
5172 key <MENU> { [ Alt_R ] };
5173};
5174#+end_src
5175
69a6fe26
AB
5176** XDG
5177:PROPERTIES:
5178:header-args+: :tangle ~/.config/user-dirs.dirs
5179:END:
5180
5181#+begin_src conf
5182XDG_DESKTOP_DIR="$HOME/Desktop"
5183XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5184XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5185XDG_MUSIC_DIR="$HOME/usr/music"
5186XDG_PICTURES_DIR="$HOME/usr/pics"
5187XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5188XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5189XDG_VIDEOS_DIR="$HOME/usr/vids"
5190#+end_src
5191
5192** Zathura
5193:PROPERTIES:
5194:header-args+: :tangle ~/.config/zathura/zathurarc
5195:END:
5196
5197#+begin_src conf
5198set smooth-scroll true
5199set selection-clipboard clipboard
5200set zoom-step 05
5201set default-bg "#272727"
5202set statusbar-bg "#272727"
5203set inputbar-bg "#373737"
5204#+end_src
5205
b1f6f894
AB
5206** Zsh
5207
5208My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5209[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5210installed.
5211
5212*** zimrc
5213:PROPERTIES:
5214:header-args+: :tangle ~/.zimrc
5215:END:
5216
5217#+begin_src sh
5218
5219
5220#################
5221# CORE SETTINGS #
5222#################
5223
5224#
5225# Zim settings
5226#
5227
5228# Select what modules you would like enabled.
5229# The second line of modules may depend on options set by modules in the first
5230# line. These dependencies are noted on the respective module's README.md.
5231zmodules=(directory environment git git-info history input ssh utility custom \
5232 syntax-highlighting history-substring-search prompt completion)
5233
5234
5235###################
5236# MODULE SETTINGS #
5237###################
5238
5239#
5240# Prompt
5241#
5242
5243# Set your desired prompt here
5244zprompt_theme='pure'
5245#PURE_PROMPT_SYMBOL=λ
5246#PURE_PROMPT_SYMBOL=δ
5247PURE_PROMPT_SYMBOL=➜
5248
5249#
5250# Completion
5251#
5252
5253# set an optional host-specific filename for the completion cache file
5254# if none is provided, the default '.zcompdump' is used.
5255#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5256
5257#
5258# Utility
5259#
5260
5261# Uncomment to enable command correction prompts
5262# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5263setopt CORRECT
5264
5265#
5266# Environment
5267#
5268
5269# Set the string below to the desired terminal title format string.
5270# The terminal title is redrawn upon directory change, however, variables like
5271# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5272# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5273# The example below uses the following format: 'username@host:/current/directory'
5274ztermtitle='%n@%m:%~'
5275
5276#
5277# Input
5278#
5279
5280# Uncomment to enable double-dot expansion.
5281# This appends '../' to your input for each '.' you type after an initial '..'
5282#zdouble_dot_expand='true'
5283
5284#
5285# Syntax-Highlighting
5286#
5287
5288# This determines what highlighters will be used with the syntax-highlighting module.
5289# Documentation of the highlighters can be found here:
5290# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5291# For (u)rxvt, termite and gnome-terminal users,
5292# removing the 'cursor' highlighter will fix the disappearing cursor problem
5293#zhighlighters=(main brackets cursor)
5294zhighlighters=(main brackets pattern)
5295
5296
5297#
5298# SSH
5299#
5300
5301# Load these ssh identities with the ssh module
05675ca4 5302zssh_ids=(id_ed25519_bandali)
b1f6f894
AB
5303
5304
5305#
5306# Pacman
5307#
5308
5309# Set (optional) pacman front-end.
5310zpacman_frontend='yay'
5311
5312# Load any helper scripts as defined here
5313#zpacman_helper=(aur)
5314#+end_src
5315
5316*** zlogin
5317:PROPERTIES:
5318:header-args+: :tangle ~/.zlogin
5319:END:
5320
5321#+begin_src sh
5322
5323
5324#
5325# User configuration sourced by login shells
5326#
5327
5328# Initialize zim
5329[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5330#+end_src
5331
5332*** zprofile
5333:PROPERTIES:
5334:header-args+: :tangle ~/.zprofile
5335:END:
5336
5337#+begin_src sh
5338#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5339#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
50fff474 5340export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
b1f6f894
AB
5341export XDG_CONFIG_HOME=$HOME/.config
5342export XDG_DATA_HOME=$HOME/.local/share
5343export XDG_DATA_DIRS=/usr/local/share:/usr/share
5344export MAILDIR="$HOME/mail"
5345export CVS_RSH=ssh
5346#export MATHMODELS=$HOME/src/eiffel/mathmodels
5347#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5348#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5349
5350# Eiffel2Java stuff
5351#export JAVA_HOME=/usr/lib/jvm/default
5352#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5353#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5354#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5355
5356#export PATH="$HOME/usr/build/pvs:$PATH"
5357#export SBCLISP_HOME=/usr/share/sbcl-source
5358#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5359
5360export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
5361
5362#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5363#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5364
81f3a324
AB
5365export NIXPKGS=$HOME/src/git/nixpkgs
5366
88bb4858 5367if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
b1f6f894
AB
5368#+end_src
5369
5370*** zshenv
5371:PROPERTIES:
5372:header-args+: :tangle ~/.zshenv
5373:END:
5374
5375#+begin_src sh
5376# Ensure that a non-login, non-interactive shell has a defined environment.
5377if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5378 source "${ZDOTDIR:-$HOME}/.zprofile"
5379fi
5380#+end_src
5381
5382*** zshrc
5383:PROPERTIES:
5384:header-args+: :tangle ~/.zshrc
5385:END:
5386
5387#+begin_src sh
5388# Bash-like navigation
5389#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5390#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5391export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5392#ZLE_SPACE_SUFFIX_CHARS=$'|&'
5393
5394#disable -r time # disable shell reserved word
5395#alias time='time -p' # -p for POSIX output
5396
5397# rehash if last command was pacaur or pacman
5398# (so that zsh picks up changes in $PATH immediately)
5399TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5400
5401#
5402# User configuration sourced by interactive shells
5403#
5404
5405# Change default zim location
5406export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5407
5408# Start zim
5409[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5410
5411ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5412#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5413
5414setopt globdots
5415
5416source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
2a6e947b 5417# source ~/.zsh/zsh-autopair/autopair.zsh
b1f6f894
AB
5418
5419
5420### fzf ###
5421
5422source /usr/share/fzf/key-bindings.zsh
5423source /usr/share/fzf/completion.zsh
5424
5425# Accept history selection instead of putting it on
5426# the command line
5427fzf-history-widget-accept() {
5428 fzf-history-widget
5429 zle accept-line
5430}
5431#zle -N fzf-history-widget-accept
5432#bindkey '^R' fzf-history-widget-accept
5433
5434# alt+c preview
5435export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5436
5437### fzf ###
5438
5439
5440# aliases
5441alias mpv="mpv --ytdl-format mp4"
5442alias mv="mv -iv"
5443alias cp="cp -iv"
5444alias scl=systemctl
5445alias jcl=journalctl
6b6a22a2 5446alias m="mbsync -a"
b1f6f894 5447alias best="youtube-dl -f best"
037935ed
AB
5448alias sd="ssh deb"
5449alias sf="ssh fp"
5450alias sn="ssh nix"
b1f6f894
AB
5451
5452aur() {
5453 cd ~/usr/build
5454 git clone https://aur.archlinux.org/${1}.git
5455 cd ${1}
5456}
5457
5458# i-beam cursor
5459echo -e "\033[5 q"
5460#echo -e "\033[6 q"
5461#+end_src
5462
b13e2dc1
AB
5463* Scripts
5464
5465This section contains various useful scripts and the ones used by the
5466programs above. For instance, =toggle-tablet= for switching to and
5467from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5468Xfce's presentation mode which keeps the screen awake, and
5469=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5470exact brightness value.
5471
683f2865
AB
5472** battery-percentage-time
5473:PROPERTIES:
7564bd4d 5474:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
683f2865
AB
5475:END:
5476
6a056822 5477#+begin_src sh :tangle no
7564bd4d
AB
5478dbus_send() {
5479 label=$1
5480 dbus-send --print-reply=literal --system \
5481 --dest=org.freedesktop.UPower \
5482 /org/freedesktop/UPower/devices/battery_BAT0 \
5483 org.freedesktop.DBus.Properties.Get \
5484 string:org.freedesktop.UPower.Device \
5485 string:"${label}" | awk '{print $3}'
5486}
5487
5488perc=$(dbus_send 'Percentage')
5489state=$(dbus_send 'State')
be33ab1f
AB
5490
5491if [ "$state" -eq 2 ]; then # Discharging
7564bd4d 5492 secs=$(dbus_send 'TimeToEmpty')
be33ab1f 5493elif [ "$state" -eq 1 ]; then # Charging
7564bd4d 5494 secs=$(dbus_send 'TimeToFull')
be33ab1f 5495fi
7564bd4d 5496
ce79d14b 5497printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
683f2865
AB
5498#+end_src
5499
9455bb8f
AB
5500** my-i3status.py
5501:PROPERTIES:
5502:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
5503:END:
5504
5505#+begin_src python :comments none
5506# -*- coding: utf-8 -*-
5507
5508# This script is a simple wrapper which prefixes each i3status line with custom
5509# information. It is based on:
5510# https://github.com/i3/i3status/blob/master/contrib/wrapper.py
5511#
5512# In ~/.i3status.conf, add the following line:
5513# output_format = "i3bar"
5514# in the 'general' section.
5515# Then, in ~/.config/i3/config or ~/.config/sway/config add:
5516# status_command i3status | my-i3status.py
5517# in the 'bar' section. Make sure my-i3status.py is in $PATH.
5518#
5519# © 2012 Valentin Haenel <valentin.haenel@gmx.de>
5520# © 2018 Amin Bandali <bandali@gnu.org>
5521#
5522# This program is free software. It comes without any warranty, to the extent
5523# permitted by applicable law. You can redistribute it and/or modify it under
5524# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
5525# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
5526# details.
5527
5528import sys
5529import json
5530import os
5531
5532def get_nosleep():
5533 """ Return true if ~/.nosleep exists. """
5534 return os.path.isfile(os.path.expanduser("~/.nosleep"))
5535
5536def print_line(message):
5537 """ Non-buffered printing to stdout. """
5538 sys.stdout.write(message + '\n')
5539 sys.stdout.flush()
5540
5541def read_line():
5542 """ Interrupted respecting reader for stdin. """
5543 # try reading a line, removing any extra whitespace
5544 try:
5545 line = sys.stdin.readline().strip()
5546 # i3status sends EOF, or an empty line
5547 if not line:
5548 sys.exit(3)
5549 return line
5550 # exit on ctrl-c
5551 except KeyboardInterrupt:
5552 sys.exit()
5553
5554if __name__ == '__main__':
5555 # Skip the first line which contains the version header.
5556 print_line(read_line())
5557
5558 # The second line contains the start of the infinite array.
5559 print_line(read_line())
5560
5561 while True:
5562 line, prefix = read_line(), ''
5563 # ignore comma at start of lines
5564 if line.startswith(','):
5565 line, prefix = line[1:], ','
5566
5567 if get_nosleep():
5568 j = json.loads(line)
5569 # insert information into the start of the json, but could be anywhere
5570 j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
5571 # and echo back new encoded json
5572 print_line(prefix+json.dumps(j))
5573 else:
5574 print_line(prefix+line)
5575#+end_src
5576
b13e2dc1
AB
5577** rofi-light
5578:PROPERTIES:
5579:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5580:END:
5581
33c5a5cd 5582#+begin_src bash
b13e2dc1 5583cur=$(light -G)
c2ce9b12 5584val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
b13e2dc1
AB
5585light -S $val
5586#+end_src
5587
ec002050
AB
5588** s (run sway)
5589:PROPERTIES:
5590:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5591:END:
5592
5593#+begin_src bash
ec002050
AB
5594export _JAVA_AWT_WM_NONREPARENTING=1
5595export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
c19f32f3 5596light -Nr 2
ec002050
AB
5597source $HOME/.zprofile
5598sway
5599#+end_src
5600
bfe0aa23
AB
5601** sway-ws-util
5602:PROPERTIES:
5603:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5604:END:
5605
5606#+begin_src bash
5607curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
e549b7c8
AB
5608[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5609[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
bfe0aa23
AB
5610dest_ws=-1
5611op=-1
5612
5613if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5614 op="$1"
5615 if [ "$2" = "prev" ]; then
5616 dest_ws="$prev_ws"
5617 elif [ "$2" = "next" ]; then
5618 dest_ws="$next_ws"
5619 else
c60842dd 5620 echo "Usage: $0 $1 {prev|next} [follow]"
bfe0aa23
AB
5621 exit 1
5622 fi
5623else
5624 echo "Usage: $0 {switch|move} {prev|next} [follow]"
5625 exit 1
5626fi
5627
5628if [ "$op" = "switch" ]; then
5629 sway workspace "$dest_ws"
5630elif [ "$op" = "move" ]; then
5631 sway move container to workspace "$dest_ws"
5632 if [ "$3" = "follow" ]; then
5633 sway workspace "$dest_ws"
5634 fi
5635fi
5636#+end_src
5637
b13e2dc1
AB
5638** toggle-layout
5639:PROPERTIES:
5640:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5641:END:
5642
e388ae6f 5643#+begin_src bash :tangle no
b13e2dc1
AB
5644lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5645
5646if [ "$lang" = "us" ]; then
5647 setxkbmap ir
5648else
5649 setxkbmap us
5650 # xmodmap $HOME/.Xmodmap
5651fi
5652#+end_src
5653
5654** toggle-presentation-mode
5655:PROPERTIES:
5656:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5657:END:
5658
e388ae6f 5659#+begin_src bash :tangle no
b13e2dc1
AB
5660xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5661#+end_src
33c5a5cd 5662
72f329ba
AB
5663** toggle-tablet
5664:PROPERTIES:
5665:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5666:END:
5667
5668This script toggles between a 'normal' mode and a 'tablet' mode, doing
5669a few things:
5670
5671- rotates the screen using =xrandr=, so that rotating the physical
5672 display of my X220t would have the laptop's battery on the right
5673 hand side,
5674- enables touch screen,
5675- properly rotates the stylus pen and touch screen pointers, and
5676- toggles between RGB and Vertical BGR sub-pixel order.
5677
e388ae6f 5678#+begin_src bash :tangle no
72f329ba
AB
5679case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5680 0) # Screen is not rotated, we should rotate it right (90°)
5681 xrandr -o 3
5682 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5683 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5684 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5685 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5686 ;;
5687 1) # Currently top is rotated right, we should set it normal (0°)
5688 xrandr -o 0
5689 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5690 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5691 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5692 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5693 ;;
5694 *)
5695 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5696 exit 1
5697 ;;
5698esac
5699#+end_src
5700
2e877d14
AB
5701** unlock-def-gk.py
5702:PROPERTIES:
5703:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5704:END:
5705
e388ae6f 5706#+begin_src python :tangle no
2e877d14
AB
5707import gnomekeyring as gk
5708# list_item_ids_sync('login')[0] == 1L
5709gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5710#+end_src
5711
4fc8d5d2
AB
5712** volume-info
5713:PROPERTIES:
5714:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5715:END:
5716
6a056822 5717#+begin_src sh :tangle no
4fc8d5d2
AB
5718cur_vol=$(pamixer --get-volume)
5719
5720if [ $(pamixer --get-mute) = true ]; then
5721 printf 'mt \n' "$cur_vol"
5722else
5723 printf '%02d \n' "$cur_vol"
5724fi
5725#+end_src
5726
4f183f2a
AB
5727** wp
5728
5729My little wallpaper changer script.
5730
5731*** wp
5732:PROPERTIES:
5733:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5734:END:
5735
5736#+begin_src bash :tangle no
5737export DISPLAY=:0
5738
5739case "$1" in
5740 "day")
5741 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5742 ;;
5743 "night")
5744 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5745 ;;
5746 *)
5747 echo $"Usage: $0 {day|night}"
5748 exit 1
5749esac
5750#+end_src
5751
5752*** wp-auto
5753:PROPERTIES:
5754:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5755:END:
5756
5757#+begin_src bash :tangle no
5758SED=$(which sed)
5759ROFI=$(which rofi)
5760
5761export DISPLAY=:0
5762HOUR=$(date +%H)
5763
5764if [ -z "${SED}" ]
5765then
5766 echo "Did not find 'sed', script cannot continue."
5767 exit 1
5768fi
5769if [ -z "${ROFI}" ]
5770then
5771 echo "Did not find rofi, there is no point to continue."
5772 exit 1
5773fi
5774
5775###
5776# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5777# Repeated calls should leave the config clean-ish
5778###
5779function set_theme()
5780{
5781 CDIR="${HOME}/.config/rofi/"
5782 if [ ! -d "${CDIR}" ]
5783 then
5784 mkdir -p ${CDIR}
5785 fi
5786 if [ -f "${CDIR}/config" ]
5787 then
5788 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5789 fi
5790 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5791
5792}
5793
5794if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5795 then
5796 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5797 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5798 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5799 else
5800 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5801 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5802 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5803fi
5804#+end_src
5805
5806*** wp.service
5807:PROPERTIES:
5808:header-args+: :tangle ~/.config/systemd/user/wp.service
5809:END:
5810
5811#+begin_src conf :tangle no
5812[Unit]
5813Description=wallpaper service
5814
5815[Service]
5816Type=oneshot
5817ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5818#+end_src
5819
5820*** wp.timer
5821:PROPERTIES:
5822:header-args+: :tangle ~/.config/systemd/user/wp.timer
5823:END:
5824
5825#+begin_src conf :tangle no
5826[Unit]
5827[Unit]
5828Description=wallpaper timer
5829
5830[Timer]
5831OnCalendar=07,21:00
5832Unit=wp.service
5833Persistent=true
5834
5835[Install]
5836WantedBy=timers.target
5837#+end_src
5838
69a6fe26
AB
5839** zathura-sync.sh
5840:PROPERTIES:
5841:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5842:END:
5843
5844#+begin_src sh
5845pos="$1"
5846pdffile="$2"
5847zathura --synctex-forward "$pos" "$pdffile" || \
5848 (
5849 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5850 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5851#+end_src
33c5a5cd
AB
5852** Fun :)
5853
5854*** eat-em
5855:PROPERTIES:
5856:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5857:END:
5858
5859#+begin_src sh
5860# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5861# [ESC] character in original post removed here.
5862
5863# ANSI Color -- use these variables to easily have different color
5864# and format output. Make sure to output the reset sequence after
5865# colors (f = foreground, b = background), and use the 'off'
5866# feature for anything you turn on.
5867
5868initializeANSI()
5869{
5870 esc="$(echo -en '\e')"
5871
5872 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5873 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5874 cyanf="${esc}[36m"; whitef="${esc}[37m"
5875
5876 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5877 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5878 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5879
5880 boldon="${esc}[1m"; boldoff="${esc}[22m"
5881 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5882 ulon="${esc}[4m"; uloff="${esc}[24m"
5883 invon="${esc}[7m"; invoff="${esc}[27m"
5884
5885 reset="${esc}[0m"
5886}
5887
5888# note in this first use that switching colors doesn't require a reset
5889# first - the new color overrides the old one.
5890
5891#clear
5892
5893initializeANSI
5894
5895cat << EOF
5896
5897 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5898 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5899 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5900 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5901 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5902 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5903
5904 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5905 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5906 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5907 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5908 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5909 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5910
5911EOF
5912#+end_src
5913
33c5a5cd
AB
5914*** invade-em
5915:PROPERTIES:
5916:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5917:END:
5918
5919#+begin_src bash
5920#
5921# ANSI color scheme script featuring Space Invaders
5922#
5923# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5924# Modified by lolilolicon
5925#
5926
5927f=3 b=4
5928for j in f b; do
5929 for i in {0..7}; do
5930 printf -v $j$i %b "\e[${!j}${i}m"
5931 done
5932done
5933bld=$'\e[1m'
5934rst=$'\e[0m'
5935
5936cat << EOF
5937
5938 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5939 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5940 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5941 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5942
5943 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5944 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5945 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5946 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5947
5948
5949 $f7▌$rst
5950
5951 $f7▌$rst
5952
5953 $f7 ▄█▄ $rst
5954 $f7▄█████████▄$rst
5955 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5956
5957EOF
5958#+end_src