[rc] add default config for sway and don't tangle bspwm or X configs
[~bandali/configs] / rc.org
CommitLineData
08146d0e
AB
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
b13e2dc1
AB
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
b13e2dc1
AB
17** bspwm
18
19*** bspwmrc
20:PROPERTIES:
21:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22:END:
23
fb52d1f9 24#+begin_src sh :tangle no
b13e2dc1
AB
25sxhkd &
26sh ~/.fehbg &
27xfce4-panel -d &
87af8efd 28compton &
b13e2dc1
AB
29sleep 0.5 && pasystray --notify=all &
30
31bspc monitor -d I II III IV V VI VII VIII IX X
32#bspc monitor eDP-1 -d I II III IV V
33#bspc monitor HDMI-1 -d VI VII VIII IX X
34
35#bspc config border_width 2
36#bspc config window_gap 8
37bspc config window_gap 0
38
39bspc config bottom_padding 26
40
41bspc config split_ratio 0.52
42bspc config borderless_monocle true
43bspc config gapless_monocle true
44bspc config click_to_focus button1
45bspc config directional_focus_tightness low
46
87af8efd 47#bspc rule -a Firefox desktop='^1' follow=on
b13e2dc1
AB
48bspc rule -a Nightly desktop='^1' follow=on
49bspc rule -a Emacs desktop='^2' state=tiled follow=on
50#bspc rule -a Chromium desktop='^4' follow=on
51bspc rule -a URxvt state=floating
52bspc rule -a URxvt:tiled state=tiled
53bspc rule -a Connman-gtk state=floating
54bspc rule -a Xfce4-panel state=floating
55bspc rule -a TelegramDesktop state=floating
56bspc rule -a Ec state=floating
57bspc rule -a Pavucontrol state=floating
58bspc rule -a Eog state=floating
59bspc rule -a Seahorse state=floating
60bspc rule -a mpv state=floating
61bspc rule -a Evince state=floating
62bspc rule -a Meld state=floating
63bspc rule -a Autokey-gtk state=floating
64bspc rule -a Mousepad state=floating
65bspc rule -a Wrapper-1.0 state=floating
66bspc rule -a File-roller state=floating
67bspc rule -a Gnome-disks state=floating
68bspc rule -a Termite state=floating
69bspc rule -a Termite:tiled state=tiled
70bspc rule -a Thunderbird:Calendar state=floating
71bspc rule -a Audacity state=floating
72bspc rule -a Proof state=floating # pvs x-show-proof
73bspc rule -a Nm-connection-editor state=floating
74bspc rule -a Wire state=floating
75bspc rule -a discord state=floating
76bspc rule -a X2goclient state=floating
77bspc rule -a SimpleScreenRecorder state=floating
78bspc rule -a Gimp state=floating
79bspc rule -a Wrapper-2.0 state=floating
80bspc rule -a Zathura state=tiled
81#+end_src
82
83*** sxhkdrc
84:PROPERTIES:
85:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86:END:
87
fb52d1f9 88#+begin_src conf :tangle no
b13e2dc1
AB
89#
90# wm independent hotkeys
91#
92
93# terminal emulator
94super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97#super + {_,shift} + Return
98# termite{_, --name=tiled}
99
100# program launcher
101super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104super + alt + space
105 xfce4-popup-whiskermenu
106
107# window finder
108super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111# password manager
112alt + space
113 rofi-pass
114
115# firefox
116#super + r
117# firefox
118
119# chromium
120#super + c
121# chromium -incognito
122
123# emacs
124super + e
125 emacs
126
127# make sxhkd reload its configuration files:
128super + Escape
129 pkill -USR1 -x sxhkd
130
131# volume {up,down}
132XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135# mute
136XF86AudioMute
137 pamixer --toggle-mute
138
373a060a
AB
139XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
b13e2dc1
AB
142# playback control
143XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146# lock the screen
147super + shift + q
148 light-locker-command -l
149
150# Toggle keyboard layout
151super + F7
152 toggle-layout
153
154# Toggle Xfce presentation mode
155XF86LaunchB
156 toggle-presentation-mode
157
158# monitor brightness
159XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162super + apostrophe
163 rofi-light
164
165# keyboard brightness
166#XF86KbdBrightness{Up,Down}
167# kbdlight {up,down}
168
72f329ba
AB
169XF86RotateWindows
170 toggle-tablet
171
b13e2dc1
AB
172#
173# bspwm hotkeys
174#
175
176# quit bspwm normally
177super + alt + Escape
178 bspc quit
179
180# close and kill
181super + {w,q}
182 bspc node -{c,k}
183
184# alternate between the tiled and monocle layout
185super + m
186 bspc desktop -l next
187
188# send the newest marked node to the newest preselected node
189super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192# swap the current node and the biggest node
193super + g
194 bspc node -s biggest
195
196#
197# state/flags
198#
199
200# set the window state
201super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204# set the node flags
205super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208#
209# focus/swap
210#
211
212# focus the node in the given direction
213super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216# focus the node for the given path jump
217super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220# focus the next/previous node in the current desktop
221super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224# focus the next/previous desktop in the current monitor
225super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228# send to next/prev desktop
229super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232# focus the last node/desktop
233super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236# focus the older or newer node in the focus history
237super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242# focus or send to the given desktop
243super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246#
247# preselect
248#
249
250# preselect the direction
251super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254# preselect the ratio
255super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258# cancel the preselection for the focused node
259super + ctrl + space
260 bspc node -p cancel
261
262# cancel the preselection for the focused desktop
263super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266#
267# move/resize
268#
269
270# expand a window by moving one of its side outward
271super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274# contract a window by moving one of its side inward
275super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278# move a floating window
279super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282#alt + bracket{left,right}
283# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284#+end_src
285
286** compton
287:PROPERTIES:
288:header-args+: :tangle ~/.config/compton.conf
289:END:
290
fb52d1f9 291#+begin_src conf :tangle no
b13e2dc1
AB
292# Shadow
293shadow = false; # Enabled client-side shadows on windows.
294no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295no-dnd-shadow = true; # Don't draw shadows on DND windows.
296clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298shadow-radius = 5; # The blur radius for shadows. (default 12)
299shadow-offset-x = -5; # The left offset for shadows. (default -15)
300shadow-offset-y = -5; # The top offset for shadows. (default -15)
301# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306# shadow-exclude = "n:e:Notification";
307#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311# Opacity
312menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323# blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326# blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332# Fading
333fading = false; # Fade windows during opacity changes.
334fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338fade-exclude = [ ]; # Exclude conditions for fading.
339
340# Other
341backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355dbe = false; # Enable DBE painting mode. Rarely needed.
356paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368# GLX backend # GLX backend fine-tune options. See man page for more info.
369glx-no-stencil = true; # Recommended.
370glx-copy-from-front = false; # Useful with --glx-swap-method,
371# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372# glx-no-rebind-pixmap = true; # Recommended if it works.
373glx-no-rebind-pixmap = true; # Recommended if it works.
374#glx-swap-method = "4"; # See man page.
375glx-swap-method = "4"; # See man page.
376
377# Window type settings
378wintypes:
379{
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389};
390#+end_src
391
05ab13aa
AB
392** Dunst
393:PROPERTIES:
394:header-args+: :tangle ~/.config/dunst/dunstrc
395:END:
396
397#+begin_src conf
398[global]
399#font = Ubuntu Mono 10.5
400font = Inconsolata 11
401
402# Path to default icons.
403icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405icon_position = left
406# <b>bold</b>
407# <i>italic</i>
408# <s>strikethrough<s/>
409# <u>underline</u>
410markup = full
411# The format of the message. Possible variables are:
412# %a appname
413# %s summary
414# %b body
415# %i iconname (including its path)
416# %I iconname (without its path)
417# %p progress value if set ([ 0%] to [100%]) or nothing
418# Markup is allowed
419format = "<b>%s</b>\n%b"
420# Sort messages by urgency
421sort = yes
422# Show how many messages are currently hidden (because of geometry)
423indicate_hiddenl= no
424# Alignment of message text.
425# Possible values are "left", "center" and "right"
426alignment = center
427# The frequency with wich text that is longer than the notification
428# window allows bounces back and forth.
429# This option conflicts with 'word_wrap'.
430# Set to 0 to disable
431bounce_freq = 3
432# show age of message if message is older than show_age_threshold seconds.
433# set to -1 to disable
434show_age_threshold = -1
435# split notifications into multiple lines if they don't fit into geometry
436word_wrap = yes
437# ignore newlines '\n' in notifications
438ignore_newline = no
439# The geometry of the message window.
440# geometry [{width}]x{height}][+/-{x}+/-{y}]
441# The height is measured in number of notifications everything else in pixels. If the width
442# is omitted but the height is given ("-geometry x2"), the message window
443# expands over the whole screen (dmenu-like). If width is 0,
444# the window expands to the longest message displayed.
445# A positive x is measured from the left, a negative from the
446# right side of the screen. Y is measured from the top and down respectevly.
447# The width can be negative. In this case the actual width is the
448# screen width minus the width defined in within the geometry option.
449#geometry = "410x12-12+12"
450#geometry = "0x0-30-30"
451geometry = "260x12-30-30"
452# The transparency of the window. range: [0; 100]
453# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454transparency = 0
455# Don't remove messages, if the user is idle (no mouse or keyboard input)
456# for longer than idle_threshold seconds.
457# Set to 0 to disable.
458idle_threshold = 120
459# Which monitor should the notifications be displayed on.
460monitor = 0
461# Display notification on focused monitor. Possible modes are:
462# mouse: follow mouse pointer
463# keyboard: follow window with keyboard focus
464# none: don't follow anything
465#
466# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467# This should be the case for almost all modern windowmanagers.
468#
469# If this option is set to mouse or keyboard, the monitor option will be
470# ignored.
471follow = keyboard
472# should a notification popped up from history be sticky or
473# timeout as if it would normally do.
474sticky_history = yes
475# The height of a single line. If the height is smaller than the font height,
476# it will get raised to the font height.
477# This adds empty space above and under the text.
478line_height = 0
479
480show_indicators = yes
481
482# Draw a line of 'separatpr_height' pixel height between two notifications.
483# Set to 0 to disable
484separator_height = 3
485# padding between text and separator
486padding = 8
487# horizontal padding
488horizontal_padding = 8
489# Define a color for the separator.
490# possible values are:
491# * auto: dunst tries to find a color fitting to the background
492# * foreground: use the same color as the foreground
493# * frame: use the same color as the frame.
494# * anything else will be interpreted as a X color
495separator_color = foreground
496# print a notification on startup
497# This is mainly for error detection, since dbus (re-)starts dunst
498# automatically after a crash.
499startup_notification = false
500# dmenu path
501#dmenu = /usr/bin/dmenu -p dunst:
502dmenu = /usr/bin/rofi -dmenu -p dunst:
503# browser for opening urls in context menu
504browser = /usr/bin/firefox -new-tab
505[frame]
506width = 0
507color = "#377222"
508[shortcuts]
509# shortcuts are specified as [modifier+][modifier+]...key
510# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511# and 'mod4' (windows-key)
512# xev might be helpful to find names for keys
513# close notification
514close = ctrl+space
515# close all notifications
516close_all = ctrl+shift+space
517# redisplay last message(s)
518# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519history = ctrl+shift+h
520# context menu
521context = ctrl+shift+period
522[urgency_low]
523# IMPORTANT: colors have to be defined in quotation marks.
524# Otherwise the '#' and following would be interpreted as a comment.
525background = "#1d2a30"
526foreground = "#71c2af"
527timeout = 3
528[urgency_normal]
529background = "#1d2a30"
530foreground = "#71c2af"
531timeout = 0
532[urgency_critical]
533background = "#1d2a30"
534foreground = "#ff9982"
535timeout = 0
536
537# Every section that isn't one of the above is interpreted as a rules
538# to override settings for certain messages.
539# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540# and you can override the 'timeout', 'urgency', 'foreground', 'background'
541# and 'format'.
542# Shell-like globbing will get expanded.
543#
544# SCRIPTING
545# you can specify a script that gets run when the rule matches by setting
546# the 'script' option.
547# The script will be called as follows:
548# script appname summary body icon urgency
549# where urgency can be "LOW", "NORMAL" or "CRITICAL".
550#
551# NOTE: if you don't want a notification to be displayed, set the format to ""
552# NOTE: It might be helpful to run dunst -print in a terminal in order to find
553# fitting options for rules.
554#[espeak]
555# summary = "*"
556# script = dunst_espeak.sh
557#[script-test]
558# summary = "*script*"
559# script = dunst_test.sh
560#[ignore]
561## This notification will not be displayed
562# summary = "foobar"
563# format = ""
564#[signed_on]
565# appname = Pidgin
566# summary = "*signed on*"
567# urgency = low
568#
569#[signed_off]
570# appname = Pidgin
571# summary = *signed off*
572# urgency = low
573#
574#[says]
575# appname = Pidgin
576# summary = *says*
577# urgency = critical
578#
579#[twitter]
580# appname = Pidgin
581# summary = *twitter.com*
582# urgency = normal
583#
584[xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587#+end_src
588
589** Fontconfig
590:PROPERTIES:
45d84997 591:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
05ab13aa
AB
592:END:
593
594#+begin_src xml
595<?xml version="1.0"?>
596<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597<fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
628 <accept>
629 <family>Liberation Sans</family>
630 </accept>
631</alias>
632</fontconfig>
633#+end_src
634
58cbbce2 635** Git
08146d0e
AB
636
637*** gitconfig
638:PROPERTIES:
639:header-args+: :tangle ~/.gitconfig
640:END:
641
642**** user
643#+begin_src conf
644[user]
645 name = Amin Bandali
646 email = amin@aminb.org
5c7c14c7 647 signingkey = 4E05246AB0BF7FFB
08146d0e
AB
648#+end_src
649
650**** signing
651#+begin_src conf
5c7c14c7
AB
652[commit]
653 gpgsign = true
08146d0e
AB
654# [format]
655# signoff = true
656#+end_src
657
658**** core
659#+begin_src conf
660[core]
661 autocrlf = input # CRLF -> LF on commit
662 editor = emacsclient -t
663 excludesfile = ~/.gitignore_global
664 pager = "less"
665#+end_src
666
667**** gpg
668#+begin_src conf
669[gpg]
670 program = gpg2
671#+end_src
672
673**** alias
674#+begin_src conf
675[alias]
676 git = !exec git # handle nested git calls, e.g. git git status
677 aliases = config --get-regexp '^alias\\.'
678 a = add
679 s = status
680 sl = status --long
681 c = checkout
682 cb = checkout -b
683 b = branch
684 r = rebase
685 p = pull
686 pr = pull --rebase
687 ps = push
688 psf = push --force
689#+end_src
690
691**** color
692#+begin_src conf
693[color]
694 ui = auto
695[color "status"]
696 added = green bold
697 changed = red bold
698 untracked = red bold
699[color "branch"]
700 current = green bold
701 remote = magenta bold
702[color "diff"]
703 new = green bold
704 old = red bold
705#+end_src
706
707**** status
708#+begin_src conf
709[status]
710 # showUntrackedFiles = all
711 short=true
712 branch=true
713#+end_src
714
715**** github
716#+begin_src conf
717[github]
718 user = aminb
719#+end_src
720
5c7c14c7
AB
721**** send-email
722#+begin_src conf
723[sendemail]
724 smtpuser = amin@aminb.org
725 smtpserver = nix.aminb.org
726 smtpserverport = 587
727 smtpencryption = tls
728 annotate = yes
729#+end_src
730
08146d0e
AB
731*** gitignore
732:PROPERTIES:
733:header-args+: :tangle ~/.gitignore_global
734:END:
735
736#+begin_src conf
737*.orig
738*.py[co]
739*.sublime-workspace
740*~
741.DS_Store
742*.elc
743*-autoloads.el
744#+end_src
58cbbce2
AB
745
746** Latexmk
747:PROPERTIES:
748:header-args+: :tangle ~/.latexmkrc
749:END:
750
751#+begin_src conf
752$pdf_previewer = "start zathura %O %S";
753$clean_ext = "aux out";
754
755# $pdf_update_method = 4;
756# $pdf_update_command = "zathura %O %S";
757
758# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
759# by Ctrl+click in the PDF.
760# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
761# editor.
762# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
763#+end_src
b13e2dc1 764
434b1815
AB
765** libinput
766
767Improve XPS 15 9560's touchpad experience.
768
fb52d1f9
AB
769# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
770#+begin_src conf :tangle no
434b1815
AB
771Section "InputClass"
772 Identifier "libinput touchpad catchall"
773 Driver "libinput"
774 MatchIsTouchpad "on"
775 Option "ClickMethod" "clickfinger"
776 Option "NaturalScrolling" "true"
777 Option "Tapping" "on"
778 Option "TappingButtonMap" "lrm"
779EndSection
780#+end_src
781
931a4b06
AB
782** getmail
783
784*** getmailrc
785:PROPERTIES:
786:header-args+: :tangle ~/.getmail/getmailrc
787:END:
788
789#+begin_src conf
790[retriever]
791type = SimplePOP3SSLRetriever
792server = fencepost.gnu.org
793username = aminb
18faca55 794password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
931a4b06
AB
795port = 995
796use_apop = True
797
798[destination]
799type = Maildir
800path = ~/mail/gnu/Inbox/
801
802[options]
803delete = True
804#+end_src
805
806*** getmail.service
807:PROPERTIES:
808:header-args+: :tangle ~/.config/systemd/user/getmail.service
809:END:
810
811#+begin_src conf :tangle no
812[Unit]
813Description=getmail service
814
815[Service]
816Type=oneshot
817ExecStart=/usr/bin/getmail
818StandardOutput=syslog
819StandardError=syslog
820#+end_src
821
822*** getmail.timer
823:PROPERTIES:
824:header-args+: :tangle ~/.config/systemd/user/getmail.timer
825:END:
826
827#+begin_src conf :tangle no
828[Unit]
829Description=getmail timer
830
831[Timer]
832OnCalendar=*:0/30
833Persistent=true
834Unit=getmail.service
835
836[Install]
837WantedBy=timers.target
838#+end_src
839
840** GnuPG
841:PROPERTIES:
842:header-args+: :tangle ~/.gnupg/gpg-agent.conf
843:END:
844
845#+begin_src conf
846default-cache-ttl 43200
847max-cache-ttl 43200
848
849default-cache-ttl-ssh 10800
850max-cache-ttl-ssh 10800
851
852# pinentry-program /usr/bin/pinentry-qt
853#+end_src
854
be76c6db
AB
855** GTK
856
857*** gtk-2.0
858:PROPERTIES:
859:header-args+: :tangle ~/.gtkrc-2.0
860:END:
861
862#+begin_src conf
863gtk-theme-name="Greybird"
864gtk-icon-theme-name="Paper"
865gtk-font-name="Ubuntu 10"
866gtk-menu-images=0
867# gtk-key-theme-name = "Emacs"
868#+end_src
869
870*** gtk-3.0
871:PROPERTIES:
872:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
873:END:
874
875#+begin_src conf :tangle no
876[Settings]
877gtk-icon-theme-name = Paper
878# gtk-theme-name = Adwaita
879
880gtk-theme-name = Greybird
881# gtk-theme-name = Arc-Darker
882# gtk-theme-name = Numix-ArchBlue
883
884gtk-font-name = Ubuntu 10
885# gtk-key-theme-name = Emacs
886#+end_src
887
888** isync
889
890*** mbsyncrc
891:PROPERTIES:
892:header-args+: :tangle ~/.mbsyncrc
893:END:
894
895#+begin_src conf
896# Global defaults
897CopyArrivalDate yes
898
899######
900IMAPAccount amin
901Host nix.aminb.org
902User amin@aminb.org
903PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
904SSLType IMAPS
905
906IMAPStore amin-remote
907Account amin
908
909MaildirStore amin-local
910Path ~/mail/amin/
911Inbox ~/mail/amin/Inbox
912SubFolders Verbatim
913
914Channel amin
915Master :amin-remote:
916Slave :amin-local:
917Patterns * !dovecot*
918Create Both
919SyncState *
920
921######
922IMAPAccount uwaterloo
923Host connect.uwaterloo.ca
59027673 924User abandali
be76c6db
AB
925PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
926SSLType IMAPS
927
928IMAPStore uwaterloo-remote
929Account uwaterloo
930
931MaildirStore uwaterloo-local
932Path ~/mail/uwaterloo/
933Inbox ~/mail/uwaterloo/Inbox
934SubFolders Verbatim
935
936Channel uwaterloo
937Master :uwaterloo-remote:
938Slave :uwaterloo-local:
939Patterns * !dovecot*
940Create Both
941SyncState *
942#+end_src
943
944*** mbsync.service
945:PROPERTIES:
946:header-args+: :tangle ~/.config/systemd/user/mbsync.service
947:END:
948
949#+begin_src conf :tangle no
950[Unit]
951Description=mbsync service
952
953[Service]
954Type=oneshot
955ExecStart=/usr/bin/mbsync -Va
956StandardOutput=syslog
957StandardError=syslog
958#+end_src
959
960*** mbsync.timer
961:PROPERTIES:
962:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
963:END:
964
965#+begin_src conf :tangle no
966[Unit]
967Description=mbsync timer
968
969[Timer]
970OnCalendar=*:0/15
971Persistent=true
972Unit=mbsync.service
973
974[Install]
975WantedBy=timers.target
976#+end_src
977
59027673
AB
978** mpd
979:PROPERTIES:
980:header-args+: :tangle ~/.config/mpd/mpd.conf
981:END:
982
983#+begin_src conf
984# An example configuration file for MPD.
985# Read the user manual for documentation: http://www.musicpd.org/doc/user/
986
987
988# Files and directories #######################################################
989#
990# This setting controls the top directory which MPD will search to discover the
991# available audio files and add them to the daemon's online database. This
992# setting defaults to the XDG directory, otherwise the music directory will be
993# be disabled and audio files will only be accepted over ipc socket (using
994# file:// protocol) or streaming files over an accepted protocol.
995#
996music_directory "~/usr/music"
997#
998# This setting sets the MPD internal playlist directory. The purpose of this
999# directory is storage for playlists created by MPD. The server will use
1000# playlist files not created by the server but only if they are in the MPD
1001# format. This setting defaults to playlist saving being disabled.
1002#
1003playlist_directory "~/.mpd/playlists"
1004#
1005# This setting sets the location of the MPD database. This file is used to
1006# load the database at server start up and store the database while the
1007# server is not up. This setting defaults to disabled which will allow
1008# MPD to accept files over ipc socket (using file:// protocol) or streaming
1009# files over an accepted protocol.
1010#
1011db_file "~/.mpd/database"
1012#
1013# These settings are the locations for the daemon log files for the daemon.
1014# These logs are great for troubleshooting, depending on your log_level
1015# settings.
1016#
1017# The special value "syslog" makes MPD use the local syslog daemon. This
1018# setting defaults to logging to syslog, otherwise logging is disabled.
1019#
1020log_file "~/.mpd/log"
1021#
1022# This setting sets the location of the file which stores the process ID
1023# for use of mpd --kill and some init scripts. This setting is disabled by
1024# default and the pid file will not be stored.
1025#
1026pid_file "~/.mpd/pid"
1027#
1028# This setting sets the location of the file which contains information about
1029# most variables to get MPD back into the same general shape it was in before
1030# it was brought down. This setting is disabled by default and the server
1031# state will be reset on server start up.
1032#
1033state_file "~/.mpd/state"
1034#
1035# The location of the sticker database. This is a database which
1036# manages dynamic information attached to songs.
1037#
1038sticker_file "~/.mpd/sticker.sql"
1039#
1040###############################################################################
1041
1042
1043# General music daemon options ################################################
1044#
1045# This setting specifies the user that MPD will run as. MPD should never run as
1046# root and you may use this setting to make MPD change its user ID after
1047# initialization. This setting is disabled by default and MPD is run as the
1048# current user.
1049#
1050#user "nobody"
1051#
1052# This setting specifies the group that MPD will run as. If not specified
1053# primary group of user specified with "user" setting will be used (if set).
1054# This is useful if MPD needs to be a member of group such as "audio" to
1055# have permission to use sound card.
1056#
1057#group "nogroup"
1058#
1059# This setting sets the address for the daemon to listen on. Careful attention
1060# should be paid if this is assigned to anything other then the default, any.
1061# This setting can deny access to control of the daemon. Not effective if
1062# systemd socket activiation is in use.
1063#
1064# For network
1065#bind_to_address "any"
1066#
1067# And for Unix Socket
1068#bind_to_address "~/.mpd/socket"
1069#
1070# This setting is the TCP port that is desired for the daemon to get assigned
1071# to.
1072#
1073#port "6600"
1074#
1075# This setting controls the type of information which is logged. Available
1076# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1077# argument is recommended for troubleshooting, though can quickly stretch
1078# available resources on limited hardware storage.
1079#
1080#log_level "default"
1081#
1082# If you have a problem with your MP3s ending abruptly it is recommended that
1083# you set this argument to "no" to attempt to fix the problem. If this solves
1084# the problem, it is highly recommended to fix the MP3 files with vbrfix
1085# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1086# point gapless MP3 playback can be enabled.
1087#
1088#gapless_mp3_playback "yes"
1089#
1090# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1091# of starting playback after startup.
1092#
1093#restore_paused "no"
1094#
1095# This setting enables MPD to create playlists in a format usable by other
1096# music players.
1097#
1098#save_absolute_paths_in_playlists "no"
1099#
1100# This setting defines a list of tag types that will be extracted during the
1101# audio file discovery process. The complete list of possible values can be
1102# found in the user manual.
1103#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1104#
1105# This setting enables automatic update of MPD's database when files in
1106# music_directory are changed.
1107#
1108#auto_update "yes"
1109#
1110# Limit the depth of the directories being watched, 0 means only watch
1111# the music directory itself. There is no limit by default.
1112#
1113#auto_update_depth "3"
1114#
1115###############################################################################
1116
1117
1118# Symbolic link behavior ######################################################
1119#
1120# If this setting is set to "yes", MPD will discover audio files by following
1121# symbolic links outside of the configured music_directory.
1122#
1123#follow_outside_symlinks "yes"
1124#
1125# If this setting is set to "yes", MPD will discover audio files by following
1126# symbolic links inside of the configured music_directory.
1127#
1128#follow_inside_symlinks "yes"
1129#
1130###############################################################################
1131
1132
1133# Zeroconf / Avahi Service Discovery ##########################################
1134#
1135# If this setting is set to "yes", service information will be published with
1136# Zeroconf / Avahi.
1137#
1138#zeroconf_enabled "yes"
1139#
1140# The argument to this setting will be the Zeroconf / Avahi unique name for
1141# this MPD server on the network.
1142#
1143#zeroconf_name "Music Player"
1144#
1145###############################################################################
1146
1147
1148# Permissions #################################################################
1149#
1150# If this setting is set, MPD will require password authorization. The password
1151# setting can be specified multiple times for different password profiles.
1152#
1153#password "password@read,add,control,admin"
1154#
1155# This setting specifies the permissions a user has who has not yet logged in.
1156#
1157#default_permissions "read,add,control,admin"
1158#
1159###############################################################################
1160
1161
1162# Database #######################################################################
1163#
1164
1165#database {
1166# plugin "proxy"
1167# host "other.mpd.host"
1168# port "6600"
1169#}
1170
1171# Input #######################################################################
1172#
1173
1174input {
1175 plugin "curl"
1176# proxy "proxy.isp.com:8080"
1177# proxy_user "user"
1178# proxy_password "password"
1179}
1180
1181#
1182###############################################################################
1183
1184# Audio Output ################################################################
1185#
1186
1187audio_output {
1188 type "pulse"
1189 name "pulse audio"
1190}
1191
1192audio_output {
1193 type "fifo"
1194 name "my_fifo"
1195 path "/tmp/mpd.fifo"
1196 format "44100:16:2"
1197}
1198
1199# MPD supports various audio output types, as well as playing through multiple
1200# audio outputs at the same time, through multiple audio_output settings
1201# blocks. Setting this block is optional, though the server will only attempt
1202# autodetection for one sound card.
1203#
1204# An example of an ALSA output:
1205#
1206#audio_output {
1207# type "alsa"
1208# name "My ALSA Device"
1209## device "hw:0,0" # optional
1210## mixer_type "hardware" # optional
1211## mixer_device "default" # optional
1212## mixer_control "PCM" # optional
1213## mixer_index "0" # optional
1214#}
1215#
1216# An example of an OSS output:
1217#
1218#audio_output {
1219# type "oss"
1220# name "My OSS Device"
1221## device "/dev/dsp" # optional
1222## mixer_type "hardware" # optional
1223## mixer_device "/dev/mixer" # optional
1224## mixer_control "PCM" # optional
1225#}
1226#
1227# An example of a shout output (for streaming to Icecast):
1228#
1229#audio_output {
1230# type "shout"
1231# encoder "vorbis" # optional
1232# name "My Shout Stream"
1233# host "localhost"
1234# port "8000"
1235# mount "/mpd.ogg"
1236# password "hackme"
1237# quality "5.0"
1238# bitrate "128"
1239# format "44100:16:1"
1240## protocol "icecast2" # optional
1241## user "source" # optional
1242## description "My Stream Description" # optional
1243## url "http://example.com" # optional
1244## genre "jazz" # optional
1245## public "no" # optional
1246## timeout "2" # optional
1247## mixer_type "software" # optional
1248#}
1249#
1250# An example of a recorder output:
1251#
1252#audio_output {
1253# type "recorder"
1254# name "My recorder"
1255# encoder "vorbis" # optional, vorbis or lame
1256# path "/var/lib/mpd/recorder/mpd.ogg"
1257## quality "5.0" # do not define if bitrate is defined
1258# bitrate "128" # do not define if quality is defined
1259# format "44100:16:1"
1260#}
1261#
1262# An example of a httpd output (built-in HTTP streaming server):
1263#
1264#audio_output {
1265# type "httpd"
1266# name "My HTTP Stream"
1267# encoder "vorbis" # optional, vorbis or lame
1268# port "8000"
1269# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1270## quality "5.0" # do not define if bitrate is defined
1271# bitrate "128" # do not define if quality is defined
1272# format "44100:16:1"
1273# max_clients "0" # optional 0=no limit
1274#}
1275#
1276# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1277#
1278#audio_output {
1279# type "pulse"
1280# name "My Pulse Output"
1281## server "remote_server" # optional
1282## sink "remote_server_sink" # optional
1283#}
1284#
1285# An example of a winmm output (Windows multimedia API).
1286#
1287#audio_output {
1288# type "winmm"
1289# name "My WinMM output"
1290## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1291# or
1292## device "0" # optional
1293## mixer_type "hardware" # optional
1294#}
1295#
1296# An example of an openal output.
1297#
1298#audio_output {
1299# type "openal"
1300# name "My OpenAL output"
1301## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1302#}
1303#
1304# An example of an sndio output.
1305#
1306#audio_output {
1307# type "sndio"
1308# name "sndio output"
1309# mixer_type "software"
1310#}
1311#
1312# An example of an OS X output:
1313#
1314#audio_output {
1315# type "osx"
1316# name "My OS X Device"
1317## device "Built-in Output" # optional
1318## channel_map "-1,-1,0,1" # optional
1319#}
1320#
1321## Example "pipe" output:
1322#
1323#audio_output {
1324# type "pipe"
1325# name "my pipe"
1326# command "aplay -f cd 2>/dev/null"
1327## Or if you're want to use AudioCompress
1328# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1329## Or to send raw PCM stream through PCM:
1330# command "nc example.org 8765"
1331# format "44100:16:2"
1332#}
1333#
1334## An example of a null output (for no audio output):
1335#
1336#audio_output {
1337# type "null"
1338# name "My Null Output"
1339# mixer_type "none" # optional
1340#}
1341#
1342###############################################################################
1343
1344
1345# Normalization automatic volume adjustments ##################################
1346#
1347# This setting specifies the type of ReplayGain to use. This setting can have
1348# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1349# chooses between "track" and "album" depending on the current state of
1350# random playback. If random playback is enabled then "track" mode is used.
1351# See <http://www.replaygain.org> for more details about ReplayGain.
1352# This setting is off by default.
1353#
1354#replaygain "album"
1355#
1356# This setting sets the pre-amp used for files that have ReplayGain tags. By
1357# default this setting is disabled.
1358#
1359#replaygain_preamp "0"
1360#
1361# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1362# By default this setting is disabled.
1363#
1364#replaygain_missing_preamp "0"
1365#
1366# This setting enables or disables ReplayGain limiting.
1367# MPD calculates actual amplification based on the ReplayGain tags
1368# and replaygain_preamp / replaygain_missing_preamp setting.
1369# If replaygain_limit is enabled MPD will never amplify audio signal
1370# above its original level. If replaygain_limit is disabled such amplification
1371# might occur. By default this setting is enabled.
1372#
1373#replaygain_limit "yes"
1374#
1375# This setting enables on-the-fly normalization volume adjustment. This will
1376# result in the volume of all playing audio to be adjusted so the output has
1377# equal "loudness". This setting is disabled by default.
1378#
1379#volume_normalization "no"
1380#
1381###############################################################################
1382
1383# Character Encoding ##########################################################
1384#
1385# If file or directory names do not display correctly for your locale then you
1386# may need to modify this setting.
1387#
1388#filesystem_charset "UTF-8"
1389#
1390###############################################################################
1391#+end_src
1392
1393** msmtp
1394:PROPERTIES:
1395:header-args+: :tangle ~/.msmtprc
1396:END:
1397
1398#+begin_src conf
1399# Set default values for all following accounts.
1400defaults
1401port 587
1402tls on
1403auth on
1404#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1405logfile ~/.msmtp.log
1406
1407# aminb
1408account aminb
1409host nix.aminb.org
2a1be6b4 1410tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
59027673
AB
1411tls_starttls on
1412from amin@aminb.org
1413user amin@aminb.org
1414passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1415
1416# gnu
1417account gnu
1418host fencepost.gnu.org
1e55aaa3
AB
1419# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1420tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
59027673
AB
1421tls_starttls on
1422from aminb@gnu.org
1423user aminb
1424passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1425
1426# uwaterloo
1427account uwaterloo
1428host connect.uwaterloo.ca
1429tls_starttls on
1430from abandali@uwaterloo.ca
1431user abandali
1432passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1433tls_trust_file /etc/ssl/certs/ca-certificates.crt
1434
1435# uwaterloo (friendly address)
1436account uwaterloo-friendly : uwaterloo
1437from amin.bandali@uwaterloo.ca
1438
1439# Set a default account
1440account default : aminb
1441#+end_src
1442
1443** ncmpcpp
1444
1445*** config
1446:PROPERTIES:
1447:header-args+: :tangle ~/.ncmpcpp/config
1448:END:
1449
1450#+begin_src conf :tangle no
1451##############################################################
1452## This is the example configuration file. Copy it to ##
1453## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1454## and set up your preferences. ##
1455##############################################################
1456#
1457##### directories ######
1458##
1459## Directory for storing ncmpcpp related files.
1460## Changing it is useful if you want to store
1461## everything somewhere else and provide command
1462## line setting for alternative location to config
1463## file which defines that while launching ncmpcpp.
1464##
1465#
1466ncmpcpp_directory = ~/.ncmpcpp
1467#
1468##
1469## Directory for storing downloaded lyrics. It
1470## defaults to ~/.lyrics since other MPD clients
1471## (eg. ncmpc) also use that location.
1472##
1473#
1474#lyrics_directory = ~/.lyrics
1475#
1476##### connection settings #####
1477#
1478#mpd_host = localhost
1479#
1480#mpd_port = 6600
1481#
1482#mpd_connection_timeout = 5
1483#
1484## Needed for tag editor and file operations to work.
1485##
1486mpd_music_dir = ~/usr/music
1487#
1488#mpd_crossfade_time = 5
1489#
1490##### music visualizer #####
1491##
1492## Note: In order to make music visualizer work you'll
1493## need to use mpd fifo output, whose format parameter
1494## has to be set to 44100:16:1 for mono visualization
1495## or 44100:16:2 for stereo visualization. Example
1496## configuration (it has to be put into mpd.conf):
1497##
1498## audio_output {
1499## type "fifo"
1500## name "Visualizer feed"
1501## path "/tmp/mpd.fifo"
1502## format "44100:16:2"
1503## }
1504##
1505#
1506visualizer_fifo_path = /tmp/mpd.fifo
1507#
1508##
1509## Note: Below parameter is needed for ncmpcpp
1510## to determine which output provides data for
1511## visualizer and thus allow syncing between
1512## visualization and sound as currently there
1513## are some problems with it.
1514##
1515#
1516visualizer_output_name = my fifo
1517#
1518##
1519## If you set format to 44100:16:2, make it 'yes'.
1520##
1521visualizer_in_stereo = yes
1522#
1523##
1524## Multiply received samples by given value. Very
1525## useful for proper visualization of quiet music.
1526##
1527#visualizer_sample_multiplier = 1
1528#
1529##
1530## Note: Below parameter defines how often ncmpcpp
1531## has to "synchronize" visualizer and audio outputs.
1532## 30 seconds is optimal value, but if you experience
1533## synchronization problems, set it to lower value.
1534## Keep in mind that sane values start with >=10.
1535##
1536#
1537visualizer_sync_interval = 30
1538#
1539##
1540## Note: To enable spectrum frequency visualization
1541## you need to compile ncmpcpp with fftw3 support.
1542##
1543#
1544## Available values: spectrum, wave, wave_filled, ellipse.
1545##
1546visualizer_type = spectrum
1547#
1548#visualizer_look = ●▮
1549visualizer_look = "●•"
1550#
1551#visualizer_color = blue, cyan, green, yellow, magenta, red
1552#
1553## Alternative subset of 256 colors for terminals that support it.
1554##
1555#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1556#
1557##### system encoding #####
1558##
1559## ncmpcpp should detect your charset encoding
1560## but if it failed to do so, you can specify
1561## charset encoding you are using here.
1562##
1563## Note: You can see whether your ncmpcpp build
1564## supports charset detection by checking output
1565## of `ncmpcpp --version`.
1566##
1567## Note: Since MPD uses UTF-8 by default, setting
1568## this option makes sense only if your encoding
1569## is different.
1570##
1571#
1572#system_encoding = ""
1573#
1574##### delays #####
1575#
1576## Time of inactivity (in seconds) after playlist
1577## highlighting will be disabled (0 = always on).
1578##
1579#playlist_disable_highlight_delay = 5
1580#
1581## Defines how long messages are supposed to be visible.
1582##
1583#message_delay_time = 5
1584#
1585##### song format #####
1586##
1587## For a song format you can use:
1588##
1589## %l - length
1590## %f - filename
1591## %D - directory
1592## %a - artist
1593## %A - album artist
1594## %t - title
1595## %b - album
1596## %y - date
1597## %n - track number (01/12 -> 01)
1598## %N - full track info (01/12 -> 01/12)
1599## %g - genre
1600## %c - composer
1601## %p - performer
1602## %d - disc
1603## %C - comment
1604## %P - priority
1605## $R - begin right alignment
1606##
1607## If you want to make sure that a part of the format is displayed
1608## only when certain tags are present, you can archieve it by
1609## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1610## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1611## It is also possible to define a list of alternatives by providing
1612## several groups and separating them with '|', e.g. '{%t}|{%f}'
1613## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1614## present.
1615##
1616## Note: If you want to set limit on maximal length of a tag, just
1617## put the appropriate number between % and character that defines
1618## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1619##
1620## In addition, formats support markers used for text attributes.
1621## They are followed by character '$'. After that you can put:
1622##
1623## - 0 - default window color (discards all other colors)
1624## - 1 - black
1625## - 2 - red
1626## - 3 - green
1627## - 4 - yellow
1628## - 5 - blue
1629## - 6 - magenta
1630## - 7 - cyan
1631## - 8 - white
1632## - 9 - end of current color
1633## - b - bold text
1634## - u - underline text
1635## - r - reverse colors
1636## - a - use alternative character set
1637##
1638## If you don't want to use a non-color attribute anymore, just put it
1639## again, but this time insert character '/' between '$' and attribute
1640## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1641## or filename with reversed colors.
1642##
1643## If you want to use 256 colors and/or background colors in formats
1644## (the naming scheme is described below in section about color
1645## definitions), it can be done with the syntax $(COLOR), e.g. to set
1646## the artist tag to one of the non-standard colors and make it have
1647## yellow background, you need to write $(197_yellow)%a$(end). Note
1648## that for standard colors this is interchangable with attributes
1649## listed above.
1650##
1651## Note: colors can be nested.
1652##
1653#
1654#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1655#
1656#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1657#
1658#song_library_format = {%n - }{%t}|{%f}
1659#
1660#
1661#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1662#
1663#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1664#
1665#now_playing_prefix = $b
1666#
1667#now_playing_suffix = $/b
1668#
1669#browser_playlist_prefix = "$2playlist$9 "
1670#
1671#selected_item_prefix = $6
1672#
1673#selected_item_suffix = $9
1674#
1675#modified_item_prefix = $3> $9
1676#
1677##
1678## Note: attributes are not supported for the following variables.
1679##
1680#song_window_title_format = {%a - }{%t}|{%f}
1681##
1682## Note: Below variables are used for sorting songs in browser.
1683## The sort mode determines how songs are sorted, and can be used
1684## in combination with a sort format to specify a custom sorting format.
1685## Available values for browser_sort_mode are "name", "mtime", "format"
1686## and "noop".
1687##
1688#
1689#browser_sort_mode = name
1690#
1691#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1692#
1693##### columns settings #####
1694##
1695## syntax of song columns list format is "column column etc."
1696##
1697## - syntax for each column is:
1698##
1699## (width of the column)[color of the column]{displayed tag}
1700##
1701## Note: Width is by default in %, if you want a column to
1702## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1703## will be the column that take 10% of screen (so the real width
1704## will depend on actual screen size), whereas (10f)[white]{a}
1705## will take 10 terminal cells, no matter how wide the screen is.
1706##
1707## - color is optional (if you want the default one,
1708## leave the field empty).
1709##
1710## Note: You can give a column additional attributes by putting appropriate
1711## character after displayed tag character. Available attributes are:
1712##
1713## - r - column will be right aligned
1714## - E - if tag is empty, empty tag marker won't be displayed
1715##
1716## You can also:
1717##
1718## - give a column custom name by putting it after attributes,
1719## separated with character ':', e.g. {lr:Length} gives you
1720## right aligned column of lengths named "Length".
1721##
1722## - define sequence of tags, that have to be displayed in case
1723## predecessor is empty in a way similar to the one in classic
1724## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1725## creates column named "Owner" that tries to display artist
1726## tag and then composer and performer if previous ones are
1727## not available.
1728##
1729#
1730#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1731#
1732##### various settings #####
1733#
1734##
1735## Note: Custom command that will be executed each
1736## time song changes. Useful for notifications etc.
1737##
1738#execute_on_song_change = ""
1739#
1740#playlist_show_mpd_host = no
1741#
1742#playlist_show_remaining_time = no
1743#
1744#playlist_shorten_total_times = no
1745#
1746#playlist_separate_albums = no
1747#
1748##
1749## Note: Possible display modes: classic, columns.
1750##
1751#playlist_display_mode = columns
1752#
1753#browser_display_mode = classic
1754#
1755#search_engine_display_mode = classic
1756#
1757#playlist_editor_display_mode = classic
1758#
1759#discard_colors_if_item_is_selected = yes
1760#
1761#incremental_seeking = yes
1762#
1763#seek_time = 1
1764#
1765#volume_change_step = 2
1766#
1767#autocenter_mode = no
1768#
1769#centered_cursor = no
1770#
1771##
1772## Note: You can specify third character which will
1773## be used to build 'empty' part of progressbar.
1774##
1775#progressbar_look = =>
1776progressbar_look = "─╼╶"
1777#progressbar_look = "─⊙╶"
1778#
1779#progressbar_boldness = yes
1780#
1781## Available values: database, playlist.
1782##
1783#default_place_to_search_in = database
1784#
1785## Available values: classic, alternative.
1786##
1787#user_interface = classic
1788#
1789#data_fetching_delay = yes
1790#
1791## Available values: artist, album_artist, date, genre, composer, performer.
1792##
1793#media_library_primary_tag = artist
1794#
1795## Available values: wrapped, normal.
1796##
1797#default_find_mode = wrapped
1798#
1799#default_tag_editor_pattern = %n - %t
1800#
1801#header_visibility = yes
1802#
1803#statusbar_visibility = yes
1804#
1805#titles_visibility = yes
1806#
1807#header_text_scrolling = yes
1808#
1809#cyclic_scrolling = no
1810#
1811#lines_scrolled = 2
1812#
1813#follow_now_playing_lyrics = no
1814#
1815#fetch_lyrics_for_current_song_in_background = no
1816#
1817#store_lyrics_in_song_dir = no
1818#
1819#generate_win32_compatible_filenames = yes
1820#
1821#allow_for_physical_item_deletion = no
1822#
1823##
1824## Note: If you set this variable, ncmpcpp will try to
1825## get info from last.fm in language you set and if it
1826## fails, it will fall back to english. Otherwise it will
1827## use english the first time.
1828##
1829## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1830##
1831#lastfm_preferred_language = en
1832#
1833#show_hidden_files_in_local_browser = no
1834#
1835##
1836## How shall screen switcher work?
1837##
1838## - "previous" - switch between the current and previous screen.
1839## - "screen1,...,screenN" - switch between given sequence of screens.
1840##
1841## Screens available for use: help, playlist, browser, search_engine,
1842## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1843##
1844#screen_switcher_mode = playlist, browser
1845#
1846##
1847## Note: You can define startup screen
1848## by choosing screen from the list above.
1849##
1850#startup_screen = playlist
1851#
1852##
1853## Note: You can define startup slave screen
1854## by choosing screen from the list above or
1855## an empty value for no slave screen.
1856##
1857#startup_slave_screen = ""
1858#
1859#startup_slave_screen_focus = no
1860#
1861##
1862## Default width of locked screen (in %).
1863## Acceptable values are from 20 to 80.
1864##
1865#
1866#locked_screen_width_part = 50
1867#
1868#ask_for_locked_screen_width_part = yes
1869#
1870#jump_to_now_playing_song_at_start = yes
1871#
1872#ask_before_clearing_playlists = yes
1873#
1874#clock_display_seconds = no
1875#
1876#display_volume_level = yes
1877#
1878#display_bitrate = no
1879#
1880#display_remaining_time = no
1881#
1882## Available values: none, basic, extended, perl.
1883##
1884#regular_expressions = perl
1885#
1886##
1887## Note: If below is enabled, ncmpcpp will ignore leading
1888## "The" word while sorting items in browser, tags in
1889## media library, etc.
1890##
1891#ignore_leading_the = no
1892#
1893#block_search_constraints_change_if_items_found = yes
1894#
1895#mouse_support = yes
1896#
1897#mouse_list_scroll_whole_page = yes
1898#
1899#empty_tag_marker = <empty>
1900#
1901#tags_separator = " | "
1902#
1903#tag_editor_extended_numeration = no
1904#
1905#media_library_sort_by_mtime = no
1906#
1907#enable_window_title = yes
1908#
1909##
1910## Note: You can choose default search mode for search
1911## engine. Available modes are:
1912##
1913## - 1 - use mpd built-in searching (no regexes, pattern matching)
1914## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1915## but if your mpd is on a remote machine, downloading big database
1916## to process it can take a while
1917## - 3 - match only exact values (this mode uses mpd function for searching
1918## in database and local one for searching in current playlist)
1919##
1920#
1921#search_engine_default_search_mode = 1
1922#
1923#external_editor = nano
1924#
1925## Note: set to yes if external editor is a console application.
1926##
1927#use_console_editor = yes
1928#
1929##### colors definitions #####
1930##
1931## It is possible to set a background color by setting a color
1932## value "<foreground>_<background>", e.g. red_black will set
1933## foregound color to red and background color to black.
1934##
1935## In addition, for terminals that support 256 colors it
1936## is possible to set one of them by using a number in range
1937## [1, 256] instead of color name, e.g. numerical value
1938## corresponding to red_black is 2_1. To find out if the
1939## terminal supports 256 colors, run ncmpcpp and check out
1940## the bottom of the help screen for list of available colors
1941## and their numerical values.
1942##
1943## Note: due to technical limitations of ncurses, if 256 colors
1944## are used, it is possible to either use only the colors with
1945## default background color, or all pairs from 1_1 up to 254_127,
1946## depending on the ncurses version used.
1947##
1948#
1949#colors_enabled = yes
1950#
1951#empty_tag_color = cyan
1952#
1953#header_window_color = default
1954#
1955#volume_color = default
1956#
1957#state_line_color = default
1958#
1959#state_flags_color = default
1960#
1961#main_window_color = yellow
1962#
1963#color1 = white
1964#
1965#color2 = green
1966#
1967#main_window_highlight_color = yellow
1968#
1969#progressbar_color = black
1970#
1971#progressbar_elapsed_color = green
1972#
1973#statusbar_color = default
1974#
1975#alternative_ui_separator_color = black
1976#
1977#active_column_color = red
1978#
1979#window_border_color = green
1980#
1981#active_window_border = red
1982#
1983#+end_src
1984
1985*** bindings
1986:PROPERTIES:
1987:header-args+: :tangle ~/.ncmpcpp/bindings
1988:END:
1989
1990#+begin_src conf :tangle no
1991def_key "j"
1992 scroll_down
1993def_key "k"
1994 scroll_up
1995
1996def_key "ctrl-u"
1997 page_up
1998def_key "ctrl-d"
1999 page_down
2000
2001def_key "h"
2002 previous_column
2003def_key "l"
2004 next_column
2005
2006def_key "."
2007 show_lyrics
2008
2009def_key "n"
2010 next_found_item
2011def_key "N"
2012 previous_found_item
2013
2014def_key "J"
2015 move_sort_order_down
2016def_key "K"
2017 move_sort_order_up
2018#+end_src
2019
25869427
AB
2020** notmuch
2021
2022*** notmuch-config
2023:PROPERTIES:
2024:header-args+: :tangle ~/.notmuch-config
2025:END:
2026
2027#+begin_src conf
2028# .notmuch-config - Configuration file for the notmuch mail system
2029#
2030# For more information about notmuch, see https://notmuchmail.org
2031
2032# Database configuration
2033#
2034# The only value supported here is 'path' which should be the top-level
2035# directory where your mail currently exists and to where mail will be
2036# delivered in the future. Files should be individual email messages.
2037# Notmuch will store its database within a sub-directory of the path
2038# configured here named ".notmuch".
2039#
2040[database]
2041path=/home/amin/mail
2042
2043# User configuration
2044#
2045# Here is where you can let notmuch know how you would like to be
2046# addressed. Valid settings are
2047#
2048# name Your full name.
2049# primary_email Your primary email address.
2050# other_email A list (separated by ';') of other email addresses
2051# at which you receive email.
2052#
2053# Notmuch will use the various email addresses configured here when
2054# formatting replies. It will avoid including your own addresses in the
2055# recipient list of replies, and will set the From address based on the
2056# address to which the original email was addressed.
2057#
2058[user]
2059name=Amin Bandali
2060primary_email=amin@aminb.org
2a1be6b4 2061other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
25869427
AB
2062
2063# Configuration for "notmuch new"
2064#
2065# The following options are supported here:
2066#
2067# tags A list (separated by ';') of the tags that will be
2068# added to all messages incorporated by "notmuch new".
2069#
2070# ignore A list (separated by ';') of file and directory names
2071# that will not be searched for messages by "notmuch new".
2072#
2073# NOTE: *Every* file/directory that goes by one of those
2074# names will be ignored, independent of its depth/location
2075# in the mail store.
2076#
2077[new]
2078tags=new;
2079#tags=unread;inbox;
18faca55 2080ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
25869427
AB
2081
2082# Search configuration
2083#
2084# The following option is supported here:
2085#
2086# exclude_tags
2087# A ;-separated list of tags that will be excluded from
2088# search results by default. Using an excluded tag in a
2089# query will override that exclusion.
2090#
2091[search]
2092exclude_tags=deleted;spam;
2093
2094# Maildir compatibility configuration
2095#
2096# The following option is supported here:
2097#
2098# synchronize_flags Valid values are true and false.
2099#
2100# If true, then the following maildir flags (in message filenames)
2101# will be synchronized with the corresponding notmuch tags:
2102#
2103# Flag Tag
2104# ---- -------
2105# D draft
2106# F flagged
2107# P passed
2108# R replied
2109# S unread (added when 'S' flag is not present)
2110#
2111# The "notmuch new" command will notice flag changes in filenames
2112# and update tags, while the "notmuch tag" and "notmuch restore"
2113# commands will notice tag changes and update flags in filenames
2114#
2115[maildir]
2116synchronize_flags=true
2117
2118# Cryptography related configuration
2119#
2120# The following option is supported here:
2121#
2122# gpg_path
2123# binary name or full path to invoke gpg.
2124#
2125[crypto]
2126gpg_path=gpg
2127#+end_src
2128
18faca55
AB
2129*** pre-new hook
2130:PROPERTIES:
2131:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2132:END:
2133
2134#+begin_src sh
2135touch /tmp/gnusieve.log
2136sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2137 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2138#+end_src
2139
25869427
AB
2140*** post-new hook
2141:PROPERTIES:
2142:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2143:END:
2144
2145#+begin_src sh
18faca55
AB
2146# apply sent tag to messages sent by me
2147notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca
2148
2149# initial tagging
53960d74
AB
2150notmuch tag -latest -- tag:latest
2151notmuch tag +inbox +unread +latest -new -- tag:new
25869427 2152
378b4afa 2153
25869427 2154# apply tags to lists
378b4afa
AB
2155
2156# <aminb>
2157notmuch tag -inbox +lists/~sircmpwn/srht-admins -- folder:amin/lists/~sircmpwn/srht-admins
2158notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
2159notmuch tag -inbox +lists/~sircmpwn/srht-dev -- folder:amin/lists/~sircmpwn/srht-dev
2160notmuch tag -inbox +lists/~sircmpwn/srht-discuss -- folder:amin/lists/~sircmpwn/srht-discuss
2161
18faca55 2162notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
378b4afa 2163notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
ddb0b1d4
AB
2164
2165notmuch tag -inbox +pay -- folder:amin/pay
378b4afa
AB
2166# </aminb>
2167
2168# <uw>
ddb0b1d4
AB
2169notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2170notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
378b4afa
AB
2171
2172notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2173notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2174notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2175notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2176notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2177# </uw>
2178
2179# <gnu>
2180notmuch tag -inbox +lists/emacs-devel -- folder:gnu/l/emacs-devel
2181notmuch tag -inbox +lists/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2182notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2183notmuch tag -inbox +lists/fencepost-users -- folder:gnu/l/fencepost-users
2184notmuch tag -inbox +lists/guix-devel -- folder:gnu/l/guix-devel
2185notmuch tag -inbox +lists/guile-devel -- folder:gnu/l/guile-devel
2186notmuch tag -inbox +lists/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2187notmuch tag -inbox +lists/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2188notmuch tag -inbox +lists/www-commits -- folder:gnu/l/www-commits
2189notmuch tag -inbox +lists/www-discuss -- folder:gnu/l/www-discuss
2190notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2191
2192notmuch tag -inbox +lists/deepspec -- folder:gnu/l/deepspec
2193notmuch tag -inbox +lists/haskell-cafe -- folder:gnu/l/haskell-cafe
2194notmuch tag -inbox +lists/haskell-art -- folder:gnu/l/haskell-art
2195notmuch tag -inbox +lists/notmuch -- folder:gnu/l/notmuch
ddb0b1d4 2196# </gnu>
b6232163
AB
2197
2198notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2199notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
25869427
AB
2200#+end_src
2201
2202*** notmuch.service
2203:PROPERTIES:
2204:header-args+: :tangle ~/.config/systemd/user/notmuch.service
2205:END:
2206
2207#+begin_src conf :tangle no
2208[Unit]
2209Description=notmuch service
2210
2211[Service]
2212Type=oneshot
2213ExecStart=/usr/bin/notmuch new
2214StandardOutput=syslog
2215StandardError=syslog
2216#+end_src
2217
2218*** notmuch.timer
2219:PROPERTIES:
2220:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2221:END:
2222
2223#+begin_src conf :tangle no
2224[Unit]
2225Description=notmuch timer
2226
2227[Timer]
2228OnCalendar=*:0/5
2229Persistent=true
2230Unit=notmuch.service
2231
2232[Install]
2233WantedBy=timers.target
2234#+end_src
2235
2236** offlineimap
2237
2238*** offlineimaprc
2239:PROPERTIES:
2240:header-args+: :tangle ~/.offlineimaprc
2241:END:
2242
2243#+begin_src conf :tangle no
2244[general]
2245pythonfile = ~/.offlineimap.py
2246accounts = Gmail, aminb
2247maxsyncaccounts = 3
2248
2249[Account Gmail]
2250localrepository = GmailL
2251remoterepository = GmailR
2252
2253[Account aminb]
2254localrepository = aminbL
2255remoterepository = aminbR
2256
2257[Repository GmailL]
2258type = Maildir
2259localfolders = ~/Maildir/Gmail
2260
2261[Repository GmailR]
2262type = IMAP
2263remotehost = imap.gmail.com
2264remoteusereval = mailuser("gmail")
2265remotepasseval = mailpasswd("gmail")
2266sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2267ssl = yes
2268folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2269maxconnections = 1
2270realdelete = no
2271
2272[Repository aminbL]
2273type = Maildir
2274localfolders = ~/Maildir/aminb
2275
2276[Repository aminbR]
2277type = IMAP
2278remotehost = mail.aminb.org
2279remoteusereval = mailuser("aminb")
2280remotepasseval = mailpasswd("aminb")
2281sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2282ssl = yes
2283folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2284maxconnections = 1
2285realdelete = no
2286#+end_src
2287
2288*** offlineimap.py
2289:PROPERTIES:
2290:header-args+: :tangle ~/.offlineimap.py
2291:END:
2292
2293#+begin_src python :tangle no
2294import os
2295import subprocess
2296
2297def mailpasswd(acct):
2298 acct = os.path.basename(acct)
2299 path = "/home/amin/.passwd/%s.gpg" % acct
2300 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2301 try:
2302 return subprocess.check_output(args).strip()
2303 except subprocess.CalledProcessError:
2304 return ""
2305
2306def mailuser(acct):
2307 acct = os.path.basename(acct)
2308 path = "/home/amin/.passwd/%s" % acct
2309 args = ["cat", path]
2310 try:
2311 return subprocess.check_output(args).strip()
2312 except subprocess.CalledProcessError:
2313 return ""
2314
2315def prime_gpg_agent():
2316 ret = False
2317 i = 1
2318 while not ret:
2319 ret = (mailpasswd("prime") == "prime")
2320 if i > 2:
2321 from offlineimap.ui import getglobalui
2322 sys.stderr.write("Error reading in passwords. Terminating.\n")
2323 getglobalui().terminate()
2324 i += 1
2325 return ret
2326
2327prime_gpg_agent()
2328#+end_src
2329
8e15d300
AB
2330** pigeonhole
2331*** gnu.sieve
2332:PROPERTIES:
2333:header-args+: :tangle ~/sieve/gnu.sieve :comments none
2334:END:
2335
2336#+begin_src conf
2337require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2338
2339if anyof (
2340 address :is "from" "webmasters@gnu.org",
2341 address :is "from" "webmasters-comment@gnu.org") {
2342 fileinto :create "webmasters";
2343 stop;
2344}
2345
2346include :personal "lists";
2347#+end_src
2348
2349*** lists.sieve
2350:PROPERTIES:
2351:header-args+: :tangle ~/sieve/lists.sieve :comments none
2352:END:
2353
2354#+begin_src conf
2355require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2356 "include" ];
2357
2358if anyof (
2359 header :contains "list-id" "<emacs-devel.gnu.org>",
378b4afa
AB
2360 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2361 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2362 header :contains "list-id" "<fencepost-users.gnu.org>",
8e15d300
AB
2363 header :contains "list-id" "<guix-devel.gnu.org>",
2364 header :contains "list-id" "<guile-devel.gnu.org>",
2365 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2366 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2367 header :contains "list-id" "<www-commits.gnu.org>",
2368 header :contains "list-id" "<www-discuss.gnu.org>",
8e15d300
AB
2369 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2370 header :contains "list-id" "<haskell-cafe.haskell.org>",
378b4afa 2371 header :contains "list-id" "<haskell-art.we.lurk.org>",
8e15d300
AB
2372 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2373 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2374 set :lower "listname" "${1}";
2375 fileinto :create "l/${listname}";
2376 }
2377}
2378#+end_src
2379
1656853a
AB
2380** polybar
2381
2382*** config
2383:PROPERTIES:
2384:header-args+: :tangle ~/.config/polybar/config
2385:END:
2386
2387#+begin_src conf :tangle no
2388;=====================================================
2389;
2390; To learn more about how to configure Polybar
2391; go to https://github.com/jaagr/polybar
2392;
2393; The README contains alot of information
2394;
2395;=====================================================
2396
2397[colors]
2398;background = ${xrdb:color0:#222}
2399background = #222
2400background-alt = #444
2401;foreground = ${xrdb:color7:#222}
2402foreground = #eee
2403foreground-alt = #888
2404primary = #ffb52a
2405secondary = #e60053
2406alert = #bd2c40
2407
2408[bar/main]
2409;monitor = ${env:MONITOR:HDMI-1}
2410width = 100%
2411height = 27
2412;offset-x = 1%
2413;offset-y = 1%
2414radius = 3.0
2415fixed-center = true
2416
2417background = ${colors.background}
2418foreground = ${colors.foreground}
2419
2420line-size = 3
2421line-color = #f00
2422
2423border-size = 4
2424border-color = #00000000
2425
2426padding-left = 0
2427padding-right = 2
2428
2429module-margin-left = 2
2430module-margin-right = 2
2431
2432font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2433font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2434font-2 = Wuncon Siji:pixelsize=10;1
2435font-3 = FontAwesome:pixelsize=10;1
2436
2437modules-left = bspwm xwindow
2438modules-center =
2439modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2440
2441tray-position = right
2442tray-padding = 1
2443;tray-transparent = true
2444;tray-background = #0063ff
2445tray-maxsize = 18
2446
2447wm-restack = bspwm
2448
2449;override-redirect = true
2450
2451scroll-up = bspwm-desknext
2452scroll-down = bspwm-deskprev
2453
2454[module/xwindow]
2455type = internal/xwindow
2456label = %title:0:50:...%
2457
2458[module/xkeyboard]
2459type = internal/xkeyboard
2460blacklist-0 = num lock
2461
2462format-prefix = " "
2463format-prefix-foreground = ${colors.foreground-alt}
2464format-prefix-underline = ${colors.secondary}
2465
2466label-layout = %layout%
2467label-layout-underline = ${colors.secondary}
2468
2469label-indicator-padding = 2
2470label-indicator-margin = 1
2471label-indicator-background = ${colors.secondary}
2472label-indicator-underline = ${colors.secondary}
2473
2474[module/filesystem]
2475type = internal/fs
2476interval = 25
2477
2478mount-0 = /
2479
2480label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2481label-unmounted = %mountpoint% not mounted
2482label-unmounted-foreground = ${colors.foreground-alt}
2483
2484[module/bspwm]
2485type = internal/bspwm
2486
2487label-focused = %index%
2488label-focused-background = ${colors.background-alt}
2489label-focused-underline= ${colors.primary}
2490label-focused-padding = 2
2491
2492label-occupied = %index%
2493label-occupied-padding = 2
2494
2495label-urgent = %index%!
2496label-urgent-background = ${colors.alert}
2497label-urgent-padding = 2
2498
2499label-empty = %index%
2500label-empty-foreground = ${colors.foreground-alt}
2501label-empty-padding = 2
2502
2503[module/i3]
2504type = internal/i3
2505format = <label-state> <label-mode>
2506index-sort = true
2507wrapping-scroll = false
2508
2509; Only show workspaces on the same output as the bar
2510;pin-workspaces = true
2511
2512label-mode-padding = 2
2513label-mode-foreground = #000
2514label-mode-background = ${colors.primary}
2515
2516; focused = Active workspace on focused monitor
2517label-focused = %index%
2518label-focused-background = ${module/bspwm.label-focused-background}
2519label-focused-underline = ${module/bspwm.label-focused-underline}
2520label-focused-padding = ${module/bspwm.label-focused-padding}
2521
2522; unfocused = Inactive workspace on any monitor
2523label-unfocused = %index%
2524label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2525
2526; visible = Active workspace on unfocused monitor
2527label-visible = %index%
2528label-visible-background = ${self.label-focused-background}
2529label-visible-underline = ${self.label-focused-underline}
2530label-visible-padding = ${self.label-focused-padding}
2531
2532; urgent = Workspace with urgency hint set
2533label-urgent = %index%
2534label-urgent-background = ${module/bspwm.label-urgent-background}
2535label-urgent-padding = ${module/bspwm.label-urgent-padding}
2536
2537[module/mpd]
2538type = internal/mpd
2539format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2540
2541icon-prev = 
2542icon-stop = 
2543icon-play = 
2544icon-pause = 
2545icon-next = 
2546
2547label-song-maxlen = 25
2548label-song-ellipsis = true
2549
2550[module/xbacklight]
2551type = internal/xbacklight
2552
2553format = <label> <bar>
2554label = BL
2555
2556bar-width = 10
2557bar-indicator = |
2558bar-indicator-foreground = #ff
2559bar-indicator-font = 2
2560bar-fill = ─
2561bar-fill-font = 2
2562bar-fill-foreground = #9f78e1
2563bar-empty = ─
2564bar-empty-font = 2
2565bar-empty-foreground = ${colors.foreground-alt}
2566
2567[module/backlight-acpi]
2568inherit = module/xbacklight
2569type = internal/backlight
2570;card = intel_backlight
2571card = mba6x_backlight
2572
2573[module/cpu]
2574type = internal/cpu
2575interval = 2
2576format-prefix = " "
2577format-prefix-foreground = ${colors.foreground-alt}
2578format-underline = #f90000
2579label = %percentage%%
2580
2581[module/memory]
2582type = internal/memory
2583interval = 2
2584format-prefix = " "
2585format-prefix-foreground = ${colors.foreground-alt}
2586format-underline = #4bffdc
2587label = %percentage_used%%
2588
2589[module/wlan]
2590type = internal/network
2591interface =
2592interval = 3.0
2593
2594format-connected = <ramp-signal> <label-connected>
2595format-connected-underline = #9f78e1
2596label-connected = %essid%
2597
2598format-disconnected =
2599;format-disconnected = <label-disconnected>
2600;format-disconnected-underline = ${self.format-connected-underline}
2601;label-disconnected = %ifname% disconnected
2602;label-disconnected-foreground = ${colors.foreground-alt}
2603
2604ramp-signal-0 = 
2605ramp-signal-1 = 
2606ramp-signal-2 = 
2607ramp-signal-3 = 
2608ramp-signal-4 = 
2609ramp-signal-foreground = ${colors.foreground-alt}
2610
2611[module/eth]
2612type = internal/network
2613interface =
2614interval = 3.0
2615
2616format-connected-underline = #55aa55
2617format-connected-prefix = " "
2618format-connected-prefix-foreground = ${colors.foreground-alt}
2619label-connected = %local_ip%
2620
2621format-disconnected =
2622;format-disconnected = <label-disconnected>
2623;format-disconnected-underline = ${self.format-connected-underline}
2624;label-disconnected = %ifname% disconnected
2625;label-disconnected-foreground = ${colors.foreground-alt}
2626
2627[module/date]
2628type = internal/date
2629interval = 5
2630
2631date =
2632date-alt = " %Y-%m-%d"
2633
2634time = %H:%M
2635time-alt = %H:%M:%S
2636
2637format-prefix = 
2638format-prefix-foreground = ${colors.foreground-alt}
2639format-underline = #0a6cf5
2640
2641label = %date% %time%
2642
2643[module/volume]
2644type = internal/volume
2645
2646format-volume = <label-volume> <bar-volume>
2647label-volume = vol
2648label-volume-foreground = ${root.foreground}
2649
2650format-muted-prefix = " "
2651format-muted-foreground = ${colors.foreground-alt}
2652label-muted = mute
2653
2654bar-volume-width = 10
2655bar-volume-foreground-0 = #55aa55
2656bar-volume-foreground-1 = #55aa55
2657bar-volume-foreground-2 = #55aa55
2658bar-volume-foreground-3 = #55aa55
2659bar-volume-foreground-4 = #55aa55
2660bar-volume-foreground-5 = #f5a70a
2661bar-volume-foreground-6 = #ff5555
2662bar-volume-gradient = false
2663bar-volume-indicator = |
2664bar-volume-indicator-font = 2
2665bar-volume-fill = ─
2666bar-volume-fill-font = 2
2667bar-volume-empty = ─
2668bar-volume-empty-font = 2
2669bar-volume-empty-foreground = ${colors.foreground-alt}
2670
2671[module/battery]
2672type = internal/battery
2673battery = BAT0
2674adapter = ADP1
2675full-at = 64
2676
2677format-charging = <animation-charging> <label-charging>
2678format-charging-underline = #ffb52a
2679
2680format-discharging = <ramp-capacity> <label-discharging>
2681format-discharging-underline = ${self.format-charging-underline}
2682
2683format-full-prefix = " "
2684format-full-prefix-foreground = ${colors.foreground-alt}
2685format-full-underline = ${self.format-charging-underline}
2686
2687ramp-capacity-0 = 
2688ramp-capacity-1 = 
2689ramp-capacity-2 = 
2690ramp-capacity-foreground = ${colors.foreground-alt}
2691
2692animation-charging-0 = 
2693animation-charging-1 = 
2694animation-charging-2 = 
2695animation-charging-foreground = ${colors.foreground-alt}
2696animation-charging-framerate = 750
2697
2698[module/temperature]
2699type = internal/temperature
2700thermal-zone = 1
2701warn-temperature = 66
2702
2703format = <ramp> <label>
2704format-underline = #f50a4d
2705format-warn = <ramp> <label-warn>
2706format-warn-underline = ${self.format-underline}
2707
2708label = %temperature%
2709label-warn = %temperature%
2710label-warn-foreground = ${colors.secondary}
2711
2712ramp-0 = 
2713ramp-1 = 
2714ramp-2 = 
2715ramp-foreground = ${colors.foreground-alt}
2716
2717[module/powermenu]
2718type = custom/menu
2719
2720format-spacing = 1
2721
2722label-open = 
2723label-open-foreground = ${colors.secondary}
2724label-close =  cancel
2725label-close-foreground = ${colors.secondary}
2726label-separator = |
2727label-separator-foreground = ${colors.foreground-alt}
2728
2729menu-0-0 = reboot
2730menu-0-0-exec = menu-open-1
2731menu-0-1 = power off
2732menu-0-1-exec = menu-open-2
2733
2734menu-1-0 = cancel
2735menu-1-0-exec = menu-open-0
2736menu-1-1 = reboot
2737menu-1-1-exec = sudo reboot
2738
2739menu-2-0 = power off
2740menu-2-0-exec = sudo poweroff
2741menu-2-1 = cancel
2742menu-2-1-exec = menu-open-0
2743
2744[module/mail]
2745type = custom/script
2746interval = 60
2747format = <label>
2748format-prefix = " "
2749format-prefix-foreground = ${colors.foreground-alt}
2750format-underline = #0a6cf5
2751exec = notmuch count tag:unread
2752
2753[settings]
2754screenchange-reload = true
2755;compositing-background = xor
2756;compositing-background = screen
2757;compositing-foreground = source
2758;compositing-border = over
2759
2760[global/wm]
2761margin-top = 0
2762margin-bottom = 0
2763
2764; vim:ft=dosini
2765#+end_src
2766
2767*** polybar-launch
2768:PROPERTIES:
2e877d14 2769:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
1656853a
AB
2770:END:
2771
2e877d14 2772#+begin_src sh :tangle no
1656853a
AB
2773# Terminate already running bar instances
2774killall -q polybar
2775
2776# Wait until the processes have been shut down
2777while pgrep -x polybar >/dev/null; do sleep 1; done
2778
2779# Launch main bar
2780polybar main &
2781
2782echo "Bars launched..."
2783#+end_src
2784
b165a3e5
AB
2785** PowerTOP
2786:PROPERTIES:
2787:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2788:END:
2789
2790#+begin_src conf
2791[Unit]
2792Description=Powertop tunings
2793
2794[Service]
2795ExecStart=/usr/bin/powertop --auto-tune
2796RemainAfterExit=true
2797
2798[Install]
2799WantedBy=multi-user.target
2800#+end_src
2801
1656853a
AB
2802** ranger
2803
2804*** rc.conf
2805:PROPERTIES:
2806:header-args+: :tangle ~/.config/ranger/rc.conf
2807:END:
2808
2809#+begin_src conf :tangle no
2810# ===================================================================
2811# This file contains the default startup commands for ranger.
2812# To change them, it is recommended to create the file
2813# ~/.config/ranger/rc.conf and add your custom commands there.
2814#
2815# If you copy this whole file there, you may want to set the environment
2816# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2817#
2818# The purpose of this file is mainly to define keybindings and settings.
2819# For running more complex python code, please create a plugin in "plugins/" or
2820# a command in "commands.py".
2821#
2822# Each line is a command that will be run before the user interface
2823# is initialized. As a result, you can not use commands which rely
2824# on the UI such as :delete or :mark.
2825# ===================================================================
2826
2827# ===================================================================
2828# == Options
2829# ===================================================================
2830
2831# How many columns are there, and what are their relative widths?
2832set column_ratios 1,3,4
2833
2834# Which files should be hidden? (regular expression)
2835set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2836
2837# Show hidden files? You can toggle this by typing 'zh'
2838set show_hidden false
2839
2840# Ask for a confirmation when running the "delete" command?
2841# Valid values are "always" (default), "never", "multiple"
2842# With "multiple", ranger will ask only if you delete multiple files at once.
2843set confirm_on_delete multiple
2844
2845# Which script is used to generate file previews?
2846# ranger ships with scope.sh, a script that calls external programs (see
2847# README for dependencies) to preview images, archives, etc.
2848set preview_script ~/.config/ranger/scope.sh
2849
2850# Use the external preview script or display simple plain text previews?
2851set use_preview_script true
2852
2853# Open all images in this directory when running certain image viewers
2854# like feh or sxiv? You can still open selected files by marking them.
2855set open_all_images true
2856
2857# Be aware of version control systems and display information.
2858set vcs_aware false
2859
2860# State of the three backends git, hg, bzr. The possible states are
2861# disabled, local (only show local info), enabled (show local and remote
2862# information).
2863set vcs_backend_git enabled
2864set vcs_backend_hg disabled
2865set vcs_backend_bzr disabled
2866
2867# Preview images in full color with the external command "w3mimgpreview"?
2868# This requires the console web browser "w3m" and a supported terminal.
2869# It has been successfully tested with "xterm" and "urxvt" without tmux.
2870set preview_images true
2871
2872# Use a unicode "..." character to mark cut-off filenames?
2873set unicode_ellipsis false
2874
2875# Show dotfiles in the bookmark preview box?
2876set show_hidden_bookmarks true
2877
2878# Which colorscheme to use? These colorschemes are available by default:
2879# default, jungle, snow
2880set colorscheme default
2881
2882# Preview files on the rightmost column?
2883# And collapse (shrink) the last column if there is nothing to preview?
2884set preview_files true
2885set preview_directories true
2886set collapse_preview true
2887
2888# Save the console history on exit?
2889set save_console_history true
2890
2891# Draw the status bar on top of the browser window (default: bottom)
2892set status_bar_on_top false
2893
2894# Draw a progress bar in the status bar which displays the average state of all
2895# currently running tasks which support progress bars?
2896set draw_progress_bar_in_status_bar true
2897
2898# Draw borders around columns?
2899set draw_borders true
2900
2901# Display the directory name in tabs?
2902set dirname_in_tabs false
2903
2904# Enable the mouse support?
2905set mouse_enabled true
2906
2907# Display the file size in the main column or status bar?
2908set display_size_in_main_column true
2909set display_size_in_status_bar true
2910
2911# Display files tags in all columns or only in main column?
2912set display_tags_in_all_columns true
2913
2914# Set a title for the window?
2915set update_title false
2916
2917# Set the title to "ranger" in the tmux program?
2918set update_tmux_title false
2919
2920# Shorten the title if it gets long? The number defines how many
2921# directories are displayed at once, 0 turns off this feature.
2922set shorten_title 3
2923
2924# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2925set tilde_in_titlebar false
2926
2927# How many directory-changes or console-commands should be kept in history?
2928set max_history_size 20
2929set max_console_history_size 50
2930
2931# Try to keep so much space between the top/bottom border when scrolling:
2932set scroll_offset 8
2933
2934# Flush the input after each key hit? (Noticable when ranger lags)
2935set flushinput true
2936
2937# Padding on the right when there's no preview?
2938# This allows you to click into the space to run the file.
2939set padding_right true
2940
2941# Save bookmarks (used with mX and `X) instantly?
2942# This helps to synchronize bookmarks between multiple ranger
2943# instances but leads to *slight* performance loss.
2944# When false, bookmarks are saved when ranger is exited.
2945set autosave_bookmarks true
2946
2947# You can display the "real" cumulative size of directories by using the
2948# command :get_cumulative_size or typing "dc". The size is expensive to
2949# calculate and will not be updated automatically. You can choose
2950# to update it automatically though by turning on this option:
2951set autoupdate_cumulative_size false
2952
2953# Turning this on makes sense for screen readers:
2954set show_cursor false
2955
2956# One of: size, basename, mtime, type
2957set sort natural
2958
2959# Additional sorting options
2960set sort_reverse false
2961set sort_case_insensitive true
2962set sort_directories_first true
2963
2964# Enable this if key combinations with the Alt Key don't work for you.
2965# (Especially on xterm)
2966set xterm_alt_key false
2967
2968# ===================================================================
2969# == Local Options
2970# ===================================================================
2971# You can set local options that only affect a single directory.
2972
2973# Examples:
2974# setlocal path=~/downloads sort mtime
2975
2976# ===================================================================
2977# == Command Aliases in the Console
2978# ===================================================================
2979
2980alias e edit
2981alias q quit
2982alias q! quitall
2983alias qall quitall
2984alias setl setlocal
2985
2986alias filter scout -prt
2987alias find scout -aet
2988alias mark scout -mr
2989alias unmark scout -Mr
2990alias search scout -rs
2991alias search_inc scout -rts
2992alias travel scout -aefiklst
2993
2994# ===================================================================
2995# == Define keys for the browser
2996# ===================================================================
2997
2998# Basic
2999map Q quit!
3000map q quit
3001copymap q ZZ ZQ
3002
3003map R reload_cwd
3004map <C-r> reset
3005map <C-l> redraw_window
3006map <C-c> abort
3007map <esc> change_mode normal
3008
3009map i display_file
3010map ? help
3011map W display_log
3012map w taskview_open
3013map S shell $SHELL
3014
3015map : console
3016map ; console
3017map ! console shell
3018map @ console -p6 shell %%s
3019map # console shell -p
3020map s console shell
3021map r chain draw_possible_programs; console open_with
3022map f console find
3023map cd console cd
3024
3025# Tagging / Marking
3026map t tag_toggle
3027map ut tag_remove
3028map "<any> tag_toggle tag=%any
3029map <Space> mark_files toggle=True
3030map v mark_files all=True toggle=True
3031map uv mark_files all=True val=False
3032map V toggle_visual_mode
3033map uV toggle_visual_mode reverse=True
3034
3035# For the nostalgics: Midnight Commander bindings
3036map <F1> help
3037map <F3> display_file
3038map <F4> edit
3039map <F5> copy
3040map <F6> cut
3041map <F7> console mkdir
3042map <F8> console delete
3043map <F10> exit
3044
3045# In case you work on a keyboard with dvorak layout
3046map <UP> move up=1
3047map <DOWN> move down=1
3048map <LEFT> move left=1
3049map <RIGHT> move right=1
3050map <HOME> move to=0
3051map <END> move to=-1
3052map <PAGEDOWN> move down=1 pages=True
3053map <PAGEUP> move up=1 pages=True
3054map <CR> move right=1
3055map <DELETE> console delete
3056map <INSERT> console touch
3057
3058# VIM-like
3059copymap <UP> k
3060copymap <DOWN> j
3061copymap <LEFT> h
3062copymap <RIGHT> l
3063copymap <HOME> gg
3064copymap <END> G
3065copymap <PAGEDOWN> <C-F>
3066copymap <PAGEUP> <C-B>
3067
3068map J move down=0.5 pages=True
3069map K move up=0.5 pages=True
3070copymap J <C-D>
3071copymap K <C-U>
3072
3073# Jumping around
3074map H history_go -1
3075map L history_go 1
3076map ] move_parent 1
3077map [ move_parent -1
3078map } traverse
3079
3080map gh cd ~
3081map ge cd /etc
3082map gu cd /usr
3083map gd cd /dev
3084map gl cd -r .
3085map gL cd -r %f
3086map go cd /opt
3087map gv cd /var
3088map gm cd /media
3089map gM cd /mnt
3090map gs cd /srv
3091map gr cd /
3092map gR eval fm.cd(ranger.RANGERDIR)
3093map g/ cd /
3094map g? cd /usr/share/doc/ranger
3095
3096# External Programs
3097map E edit
3098map du shell -p du --max-depth=1 -h --apparent-size
3099map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3100map yp shell -d echo -n %d/%f | xsel -i
3101map yd shell -d echo -n %d | xsel -i
3102map yn shell -d echo -n %f | xsel -i
3103
3104# Filesystem Operations
3105map = chmod
3106
3107map cw console rename
3108map A eval fm.open_console('rename ' + fm.thisfile.basename)
3109map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3110
3111map pp paste
3112map po paste overwrite=True
3113map pl paste_symlink relative=False
3114map pL paste_symlink relative=True
3115map phl paste_hardlink
3116map pht paste_hardlinked_subtree
3117
3118map dd cut
3119map ud uncut
3120map da cut mode=add
3121map dr cut mode=remove
3122
3123map yy copy
3124map uy uncut
3125map ya copy mode=add
3126map yr copy mode=remove
3127
3128# Temporary workarounds
3129map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3130map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3131map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3132map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3133map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3134map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3135map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3136map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3137
3138# Searching
3139map / console search
3140map n search_next
3141map N search_next forward=False
3142map ct search_next order=tag
3143map cs search_next order=size
3144map ci search_next order=mimetype
3145map cc search_next order=ctime
3146map cm search_next order=mtime
3147map ca search_next order=atime
3148
3149# Tabs
3150map <C-n> tab_new ~
3151map <C-w> tab_close
3152map <TAB> tab_move 1
3153map <S-TAB> tab_move -1
3154map <A-Right> tab_move 1
3155map <A-Left> tab_move -1
3156map gt tab_move 1
3157map gT tab_move -1
3158map gn tab_new ~
3159map gc tab_close
3160map uq tab_restore
3161map <a-1> tab_open 1
3162map <a-2> tab_open 2
3163map <a-3> tab_open 3
3164map <a-4> tab_open 4
3165map <a-5> tab_open 5
3166map <a-6> tab_open 6
3167map <a-7> tab_open 7
3168map <a-8> tab_open 8
3169map <a-9> tab_open 9
3170
3171# Sorting
3172map or toggle_option sort_reverse
3173map os chain set sort=size; set sort_reverse=False
3174map ob chain set sort=basename; set sort_reverse=False
3175map on chain set sort=natural; set sort_reverse=False
3176map om chain set sort=mtime; set sort_reverse=False
3177map oc chain set sort=ctime; set sort_reverse=False
3178map oa chain set sort=atime; set sort_reverse=False
3179map ot chain set sort=type; set sort_reverse=False
3180
3181map oS chain set sort=size; set sort_reverse=True
3182map oB chain set sort=basename; set sort_reverse=True
3183map oN chain set sort=natural; set sort_reverse=True
3184map oM chain set sort=mtime; set sort_reverse=True
3185map oC chain set sort=ctime; set sort_reverse=True
3186map oA chain set sort=atime; set sort_reverse=True
3187map oT chain set sort=type; set sort_reverse=True
3188
3189map dc get_cumulative_size
3190
3191# Settings
3192map zc toggle_option collapse_preview
3193map zd toggle_option sort_directories_first
3194map zh toggle_option show_hidden
3195map <C-h> toggle_option show_hidden
3196map zi toggle_option flushinput
3197map zm toggle_option mouse_enabled
3198map zp toggle_option preview_files
3199map zP toggle_option preview_directories
3200map zs toggle_option sort_case_insensitive
3201map zu toggle_option autoupdate_cumulative_size
3202map zv toggle_option use_preview_script
3203map zf console filter
3204
3205# Bookmarks
3206map `<any> enter_bookmark %any
3207map '<any> enter_bookmark %any
3208map m<any> set_bookmark %any
3209map um<any> unset_bookmark %any
3210
3211map m<bg> draw_bookmarks
3212copymap m<bg> um<bg> `<bg> '<bg>
3213
3214# Generate all the chmod bindings with some python help:
3215eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3216eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3217eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3218eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3219eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3220
3221eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3222eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3223eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3224eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3225eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3226
3227# ===================================================================
3228# == Define keys for the console
3229# ===================================================================
3230# Note: Unmapped keys are passed directly to the console.
3231
3232# Basic
3233cmap <tab> eval fm.ui.console.tab()
3234cmap <s-tab> eval fm.ui.console.tab(-1)
3235cmap <ESC> eval fm.ui.console.close()
3236cmap <CR> eval fm.ui.console.execute()
3237cmap <C-l> redraw_window
3238
3239copycmap <ESC> <C-c>
3240copycmap <CR> <C-j>
3241
3242# Move around
3243cmap <up> eval fm.ui.console.history_move(-1)
3244cmap <down> eval fm.ui.console.history_move(1)
3245cmap <left> eval fm.ui.console.move(left=1)
3246cmap <right> eval fm.ui.console.move(right=1)
3247cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3248cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3249
3250# Line Editing
3251cmap <backspace> eval fm.ui.console.delete(-1)
3252cmap <delete> eval fm.ui.console.delete(0)
3253cmap <C-w> eval fm.ui.console.delete_word()
3254cmap <C-k> eval fm.ui.console.delete_rest(1)
3255cmap <C-u> eval fm.ui.console.delete_rest(-1)
3256cmap <C-y> eval fm.ui.console.paste()
3257
3258# And of course the emacs way
3259copycmap <up> <C-p>
3260copycmap <down> <C-n>
3261copycmap <left> <C-b>
3262copycmap <right> <C-f>
3263copycmap <home> <C-a>
3264copycmap <end> <C-e>
3265copycmap <delete> <C-d>
3266copycmap <backspace> <C-h>
3267
3268# Note: There are multiple ways to express backspaces. <backspace> (code 263)
3269# and <backspace2> (code 127). To be sure, use both.
3270copycmap <backspace> <backspace2>
3271
3272# This special expression allows typing in numerals:
3273cmap <allow_quantifiers> false
3274
3275# ===================================================================
3276# == Pager Keybindings
3277# ===================================================================
3278
3279# Movement
3280pmap <down> pager_move down=1
3281pmap <up> pager_move up=1
3282pmap <left> pager_move left=4
3283pmap <right> pager_move right=4
3284pmap <home> pager_move to=0
3285pmap <end> pager_move to=-1
3286pmap <pagedown> pager_move down=1.0 pages=True
3287pmap <pageup> pager_move up=1.0 pages=True
3288pmap <C-d> pager_move down=0.5 pages=True
3289pmap <C-u> pager_move up=0.5 pages=True
3290
3291copypmap <UP> k <C-p>
3292copypmap <DOWN> j <C-n> <CR>
3293copypmap <LEFT> h
3294copypmap <RIGHT> l
3295copypmap <HOME> g
3296copypmap <END> G
3297copypmap <C-d> d
3298copypmap <C-u> u
3299copypmap <PAGEDOWN> n f <C-F> <Space>
3300copypmap <PAGEUP> p b <C-B>
3301
3302# Basic
3303pmap <ESC> pager_close
3304copypmap <ESC> q Q i <F3>
3305pmap E edit_file
3306
3307# ===================================================================
3308# == Taskview Keybindings
3309# ===================================================================
3310
3311# Movement
3312tmap <up> taskview_move up=1
3313tmap <down> taskview_move down=1
3314tmap <home> taskview_move to=0
3315tmap <end> taskview_move to=-1
3316tmap <pagedown> taskview_move down=1.0 pages=True
3317tmap <pageup> taskview_move up=1.0 pages=True
3318tmap <C-d> taskview_move down=0.5 pages=True
3319tmap <C-u> taskview_move up=0.5 pages=True
3320
3321copytmap <UP> k <C-p>
3322copytmap <DOWN> j <C-n> <CR>
3323copytmap <HOME> g
3324copytmap <END> G
3325copytmap <C-u> u
3326copytmap <PAGEDOWN> n f <C-F> <Space>
3327copytmap <PAGEUP> p b <C-B>
3328
3329# Changing priority and deleting tasks
3330tmap J eval -q fm.ui.taskview.task_move(-1)
3331tmap K eval -q fm.ui.taskview.task_move(0)
3332tmap dd eval -q fm.ui.taskview.task_remove()
3333tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3334tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3335tmap <delete> eval -q fm.ui.taskview.task_remove()
3336
3337# Basic
3338tmap <ESC> taskview_close
3339copytmap <ESC> q Q w <C-c>
3340#+end_src
3341
3342*** scope.sh
3343:PROPERTIES:
2e877d14 3344:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
1656853a
AB
3345:END:
3346
2e877d14 3347#+begin_src sh :tangle no
1656853a
AB
3348# ranger supports enhanced previews. If the option "use_preview_script"
3349# is set to True and this file exists, this script will be called and its
3350# output is displayed in ranger. ANSI color codes are supported.
3351
3352# NOTES: This script is considered a configuration file. If you upgrade
3353# ranger, it will be left untouched. (You must update it yourself.)
3354# Also, ranger disables STDIN here, so interactive scripts won't work properly
3355
3356# Meanings of exit codes:
3357# code | meaning | action of ranger
3358# -----+------------+-------------------------------------------
3359# 0 | success | success. display stdout as preview
3360# 1 | no preview | failure. display no preview at all
3361# 2 | plain text | display the plain content of the file
3362# 3 | fix width | success. Don't reload when width changes
3363# 4 | fix height | success. Don't reload when height changes
3364# 5 | fix both | success. Don't ever reload
3365
3366# Meaningful aliases for arguments:
3367path="$1" # Full path of the selected file
3368width="$2" # Width of the preview pane (number of fitting characters)
3369height="$3" # Height of the preview pane (number of fitting characters)
3370
3371maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3372
3373# Find out something about the file:
3374mimetype=$(file --mime-type -Lb "$path")
3375extension=${path##*.}
3376
3377# Functions:
3378# runs a command and saves its output into $output. Useful if you need
3379# the return value AND want to use the output in a pipe
3380try() { output=$(eval '"$@"'); }
3381
3382# writes the output of the previouosly used "try" command
3383dump() { echo "$output"; }
3384
3385# a common post-processing function used after most commands
3386trim() { head -n "$maxln"; }
3387
3388# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3389highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3390
3391case "$extension" in
3392 # Archive extensions:
3393 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3394 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3395 try als "$path" && { dump | trim; exit 0; }
3396 try acat "$path" && { dump | trim; exit 3; }
3397 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3398 exit 1;;
3399 rar)
3400 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3401 # PDF documents:
3402 pdf)
3403 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3404 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3405 # BitTorrent Files
3406 torrent)
3407 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3408 # HTML Pages:
3409 htm|html|xhtml)
3410 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3411 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3412 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3413 ;; # fall back to highlight/cat if the text browsers fail
3414esac
3415
3416case "$mimetype" in
3417 # Syntax highlight for text files:
3418 text/* | */xml)
3419 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3420 # Ascii-previews of images:
3421 image/*)
3422 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3423 # Display information about media files:
3424 video/* | audio/*)
3425 exiftool "$path" && exit 5
3426 # Use sed to remove spaces so the output fits into the narrow window
3427 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3428esac
3429
3430exit 1
3431#+end_src
3432
2f1dcf9d
AB
3433** redshift
3434:PROPERTIES:
e2149232 3435:header-args+: :tangle ~/.config/redshift.conf :comments none
2f1dcf9d
AB
3436:END:
3437
3438#+begin_src conf
3439; Global settings for redshift
3440[redshift]
3441; Set the day and night screen temperatures (Neutral is 6500K)
3442;temp-day=5700
3443;temp-night=3500
3444
3445;temp-day=6500
3446temp-day=6200
3447;temp-night=4800
3448;temp-night=5000
3449;temp-night=4500
3450temp-night=4000
3451
3452; Enable/Disable a smooth transition between day and night
3453; 0 will cause a direct change from day to night screen temperature.
3454; 1 will gradually increase or decrease the screen temperature.
3455transition=1
3456
3457; Set the screen brightness. Default is 1.0.
3458;brightness=0.9
3459; It is also possible to use different settings for day and night
3460; since version 1.8.
3461;brightness-day=0.7
3462;brightness-night=0.4
3463; Set the screen gamma (for all colors, or each color channel
3464; individually)
3465;gamma=0.8
3466;gamma=1.0
3467;gamma=0.8:0.7:0.8
3468; This can also be set individually for day and night since
3469; version 1.10.
3470;gamma-day=0.8:0.7:0.8
3471;gamma-night=0.6
3472
3473; Set the location-provider: 'geoclue2' or 'manual'
3474; type 'redshift -l list' to see possible values.
3475; The location provider settings are in a different section.
3476;location-provider=manual
3477location-provider=geoclue2
3478
3479; Set the adjustment-method: 'randr', 'vidmode'
3480; type 'redshift -m list' to see all possible values.
3481; 'randr' is the preferred method, 'vidmode' is an older API.
3482; but works in some cases when 'randr' does not.
3483; The adjustment method settings are in a different section.
3484adjustment-method=randr
3485
3486; Configuration of the location-provider:
3487; type 'redshift -l PROVIDER:help' to see the settings.
3488; ex: 'redshift -l manual:help'
3489; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3490; are negative numbers.
3491;[manual]
3492;lat=48.1
3493;lon=11.6
3494
3495; Configuration of the adjustment-method
3496; type 'redshift -m METHOD:help' to see the settings.
3497; ex: 'redshift -m randr:help'
3498; In this example, randr is configured to adjust screen 1.
3499; Note that the numbering starts from 0, so this is actually the
3500; second screen. If this option is not specified, Redshift will try
3501; to adjust _all_ screens.
3502;[randr]
3503;screen=1
3504#+end_src
3505
3506** rofi
3507:PROPERTIES:
3508:header-args+: :tangle ~/.config/rofi/config
3509:END:
3510
3511#+begin_src conf
3512rofi.font: Ubuntu Mono 13
3513! rofi.font: Inconsolata 16
3514! rofi.font: Iosevka 13
3515! rofi.font: Source Code Pro 11
3516rofi.modi: run,window
3517! rofi.width: 640
3518rofi.width: 600
3519!rofi.location: 2
3520!rofi.yoffset: 200
3521rofi.monitor: -1
3522!rofi.lines: 10
3523
3524!rofi.theme: /usr/share/rofi/themes//Arc.rasi
3525!rofi.theme: /usr/share/rofi/themes//Paper.rasi
3526!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3527
3528rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3529#+end_src
3530
3531** rofi-pass
3532:PROPERTIES:
3533:header-args+: :tangle ~/.config/rofi-pass/config
3534:END:
3535
3536#+begin_src conf
3537# permanently set alternative root dir
3538# root=/path/to/root
3539
3540# rofi command. Make sure to have "$@" as last argument
3541_rofi () {
3542 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
61f337f4 3543 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
2f1dcf9d
AB
3544}
3545
3546# xdotool needs the keyboard layout to be set using setxkbmap
3547# You can do this in your autostart scripts (e.g. xinitrc)
3548
3549# If for some reason, you cannot do this, you can set the command here.
3550# and set fix_layout to true
3551fix_layout=false
3552
3553layout_cmd () {
3554 setxkbmap us
3555}
3556
3557# fields to be used
3558URL_field='url'
3559USERNAME_field='user'
3560AUTOTYPE_field='autotype'
3561
3562# delay to be used for :delay keyword
3563delay=2
3564
3565## Programs to be used
3566# Editor
3567EDITOR='gvim -f'
3568
3569# Browser
3570BROWSER='chromium'
3571
3572## Misc settings
3573
3574default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3575auto_enter='false'
3576notify='false'
3577default_autotype='user :tab pass'
3578
3579# color of the help messages
3580# leave empty for autodetection
3581help_color="#4872FF"
3582
3583# Clipboard settings
3584# Possible options: primary, clipboard, both
3585clip=primary
3586
3587# Options for generating new password entries
3588# default_user is also used for password files that have no user field.
3589default_user=aminb
3590default_user2=aminban
3591password_length=30
3592
3593# Custom Keybindings
3594#autotype="Alt+1"
3595autotype="Alt+m"
3596type_user="Alt+2"
3597type_pass="Alt+3"
3598open_url="Alt+4"
3599copy_name="Alt+u"
3600copy_url="Alt+l"
3601copy_pass="Alt+p"
3602show="Alt+o"
3603copy_entry="Alt+2"
3604type_entry="Alt+1"
3605copy_menu="Alt+c"
3606action_menu="Alt+a"
3607type_menu="Alt+t"
3608help="Alt+h"
3609switch="Alt+x"
3610insert_pass="Alt+n"
3611#+end_src
3612
fb52d1f9
AB
3613** sway
3614:PROPERTIES:
3615:header-args+: :tangle ~/.config/sway/config
3616:END:
3617
3618#+begin_src conf
3619# Default config for sway
3620#
3621# Copy this to ~/.config/sway/config and edit it to your liking.
3622#
3623# Read `man 5 sway` for a complete reference.
3624
3625### Variables
3626#
3627# Logo key. Use Mod1 for Alt.
3628set $mod Mod4
3629# Home row direction keys, like vim
3630set $left h
3631set $down j
3632set $up k
3633set $right l
3634# Your preferred terminal emulator
3635set $term urxvt
3636# Your preferred application launcher
3637set $menu dmenu_run
3638
3639### Output configuration
3640#
3641# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3642output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3643#
3644# Example configuration:
3645#
3646# output HDMI-A-1 resolution 1920x1080 position 1920,0
3647#
3648# You can get the names of your outputs by running: swaymsg -t get_outputs
3649
3650### Idle configuration
3651#
3652# Example configuration:
3653#
3654#exec swayidle \
3655# timeout 300 'swaylock -c 000000' \
3656# timeout 600 'swaymsg "output * dpms off"' \
3657# resume 'swaymsg "output * dpms on"' \
3658# before-sleep 'swaylock -c 000000'
3659#
3660# This will lock your screen after 300 seconds of inactivity, then turn off
3661# your displays after another 600 seconds, and turn your screens back on when
3662# resumed. It will also lock your screen before your computer goes to sleep.
3663
3664### Input configuration
3665#
3666# Example configuration:
3667#
3668# input "2:14:SynPS/2_Synaptics_TouchPad" {
3669# dwt enabled
3670# tap enabled
3671# natural_scroll enabled
3672# middle_emulation enabled
3673# }
3674#
3675# You can get the names of your inputs by running: swaymsg -t get_inputs
3676# Read `man 5 sway-input` for more information about this section.
3677
3678### Key bindings
3679#
3680# Basics:
3681#
3682 # start a terminal
3683 bindsym $mod+Return exec $term
3684
3685 # kill focused window
3686 bindsym $mod+Shift+q kill
3687
3688 # start your launcher
3689 bindsym $mod+d exec $menu
3690
3691 # Drag floating windows by holding down $mod and left mouse button.
3692 # Resize them with right mouse button + $mod.
3693 # Despite the name, also works for non-floating windows.
3694 # Change normal to inverse to use left mouse button for resizing and right
3695 # mouse button for dragging.
3696 floating_modifier $mod normal
3697
3698 # reload the configuration file
3699 bindsym $mod+Shift+c reload
3700
3701 # exit sway (logs you out of your wayland session)
3702 bindsym $mod+Shift+e exit
3703#
3704# Moving around:
3705#
3706 # Move your focus around
3707 bindsym $mod+$left focus left
3708 bindsym $mod+$down focus down
3709 bindsym $mod+$up focus up
3710 bindsym $mod+$right focus right
3711 # or use $mod+[up|down|left|right]
3712 bindsym $mod+Left focus left
3713 bindsym $mod+Down focus down
3714 bindsym $mod+Up focus up
3715 bindsym $mod+Right focus right
3716
3717 # _move_ the focused window with the same, but add Shift
3718 bindsym $mod+Shift+$left move left
3719 bindsym $mod+Shift+$down move down
3720 bindsym $mod+Shift+$up move up
3721 bindsym $mod+Shift+$right move right
3722 # ditto, with arrow keys
3723 bindsym $mod+Shift+Left move left
3724 bindsym $mod+Shift+Down move down
3725 bindsym $mod+Shift+Up move up
3726 bindsym $mod+Shift+Right move right
3727#
3728# Workspaces:
3729#
3730 # switch to workspace
3731 bindsym $mod+1 workspace 1
3732 bindsym $mod+2 workspace 2
3733 bindsym $mod+3 workspace 3
3734 bindsym $mod+4 workspace 4
3735 bindsym $mod+5 workspace 5
3736 bindsym $mod+6 workspace 6
3737 bindsym $mod+7 workspace 7
3738 bindsym $mod+8 workspace 8
3739 bindsym $mod+9 workspace 9
3740 bindsym $mod+0 workspace 10
3741 # move focused container to workspace
3742 bindsym $mod+Shift+1 move container to workspace 1
3743 bindsym $mod+Shift+2 move container to workspace 2
3744 bindsym $mod+Shift+3 move container to workspace 3
3745 bindsym $mod+Shift+4 move container to workspace 4
3746 bindsym $mod+Shift+5 move container to workspace 5
3747 bindsym $mod+Shift+6 move container to workspace 6
3748 bindsym $mod+Shift+7 move container to workspace 7
3749 bindsym $mod+Shift+8 move container to workspace 8
3750 bindsym $mod+Shift+9 move container to workspace 9
3751 bindsym $mod+Shift+0 move container to workspace 10
3752 # Note: workspaces can have any name you want, not just numbers.
3753 # We just use 1-10 as the default.
3754#
3755# Layout stuff:
3756#
3757 # You can "split" the current object of your focus with
3758 # $mod+b or $mod+v, for horizontal and vertical splits
3759 # respectively.
3760 bindsym $mod+b splith
3761 bindsym $mod+v splitv
3762
3763 # Switch the current container between different layout styles
3764 bindsym $mod+s layout stacking
3765 bindsym $mod+w layout tabbed
3766 bindsym $mod+e layout toggle split
3767
3768 # Make the current focus fullscreen
3769 bindsym $mod+f fullscreen
3770
3771 # Toggle the current focus between tiling and floating mode
3772 bindsym $mod+Shift+space floating toggle
3773
3774 # Swap focus between the tiling area and the floating area
3775 bindsym $mod+space focus mode_toggle
3776
3777 # move focus to the parent container
3778 bindsym $mod+a focus parent
3779#
3780# Scratchpad:
3781#
3782 # Sway has a "scratchpad", which is a bag of holding for windows.
3783 # You can send windows there and get them back later.
3784
3785 # Move the currently focused window to the scratchpad
3786 bindsym $mod+Shift+minus move scratchpad
3787
3788 # Show the next scratchpad window or hide the focused scratchpad window.
3789 # If there are multiple scratchpad windows, this command cycles through them.
3790 bindsym $mod+minus scratchpad show
3791#
3792# Resizing containers:
3793#
3794mode "resize" {
3795 # left will shrink the containers width
3796 # right will grow the containers width
3797 # up will shrink the containers height
3798 # down will grow the containers height
3799 bindsym $left resize shrink width 10px
3800 bindsym $down resize grow height 10px
3801 bindsym $up resize shrink height 10px
3802 bindsym $right resize grow width 10px
3803
3804 # ditto, with arrow keys
3805 bindsym Left resize shrink width 10px
3806 bindsym Down resize grow height 10px
3807 bindsym Up resize shrink height 10px
3808 bindsym Right resize grow width 10px
3809
3810 # return to default mode
3811 bindsym Return mode "default"
3812 bindsym Escape mode "default"
3813}
3814bindsym $mod+r mode "resize"
3815
3816#
3817# Status Bar:
3818#
3819# Read `man 5 sway-bar` for more information about this section.
3820bar {
3821 position top
3822 colors {
3823 statusline #ffffff
3824 background #323232
3825 inactive_workspace #32323200 #32323200 #5c5c5c
3826 }
3827}
3828
3829include /etc/sway/config.d/*
3830#+end_src
3831
08e87a0a
AB
3832** TLP
3833
3834*** TODO enigma
3835*** plasma
3836
3837#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3838# ------------------------------------------------------------------------------
3839# tlp - Parameters for power saving
3840# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3841
3842# Hint: some features are disabled by default, remove the leading # to enable
3843# them.
3844
3845# Set to 0 to disable, 1 to enable TLP.
3846TLP_ENABLE=1
3847
3848# Operation mode when no power supply can be detected: AC, BAT.
3849# Concerns some desktop and embedded hardware only.
3850TLP_DEFAULT_MODE=AC
3851
3852# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3853# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3854TLP_PERSISTENT_DEFAULT=0
3855
3856# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3857# Non-zero value enables, zero disables laptop mode.
3858DISK_IDLE_SECS_ON_AC=0
3859DISK_IDLE_SECS_ON_BAT=2
3860
3861# Dirty page values (timeouts in secs).
3862MAX_LOST_WORK_SECS_ON_AC=15
3863MAX_LOST_WORK_SECS_ON_BAT=60
3864
3865# Hint: CPU parameters below are disabled by default, remove the leading #
3866# to enable them, otherwise kernel default values are used.
3867
3868# Select a CPU frequency scaling governor.
3869# Intel Core i processor with intel_pstate driver:
3870# powersave(*), performance.
3871# Older hardware with acpi-cpufreq driver:
3872# ondemand(*), powersave, performance, conservative, schedutil.
3873# (*) is recommended.
3874# Hint: use tlp-stat -p to show the active driver and available governors.
3875# Important:
3876# powersave for intel_pstate and ondemand for acpi-cpufreq are power
3877# efficient for *almost all* workloads and therefore kernel and most
3878# distributions have chosen them as defaults. If you still want to change,
3879# you should know what you're doing! You *must* disable your distribution's
3880# governor settings or conflicts will occur.
3881#CPU_SCALING_GOVERNOR_ON_AC=powersave
3882#CPU_SCALING_GOVERNOR_ON_BAT=powersave
3883
3884# Set the min/max frequency available for the scaling governor.
3885# Possible values strongly depend on your CPU. For available frequencies see
3886# the output of tlp-stat -p.
3887#CPU_SCALING_MIN_FREQ_ON_AC=0
3888#CPU_SCALING_MAX_FREQ_ON_AC=0
3889#CPU_SCALING_MIN_FREQ_ON_BAT=0
3890#CPU_SCALING_MAX_FREQ_ON_BAT=0
3891
3892# Set energy performance hints (HWP) for Intel P-state governor:
3893# performance, balance_performance, default, balance_power, power
3894# Values are given in order of increasing power saving.
3895# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3896CPU_HWP_ON_AC=balance_performance
3897CPU_HWP_ON_BAT=balance_power
3898
3899# Set Intel P-state performance: 0..100 (%).
3900# Limit the max/min P-state to control the power dissipation of the CPU.
3901# Values are stated as a percentage of the available performance.
3902# Requires an Intel Core i processor with intel_pstate driver.
3903#CPU_MIN_PERF_ON_AC=0
3904#CPU_MAX_PERF_ON_AC=100
3905#CPU_MIN_PERF_ON_BAT=0
3906#CPU_MAX_PERF_ON_BAT=30
3907
3908# Set the CPU "turbo boost" feature: 0=disable, 1=allow
3909# Requires an Intel Core i processor.
3910# Important:
3911# - This may conflict with your distribution's governor settings
3912# - A value of 1 does *not* activate boosting, it just allows it
3913#CPU_BOOST_ON_AC=1
3914#CPU_BOOST_ON_BAT=0
3915
3916# Minimize number of used CPU cores/hyper-threads under light load conditions:
3917# 0=disable, 1=enable.
3918SCHED_POWERSAVE_ON_AC=0
3919SCHED_POWERSAVE_ON_BAT=1
3920
3921# Kernel NMI Watchdog:
3922# 0=disable (default, saves power), 1=enable (for kernel debugging only).
3923NMI_WATCHDOG=0
3924
3925# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3926# Frequency voltage pairs are written to:
3927# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3928# CAUTION: only use this, if you thoroughly understand what you are doing!
3929#PHC_CONTROLS="F:V F:V F:V F:V"
3930
3931# Set CPU performance versus energy savings policy:
3932# performance, balance-performance, default, balance-power, power.
3933# Values are given in order of increasing power saving.
3934# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3935ENERGY_PERF_POLICY_ON_AC=performance
3936ENERGY_PERF_POLICY_ON_BAT=balance-power
3937
3938# Disk devices; separate multiple devices with spaces (default: sda).
3939# Devices can be specified by disk ID also (lookup with: tlp diskid).
3940DISK_DEVICES="sda sdb"
3941
3942# Disk advanced power management level: 1..254, 255 (max saving, min, off).
3943# Levels 1..127 may spin down the disk; 255 allowable on most drives.
3944# Separate values for multiple disks with spaces. Use the special value 'keep'
3945# to keep the hardware default for the particular disk.
3946DISK_APM_LEVEL_ON_AC="254 254"
3947DISK_APM_LEVEL_ON_BAT="128 128"
3948
3949# Hard disk spin down timeout:
3950# 0: spin down disabled
3951# 1..240: timeouts from 5s to 20min (in units of 5s)
3952# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3953# See 'man hdparm' for details.
3954# Separate values for multiple disks with spaces. Use the special value 'keep'
3955# to keep the hardware default for the particular disk.
3956#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3957#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3958
3959# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3960# Separate values for multiple disks with spaces. Use the special value 'keep'
3961# to keep the kernel default scheduler for the particular disk.
3962#DISK_IOSCHED="cfq cfq"
3963
3964# AHCI link power management (ALPM) for disk devices:
3965# min_power, med_power_with_dipm(*), medium_power, max_performance.
3966# (*) Kernel >= 4.15 required, then recommended.
3967# Multiple values separated with spaces are tried sequentially until success.
3968SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3969SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3970
3971# Exclude host devices from AHCI link power management.
3972# Separate multiple hosts with spaces.
3973#SATA_LINKPWR_BLACKLIST="host1"
3974
3975# Runtime Power Management for AHCI host and disks devices:
3976# on=disable, auto=enable.
3977# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3978#AHCI_RUNTIME_PM_ON_AC=on
3979#AHCI_RUNTIME_PM_ON_BAT=on
3980
3981# Seconds of inactivity before disk is suspended.
3982AHCI_RUNTIME_PM_TIMEOUT=15
3983
3984# PCI Express Active State Power Management (PCIe ASPM):
3985# default, performance, powersave.
3986PCIE_ASPM_ON_AC=performance
3987PCIE_ASPM_ON_BAT=powersave
3988
3989# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3990# auto = mid on BAT, high on AC; default = use hardware defaults.
3991RADEON_POWER_PROFILE_ON_AC=high
3992RADEON_POWER_PROFILE_ON_BAT=low
3993
3994# Radeon dynamic power management method (DPM): battery, performance.
3995RADEON_DPM_STATE_ON_AC=performance
3996RADEON_DPM_STATE_ON_BAT=battery
3997
3998# Radeon DPM performance level: auto, low, high; auto is recommended.
3999RADEON_DPM_PERF_LEVEL_ON_AC=auto
4000RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4001
4002# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4003WIFI_PWR_ON_AC=off
4004WIFI_PWR_ON_BAT=on
4005
4006# Disable wake on LAN: Y/N.
4007WOL_DISABLE=Y
4008
4009# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4010# A value of 0 disables, >=1 enables power saving (recommended: 1).
4011SOUND_POWER_SAVE_ON_AC=0
4012SOUND_POWER_SAVE_ON_BAT=0
4013
4014# Disable controller too (HDA only): Y/N.
4015SOUND_POWER_SAVE_CONTROLLER=N
4016
4017# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4018# Drive can be powered on again by releasing (and reinserting) the eject lever
4019# or by pressing the disc eject button on newer models.
4020# Note: an UltraBay/MediaBay hard disk is never powered off.
4021BAY_POWEROFF_ON_AC=0
4022BAY_POWEROFF_ON_BAT=0
4023# Optical drive device to power off (default sr0).
4024BAY_DEVICE="sr0"
4025
4026# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4027RUNTIME_PM_ON_AC=on
4028RUNTIME_PM_ON_BAT=auto
4029
4030# Exclude PCI(e) device adresses the following list from Runtime PM
4031# (separate with spaces). Use lspci to get the adresses (1st column).
4032#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4033RUNTIME_PM_BLACKLIST="01:00.0"
4034
4035# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4036# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4037# prevents accidential power-on of dGPU in hybrid graphics setups.
4038# Use "" to disable the feature completely.
4039# Separate multiple drivers with spaces.
4040#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4041
4042# Set to 0 to disable, 1 to enable USB autosuspend feature.
4043USB_AUTOSUSPEND=1
4044
4045# Exclude listed devices from USB autosuspend (separate with spaces).
4046# Use lsusb to get the ids.
4047# Note: input devices (usbhid) are excluded automatically
4048#USB_BLACKLIST="1111:2222 3333:4444"
4049
4050# Bluetooth devices are excluded from USB autosuspend:
4051# 0=do not exclude, 1=exclude.
4052USB_BLACKLIST_BTUSB=0
4053
4054# Phone devices are excluded from USB autosuspend:
4055# 0=do not exclude, 1=exclude (enable charging).
4056USB_BLACKLIST_PHONE=0
4057
4058# Printers are excluded from USB autosuspend:
4059# 0=do not exclude, 1=exclude.
4060USB_BLACKLIST_PRINTER=1
4061
4062# WWAN devices are excluded from USB autosuspend:
4063# 0=do not exclude, 1=exclude.
4064USB_BLACKLIST_WWAN=1
4065
4066# Include listed devices into USB autosuspend even if already excluded
4067# by the blacklists above (separate with spaces).
4068# Use lsusb to get the ids.
4069#USB_WHITELIST="1111:2222 3333:4444"
4070
4071# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4072# (workaround for USB devices that cause shutdown problems).
4073#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4074
4075# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4076# on system startup: 0=disable, 1=enable.
4077# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4078# are ignored when this is enabled!
4079#RESTORE_DEVICE_STATE_ON_STARTUP=0
4080RESTORE_DEVICE_STATE_ON_STARTUP=1
4081
4082# Radio devices to disable on startup: bluetooth, wifi, wwan.
4083# Separate multiple devices with spaces.
4084#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4085
4086# Radio devices to enable on startup: bluetooth, wifi, wwan.
4087# Separate multiple devices with spaces.
4088#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4089
4090# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4091# (workaround for devices that are blocking shutdown).
4092#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4093
4094# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4095# (to prevent other operating systems from missing radios).
4096#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4097
4098# Radio devices to enable on AC: bluetooth, wifi, wwan.
4099#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4100
4101# Radio devices to disable on battery: bluetooth, wifi, wwan.
4102#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4103
4104# Radio devices to disable on battery when not in use (not connected):
4105# bluetooth, wifi, wwan.
4106#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4107
4108# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4109# required). Charging starts when the remaining capacity falls below the
4110# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4111# Main / Internal battery (values in %)
4112#START_CHARGE_THRESH_BAT0=75
4113#STOP_CHARGE_THRESH_BAT0=80
4114# Ultrabay / Slice / Replaceable battery (values in %)
4115#START_CHARGE_THRESH_BAT1=75
4116#STOP_CHARGE_THRESH_BAT1=80
4117
4118# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4119#RESTORE_THRESHOLDS_ON_BAT=1
4120
4121# ------------------------------------------------------------------------------
4122# tlp-rdw - Parameters for the radio device wizard
4123# Possible devices: bluetooth, wifi, wwan.
4124
4125# Hints:
4126# - Parameters are disabled by default, remove the leading # to enable them
4127# - Separate multiple radio devices with spaces
4128
4129# Radio devices to disable on connect.
4130#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4131#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4132#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4133
4134# Radio devices to enable on disconnect.
4135#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4136#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4137#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4138
4139# Radio devices to enable/disable when docked.
4140#DEVICES_TO_ENABLE_ON_DOCK=""
4141#DEVICES_TO_DISABLE_ON_DOCK=""
4142
4143# Radio devices to enable/disable when undocked.
4144#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4145#DEVICES_TO_DISABLE_ON_UNDOCK=""
4146#+end_src
4147
2e877d14
AB
4148** X
4149
4150*** xprofile
4151:PROPERTIES:
4152:header-args+: :tangle ~/.xprofile
4153:END:
4154
4155=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4156contrary, it's automatically sourced by LightDM, my display manager of
4157choice.
4158
fb52d1f9 4159#+begin_src sh :tangle no
6bab6a4a 4160xset -b # disable bell
b5208764 4161xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
6bab6a4a 4162
2e877d14
AB
4163# setxkbmap -option compose:ralt
4164
4165setxkbmap -option ctrl:nocaps # turn capslock into control
4166setxkbmap -option altwin:swap_alt_win # swap alt and super
4167
4168if [ $(hostname) = "plasma" ]
4169then
4170 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4171fi
4172
4173if [ $(hostname) = "enigma" ]
4174then
4175 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4176fi
4177
4178light -Scrs "intel_backlight" 2
4179
4180source $HOME/.zprofile
4181
4182export _JAVA_AWT_WM_NONREPARENTING=1
4183export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4184
2e877d14
AB
4185if [ $(hostname) = "plasma" ]
4186then
c0132386 4187 unlock-def-gk.py &
2e877d14 4188fi
c0132386
AB
4189
4190bspwm &
2e877d14
AB
4191#+end_src
4192
4193*** X resources
4194
4195**** Xresources
4196:PROPERTIES:
4197:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4198:END:
4199
4200#+begin_src conf-xdefaults
4201#include ".Xresources.d/fonts"
4202! #include ".Xresources.d/colors"
4203#include ".Xresources.d/emacs"
4204#include ".Xresources.d/rxvt-unicode"
4205#+end_src
4206
4207**** Xresources.d
4208
4209***** fonts
4210:PROPERTIES:
4211:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4212:END:
4213
4214#+begin_src conf-xdefaults
4215Xft.lcdfilter: lcddefault
4216Xft.antialias: true
4217Xft.autohint: 0
4218Xft.hinting: true
4219Xft.hintstyle: hintslight
4220! Xft.hintstyle: hintfull
4221Xft.rgba: rgb
4222Xft.dpi: 96
4223#+end_src
4224
4225***** colors
4226:PROPERTIES:
4227:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4228:END:
4229
4230#+begin_src conf-xdefaults :tangle no
4231#include "gruvbox-light.xresources"
4232! #include "gruvbox-dark.xresources"
4233#include "gruvbox-urxvt256.xresources"
4234#+end_src
4235
4236#+begin_src conf-xdefaults :tangle no
4237! -----------------------------------------------------------------------------
4238! File: gruvbox-light.xresources
4239! Description: Retro groove colorscheme generalized
4240! Author: morhetz <morhetz@gmail.com>
4241! Source: https://github.com/morhetz/gruvbox-generalized
4242! Last Modified: 6 Sep 2014
4243! -----------------------------------------------------------------------------
4244
4245! hard contrast: *background: #f9f5d7
4246*background: #fbf1c7
4247! soft contrast: *background: #f2e5bc
4248*foreground: #3c3836
4249! Black + DarkGrey
4250*color0: #fdf4c1
4251*color8: #928374
4252! DarkRed + Red
4253*color1: #cc241d
4254*color9: #9d0006
4255! DarkGreen + Green
4256*color2: #98971a
4257*color10: #79740e
4258! DarkYellow + Yellow
4259*color3: #d79921
4260*color11: #b57614
4261! DarkBlue + Blue
4262*color4: #458588
4263*color12: #076678
4264! DarkMagenta + Magenta
4265*color5: #b16286
4266*color13: #8f3f71
4267! DarkCyan + Cyan
4268*color6: #689d6a
4269*color14: #427b58
4270! LightGrey + White
4271*color7: #7c6f64
4272*color15: #3c3836
4273#+end_src
4274
4275#+begin_src conf-xdefaults :tangle no
4276! -----------------------------------------------------------------------------
4277! File: gruvbox-dark.xresources
4278! Description: Retro groove colorscheme generalized
4279! Author: morhetz <morhetz@gmail.com>
4280! Source: https://github.com/morhetz/gruvbox-generalized
4281! Last Modified: 6 Sep 2014
4282! -----------------------------------------------------------------------------
4283
4284! hard contrast: *background: #1d2021
4285*background: #282828
4286! soft contrast: *background: #32302f
4287*foreground: #ebdbb2
4288! Black + DarkGrey
4289*color0: #282828
4290*color8: #928374
4291! DarkRed + Red
4292*color1: #cc241d
4293*color9: #fb4934
4294! DarkGreen + Green
4295*color2: #98971a
4296*color10: #b8bb26
4297! DarkYellow + Yellow
4298*color3: #d79921
4299*color11: #fabd2f
4300! DarkBlue + Blue
4301*color4: #458588
4302*color12: #83a598
4303! DarkMagenta + Magenta
4304*color5: #b16286
4305*color13: #d3869b
4306! DarkCyan + Cyan
4307*color6: #689d6a
4308*color14: #8ec07c
4309! LightGrey + White
4310*color7: #a89984
4311*color15: #ebdbb2
4312#+end_src
4313
4314#+begin_src conf-xdefaults :tangle no
4315! -----------------------------------------------------------------------------
4316! File: gruvbox-urxvt256.xresources
4317! Description: Retro groove colorscheme generalized
4318! Author: morhetz <morhetz@gmail.com>
4319! Source: https://github.com/morhetz/gruvbox-generalized
4320! Last Modified: 13 Dec 2013
4321! -----------------------------------------------------------------------------
4322
4323URxvt.color24: #076678
4324URxvt.color66: #427b58
4325URxvt.color88: #9d0006
4326URxvt.color96: #8f3f71
4327URxvt.color100: #79740e
4328URxvt.color108: #8ec07c
4329URxvt.color109: #83a598
4330URxvt.color130: #af3a03
4331URxvt.color136: #b57614
4332URxvt.color142: #b8bb26
4333URxvt.color167: #fb4934
4334URxvt.color175: #d3869b
4335URxvt.color208: #fe8019
4336URxvt.color214: #fabd2f
4337URxvt.color223: #ebdbb2
4338URxvt.color228: #f2e5bc
4339URxvt.color229: #fbf1c7
4340URxvt.color230: #f9f5d7
4341URxvt.color234: #1d2021
4342URxvt.color235: #282828
4343URxvt.color236: #32302f
4344URxvt.color237: #3c3836
4345URxvt.color239: #504945
4346URxvt.color241: #665c54
4347URxvt.color243: #7c6f64
4348URxvt.color244: #928374
4349URxvt.color245: #928374
4350URxvt.color246: #a89984
4351URxvt.color248: #bdae93
4352URxvt.color250: #d5c4a1
4353#+end_src
4354
4355***** emacs
4356:PROPERTIES:
4357:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4358:END:
4359
4360#+begin_src conf-xdefaults
4361Emacs.menuBar: off
4362Emacs.toolBar: off
4363Emacs.verticalScrollBars: off
4364Emacs.cursorBlink: off
4365Emacs.FontBackend: xft,x
4366! Emacs.font: Ubuntu Mono-12
4367! Emacs.font: Triplicate T4C-11
4368! Emacs.font: Ubuntu Mono-10.5
4369! Emacs.font: Ubuntu Mono-12
4370! Emacs.font: Iosevka-11
4371
4372! Emacs.font: Fira Mono:size=15
4373! Emacs.font: DejaVu Sans Mono:size=15
4374! Emacs.font: Inconsolata:size=17
4375! Emacs.font: Inconsolata:size=16
4376! Emacs.font: Inconsolata LGC:size=14
4377! Emacs.font: Source Code Pro Medium-10.5
4378Emacs.font: Ubuntu Mono:size=16
4379! Emacs.font: Iosevka:size=16
4380#+end_src
4381
4382***** rxvt-unicode
4383:PROPERTIES:
4384:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4385:END:
4386
4387#+begin_src conf-xdefaults
4388! Font
4389URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4390URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4391URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4392URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4393
4394URxvt.xftAntialias: true
4395URxvt.letterSpace: 0
4396
4397URxvt.depth: 0
4398URxvt.loginShell: true
4399URxvt.saveLines: 100000
4400URxvt.internalBorder: 3
4401URxvt.lineSpace: 0
4402URxvt.scrollBar: false
4403URxvt.scrollStyle: rxvt
4404URxvt*scrollTtyOutput: false
4405URxvt*scrollWithBuffer: true
4406URxvt*scrollTtyKeypress: true
4407URxvt.keysym.Shift-Up: command:\033]720;1\007
4408URxvt.keysym.Shift-Down: command:\033]721;1\007
4409
4410URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4411URxvt.perl-ext: bidi
4412URxvt.bidi.enabled: 1
4413URxvt.url-select.launcher: firefox
4414URxvt.url-select.underline: true
4415URxvt.keysym.M-u: perl:url-select:select_next
4416URxvt.keysym.M-Escape: perl:keyboard-select:activate
4417URxvt.keysym.M-s: perl:keyboard-select:search
4418URxvt.url-launcher: /usr/bin/firefox
4419URxvt.matcher.button: 1
4420URxvt.iso14755: false
4421URxvt.iso14755_53: false
4422URxvt.keysym.M-c: perl:clipboard:copy
4423URxvt.keysym.M-v: perl:clipboard:paste
4424URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4425URxvt.keysym.C-Up: font-size:increase
4426URxvt.keysym.C-Down: font-size:decrease
4427URxvt.keysym.C-S-Up: font-size:incglobal
4428URxvt.keysym.C-S-Down: font-size:decglobal
4429URxvt.keysym.C-equal: font-size:reset
4430!URxvt.keysym.C-question: font-size:show
4431
4432URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4433
4434!urxvt*foreground: white
4435!urxvt*background: black
4436
4437!*color0: #2E3436
4438!*color1: #a40000
4439!*color2: #4E9A06
4440!*color3: #C4A000
4441!*color4: #3465A4
4442!*color5: #75507B
4443!*color6: #ce5c00
4444!*color7: #babdb9
4445!*color8: #555753
4446!*color9: #EF2929
4447!*color10: #8AE234
4448!*color11: #FCE94F
4449!*color12: #729FCF
4450!*color13: #AD7FA8
4451!*color14: #fcaf3e
4452!*color15: #EEEEEC
4453
4454!URxvt.foreground: #C8C8C8
4455!URxvt.background: #FFFFFF
4456
4457!! black
4458!*color0: #2E3436
4459!*color8: #555753
4460!! red
4461!*color1: #a40000
4462!*color9: #EF2929
4463!! green
4464!*color2: #4E9A06
4465!*color10: #8AE234
4466!! yellow
4467!*color3: #C4A000
4468!*color11: #FCE94F
4469!! blue
4470!*color4: #3465A4
4471!*color12: #729FCF
4472!! purple
4473!*color5: #75507B
4474!*color13: #AD7FA8
4475!! orange (replaces cyan)
4476!*color6: #ce5c00
4477!*color14: #fcaf3e
4478!! white
4479!*color7: #babdb9
4480!*color15: #EEEEEC
4481
4482! Tango colour theme for rxvt-unicode
4483URxvt.background: #FFFFFF
4484URxvt.foreground: #000000
4485
4486! Black
4487URxvt.color0: #2E3436
4488URxvt.color8: #757773
4489
4490! Red
4491URxvt.color1: #CC0000
4492URxvt.color9: #EF2929
4493
4494! Green
4495URxvt.color2: #4E9A06
4496URxvt.color10: #8AE234
4497
4498! Yellow
4499URxvt.color3: #C4A000
4500URxvt.color11: #FCE94F
4501
4502! Blue
4503URxvt.color4: #3465A4
4504URxvt.color12: #729FCF
4505
4506! Magenta
4507URxvt.color5: #75507B
4508URxvt.color13: #AD7FA8
4509
4510!! Cyan
4511!URxvt.color6: #06989A
4512!URxvt.color14: #34E2E2
4513! orange (replaces cyan)
4514*color6: #ce5c00
4515*color14: #fcaf3e
4516
4517! White
4518URxvt.color7: #D3D7CF
4519URxvt.color15: #EEEEEC
4520#+end_src
4521
69a6fe26
AB
4522** XDG
4523:PROPERTIES:
4524:header-args+: :tangle ~/.config/user-dirs.dirs
4525:END:
4526
4527#+begin_src conf
4528XDG_DESKTOP_DIR="$HOME/Desktop"
4529XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4530XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4531XDG_MUSIC_DIR="$HOME/usr/music"
4532XDG_PICTURES_DIR="$HOME/usr/pics"
4533XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4534XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4535XDG_VIDEOS_DIR="$HOME/usr/vids"
4536#+end_src
4537
4538** Zathura
4539:PROPERTIES:
4540:header-args+: :tangle ~/.config/zathura/zathurarc
4541:END:
4542
4543#+begin_src conf
4544set smooth-scroll true
4545set selection-clipboard clipboard
4546set zoom-step 05
4547set default-bg "#272727"
4548set statusbar-bg "#272727"
4549set inputbar-bg "#373737"
4550#+end_src
4551
b1f6f894
AB
4552** Zsh
4553
4554My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4555[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4556installed.
4557
4558*** zimrc
4559:PROPERTIES:
4560:header-args+: :tangle ~/.zimrc
4561:END:
4562
4563#+begin_src sh
4564
4565
4566#################
4567# CORE SETTINGS #
4568#################
4569
4570#
4571# Zim settings
4572#
4573
4574# Select what modules you would like enabled.
4575# The second line of modules may depend on options set by modules in the first
4576# line. These dependencies are noted on the respective module's README.md.
4577zmodules=(directory environment git git-info history input ssh utility custom \
4578 syntax-highlighting history-substring-search prompt completion)
4579
4580
4581###################
4582# MODULE SETTINGS #
4583###################
4584
4585#
4586# Prompt
4587#
4588
4589# Set your desired prompt here
4590zprompt_theme='pure'
4591#PURE_PROMPT_SYMBOL=λ
4592#PURE_PROMPT_SYMBOL=δ
4593PURE_PROMPT_SYMBOL=➜
4594
4595#
4596# Completion
4597#
4598
4599# set an optional host-specific filename for the completion cache file
4600# if none is provided, the default '.zcompdump' is used.
4601#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4602
4603#
4604# Utility
4605#
4606
4607# Uncomment to enable command correction prompts
4608# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4609setopt CORRECT
4610
4611#
4612# Environment
4613#
4614
4615# Set the string below to the desired terminal title format string.
4616# The terminal title is redrawn upon directory change, however, variables like
4617# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4618# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4619# The example below uses the following format: 'username@host:/current/directory'
4620ztermtitle='%n@%m:%~'
4621
4622#
4623# Input
4624#
4625
4626# Uncomment to enable double-dot expansion.
4627# This appends '../' to your input for each '.' you type after an initial '..'
4628#zdouble_dot_expand='true'
4629
4630#
4631# Syntax-Highlighting
4632#
4633
4634# This determines what highlighters will be used with the syntax-highlighting module.
4635# Documentation of the highlighters can be found here:
4636# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4637# For (u)rxvt, termite and gnome-terminal users,
4638# removing the 'cursor' highlighter will fix the disappearing cursor problem
4639#zhighlighters=(main brackets cursor)
4640zhighlighters=(main brackets pattern)
4641
4642
4643#
4644# SSH
4645#
4646
4647# Load these ssh identities with the ssh module
4648zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4649
4650
4651#
4652# Pacman
4653#
4654
4655# Set (optional) pacman front-end.
4656zpacman_frontend='yay'
4657
4658# Load any helper scripts as defined here
4659#zpacman_helper=(aur)
4660#+end_src
4661
4662*** zlogin
4663:PROPERTIES:
4664:header-args+: :tangle ~/.zlogin
4665:END:
4666
4667#+begin_src sh
4668
4669
4670#
4671# User configuration sourced by login shells
4672#
4673
4674# Initialize zim
4675[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4676#+end_src
4677
4678*** zprofile
4679:PROPERTIES:
4680:header-args+: :tangle ~/.zprofile
4681:END:
4682
4683#+begin_src sh
4684#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4685#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
50fff474 4686export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
b1f6f894
AB
4687export XDG_CONFIG_HOME=$HOME/.config
4688export XDG_DATA_HOME=$HOME/.local/share
4689export XDG_DATA_DIRS=/usr/local/share:/usr/share
4690export MAILDIR="$HOME/mail"
4691export CVS_RSH=ssh
4692#export MATHMODELS=$HOME/src/eiffel/mathmodels
4693#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4694#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4695
4696# Eiffel2Java stuff
4697#export JAVA_HOME=/usr/lib/jvm/default
4698#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4699#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4700#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4701
4702#export PATH="$HOME/usr/build/pvs:$PATH"
4703#export SBCLISP_HOME=/usr/share/sbcl-source
4704#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4705
4706export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4707
4708#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4709#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4710
88bb4858 4711if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
b1f6f894
AB
4712#+end_src
4713
4714*** zshenv
4715:PROPERTIES:
4716:header-args+: :tangle ~/.zshenv
4717:END:
4718
4719#+begin_src sh
4720# Ensure that a non-login, non-interactive shell has a defined environment.
4721if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4722 source "${ZDOTDIR:-$HOME}/.zprofile"
4723fi
4724#+end_src
4725
4726*** zshrc
4727:PROPERTIES:
4728:header-args+: :tangle ~/.zshrc
4729:END:
4730
4731#+begin_src sh
4732# Bash-like navigation
4733#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4734#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4735export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4736#ZLE_SPACE_SUFFIX_CHARS=$'|&'
4737
4738#disable -r time # disable shell reserved word
4739#alias time='time -p' # -p for POSIX output
4740
4741# rehash if last command was pacaur or pacman
4742# (so that zsh picks up changes in $PATH immediately)
4743TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4744
4745#
4746# User configuration sourced by interactive shells
4747#
4748
4749# Change default zim location
4750export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4751
4752# Start zim
4753[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4754
4755ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4756#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4757
4758setopt globdots
4759
4760source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4761source ~/.zsh/zsh-autopair/autopair.zsh
4762
4763
4764### fzf ###
4765
4766source /usr/share/fzf/key-bindings.zsh
4767source /usr/share/fzf/completion.zsh
4768
4769# Accept history selection instead of putting it on
4770# the command line
4771fzf-history-widget-accept() {
4772 fzf-history-widget
4773 zle accept-line
4774}
4775#zle -N fzf-history-widget-accept
4776#bindkey '^R' fzf-history-widget-accept
4777
4778# alt+c preview
4779export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4780
4781### fzf ###
4782
4783
4784# aliases
4785alias mpv="mpv --ytdl-format mp4"
4786alias mv="mv -iv"
4787alias cp="cp -iv"
4788alias scl=systemctl
4789alias jcl=journalctl
4790alias m="mbsync -Va; getmail; notmuch new"
4791alias best="youtube-dl -f best"
2a1be6b4 4792alias nixx="ssh amin@nix.aminb.org"
373a060a 4793alias fence="ssh aminb@fencepost.gnu.org"
b1f6f894
AB
4794
4795aur() {
4796 cd ~/usr/build
4797 git clone https://aur.archlinux.org/${1}.git
4798 cd ${1}
4799}
4800
4801# i-beam cursor
4802echo -e "\033[5 q"
4803#echo -e "\033[6 q"
4804#+end_src
4805
b13e2dc1
AB
4806* Scripts
4807
4808This section contains various useful scripts and the ones used by the
4809programs above. For instance, =toggle-tablet= for switching to and
4810from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4811Xfce's presentation mode which keeps the screen awake, and
4812=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4813exact brightness value.
4814
4815** rofi-light
4816:PROPERTIES:
4817:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4818:END:
4819
33c5a5cd 4820#+begin_src bash
b13e2dc1 4821cur=$(light -G)
c2ce9b12 4822val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
b13e2dc1
AB
4823light -S $val
4824#+end_src
4825
4826** toggle-layout
4827:PROPERTIES:
4828:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4829:END:
4830
33c5a5cd 4831#+begin_src bash
b13e2dc1
AB
4832lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4833
4834if [ "$lang" = "us" ]; then
4835 setxkbmap ir
4836else
4837 setxkbmap us
4838 # xmodmap $HOME/.Xmodmap
4839fi
4840#+end_src
4841
4842** toggle-presentation-mode
4843:PROPERTIES:
4844:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4845:END:
4846
33c5a5cd 4847#+begin_src bash
b13e2dc1
AB
4848xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4849#+end_src
33c5a5cd 4850
72f329ba
AB
4851** toggle-tablet
4852:PROPERTIES:
4853:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4854:END:
4855
4856This script toggles between a 'normal' mode and a 'tablet' mode, doing
4857a few things:
4858
4859- rotates the screen using =xrandr=, so that rotating the physical
4860 display of my X220t would have the laptop's battery on the right
4861 hand side,
4862- enables touch screen,
4863- properly rotates the stylus pen and touch screen pointers, and
4864- toggles between RGB and Vertical BGR sub-pixel order.
4865
4866#+begin_src bash
4867case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4868 0) # Screen is not rotated, we should rotate it right (90°)
4869 xrandr -o 3
4870 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4871 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4872 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4873 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4874 ;;
4875 1) # Currently top is rotated right, we should set it normal (0°)
4876 xrandr -o 0
4877 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4878 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4879 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4880 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4881 ;;
4882 *)
4883 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4884 exit 1
4885 ;;
4886esac
4887#+end_src
4888
2e877d14
AB
4889** unlock-def-gk.py
4890:PROPERTIES:
4891:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4892:END:
4893
4894#+begin_src python
4895import gnomekeyring as gk
4896# list_item_ids_sync('login')[0] == 1L
4897gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4898#+end_src
4899
4f183f2a
AB
4900** wp
4901
4902My little wallpaper changer script.
4903
4904*** wp
4905:PROPERTIES:
4906:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4907:END:
4908
4909#+begin_src bash :tangle no
4910export DISPLAY=:0
4911
4912case "$1" in
4913 "day")
4914 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4915 ;;
4916 "night")
4917 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4918 ;;
4919 *)
4920 echo $"Usage: $0 {day|night}"
4921 exit 1
4922esac
4923#+end_src
4924
4925*** wp-auto
4926:PROPERTIES:
4927:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4928:END:
4929
4930#+begin_src bash :tangle no
4931SED=$(which sed)
4932ROFI=$(which rofi)
4933
4934export DISPLAY=:0
4935HOUR=$(date +%H)
4936
4937if [ -z "${SED}" ]
4938then
4939 echo "Did not find 'sed', script cannot continue."
4940 exit 1
4941fi
4942if [ -z "${ROFI}" ]
4943then
4944 echo "Did not find rofi, there is no point to continue."
4945 exit 1
4946fi
4947
4948###
4949# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4950# Repeated calls should leave the config clean-ish
4951###
4952function set_theme()
4953{
4954 CDIR="${HOME}/.config/rofi/"
4955 if [ ! -d "${CDIR}" ]
4956 then
4957 mkdir -p ${CDIR}
4958 fi
4959 if [ -f "${CDIR}/config" ]
4960 then
4961 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4962 fi
4963 echo "rofi.theme: ${1}" >> "${CDIR}/config"
4964
4965}
4966
4967if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4968 then
4969 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4970 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4971 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4972 else
4973 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4974 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4975 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4976fi
4977#+end_src
4978
4979*** wp.service
4980:PROPERTIES:
4981:header-args+: :tangle ~/.config/systemd/user/wp.service
4982:END:
4983
4984#+begin_src conf :tangle no
4985[Unit]
4986Description=wallpaper service
4987
4988[Service]
4989Type=oneshot
4990ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4991#+end_src
4992
4993*** wp.timer
4994:PROPERTIES:
4995:header-args+: :tangle ~/.config/systemd/user/wp.timer
4996:END:
4997
4998#+begin_src conf :tangle no
4999[Unit]
5000[Unit]
5001Description=wallpaper timer
5002
5003[Timer]
5004OnCalendar=07,21:00
5005Unit=wp.service
5006Persistent=true
5007
5008[Install]
5009WantedBy=timers.target
5010#+end_src
5011
69a6fe26
AB
5012** zathura-sync.sh
5013:PROPERTIES:
5014:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5015:END:
5016
5017#+begin_src sh
5018pos="$1"
5019pdffile="$2"
5020zathura --synctex-forward "$pos" "$pdffile" || \
5021 (
5022 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5023 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5024#+end_src
33c5a5cd
AB
5025** Fun :)
5026
5027*** eat-em
5028:PROPERTIES:
5029:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5030:END:
5031
5032#+begin_src sh
5033# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5034# [ESC] character in original post removed here.
5035
5036# ANSI Color -- use these variables to easily have different color
5037# and format output. Make sure to output the reset sequence after
5038# colors (f = foreground, b = background), and use the 'off'
5039# feature for anything you turn on.
5040
5041initializeANSI()
5042{
5043 esc="$(echo -en '\e')"
5044
5045 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5046 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5047 cyanf="${esc}[36m"; whitef="${esc}[37m"
5048
5049 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5050 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5051 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5052
5053 boldon="${esc}[1m"; boldoff="${esc}[22m"
5054 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5055 ulon="${esc}[4m"; uloff="${esc}[24m"
5056 invon="${esc}[7m"; invoff="${esc}[27m"
5057
5058 reset="${esc}[0m"
5059}
5060
5061# note in this first use that switching colors doesn't require a reset
5062# first - the new color overrides the old one.
5063
5064#clear
5065
5066initializeANSI
5067
5068cat << EOF
5069
5070 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5071 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5072 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5073 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5074 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5075 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5076
5077 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5078 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5079 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5080 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5081 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5082 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5083
5084EOF
5085#+end_src
5086
33c5a5cd
AB
5087*** invade-em
5088:PROPERTIES:
5089:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5090:END:
5091
5092#+begin_src bash
5093#
5094# ANSI color scheme script featuring Space Invaders
5095#
5096# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5097# Modified by lolilolicon
5098#
5099
5100f=3 b=4
5101for j in f b; do
5102 for i in {0..7}; do
5103 printf -v $j$i %b "\e[${!j}${i}m"
5104 done
5105done
5106bld=$'\e[1m'
5107rst=$'\e[0m'
5108
5109cat << EOF
5110
5111 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5112 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5113 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5114 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5115
5116 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5117 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5118 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5119 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5120
5121
5122 $f7▌$rst
5123
5124 $f7▌$rst
5125
5126 $f7 ▄█▄ $rst
5127 $f7▄█████████▄$rst
5128 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5129
5130EOF
5131#+end_src