[rc/sway] launch dunst on start, and swap bspwm & original bindings
[~bandali/configs] / rc.org
... / ...
CommitLineData
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
17** bspwm
18
19*** bspwmrc
20:PROPERTIES:
21:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22:END:
23
24#+begin_src sh :tangle no
25sxhkd &
26sh ~/.fehbg &
27xfce4-panel -d &
28compton &
29sleep 0.5 && pasystray --notify=all &
30
31bspc monitor -d I II III IV V VI VII VIII IX X
32#bspc monitor eDP-1 -d I II III IV V
33#bspc monitor HDMI-1 -d VI VII VIII IX X
34
35#bspc config border_width 2
36#bspc config window_gap 8
37bspc config window_gap 0
38
39bspc config bottom_padding 26
40
41bspc config split_ratio 0.52
42bspc config borderless_monocle true
43bspc config gapless_monocle true
44bspc config click_to_focus button1
45bspc config directional_focus_tightness low
46
47#bspc rule -a Firefox desktop='^1' follow=on
48bspc rule -a Nightly desktop='^1' follow=on
49bspc rule -a Emacs desktop='^2' state=tiled follow=on
50#bspc rule -a Chromium desktop='^4' follow=on
51bspc rule -a URxvt state=floating
52bspc rule -a URxvt:tiled state=tiled
53bspc rule -a Connman-gtk state=floating
54bspc rule -a Xfce4-panel state=floating
55bspc rule -a TelegramDesktop state=floating
56bspc rule -a Ec state=floating
57bspc rule -a Pavucontrol state=floating
58bspc rule -a Eog state=floating
59bspc rule -a Seahorse state=floating
60bspc rule -a mpv state=floating
61bspc rule -a Evince state=floating
62bspc rule -a Meld state=floating
63bspc rule -a Autokey-gtk state=floating
64bspc rule -a Mousepad state=floating
65bspc rule -a Wrapper-1.0 state=floating
66bspc rule -a File-roller state=floating
67bspc rule -a Gnome-disks state=floating
68bspc rule -a Termite state=floating
69bspc rule -a Termite:tiled state=tiled
70bspc rule -a Thunderbird:Calendar state=floating
71bspc rule -a Audacity state=floating
72bspc rule -a Proof state=floating # pvs x-show-proof
73bspc rule -a Nm-connection-editor state=floating
74bspc rule -a Wire state=floating
75bspc rule -a discord state=floating
76bspc rule -a X2goclient state=floating
77bspc rule -a SimpleScreenRecorder state=floating
78bspc rule -a Gimp state=floating
79bspc rule -a Wrapper-2.0 state=floating
80bspc rule -a Zathura state=tiled
81#+end_src
82
83*** sxhkdrc
84:PROPERTIES:
85:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86:END:
87
88#+begin_src conf :tangle no
89#
90# wm independent hotkeys
91#
92
93# terminal emulator
94super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97#super + {_,shift} + Return
98# termite{_, --name=tiled}
99
100# program launcher
101super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104super + alt + space
105 xfce4-popup-whiskermenu
106
107# window finder
108super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111# password manager
112alt + space
113 rofi-pass
114
115# firefox
116#super + r
117# firefox
118
119# chromium
120#super + c
121# chromium -incognito
122
123# emacs
124super + e
125 emacs
126
127# make sxhkd reload its configuration files:
128super + Escape
129 pkill -USR1 -x sxhkd
130
131# volume {up,down}
132XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135# mute
136XF86AudioMute
137 pamixer --toggle-mute
138
139XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142# playback control
143XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146# lock the screen
147super + shift + q
148 light-locker-command -l
149
150# Toggle keyboard layout
151super + F7
152 toggle-layout
153
154# Toggle Xfce presentation mode
155XF86LaunchB
156 toggle-presentation-mode
157
158# monitor brightness
159XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162super + apostrophe
163 rofi-light
164
165# keyboard brightness
166#XF86KbdBrightness{Up,Down}
167# kbdlight {up,down}
168
169XF86RotateWindows
170 toggle-tablet
171
172#
173# bspwm hotkeys
174#
175
176# quit bspwm normally
177super + alt + Escape
178 bspc quit
179
180# close and kill
181super + {w,q}
182 bspc node -{c,k}
183
184# alternate between the tiled and monocle layout
185super + m
186 bspc desktop -l next
187
188# send the newest marked node to the newest preselected node
189super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192# swap the current node and the biggest node
193super + g
194 bspc node -s biggest
195
196#
197# state/flags
198#
199
200# set the window state
201super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204# set the node flags
205super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208#
209# focus/swap
210#
211
212# focus the node in the given direction
213super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216# focus the node for the given path jump
217super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220# focus the next/previous node in the current desktop
221super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224# focus the next/previous desktop in the current monitor
225super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228# send to next/prev desktop
229super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232# focus the last node/desktop
233super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236# focus the older or newer node in the focus history
237super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242# focus or send to the given desktop
243super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246#
247# preselect
248#
249
250# preselect the direction
251super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254# preselect the ratio
255super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258# cancel the preselection for the focused node
259super + ctrl + space
260 bspc node -p cancel
261
262# cancel the preselection for the focused desktop
263super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266#
267# move/resize
268#
269
270# expand a window by moving one of its side outward
271super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274# contract a window by moving one of its side inward
275super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278# move a floating window
279super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282#alt + bracket{left,right}
283# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284#+end_src
285
286** compton
287:PROPERTIES:
288:header-args+: :tangle ~/.config/compton.conf
289:END:
290
291#+begin_src conf :tangle no
292# Shadow
293shadow = false; # Enabled client-side shadows on windows.
294no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295no-dnd-shadow = true; # Don't draw shadows on DND windows.
296clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298shadow-radius = 5; # The blur radius for shadows. (default 12)
299shadow-offset-x = -5; # The left offset for shadows. (default -15)
300shadow-offset-y = -5; # The top offset for shadows. (default -15)
301# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306# shadow-exclude = "n:e:Notification";
307#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311# Opacity
312menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323# blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326# blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332# Fading
333fading = false; # Fade windows during opacity changes.
334fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338fade-exclude = [ ]; # Exclude conditions for fading.
339
340# Other
341backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355dbe = false; # Enable DBE painting mode. Rarely needed.
356paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368# GLX backend # GLX backend fine-tune options. See man page for more info.
369glx-no-stencil = true; # Recommended.
370glx-copy-from-front = false; # Useful with --glx-swap-method,
371# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372# glx-no-rebind-pixmap = true; # Recommended if it works.
373glx-no-rebind-pixmap = true; # Recommended if it works.
374#glx-swap-method = "4"; # See man page.
375glx-swap-method = "4"; # See man page.
376
377# Window type settings
378wintypes:
379{
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389};
390#+end_src
391
392** Dunst
393:PROPERTIES:
394:header-args+: :tangle ~/.config/dunst/dunstrc
395:END:
396
397#+begin_src conf
398[global]
399#font = Ubuntu Mono 10.5
400font = Inconsolata 11
401
402# Path to default icons.
403icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405icon_position = left
406# <b>bold</b>
407# <i>italic</i>
408# <s>strikethrough<s/>
409# <u>underline</u>
410markup = full
411# The format of the message. Possible variables are:
412# %a appname
413# %s summary
414# %b body
415# %i iconname (including its path)
416# %I iconname (without its path)
417# %p progress value if set ([ 0%] to [100%]) or nothing
418# Markup is allowed
419format = "<b>%s</b>\n%b"
420# Sort messages by urgency
421sort = yes
422# Show how many messages are currently hidden (because of geometry)
423indicate_hiddenl= no
424# Alignment of message text.
425# Possible values are "left", "center" and "right"
426alignment = center
427# The frequency with wich text that is longer than the notification
428# window allows bounces back and forth.
429# This option conflicts with 'word_wrap'.
430# Set to 0 to disable
431bounce_freq = 3
432# show age of message if message is older than show_age_threshold seconds.
433# set to -1 to disable
434show_age_threshold = -1
435# split notifications into multiple lines if they don't fit into geometry
436word_wrap = yes
437# ignore newlines '\n' in notifications
438ignore_newline = no
439# The geometry of the message window.
440# geometry [{width}]x{height}][+/-{x}+/-{y}]
441# The height is measured in number of notifications everything else in pixels. If the width
442# is omitted but the height is given ("-geometry x2"), the message window
443# expands over the whole screen (dmenu-like). If width is 0,
444# the window expands to the longest message displayed.
445# A positive x is measured from the left, a negative from the
446# right side of the screen. Y is measured from the top and down respectevly.
447# The width can be negative. In this case the actual width is the
448# screen width minus the width defined in within the geometry option.
449#geometry = "410x12-12+12"
450#geometry = "0x0-30-30"
451geometry = "260x12-30-30"
452# The transparency of the window. range: [0; 100]
453# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454transparency = 0
455# Don't remove messages, if the user is idle (no mouse or keyboard input)
456# for longer than idle_threshold seconds.
457# Set to 0 to disable.
458idle_threshold = 120
459# Which monitor should the notifications be displayed on.
460monitor = 0
461# Display notification on focused monitor. Possible modes are:
462# mouse: follow mouse pointer
463# keyboard: follow window with keyboard focus
464# none: don't follow anything
465#
466# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467# This should be the case for almost all modern windowmanagers.
468#
469# If this option is set to mouse or keyboard, the monitor option will be
470# ignored.
471follow = keyboard
472# should a notification popped up from history be sticky or
473# timeout as if it would normally do.
474sticky_history = yes
475# The height of a single line. If the height is smaller than the font height,
476# it will get raised to the font height.
477# This adds empty space above and under the text.
478line_height = 0
479
480show_indicators = yes
481
482# Draw a line of 'separatpr_height' pixel height between two notifications.
483# Set to 0 to disable
484separator_height = 3
485# padding between text and separator
486padding = 8
487# horizontal padding
488horizontal_padding = 8
489# Define a color for the separator.
490# possible values are:
491# * auto: dunst tries to find a color fitting to the background
492# * foreground: use the same color as the foreground
493# * frame: use the same color as the frame.
494# * anything else will be interpreted as a X color
495separator_color = foreground
496# print a notification on startup
497# This is mainly for error detection, since dbus (re-)starts dunst
498# automatically after a crash.
499startup_notification = false
500# dmenu path
501#dmenu = /usr/bin/dmenu -p dunst:
502dmenu = /usr/bin/rofi -dmenu -p dunst:
503# browser for opening urls in context menu
504browser = /usr/bin/firefox -new-tab
505[frame]
506width = 0
507color = "#377222"
508[shortcuts]
509# shortcuts are specified as [modifier+][modifier+]...key
510# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511# and 'mod4' (windows-key)
512# xev might be helpful to find names for keys
513# close notification
514close = ctrl+space
515# close all notifications
516close_all = ctrl+shift+space
517# redisplay last message(s)
518# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519history = ctrl+shift+h
520# context menu
521context = ctrl+shift+period
522[urgency_low]
523# IMPORTANT: colors have to be defined in quotation marks.
524# Otherwise the '#' and following would be interpreted as a comment.
525background = "#1d2a30"
526foreground = "#71c2af"
527timeout = 3
528[urgency_normal]
529background = "#1d2a30"
530foreground = "#71c2af"
531timeout = 0
532[urgency_critical]
533background = "#1d2a30"
534foreground = "#ff9982"
535timeout = 0
536
537# Every section that isn't one of the above is interpreted as a rules
538# to override settings for certain messages.
539# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540# and you can override the 'timeout', 'urgency', 'foreground', 'background'
541# and 'format'.
542# Shell-like globbing will get expanded.
543#
544# SCRIPTING
545# you can specify a script that gets run when the rule matches by setting
546# the 'script' option.
547# The script will be called as follows:
548# script appname summary body icon urgency
549# where urgency can be "LOW", "NORMAL" or "CRITICAL".
550#
551# NOTE: if you don't want a notification to be displayed, set the format to ""
552# NOTE: It might be helpful to run dunst -print in a terminal in order to find
553# fitting options for rules.
554#[espeak]
555# summary = "*"
556# script = dunst_espeak.sh
557#[script-test]
558# summary = "*script*"
559# script = dunst_test.sh
560#[ignore]
561## This notification will not be displayed
562# summary = "foobar"
563# format = ""
564#[signed_on]
565# appname = Pidgin
566# summary = "*signed on*"
567# urgency = low
568#
569#[signed_off]
570# appname = Pidgin
571# summary = *signed off*
572# urgency = low
573#
574#[says]
575# appname = Pidgin
576# summary = *says*
577# urgency = critical
578#
579#[twitter]
580# appname = Pidgin
581# summary = *twitter.com*
582# urgency = normal
583#
584[xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587#+end_src
588
589** Fontconfig
590:PROPERTIES:
591:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
592:END:
593
594#+begin_src xml
595<?xml version="1.0"?>
596<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597<fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
628 <accept>
629 <family>Liberation Sans</family>
630 </accept>
631</alias>
632</fontconfig>
633#+end_src
634
635** Git
636
637*** gitconfig
638:PROPERTIES:
639:header-args+: :tangle ~/.gitconfig
640:END:
641
642**** user
643#+begin_src conf
644[user]
645 name = Amin Bandali
646 email = amin@aminb.org
647 signingkey = 4E05246AB0BF7FFB
648#+end_src
649
650**** signing
651#+begin_src conf
652[commit]
653 gpgsign = true
654# [format]
655# signoff = true
656#+end_src
657
658**** core
659#+begin_src conf
660[core]
661 autocrlf = input # CRLF -> LF on commit
662 editor = emacsclient -t
663 excludesfile = ~/.gitignore_global
664 pager = "less"
665#+end_src
666
667**** gpg
668#+begin_src conf
669[gpg]
670 program = gpg2
671#+end_src
672
673**** alias
674#+begin_src conf
675[alias]
676 git = !exec git # handle nested git calls, e.g. git git status
677 aliases = config --get-regexp '^alias\\.'
678 a = add
679 s = status
680 sl = status --long
681 c = checkout
682 cb = checkout -b
683 b = branch
684 r = rebase
685 p = pull
686 pr = pull --rebase
687 ps = push
688 psf = push --force
689#+end_src
690
691**** color
692#+begin_src conf
693[color]
694 ui = auto
695[color "status"]
696 added = green bold
697 changed = red bold
698 untracked = red bold
699[color "branch"]
700 current = green bold
701 remote = magenta bold
702[color "diff"]
703 new = green bold
704 old = red bold
705#+end_src
706
707**** status
708#+begin_src conf
709[status]
710 # showUntrackedFiles = all
711 short=true
712 branch=true
713#+end_src
714
715**** github
716#+begin_src conf
717[github]
718 user = aminb
719#+end_src
720
721**** send-email
722#+begin_src conf
723[sendemail]
724 smtpuser = amin@aminb.org
725 smtpserver = nix.aminb.org
726 smtpserverport = 587
727 smtpencryption = tls
728 annotate = yes
729#+end_src
730
731*** gitignore
732:PROPERTIES:
733:header-args+: :tangle ~/.gitignore_global
734:END:
735
736#+begin_src conf
737*.orig
738*.py[co]
739*.sublime-workspace
740*~
741.DS_Store
742*.elc
743*-autoloads.el
744#+end_src
745
746** [[https://github.com/Leinnan/i3gs][i3gs]]
747:PROPERTIES:
748:header-args+: :tangle ~/.config/i3gs/config
749:END:
750
751#+begin_src conf :comments none
752borders_width=0 0 2 0
753separator_width=10
754
755[mpd]
756preset=MPD
757title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
758borders_color=#7FDBFF
759
760[ram]
761preset=RAM
762title=<span weight='heavy' fgcolor='#3D9970'> </span>
763borders_color=#3D9970
764
765[cpu]
766preset=CPU
767title=<span weight='heavy' fgcolor='#2ECC40'> </span>
768borders_color=#2ECC40
769
770[hdd]
771preset=HDD
772title=<span weight='heavy' fgcolor='#01FF70'> </span>
773borders_color=#01FF70
774
775[battery]
776preset=BAT
777command=battery-percentage-time
778title=<span weight='heavy' fgcolor='#39CCCC'> </span>
779borders_color=#39CCCC
780
781[wifi]
782preset=WIFI
783title=<span weight='heavy' fgcolor='#01FF70'> </span>
784borders_color=#01FF70
785
786[date]
787preset=DATE
788command=date '+%-I:%M, %a %b %d'
789title=<span weight='heavy' fgcolor='#FFDC00'> </span>
790borders_color=#FFDC00
791separator_width=0
792#+end_src
793** Latexmk
794:PROPERTIES:
795:header-args+: :tangle ~/.latexmkrc
796:END:
797
798#+begin_src conf
799$pdf_previewer = "start zathura %O %S";
800$clean_ext = "aux out";
801
802# $pdf_update_method = 4;
803# $pdf_update_command = "zathura %O %S";
804
805# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
806# by Ctrl+click in the PDF.
807# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
808# editor.
809# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
810#+end_src
811
812** libinput
813
814Improve XPS 15 9560's touchpad experience.
815
816# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
817#+begin_src conf :tangle no
818Section "InputClass"
819 Identifier "libinput touchpad catchall"
820 Driver "libinput"
821 MatchIsTouchpad "on"
822 Option "ClickMethod" "clickfinger"
823 Option "NaturalScrolling" "true"
824 Option "Tapping" "on"
825 Option "TappingButtonMap" "lrm"
826EndSection
827#+end_src
828
829** getmail
830
831*** getmailrc
832:PROPERTIES:
833:header-args+: :tangle ~/.getmail/getmailrc
834:END:
835
836#+begin_src conf
837[retriever]
838type = SimplePOP3SSLRetriever
839server = fencepost.gnu.org
840username = aminb
841password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
842port = 995
843use_apop = True
844
845[destination]
846type = Maildir
847path = ~/mail/gnu/Inbox/
848
849[options]
850delete = True
851#+end_src
852
853*** getmail.service
854:PROPERTIES:
855:header-args+: :tangle ~/.config/systemd/user/getmail.service
856:END:
857
858#+begin_src conf :tangle no
859[Unit]
860Description=getmail service
861
862[Service]
863Type=oneshot
864ExecStart=/usr/bin/getmail
865StandardOutput=syslog
866StandardError=syslog
867#+end_src
868
869*** getmail.timer
870:PROPERTIES:
871:header-args+: :tangle ~/.config/systemd/user/getmail.timer
872:END:
873
874#+begin_src conf :tangle no
875[Unit]
876Description=getmail timer
877
878[Timer]
879OnCalendar=*:0/30
880Persistent=true
881Unit=getmail.service
882
883[Install]
884WantedBy=timers.target
885#+end_src
886
887** GnuPG
888:PROPERTIES:
889:header-args+: :tangle ~/.gnupg/gpg-agent.conf
890:END:
891
892#+begin_src conf
893default-cache-ttl 43200
894max-cache-ttl 43200
895
896default-cache-ttl-ssh 10800
897max-cache-ttl-ssh 10800
898
899# pinentry-program /usr/bin/pinentry-qt
900#+end_src
901
902** GTK
903
904*** gtk-2.0
905:PROPERTIES:
906:header-args+: :tangle ~/.gtkrc-2.0
907:END:
908
909#+begin_src conf
910gtk-theme-name="Greybird"
911gtk-icon-theme-name="Paper"
912gtk-font-name="Ubuntu 10"
913gtk-menu-images=0
914# gtk-key-theme-name = "Emacs"
915#+end_src
916
917*** gtk-3.0
918:PROPERTIES:
919:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
920:END:
921
922#+begin_src conf :tangle no
923[Settings]
924gtk-icon-theme-name = Paper
925# gtk-theme-name = Adwaita
926
927gtk-theme-name = Greybird
928# gtk-theme-name = Arc-Darker
929# gtk-theme-name = Numix-ArchBlue
930
931gtk-font-name = Ubuntu 10
932# gtk-key-theme-name = Emacs
933#+end_src
934
935** isync
936
937*** mbsyncrc
938:PROPERTIES:
939:header-args+: :tangle ~/.mbsyncrc
940:END:
941
942#+begin_src conf
943# Global defaults
944CopyArrivalDate yes
945
946######
947IMAPAccount amin
948Host nix.aminb.org
949User amin@aminb.org
950PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
951SSLType IMAPS
952
953IMAPStore amin-remote
954Account amin
955
956MaildirStore amin-local
957Path ~/mail/amin/
958Inbox ~/mail/amin/Inbox
959SubFolders Verbatim
960
961Channel amin
962Master :amin-remote:
963Slave :amin-local:
964Patterns * !dovecot*
965Create Both
966SyncState *
967
968######
969IMAPAccount uwaterloo
970Host connect.uwaterloo.ca
971User abandali
972PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
973SSLType IMAPS
974
975IMAPStore uwaterloo-remote
976Account uwaterloo
977
978MaildirStore uwaterloo-local
979Path ~/mail/uwaterloo/
980Inbox ~/mail/uwaterloo/Inbox
981SubFolders Verbatim
982
983Channel uwaterloo
984Master :uwaterloo-remote:
985Slave :uwaterloo-local:
986Patterns * !dovecot*
987Create Both
988SyncState *
989#+end_src
990
991*** mbsync.service
992:PROPERTIES:
993:header-args+: :tangle ~/.config/systemd/user/mbsync.service
994:END:
995
996#+begin_src conf :tangle no
997[Unit]
998Description=mbsync service
999
1000[Service]
1001Type=oneshot
1002ExecStart=/usr/bin/mbsync -Va
1003StandardOutput=syslog
1004StandardError=syslog
1005#+end_src
1006
1007*** mbsync.timer
1008:PROPERTIES:
1009:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1010:END:
1011
1012#+begin_src conf :tangle no
1013[Unit]
1014Description=mbsync timer
1015
1016[Timer]
1017OnCalendar=*:0/15
1018Persistent=true
1019Unit=mbsync.service
1020
1021[Install]
1022WantedBy=timers.target
1023#+end_src
1024
1025** mpd
1026:PROPERTIES:
1027:header-args+: :tangle ~/.config/mpd/mpd.conf
1028:END:
1029
1030#+begin_src conf
1031# An example configuration file for MPD.
1032# Read the user manual for documentation: http://www.musicpd.org/doc/user/
1033
1034
1035# Files and directories #######################################################
1036#
1037# This setting controls the top directory which MPD will search to discover the
1038# available audio files and add them to the daemon's online database. This
1039# setting defaults to the XDG directory, otherwise the music directory will be
1040# be disabled and audio files will only be accepted over ipc socket (using
1041# file:// protocol) or streaming files over an accepted protocol.
1042#
1043music_directory "~/usr/music"
1044#
1045# This setting sets the MPD internal playlist directory. The purpose of this
1046# directory is storage for playlists created by MPD. The server will use
1047# playlist files not created by the server but only if they are in the MPD
1048# format. This setting defaults to playlist saving being disabled.
1049#
1050playlist_directory "~/.mpd/playlists"
1051#
1052# This setting sets the location of the MPD database. This file is used to
1053# load the database at server start up and store the database while the
1054# server is not up. This setting defaults to disabled which will allow
1055# MPD to accept files over ipc socket (using file:// protocol) or streaming
1056# files over an accepted protocol.
1057#
1058db_file "~/.mpd/database"
1059#
1060# These settings are the locations for the daemon log files for the daemon.
1061# These logs are great for troubleshooting, depending on your log_level
1062# settings.
1063#
1064# The special value "syslog" makes MPD use the local syslog daemon. This
1065# setting defaults to logging to syslog, otherwise logging is disabled.
1066#
1067log_file "~/.mpd/log"
1068#
1069# This setting sets the location of the file which stores the process ID
1070# for use of mpd --kill and some init scripts. This setting is disabled by
1071# default and the pid file will not be stored.
1072#
1073pid_file "~/.mpd/pid"
1074#
1075# This setting sets the location of the file which contains information about
1076# most variables to get MPD back into the same general shape it was in before
1077# it was brought down. This setting is disabled by default and the server
1078# state will be reset on server start up.
1079#
1080state_file "~/.mpd/state"
1081#
1082# The location of the sticker database. This is a database which
1083# manages dynamic information attached to songs.
1084#
1085sticker_file "~/.mpd/sticker.sql"
1086#
1087###############################################################################
1088
1089
1090# General music daemon options ################################################
1091#
1092# This setting specifies the user that MPD will run as. MPD should never run as
1093# root and you may use this setting to make MPD change its user ID after
1094# initialization. This setting is disabled by default and MPD is run as the
1095# current user.
1096#
1097#user "nobody"
1098#
1099# This setting specifies the group that MPD will run as. If not specified
1100# primary group of user specified with "user" setting will be used (if set).
1101# This is useful if MPD needs to be a member of group such as "audio" to
1102# have permission to use sound card.
1103#
1104#group "nogroup"
1105#
1106# This setting sets the address for the daemon to listen on. Careful attention
1107# should be paid if this is assigned to anything other then the default, any.
1108# This setting can deny access to control of the daemon. Not effective if
1109# systemd socket activiation is in use.
1110#
1111# For network
1112#bind_to_address "any"
1113#
1114# And for Unix Socket
1115#bind_to_address "~/.mpd/socket"
1116#
1117# This setting is the TCP port that is desired for the daemon to get assigned
1118# to.
1119#
1120#port "6600"
1121#
1122# This setting controls the type of information which is logged. Available
1123# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1124# argument is recommended for troubleshooting, though can quickly stretch
1125# available resources on limited hardware storage.
1126#
1127#log_level "default"
1128#
1129# If you have a problem with your MP3s ending abruptly it is recommended that
1130# you set this argument to "no" to attempt to fix the problem. If this solves
1131# the problem, it is highly recommended to fix the MP3 files with vbrfix
1132# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1133# point gapless MP3 playback can be enabled.
1134#
1135#gapless_mp3_playback "yes"
1136#
1137# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1138# of starting playback after startup.
1139#
1140#restore_paused "no"
1141#
1142# This setting enables MPD to create playlists in a format usable by other
1143# music players.
1144#
1145#save_absolute_paths_in_playlists "no"
1146#
1147# This setting defines a list of tag types that will be extracted during the
1148# audio file discovery process. The complete list of possible values can be
1149# found in the user manual.
1150#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1151#
1152# This setting enables automatic update of MPD's database when files in
1153# music_directory are changed.
1154#
1155#auto_update "yes"
1156#
1157# Limit the depth of the directories being watched, 0 means only watch
1158# the music directory itself. There is no limit by default.
1159#
1160#auto_update_depth "3"
1161#
1162###############################################################################
1163
1164
1165# Symbolic link behavior ######################################################
1166#
1167# If this setting is set to "yes", MPD will discover audio files by following
1168# symbolic links outside of the configured music_directory.
1169#
1170#follow_outside_symlinks "yes"
1171#
1172# If this setting is set to "yes", MPD will discover audio files by following
1173# symbolic links inside of the configured music_directory.
1174#
1175#follow_inside_symlinks "yes"
1176#
1177###############################################################################
1178
1179
1180# Zeroconf / Avahi Service Discovery ##########################################
1181#
1182# If this setting is set to "yes", service information will be published with
1183# Zeroconf / Avahi.
1184#
1185#zeroconf_enabled "yes"
1186#
1187# The argument to this setting will be the Zeroconf / Avahi unique name for
1188# this MPD server on the network.
1189#
1190#zeroconf_name "Music Player"
1191#
1192###############################################################################
1193
1194
1195# Permissions #################################################################
1196#
1197# If this setting is set, MPD will require password authorization. The password
1198# setting can be specified multiple times for different password profiles.
1199#
1200#password "password@read,add,control,admin"
1201#
1202# This setting specifies the permissions a user has who has not yet logged in.
1203#
1204#default_permissions "read,add,control,admin"
1205#
1206###############################################################################
1207
1208
1209# Database #######################################################################
1210#
1211
1212#database {
1213# plugin "proxy"
1214# host "other.mpd.host"
1215# port "6600"
1216#}
1217
1218# Input #######################################################################
1219#
1220
1221input {
1222 plugin "curl"
1223# proxy "proxy.isp.com:8080"
1224# proxy_user "user"
1225# proxy_password "password"
1226}
1227
1228#
1229###############################################################################
1230
1231# Audio Output ################################################################
1232#
1233
1234audio_output {
1235 type "pulse"
1236 name "pulse audio"
1237}
1238
1239audio_output {
1240 type "fifo"
1241 name "my_fifo"
1242 path "/tmp/mpd.fifo"
1243 format "44100:16:2"
1244}
1245
1246# MPD supports various audio output types, as well as playing through multiple
1247# audio outputs at the same time, through multiple audio_output settings
1248# blocks. Setting this block is optional, though the server will only attempt
1249# autodetection for one sound card.
1250#
1251# An example of an ALSA output:
1252#
1253#audio_output {
1254# type "alsa"
1255# name "My ALSA Device"
1256## device "hw:0,0" # optional
1257## mixer_type "hardware" # optional
1258## mixer_device "default" # optional
1259## mixer_control "PCM" # optional
1260## mixer_index "0" # optional
1261#}
1262#
1263# An example of an OSS output:
1264#
1265#audio_output {
1266# type "oss"
1267# name "My OSS Device"
1268## device "/dev/dsp" # optional
1269## mixer_type "hardware" # optional
1270## mixer_device "/dev/mixer" # optional
1271## mixer_control "PCM" # optional
1272#}
1273#
1274# An example of a shout output (for streaming to Icecast):
1275#
1276#audio_output {
1277# type "shout"
1278# encoder "vorbis" # optional
1279# name "My Shout Stream"
1280# host "localhost"
1281# port "8000"
1282# mount "/mpd.ogg"
1283# password "hackme"
1284# quality "5.0"
1285# bitrate "128"
1286# format "44100:16:1"
1287## protocol "icecast2" # optional
1288## user "source" # optional
1289## description "My Stream Description" # optional
1290## url "http://example.com" # optional
1291## genre "jazz" # optional
1292## public "no" # optional
1293## timeout "2" # optional
1294## mixer_type "software" # optional
1295#}
1296#
1297# An example of a recorder output:
1298#
1299#audio_output {
1300# type "recorder"
1301# name "My recorder"
1302# encoder "vorbis" # optional, vorbis or lame
1303# path "/var/lib/mpd/recorder/mpd.ogg"
1304## quality "5.0" # do not define if bitrate is defined
1305# bitrate "128" # do not define if quality is defined
1306# format "44100:16:1"
1307#}
1308#
1309# An example of a httpd output (built-in HTTP streaming server):
1310#
1311#audio_output {
1312# type "httpd"
1313# name "My HTTP Stream"
1314# encoder "vorbis" # optional, vorbis or lame
1315# port "8000"
1316# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1317## quality "5.0" # do not define if bitrate is defined
1318# bitrate "128" # do not define if quality is defined
1319# format "44100:16:1"
1320# max_clients "0" # optional 0=no limit
1321#}
1322#
1323# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1324#
1325#audio_output {
1326# type "pulse"
1327# name "My Pulse Output"
1328## server "remote_server" # optional
1329## sink "remote_server_sink" # optional
1330#}
1331#
1332# An example of a winmm output (Windows multimedia API).
1333#
1334#audio_output {
1335# type "winmm"
1336# name "My WinMM output"
1337## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1338# or
1339## device "0" # optional
1340## mixer_type "hardware" # optional
1341#}
1342#
1343# An example of an openal output.
1344#
1345#audio_output {
1346# type "openal"
1347# name "My OpenAL output"
1348## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1349#}
1350#
1351# An example of an sndio output.
1352#
1353#audio_output {
1354# type "sndio"
1355# name "sndio output"
1356# mixer_type "software"
1357#}
1358#
1359# An example of an OS X output:
1360#
1361#audio_output {
1362# type "osx"
1363# name "My OS X Device"
1364## device "Built-in Output" # optional
1365## channel_map "-1,-1,0,1" # optional
1366#}
1367#
1368## Example "pipe" output:
1369#
1370#audio_output {
1371# type "pipe"
1372# name "my pipe"
1373# command "aplay -f cd 2>/dev/null"
1374## Or if you're want to use AudioCompress
1375# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1376## Or to send raw PCM stream through PCM:
1377# command "nc example.org 8765"
1378# format "44100:16:2"
1379#}
1380#
1381## An example of a null output (for no audio output):
1382#
1383#audio_output {
1384# type "null"
1385# name "My Null Output"
1386# mixer_type "none" # optional
1387#}
1388#
1389###############################################################################
1390
1391
1392# Normalization automatic volume adjustments ##################################
1393#
1394# This setting specifies the type of ReplayGain to use. This setting can have
1395# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1396# chooses between "track" and "album" depending on the current state of
1397# random playback. If random playback is enabled then "track" mode is used.
1398# See <http://www.replaygain.org> for more details about ReplayGain.
1399# This setting is off by default.
1400#
1401#replaygain "album"
1402#
1403# This setting sets the pre-amp used for files that have ReplayGain tags. By
1404# default this setting is disabled.
1405#
1406#replaygain_preamp "0"
1407#
1408# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1409# By default this setting is disabled.
1410#
1411#replaygain_missing_preamp "0"
1412#
1413# This setting enables or disables ReplayGain limiting.
1414# MPD calculates actual amplification based on the ReplayGain tags
1415# and replaygain_preamp / replaygain_missing_preamp setting.
1416# If replaygain_limit is enabled MPD will never amplify audio signal
1417# above its original level. If replaygain_limit is disabled such amplification
1418# might occur. By default this setting is enabled.
1419#
1420#replaygain_limit "yes"
1421#
1422# This setting enables on-the-fly normalization volume adjustment. This will
1423# result in the volume of all playing audio to be adjusted so the output has
1424# equal "loudness". This setting is disabled by default.
1425#
1426#volume_normalization "no"
1427#
1428###############################################################################
1429
1430# Character Encoding ##########################################################
1431#
1432# If file or directory names do not display correctly for your locale then you
1433# may need to modify this setting.
1434#
1435#filesystem_charset "UTF-8"
1436#
1437###############################################################################
1438#+end_src
1439
1440** msmtp
1441:PROPERTIES:
1442:header-args+: :tangle ~/.msmtprc
1443:END:
1444
1445#+begin_src conf
1446# Set default values for all following accounts.
1447defaults
1448port 587
1449tls on
1450auth on
1451#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1452logfile ~/.msmtp.log
1453
1454# aminb
1455account aminb
1456host nix.aminb.org
1457tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1458tls_starttls on
1459from amin@aminb.org
1460user amin@aminb.org
1461passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1462
1463# gnu
1464account gnu
1465host fencepost.gnu.org
1466# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1467tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1468tls_starttls on
1469from aminb@gnu.org
1470user aminb
1471passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1472
1473# uwaterloo
1474account uwaterloo
1475host connect.uwaterloo.ca
1476tls_starttls on
1477from abandali@uwaterloo.ca
1478user abandali
1479passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1480tls_trust_file /etc/ssl/certs/ca-certificates.crt
1481
1482# uwaterloo (friendly address)
1483account uwaterloo-friendly : uwaterloo
1484from amin.bandali@uwaterloo.ca
1485
1486# Set a default account
1487account default : aminb
1488#+end_src
1489
1490** ncmpcpp
1491
1492*** config
1493:PROPERTIES:
1494:header-args+: :tangle ~/.ncmpcpp/config
1495:END:
1496
1497#+begin_src conf :tangle no
1498##############################################################
1499## This is the example configuration file. Copy it to ##
1500## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1501## and set up your preferences. ##
1502##############################################################
1503#
1504##### directories ######
1505##
1506## Directory for storing ncmpcpp related files.
1507## Changing it is useful if you want to store
1508## everything somewhere else and provide command
1509## line setting for alternative location to config
1510## file which defines that while launching ncmpcpp.
1511##
1512#
1513ncmpcpp_directory = ~/.ncmpcpp
1514#
1515##
1516## Directory for storing downloaded lyrics. It
1517## defaults to ~/.lyrics since other MPD clients
1518## (eg. ncmpc) also use that location.
1519##
1520#
1521#lyrics_directory = ~/.lyrics
1522#
1523##### connection settings #####
1524#
1525#mpd_host = localhost
1526#
1527#mpd_port = 6600
1528#
1529#mpd_connection_timeout = 5
1530#
1531## Needed for tag editor and file operations to work.
1532##
1533mpd_music_dir = ~/usr/music
1534#
1535#mpd_crossfade_time = 5
1536#
1537##### music visualizer #####
1538##
1539## Note: In order to make music visualizer work you'll
1540## need to use mpd fifo output, whose format parameter
1541## has to be set to 44100:16:1 for mono visualization
1542## or 44100:16:2 for stereo visualization. Example
1543## configuration (it has to be put into mpd.conf):
1544##
1545## audio_output {
1546## type "fifo"
1547## name "Visualizer feed"
1548## path "/tmp/mpd.fifo"
1549## format "44100:16:2"
1550## }
1551##
1552#
1553visualizer_fifo_path = /tmp/mpd.fifo
1554#
1555##
1556## Note: Below parameter is needed for ncmpcpp
1557## to determine which output provides data for
1558## visualizer and thus allow syncing between
1559## visualization and sound as currently there
1560## are some problems with it.
1561##
1562#
1563visualizer_output_name = my fifo
1564#
1565##
1566## If you set format to 44100:16:2, make it 'yes'.
1567##
1568visualizer_in_stereo = yes
1569#
1570##
1571## Multiply received samples by given value. Very
1572## useful for proper visualization of quiet music.
1573##
1574#visualizer_sample_multiplier = 1
1575#
1576##
1577## Note: Below parameter defines how often ncmpcpp
1578## has to "synchronize" visualizer and audio outputs.
1579## 30 seconds is optimal value, but if you experience
1580## synchronization problems, set it to lower value.
1581## Keep in mind that sane values start with >=10.
1582##
1583#
1584visualizer_sync_interval = 30
1585#
1586##
1587## Note: To enable spectrum frequency visualization
1588## you need to compile ncmpcpp with fftw3 support.
1589##
1590#
1591## Available values: spectrum, wave, wave_filled, ellipse.
1592##
1593visualizer_type = spectrum
1594#
1595#visualizer_look = ●▮
1596visualizer_look = "●•"
1597#
1598#visualizer_color = blue, cyan, green, yellow, magenta, red
1599#
1600## Alternative subset of 256 colors for terminals that support it.
1601##
1602#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1603#
1604##### system encoding #####
1605##
1606## ncmpcpp should detect your charset encoding
1607## but if it failed to do so, you can specify
1608## charset encoding you are using here.
1609##
1610## Note: You can see whether your ncmpcpp build
1611## supports charset detection by checking output
1612## of `ncmpcpp --version`.
1613##
1614## Note: Since MPD uses UTF-8 by default, setting
1615## this option makes sense only if your encoding
1616## is different.
1617##
1618#
1619#system_encoding = ""
1620#
1621##### delays #####
1622#
1623## Time of inactivity (in seconds) after playlist
1624## highlighting will be disabled (0 = always on).
1625##
1626#playlist_disable_highlight_delay = 5
1627#
1628## Defines how long messages are supposed to be visible.
1629##
1630#message_delay_time = 5
1631#
1632##### song format #####
1633##
1634## For a song format you can use:
1635##
1636## %l - length
1637## %f - filename
1638## %D - directory
1639## %a - artist
1640## %A - album artist
1641## %t - title
1642## %b - album
1643## %y - date
1644## %n - track number (01/12 -> 01)
1645## %N - full track info (01/12 -> 01/12)
1646## %g - genre
1647## %c - composer
1648## %p - performer
1649## %d - disc
1650## %C - comment
1651## %P - priority
1652## $R - begin right alignment
1653##
1654## If you want to make sure that a part of the format is displayed
1655## only when certain tags are present, you can archieve it by
1656## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1657## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1658## It is also possible to define a list of alternatives by providing
1659## several groups and separating them with '|', e.g. '{%t}|{%f}'
1660## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1661## present.
1662##
1663## Note: If you want to set limit on maximal length of a tag, just
1664## put the appropriate number between % and character that defines
1665## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1666##
1667## In addition, formats support markers used for text attributes.
1668## They are followed by character '$'. After that you can put:
1669##
1670## - 0 - default window color (discards all other colors)
1671## - 1 - black
1672## - 2 - red
1673## - 3 - green
1674## - 4 - yellow
1675## - 5 - blue
1676## - 6 - magenta
1677## - 7 - cyan
1678## - 8 - white
1679## - 9 - end of current color
1680## - b - bold text
1681## - u - underline text
1682## - r - reverse colors
1683## - a - use alternative character set
1684##
1685## If you don't want to use a non-color attribute anymore, just put it
1686## again, but this time insert character '/' between '$' and attribute
1687## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1688## or filename with reversed colors.
1689##
1690## If you want to use 256 colors and/or background colors in formats
1691## (the naming scheme is described below in section about color
1692## definitions), it can be done with the syntax $(COLOR), e.g. to set
1693## the artist tag to one of the non-standard colors and make it have
1694## yellow background, you need to write $(197_yellow)%a$(end). Note
1695## that for standard colors this is interchangable with attributes
1696## listed above.
1697##
1698## Note: colors can be nested.
1699##
1700#
1701#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1702#
1703#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1704#
1705#song_library_format = {%n - }{%t}|{%f}
1706#
1707#
1708#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1709#
1710#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1711#
1712#now_playing_prefix = $b
1713#
1714#now_playing_suffix = $/b
1715#
1716#browser_playlist_prefix = "$2playlist$9 "
1717#
1718#selected_item_prefix = $6
1719#
1720#selected_item_suffix = $9
1721#
1722#modified_item_prefix = $3> $9
1723#
1724##
1725## Note: attributes are not supported for the following variables.
1726##
1727#song_window_title_format = {%a - }{%t}|{%f}
1728##
1729## Note: Below variables are used for sorting songs in browser.
1730## The sort mode determines how songs are sorted, and can be used
1731## in combination with a sort format to specify a custom sorting format.
1732## Available values for browser_sort_mode are "name", "mtime", "format"
1733## and "noop".
1734##
1735#
1736#browser_sort_mode = name
1737#
1738#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1739#
1740##### columns settings #####
1741##
1742## syntax of song columns list format is "column column etc."
1743##
1744## - syntax for each column is:
1745##
1746## (width of the column)[color of the column]{displayed tag}
1747##
1748## Note: Width is by default in %, if you want a column to
1749## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1750## will be the column that take 10% of screen (so the real width
1751## will depend on actual screen size), whereas (10f)[white]{a}
1752## will take 10 terminal cells, no matter how wide the screen is.
1753##
1754## - color is optional (if you want the default one,
1755## leave the field empty).
1756##
1757## Note: You can give a column additional attributes by putting appropriate
1758## character after displayed tag character. Available attributes are:
1759##
1760## - r - column will be right aligned
1761## - E - if tag is empty, empty tag marker won't be displayed
1762##
1763## You can also:
1764##
1765## - give a column custom name by putting it after attributes,
1766## separated with character ':', e.g. {lr:Length} gives you
1767## right aligned column of lengths named "Length".
1768##
1769## - define sequence of tags, that have to be displayed in case
1770## predecessor is empty in a way similar to the one in classic
1771## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1772## creates column named "Owner" that tries to display artist
1773## tag and then composer and performer if previous ones are
1774## not available.
1775##
1776#
1777#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1778#
1779##### various settings #####
1780#
1781##
1782## Note: Custom command that will be executed each
1783## time song changes. Useful for notifications etc.
1784##
1785#execute_on_song_change = ""
1786#
1787#playlist_show_mpd_host = no
1788#
1789#playlist_show_remaining_time = no
1790#
1791#playlist_shorten_total_times = no
1792#
1793#playlist_separate_albums = no
1794#
1795##
1796## Note: Possible display modes: classic, columns.
1797##
1798#playlist_display_mode = columns
1799#
1800#browser_display_mode = classic
1801#
1802#search_engine_display_mode = classic
1803#
1804#playlist_editor_display_mode = classic
1805#
1806#discard_colors_if_item_is_selected = yes
1807#
1808#incremental_seeking = yes
1809#
1810#seek_time = 1
1811#
1812#volume_change_step = 2
1813#
1814#autocenter_mode = no
1815#
1816#centered_cursor = no
1817#
1818##
1819## Note: You can specify third character which will
1820## be used to build 'empty' part of progressbar.
1821##
1822#progressbar_look = =>
1823progressbar_look = "─╼╶"
1824#progressbar_look = "─⊙╶"
1825#
1826#progressbar_boldness = yes
1827#
1828## Available values: database, playlist.
1829##
1830#default_place_to_search_in = database
1831#
1832## Available values: classic, alternative.
1833##
1834#user_interface = classic
1835#
1836#data_fetching_delay = yes
1837#
1838## Available values: artist, album_artist, date, genre, composer, performer.
1839##
1840#media_library_primary_tag = artist
1841#
1842## Available values: wrapped, normal.
1843##
1844#default_find_mode = wrapped
1845#
1846#default_tag_editor_pattern = %n - %t
1847#
1848#header_visibility = yes
1849#
1850#statusbar_visibility = yes
1851#
1852#titles_visibility = yes
1853#
1854#header_text_scrolling = yes
1855#
1856#cyclic_scrolling = no
1857#
1858#lines_scrolled = 2
1859#
1860#follow_now_playing_lyrics = no
1861#
1862#fetch_lyrics_for_current_song_in_background = no
1863#
1864#store_lyrics_in_song_dir = no
1865#
1866#generate_win32_compatible_filenames = yes
1867#
1868#allow_for_physical_item_deletion = no
1869#
1870##
1871## Note: If you set this variable, ncmpcpp will try to
1872## get info from last.fm in language you set and if it
1873## fails, it will fall back to english. Otherwise it will
1874## use english the first time.
1875##
1876## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1877##
1878#lastfm_preferred_language = en
1879#
1880#show_hidden_files_in_local_browser = no
1881#
1882##
1883## How shall screen switcher work?
1884##
1885## - "previous" - switch between the current and previous screen.
1886## - "screen1,...,screenN" - switch between given sequence of screens.
1887##
1888## Screens available for use: help, playlist, browser, search_engine,
1889## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1890##
1891#screen_switcher_mode = playlist, browser
1892#
1893##
1894## Note: You can define startup screen
1895## by choosing screen from the list above.
1896##
1897#startup_screen = playlist
1898#
1899##
1900## Note: You can define startup slave screen
1901## by choosing screen from the list above or
1902## an empty value for no slave screen.
1903##
1904#startup_slave_screen = ""
1905#
1906#startup_slave_screen_focus = no
1907#
1908##
1909## Default width of locked screen (in %).
1910## Acceptable values are from 20 to 80.
1911##
1912#
1913#locked_screen_width_part = 50
1914#
1915#ask_for_locked_screen_width_part = yes
1916#
1917#jump_to_now_playing_song_at_start = yes
1918#
1919#ask_before_clearing_playlists = yes
1920#
1921#clock_display_seconds = no
1922#
1923#display_volume_level = yes
1924#
1925#display_bitrate = no
1926#
1927#display_remaining_time = no
1928#
1929## Available values: none, basic, extended, perl.
1930##
1931#regular_expressions = perl
1932#
1933##
1934## Note: If below is enabled, ncmpcpp will ignore leading
1935## "The" word while sorting items in browser, tags in
1936## media library, etc.
1937##
1938#ignore_leading_the = no
1939#
1940#block_search_constraints_change_if_items_found = yes
1941#
1942#mouse_support = yes
1943#
1944#mouse_list_scroll_whole_page = yes
1945#
1946#empty_tag_marker = <empty>
1947#
1948#tags_separator = " | "
1949#
1950#tag_editor_extended_numeration = no
1951#
1952#media_library_sort_by_mtime = no
1953#
1954#enable_window_title = yes
1955#
1956##
1957## Note: You can choose default search mode for search
1958## engine. Available modes are:
1959##
1960## - 1 - use mpd built-in searching (no regexes, pattern matching)
1961## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1962## but if your mpd is on a remote machine, downloading big database
1963## to process it can take a while
1964## - 3 - match only exact values (this mode uses mpd function for searching
1965## in database and local one for searching in current playlist)
1966##
1967#
1968#search_engine_default_search_mode = 1
1969#
1970#external_editor = nano
1971#
1972## Note: set to yes if external editor is a console application.
1973##
1974#use_console_editor = yes
1975#
1976##### colors definitions #####
1977##
1978## It is possible to set a background color by setting a color
1979## value "<foreground>_<background>", e.g. red_black will set
1980## foregound color to red and background color to black.
1981##
1982## In addition, for terminals that support 256 colors it
1983## is possible to set one of them by using a number in range
1984## [1, 256] instead of color name, e.g. numerical value
1985## corresponding to red_black is 2_1. To find out if the
1986## terminal supports 256 colors, run ncmpcpp and check out
1987## the bottom of the help screen for list of available colors
1988## and their numerical values.
1989##
1990## Note: due to technical limitations of ncurses, if 256 colors
1991## are used, it is possible to either use only the colors with
1992## default background color, or all pairs from 1_1 up to 254_127,
1993## depending on the ncurses version used.
1994##
1995#
1996#colors_enabled = yes
1997#
1998#empty_tag_color = cyan
1999#
2000#header_window_color = default
2001#
2002#volume_color = default
2003#
2004#state_line_color = default
2005#
2006#state_flags_color = default
2007#
2008#main_window_color = yellow
2009#
2010#color1 = white
2011#
2012#color2 = green
2013#
2014#main_window_highlight_color = yellow
2015#
2016#progressbar_color = black
2017#
2018#progressbar_elapsed_color = green
2019#
2020#statusbar_color = default
2021#
2022#alternative_ui_separator_color = black
2023#
2024#active_column_color = red
2025#
2026#window_border_color = green
2027#
2028#active_window_border = red
2029#
2030#+end_src
2031
2032*** bindings
2033:PROPERTIES:
2034:header-args+: :tangle ~/.ncmpcpp/bindings
2035:END:
2036
2037#+begin_src conf :tangle no
2038def_key "j"
2039 scroll_down
2040def_key "k"
2041 scroll_up
2042
2043def_key "ctrl-u"
2044 page_up
2045def_key "ctrl-d"
2046 page_down
2047
2048def_key "h"
2049 previous_column
2050def_key "l"
2051 next_column
2052
2053def_key "."
2054 show_lyrics
2055
2056def_key "n"
2057 next_found_item
2058def_key "N"
2059 previous_found_item
2060
2061def_key "J"
2062 move_sort_order_down
2063def_key "K"
2064 move_sort_order_up
2065#+end_src
2066
2067** notmuch
2068
2069*** notmuch-config
2070:PROPERTIES:
2071:header-args+: :tangle ~/.notmuch-config
2072:END:
2073
2074#+begin_src conf
2075# .notmuch-config - Configuration file for the notmuch mail system
2076#
2077# For more information about notmuch, see https://notmuchmail.org
2078
2079# Database configuration
2080#
2081# The only value supported here is 'path' which should be the top-level
2082# directory where your mail currently exists and to where mail will be
2083# delivered in the future. Files should be individual email messages.
2084# Notmuch will store its database within a sub-directory of the path
2085# configured here named ".notmuch".
2086#
2087[database]
2088path=/home/amin/mail
2089
2090# User configuration
2091#
2092# Here is where you can let notmuch know how you would like to be
2093# addressed. Valid settings are
2094#
2095# name Your full name.
2096# primary_email Your primary email address.
2097# other_email A list (separated by ';') of other email addresses
2098# at which you receive email.
2099#
2100# Notmuch will use the various email addresses configured here when
2101# formatting replies. It will avoid including your own addresses in the
2102# recipient list of replies, and will set the From address based on the
2103# address to which the original email was addressed.
2104#
2105[user]
2106name=Amin Bandali
2107primary_email=amin@aminb.org
2108other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
2109
2110# Configuration for "notmuch new"
2111#
2112# The following options are supported here:
2113#
2114# tags A list (separated by ';') of the tags that will be
2115# added to all messages incorporated by "notmuch new".
2116#
2117# ignore A list (separated by ';') of file and directory names
2118# that will not be searched for messages by "notmuch new".
2119#
2120# NOTE: *Every* file/directory that goes by one of those
2121# names will be ignored, independent of its depth/location
2122# in the mail store.
2123#
2124[new]
2125tags=new;
2126#tags=unread;inbox;
2127ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2128
2129# Search configuration
2130#
2131# The following option is supported here:
2132#
2133# exclude_tags
2134# A ;-separated list of tags that will be excluded from
2135# search results by default. Using an excluded tag in a
2136# query will override that exclusion.
2137#
2138[search]
2139exclude_tags=deleted;spam;
2140
2141# Maildir compatibility configuration
2142#
2143# The following option is supported here:
2144#
2145# synchronize_flags Valid values are true and false.
2146#
2147# If true, then the following maildir flags (in message filenames)
2148# will be synchronized with the corresponding notmuch tags:
2149#
2150# Flag Tag
2151# ---- -------
2152# D draft
2153# F flagged
2154# P passed
2155# R replied
2156# S unread (added when 'S' flag is not present)
2157#
2158# The "notmuch new" command will notice flag changes in filenames
2159# and update tags, while the "notmuch tag" and "notmuch restore"
2160# commands will notice tag changes and update flags in filenames
2161#
2162[maildir]
2163synchronize_flags=true
2164
2165# Cryptography related configuration
2166#
2167# The following option is supported here:
2168#
2169# gpg_path
2170# binary name or full path to invoke gpg.
2171#
2172[crypto]
2173gpg_path=gpg
2174#+end_src
2175
2176*** pre-new hook
2177:PROPERTIES:
2178:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2179:END:
2180
2181#+begin_src sh
2182touch /tmp/gnusieve.log
2183sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2184 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2185#+end_src
2186
2187*** post-new hook
2188:PROPERTIES:
2189:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2190:END:
2191
2192#+begin_src sh
2193# apply sent tag to messages sent by me
2194notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca
2195
2196# initial tagging
2197notmuch tag -latest -- tag:latest
2198notmuch tag +inbox +unread +latest -new -- tag:new
2199
2200
2201# apply tags to lists
2202
2203# <aminb>
2204notmuch tag -inbox +lists/~sircmpwn/srht-admins -- folder:amin/lists/~sircmpwn/srht-admins
2205notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
2206notmuch tag -inbox +lists/~sircmpwn/srht-dev -- folder:amin/lists/~sircmpwn/srht-dev
2207notmuch tag -inbox +lists/~sircmpwn/srht-discuss -- folder:amin/lists/~sircmpwn/srht-discuss
2208
2209notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2210notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2211
2212notmuch tag -inbox +pay -- folder:amin/pay
2213# </aminb>
2214
2215# <uw>
2216notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2217notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2218
2219notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2220notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2221notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2222notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2223notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2224# </uw>
2225
2226# <gnu>
2227notmuch tag -inbox +lists/emacs-devel -- folder:gnu/l/emacs-devel
2228notmuch tag -inbox +lists/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2229notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2230notmuch tag -inbox +lists/fencepost-users -- folder:gnu/l/fencepost-users
2231notmuch tag -inbox +lists/guix-devel -- folder:gnu/l/guix-devel
2232notmuch tag -inbox +lists/guile-devel -- folder:gnu/l/guile-devel
2233notmuch tag -inbox +lists/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2234notmuch tag -inbox +lists/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2235notmuch tag -inbox +lists/www-commits -- folder:gnu/l/www-commits
2236notmuch tag -inbox +lists/www-discuss -- folder:gnu/l/www-discuss
2237notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2238
2239notmuch tag -inbox +lists/deepspec -- folder:gnu/l/deepspec
2240notmuch tag -inbox +lists/haskell-cafe -- folder:gnu/l/haskell-cafe
2241notmuch tag -inbox +lists/haskell-art -- folder:gnu/l/haskell-art
2242notmuch tag -inbox +lists/notmuch -- folder:gnu/l/notmuch
2243# </gnu>
2244
2245notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2246notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2247#+end_src
2248
2249*** notmuch.service
2250:PROPERTIES:
2251:header-args+: :tangle ~/.config/systemd/user/notmuch.service
2252:END:
2253
2254#+begin_src conf :tangle no
2255[Unit]
2256Description=notmuch service
2257
2258[Service]
2259Type=oneshot
2260ExecStart=/usr/bin/notmuch new
2261StandardOutput=syslog
2262StandardError=syslog
2263#+end_src
2264
2265*** notmuch.timer
2266:PROPERTIES:
2267:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2268:END:
2269
2270#+begin_src conf :tangle no
2271[Unit]
2272Description=notmuch timer
2273
2274[Timer]
2275OnCalendar=*:0/5
2276Persistent=true
2277Unit=notmuch.service
2278
2279[Install]
2280WantedBy=timers.target
2281#+end_src
2282
2283** offlineimap
2284
2285*** offlineimaprc
2286:PROPERTIES:
2287:header-args+: :tangle ~/.offlineimaprc
2288:END:
2289
2290#+begin_src conf :tangle no
2291[general]
2292pythonfile = ~/.offlineimap.py
2293accounts = Gmail, aminb
2294maxsyncaccounts = 3
2295
2296[Account Gmail]
2297localrepository = GmailL
2298remoterepository = GmailR
2299
2300[Account aminb]
2301localrepository = aminbL
2302remoterepository = aminbR
2303
2304[Repository GmailL]
2305type = Maildir
2306localfolders = ~/Maildir/Gmail
2307
2308[Repository GmailR]
2309type = IMAP
2310remotehost = imap.gmail.com
2311remoteusereval = mailuser("gmail")
2312remotepasseval = mailpasswd("gmail")
2313sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2314ssl = yes
2315folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2316maxconnections = 1
2317realdelete = no
2318
2319[Repository aminbL]
2320type = Maildir
2321localfolders = ~/Maildir/aminb
2322
2323[Repository aminbR]
2324type = IMAP
2325remotehost = mail.aminb.org
2326remoteusereval = mailuser("aminb")
2327remotepasseval = mailpasswd("aminb")
2328sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2329ssl = yes
2330folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2331maxconnections = 1
2332realdelete = no
2333#+end_src
2334
2335*** offlineimap.py
2336:PROPERTIES:
2337:header-args+: :tangle ~/.offlineimap.py
2338:END:
2339
2340#+begin_src python :tangle no
2341import os
2342import subprocess
2343
2344def mailpasswd(acct):
2345 acct = os.path.basename(acct)
2346 path = "/home/amin/.passwd/%s.gpg" % acct
2347 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2348 try:
2349 return subprocess.check_output(args).strip()
2350 except subprocess.CalledProcessError:
2351 return ""
2352
2353def mailuser(acct):
2354 acct = os.path.basename(acct)
2355 path = "/home/amin/.passwd/%s" % acct
2356 args = ["cat", path]
2357 try:
2358 return subprocess.check_output(args).strip()
2359 except subprocess.CalledProcessError:
2360 return ""
2361
2362def prime_gpg_agent():
2363 ret = False
2364 i = 1
2365 while not ret:
2366 ret = (mailpasswd("prime") == "prime")
2367 if i > 2:
2368 from offlineimap.ui import getglobalui
2369 sys.stderr.write("Error reading in passwords. Terminating.\n")
2370 getglobalui().terminate()
2371 i += 1
2372 return ret
2373
2374prime_gpg_agent()
2375#+end_src
2376
2377** pigeonhole
2378*** gnu.sieve
2379:PROPERTIES:
2380:header-args+: :tangle ~/sieve/gnu.sieve :comments none
2381:END:
2382
2383#+begin_src conf
2384require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2385
2386if anyof (
2387 address :is "from" "webmasters@gnu.org",
2388 address :is "from" "webmasters-comment@gnu.org") {
2389 fileinto :create "webmasters";
2390 stop;
2391}
2392
2393include :personal "lists";
2394#+end_src
2395
2396*** lists.sieve
2397:PROPERTIES:
2398:header-args+: :tangle ~/sieve/lists.sieve :comments none
2399:END:
2400
2401#+begin_src conf
2402require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2403 "include" ];
2404
2405if anyof (
2406 header :contains "list-id" "<emacs-devel.gnu.org>",
2407 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2408 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2409 header :contains "list-id" "<fencepost-users.gnu.org>",
2410 header :contains "list-id" "<guix-devel.gnu.org>",
2411 header :contains "list-id" "<guile-devel.gnu.org>",
2412 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2413 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2414 header :contains "list-id" "<www-commits.gnu.org>",
2415 header :contains "list-id" "<www-discuss.gnu.org>",
2416 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2417 header :contains "list-id" "<haskell-cafe.haskell.org>",
2418 header :contains "list-id" "<haskell-art.we.lurk.org>",
2419 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2420 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2421 set :lower "listname" "${1}";
2422 fileinto :create "l/${listname}";
2423 }
2424}
2425#+end_src
2426
2427** polybar
2428
2429*** config
2430:PROPERTIES:
2431:header-args+: :tangle ~/.config/polybar/config
2432:END:
2433
2434#+begin_src conf :tangle no
2435;=====================================================
2436;
2437; To learn more about how to configure Polybar
2438; go to https://github.com/jaagr/polybar
2439;
2440; The README contains alot of information
2441;
2442;=====================================================
2443
2444[colors]
2445;background = ${xrdb:color0:#222}
2446background = #222
2447background-alt = #444
2448;foreground = ${xrdb:color7:#222}
2449foreground = #eee
2450foreground-alt = #888
2451primary = #ffb52a
2452secondary = #e60053
2453alert = #bd2c40
2454
2455[bar/main]
2456;monitor = ${env:MONITOR:HDMI-1}
2457width = 100%
2458height = 27
2459;offset-x = 1%
2460;offset-y = 1%
2461radius = 3.0
2462fixed-center = true
2463
2464background = ${colors.background}
2465foreground = ${colors.foreground}
2466
2467line-size = 3
2468line-color = #f00
2469
2470border-size = 4
2471border-color = #00000000
2472
2473padding-left = 0
2474padding-right = 2
2475
2476module-margin-left = 2
2477module-margin-right = 2
2478
2479font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2480font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2481font-2 = Wuncon Siji:pixelsize=10;1
2482font-3 = FontAwesome:pixelsize=10;1
2483
2484modules-left = bspwm xwindow
2485modules-center =
2486modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2487
2488tray-position = right
2489tray-padding = 1
2490;tray-transparent = true
2491;tray-background = #0063ff
2492tray-maxsize = 18
2493
2494wm-restack = bspwm
2495
2496;override-redirect = true
2497
2498scroll-up = bspwm-desknext
2499scroll-down = bspwm-deskprev
2500
2501[module/xwindow]
2502type = internal/xwindow
2503label = %title:0:50:...%
2504
2505[module/xkeyboard]
2506type = internal/xkeyboard
2507blacklist-0 = num lock
2508
2509format-prefix = " "
2510format-prefix-foreground = ${colors.foreground-alt}
2511format-prefix-underline = ${colors.secondary}
2512
2513label-layout = %layout%
2514label-layout-underline = ${colors.secondary}
2515
2516label-indicator-padding = 2
2517label-indicator-margin = 1
2518label-indicator-background = ${colors.secondary}
2519label-indicator-underline = ${colors.secondary}
2520
2521[module/filesystem]
2522type = internal/fs
2523interval = 25
2524
2525mount-0 = /
2526
2527label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2528label-unmounted = %mountpoint% not mounted
2529label-unmounted-foreground = ${colors.foreground-alt}
2530
2531[module/bspwm]
2532type = internal/bspwm
2533
2534label-focused = %index%
2535label-focused-background = ${colors.background-alt}
2536label-focused-underline= ${colors.primary}
2537label-focused-padding = 2
2538
2539label-occupied = %index%
2540label-occupied-padding = 2
2541
2542label-urgent = %index%!
2543label-urgent-background = ${colors.alert}
2544label-urgent-padding = 2
2545
2546label-empty = %index%
2547label-empty-foreground = ${colors.foreground-alt}
2548label-empty-padding = 2
2549
2550[module/i3]
2551type = internal/i3
2552format = <label-state> <label-mode>
2553index-sort = true
2554wrapping-scroll = false
2555
2556; Only show workspaces on the same output as the bar
2557;pin-workspaces = true
2558
2559label-mode-padding = 2
2560label-mode-foreground = #000
2561label-mode-background = ${colors.primary}
2562
2563; focused = Active workspace on focused monitor
2564label-focused = %index%
2565label-focused-background = ${module/bspwm.label-focused-background}
2566label-focused-underline = ${module/bspwm.label-focused-underline}
2567label-focused-padding = ${module/bspwm.label-focused-padding}
2568
2569; unfocused = Inactive workspace on any monitor
2570label-unfocused = %index%
2571label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2572
2573; visible = Active workspace on unfocused monitor
2574label-visible = %index%
2575label-visible-background = ${self.label-focused-background}
2576label-visible-underline = ${self.label-focused-underline}
2577label-visible-padding = ${self.label-focused-padding}
2578
2579; urgent = Workspace with urgency hint set
2580label-urgent = %index%
2581label-urgent-background = ${module/bspwm.label-urgent-background}
2582label-urgent-padding = ${module/bspwm.label-urgent-padding}
2583
2584[module/mpd]
2585type = internal/mpd
2586format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2587
2588icon-prev = 
2589icon-stop = 
2590icon-play = 
2591icon-pause = 
2592icon-next = 
2593
2594label-song-maxlen = 25
2595label-song-ellipsis = true
2596
2597[module/xbacklight]
2598type = internal/xbacklight
2599
2600format = <label> <bar>
2601label = BL
2602
2603bar-width = 10
2604bar-indicator = |
2605bar-indicator-foreground = #ff
2606bar-indicator-font = 2
2607bar-fill = ─
2608bar-fill-font = 2
2609bar-fill-foreground = #9f78e1
2610bar-empty = ─
2611bar-empty-font = 2
2612bar-empty-foreground = ${colors.foreground-alt}
2613
2614[module/backlight-acpi]
2615inherit = module/xbacklight
2616type = internal/backlight
2617;card = intel_backlight
2618card = mba6x_backlight
2619
2620[module/cpu]
2621type = internal/cpu
2622interval = 2
2623format-prefix = " "
2624format-prefix-foreground = ${colors.foreground-alt}
2625format-underline = #f90000
2626label = %percentage%%
2627
2628[module/memory]
2629type = internal/memory
2630interval = 2
2631format-prefix = " "
2632format-prefix-foreground = ${colors.foreground-alt}
2633format-underline = #4bffdc
2634label = %percentage_used%%
2635
2636[module/wlan]
2637type = internal/network
2638interface =
2639interval = 3.0
2640
2641format-connected = <ramp-signal> <label-connected>
2642format-connected-underline = #9f78e1
2643label-connected = %essid%
2644
2645format-disconnected =
2646;format-disconnected = <label-disconnected>
2647;format-disconnected-underline = ${self.format-connected-underline}
2648;label-disconnected = %ifname% disconnected
2649;label-disconnected-foreground = ${colors.foreground-alt}
2650
2651ramp-signal-0 = 
2652ramp-signal-1 = 
2653ramp-signal-2 = 
2654ramp-signal-3 = 
2655ramp-signal-4 = 
2656ramp-signal-foreground = ${colors.foreground-alt}
2657
2658[module/eth]
2659type = internal/network
2660interface =
2661interval = 3.0
2662
2663format-connected-underline = #55aa55
2664format-connected-prefix = " "
2665format-connected-prefix-foreground = ${colors.foreground-alt}
2666label-connected = %local_ip%
2667
2668format-disconnected =
2669;format-disconnected = <label-disconnected>
2670;format-disconnected-underline = ${self.format-connected-underline}
2671;label-disconnected = %ifname% disconnected
2672;label-disconnected-foreground = ${colors.foreground-alt}
2673
2674[module/date]
2675type = internal/date
2676interval = 5
2677
2678date =
2679date-alt = " %Y-%m-%d"
2680
2681time = %H:%M
2682time-alt = %H:%M:%S
2683
2684format-prefix = 
2685format-prefix-foreground = ${colors.foreground-alt}
2686format-underline = #0a6cf5
2687
2688label = %date% %time%
2689
2690[module/volume]
2691type = internal/volume
2692
2693format-volume = <label-volume> <bar-volume>
2694label-volume = vol
2695label-volume-foreground = ${root.foreground}
2696
2697format-muted-prefix = " "
2698format-muted-foreground = ${colors.foreground-alt}
2699label-muted = mute
2700
2701bar-volume-width = 10
2702bar-volume-foreground-0 = #55aa55
2703bar-volume-foreground-1 = #55aa55
2704bar-volume-foreground-2 = #55aa55
2705bar-volume-foreground-3 = #55aa55
2706bar-volume-foreground-4 = #55aa55
2707bar-volume-foreground-5 = #f5a70a
2708bar-volume-foreground-6 = #ff5555
2709bar-volume-gradient = false
2710bar-volume-indicator = |
2711bar-volume-indicator-font = 2
2712bar-volume-fill = ─
2713bar-volume-fill-font = 2
2714bar-volume-empty = ─
2715bar-volume-empty-font = 2
2716bar-volume-empty-foreground = ${colors.foreground-alt}
2717
2718[module/battery]
2719type = internal/battery
2720battery = BAT0
2721adapter = ADP1
2722full-at = 64
2723
2724format-charging = <animation-charging> <label-charging>
2725format-charging-underline = #ffb52a
2726
2727format-discharging = <ramp-capacity> <label-discharging>
2728format-discharging-underline = ${self.format-charging-underline}
2729
2730format-full-prefix = " "
2731format-full-prefix-foreground = ${colors.foreground-alt}
2732format-full-underline = ${self.format-charging-underline}
2733
2734ramp-capacity-0 = 
2735ramp-capacity-1 = 
2736ramp-capacity-2 = 
2737ramp-capacity-foreground = ${colors.foreground-alt}
2738
2739animation-charging-0 = 
2740animation-charging-1 = 
2741animation-charging-2 = 
2742animation-charging-foreground = ${colors.foreground-alt}
2743animation-charging-framerate = 750
2744
2745[module/temperature]
2746type = internal/temperature
2747thermal-zone = 1
2748warn-temperature = 66
2749
2750format = <ramp> <label>
2751format-underline = #f50a4d
2752format-warn = <ramp> <label-warn>
2753format-warn-underline = ${self.format-underline}
2754
2755label = %temperature%
2756label-warn = %temperature%
2757label-warn-foreground = ${colors.secondary}
2758
2759ramp-0 = 
2760ramp-1 = 
2761ramp-2 = 
2762ramp-foreground = ${colors.foreground-alt}
2763
2764[module/powermenu]
2765type = custom/menu
2766
2767format-spacing = 1
2768
2769label-open = 
2770label-open-foreground = ${colors.secondary}
2771label-close =  cancel
2772label-close-foreground = ${colors.secondary}
2773label-separator = |
2774label-separator-foreground = ${colors.foreground-alt}
2775
2776menu-0-0 = reboot
2777menu-0-0-exec = menu-open-1
2778menu-0-1 = power off
2779menu-0-1-exec = menu-open-2
2780
2781menu-1-0 = cancel
2782menu-1-0-exec = menu-open-0
2783menu-1-1 = reboot
2784menu-1-1-exec = sudo reboot
2785
2786menu-2-0 = power off
2787menu-2-0-exec = sudo poweroff
2788menu-2-1 = cancel
2789menu-2-1-exec = menu-open-0
2790
2791[module/mail]
2792type = custom/script
2793interval = 60
2794format = <label>
2795format-prefix = " "
2796format-prefix-foreground = ${colors.foreground-alt}
2797format-underline = #0a6cf5
2798exec = notmuch count tag:unread
2799
2800[settings]
2801screenchange-reload = true
2802;compositing-background = xor
2803;compositing-background = screen
2804;compositing-foreground = source
2805;compositing-border = over
2806
2807[global/wm]
2808margin-top = 0
2809margin-bottom = 0
2810
2811; vim:ft=dosini
2812#+end_src
2813
2814*** polybar-launch
2815:PROPERTIES:
2816:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2817:END:
2818
2819#+begin_src sh :tangle no
2820# Terminate already running bar instances
2821killall -q polybar
2822
2823# Wait until the processes have been shut down
2824while pgrep -x polybar >/dev/null; do sleep 1; done
2825
2826# Launch main bar
2827polybar main &
2828
2829echo "Bars launched..."
2830#+end_src
2831
2832** PowerTOP
2833:PROPERTIES:
2834:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2835:END:
2836
2837#+begin_src conf
2838[Unit]
2839Description=Powertop tunings
2840
2841[Service]
2842ExecStart=/usr/bin/powertop --auto-tune
2843RemainAfterExit=true
2844
2845[Install]
2846WantedBy=multi-user.target
2847#+end_src
2848
2849** ranger
2850
2851*** rc.conf
2852:PROPERTIES:
2853:header-args+: :tangle ~/.config/ranger/rc.conf
2854:END:
2855
2856#+begin_src conf :tangle no
2857# ===================================================================
2858# This file contains the default startup commands for ranger.
2859# To change them, it is recommended to create the file
2860# ~/.config/ranger/rc.conf and add your custom commands there.
2861#
2862# If you copy this whole file there, you may want to set the environment
2863# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2864#
2865# The purpose of this file is mainly to define keybindings and settings.
2866# For running more complex python code, please create a plugin in "plugins/" or
2867# a command in "commands.py".
2868#
2869# Each line is a command that will be run before the user interface
2870# is initialized. As a result, you can not use commands which rely
2871# on the UI such as :delete or :mark.
2872# ===================================================================
2873
2874# ===================================================================
2875# == Options
2876# ===================================================================
2877
2878# How many columns are there, and what are their relative widths?
2879set column_ratios 1,3,4
2880
2881# Which files should be hidden? (regular expression)
2882set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2883
2884# Show hidden files? You can toggle this by typing 'zh'
2885set show_hidden false
2886
2887# Ask for a confirmation when running the "delete" command?
2888# Valid values are "always" (default), "never", "multiple"
2889# With "multiple", ranger will ask only if you delete multiple files at once.
2890set confirm_on_delete multiple
2891
2892# Which script is used to generate file previews?
2893# ranger ships with scope.sh, a script that calls external programs (see
2894# README for dependencies) to preview images, archives, etc.
2895set preview_script ~/.config/ranger/scope.sh
2896
2897# Use the external preview script or display simple plain text previews?
2898set use_preview_script true
2899
2900# Open all images in this directory when running certain image viewers
2901# like feh or sxiv? You can still open selected files by marking them.
2902set open_all_images true
2903
2904# Be aware of version control systems and display information.
2905set vcs_aware false
2906
2907# State of the three backends git, hg, bzr. The possible states are
2908# disabled, local (only show local info), enabled (show local and remote
2909# information).
2910set vcs_backend_git enabled
2911set vcs_backend_hg disabled
2912set vcs_backend_bzr disabled
2913
2914# Preview images in full color with the external command "w3mimgpreview"?
2915# This requires the console web browser "w3m" and a supported terminal.
2916# It has been successfully tested with "xterm" and "urxvt" without tmux.
2917set preview_images true
2918
2919# Use a unicode "..." character to mark cut-off filenames?
2920set unicode_ellipsis false
2921
2922# Show dotfiles in the bookmark preview box?
2923set show_hidden_bookmarks true
2924
2925# Which colorscheme to use? These colorschemes are available by default:
2926# default, jungle, snow
2927set colorscheme default
2928
2929# Preview files on the rightmost column?
2930# And collapse (shrink) the last column if there is nothing to preview?
2931set preview_files true
2932set preview_directories true
2933set collapse_preview true
2934
2935# Save the console history on exit?
2936set save_console_history true
2937
2938# Draw the status bar on top of the browser window (default: bottom)
2939set status_bar_on_top false
2940
2941# Draw a progress bar in the status bar which displays the average state of all
2942# currently running tasks which support progress bars?
2943set draw_progress_bar_in_status_bar true
2944
2945# Draw borders around columns?
2946set draw_borders true
2947
2948# Display the directory name in tabs?
2949set dirname_in_tabs false
2950
2951# Enable the mouse support?
2952set mouse_enabled true
2953
2954# Display the file size in the main column or status bar?
2955set display_size_in_main_column true
2956set display_size_in_status_bar true
2957
2958# Display files tags in all columns or only in main column?
2959set display_tags_in_all_columns true
2960
2961# Set a title for the window?
2962set update_title false
2963
2964# Set the title to "ranger" in the tmux program?
2965set update_tmux_title false
2966
2967# Shorten the title if it gets long? The number defines how many
2968# directories are displayed at once, 0 turns off this feature.
2969set shorten_title 3
2970
2971# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2972set tilde_in_titlebar false
2973
2974# How many directory-changes or console-commands should be kept in history?
2975set max_history_size 20
2976set max_console_history_size 50
2977
2978# Try to keep so much space between the top/bottom border when scrolling:
2979set scroll_offset 8
2980
2981# Flush the input after each key hit? (Noticable when ranger lags)
2982set flushinput true
2983
2984# Padding on the right when there's no preview?
2985# This allows you to click into the space to run the file.
2986set padding_right true
2987
2988# Save bookmarks (used with mX and `X) instantly?
2989# This helps to synchronize bookmarks between multiple ranger
2990# instances but leads to *slight* performance loss.
2991# When false, bookmarks are saved when ranger is exited.
2992set autosave_bookmarks true
2993
2994# You can display the "real" cumulative size of directories by using the
2995# command :get_cumulative_size or typing "dc". The size is expensive to
2996# calculate and will not be updated automatically. You can choose
2997# to update it automatically though by turning on this option:
2998set autoupdate_cumulative_size false
2999
3000# Turning this on makes sense for screen readers:
3001set show_cursor false
3002
3003# One of: size, basename, mtime, type
3004set sort natural
3005
3006# Additional sorting options
3007set sort_reverse false
3008set sort_case_insensitive true
3009set sort_directories_first true
3010
3011# Enable this if key combinations with the Alt Key don't work for you.
3012# (Especially on xterm)
3013set xterm_alt_key false
3014
3015# ===================================================================
3016# == Local Options
3017# ===================================================================
3018# You can set local options that only affect a single directory.
3019
3020# Examples:
3021# setlocal path=~/downloads sort mtime
3022
3023# ===================================================================
3024# == Command Aliases in the Console
3025# ===================================================================
3026
3027alias e edit
3028alias q quit
3029alias q! quitall
3030alias qall quitall
3031alias setl setlocal
3032
3033alias filter scout -prt
3034alias find scout -aet
3035alias mark scout -mr
3036alias unmark scout -Mr
3037alias search scout -rs
3038alias search_inc scout -rts
3039alias travel scout -aefiklst
3040
3041# ===================================================================
3042# == Define keys for the browser
3043# ===================================================================
3044
3045# Basic
3046map Q quit!
3047map q quit
3048copymap q ZZ ZQ
3049
3050map R reload_cwd
3051map <C-r> reset
3052map <C-l> redraw_window
3053map <C-c> abort
3054map <esc> change_mode normal
3055
3056map i display_file
3057map ? help
3058map W display_log
3059map w taskview_open
3060map S shell $SHELL
3061
3062map : console
3063map ; console
3064map ! console shell
3065map @ console -p6 shell %%s
3066map # console shell -p
3067map s console shell
3068map r chain draw_possible_programs; console open_with
3069map f console find
3070map cd console cd
3071
3072# Tagging / Marking
3073map t tag_toggle
3074map ut tag_remove
3075map "<any> tag_toggle tag=%any
3076map <Space> mark_files toggle=True
3077map v mark_files all=True toggle=True
3078map uv mark_files all=True val=False
3079map V toggle_visual_mode
3080map uV toggle_visual_mode reverse=True
3081
3082# For the nostalgics: Midnight Commander bindings
3083map <F1> help
3084map <F3> display_file
3085map <F4> edit
3086map <F5> copy
3087map <F6> cut
3088map <F7> console mkdir
3089map <F8> console delete
3090map <F10> exit
3091
3092# In case you work on a keyboard with dvorak layout
3093map <UP> move up=1
3094map <DOWN> move down=1
3095map <LEFT> move left=1
3096map <RIGHT> move right=1
3097map <HOME> move to=0
3098map <END> move to=-1
3099map <PAGEDOWN> move down=1 pages=True
3100map <PAGEUP> move up=1 pages=True
3101map <CR> move right=1
3102map <DELETE> console delete
3103map <INSERT> console touch
3104
3105# VIM-like
3106copymap <UP> k
3107copymap <DOWN> j
3108copymap <LEFT> h
3109copymap <RIGHT> l
3110copymap <HOME> gg
3111copymap <END> G
3112copymap <PAGEDOWN> <C-F>
3113copymap <PAGEUP> <C-B>
3114
3115map J move down=0.5 pages=True
3116map K move up=0.5 pages=True
3117copymap J <C-D>
3118copymap K <C-U>
3119
3120# Jumping around
3121map H history_go -1
3122map L history_go 1
3123map ] move_parent 1
3124map [ move_parent -1
3125map } traverse
3126
3127map gh cd ~
3128map ge cd /etc
3129map gu cd /usr
3130map gd cd /dev
3131map gl cd -r .
3132map gL cd -r %f
3133map go cd /opt
3134map gv cd /var
3135map gm cd /media
3136map gM cd /mnt
3137map gs cd /srv
3138map gr cd /
3139map gR eval fm.cd(ranger.RANGERDIR)
3140map g/ cd /
3141map g? cd /usr/share/doc/ranger
3142
3143# External Programs
3144map E edit
3145map du shell -p du --max-depth=1 -h --apparent-size
3146map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3147map yp shell -d echo -n %d/%f | xsel -i
3148map yd shell -d echo -n %d | xsel -i
3149map yn shell -d echo -n %f | xsel -i
3150
3151# Filesystem Operations
3152map = chmod
3153
3154map cw console rename
3155map A eval fm.open_console('rename ' + fm.thisfile.basename)
3156map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3157
3158map pp paste
3159map po paste overwrite=True
3160map pl paste_symlink relative=False
3161map pL paste_symlink relative=True
3162map phl paste_hardlink
3163map pht paste_hardlinked_subtree
3164
3165map dd cut
3166map ud uncut
3167map da cut mode=add
3168map dr cut mode=remove
3169
3170map yy copy
3171map uy uncut
3172map ya copy mode=add
3173map yr copy mode=remove
3174
3175# Temporary workarounds
3176map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3177map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3178map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3179map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3180map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3181map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3182map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3183map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3184
3185# Searching
3186map / console search
3187map n search_next
3188map N search_next forward=False
3189map ct search_next order=tag
3190map cs search_next order=size
3191map ci search_next order=mimetype
3192map cc search_next order=ctime
3193map cm search_next order=mtime
3194map ca search_next order=atime
3195
3196# Tabs
3197map <C-n> tab_new ~
3198map <C-w> tab_close
3199map <TAB> tab_move 1
3200map <S-TAB> tab_move -1
3201map <A-Right> tab_move 1
3202map <A-Left> tab_move -1
3203map gt tab_move 1
3204map gT tab_move -1
3205map gn tab_new ~
3206map gc tab_close
3207map uq tab_restore
3208map <a-1> tab_open 1
3209map <a-2> tab_open 2
3210map <a-3> tab_open 3
3211map <a-4> tab_open 4
3212map <a-5> tab_open 5
3213map <a-6> tab_open 6
3214map <a-7> tab_open 7
3215map <a-8> tab_open 8
3216map <a-9> tab_open 9
3217
3218# Sorting
3219map or toggle_option sort_reverse
3220map os chain set sort=size; set sort_reverse=False
3221map ob chain set sort=basename; set sort_reverse=False
3222map on chain set sort=natural; set sort_reverse=False
3223map om chain set sort=mtime; set sort_reverse=False
3224map oc chain set sort=ctime; set sort_reverse=False
3225map oa chain set sort=atime; set sort_reverse=False
3226map ot chain set sort=type; set sort_reverse=False
3227
3228map oS chain set sort=size; set sort_reverse=True
3229map oB chain set sort=basename; set sort_reverse=True
3230map oN chain set sort=natural; set sort_reverse=True
3231map oM chain set sort=mtime; set sort_reverse=True
3232map oC chain set sort=ctime; set sort_reverse=True
3233map oA chain set sort=atime; set sort_reverse=True
3234map oT chain set sort=type; set sort_reverse=True
3235
3236map dc get_cumulative_size
3237
3238# Settings
3239map zc toggle_option collapse_preview
3240map zd toggle_option sort_directories_first
3241map zh toggle_option show_hidden
3242map <C-h> toggle_option show_hidden
3243map zi toggle_option flushinput
3244map zm toggle_option mouse_enabled
3245map zp toggle_option preview_files
3246map zP toggle_option preview_directories
3247map zs toggle_option sort_case_insensitive
3248map zu toggle_option autoupdate_cumulative_size
3249map zv toggle_option use_preview_script
3250map zf console filter
3251
3252# Bookmarks
3253map `<any> enter_bookmark %any
3254map '<any> enter_bookmark %any
3255map m<any> set_bookmark %any
3256map um<any> unset_bookmark %any
3257
3258map m<bg> draw_bookmarks
3259copymap m<bg> um<bg> `<bg> '<bg>
3260
3261# Generate all the chmod bindings with some python help:
3262eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3263eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3264eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3265eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3266eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3267
3268eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3269eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3270eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3271eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3272eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3273
3274# ===================================================================
3275# == Define keys for the console
3276# ===================================================================
3277# Note: Unmapped keys are passed directly to the console.
3278
3279# Basic
3280cmap <tab> eval fm.ui.console.tab()
3281cmap <s-tab> eval fm.ui.console.tab(-1)
3282cmap <ESC> eval fm.ui.console.close()
3283cmap <CR> eval fm.ui.console.execute()
3284cmap <C-l> redraw_window
3285
3286copycmap <ESC> <C-c>
3287copycmap <CR> <C-j>
3288
3289# Move around
3290cmap <up> eval fm.ui.console.history_move(-1)
3291cmap <down> eval fm.ui.console.history_move(1)
3292cmap <left> eval fm.ui.console.move(left=1)
3293cmap <right> eval fm.ui.console.move(right=1)
3294cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3295cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3296
3297# Line Editing
3298cmap <backspace> eval fm.ui.console.delete(-1)
3299cmap <delete> eval fm.ui.console.delete(0)
3300cmap <C-w> eval fm.ui.console.delete_word()
3301cmap <C-k> eval fm.ui.console.delete_rest(1)
3302cmap <C-u> eval fm.ui.console.delete_rest(-1)
3303cmap <C-y> eval fm.ui.console.paste()
3304
3305# And of course the emacs way
3306copycmap <up> <C-p>
3307copycmap <down> <C-n>
3308copycmap <left> <C-b>
3309copycmap <right> <C-f>
3310copycmap <home> <C-a>
3311copycmap <end> <C-e>
3312copycmap <delete> <C-d>
3313copycmap <backspace> <C-h>
3314
3315# Note: There are multiple ways to express backspaces. <backspace> (code 263)
3316# and <backspace2> (code 127). To be sure, use both.
3317copycmap <backspace> <backspace2>
3318
3319# This special expression allows typing in numerals:
3320cmap <allow_quantifiers> false
3321
3322# ===================================================================
3323# == Pager Keybindings
3324# ===================================================================
3325
3326# Movement
3327pmap <down> pager_move down=1
3328pmap <up> pager_move up=1
3329pmap <left> pager_move left=4
3330pmap <right> pager_move right=4
3331pmap <home> pager_move to=0
3332pmap <end> pager_move to=-1
3333pmap <pagedown> pager_move down=1.0 pages=True
3334pmap <pageup> pager_move up=1.0 pages=True
3335pmap <C-d> pager_move down=0.5 pages=True
3336pmap <C-u> pager_move up=0.5 pages=True
3337
3338copypmap <UP> k <C-p>
3339copypmap <DOWN> j <C-n> <CR>
3340copypmap <LEFT> h
3341copypmap <RIGHT> l
3342copypmap <HOME> g
3343copypmap <END> G
3344copypmap <C-d> d
3345copypmap <C-u> u
3346copypmap <PAGEDOWN> n f <C-F> <Space>
3347copypmap <PAGEUP> p b <C-B>
3348
3349# Basic
3350pmap <ESC> pager_close
3351copypmap <ESC> q Q i <F3>
3352pmap E edit_file
3353
3354# ===================================================================
3355# == Taskview Keybindings
3356# ===================================================================
3357
3358# Movement
3359tmap <up> taskview_move up=1
3360tmap <down> taskview_move down=1
3361tmap <home> taskview_move to=0
3362tmap <end> taskview_move to=-1
3363tmap <pagedown> taskview_move down=1.0 pages=True
3364tmap <pageup> taskview_move up=1.0 pages=True
3365tmap <C-d> taskview_move down=0.5 pages=True
3366tmap <C-u> taskview_move up=0.5 pages=True
3367
3368copytmap <UP> k <C-p>
3369copytmap <DOWN> j <C-n> <CR>
3370copytmap <HOME> g
3371copytmap <END> G
3372copytmap <C-u> u
3373copytmap <PAGEDOWN> n f <C-F> <Space>
3374copytmap <PAGEUP> p b <C-B>
3375
3376# Changing priority and deleting tasks
3377tmap J eval -q fm.ui.taskview.task_move(-1)
3378tmap K eval -q fm.ui.taskview.task_move(0)
3379tmap dd eval -q fm.ui.taskview.task_remove()
3380tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3381tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3382tmap <delete> eval -q fm.ui.taskview.task_remove()
3383
3384# Basic
3385tmap <ESC> taskview_close
3386copytmap <ESC> q Q w <C-c>
3387#+end_src
3388
3389*** scope.sh
3390:PROPERTIES:
3391:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3392:END:
3393
3394#+begin_src sh :tangle no
3395# ranger supports enhanced previews. If the option "use_preview_script"
3396# is set to True and this file exists, this script will be called and its
3397# output is displayed in ranger. ANSI color codes are supported.
3398
3399# NOTES: This script is considered a configuration file. If you upgrade
3400# ranger, it will be left untouched. (You must update it yourself.)
3401# Also, ranger disables STDIN here, so interactive scripts won't work properly
3402
3403# Meanings of exit codes:
3404# code | meaning | action of ranger
3405# -----+------------+-------------------------------------------
3406# 0 | success | success. display stdout as preview
3407# 1 | no preview | failure. display no preview at all
3408# 2 | plain text | display the plain content of the file
3409# 3 | fix width | success. Don't reload when width changes
3410# 4 | fix height | success. Don't reload when height changes
3411# 5 | fix both | success. Don't ever reload
3412
3413# Meaningful aliases for arguments:
3414path="$1" # Full path of the selected file
3415width="$2" # Width of the preview pane (number of fitting characters)
3416height="$3" # Height of the preview pane (number of fitting characters)
3417
3418maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3419
3420# Find out something about the file:
3421mimetype=$(file --mime-type -Lb "$path")
3422extension=${path##*.}
3423
3424# Functions:
3425# runs a command and saves its output into $output. Useful if you need
3426# the return value AND want to use the output in a pipe
3427try() { output=$(eval '"$@"'); }
3428
3429# writes the output of the previouosly used "try" command
3430dump() { echo "$output"; }
3431
3432# a common post-processing function used after most commands
3433trim() { head -n "$maxln"; }
3434
3435# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3436highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3437
3438case "$extension" in
3439 # Archive extensions:
3440 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3441 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3442 try als "$path" && { dump | trim; exit 0; }
3443 try acat "$path" && { dump | trim; exit 3; }
3444 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3445 exit 1;;
3446 rar)
3447 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3448 # PDF documents:
3449 pdf)
3450 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3451 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3452 # BitTorrent Files
3453 torrent)
3454 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3455 # HTML Pages:
3456 htm|html|xhtml)
3457 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3458 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3459 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3460 ;; # fall back to highlight/cat if the text browsers fail
3461esac
3462
3463case "$mimetype" in
3464 # Syntax highlight for text files:
3465 text/* | */xml)
3466 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3467 # Ascii-previews of images:
3468 image/*)
3469 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3470 # Display information about media files:
3471 video/* | audio/*)
3472 exiftool "$path" && exit 5
3473 # Use sed to remove spaces so the output fits into the narrow window
3474 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3475esac
3476
3477exit 1
3478#+end_src
3479
3480** redshift
3481:PROPERTIES:
3482:header-args+: :tangle ~/.config/redshift.conf :comments none
3483:END:
3484
3485#+begin_src conf
3486; Global settings for redshift
3487[redshift]
3488; Set the day and night screen temperatures (Neutral is 6500K)
3489;temp-day=5700
3490;temp-night=3500
3491
3492;temp-day=6500
3493temp-day=6200
3494;temp-night=4800
3495;temp-night=5000
3496;temp-night=4500
3497temp-night=4000
3498
3499; Enable/Disable a smooth transition between day and night
3500; 0 will cause a direct change from day to night screen temperature.
3501; 1 will gradually increase or decrease the screen temperature.
3502transition=1
3503
3504; Set the screen brightness. Default is 1.0.
3505;brightness=0.9
3506; It is also possible to use different settings for day and night
3507; since version 1.8.
3508;brightness-day=0.7
3509;brightness-night=0.4
3510; Set the screen gamma (for all colors, or each color channel
3511; individually)
3512;gamma=0.8
3513;gamma=1.0
3514;gamma=0.8:0.7:0.8
3515; This can also be set individually for day and night since
3516; version 1.10.
3517;gamma-day=0.8:0.7:0.8
3518;gamma-night=0.6
3519
3520; Set the location-provider: 'geoclue2' or 'manual'
3521; type 'redshift -l list' to see possible values.
3522; The location provider settings are in a different section.
3523;location-provider=manual
3524location-provider=geoclue2
3525
3526; Set the adjustment-method: 'randr', 'vidmode'
3527; type 'redshift -m list' to see all possible values.
3528; 'randr' is the preferred method, 'vidmode' is an older API.
3529; but works in some cases when 'randr' does not.
3530; The adjustment method settings are in a different section.
3531adjustment-method=randr
3532
3533; Configuration of the location-provider:
3534; type 'redshift -l PROVIDER:help' to see the settings.
3535; ex: 'redshift -l manual:help'
3536; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3537; are negative numbers.
3538;[manual]
3539;lat=48.1
3540;lon=11.6
3541
3542; Configuration of the adjustment-method
3543; type 'redshift -m METHOD:help' to see the settings.
3544; ex: 'redshift -m randr:help'
3545; In this example, randr is configured to adjust screen 1.
3546; Note that the numbering starts from 0, so this is actually the
3547; second screen. If this option is not specified, Redshift will try
3548; to adjust _all_ screens.
3549;[randr]
3550;screen=1
3551#+end_src
3552
3553** rofi
3554:PROPERTIES:
3555:header-args+: :tangle ~/.config/rofi/config
3556:END:
3557
3558#+begin_src conf
3559rofi.font: Ubuntu Mono 13
3560! rofi.font: Inconsolata 16
3561! rofi.font: Iosevka 13
3562! rofi.font: Source Code Pro 11
3563rofi.modi: run,window
3564! rofi.width: 640
3565rofi.width: 600
3566!rofi.location: 2
3567!rofi.yoffset: 200
3568rofi.monitor: -1
3569!rofi.lines: 10
3570
3571!rofi.theme: /usr/share/rofi/themes//Arc.rasi
3572!rofi.theme: /usr/share/rofi/themes//Paper.rasi
3573!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3574
3575rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3576#+end_src
3577
3578** rofi-pass
3579:PROPERTIES:
3580:header-args+: :tangle ~/.config/rofi-pass/config
3581:END:
3582
3583#+begin_src conf
3584# permanently set alternative root dir
3585# root=/path/to/root
3586
3587# rofi command. Make sure to have "$@" as last argument
3588_rofi () {
3589 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3590 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3591}
3592
3593# xdotool needs the keyboard layout to be set using setxkbmap
3594# You can do this in your autostart scripts (e.g. xinitrc)
3595
3596# If for some reason, you cannot do this, you can set the command here.
3597# and set fix_layout to true
3598fix_layout=false
3599
3600layout_cmd () {
3601 setxkbmap us
3602}
3603
3604# fields to be used
3605URL_field='url'
3606USERNAME_field='user'
3607AUTOTYPE_field='autotype'
3608
3609# delay to be used for :delay keyword
3610delay=2
3611
3612## Programs to be used
3613# Editor
3614EDITOR='gvim -f'
3615
3616# Browser
3617BROWSER='chromium'
3618
3619## Misc settings
3620
3621default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3622auto_enter='false'
3623notify='false'
3624default_autotype='user :tab pass'
3625
3626# color of the help messages
3627# leave empty for autodetection
3628help_color="#4872FF"
3629
3630# Clipboard settings
3631# Possible options: primary, clipboard, both
3632clip=primary
3633
3634# Options for generating new password entries
3635# default_user is also used for password files that have no user field.
3636default_user=aminb
3637default_user2=aminban
3638password_length=30
3639
3640# Custom Keybindings
3641#autotype="Alt+1"
3642autotype="Alt+m"
3643type_user="Alt+2"
3644type_pass="Alt+3"
3645open_url="Alt+4"
3646copy_name="Alt+u"
3647copy_url="Alt+l"
3648copy_pass="Alt+p"
3649show="Alt+o"
3650copy_entry="Alt+2"
3651type_entry="Alt+1"
3652copy_menu="Alt+c"
3653action_menu="Alt+a"
3654type_menu="Alt+t"
3655help="Alt+h"
3656switch="Alt+x"
3657insert_pass="Alt+n"
3658#+end_src
3659
3660** sway
3661:PROPERTIES:
3662:header-args+: :tangle ~/.config/sway/config
3663:END:
3664
3665#+begin_src conf
3666exec xrdb .Xresources
3667exec dunst
3668### Variables
3669# super
3670set $mod Mod4
3671# alt
3672set $mod2 Mod1
3673set $left h
3674set $down j
3675set $up k
3676set $right l
3677set $term urxvt
3678set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3679
3680### Output configuration
3681#
3682# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3683output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3684#
3685# Example configuration:
3686#
3687# output HDMI-A-1 resolution 1920x1080 position 1920,0
3688#
3689# You can get the names of your outputs by running: swaymsg -t get_outputs
3690
3691### Idle configuration
3692#
3693# Example configuration:
3694#
3695#exec swayidle \
3696# timeout 300 'swaylock -c 000000' \
3697# timeout 600 'swaymsg "output * dpms off"' \
3698# resume 'swaymsg "output * dpms on"' \
3699# before-sleep 'swaylock -c 000000'
3700#
3701# This will lock your screen after 300 seconds of inactivity, then turn off
3702# your displays after another 600 seconds, and turn your screens back on when
3703# resumed. It will also lock your screen before your computer goes to sleep.
3704
3705### Input configuration
3706
3707input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3708 dwt enabled
3709 tap enabled
3710 natural_scroll enabled
3711 middle_emulation enabled
3712 click_method clickfinger
3713}
3714
3715input "1:1:AT_Translated_Set_2_keyboard" {
3716 repeat_delay 200
3717 repeat_rate 45
3718 xkb_layout us,ir
3719 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3720}
3721
3722
3723### Key bindings
3724#
3725# Basics:
3726#
3727 # start a terminal
3728 bindsym $mod+Return exec $term
3729
3730 # kill focused window
3731 bindsym $mod+Shift+q kill
3732
3733 # start your launcher
3734 bindsym $mod+d exec $menu
3735
3736 # Drag floating windows by holding down $mod and left mouse button.
3737 # Resize them with right mouse button + $mod.
3738 floating_modifier $mod
3739
3740 # reload the configuration file
3741 bindsym $mod+Shift+c reload
3742
3743 # exit sway (logs you out of your wayland session)
3744 bindsym $mod+Shift+e exit
3745
3746 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3747 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3748 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3749
3750 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3751 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3752 bindsym XF86AudioMute exec pamixer --toggle-mute
3753 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3754
3755 # original sway workspace switch and window move
3756 bindsym $mod+bracketleft workspace prev
3757 bindsym $mod+bracketright workspace next
3758 bindsym $mod+braceleft move container to workspace prev
3759 bindsym $mod+braceright move container to workspace next
3760
3761 # bspwm-esque workspace switch and window move
3762 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3763 bindsym $mod2+bracketright exec sway-ws-util switch next
3764 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3765 bindsym $mod2+braceright exec sway-ws-util move next follow
3766#
3767# Moving around:
3768#
3769 # Move your focus around
3770 bindsym $mod+$left focus left
3771 bindsym $mod+$down focus down
3772 bindsym $mod+$up focus up
3773 bindsym $mod+$right focus right
3774 # or use $mod+[up|down|left|right]
3775 bindsym $mod+Left focus left
3776 bindsym $mod+Down focus down
3777 bindsym $mod+Up focus up
3778 bindsym $mod+Right focus right
3779
3780 # _move_ the focused window with the same, but add Shift
3781 bindsym $mod+Shift+$left move left
3782 bindsym $mod+Shift+$down move down
3783 bindsym $mod+Shift+$up move up
3784 bindsym $mod+Shift+$right move right
3785 # ditto, with arrow keys
3786 bindsym $mod+Shift+Left move left
3787 bindsym $mod+Shift+Down move down
3788 bindsym $mod+Shift+Up move up
3789 bindsym $mod+Shift+Right move right
3790#
3791# Workspaces:
3792#
3793 # switch to workspace
3794 bindsym $mod+1 workspace 1
3795 bindsym $mod+2 workspace 2
3796 bindsym $mod+3 workspace 3
3797 bindsym $mod+4 workspace 4
3798 bindsym $mod+5 workspace 5
3799 bindsym $mod+6 workspace 6
3800 bindsym $mod+7 workspace 7
3801 bindsym $mod+8 workspace 8
3802 bindsym $mod+9 workspace 9
3803 bindsym $mod+0 workspace 10
3804 # move focused container to workspace
3805 bindsym $mod+Shift+1 move container to workspace 1
3806 bindsym $mod+Shift+2 move container to workspace 2
3807 bindsym $mod+Shift+3 move container to workspace 3
3808 bindsym $mod+Shift+4 move container to workspace 4
3809 bindsym $mod+Shift+5 move container to workspace 5
3810 bindsym $mod+Shift+6 move container to workspace 6
3811 bindsym $mod+Shift+7 move container to workspace 7
3812 bindsym $mod+Shift+8 move container to workspace 8
3813 bindsym $mod+Shift+9 move container to workspace 9
3814 bindsym $mod+Shift+0 move container to workspace 10
3815 # Note: workspaces can have any name you want, not just numbers.
3816 # We just use 1-10 as the default.
3817#
3818# Layout stuff:
3819#
3820 # You can "split" the current object of your focus with
3821 # $mod+b or $mod+v, for horizontal and vertical splits
3822 # respectively.
3823 bindsym $mod+b splith
3824 bindsym $mod+v splitv
3825
3826 # Switch the current container between different layout styles
3827 bindsym $mod+s layout stacking
3828 bindsym $mod+w layout tabbed
3829 bindsym $mod+e layout toggle split
3830
3831 # Make the current focus fullscreen
3832 bindsym $mod+f fullscreen
3833
3834 # Toggle the current focus between tiling and floating mode
3835 bindsym $mod+Shift+space floating toggle
3836
3837 # Swap focus between the tiling area and the floating area
3838 bindsym $mod+space focus mode_toggle
3839
3840 # move focus to the parent container
3841 bindsym $mod+a focus parent
3842#
3843# Scratchpad:
3844#
3845 # Sway has a "scratchpad", which is a bag of holding for windows.
3846 # You can send windows there and get them back later.
3847
3848 # Move the currently focused window to the scratchpad
3849 bindsym $mod+Shift+minus move scratchpad
3850
3851 # Show the next scratchpad window or hide the focused scratchpad window.
3852 # If there are multiple scratchpad windows, this command cycles through them.
3853 bindsym $mod+minus scratchpad show
3854#
3855# Resizing containers:
3856#
3857mode "resize" {
3858 # left will shrink the containers width
3859 # right will grow the containers width
3860 # up will shrink the containers height
3861 # down will grow the containers height
3862 bindsym $left resize shrink width 10px
3863 bindsym $down resize grow height 10px
3864 bindsym $up resize shrink height 10px
3865 bindsym $right resize grow width 10px
3866
3867 # ditto, with arrow keys
3868 bindsym Left resize shrink width 10px
3869 bindsym Down resize grow height 10px
3870 bindsym Up resize shrink height 10px
3871 bindsym Right resize grow width 10px
3872
3873 # return to default mode
3874 bindsym Return mode "default"
3875 bindsym Escape mode "default"
3876}
3877bindsym $mod+Shift+r mode "resize"
3878
3879#
3880# Status Bar:
3881#
3882# Read `man 5 sway-bar` for more information about this section.
3883bar {
3884 position bottom
3885 colors {
3886 statusline #ffffff
3887 background #323232
3888 inactive_workspace #32323200 #32323200 #5c5c5c
3889 }
3890 status_command i3gs ~/.config/i3gs/config
3891}
3892
3893include /etc/sway/config.d/*
3894#+end_src
3895
3896** TLP
3897
3898*** TODO enigma
3899*** plasma
3900
3901#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3902# ------------------------------------------------------------------------------
3903# tlp - Parameters for power saving
3904# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3905
3906# Hint: some features are disabled by default, remove the leading # to enable
3907# them.
3908
3909# Set to 0 to disable, 1 to enable TLP.
3910TLP_ENABLE=1
3911
3912# Operation mode when no power supply can be detected: AC, BAT.
3913# Concerns some desktop and embedded hardware only.
3914TLP_DEFAULT_MODE=AC
3915
3916# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3917# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3918TLP_PERSISTENT_DEFAULT=0
3919
3920# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3921# Non-zero value enables, zero disables laptop mode.
3922DISK_IDLE_SECS_ON_AC=0
3923DISK_IDLE_SECS_ON_BAT=2
3924
3925# Dirty page values (timeouts in secs).
3926MAX_LOST_WORK_SECS_ON_AC=15
3927MAX_LOST_WORK_SECS_ON_BAT=60
3928
3929# Hint: CPU parameters below are disabled by default, remove the leading #
3930# to enable them, otherwise kernel default values are used.
3931
3932# Select a CPU frequency scaling governor.
3933# Intel Core i processor with intel_pstate driver:
3934# powersave(*), performance.
3935# Older hardware with acpi-cpufreq driver:
3936# ondemand(*), powersave, performance, conservative, schedutil.
3937# (*) is recommended.
3938# Hint: use tlp-stat -p to show the active driver and available governors.
3939# Important:
3940# powersave for intel_pstate and ondemand for acpi-cpufreq are power
3941# efficient for *almost all* workloads and therefore kernel and most
3942# distributions have chosen them as defaults. If you still want to change,
3943# you should know what you're doing! You *must* disable your distribution's
3944# governor settings or conflicts will occur.
3945#CPU_SCALING_GOVERNOR_ON_AC=powersave
3946#CPU_SCALING_GOVERNOR_ON_BAT=powersave
3947
3948# Set the min/max frequency available for the scaling governor.
3949# Possible values strongly depend on your CPU. For available frequencies see
3950# the output of tlp-stat -p.
3951#CPU_SCALING_MIN_FREQ_ON_AC=0
3952#CPU_SCALING_MAX_FREQ_ON_AC=0
3953#CPU_SCALING_MIN_FREQ_ON_BAT=0
3954#CPU_SCALING_MAX_FREQ_ON_BAT=0
3955
3956# Set energy performance hints (HWP) for Intel P-state governor:
3957# performance, balance_performance, default, balance_power, power
3958# Values are given in order of increasing power saving.
3959# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3960CPU_HWP_ON_AC=balance_performance
3961CPU_HWP_ON_BAT=balance_power
3962
3963# Set Intel P-state performance: 0..100 (%).
3964# Limit the max/min P-state to control the power dissipation of the CPU.
3965# Values are stated as a percentage of the available performance.
3966# Requires an Intel Core i processor with intel_pstate driver.
3967#CPU_MIN_PERF_ON_AC=0
3968#CPU_MAX_PERF_ON_AC=100
3969#CPU_MIN_PERF_ON_BAT=0
3970#CPU_MAX_PERF_ON_BAT=30
3971
3972# Set the CPU "turbo boost" feature: 0=disable, 1=allow
3973# Requires an Intel Core i processor.
3974# Important:
3975# - This may conflict with your distribution's governor settings
3976# - A value of 1 does *not* activate boosting, it just allows it
3977#CPU_BOOST_ON_AC=1
3978#CPU_BOOST_ON_BAT=0
3979
3980# Minimize number of used CPU cores/hyper-threads under light load conditions:
3981# 0=disable, 1=enable.
3982SCHED_POWERSAVE_ON_AC=0
3983SCHED_POWERSAVE_ON_BAT=1
3984
3985# Kernel NMI Watchdog:
3986# 0=disable (default, saves power), 1=enable (for kernel debugging only).
3987NMI_WATCHDOG=0
3988
3989# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3990# Frequency voltage pairs are written to:
3991# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3992# CAUTION: only use this, if you thoroughly understand what you are doing!
3993#PHC_CONTROLS="F:V F:V F:V F:V"
3994
3995# Set CPU performance versus energy savings policy:
3996# performance, balance-performance, default, balance-power, power.
3997# Values are given in order of increasing power saving.
3998# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3999ENERGY_PERF_POLICY_ON_AC=performance
4000ENERGY_PERF_POLICY_ON_BAT=balance-power
4001
4002# Disk devices; separate multiple devices with spaces (default: sda).
4003# Devices can be specified by disk ID also (lookup with: tlp diskid).
4004DISK_DEVICES="sda sdb"
4005
4006# Disk advanced power management level: 1..254, 255 (max saving, min, off).
4007# Levels 1..127 may spin down the disk; 255 allowable on most drives.
4008# Separate values for multiple disks with spaces. Use the special value 'keep'
4009# to keep the hardware default for the particular disk.
4010DISK_APM_LEVEL_ON_AC="254 254"
4011DISK_APM_LEVEL_ON_BAT="128 128"
4012
4013# Hard disk spin down timeout:
4014# 0: spin down disabled
4015# 1..240: timeouts from 5s to 20min (in units of 5s)
4016# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4017# See 'man hdparm' for details.
4018# Separate values for multiple disks with spaces. Use the special value 'keep'
4019# to keep the hardware default for the particular disk.
4020#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4021#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4022
4023# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4024# Separate values for multiple disks with spaces. Use the special value 'keep'
4025# to keep the kernel default scheduler for the particular disk.
4026#DISK_IOSCHED="cfq cfq"
4027
4028# AHCI link power management (ALPM) for disk devices:
4029# min_power, med_power_with_dipm(*), medium_power, max_performance.
4030# (*) Kernel >= 4.15 required, then recommended.
4031# Multiple values separated with spaces are tried sequentially until success.
4032SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4033SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4034
4035# Exclude host devices from AHCI link power management.
4036# Separate multiple hosts with spaces.
4037#SATA_LINKPWR_BLACKLIST="host1"
4038
4039# Runtime Power Management for AHCI host and disks devices:
4040# on=disable, auto=enable.
4041# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4042#AHCI_RUNTIME_PM_ON_AC=on
4043#AHCI_RUNTIME_PM_ON_BAT=on
4044
4045# Seconds of inactivity before disk is suspended.
4046AHCI_RUNTIME_PM_TIMEOUT=15
4047
4048# PCI Express Active State Power Management (PCIe ASPM):
4049# default, performance, powersave.
4050PCIE_ASPM_ON_AC=performance
4051PCIE_ASPM_ON_BAT=powersave
4052
4053# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4054# auto = mid on BAT, high on AC; default = use hardware defaults.
4055RADEON_POWER_PROFILE_ON_AC=high
4056RADEON_POWER_PROFILE_ON_BAT=low
4057
4058# Radeon dynamic power management method (DPM): battery, performance.
4059RADEON_DPM_STATE_ON_AC=performance
4060RADEON_DPM_STATE_ON_BAT=battery
4061
4062# Radeon DPM performance level: auto, low, high; auto is recommended.
4063RADEON_DPM_PERF_LEVEL_ON_AC=auto
4064RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4065
4066# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4067WIFI_PWR_ON_AC=off
4068WIFI_PWR_ON_BAT=on
4069
4070# Disable wake on LAN: Y/N.
4071WOL_DISABLE=Y
4072
4073# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4074# A value of 0 disables, >=1 enables power saving (recommended: 1).
4075SOUND_POWER_SAVE_ON_AC=0
4076SOUND_POWER_SAVE_ON_BAT=0
4077
4078# Disable controller too (HDA only): Y/N.
4079SOUND_POWER_SAVE_CONTROLLER=N
4080
4081# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4082# Drive can be powered on again by releasing (and reinserting) the eject lever
4083# or by pressing the disc eject button on newer models.
4084# Note: an UltraBay/MediaBay hard disk is never powered off.
4085BAY_POWEROFF_ON_AC=0
4086BAY_POWEROFF_ON_BAT=0
4087# Optical drive device to power off (default sr0).
4088BAY_DEVICE="sr0"
4089
4090# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4091RUNTIME_PM_ON_AC=on
4092RUNTIME_PM_ON_BAT=auto
4093
4094# Exclude PCI(e) device adresses the following list from Runtime PM
4095# (separate with spaces). Use lspci to get the adresses (1st column).
4096#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4097RUNTIME_PM_BLACKLIST="01:00.0"
4098
4099# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4100# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4101# prevents accidential power-on of dGPU in hybrid graphics setups.
4102# Use "" to disable the feature completely.
4103# Separate multiple drivers with spaces.
4104#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4105
4106# Set to 0 to disable, 1 to enable USB autosuspend feature.
4107USB_AUTOSUSPEND=1
4108
4109# Exclude listed devices from USB autosuspend (separate with spaces).
4110# Use lsusb to get the ids.
4111# Note: input devices (usbhid) are excluded automatically
4112#USB_BLACKLIST="1111:2222 3333:4444"
4113
4114# Bluetooth devices are excluded from USB autosuspend:
4115# 0=do not exclude, 1=exclude.
4116USB_BLACKLIST_BTUSB=0
4117
4118# Phone devices are excluded from USB autosuspend:
4119# 0=do not exclude, 1=exclude (enable charging).
4120USB_BLACKLIST_PHONE=0
4121
4122# Printers are excluded from USB autosuspend:
4123# 0=do not exclude, 1=exclude.
4124USB_BLACKLIST_PRINTER=1
4125
4126# WWAN devices are excluded from USB autosuspend:
4127# 0=do not exclude, 1=exclude.
4128USB_BLACKLIST_WWAN=1
4129
4130# Include listed devices into USB autosuspend even if already excluded
4131# by the blacklists above (separate with spaces).
4132# Use lsusb to get the ids.
4133#USB_WHITELIST="1111:2222 3333:4444"
4134
4135# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4136# (workaround for USB devices that cause shutdown problems).
4137#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4138
4139# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4140# on system startup: 0=disable, 1=enable.
4141# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4142# are ignored when this is enabled!
4143#RESTORE_DEVICE_STATE_ON_STARTUP=0
4144RESTORE_DEVICE_STATE_ON_STARTUP=1
4145
4146# Radio devices to disable on startup: bluetooth, wifi, wwan.
4147# Separate multiple devices with spaces.
4148#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4149
4150# Radio devices to enable on startup: bluetooth, wifi, wwan.
4151# Separate multiple devices with spaces.
4152#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4153
4154# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4155# (workaround for devices that are blocking shutdown).
4156#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4157
4158# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4159# (to prevent other operating systems from missing radios).
4160#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4161
4162# Radio devices to enable on AC: bluetooth, wifi, wwan.
4163#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4164
4165# Radio devices to disable on battery: bluetooth, wifi, wwan.
4166#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4167
4168# Radio devices to disable on battery when not in use (not connected):
4169# bluetooth, wifi, wwan.
4170#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4171
4172# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4173# required). Charging starts when the remaining capacity falls below the
4174# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4175# Main / Internal battery (values in %)
4176#START_CHARGE_THRESH_BAT0=75
4177#STOP_CHARGE_THRESH_BAT0=80
4178# Ultrabay / Slice / Replaceable battery (values in %)
4179#START_CHARGE_THRESH_BAT1=75
4180#STOP_CHARGE_THRESH_BAT1=80
4181
4182# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4183#RESTORE_THRESHOLDS_ON_BAT=1
4184
4185# ------------------------------------------------------------------------------
4186# tlp-rdw - Parameters for the radio device wizard
4187# Possible devices: bluetooth, wifi, wwan.
4188
4189# Hints:
4190# - Parameters are disabled by default, remove the leading # to enable them
4191# - Separate multiple radio devices with spaces
4192
4193# Radio devices to disable on connect.
4194#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4195#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4196#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4197
4198# Radio devices to enable on disconnect.
4199#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4200#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4201#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4202
4203# Radio devices to enable/disable when docked.
4204#DEVICES_TO_ENABLE_ON_DOCK=""
4205#DEVICES_TO_DISABLE_ON_DOCK=""
4206
4207# Radio devices to enable/disable when undocked.
4208#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4209#DEVICES_TO_DISABLE_ON_UNDOCK=""
4210#+end_src
4211
4212** X
4213
4214*** xprofile
4215:PROPERTIES:
4216:header-args+: :tangle ~/.xprofile
4217:END:
4218
4219=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4220contrary, it's automatically sourced by LightDM, my display manager of
4221choice.
4222
4223#+begin_src sh :tangle no
4224xset -b # disable bell
4225xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4226
4227# setxkbmap -option compose:ralt
4228
4229setxkbmap -option ctrl:nocaps # turn capslock into control
4230setxkbmap -option altwin:swap_alt_win # swap alt and super
4231
4232if [ $(hostname) = "plasma" ]
4233then
4234 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4235fi
4236
4237if [ $(hostname) = "enigma" ]
4238then
4239 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4240fi
4241
4242light -Scrs "intel_backlight" 2
4243
4244source $HOME/.zprofile
4245
4246export _JAVA_AWT_WM_NONREPARENTING=1
4247export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4248
4249if [ $(hostname) = "plasma" ]
4250then
4251 unlock-def-gk.py &
4252fi
4253
4254bspwm &
4255#+end_src
4256
4257*** X resources
4258
4259**** Xresources
4260:PROPERTIES:
4261:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4262:END:
4263
4264#+begin_src conf-xdefaults
4265#include ".Xresources.d/fonts"
4266! #include ".Xresources.d/colors"
4267#include ".Xresources.d/emacs"
4268#include ".Xresources.d/rxvt-unicode"
4269#+end_src
4270
4271**** Xresources.d
4272
4273***** fonts
4274:PROPERTIES:
4275:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4276:END:
4277
4278#+begin_src conf-xdefaults
4279Xft.lcdfilter: lcddefault
4280Xft.antialias: true
4281Xft.autohint: 0
4282Xft.hinting: true
4283Xft.hintstyle: hintslight
4284! Xft.hintstyle: hintfull
4285Xft.rgba: rgb
4286Xft.dpi: 96
4287#+end_src
4288
4289***** colors
4290:PROPERTIES:
4291:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4292:END:
4293
4294#+begin_src conf-xdefaults :tangle no
4295#include "gruvbox-light.xresources"
4296! #include "gruvbox-dark.xresources"
4297#include "gruvbox-urxvt256.xresources"
4298#+end_src
4299
4300#+begin_src conf-xdefaults :tangle no
4301! -----------------------------------------------------------------------------
4302! File: gruvbox-light.xresources
4303! Description: Retro groove colorscheme generalized
4304! Author: morhetz <morhetz@gmail.com>
4305! Source: https://github.com/morhetz/gruvbox-generalized
4306! Last Modified: 6 Sep 2014
4307! -----------------------------------------------------------------------------
4308
4309! hard contrast: *background: #f9f5d7
4310*background: #fbf1c7
4311! soft contrast: *background: #f2e5bc
4312*foreground: #3c3836
4313! Black + DarkGrey
4314*color0: #fdf4c1
4315*color8: #928374
4316! DarkRed + Red
4317*color1: #cc241d
4318*color9: #9d0006
4319! DarkGreen + Green
4320*color2: #98971a
4321*color10: #79740e
4322! DarkYellow + Yellow
4323*color3: #d79921
4324*color11: #b57614
4325! DarkBlue + Blue
4326*color4: #458588
4327*color12: #076678
4328! DarkMagenta + Magenta
4329*color5: #b16286
4330*color13: #8f3f71
4331! DarkCyan + Cyan
4332*color6: #689d6a
4333*color14: #427b58
4334! LightGrey + White
4335*color7: #7c6f64
4336*color15: #3c3836
4337#+end_src
4338
4339#+begin_src conf-xdefaults :tangle no
4340! -----------------------------------------------------------------------------
4341! File: gruvbox-dark.xresources
4342! Description: Retro groove colorscheme generalized
4343! Author: morhetz <morhetz@gmail.com>
4344! Source: https://github.com/morhetz/gruvbox-generalized
4345! Last Modified: 6 Sep 2014
4346! -----------------------------------------------------------------------------
4347
4348! hard contrast: *background: #1d2021
4349*background: #282828
4350! soft contrast: *background: #32302f
4351*foreground: #ebdbb2
4352! Black + DarkGrey
4353*color0: #282828
4354*color8: #928374
4355! DarkRed + Red
4356*color1: #cc241d
4357*color9: #fb4934
4358! DarkGreen + Green
4359*color2: #98971a
4360*color10: #b8bb26
4361! DarkYellow + Yellow
4362*color3: #d79921
4363*color11: #fabd2f
4364! DarkBlue + Blue
4365*color4: #458588
4366*color12: #83a598
4367! DarkMagenta + Magenta
4368*color5: #b16286
4369*color13: #d3869b
4370! DarkCyan + Cyan
4371*color6: #689d6a
4372*color14: #8ec07c
4373! LightGrey + White
4374*color7: #a89984
4375*color15: #ebdbb2
4376#+end_src
4377
4378#+begin_src conf-xdefaults :tangle no
4379! -----------------------------------------------------------------------------
4380! File: gruvbox-urxvt256.xresources
4381! Description: Retro groove colorscheme generalized
4382! Author: morhetz <morhetz@gmail.com>
4383! Source: https://github.com/morhetz/gruvbox-generalized
4384! Last Modified: 13 Dec 2013
4385! -----------------------------------------------------------------------------
4386
4387URxvt.color24: #076678
4388URxvt.color66: #427b58
4389URxvt.color88: #9d0006
4390URxvt.color96: #8f3f71
4391URxvt.color100: #79740e
4392URxvt.color108: #8ec07c
4393URxvt.color109: #83a598
4394URxvt.color130: #af3a03
4395URxvt.color136: #b57614
4396URxvt.color142: #b8bb26
4397URxvt.color167: #fb4934
4398URxvt.color175: #d3869b
4399URxvt.color208: #fe8019
4400URxvt.color214: #fabd2f
4401URxvt.color223: #ebdbb2
4402URxvt.color228: #f2e5bc
4403URxvt.color229: #fbf1c7
4404URxvt.color230: #f9f5d7
4405URxvt.color234: #1d2021
4406URxvt.color235: #282828
4407URxvt.color236: #32302f
4408URxvt.color237: #3c3836
4409URxvt.color239: #504945
4410URxvt.color241: #665c54
4411URxvt.color243: #7c6f64
4412URxvt.color244: #928374
4413URxvt.color245: #928374
4414URxvt.color246: #a89984
4415URxvt.color248: #bdae93
4416URxvt.color250: #d5c4a1
4417#+end_src
4418
4419***** emacs
4420:PROPERTIES:
4421:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4422:END:
4423
4424#+begin_src conf-xdefaults
4425Emacs.menuBar: off
4426Emacs.toolBar: off
4427Emacs.verticalScrollBars: off
4428Emacs.cursorBlink: off
4429Emacs.FontBackend: xft,x
4430! Emacs.font: Ubuntu Mono-12
4431! Emacs.font: Triplicate T4C-11
4432! Emacs.font: Ubuntu Mono-10.5
4433! Emacs.font: Ubuntu Mono-12
4434! Emacs.font: Iosevka-11
4435
4436! Emacs.font: Fira Mono:size=15
4437! Emacs.font: DejaVu Sans Mono:size=15
4438! Emacs.font: Inconsolata:size=17
4439! Emacs.font: Inconsolata:size=16
4440! Emacs.font: Inconsolata LGC:size=14
4441! Emacs.font: Source Code Pro Medium-10.5
4442Emacs.font: Ubuntu Mono:size=16
4443! Emacs.font: Iosevka:size=16
4444#+end_src
4445
4446***** rxvt-unicode
4447:PROPERTIES:
4448:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4449:END:
4450
4451#+begin_src conf-xdefaults
4452! Font
4453URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4454URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4455URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4456URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4457
4458URxvt.xftAntialias: true
4459URxvt.letterSpace: 0
4460
4461URxvt.depth: 0
4462URxvt.loginShell: true
4463URxvt.saveLines: 100000
4464URxvt.internalBorder: 3
4465URxvt.lineSpace: 0
4466URxvt.scrollBar: false
4467URxvt.scrollStyle: rxvt
4468URxvt*scrollTtyOutput: false
4469URxvt*scrollWithBuffer: true
4470URxvt*scrollTtyKeypress: true
4471URxvt.keysym.Shift-Up: command:\033]720;1\007
4472URxvt.keysym.Shift-Down: command:\033]721;1\007
4473
4474URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4475URxvt.perl-ext: bidi
4476URxvt.bidi.enabled: 1
4477URxvt.url-select.launcher: firefox
4478URxvt.url-select.underline: true
4479URxvt.keysym.M-u: perl:url-select:select_next
4480URxvt.keysym.M-Escape: perl:keyboard-select:activate
4481URxvt.keysym.M-s: perl:keyboard-select:search
4482URxvt.url-launcher: /usr/bin/firefox
4483URxvt.matcher.button: 1
4484URxvt.iso14755: false
4485URxvt.iso14755_53: false
4486URxvt.keysym.M-c: perl:clipboard:copy
4487URxvt.keysym.M-v: perl:clipboard:paste
4488URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4489URxvt.keysym.C-Up: font-size:increase
4490URxvt.keysym.C-Down: font-size:decrease
4491URxvt.keysym.C-S-Up: font-size:incglobal
4492URxvt.keysym.C-S-Down: font-size:decglobal
4493URxvt.keysym.C-equal: font-size:reset
4494!URxvt.keysym.C-question: font-size:show
4495
4496URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4497
4498!urxvt*foreground: white
4499!urxvt*background: black
4500
4501!*color0: #2E3436
4502!*color1: #a40000
4503!*color2: #4E9A06
4504!*color3: #C4A000
4505!*color4: #3465A4
4506!*color5: #75507B
4507!*color6: #ce5c00
4508!*color7: #babdb9
4509!*color8: #555753
4510!*color9: #EF2929
4511!*color10: #8AE234
4512!*color11: #FCE94F
4513!*color12: #729FCF
4514!*color13: #AD7FA8
4515!*color14: #fcaf3e
4516!*color15: #EEEEEC
4517
4518!URxvt.foreground: #C8C8C8
4519!URxvt.background: #FFFFFF
4520
4521!! black
4522!*color0: #2E3436
4523!*color8: #555753
4524!! red
4525!*color1: #a40000
4526!*color9: #EF2929
4527!! green
4528!*color2: #4E9A06
4529!*color10: #8AE234
4530!! yellow
4531!*color3: #C4A000
4532!*color11: #FCE94F
4533!! blue
4534!*color4: #3465A4
4535!*color12: #729FCF
4536!! purple
4537!*color5: #75507B
4538!*color13: #AD7FA8
4539!! orange (replaces cyan)
4540!*color6: #ce5c00
4541!*color14: #fcaf3e
4542!! white
4543!*color7: #babdb9
4544!*color15: #EEEEEC
4545
4546! Tango colour theme for rxvt-unicode
4547URxvt.background: #FFFFFF
4548URxvt.foreground: #000000
4549
4550! Black
4551URxvt.color0: #2E3436
4552URxvt.color8: #757773
4553
4554! Red
4555URxvt.color1: #CC0000
4556URxvt.color9: #EF2929
4557
4558! Green
4559URxvt.color2: #4E9A06
4560URxvt.color10: #8AE234
4561
4562! Yellow
4563URxvt.color3: #C4A000
4564URxvt.color11: #FCE94F
4565
4566! Blue
4567URxvt.color4: #3465A4
4568URxvt.color12: #729FCF
4569
4570! Magenta
4571URxvt.color5: #75507B
4572URxvt.color13: #AD7FA8
4573
4574!! Cyan
4575!URxvt.color6: #06989A
4576!URxvt.color14: #34E2E2
4577! orange (replaces cyan)
4578*color6: #ce5c00
4579*color14: #fcaf3e
4580
4581! White
4582URxvt.color7: #D3D7CF
4583URxvt.color15: #EEEEEC
4584#+end_src
4585
4586** XDG
4587:PROPERTIES:
4588:header-args+: :tangle ~/.config/user-dirs.dirs
4589:END:
4590
4591#+begin_src conf
4592XDG_DESKTOP_DIR="$HOME/Desktop"
4593XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4594XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4595XDG_MUSIC_DIR="$HOME/usr/music"
4596XDG_PICTURES_DIR="$HOME/usr/pics"
4597XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4598XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4599XDG_VIDEOS_DIR="$HOME/usr/vids"
4600#+end_src
4601
4602** Zathura
4603:PROPERTIES:
4604:header-args+: :tangle ~/.config/zathura/zathurarc
4605:END:
4606
4607#+begin_src conf
4608set smooth-scroll true
4609set selection-clipboard clipboard
4610set zoom-step 05
4611set default-bg "#272727"
4612set statusbar-bg "#272727"
4613set inputbar-bg "#373737"
4614#+end_src
4615
4616** Zsh
4617
4618My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4619[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4620installed.
4621
4622*** zimrc
4623:PROPERTIES:
4624:header-args+: :tangle ~/.zimrc
4625:END:
4626
4627#+begin_src sh
4628
4629
4630#################
4631# CORE SETTINGS #
4632#################
4633
4634#
4635# Zim settings
4636#
4637
4638# Select what modules you would like enabled.
4639# The second line of modules may depend on options set by modules in the first
4640# line. These dependencies are noted on the respective module's README.md.
4641zmodules=(directory environment git git-info history input ssh utility custom \
4642 syntax-highlighting history-substring-search prompt completion)
4643
4644
4645###################
4646# MODULE SETTINGS #
4647###################
4648
4649#
4650# Prompt
4651#
4652
4653# Set your desired prompt here
4654zprompt_theme='pure'
4655#PURE_PROMPT_SYMBOL=λ
4656#PURE_PROMPT_SYMBOL=δ
4657PURE_PROMPT_SYMBOL=➜
4658
4659#
4660# Completion
4661#
4662
4663# set an optional host-specific filename for the completion cache file
4664# if none is provided, the default '.zcompdump' is used.
4665#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4666
4667#
4668# Utility
4669#
4670
4671# Uncomment to enable command correction prompts
4672# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4673setopt CORRECT
4674
4675#
4676# Environment
4677#
4678
4679# Set the string below to the desired terminal title format string.
4680# The terminal title is redrawn upon directory change, however, variables like
4681# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4682# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4683# The example below uses the following format: 'username@host:/current/directory'
4684ztermtitle='%n@%m:%~'
4685
4686#
4687# Input
4688#
4689
4690# Uncomment to enable double-dot expansion.
4691# This appends '../' to your input for each '.' you type after an initial '..'
4692#zdouble_dot_expand='true'
4693
4694#
4695# Syntax-Highlighting
4696#
4697
4698# This determines what highlighters will be used with the syntax-highlighting module.
4699# Documentation of the highlighters can be found here:
4700# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4701# For (u)rxvt, termite and gnome-terminal users,
4702# removing the 'cursor' highlighter will fix the disappearing cursor problem
4703#zhighlighters=(main brackets cursor)
4704zhighlighters=(main brackets pattern)
4705
4706
4707#
4708# SSH
4709#
4710
4711# Load these ssh identities with the ssh module
4712zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4713
4714
4715#
4716# Pacman
4717#
4718
4719# Set (optional) pacman front-end.
4720zpacman_frontend='yay'
4721
4722# Load any helper scripts as defined here
4723#zpacman_helper=(aur)
4724#+end_src
4725
4726*** zlogin
4727:PROPERTIES:
4728:header-args+: :tangle ~/.zlogin
4729:END:
4730
4731#+begin_src sh
4732
4733
4734#
4735# User configuration sourced by login shells
4736#
4737
4738# Initialize zim
4739[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4740#+end_src
4741
4742*** zprofile
4743:PROPERTIES:
4744:header-args+: :tangle ~/.zprofile
4745:END:
4746
4747#+begin_src sh
4748#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4749#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4750export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4751export XDG_CONFIG_HOME=$HOME/.config
4752export XDG_DATA_HOME=$HOME/.local/share
4753export XDG_DATA_DIRS=/usr/local/share:/usr/share
4754export MAILDIR="$HOME/mail"
4755export CVS_RSH=ssh
4756#export MATHMODELS=$HOME/src/eiffel/mathmodels
4757#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4758#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4759
4760# Eiffel2Java stuff
4761#export JAVA_HOME=/usr/lib/jvm/default
4762#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4763#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4764#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4765
4766#export PATH="$HOME/usr/build/pvs:$PATH"
4767#export SBCLISP_HOME=/usr/share/sbcl-source
4768#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4769
4770export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4771
4772#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4773#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4774
4775if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4776#+end_src
4777
4778*** zshenv
4779:PROPERTIES:
4780:header-args+: :tangle ~/.zshenv
4781:END:
4782
4783#+begin_src sh
4784# Ensure that a non-login, non-interactive shell has a defined environment.
4785if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4786 source "${ZDOTDIR:-$HOME}/.zprofile"
4787fi
4788#+end_src
4789
4790*** zshrc
4791:PROPERTIES:
4792:header-args+: :tangle ~/.zshrc
4793:END:
4794
4795#+begin_src sh
4796# Bash-like navigation
4797#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4798#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4799export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4800#ZLE_SPACE_SUFFIX_CHARS=$'|&'
4801
4802#disable -r time # disable shell reserved word
4803#alias time='time -p' # -p for POSIX output
4804
4805# rehash if last command was pacaur or pacman
4806# (so that zsh picks up changes in $PATH immediately)
4807TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4808
4809#
4810# User configuration sourced by interactive shells
4811#
4812
4813# Change default zim location
4814export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4815
4816# Start zim
4817[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4818
4819ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4820#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4821
4822setopt globdots
4823
4824source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4825source ~/.zsh/zsh-autopair/autopair.zsh
4826
4827
4828### fzf ###
4829
4830source /usr/share/fzf/key-bindings.zsh
4831source /usr/share/fzf/completion.zsh
4832
4833# Accept history selection instead of putting it on
4834# the command line
4835fzf-history-widget-accept() {
4836 fzf-history-widget
4837 zle accept-line
4838}
4839#zle -N fzf-history-widget-accept
4840#bindkey '^R' fzf-history-widget-accept
4841
4842# alt+c preview
4843export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4844
4845### fzf ###
4846
4847
4848# aliases
4849alias mpv="mpv --ytdl-format mp4"
4850alias mv="mv -iv"
4851alias cp="cp -iv"
4852alias scl=systemctl
4853alias jcl=journalctl
4854alias m="mbsync -Va; getmail; notmuch new"
4855alias best="youtube-dl -f best"
4856alias nixx="ssh amin@nix.aminb.org"
4857alias fence="ssh aminb@fencepost.gnu.org"
4858
4859aur() {
4860 cd ~/usr/build
4861 git clone https://aur.archlinux.org/${1}.git
4862 cd ${1}
4863}
4864
4865# i-beam cursor
4866echo -e "\033[5 q"
4867#echo -e "\033[6 q"
4868#+end_src
4869
4870* Scripts
4871
4872This section contains various useful scripts and the ones used by the
4873programs above. For instance, =toggle-tablet= for switching to and
4874from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4875Xfce's presentation mode which keeps the screen awake, and
4876=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4877exact brightness value.
4878
4879** battery-percentage-time
4880:PROPERTIES:
4881:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/bash"
4882:END:
4883
4884#+begin_src bash
4885pct=$(upower -i /org/freedesktop/UPower/devices/battery_BAT0 | grep percentage | awk '{print $2}')
4886time=$(upower -i /org/freedesktop/UPower/devices/battery_BAT0 | grep time | awk '{print $4,$5}')
4887echo "$pct ($time)"
4888#+end_src
4889
4890** rofi-light
4891:PROPERTIES:
4892:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4893:END:
4894
4895#+begin_src bash
4896cur=$(light -G)
4897val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
4898light -S $val
4899#+end_src
4900
4901** s (run sway)
4902:PROPERTIES:
4903:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4904:END:
4905
4906#+begin_src bash
4907export _JAVA_AWT_WM_NONREPARENTING=1
4908export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4909light -Scrs "intel_backlight" 2
4910source $HOME/.zprofile
4911sway
4912#+end_src
4913
4914** sway-ws-util
4915:PROPERTIES:
4916:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4917:END:
4918
4919#+begin_src bash
4920curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4921[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4922[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4923dest_ws=-1
4924op=-1
4925
4926if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4927 op="$1"
4928 if [ "$2" = "prev" ]; then
4929 dest_ws="$prev_ws"
4930 elif [ "$2" = "next" ]; then
4931 dest_ws="$next_ws"
4932 else
4933 echo "Usage: $0 $1 {prev|next} [follow]"
4934 exit 1
4935 fi
4936else
4937 echo "Usage: $0 {switch|move} {prev|next} [follow]"
4938 exit 1
4939fi
4940
4941if [ "$op" = "switch" ]; then
4942 sway workspace "$dest_ws"
4943elif [ "$op" = "move" ]; then
4944 sway move container to workspace "$dest_ws"
4945 if [ "$3" = "follow" ]; then
4946 sway workspace "$dest_ws"
4947 fi
4948fi
4949#+end_src
4950
4951** toggle-layout
4952:PROPERTIES:
4953:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4954:END:
4955
4956#+begin_src bash
4957lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4958
4959if [ "$lang" = "us" ]; then
4960 setxkbmap ir
4961else
4962 setxkbmap us
4963 # xmodmap $HOME/.Xmodmap
4964fi
4965#+end_src
4966
4967** toggle-presentation-mode
4968:PROPERTIES:
4969:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4970:END:
4971
4972#+begin_src bash
4973xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4974#+end_src
4975
4976** toggle-tablet
4977:PROPERTIES:
4978:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4979:END:
4980
4981This script toggles between a 'normal' mode and a 'tablet' mode, doing
4982a few things:
4983
4984- rotates the screen using =xrandr=, so that rotating the physical
4985 display of my X220t would have the laptop's battery on the right
4986 hand side,
4987- enables touch screen,
4988- properly rotates the stylus pen and touch screen pointers, and
4989- toggles between RGB and Vertical BGR sub-pixel order.
4990
4991#+begin_src bash
4992case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4993 0) # Screen is not rotated, we should rotate it right (90°)
4994 xrandr -o 3
4995 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4996 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4997 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4998 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4999 ;;
5000 1) # Currently top is rotated right, we should set it normal (0°)
5001 xrandr -o 0
5002 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5003 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5004 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5005 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5006 ;;
5007 *)
5008 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5009 exit 1
5010 ;;
5011esac
5012#+end_src
5013
5014** unlock-def-gk.py
5015:PROPERTIES:
5016:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5017:END:
5018
5019#+begin_src python
5020import gnomekeyring as gk
5021# list_item_ids_sync('login')[0] == 1L
5022gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5023#+end_src
5024
5025** wp
5026
5027My little wallpaper changer script.
5028
5029*** wp
5030:PROPERTIES:
5031:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5032:END:
5033
5034#+begin_src bash :tangle no
5035export DISPLAY=:0
5036
5037case "$1" in
5038 "day")
5039 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5040 ;;
5041 "night")
5042 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5043 ;;
5044 *)
5045 echo $"Usage: $0 {day|night}"
5046 exit 1
5047esac
5048#+end_src
5049
5050*** wp-auto
5051:PROPERTIES:
5052:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5053:END:
5054
5055#+begin_src bash :tangle no
5056SED=$(which sed)
5057ROFI=$(which rofi)
5058
5059export DISPLAY=:0
5060HOUR=$(date +%H)
5061
5062if [ -z "${SED}" ]
5063then
5064 echo "Did not find 'sed', script cannot continue."
5065 exit 1
5066fi
5067if [ -z "${ROFI}" ]
5068then
5069 echo "Did not find rofi, there is no point to continue."
5070 exit 1
5071fi
5072
5073###
5074# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5075# Repeated calls should leave the config clean-ish
5076###
5077function set_theme()
5078{
5079 CDIR="${HOME}/.config/rofi/"
5080 if [ ! -d "${CDIR}" ]
5081 then
5082 mkdir -p ${CDIR}
5083 fi
5084 if [ -f "${CDIR}/config" ]
5085 then
5086 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5087 fi
5088 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5089
5090}
5091
5092if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5093 then
5094 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5095 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5096 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5097 else
5098 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5099 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5100 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5101fi
5102#+end_src
5103
5104*** wp.service
5105:PROPERTIES:
5106:header-args+: :tangle ~/.config/systemd/user/wp.service
5107:END:
5108
5109#+begin_src conf :tangle no
5110[Unit]
5111Description=wallpaper service
5112
5113[Service]
5114Type=oneshot
5115ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5116#+end_src
5117
5118*** wp.timer
5119:PROPERTIES:
5120:header-args+: :tangle ~/.config/systemd/user/wp.timer
5121:END:
5122
5123#+begin_src conf :tangle no
5124[Unit]
5125[Unit]
5126Description=wallpaper timer
5127
5128[Timer]
5129OnCalendar=07,21:00
5130Unit=wp.service
5131Persistent=true
5132
5133[Install]
5134WantedBy=timers.target
5135#+end_src
5136
5137** zathura-sync.sh
5138:PROPERTIES:
5139:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5140:END:
5141
5142#+begin_src sh
5143pos="$1"
5144pdffile="$2"
5145zathura --synctex-forward "$pos" "$pdffile" || \
5146 (
5147 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5148 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5149#+end_src
5150** Fun :)
5151
5152*** eat-em
5153:PROPERTIES:
5154:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5155:END:
5156
5157#+begin_src sh
5158# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5159# [ESC] character in original post removed here.
5160
5161# ANSI Color -- use these variables to easily have different color
5162# and format output. Make sure to output the reset sequence after
5163# colors (f = foreground, b = background), and use the 'off'
5164# feature for anything you turn on.
5165
5166initializeANSI()
5167{
5168 esc="$(echo -en '\e')"
5169
5170 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5171 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5172 cyanf="${esc}[36m"; whitef="${esc}[37m"
5173
5174 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5175 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5176 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5177
5178 boldon="${esc}[1m"; boldoff="${esc}[22m"
5179 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5180 ulon="${esc}[4m"; uloff="${esc}[24m"
5181 invon="${esc}[7m"; invoff="${esc}[27m"
5182
5183 reset="${esc}[0m"
5184}
5185
5186# note in this first use that switching colors doesn't require a reset
5187# first - the new color overrides the old one.
5188
5189#clear
5190
5191initializeANSI
5192
5193cat << EOF
5194
5195 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5196 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5197 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5198 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5199 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5200 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5201
5202 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5203 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5204 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5205 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5206 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5207 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5208
5209EOF
5210#+end_src
5211
5212*** invade-em
5213:PROPERTIES:
5214:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5215:END:
5216
5217#+begin_src bash
5218#
5219# ANSI color scheme script featuring Space Invaders
5220#
5221# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5222# Modified by lolilolicon
5223#
5224
5225f=3 b=4
5226for j in f b; do
5227 for i in {0..7}; do
5228 printf -v $j$i %b "\e[${!j}${i}m"
5229 done
5230done
5231bld=$'\e[1m'
5232rst=$'\e[0m'
5233
5234cat << EOF
5235
5236 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5237 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5238 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5239 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5240
5241 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5242 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5243 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5244 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5245
5246
5247 $f7▌$rst
5248
5249 $f7▌$rst
5250
5251 $f7 ▄█▄ $rst
5252 $f7▄█████████▄$rst
5253 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5254
5255EOF
5256#+end_src