[emacs/gnus] fix archive group
[~bandali/configs] / rc.org
1 #+title: rc.org
2 #+property: header-args :comments link :mkdirp yes :results silent
3
4 * About
5
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
9
10 Note: This file is best viewed inside Emacs with org mode.
11
12 * Configs
13
14 This section contains the configuration files (dotfiles) of various
15 programs I use.
16
17 ** bspwm
18
19 *** bspwmrc
20 :PROPERTIES:
21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22 :END:
23
24 #+begin_src sh :tangle no
25 sxhkd &
26 sh ~/.fehbg &
27 xfce4-panel -d &
28 compton &
29 sleep 0.5 && pasystray --notify=all &
30
31 bspc monitor -d I II III IV V VI VII VIII IX X
32 #bspc monitor eDP-1 -d I II III IV V
33 #bspc monitor HDMI-1 -d VI VII VIII IX X
34
35 #bspc config border_width 2
36 #bspc config window_gap 8
37 bspc config window_gap 0
38
39 bspc config bottom_padding 26
40
41 bspc config split_ratio 0.52
42 bspc config borderless_monocle true
43 bspc config gapless_monocle true
44 bspc config click_to_focus button1
45 bspc config directional_focus_tightness low
46
47 #bspc rule -a Firefox desktop='^1' follow=on
48 bspc rule -a Nightly desktop='^1' follow=on
49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
50 #bspc rule -a Chromium desktop='^4' follow=on
51 bspc rule -a URxvt state=floating
52 bspc rule -a URxvt:tiled state=tiled
53 bspc rule -a Connman-gtk state=floating
54 bspc rule -a Xfce4-panel state=floating
55 bspc rule -a TelegramDesktop state=floating
56 bspc rule -a Ec state=floating
57 bspc rule -a Pavucontrol state=floating
58 bspc rule -a Eog state=floating
59 bspc rule -a Seahorse state=floating
60 bspc rule -a mpv state=floating
61 bspc rule -a Evince state=floating
62 bspc rule -a Meld state=floating
63 bspc rule -a Autokey-gtk state=floating
64 bspc rule -a Mousepad state=floating
65 bspc rule -a Wrapper-1.0 state=floating
66 bspc rule -a File-roller state=floating
67 bspc rule -a Gnome-disks state=floating
68 bspc rule -a Termite state=floating
69 bspc rule -a Termite:tiled state=tiled
70 bspc rule -a Thunderbird:Calendar state=floating
71 bspc rule -a Audacity state=floating
72 bspc rule -a Proof state=floating # pvs x-show-proof
73 bspc rule -a Nm-connection-editor state=floating
74 bspc rule -a Wire state=floating
75 bspc rule -a discord state=floating
76 bspc rule -a X2goclient state=floating
77 bspc rule -a SimpleScreenRecorder state=floating
78 bspc rule -a Gimp state=floating
79 bspc rule -a Wrapper-2.0 state=floating
80 bspc rule -a Zathura state=tiled
81 #+end_src
82
83 *** sxhkdrc
84 :PROPERTIES:
85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86 :END:
87
88 #+begin_src conf :tangle no
89 #
90 # wm independent hotkeys
91 #
92
93 # terminal emulator
94 super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97 #super + {_,shift} + Return
98 # termite{_, --name=tiled}
99
100 # program launcher
101 super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104 super + alt + space
105 xfce4-popup-whiskermenu
106
107 # window finder
108 super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111 # password manager
112 alt + space
113 rofi-pass
114
115 # firefox
116 #super + r
117 # firefox
118
119 # chromium
120 #super + c
121 # chromium -incognito
122
123 # emacs
124 super + e
125 emacs
126
127 # make sxhkd reload its configuration files:
128 super + Escape
129 pkill -USR1 -x sxhkd
130
131 # volume {up,down}
132 XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135 # mute
136 XF86AudioMute
137 pamixer --toggle-mute
138
139 XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142 # playback control
143 XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146 # lock the screen
147 super + shift + q
148 light-locker-command -l
149
150 # Toggle keyboard layout
151 super + F7
152 toggle-layout
153
154 # Toggle Xfce presentation mode
155 XF86LaunchB
156 toggle-presentation-mode
157
158 # monitor brightness
159 XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162 super + apostrophe
163 rofi-light
164
165 # keyboard brightness
166 #XF86KbdBrightness{Up,Down}
167 # kbdlight {up,down}
168
169 XF86RotateWindows
170 toggle-tablet
171
172 #
173 # bspwm hotkeys
174 #
175
176 # quit bspwm normally
177 super + alt + Escape
178 bspc quit
179
180 # close and kill
181 super + {w,q}
182 bspc node -{c,k}
183
184 # alternate between the tiled and monocle layout
185 super + m
186 bspc desktop -l next
187
188 # send the newest marked node to the newest preselected node
189 super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192 # swap the current node and the biggest node
193 super + g
194 bspc node -s biggest
195
196 #
197 # state/flags
198 #
199
200 # set the window state
201 super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204 # set the node flags
205 super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208 #
209 # focus/swap
210 #
211
212 # focus the node in the given direction
213 super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216 # focus the node for the given path jump
217 super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220 # focus the next/previous node in the current desktop
221 super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224 # focus the next/previous desktop in the current monitor
225 super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228 # send to next/prev desktop
229 super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232 # focus the last node/desktop
233 super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236 # focus the older or newer node in the focus history
237 super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242 # focus or send to the given desktop
243 super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246 #
247 # preselect
248 #
249
250 # preselect the direction
251 super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254 # preselect the ratio
255 super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258 # cancel the preselection for the focused node
259 super + ctrl + space
260 bspc node -p cancel
261
262 # cancel the preselection for the focused desktop
263 super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266 #
267 # move/resize
268 #
269
270 # expand a window by moving one of its side outward
271 super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274 # contract a window by moving one of its side inward
275 super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278 # move a floating window
279 super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282 #alt + bracket{left,right}
283 # xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284 #+end_src
285
286 ** compton
287 :PROPERTIES:
288 :header-args+: :tangle ~/.config/compton.conf
289 :END:
290
291 #+begin_src conf :tangle no
292 # Shadow
293 shadow = false; # Enabled client-side shadows on windows.
294 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295 no-dnd-shadow = true; # Don't draw shadows on DND windows.
296 clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298 shadow-radius = 5; # The blur radius for shadows. (default 12)
299 shadow-offset-x = -5; # The left offset for shadows. (default -15)
300 shadow-offset-y = -5; # The top offset for shadows. (default -15)
301 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306 # shadow-exclude = "n:e:Notification";
307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311 # Opacity
312 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323 # blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326 # blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332 # Fading
333 fading = false; # Fade windows during opacity changes.
334 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338 fade-exclude = [ ]; # Exclude conditions for fading.
339
340 # Other
341 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355 dbe = false; # Enable DBE painting mode. Rarely needed.
356 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368 # GLX backend # GLX backend fine-tune options. See man page for more info.
369 glx-no-stencil = true; # Recommended.
370 glx-copy-from-front = false; # Useful with --glx-swap-method,
371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372 # glx-no-rebind-pixmap = true; # Recommended if it works.
373 glx-no-rebind-pixmap = true; # Recommended if it works.
374 #glx-swap-method = "4"; # See man page.
375 glx-swap-method = "4"; # See man page.
376
377 # Window type settings
378 wintypes:
379 {
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389 };
390 #+end_src
391
392 ** dovecot
393 :PROPERTIES:
394 :header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
395 :END:
396
397 #+begin_src conf
398 protocols = imap
399
400 listen = 127.0.0.1
401 log_path = /var/log/dovecot.log
402 info_log_path = /var/log/dovecot-info.log
403
404 ssl = no
405 disable_plaintext_auth = no
406
407 auth_verbose = yes
408 auth_mechanisms = plain
409
410 passdb {
411 driver = passwd-file
412 args = /etc/dovecot/passwd
413 }
414
415 userdb {
416 driver = static
417 args = uid=amin gid=amin home=/home/amin/mail/%d/%n
418 default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
419 }
420
421 # mail_home = /home/amin/mail/%d/%n
422 # mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
423
424 # namespace {
425 # inbox = yes
426 # separator = /
427 # }
428
429 mail_plugins = $mail_plugins fts fts_lucene
430
431 plugin {
432 fts = lucene
433 fts_lucene = whitespace_chars=@.
434 fts_autoindex = yes
435 }
436 #+end_src
437
438 ** Dunst
439 :PROPERTIES:
440 :header-args+: :tangle ~/.config/dunst/dunstrc
441 :END:
442
443 #+begin_src conf
444 [global]
445 #font = Ubuntu Mono 10.5
446 font = Inconsolata 11
447
448 # Path to default icons.
449 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
450
451 icon_position = left
452 # <b>bold</b>
453 # <i>italic</i>
454 # <s>strikethrough<s/>
455 # <u>underline</u>
456 markup = full
457 # The format of the message. Possible variables are:
458 # %a appname
459 # %s summary
460 # %b body
461 # %i iconname (including its path)
462 # %I iconname (without its path)
463 # %p progress value if set ([ 0%] to [100%]) or nothing
464 # Markup is allowed
465 format = "<b>%s</b>\n%b"
466 # Sort messages by urgency
467 sort = yes
468 # Show how many messages are currently hidden (because of geometry)
469 indicate_hiddenl= no
470 # Alignment of message text.
471 # Possible values are "left", "center" and "right"
472 alignment = center
473 # The frequency with wich text that is longer than the notification
474 # window allows bounces back and forth.
475 # This option conflicts with 'word_wrap'.
476 # Set to 0 to disable
477 bounce_freq = 3
478 # show age of message if message is older than show_age_threshold seconds.
479 # set to -1 to disable
480 show_age_threshold = -1
481 # split notifications into multiple lines if they don't fit into geometry
482 word_wrap = yes
483 # ignore newlines '\n' in notifications
484 ignore_newline = no
485 # The geometry of the message window.
486 # geometry [{width}]x{height}][+/-{x}+/-{y}]
487 # The height is measured in number of notifications everything else in pixels. If the width
488 # is omitted but the height is given ("-geometry x2"), the message window
489 # expands over the whole screen (dmenu-like). If width is 0,
490 # the window expands to the longest message displayed.
491 # A positive x is measured from the left, a negative from the
492 # right side of the screen. Y is measured from the top and down respectevly.
493 # The width can be negative. In this case the actual width is the
494 # screen width minus the width defined in within the geometry option.
495 #geometry = "410x12-12+12"
496 #geometry = "0x0-30-30"
497 geometry = "260x12-30-30"
498 # The transparency of the window. range: [0; 100]
499 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
500 transparency = 0
501 # Don't remove messages, if the user is idle (no mouse or keyboard input)
502 # for longer than idle_threshold seconds.
503 # Set to 0 to disable.
504 idle_threshold = 120
505 # Which monitor should the notifications be displayed on.
506 monitor = 0
507 # Display notification on focused monitor. Possible modes are:
508 # mouse: follow mouse pointer
509 # keyboard: follow window with keyboard focus
510 # none: don't follow anything
511 #
512 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
513 # This should be the case for almost all modern windowmanagers.
514 #
515 # If this option is set to mouse or keyboard, the monitor option will be
516 # ignored.
517 follow = keyboard
518 # should a notification popped up from history be sticky or
519 # timeout as if it would normally do.
520 sticky_history = yes
521 # The height of a single line. If the height is smaller than the font height,
522 # it will get raised to the font height.
523 # This adds empty space above and under the text.
524 line_height = 0
525
526 show_indicators = yes
527
528 # Draw a line of 'separatpr_height' pixel height between two notifications.
529 # Set to 0 to disable
530 separator_height = 3
531 # padding between text and separator
532 padding = 8
533 # horizontal padding
534 horizontal_padding = 8
535 # Define a color for the separator.
536 # possible values are:
537 # * auto: dunst tries to find a color fitting to the background
538 # * foreground: use the same color as the foreground
539 # * frame: use the same color as the frame.
540 # * anything else will be interpreted as a X color
541 separator_color = foreground
542 # print a notification on startup
543 # This is mainly for error detection, since dbus (re-)starts dunst
544 # automatically after a crash.
545 startup_notification = false
546 # dmenu path
547 #dmenu = /usr/bin/dmenu -p dunst:
548 dmenu = /usr/bin/rofi -dmenu -p dunst:
549 # browser for opening urls in context menu
550 browser = /usr/bin/firefox -new-tab
551 [frame]
552 width = 0
553 color = "#377222"
554 [shortcuts]
555 # shortcuts are specified as [modifier+][modifier+]...key
556 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
557 # and 'mod4' (windows-key)
558 # xev might be helpful to find names for keys
559 # close notification
560 close = ctrl+space
561 # close all notifications
562 close_all = ctrl+shift+space
563 # redisplay last message(s)
564 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
565 history = ctrl+shift+h
566 # context menu
567 context = ctrl+shift+period
568 [urgency_low]
569 # IMPORTANT: colors have to be defined in quotation marks.
570 # Otherwise the '#' and following would be interpreted as a comment.
571 background = "#1d2a30"
572 foreground = "#71c2af"
573 timeout = 3
574 [urgency_normal]
575 background = "#1d2a30"
576 foreground = "#71c2af"
577 timeout = 0
578 [urgency_critical]
579 background = "#1d2a30"
580 foreground = "#ff9982"
581 timeout = 0
582
583 # Every section that isn't one of the above is interpreted as a rules
584 # to override settings for certain messages.
585 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
586 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
587 # and 'format'.
588 # Shell-like globbing will get expanded.
589 #
590 # SCRIPTING
591 # you can specify a script that gets run when the rule matches by setting
592 # the 'script' option.
593 # The script will be called as follows:
594 # script appname summary body icon urgency
595 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
596 #
597 # NOTE: if you don't want a notification to be displayed, set the format to ""
598 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
599 # fitting options for rules.
600 #[espeak]
601 # summary = "*"
602 # script = dunst_espeak.sh
603 #[script-test]
604 # summary = "*script*"
605 # script = dunst_test.sh
606 #[ignore]
607 ## This notification will not be displayed
608 # summary = "foobar"
609 # format = ""
610 #[signed_on]
611 # appname = Pidgin
612 # summary = "*signed on*"
613 # urgency = low
614 #
615 #[signed_off]
616 # appname = Pidgin
617 # summary = *signed off*
618 # urgency = low
619 #
620 #[says]
621 # appname = Pidgin
622 # summary = *says*
623 # urgency = critical
624 #
625 #[twitter]
626 # appname = Pidgin
627 # summary = *twitter.com*
628 # urgency = normal
629 #
630 [xfpm-backlight]
631 summary = *Brightness*
632 urgency = low
633 #+end_src
634
635 ** Fontconfig
636 :PROPERTIES:
637 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
638 :END:
639
640 #+begin_src xml
641 <?xml version="1.0"?>
642 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
643 <fontconfig>
644 <match target="font">
645 <edit mode="assign" name="rgba">
646 <const>rgb</const>
647 </edit>
648 </match>
649 <match target="font">
650 <edit mode="assign" name="hinting">
651 <bool>true</bool>
652 </edit>
653 </match>
654 <match target="font">
655 <edit mode="assign" name="hintstyle">
656 <const>hintslight</const>
657 </edit>
658 </match>
659 <match target="font">
660 <edit mode="assign" name="antialias">
661 <bool>true</bool>
662 </edit>
663 </match>
664 <match target="font">
665 <edit mode="assign" name="lcdfilter">
666 <const>lcddefault</const>
667 </edit>
668 </match>
669 <dir>~/.fonts</dir>
670
671 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
672 <alias binding="same">
673 <family>Helvetica</family>
674 <prefer>
675 <family>Liberation Sans</family>
676 </prefer>
677 </alias>
678 </fontconfig>
679 #+end_src
680
681 ** getmail
682
683 *** getmailrc
684 :PROPERTIES:
685 :header-args+: :tangle ~/.getmail/getmailrc
686 :END:
687
688 #+begin_src conf
689 [retriever]
690 type = SimplePOP3SSLRetriever
691 server = fencepost.gnu.org
692 username = bandali
693 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
694 port = 995
695 use_apop = True
696
697 [destination]
698 type = Maildir
699 path = ~/mail/gnu/Inbox/
700
701 [options]
702 delete = True
703 #+end_src
704
705 *** getmail.service
706 :PROPERTIES:
707 :header-args+: :tangle ~/.config/systemd/user/getmail.service
708 :END:
709
710 #+begin_src conf :tangle no
711 [Unit]
712 Description=getmail service
713
714 [Service]
715 Type=oneshot
716 ExecStart=/usr/bin/getmail
717 StandardOutput=syslog
718 StandardError=syslog
719 #+end_src
720
721 *** getmail.timer
722 :PROPERTIES:
723 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
724 :END:
725
726 #+begin_src conf :tangle no
727 [Unit]
728 Description=getmail timer
729
730 [Timer]
731 OnCalendar=*:0/30
732 Persistent=true
733 Unit=getmail.service
734
735 [Install]
736 WantedBy=timers.target
737 #+end_src
738
739 ** Git
740
741 *** gitconfig
742 :PROPERTIES:
743 :header-args+: :tangle ~/.gitconfig
744 :END:
745
746 **** user
747 #+begin_src conf
748 [user]
749 name = Amin Bandali
750 email = bandali@gnu.org
751 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
752 #+end_src
753
754 **** signing
755 #+begin_src conf
756 [commit]
757 gpgsign = true
758 # [format]
759 # signoff = true
760 #+end_src
761
762 **** core
763 #+begin_src conf
764 [core]
765 autocrlf = input # CRLF -> LF on commit
766 editor = emacsclient -t
767 excludesfile = ~/.gitignore_global
768 pager = "less"
769 #+end_src
770
771 **** gpg
772 #+begin_src conf
773 [gpg]
774 program = gpg2
775 #+end_src
776
777 **** alias
778 #+begin_src conf
779 [alias]
780 git = !exec git # handle nested git calls, e.g. git git status
781 aliases = config --get-regexp '^alias\\.'
782 a = add
783 s = status
784 sl = status --long
785 c = checkout
786 cb = checkout -b
787 b = branch
788 r = rebase
789 p = pull
790 pr = pull --rebase
791 ps = push
792 psf = push --force
793 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
794 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
795 #+end_src
796
797 **** color
798 #+begin_src conf
799 [color]
800 ui = auto
801 [color "status"]
802 added = green bold
803 changed = red bold
804 untracked = red bold
805 [color "branch"]
806 current = green bold
807 remote = magenta bold
808 [color "diff"]
809 new = green bold
810 old = red bold
811 #+end_src
812
813 **** status
814 #+begin_src conf
815 [status]
816 # showUntrackedFiles = all
817 short=true
818 branch=true
819 #+end_src
820
821 **** github
822 #+begin_src conf
823 [github]
824 user = aminb
825 #+end_src
826
827 **** send-email
828 #+begin_src conf
829 [sendemail]
830 smtpuser = bandali
831 smtpserver = fencepost.gnu.org
832 smtpserverport = 587
833 smtpencryption = tls
834 annotate = yes
835 #+end_src
836
837 *** gitignore
838 :PROPERTIES:
839 :header-args+: :tangle ~/.gitignore_global
840 :END:
841
842 #+begin_src conf
843 *.orig
844 *.py[co]
845 *.sublime-workspace
846 *~
847 .DS_Store
848 *.elc
849 *-autoloads.el
850 #+end_src
851
852 ** GnuPG
853 :PROPERTIES:
854 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
855 :END:
856
857 #+begin_src conf
858 default-cache-ttl 43200
859 max-cache-ttl 43200
860
861 default-cache-ttl-ssh 10800
862 max-cache-ttl-ssh 10800
863
864 # pinentry-program /usr/bin/pinentry-qt
865 #+end_src
866
867 ** GTK
868
869 *** gtk-2.0
870 :PROPERTIES:
871 :header-args+: :tangle ~/.gtkrc-2.0
872 :END:
873
874 #+begin_src conf
875 gtk-theme-name="Greybird"
876 gtk-icon-theme-name="Paper"
877 gtk-font-name="Ubuntu 10"
878 gtk-menu-images=0
879 # gtk-key-theme-name = "Emacs"
880 #+end_src
881
882 *** gtk-3.0
883 :PROPERTIES:
884 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
885 :END:
886
887 #+begin_src conf :tangle no
888 [Settings]
889 gtk-icon-theme-name = Paper
890 # gtk-theme-name = Adwaita
891
892 gtk-theme-name = Greybird
893 # gtk-theme-name = Arc-Darker
894 # gtk-theme-name = Numix-ArchBlue
895
896 gtk-font-name = Ubuntu 10
897 # gtk-key-theme-name = Emacs
898 #+end_src
899
900 ** [[https://github.com/Leinnan/i3gs][i3gs]]
901 :PROPERTIES:
902 :header-args+: :tangle ~/.config/i3gs/config
903 :END:
904
905 #+begin_src conf :comments none :tangle no
906 borders_width=0 0 2 0
907 separator_width=10
908
909 #[mpd]
910 #preset=MPD
911 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
912 #borders_color=#7FDBFF
913
914 [ram]
915 preset=RAM
916 title=<span weight='heavy' fgcolor='#3D9970'> </span>
917 borders_color=#3D9970
918
919 #[cpu]
920 #preset=CPU
921 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
922 #borders_color=#2ECC40
923
924 #[hdd]
925 #preset=HDD
926 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
927 #borders_color=#01FF70
928
929 [volume]
930 command=volume-info
931 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
932 borders_color=#7FDBFF
933
934 [battery]
935 preset=BAT
936 command=battery-percentage-time
937 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
938 borders_color=#39CCCC
939
940 [wifi]
941 preset=WIFI
942 title=<span weight='heavy' fgcolor='#01FF70'> </span>
943 borders_color=#01FF70
944
945 [date]
946 preset=DATE
947 command=date '+%-I:%M, %a %b %d '
948 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
949 borders_color=#FFDC00
950 separator_width=0
951 #+end_src
952
953 ** i3status
954 :PROPERTIES:
955 :header-args+: :tangle ~/.config/i3status/config
956 :END:
957
958 #+begin_src conf :comments none
959 # i3status configuration file.
960 # see "man i3status" for documentation.
961
962 # It is important that this file is edited as UTF-8.
963 # The following line should contain a sharp s:
964 # ß
965 # If the above line is not correctly displayed, fix your editor first!
966
967 general {
968 colors = true
969 interval = 5
970 output_format = "i3bar"
971 }
972
973 # order += "ipv6"
974 order += "disk /"
975 order += "disk /data"
976 order += "wireless _first_"
977 order += "ethernet _first_"
978 order += "battery 0"
979 order += "volume master"
980 order += "load"
981 order += "tztime local"
982
983 wireless _first_ {
984 format_up = "W:%quality %essid %ip"
985 format_down = "W: down"
986 }
987
988 ethernet _first_ {
989 # if you use %speed, i3status requires root privileges
990 format_up = "E: %ip (%speed)"
991 format_down = "E: down"
992 }
993
994 battery 0 {
995 format = "%status %percentage %remaining (%consumption)"
996 path = "/sys/class/power_supply/BAT%d/uevent"
997 low_threshold = "10"
998 threshold_type = "percentage"
999 last_full_capacity = true
1000 integer_battery_capacity = true
1001 hide_seconds = true
1002 }
1003
1004 tztime local {
1005 format = "%-I:%M%P %a %b %d"
1006 }
1007
1008 volume master {
1009 format = "♪ %volume"
1010 format_muted = "🔇 %volume"
1011 device = "pulse"
1012 }
1013
1014 load {
1015 format = "%1min"
1016 }
1017
1018 disk "/" {
1019 format = "/ %avail"
1020 }
1021
1022 disk "/data" {
1023 format = "/data %avail"
1024 }
1025 #+end_src
1026
1027 ** isync
1028
1029 *** mbsyncrc
1030 :PROPERTIES:
1031 :header-args+: :tangle ~/.mbsyncrc
1032 :END:
1033
1034 #+begin_src conf
1035 # Global defaults
1036 CopyArrivalDate yes
1037 Create Both
1038 Expunge Both
1039
1040 ######
1041 IMAPAccount amin
1042 Host mail.aminb.org
1043 User amin@aminb.org
1044 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
1045 SSLType IMAPS
1046
1047 IMAPStore amin-remote
1048 Account amin
1049
1050 IMAPAccount amin-dovecot
1051 Host 127.0.0.1
1052 Port 143
1053 User amin@aminb.org
1054 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
1055 SSLType None
1056
1057 IMAPStore amin-local
1058 Account amin-dovecot
1059
1060 Channel amin
1061 Master :amin-remote:
1062 Slave :amin-local:
1063 Patterns *
1064
1065 ######
1066 IMAPAccount uwaterloo
1067 Host connect.uwaterloo.ca
1068 User abandali
1069 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1070 SSLType IMAPS
1071
1072 IMAPStore uwaterloo-remote
1073 Account uwaterloo
1074
1075 IMAPAccount uwaterloo-dovecot
1076 Host 127.0.0.1
1077 Port 143
1078 User abandali@uwaterloo.ca
1079 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
1080 SSLType None
1081
1082 IMAPStore uwaterloo-local
1083 Account uwaterloo-dovecot
1084
1085 Channel uwaterloo
1086 Master :uwaterloo-remote:
1087 Slave :uwaterloo-local:
1088 Patterns *
1089 #+end_src
1090
1091 *** mbsync.service
1092 :PROPERTIES:
1093 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1094 :END:
1095
1096 #+begin_src conf :tangle no
1097 [Unit]
1098 Description=mbsync service
1099
1100 [Service]
1101 Type=oneshot
1102 ExecStart=/usr/bin/mbsync -Va
1103 StandardOutput=syslog
1104 StandardError=syslog
1105 #+end_src
1106
1107 *** mbsync.timer
1108 :PROPERTIES:
1109 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1110 :END:
1111
1112 #+begin_src conf :tangle no
1113 [Unit]
1114 Description=mbsync timer
1115
1116 [Timer]
1117 OnCalendar=*:0/15
1118 Persistent=true
1119 Unit=mbsync.service
1120
1121 [Install]
1122 WantedBy=timers.target
1123 #+end_src
1124
1125 ** Latexmk
1126 :PROPERTIES:
1127 :header-args+: :tangle ~/.latexmkrc
1128 :END:
1129
1130 #+begin_src conf
1131 $pdf_previewer = "start zathura %O %S";
1132 $clean_ext = "aux out";
1133
1134 # $pdf_update_method = 4;
1135 # $pdf_update_command = "zathura %O %S";
1136
1137 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1138 # by Ctrl+click in the PDF.
1139 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1140 # editor.
1141 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1142 #+end_src
1143
1144 ** libinput
1145
1146 Improve XPS 15 9560's touchpad experience.
1147
1148 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1149 #+begin_src conf :tangle no
1150 Section "InputClass"
1151 Identifier "libinput touchpad catchall"
1152 Driver "libinput"
1153 MatchIsTouchpad "on"
1154 Option "ClickMethod" "clickfinger"
1155 Option "NaturalScrolling" "true"
1156 Option "Tapping" "on"
1157 Option "TappingButtonMap" "lrm"
1158 EndSection
1159 #+end_src
1160
1161 ** mpd
1162 :PROPERTIES:
1163 :header-args+: :tangle ~/.config/mpd/mpd.conf
1164 :END:
1165
1166 #+begin_src conf
1167 # An example configuration file for MPD.
1168 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1169
1170
1171 # Files and directories #######################################################
1172 #
1173 # This setting controls the top directory which MPD will search to discover the
1174 # available audio files and add them to the daemon's online database. This
1175 # setting defaults to the XDG directory, otherwise the music directory will be
1176 # be disabled and audio files will only be accepted over ipc socket (using
1177 # file:// protocol) or streaming files over an accepted protocol.
1178 #
1179 music_directory "~/usr/music"
1180 #
1181 # This setting sets the MPD internal playlist directory. The purpose of this
1182 # directory is storage for playlists created by MPD. The server will use
1183 # playlist files not created by the server but only if they are in the MPD
1184 # format. This setting defaults to playlist saving being disabled.
1185 #
1186 playlist_directory "~/.mpd/playlists"
1187 #
1188 # This setting sets the location of the MPD database. This file is used to
1189 # load the database at server start up and store the database while the
1190 # server is not up. This setting defaults to disabled which will allow
1191 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1192 # files over an accepted protocol.
1193 #
1194 db_file "~/.mpd/database"
1195 #
1196 # These settings are the locations for the daemon log files for the daemon.
1197 # These logs are great for troubleshooting, depending on your log_level
1198 # settings.
1199 #
1200 # The special value "syslog" makes MPD use the local syslog daemon. This
1201 # setting defaults to logging to syslog, otherwise logging is disabled.
1202 #
1203 log_file "~/.mpd/log"
1204 #
1205 # This setting sets the location of the file which stores the process ID
1206 # for use of mpd --kill and some init scripts. This setting is disabled by
1207 # default and the pid file will not be stored.
1208 #
1209 pid_file "~/.mpd/pid"
1210 #
1211 # This setting sets the location of the file which contains information about
1212 # most variables to get MPD back into the same general shape it was in before
1213 # it was brought down. This setting is disabled by default and the server
1214 # state will be reset on server start up.
1215 #
1216 state_file "~/.mpd/state"
1217 #
1218 # The location of the sticker database. This is a database which
1219 # manages dynamic information attached to songs.
1220 #
1221 sticker_file "~/.mpd/sticker.sql"
1222 #
1223 ###############################################################################
1224
1225
1226 # General music daemon options ################################################
1227 #
1228 # This setting specifies the user that MPD will run as. MPD should never run as
1229 # root and you may use this setting to make MPD change its user ID after
1230 # initialization. This setting is disabled by default and MPD is run as the
1231 # current user.
1232 #
1233 #user "nobody"
1234 #
1235 # This setting specifies the group that MPD will run as. If not specified
1236 # primary group of user specified with "user" setting will be used (if set).
1237 # This is useful if MPD needs to be a member of group such as "audio" to
1238 # have permission to use sound card.
1239 #
1240 #group "nogroup"
1241 #
1242 # This setting sets the address for the daemon to listen on. Careful attention
1243 # should be paid if this is assigned to anything other then the default, any.
1244 # This setting can deny access to control of the daemon. Not effective if
1245 # systemd socket activiation is in use.
1246 #
1247 # For network
1248 #bind_to_address "any"
1249 #
1250 # And for Unix Socket
1251 #bind_to_address "~/.mpd/socket"
1252 #
1253 # This setting is the TCP port that is desired for the daemon to get assigned
1254 # to.
1255 #
1256 #port "6600"
1257 #
1258 # This setting controls the type of information which is logged. Available
1259 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1260 # argument is recommended for troubleshooting, though can quickly stretch
1261 # available resources on limited hardware storage.
1262 #
1263 #log_level "default"
1264 #
1265 # If you have a problem with your MP3s ending abruptly it is recommended that
1266 # you set this argument to "no" to attempt to fix the problem. If this solves
1267 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1268 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1269 # point gapless MP3 playback can be enabled.
1270 #
1271 #gapless_mp3_playback "yes"
1272 #
1273 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1274 # of starting playback after startup.
1275 #
1276 #restore_paused "no"
1277 #
1278 # This setting enables MPD to create playlists in a format usable by other
1279 # music players.
1280 #
1281 #save_absolute_paths_in_playlists "no"
1282 #
1283 # This setting defines a list of tag types that will be extracted during the
1284 # audio file discovery process. The complete list of possible values can be
1285 # found in the user manual.
1286 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1287 #
1288 # This setting enables automatic update of MPD's database when files in
1289 # music_directory are changed.
1290 #
1291 #auto_update "yes"
1292 #
1293 # Limit the depth of the directories being watched, 0 means only watch
1294 # the music directory itself. There is no limit by default.
1295 #
1296 #auto_update_depth "3"
1297 #
1298 ###############################################################################
1299
1300
1301 # Symbolic link behavior ######################################################
1302 #
1303 # If this setting is set to "yes", MPD will discover audio files by following
1304 # symbolic links outside of the configured music_directory.
1305 #
1306 #follow_outside_symlinks "yes"
1307 #
1308 # If this setting is set to "yes", MPD will discover audio files by following
1309 # symbolic links inside of the configured music_directory.
1310 #
1311 #follow_inside_symlinks "yes"
1312 #
1313 ###############################################################################
1314
1315
1316 # Zeroconf / Avahi Service Discovery ##########################################
1317 #
1318 # If this setting is set to "yes", service information will be published with
1319 # Zeroconf / Avahi.
1320 #
1321 #zeroconf_enabled "yes"
1322 #
1323 # The argument to this setting will be the Zeroconf / Avahi unique name for
1324 # this MPD server on the network.
1325 #
1326 #zeroconf_name "Music Player"
1327 #
1328 ###############################################################################
1329
1330
1331 # Permissions #################################################################
1332 #
1333 # If this setting is set, MPD will require password authorization. The password
1334 # setting can be specified multiple times for different password profiles.
1335 #
1336 #password "password@read,add,control,admin"
1337 #
1338 # This setting specifies the permissions a user has who has not yet logged in.
1339 #
1340 #default_permissions "read,add,control,admin"
1341 #
1342 ###############################################################################
1343
1344
1345 # Database #######################################################################
1346 #
1347
1348 #database {
1349 # plugin "proxy"
1350 # host "other.mpd.host"
1351 # port "6600"
1352 #}
1353
1354 # Input #######################################################################
1355 #
1356
1357 input {
1358 plugin "curl"
1359 # proxy "proxy.isp.com:8080"
1360 # proxy_user "user"
1361 # proxy_password "password"
1362 }
1363
1364 #
1365 ###############################################################################
1366
1367 # Audio Output ################################################################
1368 #
1369
1370 audio_output {
1371 type "pulse"
1372 name "pulse audio"
1373 }
1374
1375 audio_output {
1376 type "fifo"
1377 name "my_fifo"
1378 path "/tmp/mpd.fifo"
1379 format "44100:16:2"
1380 }
1381
1382 # MPD supports various audio output types, as well as playing through multiple
1383 # audio outputs at the same time, through multiple audio_output settings
1384 # blocks. Setting this block is optional, though the server will only attempt
1385 # autodetection for one sound card.
1386 #
1387 # An example of an ALSA output:
1388 #
1389 #audio_output {
1390 # type "alsa"
1391 # name "My ALSA Device"
1392 ## device "hw:0,0" # optional
1393 ## mixer_type "hardware" # optional
1394 ## mixer_device "default" # optional
1395 ## mixer_control "PCM" # optional
1396 ## mixer_index "0" # optional
1397 #}
1398 #
1399 # An example of an OSS output:
1400 #
1401 #audio_output {
1402 # type "oss"
1403 # name "My OSS Device"
1404 ## device "/dev/dsp" # optional
1405 ## mixer_type "hardware" # optional
1406 ## mixer_device "/dev/mixer" # optional
1407 ## mixer_control "PCM" # optional
1408 #}
1409 #
1410 # An example of a shout output (for streaming to Icecast):
1411 #
1412 #audio_output {
1413 # type "shout"
1414 # encoder "vorbis" # optional
1415 # name "My Shout Stream"
1416 # host "localhost"
1417 # port "8000"
1418 # mount "/mpd.ogg"
1419 # password "hackme"
1420 # quality "5.0"
1421 # bitrate "128"
1422 # format "44100:16:1"
1423 ## protocol "icecast2" # optional
1424 ## user "source" # optional
1425 ## description "My Stream Description" # optional
1426 ## url "http://example.com" # optional
1427 ## genre "jazz" # optional
1428 ## public "no" # optional
1429 ## timeout "2" # optional
1430 ## mixer_type "software" # optional
1431 #}
1432 #
1433 # An example of a recorder output:
1434 #
1435 #audio_output {
1436 # type "recorder"
1437 # name "My recorder"
1438 # encoder "vorbis" # optional, vorbis or lame
1439 # path "/var/lib/mpd/recorder/mpd.ogg"
1440 ## quality "5.0" # do not define if bitrate is defined
1441 # bitrate "128" # do not define if quality is defined
1442 # format "44100:16:1"
1443 #}
1444 #
1445 # An example of a httpd output (built-in HTTP streaming server):
1446 #
1447 #audio_output {
1448 # type "httpd"
1449 # name "My HTTP Stream"
1450 # encoder "vorbis" # optional, vorbis or lame
1451 # port "8000"
1452 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1453 ## quality "5.0" # do not define if bitrate is defined
1454 # bitrate "128" # do not define if quality is defined
1455 # format "44100:16:1"
1456 # max_clients "0" # optional 0=no limit
1457 #}
1458 #
1459 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1460 #
1461 #audio_output {
1462 # type "pulse"
1463 # name "My Pulse Output"
1464 ## server "remote_server" # optional
1465 ## sink "remote_server_sink" # optional
1466 #}
1467 #
1468 # An example of a winmm output (Windows multimedia API).
1469 #
1470 #audio_output {
1471 # type "winmm"
1472 # name "My WinMM output"
1473 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1474 # or
1475 ## device "0" # optional
1476 ## mixer_type "hardware" # optional
1477 #}
1478 #
1479 # An example of an openal output.
1480 #
1481 #audio_output {
1482 # type "openal"
1483 # name "My OpenAL output"
1484 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1485 #}
1486 #
1487 # An example of an sndio output.
1488 #
1489 #audio_output {
1490 # type "sndio"
1491 # name "sndio output"
1492 # mixer_type "software"
1493 #}
1494 #
1495 # An example of an OS X output:
1496 #
1497 #audio_output {
1498 # type "osx"
1499 # name "My OS X Device"
1500 ## device "Built-in Output" # optional
1501 ## channel_map "-1,-1,0,1" # optional
1502 #}
1503 #
1504 ## Example "pipe" output:
1505 #
1506 #audio_output {
1507 # type "pipe"
1508 # name "my pipe"
1509 # command "aplay -f cd 2>/dev/null"
1510 ## Or if you're want to use AudioCompress
1511 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1512 ## Or to send raw PCM stream through PCM:
1513 # command "nc example.org 8765"
1514 # format "44100:16:2"
1515 #}
1516 #
1517 ## An example of a null output (for no audio output):
1518 #
1519 #audio_output {
1520 # type "null"
1521 # name "My Null Output"
1522 # mixer_type "none" # optional
1523 #}
1524 #
1525 ###############################################################################
1526
1527
1528 # Normalization automatic volume adjustments ##################################
1529 #
1530 # This setting specifies the type of ReplayGain to use. This setting can have
1531 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1532 # chooses between "track" and "album" depending on the current state of
1533 # random playback. If random playback is enabled then "track" mode is used.
1534 # See <http://www.replaygain.org> for more details about ReplayGain.
1535 # This setting is off by default.
1536 #
1537 #replaygain "album"
1538 #
1539 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1540 # default this setting is disabled.
1541 #
1542 #replaygain_preamp "0"
1543 #
1544 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1545 # By default this setting is disabled.
1546 #
1547 #replaygain_missing_preamp "0"
1548 #
1549 # This setting enables or disables ReplayGain limiting.
1550 # MPD calculates actual amplification based on the ReplayGain tags
1551 # and replaygain_preamp / replaygain_missing_preamp setting.
1552 # If replaygain_limit is enabled MPD will never amplify audio signal
1553 # above its original level. If replaygain_limit is disabled such amplification
1554 # might occur. By default this setting is enabled.
1555 #
1556 #replaygain_limit "yes"
1557 #
1558 # This setting enables on-the-fly normalization volume adjustment. This will
1559 # result in the volume of all playing audio to be adjusted so the output has
1560 # equal "loudness". This setting is disabled by default.
1561 #
1562 #volume_normalization "no"
1563 #
1564 ###############################################################################
1565
1566 # Character Encoding ##########################################################
1567 #
1568 # If file or directory names do not display correctly for your locale then you
1569 # may need to modify this setting.
1570 #
1571 #filesystem_charset "UTF-8"
1572 #
1573 ###############################################################################
1574 #+end_src
1575
1576 ** msmtp
1577 :PROPERTIES:
1578 :header-args+: :tangle ~/.msmtprc
1579 :END:
1580
1581 #+begin_src conf
1582 # Set default values for all following accounts.
1583 defaults
1584 port 587
1585 tls on
1586 auth on
1587 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1588 logfile ~/.msmtp.log
1589
1590 # aminb
1591 account aminb
1592 host mail.aminb.org
1593 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1594 tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
1595 tls_starttls on
1596 from amin@aminb.org
1597 user amin@aminb.org
1598 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1599
1600 # gnu
1601 account gnu
1602 host fencepost.gnu.org
1603 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1604 tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3
1605 tls_starttls on
1606 from bandali@gnu.org
1607 user bandali
1608 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1609
1610 # gnu (old)
1611 account gnu-aminb : gnu
1612 from aminb@gnu.org
1613 account gnu-amin : gnu
1614 from amin@gnu.org
1615 account gnu-mab : gnu
1616 from mab@gnu.org
1617
1618 # uwaterloo
1619 account uwaterloo
1620 host connect.uwaterloo.ca
1621 tls_starttls on
1622 from abandali@uwaterloo.ca
1623 user abandali
1624 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1625 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1626
1627 # Set a default account
1628 account default : aminb
1629 #+end_src
1630
1631 ** ncmpcpp
1632
1633 *** config
1634 :PROPERTIES:
1635 :header-args+: :tangle ~/.ncmpcpp/config
1636 :END:
1637
1638 #+begin_src conf :tangle no
1639 ##############################################################
1640 ## This is the example configuration file. Copy it to ##
1641 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1642 ## and set up your preferences. ##
1643 ##############################################################
1644 #
1645 ##### directories ######
1646 ##
1647 ## Directory for storing ncmpcpp related files.
1648 ## Changing it is useful if you want to store
1649 ## everything somewhere else and provide command
1650 ## line setting for alternative location to config
1651 ## file which defines that while launching ncmpcpp.
1652 ##
1653 #
1654 ncmpcpp_directory = ~/.ncmpcpp
1655 #
1656 ##
1657 ## Directory for storing downloaded lyrics. It
1658 ## defaults to ~/.lyrics since other MPD clients
1659 ## (eg. ncmpc) also use that location.
1660 ##
1661 #
1662 #lyrics_directory = ~/.lyrics
1663 #
1664 ##### connection settings #####
1665 #
1666 #mpd_host = localhost
1667 #
1668 #mpd_port = 6600
1669 #
1670 #mpd_connection_timeout = 5
1671 #
1672 ## Needed for tag editor and file operations to work.
1673 ##
1674 mpd_music_dir = ~/usr/music
1675 #
1676 #mpd_crossfade_time = 5
1677 #
1678 ##### music visualizer #####
1679 ##
1680 ## Note: In order to make music visualizer work you'll
1681 ## need to use mpd fifo output, whose format parameter
1682 ## has to be set to 44100:16:1 for mono visualization
1683 ## or 44100:16:2 for stereo visualization. Example
1684 ## configuration (it has to be put into mpd.conf):
1685 ##
1686 ## audio_output {
1687 ## type "fifo"
1688 ## name "Visualizer feed"
1689 ## path "/tmp/mpd.fifo"
1690 ## format "44100:16:2"
1691 ## }
1692 ##
1693 #
1694 visualizer_fifo_path = /tmp/mpd.fifo
1695 #
1696 ##
1697 ## Note: Below parameter is needed for ncmpcpp
1698 ## to determine which output provides data for
1699 ## visualizer and thus allow syncing between
1700 ## visualization and sound as currently there
1701 ## are some problems with it.
1702 ##
1703 #
1704 visualizer_output_name = my fifo
1705 #
1706 ##
1707 ## If you set format to 44100:16:2, make it 'yes'.
1708 ##
1709 visualizer_in_stereo = yes
1710 #
1711 ##
1712 ## Multiply received samples by given value. Very
1713 ## useful for proper visualization of quiet music.
1714 ##
1715 #visualizer_sample_multiplier = 1
1716 #
1717 ##
1718 ## Note: Below parameter defines how often ncmpcpp
1719 ## has to "synchronize" visualizer and audio outputs.
1720 ## 30 seconds is optimal value, but if you experience
1721 ## synchronization problems, set it to lower value.
1722 ## Keep in mind that sane values start with >=10.
1723 ##
1724 #
1725 visualizer_sync_interval = 30
1726 #
1727 ##
1728 ## Note: To enable spectrum frequency visualization
1729 ## you need to compile ncmpcpp with fftw3 support.
1730 ##
1731 #
1732 ## Available values: spectrum, wave, wave_filled, ellipse.
1733 ##
1734 visualizer_type = spectrum
1735 #
1736 #visualizer_look = ●▮
1737 visualizer_look = "●•"
1738 #
1739 #visualizer_color = blue, cyan, green, yellow, magenta, red
1740 #
1741 ## Alternative subset of 256 colors for terminals that support it.
1742 ##
1743 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1744 #
1745 ##### system encoding #####
1746 ##
1747 ## ncmpcpp should detect your charset encoding
1748 ## but if it failed to do so, you can specify
1749 ## charset encoding you are using here.
1750 ##
1751 ## Note: You can see whether your ncmpcpp build
1752 ## supports charset detection by checking output
1753 ## of `ncmpcpp --version`.
1754 ##
1755 ## Note: Since MPD uses UTF-8 by default, setting
1756 ## this option makes sense only if your encoding
1757 ## is different.
1758 ##
1759 #
1760 #system_encoding = ""
1761 #
1762 ##### delays #####
1763 #
1764 ## Time of inactivity (in seconds) after playlist
1765 ## highlighting will be disabled (0 = always on).
1766 ##
1767 #playlist_disable_highlight_delay = 5
1768 #
1769 ## Defines how long messages are supposed to be visible.
1770 ##
1771 #message_delay_time = 5
1772 #
1773 ##### song format #####
1774 ##
1775 ## For a song format you can use:
1776 ##
1777 ## %l - length
1778 ## %f - filename
1779 ## %D - directory
1780 ## %a - artist
1781 ## %A - album artist
1782 ## %t - title
1783 ## %b - album
1784 ## %y - date
1785 ## %n - track number (01/12 -> 01)
1786 ## %N - full track info (01/12 -> 01/12)
1787 ## %g - genre
1788 ## %c - composer
1789 ## %p - performer
1790 ## %d - disc
1791 ## %C - comment
1792 ## %P - priority
1793 ## $R - begin right alignment
1794 ##
1795 ## If you want to make sure that a part of the format is displayed
1796 ## only when certain tags are present, you can archieve it by
1797 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1798 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1799 ## It is also possible to define a list of alternatives by providing
1800 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1801 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1802 ## present.
1803 ##
1804 ## Note: If you want to set limit on maximal length of a tag, just
1805 ## put the appropriate number between % and character that defines
1806 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1807 ##
1808 ## In addition, formats support markers used for text attributes.
1809 ## They are followed by character '$'. After that you can put:
1810 ##
1811 ## - 0 - default window color (discards all other colors)
1812 ## - 1 - black
1813 ## - 2 - red
1814 ## - 3 - green
1815 ## - 4 - yellow
1816 ## - 5 - blue
1817 ## - 6 - magenta
1818 ## - 7 - cyan
1819 ## - 8 - white
1820 ## - 9 - end of current color
1821 ## - b - bold text
1822 ## - u - underline text
1823 ## - r - reverse colors
1824 ## - a - use alternative character set
1825 ##
1826 ## If you don't want to use a non-color attribute anymore, just put it
1827 ## again, but this time insert character '/' between '$' and attribute
1828 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1829 ## or filename with reversed colors.
1830 ##
1831 ## If you want to use 256 colors and/or background colors in formats
1832 ## (the naming scheme is described below in section about color
1833 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1834 ## the artist tag to one of the non-standard colors and make it have
1835 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1836 ## that for standard colors this is interchangable with attributes
1837 ## listed above.
1838 ##
1839 ## Note: colors can be nested.
1840 ##
1841 #
1842 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1843 #
1844 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1845 #
1846 #song_library_format = {%n - }{%t}|{%f}
1847 #
1848 #
1849 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1850 #
1851 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1852 #
1853 #now_playing_prefix = $b
1854 #
1855 #now_playing_suffix = $/b
1856 #
1857 #browser_playlist_prefix = "$2playlist$9 "
1858 #
1859 #selected_item_prefix = $6
1860 #
1861 #selected_item_suffix = $9
1862 #
1863 #modified_item_prefix = $3> $9
1864 #
1865 ##
1866 ## Note: attributes are not supported for the following variables.
1867 ##
1868 #song_window_title_format = {%a - }{%t}|{%f}
1869 ##
1870 ## Note: Below variables are used for sorting songs in browser.
1871 ## The sort mode determines how songs are sorted, and can be used
1872 ## in combination with a sort format to specify a custom sorting format.
1873 ## Available values for browser_sort_mode are "name", "mtime", "format"
1874 ## and "noop".
1875 ##
1876 #
1877 #browser_sort_mode = name
1878 #
1879 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1880 #
1881 ##### columns settings #####
1882 ##
1883 ## syntax of song columns list format is "column column etc."
1884 ##
1885 ## - syntax for each column is:
1886 ##
1887 ## (width of the column)[color of the column]{displayed tag}
1888 ##
1889 ## Note: Width is by default in %, if you want a column to
1890 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1891 ## will be the column that take 10% of screen (so the real width
1892 ## will depend on actual screen size), whereas (10f)[white]{a}
1893 ## will take 10 terminal cells, no matter how wide the screen is.
1894 ##
1895 ## - color is optional (if you want the default one,
1896 ## leave the field empty).
1897 ##
1898 ## Note: You can give a column additional attributes by putting appropriate
1899 ## character after displayed tag character. Available attributes are:
1900 ##
1901 ## - r - column will be right aligned
1902 ## - E - if tag is empty, empty tag marker won't be displayed
1903 ##
1904 ## You can also:
1905 ##
1906 ## - give a column custom name by putting it after attributes,
1907 ## separated with character ':', e.g. {lr:Length} gives you
1908 ## right aligned column of lengths named "Length".
1909 ##
1910 ## - define sequence of tags, that have to be displayed in case
1911 ## predecessor is empty in a way similar to the one in classic
1912 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1913 ## creates column named "Owner" that tries to display artist
1914 ## tag and then composer and performer if previous ones are
1915 ## not available.
1916 ##
1917 #
1918 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1919 #
1920 ##### various settings #####
1921 #
1922 ##
1923 ## Note: Custom command that will be executed each
1924 ## time song changes. Useful for notifications etc.
1925 ##
1926 #execute_on_song_change = ""
1927 #
1928 #playlist_show_mpd_host = no
1929 #
1930 #playlist_show_remaining_time = no
1931 #
1932 #playlist_shorten_total_times = no
1933 #
1934 #playlist_separate_albums = no
1935 #
1936 ##
1937 ## Note: Possible display modes: classic, columns.
1938 ##
1939 #playlist_display_mode = columns
1940 #
1941 #browser_display_mode = classic
1942 #
1943 #search_engine_display_mode = classic
1944 #
1945 #playlist_editor_display_mode = classic
1946 #
1947 #discard_colors_if_item_is_selected = yes
1948 #
1949 #incremental_seeking = yes
1950 #
1951 #seek_time = 1
1952 #
1953 #volume_change_step = 2
1954 #
1955 #autocenter_mode = no
1956 #
1957 #centered_cursor = no
1958 #
1959 ##
1960 ## Note: You can specify third character which will
1961 ## be used to build 'empty' part of progressbar.
1962 ##
1963 #progressbar_look = =>
1964 progressbar_look = "─╼╶"
1965 #progressbar_look = "─⊙╶"
1966 #
1967 #progressbar_boldness = yes
1968 #
1969 ## Available values: database, playlist.
1970 ##
1971 #default_place_to_search_in = database
1972 #
1973 ## Available values: classic, alternative.
1974 ##
1975 #user_interface = classic
1976 #
1977 #data_fetching_delay = yes
1978 #
1979 ## Available values: artist, album_artist, date, genre, composer, performer.
1980 ##
1981 #media_library_primary_tag = artist
1982 #
1983 ## Available values: wrapped, normal.
1984 ##
1985 #default_find_mode = wrapped
1986 #
1987 #default_tag_editor_pattern = %n - %t
1988 #
1989 #header_visibility = yes
1990 #
1991 #statusbar_visibility = yes
1992 #
1993 #titles_visibility = yes
1994 #
1995 #header_text_scrolling = yes
1996 #
1997 #cyclic_scrolling = no
1998 #
1999 #lines_scrolled = 2
2000 #
2001 #follow_now_playing_lyrics = no
2002 #
2003 #fetch_lyrics_for_current_song_in_background = no
2004 #
2005 #store_lyrics_in_song_dir = no
2006 #
2007 #generate_win32_compatible_filenames = yes
2008 #
2009 #allow_for_physical_item_deletion = no
2010 #
2011 ##
2012 ## Note: If you set this variable, ncmpcpp will try to
2013 ## get info from last.fm in language you set and if it
2014 ## fails, it will fall back to english. Otherwise it will
2015 ## use english the first time.
2016 ##
2017 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
2018 ##
2019 #lastfm_preferred_language = en
2020 #
2021 #show_hidden_files_in_local_browser = no
2022 #
2023 ##
2024 ## How shall screen switcher work?
2025 ##
2026 ## - "previous" - switch between the current and previous screen.
2027 ## - "screen1,...,screenN" - switch between given sequence of screens.
2028 ##
2029 ## Screens available for use: help, playlist, browser, search_engine,
2030 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
2031 ##
2032 #screen_switcher_mode = playlist, browser
2033 #
2034 ##
2035 ## Note: You can define startup screen
2036 ## by choosing screen from the list above.
2037 ##
2038 #startup_screen = playlist
2039 #
2040 ##
2041 ## Note: You can define startup slave screen
2042 ## by choosing screen from the list above or
2043 ## an empty value for no slave screen.
2044 ##
2045 #startup_slave_screen = ""
2046 #
2047 #startup_slave_screen_focus = no
2048 #
2049 ##
2050 ## Default width of locked screen (in %).
2051 ## Acceptable values are from 20 to 80.
2052 ##
2053 #
2054 #locked_screen_width_part = 50
2055 #
2056 #ask_for_locked_screen_width_part = yes
2057 #
2058 #jump_to_now_playing_song_at_start = yes
2059 #
2060 #ask_before_clearing_playlists = yes
2061 #
2062 #clock_display_seconds = no
2063 #
2064 #display_volume_level = yes
2065 #
2066 #display_bitrate = no
2067 #
2068 #display_remaining_time = no
2069 #
2070 ## Available values: none, basic, extended, perl.
2071 ##
2072 #regular_expressions = perl
2073 #
2074 ##
2075 ## Note: If below is enabled, ncmpcpp will ignore leading
2076 ## "The" word while sorting items in browser, tags in
2077 ## media library, etc.
2078 ##
2079 #ignore_leading_the = no
2080 #
2081 #block_search_constraints_change_if_items_found = yes
2082 #
2083 #mouse_support = yes
2084 #
2085 #mouse_list_scroll_whole_page = yes
2086 #
2087 #empty_tag_marker = <empty>
2088 #
2089 #tags_separator = " | "
2090 #
2091 #tag_editor_extended_numeration = no
2092 #
2093 #media_library_sort_by_mtime = no
2094 #
2095 #enable_window_title = yes
2096 #
2097 ##
2098 ## Note: You can choose default search mode for search
2099 ## engine. Available modes are:
2100 ##
2101 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2102 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2103 ## but if your mpd is on a remote machine, downloading big database
2104 ## to process it can take a while
2105 ## - 3 - match only exact values (this mode uses mpd function for searching
2106 ## in database and local one for searching in current playlist)
2107 ##
2108 #
2109 #search_engine_default_search_mode = 1
2110 #
2111 #external_editor = nano
2112 #
2113 ## Note: set to yes if external editor is a console application.
2114 ##
2115 #use_console_editor = yes
2116 #
2117 ##### colors definitions #####
2118 ##
2119 ## It is possible to set a background color by setting a color
2120 ## value "<foreground>_<background>", e.g. red_black will set
2121 ## foregound color to red and background color to black.
2122 ##
2123 ## In addition, for terminals that support 256 colors it
2124 ## is possible to set one of them by using a number in range
2125 ## [1, 256] instead of color name, e.g. numerical value
2126 ## corresponding to red_black is 2_1. To find out if the
2127 ## terminal supports 256 colors, run ncmpcpp and check out
2128 ## the bottom of the help screen for list of available colors
2129 ## and their numerical values.
2130 ##
2131 ## Note: due to technical limitations of ncurses, if 256 colors
2132 ## are used, it is possible to either use only the colors with
2133 ## default background color, or all pairs from 1_1 up to 254_127,
2134 ## depending on the ncurses version used.
2135 ##
2136 #
2137 #colors_enabled = yes
2138 #
2139 #empty_tag_color = cyan
2140 #
2141 #header_window_color = default
2142 #
2143 #volume_color = default
2144 #
2145 #state_line_color = default
2146 #
2147 #state_flags_color = default
2148 #
2149 #main_window_color = yellow
2150 #
2151 #color1 = white
2152 #
2153 #color2 = green
2154 #
2155 #main_window_highlight_color = yellow
2156 #
2157 #progressbar_color = black
2158 #
2159 #progressbar_elapsed_color = green
2160 #
2161 #statusbar_color = default
2162 #
2163 #alternative_ui_separator_color = black
2164 #
2165 #active_column_color = red
2166 #
2167 #window_border_color = green
2168 #
2169 #active_window_border = red
2170 #
2171 #+end_src
2172
2173 *** bindings
2174 :PROPERTIES:
2175 :header-args+: :tangle ~/.ncmpcpp/bindings
2176 :END:
2177
2178 #+begin_src conf :tangle no
2179 def_key "j"
2180 scroll_down
2181 def_key "k"
2182 scroll_up
2183
2184 def_key "ctrl-u"
2185 page_up
2186 def_key "ctrl-d"
2187 page_down
2188
2189 def_key "h"
2190 previous_column
2191 def_key "l"
2192 next_column
2193
2194 def_key "."
2195 show_lyrics
2196
2197 def_key "n"
2198 next_found_item
2199 def_key "N"
2200 previous_found_item
2201
2202 def_key "J"
2203 move_sort_order_down
2204 def_key "K"
2205 move_sort_order_up
2206 #+end_src
2207
2208 ** notmuch
2209
2210 *** notmuch-config
2211 :PROPERTIES:
2212 :header-args+: :tangle ~/.notmuch-config
2213 :END:
2214
2215 #+begin_src conf
2216 # .notmuch-config - Configuration file for the notmuch mail system
2217 #
2218 # For more information about notmuch, see https://notmuchmail.org
2219
2220 # Database configuration
2221 #
2222 # The only value supported here is 'path' which should be the top-level
2223 # directory where your mail currently exists and to where mail will be
2224 # delivered in the future. Files should be individual email messages.
2225 # Notmuch will store its database within a sub-directory of the path
2226 # configured here named ".notmuch".
2227 #
2228 [database]
2229 path=/home/amin/oldmail
2230
2231 # User configuration
2232 #
2233 # Here is where you can let notmuch know how you would like to be
2234 # addressed. Valid settings are
2235 #
2236 # name Your full name.
2237 # primary_email Your primary email address.
2238 # other_email A list (separated by ';') of other email addresses
2239 # at which you receive email.
2240 #
2241 # Notmuch will use the various email addresses configured here when
2242 # formatting replies. It will avoid including your own addresses in the
2243 # recipient list of replies, and will set the From address based on the
2244 # address to which the original email was addressed.
2245 #
2246 [user]
2247 name=Amin Bandali
2248 primary_email=amin@aminb.org
2249 other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2250
2251 # Configuration for "notmuch new"
2252 #
2253 # The following options are supported here:
2254 #
2255 # tags A list (separated by ';') of the tags that will be
2256 # added to all messages incorporated by "notmuch new".
2257 #
2258 # ignore A list (separated by ';') of file and directory names
2259 # that will not be searched for messages by "notmuch new".
2260 #
2261 # NOTE: *Every* file/directory that goes by one of those
2262 # names will be ignored, independent of its depth/location
2263 # in the mail store.
2264 #
2265 [new]
2266 tags=new;
2267 #tags=unread;inbox;
2268 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2269
2270 # Search configuration
2271 #
2272 # The following option is supported here:
2273 #
2274 # exclude_tags
2275 # A ;-separated list of tags that will be excluded from
2276 # search results by default. Using an excluded tag in a
2277 # query will override that exclusion.
2278 #
2279 [search]
2280 exclude_tags=deleted;spam;
2281
2282 # Maildir compatibility configuration
2283 #
2284 # The following option is supported here:
2285 #
2286 # synchronize_flags Valid values are true and false.
2287 #
2288 # If true, then the following maildir flags (in message filenames)
2289 # will be synchronized with the corresponding notmuch tags:
2290 #
2291 # Flag Tag
2292 # ---- -------
2293 # D draft
2294 # F flagged
2295 # P passed
2296 # R replied
2297 # S unread (added when 'S' flag is not present)
2298 #
2299 # The "notmuch new" command will notice flag changes in filenames
2300 # and update tags, while the "notmuch tag" and "notmuch restore"
2301 # commands will notice tag changes and update flags in filenames
2302 #
2303 [maildir]
2304 synchronize_flags=true
2305
2306 # Cryptography related configuration
2307 #
2308 # The following option is supported here:
2309 #
2310 # gpg_path
2311 # binary name or full path to invoke gpg.
2312 #
2313 [crypto]
2314 gpg_path=gpg
2315 #+end_src
2316
2317 *** pre-new hook
2318 :PROPERTIES:
2319 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2320 :END:
2321
2322 #+begin_src sh
2323 touch /tmp/gnusieve.log
2324 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2325 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2326 #+end_src
2327
2328 *** post-new hook
2329 :PROPERTIES:
2330 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2331 :END:
2332
2333 #+begin_src sh
2334 # apply sent tag to messages sent by me
2335 notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2336
2337 # initial tagging
2338 notmuch tag -latest -- tag:latest
2339 notmuch tag +inbox +unread +latest -new -- tag:new
2340
2341
2342 # apply tags to lists
2343
2344 # <aminb>
2345 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2346 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2347
2348 notmuch tag -inbox +pay -- folder:amin/pay
2349 notmuch tag -inbox +banking -- folder:amin/banking
2350 notmuch tag -inbox +work -- folder:amin/work
2351 # </aminb>
2352
2353 # <uw>
2354 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2355 notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2356 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2357 notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2358 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2359
2360 notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
2361 notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2362 notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2363 notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2364 notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2365 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2366 # </uw>
2367
2368 # <gnu>
2369 notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2370 notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2371 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2372 notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2373 notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2374 notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2375 notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2376 notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2377 notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2378 notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2379 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2380
2381 notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2382 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2383 notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2384 notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2385
2386 notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2387 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2388 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2389 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2390 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2391 # </gnu>
2392
2393 notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2394 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2395 #+end_src
2396
2397 *** notmuch.service
2398 :PROPERTIES:
2399 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2400 :END:
2401
2402 #+begin_src conf :tangle no
2403 [Unit]
2404 Description=notmuch service
2405
2406 [Service]
2407 Type=oneshot
2408 ExecStart=/usr/bin/notmuch new
2409 StandardOutput=syslog
2410 StandardError=syslog
2411 #+end_src
2412
2413 *** notmuch.timer
2414 :PROPERTIES:
2415 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2416 :END:
2417
2418 #+begin_src conf :tangle no
2419 [Unit]
2420 Description=notmuch timer
2421
2422 [Timer]
2423 OnCalendar=*:0/5
2424 Persistent=true
2425 Unit=notmuch.service
2426
2427 [Install]
2428 WantedBy=timers.target
2429 #+end_src
2430
2431 ** offlineimap
2432
2433 *** offlineimaprc
2434 :PROPERTIES:
2435 :header-args+: :tangle ~/.offlineimaprc
2436 :END:
2437
2438 #+begin_src conf :tangle no
2439 [general]
2440 pythonfile = ~/.offlineimap.py
2441 accounts = Gmail, aminb
2442 maxsyncaccounts = 3
2443
2444 [Account Gmail]
2445 localrepository = GmailL
2446 remoterepository = GmailR
2447
2448 [Account aminb]
2449 localrepository = aminbL
2450 remoterepository = aminbR
2451
2452 [Repository GmailL]
2453 type = Maildir
2454 localfolders = ~/Maildir/Gmail
2455
2456 [Repository GmailR]
2457 type = IMAP
2458 remotehost = imap.gmail.com
2459 remoteusereval = mailuser("gmail")
2460 remotepasseval = mailpasswd("gmail")
2461 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2462 ssl = yes
2463 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2464 maxconnections = 1
2465 realdelete = no
2466
2467 [Repository aminbL]
2468 type = Maildir
2469 localfolders = ~/Maildir/aminb
2470
2471 [Repository aminbR]
2472 type = IMAP
2473 remotehost = mail.aminb.org
2474 remoteusereval = mailuser("aminb")
2475 remotepasseval = mailpasswd("aminb")
2476 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2477 ssl = yes
2478 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2479 maxconnections = 1
2480 realdelete = no
2481 #+end_src
2482
2483 *** offlineimap.py
2484 :PROPERTIES:
2485 :header-args+: :tangle ~/.offlineimap.py
2486 :END:
2487
2488 #+begin_src python :tangle no
2489 import os
2490 import subprocess
2491
2492 def mailpasswd(acct):
2493 acct = os.path.basename(acct)
2494 path = "/home/amin/.passwd/%s.gpg" % acct
2495 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2496 try:
2497 return subprocess.check_output(args).strip()
2498 except subprocess.CalledProcessError:
2499 return ""
2500
2501 def mailuser(acct):
2502 acct = os.path.basename(acct)
2503 path = "/home/amin/.passwd/%s" % acct
2504 args = ["cat", path]
2505 try:
2506 return subprocess.check_output(args).strip()
2507 except subprocess.CalledProcessError:
2508 return ""
2509
2510 def prime_gpg_agent():
2511 ret = False
2512 i = 1
2513 while not ret:
2514 ret = (mailpasswd("prime") == "prime")
2515 if i > 2:
2516 from offlineimap.ui import getglobalui
2517 sys.stderr.write("Error reading in passwords. Terminating.\n")
2518 getglobalui().terminate()
2519 i += 1
2520 return ret
2521
2522 prime_gpg_agent()
2523 #+end_src
2524
2525 ** pigeonhole
2526 *** gnu.sieve
2527 :PROPERTIES:
2528 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2529 :END:
2530
2531 #+begin_src conf
2532 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2533
2534 if anyof (
2535 address :is "from" "webmasters@gnu.org",
2536 address :is "from" "webmasters-comment@gnu.org") {
2537 fileinto :create "webmasters";
2538 stop;
2539 }
2540
2541 include :personal "lists";
2542 #+end_src
2543
2544 *** lists.sieve
2545 :PROPERTIES:
2546 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2547 :END:
2548
2549 #+begin_src conf
2550 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2551 "include" ];
2552
2553 if anyof (
2554 header :contains "list-id" "<emacs-devel.gnu.org>",
2555 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2556 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2557 header :contains "list-id" "<fencepost-users.gnu.org>",
2558 header :contains "list-id" "<guix-devel.gnu.org>",
2559 header :contains "list-id" "<guile-devel.gnu.org>",
2560 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2561 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2562 header :contains "list-id" "<www-commits.gnu.org>",
2563 header :contains "list-id" "<www-discuss.gnu.org>",
2564 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2565 header :contains "list-id" "<haskell-cafe.haskell.org>",
2566 header :contains "list-id" "<haskell-art.we.lurk.org>",
2567 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2568 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2569 set :lower "listname" "${1}";
2570 fileinto :create "l/${listname}";
2571 }
2572 }
2573
2574 if anyof (
2575 header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2576 header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2577 header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2578 header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2579 header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2580 if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2581 set :lower "username" "${1}";
2582 set :lower "listname" "${2}";
2583 fileinto :create "l/${username}/${listname}";
2584 }
2585 }
2586 #+end_src
2587
2588 ** polybar
2589
2590 *** config
2591 :PROPERTIES:
2592 :header-args+: :tangle ~/.config/polybar/config
2593 :END:
2594
2595 #+begin_src conf :tangle no
2596 ;=====================================================
2597 ;
2598 ; To learn more about how to configure Polybar
2599 ; go to https://github.com/jaagr/polybar
2600 ;
2601 ; The README contains alot of information
2602 ;
2603 ;=====================================================
2604
2605 [colors]
2606 ;background = ${xrdb:color0:#222}
2607 background = #222
2608 background-alt = #444
2609 ;foreground = ${xrdb:color7:#222}
2610 foreground = #eee
2611 foreground-alt = #888
2612 primary = #ffb52a
2613 secondary = #e60053
2614 alert = #bd2c40
2615
2616 [bar/main]
2617 ;monitor = ${env:MONITOR:HDMI-1}
2618 width = 100%
2619 height = 27
2620 ;offset-x = 1%
2621 ;offset-y = 1%
2622 radius = 3.0
2623 fixed-center = true
2624
2625 background = ${colors.background}
2626 foreground = ${colors.foreground}
2627
2628 line-size = 3
2629 line-color = #f00
2630
2631 border-size = 4
2632 border-color = #00000000
2633
2634 padding-left = 0
2635 padding-right = 2
2636
2637 module-margin-left = 2
2638 module-margin-right = 2
2639
2640 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2641 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2642 font-2 = Wuncon Siji:pixelsize=10;1
2643 font-3 = FontAwesome:pixelsize=10;1
2644
2645 modules-left = bspwm xwindow
2646 modules-center =
2647 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2648
2649 tray-position = right
2650 tray-padding = 1
2651 ;tray-transparent = true
2652 ;tray-background = #0063ff
2653 tray-maxsize = 18
2654
2655 wm-restack = bspwm
2656
2657 ;override-redirect = true
2658
2659 scroll-up = bspwm-desknext
2660 scroll-down = bspwm-deskprev
2661
2662 [module/xwindow]
2663 type = internal/xwindow
2664 label = %title:0:50:...%
2665
2666 [module/xkeyboard]
2667 type = internal/xkeyboard
2668 blacklist-0 = num lock
2669
2670 format-prefix = " "
2671 format-prefix-foreground = ${colors.foreground-alt}
2672 format-prefix-underline = ${colors.secondary}
2673
2674 label-layout = %layout%
2675 label-layout-underline = ${colors.secondary}
2676
2677 label-indicator-padding = 2
2678 label-indicator-margin = 1
2679 label-indicator-background = ${colors.secondary}
2680 label-indicator-underline = ${colors.secondary}
2681
2682 [module/filesystem]
2683 type = internal/fs
2684 interval = 25
2685
2686 mount-0 = /
2687
2688 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2689 label-unmounted = %mountpoint% not mounted
2690 label-unmounted-foreground = ${colors.foreground-alt}
2691
2692 [module/bspwm]
2693 type = internal/bspwm
2694
2695 label-focused = %index%
2696 label-focused-background = ${colors.background-alt}
2697 label-focused-underline= ${colors.primary}
2698 label-focused-padding = 2
2699
2700 label-occupied = %index%
2701 label-occupied-padding = 2
2702
2703 label-urgent = %index%!
2704 label-urgent-background = ${colors.alert}
2705 label-urgent-padding = 2
2706
2707 label-empty = %index%
2708 label-empty-foreground = ${colors.foreground-alt}
2709 label-empty-padding = 2
2710
2711 [module/i3]
2712 type = internal/i3
2713 format = <label-state> <label-mode>
2714 index-sort = true
2715 wrapping-scroll = false
2716
2717 ; Only show workspaces on the same output as the bar
2718 ;pin-workspaces = true
2719
2720 label-mode-padding = 2
2721 label-mode-foreground = #000
2722 label-mode-background = ${colors.primary}
2723
2724 ; focused = Active workspace on focused monitor
2725 label-focused = %index%
2726 label-focused-background = ${module/bspwm.label-focused-background}
2727 label-focused-underline = ${module/bspwm.label-focused-underline}
2728 label-focused-padding = ${module/bspwm.label-focused-padding}
2729
2730 ; unfocused = Inactive workspace on any monitor
2731 label-unfocused = %index%
2732 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2733
2734 ; visible = Active workspace on unfocused monitor
2735 label-visible = %index%
2736 label-visible-background = ${self.label-focused-background}
2737 label-visible-underline = ${self.label-focused-underline}
2738 label-visible-padding = ${self.label-focused-padding}
2739
2740 ; urgent = Workspace with urgency hint set
2741 label-urgent = %index%
2742 label-urgent-background = ${module/bspwm.label-urgent-background}
2743 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2744
2745 [module/mpd]
2746 type = internal/mpd
2747 format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2748
2749 icon-prev = 
2750 icon-stop = 
2751 icon-play = 
2752 icon-pause = 
2753 icon-next = 
2754
2755 label-song-maxlen = 25
2756 label-song-ellipsis = true
2757
2758 [module/xbacklight]
2759 type = internal/xbacklight
2760
2761 format = <label> <bar>
2762 label = BL
2763
2764 bar-width = 10
2765 bar-indicator = |
2766 bar-indicator-foreground = #ff
2767 bar-indicator-font = 2
2768 bar-fill = ─
2769 bar-fill-font = 2
2770 bar-fill-foreground = #9f78e1
2771 bar-empty = ─
2772 bar-empty-font = 2
2773 bar-empty-foreground = ${colors.foreground-alt}
2774
2775 [module/backlight-acpi]
2776 inherit = module/xbacklight
2777 type = internal/backlight
2778 ;card = intel_backlight
2779 card = mba6x_backlight
2780
2781 [module/cpu]
2782 type = internal/cpu
2783 interval = 2
2784 format-prefix = " "
2785 format-prefix-foreground = ${colors.foreground-alt}
2786 format-underline = #f90000
2787 label = %percentage%%
2788
2789 [module/memory]
2790 type = internal/memory
2791 interval = 2
2792 format-prefix = " "
2793 format-prefix-foreground = ${colors.foreground-alt}
2794 format-underline = #4bffdc
2795 label = %percentage_used%%
2796
2797 [module/wlan]
2798 type = internal/network
2799 interface =
2800 interval = 3.0
2801
2802 format-connected = <ramp-signal> <label-connected>
2803 format-connected-underline = #9f78e1
2804 label-connected = %essid%
2805
2806 format-disconnected =
2807 ;format-disconnected = <label-disconnected>
2808 ;format-disconnected-underline = ${self.format-connected-underline}
2809 ;label-disconnected = %ifname% disconnected
2810 ;label-disconnected-foreground = ${colors.foreground-alt}
2811
2812 ramp-signal-0 = 
2813 ramp-signal-1 = 
2814 ramp-signal-2 = 
2815 ramp-signal-3 = 
2816 ramp-signal-4 = 
2817 ramp-signal-foreground = ${colors.foreground-alt}
2818
2819 [module/eth]
2820 type = internal/network
2821 interface =
2822 interval = 3.0
2823
2824 format-connected-underline = #55aa55
2825 format-connected-prefix = " "
2826 format-connected-prefix-foreground = ${colors.foreground-alt}
2827 label-connected = %local_ip%
2828
2829 format-disconnected =
2830 ;format-disconnected = <label-disconnected>
2831 ;format-disconnected-underline = ${self.format-connected-underline}
2832 ;label-disconnected = %ifname% disconnected
2833 ;label-disconnected-foreground = ${colors.foreground-alt}
2834
2835 [module/date]
2836 type = internal/date
2837 interval = 5
2838
2839 date =
2840 date-alt = " %Y-%m-%d"
2841
2842 time = %H:%M
2843 time-alt = %H:%M:%S
2844
2845 format-prefix = 
2846 format-prefix-foreground = ${colors.foreground-alt}
2847 format-underline = #0a6cf5
2848
2849 label = %date% %time%
2850
2851 [module/volume]
2852 type = internal/volume
2853
2854 format-volume = <label-volume> <bar-volume>
2855 label-volume = vol
2856 label-volume-foreground = ${root.foreground}
2857
2858 format-muted-prefix = " "
2859 format-muted-foreground = ${colors.foreground-alt}
2860 label-muted = mute
2861
2862 bar-volume-width = 10
2863 bar-volume-foreground-0 = #55aa55
2864 bar-volume-foreground-1 = #55aa55
2865 bar-volume-foreground-2 = #55aa55
2866 bar-volume-foreground-3 = #55aa55
2867 bar-volume-foreground-4 = #55aa55
2868 bar-volume-foreground-5 = #f5a70a
2869 bar-volume-foreground-6 = #ff5555
2870 bar-volume-gradient = false
2871 bar-volume-indicator = |
2872 bar-volume-indicator-font = 2
2873 bar-volume-fill = ─
2874 bar-volume-fill-font = 2
2875 bar-volume-empty = ─
2876 bar-volume-empty-font = 2
2877 bar-volume-empty-foreground = ${colors.foreground-alt}
2878
2879 [module/battery]
2880 type = internal/battery
2881 battery = BAT0
2882 adapter = ADP1
2883 full-at = 64
2884
2885 format-charging = <animation-charging> <label-charging>
2886 format-charging-underline = #ffb52a
2887
2888 format-discharging = <ramp-capacity> <label-discharging>
2889 format-discharging-underline = ${self.format-charging-underline}
2890
2891 format-full-prefix = " "
2892 format-full-prefix-foreground = ${colors.foreground-alt}
2893 format-full-underline = ${self.format-charging-underline}
2894
2895 ramp-capacity-0 = 
2896 ramp-capacity-1 = 
2897 ramp-capacity-2 = 
2898 ramp-capacity-foreground = ${colors.foreground-alt}
2899
2900 animation-charging-0 = 
2901 animation-charging-1 = 
2902 animation-charging-2 = 
2903 animation-charging-foreground = ${colors.foreground-alt}
2904 animation-charging-framerate = 750
2905
2906 [module/temperature]
2907 type = internal/temperature
2908 thermal-zone = 1
2909 warn-temperature = 66
2910
2911 format = <ramp> <label>
2912 format-underline = #f50a4d
2913 format-warn = <ramp> <label-warn>
2914 format-warn-underline = ${self.format-underline}
2915
2916 label = %temperature%
2917 label-warn = %temperature%
2918 label-warn-foreground = ${colors.secondary}
2919
2920 ramp-0 = 
2921 ramp-1 = 
2922 ramp-2 = 
2923 ramp-foreground = ${colors.foreground-alt}
2924
2925 [module/powermenu]
2926 type = custom/menu
2927
2928 format-spacing = 1
2929
2930 label-open = 
2931 label-open-foreground = ${colors.secondary}
2932 label-close =  cancel
2933 label-close-foreground = ${colors.secondary}
2934 label-separator = |
2935 label-separator-foreground = ${colors.foreground-alt}
2936
2937 menu-0-0 = reboot
2938 menu-0-0-exec = menu-open-1
2939 menu-0-1 = power off
2940 menu-0-1-exec = menu-open-2
2941
2942 menu-1-0 = cancel
2943 menu-1-0-exec = menu-open-0
2944 menu-1-1 = reboot
2945 menu-1-1-exec = sudo reboot
2946
2947 menu-2-0 = power off
2948 menu-2-0-exec = sudo poweroff
2949 menu-2-1 = cancel
2950 menu-2-1-exec = menu-open-0
2951
2952 [module/mail]
2953 type = custom/script
2954 interval = 60
2955 format = <label>
2956 format-prefix = " "
2957 format-prefix-foreground = ${colors.foreground-alt}
2958 format-underline = #0a6cf5
2959 exec = notmuch count tag:unread
2960
2961 [settings]
2962 screenchange-reload = true
2963 ;compositing-background = xor
2964 ;compositing-background = screen
2965 ;compositing-foreground = source
2966 ;compositing-border = over
2967
2968 [global/wm]
2969 margin-top = 0
2970 margin-bottom = 0
2971
2972 ; vim:ft=dosini
2973 #+end_src
2974
2975 *** polybar-launch
2976 :PROPERTIES:
2977 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2978 :END:
2979
2980 #+begin_src sh :tangle no
2981 # Terminate already running bar instances
2982 killall -q polybar
2983
2984 # Wait until the processes have been shut down
2985 while pgrep -x polybar >/dev/null; do sleep 1; done
2986
2987 # Launch main bar
2988 polybar main &
2989
2990 echo "Bars launched..."
2991 #+end_src
2992
2993 ** PowerTOP
2994 :PROPERTIES:
2995 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2996 :END:
2997
2998 #+begin_src conf
2999 [Unit]
3000 Description=Powertop tunings
3001
3002 [Service]
3003 ExecStart=/usr/bin/powertop --auto-tune
3004 RemainAfterExit=true
3005
3006 [Install]
3007 WantedBy=multi-user.target
3008 #+end_src
3009
3010 ** ranger
3011
3012 *** rc.conf
3013 :PROPERTIES:
3014 :header-args+: :tangle ~/.config/ranger/rc.conf
3015 :END:
3016
3017 #+begin_src conf :tangle no
3018 # ===================================================================
3019 # This file contains the default startup commands for ranger.
3020 # To change them, it is recommended to create the file
3021 # ~/.config/ranger/rc.conf and add your custom commands there.
3022 #
3023 # If you copy this whole file there, you may want to set the environment
3024 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
3025 #
3026 # The purpose of this file is mainly to define keybindings and settings.
3027 # For running more complex python code, please create a plugin in "plugins/" or
3028 # a command in "commands.py".
3029 #
3030 # Each line is a command that will be run before the user interface
3031 # is initialized. As a result, you can not use commands which rely
3032 # on the UI such as :delete or :mark.
3033 # ===================================================================
3034
3035 # ===================================================================
3036 # == Options
3037 # ===================================================================
3038
3039 # How many columns are there, and what are their relative widths?
3040 set column_ratios 1,3,4
3041
3042 # Which files should be hidden? (regular expression)
3043 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
3044
3045 # Show hidden files? You can toggle this by typing 'zh'
3046 set show_hidden false
3047
3048 # Ask for a confirmation when running the "delete" command?
3049 # Valid values are "always" (default), "never", "multiple"
3050 # With "multiple", ranger will ask only if you delete multiple files at once.
3051 set confirm_on_delete multiple
3052
3053 # Which script is used to generate file previews?
3054 # ranger ships with scope.sh, a script that calls external programs (see
3055 # README for dependencies) to preview images, archives, etc.
3056 set preview_script ~/.config/ranger/scope.sh
3057
3058 # Use the external preview script or display simple plain text previews?
3059 set use_preview_script true
3060
3061 # Open all images in this directory when running certain image viewers
3062 # like feh or sxiv? You can still open selected files by marking them.
3063 set open_all_images true
3064
3065 # Be aware of version control systems and display information.
3066 set vcs_aware false
3067
3068 # State of the three backends git, hg, bzr. The possible states are
3069 # disabled, local (only show local info), enabled (show local and remote
3070 # information).
3071 set vcs_backend_git enabled
3072 set vcs_backend_hg disabled
3073 set vcs_backend_bzr disabled
3074
3075 # Preview images in full color with the external command "w3mimgpreview"?
3076 # This requires the console web browser "w3m" and a supported terminal.
3077 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3078 set preview_images true
3079
3080 # Use a unicode "..." character to mark cut-off filenames?
3081 set unicode_ellipsis false
3082
3083 # Show dotfiles in the bookmark preview box?
3084 set show_hidden_bookmarks true
3085
3086 # Which colorscheme to use? These colorschemes are available by default:
3087 # default, jungle, snow
3088 set colorscheme default
3089
3090 # Preview files on the rightmost column?
3091 # And collapse (shrink) the last column if there is nothing to preview?
3092 set preview_files true
3093 set preview_directories true
3094 set collapse_preview true
3095
3096 # Save the console history on exit?
3097 set save_console_history true
3098
3099 # Draw the status bar on top of the browser window (default: bottom)
3100 set status_bar_on_top false
3101
3102 # Draw a progress bar in the status bar which displays the average state of all
3103 # currently running tasks which support progress bars?
3104 set draw_progress_bar_in_status_bar true
3105
3106 # Draw borders around columns?
3107 set draw_borders true
3108
3109 # Display the directory name in tabs?
3110 set dirname_in_tabs false
3111
3112 # Enable the mouse support?
3113 set mouse_enabled true
3114
3115 # Display the file size in the main column or status bar?
3116 set display_size_in_main_column true
3117 set display_size_in_status_bar true
3118
3119 # Display files tags in all columns or only in main column?
3120 set display_tags_in_all_columns true
3121
3122 # Set a title for the window?
3123 set update_title false
3124
3125 # Set the title to "ranger" in the tmux program?
3126 set update_tmux_title false
3127
3128 # Shorten the title if it gets long? The number defines how many
3129 # directories are displayed at once, 0 turns off this feature.
3130 set shorten_title 3
3131
3132 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3133 set tilde_in_titlebar false
3134
3135 # How many directory-changes or console-commands should be kept in history?
3136 set max_history_size 20
3137 set max_console_history_size 50
3138
3139 # Try to keep so much space between the top/bottom border when scrolling:
3140 set scroll_offset 8
3141
3142 # Flush the input after each key hit? (Noticable when ranger lags)
3143 set flushinput true
3144
3145 # Padding on the right when there's no preview?
3146 # This allows you to click into the space to run the file.
3147 set padding_right true
3148
3149 # Save bookmarks (used with mX and `X) instantly?
3150 # This helps to synchronize bookmarks between multiple ranger
3151 # instances but leads to *slight* performance loss.
3152 # When false, bookmarks are saved when ranger is exited.
3153 set autosave_bookmarks true
3154
3155 # You can display the "real" cumulative size of directories by using the
3156 # command :get_cumulative_size or typing "dc". The size is expensive to
3157 # calculate and will not be updated automatically. You can choose
3158 # to update it automatically though by turning on this option:
3159 set autoupdate_cumulative_size false
3160
3161 # Turning this on makes sense for screen readers:
3162 set show_cursor false
3163
3164 # One of: size, basename, mtime, type
3165 set sort natural
3166
3167 # Additional sorting options
3168 set sort_reverse false
3169 set sort_case_insensitive true
3170 set sort_directories_first true
3171
3172 # Enable this if key combinations with the Alt Key don't work for you.
3173 # (Especially on xterm)
3174 set xterm_alt_key false
3175
3176 # ===================================================================
3177 # == Local Options
3178 # ===================================================================
3179 # You can set local options that only affect a single directory.
3180
3181 # Examples:
3182 # setlocal path=~/downloads sort mtime
3183
3184 # ===================================================================
3185 # == Command Aliases in the Console
3186 # ===================================================================
3187
3188 alias e edit
3189 alias q quit
3190 alias q! quitall
3191 alias qall quitall
3192 alias setl setlocal
3193
3194 alias filter scout -prt
3195 alias find scout -aet
3196 alias mark scout -mr
3197 alias unmark scout -Mr
3198 alias search scout -rs
3199 alias search_inc scout -rts
3200 alias travel scout -aefiklst
3201
3202 # ===================================================================
3203 # == Define keys for the browser
3204 # ===================================================================
3205
3206 # Basic
3207 map Q quit!
3208 map q quit
3209 copymap q ZZ ZQ
3210
3211 map R reload_cwd
3212 map <C-r> reset
3213 map <C-l> redraw_window
3214 map <C-c> abort
3215 map <esc> change_mode normal
3216
3217 map i display_file
3218 map ? help
3219 map W display_log
3220 map w taskview_open
3221 map S shell $SHELL
3222
3223 map : console
3224 map ; console
3225 map ! console shell
3226 map @ console -p6 shell %%s
3227 map # console shell -p
3228 map s console shell
3229 map r chain draw_possible_programs; console open_with
3230 map f console find
3231 map cd console cd
3232
3233 # Tagging / Marking
3234 map t tag_toggle
3235 map ut tag_remove
3236 map "<any> tag_toggle tag=%any
3237 map <Space> mark_files toggle=True
3238 map v mark_files all=True toggle=True
3239 map uv mark_files all=True val=False
3240 map V toggle_visual_mode
3241 map uV toggle_visual_mode reverse=True
3242
3243 # For the nostalgics: Midnight Commander bindings
3244 map <F1> help
3245 map <F3> display_file
3246 map <F4> edit
3247 map <F5> copy
3248 map <F6> cut
3249 map <F7> console mkdir
3250 map <F8> console delete
3251 map <F10> exit
3252
3253 # In case you work on a keyboard with dvorak layout
3254 map <UP> move up=1
3255 map <DOWN> move down=1
3256 map <LEFT> move left=1
3257 map <RIGHT> move right=1
3258 map <HOME> move to=0
3259 map <END> move to=-1
3260 map <PAGEDOWN> move down=1 pages=True
3261 map <PAGEUP> move up=1 pages=True
3262 map <CR> move right=1
3263 map <DELETE> console delete
3264 map <INSERT> console touch
3265
3266 # VIM-like
3267 copymap <UP> k
3268 copymap <DOWN> j
3269 copymap <LEFT> h
3270 copymap <RIGHT> l
3271 copymap <HOME> gg
3272 copymap <END> G
3273 copymap <PAGEDOWN> <C-F>
3274 copymap <PAGEUP> <C-B>
3275
3276 map J move down=0.5 pages=True
3277 map K move up=0.5 pages=True
3278 copymap J <C-D>
3279 copymap K <C-U>
3280
3281 # Jumping around
3282 map H history_go -1
3283 map L history_go 1
3284 map ] move_parent 1
3285 map [ move_parent -1
3286 map } traverse
3287
3288 map gh cd ~
3289 map ge cd /etc
3290 map gu cd /usr
3291 map gd cd /dev
3292 map gl cd -r .
3293 map gL cd -r %f
3294 map go cd /opt
3295 map gv cd /var
3296 map gm cd /media
3297 map gM cd /mnt
3298 map gs cd /srv
3299 map gr cd /
3300 map gR eval fm.cd(ranger.RANGERDIR)
3301 map g/ cd /
3302 map g? cd /usr/share/doc/ranger
3303
3304 # External Programs
3305 map E edit
3306 map du shell -p du --max-depth=1 -h --apparent-size
3307 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3308 map yp shell -d echo -n %d/%f | xsel -i
3309 map yd shell -d echo -n %d | xsel -i
3310 map yn shell -d echo -n %f | xsel -i
3311
3312 # Filesystem Operations
3313 map = chmod
3314
3315 map cw console rename
3316 map A eval fm.open_console('rename ' + fm.thisfile.basename)
3317 map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3318
3319 map pp paste
3320 map po paste overwrite=True
3321 map pl paste_symlink relative=False
3322 map pL paste_symlink relative=True
3323 map phl paste_hardlink
3324 map pht paste_hardlinked_subtree
3325
3326 map dd cut
3327 map ud uncut
3328 map da cut mode=add
3329 map dr cut mode=remove
3330
3331 map yy copy
3332 map uy uncut
3333 map ya copy mode=add
3334 map yr copy mode=remove
3335
3336 # Temporary workarounds
3337 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3338 map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3339 map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3340 map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3341 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3342 map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3343 map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3344 map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3345
3346 # Searching
3347 map / console search
3348 map n search_next
3349 map N search_next forward=False
3350 map ct search_next order=tag
3351 map cs search_next order=size
3352 map ci search_next order=mimetype
3353 map cc search_next order=ctime
3354 map cm search_next order=mtime
3355 map ca search_next order=atime
3356
3357 # Tabs
3358 map <C-n> tab_new ~
3359 map <C-w> tab_close
3360 map <TAB> tab_move 1
3361 map <S-TAB> tab_move -1
3362 map <A-Right> tab_move 1
3363 map <A-Left> tab_move -1
3364 map gt tab_move 1
3365 map gT tab_move -1
3366 map gn tab_new ~
3367 map gc tab_close
3368 map uq tab_restore
3369 map <a-1> tab_open 1
3370 map <a-2> tab_open 2
3371 map <a-3> tab_open 3
3372 map <a-4> tab_open 4
3373 map <a-5> tab_open 5
3374 map <a-6> tab_open 6
3375 map <a-7> tab_open 7
3376 map <a-8> tab_open 8
3377 map <a-9> tab_open 9
3378
3379 # Sorting
3380 map or toggle_option sort_reverse
3381 map os chain set sort=size; set sort_reverse=False
3382 map ob chain set sort=basename; set sort_reverse=False
3383 map on chain set sort=natural; set sort_reverse=False
3384 map om chain set sort=mtime; set sort_reverse=False
3385 map oc chain set sort=ctime; set sort_reverse=False
3386 map oa chain set sort=atime; set sort_reverse=False
3387 map ot chain set sort=type; set sort_reverse=False
3388
3389 map oS chain set sort=size; set sort_reverse=True
3390 map oB chain set sort=basename; set sort_reverse=True
3391 map oN chain set sort=natural; set sort_reverse=True
3392 map oM chain set sort=mtime; set sort_reverse=True
3393 map oC chain set sort=ctime; set sort_reverse=True
3394 map oA chain set sort=atime; set sort_reverse=True
3395 map oT chain set sort=type; set sort_reverse=True
3396
3397 map dc get_cumulative_size
3398
3399 # Settings
3400 map zc toggle_option collapse_preview
3401 map zd toggle_option sort_directories_first
3402 map zh toggle_option show_hidden
3403 map <C-h> toggle_option show_hidden
3404 map zi toggle_option flushinput
3405 map zm toggle_option mouse_enabled
3406 map zp toggle_option preview_files
3407 map zP toggle_option preview_directories
3408 map zs toggle_option sort_case_insensitive
3409 map zu toggle_option autoupdate_cumulative_size
3410 map zv toggle_option use_preview_script
3411 map zf console filter
3412
3413 # Bookmarks
3414 map `<any> enter_bookmark %any
3415 map '<any> enter_bookmark %any
3416 map m<any> set_bookmark %any
3417 map um<any> unset_bookmark %any
3418
3419 map m<bg> draw_bookmarks
3420 copymap m<bg> um<bg> `<bg> '<bg>
3421
3422 # Generate all the chmod bindings with some python help:
3423 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3424 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3425 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3426 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3427 eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3428
3429 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3430 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3431 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3432 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3433 eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3434
3435 # ===================================================================
3436 # == Define keys for the console
3437 # ===================================================================
3438 # Note: Unmapped keys are passed directly to the console.
3439
3440 # Basic
3441 cmap <tab> eval fm.ui.console.tab()
3442 cmap <s-tab> eval fm.ui.console.tab(-1)
3443 cmap <ESC> eval fm.ui.console.close()
3444 cmap <CR> eval fm.ui.console.execute()
3445 cmap <C-l> redraw_window
3446
3447 copycmap <ESC> <C-c>
3448 copycmap <CR> <C-j>
3449
3450 # Move around
3451 cmap <up> eval fm.ui.console.history_move(-1)
3452 cmap <down> eval fm.ui.console.history_move(1)
3453 cmap <left> eval fm.ui.console.move(left=1)
3454 cmap <right> eval fm.ui.console.move(right=1)
3455 cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3456 cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3457
3458 # Line Editing
3459 cmap <backspace> eval fm.ui.console.delete(-1)
3460 cmap <delete> eval fm.ui.console.delete(0)
3461 cmap <C-w> eval fm.ui.console.delete_word()
3462 cmap <C-k> eval fm.ui.console.delete_rest(1)
3463 cmap <C-u> eval fm.ui.console.delete_rest(-1)
3464 cmap <C-y> eval fm.ui.console.paste()
3465
3466 # And of course the emacs way
3467 copycmap <up> <C-p>
3468 copycmap <down> <C-n>
3469 copycmap <left> <C-b>
3470 copycmap <right> <C-f>
3471 copycmap <home> <C-a>
3472 copycmap <end> <C-e>
3473 copycmap <delete> <C-d>
3474 copycmap <backspace> <C-h>
3475
3476 # Note: There are multiple ways to express backspaces. <backspace> (code 263)
3477 # and <backspace2> (code 127). To be sure, use both.
3478 copycmap <backspace> <backspace2>
3479
3480 # This special expression allows typing in numerals:
3481 cmap <allow_quantifiers> false
3482
3483 # ===================================================================
3484 # == Pager Keybindings
3485 # ===================================================================
3486
3487 # Movement
3488 pmap <down> pager_move down=1
3489 pmap <up> pager_move up=1
3490 pmap <left> pager_move left=4
3491 pmap <right> pager_move right=4
3492 pmap <home> pager_move to=0
3493 pmap <end> pager_move to=-1
3494 pmap <pagedown> pager_move down=1.0 pages=True
3495 pmap <pageup> pager_move up=1.0 pages=True
3496 pmap <C-d> pager_move down=0.5 pages=True
3497 pmap <C-u> pager_move up=0.5 pages=True
3498
3499 copypmap <UP> k <C-p>
3500 copypmap <DOWN> j <C-n> <CR>
3501 copypmap <LEFT> h
3502 copypmap <RIGHT> l
3503 copypmap <HOME> g
3504 copypmap <END> G
3505 copypmap <C-d> d
3506 copypmap <C-u> u
3507 copypmap <PAGEDOWN> n f <C-F> <Space>
3508 copypmap <PAGEUP> p b <C-B>
3509
3510 # Basic
3511 pmap <ESC> pager_close
3512 copypmap <ESC> q Q i <F3>
3513 pmap E edit_file
3514
3515 # ===================================================================
3516 # == Taskview Keybindings
3517 # ===================================================================
3518
3519 # Movement
3520 tmap <up> taskview_move up=1
3521 tmap <down> taskview_move down=1
3522 tmap <home> taskview_move to=0
3523 tmap <end> taskview_move to=-1
3524 tmap <pagedown> taskview_move down=1.0 pages=True
3525 tmap <pageup> taskview_move up=1.0 pages=True
3526 tmap <C-d> taskview_move down=0.5 pages=True
3527 tmap <C-u> taskview_move up=0.5 pages=True
3528
3529 copytmap <UP> k <C-p>
3530 copytmap <DOWN> j <C-n> <CR>
3531 copytmap <HOME> g
3532 copytmap <END> G
3533 copytmap <C-u> u
3534 copytmap <PAGEDOWN> n f <C-F> <Space>
3535 copytmap <PAGEUP> p b <C-B>
3536
3537 # Changing priority and deleting tasks
3538 tmap J eval -q fm.ui.taskview.task_move(-1)
3539 tmap K eval -q fm.ui.taskview.task_move(0)
3540 tmap dd eval -q fm.ui.taskview.task_remove()
3541 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3542 tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3543 tmap <delete> eval -q fm.ui.taskview.task_remove()
3544
3545 # Basic
3546 tmap <ESC> taskview_close
3547 copytmap <ESC> q Q w <C-c>
3548 #+end_src
3549
3550 *** scope.sh
3551 :PROPERTIES:
3552 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3553 :END:
3554
3555 #+begin_src sh :tangle no
3556 # ranger supports enhanced previews. If the option "use_preview_script"
3557 # is set to True and this file exists, this script will be called and its
3558 # output is displayed in ranger. ANSI color codes are supported.
3559
3560 # NOTES: This script is considered a configuration file. If you upgrade
3561 # ranger, it will be left untouched. (You must update it yourself.)
3562 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3563
3564 # Meanings of exit codes:
3565 # code | meaning | action of ranger
3566 # -----+------------+-------------------------------------------
3567 # 0 | success | success. display stdout as preview
3568 # 1 | no preview | failure. display no preview at all
3569 # 2 | plain text | display the plain content of the file
3570 # 3 | fix width | success. Don't reload when width changes
3571 # 4 | fix height | success. Don't reload when height changes
3572 # 5 | fix both | success. Don't ever reload
3573
3574 # Meaningful aliases for arguments:
3575 path="$1" # Full path of the selected file
3576 width="$2" # Width of the preview pane (number of fitting characters)
3577 height="$3" # Height of the preview pane (number of fitting characters)
3578
3579 maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3580
3581 # Find out something about the file:
3582 mimetype=$(file --mime-type -Lb "$path")
3583 extension=${path##*.}
3584
3585 # Functions:
3586 # runs a command and saves its output into $output. Useful if you need
3587 # the return value AND want to use the output in a pipe
3588 try() { output=$(eval '"$@"'); }
3589
3590 # writes the output of the previouosly used "try" command
3591 dump() { echo "$output"; }
3592
3593 # a common post-processing function used after most commands
3594 trim() { head -n "$maxln"; }
3595
3596 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3597 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3598
3599 case "$extension" in
3600 # Archive extensions:
3601 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3602 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3603 try als "$path" && { dump | trim; exit 0; }
3604 try acat "$path" && { dump | trim; exit 3; }
3605 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3606 exit 1;;
3607 rar)
3608 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3609 # PDF documents:
3610 pdf)
3611 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3612 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3613 # BitTorrent Files
3614 torrent)
3615 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3616 # HTML Pages:
3617 htm|html|xhtml)
3618 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3619 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3620 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3621 ;; # fall back to highlight/cat if the text browsers fail
3622 esac
3623
3624 case "$mimetype" in
3625 # Syntax highlight for text files:
3626 text/* | */xml)
3627 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3628 # Ascii-previews of images:
3629 image/*)
3630 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3631 # Display information about media files:
3632 video/* | audio/*)
3633 exiftool "$path" && exit 5
3634 # Use sed to remove spaces so the output fits into the narrow window
3635 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3636 esac
3637
3638 exit 1
3639 #+end_src
3640
3641 ** redshift
3642 :PROPERTIES:
3643 :header-args+: :tangle ~/.config/redshift.conf :comments none
3644 :END:
3645
3646 #+begin_src conf
3647 ; Global settings for redshift
3648 [redshift]
3649 ; Set the day and night screen temperatures (Neutral is 6500K)
3650 ;temp-day=5700
3651 ;temp-night=3500
3652
3653 ;temp-day=6500
3654 temp-day=6200
3655 ;temp-night=4800
3656 ;temp-night=5000
3657 ;temp-night=4500
3658 temp-night=4000
3659
3660 ; Enable/Disable a smooth transition between day and night
3661 ; 0 will cause a direct change from day to night screen temperature.
3662 ; 1 will gradually increase or decrease the screen temperature.
3663 transition=1
3664
3665 ; Set the screen brightness. Default is 1.0.
3666 ;brightness=0.9
3667 ; It is also possible to use different settings for day and night
3668 ; since version 1.8.
3669 ;brightness-day=0.7
3670 ;brightness-night=0.4
3671 ; Set the screen gamma (for all colors, or each color channel
3672 ; individually)
3673 ;gamma=0.8
3674 ;gamma=1.0
3675 ;gamma=0.8:0.7:0.8
3676 ; This can also be set individually for day and night since
3677 ; version 1.10.
3678 ;gamma-day=0.8:0.7:0.8
3679 ;gamma-night=0.6
3680
3681 ; Set the location-provider: 'geoclue2' or 'manual'
3682 ; type 'redshift -l list' to see possible values.
3683 ; The location provider settings are in a different section.
3684 ;location-provider=manual
3685 location-provider=geoclue2
3686
3687 ; Set the adjustment-method: 'randr', 'vidmode'
3688 ; type 'redshift -m list' to see all possible values.
3689 ; 'randr' is the preferred method, 'vidmode' is an older API.
3690 ; but works in some cases when 'randr' does not.
3691 ; The adjustment method settings are in a different section.
3692 adjustment-method=randr
3693
3694 ; Configuration of the location-provider:
3695 ; type 'redshift -l PROVIDER:help' to see the settings.
3696 ; ex: 'redshift -l manual:help'
3697 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3698 ; are negative numbers.
3699 ;[manual]
3700 ;lat=48.1
3701 ;lon=11.6
3702
3703 ; Configuration of the adjustment-method
3704 ; type 'redshift -m METHOD:help' to see the settings.
3705 ; ex: 'redshift -m randr:help'
3706 ; In this example, randr is configured to adjust screen 1.
3707 ; Note that the numbering starts from 0, so this is actually the
3708 ; second screen. If this option is not specified, Redshift will try
3709 ; to adjust _all_ screens.
3710 ;[randr]
3711 ;screen=1
3712 #+end_src
3713
3714 ** rofi
3715 :PROPERTIES:
3716 :header-args+: :tangle ~/.config/rofi/config
3717 :END:
3718
3719 #+begin_src conf
3720 ! rofi.font: Ubuntu Mono 13
3721 ! rofi.font: Inconsolata 16
3722 ! rofi.font: Iosevka 13
3723 ! rofi.font: Source Code Pro 11
3724 rofi.font: Source Code Pro 10.5
3725 rofi.modi: run,window
3726 ! rofi.width: 640
3727 rofi.width: 600
3728 !rofi.location: 2
3729 !rofi.yoffset: 200
3730 rofi.monitor: -1
3731 !rofi.lines: 10
3732
3733 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3734 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3735 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3736
3737 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3738 #+end_src
3739
3740 ** rofi-pass
3741 :PROPERTIES:
3742 :header-args+: :tangle ~/.config/rofi-pass/config
3743 :END:
3744
3745 #+begin_src conf
3746 # permanently set alternative root dir
3747 # root=/path/to/root
3748
3749 # rofi command. Make sure to have "$@" as last argument
3750 _rofi () {
3751 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3752 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3753 }
3754
3755 # xdotool needs the keyboard layout to be set using setxkbmap
3756 # You can do this in your autostart scripts (e.g. xinitrc)
3757
3758 # If for some reason, you cannot do this, you can set the command here.
3759 # and set fix_layout to true
3760 fix_layout=false
3761
3762 layout_cmd () {
3763 setxkbmap us
3764 }
3765
3766 # fields to be used
3767 URL_field='url'
3768 USERNAME_field='user'
3769 AUTOTYPE_field='autotype'
3770
3771 # delay to be used for :delay keyword
3772 delay=2
3773
3774 ## Programs to be used
3775 # Editor
3776 EDITOR='gvim -f'
3777
3778 # Browser
3779 BROWSER='chromium'
3780
3781 ## Misc settings
3782
3783 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3784 auto_enter='false'
3785 notify='false'
3786 default_autotype='user :tab pass'
3787
3788 # color of the help messages
3789 # leave empty for autodetection
3790 help_color="#4872FF"
3791
3792 # Clipboard settings
3793 # Possible options: primary, clipboard, both
3794 clip=primary
3795
3796 # Options for generating new password entries
3797 # default_user is also used for password files that have no user field.
3798 default_user=aminb
3799 default_user2=aminban
3800 password_length=30
3801
3802 # Custom Keybindings
3803 #autotype="Alt+1"
3804 autotype="Alt+m"
3805 type_user="Alt+2"
3806 type_pass="Alt+3"
3807 open_url="Alt+4"
3808 copy_name="Alt+u"
3809 copy_url="Alt+l"
3810 copy_pass="Alt+p"
3811 show="Alt+o"
3812 copy_entry="Alt+2"
3813 type_entry="Alt+1"
3814 copy_menu="Alt+c"
3815 action_menu="Alt+a"
3816 type_menu="Alt+t"
3817 help="Alt+h"
3818 switch="Alt+x"
3819 insert_pass="Alt+n"
3820 #+end_src
3821
3822 ** sway
3823
3824 *** main
3825 :PROPERTIES:
3826 :header-args+: :tangle ~/.config/sway/config
3827 :END:
3828
3829 #+begin_src conf
3830 ### Variables
3831 # super
3832 set $mod Mod4
3833 # alt
3834 set $mod2 Mod1
3835 set $left h
3836 set $down j
3837 set $up k
3838 set $right l
3839 set $term urxvt
3840 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3841
3842 ### Output configuration
3843 #
3844 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3845 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3846 #
3847 # Example configuration:
3848 #
3849 # output HDMI-A-1 resolution 1920x1080 position 1920,0
3850 #
3851 # You can get the names of your outputs by running: swaymsg -t get_outputs
3852
3853 ### Idle configuration
3854
3855 exec swayidle \
3856 timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
3857 resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
3858 before-sleep swaylock
3859
3860
3861 ### Key bindings
3862 #
3863 # Basics:
3864 #
3865 # start a terminal
3866 bindsym $mod+Return exec $term
3867
3868 # kill focused window
3869 bindsym $mod+Shift+q kill
3870
3871 # start your launcher
3872 bindsym $mod+d exec $menu
3873
3874 # password manager
3875 bindsym $mod2+space exec rofi-pass
3876
3877 # Drag floating windows by holding down $mod and left mouse button.
3878 # Resize them with right mouse button + $mod.
3879 # Despite the name, also works for non-floating windows.
3880 # Change normal to inverse to use left mouse button for resizing and right
3881 # mouse button for dragging.
3882 floating_modifier $mod normal
3883
3884 # reload the configuration file
3885 bindsym $mod+Shift+c reload
3886
3887 # exit sway (logs you out of your wayland session)
3888 bindsym $mod+Shift+e exit
3889
3890 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3891 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3892 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3893
3894 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3895 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3896 bindsym XF86AudioMute exec pamixer --toggle-mute
3897 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3898
3899 bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
3900
3901 # original sway workspace switch and window move
3902 bindsym $mod+bracketleft workspace prev
3903 bindsym $mod+bracketright workspace next
3904 bindsym $mod+braceleft move container to workspace prev
3905 bindsym $mod+braceright move container to workspace next
3906
3907 # bspwm-esque workspace switch and window move
3908 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3909 bindsym $mod2+bracketright exec sway-ws-util switch next
3910 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3911 bindsym $mod2+braceright exec sway-ws-util move next follow
3912 #
3913 # Moving around:
3914 #
3915 # Move your focus around
3916 bindsym $mod+$left focus left
3917 bindsym $mod+$down focus down
3918 bindsym $mod+$up focus up
3919 bindsym $mod+$right focus right
3920 # or use $mod+[up|down|left|right]
3921 bindsym $mod+Left focus left
3922 bindsym $mod+Down focus down
3923 bindsym $mod+Up focus up
3924 bindsym $mod+Right focus right
3925
3926 # _move_ the focused window with the same, but add Shift
3927 bindsym $mod+Shift+$left move left
3928 bindsym $mod+Shift+$down move down
3929 bindsym $mod+Shift+$up move up
3930 bindsym $mod+Shift+$right move right
3931 # ditto, with arrow keys
3932 bindsym $mod+Shift+Left move left
3933 bindsym $mod+Shift+Down move down
3934 bindsym $mod+Shift+Up move up
3935 bindsym $mod+Shift+Right move right
3936 #
3937 # Workspaces:
3938 #
3939 # switch to workspace
3940 bindsym $mod+1 workspace 1
3941 bindsym $mod+2 workspace 2
3942 bindsym $mod+3 workspace 3
3943 bindsym $mod+4 workspace 4
3944 bindsym $mod+5 workspace 5
3945 bindsym $mod+6 workspace 6
3946 bindsym $mod+7 workspace 7
3947 bindsym $mod+8 workspace 8
3948 bindsym $mod+9 workspace 9
3949 bindsym $mod+0 workspace 10
3950 # move focused container to workspace
3951 bindsym $mod+Shift+1 move container to workspace 1
3952 bindsym $mod+Shift+2 move container to workspace 2
3953 bindsym $mod+Shift+3 move container to workspace 3
3954 bindsym $mod+Shift+4 move container to workspace 4
3955 bindsym $mod+Shift+5 move container to workspace 5
3956 bindsym $mod+Shift+6 move container to workspace 6
3957 bindsym $mod+Shift+7 move container to workspace 7
3958 bindsym $mod+Shift+8 move container to workspace 8
3959 bindsym $mod+Shift+9 move container to workspace 9
3960 bindsym $mod+Shift+0 move container to workspace 10
3961 # Note: workspaces can have any name you want, not just numbers.
3962 # We just use 1-10 as the default.
3963 #
3964 # Layout stuff:
3965 #
3966 # You can "split" the current object of your focus with
3967 # $mod+b or $mod+v, for horizontal and vertical splits
3968 # respectively.
3969 bindsym $mod+b splith
3970 bindsym $mod+v splitv
3971
3972 # Switch the current container between different layout styles
3973 bindsym $mod+s layout stacking
3974 bindsym $mod+w layout tabbed
3975 bindsym $mod+e layout toggle split
3976
3977 # Make the current focus fullscreen
3978 bindsym $mod+f fullscreen
3979
3980 # Toggle the current focus between tiling and floating mode
3981 bindsym $mod+Shift+space floating toggle
3982
3983 # Swap focus between the tiling area and the floating area
3984 bindsym $mod+space focus mode_toggle
3985
3986 # move focus to the parent container
3987 bindsym $mod+a focus parent
3988 #
3989 # Scratchpad:
3990 #
3991 # Sway has a "scratchpad", which is a bag of holding for windows.
3992 # You can send windows there and get them back later.
3993
3994 # Move the currently focused window to the scratchpad
3995 bindsym $mod+Shift+minus move scratchpad
3996
3997 # Show the next scratchpad window or hide the focused scratchpad window.
3998 # If there are multiple scratchpad windows, this command cycles through them.
3999 bindsym $mod+minus scratchpad show
4000 #
4001 # Resizing containers:
4002 #
4003 mode "resize" {
4004 # left will shrink the containers width
4005 # right will grow the containers width
4006 # up will shrink the containers height
4007 # down will grow the containers height
4008 bindsym $left resize shrink width 10px
4009 bindsym $down resize grow height 10px
4010 bindsym $up resize shrink height 10px
4011 bindsym $right resize grow width 10px
4012
4013 # ditto, with arrow keys
4014 bindsym Left resize shrink width 10px
4015 bindsym Down resize grow height 10px
4016 bindsym Up resize shrink height 10px
4017 bindsym Right resize grow width 10px
4018
4019 # return to default mode
4020 bindsym Return mode "default"
4021 bindsym Escape mode "default"
4022 }
4023 bindsym $mod+Shift+r mode "resize"
4024
4025 #
4026 # Power button
4027 #
4028
4029 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
4030 mode "$mode_system" {
4031 bindsym l exec swaylock, mode "default"
4032 bindsym e exec swaymsg exit, mode "default"
4033 bindsym s exec systemctl suspend, mode "default"
4034 bindsym h exec systemctl hibernate, mode "default"
4035 bindsym r exec systemctl reboot, mode "default"
4036 bindsym Shift+s exec systemctl poweroff -i, mode "default"
4037
4038 # back to normal: Enter, Escape, or q
4039 bindsym Return mode "default"
4040 bindsym Escape mode "default"
4041 bindsym q mode "default"
4042 }
4043 bindsym XF86PowerOff mode "$mode_system"
4044
4045 #
4046 # Presentation mode
4047 #
4048
4049 bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
4050
4051 #
4052 # Notifications
4053 #
4054
4055 bindsym $mod+Shift+n mode notifications
4056 mode notifications {
4057 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
4058 bindsym d exec makoctl dismiss; mode default
4059 bindsym Shift+d exec makoctl dismiss -a; mode default
4060
4061 bindsym Escape mode default
4062 bindsym q mode default
4063 }
4064
4065 #
4066 # Screenshotting
4067 #
4068
4069 bindsym $mod+Shift+s mode screenshot
4070 mode screenshot {
4071 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4072 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4073
4074 bindsym Escape mode default
4075 bindsym q mode default
4076 }
4077
4078 #
4079 # Status Bar:
4080 #
4081 # Read `man 5 sway-bar` for more information about this section.
4082 bar {
4083 position bottom
4084 colors {
4085 statusline #ffffff
4086 background #323232
4087 inactive_workspace #32323200 #32323200 #5c5c5c
4088 }
4089 status_command i3status | my-i3status.py
4090 }
4091
4092 # font pango: benis uushi 9
4093 # font pango: Ubuntu Mono 11
4094 # font pango: Inconsolata 11
4095 font pango: DejaVu Sans Mono 9
4096 # font pango: Liberation Mono 9
4097
4098 exec xrdb .Xresources
4099 exec pgrep -x "systemd-inhibit" || \
4100 systemd-inhibit --what=handle-power-key --who=aminb \
4101 --why="Handle power button in sway" sleep infinity
4102 exec mako 2>&1 >/tmp/mako.log
4103 exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4104
4105 include /etc/sway/config.d/*
4106 include ~/.config/sway/`hostname`
4107
4108 exec systemd-notify --ready || true
4109
4110 #+end_src
4111
4112 *** langa
4113 :PROPERTIES:
4114 :header-args+: :tangle ~/.config/sway/langa
4115 :END:
4116
4117 #+begin_src conf
4118 input "2:7:SynPS/2_Synaptics_TouchPad" {
4119 events disabled
4120 dwt enabled
4121 tap enabled
4122 natural_scroll enabled
4123 click_method clickfinger
4124 }
4125
4126 input "1:1:AT_Translated_Set_2_keyboard" {
4127 repeat_delay 200
4128 repeat_rate 45
4129 xkb_layout us_ab,ir
4130 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4131 }
4132 #+end_src
4133
4134 *** shemshak
4135 :PROPERTIES:
4136 :header-args+: :tangle ~/.config/sway/shemshak
4137 :END:
4138
4139 #+begin_src conf
4140 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4141 dwt enabled
4142 tap enabled
4143 natural_scroll enabled
4144 middle_emulation enabled
4145 click_method clickfinger
4146 }
4147
4148 input "1:1:AT_Translated_Set_2_keyboard" {
4149 repeat_delay 200
4150 repeat_rate 45
4151 xkb_layout us,ir
4152 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4153 }
4154 #+end_src
4155 ** swaylock
4156 :PROPERTIES:
4157 :header-args+: :tangle ~/.config/swaylock/config
4158 :END:
4159
4160 #+begin_src conf
4161 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4162 scaling=fill
4163 #+end_src
4164
4165 ** TLP
4166
4167 *** langa
4168
4169 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4170 # ------------------------------------------------------------------------------
4171 # tlp - Parameters for power saving
4172 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4173
4174 # Hint: some features are disabled by default, remove the leading # to enable
4175 # them.
4176
4177 # Set to 0 to disable, 1 to enable TLP.
4178 TLP_ENABLE=1
4179
4180 # Operation mode when no power supply can be detected: AC, BAT.
4181 # Concerns some desktop and embedded hardware only.
4182 TLP_DEFAULT_MODE=AC
4183
4184 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4185 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4186 TLP_PERSISTENT_DEFAULT=0
4187
4188 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4189 # Non-zero value enables, zero disables laptop mode.
4190 DISK_IDLE_SECS_ON_AC=0
4191 DISK_IDLE_SECS_ON_BAT=2
4192
4193 # Dirty page values (timeouts in secs).
4194 MAX_LOST_WORK_SECS_ON_AC=15
4195 MAX_LOST_WORK_SECS_ON_BAT=60
4196
4197 # Hint: CPU parameters below are disabled by default, remove the leading #
4198 # to enable them, otherwise kernel default values are used.
4199
4200 # Select a CPU frequency scaling governor.
4201 # Intel Core i processor with intel_pstate driver:
4202 # powersave(*), performance.
4203 # Older hardware with acpi-cpufreq driver:
4204 # ondemand(*), powersave, performance, conservative, schedutil.
4205 # (*) is recommended.
4206 # Hint: use tlp-stat -p to show the active driver and available governors.
4207 # Important:
4208 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
4209 # efficient for *almost all* workloads and therefore kernel and most
4210 # distributions have chosen them as defaults. If you still want to change,
4211 # you should know what you're doing! You *must* disable your distribution's
4212 # governor settings or conflicts will occur.
4213 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4214 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4215
4216 # Set the min/max frequency available for the scaling governor.
4217 # Possible values strongly depend on your CPU. For available frequencies see
4218 # the output of tlp-stat -p.
4219 #CPU_SCALING_MIN_FREQ_ON_AC=0
4220 #CPU_SCALING_MAX_FREQ_ON_AC=0
4221 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4222 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4223
4224 # Set energy performance hints (HWP) for Intel P-state governor:
4225 # performance, balance_performance, default, balance_power, power
4226 # Values are given in order of increasing power saving.
4227 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4228 CPU_HWP_ON_AC=balance_performance
4229 CPU_HWP_ON_BAT=balance_power
4230
4231 # Set Intel P-state performance: 0..100 (%).
4232 # Limit the max/min P-state to control the power dissipation of the CPU.
4233 # Values are stated as a percentage of the available performance.
4234 # Requires an Intel Core i processor with intel_pstate driver.
4235 #CPU_MIN_PERF_ON_AC=0
4236 #CPU_MAX_PERF_ON_AC=100
4237 #CPU_MIN_PERF_ON_BAT=0
4238 #CPU_MAX_PERF_ON_BAT=30
4239
4240 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4241 # Requires an Intel Core i processor.
4242 # Important:
4243 # - This may conflict with your distribution's governor settings
4244 # - A value of 1 does *not* activate boosting, it just allows it
4245 #CPU_BOOST_ON_AC=1
4246 #CPU_BOOST_ON_BAT=0
4247
4248 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4249 # 0=disable, 1=enable.
4250 SCHED_POWERSAVE_ON_AC=0
4251 SCHED_POWERSAVE_ON_BAT=1
4252
4253 # Kernel NMI Watchdog:
4254 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
4255 NMI_WATCHDOG=0
4256
4257 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4258 # Frequency voltage pairs are written to:
4259 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4260 # CAUTION: only use this, if you thoroughly understand what you are doing!
4261 #PHC_CONTROLS="F:V F:V F:V F:V"
4262
4263 # Set CPU performance versus energy savings policy:
4264 # performance, balance-performance, default, balance-power, power.
4265 # Values are given in order of increasing power saving.
4266 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4267 ENERGY_PERF_POLICY_ON_AC=performance
4268 ENERGY_PERF_POLICY_ON_BAT=balance-power
4269
4270 # Disk devices; separate multiple devices with spaces (default: sda).
4271 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4272 DISK_DEVICES="sda sdb"
4273
4274 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4275 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4276 # Separate values for multiple disks with spaces. Use the special value 'keep'
4277 # to keep the hardware default for the particular disk.
4278 DISK_APM_LEVEL_ON_AC="254 254"
4279 DISK_APM_LEVEL_ON_BAT="128 128"
4280
4281 # Hard disk spin down timeout:
4282 # 0: spin down disabled
4283 # 1..240: timeouts from 5s to 20min (in units of 5s)
4284 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4285 # See 'man hdparm' for details.
4286 # Separate values for multiple disks with spaces. Use the special value 'keep'
4287 # to keep the hardware default for the particular disk.
4288 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4289 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4290
4291 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4292 # Separate values for multiple disks with spaces. Use the special value 'keep'
4293 # to keep the kernel default scheduler for the particular disk.
4294 #DISK_IOSCHED="cfq cfq"
4295
4296 # AHCI link power management (ALPM) for disk devices:
4297 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4298 # (*) Kernel >= 4.15 required, then recommended.
4299 # Multiple values separated with spaces are tried sequentially until success.
4300 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4301 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4302
4303 # Exclude host devices from AHCI link power management.
4304 # Separate multiple hosts with spaces.
4305 #SATA_LINKPWR_BLACKLIST="host1"
4306
4307 # Runtime Power Management for AHCI host and disks devices:
4308 # on=disable, auto=enable.
4309 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4310 #AHCI_RUNTIME_PM_ON_AC=on
4311 #AHCI_RUNTIME_PM_ON_BAT=on
4312
4313 # Seconds of inactivity before disk is suspended.
4314 AHCI_RUNTIME_PM_TIMEOUT=15
4315
4316 # PCI Express Active State Power Management (PCIe ASPM):
4317 # default, performance, powersave.
4318 PCIE_ASPM_ON_AC=performance
4319 PCIE_ASPM_ON_BAT=powersave
4320
4321 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4322 # auto = mid on BAT, high on AC; default = use hardware defaults.
4323 RADEON_POWER_PROFILE_ON_AC=high
4324 RADEON_POWER_PROFILE_ON_BAT=low
4325
4326 # Radeon dynamic power management method (DPM): battery, performance.
4327 RADEON_DPM_STATE_ON_AC=performance
4328 RADEON_DPM_STATE_ON_BAT=battery
4329
4330 # Radeon DPM performance level: auto, low, high; auto is recommended.
4331 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4332 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4333
4334 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4335 WIFI_PWR_ON_AC=off
4336 WIFI_PWR_ON_BAT=on
4337
4338 # Disable wake on LAN: Y/N.
4339 WOL_DISABLE=Y
4340
4341 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4342 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4343 SOUND_POWER_SAVE_ON_AC=0
4344 SOUND_POWER_SAVE_ON_BAT=0
4345
4346 # Disable controller too (HDA only): Y/N.
4347 SOUND_POWER_SAVE_CONTROLLER=N
4348
4349 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4350 # Drive can be powered on again by releasing (and reinserting) the eject lever
4351 # or by pressing the disc eject button on newer models.
4352 # Note: an UltraBay/MediaBay hard disk is never powered off.
4353 BAY_POWEROFF_ON_AC=0
4354 BAY_POWEROFF_ON_BAT=0
4355 # Optical drive device to power off (default sr0).
4356 BAY_DEVICE="sr0"
4357
4358 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4359 RUNTIME_PM_ON_AC=on
4360 RUNTIME_PM_ON_BAT=auto
4361
4362 # Exclude PCI(e) device adresses the following list from Runtime PM
4363 # (separate with spaces). Use lspci to get the adresses (1st column).
4364 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4365
4366 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4367 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4368 # prevents accidential power-on of dGPU in hybrid graphics setups.
4369 # Use "" to disable the feature completely.
4370 # Separate multiple drivers with spaces.
4371 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4372
4373 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4374 USB_AUTOSUSPEND=1
4375
4376 # Exclude listed devices from USB autosuspend (separate with spaces).
4377 # Use lsusb to get the ids.
4378 # Note: input devices (usbhid) are excluded automatically
4379 #USB_BLACKLIST="1111:2222 3333:4444"
4380
4381 # Bluetooth devices are excluded from USB autosuspend:
4382 # 0=do not exclude, 1=exclude.
4383 USB_BLACKLIST_BTUSB=0
4384
4385 # Phone devices are excluded from USB autosuspend:
4386 # 0=do not exclude, 1=exclude (enable charging).
4387 USB_BLACKLIST_PHONE=0
4388
4389 # Printers are excluded from USB autosuspend:
4390 # 0=do not exclude, 1=exclude.
4391 USB_BLACKLIST_PRINTER=1
4392
4393 # WWAN devices are excluded from USB autosuspend:
4394 # 0=do not exclude, 1=exclude.
4395 USB_BLACKLIST_WWAN=1
4396
4397 # Include listed devices into USB autosuspend even if already excluded
4398 # by the blacklists above (separate with spaces).
4399 # Use lsusb to get the ids.
4400 #USB_WHITELIST="1111:2222 3333:4444"
4401
4402 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4403 # (workaround for USB devices that cause shutdown problems).
4404 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4405
4406 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4407 # on system startup: 0=disable, 1=enable.
4408 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4409 # are ignored when this is enabled!
4410 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4411 RESTORE_DEVICE_STATE_ON_STARTUP=0
4412
4413 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4414 # Separate multiple devices with spaces.
4415 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4416 DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
4417
4418 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4419 # Separate multiple devices with spaces.
4420 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4421
4422 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4423 # (workaround for devices that are blocking shutdown).
4424 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4425
4426 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4427 # (to prevent other operating systems from missing radios).
4428 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4429
4430 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4431 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4432
4433 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4434 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4435
4436 # Radio devices to disable on battery when not in use (not connected):
4437 # bluetooth, wifi, wwan.
4438 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4439
4440 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4441 # required). Charging starts when the remaining capacity falls below the
4442 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4443 # Main / Internal battery (values in %)
4444 #START_CHARGE_THRESH_BAT0=75
4445 #STOP_CHARGE_THRESH_BAT0=80
4446 # Ultrabay / Slice / Replaceable battery (values in %)
4447 #START_CHARGE_THRESH_BAT1=75
4448 #STOP_CHARGE_THRESH_BAT1=80
4449
4450 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4451 #RESTORE_THRESHOLDS_ON_BAT=1
4452
4453 # ------------------------------------------------------------------------------
4454 # tlp-rdw - Parameters for the radio device wizard
4455 # Possible devices: bluetooth, wifi, wwan.
4456
4457 # Hints:
4458 # - Parameters are disabled by default, remove the leading # to enable them
4459 # - Separate multiple radio devices with spaces
4460
4461 # Radio devices to disable on connect.
4462 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4463 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4464 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4465
4466 # Radio devices to enable on disconnect.
4467 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4468 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4469 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4470
4471 # Radio devices to enable/disable when docked.
4472 #DEVICES_TO_ENABLE_ON_DOCK=""
4473 #DEVICES_TO_DISABLE_ON_DOCK=""
4474
4475 # Radio devices to enable/disable when undocked.
4476 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4477 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4478 #+end_src
4479
4480 *** shemshak
4481
4482 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
4483 # ------------------------------------------------------------------------------
4484 # tlp - Parameters for power saving
4485 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4486
4487 # Hint: some features are disabled by default, remove the leading # to enable
4488 # them.
4489
4490 # Set to 0 to disable, 1 to enable TLP.
4491 TLP_ENABLE=1
4492
4493 # Operation mode when no power supply can be detected: AC, BAT.
4494 # Concerns some desktop and embedded hardware only.
4495 TLP_DEFAULT_MODE=AC
4496
4497 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4498 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4499 TLP_PERSISTENT_DEFAULT=0
4500
4501 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4502 # Non-zero value enables, zero disables laptop mode.
4503 DISK_IDLE_SECS_ON_AC=0
4504 DISK_IDLE_SECS_ON_BAT=2
4505
4506 # Dirty page values (timeouts in secs).
4507 MAX_LOST_WORK_SECS_ON_AC=15
4508 MAX_LOST_WORK_SECS_ON_BAT=60
4509
4510 # Hint: CPU parameters below are disabled by default, remove the leading #
4511 # to enable them, otherwise kernel default values are used.
4512
4513 # Select a CPU frequency scaling governor.
4514 # Intel Core i processor with intel_pstate driver:
4515 # powersave(*), performance.
4516 # Older hardware with acpi-cpufreq driver:
4517 # ondemand(*), powersave, performance, conservative, schedutil.
4518 # (*) is recommended.
4519 # Hint: use tlp-stat -p to show the active driver and available governors.
4520 # Important:
4521 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
4522 # efficient for *almost all* workloads and therefore kernel and most
4523 # distributions have chosen them as defaults. If you still want to change,
4524 # you should know what you're doing! You *must* disable your distribution's
4525 # governor settings or conflicts will occur.
4526 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4527 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4528
4529 # Set the min/max frequency available for the scaling governor.
4530 # Possible values strongly depend on your CPU. For available frequencies see
4531 # the output of tlp-stat -p.
4532 #CPU_SCALING_MIN_FREQ_ON_AC=0
4533 #CPU_SCALING_MAX_FREQ_ON_AC=0
4534 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4535 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4536
4537 # Set energy performance hints (HWP) for Intel P-state governor:
4538 # performance, balance_performance, default, balance_power, power
4539 # Values are given in order of increasing power saving.
4540 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4541 CPU_HWP_ON_AC=balance_performance
4542 CPU_HWP_ON_BAT=balance_power
4543
4544 # Set Intel P-state performance: 0..100 (%).
4545 # Limit the max/min P-state to control the power dissipation of the CPU.
4546 # Values are stated as a percentage of the available performance.
4547 # Requires an Intel Core i processor with intel_pstate driver.
4548 #CPU_MIN_PERF_ON_AC=0
4549 #CPU_MAX_PERF_ON_AC=100
4550 #CPU_MIN_PERF_ON_BAT=0
4551 #CPU_MAX_PERF_ON_BAT=30
4552
4553 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4554 # Requires an Intel Core i processor.
4555 # Important:
4556 # - This may conflict with your distribution's governor settings
4557 # - A value of 1 does *not* activate boosting, it just allows it
4558 #CPU_BOOST_ON_AC=1
4559 #CPU_BOOST_ON_BAT=0
4560
4561 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4562 # 0=disable, 1=enable.
4563 SCHED_POWERSAVE_ON_AC=0
4564 SCHED_POWERSAVE_ON_BAT=1
4565
4566 # Kernel NMI Watchdog:
4567 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
4568 NMI_WATCHDOG=0
4569
4570 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4571 # Frequency voltage pairs are written to:
4572 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4573 # CAUTION: only use this, if you thoroughly understand what you are doing!
4574 #PHC_CONTROLS="F:V F:V F:V F:V"
4575
4576 # Set CPU performance versus energy savings policy:
4577 # performance, balance-performance, default, balance-power, power.
4578 # Values are given in order of increasing power saving.
4579 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4580 ENERGY_PERF_POLICY_ON_AC=performance
4581 ENERGY_PERF_POLICY_ON_BAT=balance-power
4582
4583 # Disk devices; separate multiple devices with spaces (default: sda).
4584 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4585 DISK_DEVICES="sda sdb"
4586
4587 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4588 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4589 # Separate values for multiple disks with spaces. Use the special value 'keep'
4590 # to keep the hardware default for the particular disk.
4591 DISK_APM_LEVEL_ON_AC="254 254"
4592 DISK_APM_LEVEL_ON_BAT="128 128"
4593
4594 # Hard disk spin down timeout:
4595 # 0: spin down disabled
4596 # 1..240: timeouts from 5s to 20min (in units of 5s)
4597 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4598 # See 'man hdparm' for details.
4599 # Separate values for multiple disks with spaces. Use the special value 'keep'
4600 # to keep the hardware default for the particular disk.
4601 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4602 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4603
4604 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4605 # Separate values for multiple disks with spaces. Use the special value 'keep'
4606 # to keep the kernel default scheduler for the particular disk.
4607 #DISK_IOSCHED="cfq cfq"
4608
4609 # AHCI link power management (ALPM) for disk devices:
4610 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4611 # (*) Kernel >= 4.15 required, then recommended.
4612 # Multiple values separated with spaces are tried sequentially until success.
4613 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4614 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4615
4616 # Exclude host devices from AHCI link power management.
4617 # Separate multiple hosts with spaces.
4618 #SATA_LINKPWR_BLACKLIST="host1"
4619
4620 # Runtime Power Management for AHCI host and disks devices:
4621 # on=disable, auto=enable.
4622 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4623 #AHCI_RUNTIME_PM_ON_AC=on
4624 #AHCI_RUNTIME_PM_ON_BAT=on
4625
4626 # Seconds of inactivity before disk is suspended.
4627 AHCI_RUNTIME_PM_TIMEOUT=15
4628
4629 # PCI Express Active State Power Management (PCIe ASPM):
4630 # default, performance, powersave.
4631 PCIE_ASPM_ON_AC=performance
4632 PCIE_ASPM_ON_BAT=powersave
4633
4634 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4635 # auto = mid on BAT, high on AC; default = use hardware defaults.
4636 RADEON_POWER_PROFILE_ON_AC=high
4637 RADEON_POWER_PROFILE_ON_BAT=low
4638
4639 # Radeon dynamic power management method (DPM): battery, performance.
4640 RADEON_DPM_STATE_ON_AC=performance
4641 RADEON_DPM_STATE_ON_BAT=battery
4642
4643 # Radeon DPM performance level: auto, low, high; auto is recommended.
4644 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4645 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4646
4647 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4648 WIFI_PWR_ON_AC=off
4649 WIFI_PWR_ON_BAT=on
4650
4651 # Disable wake on LAN: Y/N.
4652 WOL_DISABLE=Y
4653
4654 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4655 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4656 SOUND_POWER_SAVE_ON_AC=0
4657 SOUND_POWER_SAVE_ON_BAT=0
4658
4659 # Disable controller too (HDA only): Y/N.
4660 SOUND_POWER_SAVE_CONTROLLER=N
4661
4662 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4663 # Drive can be powered on again by releasing (and reinserting) the eject lever
4664 # or by pressing the disc eject button on newer models.
4665 # Note: an UltraBay/MediaBay hard disk is never powered off.
4666 BAY_POWEROFF_ON_AC=0
4667 BAY_POWEROFF_ON_BAT=0
4668 # Optical drive device to power off (default sr0).
4669 BAY_DEVICE="sr0"
4670
4671 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4672 RUNTIME_PM_ON_AC=on
4673 RUNTIME_PM_ON_BAT=auto
4674
4675 # Exclude PCI(e) device adresses the following list from Runtime PM
4676 # (separate with spaces). Use lspci to get the adresses (1st column).
4677 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4678 RUNTIME_PM_BLACKLIST="01:00.0"
4679
4680 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4681 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4682 # prevents accidential power-on of dGPU in hybrid graphics setups.
4683 # Use "" to disable the feature completely.
4684 # Separate multiple drivers with spaces.
4685 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4686
4687 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4688 USB_AUTOSUSPEND=1
4689
4690 # Exclude listed devices from USB autosuspend (separate with spaces).
4691 # Use lsusb to get the ids.
4692 # Note: input devices (usbhid) are excluded automatically
4693 #USB_BLACKLIST="1111:2222 3333:4444"
4694
4695 # Bluetooth devices are excluded from USB autosuspend:
4696 # 0=do not exclude, 1=exclude.
4697 USB_BLACKLIST_BTUSB=0
4698
4699 # Phone devices are excluded from USB autosuspend:
4700 # 0=do not exclude, 1=exclude (enable charging).
4701 USB_BLACKLIST_PHONE=0
4702
4703 # Printers are excluded from USB autosuspend:
4704 # 0=do not exclude, 1=exclude.
4705 USB_BLACKLIST_PRINTER=1
4706
4707 # WWAN devices are excluded from USB autosuspend:
4708 # 0=do not exclude, 1=exclude.
4709 USB_BLACKLIST_WWAN=1
4710
4711 # Include listed devices into USB autosuspend even if already excluded
4712 # by the blacklists above (separate with spaces).
4713 # Use lsusb to get the ids.
4714 #USB_WHITELIST="1111:2222 3333:4444"
4715
4716 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4717 # (workaround for USB devices that cause shutdown problems).
4718 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4719
4720 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4721 # on system startup: 0=disable, 1=enable.
4722 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4723 # are ignored when this is enabled!
4724 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4725 RESTORE_DEVICE_STATE_ON_STARTUP=1
4726
4727 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4728 # Separate multiple devices with spaces.
4729 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4730
4731 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4732 # Separate multiple devices with spaces.
4733 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4734
4735 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4736 # (workaround for devices that are blocking shutdown).
4737 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4738
4739 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4740 # (to prevent other operating systems from missing radios).
4741 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4742
4743 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4744 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4745
4746 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4747 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4748
4749 # Radio devices to disable on battery when not in use (not connected):
4750 # bluetooth, wifi, wwan.
4751 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4752
4753 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4754 # required). Charging starts when the remaining capacity falls below the
4755 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4756 # Main / Internal battery (values in %)
4757 #START_CHARGE_THRESH_BAT0=75
4758 #STOP_CHARGE_THRESH_BAT0=80
4759 # Ultrabay / Slice / Replaceable battery (values in %)
4760 #START_CHARGE_THRESH_BAT1=75
4761 #STOP_CHARGE_THRESH_BAT1=80
4762
4763 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4764 #RESTORE_THRESHOLDS_ON_BAT=1
4765
4766 # ------------------------------------------------------------------------------
4767 # tlp-rdw - Parameters for the radio device wizard
4768 # Possible devices: bluetooth, wifi, wwan.
4769
4770 # Hints:
4771 # - Parameters are disabled by default, remove the leading # to enable them
4772 # - Separate multiple radio devices with spaces
4773
4774 # Radio devices to disable on connect.
4775 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4776 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4777 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4778
4779 # Radio devices to enable on disconnect.
4780 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4781 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4782 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4783
4784 # Radio devices to enable/disable when docked.
4785 #DEVICES_TO_ENABLE_ON_DOCK=""
4786 #DEVICES_TO_DISABLE_ON_DOCK=""
4787
4788 # Radio devices to enable/disable when undocked.
4789 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4790 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4791 #+end_src
4792
4793 ** X
4794
4795 *** xprofile
4796 :PROPERTIES:
4797 :header-args+: :tangle ~/.xprofile
4798 :END:
4799
4800 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4801 contrary, it's automatically sourced by LightDM, my display manager of
4802 choice.
4803
4804 #+begin_src sh :tangle no
4805 xset -b # disable bell
4806 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4807
4808 # setxkbmap -option compose:ralt
4809
4810 setxkbmap -option ctrl:nocaps # turn capslock into control
4811 setxkbmap -option altwin:swap_alt_win # swap alt and super
4812
4813 if [ $(hostname) = "plasma" ]
4814 then
4815 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4816 fi
4817
4818 if [ $(hostname) = "enigma" ]
4819 then
4820 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4821 fi
4822
4823 light -Scrs "intel_backlight" 2
4824
4825 source $HOME/.zprofile
4826
4827 export _JAVA_AWT_WM_NONREPARENTING=1
4828 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4829
4830 if [ $(hostname) = "plasma" ]
4831 then
4832 unlock-def-gk.py &
4833 fi
4834
4835 bspwm &
4836 #+end_src
4837
4838 *** X resources
4839
4840 **** Xresources
4841 :PROPERTIES:
4842 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4843 :END:
4844
4845 #+begin_src conf-xdefaults
4846 #include ".Xresources.d/fonts"
4847 ! #include ".Xresources.d/colors"
4848 #include ".Xresources.d/emacs"
4849 #include ".Xresources.d/rxvt-unicode"
4850 #+end_src
4851
4852 **** Xresources.d
4853
4854 ***** fonts
4855 :PROPERTIES:
4856 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4857 :END:
4858
4859 #+begin_src conf-xdefaults
4860 Xft.lcdfilter: lcddefault
4861 Xft.antialias: true
4862 Xft.autohint: 0
4863 Xft.hinting: true
4864 Xft.hintstyle: hintslight
4865 ! Xft.hintstyle: hintfull
4866 Xft.rgba: rgb
4867 Xft.dpi: 96
4868 #+end_src
4869
4870 ***** colors
4871 :PROPERTIES:
4872 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4873 :END:
4874
4875 #+begin_src conf-xdefaults :tangle no
4876 #include "gruvbox-light.xresources"
4877 ! #include "gruvbox-dark.xresources"
4878 #include "gruvbox-urxvt256.xresources"
4879 #+end_src
4880
4881 #+begin_src conf-xdefaults :tangle no
4882 ! -----------------------------------------------------------------------------
4883 ! File: gruvbox-light.xresources
4884 ! Description: Retro groove colorscheme generalized
4885 ! Author: morhetz <morhetz@gmail.com>
4886 ! Source: https://github.com/morhetz/gruvbox-generalized
4887 ! Last Modified: 6 Sep 2014
4888 ! -----------------------------------------------------------------------------
4889
4890 ! hard contrast: *background: #f9f5d7
4891 *background: #fbf1c7
4892 ! soft contrast: *background: #f2e5bc
4893 *foreground: #3c3836
4894 ! Black + DarkGrey
4895 *color0: #fdf4c1
4896 *color8: #928374
4897 ! DarkRed + Red
4898 *color1: #cc241d
4899 *color9: #9d0006
4900 ! DarkGreen + Green
4901 *color2: #98971a
4902 *color10: #79740e
4903 ! DarkYellow + Yellow
4904 *color3: #d79921
4905 *color11: #b57614
4906 ! DarkBlue + Blue
4907 *color4: #458588
4908 *color12: #076678
4909 ! DarkMagenta + Magenta
4910 *color5: #b16286
4911 *color13: #8f3f71
4912 ! DarkCyan + Cyan
4913 *color6: #689d6a
4914 *color14: #427b58
4915 ! LightGrey + White
4916 *color7: #7c6f64
4917 *color15: #3c3836
4918 #+end_src
4919
4920 #+begin_src conf-xdefaults :tangle no
4921 ! -----------------------------------------------------------------------------
4922 ! File: gruvbox-dark.xresources
4923 ! Description: Retro groove colorscheme generalized
4924 ! Author: morhetz <morhetz@gmail.com>
4925 ! Source: https://github.com/morhetz/gruvbox-generalized
4926 ! Last Modified: 6 Sep 2014
4927 ! -----------------------------------------------------------------------------
4928
4929 ! hard contrast: *background: #1d2021
4930 *background: #282828
4931 ! soft contrast: *background: #32302f
4932 *foreground: #ebdbb2
4933 ! Black + DarkGrey
4934 *color0: #282828
4935 *color8: #928374
4936 ! DarkRed + Red
4937 *color1: #cc241d
4938 *color9: #fb4934
4939 ! DarkGreen + Green
4940 *color2: #98971a
4941 *color10: #b8bb26
4942 ! DarkYellow + Yellow
4943 *color3: #d79921
4944 *color11: #fabd2f
4945 ! DarkBlue + Blue
4946 *color4: #458588
4947 *color12: #83a598
4948 ! DarkMagenta + Magenta
4949 *color5: #b16286
4950 *color13: #d3869b
4951 ! DarkCyan + Cyan
4952 *color6: #689d6a
4953 *color14: #8ec07c
4954 ! LightGrey + White
4955 *color7: #a89984
4956 *color15: #ebdbb2
4957 #+end_src
4958
4959 #+begin_src conf-xdefaults :tangle no
4960 ! -----------------------------------------------------------------------------
4961 ! File: gruvbox-urxvt256.xresources
4962 ! Description: Retro groove colorscheme generalized
4963 ! Author: morhetz <morhetz@gmail.com>
4964 ! Source: https://github.com/morhetz/gruvbox-generalized
4965 ! Last Modified: 13 Dec 2013
4966 ! -----------------------------------------------------------------------------
4967
4968 URxvt.color24: #076678
4969 URxvt.color66: #427b58
4970 URxvt.color88: #9d0006
4971 URxvt.color96: #8f3f71
4972 URxvt.color100: #79740e
4973 URxvt.color108: #8ec07c
4974 URxvt.color109: #83a598
4975 URxvt.color130: #af3a03
4976 URxvt.color136: #b57614
4977 URxvt.color142: #b8bb26
4978 URxvt.color167: #fb4934
4979 URxvt.color175: #d3869b
4980 URxvt.color208: #fe8019
4981 URxvt.color214: #fabd2f
4982 URxvt.color223: #ebdbb2
4983 URxvt.color228: #f2e5bc
4984 URxvt.color229: #fbf1c7
4985 URxvt.color230: #f9f5d7
4986 URxvt.color234: #1d2021
4987 URxvt.color235: #282828
4988 URxvt.color236: #32302f
4989 URxvt.color237: #3c3836
4990 URxvt.color239: #504945
4991 URxvt.color241: #665c54
4992 URxvt.color243: #7c6f64
4993 URxvt.color244: #928374
4994 URxvt.color245: #928374
4995 URxvt.color246: #a89984
4996 URxvt.color248: #bdae93
4997 URxvt.color250: #d5c4a1
4998 #+end_src
4999
5000 ***** emacs
5001 :PROPERTIES:
5002 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
5003 :END:
5004
5005 #+begin_src conf-xdefaults
5006 Emacs.menuBar: off
5007 Emacs.toolBar: off
5008 Emacs.verticalScrollBars: off
5009 Emacs.cursorBlink: off
5010 Emacs.FontBackend: xft,x
5011 ! Emacs.font: Ubuntu Mono-12
5012 ! Emacs.font: Triplicate T4C-11
5013 ! Emacs.font: Ubuntu Mono-10.5
5014 ! Emacs.font: Ubuntu Mono-12
5015 ! Emacs.font: Iosevka-11
5016
5017 ! Emacs.font: Fira Mono:size=15
5018 ! Emacs.font: DejaVu Sans Mono:size=15
5019 ! Emacs.font: Inconsolata:size=17
5020 ! Emacs.font: Inconsolata:size=16
5021 ! Emacs.font: Inconsolata LGC:size=14
5022 ! Emacs.font: Source Code Pro Medium-10.5
5023 Emacs.font: Source Code Pro:size=14
5024 ! Emacs.font: Ubuntu Mono:size=16
5025 ! Emacs.font: Iosevka:size=16
5026 #+end_src
5027
5028 ***** rxvt-unicode
5029 :PROPERTIES:
5030 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
5031 :END:
5032
5033 #+begin_src conf-xdefaults
5034 ! Font
5035 URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
5036 URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
5037 URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
5038 URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
5039
5040 URxvt.xftAntialias: true
5041 URxvt.letterSpace: 0
5042
5043 URxvt.depth: 0
5044 URxvt.loginShell: true
5045 URxvt.saveLines: 100000
5046 URxvt.internalBorder: 3
5047 URxvt.lineSpace: 0
5048 URxvt.scrollBar: false
5049 URxvt.scrollStyle: rxvt
5050 URxvt*scrollTtyOutput: false
5051 URxvt*scrollWithBuffer: true
5052 URxvt*scrollTtyKeypress: true
5053 URxvt.keysym.Shift-Up: command:\033]720;1\007
5054 URxvt.keysym.Shift-Down: command:\033]721;1\007
5055
5056 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
5057 URxvt.url-select.launcher: firefox
5058 URxvt.url-select.underline: true
5059 URxvt.keysym.M-u: perl:url-select:select_next
5060 URxvt.keysym.M-Escape: perl:keyboard-select:activate
5061 URxvt.keysym.M-s: perl:keyboard-select:search
5062 URxvt.url-launcher: /usr/bin/firefox
5063 URxvt.matcher.button: 1
5064 URxvt.iso14755: false
5065 URxvt.iso14755_53: false
5066 URxvt.keysym.M-c: perl:clipboard:copy
5067 URxvt.keysym.M-v: perl:clipboard:paste
5068 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
5069 URxvt.keysym.C-Up: font-size:increase
5070 URxvt.keysym.C-Down: font-size:decrease
5071 URxvt.keysym.C-S-Up: font-size:incglobal
5072 URxvt.keysym.C-S-Down: font-size:decglobal
5073 URxvt.keysym.C-equal: font-size:reset
5074 !URxvt.keysym.C-question: font-size:show
5075
5076 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5077
5078 !urxvt*foreground: white
5079 !urxvt*background: black
5080
5081 !*color0: #2E3436
5082 !*color1: #a40000
5083 !*color2: #4E9A06
5084 !*color3: #C4A000
5085 !*color4: #3465A4
5086 !*color5: #75507B
5087 !*color6: #ce5c00
5088 !*color7: #babdb9
5089 !*color8: #555753
5090 !*color9: #EF2929
5091 !*color10: #8AE234
5092 !*color11: #FCE94F
5093 !*color12: #729FCF
5094 !*color13: #AD7FA8
5095 !*color14: #fcaf3e
5096 !*color15: #EEEEEC
5097
5098 !URxvt.foreground: #C8C8C8
5099 !URxvt.background: #FFFFFF
5100
5101 !! black
5102 !*color0: #2E3436
5103 !*color8: #555753
5104 !! red
5105 !*color1: #a40000
5106 !*color9: #EF2929
5107 !! green
5108 !*color2: #4E9A06
5109 !*color10: #8AE234
5110 !! yellow
5111 !*color3: #C4A000
5112 !*color11: #FCE94F
5113 !! blue
5114 !*color4: #3465A4
5115 !*color12: #729FCF
5116 !! purple
5117 !*color5: #75507B
5118 !*color13: #AD7FA8
5119 !! orange (replaces cyan)
5120 !*color6: #ce5c00
5121 !*color14: #fcaf3e
5122 !! white
5123 !*color7: #babdb9
5124 !*color15: #EEEEEC
5125
5126 ! Tango colour theme for rxvt-unicode
5127 URxvt.background: #FFFFFF
5128 URxvt.foreground: #000000
5129
5130 ! Black
5131 URxvt.color0: #2E3436
5132 URxvt.color8: #757773
5133
5134 ! Red
5135 URxvt.color1: #CC0000
5136 URxvt.color9: #EF2929
5137
5138 ! Green
5139 URxvt.color2: #4E9A06
5140 URxvt.color10: #8AE234
5141
5142 ! Yellow
5143 URxvt.color3: #C4A000
5144 URxvt.color11: #FCE94F
5145
5146 ! Blue
5147 URxvt.color4: #3465A4
5148 URxvt.color12: #729FCF
5149
5150 ! Magenta
5151 URxvt.color5: #75507B
5152 URxvt.color13: #AD7FA8
5153
5154 !! Cyan
5155 !URxvt.color6: #06989A
5156 !URxvt.color14: #34E2E2
5157 ! orange (replaces cyan)
5158 ,*color6: #ce5c00
5159 ,*color14: #fcaf3e
5160
5161 ! White
5162 URxvt.color7: #D3D7CF
5163 URxvt.color15: #EEEEEC
5164 #+end_src
5165
5166 *** xkb us_ab keyboard layout
5167
5168 #+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5169 default partial alphanumeric_keys
5170 xkb_symbols "us_ab" {
5171 include "us(basic)"
5172 name[Group1]= "English (US)(aminb)";
5173
5174 key <MENU> { [ Alt_R ] };
5175 };
5176 #+end_src
5177
5178 ** XDG
5179 :PROPERTIES:
5180 :header-args+: :tangle ~/.config/user-dirs.dirs
5181 :END:
5182
5183 #+begin_src conf
5184 XDG_DESKTOP_DIR="$HOME/Desktop"
5185 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5186 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5187 XDG_MUSIC_DIR="$HOME/usr/music"
5188 XDG_PICTURES_DIR="$HOME/usr/pics"
5189 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5190 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5191 XDG_VIDEOS_DIR="$HOME/usr/vids"
5192 #+end_src
5193
5194 ** Zathura
5195 :PROPERTIES:
5196 :header-args+: :tangle ~/.config/zathura/zathurarc
5197 :END:
5198
5199 #+begin_src conf
5200 set smooth-scroll true
5201 set selection-clipboard clipboard
5202 set zoom-step 05
5203 set default-bg "#272727"
5204 set statusbar-bg "#272727"
5205 set inputbar-bg "#373737"
5206 #+end_src
5207
5208 ** Zsh
5209
5210 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5211 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5212 installed.
5213
5214 *** zimrc
5215 :PROPERTIES:
5216 :header-args+: :tangle ~/.zimrc
5217 :END:
5218
5219 #+begin_src sh
5220
5221
5222 #################
5223 # CORE SETTINGS #
5224 #################
5225
5226 #
5227 # Zim settings
5228 #
5229
5230 # Select what modules you would like enabled.
5231 # The second line of modules may depend on options set by modules in the first
5232 # line. These dependencies are noted on the respective module's README.md.
5233 zmodules=(directory environment git git-info history input ssh utility custom \
5234 syntax-highlighting history-substring-search prompt completion)
5235
5236
5237 ###################
5238 # MODULE SETTINGS #
5239 ###################
5240
5241 #
5242 # Prompt
5243 #
5244
5245 # Set your desired prompt here
5246 zprompt_theme='pure'
5247 #PURE_PROMPT_SYMBOL=λ
5248 #PURE_PROMPT_SYMBOL=δ
5249 PURE_PROMPT_SYMBOL=➜
5250
5251 #
5252 # Completion
5253 #
5254
5255 # set an optional host-specific filename for the completion cache file
5256 # if none is provided, the default '.zcompdump' is used.
5257 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5258
5259 #
5260 # Utility
5261 #
5262
5263 # Uncomment to enable command correction prompts
5264 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5265 setopt CORRECT
5266
5267 #
5268 # Environment
5269 #
5270
5271 # Set the string below to the desired terminal title format string.
5272 # The terminal title is redrawn upon directory change, however, variables like
5273 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5274 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5275 # The example below uses the following format: 'username@host:/current/directory'
5276 ztermtitle='%n@%m:%~'
5277
5278 #
5279 # Input
5280 #
5281
5282 # Uncomment to enable double-dot expansion.
5283 # This appends '../' to your input for each '.' you type after an initial '..'
5284 #zdouble_dot_expand='true'
5285
5286 #
5287 # Syntax-Highlighting
5288 #
5289
5290 # This determines what highlighters will be used with the syntax-highlighting module.
5291 # Documentation of the highlighters can be found here:
5292 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5293 # For (u)rxvt, termite and gnome-terminal users,
5294 # removing the 'cursor' highlighter will fix the disappearing cursor problem
5295 #zhighlighters=(main brackets cursor)
5296 zhighlighters=(main brackets pattern)
5297
5298
5299 #
5300 # SSH
5301 #
5302
5303 # Load these ssh identities with the ssh module
5304 zssh_ids=(id_ed25519_bandali)
5305
5306
5307 #
5308 # Pacman
5309 #
5310
5311 # Set (optional) pacman front-end.
5312 zpacman_frontend='yay'
5313
5314 # Load any helper scripts as defined here
5315 #zpacman_helper=(aur)
5316 #+end_src
5317
5318 *** zlogin
5319 :PROPERTIES:
5320 :header-args+: :tangle ~/.zlogin
5321 :END:
5322
5323 #+begin_src sh
5324
5325
5326 #
5327 # User configuration sourced by login shells
5328 #
5329
5330 # Initialize zim
5331 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5332 #+end_src
5333
5334 *** zprofile
5335 :PROPERTIES:
5336 :header-args+: :tangle ~/.zprofile
5337 :END:
5338
5339 #+begin_src sh
5340 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5341 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
5342 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
5343 export XDG_CONFIG_HOME=$HOME/.config
5344 export XDG_DATA_HOME=$HOME/.local/share
5345 export XDG_DATA_DIRS=/usr/local/share:/usr/share
5346 export MAILDIR="$HOME/mail"
5347 export CVS_RSH=ssh
5348 #export MATHMODELS=$HOME/src/eiffel/mathmodels
5349 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5350 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5351
5352 # Eiffel2Java stuff
5353 #export JAVA_HOME=/usr/lib/jvm/default
5354 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5355 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5356 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5357
5358 #export PATH="$HOME/usr/build/pvs:$PATH"
5359 #export SBCLISP_HOME=/usr/share/sbcl-source
5360 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5361
5362 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
5363
5364 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5365 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5366
5367 export NIXPKGS=$HOME/src/git/nixpkgs
5368
5369 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
5370 #+end_src
5371
5372 *** zshenv
5373 :PROPERTIES:
5374 :header-args+: :tangle ~/.zshenv
5375 :END:
5376
5377 #+begin_src sh
5378 # Ensure that a non-login, non-interactive shell has a defined environment.
5379 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5380 source "${ZDOTDIR:-$HOME}/.zprofile"
5381 fi
5382 #+end_src
5383
5384 *** zshrc
5385 :PROPERTIES:
5386 :header-args+: :tangle ~/.zshrc
5387 :END:
5388
5389 #+begin_src sh
5390 # Bash-like navigation
5391 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5392 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5393 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5394 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
5395
5396 #disable -r time # disable shell reserved word
5397 #alias time='time -p' # -p for POSIX output
5398
5399 # rehash if last command was pacaur or pacman
5400 # (so that zsh picks up changes in $PATH immediately)
5401 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5402
5403 #
5404 # User configuration sourced by interactive shells
5405 #
5406
5407 # Change default zim location
5408 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5409
5410 # Start zim
5411 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5412
5413 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5414 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5415
5416 setopt globdots
5417
5418 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
5419 # source ~/.zsh/zsh-autopair/autopair.zsh
5420
5421
5422 ### fzf ###
5423
5424 source /usr/share/fzf/key-bindings.zsh
5425 source /usr/share/fzf/completion.zsh
5426
5427 # Accept history selection instead of putting it on
5428 # the command line
5429 fzf-history-widget-accept() {
5430 fzf-history-widget
5431 zle accept-line
5432 }
5433 #zle -N fzf-history-widget-accept
5434 #bindkey '^R' fzf-history-widget-accept
5435
5436 # alt+c preview
5437 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5438
5439 ### fzf ###
5440
5441
5442 # aliases
5443 alias mpv="mpv --ytdl-format mp4"
5444 alias mv="mv -iv"
5445 alias cp="cp -iv"
5446 alias scl=systemctl
5447 alias jcl=journalctl
5448 alias m="mbsync uwaterloo; mbsync amin"
5449 alias best="youtube-dl -f best"
5450 alias sd="ssh deb"
5451 alias sf="ssh fp"
5452 alias sn="ssh nix"
5453
5454 aur() {
5455 cd ~/usr/build
5456 git clone https://aur.archlinux.org/${1}.git
5457 cd ${1}
5458 }
5459
5460 # i-beam cursor
5461 echo -e "\033[5 q"
5462 #echo -e "\033[6 q"
5463 #+end_src
5464
5465 * Scripts
5466
5467 This section contains various useful scripts and the ones used by the
5468 programs above. For instance, =toggle-tablet= for switching to and
5469 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5470 Xfce's presentation mode which keeps the screen awake, and
5471 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5472 exact brightness value.
5473
5474 ** battery-percentage-time
5475 :PROPERTIES:
5476 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
5477 :END:
5478
5479 #+begin_src sh :tangle no
5480 dbus_send() {
5481 label=$1
5482 dbus-send --print-reply=literal --system \
5483 --dest=org.freedesktop.UPower \
5484 /org/freedesktop/UPower/devices/battery_BAT0 \
5485 org.freedesktop.DBus.Properties.Get \
5486 string:org.freedesktop.UPower.Device \
5487 string:"${label}" | awk '{print $3}'
5488 }
5489
5490 perc=$(dbus_send 'Percentage')
5491 state=$(dbus_send 'State')
5492
5493 if [ "$state" -eq 2 ]; then # Discharging
5494 secs=$(dbus_send 'TimeToEmpty')
5495 elif [ "$state" -eq 1 ]; then # Charging
5496 secs=$(dbus_send 'TimeToFull')
5497 fi
5498
5499 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5500 #+end_src
5501
5502 ** my-i3status.py
5503 :PROPERTIES:
5504 :header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
5505 :END:
5506
5507 #+begin_src python :comments none
5508 # -*- coding: utf-8 -*-
5509
5510 # This script is a simple wrapper which prefixes each i3status line with custom
5511 # information. It is based on:
5512 # https://github.com/i3/i3status/blob/master/contrib/wrapper.py
5513 #
5514 # In ~/.i3status.conf, add the following line:
5515 # output_format = "i3bar"
5516 # in the 'general' section.
5517 # Then, in ~/.config/i3/config or ~/.config/sway/config add:
5518 # status_command i3status | my-i3status.py
5519 # in the 'bar' section. Make sure my-i3status.py is in $PATH.
5520 #
5521 # © 2012 Valentin Haenel <valentin.haenel@gmx.de>
5522 # © 2018 Amin Bandali <bandali@gnu.org>
5523 #
5524 # This program is free software. It comes without any warranty, to the extent
5525 # permitted by applicable law. You can redistribute it and/or modify it under
5526 # the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
5527 # 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
5528 # details.
5529
5530 import sys
5531 import json
5532 import os
5533
5534 def get_nosleep():
5535 """ Return true if ~/.nosleep exists. """
5536 return os.path.isfile(os.path.expanduser("~/.nosleep"))
5537
5538 def print_line(message):
5539 """ Non-buffered printing to stdout. """
5540 sys.stdout.write(message + '\n')
5541 sys.stdout.flush()
5542
5543 def read_line():
5544 """ Interrupted respecting reader for stdin. """
5545 # try reading a line, removing any extra whitespace
5546 try:
5547 line = sys.stdin.readline().strip()
5548 # i3status sends EOF, or an empty line
5549 if not line:
5550 sys.exit(3)
5551 return line
5552 # exit on ctrl-c
5553 except KeyboardInterrupt:
5554 sys.exit()
5555
5556 if __name__ == '__main__':
5557 # Skip the first line which contains the version header.
5558 print_line(read_line())
5559
5560 # The second line contains the start of the infinite array.
5561 print_line(read_line())
5562
5563 while True:
5564 line, prefix = read_line(), ''
5565 # ignore comma at start of lines
5566 if line.startswith(','):
5567 line, prefix = line[1:], ','
5568
5569 if get_nosleep():
5570 j = json.loads(line)
5571 # insert information into the start of the json, but could be anywhere
5572 j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
5573 # and echo back new encoded json
5574 print_line(prefix+json.dumps(j))
5575 else:
5576 print_line(prefix+line)
5577 #+end_src
5578
5579 ** rofi-light
5580 :PROPERTIES:
5581 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5582 :END:
5583
5584 #+begin_src bash
5585 cur=$(light -G)
5586 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
5587 [ -n "$val" ] && light -S $val
5588 #+end_src
5589
5590 ** rofi-remmina.py
5591 :PROPERTIES:
5592 :header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
5593 :END:
5594
5595 #+begin_src python
5596 import ConfigParser
5597 import os
5598 from subprocess import Popen, PIPE
5599
5600 remmina_dir = os.path.expanduser("~/.local/share/remmina")
5601
5602 fdict = dict()
5603
5604 for f in os.listdir(remmina_dir):
5605 fp = os.path.join(remmina_dir, f)
5606 c = ConfigParser.ConfigParser()
5607 c.read(fp)
5608 n = c.get('remmina', 'name')
5609 fdict[n] = fp
5610
5611 lines = max(min(15, len(fdict)), 1);
5612 width = len(max(fdict.keys(), key=len))
5613 rofi = Popen(["rofi", "-i", "-dmenu", \
5614 "-l", str(lines), "-width", str(width), \
5615 "-p", "connection"], stdout=PIPE, stdin=PIPE)
5616 selected = rofi.communicate("\n" \
5617 .join(fdict.keys()) \
5618 .encode("utf-8"))[0] \
5619 .decode("utf-8") \
5620 .strip()
5621 rofi.wait()
5622
5623 r = Popen(["remmina", "-c", fdict[selected]])
5624 r.wait()
5625 #+end_src
5626
5627 ** s (run sway)
5628 :PROPERTIES:
5629 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5630 :END:
5631
5632 #+begin_src bash
5633 export _JAVA_AWT_WM_NONREPARENTING=1
5634 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5635 light -Nr 2
5636 source $HOME/.zprofile
5637 sway
5638 #+end_src
5639
5640 ** sway-ws-util
5641 :PROPERTIES:
5642 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5643 :END:
5644
5645 #+begin_src bash
5646 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5647 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5648 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5649 dest_ws=-1
5650 op=-1
5651
5652 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5653 op="$1"
5654 if [ "$2" = "prev" ]; then
5655 dest_ws="$prev_ws"
5656 elif [ "$2" = "next" ]; then
5657 dest_ws="$next_ws"
5658 else
5659 echo "Usage: $0 $1 {prev|next} [follow]"
5660 exit 1
5661 fi
5662 else
5663 echo "Usage: $0 {switch|move} {prev|next} [follow]"
5664 exit 1
5665 fi
5666
5667 if [ "$op" = "switch" ]; then
5668 sway workspace "$dest_ws"
5669 elif [ "$op" = "move" ]; then
5670 sway move container to workspace "$dest_ws"
5671 if [ "$3" = "follow" ]; then
5672 sway workspace "$dest_ws"
5673 fi
5674 fi
5675 #+end_src
5676
5677 ** toggle-layout
5678 :PROPERTIES:
5679 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5680 :END:
5681
5682 #+begin_src bash :tangle no
5683 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5684
5685 if [ "$lang" = "us" ]; then
5686 setxkbmap ir
5687 else
5688 setxkbmap us
5689 # xmodmap $HOME/.Xmodmap
5690 fi
5691 #+end_src
5692
5693 ** toggle-presentation-mode
5694 :PROPERTIES:
5695 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5696 :END:
5697
5698 #+begin_src bash :tangle no
5699 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5700 #+end_src
5701
5702 ** toggle-tablet
5703 :PROPERTIES:
5704 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5705 :END:
5706
5707 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5708 a few things:
5709
5710 - rotates the screen using =xrandr=, so that rotating the physical
5711 display of my X220t would have the laptop's battery on the right
5712 hand side,
5713 - enables touch screen,
5714 - properly rotates the stylus pen and touch screen pointers, and
5715 - toggles between RGB and Vertical BGR sub-pixel order.
5716
5717 #+begin_src bash :tangle no
5718 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5719 0) # Screen is not rotated, we should rotate it right (90°)
5720 xrandr -o 3
5721 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5722 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5723 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5724 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5725 ;;
5726 1) # Currently top is rotated right, we should set it normal (0°)
5727 xrandr -o 0
5728 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5729 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5730 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5731 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5732 ;;
5733 *)
5734 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5735 exit 1
5736 ;;
5737 esac
5738 #+end_src
5739
5740 ** unlock-def-gk.py
5741 :PROPERTIES:
5742 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5743 :END:
5744
5745 #+begin_src python :tangle no
5746 import gnomekeyring as gk
5747 # list_item_ids_sync('login')[0] == 1L
5748 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5749 #+end_src
5750
5751 ** volume-info
5752 :PROPERTIES:
5753 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5754 :END:
5755
5756 #+begin_src sh :tangle no
5757 cur_vol=$(pamixer --get-volume)
5758
5759 if [ $(pamixer --get-mute) = true ]; then
5760 printf 'mt \n' "$cur_vol"
5761 else
5762 printf '%02d \n' "$cur_vol"
5763 fi
5764 #+end_src
5765
5766 ** wp
5767
5768 My little wallpaper changer script.
5769
5770 *** wp
5771 :PROPERTIES:
5772 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5773 :END:
5774
5775 #+begin_src bash :tangle no
5776 export DISPLAY=:0
5777
5778 case "$1" in
5779 "day")
5780 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5781 ;;
5782 "night")
5783 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5784 ;;
5785 *)
5786 echo $"Usage: $0 {day|night}"
5787 exit 1
5788 esac
5789 #+end_src
5790
5791 *** wp-auto
5792 :PROPERTIES:
5793 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5794 :END:
5795
5796 #+begin_src bash :tangle no
5797 SED=$(which sed)
5798 ROFI=$(which rofi)
5799
5800 export DISPLAY=:0
5801 HOUR=$(date +%H)
5802
5803 if [ -z "${SED}" ]
5804 then
5805 echo "Did not find 'sed', script cannot continue."
5806 exit 1
5807 fi
5808 if [ -z "${ROFI}" ]
5809 then
5810 echo "Did not find rofi, there is no point to continue."
5811 exit 1
5812 fi
5813
5814 ###
5815 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5816 # Repeated calls should leave the config clean-ish
5817 ###
5818 function set_theme()
5819 {
5820 CDIR="${HOME}/.config/rofi/"
5821 if [ ! -d "${CDIR}" ]
5822 then
5823 mkdir -p ${CDIR}
5824 fi
5825 if [ -f "${CDIR}/config" ]
5826 then
5827 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5828 fi
5829 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5830
5831 }
5832
5833 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5834 then
5835 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5836 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5837 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5838 else
5839 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5840 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5841 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5842 fi
5843 #+end_src
5844
5845 *** wp.service
5846 :PROPERTIES:
5847 :header-args+: :tangle ~/.config/systemd/user/wp.service
5848 :END:
5849
5850 #+begin_src conf :tangle no
5851 [Unit]
5852 Description=wallpaper service
5853
5854 [Service]
5855 Type=oneshot
5856 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5857 #+end_src
5858
5859 *** wp.timer
5860 :PROPERTIES:
5861 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5862 :END:
5863
5864 #+begin_src conf :tangle no
5865 [Unit]
5866 [Unit]
5867 Description=wallpaper timer
5868
5869 [Timer]
5870 OnCalendar=07,21:00
5871 Unit=wp.service
5872 Persistent=true
5873
5874 [Install]
5875 WantedBy=timers.target
5876 #+end_src
5877
5878 ** zathura-sync.sh
5879 :PROPERTIES:
5880 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5881 :END:
5882
5883 #+begin_src sh
5884 pos="$1"
5885 pdffile="$2"
5886 zathura --synctex-forward "$pos" "$pdffile" || \
5887 (
5888 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5889 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5890 #+end_src
5891 ** Fun :)
5892
5893 *** eat-em
5894 :PROPERTIES:
5895 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5896 :END:
5897
5898 #+begin_src sh
5899 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5900 # [ESC] character in original post removed here.
5901
5902 # ANSI Color -- use these variables to easily have different color
5903 # and format output. Make sure to output the reset sequence after
5904 # colors (f = foreground, b = background), and use the 'off'
5905 # feature for anything you turn on.
5906
5907 initializeANSI()
5908 {
5909 esc="$(echo -en '\e')"
5910
5911 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5912 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5913 cyanf="${esc}[36m"; whitef="${esc}[37m"
5914
5915 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5916 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5917 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5918
5919 boldon="${esc}[1m"; boldoff="${esc}[22m"
5920 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5921 ulon="${esc}[4m"; uloff="${esc}[24m"
5922 invon="${esc}[7m"; invoff="${esc}[27m"
5923
5924 reset="${esc}[0m"
5925 }
5926
5927 # note in this first use that switching colors doesn't require a reset
5928 # first - the new color overrides the old one.
5929
5930 #clear
5931
5932 initializeANSI
5933
5934 cat << EOF
5935
5936 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5937 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5938 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5939 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5940 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5941 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5942
5943 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5944 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5945 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5946 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5947 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5948 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5949
5950 EOF
5951 #+end_src
5952
5953 *** invade-em
5954 :PROPERTIES:
5955 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5956 :END:
5957
5958 #+begin_src bash
5959 #
5960 # ANSI color scheme script featuring Space Invaders
5961 #
5962 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5963 # Modified by lolilolicon
5964 #
5965
5966 f=3 b=4
5967 for j in f b; do
5968 for i in {0..7}; do
5969 printf -v $j$i %b "\e[${!j}${i}m"
5970 done
5971 done
5972 bld=$'\e[1m'
5973 rst=$'\e[0m'
5974
5975 cat << EOF
5976
5977 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5978 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5979 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5980 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5981
5982 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5983 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5984 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5985 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5986
5987
5988 $f7▌$rst
5989
5990 $f7▌$rst
5991
5992 $f7 ▄█▄ $rst
5993 $f7▄█████████▄$rst
5994 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5995
5996 EOF
5997 #+end_src