git.shemshak.org - ~bandali/configs/blob - spacemacs/.spacemacs

   1 ;; -*- mode: dotspacemacs -*-
   2 ;; This file is loaded by Spacemacs at startup.
   3 ;; It must be stored in your home directory.
   4
   5 (defun dotspacemacs/layers ()
   6   "Configuration Layers declaration."
   7   (setq-default
   8    ;; List of additional paths where to look for configuration layers.
   9    ;; Paths must have a trailing slash (ie. `~/.mycontribs/')
  10    dotspacemacs-configuration-layer-path '()
  11    ;; List of configuration layers to load. If it is the symbol `all' instead
  12    ;; of a list then all discovered layers will be installed.
  13    dotspacemacs-configuration-layers
  14    '(
  15      ;; --------------------------------------------------------
  16      ;; Example of useful layers you may want to use right away
  17      ;; Uncomment a layer name and press C-c C-c to install it
  18      ;; --------------------------------------------------------
  19      auto-completion
  20      better-defaults
  21      (git :variables
  22           git-gutter-use-fringe t)
  23      markdown
  24      org
  25      syntax-checking
  26      mu4e
  27      evil
  28      c-c++
  29      auctex
  30      html
  31      clojure
  32      (haskell :variables '(haskell-enable-hindent-style "chris-done"
  33                                                         haskell-enable-shm-support t))
  34      emacs-lisp
  35      rust
  36      themes-megapack
  37      )
  38    ;; A list of packages and/or extensions that will not be install and loaded.
  39    dotspacemacs-excluded-packages '()
  40    ;; If non-nil spacemacs will delete any orphan packages, i.e. packages that
  41    ;; are declared in a layer which is not a member of
  42    ;; the list `dotspacemacs-configuration-layers'
  43    dotspacemacs-delete-orphan-packages t))
  44
  45 (defun dotspacemacs/init ()
  46   "Initialization function.
  47 This function is called at the very startup of Spacemacs initialization
  48 before layers configuration."
  49   ;; This setq-default sexp is an exhaustive list of all the supported
  50   ;; spacemacs settings.
  51   (setq-default
  52    ;; Either `vim' or `emacs'. Evil is always enabled but if the variable
  53    ;; is `emacs' then the `holy-mode' is enabled at startup.
  54    dotspacemacs-editing-style 'vim
  55    ;; If non nil output loading progess in `*Messages*' buffer.
  56    dotspacemacs-verbose-loading nil
  57    ;; Specify the startup banner. Default value is `official', it displays
  58    ;; the official spacemacs logo. An integer value is the index of text
  59    ;; banner, `random' chooses a random text banner in `core/banners'
  60    ;; directory. A string value must be a path to a .PNG file.
  61    ;; If the value is nil then no banner is displayed.
  62    ;; dotspacemacs-startup-banner 'official
  63    dotspacemacs-startup-banner 'official
  64    ;; t if you always want to see the changelog at startup
  65    dotspacemacs-always-show-changelog nil
  66    ;; List of items to show in the startup buffer. If nil it is disabled.
  67    ;; Possible values are: `recents' `bookmarks' `projects'."
  68    dotspacemacs-startup-lists '(recents projects)
  69    ;; List of themes, the first of the list is loaded when spacemacs starts.
  70    ;; Press <SPC> T n to cycle to the next theme in the list (works great
  71    ;; with 2 themes variants, one dark and one light)
  72    ;; dotspacemacs-themes '(leuven sanityinc-tomorrow-night solarized-dark solarized-light)
  73    dotspacemacs-themes '(gotham)
  74    ;; If non nil the cursor color matches the state color.
  75    dotspacemacs-colorize-cursor-according-to-state t
  76    ;; Default font. `powerline-scale' allows to quickly tweak the mode-line
  77    ;; size to make separators look not too crappy.
  78    dotspacemacs-default-font '("Source Code Pro"
  79                                :size 14
  80                                :weight normal
  81                                :width normal
  82                                :powerline-scale 1.1)
  83    ;; The leader key
  84    dotspacemacs-leader-key "SPC"
  85    ;; The leader key accessible in `emacs state' and `insert state'
  86    dotspacemacs-emacs-leader-key "M-m"
  87    ;; Major mode leader key is a shortcut key which is the equivalent of
  88    ;; pressing `<leader> m`. Set it to `nil` to disable it.
  89    dotspacemacs-major-mode-leader-key ","
  90    ;; Major mode leader key accessible in `emacs state' and `insert state'
  91    dotspacemacs-major-mode-emacs-leader-key "C-M-m"
  92    ;; The command key used for Evil commands (ex-commands) and
  93    ;; Emacs commands (M-x).
  94    ;; By default the command key is `:' so ex-commands are executed like in Vim
  95    ;; with `:' and Emacs commands are executed with `<leader> :'.
  96    dotspacemacs-command-key ":"
  97    ;; If non nil the paste micro-state is enabled. While enabled pressing `p`
  98    ;; several times cycle between the kill ring content.
  99    dotspacemacs-enable-paste-micro-state t
 100    ;; Guide-key delay in seconds. The Guide-key is the popup buffer listing
 101    ;; the commands bound to the current keystrokes.
 102    dotspacemacs-guide-key-delay 0.4
 103    ;; If non nil a progress bar is displayed when spacemacs is loading. This
 104    ;; may increase the boot time on some systems and emacs builds, set it to
 105    ;; nil ;; to boost the loading time.
 106    dotspacemacs-loading-progress-bar t
 107    ;; If non nil the frame is fullscreen when Emacs starts up.
 108    ;; (Emacs 24.4+ only)
 109    dotspacemacs-fullscreen-at-startup nil
 110    ;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
 111    ;; Use to disable fullscreen animations in OSX."
 112    dotspacemacs-fullscreen-use-non-native nil
 113    ;; If non nil the frame is maximized when Emacs starts up.
 114    ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
 115    ;; (Emacs 24.4+ only)
 116    dotspacemacs-maximized-at-startup nil
 117    ;; A value from the range (0..100), in increasing opacity, which describes
 118    ;; the transparency level of a frame when it's active or selected.
 119    ;; Transparency can be toggled through `toggle-transparency'.
 120    dotspacemacs-active-transparency 90
 121    ;; A value from the range (0..100), in increasing opacity, which describes
 122    ;; the transparency level of a frame when it's inactive or deselected.
 123    ;; Transparency can be toggled through `toggle-transparency'.
 124    dotspacemacs-inactive-transparency 90
 125    ;; If non nil unicode symbols are displayed in the mode line.
 126    dotspacemacs-mode-line-unicode-symbols t
 127    ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth
 128    ;; scrolling overrides the default behavior of Emacs which recenters the
 129    ;; point when it reaches the top or bottom of the screen.
 130    dotspacemacs-smooth-scrolling t
 131    ;; If non-nil smartparens-strict-mode will be enabled in programming modes.
 132    dotspacemacs-smartparens-strict-mode nil
 133    ;; If non nil advises quit functions to keep server open when quitting.
 134    dotspacemacs-persistent-server nil
 135    ;; The default package repository used if no explicit repository has been
 136    ;; specified with an installed package.
 137    ;; Not used for now.
 138    dotspacemacs-default-package-repository nil
 139    ;; Disable setting the cursor color according to states
 140    dotspacemacs-colorize-cursor-according-to-state nil
 141    )
 142   ;; User initialization goes here
 143   )
 144
 145 (defun dotspacemacs/config ()
 146   "Configuration function.
 147  This function is called at the very end of Spacemacs initialization after
 148 layers configuration."
 149   (setq powerline-default-separator nil)
 150   (setq TeX-PDF-mode t
 151         Tex-command-default 'TeX)
 152   (setq undo-tree-auto-save-history t
 153         undo-tree-history-directory-alist
 154         `(("." . ,(concat spacemacs-cache-directory "undo"))))
 155   (unless (file-exists-p (concat spacemacs-cache-directory "undo"))
 156     (make-directory (concat spacemacs-cache-directory "undo")))
 157
 158   (setq TeX-view-program-selection
 159         '(((output-dvi style-pstricks)
 160            "dvips and gv")
 161           (output-dvi "xdvi")
 162           (output-pdf "zathura")
 163           (output-html "xdg-open")))
 164
 165   (setq TeX-view-program-list
 166         '(("zathura"
 167            ("zathura" (mode-io-correlate "-sync.sh")
 168             " "
 169             (mode-io-correlate "%n:1:%t ")
 170             "%o"))))
 171
 172   (advice-add #'magit-key-mode-popup-committing :after
 173               (lambda ()
 174                 (magit-key-mode-toggle-option (quote committing) "--verbose")))
 175 )
 176
 177 ;; Do not write anything past this comment. This is where Emacs will
 178 ;; auto-generate custom variable definitions.
 179
 180
 181 (custom-set-variables
 182  ;; custom-set-variables was added by Custom.
 183  ;; If you edit it by hand, you could mess it up, so be careful.
 184  ;; Your init file should contain only one such instance.
 185  ;; If there is more than one, they won't work right.
 186  '(ac-ispell-requires 4)
 187  '(ahs-case-fold-search nil)
 188  '(ahs-default-range (quote ahs-range-whole-buffer))
 189  '(ahs-idle-interval 0.25)
 190  '(ahs-idle-timer 0 t)
 191  '(ahs-inhibit-face-list nil)
 192  '(ring-bell-function (quote ignore) t)
 193  '(send-mail-function (quote smtpmail-send-it)))
 194 (custom-set-faces
 195  ;; custom-set-faces was added by Custom.
 196  ;; If you edit it by hand, you could mess it up, so be careful.
 197  ;; Your init file should contain only one such instance.
 198  ;; If there is more than one, they won't work right.
 199  )