[emacs] update 6 drones
[~bandali/configs] / rc.org
1 #+title: rc.org
2 #+property: header-args :comments link :mkdirp yes :results silent
3
4 * About
5
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
9
10 Note: This file is best viewed inside Emacs with org mode.
11
12 * Configs
13
14 This section contains the configuration files (dotfiles) of various
15 programs I use.
16
17 ** bspwm
18
19 *** bspwmrc
20 :PROPERTIES:
21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22 :END:
23
24 #+begin_src sh :tangle no
25 sxhkd &
26 sh ~/.fehbg &
27 xfce4-panel -d &
28 compton &
29 sleep 0.5 && pasystray --notify=all &
30
31 bspc monitor -d I II III IV V VI VII VIII IX X
32 #bspc monitor eDP-1 -d I II III IV V
33 #bspc monitor HDMI-1 -d VI VII VIII IX X
34
35 #bspc config border_width 2
36 #bspc config window_gap 8
37 bspc config window_gap 0
38
39 bspc config bottom_padding 26
40
41 bspc config split_ratio 0.52
42 bspc config borderless_monocle true
43 bspc config gapless_monocle true
44 bspc config click_to_focus button1
45 bspc config directional_focus_tightness low
46
47 #bspc rule -a Firefox desktop='^1' follow=on
48 bspc rule -a Nightly desktop='^1' follow=on
49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
50 #bspc rule -a Chromium desktop='^4' follow=on
51 bspc rule -a URxvt state=floating
52 bspc rule -a URxvt:tiled state=tiled
53 bspc rule -a Connman-gtk state=floating
54 bspc rule -a Xfce4-panel state=floating
55 bspc rule -a TelegramDesktop state=floating
56 bspc rule -a Ec state=floating
57 bspc rule -a Pavucontrol state=floating
58 bspc rule -a Eog state=floating
59 bspc rule -a Seahorse state=floating
60 bspc rule -a mpv state=floating
61 bspc rule -a Evince state=floating
62 bspc rule -a Meld state=floating
63 bspc rule -a Autokey-gtk state=floating
64 bspc rule -a Mousepad state=floating
65 bspc rule -a Wrapper-1.0 state=floating
66 bspc rule -a File-roller state=floating
67 bspc rule -a Gnome-disks state=floating
68 bspc rule -a Termite state=floating
69 bspc rule -a Termite:tiled state=tiled
70 bspc rule -a Thunderbird:Calendar state=floating
71 bspc rule -a Audacity state=floating
72 bspc rule -a Proof state=floating # pvs x-show-proof
73 bspc rule -a Nm-connection-editor state=floating
74 bspc rule -a Wire state=floating
75 bspc rule -a discord state=floating
76 bspc rule -a X2goclient state=floating
77 bspc rule -a SimpleScreenRecorder state=floating
78 bspc rule -a Gimp state=floating
79 bspc rule -a Wrapper-2.0 state=floating
80 bspc rule -a Zathura state=tiled
81 #+end_src
82
83 *** sxhkdrc
84 :PROPERTIES:
85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86 :END:
87
88 #+begin_src conf :tangle no
89 #
90 # wm independent hotkeys
91 #
92
93 # terminal emulator
94 super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97 #super + {_,shift} + Return
98 # termite{_, --name=tiled}
99
100 # program launcher
101 super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104 super + alt + space
105 xfce4-popup-whiskermenu
106
107 # window finder
108 super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111 # password manager
112 alt + space
113 rofi-pass
114
115 # firefox
116 #super + r
117 # firefox
118
119 # chromium
120 #super + c
121 # chromium -incognito
122
123 # emacs
124 super + e
125 emacs
126
127 # make sxhkd reload its configuration files:
128 super + Escape
129 pkill -USR1 -x sxhkd
130
131 # volume {up,down}
132 XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135 # mute
136 XF86AudioMute
137 pamixer --toggle-mute
138
139 XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142 # playback control
143 XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146 # lock the screen
147 super + shift + q
148 light-locker-command -l
149
150 # Toggle keyboard layout
151 super + F7
152 toggle-layout
153
154 # Toggle Xfce presentation mode
155 XF86LaunchB
156 toggle-presentation-mode
157
158 # monitor brightness
159 XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162 super + apostrophe
163 rofi-light
164
165 # keyboard brightness
166 #XF86KbdBrightness{Up,Down}
167 # kbdlight {up,down}
168
169 XF86RotateWindows
170 toggle-tablet
171
172 #
173 # bspwm hotkeys
174 #
175
176 # quit bspwm normally
177 super + alt + Escape
178 bspc quit
179
180 # close and kill
181 super + {w,q}
182 bspc node -{c,k}
183
184 # alternate between the tiled and monocle layout
185 super + m
186 bspc desktop -l next
187
188 # send the newest marked node to the newest preselected node
189 super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192 # swap the current node and the biggest node
193 super + g
194 bspc node -s biggest
195
196 #
197 # state/flags
198 #
199
200 # set the window state
201 super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204 # set the node flags
205 super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208 #
209 # focus/swap
210 #
211
212 # focus the node in the given direction
213 super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216 # focus the node for the given path jump
217 super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220 # focus the next/previous node in the current desktop
221 super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224 # focus the next/previous desktop in the current monitor
225 super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228 # send to next/prev desktop
229 super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232 # focus the last node/desktop
233 super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236 # focus the older or newer node in the focus history
237 super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242 # focus or send to the given desktop
243 super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246 #
247 # preselect
248 #
249
250 # preselect the direction
251 super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254 # preselect the ratio
255 super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258 # cancel the preselection for the focused node
259 super + ctrl + space
260 bspc node -p cancel
261
262 # cancel the preselection for the focused desktop
263 super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266 #
267 # move/resize
268 #
269
270 # expand a window by moving one of its side outward
271 super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274 # contract a window by moving one of its side inward
275 super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278 # move a floating window
279 super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282 #alt + bracket{left,right}
283 # xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284 #+end_src
285
286 ** compton
287 :PROPERTIES:
288 :header-args+: :tangle ~/.config/compton.conf
289 :END:
290
291 #+begin_src conf :tangle no
292 # Shadow
293 shadow = false; # Enabled client-side shadows on windows.
294 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295 no-dnd-shadow = true; # Don't draw shadows on DND windows.
296 clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298 shadow-radius = 5; # The blur radius for shadows. (default 12)
299 shadow-offset-x = -5; # The left offset for shadows. (default -15)
300 shadow-offset-y = -5; # The top offset for shadows. (default -15)
301 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306 # shadow-exclude = "n:e:Notification";
307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311 # Opacity
312 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323 # blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326 # blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332 # Fading
333 fading = false; # Fade windows during opacity changes.
334 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338 fade-exclude = [ ]; # Exclude conditions for fading.
339
340 # Other
341 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355 dbe = false; # Enable DBE painting mode. Rarely needed.
356 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368 # GLX backend # GLX backend fine-tune options. See man page for more info.
369 glx-no-stencil = true; # Recommended.
370 glx-copy-from-front = false; # Useful with --glx-swap-method,
371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372 # glx-no-rebind-pixmap = true; # Recommended if it works.
373 glx-no-rebind-pixmap = true; # Recommended if it works.
374 #glx-swap-method = "4"; # See man page.
375 glx-swap-method = "4"; # See man page.
376
377 # Window type settings
378 wintypes:
379 {
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389 };
390 #+end_src
391
392 ** dovecot
393 :PROPERTIES:
394 :header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
395 :END:
396
397 #+begin_src conf
398 protocols = imap
399
400 listen = 127.0.0.1
401 log_path = /var/log/dovecot.log
402 info_log_path = /var/log/dovecot-info.log
403
404 ssl = no
405 disable_plaintext_auth = no
406
407 auth_verbose = yes
408 auth_mechanisms = plain
409
410 passdb {
411 driver = passwd-file
412 args = /etc/dovecot/passwd
413 }
414
415 userdb {
416 driver = static
417 args = uid=amin gid=amin home=/home/amin/mail/%d/%n
418 default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
419 }
420
421 # mail_home = /home/amin/mail/%d/%n
422 # mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
423
424 # namespace {
425 # inbox = yes
426 # separator = /
427 # }
428
429 mail_plugins = $mail_plugins fts fts_lucene
430
431 plugin {
432 fts = lucene
433 fts_lucene = whitespace_chars=@.
434 fts_autoindex = yes
435 }
436 #+end_src
437
438 ** Dunst
439 :PROPERTIES:
440 :header-args+: :tangle ~/.config/dunst/dunstrc
441 :END:
442
443 #+begin_src conf
444 [global]
445 #font = Ubuntu Mono 10.5
446 font = Inconsolata 11
447
448 # Path to default icons.
449 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
450
451 icon_position = left
452 # <b>bold</b>
453 # <i>italic</i>
454 # <s>strikethrough<s/>
455 # <u>underline</u>
456 markup = full
457 # The format of the message. Possible variables are:
458 # %a appname
459 # %s summary
460 # %b body
461 # %i iconname (including its path)
462 # %I iconname (without its path)
463 # %p progress value if set ([ 0%] to [100%]) or nothing
464 # Markup is allowed
465 format = "<b>%s</b>\n%b"
466 # Sort messages by urgency
467 sort = yes
468 # Show how many messages are currently hidden (because of geometry)
469 indicate_hiddenl= no
470 # Alignment of message text.
471 # Possible values are "left", "center" and "right"
472 alignment = center
473 # The frequency with wich text that is longer than the notification
474 # window allows bounces back and forth.
475 # This option conflicts with 'word_wrap'.
476 # Set to 0 to disable
477 bounce_freq = 3
478 # show age of message if message is older than show_age_threshold seconds.
479 # set to -1 to disable
480 show_age_threshold = -1
481 # split notifications into multiple lines if they don't fit into geometry
482 word_wrap = yes
483 # ignore newlines '\n' in notifications
484 ignore_newline = no
485 # The geometry of the message window.
486 # geometry [{width}]x{height}][+/-{x}+/-{y}]
487 # The height is measured in number of notifications everything else in pixels. If the width
488 # is omitted but the height is given ("-geometry x2"), the message window
489 # expands over the whole screen (dmenu-like). If width is 0,
490 # the window expands to the longest message displayed.
491 # A positive x is measured from the left, a negative from the
492 # right side of the screen. Y is measured from the top and down respectevly.
493 # The width can be negative. In this case the actual width is the
494 # screen width minus the width defined in within the geometry option.
495 #geometry = "410x12-12+12"
496 #geometry = "0x0-30-30"
497 geometry = "260x12-30-30"
498 # The transparency of the window. range: [0; 100]
499 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
500 transparency = 0
501 # Don't remove messages, if the user is idle (no mouse or keyboard input)
502 # for longer than idle_threshold seconds.
503 # Set to 0 to disable.
504 idle_threshold = 120
505 # Which monitor should the notifications be displayed on.
506 monitor = 0
507 # Display notification on focused monitor. Possible modes are:
508 # mouse: follow mouse pointer
509 # keyboard: follow window with keyboard focus
510 # none: don't follow anything
511 #
512 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
513 # This should be the case for almost all modern windowmanagers.
514 #
515 # If this option is set to mouse or keyboard, the monitor option will be
516 # ignored.
517 follow = keyboard
518 # should a notification popped up from history be sticky or
519 # timeout as if it would normally do.
520 sticky_history = yes
521 # The height of a single line. If the height is smaller than the font height,
522 # it will get raised to the font height.
523 # This adds empty space above and under the text.
524 line_height = 0
525
526 show_indicators = yes
527
528 # Draw a line of 'separatpr_height' pixel height between two notifications.
529 # Set to 0 to disable
530 separator_height = 3
531 # padding between text and separator
532 padding = 8
533 # horizontal padding
534 horizontal_padding = 8
535 # Define a color for the separator.
536 # possible values are:
537 # * auto: dunst tries to find a color fitting to the background
538 # * foreground: use the same color as the foreground
539 # * frame: use the same color as the frame.
540 # * anything else will be interpreted as a X color
541 separator_color = foreground
542 # print a notification on startup
543 # This is mainly for error detection, since dbus (re-)starts dunst
544 # automatically after a crash.
545 startup_notification = false
546 # dmenu path
547 #dmenu = /usr/bin/dmenu -p dunst:
548 dmenu = /usr/bin/rofi -dmenu -p dunst:
549 # browser for opening urls in context menu
550 browser = /usr/bin/firefox -new-tab
551 [frame]
552 width = 0
553 color = "#377222"
554 [shortcuts]
555 # shortcuts are specified as [modifier+][modifier+]...key
556 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
557 # and 'mod4' (windows-key)
558 # xev might be helpful to find names for keys
559 # close notification
560 close = ctrl+space
561 # close all notifications
562 close_all = ctrl+shift+space
563 # redisplay last message(s)
564 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
565 history = ctrl+shift+h
566 # context menu
567 context = ctrl+shift+period
568 [urgency_low]
569 # IMPORTANT: colors have to be defined in quotation marks.
570 # Otherwise the '#' and following would be interpreted as a comment.
571 background = "#1d2a30"
572 foreground = "#71c2af"
573 timeout = 3
574 [urgency_normal]
575 background = "#1d2a30"
576 foreground = "#71c2af"
577 timeout = 0
578 [urgency_critical]
579 background = "#1d2a30"
580 foreground = "#ff9982"
581 timeout = 0
582
583 # Every section that isn't one of the above is interpreted as a rules
584 # to override settings for certain messages.
585 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
586 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
587 # and 'format'.
588 # Shell-like globbing will get expanded.
589 #
590 # SCRIPTING
591 # you can specify a script that gets run when the rule matches by setting
592 # the 'script' option.
593 # The script will be called as follows:
594 # script appname summary body icon urgency
595 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
596 #
597 # NOTE: if you don't want a notification to be displayed, set the format to ""
598 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
599 # fitting options for rules.
600 #[espeak]
601 # summary = "*"
602 # script = dunst_espeak.sh
603 #[script-test]
604 # summary = "*script*"
605 # script = dunst_test.sh
606 #[ignore]
607 ## This notification will not be displayed
608 # summary = "foobar"
609 # format = ""
610 #[signed_on]
611 # appname = Pidgin
612 # summary = "*signed on*"
613 # urgency = low
614 #
615 #[signed_off]
616 # appname = Pidgin
617 # summary = *signed off*
618 # urgency = low
619 #
620 #[says]
621 # appname = Pidgin
622 # summary = *says*
623 # urgency = critical
624 #
625 #[twitter]
626 # appname = Pidgin
627 # summary = *twitter.com*
628 # urgency = normal
629 #
630 [xfpm-backlight]
631 summary = *Brightness*
632 urgency = low
633 #+end_src
634
635 ** Fontconfig
636 :PROPERTIES:
637 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
638 :END:
639
640 #+begin_src xml
641 <?xml version="1.0"?>
642 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
643 <fontconfig>
644 <match target="font">
645 <edit mode="assign" name="rgba">
646 <const>rgb</const>
647 </edit>
648 </match>
649 <match target="font">
650 <edit mode="assign" name="hinting">
651 <bool>true</bool>
652 </edit>
653 </match>
654 <match target="font">
655 <edit mode="assign" name="hintstyle">
656 <const>hintslight</const>
657 </edit>
658 </match>
659 <match target="font">
660 <edit mode="assign" name="antialias">
661 <bool>true</bool>
662 </edit>
663 </match>
664 <match target="font">
665 <edit mode="assign" name="lcdfilter">
666 <const>lcddefault</const>
667 </edit>
668 </match>
669 <dir>~/.fonts</dir>
670
671 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
672 <alias binding="same">
673 <family>Helvetica</family>
674 <prefer>
675 <family>Liberation Sans</family>
676 </prefer>
677 </alias>
678 </fontconfig>
679 #+end_src
680
681 ** getmail
682
683 *** getmailrc
684 :PROPERTIES:
685 :header-args+: :tangle ~/.getmail/getmailrc
686 :END:
687
688 #+begin_src conf
689 [retriever]
690 type = SimplePOP3SSLRetriever
691 server = fencepost.gnu.org
692 username = bandali
693 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
694 port = 995
695 use_apop = True
696
697 [destination]
698 type = Maildir
699 path = ~/mail/gnu/Inbox/
700
701 [options]
702 delete = True
703 #+end_src
704
705 *** getmail.service
706 :PROPERTIES:
707 :header-args+: :tangle ~/.config/systemd/user/getmail.service
708 :END:
709
710 #+begin_src conf :tangle no
711 [Unit]
712 Description=getmail service
713
714 [Service]
715 Type=oneshot
716 ExecStart=/usr/bin/getmail
717 StandardOutput=syslog
718 StandardError=syslog
719 #+end_src
720
721 *** getmail.timer
722 :PROPERTIES:
723 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
724 :END:
725
726 #+begin_src conf :tangle no
727 [Unit]
728 Description=getmail timer
729
730 [Timer]
731 OnCalendar=*:0/30
732 Persistent=true
733 Unit=getmail.service
734
735 [Install]
736 WantedBy=timers.target
737 #+end_src
738
739 ** Git
740
741 *** gitconfig
742 :PROPERTIES:
743 :header-args+: :tangle ~/.gitconfig
744 :END:
745
746 **** user
747 #+begin_src conf
748 [user]
749 name = Amin Bandali
750 email = bandali@gnu.org
751 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
752 #+end_src
753
754 **** signing
755 #+begin_src conf
756 [commit]
757 gpgsign = true
758 # [format]
759 # signoff = true
760 #+end_src
761
762 **** core
763 #+begin_src conf
764 [core]
765 autocrlf = input # CRLF -> LF on commit
766 editor = emacsclient -t
767 excludesfile = ~/.gitignore_global
768 pager = "less"
769 #+end_src
770
771 **** gpg
772 #+begin_src conf
773 [gpg]
774 program = gpg2
775 #+end_src
776
777 **** alias
778 #+begin_src conf
779 [alias]
780 git = !exec git # handle nested git calls, e.g. git git status
781 aliases = config --get-regexp '^alias\\.'
782 a = add
783 s = status
784 sl = status --long
785 c = checkout
786 cb = checkout -b
787 b = branch
788 r = rebase
789 p = pull
790 pr = pull --rebase
791 ps = push
792 psf = push --force
793 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
794 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
795 #+end_src
796
797 **** color
798 #+begin_src conf
799 [color]
800 ui = auto
801 [color "status"]
802 added = green bold
803 changed = red bold
804 untracked = red bold
805 [color "branch"]
806 current = green bold
807 remote = magenta bold
808 [color "diff"]
809 new = green bold
810 old = red bold
811 #+end_src
812
813 **** status
814 #+begin_src conf
815 [status]
816 # showUntrackedFiles = all
817 short=true
818 branch=true
819 #+end_src
820
821 **** github
822 #+begin_src conf
823 [github]
824 user = aminb
825 #+end_src
826
827 **** send-email
828 #+begin_src conf
829 [sendemail]
830 smtpuser = bandali
831 smtpserver = fencepost.gnu.org
832 smtpserverport = 587
833 smtpencryption = tls
834 annotate = yes
835 #+end_src
836
837 *** gitignore
838 :PROPERTIES:
839 :header-args+: :tangle ~/.gitignore_global
840 :END:
841
842 #+begin_src conf
843 *.orig
844 *.py[co]
845 *.sublime-workspace
846 *~
847 .DS_Store
848 *.elc
849 *-autoloads.el
850 #+end_src
851
852 ** GnuPG
853 :PROPERTIES:
854 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
855 :END:
856
857 #+begin_src conf
858 default-cache-ttl 43200
859 max-cache-ttl 43200
860
861 default-cache-ttl-ssh 10800
862 max-cache-ttl-ssh 10800
863
864 # pinentry-program /usr/bin/pinentry-qt
865 #+end_src
866
867 ** GTK
868
869 *** gtk-2.0
870 :PROPERTIES:
871 :header-args+: :tangle ~/.gtkrc-2.0
872 :END:
873
874 #+begin_src conf
875 gtk-theme-name="Greybird"
876 gtk-icon-theme-name="Paper"
877 gtk-font-name="Ubuntu 10"
878 gtk-menu-images=0
879 # gtk-key-theme-name = "Emacs"
880 #+end_src
881
882 *** gtk-3.0
883 :PROPERTIES:
884 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
885 :END:
886
887 #+begin_src conf :tangle no
888 [Settings]
889 gtk-icon-theme-name = Paper
890 # gtk-theme-name = Adwaita
891
892 gtk-theme-name = Greybird
893 # gtk-theme-name = Arc-Darker
894 # gtk-theme-name = Numix-ArchBlue
895
896 gtk-font-name = Ubuntu 10
897 # gtk-key-theme-name = Emacs
898 #+end_src
899
900 ** [[https://github.com/Leinnan/i3gs][i3gs]]
901 :PROPERTIES:
902 :header-args+: :tangle ~/.config/i3gs/config
903 :END:
904
905 #+begin_src conf :comments none :tangle no
906 borders_width=0 0 2 0
907 separator_width=10
908
909 #[mpd]
910 #preset=MPD
911 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
912 #borders_color=#7FDBFF
913
914 [ram]
915 preset=RAM
916 title=<span weight='heavy' fgcolor='#3D9970'> </span>
917 borders_color=#3D9970
918
919 #[cpu]
920 #preset=CPU
921 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
922 #borders_color=#2ECC40
923
924 #[hdd]
925 #preset=HDD
926 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
927 #borders_color=#01FF70
928
929 [volume]
930 command=volume-info
931 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
932 borders_color=#7FDBFF
933
934 [battery]
935 preset=BAT
936 command=battery-percentage-time
937 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
938 borders_color=#39CCCC
939
940 [wifi]
941 preset=WIFI
942 title=<span weight='heavy' fgcolor='#01FF70'> </span>
943 borders_color=#01FF70
944
945 [date]
946 preset=DATE
947 command=date '+%-I:%M, %a %b %d '
948 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
949 borders_color=#FFDC00
950 separator_width=0
951 #+end_src
952
953 ** i3status
954 :PROPERTIES:
955 :header-args+: :tangle ~/.config/i3status/config
956 :END:
957
958 #+begin_src conf :comments none
959 # i3status configuration file.
960 # see "man i3status" for documentation.
961
962 # It is important that this file is edited as UTF-8.
963 # The following line should contain a sharp s:
964 # ß
965 # If the above line is not correctly displayed, fix your editor first!
966
967 general {
968 colors = true
969 interval = 5
970 output_format = "i3bar"
971 }
972
973 # order += "ipv6"
974 order += "disk /"
975 order += "disk /data"
976 order += "wireless _first_"
977 order += "ethernet _first_"
978 order += "battery 0"
979 order += "volume master"
980 order += "load"
981 order += "tztime local"
982
983 wireless _first_ {
984 format_up = "W:%quality %essid %ip"
985 format_down = "W: down"
986 }
987
988 ethernet _first_ {
989 # if you use %speed, i3status requires root privileges
990 format_up = "E: %ip (%speed)"
991 format_down = "E: down"
992 }
993
994 battery 0 {
995 format = "%status %percentage %remaining (%consumption)"
996 path = "/sys/class/power_supply/BAT%d/uevent"
997 low_threshold = "10"
998 threshold_type = "percentage"
999 last_full_capacity = true
1000 integer_battery_capacity = true
1001 hide_seconds = true
1002 }
1003
1004 tztime local {
1005 format = "%-I:%M%P %a %b %d"
1006 }
1007
1008 volume master {
1009 format = "♪ %volume"
1010 format_muted = "🔇 %volume"
1011 device = "pulse"
1012 }
1013
1014 load {
1015 format = "%1min"
1016 }
1017
1018 disk "/" {
1019 format = "/ %avail"
1020 }
1021
1022 disk "/data" {
1023 format = "/data %avail"
1024 }
1025 #+end_src
1026
1027 ** isync
1028
1029 *** mbsyncrc
1030 :PROPERTIES:
1031 :header-args+: :tangle ~/.mbsyncrc
1032 :END:
1033
1034 #+begin_src conf
1035 # Global defaults
1036 CopyArrivalDate yes
1037 Create Both
1038 Expunge Both
1039
1040 ######
1041 IMAPAccount amin
1042 Host mail.aminb.org
1043 User amin@aminb.org
1044 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
1045 SSLType IMAPS
1046
1047 IMAPStore amin-remote
1048 Account amin
1049
1050 IMAPAccount amin-dovecot
1051 Host 127.0.0.1
1052 Port 143
1053 User amin@aminb.org
1054 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
1055 SSLType None
1056
1057 IMAPStore amin-local
1058 Account amin-dovecot
1059
1060 Channel amin
1061 Master :amin-remote:
1062 Slave :amin-local:
1063 Patterns *
1064
1065 ######
1066 IMAPAccount uwaterloo
1067 Host connect.uwaterloo.ca
1068 User abandali
1069 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1070 SSLType IMAPS
1071
1072 IMAPStore uwaterloo-remote
1073 Account uwaterloo
1074
1075 IMAPAccount uwaterloo-dovecot
1076 Host 127.0.0.1
1077 Port 143
1078 User abandali@uwaterloo.ca
1079 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
1080 SSLType None
1081
1082 IMAPStore uwaterloo-local
1083 Account uwaterloo-dovecot
1084
1085 Channel uwaterloo
1086 Master :uwaterloo-remote:
1087 Slave :uwaterloo-local:
1088 Patterns *
1089 #+end_src
1090
1091 *** mbsync.service
1092 :PROPERTIES:
1093 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1094 :END:
1095
1096 #+begin_src conf :tangle no
1097 [Unit]
1098 Description=mbsync service
1099
1100 [Service]
1101 Type=oneshot
1102 ExecStart=/usr/bin/mbsync -Va
1103 StandardOutput=syslog
1104 StandardError=syslog
1105 #+end_src
1106
1107 *** mbsync.timer
1108 :PROPERTIES:
1109 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1110 :END:
1111
1112 #+begin_src conf :tangle no
1113 [Unit]
1114 Description=mbsync timer
1115
1116 [Timer]
1117 OnCalendar=*:0/15
1118 Persistent=true
1119 Unit=mbsync.service
1120
1121 [Install]
1122 WantedBy=timers.target
1123 #+end_src
1124
1125 ** Latexmk
1126 :PROPERTIES:
1127 :header-args+: :tangle ~/.latexmkrc
1128 :END:
1129
1130 #+begin_src conf
1131 $pdf_previewer = "start zathura %O %S";
1132 $clean_ext = "aux out";
1133
1134 # $pdf_update_method = 4;
1135 # $pdf_update_command = "zathura %O %S";
1136
1137 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1138 # by Ctrl+click in the PDF.
1139 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1140 # editor.
1141 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1142 #+end_src
1143
1144 ** libinput
1145
1146 Improve XPS 15 9560's touchpad experience.
1147
1148 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1149 #+begin_src conf :tangle no
1150 Section "InputClass"
1151 Identifier "libinput touchpad catchall"
1152 Driver "libinput"
1153 MatchIsTouchpad "on"
1154 Option "ClickMethod" "clickfinger"
1155 Option "NaturalScrolling" "true"
1156 Option "Tapping" "on"
1157 Option "TappingButtonMap" "lrm"
1158 EndSection
1159 #+end_src
1160
1161 ** mpd
1162 :PROPERTIES:
1163 :header-args+: :tangle ~/.config/mpd/mpd.conf
1164 :END:
1165
1166 #+begin_src conf
1167 # An example configuration file for MPD.
1168 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1169
1170
1171 # Files and directories #######################################################
1172 #
1173 # This setting controls the top directory which MPD will search to discover the
1174 # available audio files and add them to the daemon's online database. This
1175 # setting defaults to the XDG directory, otherwise the music directory will be
1176 # be disabled and audio files will only be accepted over ipc socket (using
1177 # file:// protocol) or streaming files over an accepted protocol.
1178 #
1179 music_directory "~/usr/music"
1180 #
1181 # This setting sets the MPD internal playlist directory. The purpose of this
1182 # directory is storage for playlists created by MPD. The server will use
1183 # playlist files not created by the server but only if they are in the MPD
1184 # format. This setting defaults to playlist saving being disabled.
1185 #
1186 playlist_directory "~/.mpd/playlists"
1187 #
1188 # This setting sets the location of the MPD database. This file is used to
1189 # load the database at server start up and store the database while the
1190 # server is not up. This setting defaults to disabled which will allow
1191 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1192 # files over an accepted protocol.
1193 #
1194 db_file "~/.mpd/database"
1195 #
1196 # These settings are the locations for the daemon log files for the daemon.
1197 # These logs are great for troubleshooting, depending on your log_level
1198 # settings.
1199 #
1200 # The special value "syslog" makes MPD use the local syslog daemon. This
1201 # setting defaults to logging to syslog, otherwise logging is disabled.
1202 #
1203 log_file "~/.mpd/log"
1204 #
1205 # This setting sets the location of the file which stores the process ID
1206 # for use of mpd --kill and some init scripts. This setting is disabled by
1207 # default and the pid file will not be stored.
1208 #
1209 pid_file "~/.mpd/pid"
1210 #
1211 # This setting sets the location of the file which contains information about
1212 # most variables to get MPD back into the same general shape it was in before
1213 # it was brought down. This setting is disabled by default and the server
1214 # state will be reset on server start up.
1215 #
1216 state_file "~/.mpd/state"
1217 #
1218 # The location of the sticker database. This is a database which
1219 # manages dynamic information attached to songs.
1220 #
1221 sticker_file "~/.mpd/sticker.sql"
1222 #
1223 ###############################################################################
1224
1225
1226 # General music daemon options ################################################
1227 #
1228 # This setting specifies the user that MPD will run as. MPD should never run as
1229 # root and you may use this setting to make MPD change its user ID after
1230 # initialization. This setting is disabled by default and MPD is run as the
1231 # current user.
1232 #
1233 #user "nobody"
1234 #
1235 # This setting specifies the group that MPD will run as. If not specified
1236 # primary group of user specified with "user" setting will be used (if set).
1237 # This is useful if MPD needs to be a member of group such as "audio" to
1238 # have permission to use sound card.
1239 #
1240 #group "nogroup"
1241 #
1242 # This setting sets the address for the daemon to listen on. Careful attention
1243 # should be paid if this is assigned to anything other then the default, any.
1244 # This setting can deny access to control of the daemon. Not effective if
1245 # systemd socket activiation is in use.
1246 #
1247 # For network
1248 #bind_to_address "any"
1249 #
1250 # And for Unix Socket
1251 #bind_to_address "~/.mpd/socket"
1252 #
1253 # This setting is the TCP port that is desired for the daemon to get assigned
1254 # to.
1255 #
1256 #port "6600"
1257 #
1258 # This setting controls the type of information which is logged. Available
1259 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1260 # argument is recommended for troubleshooting, though can quickly stretch
1261 # available resources on limited hardware storage.
1262 #
1263 #log_level "default"
1264 #
1265 # If you have a problem with your MP3s ending abruptly it is recommended that
1266 # you set this argument to "no" to attempt to fix the problem. If this solves
1267 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1268 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1269 # point gapless MP3 playback can be enabled.
1270 #
1271 #gapless_mp3_playback "yes"
1272 #
1273 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1274 # of starting playback after startup.
1275 #
1276 #restore_paused "no"
1277 #
1278 # This setting enables MPD to create playlists in a format usable by other
1279 # music players.
1280 #
1281 #save_absolute_paths_in_playlists "no"
1282 #
1283 # This setting defines a list of tag types that will be extracted during the
1284 # audio file discovery process. The complete list of possible values can be
1285 # found in the user manual.
1286 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1287 #
1288 # This setting enables automatic update of MPD's database when files in
1289 # music_directory are changed.
1290 #
1291 #auto_update "yes"
1292 #
1293 # Limit the depth of the directories being watched, 0 means only watch
1294 # the music directory itself. There is no limit by default.
1295 #
1296 #auto_update_depth "3"
1297 #
1298 ###############################################################################
1299
1300
1301 # Symbolic link behavior ######################################################
1302 #
1303 # If this setting is set to "yes", MPD will discover audio files by following
1304 # symbolic links outside of the configured music_directory.
1305 #
1306 #follow_outside_symlinks "yes"
1307 #
1308 # If this setting is set to "yes", MPD will discover audio files by following
1309 # symbolic links inside of the configured music_directory.
1310 #
1311 #follow_inside_symlinks "yes"
1312 #
1313 ###############################################################################
1314
1315
1316 # Zeroconf / Avahi Service Discovery ##########################################
1317 #
1318 # If this setting is set to "yes", service information will be published with
1319 # Zeroconf / Avahi.
1320 #
1321 #zeroconf_enabled "yes"
1322 #
1323 # The argument to this setting will be the Zeroconf / Avahi unique name for
1324 # this MPD server on the network.
1325 #
1326 #zeroconf_name "Music Player"
1327 #
1328 ###############################################################################
1329
1330
1331 # Permissions #################################################################
1332 #
1333 # If this setting is set, MPD will require password authorization. The password
1334 # setting can be specified multiple times for different password profiles.
1335 #
1336 #password "password@read,add,control,admin"
1337 #
1338 # This setting specifies the permissions a user has who has not yet logged in.
1339 #
1340 #default_permissions "read,add,control,admin"
1341 #
1342 ###############################################################################
1343
1344
1345 # Database #######################################################################
1346 #
1347
1348 #database {
1349 # plugin "proxy"
1350 # host "other.mpd.host"
1351 # port "6600"
1352 #}
1353
1354 # Input #######################################################################
1355 #
1356
1357 input {
1358 plugin "curl"
1359 # proxy "proxy.isp.com:8080"
1360 # proxy_user "user"
1361 # proxy_password "password"
1362 }
1363
1364 #
1365 ###############################################################################
1366
1367 # Audio Output ################################################################
1368 #
1369
1370 audio_output {
1371 type "pulse"
1372 name "pulse audio"
1373 }
1374
1375 audio_output {
1376 type "fifo"
1377 name "my_fifo"
1378 path "/tmp/mpd.fifo"
1379 format "44100:16:2"
1380 }
1381
1382 # MPD supports various audio output types, as well as playing through multiple
1383 # audio outputs at the same time, through multiple audio_output settings
1384 # blocks. Setting this block is optional, though the server will only attempt
1385 # autodetection for one sound card.
1386 #
1387 # An example of an ALSA output:
1388 #
1389 #audio_output {
1390 # type "alsa"
1391 # name "My ALSA Device"
1392 ## device "hw:0,0" # optional
1393 ## mixer_type "hardware" # optional
1394 ## mixer_device "default" # optional
1395 ## mixer_control "PCM" # optional
1396 ## mixer_index "0" # optional
1397 #}
1398 #
1399 # An example of an OSS output:
1400 #
1401 #audio_output {
1402 # type "oss"
1403 # name "My OSS Device"
1404 ## device "/dev/dsp" # optional
1405 ## mixer_type "hardware" # optional
1406 ## mixer_device "/dev/mixer" # optional
1407 ## mixer_control "PCM" # optional
1408 #}
1409 #
1410 # An example of a shout output (for streaming to Icecast):
1411 #
1412 #audio_output {
1413 # type "shout"
1414 # encoder "vorbis" # optional
1415 # name "My Shout Stream"
1416 # host "localhost"
1417 # port "8000"
1418 # mount "/mpd.ogg"
1419 # password "hackme"
1420 # quality "5.0"
1421 # bitrate "128"
1422 # format "44100:16:1"
1423 ## protocol "icecast2" # optional
1424 ## user "source" # optional
1425 ## description "My Stream Description" # optional
1426 ## url "http://example.com" # optional
1427 ## genre "jazz" # optional
1428 ## public "no" # optional
1429 ## timeout "2" # optional
1430 ## mixer_type "software" # optional
1431 #}
1432 #
1433 # An example of a recorder output:
1434 #
1435 #audio_output {
1436 # type "recorder"
1437 # name "My recorder"
1438 # encoder "vorbis" # optional, vorbis or lame
1439 # path "/var/lib/mpd/recorder/mpd.ogg"
1440 ## quality "5.0" # do not define if bitrate is defined
1441 # bitrate "128" # do not define if quality is defined
1442 # format "44100:16:1"
1443 #}
1444 #
1445 # An example of a httpd output (built-in HTTP streaming server):
1446 #
1447 #audio_output {
1448 # type "httpd"
1449 # name "My HTTP Stream"
1450 # encoder "vorbis" # optional, vorbis or lame
1451 # port "8000"
1452 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1453 ## quality "5.0" # do not define if bitrate is defined
1454 # bitrate "128" # do not define if quality is defined
1455 # format "44100:16:1"
1456 # max_clients "0" # optional 0=no limit
1457 #}
1458 #
1459 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1460 #
1461 #audio_output {
1462 # type "pulse"
1463 # name "My Pulse Output"
1464 ## server "remote_server" # optional
1465 ## sink "remote_server_sink" # optional
1466 #}
1467 #
1468 # An example of a winmm output (Windows multimedia API).
1469 #
1470 #audio_output {
1471 # type "winmm"
1472 # name "My WinMM output"
1473 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1474 # or
1475 ## device "0" # optional
1476 ## mixer_type "hardware" # optional
1477 #}
1478 #
1479 # An example of an openal output.
1480 #
1481 #audio_output {
1482 # type "openal"
1483 # name "My OpenAL output"
1484 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1485 #}
1486 #
1487 # An example of an sndio output.
1488 #
1489 #audio_output {
1490 # type "sndio"
1491 # name "sndio output"
1492 # mixer_type "software"
1493 #}
1494 #
1495 # An example of an OS X output:
1496 #
1497 #audio_output {
1498 # type "osx"
1499 # name "My OS X Device"
1500 ## device "Built-in Output" # optional
1501 ## channel_map "-1,-1,0,1" # optional
1502 #}
1503 #
1504 ## Example "pipe" output:
1505 #
1506 #audio_output {
1507 # type "pipe"
1508 # name "my pipe"
1509 # command "aplay -f cd 2>/dev/null"
1510 ## Or if you're want to use AudioCompress
1511 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1512 ## Or to send raw PCM stream through PCM:
1513 # command "nc example.org 8765"
1514 # format "44100:16:2"
1515 #}
1516 #
1517 ## An example of a null output (for no audio output):
1518 #
1519 #audio_output {
1520 # type "null"
1521 # name "My Null Output"
1522 # mixer_type "none" # optional
1523 #}
1524 #
1525 ###############################################################################
1526
1527
1528 # Normalization automatic volume adjustments ##################################
1529 #
1530 # This setting specifies the type of ReplayGain to use. This setting can have
1531 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1532 # chooses between "track" and "album" depending on the current state of
1533 # random playback. If random playback is enabled then "track" mode is used.
1534 # See <http://www.replaygain.org> for more details about ReplayGain.
1535 # This setting is off by default.
1536 #
1537 #replaygain "album"
1538 #
1539 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1540 # default this setting is disabled.
1541 #
1542 #replaygain_preamp "0"
1543 #
1544 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1545 # By default this setting is disabled.
1546 #
1547 #replaygain_missing_preamp "0"
1548 #
1549 # This setting enables or disables ReplayGain limiting.
1550 # MPD calculates actual amplification based on the ReplayGain tags
1551 # and replaygain_preamp / replaygain_missing_preamp setting.
1552 # If replaygain_limit is enabled MPD will never amplify audio signal
1553 # above its original level. If replaygain_limit is disabled such amplification
1554 # might occur. By default this setting is enabled.
1555 #
1556 #replaygain_limit "yes"
1557 #
1558 # This setting enables on-the-fly normalization volume adjustment. This will
1559 # result in the volume of all playing audio to be adjusted so the output has
1560 # equal "loudness". This setting is disabled by default.
1561 #
1562 #volume_normalization "no"
1563 #
1564 ###############################################################################
1565
1566 # Character Encoding ##########################################################
1567 #
1568 # If file or directory names do not display correctly for your locale then you
1569 # may need to modify this setting.
1570 #
1571 #filesystem_charset "UTF-8"
1572 #
1573 ###############################################################################
1574 #+end_src
1575
1576 ** msmtp
1577 :PROPERTIES:
1578 :header-args+: :tangle ~/.msmtprc
1579 :END:
1580
1581 #+begin_src conf
1582 # Set default values for all following accounts.
1583 defaults
1584 port 587
1585 tls on
1586 auth on
1587 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1588 logfile ~/.msmtp.log
1589
1590 # aminb
1591 account aminb
1592 host mail.aminb.org
1593 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1594 tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
1595 tls_starttls on
1596 from amin@aminb.org
1597 user amin@aminb.org
1598 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1599
1600 # gnu
1601 account gnu
1602 host fencepost.gnu.org
1603 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1604 tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3
1605 tls_starttls on
1606 from bandali@gnu.org
1607 user bandali
1608 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1609
1610 # gnu (old)
1611 account gnu-aminb : gnu
1612 from aminb@gnu.org
1613 account gnu-amin : gnu
1614 from amin@gnu.org
1615 account gnu-mab : gnu
1616 from mab@gnu.org
1617
1618 # uwaterloo
1619 account uwaterloo
1620 host connect.uwaterloo.ca
1621 tls_starttls on
1622 from abandali@uwaterloo.ca
1623 user abandali
1624 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1625 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1626
1627 # Set a default account
1628 account default : aminb
1629 #+end_src
1630
1631 ** ncmpcpp
1632
1633 *** config
1634 :PROPERTIES:
1635 :header-args+: :tangle ~/.ncmpcpp/config
1636 :END:
1637
1638 #+begin_src conf :tangle no
1639 ##############################################################
1640 ## This is the example configuration file. Copy it to ##
1641 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1642 ## and set up your preferences. ##
1643 ##############################################################
1644 #
1645 ##### directories ######
1646 ##
1647 ## Directory for storing ncmpcpp related files.
1648 ## Changing it is useful if you want to store
1649 ## everything somewhere else and provide command
1650 ## line setting for alternative location to config
1651 ## file which defines that while launching ncmpcpp.
1652 ##
1653 #
1654 ncmpcpp_directory = ~/.ncmpcpp
1655 #
1656 ##
1657 ## Directory for storing downloaded lyrics. It
1658 ## defaults to ~/.lyrics since other MPD clients
1659 ## (eg. ncmpc) also use that location.
1660 ##
1661 #
1662 #lyrics_directory = ~/.lyrics
1663 #
1664 ##### connection settings #####
1665 #
1666 #mpd_host = localhost
1667 #
1668 #mpd_port = 6600
1669 #
1670 #mpd_connection_timeout = 5
1671 #
1672 ## Needed for tag editor and file operations to work.
1673 ##
1674 mpd_music_dir = ~/usr/music
1675 #
1676 #mpd_crossfade_time = 5
1677 #
1678 ##### music visualizer #####
1679 ##
1680 ## Note: In order to make music visualizer work you'll
1681 ## need to use mpd fifo output, whose format parameter
1682 ## has to be set to 44100:16:1 for mono visualization
1683 ## or 44100:16:2 for stereo visualization. Example
1684 ## configuration (it has to be put into mpd.conf):
1685 ##
1686 ## audio_output {
1687 ## type "fifo"
1688 ## name "Visualizer feed"
1689 ## path "/tmp/mpd.fifo"
1690 ## format "44100:16:2"
1691 ## }
1692 ##
1693 #
1694 visualizer_fifo_path = /tmp/mpd.fifo
1695 #
1696 ##
1697 ## Note: Below parameter is needed for ncmpcpp
1698 ## to determine which output provides data for
1699 ## visualizer and thus allow syncing between
1700 ## visualization and sound as currently there
1701 ## are some problems with it.
1702 ##
1703 #
1704 visualizer_output_name = my fifo
1705 #
1706 ##
1707 ## If you set format to 44100:16:2, make it 'yes'.
1708 ##
1709 visualizer_in_stereo = yes
1710 #
1711 ##
1712 ## Multiply received samples by given value. Very
1713 ## useful for proper visualization of quiet music.
1714 ##
1715 #visualizer_sample_multiplier = 1
1716 #
1717 ##
1718 ## Note: Below parameter defines how often ncmpcpp
1719 ## has to "synchronize" visualizer and audio outputs.
1720 ## 30 seconds is optimal value, but if you experience
1721 ## synchronization problems, set it to lower value.
1722 ## Keep in mind that sane values start with >=10.
1723 ##
1724 #
1725 visualizer_sync_interval = 30
1726 #
1727 ##
1728 ## Note: To enable spectrum frequency visualization
1729 ## you need to compile ncmpcpp with fftw3 support.
1730 ##
1731 #
1732 ## Available values: spectrum, wave, wave_filled, ellipse.
1733 ##
1734 visualizer_type = spectrum
1735 #
1736 #visualizer_look = ●▮
1737 visualizer_look = "●•"
1738 #
1739 #visualizer_color = blue, cyan, green, yellow, magenta, red
1740 #
1741 ## Alternative subset of 256 colors for terminals that support it.
1742 ##
1743 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1744 #
1745 ##### system encoding #####
1746 ##
1747 ## ncmpcpp should detect your charset encoding
1748 ## but if it failed to do so, you can specify
1749 ## charset encoding you are using here.
1750 ##
1751 ## Note: You can see whether your ncmpcpp build
1752 ## supports charset detection by checking output
1753 ## of `ncmpcpp --version`.
1754 ##
1755 ## Note: Since MPD uses UTF-8 by default, setting
1756 ## this option makes sense only if your encoding
1757 ## is different.
1758 ##
1759 #
1760 #system_encoding = ""
1761 #
1762 ##### delays #####
1763 #
1764 ## Time of inactivity (in seconds) after playlist
1765 ## highlighting will be disabled (0 = always on).
1766 ##
1767 #playlist_disable_highlight_delay = 5
1768 #
1769 ## Defines how long messages are supposed to be visible.
1770 ##
1771 #message_delay_time = 5
1772 #
1773 ##### song format #####
1774 ##
1775 ## For a song format you can use:
1776 ##
1777 ## %l - length
1778 ## %f - filename
1779 ## %D - directory
1780 ## %a - artist
1781 ## %A - album artist
1782 ## %t - title
1783 ## %b - album
1784 ## %y - date
1785 ## %n - track number (01/12 -> 01)
1786 ## %N - full track info (01/12 -> 01/12)
1787 ## %g - genre
1788 ## %c - composer
1789 ## %p - performer
1790 ## %d - disc
1791 ## %C - comment
1792 ## %P - priority
1793 ## $R - begin right alignment
1794 ##
1795 ## If you want to make sure that a part of the format is displayed
1796 ## only when certain tags are present, you can archieve it by
1797 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1798 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1799 ## It is also possible to define a list of alternatives by providing
1800 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1801 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1802 ## present.
1803 ##
1804 ## Note: If you want to set limit on maximal length of a tag, just
1805 ## put the appropriate number between % and character that defines
1806 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1807 ##
1808 ## In addition, formats support markers used for text attributes.
1809 ## They are followed by character '$'. After that you can put:
1810 ##
1811 ## - 0 - default window color (discards all other colors)
1812 ## - 1 - black
1813 ## - 2 - red
1814 ## - 3 - green
1815 ## - 4 - yellow
1816 ## - 5 - blue
1817 ## - 6 - magenta
1818 ## - 7 - cyan
1819 ## - 8 - white
1820 ## - 9 - end of current color
1821 ## - b - bold text
1822 ## - u - underline text
1823 ## - r - reverse colors
1824 ## - a - use alternative character set
1825 ##
1826 ## If you don't want to use a non-color attribute anymore, just put it
1827 ## again, but this time insert character '/' between '$' and attribute
1828 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1829 ## or filename with reversed colors.
1830 ##
1831 ## If you want to use 256 colors and/or background colors in formats
1832 ## (the naming scheme is described below in section about color
1833 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1834 ## the artist tag to one of the non-standard colors and make it have
1835 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1836 ## that for standard colors this is interchangable with attributes
1837 ## listed above.
1838 ##
1839 ## Note: colors can be nested.
1840 ##
1841 #
1842 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1843 #
1844 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1845 #
1846 #song_library_format = {%n - }{%t}|{%f}
1847 #
1848 #
1849 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1850 #
1851 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1852 #
1853 #now_playing_prefix = $b
1854 #
1855 #now_playing_suffix = $/b
1856 #
1857 #browser_playlist_prefix = "$2playlist$9 "
1858 #
1859 #selected_item_prefix = $6
1860 #
1861 #selected_item_suffix = $9
1862 #
1863 #modified_item_prefix = $3> $9
1864 #
1865 ##
1866 ## Note: attributes are not supported for the following variables.
1867 ##
1868 #song_window_title_format = {%a - }{%t}|{%f}
1869 ##
1870 ## Note: Below variables are used for sorting songs in browser.
1871 ## The sort mode determines how songs are sorted, and can be used
1872 ## in combination with a sort format to specify a custom sorting format.
1873 ## Available values for browser_sort_mode are "name", "mtime", "format"
1874 ## and "noop".
1875 ##
1876 #
1877 #browser_sort_mode = name
1878 #
1879 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1880 #
1881 ##### columns settings #####
1882 ##
1883 ## syntax of song columns list format is "column column etc."
1884 ##
1885 ## - syntax for each column is:
1886 ##
1887 ## (width of the column)[color of the column]{displayed tag}
1888 ##
1889 ## Note: Width is by default in %, if you want a column to
1890 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1891 ## will be the column that take 10% of screen (so the real width
1892 ## will depend on actual screen size), whereas (10f)[white]{a}
1893 ## will take 10 terminal cells, no matter how wide the screen is.
1894 ##
1895 ## - color is optional (if you want the default one,
1896 ## leave the field empty).
1897 ##
1898 ## Note: You can give a column additional attributes by putting appropriate
1899 ## character after displayed tag character. Available attributes are:
1900 ##
1901 ## - r - column will be right aligned
1902 ## - E - if tag is empty, empty tag marker won't be displayed
1903 ##
1904 ## You can also:
1905 ##
1906 ## - give a column custom name by putting it after attributes,
1907 ## separated with character ':', e.g. {lr:Length} gives you
1908 ## right aligned column of lengths named "Length".
1909 ##
1910 ## - define sequence of tags, that have to be displayed in case
1911 ## predecessor is empty in a way similar to the one in classic
1912 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1913 ## creates column named "Owner" that tries to display artist
1914 ## tag and then composer and performer if previous ones are
1915 ## not available.
1916 ##
1917 #
1918 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1919 #
1920 ##### various settings #####
1921 #
1922 ##
1923 ## Note: Custom command that will be executed each
1924 ## time song changes. Useful for notifications etc.
1925 ##
1926 #execute_on_song_change = ""
1927 #
1928 #playlist_show_mpd_host = no
1929 #
1930 #playlist_show_remaining_time = no
1931 #
1932 #playlist_shorten_total_times = no
1933 #
1934 #playlist_separate_albums = no
1935 #
1936 ##
1937 ## Note: Possible display modes: classic, columns.
1938 ##
1939 #playlist_display_mode = columns
1940 #
1941 #browser_display_mode = classic
1942 #
1943 #search_engine_display_mode = classic
1944 #
1945 #playlist_editor_display_mode = classic
1946 #
1947 #discard_colors_if_item_is_selected = yes
1948 #
1949 #incremental_seeking = yes
1950 #
1951 #seek_time = 1
1952 #
1953 #volume_change_step = 2
1954 #
1955 #autocenter_mode = no
1956 #
1957 #centered_cursor = no
1958 #
1959 ##
1960 ## Note: You can specify third character which will
1961 ## be used to build 'empty' part of progressbar.
1962 ##
1963 #progressbar_look = =>
1964 progressbar_look = "─╼╶"
1965 #progressbar_look = "─⊙╶"
1966 #
1967 #progressbar_boldness = yes
1968 #
1969 ## Available values: database, playlist.
1970 ##
1971 #default_place_to_search_in = database
1972 #
1973 ## Available values: classic, alternative.
1974 ##
1975 #user_interface = classic
1976 #
1977 #data_fetching_delay = yes
1978 #
1979 ## Available values: artist, album_artist, date, genre, composer, performer.
1980 ##
1981 #media_library_primary_tag = artist
1982 #
1983 ## Available values: wrapped, normal.
1984 ##
1985 #default_find_mode = wrapped
1986 #
1987 #default_tag_editor_pattern = %n - %t
1988 #
1989 #header_visibility = yes
1990 #
1991 #statusbar_visibility = yes
1992 #
1993 #titles_visibility = yes
1994 #
1995 #header_text_scrolling = yes
1996 #
1997 #cyclic_scrolling = no
1998 #
1999 #lines_scrolled = 2
2000 #
2001 #follow_now_playing_lyrics = no
2002 #
2003 #fetch_lyrics_for_current_song_in_background = no
2004 #
2005 #store_lyrics_in_song_dir = no
2006 #
2007 #generate_win32_compatible_filenames = yes
2008 #
2009 #allow_for_physical_item_deletion = no
2010 #
2011 ##
2012 ## Note: If you set this variable, ncmpcpp will try to
2013 ## get info from last.fm in language you set and if it
2014 ## fails, it will fall back to english. Otherwise it will
2015 ## use english the first time.
2016 ##
2017 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
2018 ##
2019 #lastfm_preferred_language = en
2020 #
2021 #show_hidden_files_in_local_browser = no
2022 #
2023 ##
2024 ## How shall screen switcher work?
2025 ##
2026 ## - "previous" - switch between the current and previous screen.
2027 ## - "screen1,...,screenN" - switch between given sequence of screens.
2028 ##
2029 ## Screens available for use: help, playlist, browser, search_engine,
2030 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
2031 ##
2032 #screen_switcher_mode = playlist, browser
2033 #
2034 ##
2035 ## Note: You can define startup screen
2036 ## by choosing screen from the list above.
2037 ##
2038 #startup_screen = playlist
2039 #
2040 ##
2041 ## Note: You can define startup slave screen
2042 ## by choosing screen from the list above or
2043 ## an empty value for no slave screen.
2044 ##
2045 #startup_slave_screen = ""
2046 #
2047 #startup_slave_screen_focus = no
2048 #
2049 ##
2050 ## Default width of locked screen (in %).
2051 ## Acceptable values are from 20 to 80.
2052 ##
2053 #
2054 #locked_screen_width_part = 50
2055 #
2056 #ask_for_locked_screen_width_part = yes
2057 #
2058 #jump_to_now_playing_song_at_start = yes
2059 #
2060 #ask_before_clearing_playlists = yes
2061 #
2062 #clock_display_seconds = no
2063 #
2064 #display_volume_level = yes
2065 #
2066 #display_bitrate = no
2067 #
2068 #display_remaining_time = no
2069 #
2070 ## Available values: none, basic, extended, perl.
2071 ##
2072 #regular_expressions = perl
2073 #
2074 ##
2075 ## Note: If below is enabled, ncmpcpp will ignore leading
2076 ## "The" word while sorting items in browser, tags in
2077 ## media library, etc.
2078 ##
2079 #ignore_leading_the = no
2080 #
2081 #block_search_constraints_change_if_items_found = yes
2082 #
2083 #mouse_support = yes
2084 #
2085 #mouse_list_scroll_whole_page = yes
2086 #
2087 #empty_tag_marker = <empty>
2088 #
2089 #tags_separator = " | "
2090 #
2091 #tag_editor_extended_numeration = no
2092 #
2093 #media_library_sort_by_mtime = no
2094 #
2095 #enable_window_title = yes
2096 #
2097 ##
2098 ## Note: You can choose default search mode for search
2099 ## engine. Available modes are:
2100 ##
2101 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2102 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2103 ## but if your mpd is on a remote machine, downloading big database
2104 ## to process it can take a while
2105 ## - 3 - match only exact values (this mode uses mpd function for searching
2106 ## in database and local one for searching in current playlist)
2107 ##
2108 #
2109 #search_engine_default_search_mode = 1
2110 #
2111 #external_editor = nano
2112 #
2113 ## Note: set to yes if external editor is a console application.
2114 ##
2115 #use_console_editor = yes
2116 #
2117 ##### colors definitions #####
2118 ##
2119 ## It is possible to set a background color by setting a color
2120 ## value "<foreground>_<background>", e.g. red_black will set
2121 ## foregound color to red and background color to black.
2122 ##
2123 ## In addition, for terminals that support 256 colors it
2124 ## is possible to set one of them by using a number in range
2125 ## [1, 256] instead of color name, e.g. numerical value
2126 ## corresponding to red_black is 2_1. To find out if the
2127 ## terminal supports 256 colors, run ncmpcpp and check out
2128 ## the bottom of the help screen for list of available colors
2129 ## and their numerical values.
2130 ##
2131 ## Note: due to technical limitations of ncurses, if 256 colors
2132 ## are used, it is possible to either use only the colors with
2133 ## default background color, or all pairs from 1_1 up to 254_127,
2134 ## depending on the ncurses version used.
2135 ##
2136 #
2137 #colors_enabled = yes
2138 #
2139 #empty_tag_color = cyan
2140 #
2141 #header_window_color = default
2142 #
2143 #volume_color = default
2144 #
2145 #state_line_color = default
2146 #
2147 #state_flags_color = default
2148 #
2149 #main_window_color = yellow
2150 #
2151 #color1 = white
2152 #
2153 #color2 = green
2154 #
2155 #main_window_highlight_color = yellow
2156 #
2157 #progressbar_color = black
2158 #
2159 #progressbar_elapsed_color = green
2160 #
2161 #statusbar_color = default
2162 #
2163 #alternative_ui_separator_color = black
2164 #
2165 #active_column_color = red
2166 #
2167 #window_border_color = green
2168 #
2169 #active_window_border = red
2170 #
2171 #+end_src
2172
2173 *** bindings
2174 :PROPERTIES:
2175 :header-args+: :tangle ~/.ncmpcpp/bindings
2176 :END:
2177
2178 #+begin_src conf :tangle no
2179 def_key "j"
2180 scroll_down
2181 def_key "k"
2182 scroll_up
2183
2184 def_key "ctrl-u"
2185 page_up
2186 def_key "ctrl-d"
2187 page_down
2188
2189 def_key "h"
2190 previous_column
2191 def_key "l"
2192 next_column
2193
2194 def_key "."
2195 show_lyrics
2196
2197 def_key "n"
2198 next_found_item
2199 def_key "N"
2200 previous_found_item
2201
2202 def_key "J"
2203 move_sort_order_down
2204 def_key "K"
2205 move_sort_order_up
2206 #+end_src
2207
2208 ** notmuch
2209
2210 *** notmuch-config
2211 :PROPERTIES:
2212 :header-args+: :tangle ~/.notmuch-config
2213 :END:
2214
2215 #+begin_src conf
2216 # .notmuch-config - Configuration file for the notmuch mail system
2217 #
2218 # For more information about notmuch, see https://notmuchmail.org
2219
2220 # Database configuration
2221 #
2222 # The only value supported here is 'path' which should be the top-level
2223 # directory where your mail currently exists and to where mail will be
2224 # delivered in the future. Files should be individual email messages.
2225 # Notmuch will store its database within a sub-directory of the path
2226 # configured here named ".notmuch".
2227 #
2228 [database]
2229 path=/home/amin/oldmail
2230
2231 # User configuration
2232 #
2233 # Here is where you can let notmuch know how you would like to be
2234 # addressed. Valid settings are
2235 #
2236 # name Your full name.
2237 # primary_email Your primary email address.
2238 # other_email A list (separated by ';') of other email addresses
2239 # at which you receive email.
2240 #
2241 # Notmuch will use the various email addresses configured here when
2242 # formatting replies. It will avoid including your own addresses in the
2243 # recipient list of replies, and will set the From address based on the
2244 # address to which the original email was addressed.
2245 #
2246 [user]
2247 name=Amin Bandali
2248 primary_email=amin@aminb.org
2249 other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2250
2251 # Configuration for "notmuch new"
2252 #
2253 # The following options are supported here:
2254 #
2255 # tags A list (separated by ';') of the tags that will be
2256 # added to all messages incorporated by "notmuch new".
2257 #
2258 # ignore A list (separated by ';') of file and directory names
2259 # that will not be searched for messages by "notmuch new".
2260 #
2261 # NOTE: *Every* file/directory that goes by one of those
2262 # names will be ignored, independent of its depth/location
2263 # in the mail store.
2264 #
2265 [new]
2266 tags=new;
2267 #tags=unread;inbox;
2268 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2269
2270 # Search configuration
2271 #
2272 # The following option is supported here:
2273 #
2274 # exclude_tags
2275 # A ;-separated list of tags that will be excluded from
2276 # search results by default. Using an excluded tag in a
2277 # query will override that exclusion.
2278 #
2279 [search]
2280 exclude_tags=deleted;spam;
2281
2282 # Maildir compatibility configuration
2283 #
2284 # The following option is supported here:
2285 #
2286 # synchronize_flags Valid values are true and false.
2287 #
2288 # If true, then the following maildir flags (in message filenames)
2289 # will be synchronized with the corresponding notmuch tags:
2290 #
2291 # Flag Tag
2292 # ---- -------
2293 # D draft
2294 # F flagged
2295 # P passed
2296 # R replied
2297 # S unread (added when 'S' flag is not present)
2298 #
2299 # The "notmuch new" command will notice flag changes in filenames
2300 # and update tags, while the "notmuch tag" and "notmuch restore"
2301 # commands will notice tag changes and update flags in filenames
2302 #
2303 [maildir]
2304 synchronize_flags=true
2305
2306 # Cryptography related configuration
2307 #
2308 # The following option is supported here:
2309 #
2310 # gpg_path
2311 # binary name or full path to invoke gpg.
2312 #
2313 [crypto]
2314 gpg_path=gpg
2315 #+end_src
2316
2317 *** pre-new hook
2318 :PROPERTIES:
2319 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2320 :END:
2321
2322 #+begin_src sh
2323 touch /tmp/gnusieve.log
2324 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2325 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2326 #+end_src
2327
2328 *** post-new hook
2329 :PROPERTIES:
2330 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2331 :END:
2332
2333 #+begin_src sh
2334 # apply sent tag to messages sent by me
2335 notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2336
2337 # initial tagging
2338 notmuch tag -latest -- tag:latest
2339 notmuch tag +inbox +unread +latest -new -- tag:new
2340
2341
2342 # apply tags to lists
2343
2344 # <aminb>
2345 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2346 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2347
2348 notmuch tag -inbox +pay -- folder:amin/pay
2349 notmuch tag -inbox +banking -- folder:amin/banking
2350 notmuch tag -inbox +work -- folder:amin/work
2351 # </aminb>
2352
2353 # <uw>
2354 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2355 notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2356 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2357 notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2358 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2359
2360 notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
2361 notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2362 notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2363 notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2364 notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2365 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2366 # </uw>
2367
2368 # <gnu>
2369 notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2370 notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2371 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2372 notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2373 notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2374 notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2375 notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2376 notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2377 notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2378 notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2379 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2380
2381 notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2382 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2383 notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2384 notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2385
2386 notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2387 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2388 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2389 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2390 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2391 # </gnu>
2392
2393 notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2394 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2395 #+end_src
2396
2397 *** notmuch.service
2398 :PROPERTIES:
2399 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2400 :END:
2401
2402 #+begin_src conf :tangle no
2403 [Unit]
2404 Description=notmuch service
2405
2406 [Service]
2407 Type=oneshot
2408 ExecStart=/usr/bin/notmuch new
2409 StandardOutput=syslog
2410 StandardError=syslog
2411 #+end_src
2412
2413 *** notmuch.timer
2414 :PROPERTIES:
2415 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2416 :END:
2417
2418 #+begin_src conf :tangle no
2419 [Unit]
2420 Description=notmuch timer
2421
2422 [Timer]
2423 OnCalendar=*:0/5
2424 Persistent=true
2425 Unit=notmuch.service
2426
2427 [Install]
2428 WantedBy=timers.target
2429 #+end_src
2430
2431 ** offlineimap
2432
2433 *** offlineimaprc
2434 :PROPERTIES:
2435 :header-args+: :tangle ~/.offlineimaprc
2436 :END:
2437
2438 #+begin_src conf :tangle no
2439 [general]
2440 pythonfile = ~/.offlineimap.py
2441 accounts = Gmail, aminb
2442 maxsyncaccounts = 3
2443
2444 [Account Gmail]
2445 localrepository = GmailL
2446 remoterepository = GmailR
2447
2448 [Account aminb]
2449 localrepository = aminbL
2450 remoterepository = aminbR
2451
2452 [Repository GmailL]
2453 type = Maildir
2454 localfolders = ~/Maildir/Gmail
2455
2456 [Repository GmailR]
2457 type = IMAP
2458 remotehost = imap.gmail.com
2459 remoteusereval = mailuser("gmail")
2460 remotepasseval = mailpasswd("gmail")
2461 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2462 ssl = yes
2463 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2464 maxconnections = 1
2465 realdelete = no
2466
2467 [Repository aminbL]
2468 type = Maildir
2469 localfolders = ~/Maildir/aminb
2470
2471 [Repository aminbR]
2472 type = IMAP
2473 remotehost = mail.aminb.org
2474 remoteusereval = mailuser("aminb")
2475 remotepasseval = mailpasswd("aminb")
2476 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2477 ssl = yes
2478 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2479 maxconnections = 1
2480 realdelete = no
2481 #+end_src
2482
2483 *** offlineimap.py
2484 :PROPERTIES:
2485 :header-args+: :tangle ~/.offlineimap.py
2486 :END:
2487
2488 #+begin_src python :tangle no
2489 import os
2490 import subprocess
2491
2492 def mailpasswd(acct):
2493 acct = os.path.basename(acct)
2494 path = "/home/amin/.passwd/%s.gpg" % acct
2495 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2496 try:
2497 return subprocess.check_output(args).strip()
2498 except subprocess.CalledProcessError:
2499 return ""
2500
2501 def mailuser(acct):
2502 acct = os.path.basename(acct)
2503 path = "/home/amin/.passwd/%s" % acct
2504 args = ["cat", path]
2505 try:
2506 return subprocess.check_output(args).strip()
2507 except subprocess.CalledProcessError:
2508 return ""
2509
2510 def prime_gpg_agent():
2511 ret = False
2512 i = 1
2513 while not ret:
2514 ret = (mailpasswd("prime") == "prime")
2515 if i > 2:
2516 from offlineimap.ui import getglobalui
2517 sys.stderr.write("Error reading in passwords. Terminating.\n")
2518 getglobalui().terminate()
2519 i += 1
2520 return ret
2521
2522 prime_gpg_agent()
2523 #+end_src
2524
2525 ** pigeonhole
2526 *** amin.sieve
2527 :PROPERTIES:
2528 :header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none
2529 :END:
2530
2531 #+begin_src conf
2532 require ["regex", "variables", "fileinto", "envelope",
2533 "mailbox", "imap4flags", "include"];
2534
2535 # webmasters
2536 if anyof (
2537 address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
2538 fileinto :create "gnu.webmasters";
2539 stop;
2540 }
2541
2542 include :personal "lists";
2543 #+end_src
2544
2545 *** lists.sieve
2546 :PROPERTIES:
2547 :header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none
2548 :END:
2549
2550 #+begin_src conf
2551 require ["regex", "variables", "fileinto", "envelope",
2552 "mailbox", "imap4flags", "include"];
2553
2554 # mailing lists
2555 if anyof (
2556 header :contains "list-id"
2557 [ "<emacs-devel.gnu.org>"
2558 , "<emacs-orgmode.gnu.org>"
2559 , "<emacsconf-discuss.gnu.org>"
2560 , "<fencepost-users.gnu.org>"
2561 , "<guix-devel.gnu.org>"
2562 , "<guile-devel.gnu.org>"
2563 , "<help-gnu-emacs.gnu.org>"
2564 , "<info-gnu-emacs.gnu.org>"
2565 , "<info-guix.gnu.org>"
2566 , "<www-commits.gnu.org>"
2567 , "<www-discuss.gnu.org>"
2568 , "<deepspec.lists.cs.princeton.edu>"
2569 , "<haskell-cafe.haskell.org>"
2570 , "<haskell-art.we.lurk.org>"
2571 , "<notmuch.notmuchmail.org>"
2572 ] ) {
2573 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2574 set :lower "listname" "${1}";
2575 fileinto :create "gnu.${listname}";
2576 stop;
2577 }
2578 }
2579
2580 # sr.ht lists, with dots ('.') omitted
2581 if anyof (
2582 header :contains "list-id"
2583 [ "<~bandali/public-inbox@lists.sr.ht>"
2584 , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
2585 , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
2586 , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
2587 , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
2588 ] ) {
2589 if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
2590 set :lower "username" "${1}";
2591 set :lower "listname" "${2}${3}${4}${5}${6}${7}";
2592 fileinto :create "gnu.${username}.${listname}";
2593 stop;
2594 }
2595 }
2596 #+end_src
2597
2598 ** polybar
2599
2600 *** config
2601 :PROPERTIES:
2602 :header-args+: :tangle ~/.config/polybar/config
2603 :END:
2604
2605 #+begin_src conf :tangle no
2606 ;=====================================================
2607 ;
2608 ; To learn more about how to configure Polybar
2609 ; go to https://github.com/jaagr/polybar
2610 ;
2611 ; The README contains alot of information
2612 ;
2613 ;=====================================================
2614
2615 [colors]
2616 ;background = ${xrdb:color0:#222}
2617 background = #222
2618 background-alt = #444
2619 ;foreground = ${xrdb:color7:#222}
2620 foreground = #eee
2621 foreground-alt = #888
2622 primary = #ffb52a
2623 secondary = #e60053
2624 alert = #bd2c40
2625
2626 [bar/main]
2627 ;monitor = ${env:MONITOR:HDMI-1}
2628 width = 100%
2629 height = 27
2630 ;offset-x = 1%
2631 ;offset-y = 1%
2632 radius = 3.0
2633 fixed-center = true
2634
2635 background = ${colors.background}
2636 foreground = ${colors.foreground}
2637
2638 line-size = 3
2639 line-color = #f00
2640
2641 border-size = 4
2642 border-color = #00000000
2643
2644 padding-left = 0
2645 padding-right = 2
2646
2647 module-margin-left = 2
2648 module-margin-right = 2
2649
2650 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2651 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2652 font-2 = Wuncon Siji:pixelsize=10;1
2653 font-3 = FontAwesome:pixelsize=10;1
2654
2655 modules-left = bspwm xwindow
2656 modules-center =
2657 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2658
2659 tray-position = right
2660 tray-padding = 1
2661 ;tray-transparent = true
2662 ;tray-background = #0063ff
2663 tray-maxsize = 18
2664
2665 wm-restack = bspwm
2666
2667 ;override-redirect = true
2668
2669 scroll-up = bspwm-desknext
2670 scroll-down = bspwm-deskprev
2671
2672 [module/xwindow]
2673 type = internal/xwindow
2674 label = %title:0:50:...%
2675
2676 [module/xkeyboard]
2677 type = internal/xkeyboard
2678 blacklist-0 = num lock
2679
2680 format-prefix = " "
2681 format-prefix-foreground = ${colors.foreground-alt}
2682 format-prefix-underline = ${colors.secondary}
2683
2684 label-layout = %layout%
2685 label-layout-underline = ${colors.secondary}
2686
2687 label-indicator-padding = 2
2688 label-indicator-margin = 1
2689 label-indicator-background = ${colors.secondary}
2690 label-indicator-underline = ${colors.secondary}
2691
2692 [module/filesystem]
2693 type = internal/fs
2694 interval = 25
2695
2696 mount-0 = /
2697
2698 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2699 label-unmounted = %mountpoint% not mounted
2700 label-unmounted-foreground = ${colors.foreground-alt}
2701
2702 [module/bspwm]
2703 type = internal/bspwm
2704
2705 label-focused = %index%
2706 label-focused-background = ${colors.background-alt}
2707 label-focused-underline= ${colors.primary}
2708 label-focused-padding = 2
2709
2710 label-occupied = %index%
2711 label-occupied-padding = 2
2712
2713 label-urgent = %index%!
2714 label-urgent-background = ${colors.alert}
2715 label-urgent-padding = 2
2716
2717 label-empty = %index%
2718 label-empty-foreground = ${colors.foreground-alt}
2719 label-empty-padding = 2
2720
2721 [module/i3]
2722 type = internal/i3
2723 format = <label-state> <label-mode>
2724 index-sort = true
2725 wrapping-scroll = false
2726
2727 ; Only show workspaces on the same output as the bar
2728 ;pin-workspaces = true
2729
2730 label-mode-padding = 2
2731 label-mode-foreground = #000
2732 label-mode-background = ${colors.primary}
2733
2734 ; focused = Active workspace on focused monitor
2735 label-focused = %index%
2736 label-focused-background = ${module/bspwm.label-focused-background}
2737 label-focused-underline = ${module/bspwm.label-focused-underline}
2738 label-focused-padding = ${module/bspwm.label-focused-padding}
2739
2740 ; unfocused = Inactive workspace on any monitor
2741 label-unfocused = %index%
2742 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2743
2744 ; visible = Active workspace on unfocused monitor
2745 label-visible = %index%
2746 label-visible-background = ${self.label-focused-background}
2747 label-visible-underline = ${self.label-focused-underline}
2748 label-visible-padding = ${self.label-focused-padding}
2749
2750 ; urgent = Workspace with urgency hint set
2751 label-urgent = %index%
2752 label-urgent-background = ${module/bspwm.label-urgent-background}
2753 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2754
2755 [module/mpd]
2756 type = internal/mpd
2757 format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2758
2759 icon-prev = 
2760 icon-stop = 
2761 icon-play = 
2762 icon-pause = 
2763 icon-next = 
2764
2765 label-song-maxlen = 25
2766 label-song-ellipsis = true
2767
2768 [module/xbacklight]
2769 type = internal/xbacklight
2770
2771 format = <label> <bar>
2772 label = BL
2773
2774 bar-width = 10
2775 bar-indicator = |
2776 bar-indicator-foreground = #ff
2777 bar-indicator-font = 2
2778 bar-fill = ─
2779 bar-fill-font = 2
2780 bar-fill-foreground = #9f78e1
2781 bar-empty = ─
2782 bar-empty-font = 2
2783 bar-empty-foreground = ${colors.foreground-alt}
2784
2785 [module/backlight-acpi]
2786 inherit = module/xbacklight
2787 type = internal/backlight
2788 ;card = intel_backlight
2789 card = mba6x_backlight
2790
2791 [module/cpu]
2792 type = internal/cpu
2793 interval = 2
2794 format-prefix = " "
2795 format-prefix-foreground = ${colors.foreground-alt}
2796 format-underline = #f90000
2797 label = %percentage%%
2798
2799 [module/memory]
2800 type = internal/memory
2801 interval = 2
2802 format-prefix = " "
2803 format-prefix-foreground = ${colors.foreground-alt}
2804 format-underline = #4bffdc
2805 label = %percentage_used%%
2806
2807 [module/wlan]
2808 type = internal/network
2809 interface =
2810 interval = 3.0
2811
2812 format-connected = <ramp-signal> <label-connected>
2813 format-connected-underline = #9f78e1
2814 label-connected = %essid%
2815
2816 format-disconnected =
2817 ;format-disconnected = <label-disconnected>
2818 ;format-disconnected-underline = ${self.format-connected-underline}
2819 ;label-disconnected = %ifname% disconnected
2820 ;label-disconnected-foreground = ${colors.foreground-alt}
2821
2822 ramp-signal-0 = 
2823 ramp-signal-1 = 
2824 ramp-signal-2 = 
2825 ramp-signal-3 = 
2826 ramp-signal-4 = 
2827 ramp-signal-foreground = ${colors.foreground-alt}
2828
2829 [module/eth]
2830 type = internal/network
2831 interface =
2832 interval = 3.0
2833
2834 format-connected-underline = #55aa55
2835 format-connected-prefix = " "
2836 format-connected-prefix-foreground = ${colors.foreground-alt}
2837 label-connected = %local_ip%
2838
2839 format-disconnected =
2840 ;format-disconnected = <label-disconnected>
2841 ;format-disconnected-underline = ${self.format-connected-underline}
2842 ;label-disconnected = %ifname% disconnected
2843 ;label-disconnected-foreground = ${colors.foreground-alt}
2844
2845 [module/date]
2846 type = internal/date
2847 interval = 5
2848
2849 date =
2850 date-alt = " %Y-%m-%d"
2851
2852 time = %H:%M
2853 time-alt = %H:%M:%S
2854
2855 format-prefix = 
2856 format-prefix-foreground = ${colors.foreground-alt}
2857 format-underline = #0a6cf5
2858
2859 label = %date% %time%
2860
2861 [module/volume]
2862 type = internal/volume
2863
2864 format-volume = <label-volume> <bar-volume>
2865 label-volume = vol
2866 label-volume-foreground = ${root.foreground}
2867
2868 format-muted-prefix = " "
2869 format-muted-foreground = ${colors.foreground-alt}
2870 label-muted = mute
2871
2872 bar-volume-width = 10
2873 bar-volume-foreground-0 = #55aa55
2874 bar-volume-foreground-1 = #55aa55
2875 bar-volume-foreground-2 = #55aa55
2876 bar-volume-foreground-3 = #55aa55
2877 bar-volume-foreground-4 = #55aa55
2878 bar-volume-foreground-5 = #f5a70a
2879 bar-volume-foreground-6 = #ff5555
2880 bar-volume-gradient = false
2881 bar-volume-indicator = |
2882 bar-volume-indicator-font = 2
2883 bar-volume-fill = ─
2884 bar-volume-fill-font = 2
2885 bar-volume-empty = ─
2886 bar-volume-empty-font = 2
2887 bar-volume-empty-foreground = ${colors.foreground-alt}
2888
2889 [module/battery]
2890 type = internal/battery
2891 battery = BAT0
2892 adapter = ADP1
2893 full-at = 64
2894
2895 format-charging = <animation-charging> <label-charging>
2896 format-charging-underline = #ffb52a
2897
2898 format-discharging = <ramp-capacity> <label-discharging>
2899 format-discharging-underline = ${self.format-charging-underline}
2900
2901 format-full-prefix = " "
2902 format-full-prefix-foreground = ${colors.foreground-alt}
2903 format-full-underline = ${self.format-charging-underline}
2904
2905 ramp-capacity-0 = 
2906 ramp-capacity-1 = 
2907 ramp-capacity-2 = 
2908 ramp-capacity-foreground = ${colors.foreground-alt}
2909
2910 animation-charging-0 = 
2911 animation-charging-1 = 
2912 animation-charging-2 = 
2913 animation-charging-foreground = ${colors.foreground-alt}
2914 animation-charging-framerate = 750
2915
2916 [module/temperature]
2917 type = internal/temperature
2918 thermal-zone = 1
2919 warn-temperature = 66
2920
2921 format = <ramp> <label>
2922 format-underline = #f50a4d
2923 format-warn = <ramp> <label-warn>
2924 format-warn-underline = ${self.format-underline}
2925
2926 label = %temperature%
2927 label-warn = %temperature%
2928 label-warn-foreground = ${colors.secondary}
2929
2930 ramp-0 = 
2931 ramp-1 = 
2932 ramp-2 = 
2933 ramp-foreground = ${colors.foreground-alt}
2934
2935 [module/powermenu]
2936 type = custom/menu
2937
2938 format-spacing = 1
2939
2940 label-open = 
2941 label-open-foreground = ${colors.secondary}
2942 label-close =  cancel
2943 label-close-foreground = ${colors.secondary}
2944 label-separator = |
2945 label-separator-foreground = ${colors.foreground-alt}
2946
2947 menu-0-0 = reboot
2948 menu-0-0-exec = menu-open-1
2949 menu-0-1 = power off
2950 menu-0-1-exec = menu-open-2
2951
2952 menu-1-0 = cancel
2953 menu-1-0-exec = menu-open-0
2954 menu-1-1 = reboot
2955 menu-1-1-exec = sudo reboot
2956
2957 menu-2-0 = power off
2958 menu-2-0-exec = sudo poweroff
2959 menu-2-1 = cancel
2960 menu-2-1-exec = menu-open-0
2961
2962 [module/mail]
2963 type = custom/script
2964 interval = 60
2965 format = <label>
2966 format-prefix = " "
2967 format-prefix-foreground = ${colors.foreground-alt}
2968 format-underline = #0a6cf5
2969 exec = notmuch count tag:unread
2970
2971 [settings]
2972 screenchange-reload = true
2973 ;compositing-background = xor
2974 ;compositing-background = screen
2975 ;compositing-foreground = source
2976 ;compositing-border = over
2977
2978 [global/wm]
2979 margin-top = 0
2980 margin-bottom = 0
2981
2982 ; vim:ft=dosini
2983 #+end_src
2984
2985 *** polybar-launch
2986 :PROPERTIES:
2987 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2988 :END:
2989
2990 #+begin_src sh :tangle no
2991 # Terminate already running bar instances
2992 killall -q polybar
2993
2994 # Wait until the processes have been shut down
2995 while pgrep -x polybar >/dev/null; do sleep 1; done
2996
2997 # Launch main bar
2998 polybar main &
2999
3000 echo "Bars launched..."
3001 #+end_src
3002
3003 ** PowerTOP
3004 :PROPERTIES:
3005 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
3006 :END:
3007
3008 #+begin_src conf
3009 [Unit]
3010 Description=Powertop tunings
3011
3012 [Service]
3013 ExecStart=/usr/bin/powertop --auto-tune
3014 RemainAfterExit=true
3015
3016 [Install]
3017 WantedBy=multi-user.target
3018 #+end_src
3019
3020 ** ranger
3021
3022 *** rc.conf
3023 :PROPERTIES:
3024 :header-args+: :tangle ~/.config/ranger/rc.conf
3025 :END:
3026
3027 #+begin_src conf :tangle no
3028 # ===================================================================
3029 # This file contains the default startup commands for ranger.
3030 # To change them, it is recommended to create the file
3031 # ~/.config/ranger/rc.conf and add your custom commands there.
3032 #
3033 # If you copy this whole file there, you may want to set the environment
3034 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
3035 #
3036 # The purpose of this file is mainly to define keybindings and settings.
3037 # For running more complex python code, please create a plugin in "plugins/" or
3038 # a command in "commands.py".
3039 #
3040 # Each line is a command that will be run before the user interface
3041 # is initialized. As a result, you can not use commands which rely
3042 # on the UI such as :delete or :mark.
3043 # ===================================================================
3044
3045 # ===================================================================
3046 # == Options
3047 # ===================================================================
3048
3049 # How many columns are there, and what are their relative widths?
3050 set column_ratios 1,3,4
3051
3052 # Which files should be hidden? (regular expression)
3053 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
3054
3055 # Show hidden files? You can toggle this by typing 'zh'
3056 set show_hidden false
3057
3058 # Ask for a confirmation when running the "delete" command?
3059 # Valid values are "always" (default), "never", "multiple"
3060 # With "multiple", ranger will ask only if you delete multiple files at once.
3061 set confirm_on_delete multiple
3062
3063 # Which script is used to generate file previews?
3064 # ranger ships with scope.sh, a script that calls external programs (see
3065 # README for dependencies) to preview images, archives, etc.
3066 set preview_script ~/.config/ranger/scope.sh
3067
3068 # Use the external preview script or display simple plain text previews?
3069 set use_preview_script true
3070
3071 # Open all images in this directory when running certain image viewers
3072 # like feh or sxiv? You can still open selected files by marking them.
3073 set open_all_images true
3074
3075 # Be aware of version control systems and display information.
3076 set vcs_aware false
3077
3078 # State of the three backends git, hg, bzr. The possible states are
3079 # disabled, local (only show local info), enabled (show local and remote
3080 # information).
3081 set vcs_backend_git enabled
3082 set vcs_backend_hg disabled
3083 set vcs_backend_bzr disabled
3084
3085 # Preview images in full color with the external command "w3mimgpreview"?
3086 # This requires the console web browser "w3m" and a supported terminal.
3087 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3088 set preview_images true
3089
3090 # Use a unicode "..." character to mark cut-off filenames?
3091 set unicode_ellipsis false
3092
3093 # Show dotfiles in the bookmark preview box?
3094 set show_hidden_bookmarks true
3095
3096 # Which colorscheme to use? These colorschemes are available by default:
3097 # default, jungle, snow
3098 set colorscheme default
3099
3100 # Preview files on the rightmost column?
3101 # And collapse (shrink) the last column if there is nothing to preview?
3102 set preview_files true
3103 set preview_directories true
3104 set collapse_preview true
3105
3106 # Save the console history on exit?
3107 set save_console_history true
3108
3109 # Draw the status bar on top of the browser window (default: bottom)
3110 set status_bar_on_top false
3111
3112 # Draw a progress bar in the status bar which displays the average state of all
3113 # currently running tasks which support progress bars?
3114 set draw_progress_bar_in_status_bar true
3115
3116 # Draw borders around columns?
3117 set draw_borders true
3118
3119 # Display the directory name in tabs?
3120 set dirname_in_tabs false
3121
3122 # Enable the mouse support?
3123 set mouse_enabled true
3124
3125 # Display the file size in the main column or status bar?
3126 set display_size_in_main_column true
3127 set display_size_in_status_bar true
3128
3129 # Display files tags in all columns or only in main column?
3130 set display_tags_in_all_columns true
3131
3132 # Set a title for the window?
3133 set update_title false
3134
3135 # Set the title to "ranger" in the tmux program?
3136 set update_tmux_title false
3137
3138 # Shorten the title if it gets long? The number defines how many
3139 # directories are displayed at once, 0 turns off this feature.
3140 set shorten_title 3
3141
3142 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3143 set tilde_in_titlebar false
3144
3145 # How many directory-changes or console-commands should be kept in history?
3146 set max_history_size 20
3147 set max_console_history_size 50
3148
3149 # Try to keep so much space between the top/bottom border when scrolling:
3150 set scroll_offset 8
3151
3152 # Flush the input after each key hit? (Noticable when ranger lags)
3153 set flushinput true
3154
3155 # Padding on the right when there's no preview?
3156 # This allows you to click into the space to run the file.
3157 set padding_right true
3158
3159 # Save bookmarks (used with mX and `X) instantly?
3160 # This helps to synchronize bookmarks between multiple ranger
3161 # instances but leads to *slight* performance loss.
3162 # When false, bookmarks are saved when ranger is exited.
3163 set autosave_bookmarks true
3164
3165 # You can display the "real" cumulative size of directories by using the
3166 # command :get_cumulative_size or typing "dc". The size is expensive to
3167 # calculate and will not be updated automatically. You can choose
3168 # to update it automatically though by turning on this option:
3169 set autoupdate_cumulative_size false
3170
3171 # Turning this on makes sense for screen readers:
3172 set show_cursor false
3173
3174 # One of: size, basename, mtime, type
3175 set sort natural
3176
3177 # Additional sorting options
3178 set sort_reverse false
3179 set sort_case_insensitive true
3180 set sort_directories_first true
3181
3182 # Enable this if key combinations with the Alt Key don't work for you.
3183 # (Especially on xterm)
3184 set xterm_alt_key false
3185
3186 # ===================================================================
3187 # == Local Options
3188 # ===================================================================
3189 # You can set local options that only affect a single directory.
3190
3191 # Examples:
3192 # setlocal path=~/downloads sort mtime
3193
3194 # ===================================================================
3195 # == Command Aliases in the Console
3196 # ===================================================================
3197
3198 alias e edit
3199 alias q quit
3200 alias q! quitall
3201 alias qall quitall
3202 alias setl setlocal
3203
3204 alias filter scout -prt
3205 alias find scout -aet
3206 alias mark scout -mr
3207 alias unmark scout -Mr
3208 alias search scout -rs
3209 alias search_inc scout -rts
3210 alias travel scout -aefiklst
3211
3212 # ===================================================================
3213 # == Define keys for the browser
3214 # ===================================================================
3215
3216 # Basic
3217 map Q quit!
3218 map q quit
3219 copymap q ZZ ZQ
3220
3221 map R reload_cwd
3222 map <C-r> reset
3223 map <C-l> redraw_window
3224 map <C-c> abort
3225 map <esc> change_mode normal
3226
3227 map i display_file
3228 map ? help
3229 map W display_log
3230 map w taskview_open
3231 map S shell $SHELL
3232
3233 map : console
3234 map ; console
3235 map ! console shell
3236 map @ console -p6 shell %%s
3237 map # console shell -p
3238 map s console shell
3239 map r chain draw_possible_programs; console open_with
3240 map f console find
3241 map cd console cd
3242
3243 # Tagging / Marking
3244 map t tag_toggle
3245 map ut tag_remove
3246 map "<any> tag_toggle tag=%any
3247 map <Space> mark_files toggle=True
3248 map v mark_files all=True toggle=True
3249 map uv mark_files all=True val=False
3250 map V toggle_visual_mode
3251 map uV toggle_visual_mode reverse=True
3252
3253 # For the nostalgics: Midnight Commander bindings
3254 map <F1> help
3255 map <F3> display_file
3256 map <F4> edit
3257 map <F5> copy
3258 map <F6> cut
3259 map <F7> console mkdir
3260 map <F8> console delete
3261 map <F10> exit
3262
3263 # In case you work on a keyboard with dvorak layout
3264 map <UP> move up=1
3265 map <DOWN> move down=1
3266 map <LEFT> move left=1
3267 map <RIGHT> move right=1
3268 map <HOME> move to=0
3269 map <END> move to=-1
3270 map <PAGEDOWN> move down=1 pages=True
3271 map <PAGEUP> move up=1 pages=True
3272 map <CR> move right=1
3273 map <DELETE> console delete
3274 map <INSERT> console touch
3275
3276 # VIM-like
3277 copymap <UP> k
3278 copymap <DOWN> j
3279 copymap <LEFT> h
3280 copymap <RIGHT> l
3281 copymap <HOME> gg
3282 copymap <END> G
3283 copymap <PAGEDOWN> <C-F>
3284 copymap <PAGEUP> <C-B>
3285
3286 map J move down=0.5 pages=True
3287 map K move up=0.5 pages=True
3288 copymap J <C-D>
3289 copymap K <C-U>
3290
3291 # Jumping around
3292 map H history_go -1
3293 map L history_go 1
3294 map ] move_parent 1
3295 map [ move_parent -1
3296 map } traverse
3297
3298 map gh cd ~
3299 map ge cd /etc
3300 map gu cd /usr
3301 map gd cd /dev
3302 map gl cd -r .
3303 map gL cd -r %f
3304 map go cd /opt
3305 map gv cd /var
3306 map gm cd /media
3307 map gM cd /mnt
3308 map gs cd /srv
3309 map gr cd /
3310 map gR eval fm.cd(ranger.RANGERDIR)
3311 map g/ cd /
3312 map g? cd /usr/share/doc/ranger
3313
3314 # External Programs
3315 map E edit
3316 map du shell -p du --max-depth=1 -h --apparent-size
3317 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3318 map yp shell -d echo -n %d/%f | xsel -i
3319 map yd shell -d echo -n %d | xsel -i
3320 map yn shell -d echo -n %f | xsel -i
3321
3322 # Filesystem Operations
3323 map = chmod
3324
3325 map cw console rename
3326 map A eval fm.open_console('rename ' + fm.thisfile.basename)
3327 map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3328
3329 map pp paste
3330 map po paste overwrite=True
3331 map pl paste_symlink relative=False
3332 map pL paste_symlink relative=True
3333 map phl paste_hardlink
3334 map pht paste_hardlinked_subtree
3335
3336 map dd cut
3337 map ud uncut
3338 map da cut mode=add
3339 map dr cut mode=remove
3340
3341 map yy copy
3342 map uy uncut
3343 map ya copy mode=add
3344 map yr copy mode=remove
3345
3346 # Temporary workarounds
3347 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3348 map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3349 map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3350 map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3351 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3352 map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3353 map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3354 map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3355
3356 # Searching
3357 map / console search
3358 map n search_next
3359 map N search_next forward=False
3360 map ct search_next order=tag
3361 map cs search_next order=size
3362 map ci search_next order=mimetype
3363 map cc search_next order=ctime
3364 map cm search_next order=mtime
3365 map ca search_next order=atime
3366
3367 # Tabs
3368 map <C-n> tab_new ~
3369 map <C-w> tab_close
3370 map <TAB> tab_move 1
3371 map <S-TAB> tab_move -1
3372 map <A-Right> tab_move 1
3373 map <A-Left> tab_move -1
3374 map gt tab_move 1
3375 map gT tab_move -1
3376 map gn tab_new ~
3377 map gc tab_close
3378 map uq tab_restore
3379 map <a-1> tab_open 1
3380 map <a-2> tab_open 2
3381 map <a-3> tab_open 3
3382 map <a-4> tab_open 4
3383 map <a-5> tab_open 5
3384 map <a-6> tab_open 6
3385 map <a-7> tab_open 7
3386 map <a-8> tab_open 8
3387 map <a-9> tab_open 9
3388
3389 # Sorting
3390 map or toggle_option sort_reverse
3391 map os chain set sort=size; set sort_reverse=False
3392 map ob chain set sort=basename; set sort_reverse=False
3393 map on chain set sort=natural; set sort_reverse=False
3394 map om chain set sort=mtime; set sort_reverse=False
3395 map oc chain set sort=ctime; set sort_reverse=False
3396 map oa chain set sort=atime; set sort_reverse=False
3397 map ot chain set sort=type; set sort_reverse=False
3398
3399 map oS chain set sort=size; set sort_reverse=True
3400 map oB chain set sort=basename; set sort_reverse=True
3401 map oN chain set sort=natural; set sort_reverse=True
3402 map oM chain set sort=mtime; set sort_reverse=True
3403 map oC chain set sort=ctime; set sort_reverse=True
3404 map oA chain set sort=atime; set sort_reverse=True
3405 map oT chain set sort=type; set sort_reverse=True
3406
3407 map dc get_cumulative_size
3408
3409 # Settings
3410 map zc toggle_option collapse_preview
3411 map zd toggle_option sort_directories_first
3412 map zh toggle_option show_hidden
3413 map <C-h> toggle_option show_hidden
3414 map zi toggle_option flushinput
3415 map zm toggle_option mouse_enabled
3416 map zp toggle_option preview_files
3417 map zP toggle_option preview_directories
3418 map zs toggle_option sort_case_insensitive
3419 map zu toggle_option autoupdate_cumulative_size
3420 map zv toggle_option use_preview_script
3421 map zf console filter
3422
3423 # Bookmarks
3424 map `<any> enter_bookmark %any
3425 map '<any> enter_bookmark %any
3426 map m<any> set_bookmark %any
3427 map um<any> unset_bookmark %any
3428
3429 map m<bg> draw_bookmarks
3430 copymap m<bg> um<bg> `<bg> '<bg>
3431
3432 # Generate all the chmod bindings with some python help:
3433 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3434 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3435 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3436 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3437 eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3438
3439 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3440 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3441 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3442 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3443 eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3444
3445 # ===================================================================
3446 # == Define keys for the console
3447 # ===================================================================
3448 # Note: Unmapped keys are passed directly to the console.
3449
3450 # Basic
3451 cmap <tab> eval fm.ui.console.tab()
3452 cmap <s-tab> eval fm.ui.console.tab(-1)
3453 cmap <ESC> eval fm.ui.console.close()
3454 cmap <CR> eval fm.ui.console.execute()
3455 cmap <C-l> redraw_window
3456
3457 copycmap <ESC> <C-c>
3458 copycmap <CR> <C-j>
3459
3460 # Move around
3461 cmap <up> eval fm.ui.console.history_move(-1)
3462 cmap <down> eval fm.ui.console.history_move(1)
3463 cmap <left> eval fm.ui.console.move(left=1)
3464 cmap <right> eval fm.ui.console.move(right=1)
3465 cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3466 cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3467
3468 # Line Editing
3469 cmap <backspace> eval fm.ui.console.delete(-1)
3470 cmap <delete> eval fm.ui.console.delete(0)
3471 cmap <C-w> eval fm.ui.console.delete_word()
3472 cmap <C-k> eval fm.ui.console.delete_rest(1)
3473 cmap <C-u> eval fm.ui.console.delete_rest(-1)
3474 cmap <C-y> eval fm.ui.console.paste()
3475
3476 # And of course the emacs way
3477 copycmap <up> <C-p>
3478 copycmap <down> <C-n>
3479 copycmap <left> <C-b>
3480 copycmap <right> <C-f>
3481 copycmap <home> <C-a>
3482 copycmap <end> <C-e>
3483 copycmap <delete> <C-d>
3484 copycmap <backspace> <C-h>
3485
3486 # Note: There are multiple ways to express backspaces. <backspace> (code 263)
3487 # and <backspace2> (code 127). To be sure, use both.
3488 copycmap <backspace> <backspace2>
3489
3490 # This special expression allows typing in numerals:
3491 cmap <allow_quantifiers> false
3492
3493 # ===================================================================
3494 # == Pager Keybindings
3495 # ===================================================================
3496
3497 # Movement
3498 pmap <down> pager_move down=1
3499 pmap <up> pager_move up=1
3500 pmap <left> pager_move left=4
3501 pmap <right> pager_move right=4
3502 pmap <home> pager_move to=0
3503 pmap <end> pager_move to=-1
3504 pmap <pagedown> pager_move down=1.0 pages=True
3505 pmap <pageup> pager_move up=1.0 pages=True
3506 pmap <C-d> pager_move down=0.5 pages=True
3507 pmap <C-u> pager_move up=0.5 pages=True
3508
3509 copypmap <UP> k <C-p>
3510 copypmap <DOWN> j <C-n> <CR>
3511 copypmap <LEFT> h
3512 copypmap <RIGHT> l
3513 copypmap <HOME> g
3514 copypmap <END> G
3515 copypmap <C-d> d
3516 copypmap <C-u> u
3517 copypmap <PAGEDOWN> n f <C-F> <Space>
3518 copypmap <PAGEUP> p b <C-B>
3519
3520 # Basic
3521 pmap <ESC> pager_close
3522 copypmap <ESC> q Q i <F3>
3523 pmap E edit_file
3524
3525 # ===================================================================
3526 # == Taskview Keybindings
3527 # ===================================================================
3528
3529 # Movement
3530 tmap <up> taskview_move up=1
3531 tmap <down> taskview_move down=1
3532 tmap <home> taskview_move to=0
3533 tmap <end> taskview_move to=-1
3534 tmap <pagedown> taskview_move down=1.0 pages=True
3535 tmap <pageup> taskview_move up=1.0 pages=True
3536 tmap <C-d> taskview_move down=0.5 pages=True
3537 tmap <C-u> taskview_move up=0.5 pages=True
3538
3539 copytmap <UP> k <C-p>
3540 copytmap <DOWN> j <C-n> <CR>
3541 copytmap <HOME> g
3542 copytmap <END> G
3543 copytmap <C-u> u
3544 copytmap <PAGEDOWN> n f <C-F> <Space>
3545 copytmap <PAGEUP> p b <C-B>
3546
3547 # Changing priority and deleting tasks
3548 tmap J eval -q fm.ui.taskview.task_move(-1)
3549 tmap K eval -q fm.ui.taskview.task_move(0)
3550 tmap dd eval -q fm.ui.taskview.task_remove()
3551 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3552 tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3553 tmap <delete> eval -q fm.ui.taskview.task_remove()
3554
3555 # Basic
3556 tmap <ESC> taskview_close
3557 copytmap <ESC> q Q w <C-c>
3558 #+end_src
3559
3560 *** scope.sh
3561 :PROPERTIES:
3562 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3563 :END:
3564
3565 #+begin_src sh :tangle no
3566 # ranger supports enhanced previews. If the option "use_preview_script"
3567 # is set to True and this file exists, this script will be called and its
3568 # output is displayed in ranger. ANSI color codes are supported.
3569
3570 # NOTES: This script is considered a configuration file. If you upgrade
3571 # ranger, it will be left untouched. (You must update it yourself.)
3572 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3573
3574 # Meanings of exit codes:
3575 # code | meaning | action of ranger
3576 # -----+------------+-------------------------------------------
3577 # 0 | success | success. display stdout as preview
3578 # 1 | no preview | failure. display no preview at all
3579 # 2 | plain text | display the plain content of the file
3580 # 3 | fix width | success. Don't reload when width changes
3581 # 4 | fix height | success. Don't reload when height changes
3582 # 5 | fix both | success. Don't ever reload
3583
3584 # Meaningful aliases for arguments:
3585 path="$1" # Full path of the selected file
3586 width="$2" # Width of the preview pane (number of fitting characters)
3587 height="$3" # Height of the preview pane (number of fitting characters)
3588
3589 maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3590
3591 # Find out something about the file:
3592 mimetype=$(file --mime-type -Lb "$path")
3593 extension=${path##*.}
3594
3595 # Functions:
3596 # runs a command and saves its output into $output. Useful if you need
3597 # the return value AND want to use the output in a pipe
3598 try() { output=$(eval '"$@"'); }
3599
3600 # writes the output of the previouosly used "try" command
3601 dump() { echo "$output"; }
3602
3603 # a common post-processing function used after most commands
3604 trim() { head -n "$maxln"; }
3605
3606 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3607 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3608
3609 case "$extension" in
3610 # Archive extensions:
3611 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3612 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3613 try als "$path" && { dump | trim; exit 0; }
3614 try acat "$path" && { dump | trim; exit 3; }
3615 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3616 exit 1;;
3617 rar)
3618 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3619 # PDF documents:
3620 pdf)
3621 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3622 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3623 # BitTorrent Files
3624 torrent)
3625 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3626 # HTML Pages:
3627 htm|html|xhtml)
3628 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3629 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3630 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3631 ;; # fall back to highlight/cat if the text browsers fail
3632 esac
3633
3634 case "$mimetype" in
3635 # Syntax highlight for text files:
3636 text/* | */xml)
3637 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3638 # Ascii-previews of images:
3639 image/*)
3640 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3641 # Display information about media files:
3642 video/* | audio/*)
3643 exiftool "$path" && exit 5
3644 # Use sed to remove spaces so the output fits into the narrow window
3645 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3646 esac
3647
3648 exit 1
3649 #+end_src
3650
3651 ** redshift
3652 :PROPERTIES:
3653 :header-args+: :tangle ~/.config/redshift.conf :comments none
3654 :END:
3655
3656 #+begin_src conf
3657 ; Global settings for redshift
3658 [redshift]
3659 ; Set the day and night screen temperatures (Neutral is 6500K)
3660 ;temp-day=5700
3661 ;temp-night=3500
3662
3663 ;temp-day=6500
3664 temp-day=6200
3665 ;temp-night=4800
3666 ;temp-night=5000
3667 ;temp-night=4500
3668 temp-night=4000
3669
3670 ; Enable/Disable a smooth transition between day and night
3671 ; 0 will cause a direct change from day to night screen temperature.
3672 ; 1 will gradually increase or decrease the screen temperature.
3673 transition=1
3674
3675 ; Set the screen brightness. Default is 1.0.
3676 ;brightness=0.9
3677 ; It is also possible to use different settings for day and night
3678 ; since version 1.8.
3679 ;brightness-day=0.7
3680 ;brightness-night=0.4
3681 ; Set the screen gamma (for all colors, or each color channel
3682 ; individually)
3683 ;gamma=0.8
3684 ;gamma=1.0
3685 ;gamma=0.8:0.7:0.8
3686 ; This can also be set individually for day and night since
3687 ; version 1.10.
3688 ;gamma-day=0.8:0.7:0.8
3689 ;gamma-night=0.6
3690
3691 ; Set the location-provider: 'geoclue2' or 'manual'
3692 ; type 'redshift -l list' to see possible values.
3693 ; The location provider settings are in a different section.
3694 ;location-provider=manual
3695 location-provider=geoclue2
3696
3697 ; Set the adjustment-method: 'randr', 'vidmode'
3698 ; type 'redshift -m list' to see all possible values.
3699 ; 'randr' is the preferred method, 'vidmode' is an older API.
3700 ; but works in some cases when 'randr' does not.
3701 ; The adjustment method settings are in a different section.
3702 adjustment-method=randr
3703
3704 ; Configuration of the location-provider:
3705 ; type 'redshift -l PROVIDER:help' to see the settings.
3706 ; ex: 'redshift -l manual:help'
3707 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3708 ; are negative numbers.
3709 ;[manual]
3710 ;lat=48.1
3711 ;lon=11.6
3712
3713 ; Configuration of the adjustment-method
3714 ; type 'redshift -m METHOD:help' to see the settings.
3715 ; ex: 'redshift -m randr:help'
3716 ; In this example, randr is configured to adjust screen 1.
3717 ; Note that the numbering starts from 0, so this is actually the
3718 ; second screen. If this option is not specified, Redshift will try
3719 ; to adjust _all_ screens.
3720 ;[randr]
3721 ;screen=1
3722 #+end_src
3723
3724 ** rofi
3725 :PROPERTIES:
3726 :header-args+: :tangle ~/.config/rofi/config
3727 :END:
3728
3729 #+begin_src conf
3730 ! rofi.font: Ubuntu Mono 13
3731 ! rofi.font: Inconsolata 16
3732 ! rofi.font: Iosevka 13
3733 ! rofi.font: Source Code Pro 11
3734 rofi.font: Source Code Pro 10.5
3735 rofi.modi: run,window
3736 ! rofi.width: 640
3737 rofi.width: 600
3738 !rofi.location: 2
3739 !rofi.yoffset: 200
3740 rofi.monitor: -1
3741 !rofi.lines: 10
3742
3743 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3744 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3745 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3746
3747 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3748 #+end_src
3749
3750 ** rofi-pass
3751 :PROPERTIES:
3752 :header-args+: :tangle ~/.config/rofi-pass/config
3753 :END:
3754
3755 #+begin_src conf
3756 # permanently set alternative root dir
3757 # root=/path/to/root
3758
3759 # rofi command. Make sure to have "$@" as last argument
3760 _rofi () {
3761 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3762 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3763 }
3764
3765 # xdotool needs the keyboard layout to be set using setxkbmap
3766 # You can do this in your autostart scripts (e.g. xinitrc)
3767
3768 # If for some reason, you cannot do this, you can set the command here.
3769 # and set fix_layout to true
3770 fix_layout=false
3771
3772 layout_cmd () {
3773 setxkbmap us
3774 }
3775
3776 # fields to be used
3777 URL_field='url'
3778 USERNAME_field='user'
3779 AUTOTYPE_field='autotype'
3780
3781 # delay to be used for :delay keyword
3782 delay=2
3783
3784 ## Programs to be used
3785 # Editor
3786 EDITOR='gvim -f'
3787
3788 # Browser
3789 BROWSER='chromium'
3790
3791 ## Misc settings
3792
3793 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3794 auto_enter='false'
3795 notify='false'
3796 default_autotype='user :tab pass'
3797
3798 # color of the help messages
3799 # leave empty for autodetection
3800 help_color="#4872FF"
3801
3802 # Clipboard settings
3803 # Possible options: primary, clipboard, both
3804 clip=primary
3805
3806 # Options for generating new password entries
3807 # default_user is also used for password files that have no user field.
3808 default_user=aminb
3809 default_user2=aminban
3810 password_length=30
3811
3812 # Custom Keybindings
3813 #autotype="Alt+1"
3814 autotype="Alt+m"
3815 type_user="Alt+2"
3816 type_pass="Alt+3"
3817 open_url="Alt+4"
3818 copy_name="Alt+u"
3819 copy_url="Alt+l"
3820 copy_pass="Alt+p"
3821 show="Alt+o"
3822 copy_entry="Alt+2"
3823 type_entry="Alt+1"
3824 copy_menu="Alt+c"
3825 action_menu="Alt+a"
3826 type_menu="Alt+t"
3827 help="Alt+h"
3828 switch="Alt+x"
3829 insert_pass="Alt+n"
3830 #+end_src
3831
3832 ** sway
3833
3834 *** main
3835 :PROPERTIES:
3836 :header-args+: :tangle ~/.config/sway/config
3837 :END:
3838
3839 #+begin_src conf
3840 ### Variables
3841 # super
3842 set $mod Mod4
3843 # alt
3844 set $mod2 Mod1
3845 set $left h
3846 set $down j
3847 set $up k
3848 set $right l
3849 set $term urxvt
3850 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3851
3852 ### Output configuration
3853 #
3854 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3855 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3856 #
3857 # Example configuration:
3858 #
3859 # output HDMI-A-1 resolution 1920x1080 position 1920,0
3860 #
3861 # You can get the names of your outputs by running: swaymsg -t get_outputs
3862
3863 ### Idle configuration
3864
3865 exec swayidle \
3866 timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
3867 resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
3868 before-sleep swaylock
3869
3870
3871 ### Key bindings
3872 #
3873 # Basics:
3874 #
3875 # start a terminal
3876 bindsym $mod+Return exec $term
3877
3878 # kill focused window
3879 bindsym $mod+Shift+q kill
3880
3881 # start your launcher
3882 bindsym $mod+d exec $menu
3883
3884 # password manager
3885 bindsym $mod2+space exec rofi-pass
3886
3887 # Drag floating windows by holding down $mod and left mouse button.
3888 # Resize them with right mouse button + $mod.
3889 # Despite the name, also works for non-floating windows.
3890 # Change normal to inverse to use left mouse button for resizing and right
3891 # mouse button for dragging.
3892 floating_modifier $mod normal
3893
3894 # reload the configuration file
3895 bindsym $mod+Shift+c reload
3896
3897 # exit sway (logs you out of your wayland session)
3898 bindsym $mod+Shift+e exit
3899
3900 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3901 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3902 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3903
3904 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3905 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3906 bindsym XF86AudioMute exec pamixer --toggle-mute
3907 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3908
3909 bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
3910
3911 # original sway workspace switch and window move
3912 bindsym $mod+bracketleft workspace prev
3913 bindsym $mod+bracketright workspace next
3914 bindsym $mod+braceleft move container to workspace prev
3915 bindsym $mod+braceright move container to workspace next
3916
3917 # bspwm-esque workspace switch and window move
3918 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3919 bindsym $mod2+bracketright exec sway-ws-util switch next
3920 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3921 bindsym $mod2+braceright exec sway-ws-util move next follow
3922 #
3923 # Moving around:
3924 #
3925 # Move your focus around
3926 bindsym $mod+$left focus left
3927 bindsym $mod+$down focus down
3928 bindsym $mod+$up focus up
3929 bindsym $mod+$right focus right
3930 # or use $mod+[up|down|left|right]
3931 bindsym $mod+Left focus left
3932 bindsym $mod+Down focus down
3933 bindsym $mod+Up focus up
3934 bindsym $mod+Right focus right
3935
3936 # _move_ the focused window with the same, but add Shift
3937 bindsym $mod+Shift+$left move left
3938 bindsym $mod+Shift+$down move down
3939 bindsym $mod+Shift+$up move up
3940 bindsym $mod+Shift+$right move right
3941 # ditto, with arrow keys
3942 bindsym $mod+Shift+Left move left
3943 bindsym $mod+Shift+Down move down
3944 bindsym $mod+Shift+Up move up
3945 bindsym $mod+Shift+Right move right
3946 #
3947 # Workspaces:
3948 #
3949 # switch to workspace
3950 bindsym $mod+1 workspace 1
3951 bindsym $mod+2 workspace 2
3952 bindsym $mod+3 workspace 3
3953 bindsym $mod+4 workspace 4
3954 bindsym $mod+5 workspace 5
3955 bindsym $mod+6 workspace 6
3956 bindsym $mod+7 workspace 7
3957 bindsym $mod+8 workspace 8
3958 bindsym $mod+9 workspace 9
3959 bindsym $mod+0 workspace 10
3960 # move focused container to workspace
3961 bindsym $mod+Shift+1 move container to workspace 1
3962 bindsym $mod+Shift+2 move container to workspace 2
3963 bindsym $mod+Shift+3 move container to workspace 3
3964 bindsym $mod+Shift+4 move container to workspace 4
3965 bindsym $mod+Shift+5 move container to workspace 5
3966 bindsym $mod+Shift+6 move container to workspace 6
3967 bindsym $mod+Shift+7 move container to workspace 7
3968 bindsym $mod+Shift+8 move container to workspace 8
3969 bindsym $mod+Shift+9 move container to workspace 9
3970 bindsym $mod+Shift+0 move container to workspace 10
3971 # Note: workspaces can have any name you want, not just numbers.
3972 # We just use 1-10 as the default.
3973 #
3974 # Layout stuff:
3975 #
3976 # You can "split" the current object of your focus with
3977 # $mod+b or $mod+v, for horizontal and vertical splits
3978 # respectively.
3979 bindsym $mod+b splith
3980 bindsym $mod+v splitv
3981
3982 # Switch the current container between different layout styles
3983 bindsym $mod+s layout stacking
3984 bindsym $mod+w layout tabbed
3985 bindsym $mod+e layout toggle split
3986
3987 # Make the current focus fullscreen
3988 bindsym $mod+f fullscreen
3989
3990 # Toggle the current focus between tiling and floating mode
3991 bindsym $mod+Shift+space floating toggle
3992
3993 # Swap focus between the tiling area and the floating area
3994 bindsym $mod+space focus mode_toggle
3995
3996 # move focus to the parent container
3997 bindsym $mod+a focus parent
3998 #
3999 # Scratchpad:
4000 #
4001 # Sway has a "scratchpad", which is a bag of holding for windows.
4002 # You can send windows there and get them back later.
4003
4004 # Move the currently focused window to the scratchpad
4005 bindsym $mod+Shift+minus move scratchpad
4006
4007 # Show the next scratchpad window or hide the focused scratchpad window.
4008 # If there are multiple scratchpad windows, this command cycles through them.
4009 bindsym $mod+minus scratchpad show
4010 #
4011 # Resizing containers:
4012 #
4013 mode "resize" {
4014 # left will shrink the containers width
4015 # right will grow the containers width
4016 # up will shrink the containers height
4017 # down will grow the containers height
4018 bindsym $left resize shrink width 10px
4019 bindsym $down resize grow height 10px
4020 bindsym $up resize shrink height 10px
4021 bindsym $right resize grow width 10px
4022
4023 # ditto, with arrow keys
4024 bindsym Left resize shrink width 10px
4025 bindsym Down resize grow height 10px
4026 bindsym Up resize shrink height 10px
4027 bindsym Right resize grow width 10px
4028
4029 # return to default mode
4030 bindsym Return mode "default"
4031 bindsym Escape mode "default"
4032 }
4033 bindsym $mod+Shift+r mode "resize"
4034
4035 #
4036 # Power button
4037 #
4038
4039 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
4040 mode "$mode_system" {
4041 bindsym l exec swaylock, mode "default"
4042 bindsym e exec swaymsg exit, mode "default"
4043 bindsym s exec systemctl suspend, mode "default"
4044 bindsym h exec systemctl hibernate, mode "default"
4045 bindsym r exec systemctl reboot, mode "default"
4046 bindsym Shift+s exec systemctl poweroff -i, mode "default"
4047
4048 # back to normal: Enter, Escape, or q
4049 bindsym Return mode "default"
4050 bindsym Escape mode "default"
4051 bindsym q mode "default"
4052 }
4053 bindsym XF86PowerOff mode "$mode_system"
4054
4055 #
4056 # Presentation mode
4057 #
4058
4059 bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
4060
4061 #
4062 # Notifications
4063 #
4064
4065 bindsym $mod+Shift+n mode notifications
4066 mode notifications {
4067 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
4068 bindsym d exec makoctl dismiss; mode default
4069 bindsym Shift+d exec makoctl dismiss -a; mode default
4070
4071 bindsym Escape mode default
4072 bindsym q mode default
4073 }
4074
4075 #
4076 # Screenshotting
4077 #
4078
4079 bindsym $mod+Shift+s mode screenshot
4080 mode screenshot {
4081 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4082 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4083
4084 bindsym Escape mode default
4085 bindsym q mode default
4086 }
4087
4088 #
4089 # Status Bar:
4090 #
4091 # Read `man 5 sway-bar` for more information about this section.
4092 bar {
4093 position bottom
4094 colors {
4095 statusline #ffffff
4096 background #323232
4097 inactive_workspace #32323200 #32323200 #5c5c5c
4098 }
4099 status_command i3status | my-i3status.py
4100 }
4101
4102 # font pango: benis uushi 9
4103 # font pango: Ubuntu Mono 11
4104 # font pango: Inconsolata 11
4105 font pango: DejaVu Sans Mono 9
4106 # font pango: Liberation Mono 9
4107
4108 exec xrdb .Xresources
4109 exec pgrep -x "systemd-inhibit" || \
4110 systemd-inhibit --what=handle-power-key --who=aminb \
4111 --why="Handle power button in sway" sleep infinity
4112 exec mako 2>&1 >/tmp/mako.log
4113 exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4114
4115 include /etc/sway/config.d/*
4116 include ~/.config/sway/`hostname`
4117
4118 exec systemd-notify --ready || true
4119
4120 #+end_src
4121
4122 *** langa
4123 :PROPERTIES:
4124 :header-args+: :tangle ~/.config/sway/langa
4125 :END:
4126
4127 #+begin_src conf
4128 input "2:7:SynPS/2_Synaptics_TouchPad" {
4129 events disabled
4130 dwt enabled
4131 tap enabled
4132 natural_scroll enabled
4133 click_method clickfinger
4134 }
4135
4136 input "1:1:AT_Translated_Set_2_keyboard" {
4137 repeat_delay 200
4138 repeat_rate 45
4139 xkb_layout us_ab,ir
4140 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4141 }
4142 #+end_src
4143
4144 *** shemshak
4145 :PROPERTIES:
4146 :header-args+: :tangle ~/.config/sway/shemshak
4147 :END:
4148
4149 #+begin_src conf
4150 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4151 dwt enabled
4152 tap enabled
4153 natural_scroll enabled
4154 middle_emulation enabled
4155 click_method clickfinger
4156 }
4157
4158 input "1:1:AT_Translated_Set_2_keyboard" {
4159 repeat_delay 200
4160 repeat_rate 45
4161 xkb_layout us,ir
4162 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4163 }
4164 #+end_src
4165 ** swaylock
4166 :PROPERTIES:
4167 :header-args+: :tangle ~/.config/swaylock/config
4168 :END:
4169
4170 #+begin_src conf
4171 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4172 scaling=fill
4173 #+end_src
4174
4175 ** TLP
4176
4177 *** langa
4178
4179 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4180 # ------------------------------------------------------------------------------
4181 # tlp - Parameters for power saving
4182 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4183
4184 # Hint: some features are disabled by default, remove the leading # to enable
4185 # them.
4186
4187 # Set to 0 to disable, 1 to enable TLP.
4188 TLP_ENABLE=1
4189
4190 # Operation mode when no power supply can be detected: AC, BAT.
4191 # Concerns some desktop and embedded hardware only.
4192 TLP_DEFAULT_MODE=AC
4193
4194 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4195 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4196 TLP_PERSISTENT_DEFAULT=0
4197
4198 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4199 # Non-zero value enables, zero disables laptop mode.
4200 DISK_IDLE_SECS_ON_AC=0
4201 DISK_IDLE_SECS_ON_BAT=2
4202
4203 # Dirty page values (timeouts in secs).
4204 MAX_LOST_WORK_SECS_ON_AC=15
4205 MAX_LOST_WORK_SECS_ON_BAT=60
4206
4207 # Hint: CPU parameters below are disabled by default, remove the leading #
4208 # to enable them, otherwise kernel default values are used.
4209
4210 # Select a CPU frequency scaling governor.
4211 # Intel Core i processor with intel_pstate driver:
4212 # powersave(*), performance.
4213 # Older hardware with acpi-cpufreq driver:
4214 # ondemand(*), powersave, performance, conservative, schedutil.
4215 # (*) is recommended.
4216 # Hint: use tlp-stat -p to show the active driver and available governors.
4217 # Important:
4218 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
4219 # efficient for *almost all* workloads and therefore kernel and most
4220 # distributions have chosen them as defaults. If you still want to change,
4221 # you should know what you're doing! You *must* disable your distribution's
4222 # governor settings or conflicts will occur.
4223 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4224 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4225
4226 # Set the min/max frequency available for the scaling governor.
4227 # Possible values strongly depend on your CPU. For available frequencies see
4228 # the output of tlp-stat -p.
4229 #CPU_SCALING_MIN_FREQ_ON_AC=0
4230 #CPU_SCALING_MAX_FREQ_ON_AC=0
4231 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4232 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4233
4234 # Set energy performance hints (HWP) for Intel P-state governor:
4235 # performance, balance_performance, default, balance_power, power
4236 # Values are given in order of increasing power saving.
4237 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4238 CPU_HWP_ON_AC=balance_performance
4239 CPU_HWP_ON_BAT=balance_power
4240
4241 # Set Intel P-state performance: 0..100 (%).
4242 # Limit the max/min P-state to control the power dissipation of the CPU.
4243 # Values are stated as a percentage of the available performance.
4244 # Requires an Intel Core i processor with intel_pstate driver.
4245 #CPU_MIN_PERF_ON_AC=0
4246 #CPU_MAX_PERF_ON_AC=100
4247 #CPU_MIN_PERF_ON_BAT=0
4248 #CPU_MAX_PERF_ON_BAT=30
4249
4250 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4251 # Requires an Intel Core i processor.
4252 # Important:
4253 # - This may conflict with your distribution's governor settings
4254 # - A value of 1 does *not* activate boosting, it just allows it
4255 #CPU_BOOST_ON_AC=1
4256 #CPU_BOOST_ON_BAT=0
4257
4258 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4259 # 0=disable, 1=enable.
4260 SCHED_POWERSAVE_ON_AC=0
4261 SCHED_POWERSAVE_ON_BAT=1
4262
4263 # Kernel NMI Watchdog:
4264 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
4265 NMI_WATCHDOG=0
4266
4267 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4268 # Frequency voltage pairs are written to:
4269 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4270 # CAUTION: only use this, if you thoroughly understand what you are doing!
4271 #PHC_CONTROLS="F:V F:V F:V F:V"
4272
4273 # Set CPU performance versus energy savings policy:
4274 # performance, balance-performance, default, balance-power, power.
4275 # Values are given in order of increasing power saving.
4276 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4277 ENERGY_PERF_POLICY_ON_AC=performance
4278 ENERGY_PERF_POLICY_ON_BAT=balance-power
4279
4280 # Disk devices; separate multiple devices with spaces (default: sda).
4281 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4282 DISK_DEVICES="sda sdb"
4283
4284 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4285 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4286 # Separate values for multiple disks with spaces. Use the special value 'keep'
4287 # to keep the hardware default for the particular disk.
4288 DISK_APM_LEVEL_ON_AC="254 254"
4289 DISK_APM_LEVEL_ON_BAT="128 128"
4290
4291 # Hard disk spin down timeout:
4292 # 0: spin down disabled
4293 # 1..240: timeouts from 5s to 20min (in units of 5s)
4294 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4295 # See 'man hdparm' for details.
4296 # Separate values for multiple disks with spaces. Use the special value 'keep'
4297 # to keep the hardware default for the particular disk.
4298 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4299 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4300
4301 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4302 # Separate values for multiple disks with spaces. Use the special value 'keep'
4303 # to keep the kernel default scheduler for the particular disk.
4304 #DISK_IOSCHED="cfq cfq"
4305
4306 # AHCI link power management (ALPM) for disk devices:
4307 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4308 # (*) Kernel >= 4.15 required, then recommended.
4309 # Multiple values separated with spaces are tried sequentially until success.
4310 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4311 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4312
4313 # Exclude host devices from AHCI link power management.
4314 # Separate multiple hosts with spaces.
4315 #SATA_LINKPWR_BLACKLIST="host1"
4316
4317 # Runtime Power Management for AHCI host and disks devices:
4318 # on=disable, auto=enable.
4319 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4320 #AHCI_RUNTIME_PM_ON_AC=on
4321 #AHCI_RUNTIME_PM_ON_BAT=on
4322
4323 # Seconds of inactivity before disk is suspended.
4324 AHCI_RUNTIME_PM_TIMEOUT=15
4325
4326 # PCI Express Active State Power Management (PCIe ASPM):
4327 # default, performance, powersave.
4328 PCIE_ASPM_ON_AC=performance
4329 PCIE_ASPM_ON_BAT=powersave
4330
4331 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4332 # auto = mid on BAT, high on AC; default = use hardware defaults.
4333 RADEON_POWER_PROFILE_ON_AC=high
4334 RADEON_POWER_PROFILE_ON_BAT=low
4335
4336 # Radeon dynamic power management method (DPM): battery, performance.
4337 RADEON_DPM_STATE_ON_AC=performance
4338 RADEON_DPM_STATE_ON_BAT=battery
4339
4340 # Radeon DPM performance level: auto, low, high; auto is recommended.
4341 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4342 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4343
4344 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4345 WIFI_PWR_ON_AC=off
4346 WIFI_PWR_ON_BAT=on
4347
4348 # Disable wake on LAN: Y/N.
4349 WOL_DISABLE=Y
4350
4351 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4352 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4353 SOUND_POWER_SAVE_ON_AC=0
4354 SOUND_POWER_SAVE_ON_BAT=0
4355
4356 # Disable controller too (HDA only): Y/N.
4357 SOUND_POWER_SAVE_CONTROLLER=N
4358
4359 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4360 # Drive can be powered on again by releasing (and reinserting) the eject lever
4361 # or by pressing the disc eject button on newer models.
4362 # Note: an UltraBay/MediaBay hard disk is never powered off.
4363 BAY_POWEROFF_ON_AC=0
4364 BAY_POWEROFF_ON_BAT=0
4365 # Optical drive device to power off (default sr0).
4366 BAY_DEVICE="sr0"
4367
4368 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4369 RUNTIME_PM_ON_AC=on
4370 RUNTIME_PM_ON_BAT=auto
4371
4372 # Exclude PCI(e) device adresses the following list from Runtime PM
4373 # (separate with spaces). Use lspci to get the adresses (1st column).
4374 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4375
4376 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4377 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4378 # prevents accidential power-on of dGPU in hybrid graphics setups.
4379 # Use "" to disable the feature completely.
4380 # Separate multiple drivers with spaces.
4381 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4382
4383 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4384 USB_AUTOSUSPEND=1
4385
4386 # Exclude listed devices from USB autosuspend (separate with spaces).
4387 # Use lsusb to get the ids.
4388 # Note: input devices (usbhid) are excluded automatically
4389 #USB_BLACKLIST="1111:2222 3333:4444"
4390
4391 # Bluetooth devices are excluded from USB autosuspend:
4392 # 0=do not exclude, 1=exclude.
4393 USB_BLACKLIST_BTUSB=0
4394
4395 # Phone devices are excluded from USB autosuspend:
4396 # 0=do not exclude, 1=exclude (enable charging).
4397 USB_BLACKLIST_PHONE=0
4398
4399 # Printers are excluded from USB autosuspend:
4400 # 0=do not exclude, 1=exclude.
4401 USB_BLACKLIST_PRINTER=1
4402
4403 # WWAN devices are excluded from USB autosuspend:
4404 # 0=do not exclude, 1=exclude.
4405 USB_BLACKLIST_WWAN=1
4406
4407 # Include listed devices into USB autosuspend even if already excluded
4408 # by the blacklists above (separate with spaces).
4409 # Use lsusb to get the ids.
4410 #USB_WHITELIST="1111:2222 3333:4444"
4411
4412 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4413 # (workaround for USB devices that cause shutdown problems).
4414 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4415
4416 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4417 # on system startup: 0=disable, 1=enable.
4418 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4419 # are ignored when this is enabled!
4420 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4421 RESTORE_DEVICE_STATE_ON_STARTUP=0
4422
4423 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4424 # Separate multiple devices with spaces.
4425 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4426 DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
4427
4428 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4429 # Separate multiple devices with spaces.
4430 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4431
4432 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4433 # (workaround for devices that are blocking shutdown).
4434 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4435
4436 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4437 # (to prevent other operating systems from missing radios).
4438 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4439
4440 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4441 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4442
4443 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4444 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4445
4446 # Radio devices to disable on battery when not in use (not connected):
4447 # bluetooth, wifi, wwan.
4448 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4449
4450 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4451 # required). Charging starts when the remaining capacity falls below the
4452 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4453 # Main / Internal battery (values in %)
4454 #START_CHARGE_THRESH_BAT0=75
4455 #STOP_CHARGE_THRESH_BAT0=80
4456 # Ultrabay / Slice / Replaceable battery (values in %)
4457 #START_CHARGE_THRESH_BAT1=75
4458 #STOP_CHARGE_THRESH_BAT1=80
4459
4460 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4461 #RESTORE_THRESHOLDS_ON_BAT=1
4462
4463 # ------------------------------------------------------------------------------
4464 # tlp-rdw - Parameters for the radio device wizard
4465 # Possible devices: bluetooth, wifi, wwan.
4466
4467 # Hints:
4468 # - Parameters are disabled by default, remove the leading # to enable them
4469 # - Separate multiple radio devices with spaces
4470
4471 # Radio devices to disable on connect.
4472 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4473 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4474 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4475
4476 # Radio devices to enable on disconnect.
4477 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4478 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4479 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4480
4481 # Radio devices to enable/disable when docked.
4482 #DEVICES_TO_ENABLE_ON_DOCK=""
4483 #DEVICES_TO_DISABLE_ON_DOCK=""
4484
4485 # Radio devices to enable/disable when undocked.
4486 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4487 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4488 #+end_src
4489
4490 *** shemshak
4491
4492 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
4493 # ------------------------------------------------------------------------------
4494 # tlp - Parameters for power saving
4495 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4496
4497 # Hint: some features are disabled by default, remove the leading # to enable
4498 # them.
4499
4500 # Set to 0 to disable, 1 to enable TLP.
4501 TLP_ENABLE=1
4502
4503 # Operation mode when no power supply can be detected: AC, BAT.
4504 # Concerns some desktop and embedded hardware only.
4505 TLP_DEFAULT_MODE=AC
4506
4507 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4508 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4509 TLP_PERSISTENT_DEFAULT=0
4510
4511 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4512 # Non-zero value enables, zero disables laptop mode.
4513 DISK_IDLE_SECS_ON_AC=0
4514 DISK_IDLE_SECS_ON_BAT=2
4515
4516 # Dirty page values (timeouts in secs).
4517 MAX_LOST_WORK_SECS_ON_AC=15
4518 MAX_LOST_WORK_SECS_ON_BAT=60
4519
4520 # Hint: CPU parameters below are disabled by default, remove the leading #
4521 # to enable them, otherwise kernel default values are used.
4522
4523 # Select a CPU frequency scaling governor.
4524 # Intel Core i processor with intel_pstate driver:
4525 # powersave(*), performance.
4526 # Older hardware with acpi-cpufreq driver:
4527 # ondemand(*), powersave, performance, conservative, schedutil.
4528 # (*) is recommended.
4529 # Hint: use tlp-stat -p to show the active driver and available governors.
4530 # Important:
4531 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
4532 # efficient for *almost all* workloads and therefore kernel and most
4533 # distributions have chosen them as defaults. If you still want to change,
4534 # you should know what you're doing! You *must* disable your distribution's
4535 # governor settings or conflicts will occur.
4536 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4537 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4538
4539 # Set the min/max frequency available for the scaling governor.
4540 # Possible values strongly depend on your CPU. For available frequencies see
4541 # the output of tlp-stat -p.
4542 #CPU_SCALING_MIN_FREQ_ON_AC=0
4543 #CPU_SCALING_MAX_FREQ_ON_AC=0
4544 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4545 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4546
4547 # Set energy performance hints (HWP) for Intel P-state governor:
4548 # performance, balance_performance, default, balance_power, power
4549 # Values are given in order of increasing power saving.
4550 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4551 CPU_HWP_ON_AC=balance_performance
4552 CPU_HWP_ON_BAT=balance_power
4553
4554 # Set Intel P-state performance: 0..100 (%).
4555 # Limit the max/min P-state to control the power dissipation of the CPU.
4556 # Values are stated as a percentage of the available performance.
4557 # Requires an Intel Core i processor with intel_pstate driver.
4558 #CPU_MIN_PERF_ON_AC=0
4559 #CPU_MAX_PERF_ON_AC=100
4560 #CPU_MIN_PERF_ON_BAT=0
4561 #CPU_MAX_PERF_ON_BAT=30
4562
4563 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4564 # Requires an Intel Core i processor.
4565 # Important:
4566 # - This may conflict with your distribution's governor settings
4567 # - A value of 1 does *not* activate boosting, it just allows it
4568 #CPU_BOOST_ON_AC=1
4569 #CPU_BOOST_ON_BAT=0
4570
4571 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4572 # 0=disable, 1=enable.
4573 SCHED_POWERSAVE_ON_AC=0
4574 SCHED_POWERSAVE_ON_BAT=1
4575
4576 # Kernel NMI Watchdog:
4577 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
4578 NMI_WATCHDOG=0
4579
4580 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4581 # Frequency voltage pairs are written to:
4582 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4583 # CAUTION: only use this, if you thoroughly understand what you are doing!
4584 #PHC_CONTROLS="F:V F:V F:V F:V"
4585
4586 # Set CPU performance versus energy savings policy:
4587 # performance, balance-performance, default, balance-power, power.
4588 # Values are given in order of increasing power saving.
4589 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4590 ENERGY_PERF_POLICY_ON_AC=performance
4591 ENERGY_PERF_POLICY_ON_BAT=balance-power
4592
4593 # Disk devices; separate multiple devices with spaces (default: sda).
4594 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4595 DISK_DEVICES="sda sdb"
4596
4597 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4598 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4599 # Separate values for multiple disks with spaces. Use the special value 'keep'
4600 # to keep the hardware default for the particular disk.
4601 DISK_APM_LEVEL_ON_AC="254 254"
4602 DISK_APM_LEVEL_ON_BAT="128 128"
4603
4604 # Hard disk spin down timeout:
4605 # 0: spin down disabled
4606 # 1..240: timeouts from 5s to 20min (in units of 5s)
4607 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4608 # See 'man hdparm' for details.
4609 # Separate values for multiple disks with spaces. Use the special value 'keep'
4610 # to keep the hardware default for the particular disk.
4611 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4612 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4613
4614 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4615 # Separate values for multiple disks with spaces. Use the special value 'keep'
4616 # to keep the kernel default scheduler for the particular disk.
4617 #DISK_IOSCHED="cfq cfq"
4618
4619 # AHCI link power management (ALPM) for disk devices:
4620 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4621 # (*) Kernel >= 4.15 required, then recommended.
4622 # Multiple values separated with spaces are tried sequentially until success.
4623 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4624 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4625
4626 # Exclude host devices from AHCI link power management.
4627 # Separate multiple hosts with spaces.
4628 #SATA_LINKPWR_BLACKLIST="host1"
4629
4630 # Runtime Power Management for AHCI host and disks devices:
4631 # on=disable, auto=enable.
4632 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4633 #AHCI_RUNTIME_PM_ON_AC=on
4634 #AHCI_RUNTIME_PM_ON_BAT=on
4635
4636 # Seconds of inactivity before disk is suspended.
4637 AHCI_RUNTIME_PM_TIMEOUT=15
4638
4639 # PCI Express Active State Power Management (PCIe ASPM):
4640 # default, performance, powersave.
4641 PCIE_ASPM_ON_AC=performance
4642 PCIE_ASPM_ON_BAT=powersave
4643
4644 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4645 # auto = mid on BAT, high on AC; default = use hardware defaults.
4646 RADEON_POWER_PROFILE_ON_AC=high
4647 RADEON_POWER_PROFILE_ON_BAT=low
4648
4649 # Radeon dynamic power management method (DPM): battery, performance.
4650 RADEON_DPM_STATE_ON_AC=performance
4651 RADEON_DPM_STATE_ON_BAT=battery
4652
4653 # Radeon DPM performance level: auto, low, high; auto is recommended.
4654 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4655 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4656
4657 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4658 WIFI_PWR_ON_AC=off
4659 WIFI_PWR_ON_BAT=on
4660
4661 # Disable wake on LAN: Y/N.
4662 WOL_DISABLE=Y
4663
4664 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4665 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4666 SOUND_POWER_SAVE_ON_AC=0
4667 SOUND_POWER_SAVE_ON_BAT=0
4668
4669 # Disable controller too (HDA only): Y/N.
4670 SOUND_POWER_SAVE_CONTROLLER=N
4671
4672 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4673 # Drive can be powered on again by releasing (and reinserting) the eject lever
4674 # or by pressing the disc eject button on newer models.
4675 # Note: an UltraBay/MediaBay hard disk is never powered off.
4676 BAY_POWEROFF_ON_AC=0
4677 BAY_POWEROFF_ON_BAT=0
4678 # Optical drive device to power off (default sr0).
4679 BAY_DEVICE="sr0"
4680
4681 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4682 RUNTIME_PM_ON_AC=on
4683 RUNTIME_PM_ON_BAT=auto
4684
4685 # Exclude PCI(e) device adresses the following list from Runtime PM
4686 # (separate with spaces). Use lspci to get the adresses (1st column).
4687 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4688 RUNTIME_PM_BLACKLIST="01:00.0"
4689
4690 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4691 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4692 # prevents accidential power-on of dGPU in hybrid graphics setups.
4693 # Use "" to disable the feature completely.
4694 # Separate multiple drivers with spaces.
4695 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4696
4697 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4698 USB_AUTOSUSPEND=1
4699
4700 # Exclude listed devices from USB autosuspend (separate with spaces).
4701 # Use lsusb to get the ids.
4702 # Note: input devices (usbhid) are excluded automatically
4703 #USB_BLACKLIST="1111:2222 3333:4444"
4704
4705 # Bluetooth devices are excluded from USB autosuspend:
4706 # 0=do not exclude, 1=exclude.
4707 USB_BLACKLIST_BTUSB=0
4708
4709 # Phone devices are excluded from USB autosuspend:
4710 # 0=do not exclude, 1=exclude (enable charging).
4711 USB_BLACKLIST_PHONE=0
4712
4713 # Printers are excluded from USB autosuspend:
4714 # 0=do not exclude, 1=exclude.
4715 USB_BLACKLIST_PRINTER=1
4716
4717 # WWAN devices are excluded from USB autosuspend:
4718 # 0=do not exclude, 1=exclude.
4719 USB_BLACKLIST_WWAN=1
4720
4721 # Include listed devices into USB autosuspend even if already excluded
4722 # by the blacklists above (separate with spaces).
4723 # Use lsusb to get the ids.
4724 #USB_WHITELIST="1111:2222 3333:4444"
4725
4726 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4727 # (workaround for USB devices that cause shutdown problems).
4728 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4729
4730 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4731 # on system startup: 0=disable, 1=enable.
4732 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4733 # are ignored when this is enabled!
4734 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4735 RESTORE_DEVICE_STATE_ON_STARTUP=1
4736
4737 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4738 # Separate multiple devices with spaces.
4739 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4740
4741 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4742 # Separate multiple devices with spaces.
4743 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4744
4745 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4746 # (workaround for devices that are blocking shutdown).
4747 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4748
4749 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4750 # (to prevent other operating systems from missing radios).
4751 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4752
4753 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4754 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4755
4756 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4757 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4758
4759 # Radio devices to disable on battery when not in use (not connected):
4760 # bluetooth, wifi, wwan.
4761 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4762
4763 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4764 # required). Charging starts when the remaining capacity falls below the
4765 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4766 # Main / Internal battery (values in %)
4767 #START_CHARGE_THRESH_BAT0=75
4768 #STOP_CHARGE_THRESH_BAT0=80
4769 # Ultrabay / Slice / Replaceable battery (values in %)
4770 #START_CHARGE_THRESH_BAT1=75
4771 #STOP_CHARGE_THRESH_BAT1=80
4772
4773 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4774 #RESTORE_THRESHOLDS_ON_BAT=1
4775
4776 # ------------------------------------------------------------------------------
4777 # tlp-rdw - Parameters for the radio device wizard
4778 # Possible devices: bluetooth, wifi, wwan.
4779
4780 # Hints:
4781 # - Parameters are disabled by default, remove the leading # to enable them
4782 # - Separate multiple radio devices with spaces
4783
4784 # Radio devices to disable on connect.
4785 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4786 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4787 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4788
4789 # Radio devices to enable on disconnect.
4790 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4791 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4792 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4793
4794 # Radio devices to enable/disable when docked.
4795 #DEVICES_TO_ENABLE_ON_DOCK=""
4796 #DEVICES_TO_DISABLE_ON_DOCK=""
4797
4798 # Radio devices to enable/disable when undocked.
4799 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4800 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4801 #+end_src
4802
4803 ** X
4804
4805 *** xprofile
4806 :PROPERTIES:
4807 :header-args+: :tangle ~/.xprofile
4808 :END:
4809
4810 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4811 contrary, it's automatically sourced by LightDM, my display manager of
4812 choice.
4813
4814 #+begin_src sh :tangle no
4815 xset -b # disable bell
4816 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4817
4818 # setxkbmap -option compose:ralt
4819
4820 setxkbmap -option ctrl:nocaps # turn capslock into control
4821 setxkbmap -option altwin:swap_alt_win # swap alt and super
4822
4823 if [ $(hostname) = "plasma" ]
4824 then
4825 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4826 fi
4827
4828 if [ $(hostname) = "enigma" ]
4829 then
4830 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4831 fi
4832
4833 light -Scrs "intel_backlight" 2
4834
4835 source $HOME/.zprofile
4836
4837 export _JAVA_AWT_WM_NONREPARENTING=1
4838 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4839
4840 if [ $(hostname) = "plasma" ]
4841 then
4842 unlock-def-gk.py &
4843 fi
4844
4845 bspwm &
4846 #+end_src
4847
4848 *** X resources
4849
4850 **** Xresources
4851 :PROPERTIES:
4852 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4853 :END:
4854
4855 #+begin_src conf-xdefaults
4856 #include ".Xresources.d/fonts"
4857 ! #include ".Xresources.d/colors"
4858 #include ".Xresources.d/emacs"
4859 #include ".Xresources.d/rxvt-unicode"
4860 #+end_src
4861
4862 **** Xresources.d
4863
4864 ***** fonts
4865 :PROPERTIES:
4866 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4867 :END:
4868
4869 #+begin_src conf-xdefaults
4870 Xft.lcdfilter: lcddefault
4871 Xft.antialias: true
4872 Xft.autohint: 0
4873 Xft.hinting: true
4874 Xft.hintstyle: hintslight
4875 ! Xft.hintstyle: hintfull
4876 Xft.rgba: rgb
4877 Xft.dpi: 96
4878 #+end_src
4879
4880 ***** colors
4881 :PROPERTIES:
4882 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4883 :END:
4884
4885 #+begin_src conf-xdefaults :tangle no
4886 #include "gruvbox-light.xresources"
4887 ! #include "gruvbox-dark.xresources"
4888 #include "gruvbox-urxvt256.xresources"
4889 #+end_src
4890
4891 #+begin_src conf-xdefaults :tangle no
4892 ! -----------------------------------------------------------------------------
4893 ! File: gruvbox-light.xresources
4894 ! Description: Retro groove colorscheme generalized
4895 ! Author: morhetz <morhetz@gmail.com>
4896 ! Source: https://github.com/morhetz/gruvbox-generalized
4897 ! Last Modified: 6 Sep 2014
4898 ! -----------------------------------------------------------------------------
4899
4900 ! hard contrast: *background: #f9f5d7
4901 *background: #fbf1c7
4902 ! soft contrast: *background: #f2e5bc
4903 *foreground: #3c3836
4904 ! Black + DarkGrey
4905 *color0: #fdf4c1
4906 *color8: #928374
4907 ! DarkRed + Red
4908 *color1: #cc241d
4909 *color9: #9d0006
4910 ! DarkGreen + Green
4911 *color2: #98971a
4912 *color10: #79740e
4913 ! DarkYellow + Yellow
4914 *color3: #d79921
4915 *color11: #b57614
4916 ! DarkBlue + Blue
4917 *color4: #458588
4918 *color12: #076678
4919 ! DarkMagenta + Magenta
4920 *color5: #b16286
4921 *color13: #8f3f71
4922 ! DarkCyan + Cyan
4923 *color6: #689d6a
4924 *color14: #427b58
4925 ! LightGrey + White
4926 *color7: #7c6f64
4927 *color15: #3c3836
4928 #+end_src
4929
4930 #+begin_src conf-xdefaults :tangle no
4931 ! -----------------------------------------------------------------------------
4932 ! File: gruvbox-dark.xresources
4933 ! Description: Retro groove colorscheme generalized
4934 ! Author: morhetz <morhetz@gmail.com>
4935 ! Source: https://github.com/morhetz/gruvbox-generalized
4936 ! Last Modified: 6 Sep 2014
4937 ! -----------------------------------------------------------------------------
4938
4939 ! hard contrast: *background: #1d2021
4940 *background: #282828
4941 ! soft contrast: *background: #32302f
4942 *foreground: #ebdbb2
4943 ! Black + DarkGrey
4944 *color0: #282828
4945 *color8: #928374
4946 ! DarkRed + Red
4947 *color1: #cc241d
4948 *color9: #fb4934
4949 ! DarkGreen + Green
4950 *color2: #98971a
4951 *color10: #b8bb26
4952 ! DarkYellow + Yellow
4953 *color3: #d79921
4954 *color11: #fabd2f
4955 ! DarkBlue + Blue
4956 *color4: #458588
4957 *color12: #83a598
4958 ! DarkMagenta + Magenta
4959 *color5: #b16286
4960 *color13: #d3869b
4961 ! DarkCyan + Cyan
4962 *color6: #689d6a
4963 *color14: #8ec07c
4964 ! LightGrey + White
4965 *color7: #a89984
4966 *color15: #ebdbb2
4967 #+end_src
4968
4969 #+begin_src conf-xdefaults :tangle no
4970 ! -----------------------------------------------------------------------------
4971 ! File: gruvbox-urxvt256.xresources
4972 ! Description: Retro groove colorscheme generalized
4973 ! Author: morhetz <morhetz@gmail.com>
4974 ! Source: https://github.com/morhetz/gruvbox-generalized
4975 ! Last Modified: 13 Dec 2013
4976 ! -----------------------------------------------------------------------------
4977
4978 URxvt.color24: #076678
4979 URxvt.color66: #427b58
4980 URxvt.color88: #9d0006
4981 URxvt.color96: #8f3f71
4982 URxvt.color100: #79740e
4983 URxvt.color108: #8ec07c
4984 URxvt.color109: #83a598
4985 URxvt.color130: #af3a03
4986 URxvt.color136: #b57614
4987 URxvt.color142: #b8bb26
4988 URxvt.color167: #fb4934
4989 URxvt.color175: #d3869b
4990 URxvt.color208: #fe8019
4991 URxvt.color214: #fabd2f
4992 URxvt.color223: #ebdbb2
4993 URxvt.color228: #f2e5bc
4994 URxvt.color229: #fbf1c7
4995 URxvt.color230: #f9f5d7
4996 URxvt.color234: #1d2021
4997 URxvt.color235: #282828
4998 URxvt.color236: #32302f
4999 URxvt.color237: #3c3836
5000 URxvt.color239: #504945
5001 URxvt.color241: #665c54
5002 URxvt.color243: #7c6f64
5003 URxvt.color244: #928374
5004 URxvt.color245: #928374
5005 URxvt.color246: #a89984
5006 URxvt.color248: #bdae93
5007 URxvt.color250: #d5c4a1
5008 #+end_src
5009
5010 ***** emacs
5011 :PROPERTIES:
5012 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
5013 :END:
5014
5015 #+begin_src conf-xdefaults
5016 Emacs.menuBar: off
5017 Emacs.toolBar: off
5018 Emacs.verticalScrollBars: off
5019 Emacs.cursorBlink: off
5020 Emacs.FontBackend: xft,x
5021 ! Emacs.font: Ubuntu Mono-12
5022 ! Emacs.font: Triplicate T4C-11
5023 ! Emacs.font: Ubuntu Mono-10.5
5024 ! Emacs.font: Ubuntu Mono-12
5025 ! Emacs.font: Iosevka-11
5026
5027 ! Emacs.font: Fira Mono:size=15
5028 ! Emacs.font: DejaVu Sans Mono:size=15
5029 ! Emacs.font: Inconsolata:size=17
5030 ! Emacs.font: Inconsolata:size=16
5031 ! Emacs.font: Inconsolata LGC:size=14
5032 ! Emacs.font: Source Code Pro Medium-10.5
5033 Emacs.font: Source Code Pro:size=14
5034 ! Emacs.font: Ubuntu Mono:size=16
5035 ! Emacs.font: Iosevka:size=16
5036 #+end_src
5037
5038 ***** rxvt-unicode
5039 :PROPERTIES:
5040 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
5041 :END:
5042
5043 #+begin_src conf-xdefaults
5044 ! Font
5045 URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
5046 URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
5047 URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
5048 URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
5049
5050 URxvt.xftAntialias: true
5051 URxvt.letterSpace: 0
5052
5053 URxvt.depth: 0
5054 URxvt.loginShell: true
5055 URxvt.saveLines: 100000
5056 URxvt.internalBorder: 3
5057 URxvt.lineSpace: 0
5058 URxvt.scrollBar: false
5059 URxvt.scrollStyle: rxvt
5060 URxvt*scrollTtyOutput: false
5061 URxvt*scrollWithBuffer: true
5062 URxvt*scrollTtyKeypress: true
5063 URxvt.keysym.Shift-Up: command:\033]720;1\007
5064 URxvt.keysym.Shift-Down: command:\033]721;1\007
5065
5066 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
5067 URxvt.url-select.launcher: firefox
5068 URxvt.url-select.underline: true
5069 URxvt.keysym.M-u: perl:url-select:select_next
5070 URxvt.keysym.M-Escape: perl:keyboard-select:activate
5071 URxvt.keysym.M-s: perl:keyboard-select:search
5072 URxvt.url-launcher: /usr/bin/firefox
5073 URxvt.matcher.button: 1
5074 URxvt.iso14755: false
5075 URxvt.iso14755_53: false
5076 URxvt.keysym.M-c: perl:clipboard:copy
5077 URxvt.keysym.M-v: perl:clipboard:paste
5078 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
5079 URxvt.keysym.C-Up: font-size:increase
5080 URxvt.keysym.C-Down: font-size:decrease
5081 URxvt.keysym.C-S-Up: font-size:incglobal
5082 URxvt.keysym.C-S-Down: font-size:decglobal
5083 URxvt.keysym.C-equal: font-size:reset
5084 !URxvt.keysym.C-question: font-size:show
5085
5086 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5087
5088 !urxvt*foreground: white
5089 !urxvt*background: black
5090
5091 !*color0: #2E3436
5092 !*color1: #a40000
5093 !*color2: #4E9A06
5094 !*color3: #C4A000
5095 !*color4: #3465A4
5096 !*color5: #75507B
5097 !*color6: #ce5c00
5098 !*color7: #babdb9
5099 !*color8: #555753
5100 !*color9: #EF2929
5101 !*color10: #8AE234
5102 !*color11: #FCE94F
5103 !*color12: #729FCF
5104 !*color13: #AD7FA8
5105 !*color14: #fcaf3e
5106 !*color15: #EEEEEC
5107
5108 !URxvt.foreground: #C8C8C8
5109 !URxvt.background: #FFFFFF
5110
5111 !! black
5112 !*color0: #2E3436
5113 !*color8: #555753
5114 !! red
5115 !*color1: #a40000
5116 !*color9: #EF2929
5117 !! green
5118 !*color2: #4E9A06
5119 !*color10: #8AE234
5120 !! yellow
5121 !*color3: #C4A000
5122 !*color11: #FCE94F
5123 !! blue
5124 !*color4: #3465A4
5125 !*color12: #729FCF
5126 !! purple
5127 !*color5: #75507B
5128 !*color13: #AD7FA8
5129 !! orange (replaces cyan)
5130 !*color6: #ce5c00
5131 !*color14: #fcaf3e
5132 !! white
5133 !*color7: #babdb9
5134 !*color15: #EEEEEC
5135
5136 ! Tango colour theme for rxvt-unicode
5137 URxvt.background: #FFFFFF
5138 URxvt.foreground: #000000
5139
5140 ! Black
5141 URxvt.color0: #2E3436
5142 URxvt.color8: #757773
5143
5144 ! Red
5145 URxvt.color1: #CC0000
5146 URxvt.color9: #EF2929
5147
5148 ! Green
5149 URxvt.color2: #4E9A06
5150 URxvt.color10: #8AE234
5151
5152 ! Yellow
5153 URxvt.color3: #C4A000
5154 URxvt.color11: #FCE94F
5155
5156 ! Blue
5157 URxvt.color4: #3465A4
5158 URxvt.color12: #729FCF
5159
5160 ! Magenta
5161 URxvt.color5: #75507B
5162 URxvt.color13: #AD7FA8
5163
5164 !! Cyan
5165 !URxvt.color6: #06989A
5166 !URxvt.color14: #34E2E2
5167 ! orange (replaces cyan)
5168 ,*color6: #ce5c00
5169 ,*color14: #fcaf3e
5170
5171 ! White
5172 URxvt.color7: #D3D7CF
5173 URxvt.color15: #EEEEEC
5174 #+end_src
5175
5176 *** xkb us_ab keyboard layout
5177
5178 #+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5179 default partial alphanumeric_keys
5180 xkb_symbols "us_ab" {
5181 include "us(basic)"
5182 name[Group1]= "English (US)(aminb)";
5183
5184 key <MENU> { [ Alt_R ] };
5185 };
5186 #+end_src
5187
5188 ** XDG
5189 :PROPERTIES:
5190 :header-args+: :tangle ~/.config/user-dirs.dirs
5191 :END:
5192
5193 #+begin_src conf
5194 XDG_DESKTOP_DIR="$HOME/Desktop"
5195 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5196 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5197 XDG_MUSIC_DIR="$HOME/usr/music"
5198 XDG_PICTURES_DIR="$HOME/usr/pics"
5199 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5200 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5201 XDG_VIDEOS_DIR="$HOME/usr/vids"
5202 #+end_src
5203
5204 ** Zathura
5205 :PROPERTIES:
5206 :header-args+: :tangle ~/.config/zathura/zathurarc
5207 :END:
5208
5209 #+begin_src conf
5210 set smooth-scroll true
5211 set selection-clipboard clipboard
5212 set zoom-step 05
5213 set default-bg "#272727"
5214 set statusbar-bg "#272727"
5215 set inputbar-bg "#373737"
5216 #+end_src
5217
5218 ** Zsh
5219
5220 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5221 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5222 installed.
5223
5224 *** zimrc
5225 :PROPERTIES:
5226 :header-args+: :tangle ~/.zimrc
5227 :END:
5228
5229 #+begin_src sh
5230
5231
5232 #################
5233 # CORE SETTINGS #
5234 #################
5235
5236 #
5237 # Zim settings
5238 #
5239
5240 # Select what modules you would like enabled.
5241 # The second line of modules may depend on options set by modules in the first
5242 # line. These dependencies are noted on the respective module's README.md.
5243 zmodules=(directory environment git git-info history input ssh utility custom \
5244 syntax-highlighting history-substring-search prompt completion)
5245
5246
5247 ###################
5248 # MODULE SETTINGS #
5249 ###################
5250
5251 #
5252 # Prompt
5253 #
5254
5255 # Set your desired prompt here
5256 zprompt_theme='pure'
5257 #PURE_PROMPT_SYMBOL=λ
5258 #PURE_PROMPT_SYMBOL=δ
5259 PURE_PROMPT_SYMBOL=➜
5260
5261 #
5262 # Completion
5263 #
5264
5265 # set an optional host-specific filename for the completion cache file
5266 # if none is provided, the default '.zcompdump' is used.
5267 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5268
5269 #
5270 # Utility
5271 #
5272
5273 # Uncomment to enable command correction prompts
5274 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5275 setopt CORRECT
5276
5277 #
5278 # Environment
5279 #
5280
5281 # Set the string below to the desired terminal title format string.
5282 # The terminal title is redrawn upon directory change, however, variables like
5283 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5284 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5285 # The example below uses the following format: 'username@host:/current/directory'
5286 ztermtitle='%n@%m:%~'
5287
5288 #
5289 # Input
5290 #
5291
5292 # Uncomment to enable double-dot expansion.
5293 # This appends '../' to your input for each '.' you type after an initial '..'
5294 #zdouble_dot_expand='true'
5295
5296 #
5297 # Syntax-Highlighting
5298 #
5299
5300 # This determines what highlighters will be used with the syntax-highlighting module.
5301 # Documentation of the highlighters can be found here:
5302 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5303 # For (u)rxvt, termite and gnome-terminal users,
5304 # removing the 'cursor' highlighter will fix the disappearing cursor problem
5305 #zhighlighters=(main brackets cursor)
5306 zhighlighters=(main brackets pattern)
5307
5308
5309 #
5310 # SSH
5311 #
5312
5313 # Load these ssh identities with the ssh module
5314 zssh_ids=(id_ed25519_bandali)
5315
5316
5317 #
5318 # Pacman
5319 #
5320
5321 # Set (optional) pacman front-end.
5322 zpacman_frontend='yay'
5323
5324 # Load any helper scripts as defined here
5325 #zpacman_helper=(aur)
5326 #+end_src
5327
5328 *** zlogin
5329 :PROPERTIES:
5330 :header-args+: :tangle ~/.zlogin
5331 :END:
5332
5333 #+begin_src sh
5334
5335
5336 #
5337 # User configuration sourced by login shells
5338 #
5339
5340 # Initialize zim
5341 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5342 #+end_src
5343
5344 *** zprofile
5345 :PROPERTIES:
5346 :header-args+: :tangle ~/.zprofile
5347 :END:
5348
5349 #+begin_src sh
5350 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5351 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
5352 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
5353 export XDG_CONFIG_HOME=$HOME/.config
5354 export XDG_DATA_HOME=$HOME/.local/share
5355 export XDG_DATA_DIRS=/usr/local/share:/usr/share
5356 export MAILDIR="$HOME/mail"
5357 export CVS_RSH=ssh
5358 #export MATHMODELS=$HOME/src/eiffel/mathmodels
5359 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5360 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5361
5362 # Eiffel2Java stuff
5363 #export JAVA_HOME=/usr/lib/jvm/default
5364 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5365 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5366 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5367
5368 #export PATH="$HOME/usr/build/pvs:$PATH"
5369 #export SBCLISP_HOME=/usr/share/sbcl-source
5370 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5371
5372 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
5373
5374 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5375 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5376
5377 export NIXPKGS=$HOME/src/git/nixpkgs
5378
5379 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
5380 #+end_src
5381
5382 *** zshenv
5383 :PROPERTIES:
5384 :header-args+: :tangle ~/.zshenv
5385 :END:
5386
5387 #+begin_src sh
5388 # Ensure that a non-login, non-interactive shell has a defined environment.
5389 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5390 source "${ZDOTDIR:-$HOME}/.zprofile"
5391 fi
5392 #+end_src
5393
5394 *** zshrc
5395 :PROPERTIES:
5396 :header-args+: :tangle ~/.zshrc
5397 :END:
5398
5399 #+begin_src sh
5400 # Bash-like navigation
5401 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5402 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5403 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5404 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
5405
5406 #disable -r time # disable shell reserved word
5407 #alias time='time -p' # -p for POSIX output
5408
5409 # rehash if last command was pacaur or pacman
5410 # (so that zsh picks up changes in $PATH immediately)
5411 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5412
5413 #
5414 # User configuration sourced by interactive shells
5415 #
5416
5417 # Change default zim location
5418 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5419
5420 # Start zim
5421 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5422
5423 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5424 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5425
5426 setopt globdots
5427
5428 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
5429 # source ~/.zsh/zsh-autopair/autopair.zsh
5430
5431
5432 ### fzf ###
5433
5434 source /usr/share/fzf/key-bindings.zsh
5435 source /usr/share/fzf/completion.zsh
5436
5437 # Accept history selection instead of putting it on
5438 # the command line
5439 fzf-history-widget-accept() {
5440 fzf-history-widget
5441 zle accept-line
5442 }
5443 #zle -N fzf-history-widget-accept
5444 #bindkey '^R' fzf-history-widget-accept
5445
5446 # alt+c preview
5447 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5448
5449 ### fzf ###
5450
5451
5452 # aliases
5453 alias mpv="mpv --ytdl-format mp4"
5454 alias mv="mv -iv"
5455 alias cp="cp -iv"
5456 alias scl=systemctl
5457 alias jcl=journalctl
5458 alias m="mbsync uwaterloo; mbsync amin"
5459 alias best="youtube-dl -f best"
5460 alias sd="ssh deb"
5461 alias sf="ssh fp"
5462 alias sn="ssh nix"
5463
5464 aur() {
5465 cd ~/usr/build
5466 git clone https://aur.archlinux.org/${1}.git
5467 cd ${1}
5468 }
5469
5470 # i-beam cursor
5471 echo -e "\033[5 q"
5472 #echo -e "\033[6 q"
5473 #+end_src
5474
5475 * Scripts
5476
5477 This section contains various useful scripts and the ones used by the
5478 programs above. For instance, =toggle-tablet= for switching to and
5479 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5480 Xfce's presentation mode which keeps the screen awake, and
5481 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5482 exact brightness value.
5483
5484 ** battery-percentage-time
5485 :PROPERTIES:
5486 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
5487 :END:
5488
5489 #+begin_src sh :tangle no
5490 dbus_send() {
5491 label=$1
5492 dbus-send --print-reply=literal --system \
5493 --dest=org.freedesktop.UPower \
5494 /org/freedesktop/UPower/devices/battery_BAT0 \
5495 org.freedesktop.DBus.Properties.Get \
5496 string:org.freedesktop.UPower.Device \
5497 string:"${label}" | awk '{print $3}'
5498 }
5499
5500 perc=$(dbus_send 'Percentage')
5501 state=$(dbus_send 'State')
5502
5503 if [ "$state" -eq 2 ]; then # Discharging
5504 secs=$(dbus_send 'TimeToEmpty')
5505 elif [ "$state" -eq 1 ]; then # Charging
5506 secs=$(dbus_send 'TimeToFull')
5507 fi
5508
5509 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5510 #+end_src
5511
5512 ** my-i3status.py
5513 :PROPERTIES:
5514 :header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
5515 :END:
5516
5517 #+begin_src python :comments none
5518 # -*- coding: utf-8 -*-
5519
5520 # This script is a simple wrapper which prefixes each i3status line with custom
5521 # information. It is based on:
5522 # https://github.com/i3/i3status/blob/master/contrib/wrapper.py
5523 #
5524 # In ~/.i3status.conf, add the following line:
5525 # output_format = "i3bar"
5526 # in the 'general' section.
5527 # Then, in ~/.config/i3/config or ~/.config/sway/config add:
5528 # status_command i3status | my-i3status.py
5529 # in the 'bar' section. Make sure my-i3status.py is in $PATH.
5530 #
5531 # © 2012 Valentin Haenel <valentin.haenel@gmx.de>
5532 # © 2018 Amin Bandali <bandali@gnu.org>
5533 #
5534 # This program is free software. It comes without any warranty, to the extent
5535 # permitted by applicable law. You can redistribute it and/or modify it under
5536 # the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
5537 # 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
5538 # details.
5539
5540 import sys
5541 import json
5542 import os
5543
5544 def get_nosleep():
5545 """ Return true if ~/.nosleep exists. """
5546 return os.path.isfile(os.path.expanduser("~/.nosleep"))
5547
5548 def print_line(message):
5549 """ Non-buffered printing to stdout. """
5550 sys.stdout.write(message + '\n')
5551 sys.stdout.flush()
5552
5553 def read_line():
5554 """ Interrupted respecting reader for stdin. """
5555 # try reading a line, removing any extra whitespace
5556 try:
5557 line = sys.stdin.readline().strip()
5558 # i3status sends EOF, or an empty line
5559 if not line:
5560 sys.exit(3)
5561 return line
5562 # exit on ctrl-c
5563 except KeyboardInterrupt:
5564 sys.exit()
5565
5566 if __name__ == '__main__':
5567 # Skip the first line which contains the version header.
5568 print_line(read_line())
5569
5570 # The second line contains the start of the infinite array.
5571 print_line(read_line())
5572
5573 while True:
5574 line, prefix = read_line(), ''
5575 # ignore comma at start of lines
5576 if line.startswith(','):
5577 line, prefix = line[1:], ','
5578
5579 if get_nosleep():
5580 j = json.loads(line)
5581 # insert information into the start of the json, but could be anywhere
5582 j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
5583 # and echo back new encoded json
5584 print_line(prefix+json.dumps(j))
5585 else:
5586 print_line(prefix+line)
5587 #+end_src
5588
5589 ** rofi-light
5590 :PROPERTIES:
5591 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5592 :END:
5593
5594 #+begin_src bash
5595 cur=$(light -G)
5596 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
5597 [ -n "$val" ] && light -S $val
5598 #+end_src
5599
5600 ** rofi-remmina.py
5601 :PROPERTIES:
5602 :header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
5603 :END:
5604
5605 #+begin_src python
5606 import ConfigParser
5607 import os
5608 from subprocess import Popen, PIPE
5609
5610 remmina_dir = os.path.expanduser("~/.local/share/remmina")
5611
5612 fdict = dict()
5613
5614 for f in os.listdir(remmina_dir):
5615 fp = os.path.join(remmina_dir, f)
5616 c = ConfigParser.ConfigParser()
5617 c.read(fp)
5618 n = c.get('remmina', 'name')
5619 fdict[n] = fp
5620
5621 lines = max(min(15, len(fdict)), 1);
5622 width = len(max(fdict.keys(), key=len))
5623 rofi = Popen(["rofi", "-i", "-dmenu", \
5624 "-l", str(lines), "-width", str(width), \
5625 "-p", "connection"], stdout=PIPE, stdin=PIPE)
5626 selected = rofi.communicate("\n" \
5627 .join(fdict.keys()) \
5628 .encode("utf-8"))[0] \
5629 .decode("utf-8") \
5630 .strip()
5631 rofi.wait()
5632
5633 r = Popen(["remmina", "-c", fdict[selected]])
5634 r.wait()
5635 #+end_src
5636
5637 ** s (run sway)
5638 :PROPERTIES:
5639 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5640 :END:
5641
5642 #+begin_src bash
5643 export _JAVA_AWT_WM_NONREPARENTING=1
5644 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5645 light -Nr 2
5646 source $HOME/.zprofile
5647 sway
5648 #+end_src
5649
5650 ** sway-ws-util
5651 :PROPERTIES:
5652 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5653 :END:
5654
5655 #+begin_src bash
5656 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5657 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5658 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5659 dest_ws=-1
5660 op=-1
5661
5662 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5663 op="$1"
5664 if [ "$2" = "prev" ]; then
5665 dest_ws="$prev_ws"
5666 elif [ "$2" = "next" ]; then
5667 dest_ws="$next_ws"
5668 else
5669 echo "Usage: $0 $1 {prev|next} [follow]"
5670 exit 1
5671 fi
5672 else
5673 echo "Usage: $0 {switch|move} {prev|next} [follow]"
5674 exit 1
5675 fi
5676
5677 if [ "$op" = "switch" ]; then
5678 sway workspace "$dest_ws"
5679 elif [ "$op" = "move" ]; then
5680 sway move container to workspace "$dest_ws"
5681 if [ "$3" = "follow" ]; then
5682 sway workspace "$dest_ws"
5683 fi
5684 fi
5685 #+end_src
5686
5687 ** toggle-layout
5688 :PROPERTIES:
5689 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5690 :END:
5691
5692 #+begin_src bash :tangle no
5693 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5694
5695 if [ "$lang" = "us" ]; then
5696 setxkbmap ir
5697 else
5698 setxkbmap us
5699 # xmodmap $HOME/.Xmodmap
5700 fi
5701 #+end_src
5702
5703 ** toggle-presentation-mode
5704 :PROPERTIES:
5705 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5706 :END:
5707
5708 #+begin_src bash :tangle no
5709 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5710 #+end_src
5711
5712 ** toggle-tablet
5713 :PROPERTIES:
5714 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5715 :END:
5716
5717 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5718 a few things:
5719
5720 - rotates the screen using =xrandr=, so that rotating the physical
5721 display of my X220t would have the laptop's battery on the right
5722 hand side,
5723 - enables touch screen,
5724 - properly rotates the stylus pen and touch screen pointers, and
5725 - toggles between RGB and Vertical BGR sub-pixel order.
5726
5727 #+begin_src bash :tangle no
5728 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5729 0) # Screen is not rotated, we should rotate it right (90°)
5730 xrandr -o 3
5731 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5732 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5733 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5734 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5735 ;;
5736 1) # Currently top is rotated right, we should set it normal (0°)
5737 xrandr -o 0
5738 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5739 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5740 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5741 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5742 ;;
5743 *)
5744 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5745 exit 1
5746 ;;
5747 esac
5748 #+end_src
5749
5750 ** unlock-def-gk.py
5751 :PROPERTIES:
5752 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5753 :END:
5754
5755 #+begin_src python :tangle no
5756 import gnomekeyring as gk
5757 # list_item_ids_sync('login')[0] == 1L
5758 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5759 #+end_src
5760
5761 ** volume-info
5762 :PROPERTIES:
5763 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5764 :END:
5765
5766 #+begin_src sh :tangle no
5767 cur_vol=$(pamixer --get-volume)
5768
5769 if [ $(pamixer --get-mute) = true ]; then
5770 printf 'mt \n' "$cur_vol"
5771 else
5772 printf '%02d \n' "$cur_vol"
5773 fi
5774 #+end_src
5775
5776 ** wp
5777
5778 My little wallpaper changer script.
5779
5780 *** wp
5781 :PROPERTIES:
5782 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5783 :END:
5784
5785 #+begin_src bash :tangle no
5786 export DISPLAY=:0
5787
5788 case "$1" in
5789 "day")
5790 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5791 ;;
5792 "night")
5793 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5794 ;;
5795 *)
5796 echo $"Usage: $0 {day|night}"
5797 exit 1
5798 esac
5799 #+end_src
5800
5801 *** wp-auto
5802 :PROPERTIES:
5803 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5804 :END:
5805
5806 #+begin_src bash :tangle no
5807 SED=$(which sed)
5808 ROFI=$(which rofi)
5809
5810 export DISPLAY=:0
5811 HOUR=$(date +%H)
5812
5813 if [ -z "${SED}" ]
5814 then
5815 echo "Did not find 'sed', script cannot continue."
5816 exit 1
5817 fi
5818 if [ -z "${ROFI}" ]
5819 then
5820 echo "Did not find rofi, there is no point to continue."
5821 exit 1
5822 fi
5823
5824 ###
5825 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5826 # Repeated calls should leave the config clean-ish
5827 ###
5828 function set_theme()
5829 {
5830 CDIR="${HOME}/.config/rofi/"
5831 if [ ! -d "${CDIR}" ]
5832 then
5833 mkdir -p ${CDIR}
5834 fi
5835 if [ -f "${CDIR}/config" ]
5836 then
5837 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5838 fi
5839 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5840
5841 }
5842
5843 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5844 then
5845 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5846 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5847 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5848 else
5849 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5850 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5851 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5852 fi
5853 #+end_src
5854
5855 *** wp.service
5856 :PROPERTIES:
5857 :header-args+: :tangle ~/.config/systemd/user/wp.service
5858 :END:
5859
5860 #+begin_src conf :tangle no
5861 [Unit]
5862 Description=wallpaper service
5863
5864 [Service]
5865 Type=oneshot
5866 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5867 #+end_src
5868
5869 *** wp.timer
5870 :PROPERTIES:
5871 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5872 :END:
5873
5874 #+begin_src conf :tangle no
5875 [Unit]
5876 [Unit]
5877 Description=wallpaper timer
5878
5879 [Timer]
5880 OnCalendar=07,21:00
5881 Unit=wp.service
5882 Persistent=true
5883
5884 [Install]
5885 WantedBy=timers.target
5886 #+end_src
5887
5888 ** zathura-sync.sh
5889 :PROPERTIES:
5890 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5891 :END:
5892
5893 #+begin_src sh
5894 pos="$1"
5895 pdffile="$2"
5896 zathura --synctex-forward "$pos" "$pdffile" || \
5897 (
5898 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5899 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5900 #+end_src
5901 ** Fun :)
5902
5903 *** eat-em
5904 :PROPERTIES:
5905 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5906 :END:
5907
5908 #+begin_src sh
5909 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5910 # [ESC] character in original post removed here.
5911
5912 # ANSI Color -- use these variables to easily have different color
5913 # and format output. Make sure to output the reset sequence after
5914 # colors (f = foreground, b = background), and use the 'off'
5915 # feature for anything you turn on.
5916
5917 initializeANSI()
5918 {
5919 esc="$(echo -en '\e')"
5920
5921 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5922 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5923 cyanf="${esc}[36m"; whitef="${esc}[37m"
5924
5925 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5926 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5927 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5928
5929 boldon="${esc}[1m"; boldoff="${esc}[22m"
5930 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5931 ulon="${esc}[4m"; uloff="${esc}[24m"
5932 invon="${esc}[7m"; invoff="${esc}[27m"
5933
5934 reset="${esc}[0m"
5935 }
5936
5937 # note in this first use that switching colors doesn't require a reset
5938 # first - the new color overrides the old one.
5939
5940 #clear
5941
5942 initializeANSI
5943
5944 cat << EOF
5945
5946 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5947 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5948 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5949 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5950 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5951 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5952
5953 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5954 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5955 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5956 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5957 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5958 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5959
5960 EOF
5961 #+end_src
5962
5963 *** invade-em
5964 :PROPERTIES:
5965 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5966 :END:
5967
5968 #+begin_src bash
5969 #
5970 # ANSI color scheme script featuring Space Invaders
5971 #
5972 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5973 # Modified by lolilolicon
5974 #
5975
5976 f=3 b=4
5977 for j in f b; do
5978 for i in {0..7}; do
5979 printf -v $j$i %b "\e[${!j}${i}m"
5980 done
5981 done
5982 bld=$'\e[1m'
5983 rst=$'\e[0m'
5984
5985 cat << EOF
5986
5987 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5988 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5989 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5990 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5991
5992 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5993 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5994 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5995 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5996
5997
5998 $f7▌$rst
5999
6000 $f7▌$rst
6001
6002 $f7 ▄█▄ $rst
6003 $f7▄█████████▄$rst
6004 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
6005
6006 EOF
6007 #+end_src