git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments no :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use besides GNU Emacs.
  16
  17 ** Fontconfig
  18 :PROPERTIES:
  19 :header-args+: :tangle ~/.config/fontconfig/fonts.conf
  20 :END:
  21
  22 #+begin_src xml
  23 <?xml version="1.0"?>
  24 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
  25 <fontconfig>
  26  <match target="font">
  27   <edit mode="assign" name="rgba">
  28    <const>rgb</const>
  29   </edit>
  30  </match>
  31  <match target="font">
  32   <edit mode="assign" name="hinting">
  33    <bool>true</bool>
  34   </edit>
  35  </match>
  36  <match target="font">
  37   <edit mode="assign" name="hintstyle">
  38    <const>hintslight</const>
  39   </edit>
  40  </match>
  41  <match target="font">
  42   <edit mode="assign" name="antialias">
  43    <bool>true</bool>
  44   </edit>
  45  </match>
  46  <match target="font">
  47   <edit mode="assign" name="lcdfilter">
  48    <const>lcddefault</const>
  49   </edit>
  50  </match>
  51  <dir>~/.fonts</dir>
  52
  53  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
  54  <alias binding="same">
  55   <family>Helvetica</family>
  56   <prefer>
  57    <family>Liberation Sans</family>
  58   </prefer>
  59 </alias>
  60 </fontconfig>
  61 #+end_src
  62
  63 ** getmail
  64 :PROPERTIES:
  65 :header-args+: :tangle ~/.config/getmail/getmailrc
  66 :END:
  67
  68 #+begin_src conf
  69 [retriever]
  70 type = SimplePOP3SSLRetriever
  71 server = fencepost.gnu.org
  72 username = bandali
  73 password_command = ("gpg", "--no-tty", "-q", "-d", "/home/bandali/.passwd/gnu.gpg")
  74 port = 995
  75 use_apop = True
  76
  77 [destination]
  78 type = Maildir
  79 path = ~/mail/gnu.local/bandali/mail/
  80
  81 # [destination]
  82 # type = MDA_external
  83 # path = /usr/lib/dovecot/deliver
  84 # arguments = ('-e', '-f', '%(sender)', '-d', 'bandali@gnu.local')
  85
  86 [options]
  87 read_all = false
  88 delete_after = 1
  89 # delete = true
  90 received = false
  91 delivered_to = false
  92 #+end_src
  93
  94 ** Git
  95
  96 *** config
  97 :PROPERTIES:
  98 :header-args+: :tangle ~/.config/git/config
  99 :END:
 100
 101 #+begin_src conf
 102 [user]
 103         name = Amin Bandali
 104         email = bandali@gnu.org
 105         signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
 106
 107 [commit]
 108         gpgsign = true
 109
 110 # [format]
 111 #       signoff = true
 112
 113 [core]
 114         autocrlf = input  # CRLF -> LF on commit
 115         editor = emacsclient -t
 116         pager = "less"
 117
 118 [mailmap]
 119         file = ~/.config/git/mailmap
 120
 121 [alias]
 122         git = !exec git  # handle nested git calls, e.g. git git status
 123         aliases = config --get-regexp '^alias\\.'
 124         a = add
 125         s = status
 126         sl = status --long
 127         c = checkout
 128         cb = checkout -b
 129         b = branch
 130         r = rebase
 131         p = pull
 132         pr = pull --rebase
 133         ps = push
 134         psf = push --force
 135         nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
 136         nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
 137
 138 [color]
 139         ui = auto
 140 [color "status"]
 141         added = green bold
 142         changed = red bold
 143         untracked = red bold
 144 [color "branch"]
 145         current = green bold
 146         remote = magenta bold
 147 [color "diff"]
 148         new = green bold
 149         old = red bold
 150
 151 # [status]
 152 #       # showUntrackedFiles = all
 153 #       short=true
 154 #       branch=true
 155
 156 [github]
 157         user = notbandali
 158
 159 [sendemail]
 160         smtpuser = bandali
 161         smtpserver = fencepost.gnu.org
 162         smtpserverport = 587
 163         smtpencryption = tls
 164         annotate = yes
 165
 166 [transfer]
 167         fsckObjects = true
 168 #+end_src
 169
 170 *** ignore
 171 :PROPERTIES:
 172 :header-args+: :tangle ~/.config/git/ignore
 173 :END:
 174
 175 #+begin_src conf
 176 *.orig
 177 *.py[co]
 178 *.sublime-workspace
 179 *~
 180 .DS_Store
 181 *.elc
 182 *-autoloads.el
 183 TAGS
 184 #+end_src
 185
 186 *** mailmap
 187 :PROPERTIES:
 188 :header-args+: :tangle ~/.config/git/mailmap
 189 :END:
 190
 191 #+begin_src conf
 192 <bandali@gnu.org> <mab@gnu.org>
 193 <bandali@gnu.org> <amin@gnu.org>
 194 <bandali@gnu.org> <aminb@gnu.org>
 195 <bandali@gnu.org> <amin@aminb.org>
 196 <bandali@gnu.org> <me@aminb.org>
 197 #+end_src
 198
 199 ** GnuPG
 200 :PROPERTIES:
 201 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 202 :END:
 203
 204 #+begin_src conf
 205 default-cache-ttl 43200
 206 max-cache-ttl 86400
 207
 208 default-cache-ttl-ssh 43200
 209 max-cache-ttl-ssh 86400
 210
 211 pinentry-program /home/bandali/.guix-profile/bin/pinentry-emacs
 212 allow-emacs-pinentry
 213 allow-loopback-pinentry
 214 #+end_src
 215
 216 ** GTK
 217
 218 *** GTK+ 2
 219 :PROPERTIES:
 220 :header-args+: :tangle ~/.gtkrc-2.0
 221 :END:
 222
 223 #+begin_src conf
 224 gtk-theme-name="Xfce"
 225 # gtk-icon-theme-name="elementary Xfce darker"
 226 gtk-font-name="Roboto 10"
 227 # gtk-font-name="Source Code Variable 10"
 228 gtk-menu-images=0
 229 # gtk-key-theme-name = "Emacs"
 230 #+end_src
 231
 232 *** GTK+ 3
 233 :PROPERTIES:
 234 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 235 :END:
 236
 237 #+begin_src conf
 238 [Settings]
 239 gtk-icon-theme-name = Adwaita
 240 # gtk-theme-name = Adwaita
 241
 242 gtk-theme-name = Xfce
 243 # gtk-theme-name = Arc-Darker
 244 # gtk-theme-name = Numix-ArchBlue
 245
 246 gtk-font-name = Roboto 10
 247 # gtk-font-name = Source Code Variable Medium 10
 248 # gtk-key-theme-name = Emacs
 249 #+end_src
 250
 251 ** Guix
 252
 253 *** Channels
 254 :PROPERTIES:
 255 :header-args+: :tangle ~/.config/guix/channels.scm
 256 :END:
 257
 258 #+begin_src scheme
 259 (list (channel
 260        (name 'guix)        ; https://git.savannah.gnu.org/git/guix.git
 261        (url "file:///home/bandali/src/git/guix"))
 262       (channel
 263        (name 'guix-bandali)  ; https://git.sr.ht/~bandali/guix-bandali
 264        (url "file:///home/bandali/src/git/guix-bandali")))
 265 #+end_src
 266
 267 *** Profile manifests
 268
 269 To install/update the packages of the default profile, use
 270 #+begin_example
 271 guix package -m $MY_GUIX_MANIFESTS/main.scm
 272 #+end_example
 273 and for other profiles, use
 274 #+begin_example
 275 guix package -m $MY_GUIX_MANIFESTS/name.scm -p $MY_GUIX_PROFILES/name/name
 276 #+end_example
 277 where =name= is the name of the profile (e.g. =doc=, =media=, ...).
 278
 279 **** doc
 280 :PROPERTIES:
 281 :header-args+: :tangle ~/.config/guix/manifest/doc.scm
 282 :END:
 283
 284 #+begin_src scheme
 285 (specifications->manifest
 286   '("libreoffice"
 287     "texlive-amsfonts"
 288     "texlive-base"
 289     "texlive-latex-listings"
 290     ;; "texlive-palatino"
 291     "texlive-xcolor"
 292 ))
 293 #+end_src
 294
 295 **** main
 296 :PROPERTIES:
 297 :header-args+: :tangle ~/.config/guix/manifest/main.scm
 298 :END:
 299
 300 #+begin_src scheme
 301 (specifications->manifest
 302   '("alsa-utils"
 303     "bash-completion"
 304     "cpufrequtils"
 305     "cpupower"
 306     "cvs"
 307     "dunst"
 308     "emacs"
 309     "emacs-alert"
 310     "emacs-amx"
 311     "emacs-async"
 312     "emacs-biblio-git"
 313     "emacs-boxquote"
 314     "emacs-company"
 315     "emacs-company-ebdb"
 316     "emacs-crux"
 317     "emacs-dash"
 318     "emacs-debbugs"
 319     "emacs-diff-hl"
 320     "emacs-dmenu"
 321     "emacs-doom-themes"
 322     "emacs-ebdb"
 323     "emacs-emmet-mode"
 324     ;; "emacs-emojify"
 325     "emacs-erc-hl-nicks"
 326     "emacs-erc-scrolltoplace"
 327     "emacs-eshell-up"
 328     "emacs-exec-path-from-shell"
 329     "emacs-expand-region"
 330     "emacs-exwm"
 331     "emacs-exwm-edit"
 332     "emacs-flycheck"
 333     "emacs-geiser"
 334     ;; "emacs-gnus-harvest"
 335     "emacs-guix"
 336     "emacs-helpful"
 337     "emacs-hl-todo"
 338     "emacs-ivy"
 339     "emacs-magit"
 340     "emacs-message-x"
 341     "emacs-minions"
 342     ;; "emacs-multi-term"
 343     "emacs-multiple-cursors"
 344     "emacs-mwim"
 345     ;; "emacs-next"
 346     ;; "emacs-next-delight"
 347     "emacs-no-littering"
 348     "emacs-org"
 349     "emacs-org-contrib"
 350     "emacs-org-ref"
 351     "emacs-orgalist"
 352     "emacs-page-break-lines"
 353     "emacs-pass"
 354     "emacs-pinentry"
 355     "emacs-projectile"
 356     "emacs-shrink-path-git"
 357     "emacs-smart-mode-line"
 358     "emacs-typo"
 359     "emacs-unkillable-scratch"
 360     "emacs-use-package"
 361     "emacs-web-mode"
 362     "emacs-which-key"
 363     "emacs-yasnippet"
 364     "emacs-znc-git"
 365     "font-adobe-source-code-pro"
 366     "font-gnu-freefont-ttf"
 367     "font-google-roboto"
 368     "font-liberation"
 369     "font-linuxlibertine"
 370     "font-sil-gentium"
 371     "font-tex-gyre"
 372     ;; "font-ubuntu"
 373     "font-vazir"
 374     "getmail"
 375     "gettext"
 376     "git"
 377     "git:send-email"
 378     "gnupg"
 379     "guile"
 380     "haunt"
 381     "htop"
 382     "hunspell"
 383     "hunspell-dict-en-ca"
 384     "hunspell-dict-en-us"
 385     "isync"
 386     "light"
 387     "msmtp"
 388     "ncdu"
 389     "notmuch"
 390     "openjdk"
 391     "openssh"
 392     "openssl"
 393     "pass-otp"
 394     "password-store"
 395     "pasystray"
 396     "pinentry-emacs"
 397     "poppler"                           ; for 'pdffonts'
 398     "rofi"
 399     "rofi-pass"
 400     "rsync"
 401     "rxvt-unicode"
 402     "screen"
 403     "scrot"
 404     "setxkbmap"
 405     "strace"
 406     "thinkfan"
 407     "unzip"
 408     "wget"
 409     "xdg-user-dirs"
 410     ;; "xkbcomp"
 411     "xmodmap"
 412     "xrdb"
 413     "xset"
 414     "xsetroot"))
 415 #+end_src
 416
 417 **** media
 418 :PROPERTIES:
 419 :header-args+: :tangle ~/.config/guix/manifest/media.scm
 420 :END:
 421
 422 #+begin_src scheme
 423 (specifications->manifest
 424   '("audacity"
 425     "gimp"
 426     "inkscape"
 427     "mpv"
 428     "youtube-dl"))
 429 #+end_src
 430
 431 **** web
 432 :PROPERTIES:
 433 :header-args+: :tangle ~/.config/guix/manifest/web.scm
 434 :END:
 435
 436 #+begin_src scheme
 437 (specifications->manifest
 438   '("icecat"
 439     "rtv"))
 440 #+end_src
 441
 442 *** Systems
 443
 444 **** chaman
 445 :PROPERTIES:
 446 :header-args+: :tangle ~/.config/guix/system/chaman.scm
 447 :END:
 448
 449 #+begin_src scheme
 450 (use-modules (gnu)
 451              (gnu packages certs)       ; for nss-certs
 452              (gnu packages emacs-xyz)   ; for exwm
 453              (gnu packages linux))      ; for powertop
 454 (use-service-modules admin desktop mail networking pm ssh xorg)
 455
 456 (operating-system
 457  (host-name "chaman")
 458  (locale "en_CA.utf8")
 459  (timezone "Canada/Eastern")
 460  (keyboard-layout
 461   (keyboard-layout "us" "basic"))
 462  (bootloader
 463   (bootloader-configuration
 464    (bootloader grub-bootloader)
 465    (target "/dev/sda")
 466    (keyboard-layout keyboard-layout)))
 467  (mapped-devices
 468   (list (mapped-device
 469          (source
 470           (uuid "283da85e-2c84-47e6-a8ca-20f4e8efb806"))
 471          (target "groot")
 472          (type luks-device-mapping))
 473         (mapped-device
 474          (source
 475           (uuid "017ddebc-c2c3-4a0a-bda4-d47ec0bc67f0"))
 476          (target "data")
 477          (type luks-device-mapping))))
 478  (file-systems
 479   (cons* (file-system
 480           (mount-point "/")
 481           (device "/dev/mapper/groot")
 482           (type "ext4")
 483           (dependencies mapped-devices))
 484          (file-system
 485           (mount-point "/data")
 486           (device "/dev/mapper/data")
 487           (type "ext4")
 488           (dependencies mapped-devices))
 489          %base-file-systems))
 490  (users
 491   (cons* (user-account
 492           (name "bandali")
 493           (group "users")
 494           (home-directory "/home/bandali")
 495           (supplementary-groups
 496            '("wheel" "netdev" "audio" "video")))
 497          %base-user-accounts))
 498  (packages
 499   (cons* nss-certs
 500          emacs-exwm
 501          %base-packages))
 502  (services
 503   (cons*
 504    (service xfce-desktop-service-type)
 505    (set-xorg-configuration
 506     (xorg-configuration
 507      (keyboard-layout keyboard-layout)))
 508    (dovecot-service
 509     #:config
 510     (dovecot-configuration
 511      ;; (log-path "/dev/stderr")
 512      (protocols (list (protocol-configuration
 513                        (name "imap"))))
 514      (ssl? "no")
 515      (listen '("127.0.0.1"))
 516      (disable-plaintext-auth? #f)
 517      (auth-mechanisms '("plain"))
 518      (postmaster-address "bandali@gnu.local")
 519      (mail-location "maildir:/home/bandali/mail/%d/%n/mail")
 520      (userdbs (list (userdb-configuration
 521                      (driver "static")
 522                      (args (list "uid=bandali" "gid=users" "home=/home/bandali/mail/%d/%n")))))
 523      (passdbs (list (passdb-configuration
 524                      (driver "passwd-file")
 525                      (args (list "/data/dovecot-passwd")))))))
 526    (service rottlog-service-type)
 527    (service thermald-service-type)
 528    (service tlp-service-type
 529             (tlp-configuration
 530              (cpu-boost-on-ac? #t)
 531              (sound-power-save-on-bat 0)
 532              (sound-power-save-controller? #f)
 533              ;; (usb-blacklist "0e8f:00a8") ;for some reason doesn't seem to work
 534              (usb-autosuspend? #f)))
 535    (simple-service 'my-powertop-auto-tune activation-service-type
 536                    #~(zero? (system* #$(file-append powertop "/sbin/powertop")
 537                                      "--auto-tune")))
 538    (simple-service 'light-udev-rules udev-service-type (list light))
 539    %desktop-services)))
 540 #+end_src
 541
 542 ** isync
 543 :PROPERTIES:
 544 :header-args+: :tangle ~/.config/isync/mbsyncrc
 545 :END:
 546
 547 #+begin_src conf
 548 # Global defaults
 549 CopyArrivalDate yes
 550 Create Both
 551 Expunge Both
 552
 553 ######
 554 IMAPAccount shemshak
 555 Host mail.shemshak.org
 556 User amin@shemshak.org
 557 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak.gpg"
 558 SSLType IMAPS
 559
 560 IMAPStore shemshak-remote
 561 Account shemshak
 562
 563 IMAPAccount shemshak-local
 564 Host 127.0.0.1
 565 Port 143
 566 User amin@shemshak.local
 567 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak-local.gpg"
 568 SSLType None
 569
 570 IMAPStore shemshak-local
 571 Account shemshak-local
 572
 573 Channel shemshak
 574 Master :shemshak-remote:
 575 Slave :shemshak-local:
 576 Patterns *
 577
 578 ######
 579 IMAPAccount gnub
 580 Host mail.shemshak.org
 581 User gnu@bandali.eu.org
 582 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub.gpg"
 583 SSLType IMAPS
 584
 585 IMAPStore gnub-remote
 586 Account gnub
 587
 588 IMAPAccount gnub-local
 589 Host 127.0.0.1
 590 Port 143
 591 User bandali@gnu.local
 592 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub-local.gpg"
 593 SSLType None
 594
 595 IMAPStore gnub-local
 596 Account gnub-local
 597
 598 Channel gnub
 599 Master :gnub-remote:
 600 Slave :gnub-local:
 601 Patterns *
 602
 603 ######
 604 IMAPAccount uwaterloo
 605 Host connect.uwaterloo.ca
 606 User abandali
 607 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
 608 SSLType IMAPS
 609
 610 IMAPStore uwaterloo-remote
 611 Account uwaterloo
 612
 613 IMAPAccount uwaterloo-local
 614 Host 127.0.0.1
 615 Port 143
 616 User abandali@uw.local
 617 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-local.gpg"
 618 SSLType None
 619
 620 IMAPStore uwaterloo-local
 621 Account uwaterloo-local
 622
 623 Channel uwaterloo
 624 Master :uwaterloo-remote:
 625 Slave :uwaterloo-local:
 626 Patterns *
 627
 628 ######
 629 IMAPAccount csclub
 630 Host mail.csclub.uwaterloo.ca
 631 User abandali
 632 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg"
 633 SSLType IMAPS
 634
 635 IMAPStore csclub-remote
 636 Account csclub
 637
 638 IMAPAccount csclub-local
 639 Host 127.0.0.1
 640 Port 143
 641 User abandali@csc.uw.local
 642 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-local.gpg"
 643 SSLType None
 644
 645 IMAPStore csclub-local
 646 Account csclub-local
 647
 648 Channel csclub
 649 Master :csclub-remote:
 650 Slave :csclub-local:
 651 Patterns *
 652 #+end_src
 653
 654 ** Latexmk
 655 :PROPERTIES:
 656 :header-args+: :tangle ~/.config/latexmk/latexmkrc
 657 :END:
 658
 659 #+begin_src conf
 660 $pdf_previewer = "start zathura %O %S";
 661 $clean_ext = "aux out";
 662
 663 # $pdf_update_method = 4;
 664 # $pdf_update_command = "zathura %O %S";
 665
 666 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
 667 # by Ctrl+click in the PDF.
 668 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
 669 # editor.
 670 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
 671 #+end_src
 672
 673 ** mpd
 674 :PROPERTIES:
 675 :header-args+: :tangle ~/.config/mpd/mpd.conf
 676 :END:
 677
 678 #+begin_src conf
 679 # An example configuration file for MPD.
 680 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
 681
 682
 683 # Files and directories #######################################################
 684 #
 685 # This setting controls the top directory which MPD will search to discover the
 686 # available audio files and add them to the daemon's online database. This
 687 # setting defaults to the XDG directory, otherwise the music directory will be
 688 # be disabled and audio files will only be accepted over ipc socket (using
 689 # file:// protocol) or streaming files over an accepted protocol.
 690 #
 691 music_directory         "~/usr/music"
 692 #
 693 # This setting sets the MPD internal playlist directory. The purpose of this
 694 # directory is storage for playlists created by MPD. The server will use
 695 # playlist files not created by the server but only if they are in the MPD
 696 # format. This setting defaults to playlist saving being disabled.
 697 #
 698 playlist_directory              "~/.mpd/playlists"
 699 #
 700 # This setting sets the location of the MPD database. This file is used to
 701 # load the database at server start up and store the database while the
 702 # server is not up. This setting defaults to disabled which will allow
 703 # MPD to accept files over ipc socket (using file:// protocol) or streaming
 704 # files over an accepted protocol.
 705 #
 706 db_file                 "~/.mpd/database"
 707 #
 708 # These settings are the locations for the daemon log files for the daemon.
 709 # These logs are great for troubleshooting, depending on your log_level
 710 # settings.
 711 #
 712 # The special value "syslog" makes MPD use the local syslog daemon. This
 713 # setting defaults to logging to syslog, otherwise logging is disabled.
 714 #
 715 log_file                        "~/.mpd/log"
 716 #
 717 # This setting sets the location of the file which stores the process ID
 718 # for use of mpd --kill and some init scripts. This setting is disabled by
 719 # default and the pid file will not be stored.
 720 #
 721 pid_file                        "~/.mpd/pid"
 722 #
 723 # This setting sets the location of the file which contains information about
 724 # most variables to get MPD back into the same general shape it was in before
 725 # it was brought down. This setting is disabled by default and the server
 726 # state will be reset on server start up.
 727 #
 728 state_file                      "~/.mpd/state"
 729 #
 730 # The location of the sticker database.  This is a database which
 731 # manages dynamic information attached to songs.
 732 #
 733 sticker_file                    "~/.mpd/sticker.sql"
 734 #
 735 ###############################################################################
 736
 737
 738 # General music daemon options ################################################
 739 #
 740 # This setting specifies the user that MPD will run as. MPD should never run as
 741 # root and you may use this setting to make MPD change its user ID after
 742 # initialization. This setting is disabled by default and MPD is run as the
 743 # current user.
 744 #
 745 #user                           "nobody"
 746 #
 747 # This setting specifies the group that MPD will run as. If not specified
 748 # primary group of user specified with "user" setting will be used (if set).
 749 # This is useful if MPD needs to be a member of group such as "audio" to
 750 # have permission to use sound card.
 751 #
 752 #group                          "nogroup"
 753 #
 754 # This setting sets the address for the daemon to listen on. Careful attention
 755 # should be paid if this is assigned to anything other then the default, any.
 756 # This setting can deny access to control of the daemon. Not effective if
 757 # systemd socket activiation is in use.
 758 #
 759 # For network
 760 #bind_to_address                "any"
 761 #
 762 # And for Unix Socket
 763 #bind_to_address                "~/.mpd/socket"
 764 #
 765 # This setting is the TCP port that is desired for the daemon to get assigned
 766 # to.
 767 #
 768 #port                           "6600"
 769 #
 770 # This setting controls the type of information which is logged. Available
 771 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
 772 # argument is recommended for troubleshooting, though can quickly stretch
 773 # available resources on limited hardware storage.
 774 #
 775 #log_level                      "default"
 776 #
 777 # If you have a problem with your MP3s ending abruptly it is recommended that
 778 # you set this argument to "no" to attempt to fix the problem. If this solves
 779 # the problem, it is highly recommended to fix the MP3 files with vbrfix
 780 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
 781 # point gapless MP3 playback can be enabled.
 782 #
 783 #gapless_mp3_playback                   "yes"
 784 #
 785 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
 786 # of starting playback after startup.
 787 #
 788 #restore_paused "no"
 789 #
 790 # This setting enables MPD to create playlists in a format usable by other
 791 # music players.
 792 #
 793 #save_absolute_paths_in_playlists       "no"
 794 #
 795 # This setting defines a list of tag types that will be extracted during the
 796 # audio file discovery process. The complete list of possible values can be
 797 # found in the user manual.
 798 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
 799 #
 800 # This setting enables automatic update of MPD's database when files in
 801 # music_directory are changed.
 802 #
 803 #auto_update    "yes"
 804 #
 805 # Limit the depth of the directories being watched, 0 means only watch
 806 # the music directory itself.  There is no limit by default.
 807 #
 808 #auto_update_depth "3"
 809 #
 810 ###############################################################################
 811
 812
 813 # Symbolic link behavior ######################################################
 814 #
 815 # If this setting is set to "yes", MPD will discover audio files by following
 816 # symbolic links outside of the configured music_directory.
 817 #
 818 #follow_outside_symlinks        "yes"
 819 #
 820 # If this setting is set to "yes", MPD will discover audio files by following
 821 # symbolic links inside of the configured music_directory.
 822 #
 823 #follow_inside_symlinks         "yes"
 824 #
 825 ###############################################################################
 826
 827
 828 # Zeroconf / Avahi Service Discovery ##########################################
 829 #
 830 # If this setting is set to "yes", service information will be published with
 831 # Zeroconf / Avahi.
 832 #
 833 #zeroconf_enabled               "yes"
 834 #
 835 # The argument to this setting will be the Zeroconf / Avahi unique name for
 836 # this MPD server on the network.
 837 #
 838 #zeroconf_name                  "Music Player"
 839 #
 840 ###############################################################################
 841
 842
 843 # Permissions #################################################################
 844 #
 845 # If this setting is set, MPD will require password authorization. The password
 846 # setting can be specified multiple times for different password profiles.
 847 #
 848 #password                        "password@read,add,control,admin"
 849 #
 850 # This setting specifies the permissions a user has who has not yet logged in.
 851 #
 852 #default_permissions             "read,add,control,admin"
 853 #
 854 ###############################################################################
 855
 856
 857 # Database #######################################################################
 858 #
 859
 860 #database {
 861 #       plugin "proxy"
 862 #       host "other.mpd.host"
 863 #       port "6600"
 864 #}
 865
 866 # Input #######################################################################
 867 #
 868
 869 input {
 870         plugin "curl"
 871 #       proxy "proxy.isp.com:8080"
 872 #       proxy_user "user"
 873 #       proxy_password "password"
 874 }
 875
 876 #
 877 ###############################################################################
 878
 879 # Audio Output ################################################################
 880 #
 881
 882 audio_output {
 883     type    "pulse"
 884     name    "pulse audio"
 885 }
 886
 887 audio_output {
 888     type    "fifo"
 889     name    "my_fifo"
 890     path    "/tmp/mpd.fifo"
 891     format  "44100:16:2"
 892 }
 893
 894 # MPD supports various audio output types, as well as playing through multiple
 895 # audio outputs at the same time, through multiple audio_output settings
 896 # blocks. Setting this block is optional, though the server will only attempt
 897 # autodetection for one sound card.
 898 #
 899 # An example of an ALSA output:
 900 #
 901 #audio_output {
 902 #       type            "alsa"
 903 #       name            "My ALSA Device"
 904 ##      device          "hw:0,0"        # optional
 905 ##      mixer_type      "hardware"      # optional
 906 ##      mixer_device    "default"       # optional
 907 ##      mixer_control   "PCM"           # optional
 908 ##      mixer_index     "0"             # optional
 909 #}
 910 #
 911 # An example of an OSS output:
 912 #
 913 #audio_output {
 914 #       type            "oss"
 915 #       name            "My OSS Device"
 916 ##      device          "/dev/dsp"      # optional
 917 ##      mixer_type      "hardware"      # optional
 918 ##      mixer_device    "/dev/mixer"    # optional
 919 ##      mixer_control   "PCM"           # optional
 920 #}
 921 #
 922 # An example of a shout output (for streaming to Icecast):
 923 #
 924 #audio_output {
 925 #       type            "shout"
 926 #       encoder         "vorbis"                # optional
 927 #       name            "My Shout Stream"
 928 #       host            "localhost"
 929 #       port            "8000"
 930 #       mount           "/mpd.ogg"
 931 #       password        "hackme"
 932 #       quality         "5.0"
 933 #       bitrate         "128"
 934 #       format          "44100:16:1"
 935 ##      protocol        "icecast2"              # optional
 936 ##      user            "source"                # optional
 937 ##      description     "My Stream Description" # optional
 938 ##      url             "http://example.com"    # optional
 939 ##      genre           "jazz"                  # optional
 940 ##      public          "no"                    # optional
 941 ##      timeout         "2"                     # optional
 942 ##      mixer_type      "software"              # optional
 943 #}
 944 #
 945 # An example of a recorder output:
 946 #
 947 #audio_output {
 948 #       type            "recorder"
 949 #       name            "My recorder"
 950 #       encoder         "vorbis"                # optional, vorbis or lame
 951 #       path            "/var/lib/mpd/recorder/mpd.ogg"
 952 ##      quality         "5.0"                   # do not define if bitrate is defined
 953 #       bitrate         "128"                   # do not define if quality is defined
 954 #       format          "44100:16:1"
 955 #}
 956 #
 957 # An example of a httpd output (built-in HTTP streaming server):
 958 #
 959 #audio_output {
 960 #       type            "httpd"
 961 #       name            "My HTTP Stream"
 962 #       encoder         "vorbis"                # optional, vorbis or lame
 963 #       port            "8000"
 964 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
 965 ##      quality         "5.0"                   # do not define if bitrate is defined
 966 #       bitrate         "128"                   # do not define if quality is defined
 967 #       format          "44100:16:1"
 968 #       max_clients     "0"                     # optional 0=no limit
 969 #}
 970 #
 971 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
 972 #
 973 #audio_output {
 974 #       type            "pulse"
 975 #       name            "My Pulse Output"
 976 ##      server          "remote_server"         # optional
 977 ##      sink            "remote_server_sink"    # optional
 978 #}
 979 #
 980 # An example of a winmm output (Windows multimedia API).
 981 #
 982 #audio_output {
 983 #       type            "winmm"
 984 #       name            "My WinMM output"
 985 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
 986 #               or
 987 ##      device          "0"             # optional
 988 ##      mixer_type      "hardware"      # optional
 989 #}
 990 #
 991 # An example of an openal output.
 992 #
 993 #audio_output {
 994 #       type            "openal"
 995 #       name            "My OpenAL output"
 996 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
 997 #}
 998 #
 999 # An example of an sndio output.
1000 #
1001 #audio_output {
1002 #       type            "sndio"
1003 #       name            "sndio output"
1004 #       mixer_type      "software"
1005 #}
1006 #
1007 # An example of an OS X output:
1008 #
1009 #audio_output {
1010 #       type            "osx"
1011 #       name            "My OS X Device"
1012 ##      device          "Built-in Output"       # optional
1013 ##      channel_map      "-1,-1,0,1"    # optional
1014 #}
1015 #
1016 ## Example "pipe" output:
1017 #
1018 #audio_output {
1019 #       type            "pipe"
1020 #       name            "my pipe"
1021 #       command         "aplay -f cd 2>/dev/null"
1022 ## Or if you're want to use AudioCompress
1023 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1024 ## Or to send raw PCM stream through PCM:
1025 #       command         "nc example.org 8765"
1026 #       format          "44100:16:2"
1027 #}
1028 #
1029 ## An example of a null output (for no audio output):
1030 #
1031 #audio_output {
1032 #       type            "null"
1033 #       name            "My Null Output"
1034 #       mixer_type      "none"                  # optional
1035 #}
1036 #
1037 ###############################################################################
1038
1039
1040 # Normalization automatic volume adjustments ##################################
1041 #
1042 # This setting specifies the type of ReplayGain to use. This setting can have
1043 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1044 # chooses between "track" and "album" depending on the current state of
1045 # random playback. If random playback is enabled then "track" mode is used.
1046 # See <http://www.replaygain.org> for more details about ReplayGain.
1047 # This setting is off by default.
1048 #
1049 #replaygain                     "album"
1050 #
1051 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1052 # default this setting is disabled.
1053 #
1054 #replaygain_preamp              "0"
1055 #
1056 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1057 # By default this setting is disabled.
1058 #
1059 #replaygain_missing_preamp      "0"
1060 #
1061 # This setting enables or disables ReplayGain limiting.
1062 # MPD calculates actual amplification based on the ReplayGain tags
1063 # and replaygain_preamp / replaygain_missing_preamp setting.
1064 # If replaygain_limit is enabled MPD will never amplify audio signal
1065 # above its original level. If replaygain_limit is disabled such amplification
1066 # might occur. By default this setting is enabled.
1067 #
1068 #replaygain_limit               "yes"
1069 #
1070 # This setting enables on-the-fly normalization volume adjustment. This will
1071 # result in the volume of all playing audio to be adjusted so the output has
1072 # equal "loudness". This setting is disabled by default.
1073 #
1074 #volume_normalization           "no"
1075 #
1076 ###############################################################################
1077
1078 # Character Encoding ##########################################################
1079 #
1080 # If file or directory names do not display correctly for your locale then you
1081 # may need to modify this setting.
1082 #
1083 #filesystem_charset             "UTF-8"
1084 #
1085 ###############################################################################
1086 #+end_src
1087
1088 ** msmtp
1089 :PROPERTIES:
1090 :header-args+: :tangle ~/.config/msmtp/config
1091 :END:
1092
1093 #+begin_src conf
1094 # Set default values for all following accounts.
1095 defaults
1096 port 587
1097 tls on
1098 auth on
1099 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1100 logfile ~/.msmtp.log
1101
1102 account shemshak
1103 host mail.shemshak.org
1104 # use `msmtp -a shemshak --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1105 tls_fingerprint 01:6F:1B:92:0A:E8:47:35:62:80:DD:17:F5:9A:9D:26:7D:59:E2:EC:69:67:36:69:2F:58:8C:89:57:66:F6:B1
1106 tls_starttls on
1107 from amin@shemshak.org
1108 user amin@shemshak.org
1109 passwordeval gpg --no-tty -q -d ~/.passwd/shemshak.gpg
1110
1111 account aminb : shemshak
1112 from amin@aminb.org
1113 account bndl : shemshak
1114 from amin@bndl.org
1115
1116 account gnu
1117 host fencepost.gnu.org
1118 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1119 tls_fingerprint A5:E9:14:9F:46:3E:8E:0F:09:8C:5D:21:C2:BE:DE:77:BE:8B:E7:82:6C:56:78:0C:62:CA:46:D7:18:FE:33:05
1120 tls_starttls on
1121 from bandali@gnu.org
1122 user bandali
1123 passwordeval gpg --no-tty -q -d ~/.passwd/gnu.gpg
1124
1125 account gnu-mab : gnu
1126 from mab@gnu.org
1127 account gnu-aminb : gnu
1128 from aminb@gnu.org
1129 account gnu-amin : gnu
1130 from amin@gnu.org
1131
1132 account uwaterloo
1133 host connect.uwaterloo.ca
1134 tls_starttls on
1135 from abandali@uwaterloo.ca
1136 user abandali
1137 passwordeval gpg --no-tty -q -d ~/.passwd/uwaterloo.gpg
1138 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1139
1140 account uwaterloo-friendly : uwaterloo
1141 from bandali@uwaterloo.ca
1142
1143 account csclub
1144 host mail.csclub.uwaterloo.ca
1145 tls_starttls on
1146 from abandali@csclub.uwaterloo.ca
1147 user abandali
1148 passwordeval gpg --no-tty -q -d ~/.passwd/csclub.gpg
1149 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1150
1151 account csclub-friendly : csclub
1152 from bandali@csclub.uwaterloo.ca
1153
1154 # Set a default account
1155 account default : shemshak
1156 #+end_src
1157
1158 ** Readline
1159 :PROPERTIES:
1160 :header-args+: :tangle ~/.config/readline/inputrc
1161 :END:
1162
1163 #+begin_src conf
1164 set enable-bracketed-paste on
1165
1166 set colored-stats on
1167 set colored-completion-prefix on
1168 set completion-ignore-case on
1169 set menu-complete-display-prefix on
1170 set page-completions off
1171 set show-all-if-ambiguous on
1172 set show-all-if-unmodified on
1173 set visible-stats on
1174
1175 TAB: menu-complete
1176 "\e[Z": menu-complete-backward
1177
1178 "\e[A": history-search-backward
1179 "\e[B": history-search-forward
1180 #+end_src
1181
1182 ** rofi
1183 :PROPERTIES:
1184 :header-args+: :tangle ~/.config/rofi/config
1185 :END:
1186
1187 #+begin_src conf
1188 ! rofi.font: Ubuntu Mono 13
1189 ! rofi.font: Inconsolata 16
1190 ! rofi.font: Iosevka 13
1191 ! rofi.font: Source Code Pro 11
1192 rofi.font: Source Code Pro 10.5
1193 rofi.modi: run,window
1194 ! rofi.width: 640
1195 rofi.width: 600
1196 !rofi.location: 2
1197 !rofi.yoffset: 200
1198 rofi.monitor: -1
1199 !rofi.lines: 10
1200
1201 rofi.theme: ~/.guix-profile/share/rofi/themes/gruvbox-light-hard.rasi
1202 #+end_src
1203
1204 ** rofi-pass
1205 :PROPERTIES:
1206 :header-args+: :tangle ~/.config/rofi-pass/config
1207 :END:
1208
1209 #+begin_src conf
1210 # permanently set alternative root dir
1211 # root=/path/to/root
1212
1213 # rofi command. Make sure to have "$@" as last argument
1214 _rofi () {
1215     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
1216     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
1217 }
1218
1219 # xdotool needs the keyboard layout to be set using setxkbmap
1220 # You can do this in your autostart scripts (e.g. xinitrc)
1221
1222 # If for some reason, you cannot do this, you can set the command here.
1223 # and set fix_layout to true
1224 fix_layout=false
1225
1226 layout_cmd () {
1227   setxkbmap us
1228 }
1229
1230 # fields to be used
1231 URL_field='url'
1232 USERNAME_field='user'
1233 AUTOTYPE_field='autotype'
1234
1235 # delay to be used for :delay keyword
1236 delay=2
1237
1238 ## Programs to be used
1239 # Editor
1240 EDITOR='gvim -f'
1241
1242 # Browser
1243 BROWSER='chromium'
1244
1245 ## Misc settings
1246
1247 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
1248 auto_enter='false'
1249 notify='false'
1250 default_autotype='user :tab pass'
1251
1252 # color of the help messages
1253 # leave empty for autodetection
1254 help_color="#4872FF"
1255
1256 # Clipboard settings
1257 # Possible options: primary, clipboard, both
1258 clip=primary
1259
1260 # Options for generating new password entries
1261 # default_user is also used for password files that have no user field.
1262 default_user=aminb
1263 default_user2=bandali
1264 password_length=30
1265
1266 # Custom Keybindings
1267 #autotype="Alt+1"
1268 autotype="Alt+m"
1269 type_user="Alt+2"
1270 type_pass="Alt+3"
1271 open_url="Alt+4"
1272 copy_name="Alt+u"
1273 copy_url="Alt+l"
1274 copy_pass="Alt+p"
1275 show="Alt+o"
1276 copy_entry="Alt+2"
1277 type_entry="Alt+1"
1278 copy_menu="Alt+c"
1279 action_menu="Alt+a"
1280 type_menu="Alt+t"
1281 help="Alt+h"
1282 switch="Alt+x"
1283 insert_pass="Alt+n"
1284 #+end_src
1285
1286 ** Screen
1287 :PROPERTIES:
1288 :header-args+: :tangle ~/.config/screen/screenrc
1289 :END:
1290
1291 #+begin_src screen
1292 startup_message off
1293 caption always "%{= kc}GNU Screen $USER@%H (load: %l)%-28=%{= .m}%D %d.%m.%Y %0c"
1294 #+end_src
1295
1296 ** Shell
1297
1298 *** GNU Bash
1299 :PROPERTIES:
1300 :header-args+: :tangle ~/.bashrc
1301 :END:
1302
1303 #+begin_src bash
1304 # Bash initialization for interactive non-login shells and
1305 # for remote shells (info "(bash) Bash Startup Files").
1306
1307 # Export 'SHELL' to child processes.  Programs such as 'screen'
1308 # honor it and otherwise use /bin/sh.
1309 export SHELL
1310
1311 if [[ $- != *i* ]]
1312 then
1313     # We are being invoked from a non-interactive shell.  If this
1314     # is an SSH session (as in "ssh host command"), source
1315     # /etc/profile so we get PATH and other essential variables.
1316     [[ -n "$SSH_CLIENT" ]] && source /etc/profile
1317
1318     # Don't do anything else.
1319     return
1320 fi
1321
1322 if [ -n "$IS_GUIX_SYSTEM" ]; then
1323     # Source the system-wide file.
1324     source /etc/bashrc
1325 fi
1326
1327 # from https://unix.stackexchange.com/a/55935
1328 b_prompt() {
1329     cwd=$(sed -e "s:$HOME:~:" -e "s:\(\.\?[^/]\)[^/]*/:\1/:g" <<<$PWD)
1330     printf $cwd
1331 }
1332
1333 if [ $(id -u) == "0" ]; then
1334     PS1='`printf "\[\e[1;31m\]\$\[\e[00m\]"` '
1335 else
1336     PS1='\$ '
1337 fi
1338 PS1="\u@\h:\w/`[ -n "$GUIX_ENVIRONMENT" ] && printf \" [env]\"`\n$PS1"
1339
1340 # set terminal title
1341 PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME}: $(b_prompt)\007"'
1342
1343 # i-beam cursor
1344 # echo -e "\033[5 q"              # blinking
1345 echo -e "\033[6 q"              # non-blinking
1346
1347 # various bash tweaks
1348 # append to the history file, don't overwrite it
1349 shopt -s histappend
1350 shopt -s cmdhist
1351 # check the window size after each command and, if necessary,
1352 # update the values of LINES and COLUMNS.
1353 shopt -s checkwinsize
1354 # If set, the pattern "**" used in a pathname expansion context will
1355 # match all files and zero or more directories and subdirectories.
1356 #shopt -s globstar
1357 # for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
1358 HISTSIZE=
1359 HISTFILESIZE=
1360 # don't put duplicate lines or lines starting with space in the
1361 # history.
1362 HISTCONTROL=ignoreboth
1363 # ignore a few very common commands and don't add them to history
1364 HISTIGNORE='ls:l:s:g:[bf]g:history'
1365 HISTTIMEFORMAT='%F %T '
1366 stty stop ""
1367
1368 # aliases
1369 alias ls='ls -p --color=auto'
1370 alias l='ls -lh'                # long format and human-readable sizes
1371 alias ll='l -A'                 # long format, all files
1372 alias dir='dir --color=auto'
1373 alias vdir='vdir --color=auto'
1374 alias grep='grep --color=auto'
1375 alias fgrep='fgrep --color=auto'
1376 alias egrep='egrep --color=auto'
1377 alias mpv="mpv --ytdl-format mp4"
1378 alias mv="mv -iv"
1379 alias cp="cp -iv"
1380 alias mbsync='mbsync -c "$XDG_CONFIG_HOME"/isync/mbsyncrc'
1381 alias getmail='getmail --getmaildir "$XDG_CONFIG_HOME"/getmail --rcfile getmailrc'
1382 alias m="mbsync csclub; mbsync uwaterloo; mbsync shemshak; mbsync gnub"
1383 alias best="youtube-dl -f best"
1384 alias e="$EDITOR"
1385 alias se="SUDO_EDITOR=\"emacsclient\" sudo -e"
1386
1387 aur() {
1388    cd ~/usr/builds
1389    [ -d ${1} ] || git clone https://aur.archlinux.org/${1}.git
1390    cd ${1}
1391 }
1392
1393 function t {
1394   cd $(mktemp -d /tmp/$1.XXXX)
1395 }
1396
1397 # separate alias definitions file, if exists
1398 if [ -f ~/.bash_aliases ]; then
1399     . ~/.bash_aliases
1400 fi
1401
1402 # enable programmable completion features (not needed if already
1403 # enabled in /etc/bash.bashrc and if /etc/profile sources
1404 # /etc/bash.bashrc).
1405 if ! shopt -oq posix; then
1406   if [ -f /usr/share/bash-completion/bash_completion ]; then
1407     . /usr/share/bash-completion/bash_completion
1408   elif [ -f /etc/bash_completion ]; then
1409     . /etc/bash_completion
1410   fi
1411 fi
1412
1413 # source Guix shell config dirs, for vte.sh and bash completions
1414 GUIX_PROFILES=("${HOME}/.guix-profile"
1415                "${HOME}/.config/guix/current")
1416 for profile in "${GUIX_PROFILES[@]}"; do
1417     for dir in "${profile}/etc/bash_completion.d" "${profile}/etc/profile.d"; do
1418         if [ -d "${dir}" ]; then
1419             for f in "${dir}"/*; do
1420                 . $f
1421             done
1422         fi
1423     done
1424 done
1425 #+end_src
1426
1427 *** profile
1428 :PROPERTIES:
1429 :header-args+: :tangle ~/.profile
1430 :END:
1431
1432 #+begin_src sh
1433 # ~/.profile: executed by the command interpreter for login shells.
1434 # This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
1435 # exists.
1436
1437 # source host-specific profile
1438 if [ -f "$HOME/.config/profiles/$(hostname)" ]; then
1439     . "$HOME/.config/profiles/$(hostname)"
1440 fi
1441
1442 export EDITOR="emacsclient -nw"
1443 export VISUAL="emcl"
1444
1445 PATH="$HOME/usr/local/bin:$HOME/.local/bin:$PATH"
1446 PATH="$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH"
1447 if [ -z "$IS_GUIX_SYSTEM" ]; then
1448     PATH="$HOME/.config/guix/current/bin${PATH:+:}$PATH"
1449     INFOPATH="$HOME/.config/guix/current/share/info${INFOPATH:+:}$INFOPATH"
1450     export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
1451 fi
1452 export PATH
1453 export INFOPATH
1454
1455 export MY_GUIX_MANIFESTS="$HOME/.config/guix/manifest"
1456 export MY_GUIX_PROFILES="$HOME/.config/guix/profile"
1457
1458 export XDG_CONFIG_HOME="$HOME/.config"
1459 export XDG_DATA_HOME="$HOME/.local/share"
1460
1461 if [ -f "$HOME/.config/user-dirs.dirs" ]; then
1462     set -a
1463     . "$HOME/.config/user-dirs.dirs"
1464     set +a
1465 fi
1466
1467 export INPUTRC="$XDG_CONFIG_HOME"/readline/inputrc
1468 export SCREENRC="$XDG_CONFIG_HOME"/screen/screenrc
1469
1470 export MAILDIR="$HOME/mail"
1471 export CVS_RSH="ssh"
1472
1473 if [ -x "$(command -v go)" ]; then
1474     export GOPATH="$HOME/src/go"
1475     export PATH="$GOPATH/bin:$PATH"
1476 fi
1477
1478 # if running bash
1479 if [ -n "$BASH_VERSION" ]; then
1480     # include .bashrc if it exists
1481     if [ -f "$HOME/.bashrc" ]; then
1482         . "$HOME/.bashrc"
1483     fi
1484 fi
1485
1486 if [ -z "$IS_GUIX_SYSTEM" ]; then
1487     # if guix is installed
1488     if [ -x "$(command -v guix)" ]; then
1489         SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
1490         if [ -d "$SSL_CERT_DIR" -o -h "$SSL_CERT_DIR" ]; then
1491             export SSL_CERT_DIR
1492             export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
1493         else
1494             printf "it seems you forgot to \`guix install nss-certs\'\n"
1495         fi
1496         GUIX_PROFILE="$HOME/.guix-profile"
1497         . "$GUIX_PROFILE/etc/profile"
1498         unset XDG_DATA_DIRS
1499     fi
1500 fi
1501
1502 for p in $MY_GUIX_PROFILES/*; do
1503     profile=$p/$(basename "$p")
1504     if [ -f "$profile"/etc/profile ]; then
1505         GUIX_PROFILE="$profile"
1506         . "$GUIX_PROFILE"/etc/profile
1507     fi
1508     unset profile
1509 done
1510
1511 # start an ssh-agent (with guix's openssh)
1512 if [ -z "$IS_GUIX_SYSTEM" ]; then
1513     if ! pgrep -u "$USER" ssh-agent > /dev/null; then
1514         ssh-agent > ~/.ssh-agent-thing
1515     fi
1516     if [[ ! "$SSH_AUTH_SOCK" ]]; then
1517         eval "$(<~/.ssh-agent-thing)"
1518     fi
1519 fi
1520
1521 # footenote: when on a foreign distro and using Xfce, don't forget to
1522 # disable its auto-start of gpg- and ssh-agent, by issuing
1523 #     xfconf-query -c xfce4-session -p /startup/ssh-agent/enabled -n -t bool -s false
1524 #     xfconf-query -c xfce4-session -p /startup/gpg-agent/enabled -n -t bool -s false
1525 # see https://docs.xfce.org/xfce/xfce4-session/advanced#ssh_and_gpg_agents
1526 # also, MATE does something similar with gnome-keyring-daemon:
1527 # http://william.shallum.net/random-notes/disabling-gnome-keyring-daemon-ssh-agent-on-mate-desktop
1528 #+end_src
1529
1530 *** per-host profiles
1531
1532 Host-specific profiles, sourced from =~/.profile=.  Each
1533 =~/.config/profiles/HOST= file will be sourced on the machine with
1534 =hostname= of =HOST=.
1535
1536 **** chaman
1537 :PROPERTIES:
1538 :header-args+: :tangle ~/.config/profiles/chaman
1539 :END:
1540
1541 #+begin_src sh
1542 export IS_GUIX_SYSTEM=true
1543
1544 if [ -x "$(command -v xinput)" ]; then
1545    xinput --set-prop "TPPS/2 IBM TrackPoint" 'libinput Accel Speed' -0.4
1546 fi
1547
1548 setxkbmap \
1549     -layout us,ir \
1550     -option ctrl:nocaps \
1551     -option grp:shifts_toggle
1552
1553 xmodmap -e "keysym Menu = Super_R"
1554
1555 xsetroot -cursor_name left_ptr
1556 xset r rate 200 45
1557 xset b off
1558 #+end_src
1559
1560 **** darrud
1561 :PROPERTIES:
1562 :header-args+: :tangle ~/.config/profiles/darrud
1563 :END:
1564
1565 #+begin_src sh
1566 export INFOPATH="$HOME/usr/local/share/info${INFOPATH:+:}$INFOPATH"
1567 #+end_src
1568
1569 **** langa
1570 :PROPERTIES:
1571 :header-args+: :tangle ~/.config/profiles/langa
1572 :END:
1573
1574 #+begin_src sh
1575 export XDG_DATA_DIRS="/usr/share/mate:/usr/local/share/:/usr/share/"
1576 #+end_src
1577
1578 ** redshift
1579 :PROPERTIES:
1580 :header-args+: :tangle ~/.config/redshift.conf :comments none
1581 :END:
1582
1583 #+begin_src conf
1584 ; Global settings for redshift
1585 [redshift]
1586 ; Set the day and night screen temperatures (Neutral is 6500K)
1587 ;temp-day=5700
1588 ;temp-night=3500
1589
1590 ;temp-day=6500
1591 temp-day=6200
1592 ;temp-night=4800
1593 ;temp-night=5000
1594 ;temp-night=4500
1595 temp-night=4000
1596
1597 ; Enable/Disable a smooth transition between day and night
1598 ; 0 will cause a direct change from day to night screen temperature.
1599 ; 1 will gradually increase or decrease the screen temperature.
1600 transition=1
1601
1602 ; Set the screen brightness. Default is 1.0.
1603 ;brightness=0.9
1604 ; It is also possible to use different settings for day and night
1605 ; since version 1.8.
1606 ;brightness-day=0.7
1607 ;brightness-night=0.4
1608 ; Set the screen gamma (for all colors, or each color channel
1609 ; individually)
1610 ;gamma=0.8
1611 ;gamma=1.0
1612 ;gamma=0.8:0.7:0.8
1613 ; This can also be set individually for day and night since
1614 ; version 1.10.
1615 ;gamma-day=0.8:0.7:0.8
1616 ;gamma-night=0.6
1617
1618 ; Set the location-provider: 'geoclue2' or 'manual'
1619 ; type 'redshift -l list' to see possible values.
1620 ; The location provider settings are in a different section.
1621 ;location-provider=manual
1622 location-provider=geoclue2
1623
1624 ; Set the adjustment-method: 'randr', 'vidmode'
1625 ; type 'redshift -m list' to see all possible values.
1626 ; 'randr' is the preferred method, 'vidmode' is an older API.
1627 ; but works in some cases when 'randr' does not.
1628 ; The adjustment method settings are in a different section.
1629 adjustment-method=randr
1630
1631 ; Configuration of the location-provider:
1632 ; type 'redshift -l PROVIDER:help' to see the settings.
1633 ; ex: 'redshift -l manual:help'
1634 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
1635 ; are negative numbers.
1636 ;[manual]
1637 ;lat=48.1
1638 ;lon=11.6
1639
1640 ; Configuration of the adjustment-method
1641 ; type 'redshift -m METHOD:help' to see the settings.
1642 ; ex: 'redshift -m randr:help'
1643 ; In this example, randr is configured to adjust screen 1.
1644 ; Note that the numbering starts from 0, so this is actually the
1645 ; second screen. If this option is not specified, Redshift will try
1646 ; to adjust _all_ screens.
1647 ;[randr]
1648 ;screen=1
1649 #+end_src
1650
1651 ** signature
1652 :PROPERTIES:
1653 :header-args+: :tangle ~/.signature
1654 :END:
1655
1656 My email signature.
1657
1658 #+begin_src
1659 Amin Bandali
1660 Free Software activist | GNU maintainer & webmaster
1661 GPG: BE62 7373 8E61 6D6D 1B3A  08E8 A21A 0202 4881 6103
1662 https://bandali.eu.org
1663 #+end_src
1664
1665 ** systemd
1666
1667 Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
1668
1669 #+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf
1670 [Service]
1671 TTYVTDisallocate=no
1672 #+end_src
1673
1674 ** TLP
1675
1676 *** darrud
1677
1678 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "darrud")) "/sudo::/etc/default/tlp")
1679 # ------------------------------------------------------------------------------
1680 # tlp - Parameters for power saving
1681 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
1682
1683 # Hint: some features are disabled by default, remove the leading # to enable
1684 # them.
1685
1686 # Set to 0 to disable, 1 to enable TLP.
1687 TLP_ENABLE=1
1688
1689 # Operation mode when no power supply can be detected: AC, BAT.
1690 # Concerns some desktop and embedded hardware only.
1691 TLP_DEFAULT_MODE=AC
1692
1693 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
1694 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
1695 TLP_PERSISTENT_DEFAULT=0
1696
1697 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
1698 # Non-zero value enables, zero disables laptop mode.
1699 DISK_IDLE_SECS_ON_AC=0
1700 DISK_IDLE_SECS_ON_BAT=2
1701
1702 # Dirty page values (timeouts in secs).
1703 MAX_LOST_WORK_SECS_ON_AC=15
1704 MAX_LOST_WORK_SECS_ON_BAT=60
1705
1706 # Hint: CPU parameters below are disabled by default, remove the leading #
1707 # to enable them, otherwise kernel default values are used.
1708
1709 # Select a CPU frequency scaling governor.
1710 # Intel Core i processor with intel_pstate driver:
1711 #   powersave(*), performance.
1712 # Older hardware with acpi-cpufreq driver:
1713 #   ondemand(*), powersave, performance, conservative, schedutil.
1714 # (*) is recommended.
1715 # Hint: use tlp-stat -p to show the active driver and available governors.
1716 # Important:
1717 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
1718 #   efficient for *almost all* workloads and therefore kernel and most
1719 #   distributions have chosen them as defaults. If you still want to change,
1720 #   you should know what you're doing! You *must* disable your distribution's
1721 #   governor settings or conflicts will occur.
1722 #CPU_SCALING_GOVERNOR_ON_AC=powersave
1723 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
1724 CPU_SCALING_GOVERNOR_ON_AC=conservative
1725 CPU_SCALING_GOVERNOR_ON_BAT=conservative
1726
1727 # Set the min/max frequency available for the scaling governor.
1728 # Possible values strongly depend on your CPU. For available frequencies see
1729 # the output of tlp-stat -p.
1730 #CPU_SCALING_MIN_FREQ_ON_AC=0
1731 #CPU_SCALING_MAX_FREQ_ON_AC=0
1732 #CPU_SCALING_MIN_FREQ_ON_BAT=0
1733 #CPU_SCALING_MAX_FREQ_ON_BAT=0
1734
1735 # Set energy performance hints (HWP) for Intel P-state governor:
1736 #   performance, balance_performance, default, balance_power, power
1737 # Values are given in order of increasing power saving.
1738 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
1739 CPU_HWP_ON_AC=balance_performance
1740 CPU_HWP_ON_BAT=balance_power
1741
1742 # Set Intel P-state performance: 0..100 (%).
1743 # Limit the max/min P-state to control the power dissipation of the CPU.
1744 # Values are stated as a percentage of the available performance.
1745 # Requires an Intel Core i processor with intel_pstate driver.
1746 #CPU_MIN_PERF_ON_AC=0
1747 #CPU_MAX_PERF_ON_AC=100
1748 #CPU_MIN_PERF_ON_BAT=0
1749 #CPU_MAX_PERF_ON_BAT=30
1750
1751 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
1752 # Requires an Intel Core i processor.
1753 # Important:
1754 # - This may conflict with your distribution's governor settings
1755 # - A value of 1 does *not* activate boosting, it just allows it
1756 #CPU_BOOST_ON_AC=1
1757 #CPU_BOOST_ON_BAT=0
1758
1759 # Minimize number of used CPU cores/hyper-threads under light load conditions:
1760 #   0=disable, 1=enable.
1761 SCHED_POWERSAVE_ON_AC=0
1762 SCHED_POWERSAVE_ON_BAT=1
1763
1764 # Kernel NMI Watchdog:
1765 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
1766 NMI_WATCHDOG=0
1767
1768 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
1769 # Frequency voltage pairs are written to:
1770 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
1771 # CAUTION: only use this, if you thoroughly understand what you are doing!
1772 #PHC_CONTROLS="F:V F:V F:V F:V"
1773
1774 # Set CPU performance versus energy savings policy:
1775 #   performance, balance-performance, default, balance-power, power.
1776 # Values are given in order of increasing power saving.
1777 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
1778 ENERGY_PERF_POLICY_ON_AC=performance
1779 ENERGY_PERF_POLICY_ON_BAT=balance-power
1780
1781 # Disk devices; separate multiple devices with spaces (default: sda).
1782 # Devices can be specified by disk ID also (lookup with: tlp diskid).
1783 DISK_DEVICES="sda sdb"
1784
1785 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
1786 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
1787 # Separate values for multiple disks with spaces. Use the special value 'keep'
1788 # to keep the hardware default for the particular disk.
1789 DISK_APM_LEVEL_ON_AC="254 254"
1790 DISK_APM_LEVEL_ON_BAT="128 128"
1791
1792 # Hard disk spin down timeout:
1793 #   0:        spin down disabled
1794 #   1..240:   timeouts from 5s to 20min (in units of 5s)
1795 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
1796 # See 'man hdparm' for details.
1797 # Separate values for multiple disks with spaces. Use the special value 'keep'
1798 # to keep the hardware default for the particular disk.
1799 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
1800 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
1801
1802 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
1803 # Separate values for multiple disks with spaces. Use the special value 'keep'
1804 # to keep the kernel default scheduler for the particular disk.
1805 #DISK_IOSCHED="cfq cfq"
1806
1807 # AHCI link power management (ALPM) for disk devices:
1808 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
1809 # (*) Kernel >= 4.15 required, then recommended.
1810 # Multiple values separated with spaces are tried sequentially until success.
1811 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
1812 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
1813
1814 # Exclude host devices from AHCI link power management.
1815 # Separate multiple hosts with spaces.
1816 #SATA_LINKPWR_BLACKLIST="host1"
1817
1818 # Runtime Power Management for AHCI host and disks devices:
1819 #   on=disable, auto=enable.
1820 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
1821 #AHCI_RUNTIME_PM_ON_AC=on
1822 #AHCI_RUNTIME_PM_ON_BAT=on
1823
1824 # Seconds of inactivity before disk is suspended.
1825 AHCI_RUNTIME_PM_TIMEOUT=15
1826
1827 # PCI Express Active State Power Management (PCIe ASPM):
1828 #   default, performance, powersave.
1829 PCIE_ASPM_ON_AC=performance
1830 PCIE_ASPM_ON_BAT=powersave
1831
1832 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
1833 # auto = mid on BAT, high on AC; default = use hardware defaults.
1834 RADEON_POWER_PROFILE_ON_AC=high
1835 RADEON_POWER_PROFILE_ON_BAT=low
1836
1837 # Radeon dynamic power management method (DPM): battery, performance.
1838 RADEON_DPM_STATE_ON_AC=performance
1839 RADEON_DPM_STATE_ON_BAT=battery
1840
1841 # Radeon DPM performance level: auto, low, high; auto is recommended.
1842 RADEON_DPM_PERF_LEVEL_ON_AC=auto
1843 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
1844
1845 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
1846 WIFI_PWR_ON_AC=off
1847 WIFI_PWR_ON_BAT=on
1848
1849 # Disable wake on LAN: Y/N.
1850 WOL_DISABLE=Y
1851
1852 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
1853 # A value of 0 disables, >=1 enables power saving (recommended: 1).
1854 SOUND_POWER_SAVE_ON_AC=0
1855 SOUND_POWER_SAVE_ON_BAT=0
1856
1857 # Disable controller too (HDA only): Y/N.
1858 SOUND_POWER_SAVE_CONTROLLER=N
1859
1860 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
1861 # Drive can be powered on again by releasing (and reinserting) the eject lever
1862 # or by pressing the disc eject button on newer models.
1863 # Note: an UltraBay/MediaBay hard disk is never powered off.
1864 BAY_POWEROFF_ON_AC=0
1865 BAY_POWEROFF_ON_BAT=0
1866 # Optical drive device to power off (default sr0).
1867 BAY_DEVICE="sr0"
1868
1869 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
1870 RUNTIME_PM_ON_AC=on
1871 RUNTIME_PM_ON_BAT=auto
1872
1873 # Exclude PCI(e) device adresses the following list from Runtime PM
1874 # (separate with spaces). Use lspci to get the adresses (1st column).
1875 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
1876 RUNTIME_PM_BLACKLIST="01:00.0"
1877
1878 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
1879 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
1880 # prevents accidential power-on of dGPU in hybrid graphics setups.
1881 # Use "" to disable the feature completely.
1882 # Separate multiple drivers with spaces.
1883 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
1884
1885 # Set to 0 to disable, 1 to enable USB autosuspend feature.
1886 USB_AUTOSUSPEND=1
1887
1888 # Exclude listed devices from USB autosuspend (separate with spaces).
1889 # Use lsusb to get the ids.
1890 # Note: input devices (usbhid) are excluded automatically
1891 #USB_BLACKLIST="1111:2222 3333:4444"
1892
1893 # Bluetooth devices are excluded from USB autosuspend:
1894 #   0=do not exclude, 1=exclude.
1895 USB_BLACKLIST_BTUSB=0
1896
1897 # Phone devices are excluded from USB autosuspend:
1898 #   0=do not exclude, 1=exclude (enable charging).
1899 USB_BLACKLIST_PHONE=0
1900
1901 # Printers are excluded from USB autosuspend:
1902 #   0=do not exclude, 1=exclude.
1903 USB_BLACKLIST_PRINTER=1
1904
1905 # WWAN devices are excluded from USB autosuspend:
1906 #   0=do not exclude, 1=exclude.
1907 USB_BLACKLIST_WWAN=1
1908
1909 # Include listed devices into USB autosuspend even if already excluded
1910 # by the blacklists above (separate with spaces).
1911 # Use lsusb to get the ids.
1912 #USB_WHITELIST="1111:2222 3333:4444"
1913
1914 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
1915 # (workaround for USB devices that cause shutdown problems).
1916 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
1917
1918 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
1919 # on system startup: 0=disable, 1=enable.
1920 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
1921 #   are ignored when this is enabled!
1922 #RESTORE_DEVICE_STATE_ON_STARTUP=0
1923 RESTORE_DEVICE_STATE_ON_STARTUP=1
1924
1925 # Radio devices to disable on startup: bluetooth, wifi, wwan.
1926 # Separate multiple devices with spaces.
1927 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
1928
1929 # Radio devices to enable on startup: bluetooth, wifi, wwan.
1930 # Separate multiple devices with spaces.
1931 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
1932
1933 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
1934 # (workaround for devices that are blocking shutdown).
1935 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
1936
1937 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
1938 # (to prevent other operating systems from missing radios).
1939 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
1940
1941 # Radio devices to enable on AC: bluetooth, wifi, wwan.
1942 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
1943
1944 # Radio devices to disable on battery: bluetooth, wifi, wwan.
1945 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
1946
1947 # Radio devices to disable on battery when not in use (not connected):
1948 #   bluetooth, wifi, wwan.
1949 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
1950
1951 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
1952 # required). Charging starts when the remaining capacity falls below the
1953 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
1954 # Main / Internal battery (values in %)
1955 #START_CHARGE_THRESH_BAT0=75
1956 #STOP_CHARGE_THRESH_BAT0=80
1957 # Ultrabay / Slice / Replaceable battery (values in %)
1958 #START_CHARGE_THRESH_BAT1=75
1959 #STOP_CHARGE_THRESH_BAT1=80
1960
1961 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
1962 #RESTORE_THRESHOLDS_ON_BAT=1
1963
1964 # ------------------------------------------------------------------------------
1965 # tlp-rdw - Parameters for the radio device wizard
1966 # Possible devices: bluetooth, wifi, wwan.
1967
1968 # Hints:
1969 # - Parameters are disabled by default, remove the leading # to enable them
1970 # - Separate multiple radio devices with spaces
1971
1972 # Radio devices to disable on connect.
1973 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
1974 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
1975 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
1976
1977 # Radio devices to enable on disconnect.
1978 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
1979 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
1980 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
1981
1982 # Radio devices to enable/disable when docked.
1983 #DEVICES_TO_ENABLE_ON_DOCK=""
1984 #DEVICES_TO_DISABLE_ON_DOCK=""
1985
1986 # Radio devices to enable/disable when undocked.
1987 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
1988 #DEVICES_TO_DISABLE_ON_UNDOCK=""
1989 #+end_src
1990
1991 ** X
1992
1993 *** xinit
1994 :PROPERTIES:
1995 :header-args+: :tangle ~/.xinitrc
1996 :END:
1997
1998 #+begin_src sh
1999 [ -f ~/.Xresources ] && xrdb -merge ~/.Xresources
2000 #+end_src
2001
2002 *** X resources
2003
2004 #+begin_src conf-xdefaults :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
2005 #include ".Xresources.d/fonts"
2006 #include ".Xresources.d/emacs"
2007 #include ".Xresources.d/rxvt-unicode"
2008 #+end_src
2009
2010 **** emacs
2011 :PROPERTIES:
2012 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
2013 :END:
2014
2015 #+begin_src conf-xdefaults
2016 Emacs.menuBar: off
2017 Emacs.toolBar: off
2018 Emacs.verticalScrollBars: off
2019 Emacs.cursorBlink: off
2020 Emacs.FontBackend: xft,x
2021 ! Emacs.font: Ubuntu Mono-12
2022 ! Emacs.font: Triplicate T4C-11
2023 ! Emacs.font: Ubuntu Mono-10.5
2024 ! Emacs.font: Ubuntu Mono-12
2025 ! Emacs.font: Iosevka-11
2026
2027 ! Emacs.font: Fira Mono:size=15
2028 ! Emacs.font: DejaVu Sans Mono:size=15
2029 ! Emacs.font: Inconsolata:size=17
2030 ! Emacs.font: Inconsolata:size=16
2031 ! Emacs.font: Inconsolata LGC:size=14
2032 ! Emacs.font: Source Code Pro Medium-10.5
2033 Emacs.font: Source Code Pro Medium:size=14
2034 ! Emacs.font: Ubuntu Mono:size=16
2035 ! Emacs.font: Iosevka:size=16
2036 #+end_src
2037
2038 **** fonts
2039 :PROPERTIES:
2040 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
2041 :END:
2042
2043 #+begin_src conf-xdefaults
2044 Xft.lcdfilter: lcddefault
2045 Xft.antialias: true
2046 Xft.autohint: 0
2047 Xft.hinting: true
2048 Xft.hintstyle: hintslight
2049 ! Xft.hintstyle: hintfull
2050 Xft.rgba: rgb
2051 Xft.dpi: 96
2052 #+end_src
2053
2054 **** rxvt-unicode
2055 :PROPERTIES:
2056 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
2057 :END:
2058
2059 #+begin_src conf-xdefaults
2060 ! Font
2061 URxvt.font:             xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
2062 URxvt.boldFont:         xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
2063 URxvt.italicFont:       xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
2064 URxvt.bolditalicFont:   xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
2065
2066 URxvt.xftAntialias:     true
2067 URxvt.letterSpace:      -1
2068
2069 !URxvt.depth:                0
2070 !URxvt.loginShell:           true
2071 !URxvt*buffered:             false
2072 URxvt.saveLines:            100000
2073 URxvt.internalBorder:       3
2074 URxvt.lineSpace:            0
2075 URxvt.scrollBar:            false
2076 URxvt.scrollStyle:          rxvt
2077 URxvt*scrollTtyOutput:      false
2078 URxvt*scrollWithBuffer:     true
2079 URxvt*scrollTtyKeypress:    true
2080 URxvt.keysym.Shift-Up:      command:\033]720;1\007
2081 URxvt.keysym.Shift-Down:    command:\033]721;1\007
2082
2083 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
2084 URxvt.url-select.launcher:  firefox
2085 URxvt.url-select.underline: true
2086 URxvt.keysym.M-u:           perl:url-select:select_next
2087 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
2088 URxvt.keysym.M-s:           perl:keyboard-select:search
2089 URxvt.url-launcher:         /usr/bin/abrowser
2090 URxvt.matcher.button:       1
2091 ! URxvt.iso14755:             false
2092 ! URxvt.iso14755_53:          false
2093 ! URxvt.keysym.M-c:           perl:clipboard:copy
2094 ! URxvt.keysym.M-v:           perl:clipboard:paste
2095 URxvt.keysym.M-c:           eval:selection_to_clipboard
2096 URxvt.keysym.M-v:           eval:paste_clipboard
2097 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
2098 ! URxvt.keysym.Shift-Control-C: eval:selection_to_clipboard
2099 ! URxvt.keysym.Shift-Control-V: eval:paste_clipboard
2100 URxvt.keysym.C-Up:          font-size:increase
2101 URxvt.keysym.C-Down:        font-size:decrease
2102 URxvt.keysym.C-S-Up:        font-size:incglobal
2103 URxvt.keysym.C-S-Down:      font-size:decglobal
2104 URxvt.keysym.C-equal:       font-size:reset
2105 !URxvt.keysym.C-question:   font-size:show
2106
2107 !URxvt.iconFile:             /usr/share/icons/elementary-xfce/apps/48/terminal.png
2108
2109 !urxvt*foreground: white
2110 !urxvt*background: black
2111
2112 !*color0:  #2E3436
2113 !*color1:  #a40000
2114 !*color2:  #4E9A06
2115 !*color3:  #C4A000
2116 !*color4:  #3465A4
2117 !*color5:  #75507B
2118 !*color6:  #ce5c00
2119 !*color7:  #babdb9
2120 !*color8:  #555753
2121 !*color9:  #EF2929
2122 !*color10: #8AE234
2123 !*color11: #FCE94F
2124 !*color12: #729FCF
2125 !*color13: #AD7FA8
2126 !*color14: #fcaf3e
2127 !*color15: #EEEEEC
2128
2129 !URxvt.foreground: #C8C8C8
2130 !URxvt.background: #FFFFFF
2131
2132 !! black
2133 !*color0:  #2E3436
2134 !*color8:  #555753
2135 !! red
2136 !*color1:  #a40000
2137 !*color9:  #EF2929
2138 !! green
2139 !*color2:  #4E9A06
2140 !*color10: #8AE234
2141 !! yellow
2142 !*color3:  #C4A000
2143 !*color11: #FCE94F
2144 !! blue
2145 !*color4:  #3465A4
2146 !*color12: #729FCF
2147 !! purple
2148 !*color5:  #75507B
2149 !*color13: #AD7FA8
2150 !! orange (replaces cyan)
2151 !*color6:  #ce5c00
2152 !*color14: #fcaf3e
2153 !! white
2154 !*color7:  #babdb9
2155 !*color15: #EEEEEC
2156
2157
2158 ! ! Solarized
2159 ! ! Base16 Solarized Light
2160 ! ! Scheme: Ethan Schoonover (http://ethanschoonover.com/solarized)
2161
2162 ! #define base00 #fdf6e3
2163 ! #define base01 #eee8d5
2164 ! #define base02 #93a1a1
2165 ! #define base03 #839496
2166 ! #define base04 #657b83
2167 ! #define base05 #586e75
2168 ! #define base06 #073642
2169 ! #define base07 #002b36
2170 ! #define base08 #dc322f
2171 ! #define base09 #cb4b16
2172 ! #define base0A #b58900
2173 ! #define base0B #859900
2174 ! #define base0C #2aa198
2175 ! #define base0D #268bd2
2176 ! #define base0E #6c71c4
2177 ! #define base0F #d33682
2178
2179 ! *foreground:   base05
2180 ! #ifdef background_opacity
2181 ! *background:   [background_opacity]base00
2182 ! #else
2183 ! *background:   base00
2184 ! #endif
2185 ! *cursorColor:  base05
2186
2187 ! *color0:       base00
2188 ! *color1:       base08
2189 ! *color2:       base0B
2190 ! *color3:       base0A
2191 ! *color4:       base0D
2192 ! *color5:       base0E
2193 ! *color6:       base0C
2194 ! *color7:       base05
2195
2196 ! *color8:       base03
2197 ! *color9:       base08
2198 ! *color10:      base0B
2199 ! *color11:      base0A
2200 ! *color12:      base0D
2201 ! *color13:      base0E
2202 ! *color14:      base0C
2203 ! *color15:      base07
2204
2205 ! ! Note: colors beyond 15 might not be loaded (e.g., xterm, urxvt),
2206 ! ! use 'shell' template to set these if necessary
2207 ! *color16:      base09
2208 ! *color17:      base0F
2209 ! *color18:      base01
2210 ! *color19:      base02
2211 ! *color20:      base04
2212 ! *color21:      base06
2213
2214
2215 ! Tango colour theme for rxvt-unicode
2216 URxvt.background: #FFFFFF
2217 URxvt.foreground: #000000
2218
2219 ! Black
2220 URxvt.color0: #2E3436
2221 URxvt.color8: #757773
2222
2223 ! Red
2224 URxvt.color1: #CC0000
2225 URxvt.color9: #EF2929
2226
2227 ! Green
2228 URxvt.color2: #4E9A06
2229 URxvt.color10: #8AE234
2230
2231 ! Yellow
2232 URxvt.color3: #C4A000
2233 URxvt.color11: #FCE94F
2234
2235 ! Blue
2236 URxvt.color4: #3465A4
2237 URxvt.color12: #729FCF
2238
2239 ! Magenta
2240 URxvt.color5: #75507B
2241 URxvt.color13: #AD7FA8
2242
2243 !! Cyan
2244 !URxvt.color6: #06989A
2245 !URxvt.color14: #34E2E2
2246 ! orange (replaces cyan)
2247 ,,*color6:  #ce5c00
2248 ,,*color14: #fcaf3e
2249
2250 ! White
2251 URxvt.color7: #D3D7CF
2252 URxvt.color15: #EEEEEC
2253 #+end_src
2254
2255 *** ~/.xsession
2256 :PROPERTIES:
2257 :header-args+: :tangle ~/.xsession :tangle-mode (identity #o755)
2258 :END:
2259
2260 For custom session on Debian.  See https://wiki.debian.org/Xsession.
2261
2262 #+begin_src sh
2263 if [ -f "$HOME/.xinitrc" ]; then
2264         . "$HOME/.xinitrc"
2265 fi
2266
2267 [ -f "/usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd" ] && /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd &
2268 [ -x "$(command -v light-locker)" ] && light-locker --lock-on-suspend &
2269 [ -x "$(command -v pasystray)" ] && pasystray -a &
2270 [ -x "$(command -v nm-applet)" ] && nm-applet &
2271 [ -x "$(command -v compton)" ] && compton &
2272 [ -x "$(command -v dunst)" ] && dunst &
2273 [ -x "$(command -v emacs)" ] && exec ssh-agent exwm -ib 0
2274 #+end_src
2275
2276 *** ~/.xsessionrc
2277 :PROPERTIES:
2278 :header-args+: :tangle ~/.xsessionrc
2279 :END:
2280
2281 #+begin_src sh
2282 if [ -f "$HOME/.profile" ]; then . "$HOME/.profile"; fi
2283 #+end_src
2284
2285 ** XDG
2286 :PROPERTIES:
2287 :header-args+: :tangle ~/.config/user-dirs.dirs
2288 :END:
2289
2290 #+begin_src conf
2291 XDG_DESKTOP_DIR="$HOME/Desktop"
2292 XDG_DOCUMENTS_DIR="$HOME/usr/doc"
2293 XDG_DOWNLOAD_DIR="$HOME/usr/dl"
2294 XDG_MUSIC_DIR="$HOME/usr/music"
2295 XDG_PICTURES_DIR="$HOME/usr/pic"
2296 XDG_PUBLICSHARE_DIR="$HOME/usr/pub"
2297 XDG_TEMPLATES_DIR="$HOME/usr/temp"
2298 XDG_VIDEOS_DIR="$HOME/usr/vid"
2299 #+end_src
2300
2301 ** zathura
2302 :PROPERTIES:
2303 :header-args+: :tangle ~/.config/zathura/zathurarc
2304 :END:
2305
2306 #+begin_src conf
2307 set smooth-scroll true
2308 set selection-clipboard clipboard
2309 set zoom-step 05
2310 set default-bg "#272727"
2311 set statusbar-bg "#272727"
2312 set inputbar-bg "#373737"
2313 set window-title-basename true
2314 set statusbar-home-tilde true
2315
2316 map <Return> scroll down
2317 map <A-Return> scroll up
2318
2319 map H jumplist backward
2320 map L jumplist forward
2321
2322 map [normal] i toggle_index
2323 map [index] i toggle_index
2324 map [index] q toggle_index
2325 #+end_src
2326
2327 * Scripts
2328
2329 This section contains various useful scripts including ones used by
2330 the programs above.  For instance, =toggle-tablet= for switching to
2331 and from tablet mode on my X220T, =toggle-presentation-mode= for
2332 toggling Xfce's presentation mode which keeps the screen awake, and
2333 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
2334 exact brightness value.
2335
2336 ** battery-percentage-time
2337 :PROPERTIES:
2338 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
2339 :END:
2340
2341 #+begin_src sh :tangle no
2342 dbus_send() {
2343         label=$1
2344         dbus-send --print-reply=literal --system \
2345                 --dest=org.freedesktop.UPower \
2346                 /org/freedesktop/UPower/devices/battery_BAT0 \
2347                 org.freedesktop.DBus.Properties.Get \
2348                 string:org.freedesktop.UPower.Device \
2349                 string:"${label}" | awk '{print $3}'
2350 }
2351
2352 perc=$(dbus_send 'Percentage')
2353 state=$(dbus_send 'State')
2354
2355 if [ "$state" -eq 2 ]; then  # Discharging
2356         secs=$(dbus_send 'TimeToEmpty')
2357 elif [ "$state" -eq 1 ]; then  # Charging
2358         secs=$(dbus_send 'TimeToFull')
2359 fi
2360
2361 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
2362 #+end_src
2363
2364 ** emcl
2365 :PROPERTIES:
2366 :header-args+: :tangle ~/.local/bin/emcl :shebang "#!/bin/sh"
2367 :END:
2368
2369 #+begin_src sh
2370 exec emacsclient --alternate-editor="" -c "$@"
2371 #+end_src
2372
2373 ** my-i3status
2374 :PROPERTIES:
2375 :header-args+: :tangle ~/.local/bin/emcl :shebang "#!/usr/bin/env python2"
2376 :END:
2377
2378 #+begin_src python
2379 # -*- coding: utf-8 -*-
2380
2381 # This script is a simple wrapper which prefixes each i3status line with custom
2382 # information. It is based on:
2383 # https://github.com/i3/i3status/blob/master/contrib/wrapper.py
2384 #
2385 # In ~/.i3status.conf, add the following line:
2386 #     output_format = "i3bar"
2387 # in the 'general' section.
2388 # Then, in ~/.config/i3/config or ~/.config/sway/config add:
2389 #     status_command i3status | my-i3status.py
2390 # in the 'bar' section.  Make sure my-i3status.py is in $PATH.
2391 #
2392 # © 2012 Valentin Haenel <valentin.haenel@gmx.de>
2393 # © 2018 Amin Bandali <bandali@gnu.org>
2394 #
2395 # This program is free software. It comes without any warranty, to the extent
2396 # permitted by applicable law. You can redistribute it and/or modify it under
2397 # the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
2398 # 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
2399 # details.
2400
2401 import sys
2402 import json
2403 import os
2404
2405 def get_nosleep():
2406     """ Return true if ~/.nosleep exists. """
2407     return os.path.isfile(os.path.expanduser("~/.nosleep"))
2408
2409 def print_line(message):
2410     """ Non-buffered printing to stdout. """
2411     sys.stdout.write(message + '\n')
2412     sys.stdout.flush()
2413
2414 def read_line():
2415     """ Interrupted respecting reader for stdin. """
2416     # try reading a line, removing any extra whitespace
2417     try:
2418         line = sys.stdin.readline().strip()
2419         # i3status sends EOF, or an empty line
2420         if not line:
2421             sys.exit(3)
2422         return line
2423     # exit on ctrl-c
2424     except KeyboardInterrupt:
2425         sys.exit()
2426
2427 if __name__ == '__main__':
2428     # Skip the first line which contains the version header.
2429     print_line(read_line())
2430
2431     # The second line contains the start of the infinite array.
2432     print_line(read_line())
2433
2434     while True:
2435         line, prefix = read_line(), ''
2436         # ignore comma at start of lines
2437         if line.startswith(','):
2438             line, prefix = line[1:], ','
2439
2440         if get_nosleep():
2441             j = json.loads(line)
2442             # insert information into the start of the json, but could be anywhere
2443             j.insert(0, {'full_text' : '•', 'name' : 'nosleep'})
2444             # and echo back new encoded json
2445             print_line(prefix+json.dumps(j))
2446         else:
2447             print_line(prefix+line)
2448 #+end_src
2449
2450 ** rofi-light
2451 :PROPERTIES:
2452 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/sh"
2453 :END:
2454
2455 #+begin_src sh
2456 cur=$(light -G)
2457 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
2458 [ -n "$val" ] && light -S "$val"
2459 #+end_src
2460
2461 ** rofi-remmina
2462 :PROPERTIES:
2463 :header-args+: :tangle ~/.local/bin/rofi-remmina :shebang "#!/usr/bin/env python2"
2464 :END:
2465
2466 #+begin_src python
2467 import ConfigParser
2468 import os
2469 from subprocess import Popen, PIPE
2470
2471 remmina_dir = os.path.expanduser("~/.local/share/remmina")
2472
2473 fdict = dict()
2474
2475 for f in os.listdir(remmina_dir):
2476     fp = os.path.join(remmina_dir, f)
2477     c = ConfigParser.ConfigParser()
2478     c.read(fp)
2479     n = c.get('remmina', 'name')
2480     fdict[n] = fp
2481
2482 lines = max(min(15, len(fdict)), 1);
2483 width = len(max(fdict.keys(), key=len))
2484 rofi = Popen(["rofi", "-i", "-dmenu", \
2485               "-l", str(lines), "-width", str(width), \
2486               "-p", "connection"], stdout=PIPE, stdin=PIPE)
2487 selected = rofi.communicate("\n" \
2488                             .join(fdict.keys()) \
2489                             .encode("utf-8"))[0] \
2490                .decode("utf-8") \
2491                .strip()
2492 rofi.wait()
2493
2494 r = Popen(["remmina", "-c", fdict[selected]])
2495 r.wait()
2496 #+end_src
2497
2498 ** toggle-presentation-mode
2499 :PROPERTIES:
2500 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/sh"
2501 :END:
2502
2503 #+begin_src sh
2504 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
2505 #+end_src
2506
2507 ** toggle-tablet
2508 :PROPERTIES:
2509 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/sh"
2510 :END:
2511
2512 #+begin_src sh
2513 # This script toggles between a 'normal' mode and a 'tablet' mode, doing
2514 # a few things:
2515
2516 # - rotates the screen using =xrandr=, so that rotating the physical
2517 #   display of my X220t would have the laptop's battery on the right
2518 #   hand side,
2519 # - enables touch screen,
2520 # - properly rotates the stylus pen and touch screen pointers, and
2521 # - toggles between RGB and Vertical BGR sub-pixel order.
2522
2523 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
2524     0)  # Screen is not rotated, we should rotate it right (90°)
2525         xrandr -o 3
2526         xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
2527         xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
2528         xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
2529         xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
2530         ;;
2531     1)  # Currently top is rotated right, we should set it normal (0°)
2532         xrandr -o 0
2533         xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
2534         xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
2535         xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
2536         xfconf-query -c xsettings -p /Xft/RGBA -s rgb
2537         ;;
2538     ,*)
2539         echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
2540         exit 1
2541         ;;
2542 esac
2543 #+end_src
2544
2545 ** volume-info
2546 :PROPERTIES:
2547 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
2548 :END:
2549
2550 #+begin_src sh
2551 cur_vol=$(pamixer --get-volume)
2552
2553 if [ $(pamixer --get-mute) = true ]; then
2554   printf 'mt \n' "$cur_vol"
2555 else
2556   printf '%02d \n' "$cur_vol"
2557 fi
2558 #+end_src
2559
2560 ** zathura-sync
2561 :PROPERTIES:
2562 :header-args+: :tangle ~/.local/bin/zathura-sync :shebang "#!/bin/sh"
2563 :END:
2564
2565 #+begin_src sh
2566 pos="$1"
2567 pdffile="$2"
2568 zathura --synctex-forward "$pos" "$pdffile" || \
2569     (
2570     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
2571     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
2572 #+end_src