git.shemshak.org - ~bandali/configs/blob - .config/mpd/mpd.conf

   1 # An example configuration file for MPD.
   2 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
   3
   4
   5 # Files and directories #######################################################
   6 #
   7 # This setting controls the top directory which MPD will search to discover the
   8 # available audio files and add them to the daemon's online database. This
   9 # setting defaults to the XDG directory, otherwise the music directory will be
  10 # be disabled and audio files will only be accepted over ipc socket (using
  11 # file:// protocol) or streaming files over an accepted protocol.
  12 #
  13 music_directory         "~/u/music"
  14 #
  15 # This setting sets the MPD internal playlist directory. The purpose of this
  16 # directory is storage for playlists created by MPD. The server will use
  17 # playlist files not created by the server but only if they are in the MPD
  18 # format. This setting defaults to playlist saving being disabled.
  19 #
  20 playlist_directory              "~/.mpd/playlists"
  21 #
  22 # This setting sets the location of the MPD database. This file is used to
  23 # load the database at server start up and store the database while the
  24 # server is not up. This setting defaults to disabled which will allow
  25 # MPD to accept files over ipc socket (using file:// protocol) or streaming
  26 # files over an accepted protocol.
  27 #
  28 db_file                 "~/.mpd/database"
  29 #
  30 # These settings are the locations for the daemon log files for the daemon.
  31 # These logs are great for troubleshooting, depending on your log_level
  32 # settings.
  33 #
  34 # The special value "syslog" makes MPD use the local syslog daemon. This
  35 # setting defaults to logging to syslog, otherwise logging is disabled.
  36 #
  37 log_file                        "~/.mpd/log"
  38 #
  39 # This setting sets the location of the file which stores the process ID
  40 # for use of mpd --kill and some init scripts. This setting is disabled by
  41 # default and the pid file will not be stored.
  42 #
  43 pid_file                        "~/.mpd/pid"
  44 #
  45 # This setting sets the location of the file which contains information about
  46 # most variables to get MPD back into the same general shape it was in before
  47 # it was brought down. This setting is disabled by default and the server
  48 # state will be reset on server start up.
  49 #
  50 state_file                      "~/.mpd/state"
  51 #
  52 # The location of the sticker database.  This is a database which
  53 # manages dynamic information attached to songs.
  54 #
  55 sticker_file                    "~/.mpd/sticker.sql"
  56 #
  57 ###############################################################################
  58
  59
  60 # General music daemon options ################################################
  61 #
  62 # This setting specifies the user that MPD will run as. MPD should never run as
  63 # root and you may use this setting to make MPD change its user ID after
  64 # initialization. This setting is disabled by default and MPD is run as the
  65 # current user.
  66 #
  67 #user                           "nobody"
  68 #
  69 # This setting specifies the group that MPD will run as. If not specified
  70 # primary group of user specified with "user" setting will be used (if set).
  71 # This is useful if MPD needs to be a member of group such as "audio" to
  72 # have permission to use sound card.
  73 #
  74 #group                          "nogroup"
  75 #
  76 # This setting sets the address for the daemon to listen on. Careful attention
  77 # should be paid if this is assigned to anything other then the default, any.
  78 # This setting can deny access to control of the daemon. Not effective if
  79 # systemd socket activiation is in use.
  80 #
  81 # For network
  82 #bind_to_address                "any"
  83 #
  84 # And for Unix Socket
  85 #bind_to_address                "~/.mpd/socket"
  86 #
  87 # This setting is the TCP port that is desired for the daemon to get assigned
  88 # to.
  89 #
  90 #port                           "6600"
  91 #
  92 # This setting controls the type of information which is logged. Available
  93 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
  94 # argument is recommended for troubleshooting, though can quickly stretch
  95 # available resources on limited hardware storage.
  96 #
  97 #log_level                      "default"
  98 #
  99 # If you have a problem with your MP3s ending abruptly it is recommended that
 100 # you set this argument to "no" to attempt to fix the problem. If this solves
 101 # the problem, it is highly recommended to fix the MP3 files with vbrfix
 102 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
 103 # point gapless MP3 playback can be enabled.
 104 #
 105 #gapless_mp3_playback                   "yes"
 106 #
 107 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
 108 # of starting playback after startup.
 109 #
 110 #restore_paused "no"
 111 #
 112 # This setting enables MPD to create playlists in a format usable by other
 113 # music players.
 114 #
 115 #save_absolute_paths_in_playlists       "no"
 116 #
 117 # This setting defines a list of tag types that will be extracted during the
 118 # audio file discovery process. The complete list of possible values can be
 119 # found in the user manual.
 120 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
 121 #
 122 # This setting enables automatic update of MPD's database when files in
 123 # music_directory are changed.
 124 #
 125 #auto_update    "yes"
 126 #
 127 # Limit the depth of the directories being watched, 0 means only watch
 128 # the music directory itself.  There is no limit by default.
 129 #
 130 #auto_update_depth "3"
 131 #
 132 ###############################################################################
 133
 134
 135 # Symbolic link behavior ######################################################
 136 #
 137 # If this setting is set to "yes", MPD will discover audio files by following
 138 # symbolic links outside of the configured music_directory.
 139 #
 140 #follow_outside_symlinks        "yes"
 141 #
 142 # If this setting is set to "yes", MPD will discover audio files by following
 143 # symbolic links inside of the configured music_directory.
 144 #
 145 #follow_inside_symlinks         "yes"
 146 #
 147 ###############################################################################
 148
 149
 150 # Zeroconf / Avahi Service Discovery ##########################################
 151 #
 152 # If this setting is set to "yes", service information will be published with
 153 # Zeroconf / Avahi.
 154 #
 155 #zeroconf_enabled               "yes"
 156 #
 157 # The argument to this setting will be the Zeroconf / Avahi unique name for
 158 # this MPD server on the network.
 159 #
 160 #zeroconf_name                  "Music Player"
 161 #
 162 ###############################################################################
 163
 164
 165 # Permissions #################################################################
 166 #
 167 # If this setting is set, MPD will require password authorization. The password
 168 # setting can be specified multiple times for different password profiles.
 169 #
 170 #password                        "password@read,add,control,admin"
 171 #
 172 # This setting specifies the permissions a user has who has not yet logged in.
 173 #
 174 #default_permissions             "read,add,control,admin"
 175 #
 176 ###############################################################################
 177
 178
 179 # Database #######################################################################
 180 #
 181
 182 #database {
 183 #       plugin "proxy"
 184 #       host "other.mpd.host"
 185 #       port "6600"
 186 #}
 187
 188 # Input #######################################################################
 189 #
 190
 191 input {
 192         plugin "curl"
 193 #       proxy "proxy.isp.com:8080"
 194 #       proxy_user "user"
 195 #       proxy_password "password"
 196 }
 197
 198 #
 199 ###############################################################################
 200
 201 # Audio Output ################################################################
 202 #
 203
 204 audio_output {
 205     type    "pulse"
 206     name    "pulse audio"
 207 }
 208
 209 audio_output {
 210     type    "fifo"
 211     name    "my_fifo"
 212     path    "/tmp/mpd.fifo"
 213     format  "44100:16:2"
 214 }
 215
 216 # MPD supports various audio output types, as well as playing through multiple
 217 # audio outputs at the same time, through multiple audio_output settings
 218 # blocks. Setting this block is optional, though the server will only attempt
 219 # autodetection for one sound card.
 220 #
 221 # An example of an ALSA output:
 222 #
 223 #audio_output {
 224 #       type            "alsa"
 225 #       name            "My ALSA Device"
 226 ##      device          "hw:0,0"        # optional
 227 ##      mixer_type      "hardware"      # optional
 228 ##      mixer_device    "default"       # optional
 229 ##      mixer_control   "PCM"           # optional
 230 ##      mixer_index     "0"             # optional
 231 #}
 232 #
 233 # An example of an OSS output:
 234 #
 235 #audio_output {
 236 #       type            "oss"
 237 #       name            "My OSS Device"
 238 ##      device          "/dev/dsp"      # optional
 239 ##      mixer_type      "hardware"      # optional
 240 ##      mixer_device    "/dev/mixer"    # optional
 241 ##      mixer_control   "PCM"           # optional
 242 #}
 243 #
 244 # An example of a shout output (for streaming to Icecast):
 245 #
 246 #audio_output {
 247 #       type            "shout"
 248 #       encoder         "vorbis"                # optional
 249 #       name            "My Shout Stream"
 250 #       host            "localhost"
 251 #       port            "8000"
 252 #       mount           "/mpd.ogg"
 253 #       password        "hackme"
 254 #       quality         "5.0"
 255 #       bitrate         "128"
 256 #       format          "44100:16:1"
 257 ##      protocol        "icecast2"              # optional
 258 ##      user            "source"                # optional
 259 ##      description     "My Stream Description" # optional
 260 ##      url             "http://example.com"    # optional
 261 ##      genre           "jazz"                  # optional
 262 ##      public          "no"                    # optional
 263 ##      timeout         "2"                     # optional
 264 ##      mixer_type      "software"              # optional
 265 #}
 266 #
 267 # An example of a recorder output:
 268 #
 269 #audio_output {
 270 #       type            "recorder"
 271 #       name            "My recorder"
 272 #       encoder         "vorbis"                # optional, vorbis or lame
 273 #       path            "/var/lib/mpd/recorder/mpd.ogg"
 274 ##      quality         "5.0"                   # do not define if bitrate is defined
 275 #       bitrate         "128"                   # do not define if quality is defined
 276 #       format          "44100:16:1"
 277 #}
 278 #
 279 # An example of a httpd output (built-in HTTP streaming server):
 280 #
 281 #audio_output {
 282 #       type            "httpd"
 283 #       name            "My HTTP Stream"
 284 #       encoder         "vorbis"                # optional, vorbis or lame
 285 #       port            "8000"
 286 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
 287 ##      quality         "5.0"                   # do not define if bitrate is defined
 288 #       bitrate         "128"                   # do not define if quality is defined
 289 #       format          "44100:16:1"
 290 #       max_clients     "0"                     # optional 0=no limit
 291 #}
 292 #
 293 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
 294 #
 295 #audio_output {
 296 #       type            "pulse"
 297 #       name            "My Pulse Output"
 298 ##      server          "remote_server"         # optional
 299 ##      sink            "remote_server_sink"    # optional
 300 #}
 301 #
 302 # An example of a winmm output (Windows multimedia API).
 303 #
 304 #audio_output {
 305 #       type            "winmm"
 306 #       name            "My WinMM output"
 307 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
 308 #               or
 309 ##      device          "0"             # optional
 310 ##      mixer_type      "hardware"      # optional
 311 #}
 312 #
 313 # An example of an openal output.
 314 #
 315 #audio_output {
 316 #       type            "openal"
 317 #       name            "My OpenAL output"
 318 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
 319 #}
 320 #
 321 # An example of an sndio output.
 322 #
 323 #audio_output {
 324 #       type            "sndio"
 325 #       name            "sndio output"
 326 #       mixer_type      "software"
 327 #}
 328 #
 329 # An example of an OS X output:
 330 #
 331 #audio_output {
 332 #       type            "osx"
 333 #       name            "My OS X Device"
 334 ##      device          "Built-in Output"       # optional
 335 ##      channel_map      "-1,-1,0,1"    # optional
 336 #}
 337 #
 338 ## Example "pipe" output:
 339 #
 340 #audio_output {
 341 #       type            "pipe"
 342 #       name            "my pipe"
 343 #       command         "aplay -f cd 2>/dev/null"
 344 ## Or if you're want to use AudioCompress
 345 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
 346 ## Or to send raw PCM stream through PCM:
 347 #       command         "nc example.org 8765"
 348 #       format          "44100:16:2"
 349 #}
 350 #
 351 ## An example of a null output (for no audio output):
 352 #
 353 #audio_output {
 354 #       type            "null"
 355 #       name            "My Null Output"
 356 #       mixer_type      "none"                  # optional
 357 #}
 358 #
 359 ###############################################################################
 360
 361
 362 # Normalization automatic volume adjustments ##################################
 363 #
 364 # This setting specifies the type of ReplayGain to use. This setting can have
 365 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
 366 # chooses between "track" and "album" depending on the current state of
 367 # random playback. If random playback is enabled then "track" mode is used.
 368 # See <http://www.replaygain.org> for more details about ReplayGain.
 369 # This setting is off by default.
 370 #
 371 #replaygain                     "album"
 372 #
 373 # This setting sets the pre-amp used for files that have ReplayGain tags. By
 374 # default this setting is disabled.
 375 #
 376 #replaygain_preamp              "0"
 377 #
 378 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
 379 # By default this setting is disabled.
 380 #
 381 #replaygain_missing_preamp      "0"
 382 #
 383 # This setting enables or disables ReplayGain limiting.
 384 # MPD calculates actual amplification based on the ReplayGain tags
 385 # and replaygain_preamp / replaygain_missing_preamp setting.
 386 # If replaygain_limit is enabled MPD will never amplify audio signal
 387 # above its original level. If replaygain_limit is disabled such amplification
 388 # might occur. By default this setting is enabled.
 389 #
 390 #replaygain_limit               "yes"
 391 #
 392 # This setting enables on-the-fly normalization volume adjustment. This will
 393 # result in the volume of all playing audio to be adjusted so the output has
 394 # equal "loudness". This setting is disabled by default.
 395 #
 396 #volume_normalization           "no"
 397 #
 398 ###############################################################################
 399
 400 # Character Encoding ##########################################################
 401 #
 402 # If file or directory names do not display correctly for your locale then you
 403 # may need to modify this setting.
 404 #
 405 #filesystem_charset             "UTF-8"
 406 #
 407 ###############################################################################