[emacs/org] modern html5 export
[~bandali/configs] / rc.org
1 #+title: rc.org
2 #+property: header-args :comments link :mkdirp yes :results silent
3
4 * About
5
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
9
10 Note: This file is best viewed inside Emacs with org mode.
11
12 * Configs
13
14 This section contains the configuration files (dotfiles) of various
15 programs I use.
16
17 ** bspwm
18
19 *** bspwmrc
20 :PROPERTIES:
21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22 :END:
23
24 #+begin_src sh
25 sxhkd &
26 sh ~/.fehbg &
27 xfce4-panel -d &
28 compton &
29 sleep 0.5 && pasystray --notify=all &
30
31 bspc monitor -d I II III IV V VI VII VIII IX X
32 #bspc monitor eDP-1 -d I II III IV V
33 #bspc monitor HDMI-1 -d VI VII VIII IX X
34
35 #bspc config border_width 2
36 #bspc config window_gap 8
37 bspc config window_gap 0
38
39 bspc config bottom_padding 26
40
41 bspc config split_ratio 0.52
42 bspc config borderless_monocle true
43 bspc config gapless_monocle true
44 bspc config click_to_focus button1
45 bspc config directional_focus_tightness low
46
47 #bspc rule -a Firefox desktop='^1' follow=on
48 bspc rule -a Nightly desktop='^1' follow=on
49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
50 #bspc rule -a Chromium desktop='^4' follow=on
51 bspc rule -a URxvt state=floating
52 bspc rule -a URxvt:tiled state=tiled
53 bspc rule -a Connman-gtk state=floating
54 bspc rule -a Xfce4-panel state=floating
55 bspc rule -a TelegramDesktop state=floating
56 bspc rule -a Ec state=floating
57 bspc rule -a Pavucontrol state=floating
58 bspc rule -a Eog state=floating
59 bspc rule -a Seahorse state=floating
60 bspc rule -a mpv state=floating
61 bspc rule -a Evince state=floating
62 bspc rule -a Meld state=floating
63 bspc rule -a Autokey-gtk state=floating
64 bspc rule -a Mousepad state=floating
65 bspc rule -a Wrapper-1.0 state=floating
66 bspc rule -a File-roller state=floating
67 bspc rule -a Gnome-disks state=floating
68 bspc rule -a Termite state=floating
69 bspc rule -a Termite:tiled state=tiled
70 bspc rule -a Thunderbird:Calendar state=floating
71 bspc rule -a Audacity state=floating
72 bspc rule -a Proof state=floating # pvs x-show-proof
73 bspc rule -a Nm-connection-editor state=floating
74 bspc rule -a Wire state=floating
75 bspc rule -a discord state=floating
76 bspc rule -a X2goclient state=floating
77 bspc rule -a SimpleScreenRecorder state=floating
78 bspc rule -a Gimp state=floating
79 bspc rule -a Wrapper-2.0 state=floating
80 bspc rule -a Zathura state=tiled
81 #+end_src
82
83 *** sxhkdrc
84 :PROPERTIES:
85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86 :END:
87
88 #+begin_src conf
89 #
90 # wm independent hotkeys
91 #
92
93 # terminal emulator
94 super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97 #super + {_,shift} + Return
98 # termite{_, --name=tiled}
99
100 # program launcher
101 super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104 super + alt + space
105 xfce4-popup-whiskermenu
106
107 # window finder
108 super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111 # password manager
112 alt + space
113 rofi-pass
114
115 # firefox
116 #super + r
117 # firefox
118
119 # chromium
120 #super + c
121 # chromium -incognito
122
123 # emacs
124 super + e
125 emacs
126
127 # make sxhkd reload its configuration files:
128 super + Escape
129 pkill -USR1 -x sxhkd
130
131 # volume {up,down}
132 XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135 # mute
136 XF86AudioMute
137 pamixer --toggle-mute
138
139 XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142 # playback control
143 XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146 # lock the screen
147 super + shift + q
148 light-locker-command -l
149
150 # Toggle keyboard layout
151 super + F7
152 toggle-layout
153
154 # Toggle Xfce presentation mode
155 XF86LaunchB
156 toggle-presentation-mode
157
158 # monitor brightness
159 XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162 super + apostrophe
163 rofi-light
164
165 # keyboard brightness
166 #XF86KbdBrightness{Up,Down}
167 # kbdlight {up,down}
168
169 XF86RotateWindows
170 toggle-tablet
171
172 #
173 # bspwm hotkeys
174 #
175
176 # quit bspwm normally
177 super + alt + Escape
178 bspc quit
179
180 # close and kill
181 super + {w,q}
182 bspc node -{c,k}
183
184 # alternate between the tiled and monocle layout
185 super + m
186 bspc desktop -l next
187
188 # send the newest marked node to the newest preselected node
189 super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192 # swap the current node and the biggest node
193 super + g
194 bspc node -s biggest
195
196 #
197 # state/flags
198 #
199
200 # set the window state
201 super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204 # set the node flags
205 super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208 #
209 # focus/swap
210 #
211
212 # focus the node in the given direction
213 super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216 # focus the node for the given path jump
217 super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220 # focus the next/previous node in the current desktop
221 super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224 # focus the next/previous desktop in the current monitor
225 super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228 # send to next/prev desktop
229 super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232 # focus the last node/desktop
233 super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236 # focus the older or newer node in the focus history
237 super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242 # focus or send to the given desktop
243 super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246 #
247 # preselect
248 #
249
250 # preselect the direction
251 super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254 # preselect the ratio
255 super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258 # cancel the preselection for the focused node
259 super + ctrl + space
260 bspc node -p cancel
261
262 # cancel the preselection for the focused desktop
263 super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266 #
267 # move/resize
268 #
269
270 # expand a window by moving one of its side outward
271 super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274 # contract a window by moving one of its side inward
275 super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278 # move a floating window
279 super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282 #alt + bracket{left,right}
283 # xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284 #+end_src
285
286 ** compton
287 :PROPERTIES:
288 :header-args+: :tangle ~/.config/compton.conf
289 :END:
290
291 #+begin_src conf
292 # Shadow
293 shadow = false; # Enabled client-side shadows on windows.
294 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295 no-dnd-shadow = true; # Don't draw shadows on DND windows.
296 clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298 shadow-radius = 5; # The blur radius for shadows. (default 12)
299 shadow-offset-x = -5; # The left offset for shadows. (default -15)
300 shadow-offset-y = -5; # The top offset for shadows. (default -15)
301 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306 # shadow-exclude = "n:e:Notification";
307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311 # Opacity
312 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323 # blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326 # blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332 # Fading
333 fading = false; # Fade windows during opacity changes.
334 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338 fade-exclude = [ ]; # Exclude conditions for fading.
339
340 # Other
341 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355 dbe = false; # Enable DBE painting mode. Rarely needed.
356 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368 # GLX backend # GLX backend fine-tune options. See man page for more info.
369 glx-no-stencil = true; # Recommended.
370 glx-copy-from-front = false; # Useful with --glx-swap-method,
371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372 # glx-no-rebind-pixmap = true; # Recommended if it works.
373 glx-no-rebind-pixmap = true; # Recommended if it works.
374 #glx-swap-method = "4"; # See man page.
375 glx-swap-method = "4"; # See man page.
376
377 # Window type settings
378 wintypes:
379 {
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389 };
390 #+end_src
391
392 ** Dunst
393 :PROPERTIES:
394 :header-args+: :tangle ~/.config/dunst/dunstrc
395 :END:
396
397 #+begin_src conf
398 [global]
399 #font = Ubuntu Mono 10.5
400 font = Inconsolata 11
401
402 # Path to default icons.
403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405 icon_position = left
406 # <b>bold</b>
407 # <i>italic</i>
408 # <s>strikethrough<s/>
409 # <u>underline</u>
410 markup = full
411 # The format of the message. Possible variables are:
412 # %a appname
413 # %s summary
414 # %b body
415 # %i iconname (including its path)
416 # %I iconname (without its path)
417 # %p progress value if set ([ 0%] to [100%]) or nothing
418 # Markup is allowed
419 format = "<b>%s</b>\n%b"
420 # Sort messages by urgency
421 sort = yes
422 # Show how many messages are currently hidden (because of geometry)
423 indicate_hiddenl= no
424 # Alignment of message text.
425 # Possible values are "left", "center" and "right"
426 alignment = center
427 # The frequency with wich text that is longer than the notification
428 # window allows bounces back and forth.
429 # This option conflicts with 'word_wrap'.
430 # Set to 0 to disable
431 bounce_freq = 3
432 # show age of message if message is older than show_age_threshold seconds.
433 # set to -1 to disable
434 show_age_threshold = -1
435 # split notifications into multiple lines if they don't fit into geometry
436 word_wrap = yes
437 # ignore newlines '\n' in notifications
438 ignore_newline = no
439 # The geometry of the message window.
440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
441 # The height is measured in number of notifications everything else in pixels. If the width
442 # is omitted but the height is given ("-geometry x2"), the message window
443 # expands over the whole screen (dmenu-like). If width is 0,
444 # the window expands to the longest message displayed.
445 # A positive x is measured from the left, a negative from the
446 # right side of the screen. Y is measured from the top and down respectevly.
447 # The width can be negative. In this case the actual width is the
448 # screen width minus the width defined in within the geometry option.
449 #geometry = "410x12-12+12"
450 #geometry = "0x0-30-30"
451 geometry = "260x12-30-30"
452 # The transparency of the window. range: [0; 100]
453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454 transparency = 0
455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
456 # for longer than idle_threshold seconds.
457 # Set to 0 to disable.
458 idle_threshold = 120
459 # Which monitor should the notifications be displayed on.
460 monitor = 0
461 # Display notification on focused monitor. Possible modes are:
462 # mouse: follow mouse pointer
463 # keyboard: follow window with keyboard focus
464 # none: don't follow anything
465 #
466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467 # This should be the case for almost all modern windowmanagers.
468 #
469 # If this option is set to mouse or keyboard, the monitor option will be
470 # ignored.
471 follow = keyboard
472 # should a notification popped up from history be sticky or
473 # timeout as if it would normally do.
474 sticky_history = yes
475 # The height of a single line. If the height is smaller than the font height,
476 # it will get raised to the font height.
477 # This adds empty space above and under the text.
478 line_height = 0
479
480 show_indicators = yes
481
482 # Draw a line of 'separatpr_height' pixel height between two notifications.
483 # Set to 0 to disable
484 separator_height = 3
485 # padding between text and separator
486 padding = 8
487 # horizontal padding
488 horizontal_padding = 8
489 # Define a color for the separator.
490 # possible values are:
491 # * auto: dunst tries to find a color fitting to the background
492 # * foreground: use the same color as the foreground
493 # * frame: use the same color as the frame.
494 # * anything else will be interpreted as a X color
495 separator_color = foreground
496 # print a notification on startup
497 # This is mainly for error detection, since dbus (re-)starts dunst
498 # automatically after a crash.
499 startup_notification = false
500 # dmenu path
501 #dmenu = /usr/bin/dmenu -p dunst:
502 dmenu = /usr/bin/rofi -dmenu -p dunst:
503 # browser for opening urls in context menu
504 browser = /usr/bin/firefox -new-tab
505 [frame]
506 width = 0
507 color = "#377222"
508 [shortcuts]
509 # shortcuts are specified as [modifier+][modifier+]...key
510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511 # and 'mod4' (windows-key)
512 # xev might be helpful to find names for keys
513 # close notification
514 close = ctrl+space
515 # close all notifications
516 close_all = ctrl+shift+space
517 # redisplay last message(s)
518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519 history = ctrl+shift+h
520 # context menu
521 context = ctrl+shift+period
522 [urgency_low]
523 # IMPORTANT: colors have to be defined in quotation marks.
524 # Otherwise the '#' and following would be interpreted as a comment.
525 background = "#1d2a30"
526 foreground = "#71c2af"
527 timeout = 3
528 [urgency_normal]
529 background = "#1d2a30"
530 foreground = "#71c2af"
531 timeout = 0
532 [urgency_critical]
533 background = "#1d2a30"
534 foreground = "#ff9982"
535 timeout = 0
536
537 # Every section that isn't one of the above is interpreted as a rules
538 # to override settings for certain messages.
539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
541 # and 'format'.
542 # Shell-like globbing will get expanded.
543 #
544 # SCRIPTING
545 # you can specify a script that gets run when the rule matches by setting
546 # the 'script' option.
547 # The script will be called as follows:
548 # script appname summary body icon urgency
549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
550 #
551 # NOTE: if you don't want a notification to be displayed, set the format to ""
552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
553 # fitting options for rules.
554 #[espeak]
555 # summary = "*"
556 # script = dunst_espeak.sh
557 #[script-test]
558 # summary = "*script*"
559 # script = dunst_test.sh
560 #[ignore]
561 ## This notification will not be displayed
562 # summary = "foobar"
563 # format = ""
564 #[signed_on]
565 # appname = Pidgin
566 # summary = "*signed on*"
567 # urgency = low
568 #
569 #[signed_off]
570 # appname = Pidgin
571 # summary = *signed off*
572 # urgency = low
573 #
574 #[says]
575 # appname = Pidgin
576 # summary = *says*
577 # urgency = critical
578 #
579 #[twitter]
580 # appname = Pidgin
581 # summary = *twitter.com*
582 # urgency = normal
583 #
584 [xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587 #+end_src
588
589 ** Fontconfig
590 :PROPERTIES:
591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
592 :END:
593
594 #+begin_src xml
595 <?xml version="1.0"?>
596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597 <fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
628 <accept>
629 <family>Liberation Sans</family>
630 </accept>
631 </alias>
632 </fontconfig>
633 #+end_src
634
635 ** Git
636
637 *** gitconfig
638 :PROPERTIES:
639 :header-args+: :tangle ~/.gitconfig
640 :END:
641
642 **** user
643 #+begin_src conf
644 [user]
645 name = Amin Bandali
646 email = amin@aminb.org
647 # signingkey = 4E05246AB0BF7FFB
648 #+end_src
649
650 **** signing
651 #+begin_src conf
652 # [commit]
653 # gpgsign = true
654 # [format]
655 # signoff = true
656 #+end_src
657
658 **** core
659 #+begin_src conf
660 [core]
661 autocrlf = input # CRLF -> LF on commit
662 editor = emacsclient -t
663 excludesfile = ~/.gitignore_global
664 pager = "less"
665 #+end_src
666
667 **** gpg
668 #+begin_src conf
669 [gpg]
670 program = gpg2
671 #+end_src
672
673 **** alias
674 #+begin_src conf
675 [alias]
676 git = !exec git # handle nested git calls, e.g. git git status
677 aliases = config --get-regexp '^alias\\.'
678 a = add
679 s = status
680 sl = status --long
681 c = checkout
682 cb = checkout -b
683 b = branch
684 r = rebase
685 p = pull
686 pr = pull --rebase
687 ps = push
688 psf = push --force
689 #+end_src
690
691 **** color
692 #+begin_src conf
693 [color]
694 ui = auto
695 [color "status"]
696 added = green bold
697 changed = red bold
698 untracked = red bold
699 [color "branch"]
700 current = green bold
701 remote = magenta bold
702 [color "diff"]
703 new = green bold
704 old = red bold
705 #+end_src
706
707 **** status
708 #+begin_src conf
709 [status]
710 # showUntrackedFiles = all
711 short=true
712 branch=true
713 #+end_src
714
715 **** github
716 #+begin_src conf
717 [github]
718 user = aminb
719 #+end_src
720
721 *** gitignore
722 :PROPERTIES:
723 :header-args+: :tangle ~/.gitignore_global
724 :END:
725
726 #+begin_src conf
727 *.orig
728 *.py[co]
729 *.sublime-workspace
730 *~
731 .DS_Store
732 *.elc
733 *-autoloads.el
734 #+end_src
735
736 ** Latexmk
737 :PROPERTIES:
738 :header-args+: :tangle ~/.latexmkrc
739 :END:
740
741 #+begin_src conf
742 $pdf_previewer = "start zathura %O %S";
743 $clean_ext = "aux out";
744
745 # $pdf_update_method = 4;
746 # $pdf_update_command = "zathura %O %S";
747
748 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
749 # by Ctrl+click in the PDF.
750 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
751 # editor.
752 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
753 #+end_src
754
755 ** libinput
756
757 Improve XPS 15 9560's touchpad experience.
758
759 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
760 Section "InputClass"
761 Identifier "libinput touchpad catchall"
762 Driver "libinput"
763 MatchIsTouchpad "on"
764 Option "ClickMethod" "clickfinger"
765 Option "NaturalScrolling" "true"
766 Option "Tapping" "on"
767 Option "TappingButtonMap" "lrm"
768 EndSection
769 #+end_src
770
771 ** getmail
772
773 *** getmailrc
774 :PROPERTIES:
775 :header-args+: :tangle ~/.getmail/getmailrc
776 :END:
777
778 #+begin_src conf
779 [retriever]
780 type = SimplePOP3SSLRetriever
781 server = fencepost.gnu.org
782 username = aminb
783 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
784 port = 995
785 use_apop = True
786
787 [destination]
788 type = Maildir
789 path = ~/mail/gnu/Inbox/
790
791 [options]
792 delete = True
793 #+end_src
794
795 *** getmail.service
796 :PROPERTIES:
797 :header-args+: :tangle ~/.config/systemd/user/getmail.service
798 :END:
799
800 #+begin_src conf :tangle no
801 [Unit]
802 Description=getmail service
803
804 [Service]
805 Type=oneshot
806 ExecStart=/usr/bin/getmail
807 StandardOutput=syslog
808 StandardError=syslog
809 #+end_src
810
811 *** getmail.timer
812 :PROPERTIES:
813 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
814 :END:
815
816 #+begin_src conf :tangle no
817 [Unit]
818 Description=getmail timer
819
820 [Timer]
821 OnCalendar=*:0/30
822 Persistent=true
823 Unit=getmail.service
824
825 [Install]
826 WantedBy=timers.target
827 #+end_src
828
829 ** GnuPG
830 :PROPERTIES:
831 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
832 :END:
833
834 #+begin_src conf
835 default-cache-ttl 43200
836 max-cache-ttl 43200
837
838 default-cache-ttl-ssh 10800
839 max-cache-ttl-ssh 10800
840
841 # pinentry-program /usr/bin/pinentry-qt
842 #+end_src
843
844 ** GTK
845
846 *** gtk-2.0
847 :PROPERTIES:
848 :header-args+: :tangle ~/.gtkrc-2.0
849 :END:
850
851 #+begin_src conf
852 gtk-theme-name="Greybird"
853 gtk-icon-theme-name="Paper"
854 gtk-font-name="Ubuntu 10"
855 gtk-menu-images=0
856 # gtk-key-theme-name = "Emacs"
857 #+end_src
858
859 *** gtk-3.0
860 :PROPERTIES:
861 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
862 :END:
863
864 #+begin_src conf :tangle no
865 [Settings]
866 gtk-icon-theme-name = Paper
867 # gtk-theme-name = Adwaita
868
869 gtk-theme-name = Greybird
870 # gtk-theme-name = Arc-Darker
871 # gtk-theme-name = Numix-ArchBlue
872
873 gtk-font-name = Ubuntu 10
874 # gtk-key-theme-name = Emacs
875 #+end_src
876
877 ** isync
878
879 *** mbsyncrc
880 :PROPERTIES:
881 :header-args+: :tangle ~/.mbsyncrc
882 :END:
883
884 #+begin_src conf
885 # Global defaults
886 CopyArrivalDate yes
887
888 ######
889 IMAPAccount amin
890 Host nix.aminb.org
891 User amin@aminb.org
892 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
893 SSLType IMAPS
894
895 IMAPStore amin-remote
896 Account amin
897
898 MaildirStore amin-local
899 Path ~/mail/amin/
900 Inbox ~/mail/amin/Inbox
901 SubFolders Verbatim
902
903 Channel amin
904 Master :amin-remote:
905 Slave :amin-local:
906 Patterns * !dovecot*
907 Create Both
908 SyncState *
909
910 ######
911 IMAPAccount uwaterloo
912 Host connect.uwaterloo.ca
913 User abandali
914 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
915 SSLType IMAPS
916
917 IMAPStore uwaterloo-remote
918 Account uwaterloo
919
920 MaildirStore uwaterloo-local
921 Path ~/mail/uwaterloo/
922 Inbox ~/mail/uwaterloo/Inbox
923 SubFolders Verbatim
924
925 Channel uwaterloo
926 Master :uwaterloo-remote:
927 Slave :uwaterloo-local:
928 Patterns * !dovecot*
929 Create Both
930 SyncState *
931 #+end_src
932
933 *** mbsync.service
934 :PROPERTIES:
935 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
936 :END:
937
938 #+begin_src conf :tangle no
939 [Unit]
940 Description=mbsync service
941
942 [Service]
943 Type=oneshot
944 ExecStart=/usr/bin/mbsync -Va
945 StandardOutput=syslog
946 StandardError=syslog
947 #+end_src
948
949 *** mbsync.timer
950 :PROPERTIES:
951 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
952 :END:
953
954 #+begin_src conf :tangle no
955 [Unit]
956 Description=mbsync timer
957
958 [Timer]
959 OnCalendar=*:0/15
960 Persistent=true
961 Unit=mbsync.service
962
963 [Install]
964 WantedBy=timers.target
965 #+end_src
966
967 ** mpd
968 :PROPERTIES:
969 :header-args+: :tangle ~/.config/mpd/mpd.conf
970 :END:
971
972 #+begin_src conf
973 # An example configuration file for MPD.
974 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
975
976
977 # Files and directories #######################################################
978 #
979 # This setting controls the top directory which MPD will search to discover the
980 # available audio files and add them to the daemon's online database. This
981 # setting defaults to the XDG directory, otherwise the music directory will be
982 # be disabled and audio files will only be accepted over ipc socket (using
983 # file:// protocol) or streaming files over an accepted protocol.
984 #
985 music_directory "~/usr/music"
986 #
987 # This setting sets the MPD internal playlist directory. The purpose of this
988 # directory is storage for playlists created by MPD. The server will use
989 # playlist files not created by the server but only if they are in the MPD
990 # format. This setting defaults to playlist saving being disabled.
991 #
992 playlist_directory "~/.mpd/playlists"
993 #
994 # This setting sets the location of the MPD database. This file is used to
995 # load the database at server start up and store the database while the
996 # server is not up. This setting defaults to disabled which will allow
997 # MPD to accept files over ipc socket (using file:// protocol) or streaming
998 # files over an accepted protocol.
999 #
1000 db_file "~/.mpd/database"
1001 #
1002 # These settings are the locations for the daemon log files for the daemon.
1003 # These logs are great for troubleshooting, depending on your log_level
1004 # settings.
1005 #
1006 # The special value "syslog" makes MPD use the local syslog daemon. This
1007 # setting defaults to logging to syslog, otherwise logging is disabled.
1008 #
1009 log_file "~/.mpd/log"
1010 #
1011 # This setting sets the location of the file which stores the process ID
1012 # for use of mpd --kill and some init scripts. This setting is disabled by
1013 # default and the pid file will not be stored.
1014 #
1015 pid_file "~/.mpd/pid"
1016 #
1017 # This setting sets the location of the file which contains information about
1018 # most variables to get MPD back into the same general shape it was in before
1019 # it was brought down. This setting is disabled by default and the server
1020 # state will be reset on server start up.
1021 #
1022 state_file "~/.mpd/state"
1023 #
1024 # The location of the sticker database. This is a database which
1025 # manages dynamic information attached to songs.
1026 #
1027 sticker_file "~/.mpd/sticker.sql"
1028 #
1029 ###############################################################################
1030
1031
1032 # General music daemon options ################################################
1033 #
1034 # This setting specifies the user that MPD will run as. MPD should never run as
1035 # root and you may use this setting to make MPD change its user ID after
1036 # initialization. This setting is disabled by default and MPD is run as the
1037 # current user.
1038 #
1039 #user "nobody"
1040 #
1041 # This setting specifies the group that MPD will run as. If not specified
1042 # primary group of user specified with "user" setting will be used (if set).
1043 # This is useful if MPD needs to be a member of group such as "audio" to
1044 # have permission to use sound card.
1045 #
1046 #group "nogroup"
1047 #
1048 # This setting sets the address for the daemon to listen on. Careful attention
1049 # should be paid if this is assigned to anything other then the default, any.
1050 # This setting can deny access to control of the daemon. Not effective if
1051 # systemd socket activiation is in use.
1052 #
1053 # For network
1054 #bind_to_address "any"
1055 #
1056 # And for Unix Socket
1057 #bind_to_address "~/.mpd/socket"
1058 #
1059 # This setting is the TCP port that is desired for the daemon to get assigned
1060 # to.
1061 #
1062 #port "6600"
1063 #
1064 # This setting controls the type of information which is logged. Available
1065 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1066 # argument is recommended for troubleshooting, though can quickly stretch
1067 # available resources on limited hardware storage.
1068 #
1069 #log_level "default"
1070 #
1071 # If you have a problem with your MP3s ending abruptly it is recommended that
1072 # you set this argument to "no" to attempt to fix the problem. If this solves
1073 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1074 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1075 # point gapless MP3 playback can be enabled.
1076 #
1077 #gapless_mp3_playback "yes"
1078 #
1079 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1080 # of starting playback after startup.
1081 #
1082 #restore_paused "no"
1083 #
1084 # This setting enables MPD to create playlists in a format usable by other
1085 # music players.
1086 #
1087 #save_absolute_paths_in_playlists "no"
1088 #
1089 # This setting defines a list of tag types that will be extracted during the
1090 # audio file discovery process. The complete list of possible values can be
1091 # found in the user manual.
1092 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1093 #
1094 # This setting enables automatic update of MPD's database when files in
1095 # music_directory are changed.
1096 #
1097 #auto_update "yes"
1098 #
1099 # Limit the depth of the directories being watched, 0 means only watch
1100 # the music directory itself. There is no limit by default.
1101 #
1102 #auto_update_depth "3"
1103 #
1104 ###############################################################################
1105
1106
1107 # Symbolic link behavior ######################################################
1108 #
1109 # If this setting is set to "yes", MPD will discover audio files by following
1110 # symbolic links outside of the configured music_directory.
1111 #
1112 #follow_outside_symlinks "yes"
1113 #
1114 # If this setting is set to "yes", MPD will discover audio files by following
1115 # symbolic links inside of the configured music_directory.
1116 #
1117 #follow_inside_symlinks "yes"
1118 #
1119 ###############################################################################
1120
1121
1122 # Zeroconf / Avahi Service Discovery ##########################################
1123 #
1124 # If this setting is set to "yes", service information will be published with
1125 # Zeroconf / Avahi.
1126 #
1127 #zeroconf_enabled "yes"
1128 #
1129 # The argument to this setting will be the Zeroconf / Avahi unique name for
1130 # this MPD server on the network.
1131 #
1132 #zeroconf_name "Music Player"
1133 #
1134 ###############################################################################
1135
1136
1137 # Permissions #################################################################
1138 #
1139 # If this setting is set, MPD will require password authorization. The password
1140 # setting can be specified multiple times for different password profiles.
1141 #
1142 #password "password@read,add,control,admin"
1143 #
1144 # This setting specifies the permissions a user has who has not yet logged in.
1145 #
1146 #default_permissions "read,add,control,admin"
1147 #
1148 ###############################################################################
1149
1150
1151 # Database #######################################################################
1152 #
1153
1154 #database {
1155 # plugin "proxy"
1156 # host "other.mpd.host"
1157 # port "6600"
1158 #}
1159
1160 # Input #######################################################################
1161 #
1162
1163 input {
1164 plugin "curl"
1165 # proxy "proxy.isp.com:8080"
1166 # proxy_user "user"
1167 # proxy_password "password"
1168 }
1169
1170 #
1171 ###############################################################################
1172
1173 # Audio Output ################################################################
1174 #
1175
1176 audio_output {
1177 type "pulse"
1178 name "pulse audio"
1179 }
1180
1181 audio_output {
1182 type "fifo"
1183 name "my_fifo"
1184 path "/tmp/mpd.fifo"
1185 format "44100:16:2"
1186 }
1187
1188 # MPD supports various audio output types, as well as playing through multiple
1189 # audio outputs at the same time, through multiple audio_output settings
1190 # blocks. Setting this block is optional, though the server will only attempt
1191 # autodetection for one sound card.
1192 #
1193 # An example of an ALSA output:
1194 #
1195 #audio_output {
1196 # type "alsa"
1197 # name "My ALSA Device"
1198 ## device "hw:0,0" # optional
1199 ## mixer_type "hardware" # optional
1200 ## mixer_device "default" # optional
1201 ## mixer_control "PCM" # optional
1202 ## mixer_index "0" # optional
1203 #}
1204 #
1205 # An example of an OSS output:
1206 #
1207 #audio_output {
1208 # type "oss"
1209 # name "My OSS Device"
1210 ## device "/dev/dsp" # optional
1211 ## mixer_type "hardware" # optional
1212 ## mixer_device "/dev/mixer" # optional
1213 ## mixer_control "PCM" # optional
1214 #}
1215 #
1216 # An example of a shout output (for streaming to Icecast):
1217 #
1218 #audio_output {
1219 # type "shout"
1220 # encoder "vorbis" # optional
1221 # name "My Shout Stream"
1222 # host "localhost"
1223 # port "8000"
1224 # mount "/mpd.ogg"
1225 # password "hackme"
1226 # quality "5.0"
1227 # bitrate "128"
1228 # format "44100:16:1"
1229 ## protocol "icecast2" # optional
1230 ## user "source" # optional
1231 ## description "My Stream Description" # optional
1232 ## url "http://example.com" # optional
1233 ## genre "jazz" # optional
1234 ## public "no" # optional
1235 ## timeout "2" # optional
1236 ## mixer_type "software" # optional
1237 #}
1238 #
1239 # An example of a recorder output:
1240 #
1241 #audio_output {
1242 # type "recorder"
1243 # name "My recorder"
1244 # encoder "vorbis" # optional, vorbis or lame
1245 # path "/var/lib/mpd/recorder/mpd.ogg"
1246 ## quality "5.0" # do not define if bitrate is defined
1247 # bitrate "128" # do not define if quality is defined
1248 # format "44100:16:1"
1249 #}
1250 #
1251 # An example of a httpd output (built-in HTTP streaming server):
1252 #
1253 #audio_output {
1254 # type "httpd"
1255 # name "My HTTP Stream"
1256 # encoder "vorbis" # optional, vorbis or lame
1257 # port "8000"
1258 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1259 ## quality "5.0" # do not define if bitrate is defined
1260 # bitrate "128" # do not define if quality is defined
1261 # format "44100:16:1"
1262 # max_clients "0" # optional 0=no limit
1263 #}
1264 #
1265 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1266 #
1267 #audio_output {
1268 # type "pulse"
1269 # name "My Pulse Output"
1270 ## server "remote_server" # optional
1271 ## sink "remote_server_sink" # optional
1272 #}
1273 #
1274 # An example of a winmm output (Windows multimedia API).
1275 #
1276 #audio_output {
1277 # type "winmm"
1278 # name "My WinMM output"
1279 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1280 # or
1281 ## device "0" # optional
1282 ## mixer_type "hardware" # optional
1283 #}
1284 #
1285 # An example of an openal output.
1286 #
1287 #audio_output {
1288 # type "openal"
1289 # name "My OpenAL output"
1290 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1291 #}
1292 #
1293 # An example of an sndio output.
1294 #
1295 #audio_output {
1296 # type "sndio"
1297 # name "sndio output"
1298 # mixer_type "software"
1299 #}
1300 #
1301 # An example of an OS X output:
1302 #
1303 #audio_output {
1304 # type "osx"
1305 # name "My OS X Device"
1306 ## device "Built-in Output" # optional
1307 ## channel_map "-1,-1,0,1" # optional
1308 #}
1309 #
1310 ## Example "pipe" output:
1311 #
1312 #audio_output {
1313 # type "pipe"
1314 # name "my pipe"
1315 # command "aplay -f cd 2>/dev/null"
1316 ## Or if you're want to use AudioCompress
1317 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1318 ## Or to send raw PCM stream through PCM:
1319 # command "nc example.org 8765"
1320 # format "44100:16:2"
1321 #}
1322 #
1323 ## An example of a null output (for no audio output):
1324 #
1325 #audio_output {
1326 # type "null"
1327 # name "My Null Output"
1328 # mixer_type "none" # optional
1329 #}
1330 #
1331 ###############################################################################
1332
1333
1334 # Normalization automatic volume adjustments ##################################
1335 #
1336 # This setting specifies the type of ReplayGain to use. This setting can have
1337 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1338 # chooses between "track" and "album" depending on the current state of
1339 # random playback. If random playback is enabled then "track" mode is used.
1340 # See <http://www.replaygain.org> for more details about ReplayGain.
1341 # This setting is off by default.
1342 #
1343 #replaygain "album"
1344 #
1345 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1346 # default this setting is disabled.
1347 #
1348 #replaygain_preamp "0"
1349 #
1350 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1351 # By default this setting is disabled.
1352 #
1353 #replaygain_missing_preamp "0"
1354 #
1355 # This setting enables or disables ReplayGain limiting.
1356 # MPD calculates actual amplification based on the ReplayGain tags
1357 # and replaygain_preamp / replaygain_missing_preamp setting.
1358 # If replaygain_limit is enabled MPD will never amplify audio signal
1359 # above its original level. If replaygain_limit is disabled such amplification
1360 # might occur. By default this setting is enabled.
1361 #
1362 #replaygain_limit "yes"
1363 #
1364 # This setting enables on-the-fly normalization volume adjustment. This will
1365 # result in the volume of all playing audio to be adjusted so the output has
1366 # equal "loudness". This setting is disabled by default.
1367 #
1368 #volume_normalization "no"
1369 #
1370 ###############################################################################
1371
1372 # Character Encoding ##########################################################
1373 #
1374 # If file or directory names do not display correctly for your locale then you
1375 # may need to modify this setting.
1376 #
1377 #filesystem_charset "UTF-8"
1378 #
1379 ###############################################################################
1380 #+end_src
1381
1382 ** msmtp
1383 :PROPERTIES:
1384 :header-args+: :tangle ~/.msmtprc
1385 :END:
1386
1387 #+begin_src conf
1388 # Set default values for all following accounts.
1389 defaults
1390 port 587
1391 tls on
1392 auth on
1393 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1394 logfile ~/.msmtp.log
1395
1396 # aminb
1397 account aminb
1398 host nix.aminb.org
1399 tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1400 tls_starttls on
1401 from amin@aminb.org
1402 user amin@aminb.org
1403 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1404
1405 # gnu
1406 account gnu
1407 host fencepost.gnu.org
1408 tls_fingerprint 95:B7:AC:05:37:97:F8:BE:0B:C0:71:4A:8A:4C:0B:A7:59:FD:2F:B8:93:C8:CC:B6:FF:82:83:90:CF:03:91:93
1409 tls_starttls on
1410 from aminb@gnu.org
1411 user aminb
1412 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1413
1414 # uwaterloo
1415 account uwaterloo
1416 host connect.uwaterloo.ca
1417 tls_starttls on
1418 from abandali@uwaterloo.ca
1419 user abandali
1420 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1421 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1422
1423 # uwaterloo (friendly address)
1424 account uwaterloo-friendly : uwaterloo
1425 from amin.bandali@uwaterloo.ca
1426
1427 # Set a default account
1428 account default : aminb
1429 #+end_src
1430
1431 ** ncmpcpp
1432
1433 *** config
1434 :PROPERTIES:
1435 :header-args+: :tangle ~/.ncmpcpp/config
1436 :END:
1437
1438 #+begin_src conf :tangle no
1439 ##############################################################
1440 ## This is the example configuration file. Copy it to ##
1441 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1442 ## and set up your preferences. ##
1443 ##############################################################
1444 #
1445 ##### directories ######
1446 ##
1447 ## Directory for storing ncmpcpp related files.
1448 ## Changing it is useful if you want to store
1449 ## everything somewhere else and provide command
1450 ## line setting for alternative location to config
1451 ## file which defines that while launching ncmpcpp.
1452 ##
1453 #
1454 ncmpcpp_directory = ~/.ncmpcpp
1455 #
1456 ##
1457 ## Directory for storing downloaded lyrics. It
1458 ## defaults to ~/.lyrics since other MPD clients
1459 ## (eg. ncmpc) also use that location.
1460 ##
1461 #
1462 #lyrics_directory = ~/.lyrics
1463 #
1464 ##### connection settings #####
1465 #
1466 #mpd_host = localhost
1467 #
1468 #mpd_port = 6600
1469 #
1470 #mpd_connection_timeout = 5
1471 #
1472 ## Needed for tag editor and file operations to work.
1473 ##
1474 mpd_music_dir = ~/usr/music
1475 #
1476 #mpd_crossfade_time = 5
1477 #
1478 ##### music visualizer #####
1479 ##
1480 ## Note: In order to make music visualizer work you'll
1481 ## need to use mpd fifo output, whose format parameter
1482 ## has to be set to 44100:16:1 for mono visualization
1483 ## or 44100:16:2 for stereo visualization. Example
1484 ## configuration (it has to be put into mpd.conf):
1485 ##
1486 ## audio_output {
1487 ## type "fifo"
1488 ## name "Visualizer feed"
1489 ## path "/tmp/mpd.fifo"
1490 ## format "44100:16:2"
1491 ## }
1492 ##
1493 #
1494 visualizer_fifo_path = /tmp/mpd.fifo
1495 #
1496 ##
1497 ## Note: Below parameter is needed for ncmpcpp
1498 ## to determine which output provides data for
1499 ## visualizer and thus allow syncing between
1500 ## visualization and sound as currently there
1501 ## are some problems with it.
1502 ##
1503 #
1504 visualizer_output_name = my fifo
1505 #
1506 ##
1507 ## If you set format to 44100:16:2, make it 'yes'.
1508 ##
1509 visualizer_in_stereo = yes
1510 #
1511 ##
1512 ## Multiply received samples by given value. Very
1513 ## useful for proper visualization of quiet music.
1514 ##
1515 #visualizer_sample_multiplier = 1
1516 #
1517 ##
1518 ## Note: Below parameter defines how often ncmpcpp
1519 ## has to "synchronize" visualizer and audio outputs.
1520 ## 30 seconds is optimal value, but if you experience
1521 ## synchronization problems, set it to lower value.
1522 ## Keep in mind that sane values start with >=10.
1523 ##
1524 #
1525 visualizer_sync_interval = 30
1526 #
1527 ##
1528 ## Note: To enable spectrum frequency visualization
1529 ## you need to compile ncmpcpp with fftw3 support.
1530 ##
1531 #
1532 ## Available values: spectrum, wave, wave_filled, ellipse.
1533 ##
1534 visualizer_type = spectrum
1535 #
1536 #visualizer_look = ●▮
1537 visualizer_look = "●•"
1538 #
1539 #visualizer_color = blue, cyan, green, yellow, magenta, red
1540 #
1541 ## Alternative subset of 256 colors for terminals that support it.
1542 ##
1543 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1544 #
1545 ##### system encoding #####
1546 ##
1547 ## ncmpcpp should detect your charset encoding
1548 ## but if it failed to do so, you can specify
1549 ## charset encoding you are using here.
1550 ##
1551 ## Note: You can see whether your ncmpcpp build
1552 ## supports charset detection by checking output
1553 ## of `ncmpcpp --version`.
1554 ##
1555 ## Note: Since MPD uses UTF-8 by default, setting
1556 ## this option makes sense only if your encoding
1557 ## is different.
1558 ##
1559 #
1560 #system_encoding = ""
1561 #
1562 ##### delays #####
1563 #
1564 ## Time of inactivity (in seconds) after playlist
1565 ## highlighting will be disabled (0 = always on).
1566 ##
1567 #playlist_disable_highlight_delay = 5
1568 #
1569 ## Defines how long messages are supposed to be visible.
1570 ##
1571 #message_delay_time = 5
1572 #
1573 ##### song format #####
1574 ##
1575 ## For a song format you can use:
1576 ##
1577 ## %l - length
1578 ## %f - filename
1579 ## %D - directory
1580 ## %a - artist
1581 ## %A - album artist
1582 ## %t - title
1583 ## %b - album
1584 ## %y - date
1585 ## %n - track number (01/12 -> 01)
1586 ## %N - full track info (01/12 -> 01/12)
1587 ## %g - genre
1588 ## %c - composer
1589 ## %p - performer
1590 ## %d - disc
1591 ## %C - comment
1592 ## %P - priority
1593 ## $R - begin right alignment
1594 ##
1595 ## If you want to make sure that a part of the format is displayed
1596 ## only when certain tags are present, you can archieve it by
1597 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1598 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1599 ## It is also possible to define a list of alternatives by providing
1600 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1601 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1602 ## present.
1603 ##
1604 ## Note: If you want to set limit on maximal length of a tag, just
1605 ## put the appropriate number between % and character that defines
1606 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1607 ##
1608 ## In addition, formats support markers used for text attributes.
1609 ## They are followed by character '$'. After that you can put:
1610 ##
1611 ## - 0 - default window color (discards all other colors)
1612 ## - 1 - black
1613 ## - 2 - red
1614 ## - 3 - green
1615 ## - 4 - yellow
1616 ## - 5 - blue
1617 ## - 6 - magenta
1618 ## - 7 - cyan
1619 ## - 8 - white
1620 ## - 9 - end of current color
1621 ## - b - bold text
1622 ## - u - underline text
1623 ## - r - reverse colors
1624 ## - a - use alternative character set
1625 ##
1626 ## If you don't want to use a non-color attribute anymore, just put it
1627 ## again, but this time insert character '/' between '$' and attribute
1628 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1629 ## or filename with reversed colors.
1630 ##
1631 ## If you want to use 256 colors and/or background colors in formats
1632 ## (the naming scheme is described below in section about color
1633 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1634 ## the artist tag to one of the non-standard colors and make it have
1635 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1636 ## that for standard colors this is interchangable with attributes
1637 ## listed above.
1638 ##
1639 ## Note: colors can be nested.
1640 ##
1641 #
1642 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1643 #
1644 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1645 #
1646 #song_library_format = {%n - }{%t}|{%f}
1647 #
1648 #
1649 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1650 #
1651 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1652 #
1653 #now_playing_prefix = $b
1654 #
1655 #now_playing_suffix = $/b
1656 #
1657 #browser_playlist_prefix = "$2playlist$9 "
1658 #
1659 #selected_item_prefix = $6
1660 #
1661 #selected_item_suffix = $9
1662 #
1663 #modified_item_prefix = $3> $9
1664 #
1665 ##
1666 ## Note: attributes are not supported for the following variables.
1667 ##
1668 #song_window_title_format = {%a - }{%t}|{%f}
1669 ##
1670 ## Note: Below variables are used for sorting songs in browser.
1671 ## The sort mode determines how songs are sorted, and can be used
1672 ## in combination with a sort format to specify a custom sorting format.
1673 ## Available values for browser_sort_mode are "name", "mtime", "format"
1674 ## and "noop".
1675 ##
1676 #
1677 #browser_sort_mode = name
1678 #
1679 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1680 #
1681 ##### columns settings #####
1682 ##
1683 ## syntax of song columns list format is "column column etc."
1684 ##
1685 ## - syntax for each column is:
1686 ##
1687 ## (width of the column)[color of the column]{displayed tag}
1688 ##
1689 ## Note: Width is by default in %, if you want a column to
1690 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1691 ## will be the column that take 10% of screen (so the real width
1692 ## will depend on actual screen size), whereas (10f)[white]{a}
1693 ## will take 10 terminal cells, no matter how wide the screen is.
1694 ##
1695 ## - color is optional (if you want the default one,
1696 ## leave the field empty).
1697 ##
1698 ## Note: You can give a column additional attributes by putting appropriate
1699 ## character after displayed tag character. Available attributes are:
1700 ##
1701 ## - r - column will be right aligned
1702 ## - E - if tag is empty, empty tag marker won't be displayed
1703 ##
1704 ## You can also:
1705 ##
1706 ## - give a column custom name by putting it after attributes,
1707 ## separated with character ':', e.g. {lr:Length} gives you
1708 ## right aligned column of lengths named "Length".
1709 ##
1710 ## - define sequence of tags, that have to be displayed in case
1711 ## predecessor is empty in a way similar to the one in classic
1712 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1713 ## creates column named "Owner" that tries to display artist
1714 ## tag and then composer and performer if previous ones are
1715 ## not available.
1716 ##
1717 #
1718 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1719 #
1720 ##### various settings #####
1721 #
1722 ##
1723 ## Note: Custom command that will be executed each
1724 ## time song changes. Useful for notifications etc.
1725 ##
1726 #execute_on_song_change = ""
1727 #
1728 #playlist_show_mpd_host = no
1729 #
1730 #playlist_show_remaining_time = no
1731 #
1732 #playlist_shorten_total_times = no
1733 #
1734 #playlist_separate_albums = no
1735 #
1736 ##
1737 ## Note: Possible display modes: classic, columns.
1738 ##
1739 #playlist_display_mode = columns
1740 #
1741 #browser_display_mode = classic
1742 #
1743 #search_engine_display_mode = classic
1744 #
1745 #playlist_editor_display_mode = classic
1746 #
1747 #discard_colors_if_item_is_selected = yes
1748 #
1749 #incremental_seeking = yes
1750 #
1751 #seek_time = 1
1752 #
1753 #volume_change_step = 2
1754 #
1755 #autocenter_mode = no
1756 #
1757 #centered_cursor = no
1758 #
1759 ##
1760 ## Note: You can specify third character which will
1761 ## be used to build 'empty' part of progressbar.
1762 ##
1763 #progressbar_look = =>
1764 progressbar_look = "─╼╶"
1765 #progressbar_look = "─⊙╶"
1766 #
1767 #progressbar_boldness = yes
1768 #
1769 ## Available values: database, playlist.
1770 ##
1771 #default_place_to_search_in = database
1772 #
1773 ## Available values: classic, alternative.
1774 ##
1775 #user_interface = classic
1776 #
1777 #data_fetching_delay = yes
1778 #
1779 ## Available values: artist, album_artist, date, genre, composer, performer.
1780 ##
1781 #media_library_primary_tag = artist
1782 #
1783 ## Available values: wrapped, normal.
1784 ##
1785 #default_find_mode = wrapped
1786 #
1787 #default_tag_editor_pattern = %n - %t
1788 #
1789 #header_visibility = yes
1790 #
1791 #statusbar_visibility = yes
1792 #
1793 #titles_visibility = yes
1794 #
1795 #header_text_scrolling = yes
1796 #
1797 #cyclic_scrolling = no
1798 #
1799 #lines_scrolled = 2
1800 #
1801 #follow_now_playing_lyrics = no
1802 #
1803 #fetch_lyrics_for_current_song_in_background = no
1804 #
1805 #store_lyrics_in_song_dir = no
1806 #
1807 #generate_win32_compatible_filenames = yes
1808 #
1809 #allow_for_physical_item_deletion = no
1810 #
1811 ##
1812 ## Note: If you set this variable, ncmpcpp will try to
1813 ## get info from last.fm in language you set and if it
1814 ## fails, it will fall back to english. Otherwise it will
1815 ## use english the first time.
1816 ##
1817 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1818 ##
1819 #lastfm_preferred_language = en
1820 #
1821 #show_hidden_files_in_local_browser = no
1822 #
1823 ##
1824 ## How shall screen switcher work?
1825 ##
1826 ## - "previous" - switch between the current and previous screen.
1827 ## - "screen1,...,screenN" - switch between given sequence of screens.
1828 ##
1829 ## Screens available for use: help, playlist, browser, search_engine,
1830 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1831 ##
1832 #screen_switcher_mode = playlist, browser
1833 #
1834 ##
1835 ## Note: You can define startup screen
1836 ## by choosing screen from the list above.
1837 ##
1838 #startup_screen = playlist
1839 #
1840 ##
1841 ## Note: You can define startup slave screen
1842 ## by choosing screen from the list above or
1843 ## an empty value for no slave screen.
1844 ##
1845 #startup_slave_screen = ""
1846 #
1847 #startup_slave_screen_focus = no
1848 #
1849 ##
1850 ## Default width of locked screen (in %).
1851 ## Acceptable values are from 20 to 80.
1852 ##
1853 #
1854 #locked_screen_width_part = 50
1855 #
1856 #ask_for_locked_screen_width_part = yes
1857 #
1858 #jump_to_now_playing_song_at_start = yes
1859 #
1860 #ask_before_clearing_playlists = yes
1861 #
1862 #clock_display_seconds = no
1863 #
1864 #display_volume_level = yes
1865 #
1866 #display_bitrate = no
1867 #
1868 #display_remaining_time = no
1869 #
1870 ## Available values: none, basic, extended, perl.
1871 ##
1872 #regular_expressions = perl
1873 #
1874 ##
1875 ## Note: If below is enabled, ncmpcpp will ignore leading
1876 ## "The" word while sorting items in browser, tags in
1877 ## media library, etc.
1878 ##
1879 #ignore_leading_the = no
1880 #
1881 #block_search_constraints_change_if_items_found = yes
1882 #
1883 #mouse_support = yes
1884 #
1885 #mouse_list_scroll_whole_page = yes
1886 #
1887 #empty_tag_marker = <empty>
1888 #
1889 #tags_separator = " | "
1890 #
1891 #tag_editor_extended_numeration = no
1892 #
1893 #media_library_sort_by_mtime = no
1894 #
1895 #enable_window_title = yes
1896 #
1897 ##
1898 ## Note: You can choose default search mode for search
1899 ## engine. Available modes are:
1900 ##
1901 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1902 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1903 ## but if your mpd is on a remote machine, downloading big database
1904 ## to process it can take a while
1905 ## - 3 - match only exact values (this mode uses mpd function for searching
1906 ## in database and local one for searching in current playlist)
1907 ##
1908 #
1909 #search_engine_default_search_mode = 1
1910 #
1911 #external_editor = nano
1912 #
1913 ## Note: set to yes if external editor is a console application.
1914 ##
1915 #use_console_editor = yes
1916 #
1917 ##### colors definitions #####
1918 ##
1919 ## It is possible to set a background color by setting a color
1920 ## value "<foreground>_<background>", e.g. red_black will set
1921 ## foregound color to red and background color to black.
1922 ##
1923 ## In addition, for terminals that support 256 colors it
1924 ## is possible to set one of them by using a number in range
1925 ## [1, 256] instead of color name, e.g. numerical value
1926 ## corresponding to red_black is 2_1. To find out if the
1927 ## terminal supports 256 colors, run ncmpcpp and check out
1928 ## the bottom of the help screen for list of available colors
1929 ## and their numerical values.
1930 ##
1931 ## Note: due to technical limitations of ncurses, if 256 colors
1932 ## are used, it is possible to either use only the colors with
1933 ## default background color, or all pairs from 1_1 up to 254_127,
1934 ## depending on the ncurses version used.
1935 ##
1936 #
1937 #colors_enabled = yes
1938 #
1939 #empty_tag_color = cyan
1940 #
1941 #header_window_color = default
1942 #
1943 #volume_color = default
1944 #
1945 #state_line_color = default
1946 #
1947 #state_flags_color = default
1948 #
1949 #main_window_color = yellow
1950 #
1951 #color1 = white
1952 #
1953 #color2 = green
1954 #
1955 #main_window_highlight_color = yellow
1956 #
1957 #progressbar_color = black
1958 #
1959 #progressbar_elapsed_color = green
1960 #
1961 #statusbar_color = default
1962 #
1963 #alternative_ui_separator_color = black
1964 #
1965 #active_column_color = red
1966 #
1967 #window_border_color = green
1968 #
1969 #active_window_border = red
1970 #
1971 #+end_src
1972
1973 *** bindings
1974 :PROPERTIES:
1975 :header-args+: :tangle ~/.ncmpcpp/bindings
1976 :END:
1977
1978 #+begin_src conf :tangle no
1979 def_key "j"
1980 scroll_down
1981 def_key "k"
1982 scroll_up
1983
1984 def_key "ctrl-u"
1985 page_up
1986 def_key "ctrl-d"
1987 page_down
1988
1989 def_key "h"
1990 previous_column
1991 def_key "l"
1992 next_column
1993
1994 def_key "."
1995 show_lyrics
1996
1997 def_key "n"
1998 next_found_item
1999 def_key "N"
2000 previous_found_item
2001
2002 def_key "J"
2003 move_sort_order_down
2004 def_key "K"
2005 move_sort_order_up
2006 #+end_src
2007
2008 ** notmuch
2009
2010 *** notmuch-config
2011 :PROPERTIES:
2012 :header-args+: :tangle ~/.notmuch-config
2013 :END:
2014
2015 #+begin_src conf
2016 # .notmuch-config - Configuration file for the notmuch mail system
2017 #
2018 # For more information about notmuch, see https://notmuchmail.org
2019
2020 # Database configuration
2021 #
2022 # The only value supported here is 'path' which should be the top-level
2023 # directory where your mail currently exists and to where mail will be
2024 # delivered in the future. Files should be individual email messages.
2025 # Notmuch will store its database within a sub-directory of the path
2026 # configured here named ".notmuch".
2027 #
2028 [database]
2029 path=/home/amin/mail
2030
2031 # User configuration
2032 #
2033 # Here is where you can let notmuch know how you would like to be
2034 # addressed. Valid settings are
2035 #
2036 # name Your full name.
2037 # primary_email Your primary email address.
2038 # other_email A list (separated by ';') of other email addresses
2039 # at which you receive email.
2040 #
2041 # Notmuch will use the various email addresses configured here when
2042 # formatting replies. It will avoid including your own addresses in the
2043 # recipient list of replies, and will set the From address based on the
2044 # address to which the original email was addressed.
2045 #
2046 [user]
2047 name=Amin Bandali
2048 primary_email=amin@aminb.org
2049 other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
2050
2051 # Configuration for "notmuch new"
2052 #
2053 # The following options are supported here:
2054 #
2055 # tags A list (separated by ';') of the tags that will be
2056 # added to all messages incorporated by "notmuch new".
2057 #
2058 # ignore A list (separated by ';') of file and directory names
2059 # that will not be searched for messages by "notmuch new".
2060 #
2061 # NOTE: *Every* file/directory that goes by one of those
2062 # names will be ignored, independent of its depth/location
2063 # in the mail store.
2064 #
2065 [new]
2066 tags=new;
2067 #tags=unread;inbox;
2068 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2069
2070 # Search configuration
2071 #
2072 # The following option is supported here:
2073 #
2074 # exclude_tags
2075 # A ;-separated list of tags that will be excluded from
2076 # search results by default. Using an excluded tag in a
2077 # query will override that exclusion.
2078 #
2079 [search]
2080 exclude_tags=deleted;spam;
2081
2082 # Maildir compatibility configuration
2083 #
2084 # The following option is supported here:
2085 #
2086 # synchronize_flags Valid values are true and false.
2087 #
2088 # If true, then the following maildir flags (in message filenames)
2089 # will be synchronized with the corresponding notmuch tags:
2090 #
2091 # Flag Tag
2092 # ---- -------
2093 # D draft
2094 # F flagged
2095 # P passed
2096 # R replied
2097 # S unread (added when 'S' flag is not present)
2098 #
2099 # The "notmuch new" command will notice flag changes in filenames
2100 # and update tags, while the "notmuch tag" and "notmuch restore"
2101 # commands will notice tag changes and update flags in filenames
2102 #
2103 [maildir]
2104 synchronize_flags=true
2105
2106 # Cryptography related configuration
2107 #
2108 # The following option is supported here:
2109 #
2110 # gpg_path
2111 # binary name or full path to invoke gpg.
2112 #
2113 [crypto]
2114 gpg_path=gpg
2115 #+end_src
2116
2117 *** pre-new hook
2118 :PROPERTIES:
2119 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2120 :END:
2121
2122 #+begin_src sh
2123 touch /tmp/gnusieve.log
2124 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2125 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2126 #+end_src
2127
2128 *** post-new hook
2129 :PROPERTIES:
2130 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2131 :END:
2132
2133 #+begin_src sh
2134 # apply sent tag to messages sent by me
2135 notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca
2136
2137 # initial tagging
2138 notmuch tag +inbox +unread -new -- tag:new
2139
2140 # apply tags to lists
2141 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2142 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2143 notmuch tag -inbox +lists/emacs-devel -- folder:gnu/l/emacs-devel
2144 notmuch tag -inbox +lists/guix-devel -- folder:gnu/l/guix-devel
2145 notmuch tag -inbox +lists/guile-devel -- folder:gnu/l/guile-devel
2146 notmuch tag -inbox +lists/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2147 notmuch tag -inbox +lists/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2148 notmuch tag -inbox +lists/www-commits -- folder:gnu/l/www-commits
2149 notmuch tag -inbox +lists/www-discuss -- folder:gnu/l/www-discuss
2150 notmuch tag -inbox +lists/fencepost-users -- folder:gnu/l/fencepost-users
2151 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2152 notmuch tag -inbox +lists/deepspec -- folder:gnu/l/deepspec
2153 notmuch tag -inbox +lists/haskell-cafe -- folder:gnu/l/haskell-cafe
2154 notmuch tag -inbox +lists/notmuch -- folder:gnu/l/notmuch
2155 #+end_src
2156
2157 *** notmuch.service
2158 :PROPERTIES:
2159 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2160 :END:
2161
2162 #+begin_src conf :tangle no
2163 [Unit]
2164 Description=notmuch service
2165
2166 [Service]
2167 Type=oneshot
2168 ExecStart=/usr/bin/notmuch new
2169 StandardOutput=syslog
2170 StandardError=syslog
2171 #+end_src
2172
2173 *** notmuch.timer
2174 :PROPERTIES:
2175 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2176 :END:
2177
2178 #+begin_src conf :tangle no
2179 [Unit]
2180 Description=notmuch timer
2181
2182 [Timer]
2183 OnCalendar=*:0/5
2184 Persistent=true
2185 Unit=notmuch.service
2186
2187 [Install]
2188 WantedBy=timers.target
2189 #+end_src
2190
2191 ** offlineimap
2192
2193 *** offlineimaprc
2194 :PROPERTIES:
2195 :header-args+: :tangle ~/.offlineimaprc
2196 :END:
2197
2198 #+begin_src conf :tangle no
2199 [general]
2200 pythonfile = ~/.offlineimap.py
2201 accounts = Gmail, aminb
2202 maxsyncaccounts = 3
2203
2204 [Account Gmail]
2205 localrepository = GmailL
2206 remoterepository = GmailR
2207
2208 [Account aminb]
2209 localrepository = aminbL
2210 remoterepository = aminbR
2211
2212 [Repository GmailL]
2213 type = Maildir
2214 localfolders = ~/Maildir/Gmail
2215
2216 [Repository GmailR]
2217 type = IMAP
2218 remotehost = imap.gmail.com
2219 remoteusereval = mailuser("gmail")
2220 remotepasseval = mailpasswd("gmail")
2221 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2222 ssl = yes
2223 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2224 maxconnections = 1
2225 realdelete = no
2226
2227 [Repository aminbL]
2228 type = Maildir
2229 localfolders = ~/Maildir/aminb
2230
2231 [Repository aminbR]
2232 type = IMAP
2233 remotehost = mail.aminb.org
2234 remoteusereval = mailuser("aminb")
2235 remotepasseval = mailpasswd("aminb")
2236 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2237 ssl = yes
2238 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2239 maxconnections = 1
2240 realdelete = no
2241 #+end_src
2242
2243 *** offlineimap.py
2244 :PROPERTIES:
2245 :header-args+: :tangle ~/.offlineimap.py
2246 :END:
2247
2248 #+begin_src python :tangle no
2249 import os
2250 import subprocess
2251
2252 def mailpasswd(acct):
2253 acct = os.path.basename(acct)
2254 path = "/home/amin/.passwd/%s.gpg" % acct
2255 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2256 try:
2257 return subprocess.check_output(args).strip()
2258 except subprocess.CalledProcessError:
2259 return ""
2260
2261 def mailuser(acct):
2262 acct = os.path.basename(acct)
2263 path = "/home/amin/.passwd/%s" % acct
2264 args = ["cat", path]
2265 try:
2266 return subprocess.check_output(args).strip()
2267 except subprocess.CalledProcessError:
2268 return ""
2269
2270 def prime_gpg_agent():
2271 ret = False
2272 i = 1
2273 while not ret:
2274 ret = (mailpasswd("prime") == "prime")
2275 if i > 2:
2276 from offlineimap.ui import getglobalui
2277 sys.stderr.write("Error reading in passwords. Terminating.\n")
2278 getglobalui().terminate()
2279 i += 1
2280 return ret
2281
2282 prime_gpg_agent()
2283 #+end_src
2284
2285 ** pigeonhole
2286 *** gnu.sieve
2287 :PROPERTIES:
2288 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2289 :END:
2290
2291 #+begin_src conf
2292 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2293
2294 if anyof (
2295 address :is "from" "webmasters@gnu.org",
2296 address :is "from" "webmasters-comment@gnu.org") {
2297 fileinto :create "webmasters";
2298 stop;
2299 }
2300
2301 include :personal "lists";
2302 #+end_src
2303
2304 *** lists.sieve
2305 :PROPERTIES:
2306 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2307 :END:
2308
2309 #+begin_src conf
2310 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2311 "include" ];
2312
2313 if anyof (
2314 header :contains "list-id" "<emacs-devel.gnu.org>",
2315 header :contains "list-id" "<guix-devel.gnu.org>",
2316 header :contains "list-id" "<guile-devel.gnu.org>",
2317 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2318 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2319 header :contains "list-id" "<www-commits.gnu.org>",
2320 header :contains "list-id" "<www-discuss.gnu.org>",
2321 header :contains "list-id" "<fencepost-users.gnu.org>",
2322 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2323 header :contains "list-id" "<haskell-cafe.haskell.org>",
2324 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2325 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2326 set :lower "listname" "${1}";
2327 fileinto :create "l/${listname}";
2328 }
2329 }
2330 #+end_src
2331
2332 ** polybar
2333
2334 *** config
2335 :PROPERTIES:
2336 :header-args+: :tangle ~/.config/polybar/config
2337 :END:
2338
2339 #+begin_src conf :tangle no
2340 ;=====================================================
2341 ;
2342 ; To learn more about how to configure Polybar
2343 ; go to https://github.com/jaagr/polybar
2344 ;
2345 ; The README contains alot of information
2346 ;
2347 ;=====================================================
2348
2349 [colors]
2350 ;background = ${xrdb:color0:#222}
2351 background = #222
2352 background-alt = #444
2353 ;foreground = ${xrdb:color7:#222}
2354 foreground = #eee
2355 foreground-alt = #888
2356 primary = #ffb52a
2357 secondary = #e60053
2358 alert = #bd2c40
2359
2360 [bar/main]
2361 ;monitor = ${env:MONITOR:HDMI-1}
2362 width = 100%
2363 height = 27
2364 ;offset-x = 1%
2365 ;offset-y = 1%
2366 radius = 3.0
2367 fixed-center = true
2368
2369 background = ${colors.background}
2370 foreground = ${colors.foreground}
2371
2372 line-size = 3
2373 line-color = #f00
2374
2375 border-size = 4
2376 border-color = #00000000
2377
2378 padding-left = 0
2379 padding-right = 2
2380
2381 module-margin-left = 2
2382 module-margin-right = 2
2383
2384 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2385 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2386 font-2 = Wuncon Siji:pixelsize=10;1
2387 font-3 = FontAwesome:pixelsize=10;1
2388
2389 modules-left = bspwm xwindow
2390 modules-center =
2391 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2392
2393 tray-position = right
2394 tray-padding = 1
2395 ;tray-transparent = true
2396 ;tray-background = #0063ff
2397 tray-maxsize = 18
2398
2399 wm-restack = bspwm
2400
2401 ;override-redirect = true
2402
2403 scroll-up = bspwm-desknext
2404 scroll-down = bspwm-deskprev
2405
2406 [module/xwindow]
2407 type = internal/xwindow
2408 label = %title:0:50:...%
2409
2410 [module/xkeyboard]
2411 type = internal/xkeyboard
2412 blacklist-0 = num lock
2413
2414 format-prefix = " "
2415 format-prefix-foreground = ${colors.foreground-alt}
2416 format-prefix-underline = ${colors.secondary}
2417
2418 label-layout = %layout%
2419 label-layout-underline = ${colors.secondary}
2420
2421 label-indicator-padding = 2
2422 label-indicator-margin = 1
2423 label-indicator-background = ${colors.secondary}
2424 label-indicator-underline = ${colors.secondary}
2425
2426 [module/filesystem]
2427 type = internal/fs
2428 interval = 25
2429
2430 mount-0 = /
2431
2432 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2433 label-unmounted = %mountpoint% not mounted
2434 label-unmounted-foreground = ${colors.foreground-alt}
2435
2436 [module/bspwm]
2437 type = internal/bspwm
2438
2439 label-focused = %index%
2440 label-focused-background = ${colors.background-alt}
2441 label-focused-underline= ${colors.primary}
2442 label-focused-padding = 2
2443
2444 label-occupied = %index%
2445 label-occupied-padding = 2
2446
2447 label-urgent = %index%!
2448 label-urgent-background = ${colors.alert}
2449 label-urgent-padding = 2
2450
2451 label-empty = %index%
2452 label-empty-foreground = ${colors.foreground-alt}
2453 label-empty-padding = 2
2454
2455 [module/i3]
2456 type = internal/i3
2457 format = <label-state> <label-mode>
2458 index-sort = true
2459 wrapping-scroll = false
2460
2461 ; Only show workspaces on the same output as the bar
2462 ;pin-workspaces = true
2463
2464 label-mode-padding = 2
2465 label-mode-foreground = #000
2466 label-mode-background = ${colors.primary}
2467
2468 ; focused = Active workspace on focused monitor
2469 label-focused = %index%
2470 label-focused-background = ${module/bspwm.label-focused-background}
2471 label-focused-underline = ${module/bspwm.label-focused-underline}
2472 label-focused-padding = ${module/bspwm.label-focused-padding}
2473
2474 ; unfocused = Inactive workspace on any monitor
2475 label-unfocused = %index%
2476 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2477
2478 ; visible = Active workspace on unfocused monitor
2479 label-visible = %index%
2480 label-visible-background = ${self.label-focused-background}
2481 label-visible-underline = ${self.label-focused-underline}
2482 label-visible-padding = ${self.label-focused-padding}
2483
2484 ; urgent = Workspace with urgency hint set
2485 label-urgent = %index%
2486 label-urgent-background = ${module/bspwm.label-urgent-background}
2487 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2488
2489 [module/mpd]
2490 type = internal/mpd
2491 format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2492
2493 icon-prev = 
2494 icon-stop = 
2495 icon-play = 
2496 icon-pause = 
2497 icon-next = 
2498
2499 label-song-maxlen = 25
2500 label-song-ellipsis = true
2501
2502 [module/xbacklight]
2503 type = internal/xbacklight
2504
2505 format = <label> <bar>
2506 label = BL
2507
2508 bar-width = 10
2509 bar-indicator = |
2510 bar-indicator-foreground = #ff
2511 bar-indicator-font = 2
2512 bar-fill = ─
2513 bar-fill-font = 2
2514 bar-fill-foreground = #9f78e1
2515 bar-empty = ─
2516 bar-empty-font = 2
2517 bar-empty-foreground = ${colors.foreground-alt}
2518
2519 [module/backlight-acpi]
2520 inherit = module/xbacklight
2521 type = internal/backlight
2522 ;card = intel_backlight
2523 card = mba6x_backlight
2524
2525 [module/cpu]
2526 type = internal/cpu
2527 interval = 2
2528 format-prefix = " "
2529 format-prefix-foreground = ${colors.foreground-alt}
2530 format-underline = #f90000
2531 label = %percentage%%
2532
2533 [module/memory]
2534 type = internal/memory
2535 interval = 2
2536 format-prefix = " "
2537 format-prefix-foreground = ${colors.foreground-alt}
2538 format-underline = #4bffdc
2539 label = %percentage_used%%
2540
2541 [module/wlan]
2542 type = internal/network
2543 interface =
2544 interval = 3.0
2545
2546 format-connected = <ramp-signal> <label-connected>
2547 format-connected-underline = #9f78e1
2548 label-connected = %essid%
2549
2550 format-disconnected =
2551 ;format-disconnected = <label-disconnected>
2552 ;format-disconnected-underline = ${self.format-connected-underline}
2553 ;label-disconnected = %ifname% disconnected
2554 ;label-disconnected-foreground = ${colors.foreground-alt}
2555
2556 ramp-signal-0 = 
2557 ramp-signal-1 = 
2558 ramp-signal-2 = 
2559 ramp-signal-3 = 
2560 ramp-signal-4 = 
2561 ramp-signal-foreground = ${colors.foreground-alt}
2562
2563 [module/eth]
2564 type = internal/network
2565 interface =
2566 interval = 3.0
2567
2568 format-connected-underline = #55aa55
2569 format-connected-prefix = " "
2570 format-connected-prefix-foreground = ${colors.foreground-alt}
2571 label-connected = %local_ip%
2572
2573 format-disconnected =
2574 ;format-disconnected = <label-disconnected>
2575 ;format-disconnected-underline = ${self.format-connected-underline}
2576 ;label-disconnected = %ifname% disconnected
2577 ;label-disconnected-foreground = ${colors.foreground-alt}
2578
2579 [module/date]
2580 type = internal/date
2581 interval = 5
2582
2583 date =
2584 date-alt = " %Y-%m-%d"
2585
2586 time = %H:%M
2587 time-alt = %H:%M:%S
2588
2589 format-prefix = 
2590 format-prefix-foreground = ${colors.foreground-alt}
2591 format-underline = #0a6cf5
2592
2593 label = %date% %time%
2594
2595 [module/volume]
2596 type = internal/volume
2597
2598 format-volume = <label-volume> <bar-volume>
2599 label-volume = vol
2600 label-volume-foreground = ${root.foreground}
2601
2602 format-muted-prefix = " "
2603 format-muted-foreground = ${colors.foreground-alt}
2604 label-muted = mute
2605
2606 bar-volume-width = 10
2607 bar-volume-foreground-0 = #55aa55
2608 bar-volume-foreground-1 = #55aa55
2609 bar-volume-foreground-2 = #55aa55
2610 bar-volume-foreground-3 = #55aa55
2611 bar-volume-foreground-4 = #55aa55
2612 bar-volume-foreground-5 = #f5a70a
2613 bar-volume-foreground-6 = #ff5555
2614 bar-volume-gradient = false
2615 bar-volume-indicator = |
2616 bar-volume-indicator-font = 2
2617 bar-volume-fill = ─
2618 bar-volume-fill-font = 2
2619 bar-volume-empty = ─
2620 bar-volume-empty-font = 2
2621 bar-volume-empty-foreground = ${colors.foreground-alt}
2622
2623 [module/battery]
2624 type = internal/battery
2625 battery = BAT0
2626 adapter = ADP1
2627 full-at = 64
2628
2629 format-charging = <animation-charging> <label-charging>
2630 format-charging-underline = #ffb52a
2631
2632 format-discharging = <ramp-capacity> <label-discharging>
2633 format-discharging-underline = ${self.format-charging-underline}
2634
2635 format-full-prefix = " "
2636 format-full-prefix-foreground = ${colors.foreground-alt}
2637 format-full-underline = ${self.format-charging-underline}
2638
2639 ramp-capacity-0 = 
2640 ramp-capacity-1 = 
2641 ramp-capacity-2 = 
2642 ramp-capacity-foreground = ${colors.foreground-alt}
2643
2644 animation-charging-0 = 
2645 animation-charging-1 = 
2646 animation-charging-2 = 
2647 animation-charging-foreground = ${colors.foreground-alt}
2648 animation-charging-framerate = 750
2649
2650 [module/temperature]
2651 type = internal/temperature
2652 thermal-zone = 1
2653 warn-temperature = 66
2654
2655 format = <ramp> <label>
2656 format-underline = #f50a4d
2657 format-warn = <ramp> <label-warn>
2658 format-warn-underline = ${self.format-underline}
2659
2660 label = %temperature%
2661 label-warn = %temperature%
2662 label-warn-foreground = ${colors.secondary}
2663
2664 ramp-0 = 
2665 ramp-1 = 
2666 ramp-2 = 
2667 ramp-foreground = ${colors.foreground-alt}
2668
2669 [module/powermenu]
2670 type = custom/menu
2671
2672 format-spacing = 1
2673
2674 label-open = 
2675 label-open-foreground = ${colors.secondary}
2676 label-close =  cancel
2677 label-close-foreground = ${colors.secondary}
2678 label-separator = |
2679 label-separator-foreground = ${colors.foreground-alt}
2680
2681 menu-0-0 = reboot
2682 menu-0-0-exec = menu-open-1
2683 menu-0-1 = power off
2684 menu-0-1-exec = menu-open-2
2685
2686 menu-1-0 = cancel
2687 menu-1-0-exec = menu-open-0
2688 menu-1-1 = reboot
2689 menu-1-1-exec = sudo reboot
2690
2691 menu-2-0 = power off
2692 menu-2-0-exec = sudo poweroff
2693 menu-2-1 = cancel
2694 menu-2-1-exec = menu-open-0
2695
2696 [module/mail]
2697 type = custom/script
2698 interval = 60
2699 format = <label>
2700 format-prefix = " "
2701 format-prefix-foreground = ${colors.foreground-alt}
2702 format-underline = #0a6cf5
2703 exec = notmuch count tag:unread
2704
2705 [settings]
2706 screenchange-reload = true
2707 ;compositing-background = xor
2708 ;compositing-background = screen
2709 ;compositing-foreground = source
2710 ;compositing-border = over
2711
2712 [global/wm]
2713 margin-top = 0
2714 margin-bottom = 0
2715
2716 ; vim:ft=dosini
2717 #+end_src
2718
2719 *** polybar-launch
2720 :PROPERTIES:
2721 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2722 :END:
2723
2724 #+begin_src sh :tangle no
2725 # Terminate already running bar instances
2726 killall -q polybar
2727
2728 # Wait until the processes have been shut down
2729 while pgrep -x polybar >/dev/null; do sleep 1; done
2730
2731 # Launch main bar
2732 polybar main &
2733
2734 echo "Bars launched..."
2735 #+end_src
2736
2737 ** PowerTOP
2738 :PROPERTIES:
2739 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2740 :END:
2741
2742 #+begin_src conf
2743 [Unit]
2744 Description=Powertop tunings
2745
2746 [Service]
2747 ExecStart=/usr/bin/powertop --auto-tune
2748 RemainAfterExit=true
2749
2750 [Install]
2751 WantedBy=multi-user.target
2752 #+end_src
2753
2754 ** ranger
2755
2756 *** rc.conf
2757 :PROPERTIES:
2758 :header-args+: :tangle ~/.config/ranger/rc.conf
2759 :END:
2760
2761 #+begin_src conf :tangle no
2762 # ===================================================================
2763 # This file contains the default startup commands for ranger.
2764 # To change them, it is recommended to create the file
2765 # ~/.config/ranger/rc.conf and add your custom commands there.
2766 #
2767 # If you copy this whole file there, you may want to set the environment
2768 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2769 #
2770 # The purpose of this file is mainly to define keybindings and settings.
2771 # For running more complex python code, please create a plugin in "plugins/" or
2772 # a command in "commands.py".
2773 #
2774 # Each line is a command that will be run before the user interface
2775 # is initialized. As a result, you can not use commands which rely
2776 # on the UI such as :delete or :mark.
2777 # ===================================================================
2778
2779 # ===================================================================
2780 # == Options
2781 # ===================================================================
2782
2783 # How many columns are there, and what are their relative widths?
2784 set column_ratios 1,3,4
2785
2786 # Which files should be hidden? (regular expression)
2787 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2788
2789 # Show hidden files? You can toggle this by typing 'zh'
2790 set show_hidden false
2791
2792 # Ask for a confirmation when running the "delete" command?
2793 # Valid values are "always" (default), "never", "multiple"
2794 # With "multiple", ranger will ask only if you delete multiple files at once.
2795 set confirm_on_delete multiple
2796
2797 # Which script is used to generate file previews?
2798 # ranger ships with scope.sh, a script that calls external programs (see
2799 # README for dependencies) to preview images, archives, etc.
2800 set preview_script ~/.config/ranger/scope.sh
2801
2802 # Use the external preview script or display simple plain text previews?
2803 set use_preview_script true
2804
2805 # Open all images in this directory when running certain image viewers
2806 # like feh or sxiv? You can still open selected files by marking them.
2807 set open_all_images true
2808
2809 # Be aware of version control systems and display information.
2810 set vcs_aware false
2811
2812 # State of the three backends git, hg, bzr. The possible states are
2813 # disabled, local (only show local info), enabled (show local and remote
2814 # information).
2815 set vcs_backend_git enabled
2816 set vcs_backend_hg disabled
2817 set vcs_backend_bzr disabled
2818
2819 # Preview images in full color with the external command "w3mimgpreview"?
2820 # This requires the console web browser "w3m" and a supported terminal.
2821 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2822 set preview_images true
2823
2824 # Use a unicode "..." character to mark cut-off filenames?
2825 set unicode_ellipsis false
2826
2827 # Show dotfiles in the bookmark preview box?
2828 set show_hidden_bookmarks true
2829
2830 # Which colorscheme to use? These colorschemes are available by default:
2831 # default, jungle, snow
2832 set colorscheme default
2833
2834 # Preview files on the rightmost column?
2835 # And collapse (shrink) the last column if there is nothing to preview?
2836 set preview_files true
2837 set preview_directories true
2838 set collapse_preview true
2839
2840 # Save the console history on exit?
2841 set save_console_history true
2842
2843 # Draw the status bar on top of the browser window (default: bottom)
2844 set status_bar_on_top false
2845
2846 # Draw a progress bar in the status bar which displays the average state of all
2847 # currently running tasks which support progress bars?
2848 set draw_progress_bar_in_status_bar true
2849
2850 # Draw borders around columns?
2851 set draw_borders true
2852
2853 # Display the directory name in tabs?
2854 set dirname_in_tabs false
2855
2856 # Enable the mouse support?
2857 set mouse_enabled true
2858
2859 # Display the file size in the main column or status bar?
2860 set display_size_in_main_column true
2861 set display_size_in_status_bar true
2862
2863 # Display files tags in all columns or only in main column?
2864 set display_tags_in_all_columns true
2865
2866 # Set a title for the window?
2867 set update_title false
2868
2869 # Set the title to "ranger" in the tmux program?
2870 set update_tmux_title false
2871
2872 # Shorten the title if it gets long? The number defines how many
2873 # directories are displayed at once, 0 turns off this feature.
2874 set shorten_title 3
2875
2876 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2877 set tilde_in_titlebar false
2878
2879 # How many directory-changes or console-commands should be kept in history?
2880 set max_history_size 20
2881 set max_console_history_size 50
2882
2883 # Try to keep so much space between the top/bottom border when scrolling:
2884 set scroll_offset 8
2885
2886 # Flush the input after each key hit? (Noticable when ranger lags)
2887 set flushinput true
2888
2889 # Padding on the right when there's no preview?
2890 # This allows you to click into the space to run the file.
2891 set padding_right true
2892
2893 # Save bookmarks (used with mX and `X) instantly?
2894 # This helps to synchronize bookmarks between multiple ranger
2895 # instances but leads to *slight* performance loss.
2896 # When false, bookmarks are saved when ranger is exited.
2897 set autosave_bookmarks true
2898
2899 # You can display the "real" cumulative size of directories by using the
2900 # command :get_cumulative_size or typing "dc". The size is expensive to
2901 # calculate and will not be updated automatically. You can choose
2902 # to update it automatically though by turning on this option:
2903 set autoupdate_cumulative_size false
2904
2905 # Turning this on makes sense for screen readers:
2906 set show_cursor false
2907
2908 # One of: size, basename, mtime, type
2909 set sort natural
2910
2911 # Additional sorting options
2912 set sort_reverse false
2913 set sort_case_insensitive true
2914 set sort_directories_first true
2915
2916 # Enable this if key combinations with the Alt Key don't work for you.
2917 # (Especially on xterm)
2918 set xterm_alt_key false
2919
2920 # ===================================================================
2921 # == Local Options
2922 # ===================================================================
2923 # You can set local options that only affect a single directory.
2924
2925 # Examples:
2926 # setlocal path=~/downloads sort mtime
2927
2928 # ===================================================================
2929 # == Command Aliases in the Console
2930 # ===================================================================
2931
2932 alias e edit
2933 alias q quit
2934 alias q! quitall
2935 alias qall quitall
2936 alias setl setlocal
2937
2938 alias filter scout -prt
2939 alias find scout -aet
2940 alias mark scout -mr
2941 alias unmark scout -Mr
2942 alias search scout -rs
2943 alias search_inc scout -rts
2944 alias travel scout -aefiklst
2945
2946 # ===================================================================
2947 # == Define keys for the browser
2948 # ===================================================================
2949
2950 # Basic
2951 map Q quit!
2952 map q quit
2953 copymap q ZZ ZQ
2954
2955 map R reload_cwd
2956 map <C-r> reset
2957 map <C-l> redraw_window
2958 map <C-c> abort
2959 map <esc> change_mode normal
2960
2961 map i display_file
2962 map ? help
2963 map W display_log
2964 map w taskview_open
2965 map S shell $SHELL
2966
2967 map : console
2968 map ; console
2969 map ! console shell
2970 map @ console -p6 shell %%s
2971 map # console shell -p
2972 map s console shell
2973 map r chain draw_possible_programs; console open_with
2974 map f console find
2975 map cd console cd
2976
2977 # Tagging / Marking
2978 map t tag_toggle
2979 map ut tag_remove
2980 map "<any> tag_toggle tag=%any
2981 map <Space> mark_files toggle=True
2982 map v mark_files all=True toggle=True
2983 map uv mark_files all=True val=False
2984 map V toggle_visual_mode
2985 map uV toggle_visual_mode reverse=True
2986
2987 # For the nostalgics: Midnight Commander bindings
2988 map <F1> help
2989 map <F3> display_file
2990 map <F4> edit
2991 map <F5> copy
2992 map <F6> cut
2993 map <F7> console mkdir
2994 map <F8> console delete
2995 map <F10> exit
2996
2997 # In case you work on a keyboard with dvorak layout
2998 map <UP> move up=1
2999 map <DOWN> move down=1
3000 map <LEFT> move left=1
3001 map <RIGHT> move right=1
3002 map <HOME> move to=0
3003 map <END> move to=-1
3004 map <PAGEDOWN> move down=1 pages=True
3005 map <PAGEUP> move up=1 pages=True
3006 map <CR> move right=1
3007 map <DELETE> console delete
3008 map <INSERT> console touch
3009
3010 # VIM-like
3011 copymap <UP> k
3012 copymap <DOWN> j
3013 copymap <LEFT> h
3014 copymap <RIGHT> l
3015 copymap <HOME> gg
3016 copymap <END> G
3017 copymap <PAGEDOWN> <C-F>
3018 copymap <PAGEUP> <C-B>
3019
3020 map J move down=0.5 pages=True
3021 map K move up=0.5 pages=True
3022 copymap J <C-D>
3023 copymap K <C-U>
3024
3025 # Jumping around
3026 map H history_go -1
3027 map L history_go 1
3028 map ] move_parent 1
3029 map [ move_parent -1
3030 map } traverse
3031
3032 map gh cd ~
3033 map ge cd /etc
3034 map gu cd /usr
3035 map gd cd /dev
3036 map gl cd -r .
3037 map gL cd -r %f
3038 map go cd /opt
3039 map gv cd /var
3040 map gm cd /media
3041 map gM cd /mnt
3042 map gs cd /srv
3043 map gr cd /
3044 map gR eval fm.cd(ranger.RANGERDIR)
3045 map g/ cd /
3046 map g? cd /usr/share/doc/ranger
3047
3048 # External Programs
3049 map E edit
3050 map du shell -p du --max-depth=1 -h --apparent-size
3051 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3052 map yp shell -d echo -n %d/%f | xsel -i
3053 map yd shell -d echo -n %d | xsel -i
3054 map yn shell -d echo -n %f | xsel -i
3055
3056 # Filesystem Operations
3057 map = chmod
3058
3059 map cw console rename
3060 map A eval fm.open_console('rename ' + fm.thisfile.basename)
3061 map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3062
3063 map pp paste
3064 map po paste overwrite=True
3065 map pl paste_symlink relative=False
3066 map pL paste_symlink relative=True
3067 map phl paste_hardlink
3068 map pht paste_hardlinked_subtree
3069
3070 map dd cut
3071 map ud uncut
3072 map da cut mode=add
3073 map dr cut mode=remove
3074
3075 map yy copy
3076 map uy uncut
3077 map ya copy mode=add
3078 map yr copy mode=remove
3079
3080 # Temporary workarounds
3081 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3082 map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3083 map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3084 map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3085 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3086 map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3087 map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3088 map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3089
3090 # Searching
3091 map / console search
3092 map n search_next
3093 map N search_next forward=False
3094 map ct search_next order=tag
3095 map cs search_next order=size
3096 map ci search_next order=mimetype
3097 map cc search_next order=ctime
3098 map cm search_next order=mtime
3099 map ca search_next order=atime
3100
3101 # Tabs
3102 map <C-n> tab_new ~
3103 map <C-w> tab_close
3104 map <TAB> tab_move 1
3105 map <S-TAB> tab_move -1
3106 map <A-Right> tab_move 1
3107 map <A-Left> tab_move -1
3108 map gt tab_move 1
3109 map gT tab_move -1
3110 map gn tab_new ~
3111 map gc tab_close
3112 map uq tab_restore
3113 map <a-1> tab_open 1
3114 map <a-2> tab_open 2
3115 map <a-3> tab_open 3
3116 map <a-4> tab_open 4
3117 map <a-5> tab_open 5
3118 map <a-6> tab_open 6
3119 map <a-7> tab_open 7
3120 map <a-8> tab_open 8
3121 map <a-9> tab_open 9
3122
3123 # Sorting
3124 map or toggle_option sort_reverse
3125 map os chain set sort=size; set sort_reverse=False
3126 map ob chain set sort=basename; set sort_reverse=False
3127 map on chain set sort=natural; set sort_reverse=False
3128 map om chain set sort=mtime; set sort_reverse=False
3129 map oc chain set sort=ctime; set sort_reverse=False
3130 map oa chain set sort=atime; set sort_reverse=False
3131 map ot chain set sort=type; set sort_reverse=False
3132
3133 map oS chain set sort=size; set sort_reverse=True
3134 map oB chain set sort=basename; set sort_reverse=True
3135 map oN chain set sort=natural; set sort_reverse=True
3136 map oM chain set sort=mtime; set sort_reverse=True
3137 map oC chain set sort=ctime; set sort_reverse=True
3138 map oA chain set sort=atime; set sort_reverse=True
3139 map oT chain set sort=type; set sort_reverse=True
3140
3141 map dc get_cumulative_size
3142
3143 # Settings
3144 map zc toggle_option collapse_preview
3145 map zd toggle_option sort_directories_first
3146 map zh toggle_option show_hidden
3147 map <C-h> toggle_option show_hidden
3148 map zi toggle_option flushinput
3149 map zm toggle_option mouse_enabled
3150 map zp toggle_option preview_files
3151 map zP toggle_option preview_directories
3152 map zs toggle_option sort_case_insensitive
3153 map zu toggle_option autoupdate_cumulative_size
3154 map zv toggle_option use_preview_script
3155 map zf console filter
3156
3157 # Bookmarks
3158 map `<any> enter_bookmark %any
3159 map '<any> enter_bookmark %any
3160 map m<any> set_bookmark %any
3161 map um<any> unset_bookmark %any
3162
3163 map m<bg> draw_bookmarks
3164 copymap m<bg> um<bg> `<bg> '<bg>
3165
3166 # Generate all the chmod bindings with some python help:
3167 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3168 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3169 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3170 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3171 eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3172
3173 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3174 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3175 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3176 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3177 eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3178
3179 # ===================================================================
3180 # == Define keys for the console
3181 # ===================================================================
3182 # Note: Unmapped keys are passed directly to the console.
3183
3184 # Basic
3185 cmap <tab> eval fm.ui.console.tab()
3186 cmap <s-tab> eval fm.ui.console.tab(-1)
3187 cmap <ESC> eval fm.ui.console.close()
3188 cmap <CR> eval fm.ui.console.execute()
3189 cmap <C-l> redraw_window
3190
3191 copycmap <ESC> <C-c>
3192 copycmap <CR> <C-j>
3193
3194 # Move around
3195 cmap <up> eval fm.ui.console.history_move(-1)
3196 cmap <down> eval fm.ui.console.history_move(1)
3197 cmap <left> eval fm.ui.console.move(left=1)
3198 cmap <right> eval fm.ui.console.move(right=1)
3199 cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3200 cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3201
3202 # Line Editing
3203 cmap <backspace> eval fm.ui.console.delete(-1)
3204 cmap <delete> eval fm.ui.console.delete(0)
3205 cmap <C-w> eval fm.ui.console.delete_word()
3206 cmap <C-k> eval fm.ui.console.delete_rest(1)
3207 cmap <C-u> eval fm.ui.console.delete_rest(-1)
3208 cmap <C-y> eval fm.ui.console.paste()
3209
3210 # And of course the emacs way
3211 copycmap <up> <C-p>
3212 copycmap <down> <C-n>
3213 copycmap <left> <C-b>
3214 copycmap <right> <C-f>
3215 copycmap <home> <C-a>
3216 copycmap <end> <C-e>
3217 copycmap <delete> <C-d>
3218 copycmap <backspace> <C-h>
3219
3220 # Note: There are multiple ways to express backspaces. <backspace> (code 263)
3221 # and <backspace2> (code 127). To be sure, use both.
3222 copycmap <backspace> <backspace2>
3223
3224 # This special expression allows typing in numerals:
3225 cmap <allow_quantifiers> false
3226
3227 # ===================================================================
3228 # == Pager Keybindings
3229 # ===================================================================
3230
3231 # Movement
3232 pmap <down> pager_move down=1
3233 pmap <up> pager_move up=1
3234 pmap <left> pager_move left=4
3235 pmap <right> pager_move right=4
3236 pmap <home> pager_move to=0
3237 pmap <end> pager_move to=-1
3238 pmap <pagedown> pager_move down=1.0 pages=True
3239 pmap <pageup> pager_move up=1.0 pages=True
3240 pmap <C-d> pager_move down=0.5 pages=True
3241 pmap <C-u> pager_move up=0.5 pages=True
3242
3243 copypmap <UP> k <C-p>
3244 copypmap <DOWN> j <C-n> <CR>
3245 copypmap <LEFT> h
3246 copypmap <RIGHT> l
3247 copypmap <HOME> g
3248 copypmap <END> G
3249 copypmap <C-d> d
3250 copypmap <C-u> u
3251 copypmap <PAGEDOWN> n f <C-F> <Space>
3252 copypmap <PAGEUP> p b <C-B>
3253
3254 # Basic
3255 pmap <ESC> pager_close
3256 copypmap <ESC> q Q i <F3>
3257 pmap E edit_file
3258
3259 # ===================================================================
3260 # == Taskview Keybindings
3261 # ===================================================================
3262
3263 # Movement
3264 tmap <up> taskview_move up=1
3265 tmap <down> taskview_move down=1
3266 tmap <home> taskview_move to=0
3267 tmap <end> taskview_move to=-1
3268 tmap <pagedown> taskview_move down=1.0 pages=True
3269 tmap <pageup> taskview_move up=1.0 pages=True
3270 tmap <C-d> taskview_move down=0.5 pages=True
3271 tmap <C-u> taskview_move up=0.5 pages=True
3272
3273 copytmap <UP> k <C-p>
3274 copytmap <DOWN> j <C-n> <CR>
3275 copytmap <HOME> g
3276 copytmap <END> G
3277 copytmap <C-u> u
3278 copytmap <PAGEDOWN> n f <C-F> <Space>
3279 copytmap <PAGEUP> p b <C-B>
3280
3281 # Changing priority and deleting tasks
3282 tmap J eval -q fm.ui.taskview.task_move(-1)
3283 tmap K eval -q fm.ui.taskview.task_move(0)
3284 tmap dd eval -q fm.ui.taskview.task_remove()
3285 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3286 tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3287 tmap <delete> eval -q fm.ui.taskview.task_remove()
3288
3289 # Basic
3290 tmap <ESC> taskview_close
3291 copytmap <ESC> q Q w <C-c>
3292 #+end_src
3293
3294 *** scope.sh
3295 :PROPERTIES:
3296 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3297 :END:
3298
3299 #+begin_src sh :tangle no
3300 # ranger supports enhanced previews. If the option "use_preview_script"
3301 # is set to True and this file exists, this script will be called and its
3302 # output is displayed in ranger. ANSI color codes are supported.
3303
3304 # NOTES: This script is considered a configuration file. If you upgrade
3305 # ranger, it will be left untouched. (You must update it yourself.)
3306 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3307
3308 # Meanings of exit codes:
3309 # code | meaning | action of ranger
3310 # -----+------------+-------------------------------------------
3311 # 0 | success | success. display stdout as preview
3312 # 1 | no preview | failure. display no preview at all
3313 # 2 | plain text | display the plain content of the file
3314 # 3 | fix width | success. Don't reload when width changes
3315 # 4 | fix height | success. Don't reload when height changes
3316 # 5 | fix both | success. Don't ever reload
3317
3318 # Meaningful aliases for arguments:
3319 path="$1" # Full path of the selected file
3320 width="$2" # Width of the preview pane (number of fitting characters)
3321 height="$3" # Height of the preview pane (number of fitting characters)
3322
3323 maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3324
3325 # Find out something about the file:
3326 mimetype=$(file --mime-type -Lb "$path")
3327 extension=${path##*.}
3328
3329 # Functions:
3330 # runs a command and saves its output into $output. Useful if you need
3331 # the return value AND want to use the output in a pipe
3332 try() { output=$(eval '"$@"'); }
3333
3334 # writes the output of the previouosly used "try" command
3335 dump() { echo "$output"; }
3336
3337 # a common post-processing function used after most commands
3338 trim() { head -n "$maxln"; }
3339
3340 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3341 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3342
3343 case "$extension" in
3344 # Archive extensions:
3345 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3346 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3347 try als "$path" && { dump | trim; exit 0; }
3348 try acat "$path" && { dump | trim; exit 3; }
3349 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3350 exit 1;;
3351 rar)
3352 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3353 # PDF documents:
3354 pdf)
3355 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3356 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3357 # BitTorrent Files
3358 torrent)
3359 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3360 # HTML Pages:
3361 htm|html|xhtml)
3362 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3363 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3364 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3365 ;; # fall back to highlight/cat if the text browsers fail
3366 esac
3367
3368 case "$mimetype" in
3369 # Syntax highlight for text files:
3370 text/* | */xml)
3371 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3372 # Ascii-previews of images:
3373 image/*)
3374 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3375 # Display information about media files:
3376 video/* | audio/*)
3377 exiftool "$path" && exit 5
3378 # Use sed to remove spaces so the output fits into the narrow window
3379 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3380 esac
3381
3382 exit 1
3383 #+end_src
3384
3385 ** redshift
3386 :PROPERTIES:
3387 :header-args+: :tangle ~/.config/redshift.conf :comments none
3388 :END:
3389
3390 #+begin_src conf
3391 ; Global settings for redshift
3392 [redshift]
3393 ; Set the day and night screen temperatures (Neutral is 6500K)
3394 ;temp-day=5700
3395 ;temp-night=3500
3396
3397 ;temp-day=6500
3398 temp-day=6200
3399 ;temp-night=4800
3400 ;temp-night=5000
3401 ;temp-night=4500
3402 temp-night=4000
3403
3404 ; Enable/Disable a smooth transition between day and night
3405 ; 0 will cause a direct change from day to night screen temperature.
3406 ; 1 will gradually increase or decrease the screen temperature.
3407 transition=1
3408
3409 ; Set the screen brightness. Default is 1.0.
3410 ;brightness=0.9
3411 ; It is also possible to use different settings for day and night
3412 ; since version 1.8.
3413 ;brightness-day=0.7
3414 ;brightness-night=0.4
3415 ; Set the screen gamma (for all colors, or each color channel
3416 ; individually)
3417 ;gamma=0.8
3418 ;gamma=1.0
3419 ;gamma=0.8:0.7:0.8
3420 ; This can also be set individually for day and night since
3421 ; version 1.10.
3422 ;gamma-day=0.8:0.7:0.8
3423 ;gamma-night=0.6
3424
3425 ; Set the location-provider: 'geoclue2' or 'manual'
3426 ; type 'redshift -l list' to see possible values.
3427 ; The location provider settings are in a different section.
3428 ;location-provider=manual
3429 location-provider=geoclue2
3430
3431 ; Set the adjustment-method: 'randr', 'vidmode'
3432 ; type 'redshift -m list' to see all possible values.
3433 ; 'randr' is the preferred method, 'vidmode' is an older API.
3434 ; but works in some cases when 'randr' does not.
3435 ; The adjustment method settings are in a different section.
3436 adjustment-method=randr
3437
3438 ; Configuration of the location-provider:
3439 ; type 'redshift -l PROVIDER:help' to see the settings.
3440 ; ex: 'redshift -l manual:help'
3441 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3442 ; are negative numbers.
3443 ;[manual]
3444 ;lat=48.1
3445 ;lon=11.6
3446
3447 ; Configuration of the adjustment-method
3448 ; type 'redshift -m METHOD:help' to see the settings.
3449 ; ex: 'redshift -m randr:help'
3450 ; In this example, randr is configured to adjust screen 1.
3451 ; Note that the numbering starts from 0, so this is actually the
3452 ; second screen. If this option is not specified, Redshift will try
3453 ; to adjust _all_ screens.
3454 ;[randr]
3455 ;screen=1
3456 #+end_src
3457
3458 ** rofi
3459 :PROPERTIES:
3460 :header-args+: :tangle ~/.config/rofi/config
3461 :END:
3462
3463 #+begin_src conf
3464 rofi.font: Ubuntu Mono 13
3465 ! rofi.font: Inconsolata 16
3466 ! rofi.font: Iosevka 13
3467 ! rofi.font: Source Code Pro 11
3468 rofi.modi: run,window
3469 ! rofi.width: 640
3470 rofi.width: 600
3471 !rofi.location: 2
3472 !rofi.yoffset: 200
3473 rofi.monitor: -1
3474 !rofi.lines: 10
3475
3476 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3477 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3478 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3479
3480 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3481 #+end_src
3482
3483 ** rofi-pass
3484 :PROPERTIES:
3485 :header-args+: :tangle ~/.config/rofi-pass/config
3486 :END:
3487
3488 #+begin_src conf
3489 # permanently set alternative root dir
3490 # root=/path/to/root
3491
3492 # rofi command. Make sure to have "$@" as last argument
3493 _rofi () {
3494 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3495 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3496 }
3497
3498 # xdotool needs the keyboard layout to be set using setxkbmap
3499 # You can do this in your autostart scripts (e.g. xinitrc)
3500
3501 # If for some reason, you cannot do this, you can set the command here.
3502 # and set fix_layout to true
3503 fix_layout=false
3504
3505 layout_cmd () {
3506 setxkbmap us
3507 }
3508
3509 # fields to be used
3510 URL_field='url'
3511 USERNAME_field='user'
3512 AUTOTYPE_field='autotype'
3513
3514 # delay to be used for :delay keyword
3515 delay=2
3516
3517 ## Programs to be used
3518 # Editor
3519 EDITOR='gvim -f'
3520
3521 # Browser
3522 BROWSER='chromium'
3523
3524 ## Misc settings
3525
3526 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3527 auto_enter='false'
3528 notify='false'
3529 default_autotype='user :tab pass'
3530
3531 # color of the help messages
3532 # leave empty for autodetection
3533 help_color="#4872FF"
3534
3535 # Clipboard settings
3536 # Possible options: primary, clipboard, both
3537 clip=primary
3538
3539 # Options for generating new password entries
3540 # default_user is also used for password files that have no user field.
3541 default_user=aminb
3542 default_user2=aminban
3543 password_length=30
3544
3545 # Custom Keybindings
3546 #autotype="Alt+1"
3547 autotype="Alt+m"
3548 type_user="Alt+2"
3549 type_pass="Alt+3"
3550 open_url="Alt+4"
3551 copy_name="Alt+u"
3552 copy_url="Alt+l"
3553 copy_pass="Alt+p"
3554 show="Alt+o"
3555 copy_entry="Alt+2"
3556 type_entry="Alt+1"
3557 copy_menu="Alt+c"
3558 action_menu="Alt+a"
3559 type_menu="Alt+t"
3560 help="Alt+h"
3561 switch="Alt+x"
3562 insert_pass="Alt+n"
3563 #+end_src
3564
3565 ** TLP
3566
3567 *** TODO enigma
3568 *** plasma
3569
3570 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3571 # ------------------------------------------------------------------------------
3572 # tlp - Parameters for power saving
3573 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3574
3575 # Hint: some features are disabled by default, remove the leading # to enable
3576 # them.
3577
3578 # Set to 0 to disable, 1 to enable TLP.
3579 TLP_ENABLE=1
3580
3581 # Operation mode when no power supply can be detected: AC, BAT.
3582 # Concerns some desktop and embedded hardware only.
3583 TLP_DEFAULT_MODE=AC
3584
3585 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3586 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3587 TLP_PERSISTENT_DEFAULT=0
3588
3589 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3590 # Non-zero value enables, zero disables laptop mode.
3591 DISK_IDLE_SECS_ON_AC=0
3592 DISK_IDLE_SECS_ON_BAT=2
3593
3594 # Dirty page values (timeouts in secs).
3595 MAX_LOST_WORK_SECS_ON_AC=15
3596 MAX_LOST_WORK_SECS_ON_BAT=60
3597
3598 # Hint: CPU parameters below are disabled by default, remove the leading #
3599 # to enable them, otherwise kernel default values are used.
3600
3601 # Select a CPU frequency scaling governor.
3602 # Intel Core i processor with intel_pstate driver:
3603 # powersave(*), performance.
3604 # Older hardware with acpi-cpufreq driver:
3605 # ondemand(*), powersave, performance, conservative, schedutil.
3606 # (*) is recommended.
3607 # Hint: use tlp-stat -p to show the active driver and available governors.
3608 # Important:
3609 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
3610 # efficient for *almost all* workloads and therefore kernel and most
3611 # distributions have chosen them as defaults. If you still want to change,
3612 # you should know what you're doing! You *must* disable your distribution's
3613 # governor settings or conflicts will occur.
3614 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3615 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3616
3617 # Set the min/max frequency available for the scaling governor.
3618 # Possible values strongly depend on your CPU. For available frequencies see
3619 # the output of tlp-stat -p.
3620 #CPU_SCALING_MIN_FREQ_ON_AC=0
3621 #CPU_SCALING_MAX_FREQ_ON_AC=0
3622 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3623 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3624
3625 # Set energy performance hints (HWP) for Intel P-state governor:
3626 # performance, balance_performance, default, balance_power, power
3627 # Values are given in order of increasing power saving.
3628 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3629 CPU_HWP_ON_AC=balance_performance
3630 CPU_HWP_ON_BAT=balance_power
3631
3632 # Set Intel P-state performance: 0..100 (%).
3633 # Limit the max/min P-state to control the power dissipation of the CPU.
3634 # Values are stated as a percentage of the available performance.
3635 # Requires an Intel Core i processor with intel_pstate driver.
3636 #CPU_MIN_PERF_ON_AC=0
3637 #CPU_MAX_PERF_ON_AC=100
3638 #CPU_MIN_PERF_ON_BAT=0
3639 #CPU_MAX_PERF_ON_BAT=30
3640
3641 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3642 # Requires an Intel Core i processor.
3643 # Important:
3644 # - This may conflict with your distribution's governor settings
3645 # - A value of 1 does *not* activate boosting, it just allows it
3646 #CPU_BOOST_ON_AC=1
3647 #CPU_BOOST_ON_BAT=0
3648
3649 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3650 # 0=disable, 1=enable.
3651 SCHED_POWERSAVE_ON_AC=0
3652 SCHED_POWERSAVE_ON_BAT=1
3653
3654 # Kernel NMI Watchdog:
3655 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
3656 NMI_WATCHDOG=0
3657
3658 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3659 # Frequency voltage pairs are written to:
3660 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3661 # CAUTION: only use this, if you thoroughly understand what you are doing!
3662 #PHC_CONTROLS="F:V F:V F:V F:V"
3663
3664 # Set CPU performance versus energy savings policy:
3665 # performance, balance-performance, default, balance-power, power.
3666 # Values are given in order of increasing power saving.
3667 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3668 ENERGY_PERF_POLICY_ON_AC=performance
3669 ENERGY_PERF_POLICY_ON_BAT=balance-power
3670
3671 # Disk devices; separate multiple devices with spaces (default: sda).
3672 # Devices can be specified by disk ID also (lookup with: tlp diskid).
3673 DISK_DEVICES="sda sdb"
3674
3675 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
3676 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
3677 # Separate values for multiple disks with spaces. Use the special value 'keep'
3678 # to keep the hardware default for the particular disk.
3679 DISK_APM_LEVEL_ON_AC="254 254"
3680 DISK_APM_LEVEL_ON_BAT="128 128"
3681
3682 # Hard disk spin down timeout:
3683 # 0: spin down disabled
3684 # 1..240: timeouts from 5s to 20min (in units of 5s)
3685 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3686 # See 'man hdparm' for details.
3687 # Separate values for multiple disks with spaces. Use the special value 'keep'
3688 # to keep the hardware default for the particular disk.
3689 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3690 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3691
3692 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3693 # Separate values for multiple disks with spaces. Use the special value 'keep'
3694 # to keep the kernel default scheduler for the particular disk.
3695 #DISK_IOSCHED="cfq cfq"
3696
3697 # AHCI link power management (ALPM) for disk devices:
3698 # min_power, med_power_with_dipm(*), medium_power, max_performance.
3699 # (*) Kernel >= 4.15 required, then recommended.
3700 # Multiple values separated with spaces are tried sequentially until success.
3701 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3702 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3703
3704 # Exclude host devices from AHCI link power management.
3705 # Separate multiple hosts with spaces.
3706 #SATA_LINKPWR_BLACKLIST="host1"
3707
3708 # Runtime Power Management for AHCI host and disks devices:
3709 # on=disable, auto=enable.
3710 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3711 #AHCI_RUNTIME_PM_ON_AC=on
3712 #AHCI_RUNTIME_PM_ON_BAT=on
3713
3714 # Seconds of inactivity before disk is suspended.
3715 AHCI_RUNTIME_PM_TIMEOUT=15
3716
3717 # PCI Express Active State Power Management (PCIe ASPM):
3718 # default, performance, powersave.
3719 PCIE_ASPM_ON_AC=performance
3720 PCIE_ASPM_ON_BAT=powersave
3721
3722 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3723 # auto = mid on BAT, high on AC; default = use hardware defaults.
3724 RADEON_POWER_PROFILE_ON_AC=high
3725 RADEON_POWER_PROFILE_ON_BAT=low
3726
3727 # Radeon dynamic power management method (DPM): battery, performance.
3728 RADEON_DPM_STATE_ON_AC=performance
3729 RADEON_DPM_STATE_ON_BAT=battery
3730
3731 # Radeon DPM performance level: auto, low, high; auto is recommended.
3732 RADEON_DPM_PERF_LEVEL_ON_AC=auto
3733 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3734
3735 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3736 WIFI_PWR_ON_AC=off
3737 WIFI_PWR_ON_BAT=on
3738
3739 # Disable wake on LAN: Y/N.
3740 WOL_DISABLE=Y
3741
3742 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3743 # A value of 0 disables, >=1 enables power saving (recommended: 1).
3744 SOUND_POWER_SAVE_ON_AC=0
3745 SOUND_POWER_SAVE_ON_BAT=0
3746
3747 # Disable controller too (HDA only): Y/N.
3748 SOUND_POWER_SAVE_CONTROLLER=N
3749
3750 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3751 # Drive can be powered on again by releasing (and reinserting) the eject lever
3752 # or by pressing the disc eject button on newer models.
3753 # Note: an UltraBay/MediaBay hard disk is never powered off.
3754 BAY_POWEROFF_ON_AC=0
3755 BAY_POWEROFF_ON_BAT=0
3756 # Optical drive device to power off (default sr0).
3757 BAY_DEVICE="sr0"
3758
3759 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3760 RUNTIME_PM_ON_AC=on
3761 RUNTIME_PM_ON_BAT=auto
3762
3763 # Exclude PCI(e) device adresses the following list from Runtime PM
3764 # (separate with spaces). Use lspci to get the adresses (1st column).
3765 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3766 RUNTIME_PM_BLACKLIST="01:00.0"
3767
3768 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3769 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3770 # prevents accidential power-on of dGPU in hybrid graphics setups.
3771 # Use "" to disable the feature completely.
3772 # Separate multiple drivers with spaces.
3773 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3774
3775 # Set to 0 to disable, 1 to enable USB autosuspend feature.
3776 USB_AUTOSUSPEND=1
3777
3778 # Exclude listed devices from USB autosuspend (separate with spaces).
3779 # Use lsusb to get the ids.
3780 # Note: input devices (usbhid) are excluded automatically
3781 #USB_BLACKLIST="1111:2222 3333:4444"
3782
3783 # Bluetooth devices are excluded from USB autosuspend:
3784 # 0=do not exclude, 1=exclude.
3785 USB_BLACKLIST_BTUSB=0
3786
3787 # Phone devices are excluded from USB autosuspend:
3788 # 0=do not exclude, 1=exclude (enable charging).
3789 USB_BLACKLIST_PHONE=0
3790
3791 # Printers are excluded from USB autosuspend:
3792 # 0=do not exclude, 1=exclude.
3793 USB_BLACKLIST_PRINTER=1
3794
3795 # WWAN devices are excluded from USB autosuspend:
3796 # 0=do not exclude, 1=exclude.
3797 USB_BLACKLIST_WWAN=1
3798
3799 # Include listed devices into USB autosuspend even if already excluded
3800 # by the blacklists above (separate with spaces).
3801 # Use lsusb to get the ids.
3802 #USB_WHITELIST="1111:2222 3333:4444"
3803
3804 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3805 # (workaround for USB devices that cause shutdown problems).
3806 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3807
3808 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3809 # on system startup: 0=disable, 1=enable.
3810 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3811 # are ignored when this is enabled!
3812 #RESTORE_DEVICE_STATE_ON_STARTUP=0
3813 RESTORE_DEVICE_STATE_ON_STARTUP=1
3814
3815 # Radio devices to disable on startup: bluetooth, wifi, wwan.
3816 # Separate multiple devices with spaces.
3817 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3818
3819 # Radio devices to enable on startup: bluetooth, wifi, wwan.
3820 # Separate multiple devices with spaces.
3821 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3822
3823 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3824 # (workaround for devices that are blocking shutdown).
3825 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3826
3827 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3828 # (to prevent other operating systems from missing radios).
3829 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3830
3831 # Radio devices to enable on AC: bluetooth, wifi, wwan.
3832 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3833
3834 # Radio devices to disable on battery: bluetooth, wifi, wwan.
3835 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3836
3837 # Radio devices to disable on battery when not in use (not connected):
3838 # bluetooth, wifi, wwan.
3839 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3840
3841 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3842 # required). Charging starts when the remaining capacity falls below the
3843 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3844 # Main / Internal battery (values in %)
3845 #START_CHARGE_THRESH_BAT0=75
3846 #STOP_CHARGE_THRESH_BAT0=80
3847 # Ultrabay / Slice / Replaceable battery (values in %)
3848 #START_CHARGE_THRESH_BAT1=75
3849 #STOP_CHARGE_THRESH_BAT1=80
3850
3851 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3852 #RESTORE_THRESHOLDS_ON_BAT=1
3853
3854 # ------------------------------------------------------------------------------
3855 # tlp-rdw - Parameters for the radio device wizard
3856 # Possible devices: bluetooth, wifi, wwan.
3857
3858 # Hints:
3859 # - Parameters are disabled by default, remove the leading # to enable them
3860 # - Separate multiple radio devices with spaces
3861
3862 # Radio devices to disable on connect.
3863 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3864 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3865 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3866
3867 # Radio devices to enable on disconnect.
3868 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3869 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3870 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3871
3872 # Radio devices to enable/disable when docked.
3873 #DEVICES_TO_ENABLE_ON_DOCK=""
3874 #DEVICES_TO_DISABLE_ON_DOCK=""
3875
3876 # Radio devices to enable/disable when undocked.
3877 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3878 #DEVICES_TO_DISABLE_ON_UNDOCK=""
3879 #+end_src
3880
3881 ** X
3882
3883 *** xprofile
3884 :PROPERTIES:
3885 :header-args+: :tangle ~/.xprofile
3886 :END:
3887
3888 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
3889 contrary, it's automatically sourced by LightDM, my display manager of
3890 choice.
3891
3892 #+begin_src sh
3893 xset -b # disable bell
3894 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
3895
3896 # setxkbmap -option compose:ralt
3897
3898 setxkbmap -option ctrl:nocaps # turn capslock into control
3899 setxkbmap -option altwin:swap_alt_win # swap alt and super
3900
3901 if [ $(hostname) = "plasma" ]
3902 then
3903 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
3904 fi
3905
3906 if [ $(hostname) = "enigma" ]
3907 then
3908 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
3909 fi
3910
3911 light -Scrs "intel_backlight" 2
3912
3913 source $HOME/.zprofile
3914
3915 export _JAVA_AWT_WM_NONREPARENTING=1
3916 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
3917
3918 if [ $(hostname) = "plasma" ]
3919 then
3920 unlock-def-gk.py &
3921 fi
3922
3923 bspwm &
3924 #+end_src
3925
3926 *** X resources
3927
3928 **** Xresources
3929 :PROPERTIES:
3930 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
3931 :END:
3932
3933 #+begin_src conf-xdefaults
3934 #include ".Xresources.d/fonts"
3935 ! #include ".Xresources.d/colors"
3936 #include ".Xresources.d/emacs"
3937 #include ".Xresources.d/rxvt-unicode"
3938 #+end_src
3939
3940 **** Xresources.d
3941
3942 ***** fonts
3943 :PROPERTIES:
3944 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
3945 :END:
3946
3947 #+begin_src conf-xdefaults
3948 Xft.lcdfilter: lcddefault
3949 Xft.antialias: true
3950 Xft.autohint: 0
3951 Xft.hinting: true
3952 Xft.hintstyle: hintslight
3953 ! Xft.hintstyle: hintfull
3954 Xft.rgba: rgb
3955 Xft.dpi: 96
3956 #+end_src
3957
3958 ***** colors
3959 :PROPERTIES:
3960 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
3961 :END:
3962
3963 #+begin_src conf-xdefaults :tangle no
3964 #include "gruvbox-light.xresources"
3965 ! #include "gruvbox-dark.xresources"
3966 #include "gruvbox-urxvt256.xresources"
3967 #+end_src
3968
3969 #+begin_src conf-xdefaults :tangle no
3970 ! -----------------------------------------------------------------------------
3971 ! File: gruvbox-light.xresources
3972 ! Description: Retro groove colorscheme generalized
3973 ! Author: morhetz <morhetz@gmail.com>
3974 ! Source: https://github.com/morhetz/gruvbox-generalized
3975 ! Last Modified: 6 Sep 2014
3976 ! -----------------------------------------------------------------------------
3977
3978 ! hard contrast: *background: #f9f5d7
3979 *background: #fbf1c7
3980 ! soft contrast: *background: #f2e5bc
3981 *foreground: #3c3836
3982 ! Black + DarkGrey
3983 *color0: #fdf4c1
3984 *color8: #928374
3985 ! DarkRed + Red
3986 *color1: #cc241d
3987 *color9: #9d0006
3988 ! DarkGreen + Green
3989 *color2: #98971a
3990 *color10: #79740e
3991 ! DarkYellow + Yellow
3992 *color3: #d79921
3993 *color11: #b57614
3994 ! DarkBlue + Blue
3995 *color4: #458588
3996 *color12: #076678
3997 ! DarkMagenta + Magenta
3998 *color5: #b16286
3999 *color13: #8f3f71
4000 ! DarkCyan + Cyan
4001 *color6: #689d6a
4002 *color14: #427b58
4003 ! LightGrey + White
4004 *color7: #7c6f64
4005 *color15: #3c3836
4006 #+end_src
4007
4008 #+begin_src conf-xdefaults :tangle no
4009 ! -----------------------------------------------------------------------------
4010 ! File: gruvbox-dark.xresources
4011 ! Description: Retro groove colorscheme generalized
4012 ! Author: morhetz <morhetz@gmail.com>
4013 ! Source: https://github.com/morhetz/gruvbox-generalized
4014 ! Last Modified: 6 Sep 2014
4015 ! -----------------------------------------------------------------------------
4016
4017 ! hard contrast: *background: #1d2021
4018 *background: #282828
4019 ! soft contrast: *background: #32302f
4020 *foreground: #ebdbb2
4021 ! Black + DarkGrey
4022 *color0: #282828
4023 *color8: #928374
4024 ! DarkRed + Red
4025 *color1: #cc241d
4026 *color9: #fb4934
4027 ! DarkGreen + Green
4028 *color2: #98971a
4029 *color10: #b8bb26
4030 ! DarkYellow + Yellow
4031 *color3: #d79921
4032 *color11: #fabd2f
4033 ! DarkBlue + Blue
4034 *color4: #458588
4035 *color12: #83a598
4036 ! DarkMagenta + Magenta
4037 *color5: #b16286
4038 *color13: #d3869b
4039 ! DarkCyan + Cyan
4040 *color6: #689d6a
4041 *color14: #8ec07c
4042 ! LightGrey + White
4043 *color7: #a89984
4044 *color15: #ebdbb2
4045 #+end_src
4046
4047 #+begin_src conf-xdefaults :tangle no
4048 ! -----------------------------------------------------------------------------
4049 ! File: gruvbox-urxvt256.xresources
4050 ! Description: Retro groove colorscheme generalized
4051 ! Author: morhetz <morhetz@gmail.com>
4052 ! Source: https://github.com/morhetz/gruvbox-generalized
4053 ! Last Modified: 13 Dec 2013
4054 ! -----------------------------------------------------------------------------
4055
4056 URxvt.color24: #076678
4057 URxvt.color66: #427b58
4058 URxvt.color88: #9d0006
4059 URxvt.color96: #8f3f71
4060 URxvt.color100: #79740e
4061 URxvt.color108: #8ec07c
4062 URxvt.color109: #83a598
4063 URxvt.color130: #af3a03
4064 URxvt.color136: #b57614
4065 URxvt.color142: #b8bb26
4066 URxvt.color167: #fb4934
4067 URxvt.color175: #d3869b
4068 URxvt.color208: #fe8019
4069 URxvt.color214: #fabd2f
4070 URxvt.color223: #ebdbb2
4071 URxvt.color228: #f2e5bc
4072 URxvt.color229: #fbf1c7
4073 URxvt.color230: #f9f5d7
4074 URxvt.color234: #1d2021
4075 URxvt.color235: #282828
4076 URxvt.color236: #32302f
4077 URxvt.color237: #3c3836
4078 URxvt.color239: #504945
4079 URxvt.color241: #665c54
4080 URxvt.color243: #7c6f64
4081 URxvt.color244: #928374
4082 URxvt.color245: #928374
4083 URxvt.color246: #a89984
4084 URxvt.color248: #bdae93
4085 URxvt.color250: #d5c4a1
4086 #+end_src
4087
4088 ***** emacs
4089 :PROPERTIES:
4090 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4091 :END:
4092
4093 #+begin_src conf-xdefaults
4094 Emacs.menuBar: off
4095 Emacs.toolBar: off
4096 Emacs.verticalScrollBars: off
4097 Emacs.cursorBlink: off
4098 Emacs.FontBackend: xft,x
4099 ! Emacs.font: Ubuntu Mono-12
4100 ! Emacs.font: Triplicate T4C-11
4101 ! Emacs.font: Ubuntu Mono-10.5
4102 ! Emacs.font: Ubuntu Mono-12
4103 ! Emacs.font: Iosevka-11
4104
4105 ! Emacs.font: Fira Mono:size=15
4106 ! Emacs.font: DejaVu Sans Mono:size=15
4107 ! Emacs.font: Inconsolata:size=17
4108 ! Emacs.font: Inconsolata:size=16
4109 ! Emacs.font: Inconsolata LGC:size=14
4110 ! Emacs.font: Source Code Pro Medium-10.5
4111 Emacs.font: Ubuntu Mono:size=16
4112 ! Emacs.font: Iosevka:size=16
4113 #+end_src
4114
4115 ***** rxvt-unicode
4116 :PROPERTIES:
4117 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4118 :END:
4119
4120 #+begin_src conf-xdefaults
4121 ! Font
4122 URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4123 URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4124 URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4125 URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4126
4127 URxvt.xftAntialias: true
4128 URxvt.letterSpace: 0
4129
4130 URxvt.depth: 0
4131 URxvt.loginShell: true
4132 URxvt.saveLines: 100000
4133 URxvt.internalBorder: 3
4134 URxvt.lineSpace: 0
4135 URxvt.scrollBar: false
4136 URxvt.scrollStyle: rxvt
4137 URxvt*scrollTtyOutput: false
4138 URxvt*scrollWithBuffer: true
4139 URxvt*scrollTtyKeypress: true
4140 URxvt.keysym.Shift-Up: command:\033]720;1\007
4141 URxvt.keysym.Shift-Down: command:\033]721;1\007
4142
4143 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4144 URxvt.perl-ext: bidi
4145 URxvt.bidi.enabled: 1
4146 URxvt.url-select.launcher: firefox
4147 URxvt.url-select.underline: true
4148 URxvt.keysym.M-u: perl:url-select:select_next
4149 URxvt.keysym.M-Escape: perl:keyboard-select:activate
4150 URxvt.keysym.M-s: perl:keyboard-select:search
4151 URxvt.url-launcher: /usr/bin/firefox
4152 URxvt.matcher.button: 1
4153 URxvt.iso14755: false
4154 URxvt.iso14755_53: false
4155 URxvt.keysym.M-c: perl:clipboard:copy
4156 URxvt.keysym.M-v: perl:clipboard:paste
4157 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4158 URxvt.keysym.C-Up: font-size:increase
4159 URxvt.keysym.C-Down: font-size:decrease
4160 URxvt.keysym.C-S-Up: font-size:incglobal
4161 URxvt.keysym.C-S-Down: font-size:decglobal
4162 URxvt.keysym.C-equal: font-size:reset
4163 !URxvt.keysym.C-question: font-size:show
4164
4165 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4166
4167 !urxvt*foreground: white
4168 !urxvt*background: black
4169
4170 !*color0: #2E3436
4171 !*color1: #a40000
4172 !*color2: #4E9A06
4173 !*color3: #C4A000
4174 !*color4: #3465A4
4175 !*color5: #75507B
4176 !*color6: #ce5c00
4177 !*color7: #babdb9
4178 !*color8: #555753
4179 !*color9: #EF2929
4180 !*color10: #8AE234
4181 !*color11: #FCE94F
4182 !*color12: #729FCF
4183 !*color13: #AD7FA8
4184 !*color14: #fcaf3e
4185 !*color15: #EEEEEC
4186
4187 !URxvt.foreground: #C8C8C8
4188 !URxvt.background: #FFFFFF
4189
4190 !! black
4191 !*color0: #2E3436
4192 !*color8: #555753
4193 !! red
4194 !*color1: #a40000
4195 !*color9: #EF2929
4196 !! green
4197 !*color2: #4E9A06
4198 !*color10: #8AE234
4199 !! yellow
4200 !*color3: #C4A000
4201 !*color11: #FCE94F
4202 !! blue
4203 !*color4: #3465A4
4204 !*color12: #729FCF
4205 !! purple
4206 !*color5: #75507B
4207 !*color13: #AD7FA8
4208 !! orange (replaces cyan)
4209 !*color6: #ce5c00
4210 !*color14: #fcaf3e
4211 !! white
4212 !*color7: #babdb9
4213 !*color15: #EEEEEC
4214
4215 ! Tango colour theme for rxvt-unicode
4216 URxvt.background: #FFFFFF
4217 URxvt.foreground: #000000
4218
4219 ! Black
4220 URxvt.color0: #2E3436
4221 URxvt.color8: #757773
4222
4223 ! Red
4224 URxvt.color1: #CC0000
4225 URxvt.color9: #EF2929
4226
4227 ! Green
4228 URxvt.color2: #4E9A06
4229 URxvt.color10: #8AE234
4230
4231 ! Yellow
4232 URxvt.color3: #C4A000
4233 URxvt.color11: #FCE94F
4234
4235 ! Blue
4236 URxvt.color4: #3465A4
4237 URxvt.color12: #729FCF
4238
4239 ! Magenta
4240 URxvt.color5: #75507B
4241 URxvt.color13: #AD7FA8
4242
4243 !! Cyan
4244 !URxvt.color6: #06989A
4245 !URxvt.color14: #34E2E2
4246 ! orange (replaces cyan)
4247 *color6: #ce5c00
4248 *color14: #fcaf3e
4249
4250 ! White
4251 URxvt.color7: #D3D7CF
4252 URxvt.color15: #EEEEEC
4253 #+end_src
4254
4255 ** XDG
4256 :PROPERTIES:
4257 :header-args+: :tangle ~/.config/user-dirs.dirs
4258 :END:
4259
4260 #+begin_src conf
4261 XDG_DESKTOP_DIR="$HOME/Desktop"
4262 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4263 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4264 XDG_MUSIC_DIR="$HOME/usr/music"
4265 XDG_PICTURES_DIR="$HOME/usr/pics"
4266 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4267 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4268 XDG_VIDEOS_DIR="$HOME/usr/vids"
4269 #+end_src
4270
4271 ** Zathura
4272 :PROPERTIES:
4273 :header-args+: :tangle ~/.config/zathura/zathurarc
4274 :END:
4275
4276 #+begin_src conf
4277 set smooth-scroll true
4278 set selection-clipboard clipboard
4279 set zoom-step 05
4280 set default-bg "#272727"
4281 set statusbar-bg "#272727"
4282 set inputbar-bg "#373737"
4283 #+end_src
4284
4285 ** Zsh
4286
4287 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4288 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4289 installed.
4290
4291 *** zimrc
4292 :PROPERTIES:
4293 :header-args+: :tangle ~/.zimrc
4294 :END:
4295
4296 #+begin_src sh
4297
4298
4299 #################
4300 # CORE SETTINGS #
4301 #################
4302
4303 #
4304 # Zim settings
4305 #
4306
4307 # Select what modules you would like enabled.
4308 # The second line of modules may depend on options set by modules in the first
4309 # line. These dependencies are noted on the respective module's README.md.
4310 zmodules=(directory environment git git-info history input ssh utility custom \
4311 syntax-highlighting history-substring-search prompt completion)
4312
4313
4314 ###################
4315 # MODULE SETTINGS #
4316 ###################
4317
4318 #
4319 # Prompt
4320 #
4321
4322 # Set your desired prompt here
4323 zprompt_theme='pure'
4324 #PURE_PROMPT_SYMBOL=λ
4325 #PURE_PROMPT_SYMBOL=δ
4326 PURE_PROMPT_SYMBOL=➜
4327
4328 #
4329 # Completion
4330 #
4331
4332 # set an optional host-specific filename for the completion cache file
4333 # if none is provided, the default '.zcompdump' is used.
4334 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4335
4336 #
4337 # Utility
4338 #
4339
4340 # Uncomment to enable command correction prompts
4341 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4342 setopt CORRECT
4343
4344 #
4345 # Environment
4346 #
4347
4348 # Set the string below to the desired terminal title format string.
4349 # The terminal title is redrawn upon directory change, however, variables like
4350 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4351 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4352 # The example below uses the following format: 'username@host:/current/directory'
4353 ztermtitle='%n@%m:%~'
4354
4355 #
4356 # Input
4357 #
4358
4359 # Uncomment to enable double-dot expansion.
4360 # This appends '../' to your input for each '.' you type after an initial '..'
4361 #zdouble_dot_expand='true'
4362
4363 #
4364 # Syntax-Highlighting
4365 #
4366
4367 # This determines what highlighters will be used with the syntax-highlighting module.
4368 # Documentation of the highlighters can be found here:
4369 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4370 # For (u)rxvt, termite and gnome-terminal users,
4371 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4372 #zhighlighters=(main brackets cursor)
4373 zhighlighters=(main brackets pattern)
4374
4375
4376 #
4377 # SSH
4378 #
4379
4380 # Load these ssh identities with the ssh module
4381 zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4382
4383
4384 #
4385 # Pacman
4386 #
4387
4388 # Set (optional) pacman front-end.
4389 zpacman_frontend='yay'
4390
4391 # Load any helper scripts as defined here
4392 #zpacman_helper=(aur)
4393 #+end_src
4394
4395 *** zlogin
4396 :PROPERTIES:
4397 :header-args+: :tangle ~/.zlogin
4398 :END:
4399
4400 #+begin_src sh
4401
4402
4403 #
4404 # User configuration sourced by login shells
4405 #
4406
4407 # Initialize zim
4408 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4409 #+end_src
4410
4411 *** zprofile
4412 :PROPERTIES:
4413 :header-args+: :tangle ~/.zprofile
4414 :END:
4415
4416 #+begin_src sh
4417 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4418 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4419 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4420 export XDG_CONFIG_HOME=$HOME/.config
4421 export XDG_DATA_HOME=$HOME/.local/share
4422 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4423 export MAILDIR="$HOME/mail"
4424 export CVS_RSH=ssh
4425 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4426 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4427 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4428
4429 # Eiffel2Java stuff
4430 #export JAVA_HOME=/usr/lib/jvm/default
4431 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4432 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4433 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4434
4435 #export PATH="$HOME/usr/build/pvs:$PATH"
4436 #export SBCLISP_HOME=/usr/share/sbcl-source
4437 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4438
4439 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4440
4441 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4442 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4443
4444 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4445 #+end_src
4446
4447 *** zshenv
4448 :PROPERTIES:
4449 :header-args+: :tangle ~/.zshenv
4450 :END:
4451
4452 #+begin_src sh
4453 # Ensure that a non-login, non-interactive shell has a defined environment.
4454 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4455 source "${ZDOTDIR:-$HOME}/.zprofile"
4456 fi
4457 #+end_src
4458
4459 *** zshrc
4460 :PROPERTIES:
4461 :header-args+: :tangle ~/.zshrc
4462 :END:
4463
4464 #+begin_src sh
4465 # Bash-like navigation
4466 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4467 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4468 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4469 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4470
4471 #disable -r time # disable shell reserved word
4472 #alias time='time -p' # -p for POSIX output
4473
4474 # rehash if last command was pacaur or pacman
4475 # (so that zsh picks up changes in $PATH immediately)
4476 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4477
4478 #
4479 # User configuration sourced by interactive shells
4480 #
4481
4482 # Change default zim location
4483 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4484
4485 # Start zim
4486 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4487
4488 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4489 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4490
4491 setopt globdots
4492
4493 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4494 source ~/.zsh/zsh-autopair/autopair.zsh
4495
4496
4497 ### fzf ###
4498
4499 source /usr/share/fzf/key-bindings.zsh
4500 source /usr/share/fzf/completion.zsh
4501
4502 # Accept history selection instead of putting it on
4503 # the command line
4504 fzf-history-widget-accept() {
4505 fzf-history-widget
4506 zle accept-line
4507 }
4508 #zle -N fzf-history-widget-accept
4509 #bindkey '^R' fzf-history-widget-accept
4510
4511 # alt+c preview
4512 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4513
4514 ### fzf ###
4515
4516
4517 # aliases
4518 alias mpv="mpv --ytdl-format mp4"
4519 alias mv="mv -iv"
4520 alias cp="cp -iv"
4521 alias scl=systemctl
4522 alias jcl=journalctl
4523 alias m="mbsync -Va; getmail; notmuch new"
4524 alias best="youtube-dl -f best"
4525 alias nixx="ssh amin@nix.aminb.org"
4526 alias fence="ssh aminb@fencepost.gnu.org"
4527
4528 aur() {
4529 cd ~/usr/build
4530 git clone https://aur.archlinux.org/${1}.git
4531 cd ${1}
4532 }
4533
4534 # i-beam cursor
4535 echo -e "\033[5 q"
4536 #echo -e "\033[6 q"
4537 #+end_src
4538
4539 * Scripts
4540
4541 This section contains various useful scripts and the ones used by the
4542 programs above. For instance, =toggle-tablet= for switching to and
4543 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4544 Xfce's presentation mode which keeps the screen awake, and
4545 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4546 exact brightness value.
4547
4548 ** rofi-light
4549 :PROPERTIES:
4550 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4551 :END:
4552
4553 #+begin_src bash
4554 cur=$(light -G)
4555 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
4556 light -S $val
4557 #+end_src
4558
4559 ** toggle-layout
4560 :PROPERTIES:
4561 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4562 :END:
4563
4564 #+begin_src bash
4565 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4566
4567 if [ "$lang" = "us" ]; then
4568 setxkbmap ir
4569 else
4570 setxkbmap us
4571 # xmodmap $HOME/.Xmodmap
4572 fi
4573 #+end_src
4574
4575 ** toggle-presentation-mode
4576 :PROPERTIES:
4577 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4578 :END:
4579
4580 #+begin_src bash
4581 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4582 #+end_src
4583
4584 ** toggle-tablet
4585 :PROPERTIES:
4586 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4587 :END:
4588
4589 This script toggles between a 'normal' mode and a 'tablet' mode, doing
4590 a few things:
4591
4592 - rotates the screen using =xrandr=, so that rotating the physical
4593 display of my X220t would have the laptop's battery on the right
4594 hand side,
4595 - enables touch screen,
4596 - properly rotates the stylus pen and touch screen pointers, and
4597 - toggles between RGB and Vertical BGR sub-pixel order.
4598
4599 #+begin_src bash
4600 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4601 0) # Screen is not rotated, we should rotate it right (90°)
4602 xrandr -o 3
4603 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4604 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4605 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4606 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4607 ;;
4608 1) # Currently top is rotated right, we should set it normal (0°)
4609 xrandr -o 0
4610 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4611 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4612 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4613 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4614 ;;
4615 *)
4616 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4617 exit 1
4618 ;;
4619 esac
4620 #+end_src
4621
4622 ** unlock-def-gk.py
4623 :PROPERTIES:
4624 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4625 :END:
4626
4627 #+begin_src python
4628 import gnomekeyring as gk
4629 # list_item_ids_sync('login')[0] == 1L
4630 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4631 #+end_src
4632
4633 ** wp
4634
4635 My little wallpaper changer script.
4636
4637 *** wp
4638 :PROPERTIES:
4639 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4640 :END:
4641
4642 #+begin_src bash :tangle no
4643 export DISPLAY=:0
4644
4645 case "$1" in
4646 "day")
4647 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4648 ;;
4649 "night")
4650 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4651 ;;
4652 *)
4653 echo $"Usage: $0 {day|night}"
4654 exit 1
4655 esac
4656 #+end_src
4657
4658 *** wp-auto
4659 :PROPERTIES:
4660 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4661 :END:
4662
4663 #+begin_src bash :tangle no
4664 SED=$(which sed)
4665 ROFI=$(which rofi)
4666
4667 export DISPLAY=:0
4668 HOUR=$(date +%H)
4669
4670 if [ -z "${SED}" ]
4671 then
4672 echo "Did not find 'sed', script cannot continue."
4673 exit 1
4674 fi
4675 if [ -z "${ROFI}" ]
4676 then
4677 echo "Did not find rofi, there is no point to continue."
4678 exit 1
4679 fi
4680
4681 ###
4682 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4683 # Repeated calls should leave the config clean-ish
4684 ###
4685 function set_theme()
4686 {
4687 CDIR="${HOME}/.config/rofi/"
4688 if [ ! -d "${CDIR}" ]
4689 then
4690 mkdir -p ${CDIR}
4691 fi
4692 if [ -f "${CDIR}/config" ]
4693 then
4694 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4695 fi
4696 echo "rofi.theme: ${1}" >> "${CDIR}/config"
4697
4698 }
4699
4700 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4701 then
4702 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4703 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4704 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4705 else
4706 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4707 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4708 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4709 fi
4710 #+end_src
4711
4712 *** wp.service
4713 :PROPERTIES:
4714 :header-args+: :tangle ~/.config/systemd/user/wp.service
4715 :END:
4716
4717 #+begin_src conf :tangle no
4718 [Unit]
4719 Description=wallpaper service
4720
4721 [Service]
4722 Type=oneshot
4723 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4724 #+end_src
4725
4726 *** wp.timer
4727 :PROPERTIES:
4728 :header-args+: :tangle ~/.config/systemd/user/wp.timer
4729 :END:
4730
4731 #+begin_src conf :tangle no
4732 [Unit]
4733 [Unit]
4734 Description=wallpaper timer
4735
4736 [Timer]
4737 OnCalendar=07,21:00
4738 Unit=wp.service
4739 Persistent=true
4740
4741 [Install]
4742 WantedBy=timers.target
4743 #+end_src
4744
4745 ** zathura-sync.sh
4746 :PROPERTIES:
4747 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
4748 :END:
4749
4750 #+begin_src sh
4751 pos="$1"
4752 pdffile="$2"
4753 zathura --synctex-forward "$pos" "$pdffile" || \
4754 (
4755 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
4756 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
4757 #+end_src
4758 ** Fun :)
4759
4760 *** eat-em
4761 :PROPERTIES:
4762 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
4763 :END:
4764
4765 #+begin_src sh
4766 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4767 # [ESC] character in original post removed here.
4768
4769 # ANSI Color -- use these variables to easily have different color
4770 # and format output. Make sure to output the reset sequence after
4771 # colors (f = foreground, b = background), and use the 'off'
4772 # feature for anything you turn on.
4773
4774 initializeANSI()
4775 {
4776 esc="$(echo -en '\e')"
4777
4778 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
4779 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
4780 cyanf="${esc}[36m"; whitef="${esc}[37m"
4781
4782 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
4783 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
4784 cyanb="${esc}[46m"; whiteb="${esc}[47m"
4785
4786 boldon="${esc}[1m"; boldoff="${esc}[22m"
4787 italicson="${esc}[3m"; italicsoff="${esc}[23m"
4788 ulon="${esc}[4m"; uloff="${esc}[24m"
4789 invon="${esc}[7m"; invoff="${esc}[27m"
4790
4791 reset="${esc}[0m"
4792 }
4793
4794 # note in this first use that switching colors doesn't require a reset
4795 # first - the new color overrides the old one.
4796
4797 #clear
4798
4799 initializeANSI
4800
4801 cat << EOF
4802
4803 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
4804 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4805 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4806 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
4807 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
4808 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
4809
4810 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
4811 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4812 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4813 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
4814 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
4815 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
4816
4817 EOF
4818 #+end_src
4819
4820 *** invade-em
4821 :PROPERTIES:
4822 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
4823 :END:
4824
4825 #+begin_src bash
4826 #
4827 # ANSI color scheme script featuring Space Invaders
4828 #
4829 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4830 # Modified by lolilolicon
4831 #
4832
4833 f=3 b=4
4834 for j in f b; do
4835 for i in {0..7}; do
4836 printf -v $j$i %b "\e[${!j}${i}m"
4837 done
4838 done
4839 bld=$'\e[1m'
4840 rst=$'\e[0m'
4841
4842 cat << EOF
4843
4844 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4845 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4846 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
4847 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
4848
4849 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4850 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4851 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
4852 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
4853
4854
4855 $f7▌$rst
4856
4857 $f7▌$rst
4858
4859 $f7 ▄█▄ $rst
4860 $f7▄█████████▄$rst
4861 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
4862
4863 EOF
4864 #+end_src