[emacs] some pdf-tools customizations
[~bandali/configs] / rc.org
1 #+title: rc.org
2 #+property: header-args :comments link :mkdirp yes :results silent
3
4 * About
5
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
9
10 Note: This file is best viewed inside Emacs with org mode.
11
12 * Configs
13
14 This section contains the configuration files (dotfiles) of various
15 programs I use.
16
17 ** bspwm
18
19 *** bspwmrc
20 :PROPERTIES:
21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22 :END:
23
24 #+begin_src sh :tangle no
25 sxhkd &
26 sh ~/.fehbg &
27 xfce4-panel -d &
28 compton &
29 sleep 0.5 && pasystray --notify=all &
30
31 bspc monitor -d I II III IV V VI VII VIII IX X
32 #bspc monitor eDP-1 -d I II III IV V
33 #bspc monitor HDMI-1 -d VI VII VIII IX X
34
35 #bspc config border_width 2
36 #bspc config window_gap 8
37 bspc config window_gap 0
38
39 bspc config bottom_padding 26
40
41 bspc config split_ratio 0.52
42 bspc config borderless_monocle true
43 bspc config gapless_monocle true
44 bspc config click_to_focus button1
45 bspc config directional_focus_tightness low
46
47 #bspc rule -a Firefox desktop='^1' follow=on
48 bspc rule -a Nightly desktop='^1' follow=on
49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
50 #bspc rule -a Chromium desktop='^4' follow=on
51 bspc rule -a URxvt state=floating
52 bspc rule -a URxvt:tiled state=tiled
53 bspc rule -a Connman-gtk state=floating
54 bspc rule -a Xfce4-panel state=floating
55 bspc rule -a TelegramDesktop state=floating
56 bspc rule -a Ec state=floating
57 bspc rule -a Pavucontrol state=floating
58 bspc rule -a Eog state=floating
59 bspc rule -a Seahorse state=floating
60 bspc rule -a mpv state=floating
61 bspc rule -a Evince state=floating
62 bspc rule -a Meld state=floating
63 bspc rule -a Autokey-gtk state=floating
64 bspc rule -a Mousepad state=floating
65 bspc rule -a Wrapper-1.0 state=floating
66 bspc rule -a File-roller state=floating
67 bspc rule -a Gnome-disks state=floating
68 bspc rule -a Termite state=floating
69 bspc rule -a Termite:tiled state=tiled
70 bspc rule -a Thunderbird:Calendar state=floating
71 bspc rule -a Audacity state=floating
72 bspc rule -a Proof state=floating # pvs x-show-proof
73 bspc rule -a Nm-connection-editor state=floating
74 bspc rule -a Wire state=floating
75 bspc rule -a discord state=floating
76 bspc rule -a X2goclient state=floating
77 bspc rule -a SimpleScreenRecorder state=floating
78 bspc rule -a Gimp state=floating
79 bspc rule -a Wrapper-2.0 state=floating
80 bspc rule -a Zathura state=tiled
81 #+end_src
82
83 *** sxhkdrc
84 :PROPERTIES:
85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86 :END:
87
88 #+begin_src conf :tangle no
89 #
90 # wm independent hotkeys
91 #
92
93 # terminal emulator
94 super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97 #super + {_,shift} + Return
98 # termite{_, --name=tiled}
99
100 # program launcher
101 super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104 super + alt + space
105 xfce4-popup-whiskermenu
106
107 # window finder
108 super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111 # password manager
112 alt + space
113 rofi-pass
114
115 # firefox
116 #super + r
117 # firefox
118
119 # chromium
120 #super + c
121 # chromium -incognito
122
123 # emacs
124 super + e
125 emacs
126
127 # make sxhkd reload its configuration files:
128 super + Escape
129 pkill -USR1 -x sxhkd
130
131 # volume {up,down}
132 XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135 # mute
136 XF86AudioMute
137 pamixer --toggle-mute
138
139 XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142 # playback control
143 XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146 # lock the screen
147 super + shift + q
148 light-locker-command -l
149
150 # Toggle keyboard layout
151 super + F7
152 toggle-layout
153
154 # Toggle Xfce presentation mode
155 XF86LaunchB
156 toggle-presentation-mode
157
158 # monitor brightness
159 XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162 super + apostrophe
163 rofi-light
164
165 # keyboard brightness
166 #XF86KbdBrightness{Up,Down}
167 # kbdlight {up,down}
168
169 XF86RotateWindows
170 toggle-tablet
171
172 #
173 # bspwm hotkeys
174 #
175
176 # quit bspwm normally
177 super + alt + Escape
178 bspc quit
179
180 # close and kill
181 super + {w,q}
182 bspc node -{c,k}
183
184 # alternate between the tiled and monocle layout
185 super + m
186 bspc desktop -l next
187
188 # send the newest marked node to the newest preselected node
189 super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192 # swap the current node and the biggest node
193 super + g
194 bspc node -s biggest
195
196 #
197 # state/flags
198 #
199
200 # set the window state
201 super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204 # set the node flags
205 super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208 #
209 # focus/swap
210 #
211
212 # focus the node in the given direction
213 super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216 # focus the node for the given path jump
217 super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220 # focus the next/previous node in the current desktop
221 super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224 # focus the next/previous desktop in the current monitor
225 super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228 # send to next/prev desktop
229 super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232 # focus the last node/desktop
233 super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236 # focus the older or newer node in the focus history
237 super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242 # focus or send to the given desktop
243 super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246 #
247 # preselect
248 #
249
250 # preselect the direction
251 super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254 # preselect the ratio
255 super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258 # cancel the preselection for the focused node
259 super + ctrl + space
260 bspc node -p cancel
261
262 # cancel the preselection for the focused desktop
263 super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266 #
267 # move/resize
268 #
269
270 # expand a window by moving one of its side outward
271 super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274 # contract a window by moving one of its side inward
275 super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278 # move a floating window
279 super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282 #alt + bracket{left,right}
283 # xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284 #+end_src
285
286 ** compton
287 :PROPERTIES:
288 :header-args+: :tangle ~/.config/compton.conf
289 :END:
290
291 #+begin_src conf :tangle no
292 # Shadow
293 shadow = false; # Enabled client-side shadows on windows.
294 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295 no-dnd-shadow = true; # Don't draw shadows on DND windows.
296 clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298 shadow-radius = 5; # The blur radius for shadows. (default 12)
299 shadow-offset-x = -5; # The left offset for shadows. (default -15)
300 shadow-offset-y = -5; # The top offset for shadows. (default -15)
301 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306 # shadow-exclude = "n:e:Notification";
307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311 # Opacity
312 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323 # blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326 # blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332 # Fading
333 fading = false; # Fade windows during opacity changes.
334 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338 fade-exclude = [ ]; # Exclude conditions for fading.
339
340 # Other
341 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355 dbe = false; # Enable DBE painting mode. Rarely needed.
356 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368 # GLX backend # GLX backend fine-tune options. See man page for more info.
369 glx-no-stencil = true; # Recommended.
370 glx-copy-from-front = false; # Useful with --glx-swap-method,
371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372 # glx-no-rebind-pixmap = true; # Recommended if it works.
373 glx-no-rebind-pixmap = true; # Recommended if it works.
374 #glx-swap-method = "4"; # See man page.
375 glx-swap-method = "4"; # See man page.
376
377 # Window type settings
378 wintypes:
379 {
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389 };
390 #+end_src
391
392 ** Dunst
393 :PROPERTIES:
394 :header-args+: :tangle ~/.config/dunst/dunstrc
395 :END:
396
397 #+begin_src conf
398 [global]
399 #font = Ubuntu Mono 10.5
400 font = Inconsolata 11
401
402 # Path to default icons.
403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405 icon_position = left
406 # <b>bold</b>
407 # <i>italic</i>
408 # <s>strikethrough<s/>
409 # <u>underline</u>
410 markup = full
411 # The format of the message. Possible variables are:
412 # %a appname
413 # %s summary
414 # %b body
415 # %i iconname (including its path)
416 # %I iconname (without its path)
417 # %p progress value if set ([ 0%] to [100%]) or nothing
418 # Markup is allowed
419 format = "<b>%s</b>\n%b"
420 # Sort messages by urgency
421 sort = yes
422 # Show how many messages are currently hidden (because of geometry)
423 indicate_hiddenl= no
424 # Alignment of message text.
425 # Possible values are "left", "center" and "right"
426 alignment = center
427 # The frequency with wich text that is longer than the notification
428 # window allows bounces back and forth.
429 # This option conflicts with 'word_wrap'.
430 # Set to 0 to disable
431 bounce_freq = 3
432 # show age of message if message is older than show_age_threshold seconds.
433 # set to -1 to disable
434 show_age_threshold = -1
435 # split notifications into multiple lines if they don't fit into geometry
436 word_wrap = yes
437 # ignore newlines '\n' in notifications
438 ignore_newline = no
439 # The geometry of the message window.
440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
441 # The height is measured in number of notifications everything else in pixels. If the width
442 # is omitted but the height is given ("-geometry x2"), the message window
443 # expands over the whole screen (dmenu-like). If width is 0,
444 # the window expands to the longest message displayed.
445 # A positive x is measured from the left, a negative from the
446 # right side of the screen. Y is measured from the top and down respectevly.
447 # The width can be negative. In this case the actual width is the
448 # screen width minus the width defined in within the geometry option.
449 #geometry = "410x12-12+12"
450 #geometry = "0x0-30-30"
451 geometry = "260x12-30-30"
452 # The transparency of the window. range: [0; 100]
453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454 transparency = 0
455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
456 # for longer than idle_threshold seconds.
457 # Set to 0 to disable.
458 idle_threshold = 120
459 # Which monitor should the notifications be displayed on.
460 monitor = 0
461 # Display notification on focused monitor. Possible modes are:
462 # mouse: follow mouse pointer
463 # keyboard: follow window with keyboard focus
464 # none: don't follow anything
465 #
466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467 # This should be the case for almost all modern windowmanagers.
468 #
469 # If this option is set to mouse or keyboard, the monitor option will be
470 # ignored.
471 follow = keyboard
472 # should a notification popped up from history be sticky or
473 # timeout as if it would normally do.
474 sticky_history = yes
475 # The height of a single line. If the height is smaller than the font height,
476 # it will get raised to the font height.
477 # This adds empty space above and under the text.
478 line_height = 0
479
480 show_indicators = yes
481
482 # Draw a line of 'separatpr_height' pixel height between two notifications.
483 # Set to 0 to disable
484 separator_height = 3
485 # padding between text and separator
486 padding = 8
487 # horizontal padding
488 horizontal_padding = 8
489 # Define a color for the separator.
490 # possible values are:
491 # * auto: dunst tries to find a color fitting to the background
492 # * foreground: use the same color as the foreground
493 # * frame: use the same color as the frame.
494 # * anything else will be interpreted as a X color
495 separator_color = foreground
496 # print a notification on startup
497 # This is mainly for error detection, since dbus (re-)starts dunst
498 # automatically after a crash.
499 startup_notification = false
500 # dmenu path
501 #dmenu = /usr/bin/dmenu -p dunst:
502 dmenu = /usr/bin/rofi -dmenu -p dunst:
503 # browser for opening urls in context menu
504 browser = /usr/bin/firefox -new-tab
505 [frame]
506 width = 0
507 color = "#377222"
508 [shortcuts]
509 # shortcuts are specified as [modifier+][modifier+]...key
510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511 # and 'mod4' (windows-key)
512 # xev might be helpful to find names for keys
513 # close notification
514 close = ctrl+space
515 # close all notifications
516 close_all = ctrl+shift+space
517 # redisplay last message(s)
518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519 history = ctrl+shift+h
520 # context menu
521 context = ctrl+shift+period
522 [urgency_low]
523 # IMPORTANT: colors have to be defined in quotation marks.
524 # Otherwise the '#' and following would be interpreted as a comment.
525 background = "#1d2a30"
526 foreground = "#71c2af"
527 timeout = 3
528 [urgency_normal]
529 background = "#1d2a30"
530 foreground = "#71c2af"
531 timeout = 0
532 [urgency_critical]
533 background = "#1d2a30"
534 foreground = "#ff9982"
535 timeout = 0
536
537 # Every section that isn't one of the above is interpreted as a rules
538 # to override settings for certain messages.
539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
541 # and 'format'.
542 # Shell-like globbing will get expanded.
543 #
544 # SCRIPTING
545 # you can specify a script that gets run when the rule matches by setting
546 # the 'script' option.
547 # The script will be called as follows:
548 # script appname summary body icon urgency
549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
550 #
551 # NOTE: if you don't want a notification to be displayed, set the format to ""
552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
553 # fitting options for rules.
554 #[espeak]
555 # summary = "*"
556 # script = dunst_espeak.sh
557 #[script-test]
558 # summary = "*script*"
559 # script = dunst_test.sh
560 #[ignore]
561 ## This notification will not be displayed
562 # summary = "foobar"
563 # format = ""
564 #[signed_on]
565 # appname = Pidgin
566 # summary = "*signed on*"
567 # urgency = low
568 #
569 #[signed_off]
570 # appname = Pidgin
571 # summary = *signed off*
572 # urgency = low
573 #
574 #[says]
575 # appname = Pidgin
576 # summary = *says*
577 # urgency = critical
578 #
579 #[twitter]
580 # appname = Pidgin
581 # summary = *twitter.com*
582 # urgency = normal
583 #
584 [xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587 #+end_src
588
589 ** Fontconfig
590 :PROPERTIES:
591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
592 :END:
593
594 #+begin_src xml
595 <?xml version="1.0"?>
596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597 <fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
628 <prefer>
629 <family>Liberation Sans</family>
630 </prefer>
631 </alias>
632 </fontconfig>
633 #+end_src
634
635 ** getmail
636
637 *** getmailrc
638 :PROPERTIES:
639 :header-args+: :tangle ~/.getmail/getmailrc
640 :END:
641
642 #+begin_src conf
643 [retriever]
644 type = SimplePOP3SSLRetriever
645 server = fencepost.gnu.org
646 username = bandali
647 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
648 port = 995
649 use_apop = True
650
651 [destination]
652 type = Maildir
653 path = ~/mail/gnu/Inbox/
654
655 [options]
656 delete = True
657 #+end_src
658
659 *** getmail.service
660 :PROPERTIES:
661 :header-args+: :tangle ~/.config/systemd/user/getmail.service
662 :END:
663
664 #+begin_src conf :tangle no
665 [Unit]
666 Description=getmail service
667
668 [Service]
669 Type=oneshot
670 ExecStart=/usr/bin/getmail
671 StandardOutput=syslog
672 StandardError=syslog
673 #+end_src
674
675 *** getmail.timer
676 :PROPERTIES:
677 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
678 :END:
679
680 #+begin_src conf :tangle no
681 [Unit]
682 Description=getmail timer
683
684 [Timer]
685 OnCalendar=*:0/30
686 Persistent=true
687 Unit=getmail.service
688
689 [Install]
690 WantedBy=timers.target
691 #+end_src
692
693 ** Git
694
695 *** gitconfig
696 :PROPERTIES:
697 :header-args+: :tangle ~/.gitconfig
698 :END:
699
700 **** user
701 #+begin_src conf
702 [user]
703 name = Amin Bandali
704 email = bandali@gnu.org
705 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
706 #+end_src
707
708 **** signing
709 #+begin_src conf
710 [commit]
711 gpgsign = true
712 # [format]
713 # signoff = true
714 #+end_src
715
716 **** core
717 #+begin_src conf
718 [core]
719 autocrlf = input # CRLF -> LF on commit
720 editor = emacsclient -t
721 excludesfile = ~/.gitignore_global
722 pager = "less"
723 #+end_src
724
725 **** gpg
726 #+begin_src conf
727 [gpg]
728 program = gpg2
729 #+end_src
730
731 **** alias
732 #+begin_src conf
733 [alias]
734 git = !exec git # handle nested git calls, e.g. git git status
735 aliases = config --get-regexp '^alias\\.'
736 a = add
737 s = status
738 sl = status --long
739 c = checkout
740 cb = checkout -b
741 b = branch
742 r = rebase
743 p = pull
744 pr = pull --rebase
745 ps = push
746 psf = push --force
747 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
748 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
749 #+end_src
750
751 **** color
752 #+begin_src conf
753 [color]
754 ui = auto
755 [color "status"]
756 added = green bold
757 changed = red bold
758 untracked = red bold
759 [color "branch"]
760 current = green bold
761 remote = magenta bold
762 [color "diff"]
763 new = green bold
764 old = red bold
765 #+end_src
766
767 **** status
768 #+begin_src conf
769 [status]
770 # showUntrackedFiles = all
771 short=true
772 branch=true
773 #+end_src
774
775 **** github
776 #+begin_src conf
777 [github]
778 user = aminb
779 #+end_src
780
781 **** send-email
782 #+begin_src conf
783 [sendemail]
784 smtpuser = bandali
785 smtpserver = fencepost.gnu.org
786 smtpserverport = 587
787 smtpencryption = tls
788 annotate = yes
789 #+end_src
790
791 *** gitignore
792 :PROPERTIES:
793 :header-args+: :tangle ~/.gitignore_global
794 :END:
795
796 #+begin_src conf
797 *.orig
798 *.py[co]
799 *.sublime-workspace
800 *~
801 .DS_Store
802 *.elc
803 *-autoloads.el
804 #+end_src
805
806 ** GnuPG
807 :PROPERTIES:
808 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
809 :END:
810
811 #+begin_src conf
812 default-cache-ttl 43200
813 max-cache-ttl 43200
814
815 default-cache-ttl-ssh 10800
816 max-cache-ttl-ssh 10800
817
818 # pinentry-program /usr/bin/pinentry-qt
819 #+end_src
820
821 ** GTK
822
823 *** gtk-2.0
824 :PROPERTIES:
825 :header-args+: :tangle ~/.gtkrc-2.0
826 :END:
827
828 #+begin_src conf
829 gtk-theme-name="Greybird"
830 gtk-icon-theme-name="Paper"
831 gtk-font-name="Ubuntu 10"
832 gtk-menu-images=0
833 # gtk-key-theme-name = "Emacs"
834 #+end_src
835
836 *** gtk-3.0
837 :PROPERTIES:
838 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
839 :END:
840
841 #+begin_src conf :tangle no
842 [Settings]
843 gtk-icon-theme-name = Paper
844 # gtk-theme-name = Adwaita
845
846 gtk-theme-name = Greybird
847 # gtk-theme-name = Arc-Darker
848 # gtk-theme-name = Numix-ArchBlue
849
850 gtk-font-name = Ubuntu 10
851 # gtk-key-theme-name = Emacs
852 #+end_src
853
854 ** [[https://github.com/Leinnan/i3gs][i3gs]]
855 :PROPERTIES:
856 :header-args+: :tangle ~/.config/i3gs/config
857 :END:
858
859 #+begin_src conf :comments none :tangle no
860 borders_width=0 0 2 0
861 separator_width=10
862
863 #[mpd]
864 #preset=MPD
865 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
866 #borders_color=#7FDBFF
867
868 [ram]
869 preset=RAM
870 title=<span weight='heavy' fgcolor='#3D9970'> </span>
871 borders_color=#3D9970
872
873 #[cpu]
874 #preset=CPU
875 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
876 #borders_color=#2ECC40
877
878 #[hdd]
879 #preset=HDD
880 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
881 #borders_color=#01FF70
882
883 [volume]
884 command=volume-info
885 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
886 borders_color=#7FDBFF
887
888 [battery]
889 preset=BAT
890 command=battery-percentage-time
891 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
892 borders_color=#39CCCC
893
894 [wifi]
895 preset=WIFI
896 title=<span weight='heavy' fgcolor='#01FF70'> </span>
897 borders_color=#01FF70
898
899 [date]
900 preset=DATE
901 command=date '+%-I:%M, %a %b %d '
902 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
903 borders_color=#FFDC00
904 separator_width=0
905 #+end_src
906
907 ** i3status
908 :PROPERTIES:
909 :header-args+: :tangle ~/.config/i3status/config
910 :END:
911
912 #+begin_src conf :comments none
913 # i3status configuration file.
914 # see "man i3status" for documentation.
915
916 # It is important that this file is edited as UTF-8.
917 # The following line should contain a sharp s:
918 # ß
919 # If the above line is not correctly displayed, fix your editor first!
920
921 general {
922 colors = true
923 interval = 5
924 output_format = "i3bar"
925 }
926
927 # order += "ipv6"
928 order += "disk /"
929 order += "disk /data"
930 order += "wireless _first_"
931 order += "ethernet _first_"
932 order += "battery 0"
933 order += "volume master"
934 order += "load"
935 order += "tztime local"
936
937 wireless _first_ {
938 format_up = "W:%quality %essid %ip"
939 format_down = "W: down"
940 }
941
942 ethernet _first_ {
943 # if you use %speed, i3status requires root privileges
944 format_up = "E: %ip (%speed)"
945 format_down = "E: down"
946 }
947
948 battery 0 {
949 format = "%status %percentage %remaining (%consumption)"
950 path = "/sys/class/power_supply/BAT%d/uevent"
951 low_threshold = "10"
952 threshold_type = "percentage"
953 last_full_capacity = true
954 integer_battery_capacity = true
955 hide_seconds = true
956 }
957
958 tztime local {
959 format = "%-I:%M%P %a %b %d"
960 }
961
962 volume master {
963 format = "♪ %volume"
964 format_muted = "🔇 %volume"
965 device = "pulse"
966 }
967
968 load {
969 format = "%1min"
970 }
971
972 disk "/" {
973 format = "/ %avail"
974 }
975
976 disk "/data" {
977 format = "/data %avail"
978 }
979 #+end_src
980
981 ** isync
982
983 *** mbsyncrc
984 :PROPERTIES:
985 :header-args+: :tangle ~/.mbsyncrc
986 :END:
987
988 #+begin_src conf
989 # Global defaults
990 CopyArrivalDate yes
991
992 ######
993 IMAPAccount amin
994 Host nix.aminb.org
995 User amin@aminb.org
996 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
997 SSLType IMAPS
998
999 IMAPStore amin-remote
1000 Account amin
1001
1002 MaildirStore amin-local
1003 Path ~/mail/amin/
1004 Inbox ~/mail/amin/Inbox
1005 SubFolders Verbatim
1006
1007 Channel amin
1008 Master :amin-remote:
1009 Slave :amin-local:
1010 Patterns * !dovecot*
1011 Create Both
1012 SyncState *
1013
1014 ######
1015 IMAPAccount uwaterloo
1016 Host connect.uwaterloo.ca
1017 User abandali
1018 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1019 SSLType IMAPS
1020
1021 IMAPStore uwaterloo-remote
1022 Account uwaterloo
1023
1024 MaildirStore uwaterloo-local
1025 Path ~/mail/uwaterloo/
1026 Inbox ~/mail/uwaterloo/Inbox
1027 SubFolders Verbatim
1028
1029 Channel uwaterloo
1030 Master :uwaterloo-remote:
1031 Slave :uwaterloo-local:
1032 Patterns * !dovecot*
1033 Create Both
1034 SyncState *
1035 #+end_src
1036
1037 *** mbsync.service
1038 :PROPERTIES:
1039 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1040 :END:
1041
1042 #+begin_src conf :tangle no
1043 [Unit]
1044 Description=mbsync service
1045
1046 [Service]
1047 Type=oneshot
1048 ExecStart=/usr/bin/mbsync -Va
1049 StandardOutput=syslog
1050 StandardError=syslog
1051 #+end_src
1052
1053 *** mbsync.timer
1054 :PROPERTIES:
1055 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1056 :END:
1057
1058 #+begin_src conf :tangle no
1059 [Unit]
1060 Description=mbsync timer
1061
1062 [Timer]
1063 OnCalendar=*:0/15
1064 Persistent=true
1065 Unit=mbsync.service
1066
1067 [Install]
1068 WantedBy=timers.target
1069 #+end_src
1070
1071 ** Latexmk
1072 :PROPERTIES:
1073 :header-args+: :tangle ~/.latexmkrc
1074 :END:
1075
1076 #+begin_src conf
1077 $pdf_previewer = "start zathura %O %S";
1078 $clean_ext = "aux out";
1079
1080 # $pdf_update_method = 4;
1081 # $pdf_update_command = "zathura %O %S";
1082
1083 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1084 # by Ctrl+click in the PDF.
1085 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1086 # editor.
1087 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1088 #+end_src
1089
1090 ** libinput
1091
1092 Improve XPS 15 9560's touchpad experience.
1093
1094 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1095 #+begin_src conf :tangle no
1096 Section "InputClass"
1097 Identifier "libinput touchpad catchall"
1098 Driver "libinput"
1099 MatchIsTouchpad "on"
1100 Option "ClickMethod" "clickfinger"
1101 Option "NaturalScrolling" "true"
1102 Option "Tapping" "on"
1103 Option "TappingButtonMap" "lrm"
1104 EndSection
1105 #+end_src
1106
1107 ** mpd
1108 :PROPERTIES:
1109 :header-args+: :tangle ~/.config/mpd/mpd.conf
1110 :END:
1111
1112 #+begin_src conf
1113 # An example configuration file for MPD.
1114 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1115
1116
1117 # Files and directories #######################################################
1118 #
1119 # This setting controls the top directory which MPD will search to discover the
1120 # available audio files and add them to the daemon's online database. This
1121 # setting defaults to the XDG directory, otherwise the music directory will be
1122 # be disabled and audio files will only be accepted over ipc socket (using
1123 # file:// protocol) or streaming files over an accepted protocol.
1124 #
1125 music_directory "~/usr/music"
1126 #
1127 # This setting sets the MPD internal playlist directory. The purpose of this
1128 # directory is storage for playlists created by MPD. The server will use
1129 # playlist files not created by the server but only if they are in the MPD
1130 # format. This setting defaults to playlist saving being disabled.
1131 #
1132 playlist_directory "~/.mpd/playlists"
1133 #
1134 # This setting sets the location of the MPD database. This file is used to
1135 # load the database at server start up and store the database while the
1136 # server is not up. This setting defaults to disabled which will allow
1137 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1138 # files over an accepted protocol.
1139 #
1140 db_file "~/.mpd/database"
1141 #
1142 # These settings are the locations for the daemon log files for the daemon.
1143 # These logs are great for troubleshooting, depending on your log_level
1144 # settings.
1145 #
1146 # The special value "syslog" makes MPD use the local syslog daemon. This
1147 # setting defaults to logging to syslog, otherwise logging is disabled.
1148 #
1149 log_file "~/.mpd/log"
1150 #
1151 # This setting sets the location of the file which stores the process ID
1152 # for use of mpd --kill and some init scripts. This setting is disabled by
1153 # default and the pid file will not be stored.
1154 #
1155 pid_file "~/.mpd/pid"
1156 #
1157 # This setting sets the location of the file which contains information about
1158 # most variables to get MPD back into the same general shape it was in before
1159 # it was brought down. This setting is disabled by default and the server
1160 # state will be reset on server start up.
1161 #
1162 state_file "~/.mpd/state"
1163 #
1164 # The location of the sticker database. This is a database which
1165 # manages dynamic information attached to songs.
1166 #
1167 sticker_file "~/.mpd/sticker.sql"
1168 #
1169 ###############################################################################
1170
1171
1172 # General music daemon options ################################################
1173 #
1174 # This setting specifies the user that MPD will run as. MPD should never run as
1175 # root and you may use this setting to make MPD change its user ID after
1176 # initialization. This setting is disabled by default and MPD is run as the
1177 # current user.
1178 #
1179 #user "nobody"
1180 #
1181 # This setting specifies the group that MPD will run as. If not specified
1182 # primary group of user specified with "user" setting will be used (if set).
1183 # This is useful if MPD needs to be a member of group such as "audio" to
1184 # have permission to use sound card.
1185 #
1186 #group "nogroup"
1187 #
1188 # This setting sets the address for the daemon to listen on. Careful attention
1189 # should be paid if this is assigned to anything other then the default, any.
1190 # This setting can deny access to control of the daemon. Not effective if
1191 # systemd socket activiation is in use.
1192 #
1193 # For network
1194 #bind_to_address "any"
1195 #
1196 # And for Unix Socket
1197 #bind_to_address "~/.mpd/socket"
1198 #
1199 # This setting is the TCP port that is desired for the daemon to get assigned
1200 # to.
1201 #
1202 #port "6600"
1203 #
1204 # This setting controls the type of information which is logged. Available
1205 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1206 # argument is recommended for troubleshooting, though can quickly stretch
1207 # available resources on limited hardware storage.
1208 #
1209 #log_level "default"
1210 #
1211 # If you have a problem with your MP3s ending abruptly it is recommended that
1212 # you set this argument to "no" to attempt to fix the problem. If this solves
1213 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1214 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1215 # point gapless MP3 playback can be enabled.
1216 #
1217 #gapless_mp3_playback "yes"
1218 #
1219 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1220 # of starting playback after startup.
1221 #
1222 #restore_paused "no"
1223 #
1224 # This setting enables MPD to create playlists in a format usable by other
1225 # music players.
1226 #
1227 #save_absolute_paths_in_playlists "no"
1228 #
1229 # This setting defines a list of tag types that will be extracted during the
1230 # audio file discovery process. The complete list of possible values can be
1231 # found in the user manual.
1232 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1233 #
1234 # This setting enables automatic update of MPD's database when files in
1235 # music_directory are changed.
1236 #
1237 #auto_update "yes"
1238 #
1239 # Limit the depth of the directories being watched, 0 means only watch
1240 # the music directory itself. There is no limit by default.
1241 #
1242 #auto_update_depth "3"
1243 #
1244 ###############################################################################
1245
1246
1247 # Symbolic link behavior ######################################################
1248 #
1249 # If this setting is set to "yes", MPD will discover audio files by following
1250 # symbolic links outside of the configured music_directory.
1251 #
1252 #follow_outside_symlinks "yes"
1253 #
1254 # If this setting is set to "yes", MPD will discover audio files by following
1255 # symbolic links inside of the configured music_directory.
1256 #
1257 #follow_inside_symlinks "yes"
1258 #
1259 ###############################################################################
1260
1261
1262 # Zeroconf / Avahi Service Discovery ##########################################
1263 #
1264 # If this setting is set to "yes", service information will be published with
1265 # Zeroconf / Avahi.
1266 #
1267 #zeroconf_enabled "yes"
1268 #
1269 # The argument to this setting will be the Zeroconf / Avahi unique name for
1270 # this MPD server on the network.
1271 #
1272 #zeroconf_name "Music Player"
1273 #
1274 ###############################################################################
1275
1276
1277 # Permissions #################################################################
1278 #
1279 # If this setting is set, MPD will require password authorization. The password
1280 # setting can be specified multiple times for different password profiles.
1281 #
1282 #password "password@read,add,control,admin"
1283 #
1284 # This setting specifies the permissions a user has who has not yet logged in.
1285 #
1286 #default_permissions "read,add,control,admin"
1287 #
1288 ###############################################################################
1289
1290
1291 # Database #######################################################################
1292 #
1293
1294 #database {
1295 # plugin "proxy"
1296 # host "other.mpd.host"
1297 # port "6600"
1298 #}
1299
1300 # Input #######################################################################
1301 #
1302
1303 input {
1304 plugin "curl"
1305 # proxy "proxy.isp.com:8080"
1306 # proxy_user "user"
1307 # proxy_password "password"
1308 }
1309
1310 #
1311 ###############################################################################
1312
1313 # Audio Output ################################################################
1314 #
1315
1316 audio_output {
1317 type "pulse"
1318 name "pulse audio"
1319 }
1320
1321 audio_output {
1322 type "fifo"
1323 name "my_fifo"
1324 path "/tmp/mpd.fifo"
1325 format "44100:16:2"
1326 }
1327
1328 # MPD supports various audio output types, as well as playing through multiple
1329 # audio outputs at the same time, through multiple audio_output settings
1330 # blocks. Setting this block is optional, though the server will only attempt
1331 # autodetection for one sound card.
1332 #
1333 # An example of an ALSA output:
1334 #
1335 #audio_output {
1336 # type "alsa"
1337 # name "My ALSA Device"
1338 ## device "hw:0,0" # optional
1339 ## mixer_type "hardware" # optional
1340 ## mixer_device "default" # optional
1341 ## mixer_control "PCM" # optional
1342 ## mixer_index "0" # optional
1343 #}
1344 #
1345 # An example of an OSS output:
1346 #
1347 #audio_output {
1348 # type "oss"
1349 # name "My OSS Device"
1350 ## device "/dev/dsp" # optional
1351 ## mixer_type "hardware" # optional
1352 ## mixer_device "/dev/mixer" # optional
1353 ## mixer_control "PCM" # optional
1354 #}
1355 #
1356 # An example of a shout output (for streaming to Icecast):
1357 #
1358 #audio_output {
1359 # type "shout"
1360 # encoder "vorbis" # optional
1361 # name "My Shout Stream"
1362 # host "localhost"
1363 # port "8000"
1364 # mount "/mpd.ogg"
1365 # password "hackme"
1366 # quality "5.0"
1367 # bitrate "128"
1368 # format "44100:16:1"
1369 ## protocol "icecast2" # optional
1370 ## user "source" # optional
1371 ## description "My Stream Description" # optional
1372 ## url "http://example.com" # optional
1373 ## genre "jazz" # optional
1374 ## public "no" # optional
1375 ## timeout "2" # optional
1376 ## mixer_type "software" # optional
1377 #}
1378 #
1379 # An example of a recorder output:
1380 #
1381 #audio_output {
1382 # type "recorder"
1383 # name "My recorder"
1384 # encoder "vorbis" # optional, vorbis or lame
1385 # path "/var/lib/mpd/recorder/mpd.ogg"
1386 ## quality "5.0" # do not define if bitrate is defined
1387 # bitrate "128" # do not define if quality is defined
1388 # format "44100:16:1"
1389 #}
1390 #
1391 # An example of a httpd output (built-in HTTP streaming server):
1392 #
1393 #audio_output {
1394 # type "httpd"
1395 # name "My HTTP Stream"
1396 # encoder "vorbis" # optional, vorbis or lame
1397 # port "8000"
1398 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1399 ## quality "5.0" # do not define if bitrate is defined
1400 # bitrate "128" # do not define if quality is defined
1401 # format "44100:16:1"
1402 # max_clients "0" # optional 0=no limit
1403 #}
1404 #
1405 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1406 #
1407 #audio_output {
1408 # type "pulse"
1409 # name "My Pulse Output"
1410 ## server "remote_server" # optional
1411 ## sink "remote_server_sink" # optional
1412 #}
1413 #
1414 # An example of a winmm output (Windows multimedia API).
1415 #
1416 #audio_output {
1417 # type "winmm"
1418 # name "My WinMM output"
1419 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1420 # or
1421 ## device "0" # optional
1422 ## mixer_type "hardware" # optional
1423 #}
1424 #
1425 # An example of an openal output.
1426 #
1427 #audio_output {
1428 # type "openal"
1429 # name "My OpenAL output"
1430 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1431 #}
1432 #
1433 # An example of an sndio output.
1434 #
1435 #audio_output {
1436 # type "sndio"
1437 # name "sndio output"
1438 # mixer_type "software"
1439 #}
1440 #
1441 # An example of an OS X output:
1442 #
1443 #audio_output {
1444 # type "osx"
1445 # name "My OS X Device"
1446 ## device "Built-in Output" # optional
1447 ## channel_map "-1,-1,0,1" # optional
1448 #}
1449 #
1450 ## Example "pipe" output:
1451 #
1452 #audio_output {
1453 # type "pipe"
1454 # name "my pipe"
1455 # command "aplay -f cd 2>/dev/null"
1456 ## Or if you're want to use AudioCompress
1457 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1458 ## Or to send raw PCM stream through PCM:
1459 # command "nc example.org 8765"
1460 # format "44100:16:2"
1461 #}
1462 #
1463 ## An example of a null output (for no audio output):
1464 #
1465 #audio_output {
1466 # type "null"
1467 # name "My Null Output"
1468 # mixer_type "none" # optional
1469 #}
1470 #
1471 ###############################################################################
1472
1473
1474 # Normalization automatic volume adjustments ##################################
1475 #
1476 # This setting specifies the type of ReplayGain to use. This setting can have
1477 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1478 # chooses between "track" and "album" depending on the current state of
1479 # random playback. If random playback is enabled then "track" mode is used.
1480 # See <http://www.replaygain.org> for more details about ReplayGain.
1481 # This setting is off by default.
1482 #
1483 #replaygain "album"
1484 #
1485 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1486 # default this setting is disabled.
1487 #
1488 #replaygain_preamp "0"
1489 #
1490 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1491 # By default this setting is disabled.
1492 #
1493 #replaygain_missing_preamp "0"
1494 #
1495 # This setting enables or disables ReplayGain limiting.
1496 # MPD calculates actual amplification based on the ReplayGain tags
1497 # and replaygain_preamp / replaygain_missing_preamp setting.
1498 # If replaygain_limit is enabled MPD will never amplify audio signal
1499 # above its original level. If replaygain_limit is disabled such amplification
1500 # might occur. By default this setting is enabled.
1501 #
1502 #replaygain_limit "yes"
1503 #
1504 # This setting enables on-the-fly normalization volume adjustment. This will
1505 # result in the volume of all playing audio to be adjusted so the output has
1506 # equal "loudness". This setting is disabled by default.
1507 #
1508 #volume_normalization "no"
1509 #
1510 ###############################################################################
1511
1512 # Character Encoding ##########################################################
1513 #
1514 # If file or directory names do not display correctly for your locale then you
1515 # may need to modify this setting.
1516 #
1517 #filesystem_charset "UTF-8"
1518 #
1519 ###############################################################################
1520 #+end_src
1521
1522 ** msmtp
1523 :PROPERTIES:
1524 :header-args+: :tangle ~/.msmtprc
1525 :END:
1526
1527 #+begin_src conf
1528 # Set default values for all following accounts.
1529 defaults
1530 port 587
1531 tls on
1532 auth on
1533 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1534 logfile ~/.msmtp.log
1535
1536 # aminb
1537 account aminb
1538 host nix.aminb.org
1539 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1540 tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
1541 tls_starttls on
1542 from amin@aminb.org
1543 user amin@aminb.org
1544 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1545
1546 # gnu
1547 account gnu
1548 host fencepost.gnu.org
1549 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1550 tls_fingerprint 34:60:91:B5:71:5B:76:87:50:F3:83:13:26:0F:EE:75:42:83:93:9A:E2:AF:1E:87:72:02:C9:61:CE:28:1B:8E
1551 tls_starttls on
1552 from bandali@gnu.org
1553 user bandali
1554 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1555
1556 # gnu (old)
1557 account gnu-aminb : gnu
1558 from aminb@gnu.org
1559 account gnu-amin : gnu
1560 from amin@gnu.org
1561 account gnu-mab : gnu
1562 from mab@gnu.org
1563
1564 # uwaterloo
1565 account uwaterloo
1566 host connect.uwaterloo.ca
1567 tls_starttls on
1568 from abandali@uwaterloo.ca
1569 user abandali
1570 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1571 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1572
1573 # Set a default account
1574 account default : aminb
1575 #+end_src
1576
1577 ** ncmpcpp
1578
1579 *** config
1580 :PROPERTIES:
1581 :header-args+: :tangle ~/.ncmpcpp/config
1582 :END:
1583
1584 #+begin_src conf :tangle no
1585 ##############################################################
1586 ## This is the example configuration file. Copy it to ##
1587 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1588 ## and set up your preferences. ##
1589 ##############################################################
1590 #
1591 ##### directories ######
1592 ##
1593 ## Directory for storing ncmpcpp related files.
1594 ## Changing it is useful if you want to store
1595 ## everything somewhere else and provide command
1596 ## line setting for alternative location to config
1597 ## file which defines that while launching ncmpcpp.
1598 ##
1599 #
1600 ncmpcpp_directory = ~/.ncmpcpp
1601 #
1602 ##
1603 ## Directory for storing downloaded lyrics. It
1604 ## defaults to ~/.lyrics since other MPD clients
1605 ## (eg. ncmpc) also use that location.
1606 ##
1607 #
1608 #lyrics_directory = ~/.lyrics
1609 #
1610 ##### connection settings #####
1611 #
1612 #mpd_host = localhost
1613 #
1614 #mpd_port = 6600
1615 #
1616 #mpd_connection_timeout = 5
1617 #
1618 ## Needed for tag editor and file operations to work.
1619 ##
1620 mpd_music_dir = ~/usr/music
1621 #
1622 #mpd_crossfade_time = 5
1623 #
1624 ##### music visualizer #####
1625 ##
1626 ## Note: In order to make music visualizer work you'll
1627 ## need to use mpd fifo output, whose format parameter
1628 ## has to be set to 44100:16:1 for mono visualization
1629 ## or 44100:16:2 for stereo visualization. Example
1630 ## configuration (it has to be put into mpd.conf):
1631 ##
1632 ## audio_output {
1633 ## type "fifo"
1634 ## name "Visualizer feed"
1635 ## path "/tmp/mpd.fifo"
1636 ## format "44100:16:2"
1637 ## }
1638 ##
1639 #
1640 visualizer_fifo_path = /tmp/mpd.fifo
1641 #
1642 ##
1643 ## Note: Below parameter is needed for ncmpcpp
1644 ## to determine which output provides data for
1645 ## visualizer and thus allow syncing between
1646 ## visualization and sound as currently there
1647 ## are some problems with it.
1648 ##
1649 #
1650 visualizer_output_name = my fifo
1651 #
1652 ##
1653 ## If you set format to 44100:16:2, make it 'yes'.
1654 ##
1655 visualizer_in_stereo = yes
1656 #
1657 ##
1658 ## Multiply received samples by given value. Very
1659 ## useful for proper visualization of quiet music.
1660 ##
1661 #visualizer_sample_multiplier = 1
1662 #
1663 ##
1664 ## Note: Below parameter defines how often ncmpcpp
1665 ## has to "synchronize" visualizer and audio outputs.
1666 ## 30 seconds is optimal value, but if you experience
1667 ## synchronization problems, set it to lower value.
1668 ## Keep in mind that sane values start with >=10.
1669 ##
1670 #
1671 visualizer_sync_interval = 30
1672 #
1673 ##
1674 ## Note: To enable spectrum frequency visualization
1675 ## you need to compile ncmpcpp with fftw3 support.
1676 ##
1677 #
1678 ## Available values: spectrum, wave, wave_filled, ellipse.
1679 ##
1680 visualizer_type = spectrum
1681 #
1682 #visualizer_look = ●▮
1683 visualizer_look = "●•"
1684 #
1685 #visualizer_color = blue, cyan, green, yellow, magenta, red
1686 #
1687 ## Alternative subset of 256 colors for terminals that support it.
1688 ##
1689 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1690 #
1691 ##### system encoding #####
1692 ##
1693 ## ncmpcpp should detect your charset encoding
1694 ## but if it failed to do so, you can specify
1695 ## charset encoding you are using here.
1696 ##
1697 ## Note: You can see whether your ncmpcpp build
1698 ## supports charset detection by checking output
1699 ## of `ncmpcpp --version`.
1700 ##
1701 ## Note: Since MPD uses UTF-8 by default, setting
1702 ## this option makes sense only if your encoding
1703 ## is different.
1704 ##
1705 #
1706 #system_encoding = ""
1707 #
1708 ##### delays #####
1709 #
1710 ## Time of inactivity (in seconds) after playlist
1711 ## highlighting will be disabled (0 = always on).
1712 ##
1713 #playlist_disable_highlight_delay = 5
1714 #
1715 ## Defines how long messages are supposed to be visible.
1716 ##
1717 #message_delay_time = 5
1718 #
1719 ##### song format #####
1720 ##
1721 ## For a song format you can use:
1722 ##
1723 ## %l - length
1724 ## %f - filename
1725 ## %D - directory
1726 ## %a - artist
1727 ## %A - album artist
1728 ## %t - title
1729 ## %b - album
1730 ## %y - date
1731 ## %n - track number (01/12 -> 01)
1732 ## %N - full track info (01/12 -> 01/12)
1733 ## %g - genre
1734 ## %c - composer
1735 ## %p - performer
1736 ## %d - disc
1737 ## %C - comment
1738 ## %P - priority
1739 ## $R - begin right alignment
1740 ##
1741 ## If you want to make sure that a part of the format is displayed
1742 ## only when certain tags are present, you can archieve it by
1743 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1744 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1745 ## It is also possible to define a list of alternatives by providing
1746 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1747 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1748 ## present.
1749 ##
1750 ## Note: If you want to set limit on maximal length of a tag, just
1751 ## put the appropriate number between % and character that defines
1752 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1753 ##
1754 ## In addition, formats support markers used for text attributes.
1755 ## They are followed by character '$'. After that you can put:
1756 ##
1757 ## - 0 - default window color (discards all other colors)
1758 ## - 1 - black
1759 ## - 2 - red
1760 ## - 3 - green
1761 ## - 4 - yellow
1762 ## - 5 - blue
1763 ## - 6 - magenta
1764 ## - 7 - cyan
1765 ## - 8 - white
1766 ## - 9 - end of current color
1767 ## - b - bold text
1768 ## - u - underline text
1769 ## - r - reverse colors
1770 ## - a - use alternative character set
1771 ##
1772 ## If you don't want to use a non-color attribute anymore, just put it
1773 ## again, but this time insert character '/' between '$' and attribute
1774 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1775 ## or filename with reversed colors.
1776 ##
1777 ## If you want to use 256 colors and/or background colors in formats
1778 ## (the naming scheme is described below in section about color
1779 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1780 ## the artist tag to one of the non-standard colors and make it have
1781 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1782 ## that for standard colors this is interchangable with attributes
1783 ## listed above.
1784 ##
1785 ## Note: colors can be nested.
1786 ##
1787 #
1788 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1789 #
1790 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1791 #
1792 #song_library_format = {%n - }{%t}|{%f}
1793 #
1794 #
1795 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1796 #
1797 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1798 #
1799 #now_playing_prefix = $b
1800 #
1801 #now_playing_suffix = $/b
1802 #
1803 #browser_playlist_prefix = "$2playlist$9 "
1804 #
1805 #selected_item_prefix = $6
1806 #
1807 #selected_item_suffix = $9
1808 #
1809 #modified_item_prefix = $3> $9
1810 #
1811 ##
1812 ## Note: attributes are not supported for the following variables.
1813 ##
1814 #song_window_title_format = {%a - }{%t}|{%f}
1815 ##
1816 ## Note: Below variables are used for sorting songs in browser.
1817 ## The sort mode determines how songs are sorted, and can be used
1818 ## in combination with a sort format to specify a custom sorting format.
1819 ## Available values for browser_sort_mode are "name", "mtime", "format"
1820 ## and "noop".
1821 ##
1822 #
1823 #browser_sort_mode = name
1824 #
1825 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1826 #
1827 ##### columns settings #####
1828 ##
1829 ## syntax of song columns list format is "column column etc."
1830 ##
1831 ## - syntax for each column is:
1832 ##
1833 ## (width of the column)[color of the column]{displayed tag}
1834 ##
1835 ## Note: Width is by default in %, if you want a column to
1836 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1837 ## will be the column that take 10% of screen (so the real width
1838 ## will depend on actual screen size), whereas (10f)[white]{a}
1839 ## will take 10 terminal cells, no matter how wide the screen is.
1840 ##
1841 ## - color is optional (if you want the default one,
1842 ## leave the field empty).
1843 ##
1844 ## Note: You can give a column additional attributes by putting appropriate
1845 ## character after displayed tag character. Available attributes are:
1846 ##
1847 ## - r - column will be right aligned
1848 ## - E - if tag is empty, empty tag marker won't be displayed
1849 ##
1850 ## You can also:
1851 ##
1852 ## - give a column custom name by putting it after attributes,
1853 ## separated with character ':', e.g. {lr:Length} gives you
1854 ## right aligned column of lengths named "Length".
1855 ##
1856 ## - define sequence of tags, that have to be displayed in case
1857 ## predecessor is empty in a way similar to the one in classic
1858 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1859 ## creates column named "Owner" that tries to display artist
1860 ## tag and then composer and performer if previous ones are
1861 ## not available.
1862 ##
1863 #
1864 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1865 #
1866 ##### various settings #####
1867 #
1868 ##
1869 ## Note: Custom command that will be executed each
1870 ## time song changes. Useful for notifications etc.
1871 ##
1872 #execute_on_song_change = ""
1873 #
1874 #playlist_show_mpd_host = no
1875 #
1876 #playlist_show_remaining_time = no
1877 #
1878 #playlist_shorten_total_times = no
1879 #
1880 #playlist_separate_albums = no
1881 #
1882 ##
1883 ## Note: Possible display modes: classic, columns.
1884 ##
1885 #playlist_display_mode = columns
1886 #
1887 #browser_display_mode = classic
1888 #
1889 #search_engine_display_mode = classic
1890 #
1891 #playlist_editor_display_mode = classic
1892 #
1893 #discard_colors_if_item_is_selected = yes
1894 #
1895 #incremental_seeking = yes
1896 #
1897 #seek_time = 1
1898 #
1899 #volume_change_step = 2
1900 #
1901 #autocenter_mode = no
1902 #
1903 #centered_cursor = no
1904 #
1905 ##
1906 ## Note: You can specify third character which will
1907 ## be used to build 'empty' part of progressbar.
1908 ##
1909 #progressbar_look = =>
1910 progressbar_look = "─╼╶"
1911 #progressbar_look = "─⊙╶"
1912 #
1913 #progressbar_boldness = yes
1914 #
1915 ## Available values: database, playlist.
1916 ##
1917 #default_place_to_search_in = database
1918 #
1919 ## Available values: classic, alternative.
1920 ##
1921 #user_interface = classic
1922 #
1923 #data_fetching_delay = yes
1924 #
1925 ## Available values: artist, album_artist, date, genre, composer, performer.
1926 ##
1927 #media_library_primary_tag = artist
1928 #
1929 ## Available values: wrapped, normal.
1930 ##
1931 #default_find_mode = wrapped
1932 #
1933 #default_tag_editor_pattern = %n - %t
1934 #
1935 #header_visibility = yes
1936 #
1937 #statusbar_visibility = yes
1938 #
1939 #titles_visibility = yes
1940 #
1941 #header_text_scrolling = yes
1942 #
1943 #cyclic_scrolling = no
1944 #
1945 #lines_scrolled = 2
1946 #
1947 #follow_now_playing_lyrics = no
1948 #
1949 #fetch_lyrics_for_current_song_in_background = no
1950 #
1951 #store_lyrics_in_song_dir = no
1952 #
1953 #generate_win32_compatible_filenames = yes
1954 #
1955 #allow_for_physical_item_deletion = no
1956 #
1957 ##
1958 ## Note: If you set this variable, ncmpcpp will try to
1959 ## get info from last.fm in language you set and if it
1960 ## fails, it will fall back to english. Otherwise it will
1961 ## use english the first time.
1962 ##
1963 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1964 ##
1965 #lastfm_preferred_language = en
1966 #
1967 #show_hidden_files_in_local_browser = no
1968 #
1969 ##
1970 ## How shall screen switcher work?
1971 ##
1972 ## - "previous" - switch between the current and previous screen.
1973 ## - "screen1,...,screenN" - switch between given sequence of screens.
1974 ##
1975 ## Screens available for use: help, playlist, browser, search_engine,
1976 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1977 ##
1978 #screen_switcher_mode = playlist, browser
1979 #
1980 ##
1981 ## Note: You can define startup screen
1982 ## by choosing screen from the list above.
1983 ##
1984 #startup_screen = playlist
1985 #
1986 ##
1987 ## Note: You can define startup slave screen
1988 ## by choosing screen from the list above or
1989 ## an empty value for no slave screen.
1990 ##
1991 #startup_slave_screen = ""
1992 #
1993 #startup_slave_screen_focus = no
1994 #
1995 ##
1996 ## Default width of locked screen (in %).
1997 ## Acceptable values are from 20 to 80.
1998 ##
1999 #
2000 #locked_screen_width_part = 50
2001 #
2002 #ask_for_locked_screen_width_part = yes
2003 #
2004 #jump_to_now_playing_song_at_start = yes
2005 #
2006 #ask_before_clearing_playlists = yes
2007 #
2008 #clock_display_seconds = no
2009 #
2010 #display_volume_level = yes
2011 #
2012 #display_bitrate = no
2013 #
2014 #display_remaining_time = no
2015 #
2016 ## Available values: none, basic, extended, perl.
2017 ##
2018 #regular_expressions = perl
2019 #
2020 ##
2021 ## Note: If below is enabled, ncmpcpp will ignore leading
2022 ## "The" word while sorting items in browser, tags in
2023 ## media library, etc.
2024 ##
2025 #ignore_leading_the = no
2026 #
2027 #block_search_constraints_change_if_items_found = yes
2028 #
2029 #mouse_support = yes
2030 #
2031 #mouse_list_scroll_whole_page = yes
2032 #
2033 #empty_tag_marker = <empty>
2034 #
2035 #tags_separator = " | "
2036 #
2037 #tag_editor_extended_numeration = no
2038 #
2039 #media_library_sort_by_mtime = no
2040 #
2041 #enable_window_title = yes
2042 #
2043 ##
2044 ## Note: You can choose default search mode for search
2045 ## engine. Available modes are:
2046 ##
2047 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2048 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2049 ## but if your mpd is on a remote machine, downloading big database
2050 ## to process it can take a while
2051 ## - 3 - match only exact values (this mode uses mpd function for searching
2052 ## in database and local one for searching in current playlist)
2053 ##
2054 #
2055 #search_engine_default_search_mode = 1
2056 #
2057 #external_editor = nano
2058 #
2059 ## Note: set to yes if external editor is a console application.
2060 ##
2061 #use_console_editor = yes
2062 #
2063 ##### colors definitions #####
2064 ##
2065 ## It is possible to set a background color by setting a color
2066 ## value "<foreground>_<background>", e.g. red_black will set
2067 ## foregound color to red and background color to black.
2068 ##
2069 ## In addition, for terminals that support 256 colors it
2070 ## is possible to set one of them by using a number in range
2071 ## [1, 256] instead of color name, e.g. numerical value
2072 ## corresponding to red_black is 2_1. To find out if the
2073 ## terminal supports 256 colors, run ncmpcpp and check out
2074 ## the bottom of the help screen for list of available colors
2075 ## and their numerical values.
2076 ##
2077 ## Note: due to technical limitations of ncurses, if 256 colors
2078 ## are used, it is possible to either use only the colors with
2079 ## default background color, or all pairs from 1_1 up to 254_127,
2080 ## depending on the ncurses version used.
2081 ##
2082 #
2083 #colors_enabled = yes
2084 #
2085 #empty_tag_color = cyan
2086 #
2087 #header_window_color = default
2088 #
2089 #volume_color = default
2090 #
2091 #state_line_color = default
2092 #
2093 #state_flags_color = default
2094 #
2095 #main_window_color = yellow
2096 #
2097 #color1 = white
2098 #
2099 #color2 = green
2100 #
2101 #main_window_highlight_color = yellow
2102 #
2103 #progressbar_color = black
2104 #
2105 #progressbar_elapsed_color = green
2106 #
2107 #statusbar_color = default
2108 #
2109 #alternative_ui_separator_color = black
2110 #
2111 #active_column_color = red
2112 #
2113 #window_border_color = green
2114 #
2115 #active_window_border = red
2116 #
2117 #+end_src
2118
2119 *** bindings
2120 :PROPERTIES:
2121 :header-args+: :tangle ~/.ncmpcpp/bindings
2122 :END:
2123
2124 #+begin_src conf :tangle no
2125 def_key "j"
2126 scroll_down
2127 def_key "k"
2128 scroll_up
2129
2130 def_key "ctrl-u"
2131 page_up
2132 def_key "ctrl-d"
2133 page_down
2134
2135 def_key "h"
2136 previous_column
2137 def_key "l"
2138 next_column
2139
2140 def_key "."
2141 show_lyrics
2142
2143 def_key "n"
2144 next_found_item
2145 def_key "N"
2146 previous_found_item
2147
2148 def_key "J"
2149 move_sort_order_down
2150 def_key "K"
2151 move_sort_order_up
2152 #+end_src
2153
2154 ** notmuch
2155
2156 *** notmuch-config
2157 :PROPERTIES:
2158 :header-args+: :tangle ~/.notmuch-config
2159 :END:
2160
2161 #+begin_src conf
2162 # .notmuch-config - Configuration file for the notmuch mail system
2163 #
2164 # For more information about notmuch, see https://notmuchmail.org
2165
2166 # Database configuration
2167 #
2168 # The only value supported here is 'path' which should be the top-level
2169 # directory where your mail currently exists and to where mail will be
2170 # delivered in the future. Files should be individual email messages.
2171 # Notmuch will store its database within a sub-directory of the path
2172 # configured here named ".notmuch".
2173 #
2174 [database]
2175 path=/home/amin/mail
2176
2177 # User configuration
2178 #
2179 # Here is where you can let notmuch know how you would like to be
2180 # addressed. Valid settings are
2181 #
2182 # name Your full name.
2183 # primary_email Your primary email address.
2184 # other_email A list (separated by ';') of other email addresses
2185 # at which you receive email.
2186 #
2187 # Notmuch will use the various email addresses configured here when
2188 # formatting replies. It will avoid including your own addresses in the
2189 # recipient list of replies, and will set the From address based on the
2190 # address to which the original email was addressed.
2191 #
2192 [user]
2193 name=Amin Bandali
2194 primary_email=amin@aminb.org
2195 other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2196
2197 # Configuration for "notmuch new"
2198 #
2199 # The following options are supported here:
2200 #
2201 # tags A list (separated by ';') of the tags that will be
2202 # added to all messages incorporated by "notmuch new".
2203 #
2204 # ignore A list (separated by ';') of file and directory names
2205 # that will not be searched for messages by "notmuch new".
2206 #
2207 # NOTE: *Every* file/directory that goes by one of those
2208 # names will be ignored, independent of its depth/location
2209 # in the mail store.
2210 #
2211 [new]
2212 tags=new;
2213 #tags=unread;inbox;
2214 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2215
2216 # Search configuration
2217 #
2218 # The following option is supported here:
2219 #
2220 # exclude_tags
2221 # A ;-separated list of tags that will be excluded from
2222 # search results by default. Using an excluded tag in a
2223 # query will override that exclusion.
2224 #
2225 [search]
2226 exclude_tags=deleted;spam;
2227
2228 # Maildir compatibility configuration
2229 #
2230 # The following option is supported here:
2231 #
2232 # synchronize_flags Valid values are true and false.
2233 #
2234 # If true, then the following maildir flags (in message filenames)
2235 # will be synchronized with the corresponding notmuch tags:
2236 #
2237 # Flag Tag
2238 # ---- -------
2239 # D draft
2240 # F flagged
2241 # P passed
2242 # R replied
2243 # S unread (added when 'S' flag is not present)
2244 #
2245 # The "notmuch new" command will notice flag changes in filenames
2246 # and update tags, while the "notmuch tag" and "notmuch restore"
2247 # commands will notice tag changes and update flags in filenames
2248 #
2249 [maildir]
2250 synchronize_flags=true
2251
2252 # Cryptography related configuration
2253 #
2254 # The following option is supported here:
2255 #
2256 # gpg_path
2257 # binary name or full path to invoke gpg.
2258 #
2259 [crypto]
2260 gpg_path=gpg
2261 #+end_src
2262
2263 *** pre-new hook
2264 :PROPERTIES:
2265 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2266 :END:
2267
2268 #+begin_src sh
2269 touch /tmp/gnusieve.log
2270 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2271 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2272 #+end_src
2273
2274 *** post-new hook
2275 :PROPERTIES:
2276 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2277 :END:
2278
2279 #+begin_src sh
2280 # apply sent tag to messages sent by me
2281 notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2282
2283 # initial tagging
2284 notmuch tag -latest -- tag:latest
2285 notmuch tag +inbox +unread +latest -new -- tag:new
2286
2287
2288 # apply tags to lists
2289
2290 # <aminb>
2291 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2292 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2293
2294 notmuch tag -inbox +pay -- folder:amin/pay
2295 notmuch tag -inbox +banking -- folder:amin/banking
2296 notmuch tag -inbox +work -- folder:amin/work
2297 # </aminb>
2298
2299 # <uw>
2300 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2301 notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2302 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2303 notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2304 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2305
2306 notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
2307 notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2308 notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2309 notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2310 notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2311 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2312 # </uw>
2313
2314 # <gnu>
2315 notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2316 notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2317 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2318 notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2319 notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2320 notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2321 notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2322 notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2323 notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2324 notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2325 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2326
2327 notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2328 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2329 notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2330 notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2331
2332 notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2333 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2334 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2335 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2336 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2337 # </gnu>
2338
2339 notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2340 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2341 #+end_src
2342
2343 *** notmuch.service
2344 :PROPERTIES:
2345 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2346 :END:
2347
2348 #+begin_src conf :tangle no
2349 [Unit]
2350 Description=notmuch service
2351
2352 [Service]
2353 Type=oneshot
2354 ExecStart=/usr/bin/notmuch new
2355 StandardOutput=syslog
2356 StandardError=syslog
2357 #+end_src
2358
2359 *** notmuch.timer
2360 :PROPERTIES:
2361 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2362 :END:
2363
2364 #+begin_src conf :tangle no
2365 [Unit]
2366 Description=notmuch timer
2367
2368 [Timer]
2369 OnCalendar=*:0/5
2370 Persistent=true
2371 Unit=notmuch.service
2372
2373 [Install]
2374 WantedBy=timers.target
2375 #+end_src
2376
2377 ** offlineimap
2378
2379 *** offlineimaprc
2380 :PROPERTIES:
2381 :header-args+: :tangle ~/.offlineimaprc
2382 :END:
2383
2384 #+begin_src conf :tangle no
2385 [general]
2386 pythonfile = ~/.offlineimap.py
2387 accounts = Gmail, aminb
2388 maxsyncaccounts = 3
2389
2390 [Account Gmail]
2391 localrepository = GmailL
2392 remoterepository = GmailR
2393
2394 [Account aminb]
2395 localrepository = aminbL
2396 remoterepository = aminbR
2397
2398 [Repository GmailL]
2399 type = Maildir
2400 localfolders = ~/Maildir/Gmail
2401
2402 [Repository GmailR]
2403 type = IMAP
2404 remotehost = imap.gmail.com
2405 remoteusereval = mailuser("gmail")
2406 remotepasseval = mailpasswd("gmail")
2407 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2408 ssl = yes
2409 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2410 maxconnections = 1
2411 realdelete = no
2412
2413 [Repository aminbL]
2414 type = Maildir
2415 localfolders = ~/Maildir/aminb
2416
2417 [Repository aminbR]
2418 type = IMAP
2419 remotehost = mail.aminb.org
2420 remoteusereval = mailuser("aminb")
2421 remotepasseval = mailpasswd("aminb")
2422 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2423 ssl = yes
2424 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2425 maxconnections = 1
2426 realdelete = no
2427 #+end_src
2428
2429 *** offlineimap.py
2430 :PROPERTIES:
2431 :header-args+: :tangle ~/.offlineimap.py
2432 :END:
2433
2434 #+begin_src python :tangle no
2435 import os
2436 import subprocess
2437
2438 def mailpasswd(acct):
2439 acct = os.path.basename(acct)
2440 path = "/home/amin/.passwd/%s.gpg" % acct
2441 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2442 try:
2443 return subprocess.check_output(args).strip()
2444 except subprocess.CalledProcessError:
2445 return ""
2446
2447 def mailuser(acct):
2448 acct = os.path.basename(acct)
2449 path = "/home/amin/.passwd/%s" % acct
2450 args = ["cat", path]
2451 try:
2452 return subprocess.check_output(args).strip()
2453 except subprocess.CalledProcessError:
2454 return ""
2455
2456 def prime_gpg_agent():
2457 ret = False
2458 i = 1
2459 while not ret:
2460 ret = (mailpasswd("prime") == "prime")
2461 if i > 2:
2462 from offlineimap.ui import getglobalui
2463 sys.stderr.write("Error reading in passwords. Terminating.\n")
2464 getglobalui().terminate()
2465 i += 1
2466 return ret
2467
2468 prime_gpg_agent()
2469 #+end_src
2470
2471 ** pigeonhole
2472 *** gnu.sieve
2473 :PROPERTIES:
2474 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2475 :END:
2476
2477 #+begin_src conf
2478 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2479
2480 if anyof (
2481 address :is "from" "webmasters@gnu.org",
2482 address :is "from" "webmasters-comment@gnu.org") {
2483 fileinto :create "webmasters";
2484 stop;
2485 }
2486
2487 include :personal "lists";
2488 #+end_src
2489
2490 *** lists.sieve
2491 :PROPERTIES:
2492 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2493 :END:
2494
2495 #+begin_src conf
2496 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2497 "include" ];
2498
2499 if anyof (
2500 header :contains "list-id" "<emacs-devel.gnu.org>",
2501 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2502 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2503 header :contains "list-id" "<fencepost-users.gnu.org>",
2504 header :contains "list-id" "<guix-devel.gnu.org>",
2505 header :contains "list-id" "<guile-devel.gnu.org>",
2506 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2507 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2508 header :contains "list-id" "<www-commits.gnu.org>",
2509 header :contains "list-id" "<www-discuss.gnu.org>",
2510 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2511 header :contains "list-id" "<haskell-cafe.haskell.org>",
2512 header :contains "list-id" "<haskell-art.we.lurk.org>",
2513 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2514 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2515 set :lower "listname" "${1}";
2516 fileinto :create "l/${listname}";
2517 }
2518 }
2519
2520 if anyof (
2521 header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2522 header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2523 header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2524 header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2525 header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2526 if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2527 set :lower "username" "${1}";
2528 set :lower "listname" "${2}";
2529 fileinto :create "l/${username}/${listname}";
2530 }
2531 }
2532 #+end_src
2533
2534 ** polybar
2535
2536 *** config
2537 :PROPERTIES:
2538 :header-args+: :tangle ~/.config/polybar/config
2539 :END:
2540
2541 #+begin_src conf :tangle no
2542 ;=====================================================
2543 ;
2544 ; To learn more about how to configure Polybar
2545 ; go to https://github.com/jaagr/polybar
2546 ;
2547 ; The README contains alot of information
2548 ;
2549 ;=====================================================
2550
2551 [colors]
2552 ;background = ${xrdb:color0:#222}
2553 background = #222
2554 background-alt = #444
2555 ;foreground = ${xrdb:color7:#222}
2556 foreground = #eee
2557 foreground-alt = #888
2558 primary = #ffb52a
2559 secondary = #e60053
2560 alert = #bd2c40
2561
2562 [bar/main]
2563 ;monitor = ${env:MONITOR:HDMI-1}
2564 width = 100%
2565 height = 27
2566 ;offset-x = 1%
2567 ;offset-y = 1%
2568 radius = 3.0
2569 fixed-center = true
2570
2571 background = ${colors.background}
2572 foreground = ${colors.foreground}
2573
2574 line-size = 3
2575 line-color = #f00
2576
2577 border-size = 4
2578 border-color = #00000000
2579
2580 padding-left = 0
2581 padding-right = 2
2582
2583 module-margin-left = 2
2584 module-margin-right = 2
2585
2586 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2587 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2588 font-2 = Wuncon Siji:pixelsize=10;1
2589 font-3 = FontAwesome:pixelsize=10;1
2590
2591 modules-left = bspwm xwindow
2592 modules-center =
2593 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2594
2595 tray-position = right
2596 tray-padding = 1
2597 ;tray-transparent = true
2598 ;tray-background = #0063ff
2599 tray-maxsize = 18
2600
2601 wm-restack = bspwm
2602
2603 ;override-redirect = true
2604
2605 scroll-up = bspwm-desknext
2606 scroll-down = bspwm-deskprev
2607
2608 [module/xwindow]
2609 type = internal/xwindow
2610 label = %title:0:50:...%
2611
2612 [module/xkeyboard]
2613 type = internal/xkeyboard
2614 blacklist-0 = num lock
2615
2616 format-prefix = " "
2617 format-prefix-foreground = ${colors.foreground-alt}
2618 format-prefix-underline = ${colors.secondary}
2619
2620 label-layout = %layout%
2621 label-layout-underline = ${colors.secondary}
2622
2623 label-indicator-padding = 2
2624 label-indicator-margin = 1
2625 label-indicator-background = ${colors.secondary}
2626 label-indicator-underline = ${colors.secondary}
2627
2628 [module/filesystem]
2629 type = internal/fs
2630 interval = 25
2631
2632 mount-0 = /
2633
2634 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2635 label-unmounted = %mountpoint% not mounted
2636 label-unmounted-foreground = ${colors.foreground-alt}
2637
2638 [module/bspwm]
2639 type = internal/bspwm
2640
2641 label-focused = %index%
2642 label-focused-background = ${colors.background-alt}
2643 label-focused-underline= ${colors.primary}
2644 label-focused-padding = 2
2645
2646 label-occupied = %index%
2647 label-occupied-padding = 2
2648
2649 label-urgent = %index%!
2650 label-urgent-background = ${colors.alert}
2651 label-urgent-padding = 2
2652
2653 label-empty = %index%
2654 label-empty-foreground = ${colors.foreground-alt}
2655 label-empty-padding = 2
2656
2657 [module/i3]
2658 type = internal/i3
2659 format = <label-state> <label-mode>
2660 index-sort = true
2661 wrapping-scroll = false
2662
2663 ; Only show workspaces on the same output as the bar
2664 ;pin-workspaces = true
2665
2666 label-mode-padding = 2
2667 label-mode-foreground = #000
2668 label-mode-background = ${colors.primary}
2669
2670 ; focused = Active workspace on focused monitor
2671 label-focused = %index%
2672 label-focused-background = ${module/bspwm.label-focused-background}
2673 label-focused-underline = ${module/bspwm.label-focused-underline}
2674 label-focused-padding = ${module/bspwm.label-focused-padding}
2675
2676 ; unfocused = Inactive workspace on any monitor
2677 label-unfocused = %index%
2678 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2679
2680 ; visible = Active workspace on unfocused monitor
2681 label-visible = %index%
2682 label-visible-background = ${self.label-focused-background}
2683 label-visible-underline = ${self.label-focused-underline}
2684 label-visible-padding = ${self.label-focused-padding}
2685
2686 ; urgent = Workspace with urgency hint set
2687 label-urgent = %index%
2688 label-urgent-background = ${module/bspwm.label-urgent-background}
2689 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2690
2691 [module/mpd]
2692 type = internal/mpd
2693 format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2694
2695 icon-prev = 
2696 icon-stop = 
2697 icon-play = 
2698 icon-pause = 
2699 icon-next = 
2700
2701 label-song-maxlen = 25
2702 label-song-ellipsis = true
2703
2704 [module/xbacklight]
2705 type = internal/xbacklight
2706
2707 format = <label> <bar>
2708 label = BL
2709
2710 bar-width = 10
2711 bar-indicator = |
2712 bar-indicator-foreground = #ff
2713 bar-indicator-font = 2
2714 bar-fill = ─
2715 bar-fill-font = 2
2716 bar-fill-foreground = #9f78e1
2717 bar-empty = ─
2718 bar-empty-font = 2
2719 bar-empty-foreground = ${colors.foreground-alt}
2720
2721 [module/backlight-acpi]
2722 inherit = module/xbacklight
2723 type = internal/backlight
2724 ;card = intel_backlight
2725 card = mba6x_backlight
2726
2727 [module/cpu]
2728 type = internal/cpu
2729 interval = 2
2730 format-prefix = " "
2731 format-prefix-foreground = ${colors.foreground-alt}
2732 format-underline = #f90000
2733 label = %percentage%%
2734
2735 [module/memory]
2736 type = internal/memory
2737 interval = 2
2738 format-prefix = " "
2739 format-prefix-foreground = ${colors.foreground-alt}
2740 format-underline = #4bffdc
2741 label = %percentage_used%%
2742
2743 [module/wlan]
2744 type = internal/network
2745 interface =
2746 interval = 3.0
2747
2748 format-connected = <ramp-signal> <label-connected>
2749 format-connected-underline = #9f78e1
2750 label-connected = %essid%
2751
2752 format-disconnected =
2753 ;format-disconnected = <label-disconnected>
2754 ;format-disconnected-underline = ${self.format-connected-underline}
2755 ;label-disconnected = %ifname% disconnected
2756 ;label-disconnected-foreground = ${colors.foreground-alt}
2757
2758 ramp-signal-0 = 
2759 ramp-signal-1 = 
2760 ramp-signal-2 = 
2761 ramp-signal-3 = 
2762 ramp-signal-4 = 
2763 ramp-signal-foreground = ${colors.foreground-alt}
2764
2765 [module/eth]
2766 type = internal/network
2767 interface =
2768 interval = 3.0
2769
2770 format-connected-underline = #55aa55
2771 format-connected-prefix = " "
2772 format-connected-prefix-foreground = ${colors.foreground-alt}
2773 label-connected = %local_ip%
2774
2775 format-disconnected =
2776 ;format-disconnected = <label-disconnected>
2777 ;format-disconnected-underline = ${self.format-connected-underline}
2778 ;label-disconnected = %ifname% disconnected
2779 ;label-disconnected-foreground = ${colors.foreground-alt}
2780
2781 [module/date]
2782 type = internal/date
2783 interval = 5
2784
2785 date =
2786 date-alt = " %Y-%m-%d"
2787
2788 time = %H:%M
2789 time-alt = %H:%M:%S
2790
2791 format-prefix = 
2792 format-prefix-foreground = ${colors.foreground-alt}
2793 format-underline = #0a6cf5
2794
2795 label = %date% %time%
2796
2797 [module/volume]
2798 type = internal/volume
2799
2800 format-volume = <label-volume> <bar-volume>
2801 label-volume = vol
2802 label-volume-foreground = ${root.foreground}
2803
2804 format-muted-prefix = " "
2805 format-muted-foreground = ${colors.foreground-alt}
2806 label-muted = mute
2807
2808 bar-volume-width = 10
2809 bar-volume-foreground-0 = #55aa55
2810 bar-volume-foreground-1 = #55aa55
2811 bar-volume-foreground-2 = #55aa55
2812 bar-volume-foreground-3 = #55aa55
2813 bar-volume-foreground-4 = #55aa55
2814 bar-volume-foreground-5 = #f5a70a
2815 bar-volume-foreground-6 = #ff5555
2816 bar-volume-gradient = false
2817 bar-volume-indicator = |
2818 bar-volume-indicator-font = 2
2819 bar-volume-fill = ─
2820 bar-volume-fill-font = 2
2821 bar-volume-empty = ─
2822 bar-volume-empty-font = 2
2823 bar-volume-empty-foreground = ${colors.foreground-alt}
2824
2825 [module/battery]
2826 type = internal/battery
2827 battery = BAT0
2828 adapter = ADP1
2829 full-at = 64
2830
2831 format-charging = <animation-charging> <label-charging>
2832 format-charging-underline = #ffb52a
2833
2834 format-discharging = <ramp-capacity> <label-discharging>
2835 format-discharging-underline = ${self.format-charging-underline}
2836
2837 format-full-prefix = " "
2838 format-full-prefix-foreground = ${colors.foreground-alt}
2839 format-full-underline = ${self.format-charging-underline}
2840
2841 ramp-capacity-0 = 
2842 ramp-capacity-1 = 
2843 ramp-capacity-2 = 
2844 ramp-capacity-foreground = ${colors.foreground-alt}
2845
2846 animation-charging-0 = 
2847 animation-charging-1 = 
2848 animation-charging-2 = 
2849 animation-charging-foreground = ${colors.foreground-alt}
2850 animation-charging-framerate = 750
2851
2852 [module/temperature]
2853 type = internal/temperature
2854 thermal-zone = 1
2855 warn-temperature = 66
2856
2857 format = <ramp> <label>
2858 format-underline = #f50a4d
2859 format-warn = <ramp> <label-warn>
2860 format-warn-underline = ${self.format-underline}
2861
2862 label = %temperature%
2863 label-warn = %temperature%
2864 label-warn-foreground = ${colors.secondary}
2865
2866 ramp-0 = 
2867 ramp-1 = 
2868 ramp-2 = 
2869 ramp-foreground = ${colors.foreground-alt}
2870
2871 [module/powermenu]
2872 type = custom/menu
2873
2874 format-spacing = 1
2875
2876 label-open = 
2877 label-open-foreground = ${colors.secondary}
2878 label-close =  cancel
2879 label-close-foreground = ${colors.secondary}
2880 label-separator = |
2881 label-separator-foreground = ${colors.foreground-alt}
2882
2883 menu-0-0 = reboot
2884 menu-0-0-exec = menu-open-1
2885 menu-0-1 = power off
2886 menu-0-1-exec = menu-open-2
2887
2888 menu-1-0 = cancel
2889 menu-1-0-exec = menu-open-0
2890 menu-1-1 = reboot
2891 menu-1-1-exec = sudo reboot
2892
2893 menu-2-0 = power off
2894 menu-2-0-exec = sudo poweroff
2895 menu-2-1 = cancel
2896 menu-2-1-exec = menu-open-0
2897
2898 [module/mail]
2899 type = custom/script
2900 interval = 60
2901 format = <label>
2902 format-prefix = " "
2903 format-prefix-foreground = ${colors.foreground-alt}
2904 format-underline = #0a6cf5
2905 exec = notmuch count tag:unread
2906
2907 [settings]
2908 screenchange-reload = true
2909 ;compositing-background = xor
2910 ;compositing-background = screen
2911 ;compositing-foreground = source
2912 ;compositing-border = over
2913
2914 [global/wm]
2915 margin-top = 0
2916 margin-bottom = 0
2917
2918 ; vim:ft=dosini
2919 #+end_src
2920
2921 *** polybar-launch
2922 :PROPERTIES:
2923 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2924 :END:
2925
2926 #+begin_src sh :tangle no
2927 # Terminate already running bar instances
2928 killall -q polybar
2929
2930 # Wait until the processes have been shut down
2931 while pgrep -x polybar >/dev/null; do sleep 1; done
2932
2933 # Launch main bar
2934 polybar main &
2935
2936 echo "Bars launched..."
2937 #+end_src
2938
2939 ** PowerTOP
2940 :PROPERTIES:
2941 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2942 :END:
2943
2944 #+begin_src conf
2945 [Unit]
2946 Description=Powertop tunings
2947
2948 [Service]
2949 ExecStart=/usr/bin/powertop --auto-tune
2950 RemainAfterExit=true
2951
2952 [Install]
2953 WantedBy=multi-user.target
2954 #+end_src
2955
2956 ** ranger
2957
2958 *** rc.conf
2959 :PROPERTIES:
2960 :header-args+: :tangle ~/.config/ranger/rc.conf
2961 :END:
2962
2963 #+begin_src conf :tangle no
2964 # ===================================================================
2965 # This file contains the default startup commands for ranger.
2966 # To change them, it is recommended to create the file
2967 # ~/.config/ranger/rc.conf and add your custom commands there.
2968 #
2969 # If you copy this whole file there, you may want to set the environment
2970 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2971 #
2972 # The purpose of this file is mainly to define keybindings and settings.
2973 # For running more complex python code, please create a plugin in "plugins/" or
2974 # a command in "commands.py".
2975 #
2976 # Each line is a command that will be run before the user interface
2977 # is initialized. As a result, you can not use commands which rely
2978 # on the UI such as :delete or :mark.
2979 # ===================================================================
2980
2981 # ===================================================================
2982 # == Options
2983 # ===================================================================
2984
2985 # How many columns are there, and what are their relative widths?
2986 set column_ratios 1,3,4
2987
2988 # Which files should be hidden? (regular expression)
2989 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2990
2991 # Show hidden files? You can toggle this by typing 'zh'
2992 set show_hidden false
2993
2994 # Ask for a confirmation when running the "delete" command?
2995 # Valid values are "always" (default), "never", "multiple"
2996 # With "multiple", ranger will ask only if you delete multiple files at once.
2997 set confirm_on_delete multiple
2998
2999 # Which script is used to generate file previews?
3000 # ranger ships with scope.sh, a script that calls external programs (see
3001 # README for dependencies) to preview images, archives, etc.
3002 set preview_script ~/.config/ranger/scope.sh
3003
3004 # Use the external preview script or display simple plain text previews?
3005 set use_preview_script true
3006
3007 # Open all images in this directory when running certain image viewers
3008 # like feh or sxiv? You can still open selected files by marking them.
3009 set open_all_images true
3010
3011 # Be aware of version control systems and display information.
3012 set vcs_aware false
3013
3014 # State of the three backends git, hg, bzr. The possible states are
3015 # disabled, local (only show local info), enabled (show local and remote
3016 # information).
3017 set vcs_backend_git enabled
3018 set vcs_backend_hg disabled
3019 set vcs_backend_bzr disabled
3020
3021 # Preview images in full color with the external command "w3mimgpreview"?
3022 # This requires the console web browser "w3m" and a supported terminal.
3023 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3024 set preview_images true
3025
3026 # Use a unicode "..." character to mark cut-off filenames?
3027 set unicode_ellipsis false
3028
3029 # Show dotfiles in the bookmark preview box?
3030 set show_hidden_bookmarks true
3031
3032 # Which colorscheme to use? These colorschemes are available by default:
3033 # default, jungle, snow
3034 set colorscheme default
3035
3036 # Preview files on the rightmost column?
3037 # And collapse (shrink) the last column if there is nothing to preview?
3038 set preview_files true
3039 set preview_directories true
3040 set collapse_preview true
3041
3042 # Save the console history on exit?
3043 set save_console_history true
3044
3045 # Draw the status bar on top of the browser window (default: bottom)
3046 set status_bar_on_top false
3047
3048 # Draw a progress bar in the status bar which displays the average state of all
3049 # currently running tasks which support progress bars?
3050 set draw_progress_bar_in_status_bar true
3051
3052 # Draw borders around columns?
3053 set draw_borders true
3054
3055 # Display the directory name in tabs?
3056 set dirname_in_tabs false
3057
3058 # Enable the mouse support?
3059 set mouse_enabled true
3060
3061 # Display the file size in the main column or status bar?
3062 set display_size_in_main_column true
3063 set display_size_in_status_bar true
3064
3065 # Display files tags in all columns or only in main column?
3066 set display_tags_in_all_columns true
3067
3068 # Set a title for the window?
3069 set update_title false
3070
3071 # Set the title to "ranger" in the tmux program?
3072 set update_tmux_title false
3073
3074 # Shorten the title if it gets long? The number defines how many
3075 # directories are displayed at once, 0 turns off this feature.
3076 set shorten_title 3
3077
3078 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3079 set tilde_in_titlebar false
3080
3081 # How many directory-changes or console-commands should be kept in history?
3082 set max_history_size 20
3083 set max_console_history_size 50
3084
3085 # Try to keep so much space between the top/bottom border when scrolling:
3086 set scroll_offset 8
3087
3088 # Flush the input after each key hit? (Noticable when ranger lags)
3089 set flushinput true
3090
3091 # Padding on the right when there's no preview?
3092 # This allows you to click into the space to run the file.
3093 set padding_right true
3094
3095 # Save bookmarks (used with mX and `X) instantly?
3096 # This helps to synchronize bookmarks between multiple ranger
3097 # instances but leads to *slight* performance loss.
3098 # When false, bookmarks are saved when ranger is exited.
3099 set autosave_bookmarks true
3100
3101 # You can display the "real" cumulative size of directories by using the
3102 # command :get_cumulative_size or typing "dc". The size is expensive to
3103 # calculate and will not be updated automatically. You can choose
3104 # to update it automatically though by turning on this option:
3105 set autoupdate_cumulative_size false
3106
3107 # Turning this on makes sense for screen readers:
3108 set show_cursor false
3109
3110 # One of: size, basename, mtime, type
3111 set sort natural
3112
3113 # Additional sorting options
3114 set sort_reverse false
3115 set sort_case_insensitive true
3116 set sort_directories_first true
3117
3118 # Enable this if key combinations with the Alt Key don't work for you.
3119 # (Especially on xterm)
3120 set xterm_alt_key false
3121
3122 # ===================================================================
3123 # == Local Options
3124 # ===================================================================
3125 # You can set local options that only affect a single directory.
3126
3127 # Examples:
3128 # setlocal path=~/downloads sort mtime
3129
3130 # ===================================================================
3131 # == Command Aliases in the Console
3132 # ===================================================================
3133
3134 alias e edit
3135 alias q quit
3136 alias q! quitall
3137 alias qall quitall
3138 alias setl setlocal
3139
3140 alias filter scout -prt
3141 alias find scout -aet
3142 alias mark scout -mr
3143 alias unmark scout -Mr
3144 alias search scout -rs
3145 alias search_inc scout -rts
3146 alias travel scout -aefiklst
3147
3148 # ===================================================================
3149 # == Define keys for the browser
3150 # ===================================================================
3151
3152 # Basic
3153 map Q quit!
3154 map q quit
3155 copymap q ZZ ZQ
3156
3157 map R reload_cwd
3158 map <C-r> reset
3159 map <C-l> redraw_window
3160 map <C-c> abort
3161 map <esc> change_mode normal
3162
3163 map i display_file
3164 map ? help
3165 map W display_log
3166 map w taskview_open
3167 map S shell $SHELL
3168
3169 map : console
3170 map ; console
3171 map ! console shell
3172 map @ console -p6 shell %%s
3173 map # console shell -p
3174 map s console shell
3175 map r chain draw_possible_programs; console open_with
3176 map f console find
3177 map cd console cd
3178
3179 # Tagging / Marking
3180 map t tag_toggle
3181 map ut tag_remove
3182 map "<any> tag_toggle tag=%any
3183 map <Space> mark_files toggle=True
3184 map v mark_files all=True toggle=True
3185 map uv mark_files all=True val=False
3186 map V toggle_visual_mode
3187 map uV toggle_visual_mode reverse=True
3188
3189 # For the nostalgics: Midnight Commander bindings
3190 map <F1> help
3191 map <F3> display_file
3192 map <F4> edit
3193 map <F5> copy
3194 map <F6> cut
3195 map <F7> console mkdir
3196 map <F8> console delete
3197 map <F10> exit
3198
3199 # In case you work on a keyboard with dvorak layout
3200 map <UP> move up=1
3201 map <DOWN> move down=1
3202 map <LEFT> move left=1
3203 map <RIGHT> move right=1
3204 map <HOME> move to=0
3205 map <END> move to=-1
3206 map <PAGEDOWN> move down=1 pages=True
3207 map <PAGEUP> move up=1 pages=True
3208 map <CR> move right=1
3209 map <DELETE> console delete
3210 map <INSERT> console touch
3211
3212 # VIM-like
3213 copymap <UP> k
3214 copymap <DOWN> j
3215 copymap <LEFT> h
3216 copymap <RIGHT> l
3217 copymap <HOME> gg
3218 copymap <END> G
3219 copymap <PAGEDOWN> <C-F>
3220 copymap <PAGEUP> <C-B>
3221
3222 map J move down=0.5 pages=True
3223 map K move up=0.5 pages=True
3224 copymap J <C-D>
3225 copymap K <C-U>
3226
3227 # Jumping around
3228 map H history_go -1
3229 map L history_go 1
3230 map ] move_parent 1
3231 map [ move_parent -1
3232 map } traverse
3233
3234 map gh cd ~
3235 map ge cd /etc
3236 map gu cd /usr
3237 map gd cd /dev
3238 map gl cd -r .
3239 map gL cd -r %f
3240 map go cd /opt
3241 map gv cd /var
3242 map gm cd /media
3243 map gM cd /mnt
3244 map gs cd /srv
3245 map gr cd /
3246 map gR eval fm.cd(ranger.RANGERDIR)
3247 map g/ cd /
3248 map g? cd /usr/share/doc/ranger
3249
3250 # External Programs
3251 map E edit
3252 map du shell -p du --max-depth=1 -h --apparent-size
3253 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3254 map yp shell -d echo -n %d/%f | xsel -i
3255 map yd shell -d echo -n %d | xsel -i
3256 map yn shell -d echo -n %f | xsel -i
3257
3258 # Filesystem Operations
3259 map = chmod
3260
3261 map cw console rename
3262 map A eval fm.open_console('rename ' + fm.thisfile.basename)
3263 map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3264
3265 map pp paste
3266 map po paste overwrite=True
3267 map pl paste_symlink relative=False
3268 map pL paste_symlink relative=True
3269 map phl paste_hardlink
3270 map pht paste_hardlinked_subtree
3271
3272 map dd cut
3273 map ud uncut
3274 map da cut mode=add
3275 map dr cut mode=remove
3276
3277 map yy copy
3278 map uy uncut
3279 map ya copy mode=add
3280 map yr copy mode=remove
3281
3282 # Temporary workarounds
3283 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3284 map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3285 map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3286 map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3287 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3288 map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3289 map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3290 map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3291
3292 # Searching
3293 map / console search
3294 map n search_next
3295 map N search_next forward=False
3296 map ct search_next order=tag
3297 map cs search_next order=size
3298 map ci search_next order=mimetype
3299 map cc search_next order=ctime
3300 map cm search_next order=mtime
3301 map ca search_next order=atime
3302
3303 # Tabs
3304 map <C-n> tab_new ~
3305 map <C-w> tab_close
3306 map <TAB> tab_move 1
3307 map <S-TAB> tab_move -1
3308 map <A-Right> tab_move 1
3309 map <A-Left> tab_move -1
3310 map gt tab_move 1
3311 map gT tab_move -1
3312 map gn tab_new ~
3313 map gc tab_close
3314 map uq tab_restore
3315 map <a-1> tab_open 1
3316 map <a-2> tab_open 2
3317 map <a-3> tab_open 3
3318 map <a-4> tab_open 4
3319 map <a-5> tab_open 5
3320 map <a-6> tab_open 6
3321 map <a-7> tab_open 7
3322 map <a-8> tab_open 8
3323 map <a-9> tab_open 9
3324
3325 # Sorting
3326 map or toggle_option sort_reverse
3327 map os chain set sort=size; set sort_reverse=False
3328 map ob chain set sort=basename; set sort_reverse=False
3329 map on chain set sort=natural; set sort_reverse=False
3330 map om chain set sort=mtime; set sort_reverse=False
3331 map oc chain set sort=ctime; set sort_reverse=False
3332 map oa chain set sort=atime; set sort_reverse=False
3333 map ot chain set sort=type; set sort_reverse=False
3334
3335 map oS chain set sort=size; set sort_reverse=True
3336 map oB chain set sort=basename; set sort_reverse=True
3337 map oN chain set sort=natural; set sort_reverse=True
3338 map oM chain set sort=mtime; set sort_reverse=True
3339 map oC chain set sort=ctime; set sort_reverse=True
3340 map oA chain set sort=atime; set sort_reverse=True
3341 map oT chain set sort=type; set sort_reverse=True
3342
3343 map dc get_cumulative_size
3344
3345 # Settings
3346 map zc toggle_option collapse_preview
3347 map zd toggle_option sort_directories_first
3348 map zh toggle_option show_hidden
3349 map <C-h> toggle_option show_hidden
3350 map zi toggle_option flushinput
3351 map zm toggle_option mouse_enabled
3352 map zp toggle_option preview_files
3353 map zP toggle_option preview_directories
3354 map zs toggle_option sort_case_insensitive
3355 map zu toggle_option autoupdate_cumulative_size
3356 map zv toggle_option use_preview_script
3357 map zf console filter
3358
3359 # Bookmarks
3360 map `<any> enter_bookmark %any
3361 map '<any> enter_bookmark %any
3362 map m<any> set_bookmark %any
3363 map um<any> unset_bookmark %any
3364
3365 map m<bg> draw_bookmarks
3366 copymap m<bg> um<bg> `<bg> '<bg>
3367
3368 # Generate all the chmod bindings with some python help:
3369 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3370 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3371 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3372 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3373 eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3374
3375 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3376 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3377 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3378 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3379 eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3380
3381 # ===================================================================
3382 # == Define keys for the console
3383 # ===================================================================
3384 # Note: Unmapped keys are passed directly to the console.
3385
3386 # Basic
3387 cmap <tab> eval fm.ui.console.tab()
3388 cmap <s-tab> eval fm.ui.console.tab(-1)
3389 cmap <ESC> eval fm.ui.console.close()
3390 cmap <CR> eval fm.ui.console.execute()
3391 cmap <C-l> redraw_window
3392
3393 copycmap <ESC> <C-c>
3394 copycmap <CR> <C-j>
3395
3396 # Move around
3397 cmap <up> eval fm.ui.console.history_move(-1)
3398 cmap <down> eval fm.ui.console.history_move(1)
3399 cmap <left> eval fm.ui.console.move(left=1)
3400 cmap <right> eval fm.ui.console.move(right=1)
3401 cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3402 cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3403
3404 # Line Editing
3405 cmap <backspace> eval fm.ui.console.delete(-1)
3406 cmap <delete> eval fm.ui.console.delete(0)
3407 cmap <C-w> eval fm.ui.console.delete_word()
3408 cmap <C-k> eval fm.ui.console.delete_rest(1)
3409 cmap <C-u> eval fm.ui.console.delete_rest(-1)
3410 cmap <C-y> eval fm.ui.console.paste()
3411
3412 # And of course the emacs way
3413 copycmap <up> <C-p>
3414 copycmap <down> <C-n>
3415 copycmap <left> <C-b>
3416 copycmap <right> <C-f>
3417 copycmap <home> <C-a>
3418 copycmap <end> <C-e>
3419 copycmap <delete> <C-d>
3420 copycmap <backspace> <C-h>
3421
3422 # Note: There are multiple ways to express backspaces. <backspace> (code 263)
3423 # and <backspace2> (code 127). To be sure, use both.
3424 copycmap <backspace> <backspace2>
3425
3426 # This special expression allows typing in numerals:
3427 cmap <allow_quantifiers> false
3428
3429 # ===================================================================
3430 # == Pager Keybindings
3431 # ===================================================================
3432
3433 # Movement
3434 pmap <down> pager_move down=1
3435 pmap <up> pager_move up=1
3436 pmap <left> pager_move left=4
3437 pmap <right> pager_move right=4
3438 pmap <home> pager_move to=0
3439 pmap <end> pager_move to=-1
3440 pmap <pagedown> pager_move down=1.0 pages=True
3441 pmap <pageup> pager_move up=1.0 pages=True
3442 pmap <C-d> pager_move down=0.5 pages=True
3443 pmap <C-u> pager_move up=0.5 pages=True
3444
3445 copypmap <UP> k <C-p>
3446 copypmap <DOWN> j <C-n> <CR>
3447 copypmap <LEFT> h
3448 copypmap <RIGHT> l
3449 copypmap <HOME> g
3450 copypmap <END> G
3451 copypmap <C-d> d
3452 copypmap <C-u> u
3453 copypmap <PAGEDOWN> n f <C-F> <Space>
3454 copypmap <PAGEUP> p b <C-B>
3455
3456 # Basic
3457 pmap <ESC> pager_close
3458 copypmap <ESC> q Q i <F3>
3459 pmap E edit_file
3460
3461 # ===================================================================
3462 # == Taskview Keybindings
3463 # ===================================================================
3464
3465 # Movement
3466 tmap <up> taskview_move up=1
3467 tmap <down> taskview_move down=1
3468 tmap <home> taskview_move to=0
3469 tmap <end> taskview_move to=-1
3470 tmap <pagedown> taskview_move down=1.0 pages=True
3471 tmap <pageup> taskview_move up=1.0 pages=True
3472 tmap <C-d> taskview_move down=0.5 pages=True
3473 tmap <C-u> taskview_move up=0.5 pages=True
3474
3475 copytmap <UP> k <C-p>
3476 copytmap <DOWN> j <C-n> <CR>
3477 copytmap <HOME> g
3478 copytmap <END> G
3479 copytmap <C-u> u
3480 copytmap <PAGEDOWN> n f <C-F> <Space>
3481 copytmap <PAGEUP> p b <C-B>
3482
3483 # Changing priority and deleting tasks
3484 tmap J eval -q fm.ui.taskview.task_move(-1)
3485 tmap K eval -q fm.ui.taskview.task_move(0)
3486 tmap dd eval -q fm.ui.taskview.task_remove()
3487 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3488 tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3489 tmap <delete> eval -q fm.ui.taskview.task_remove()
3490
3491 # Basic
3492 tmap <ESC> taskview_close
3493 copytmap <ESC> q Q w <C-c>
3494 #+end_src
3495
3496 *** scope.sh
3497 :PROPERTIES:
3498 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3499 :END:
3500
3501 #+begin_src sh :tangle no
3502 # ranger supports enhanced previews. If the option "use_preview_script"
3503 # is set to True and this file exists, this script will be called and its
3504 # output is displayed in ranger. ANSI color codes are supported.
3505
3506 # NOTES: This script is considered a configuration file. If you upgrade
3507 # ranger, it will be left untouched. (You must update it yourself.)
3508 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3509
3510 # Meanings of exit codes:
3511 # code | meaning | action of ranger
3512 # -----+------------+-------------------------------------------
3513 # 0 | success | success. display stdout as preview
3514 # 1 | no preview | failure. display no preview at all
3515 # 2 | plain text | display the plain content of the file
3516 # 3 | fix width | success. Don't reload when width changes
3517 # 4 | fix height | success. Don't reload when height changes
3518 # 5 | fix both | success. Don't ever reload
3519
3520 # Meaningful aliases for arguments:
3521 path="$1" # Full path of the selected file
3522 width="$2" # Width of the preview pane (number of fitting characters)
3523 height="$3" # Height of the preview pane (number of fitting characters)
3524
3525 maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3526
3527 # Find out something about the file:
3528 mimetype=$(file --mime-type -Lb "$path")
3529 extension=${path##*.}
3530
3531 # Functions:
3532 # runs a command and saves its output into $output. Useful if you need
3533 # the return value AND want to use the output in a pipe
3534 try() { output=$(eval '"$@"'); }
3535
3536 # writes the output of the previouosly used "try" command
3537 dump() { echo "$output"; }
3538
3539 # a common post-processing function used after most commands
3540 trim() { head -n "$maxln"; }
3541
3542 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3543 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3544
3545 case "$extension" in
3546 # Archive extensions:
3547 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3548 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3549 try als "$path" && { dump | trim; exit 0; }
3550 try acat "$path" && { dump | trim; exit 3; }
3551 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3552 exit 1;;
3553 rar)
3554 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3555 # PDF documents:
3556 pdf)
3557 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3558 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3559 # BitTorrent Files
3560 torrent)
3561 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3562 # HTML Pages:
3563 htm|html|xhtml)
3564 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3565 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3566 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3567 ;; # fall back to highlight/cat if the text browsers fail
3568 esac
3569
3570 case "$mimetype" in
3571 # Syntax highlight for text files:
3572 text/* | */xml)
3573 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3574 # Ascii-previews of images:
3575 image/*)
3576 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3577 # Display information about media files:
3578 video/* | audio/*)
3579 exiftool "$path" && exit 5
3580 # Use sed to remove spaces so the output fits into the narrow window
3581 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3582 esac
3583
3584 exit 1
3585 #+end_src
3586
3587 ** redshift
3588 :PROPERTIES:
3589 :header-args+: :tangle ~/.config/redshift.conf :comments none
3590 :END:
3591
3592 #+begin_src conf
3593 ; Global settings for redshift
3594 [redshift]
3595 ; Set the day and night screen temperatures (Neutral is 6500K)
3596 ;temp-day=5700
3597 ;temp-night=3500
3598
3599 ;temp-day=6500
3600 temp-day=6200
3601 ;temp-night=4800
3602 ;temp-night=5000
3603 ;temp-night=4500
3604 temp-night=4000
3605
3606 ; Enable/Disable a smooth transition between day and night
3607 ; 0 will cause a direct change from day to night screen temperature.
3608 ; 1 will gradually increase or decrease the screen temperature.
3609 transition=1
3610
3611 ; Set the screen brightness. Default is 1.0.
3612 ;brightness=0.9
3613 ; It is also possible to use different settings for day and night
3614 ; since version 1.8.
3615 ;brightness-day=0.7
3616 ;brightness-night=0.4
3617 ; Set the screen gamma (for all colors, or each color channel
3618 ; individually)
3619 ;gamma=0.8
3620 ;gamma=1.0
3621 ;gamma=0.8:0.7:0.8
3622 ; This can also be set individually for day and night since
3623 ; version 1.10.
3624 ;gamma-day=0.8:0.7:0.8
3625 ;gamma-night=0.6
3626
3627 ; Set the location-provider: 'geoclue2' or 'manual'
3628 ; type 'redshift -l list' to see possible values.
3629 ; The location provider settings are in a different section.
3630 ;location-provider=manual
3631 location-provider=geoclue2
3632
3633 ; Set the adjustment-method: 'randr', 'vidmode'
3634 ; type 'redshift -m list' to see all possible values.
3635 ; 'randr' is the preferred method, 'vidmode' is an older API.
3636 ; but works in some cases when 'randr' does not.
3637 ; The adjustment method settings are in a different section.
3638 adjustment-method=randr
3639
3640 ; Configuration of the location-provider:
3641 ; type 'redshift -l PROVIDER:help' to see the settings.
3642 ; ex: 'redshift -l manual:help'
3643 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3644 ; are negative numbers.
3645 ;[manual]
3646 ;lat=48.1
3647 ;lon=11.6
3648
3649 ; Configuration of the adjustment-method
3650 ; type 'redshift -m METHOD:help' to see the settings.
3651 ; ex: 'redshift -m randr:help'
3652 ; In this example, randr is configured to adjust screen 1.
3653 ; Note that the numbering starts from 0, so this is actually the
3654 ; second screen. If this option is not specified, Redshift will try
3655 ; to adjust _all_ screens.
3656 ;[randr]
3657 ;screen=1
3658 #+end_src
3659
3660 ** rofi
3661 :PROPERTIES:
3662 :header-args+: :tangle ~/.config/rofi/config
3663 :END:
3664
3665 #+begin_src conf
3666 ! rofi.font: Ubuntu Mono 13
3667 ! rofi.font: Inconsolata 16
3668 ! rofi.font: Iosevka 13
3669 ! rofi.font: Source Code Pro 11
3670 rofi.font: Source Code Pro 10.5
3671 rofi.modi: run,window
3672 ! rofi.width: 640
3673 rofi.width: 600
3674 !rofi.location: 2
3675 !rofi.yoffset: 200
3676 rofi.monitor: -1
3677 !rofi.lines: 10
3678
3679 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3680 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3681 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3682
3683 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3684 #+end_src
3685
3686 ** rofi-pass
3687 :PROPERTIES:
3688 :header-args+: :tangle ~/.config/rofi-pass/config
3689 :END:
3690
3691 #+begin_src conf
3692 # permanently set alternative root dir
3693 # root=/path/to/root
3694
3695 # rofi command. Make sure to have "$@" as last argument
3696 _rofi () {
3697 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3698 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3699 }
3700
3701 # xdotool needs the keyboard layout to be set using setxkbmap
3702 # You can do this in your autostart scripts (e.g. xinitrc)
3703
3704 # If for some reason, you cannot do this, you can set the command here.
3705 # and set fix_layout to true
3706 fix_layout=false
3707
3708 layout_cmd () {
3709 setxkbmap us
3710 }
3711
3712 # fields to be used
3713 URL_field='url'
3714 USERNAME_field='user'
3715 AUTOTYPE_field='autotype'
3716
3717 # delay to be used for :delay keyword
3718 delay=2
3719
3720 ## Programs to be used
3721 # Editor
3722 EDITOR='gvim -f'
3723
3724 # Browser
3725 BROWSER='chromium'
3726
3727 ## Misc settings
3728
3729 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3730 auto_enter='false'
3731 notify='false'
3732 default_autotype='user :tab pass'
3733
3734 # color of the help messages
3735 # leave empty for autodetection
3736 help_color="#4872FF"
3737
3738 # Clipboard settings
3739 # Possible options: primary, clipboard, both
3740 clip=primary
3741
3742 # Options for generating new password entries
3743 # default_user is also used for password files that have no user field.
3744 default_user=aminb
3745 default_user2=aminban
3746 password_length=30
3747
3748 # Custom Keybindings
3749 #autotype="Alt+1"
3750 autotype="Alt+m"
3751 type_user="Alt+2"
3752 type_pass="Alt+3"
3753 open_url="Alt+4"
3754 copy_name="Alt+u"
3755 copy_url="Alt+l"
3756 copy_pass="Alt+p"
3757 show="Alt+o"
3758 copy_entry="Alt+2"
3759 type_entry="Alt+1"
3760 copy_menu="Alt+c"
3761 action_menu="Alt+a"
3762 type_menu="Alt+t"
3763 help="Alt+h"
3764 switch="Alt+x"
3765 insert_pass="Alt+n"
3766 #+end_src
3767
3768 ** sway
3769
3770 *** main
3771 :PROPERTIES:
3772 :header-args+: :tangle ~/.config/sway/config
3773 :END:
3774
3775 #+begin_src conf
3776 ### Variables
3777 # super
3778 set $mod Mod4
3779 # alt
3780 set $mod2 Mod1
3781 set $left h
3782 set $down j
3783 set $up k
3784 set $right l
3785 set $term urxvt
3786 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3787
3788 ### Output configuration
3789 #
3790 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3791 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3792 #
3793 # Example configuration:
3794 #
3795 # output HDMI-A-1 resolution 1920x1080 position 1920,0
3796 #
3797 # You can get the names of your outputs by running: swaymsg -t get_outputs
3798
3799 ### Idle configuration
3800
3801 exec swayidle \
3802 timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
3803 resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
3804 before-sleep swaylock
3805
3806
3807 ### Key bindings
3808 #
3809 # Basics:
3810 #
3811 # start a terminal
3812 bindsym $mod+Return exec $term
3813
3814 # kill focused window
3815 bindsym $mod+Shift+q kill
3816
3817 # start your launcher
3818 bindsym $mod+d exec $menu
3819
3820 # password manager
3821 bindsym $mod2+space exec rofi-pass
3822
3823 # Drag floating windows by holding down $mod and left mouse button.
3824 # Resize them with right mouse button + $mod.
3825 # Despite the name, also works for non-floating windows.
3826 # Change normal to inverse to use left mouse button for resizing and right
3827 # mouse button for dragging.
3828 floating_modifier $mod normal
3829
3830 # reload the configuration file
3831 bindsym $mod+Shift+c reload
3832
3833 # exit sway (logs you out of your wayland session)
3834 bindsym $mod+Shift+e exit
3835
3836 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3837 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3838 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3839
3840 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3841 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3842 bindsym XF86AudioMute exec pamixer --toggle-mute
3843 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3844
3845 # original sway workspace switch and window move
3846 bindsym $mod+bracketleft workspace prev
3847 bindsym $mod+bracketright workspace next
3848 bindsym $mod+braceleft move container to workspace prev
3849 bindsym $mod+braceright move container to workspace next
3850
3851 # bspwm-esque workspace switch and window move
3852 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3853 bindsym $mod2+bracketright exec sway-ws-util switch next
3854 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3855 bindsym $mod2+braceright exec sway-ws-util move next follow
3856 #
3857 # Moving around:
3858 #
3859 # Move your focus around
3860 bindsym $mod+$left focus left
3861 bindsym $mod+$down focus down
3862 bindsym $mod+$up focus up
3863 bindsym $mod+$right focus right
3864 # or use $mod+[up|down|left|right]
3865 bindsym $mod+Left focus left
3866 bindsym $mod+Down focus down
3867 bindsym $mod+Up focus up
3868 bindsym $mod+Right focus right
3869
3870 # _move_ the focused window with the same, but add Shift
3871 bindsym $mod+Shift+$left move left
3872 bindsym $mod+Shift+$down move down
3873 bindsym $mod+Shift+$up move up
3874 bindsym $mod+Shift+$right move right
3875 # ditto, with arrow keys
3876 bindsym $mod+Shift+Left move left
3877 bindsym $mod+Shift+Down move down
3878 bindsym $mod+Shift+Up move up
3879 bindsym $mod+Shift+Right move right
3880 #
3881 # Workspaces:
3882 #
3883 # switch to workspace
3884 bindsym $mod+1 workspace 1
3885 bindsym $mod+2 workspace 2
3886 bindsym $mod+3 workspace 3
3887 bindsym $mod+4 workspace 4
3888 bindsym $mod+5 workspace 5
3889 bindsym $mod+6 workspace 6
3890 bindsym $mod+7 workspace 7
3891 bindsym $mod+8 workspace 8
3892 bindsym $mod+9 workspace 9
3893 bindsym $mod+0 workspace 10
3894 # move focused container to workspace
3895 bindsym $mod+Shift+1 move container to workspace 1
3896 bindsym $mod+Shift+2 move container to workspace 2
3897 bindsym $mod+Shift+3 move container to workspace 3
3898 bindsym $mod+Shift+4 move container to workspace 4
3899 bindsym $mod+Shift+5 move container to workspace 5
3900 bindsym $mod+Shift+6 move container to workspace 6
3901 bindsym $mod+Shift+7 move container to workspace 7
3902 bindsym $mod+Shift+8 move container to workspace 8
3903 bindsym $mod+Shift+9 move container to workspace 9
3904 bindsym $mod+Shift+0 move container to workspace 10
3905 # Note: workspaces can have any name you want, not just numbers.
3906 # We just use 1-10 as the default.
3907 #
3908 # Layout stuff:
3909 #
3910 # You can "split" the current object of your focus with
3911 # $mod+b or $mod+v, for horizontal and vertical splits
3912 # respectively.
3913 bindsym $mod+b splith
3914 bindsym $mod+v splitv
3915
3916 # Switch the current container between different layout styles
3917 bindsym $mod+s layout stacking
3918 bindsym $mod+w layout tabbed
3919 bindsym $mod+e layout toggle split
3920
3921 # Make the current focus fullscreen
3922 bindsym $mod+f fullscreen
3923
3924 # Toggle the current focus between tiling and floating mode
3925 bindsym $mod+Shift+space floating toggle
3926
3927 # Swap focus between the tiling area and the floating area
3928 bindsym $mod+space focus mode_toggle
3929
3930 # move focus to the parent container
3931 bindsym $mod+a focus parent
3932 #
3933 # Scratchpad:
3934 #
3935 # Sway has a "scratchpad", which is a bag of holding for windows.
3936 # You can send windows there and get them back later.
3937
3938 # Move the currently focused window to the scratchpad
3939 bindsym $mod+Shift+minus move scratchpad
3940
3941 # Show the next scratchpad window or hide the focused scratchpad window.
3942 # If there are multiple scratchpad windows, this command cycles through them.
3943 bindsym $mod+minus scratchpad show
3944 #
3945 # Resizing containers:
3946 #
3947 mode "resize" {
3948 # left will shrink the containers width
3949 # right will grow the containers width
3950 # up will shrink the containers height
3951 # down will grow the containers height
3952 bindsym $left resize shrink width 10px
3953 bindsym $down resize grow height 10px
3954 bindsym $up resize shrink height 10px
3955 bindsym $right resize grow width 10px
3956
3957 # ditto, with arrow keys
3958 bindsym Left resize shrink width 10px
3959 bindsym Down resize grow height 10px
3960 bindsym Up resize shrink height 10px
3961 bindsym Right resize grow width 10px
3962
3963 # return to default mode
3964 bindsym Return mode "default"
3965 bindsym Escape mode "default"
3966 }
3967 bindsym $mod+Shift+r mode "resize"
3968
3969 #
3970 # Power button
3971 #
3972
3973 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
3974 mode "$mode_system" {
3975 bindsym l exec swaylock, mode "default"
3976 bindsym e exec swaymsg exit, mode "default"
3977 bindsym s exec systemctl suspend, mode "default"
3978 bindsym h exec systemctl hibernate, mode "default"
3979 bindsym r exec systemctl reboot, mode "default"
3980 bindsym Shift+s exec systemctl poweroff -i, mode "default"
3981
3982 # back to normal: Enter, Escape, or q
3983 bindsym Return mode "default"
3984 bindsym Escape mode "default"
3985 bindsym q mode "default"
3986 }
3987 bindsym XF86PowerOff mode "$mode_system"
3988
3989 #
3990 # Presentation mode
3991 #
3992
3993 bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
3994
3995 #
3996 # Notifications
3997 #
3998
3999 bindsym $mod+Shift+n mode notifications
4000 mode notifications {
4001 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
4002 bindsym d exec makoctl dismiss; mode default
4003 bindsym Shift+d exec makoctl dismiss -a; mode default
4004
4005 bindsym Escape mode default
4006 bindsym q mode default
4007 }
4008
4009 #
4010 # Screenshotting
4011 #
4012
4013 bindsym $mod+Shift+s mode screenshot
4014 mode screenshot {
4015 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4016 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4017
4018 bindsym Escape mode default
4019 bindsym q mode default
4020 }
4021
4022 #
4023 # Status Bar:
4024 #
4025 # Read `man 5 sway-bar` for more information about this section.
4026 bar {
4027 position bottom
4028 colors {
4029 statusline #ffffff
4030 background #323232
4031 inactive_workspace #32323200 #32323200 #5c5c5c
4032 }
4033 status_command i3status | my-i3status.py
4034 }
4035
4036 # font pango: benis uushi 9
4037 # font pango: Ubuntu Mono 11
4038 # font pango: Inconsolata 11
4039 font pango: DejaVu Sans Mono 9
4040 # font pango: Liberation Mono 9
4041
4042 exec xrdb .Xresources
4043 exec pgrep -x "systemd-inhibit" || \
4044 systemd-inhibit --what=handle-power-key --who=aminb \
4045 --why="Handle power button in sway" sleep infinity
4046 exec mako 2>&1 >/tmp/mako.log
4047 exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4048
4049 include /etc/sway/config.d/*
4050 include ~/.config/sway/`hostname`
4051
4052 exec systemd-notify --ready || true
4053
4054 #+end_src
4055
4056 *** langa
4057 :PROPERTIES:
4058 :header-args+: :tangle ~/.config/sway/langa
4059 :END:
4060
4061 #+begin_src conf
4062 input "2:7:SynPS/2_Synaptics_TouchPad" {
4063 events disabled
4064 dwt enabled
4065 tap enabled
4066 natural_scroll enabled
4067 click_method clickfinger
4068 }
4069
4070 input "1:1:AT_Translated_Set_2_keyboard" {
4071 repeat_delay 200
4072 repeat_rate 45
4073 xkb_layout us_ab,ir
4074 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4075 }
4076 #+end_src
4077
4078 *** shemshak
4079 :PROPERTIES:
4080 :header-args+: :tangle ~/.config/sway/shemshak
4081 :END:
4082
4083 #+begin_src conf
4084 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4085 dwt enabled
4086 tap enabled
4087 natural_scroll enabled
4088 middle_emulation enabled
4089 click_method clickfinger
4090 }
4091
4092 input "1:1:AT_Translated_Set_2_keyboard" {
4093 repeat_delay 200
4094 repeat_rate 45
4095 xkb_layout us,ir
4096 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4097 }
4098 #+end_src
4099 ** swaylock
4100 :PROPERTIES:
4101 :header-args+: :tangle ~/.config/swaylock/config
4102 :END:
4103
4104 #+begin_src conf
4105 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4106 scaling=fill
4107 #+end_src
4108
4109 ** TLP
4110
4111 *** langa
4112
4113 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4114 # ------------------------------------------------------------------------------
4115 # tlp - Parameters for power saving
4116 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4117
4118 # Hint: some features are disabled by default, remove the leading # to enable
4119 # them.
4120
4121 # Set to 0 to disable, 1 to enable TLP.
4122 TLP_ENABLE=1
4123
4124 # Operation mode when no power supply can be detected: AC, BAT.
4125 # Concerns some desktop and embedded hardware only.
4126 TLP_DEFAULT_MODE=AC
4127
4128 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4129 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4130 TLP_PERSISTENT_DEFAULT=0
4131
4132 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4133 # Non-zero value enables, zero disables laptop mode.
4134 DISK_IDLE_SECS_ON_AC=0
4135 DISK_IDLE_SECS_ON_BAT=2
4136
4137 # Dirty page values (timeouts in secs).
4138 MAX_LOST_WORK_SECS_ON_AC=15
4139 MAX_LOST_WORK_SECS_ON_BAT=60
4140
4141 # Hint: CPU parameters below are disabled by default, remove the leading #
4142 # to enable them, otherwise kernel default values are used.
4143
4144 # Select a CPU frequency scaling governor.
4145 # Intel Core i processor with intel_pstate driver:
4146 # powersave(*), performance.
4147 # Older hardware with acpi-cpufreq driver:
4148 # ondemand(*), powersave, performance, conservative, schedutil.
4149 # (*) is recommended.
4150 # Hint: use tlp-stat -p to show the active driver and available governors.
4151 # Important:
4152 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
4153 # efficient for *almost all* workloads and therefore kernel and most
4154 # distributions have chosen them as defaults. If you still want to change,
4155 # you should know what you're doing! You *must* disable your distribution's
4156 # governor settings or conflicts will occur.
4157 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4158 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4159
4160 # Set the min/max frequency available for the scaling governor.
4161 # Possible values strongly depend on your CPU. For available frequencies see
4162 # the output of tlp-stat -p.
4163 #CPU_SCALING_MIN_FREQ_ON_AC=0
4164 #CPU_SCALING_MAX_FREQ_ON_AC=0
4165 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4166 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4167
4168 # Set energy performance hints (HWP) for Intel P-state governor:
4169 # performance, balance_performance, default, balance_power, power
4170 # Values are given in order of increasing power saving.
4171 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4172 CPU_HWP_ON_AC=balance_performance
4173 CPU_HWP_ON_BAT=balance_power
4174
4175 # Set Intel P-state performance: 0..100 (%).
4176 # Limit the max/min P-state to control the power dissipation of the CPU.
4177 # Values are stated as a percentage of the available performance.
4178 # Requires an Intel Core i processor with intel_pstate driver.
4179 #CPU_MIN_PERF_ON_AC=0
4180 #CPU_MAX_PERF_ON_AC=100
4181 #CPU_MIN_PERF_ON_BAT=0
4182 #CPU_MAX_PERF_ON_BAT=30
4183
4184 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4185 # Requires an Intel Core i processor.
4186 # Important:
4187 # - This may conflict with your distribution's governor settings
4188 # - A value of 1 does *not* activate boosting, it just allows it
4189 #CPU_BOOST_ON_AC=1
4190 #CPU_BOOST_ON_BAT=0
4191
4192 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4193 # 0=disable, 1=enable.
4194 SCHED_POWERSAVE_ON_AC=0
4195 SCHED_POWERSAVE_ON_BAT=1
4196
4197 # Kernel NMI Watchdog:
4198 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
4199 NMI_WATCHDOG=0
4200
4201 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4202 # Frequency voltage pairs are written to:
4203 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4204 # CAUTION: only use this, if you thoroughly understand what you are doing!
4205 #PHC_CONTROLS="F:V F:V F:V F:V"
4206
4207 # Set CPU performance versus energy savings policy:
4208 # performance, balance-performance, default, balance-power, power.
4209 # Values are given in order of increasing power saving.
4210 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4211 ENERGY_PERF_POLICY_ON_AC=performance
4212 ENERGY_PERF_POLICY_ON_BAT=balance-power
4213
4214 # Disk devices; separate multiple devices with spaces (default: sda).
4215 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4216 DISK_DEVICES="sda sdb"
4217
4218 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4219 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4220 # Separate values for multiple disks with spaces. Use the special value 'keep'
4221 # to keep the hardware default for the particular disk.
4222 DISK_APM_LEVEL_ON_AC="254 254"
4223 DISK_APM_LEVEL_ON_BAT="128 128"
4224
4225 # Hard disk spin down timeout:
4226 # 0: spin down disabled
4227 # 1..240: timeouts from 5s to 20min (in units of 5s)
4228 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4229 # See 'man hdparm' for details.
4230 # Separate values for multiple disks with spaces. Use the special value 'keep'
4231 # to keep the hardware default for the particular disk.
4232 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4233 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4234
4235 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4236 # Separate values for multiple disks with spaces. Use the special value 'keep'
4237 # to keep the kernel default scheduler for the particular disk.
4238 #DISK_IOSCHED="cfq cfq"
4239
4240 # AHCI link power management (ALPM) for disk devices:
4241 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4242 # (*) Kernel >= 4.15 required, then recommended.
4243 # Multiple values separated with spaces are tried sequentially until success.
4244 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4245 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4246
4247 # Exclude host devices from AHCI link power management.
4248 # Separate multiple hosts with spaces.
4249 #SATA_LINKPWR_BLACKLIST="host1"
4250
4251 # Runtime Power Management for AHCI host and disks devices:
4252 # on=disable, auto=enable.
4253 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4254 #AHCI_RUNTIME_PM_ON_AC=on
4255 #AHCI_RUNTIME_PM_ON_BAT=on
4256
4257 # Seconds of inactivity before disk is suspended.
4258 AHCI_RUNTIME_PM_TIMEOUT=15
4259
4260 # PCI Express Active State Power Management (PCIe ASPM):
4261 # default, performance, powersave.
4262 PCIE_ASPM_ON_AC=performance
4263 PCIE_ASPM_ON_BAT=powersave
4264
4265 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4266 # auto = mid on BAT, high on AC; default = use hardware defaults.
4267 RADEON_POWER_PROFILE_ON_AC=high
4268 RADEON_POWER_PROFILE_ON_BAT=low
4269
4270 # Radeon dynamic power management method (DPM): battery, performance.
4271 RADEON_DPM_STATE_ON_AC=performance
4272 RADEON_DPM_STATE_ON_BAT=battery
4273
4274 # Radeon DPM performance level: auto, low, high; auto is recommended.
4275 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4276 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4277
4278 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4279 WIFI_PWR_ON_AC=off
4280 WIFI_PWR_ON_BAT=on
4281
4282 # Disable wake on LAN: Y/N.
4283 WOL_DISABLE=Y
4284
4285 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4286 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4287 SOUND_POWER_SAVE_ON_AC=0
4288 SOUND_POWER_SAVE_ON_BAT=0
4289
4290 # Disable controller too (HDA only): Y/N.
4291 SOUND_POWER_SAVE_CONTROLLER=N
4292
4293 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4294 # Drive can be powered on again by releasing (and reinserting) the eject lever
4295 # or by pressing the disc eject button on newer models.
4296 # Note: an UltraBay/MediaBay hard disk is never powered off.
4297 BAY_POWEROFF_ON_AC=0
4298 BAY_POWEROFF_ON_BAT=0
4299 # Optical drive device to power off (default sr0).
4300 BAY_DEVICE="sr0"
4301
4302 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4303 RUNTIME_PM_ON_AC=on
4304 RUNTIME_PM_ON_BAT=auto
4305
4306 # Exclude PCI(e) device adresses the following list from Runtime PM
4307 # (separate with spaces). Use lspci to get the adresses (1st column).
4308 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4309
4310 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4311 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4312 # prevents accidential power-on of dGPU in hybrid graphics setups.
4313 # Use "" to disable the feature completely.
4314 # Separate multiple drivers with spaces.
4315 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4316
4317 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4318 USB_AUTOSUSPEND=1
4319
4320 # Exclude listed devices from USB autosuspend (separate with spaces).
4321 # Use lsusb to get the ids.
4322 # Note: input devices (usbhid) are excluded automatically
4323 #USB_BLACKLIST="1111:2222 3333:4444"
4324
4325 # Bluetooth devices are excluded from USB autosuspend:
4326 # 0=do not exclude, 1=exclude.
4327 USB_BLACKLIST_BTUSB=0
4328
4329 # Phone devices are excluded from USB autosuspend:
4330 # 0=do not exclude, 1=exclude (enable charging).
4331 USB_BLACKLIST_PHONE=0
4332
4333 # Printers are excluded from USB autosuspend:
4334 # 0=do not exclude, 1=exclude.
4335 USB_BLACKLIST_PRINTER=1
4336
4337 # WWAN devices are excluded from USB autosuspend:
4338 # 0=do not exclude, 1=exclude.
4339 USB_BLACKLIST_WWAN=1
4340
4341 # Include listed devices into USB autosuspend even if already excluded
4342 # by the blacklists above (separate with spaces).
4343 # Use lsusb to get the ids.
4344 #USB_WHITELIST="1111:2222 3333:4444"
4345
4346 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4347 # (workaround for USB devices that cause shutdown problems).
4348 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4349
4350 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4351 # on system startup: 0=disable, 1=enable.
4352 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4353 # are ignored when this is enabled!
4354 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4355 RESTORE_DEVICE_STATE_ON_STARTUP=0
4356
4357 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4358 # Separate multiple devices with spaces.
4359 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4360 DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
4361
4362 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4363 # Separate multiple devices with spaces.
4364 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4365
4366 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4367 # (workaround for devices that are blocking shutdown).
4368 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4369
4370 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4371 # (to prevent other operating systems from missing radios).
4372 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4373
4374 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4375 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4376
4377 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4378 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4379
4380 # Radio devices to disable on battery when not in use (not connected):
4381 # bluetooth, wifi, wwan.
4382 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4383
4384 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4385 # required). Charging starts when the remaining capacity falls below the
4386 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4387 # Main / Internal battery (values in %)
4388 #START_CHARGE_THRESH_BAT0=75
4389 #STOP_CHARGE_THRESH_BAT0=80
4390 # Ultrabay / Slice / Replaceable battery (values in %)
4391 #START_CHARGE_THRESH_BAT1=75
4392 #STOP_CHARGE_THRESH_BAT1=80
4393
4394 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4395 #RESTORE_THRESHOLDS_ON_BAT=1
4396
4397 # ------------------------------------------------------------------------------
4398 # tlp-rdw - Parameters for the radio device wizard
4399 # Possible devices: bluetooth, wifi, wwan.
4400
4401 # Hints:
4402 # - Parameters are disabled by default, remove the leading # to enable them
4403 # - Separate multiple radio devices with spaces
4404
4405 # Radio devices to disable on connect.
4406 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4407 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4408 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4409
4410 # Radio devices to enable on disconnect.
4411 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4412 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4413 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4414
4415 # Radio devices to enable/disable when docked.
4416 #DEVICES_TO_ENABLE_ON_DOCK=""
4417 #DEVICES_TO_DISABLE_ON_DOCK=""
4418
4419 # Radio devices to enable/disable when undocked.
4420 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4421 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4422 #+end_src
4423
4424 *** shemshak
4425
4426 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
4427 # ------------------------------------------------------------------------------
4428 # tlp - Parameters for power saving
4429 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4430
4431 # Hint: some features are disabled by default, remove the leading # to enable
4432 # them.
4433
4434 # Set to 0 to disable, 1 to enable TLP.
4435 TLP_ENABLE=1
4436
4437 # Operation mode when no power supply can be detected: AC, BAT.
4438 # Concerns some desktop and embedded hardware only.
4439 TLP_DEFAULT_MODE=AC
4440
4441 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4442 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4443 TLP_PERSISTENT_DEFAULT=0
4444
4445 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4446 # Non-zero value enables, zero disables laptop mode.
4447 DISK_IDLE_SECS_ON_AC=0
4448 DISK_IDLE_SECS_ON_BAT=2
4449
4450 # Dirty page values (timeouts in secs).
4451 MAX_LOST_WORK_SECS_ON_AC=15
4452 MAX_LOST_WORK_SECS_ON_BAT=60
4453
4454 # Hint: CPU parameters below are disabled by default, remove the leading #
4455 # to enable them, otherwise kernel default values are used.
4456
4457 # Select a CPU frequency scaling governor.
4458 # Intel Core i processor with intel_pstate driver:
4459 # powersave(*), performance.
4460 # Older hardware with acpi-cpufreq driver:
4461 # ondemand(*), powersave, performance, conservative, schedutil.
4462 # (*) is recommended.
4463 # Hint: use tlp-stat -p to show the active driver and available governors.
4464 # Important:
4465 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
4466 # efficient for *almost all* workloads and therefore kernel and most
4467 # distributions have chosen them as defaults. If you still want to change,
4468 # you should know what you're doing! You *must* disable your distribution's
4469 # governor settings or conflicts will occur.
4470 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4471 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4472
4473 # Set the min/max frequency available for the scaling governor.
4474 # Possible values strongly depend on your CPU. For available frequencies see
4475 # the output of tlp-stat -p.
4476 #CPU_SCALING_MIN_FREQ_ON_AC=0
4477 #CPU_SCALING_MAX_FREQ_ON_AC=0
4478 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4479 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4480
4481 # Set energy performance hints (HWP) for Intel P-state governor:
4482 # performance, balance_performance, default, balance_power, power
4483 # Values are given in order of increasing power saving.
4484 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4485 CPU_HWP_ON_AC=balance_performance
4486 CPU_HWP_ON_BAT=balance_power
4487
4488 # Set Intel P-state performance: 0..100 (%).
4489 # Limit the max/min P-state to control the power dissipation of the CPU.
4490 # Values are stated as a percentage of the available performance.
4491 # Requires an Intel Core i processor with intel_pstate driver.
4492 #CPU_MIN_PERF_ON_AC=0
4493 #CPU_MAX_PERF_ON_AC=100
4494 #CPU_MIN_PERF_ON_BAT=0
4495 #CPU_MAX_PERF_ON_BAT=30
4496
4497 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4498 # Requires an Intel Core i processor.
4499 # Important:
4500 # - This may conflict with your distribution's governor settings
4501 # - A value of 1 does *not* activate boosting, it just allows it
4502 #CPU_BOOST_ON_AC=1
4503 #CPU_BOOST_ON_BAT=0
4504
4505 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4506 # 0=disable, 1=enable.
4507 SCHED_POWERSAVE_ON_AC=0
4508 SCHED_POWERSAVE_ON_BAT=1
4509
4510 # Kernel NMI Watchdog:
4511 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
4512 NMI_WATCHDOG=0
4513
4514 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4515 # Frequency voltage pairs are written to:
4516 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4517 # CAUTION: only use this, if you thoroughly understand what you are doing!
4518 #PHC_CONTROLS="F:V F:V F:V F:V"
4519
4520 # Set CPU performance versus energy savings policy:
4521 # performance, balance-performance, default, balance-power, power.
4522 # Values are given in order of increasing power saving.
4523 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4524 ENERGY_PERF_POLICY_ON_AC=performance
4525 ENERGY_PERF_POLICY_ON_BAT=balance-power
4526
4527 # Disk devices; separate multiple devices with spaces (default: sda).
4528 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4529 DISK_DEVICES="sda sdb"
4530
4531 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4532 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4533 # Separate values for multiple disks with spaces. Use the special value 'keep'
4534 # to keep the hardware default for the particular disk.
4535 DISK_APM_LEVEL_ON_AC="254 254"
4536 DISK_APM_LEVEL_ON_BAT="128 128"
4537
4538 # Hard disk spin down timeout:
4539 # 0: spin down disabled
4540 # 1..240: timeouts from 5s to 20min (in units of 5s)
4541 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4542 # See 'man hdparm' for details.
4543 # Separate values for multiple disks with spaces. Use the special value 'keep'
4544 # to keep the hardware default for the particular disk.
4545 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4546 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4547
4548 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4549 # Separate values for multiple disks with spaces. Use the special value 'keep'
4550 # to keep the kernel default scheduler for the particular disk.
4551 #DISK_IOSCHED="cfq cfq"
4552
4553 # AHCI link power management (ALPM) for disk devices:
4554 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4555 # (*) Kernel >= 4.15 required, then recommended.
4556 # Multiple values separated with spaces are tried sequentially until success.
4557 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4558 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4559
4560 # Exclude host devices from AHCI link power management.
4561 # Separate multiple hosts with spaces.
4562 #SATA_LINKPWR_BLACKLIST="host1"
4563
4564 # Runtime Power Management for AHCI host and disks devices:
4565 # on=disable, auto=enable.
4566 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4567 #AHCI_RUNTIME_PM_ON_AC=on
4568 #AHCI_RUNTIME_PM_ON_BAT=on
4569
4570 # Seconds of inactivity before disk is suspended.
4571 AHCI_RUNTIME_PM_TIMEOUT=15
4572
4573 # PCI Express Active State Power Management (PCIe ASPM):
4574 # default, performance, powersave.
4575 PCIE_ASPM_ON_AC=performance
4576 PCIE_ASPM_ON_BAT=powersave
4577
4578 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4579 # auto = mid on BAT, high on AC; default = use hardware defaults.
4580 RADEON_POWER_PROFILE_ON_AC=high
4581 RADEON_POWER_PROFILE_ON_BAT=low
4582
4583 # Radeon dynamic power management method (DPM): battery, performance.
4584 RADEON_DPM_STATE_ON_AC=performance
4585 RADEON_DPM_STATE_ON_BAT=battery
4586
4587 # Radeon DPM performance level: auto, low, high; auto is recommended.
4588 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4589 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4590
4591 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4592 WIFI_PWR_ON_AC=off
4593 WIFI_PWR_ON_BAT=on
4594
4595 # Disable wake on LAN: Y/N.
4596 WOL_DISABLE=Y
4597
4598 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4599 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4600 SOUND_POWER_SAVE_ON_AC=0
4601 SOUND_POWER_SAVE_ON_BAT=0
4602
4603 # Disable controller too (HDA only): Y/N.
4604 SOUND_POWER_SAVE_CONTROLLER=N
4605
4606 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4607 # Drive can be powered on again by releasing (and reinserting) the eject lever
4608 # or by pressing the disc eject button on newer models.
4609 # Note: an UltraBay/MediaBay hard disk is never powered off.
4610 BAY_POWEROFF_ON_AC=0
4611 BAY_POWEROFF_ON_BAT=0
4612 # Optical drive device to power off (default sr0).
4613 BAY_DEVICE="sr0"
4614
4615 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4616 RUNTIME_PM_ON_AC=on
4617 RUNTIME_PM_ON_BAT=auto
4618
4619 # Exclude PCI(e) device adresses the following list from Runtime PM
4620 # (separate with spaces). Use lspci to get the adresses (1st column).
4621 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4622 RUNTIME_PM_BLACKLIST="01:00.0"
4623
4624 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4625 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4626 # prevents accidential power-on of dGPU in hybrid graphics setups.
4627 # Use "" to disable the feature completely.
4628 # Separate multiple drivers with spaces.
4629 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4630
4631 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4632 USB_AUTOSUSPEND=1
4633
4634 # Exclude listed devices from USB autosuspend (separate with spaces).
4635 # Use lsusb to get the ids.
4636 # Note: input devices (usbhid) are excluded automatically
4637 #USB_BLACKLIST="1111:2222 3333:4444"
4638
4639 # Bluetooth devices are excluded from USB autosuspend:
4640 # 0=do not exclude, 1=exclude.
4641 USB_BLACKLIST_BTUSB=0
4642
4643 # Phone devices are excluded from USB autosuspend:
4644 # 0=do not exclude, 1=exclude (enable charging).
4645 USB_BLACKLIST_PHONE=0
4646
4647 # Printers are excluded from USB autosuspend:
4648 # 0=do not exclude, 1=exclude.
4649 USB_BLACKLIST_PRINTER=1
4650
4651 # WWAN devices are excluded from USB autosuspend:
4652 # 0=do not exclude, 1=exclude.
4653 USB_BLACKLIST_WWAN=1
4654
4655 # Include listed devices into USB autosuspend even if already excluded
4656 # by the blacklists above (separate with spaces).
4657 # Use lsusb to get the ids.
4658 #USB_WHITELIST="1111:2222 3333:4444"
4659
4660 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4661 # (workaround for USB devices that cause shutdown problems).
4662 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4663
4664 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4665 # on system startup: 0=disable, 1=enable.
4666 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4667 # are ignored when this is enabled!
4668 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4669 RESTORE_DEVICE_STATE_ON_STARTUP=1
4670
4671 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4672 # Separate multiple devices with spaces.
4673 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4674
4675 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4676 # Separate multiple devices with spaces.
4677 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4678
4679 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4680 # (workaround for devices that are blocking shutdown).
4681 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4682
4683 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4684 # (to prevent other operating systems from missing radios).
4685 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4686
4687 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4688 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4689
4690 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4691 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4692
4693 # Radio devices to disable on battery when not in use (not connected):
4694 # bluetooth, wifi, wwan.
4695 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4696
4697 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4698 # required). Charging starts when the remaining capacity falls below the
4699 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4700 # Main / Internal battery (values in %)
4701 #START_CHARGE_THRESH_BAT0=75
4702 #STOP_CHARGE_THRESH_BAT0=80
4703 # Ultrabay / Slice / Replaceable battery (values in %)
4704 #START_CHARGE_THRESH_BAT1=75
4705 #STOP_CHARGE_THRESH_BAT1=80
4706
4707 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4708 #RESTORE_THRESHOLDS_ON_BAT=1
4709
4710 # ------------------------------------------------------------------------------
4711 # tlp-rdw - Parameters for the radio device wizard
4712 # Possible devices: bluetooth, wifi, wwan.
4713
4714 # Hints:
4715 # - Parameters are disabled by default, remove the leading # to enable them
4716 # - Separate multiple radio devices with spaces
4717
4718 # Radio devices to disable on connect.
4719 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4720 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4721 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4722
4723 # Radio devices to enable on disconnect.
4724 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4725 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4726 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4727
4728 # Radio devices to enable/disable when docked.
4729 #DEVICES_TO_ENABLE_ON_DOCK=""
4730 #DEVICES_TO_DISABLE_ON_DOCK=""
4731
4732 # Radio devices to enable/disable when undocked.
4733 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4734 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4735 #+end_src
4736
4737 ** X
4738
4739 *** xprofile
4740 :PROPERTIES:
4741 :header-args+: :tangle ~/.xprofile
4742 :END:
4743
4744 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4745 contrary, it's automatically sourced by LightDM, my display manager of
4746 choice.
4747
4748 #+begin_src sh :tangle no
4749 xset -b # disable bell
4750 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4751
4752 # setxkbmap -option compose:ralt
4753
4754 setxkbmap -option ctrl:nocaps # turn capslock into control
4755 setxkbmap -option altwin:swap_alt_win # swap alt and super
4756
4757 if [ $(hostname) = "plasma" ]
4758 then
4759 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4760 fi
4761
4762 if [ $(hostname) = "enigma" ]
4763 then
4764 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4765 fi
4766
4767 light -Scrs "intel_backlight" 2
4768
4769 source $HOME/.zprofile
4770
4771 export _JAVA_AWT_WM_NONREPARENTING=1
4772 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4773
4774 if [ $(hostname) = "plasma" ]
4775 then
4776 unlock-def-gk.py &
4777 fi
4778
4779 bspwm &
4780 #+end_src
4781
4782 *** X resources
4783
4784 **** Xresources
4785 :PROPERTIES:
4786 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4787 :END:
4788
4789 #+begin_src conf-xdefaults
4790 #include ".Xresources.d/fonts"
4791 ! #include ".Xresources.d/colors"
4792 #include ".Xresources.d/emacs"
4793 #include ".Xresources.d/rxvt-unicode"
4794 #+end_src
4795
4796 **** Xresources.d
4797
4798 ***** fonts
4799 :PROPERTIES:
4800 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4801 :END:
4802
4803 #+begin_src conf-xdefaults
4804 Xft.lcdfilter: lcddefault
4805 Xft.antialias: true
4806 Xft.autohint: 0
4807 Xft.hinting: true
4808 Xft.hintstyle: hintslight
4809 ! Xft.hintstyle: hintfull
4810 Xft.rgba: rgb
4811 Xft.dpi: 96
4812 #+end_src
4813
4814 ***** colors
4815 :PROPERTIES:
4816 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4817 :END:
4818
4819 #+begin_src conf-xdefaults :tangle no
4820 #include "gruvbox-light.xresources"
4821 ! #include "gruvbox-dark.xresources"
4822 #include "gruvbox-urxvt256.xresources"
4823 #+end_src
4824
4825 #+begin_src conf-xdefaults :tangle no
4826 ! -----------------------------------------------------------------------------
4827 ! File: gruvbox-light.xresources
4828 ! Description: Retro groove colorscheme generalized
4829 ! Author: morhetz <morhetz@gmail.com>
4830 ! Source: https://github.com/morhetz/gruvbox-generalized
4831 ! Last Modified: 6 Sep 2014
4832 ! -----------------------------------------------------------------------------
4833
4834 ! hard contrast: *background: #f9f5d7
4835 *background: #fbf1c7
4836 ! soft contrast: *background: #f2e5bc
4837 *foreground: #3c3836
4838 ! Black + DarkGrey
4839 *color0: #fdf4c1
4840 *color8: #928374
4841 ! DarkRed + Red
4842 *color1: #cc241d
4843 *color9: #9d0006
4844 ! DarkGreen + Green
4845 *color2: #98971a
4846 *color10: #79740e
4847 ! DarkYellow + Yellow
4848 *color3: #d79921
4849 *color11: #b57614
4850 ! DarkBlue + Blue
4851 *color4: #458588
4852 *color12: #076678
4853 ! DarkMagenta + Magenta
4854 *color5: #b16286
4855 *color13: #8f3f71
4856 ! DarkCyan + Cyan
4857 *color6: #689d6a
4858 *color14: #427b58
4859 ! LightGrey + White
4860 *color7: #7c6f64
4861 *color15: #3c3836
4862 #+end_src
4863
4864 #+begin_src conf-xdefaults :tangle no
4865 ! -----------------------------------------------------------------------------
4866 ! File: gruvbox-dark.xresources
4867 ! Description: Retro groove colorscheme generalized
4868 ! Author: morhetz <morhetz@gmail.com>
4869 ! Source: https://github.com/morhetz/gruvbox-generalized
4870 ! Last Modified: 6 Sep 2014
4871 ! -----------------------------------------------------------------------------
4872
4873 ! hard contrast: *background: #1d2021
4874 *background: #282828
4875 ! soft contrast: *background: #32302f
4876 *foreground: #ebdbb2
4877 ! Black + DarkGrey
4878 *color0: #282828
4879 *color8: #928374
4880 ! DarkRed + Red
4881 *color1: #cc241d
4882 *color9: #fb4934
4883 ! DarkGreen + Green
4884 *color2: #98971a
4885 *color10: #b8bb26
4886 ! DarkYellow + Yellow
4887 *color3: #d79921
4888 *color11: #fabd2f
4889 ! DarkBlue + Blue
4890 *color4: #458588
4891 *color12: #83a598
4892 ! DarkMagenta + Magenta
4893 *color5: #b16286
4894 *color13: #d3869b
4895 ! DarkCyan + Cyan
4896 *color6: #689d6a
4897 *color14: #8ec07c
4898 ! LightGrey + White
4899 *color7: #a89984
4900 *color15: #ebdbb2
4901 #+end_src
4902
4903 #+begin_src conf-xdefaults :tangle no
4904 ! -----------------------------------------------------------------------------
4905 ! File: gruvbox-urxvt256.xresources
4906 ! Description: Retro groove colorscheme generalized
4907 ! Author: morhetz <morhetz@gmail.com>
4908 ! Source: https://github.com/morhetz/gruvbox-generalized
4909 ! Last Modified: 13 Dec 2013
4910 ! -----------------------------------------------------------------------------
4911
4912 URxvt.color24: #076678
4913 URxvt.color66: #427b58
4914 URxvt.color88: #9d0006
4915 URxvt.color96: #8f3f71
4916 URxvt.color100: #79740e
4917 URxvt.color108: #8ec07c
4918 URxvt.color109: #83a598
4919 URxvt.color130: #af3a03
4920 URxvt.color136: #b57614
4921 URxvt.color142: #b8bb26
4922 URxvt.color167: #fb4934
4923 URxvt.color175: #d3869b
4924 URxvt.color208: #fe8019
4925 URxvt.color214: #fabd2f
4926 URxvt.color223: #ebdbb2
4927 URxvt.color228: #f2e5bc
4928 URxvt.color229: #fbf1c7
4929 URxvt.color230: #f9f5d7
4930 URxvt.color234: #1d2021
4931 URxvt.color235: #282828
4932 URxvt.color236: #32302f
4933 URxvt.color237: #3c3836
4934 URxvt.color239: #504945
4935 URxvt.color241: #665c54
4936 URxvt.color243: #7c6f64
4937 URxvt.color244: #928374
4938 URxvt.color245: #928374
4939 URxvt.color246: #a89984
4940 URxvt.color248: #bdae93
4941 URxvt.color250: #d5c4a1
4942 #+end_src
4943
4944 ***** emacs
4945 :PROPERTIES:
4946 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4947 :END:
4948
4949 #+begin_src conf-xdefaults
4950 Emacs.menuBar: off
4951 Emacs.toolBar: off
4952 Emacs.verticalScrollBars: off
4953 Emacs.cursorBlink: off
4954 Emacs.FontBackend: xft,x
4955 ! Emacs.font: Ubuntu Mono-12
4956 ! Emacs.font: Triplicate T4C-11
4957 ! Emacs.font: Ubuntu Mono-10.5
4958 ! Emacs.font: Ubuntu Mono-12
4959 ! Emacs.font: Iosevka-11
4960
4961 ! Emacs.font: Fira Mono:size=15
4962 ! Emacs.font: DejaVu Sans Mono:size=15
4963 ! Emacs.font: Inconsolata:size=17
4964 ! Emacs.font: Inconsolata:size=16
4965 ! Emacs.font: Inconsolata LGC:size=14
4966 ! Emacs.font: Source Code Pro Medium-10.5
4967 Emacs.font: Source Code Pro:size=14
4968 ! Emacs.font: Ubuntu Mono:size=16
4969 ! Emacs.font: Iosevka:size=16
4970 #+end_src
4971
4972 ***** rxvt-unicode
4973 :PROPERTIES:
4974 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4975 :END:
4976
4977 #+begin_src conf-xdefaults
4978 ! Font
4979 URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4980 URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4981 URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4982 URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4983
4984 URxvt.xftAntialias: true
4985 URxvt.letterSpace: 0
4986
4987 URxvt.depth: 0
4988 URxvt.loginShell: true
4989 URxvt.saveLines: 100000
4990 URxvt.internalBorder: 3
4991 URxvt.lineSpace: 0
4992 URxvt.scrollBar: false
4993 URxvt.scrollStyle: rxvt
4994 URxvt*scrollTtyOutput: false
4995 URxvt*scrollWithBuffer: true
4996 URxvt*scrollTtyKeypress: true
4997 URxvt.keysym.Shift-Up: command:\033]720;1\007
4998 URxvt.keysym.Shift-Down: command:\033]721;1\007
4999
5000 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
5001 URxvt.url-select.launcher: firefox
5002 URxvt.url-select.underline: true
5003 URxvt.keysym.M-u: perl:url-select:select_next
5004 URxvt.keysym.M-Escape: perl:keyboard-select:activate
5005 URxvt.keysym.M-s: perl:keyboard-select:search
5006 URxvt.url-launcher: /usr/bin/firefox
5007 URxvt.matcher.button: 1
5008 URxvt.iso14755: false
5009 URxvt.iso14755_53: false
5010 URxvt.keysym.M-c: perl:clipboard:copy
5011 URxvt.keysym.M-v: perl:clipboard:paste
5012 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
5013 URxvt.keysym.C-Up: font-size:increase
5014 URxvt.keysym.C-Down: font-size:decrease
5015 URxvt.keysym.C-S-Up: font-size:incglobal
5016 URxvt.keysym.C-S-Down: font-size:decglobal
5017 URxvt.keysym.C-equal: font-size:reset
5018 !URxvt.keysym.C-question: font-size:show
5019
5020 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5021
5022 !urxvt*foreground: white
5023 !urxvt*background: black
5024
5025 !*color0: #2E3436
5026 !*color1: #a40000
5027 !*color2: #4E9A06
5028 !*color3: #C4A000
5029 !*color4: #3465A4
5030 !*color5: #75507B
5031 !*color6: #ce5c00
5032 !*color7: #babdb9
5033 !*color8: #555753
5034 !*color9: #EF2929
5035 !*color10: #8AE234
5036 !*color11: #FCE94F
5037 !*color12: #729FCF
5038 !*color13: #AD7FA8
5039 !*color14: #fcaf3e
5040 !*color15: #EEEEEC
5041
5042 !URxvt.foreground: #C8C8C8
5043 !URxvt.background: #FFFFFF
5044
5045 !! black
5046 !*color0: #2E3436
5047 !*color8: #555753
5048 !! red
5049 !*color1: #a40000
5050 !*color9: #EF2929
5051 !! green
5052 !*color2: #4E9A06
5053 !*color10: #8AE234
5054 !! yellow
5055 !*color3: #C4A000
5056 !*color11: #FCE94F
5057 !! blue
5058 !*color4: #3465A4
5059 !*color12: #729FCF
5060 !! purple
5061 !*color5: #75507B
5062 !*color13: #AD7FA8
5063 !! orange (replaces cyan)
5064 !*color6: #ce5c00
5065 !*color14: #fcaf3e
5066 !! white
5067 !*color7: #babdb9
5068 !*color15: #EEEEEC
5069
5070 ! Tango colour theme for rxvt-unicode
5071 URxvt.background: #FFFFFF
5072 URxvt.foreground: #000000
5073
5074 ! Black
5075 URxvt.color0: #2E3436
5076 URxvt.color8: #757773
5077
5078 ! Red
5079 URxvt.color1: #CC0000
5080 URxvt.color9: #EF2929
5081
5082 ! Green
5083 URxvt.color2: #4E9A06
5084 URxvt.color10: #8AE234
5085
5086 ! Yellow
5087 URxvt.color3: #C4A000
5088 URxvt.color11: #FCE94F
5089
5090 ! Blue
5091 URxvt.color4: #3465A4
5092 URxvt.color12: #729FCF
5093
5094 ! Magenta
5095 URxvt.color5: #75507B
5096 URxvt.color13: #AD7FA8
5097
5098 !! Cyan
5099 !URxvt.color6: #06989A
5100 !URxvt.color14: #34E2E2
5101 ! orange (replaces cyan)
5102 ,*color6: #ce5c00
5103 ,*color14: #fcaf3e
5104
5105 ! White
5106 URxvt.color7: #D3D7CF
5107 URxvt.color15: #EEEEEC
5108 #+end_src
5109
5110 *** xkb us_ab keyboard layout
5111
5112 #+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5113 default partial alphanumeric_keys
5114 xkb_symbols "us_ab" {
5115 include "us(basic)"
5116 name[Group1]= "English (US)(aminb)";
5117
5118 key <MENU> { [ Alt_R ] };
5119 };
5120 #+end_src
5121
5122 ** XDG
5123 :PROPERTIES:
5124 :header-args+: :tangle ~/.config/user-dirs.dirs
5125 :END:
5126
5127 #+begin_src conf
5128 XDG_DESKTOP_DIR="$HOME/Desktop"
5129 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5130 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5131 XDG_MUSIC_DIR="$HOME/usr/music"
5132 XDG_PICTURES_DIR="$HOME/usr/pics"
5133 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5134 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5135 XDG_VIDEOS_DIR="$HOME/usr/vids"
5136 #+end_src
5137
5138 ** Zathura
5139 :PROPERTIES:
5140 :header-args+: :tangle ~/.config/zathura/zathurarc
5141 :END:
5142
5143 #+begin_src conf
5144 set smooth-scroll true
5145 set selection-clipboard clipboard
5146 set zoom-step 05
5147 set default-bg "#272727"
5148 set statusbar-bg "#272727"
5149 set inputbar-bg "#373737"
5150 #+end_src
5151
5152 ** Zsh
5153
5154 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5155 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5156 installed.
5157
5158 *** zimrc
5159 :PROPERTIES:
5160 :header-args+: :tangle ~/.zimrc
5161 :END:
5162
5163 #+begin_src sh
5164
5165
5166 #################
5167 # CORE SETTINGS #
5168 #################
5169
5170 #
5171 # Zim settings
5172 #
5173
5174 # Select what modules you would like enabled.
5175 # The second line of modules may depend on options set by modules in the first
5176 # line. These dependencies are noted on the respective module's README.md.
5177 zmodules=(directory environment git git-info history input ssh utility custom \
5178 syntax-highlighting history-substring-search prompt completion)
5179
5180
5181 ###################
5182 # MODULE SETTINGS #
5183 ###################
5184
5185 #
5186 # Prompt
5187 #
5188
5189 # Set your desired prompt here
5190 zprompt_theme='pure'
5191 #PURE_PROMPT_SYMBOL=λ
5192 #PURE_PROMPT_SYMBOL=δ
5193 PURE_PROMPT_SYMBOL=➜
5194
5195 #
5196 # Completion
5197 #
5198
5199 # set an optional host-specific filename for the completion cache file
5200 # if none is provided, the default '.zcompdump' is used.
5201 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5202
5203 #
5204 # Utility
5205 #
5206
5207 # Uncomment to enable command correction prompts
5208 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5209 setopt CORRECT
5210
5211 #
5212 # Environment
5213 #
5214
5215 # Set the string below to the desired terminal title format string.
5216 # The terminal title is redrawn upon directory change, however, variables like
5217 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5218 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5219 # The example below uses the following format: 'username@host:/current/directory'
5220 ztermtitle='%n@%m:%~'
5221
5222 #
5223 # Input
5224 #
5225
5226 # Uncomment to enable double-dot expansion.
5227 # This appends '../' to your input for each '.' you type after an initial '..'
5228 #zdouble_dot_expand='true'
5229
5230 #
5231 # Syntax-Highlighting
5232 #
5233
5234 # This determines what highlighters will be used with the syntax-highlighting module.
5235 # Documentation of the highlighters can be found here:
5236 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5237 # For (u)rxvt, termite and gnome-terminal users,
5238 # removing the 'cursor' highlighter will fix the disappearing cursor problem
5239 #zhighlighters=(main brackets cursor)
5240 zhighlighters=(main brackets pattern)
5241
5242
5243 #
5244 # SSH
5245 #
5246
5247 # Load these ssh identities with the ssh module
5248 zssh_ids=(id_ed25519_bandali)
5249
5250
5251 #
5252 # Pacman
5253 #
5254
5255 # Set (optional) pacman front-end.
5256 zpacman_frontend='yay'
5257
5258 # Load any helper scripts as defined here
5259 #zpacman_helper=(aur)
5260 #+end_src
5261
5262 *** zlogin
5263 :PROPERTIES:
5264 :header-args+: :tangle ~/.zlogin
5265 :END:
5266
5267 #+begin_src sh
5268
5269
5270 #
5271 # User configuration sourced by login shells
5272 #
5273
5274 # Initialize zim
5275 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5276 #+end_src
5277
5278 *** zprofile
5279 :PROPERTIES:
5280 :header-args+: :tangle ~/.zprofile
5281 :END:
5282
5283 #+begin_src sh
5284 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5285 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
5286 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
5287 export XDG_CONFIG_HOME=$HOME/.config
5288 export XDG_DATA_HOME=$HOME/.local/share
5289 export XDG_DATA_DIRS=/usr/local/share:/usr/share
5290 export MAILDIR="$HOME/mail"
5291 export CVS_RSH=ssh
5292 #export MATHMODELS=$HOME/src/eiffel/mathmodels
5293 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5294 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5295
5296 # Eiffel2Java stuff
5297 #export JAVA_HOME=/usr/lib/jvm/default
5298 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5299 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5300 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5301
5302 #export PATH="$HOME/usr/build/pvs:$PATH"
5303 #export SBCLISP_HOME=/usr/share/sbcl-source
5304 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5305
5306 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
5307
5308 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5309 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5310
5311 export NIXPKGS=$HOME/src/git/nixpkgs
5312
5313 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
5314 #+end_src
5315
5316 *** zshenv
5317 :PROPERTIES:
5318 :header-args+: :tangle ~/.zshenv
5319 :END:
5320
5321 #+begin_src sh
5322 # Ensure that a non-login, non-interactive shell has a defined environment.
5323 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5324 source "${ZDOTDIR:-$HOME}/.zprofile"
5325 fi
5326 #+end_src
5327
5328 *** zshrc
5329 :PROPERTIES:
5330 :header-args+: :tangle ~/.zshrc
5331 :END:
5332
5333 #+begin_src sh
5334 # Bash-like navigation
5335 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5336 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5337 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5338 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
5339
5340 #disable -r time # disable shell reserved word
5341 #alias time='time -p' # -p for POSIX output
5342
5343 # rehash if last command was pacaur or pacman
5344 # (so that zsh picks up changes in $PATH immediately)
5345 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5346
5347 #
5348 # User configuration sourced by interactive shells
5349 #
5350
5351 # Change default zim location
5352 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5353
5354 # Start zim
5355 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5356
5357 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5358 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5359
5360 setopt globdots
5361
5362 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
5363 # source ~/.zsh/zsh-autopair/autopair.zsh
5364
5365
5366 ### fzf ###
5367
5368 source /usr/share/fzf/key-bindings.zsh
5369 source /usr/share/fzf/completion.zsh
5370
5371 # Accept history selection instead of putting it on
5372 # the command line
5373 fzf-history-widget-accept() {
5374 fzf-history-widget
5375 zle accept-line
5376 }
5377 #zle -N fzf-history-widget-accept
5378 #bindkey '^R' fzf-history-widget-accept
5379
5380 # alt+c preview
5381 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5382
5383 ### fzf ###
5384
5385
5386 # aliases
5387 alias mpv="mpv --ytdl-format mp4"
5388 alias mv="mv -iv"
5389 alias cp="cp -iv"
5390 alias scl=systemctl
5391 alias jcl=journalctl
5392 alias m="mbsync -a; getmail; notmuch new"
5393 alias best="youtube-dl -f best"
5394 alias nixx="ssh amin@nix.aminb.org"
5395 alias fence="ssh aminb@fencepost.gnu.org"
5396
5397 aur() {
5398 cd ~/usr/build
5399 git clone https://aur.archlinux.org/${1}.git
5400 cd ${1}
5401 }
5402
5403 # i-beam cursor
5404 echo -e "\033[5 q"
5405 #echo -e "\033[6 q"
5406 #+end_src
5407
5408 * Scripts
5409
5410 This section contains various useful scripts and the ones used by the
5411 programs above. For instance, =toggle-tablet= for switching to and
5412 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5413 Xfce's presentation mode which keeps the screen awake, and
5414 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5415 exact brightness value.
5416
5417 ** battery-percentage-time
5418 :PROPERTIES:
5419 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
5420 :END:
5421
5422 #+begin_src sh :tangle no
5423 dbus_send() {
5424 label=$1
5425 dbus-send --print-reply=literal --system \
5426 --dest=org.freedesktop.UPower \
5427 /org/freedesktop/UPower/devices/battery_BAT0 \
5428 org.freedesktop.DBus.Properties.Get \
5429 string:org.freedesktop.UPower.Device \
5430 string:"${label}" | awk '{print $3}'
5431 }
5432
5433 perc=$(dbus_send 'Percentage')
5434 state=$(dbus_send 'State')
5435
5436 if [ "$state" -eq 2 ]; then # Discharging
5437 secs=$(dbus_send 'TimeToEmpty')
5438 elif [ "$state" -eq 1 ]; then # Charging
5439 secs=$(dbus_send 'TimeToFull')
5440 fi
5441
5442 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5443 #+end_src
5444
5445 ** my-i3status.py
5446 :PROPERTIES:
5447 :header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
5448 :END:
5449
5450 #+begin_src python :comments none
5451 # -*- coding: utf-8 -*-
5452
5453 # This script is a simple wrapper which prefixes each i3status line with custom
5454 # information. It is based on:
5455 # https://github.com/i3/i3status/blob/master/contrib/wrapper.py
5456 #
5457 # In ~/.i3status.conf, add the following line:
5458 # output_format = "i3bar"
5459 # in the 'general' section.
5460 # Then, in ~/.config/i3/config or ~/.config/sway/config add:
5461 # status_command i3status | my-i3status.py
5462 # in the 'bar' section. Make sure my-i3status.py is in $PATH.
5463 #
5464 # © 2012 Valentin Haenel <valentin.haenel@gmx.de>
5465 # © 2018 Amin Bandali <bandali@gnu.org>
5466 #
5467 # This program is free software. It comes without any warranty, to the extent
5468 # permitted by applicable law. You can redistribute it and/or modify it under
5469 # the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
5470 # 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
5471 # details.
5472
5473 import sys
5474 import json
5475 import os
5476
5477 def get_nosleep():
5478 """ Return true if ~/.nosleep exists. """
5479 return os.path.isfile(os.path.expanduser("~/.nosleep"))
5480
5481 def print_line(message):
5482 """ Non-buffered printing to stdout. """
5483 sys.stdout.write(message + '\n')
5484 sys.stdout.flush()
5485
5486 def read_line():
5487 """ Interrupted respecting reader for stdin. """
5488 # try reading a line, removing any extra whitespace
5489 try:
5490 line = sys.stdin.readline().strip()
5491 # i3status sends EOF, or an empty line
5492 if not line:
5493 sys.exit(3)
5494 return line
5495 # exit on ctrl-c
5496 except KeyboardInterrupt:
5497 sys.exit()
5498
5499 if __name__ == '__main__':
5500 # Skip the first line which contains the version header.
5501 print_line(read_line())
5502
5503 # The second line contains the start of the infinite array.
5504 print_line(read_line())
5505
5506 while True:
5507 line, prefix = read_line(), ''
5508 # ignore comma at start of lines
5509 if line.startswith(','):
5510 line, prefix = line[1:], ','
5511
5512 if get_nosleep():
5513 j = json.loads(line)
5514 # insert information into the start of the json, but could be anywhere
5515 j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
5516 # and echo back new encoded json
5517 print_line(prefix+json.dumps(j))
5518 else:
5519 print_line(prefix+line)
5520 #+end_src
5521
5522 ** rofi-light
5523 :PROPERTIES:
5524 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5525 :END:
5526
5527 #+begin_src bash
5528 cur=$(light -G)
5529 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
5530 light -S $val
5531 #+end_src
5532
5533 ** s (run sway)
5534 :PROPERTIES:
5535 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5536 :END:
5537
5538 #+begin_src bash
5539 export _JAVA_AWT_WM_NONREPARENTING=1
5540 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5541 light -Nr 2
5542 source $HOME/.zprofile
5543 sway
5544 #+end_src
5545
5546 ** sway-ws-util
5547 :PROPERTIES:
5548 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5549 :END:
5550
5551 #+begin_src bash
5552 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5553 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5554 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5555 dest_ws=-1
5556 op=-1
5557
5558 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5559 op="$1"
5560 if [ "$2" = "prev" ]; then
5561 dest_ws="$prev_ws"
5562 elif [ "$2" = "next" ]; then
5563 dest_ws="$next_ws"
5564 else
5565 echo "Usage: $0 $1 {prev|next} [follow]"
5566 exit 1
5567 fi
5568 else
5569 echo "Usage: $0 {switch|move} {prev|next} [follow]"
5570 exit 1
5571 fi
5572
5573 if [ "$op" = "switch" ]; then
5574 sway workspace "$dest_ws"
5575 elif [ "$op" = "move" ]; then
5576 sway move container to workspace "$dest_ws"
5577 if [ "$3" = "follow" ]; then
5578 sway workspace "$dest_ws"
5579 fi
5580 fi
5581 #+end_src
5582
5583 ** toggle-layout
5584 :PROPERTIES:
5585 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5586 :END:
5587
5588 #+begin_src bash :tangle no
5589 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5590
5591 if [ "$lang" = "us" ]; then
5592 setxkbmap ir
5593 else
5594 setxkbmap us
5595 # xmodmap $HOME/.Xmodmap
5596 fi
5597 #+end_src
5598
5599 ** toggle-presentation-mode
5600 :PROPERTIES:
5601 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5602 :END:
5603
5604 #+begin_src bash :tangle no
5605 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5606 #+end_src
5607
5608 ** toggle-tablet
5609 :PROPERTIES:
5610 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5611 :END:
5612
5613 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5614 a few things:
5615
5616 - rotates the screen using =xrandr=, so that rotating the physical
5617 display of my X220t would have the laptop's battery on the right
5618 hand side,
5619 - enables touch screen,
5620 - properly rotates the stylus pen and touch screen pointers, and
5621 - toggles between RGB and Vertical BGR sub-pixel order.
5622
5623 #+begin_src bash :tangle no
5624 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5625 0) # Screen is not rotated, we should rotate it right (90°)
5626 xrandr -o 3
5627 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5628 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5629 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5630 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5631 ;;
5632 1) # Currently top is rotated right, we should set it normal (0°)
5633 xrandr -o 0
5634 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5635 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5636 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5637 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5638 ;;
5639 *)
5640 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5641 exit 1
5642 ;;
5643 esac
5644 #+end_src
5645
5646 ** unlock-def-gk.py
5647 :PROPERTIES:
5648 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5649 :END:
5650
5651 #+begin_src python :tangle no
5652 import gnomekeyring as gk
5653 # list_item_ids_sync('login')[0] == 1L
5654 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5655 #+end_src
5656
5657 ** volume-info
5658 :PROPERTIES:
5659 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5660 :END:
5661
5662 #+begin_src sh :tangle no
5663 cur_vol=$(pamixer --get-volume)
5664
5665 if [ $(pamixer --get-mute) = true ]; then
5666 printf 'mt \n' "$cur_vol"
5667 else
5668 printf '%02d \n' "$cur_vol"
5669 fi
5670 #+end_src
5671
5672 ** wp
5673
5674 My little wallpaper changer script.
5675
5676 *** wp
5677 :PROPERTIES:
5678 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5679 :END:
5680
5681 #+begin_src bash :tangle no
5682 export DISPLAY=:0
5683
5684 case "$1" in
5685 "day")
5686 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5687 ;;
5688 "night")
5689 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5690 ;;
5691 *)
5692 echo $"Usage: $0 {day|night}"
5693 exit 1
5694 esac
5695 #+end_src
5696
5697 *** wp-auto
5698 :PROPERTIES:
5699 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5700 :END:
5701
5702 #+begin_src bash :tangle no
5703 SED=$(which sed)
5704 ROFI=$(which rofi)
5705
5706 export DISPLAY=:0
5707 HOUR=$(date +%H)
5708
5709 if [ -z "${SED}" ]
5710 then
5711 echo "Did not find 'sed', script cannot continue."
5712 exit 1
5713 fi
5714 if [ -z "${ROFI}" ]
5715 then
5716 echo "Did not find rofi, there is no point to continue."
5717 exit 1
5718 fi
5719
5720 ###
5721 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5722 # Repeated calls should leave the config clean-ish
5723 ###
5724 function set_theme()
5725 {
5726 CDIR="${HOME}/.config/rofi/"
5727 if [ ! -d "${CDIR}" ]
5728 then
5729 mkdir -p ${CDIR}
5730 fi
5731 if [ -f "${CDIR}/config" ]
5732 then
5733 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5734 fi
5735 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5736
5737 }
5738
5739 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5740 then
5741 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5742 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5743 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5744 else
5745 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5746 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5747 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5748 fi
5749 #+end_src
5750
5751 *** wp.service
5752 :PROPERTIES:
5753 :header-args+: :tangle ~/.config/systemd/user/wp.service
5754 :END:
5755
5756 #+begin_src conf :tangle no
5757 [Unit]
5758 Description=wallpaper service
5759
5760 [Service]
5761 Type=oneshot
5762 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5763 #+end_src
5764
5765 *** wp.timer
5766 :PROPERTIES:
5767 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5768 :END:
5769
5770 #+begin_src conf :tangle no
5771 [Unit]
5772 [Unit]
5773 Description=wallpaper timer
5774
5775 [Timer]
5776 OnCalendar=07,21:00
5777 Unit=wp.service
5778 Persistent=true
5779
5780 [Install]
5781 WantedBy=timers.target
5782 #+end_src
5783
5784 ** zathura-sync.sh
5785 :PROPERTIES:
5786 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5787 :END:
5788
5789 #+begin_src sh
5790 pos="$1"
5791 pdffile="$2"
5792 zathura --synctex-forward "$pos" "$pdffile" || \
5793 (
5794 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5795 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5796 #+end_src
5797 ** Fun :)
5798
5799 *** eat-em
5800 :PROPERTIES:
5801 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5802 :END:
5803
5804 #+begin_src sh
5805 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5806 # [ESC] character in original post removed here.
5807
5808 # ANSI Color -- use these variables to easily have different color
5809 # and format output. Make sure to output the reset sequence after
5810 # colors (f = foreground, b = background), and use the 'off'
5811 # feature for anything you turn on.
5812
5813 initializeANSI()
5814 {
5815 esc="$(echo -en '\e')"
5816
5817 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5818 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5819 cyanf="${esc}[36m"; whitef="${esc}[37m"
5820
5821 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5822 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5823 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5824
5825 boldon="${esc}[1m"; boldoff="${esc}[22m"
5826 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5827 ulon="${esc}[4m"; uloff="${esc}[24m"
5828 invon="${esc}[7m"; invoff="${esc}[27m"
5829
5830 reset="${esc}[0m"
5831 }
5832
5833 # note in this first use that switching colors doesn't require a reset
5834 # first - the new color overrides the old one.
5835
5836 #clear
5837
5838 initializeANSI
5839
5840 cat << EOF
5841
5842 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5843 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5844 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5845 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5846 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5847 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5848
5849 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5850 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5851 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5852 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5853 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5854 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5855
5856 EOF
5857 #+end_src
5858
5859 *** invade-em
5860 :PROPERTIES:
5861 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5862 :END:
5863
5864 #+begin_src bash
5865 #
5866 # ANSI color scheme script featuring Space Invaders
5867 #
5868 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5869 # Modified by lolilolicon
5870 #
5871
5872 f=3 b=4
5873 for j in f b; do
5874 for i in {0..7}; do
5875 printf -v $j$i %b "\e[${!j}${i}m"
5876 done
5877 done
5878 bld=$'\e[1m'
5879 rst=$'\e[0m'
5880
5881 cat << EOF
5882
5883 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5884 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5885 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5886 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5887
5888 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5889 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5890 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5891 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5892
5893
5894 $f7▌$rst
5895
5896 $f7▌$rst
5897
5898 $f7 ▄█▄ $rst
5899 $f7▄█████████▄$rst
5900 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5901
5902 EOF
5903 #+end_src