git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh :tangle no
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf :tangle no
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf :tangle no
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** dovecot
 393 :PROPERTIES:
 394 :header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
 395 :END:
 396
 397 #+begin_src conf
 398 protocols = imap
 399
 400 listen = 127.0.0.1
 401 log_path = /var/log/dovecot.log
 402 info_log_path = /var/log/dovecot-info.log
 403
 404 ssl = no
 405 disable_plaintext_auth = no
 406
 407 auth_verbose = yes
 408 auth_mechanisms = plain
 409
 410 passdb {
 411   driver = passwd-file
 412   args = /etc/dovecot/passwd
 413 }
 414
 415 userdb {
 416   driver = static
 417   args = uid=amin gid=amin home=/home/amin/mail/%d/%n
 418   default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
 419 }
 420
 421 # mail_home = /home/amin/mail/%d/%n
 422 # mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
 423
 424 # namespace {
 425 #   inbox = yes
 426 #   separator = /
 427 # }
 428
 429 mail_plugins = $mail_plugins fts fts_lucene
 430
 431 plugin {
 432   fts = lucene
 433   fts_lucene = whitespace_chars=@.
 434   fts_autoindex = yes
 435 }
 436 #+end_src
 437
 438 ** Dunst
 439 :PROPERTIES:
 440 :header-args+: :tangle ~/.config/dunst/dunstrc
 441 :END:
 442
 443 #+begin_src conf
 444 [global]
 445 #font = Ubuntu Mono 10.5
 446 font = Inconsolata 11
 447
 448 # Path to default icons.
 449 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 450
 451 icon_position = left
 452 # <b>bold</b>
 453 # <i>italic</i>
 454 # <s>strikethrough<s/>
 455 # <u>underline</u>
 456 markup = full
 457 # The format of the message. Possible variables are:
 458 #   %a  appname
 459 #   %s  summary
 460 #   %b  body
 461 #   %i  iconname (including its path)
 462 #   %I  iconname (without its path)
 463 #   %p  progress value if set ([  0%] to [100%]) or nothing
 464 # Markup is allowed
 465 format = "<b>%s</b>\n%b"
 466 # Sort messages by urgency
 467 sort = yes
 468 # Show how many messages are currently hidden (because of geometry)
 469 indicate_hiddenl= no
 470 # Alignment of message text.
 471 # Possible values are "left", "center" and "right"
 472 alignment = center
 473 # The frequency with wich text that is longer than the notification
 474 # window allows bounces back and forth.
 475 # This option conflicts with 'word_wrap'.
 476 # Set to 0 to disable
 477 bounce_freq = 3
 478 # show age of message if message is older than show_age_threshold seconds.
 479 # set to -1 to disable
 480 show_age_threshold = -1
 481 # split notifications into multiple lines if they don't fit into geometry
 482 word_wrap = yes
 483 # ignore newlines '\n' in notifications
 484 ignore_newline = no
 485 # The geometry of the message window.
 486 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 487 # The height is measured in number of notifications everything else in pixels. If the width
 488 # is omitted but the height is given ("-geometry x2"), the message window
 489 # expands over the whole screen (dmenu-like). If width is 0,
 490 # the window expands to the longest message displayed.
 491 # A positive x is measured from the left, a negative from the
 492 # right side of the screen.  Y is measured from the top and down respectevly.
 493 # The width can be negative. In this case the actual width is the
 494 # screen width minus the width defined in within the geometry option.
 495 #geometry = "410x12-12+12"
 496 #geometry = "0x0-30-30"
 497 geometry = "260x12-30-30"
 498 # The transparency of the window. range: [0; 100]
 499 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 500 transparency = 0
 501 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 502 # for longer than idle_threshold seconds.
 503 # Set to 0 to disable.
 504 idle_threshold = 120
 505 # Which monitor should the notifications be displayed on.
 506 monitor = 0
 507 # Display notification on focused monitor. Possible modes are:
 508 # mouse: follow mouse pointer
 509 # keyboard: follow window with keyboard focus
 510 # none: don't follow anything
 511 #
 512 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 513 # This should be the case for almost all modern windowmanagers.
 514 #
 515 # If this option is set to mouse or keyboard, the monitor option will be
 516 # ignored.
 517 follow = keyboard
 518 # should a notification popped up from history be sticky or
 519 # timeout as if it would normally do.
 520 sticky_history = yes
 521 # The height of a single line. If the height is smaller than the font height,
 522 # it will get raised to the font height.
 523 # This adds empty space above and under the text.
 524 line_height = 0
 525
 526 show_indicators = yes
 527
 528 # Draw a line of 'separatpr_height' pixel height between two notifications.
 529 # Set to 0 to disable
 530 separator_height = 3
 531 # padding between text and separator
 532 padding = 8
 533 # horizontal padding
 534 horizontal_padding = 8
 535 # Define a color for the separator.
 536 # possible values are:
 537 #  * auto: dunst tries to find a color fitting to the background
 538 #  * foreground: use the same color as the foreground
 539 #  * frame: use the same color as the frame.
 540 #  * anything else will be interpreted as a X color
 541 separator_color = foreground
 542 # print a notification on startup
 543 # This is mainly for error detection, since dbus (re-)starts dunst
 544 # automatically after a crash.
 545 startup_notification = false
 546 # dmenu path
 547 #dmenu = /usr/bin/dmenu -p dunst:
 548 dmenu = /usr/bin/rofi -dmenu -p dunst:
 549 # browser for opening urls in context menu
 550 browser = /usr/bin/firefox -new-tab
 551 [frame]
 552 width = 0
 553 color = "#377222"
 554 [shortcuts]
 555 # shortcuts are specified as [modifier+][modifier+]...key
 556 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 557 # and 'mod4' (windows-key)
 558 # xev might be helpful to find names for keys
 559 # close notification
 560 close = ctrl+space
 561 # close all notifications
 562 close_all = ctrl+shift+space
 563 # redisplay last message(s)
 564 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 565 history = ctrl+shift+h
 566 # context menu
 567 context = ctrl+shift+period
 568 [urgency_low]
 569 # IMPORTANT: colors have to be defined in quotation marks.
 570 # Otherwise the '#' and following  would be interpreted as a comment.
 571 background = "#1d2a30"
 572 foreground = "#71c2af"
 573 timeout = 3
 574 [urgency_normal]
 575 background = "#1d2a30"
 576 foreground = "#71c2af"
 577 timeout = 0
 578 [urgency_critical]
 579 background = "#1d2a30"
 580 foreground = "#ff9982"
 581 timeout = 0
 582
 583 # Every section that isn't one of the above is interpreted as a rules
 584 # to override settings for certain messages.
 585 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 586 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 587 # and 'format'.
 588 # Shell-like globbing will get expanded.
 589 #
 590 # SCRIPTING
 591 # you can specify a script that gets run when the rule matches by setting
 592 # the 'script' option.
 593 # The script will be called as follows:
 594 # script appname summary body icon urgency
 595 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 596 #
 597 # NOTE: if you don't want a notification to be displayed, set the format to ""
 598 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 599 # fitting options for rules.
 600 #[espeak]
 601 #    summary = "*"
 602 #    script = dunst_espeak.sh
 603 #[script-test]
 604 #    summary = "*script*"
 605 #    script = dunst_test.sh
 606 #[ignore]
 607 ## This notification will not be displayed
 608 #    summary = "foobar"
 609 #    format = ""
 610 #[signed_on]
 611 #    appname = Pidgin
 612 #    summary = "*signed on*"
 613 #    urgency = low
 614 #
 615 #[signed_off]
 616 #    appname = Pidgin
 617 #    summary = *signed off*
 618 #    urgency = low
 619 #
 620 #[says]
 621 #    appname = Pidgin
 622 #    summary = *says*
 623 #    urgency = critical
 624 #
 625 #[twitter]
 626 #    appname = Pidgin
 627 #    summary = *twitter.com*
 628 #    urgency = normal
 629 #
 630 [xfpm-backlight]
 631     summary = *Brightness*
 632     urgency = low
 633 #+end_src
 634
 635 ** Fontconfig
 636 :PROPERTIES:
 637 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 638 :END:
 639
 640 #+begin_src xml
 641 <?xml version="1.0"?>
 642 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 643 <fontconfig>
 644  <match target="font">
 645   <edit mode="assign" name="rgba">
 646    <const>rgb</const>
 647   </edit>
 648  </match>
 649  <match target="font">
 650   <edit mode="assign" name="hinting">
 651    <bool>true</bool>
 652   </edit>
 653  </match>
 654  <match target="font">
 655   <edit mode="assign" name="hintstyle">
 656    <const>hintslight</const>
 657   </edit>
 658  </match>
 659  <match target="font">
 660   <edit mode="assign" name="antialias">
 661    <bool>true</bool>
 662   </edit>
 663  </match>
 664  <match target="font">
 665   <edit mode="assign" name="lcdfilter">
 666    <const>lcddefault</const>
 667   </edit>
 668  </match>
 669  <dir>~/.fonts</dir>
 670
 671  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 672  <alias binding="same">
 673   <family>Helvetica</family>
 674   <prefer>
 675    <family>Liberation Sans</family>
 676   </prefer>
 677 </alias>
 678 </fontconfig>
 679 #+end_src
 680
 681 ** getmail
 682
 683 *** getmailrc
 684 :PROPERTIES:
 685 :header-args+: :tangle ~/.getmail/getmailrc
 686 :END:
 687
 688 #+begin_src conf
 689 [retriever]
 690 type = SimplePOP3SSLRetriever
 691 server = fencepost.gnu.org
 692 username = bandali
 693 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 694 port = 995
 695 use_apop = True
 696
 697 [destination]
 698 type = Maildir
 699 path = ~/mail/gnu/Inbox/
 700
 701 [options]
 702 delete = True
 703 #+end_src
 704
 705 *** getmail.service
 706 :PROPERTIES:
 707 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 708 :END:
 709
 710 #+begin_src conf :tangle no
 711 [Unit]
 712 Description=getmail service
 713
 714 [Service]
 715 Type=oneshot
 716 ExecStart=/usr/bin/getmail
 717 StandardOutput=syslog
 718 StandardError=syslog
 719 #+end_src
 720
 721 *** getmail.timer
 722 :PROPERTIES:
 723 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 724 :END:
 725
 726 #+begin_src conf :tangle no
 727 [Unit]
 728 Description=getmail timer
 729
 730 [Timer]
 731 OnCalendar=*:0/30
 732 Persistent=true
 733 Unit=getmail.service
 734
 735 [Install]
 736 WantedBy=timers.target
 737 #+end_src
 738
 739 ** Git
 740
 741 *** gitconfig
 742 :PROPERTIES:
 743 :header-args+: :tangle ~/.gitconfig
 744 :END:
 745
 746 **** user
 747 #+begin_src conf
 748 [user]
 749     name = Amin Bandali
 750     email = bandali@gnu.org
 751     signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
 752 #+end_src
 753
 754 **** signing
 755 #+begin_src conf
 756 [commit]
 757     gpgsign = true
 758 # [format]
 759 #     signoff = true
 760 #+end_src
 761
 762 **** core
 763 #+begin_src conf
 764 [core]
 765     autocrlf = input  # CRLF -> LF on commit
 766     editor = emacsclient -t
 767     excludesfile = ~/.gitignore_global
 768     pager = "less"
 769 #+end_src
 770
 771 **** gpg
 772 #+begin_src conf
 773 [gpg]
 774     program = gpg2
 775 #+end_src
 776
 777 **** alias
 778 #+begin_src conf
 779 [alias]
 780     git = !exec git  # handle nested git calls, e.g. git git status
 781     aliases = config --get-regexp '^alias\\.'
 782     a = add
 783     s = status
 784     sl = status --long
 785     c = checkout
 786     cb = checkout -b
 787     b = branch
 788     r = rebase
 789     p = pull
 790     pr = pull --rebase
 791     ps = push
 792     psf = push --force
 793     nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
 794     nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
 795 #+end_src
 796
 797 **** color
 798 #+begin_src conf
 799 [color]
 800     ui = auto
 801 [color "status"]
 802     added = green bold
 803     changed = red bold
 804     untracked = red bold
 805 [color "branch"]
 806     current = green bold
 807     remote = magenta bold
 808 [color "diff"]
 809     new = green bold
 810     old = red bold
 811 #+end_src
 812
 813 **** status
 814 #+begin_src conf
 815 [status]
 816     # showUntrackedFiles = all
 817     short=true
 818     branch=true
 819 #+end_src
 820
 821 **** github
 822 #+begin_src conf
 823 [github]
 824         user = aminb
 825 #+end_src
 826
 827 **** send-email
 828 #+begin_src conf
 829 [sendemail]
 830         smtpuser = bandali
 831         smtpserver = fencepost.gnu.org
 832         smtpserverport = 587
 833         smtpencryption = tls
 834         annotate = yes
 835 #+end_src
 836
 837 *** gitignore
 838 :PROPERTIES:
 839 :header-args+: :tangle ~/.gitignore_global
 840 :END:
 841
 842 #+begin_src conf
 843 *.orig
 844 *.py[co]
 845 *.sublime-workspace
 846 *~
 847 .DS_Store
 848 *.elc
 849 *-autoloads.el
 850 #+end_src
 851
 852 ** GnuPG
 853 :PROPERTIES:
 854 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 855 :END:
 856
 857 #+begin_src conf
 858 default-cache-ttl 43200
 859 max-cache-ttl 43200
 860
 861 default-cache-ttl-ssh 10800
 862 max-cache-ttl-ssh 10800
 863
 864 # pinentry-program /usr/bin/pinentry-qt
 865 #+end_src
 866
 867 ** GTK
 868
 869 *** gtk-2.0
 870 :PROPERTIES:
 871 :header-args+: :tangle ~/.gtkrc-2.0
 872 :END:
 873
 874 #+begin_src conf
 875 gtk-theme-name="Greybird"
 876 gtk-icon-theme-name="Paper"
 877 gtk-font-name="Ubuntu 10"
 878 gtk-menu-images=0
 879 # gtk-key-theme-name = "Emacs"
 880 #+end_src
 881
 882 *** gtk-3.0
 883 :PROPERTIES:
 884 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 885 :END:
 886
 887 #+begin_src conf :tangle no
 888 [Settings]
 889 gtk-icon-theme-name = Paper
 890 # gtk-theme-name = Adwaita
 891
 892 gtk-theme-name = Greybird
 893 # gtk-theme-name = Arc-Darker
 894 # gtk-theme-name = Numix-ArchBlue
 895
 896 gtk-font-name = Ubuntu 10
 897 # gtk-key-theme-name = Emacs
 898 #+end_src
 899
 900 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 901 :PROPERTIES:
 902 :header-args+: :tangle ~/.config/i3gs/config
 903 :END:
 904
 905 #+begin_src conf :comments none :tangle no
 906 borders_width=0 0 2 0
 907 separator_width=10
 908
 909 #[mpd]
 910 #preset=MPD
 911 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
 912 #borders_color=#7FDBFF
 913
 914 [ram]
 915 preset=RAM
 916 title=<span weight='heavy' fgcolor='#3D9970'> </span>
 917 borders_color=#3D9970
 918
 919 #[cpu]
 920 #preset=CPU
 921 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
 922 #borders_color=#2ECC40
 923
 924 #[hdd]
 925 #preset=HDD
 926 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
 927 #borders_color=#01FF70
 928
 929 [volume]
 930 command=volume-info
 931 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
 932 borders_color=#7FDBFF
 933
 934 [battery]
 935 preset=BAT
 936 command=battery-percentage-time
 937 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
 938 borders_color=#39CCCC
 939
 940 [wifi]
 941 preset=WIFI
 942 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 943 borders_color=#01FF70
 944
 945 [date]
 946 preset=DATE
 947 command=date '+%-I:%M, %a %b %d '
 948 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 949 borders_color=#FFDC00
 950 separator_width=0
 951 #+end_src
 952
 953 ** i3status
 954 :PROPERTIES:
 955 :header-args+: :tangle ~/.config/i3status/config
 956 :END:
 957
 958 #+begin_src conf :comments none
 959 # i3status configuration file.
 960 # see "man i3status" for documentation.
 961
 962 # It is important that this file is edited as UTF-8.
 963 # The following line should contain a sharp s:
 964 # ß
 965 # If the above line is not correctly displayed, fix your editor first!
 966
 967 general {
 968         colors = true
 969         interval = 5
 970         output_format = "i3bar"
 971 }
 972
 973 # order += "ipv6"
 974 order += "disk /"
 975 order += "disk /data"
 976 order += "wireless _first_"
 977 order += "ethernet _first_"
 978 order += "battery 0"
 979 order += "volume master"
 980 order += "load"
 981 order += "tztime local"
 982
 983 wireless _first_ {
 984         format_up = "W:%quality %essid %ip"
 985         format_down = "W: down"
 986 }
 987
 988 ethernet _first_ {
 989         # if you use %speed, i3status requires root privileges
 990         format_up = "E: %ip (%speed)"
 991         format_down = "E: down"
 992 }
 993
 994 battery 0 {
 995         format = "%status %percentage %remaining (%consumption)"
 996         path = "/sys/class/power_supply/BAT%d/uevent"
 997         low_threshold = "10"
 998         threshold_type = "percentage"
 999         last_full_capacity = true
1000         integer_battery_capacity = true
1001         hide_seconds = true
1002 }
1003
1004 tztime local {
1005         format = "%-I:%M%P %a %b %d"
1006 }
1007
1008 volume master {
1009         format = "♪ %volume"
1010         format_muted = "🔇 %volume"
1011         device = "pulse"
1012 }
1013
1014 load {
1015         format = "%1min"
1016 }
1017
1018 disk "/" {
1019         format = "/ %avail"
1020 }
1021
1022 disk "/data" {
1023         format = "/data %avail"
1024 }
1025 #+end_src
1026
1027 ** isync
1028
1029 *** mbsyncrc
1030 :PROPERTIES:
1031 :header-args+: :tangle ~/.mbsyncrc
1032 :END:
1033
1034 #+begin_src conf
1035 # Global defaults
1036 CopyArrivalDate yes
1037 Create Both
1038 Expunge Both
1039
1040 ######
1041 IMAPAccount amin
1042 Host mail.aminb.org
1043 User amin@aminb.org
1044 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
1045 SSLType IMAPS
1046
1047 IMAPStore amin-remote
1048 Account amin
1049
1050 IMAPAccount amin-dovecot
1051 Host 127.0.0.1
1052 Port 143
1053 User amin@aminb.org
1054 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
1055 SSLType None
1056
1057 IMAPStore amin-local
1058 Account amin-dovecot
1059
1060 Channel amin
1061 Master :amin-remote:
1062 Slave :amin-local:
1063 Patterns *
1064
1065 ######
1066 IMAPAccount uwaterloo
1067 Host connect.uwaterloo.ca
1068 User abandali
1069 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1070 SSLType IMAPS
1071
1072 IMAPStore uwaterloo-remote
1073 Account uwaterloo
1074
1075 IMAPAccount uwaterloo-dovecot
1076 Host 127.0.0.1
1077 Port 143
1078 User abandali@uwaterloo.ca
1079 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
1080 SSLType None
1081
1082 IMAPStore uwaterloo-local
1083 Account uwaterloo-dovecot
1084
1085 Channel uwaterloo
1086 Master :uwaterloo-remote:
1087 Slave :uwaterloo-local:
1088 Patterns *
1089 #+end_src
1090
1091 *** mbsync.service
1092 :PROPERTIES:
1093 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1094 :END:
1095
1096 #+begin_src conf :tangle no
1097 [Unit]
1098 Description=mbsync service
1099
1100 [Service]
1101 Type=oneshot
1102 ExecStart=/usr/bin/mbsync -Va
1103 StandardOutput=syslog
1104 StandardError=syslog
1105 #+end_src
1106
1107 *** mbsync.timer
1108 :PROPERTIES:
1109 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1110 :END:
1111
1112 #+begin_src conf :tangle no
1113 [Unit]
1114 Description=mbsync timer
1115
1116 [Timer]
1117 OnCalendar=*:0/15
1118 Persistent=true
1119 Unit=mbsync.service
1120
1121 [Install]
1122 WantedBy=timers.target
1123 #+end_src
1124
1125 ** Latexmk
1126 :PROPERTIES:
1127 :header-args+: :tangle ~/.latexmkrc
1128 :END:
1129
1130 #+begin_src conf
1131 $pdf_previewer = "start zathura %O %S";
1132 $clean_ext = "aux out";
1133
1134 # $pdf_update_method = 4;
1135 # $pdf_update_command = "zathura %O %S";
1136
1137 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1138 # by Ctrl+click in the PDF.
1139 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1140 # editor.
1141 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1142 #+end_src
1143
1144 ** libinput
1145
1146 Improve XPS 15 9560's touchpad experience.
1147
1148 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1149 #+begin_src conf :tangle no
1150 Section "InputClass"
1151     Identifier "libinput touchpad catchall"
1152     Driver "libinput"
1153     MatchIsTouchpad "on"
1154     Option "ClickMethod" "clickfinger"
1155     Option "NaturalScrolling" "true"
1156     Option "Tapping" "on"
1157     Option "TappingButtonMap" "lrm"
1158 EndSection
1159 #+end_src
1160
1161 ** mpd
1162 :PROPERTIES:
1163 :header-args+: :tangle ~/.config/mpd/mpd.conf
1164 :END:
1165
1166 #+begin_src conf
1167 # An example configuration file for MPD.
1168 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1169
1170
1171 # Files and directories #######################################################
1172 #
1173 # This setting controls the top directory which MPD will search to discover the
1174 # available audio files and add them to the daemon's online database. This
1175 # setting defaults to the XDG directory, otherwise the music directory will be
1176 # be disabled and audio files will only be accepted over ipc socket (using
1177 # file:// protocol) or streaming files over an accepted protocol.
1178 #
1179 music_directory         "~/usr/music"
1180 #
1181 # This setting sets the MPD internal playlist directory. The purpose of this
1182 # directory is storage for playlists created by MPD. The server will use
1183 # playlist files not created by the server but only if they are in the MPD
1184 # format. This setting defaults to playlist saving being disabled.
1185 #
1186 playlist_directory              "~/.mpd/playlists"
1187 #
1188 # This setting sets the location of the MPD database. This file is used to
1189 # load the database at server start up and store the database while the
1190 # server is not up. This setting defaults to disabled which will allow
1191 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1192 # files over an accepted protocol.
1193 #
1194 db_file                 "~/.mpd/database"
1195 #
1196 # These settings are the locations for the daemon log files for the daemon.
1197 # These logs are great for troubleshooting, depending on your log_level
1198 # settings.
1199 #
1200 # The special value "syslog" makes MPD use the local syslog daemon. This
1201 # setting defaults to logging to syslog, otherwise logging is disabled.
1202 #
1203 log_file                        "~/.mpd/log"
1204 #
1205 # This setting sets the location of the file which stores the process ID
1206 # for use of mpd --kill and some init scripts. This setting is disabled by
1207 # default and the pid file will not be stored.
1208 #
1209 pid_file                        "~/.mpd/pid"
1210 #
1211 # This setting sets the location of the file which contains information about
1212 # most variables to get MPD back into the same general shape it was in before
1213 # it was brought down. This setting is disabled by default and the server
1214 # state will be reset on server start up.
1215 #
1216 state_file                      "~/.mpd/state"
1217 #
1218 # The location of the sticker database.  This is a database which
1219 # manages dynamic information attached to songs.
1220 #
1221 sticker_file                    "~/.mpd/sticker.sql"
1222 #
1223 ###############################################################################
1224
1225
1226 # General music daemon options ################################################
1227 #
1228 # This setting specifies the user that MPD will run as. MPD should never run as
1229 # root and you may use this setting to make MPD change its user ID after
1230 # initialization. This setting is disabled by default and MPD is run as the
1231 # current user.
1232 #
1233 #user                           "nobody"
1234 #
1235 # This setting specifies the group that MPD will run as. If not specified
1236 # primary group of user specified with "user" setting will be used (if set).
1237 # This is useful if MPD needs to be a member of group such as "audio" to
1238 # have permission to use sound card.
1239 #
1240 #group                          "nogroup"
1241 #
1242 # This setting sets the address for the daemon to listen on. Careful attention
1243 # should be paid if this is assigned to anything other then the default, any.
1244 # This setting can deny access to control of the daemon. Not effective if
1245 # systemd socket activiation is in use.
1246 #
1247 # For network
1248 #bind_to_address                "any"
1249 #
1250 # And for Unix Socket
1251 #bind_to_address                "~/.mpd/socket"
1252 #
1253 # This setting is the TCP port that is desired for the daemon to get assigned
1254 # to.
1255 #
1256 #port                           "6600"
1257 #
1258 # This setting controls the type of information which is logged. Available
1259 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1260 # argument is recommended for troubleshooting, though can quickly stretch
1261 # available resources on limited hardware storage.
1262 #
1263 #log_level                      "default"
1264 #
1265 # If you have a problem with your MP3s ending abruptly it is recommended that
1266 # you set this argument to "no" to attempt to fix the problem. If this solves
1267 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1268 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1269 # point gapless MP3 playback can be enabled.
1270 #
1271 #gapless_mp3_playback                   "yes"
1272 #
1273 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1274 # of starting playback after startup.
1275 #
1276 #restore_paused "no"
1277 #
1278 # This setting enables MPD to create playlists in a format usable by other
1279 # music players.
1280 #
1281 #save_absolute_paths_in_playlists       "no"
1282 #
1283 # This setting defines a list of tag types that will be extracted during the
1284 # audio file discovery process. The complete list of possible values can be
1285 # found in the user manual.
1286 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1287 #
1288 # This setting enables automatic update of MPD's database when files in
1289 # music_directory are changed.
1290 #
1291 #auto_update    "yes"
1292 #
1293 # Limit the depth of the directories being watched, 0 means only watch
1294 # the music directory itself.  There is no limit by default.
1295 #
1296 #auto_update_depth "3"
1297 #
1298 ###############################################################################
1299
1300
1301 # Symbolic link behavior ######################################################
1302 #
1303 # If this setting is set to "yes", MPD will discover audio files by following
1304 # symbolic links outside of the configured music_directory.
1305 #
1306 #follow_outside_symlinks        "yes"
1307 #
1308 # If this setting is set to "yes", MPD will discover audio files by following
1309 # symbolic links inside of the configured music_directory.
1310 #
1311 #follow_inside_symlinks         "yes"
1312 #
1313 ###############################################################################
1314
1315
1316 # Zeroconf / Avahi Service Discovery ##########################################
1317 #
1318 # If this setting is set to "yes", service information will be published with
1319 # Zeroconf / Avahi.
1320 #
1321 #zeroconf_enabled               "yes"
1322 #
1323 # The argument to this setting will be the Zeroconf / Avahi unique name for
1324 # this MPD server on the network.
1325 #
1326 #zeroconf_name                  "Music Player"
1327 #
1328 ###############################################################################
1329
1330
1331 # Permissions #################################################################
1332 #
1333 # If this setting is set, MPD will require password authorization. The password
1334 # setting can be specified multiple times for different password profiles.
1335 #
1336 #password                        "password@read,add,control,admin"
1337 #
1338 # This setting specifies the permissions a user has who has not yet logged in.
1339 #
1340 #default_permissions             "read,add,control,admin"
1341 #
1342 ###############################################################################
1343
1344
1345 # Database #######################################################################
1346 #
1347
1348 #database {
1349 #       plugin "proxy"
1350 #       host "other.mpd.host"
1351 #       port "6600"
1352 #}
1353
1354 # Input #######################################################################
1355 #
1356
1357 input {
1358         plugin "curl"
1359 #       proxy "proxy.isp.com:8080"
1360 #       proxy_user "user"
1361 #       proxy_password "password"
1362 }
1363
1364 #
1365 ###############################################################################
1366
1367 # Audio Output ################################################################
1368 #
1369
1370 audio_output {
1371     type    "pulse"
1372     name    "pulse audio"
1373 }
1374
1375 audio_output {
1376     type    "fifo"
1377     name    "my_fifo"
1378     path    "/tmp/mpd.fifo"
1379     format  "44100:16:2"
1380 }
1381
1382 # MPD supports various audio output types, as well as playing through multiple
1383 # audio outputs at the same time, through multiple audio_output settings
1384 # blocks. Setting this block is optional, though the server will only attempt
1385 # autodetection for one sound card.
1386 #
1387 # An example of an ALSA output:
1388 #
1389 #audio_output {
1390 #       type            "alsa"
1391 #       name            "My ALSA Device"
1392 ##      device          "hw:0,0"        # optional
1393 ##      mixer_type      "hardware"      # optional
1394 ##      mixer_device    "default"       # optional
1395 ##      mixer_control   "PCM"           # optional
1396 ##      mixer_index     "0"             # optional
1397 #}
1398 #
1399 # An example of an OSS output:
1400 #
1401 #audio_output {
1402 #       type            "oss"
1403 #       name            "My OSS Device"
1404 ##      device          "/dev/dsp"      # optional
1405 ##      mixer_type      "hardware"      # optional
1406 ##      mixer_device    "/dev/mixer"    # optional
1407 ##      mixer_control   "PCM"           # optional
1408 #}
1409 #
1410 # An example of a shout output (for streaming to Icecast):
1411 #
1412 #audio_output {
1413 #       type            "shout"
1414 #       encoder         "vorbis"                # optional
1415 #       name            "My Shout Stream"
1416 #       host            "localhost"
1417 #       port            "8000"
1418 #       mount           "/mpd.ogg"
1419 #       password        "hackme"
1420 #       quality         "5.0"
1421 #       bitrate         "128"
1422 #       format          "44100:16:1"
1423 ##      protocol        "icecast2"              # optional
1424 ##      user            "source"                # optional
1425 ##      description     "My Stream Description" # optional
1426 ##      url             "http://example.com"    # optional
1427 ##      genre           "jazz"                  # optional
1428 ##      public          "no"                    # optional
1429 ##      timeout         "2"                     # optional
1430 ##      mixer_type      "software"              # optional
1431 #}
1432 #
1433 # An example of a recorder output:
1434 #
1435 #audio_output {
1436 #       type            "recorder"
1437 #       name            "My recorder"
1438 #       encoder         "vorbis"                # optional, vorbis or lame
1439 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1440 ##      quality         "5.0"                   # do not define if bitrate is defined
1441 #       bitrate         "128"                   # do not define if quality is defined
1442 #       format          "44100:16:1"
1443 #}
1444 #
1445 # An example of a httpd output (built-in HTTP streaming server):
1446 #
1447 #audio_output {
1448 #       type            "httpd"
1449 #       name            "My HTTP Stream"
1450 #       encoder         "vorbis"                # optional, vorbis or lame
1451 #       port            "8000"
1452 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1453 ##      quality         "5.0"                   # do not define if bitrate is defined
1454 #       bitrate         "128"                   # do not define if quality is defined
1455 #       format          "44100:16:1"
1456 #       max_clients     "0"                     # optional 0=no limit
1457 #}
1458 #
1459 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1460 #
1461 #audio_output {
1462 #       type            "pulse"
1463 #       name            "My Pulse Output"
1464 ##      server          "remote_server"         # optional
1465 ##      sink            "remote_server_sink"    # optional
1466 #}
1467 #
1468 # An example of a winmm output (Windows multimedia API).
1469 #
1470 #audio_output {
1471 #       type            "winmm"
1472 #       name            "My WinMM output"
1473 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1474 #               or
1475 ##      device          "0"             # optional
1476 ##      mixer_type      "hardware"      # optional
1477 #}
1478 #
1479 # An example of an openal output.
1480 #
1481 #audio_output {
1482 #       type            "openal"
1483 #       name            "My OpenAL output"
1484 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1485 #}
1486 #
1487 # An example of an sndio output.
1488 #
1489 #audio_output {
1490 #       type            "sndio"
1491 #       name            "sndio output"
1492 #       mixer_type      "software"
1493 #}
1494 #
1495 # An example of an OS X output:
1496 #
1497 #audio_output {
1498 #       type            "osx"
1499 #       name            "My OS X Device"
1500 ##      device          "Built-in Output"       # optional
1501 ##      channel_map      "-1,-1,0,1"    # optional
1502 #}
1503 #
1504 ## Example "pipe" output:
1505 #
1506 #audio_output {
1507 #       type            "pipe"
1508 #       name            "my pipe"
1509 #       command         "aplay -f cd 2>/dev/null"
1510 ## Or if you're want to use AudioCompress
1511 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1512 ## Or to send raw PCM stream through PCM:
1513 #       command         "nc example.org 8765"
1514 #       format          "44100:16:2"
1515 #}
1516 #
1517 ## An example of a null output (for no audio output):
1518 #
1519 #audio_output {
1520 #       type            "null"
1521 #       name            "My Null Output"
1522 #       mixer_type      "none"                  # optional
1523 #}
1524 #
1525 ###############################################################################
1526
1527
1528 # Normalization automatic volume adjustments ##################################
1529 #
1530 # This setting specifies the type of ReplayGain to use. This setting can have
1531 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1532 # chooses between "track" and "album" depending on the current state of
1533 # random playback. If random playback is enabled then "track" mode is used.
1534 # See <http://www.replaygain.org> for more details about ReplayGain.
1535 # This setting is off by default.
1536 #
1537 #replaygain                     "album"
1538 #
1539 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1540 # default this setting is disabled.
1541 #
1542 #replaygain_preamp              "0"
1543 #
1544 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1545 # By default this setting is disabled.
1546 #
1547 #replaygain_missing_preamp      "0"
1548 #
1549 # This setting enables or disables ReplayGain limiting.
1550 # MPD calculates actual amplification based on the ReplayGain tags
1551 # and replaygain_preamp / replaygain_missing_preamp setting.
1552 # If replaygain_limit is enabled MPD will never amplify audio signal
1553 # above its original level. If replaygain_limit is disabled such amplification
1554 # might occur. By default this setting is enabled.
1555 #
1556 #replaygain_limit               "yes"
1557 #
1558 # This setting enables on-the-fly normalization volume adjustment. This will
1559 # result in the volume of all playing audio to be adjusted so the output has
1560 # equal "loudness". This setting is disabled by default.
1561 #
1562 #volume_normalization           "no"
1563 #
1564 ###############################################################################
1565
1566 # Character Encoding ##########################################################
1567 #
1568 # If file or directory names do not display correctly for your locale then you
1569 # may need to modify this setting.
1570 #
1571 #filesystem_charset             "UTF-8"
1572 #
1573 ###############################################################################
1574 #+end_src
1575
1576 ** msmtp
1577 :PROPERTIES:
1578 :header-args+: :tangle ~/.msmtprc
1579 :END:
1580
1581 #+begin_src conf
1582 # Set default values for all following accounts.
1583 defaults
1584 port 587
1585 tls on
1586 auth on
1587 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1588 logfile ~/.msmtp.log
1589
1590 # aminb
1591 account aminb
1592 host mail.aminb.org
1593 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1594 tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
1595 tls_starttls on
1596 from amin@aminb.org
1597 user amin@aminb.org
1598 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1599
1600 account bandali-me : aminb
1601 from amin@bandali.me
1602
1603 # gnu
1604 account gnu
1605 host fencepost.gnu.org
1606 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1607 tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3
1608 tls_starttls on
1609 from bandali@gnu.org
1610 user bandali
1611 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1612
1613 # gnu (old)
1614 account gnu-aminb : gnu
1615 from aminb@gnu.org
1616 account gnu-amin : gnu
1617 from amin@gnu.org
1618 account gnu-mab : gnu
1619 from mab@gnu.org
1620
1621 # uwaterloo
1622 account uwaterloo
1623 host connect.uwaterloo.ca
1624 tls_starttls on
1625 from abandali@uwaterloo.ca
1626 user abandali
1627 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1628 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1629
1630 # Set a default account
1631 account default : aminb
1632 #+end_src
1633
1634 ** ncmpcpp
1635
1636 *** config
1637 :PROPERTIES:
1638 :header-args+: :tangle ~/.ncmpcpp/config
1639 :END:
1640
1641 #+begin_src conf :tangle no
1642 ##############################################################
1643 ## This is the example configuration file. Copy it to       ##
1644 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1645 ## and set up your preferences.                             ##
1646 ##############################################################
1647 #
1648 ##### directories ######
1649 ##
1650 ## Directory for storing ncmpcpp related files.
1651 ## Changing it is useful if you want to store
1652 ## everything somewhere else and provide command
1653 ## line setting for alternative location to config
1654 ## file which defines that while launching ncmpcpp.
1655 ##
1656 #
1657 ncmpcpp_directory = ~/.ncmpcpp
1658 #
1659 ##
1660 ## Directory for storing downloaded lyrics. It
1661 ## defaults to ~/.lyrics since other MPD clients
1662 ## (eg. ncmpc) also use that location.
1663 ##
1664 #
1665 #lyrics_directory = ~/.lyrics
1666 #
1667 ##### connection settings #####
1668 #
1669 #mpd_host = localhost
1670 #
1671 #mpd_port = 6600
1672 #
1673 #mpd_connection_timeout = 5
1674 #
1675 ## Needed for tag editor and file operations to work.
1676 ##
1677 mpd_music_dir = ~/usr/music
1678 #
1679 #mpd_crossfade_time = 5
1680 #
1681 ##### music visualizer #####
1682 ##
1683 ## Note: In order to make music visualizer work you'll
1684 ## need to use mpd fifo output, whose format parameter
1685 ## has to be set to 44100:16:1 for mono visualization
1686 ## or 44100:16:2 for stereo visualization. Example
1687 ## configuration (it has to be put into mpd.conf):
1688 ##
1689 ## audio_output {
1690 ##        type            "fifo"
1691 ##        name            "Visualizer feed"
1692 ##        path            "/tmp/mpd.fifo"
1693 ##        format          "44100:16:2"
1694 ## }
1695 ##
1696 #
1697 visualizer_fifo_path = /tmp/mpd.fifo
1698 #
1699 ##
1700 ## Note: Below parameter is needed for ncmpcpp
1701 ## to determine which output provides data for
1702 ## visualizer and thus allow syncing between
1703 ## visualization and sound as currently there
1704 ## are some problems with it.
1705 ##
1706 #
1707 visualizer_output_name = my fifo
1708 #
1709 ##
1710 ## If you set format to 44100:16:2, make it 'yes'.
1711 ##
1712 visualizer_in_stereo = yes
1713 #
1714 ##
1715 ## Multiply received samples by given value. Very
1716 ## useful for proper visualization of quiet music.
1717 ##
1718 #visualizer_sample_multiplier = 1
1719 #
1720 ##
1721 ## Note: Below parameter defines how often ncmpcpp
1722 ## has to "synchronize" visualizer and audio outputs.
1723 ## 30 seconds is optimal value, but if you experience
1724 ## synchronization problems, set it to lower value.
1725 ## Keep in mind that sane values start with >=10.
1726 ##
1727 #
1728 visualizer_sync_interval = 30
1729 #
1730 ##
1731 ## Note: To enable spectrum frequency visualization
1732 ## you need to compile ncmpcpp with fftw3 support.
1733 ##
1734 #
1735 ## Available values: spectrum, wave, wave_filled, ellipse.
1736 ##
1737 visualizer_type = spectrum
1738 #
1739 #visualizer_look = ●▮
1740 visualizer_look = "●•"
1741 #
1742 #visualizer_color = blue, cyan, green, yellow, magenta, red
1743 #
1744 ## Alternative subset of 256 colors for terminals that support it.
1745 ##
1746 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1747 #
1748 ##### system encoding #####
1749 ##
1750 ## ncmpcpp should detect your charset encoding
1751 ## but if it failed to do so, you can specify
1752 ## charset encoding you are using here.
1753 ##
1754 ## Note: You can see whether your ncmpcpp build
1755 ## supports charset detection by checking output
1756 ## of `ncmpcpp --version`.
1757 ##
1758 ## Note: Since MPD uses UTF-8 by default, setting
1759 ## this option makes sense only if your encoding
1760 ## is different.
1761 ##
1762 #
1763 #system_encoding = ""
1764 #
1765 ##### delays #####
1766 #
1767 ## Time of inactivity (in seconds) after playlist
1768 ## highlighting will be disabled (0 = always on).
1769 ##
1770 #playlist_disable_highlight_delay = 5
1771 #
1772 ## Defines how long messages are supposed to be visible.
1773 ##
1774 #message_delay_time = 5
1775 #
1776 ##### song format #####
1777 ##
1778 ## For a song format you can use:
1779 ##
1780 ## %l - length
1781 ## %f - filename
1782 ## %D - directory
1783 ## %a - artist
1784 ## %A - album artist
1785 ## %t - title
1786 ## %b - album
1787 ## %y - date
1788 ## %n - track number (01/12 -> 01)
1789 ## %N - full track info (01/12 -> 01/12)
1790 ## %g - genre
1791 ## %c - composer
1792 ## %p - performer
1793 ## %d - disc
1794 ## %C - comment
1795 ## %P - priority
1796 ## $R - begin right alignment
1797 ##
1798 ## If you want to make sure that a part of the format is displayed
1799 ## only when certain tags are present, you can archieve it by
1800 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1801 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1802 ## It is also possible to define a list of alternatives by providing
1803 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1804 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1805 ## present.
1806 ##
1807 ## Note: If you want to set limit on maximal length of a tag, just
1808 ## put the appropriate number between % and character that defines
1809 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1810 ##
1811 ## In addition, formats support markers used for text attributes.
1812 ## They are followed by character '$'. After that you can put:
1813 ##
1814 ## - 0 - default window color (discards all other colors)
1815 ## - 1 - black
1816 ## - 2 - red
1817 ## - 3 - green
1818 ## - 4 - yellow
1819 ## - 5 - blue
1820 ## - 6 - magenta
1821 ## - 7 - cyan
1822 ## - 8 - white
1823 ## - 9 - end of current color
1824 ## - b - bold text
1825 ## - u - underline text
1826 ## - r - reverse colors
1827 ## - a - use alternative character set
1828 ##
1829 ## If you don't want to use a non-color attribute anymore, just put it
1830 ## again, but this time insert character '/' between '$' and attribute
1831 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1832 ## or filename with reversed colors.
1833 ##
1834 ## If you want to use 256 colors and/or background colors in formats
1835 ## (the naming scheme is described below in section about color
1836 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1837 ## the artist tag to one of the non-standard colors and make it have
1838 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1839 ## that for standard colors this is interchangable with attributes
1840 ## listed above.
1841 ##
1842 ## Note: colors can be nested.
1843 ##
1844 #
1845 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1846 #
1847 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1848 #
1849 #song_library_format = {%n - }{%t}|{%f}
1850 #
1851 #
1852 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1853 #
1854 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1855 #
1856 #now_playing_prefix = $b
1857 #
1858 #now_playing_suffix = $/b
1859 #
1860 #browser_playlist_prefix = "$2playlist$9 "
1861 #
1862 #selected_item_prefix = $6
1863 #
1864 #selected_item_suffix = $9
1865 #
1866 #modified_item_prefix = $3> $9
1867 #
1868 ##
1869 ## Note: attributes are not supported for the following variables.
1870 ##
1871 #song_window_title_format = {%a - }{%t}|{%f}
1872 ##
1873 ## Note: Below variables are used for sorting songs in browser.
1874 ## The sort mode determines how songs are sorted, and can be used
1875 ## in combination with a sort format to specify a custom sorting format.
1876 ## Available values for browser_sort_mode are "name", "mtime", "format"
1877 ## and "noop".
1878 ##
1879 #
1880 #browser_sort_mode = name
1881 #
1882 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1883 #
1884 ##### columns settings #####
1885 ##
1886 ## syntax of song columns list format is "column column etc."
1887 ##
1888 ## - syntax for each column is:
1889 ##
1890 ## (width of the column)[color of the column]{displayed tag}
1891 ##
1892 ## Note: Width is by default in %, if you want a column to
1893 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1894 ## will be the column that take 10% of screen (so the real width
1895 ## will depend on actual screen size), whereas (10f)[white]{a}
1896 ## will take 10 terminal cells, no matter how wide the screen is.
1897 ##
1898 ## - color is optional (if you want the default one,
1899 ##   leave the field empty).
1900 ##
1901 ## Note: You can give a column additional attributes by putting appropriate
1902 ## character after displayed tag character. Available attributes are:
1903 ##
1904 ## - r - column will be right aligned
1905 ## - E - if tag is empty, empty tag marker won't be displayed
1906 ##
1907 ## You can also:
1908 ##
1909 ## - give a column custom name by putting it after attributes,
1910 ##   separated with character ':', e.g. {lr:Length} gives you
1911 ##   right aligned column of lengths named "Length".
1912 ##
1913 ## - define sequence of tags, that have to be displayed in case
1914 ##   predecessor is empty in a way similar to the one in classic
1915 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1916 ##   creates column named "Owner" that tries to display artist
1917 ##   tag and then composer and performer if previous ones are
1918 ##   not available.
1919 ##
1920 #
1921 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1922 #
1923 ##### various settings #####
1924 #
1925 ##
1926 ## Note: Custom command that will be executed each
1927 ## time song changes. Useful for notifications etc.
1928 ##
1929 #execute_on_song_change = ""
1930 #
1931 #playlist_show_mpd_host = no
1932 #
1933 #playlist_show_remaining_time = no
1934 #
1935 #playlist_shorten_total_times = no
1936 #
1937 #playlist_separate_albums = no
1938 #
1939 ##
1940 ## Note: Possible display modes: classic, columns.
1941 ##
1942 #playlist_display_mode = columns
1943 #
1944 #browser_display_mode = classic
1945 #
1946 #search_engine_display_mode = classic
1947 #
1948 #playlist_editor_display_mode = classic
1949 #
1950 #discard_colors_if_item_is_selected = yes
1951 #
1952 #incremental_seeking = yes
1953 #
1954 #seek_time = 1
1955 #
1956 #volume_change_step = 2
1957 #
1958 #autocenter_mode = no
1959 #
1960 #centered_cursor = no
1961 #
1962 ##
1963 ## Note: You can specify third character which will
1964 ## be used to build 'empty' part of progressbar.
1965 ##
1966 #progressbar_look = =>
1967 progressbar_look = "─╼╶"
1968 #progressbar_look = "─⊙╶"
1969 #
1970 #progressbar_boldness = yes
1971 #
1972 ## Available values: database, playlist.
1973 ##
1974 #default_place_to_search_in = database
1975 #
1976 ## Available values: classic, alternative.
1977 ##
1978 #user_interface = classic
1979 #
1980 #data_fetching_delay = yes
1981 #
1982 ## Available values: artist, album_artist, date, genre, composer, performer.
1983 ##
1984 #media_library_primary_tag = artist
1985 #
1986 ## Available values: wrapped, normal.
1987 ##
1988 #default_find_mode = wrapped
1989 #
1990 #default_tag_editor_pattern = %n - %t
1991 #
1992 #header_visibility = yes
1993 #
1994 #statusbar_visibility = yes
1995 #
1996 #titles_visibility = yes
1997 #
1998 #header_text_scrolling = yes
1999 #
2000 #cyclic_scrolling = no
2001 #
2002 #lines_scrolled = 2
2003 #
2004 #follow_now_playing_lyrics = no
2005 #
2006 #fetch_lyrics_for_current_song_in_background = no
2007 #
2008 #store_lyrics_in_song_dir = no
2009 #
2010 #generate_win32_compatible_filenames = yes
2011 #
2012 #allow_for_physical_item_deletion = no
2013 #
2014 ##
2015 ## Note: If you set this variable, ncmpcpp will try to
2016 ## get info from last.fm in language you set and if it
2017 ## fails, it will fall back to english. Otherwise it will
2018 ## use english the first time.
2019 ##
2020 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
2021 ##
2022 #lastfm_preferred_language = en
2023 #
2024 #show_hidden_files_in_local_browser = no
2025 #
2026 ##
2027 ## How shall screen switcher work?
2028 ##
2029 ## - "previous" - switch between the current and previous screen.
2030 ## - "screen1,...,screenN" - switch between given sequence of screens.
2031 ##
2032 ## Screens available for use: help, playlist, browser, search_engine,
2033 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
2034 ##
2035 #screen_switcher_mode = playlist, browser
2036 #
2037 ##
2038 ## Note: You can define startup screen
2039 ## by choosing screen from the list above.
2040 ##
2041 #startup_screen = playlist
2042 #
2043 ##
2044 ## Note: You can define startup slave screen
2045 ## by choosing screen from the list above or
2046 ## an empty value for no slave screen.
2047 ##
2048 #startup_slave_screen = ""
2049 #
2050 #startup_slave_screen_focus = no
2051 #
2052 ##
2053 ## Default width of locked screen (in %).
2054 ## Acceptable values are from 20 to 80.
2055 ##
2056 #
2057 #locked_screen_width_part = 50
2058 #
2059 #ask_for_locked_screen_width_part = yes
2060 #
2061 #jump_to_now_playing_song_at_start = yes
2062 #
2063 #ask_before_clearing_playlists = yes
2064 #
2065 #clock_display_seconds = no
2066 #
2067 #display_volume_level = yes
2068 #
2069 #display_bitrate = no
2070 #
2071 #display_remaining_time = no
2072 #
2073 ## Available values: none, basic, extended, perl.
2074 ##
2075 #regular_expressions = perl
2076 #
2077 ##
2078 ## Note: If below is enabled, ncmpcpp will ignore leading
2079 ## "The" word while sorting items in browser, tags in
2080 ## media library, etc.
2081 ##
2082 #ignore_leading_the = no
2083 #
2084 #block_search_constraints_change_if_items_found = yes
2085 #
2086 #mouse_support = yes
2087 #
2088 #mouse_list_scroll_whole_page = yes
2089 #
2090 #empty_tag_marker = <empty>
2091 #
2092 #tags_separator = " | "
2093 #
2094 #tag_editor_extended_numeration = no
2095 #
2096 #media_library_sort_by_mtime = no
2097 #
2098 #enable_window_title = yes
2099 #
2100 ##
2101 ## Note: You can choose default search mode for search
2102 ## engine. Available modes are:
2103 ##
2104 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2105 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2106 ##       but if your mpd is on a remote machine, downloading big database
2107 ##       to process it can take a while
2108 ## - 3 - match only exact values (this mode uses mpd function for searching
2109 ##       in database and local one for searching in current playlist)
2110 ##
2111 #
2112 #search_engine_default_search_mode = 1
2113 #
2114 #external_editor = nano
2115 #
2116 ## Note: set to yes if external editor is a console application.
2117 ##
2118 #use_console_editor = yes
2119 #
2120 ##### colors definitions #####
2121 ##
2122 ## It is possible to set a background color by setting a color
2123 ## value "<foreground>_<background>", e.g. red_black will set
2124 ## foregound color to red and background color to black.
2125 ##
2126 ## In addition, for terminals that support 256 colors it
2127 ## is possible to set one of them by using a number in range
2128 ## [1, 256] instead of color name, e.g. numerical value
2129 ## corresponding to red_black is 2_1. To find out if the
2130 ## terminal supports 256 colors, run ncmpcpp and check out
2131 ## the bottom of the help screen for list of available colors
2132 ## and their numerical values.
2133 ##
2134 ## Note: due to technical limitations of ncurses, if 256 colors
2135 ## are used, it is possible to either use only the colors with
2136 ## default background color, or all pairs from 1_1 up to 254_127,
2137 ## depending on the ncurses version used.
2138 ##
2139 #
2140 #colors_enabled = yes
2141 #
2142 #empty_tag_color = cyan
2143 #
2144 #header_window_color = default
2145 #
2146 #volume_color = default
2147 #
2148 #state_line_color = default
2149 #
2150 #state_flags_color = default
2151 #
2152 #main_window_color = yellow
2153 #
2154 #color1 = white
2155 #
2156 #color2 = green
2157 #
2158 #main_window_highlight_color = yellow
2159 #
2160 #progressbar_color = black
2161 #
2162 #progressbar_elapsed_color = green
2163 #
2164 #statusbar_color = default
2165 #
2166 #alternative_ui_separator_color = black
2167 #
2168 #active_column_color = red
2169 #
2170 #window_border_color = green
2171 #
2172 #active_window_border = red
2173 #
2174 #+end_src
2175
2176 *** bindings
2177 :PROPERTIES:
2178 :header-args+: :tangle ~/.ncmpcpp/bindings
2179 :END:
2180
2181 #+begin_src conf :tangle no
2182 def_key "j"
2183     scroll_down
2184 def_key "k"
2185     scroll_up
2186
2187 def_key "ctrl-u"
2188     page_up
2189 def_key "ctrl-d"
2190     page_down
2191
2192 def_key "h"
2193     previous_column
2194 def_key "l"
2195     next_column
2196
2197 def_key "."
2198     show_lyrics
2199
2200 def_key "n"
2201     next_found_item
2202 def_key "N"
2203     previous_found_item
2204
2205 def_key "J"
2206     move_sort_order_down
2207 def_key "K"
2208     move_sort_order_up
2209 #+end_src
2210
2211 ** notmuch
2212
2213 *** notmuch-config
2214 :PROPERTIES:
2215 :header-args+: :tangle ~/.notmuch-config
2216 :END:
2217
2218 #+begin_src conf
2219 # .notmuch-config - Configuration file for the notmuch mail system
2220 #
2221 # For more information about notmuch, see https://notmuchmail.org
2222
2223 # Database configuration
2224 #
2225 # The only value supported here is 'path' which should be the top-level
2226 # directory where your mail currently exists and to where mail will be
2227 # delivered in the future. Files should be individual email messages.
2228 # Notmuch will store its database within a sub-directory of the path
2229 # configured here named ".notmuch".
2230 #
2231 [database]
2232 path=/home/amin/oldmail
2233
2234 # User configuration
2235 #
2236 # Here is where you can let notmuch know how you would like to be
2237 # addressed. Valid settings are
2238 #
2239 #       name            Your full name.
2240 #       primary_email   Your primary email address.
2241 #       other_email     A list (separated by ';') of other email addresses
2242 #                       at which you receive email.
2243 #
2244 # Notmuch will use the various email addresses configured here when
2245 # formatting replies. It will avoid including your own addresses in the
2246 # recipient list of replies, and will set the From address based on the
2247 # address to which the original email was addressed.
2248 #
2249 [user]
2250 name=Amin Bandali
2251 primary_email=amin@aminb.org
2252 other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2253
2254 # Configuration for "notmuch new"
2255 #
2256 # The following options are supported here:
2257 #
2258 #       tags    A list (separated by ';') of the tags that will be
2259 #               added to all messages incorporated by "notmuch new".
2260 #
2261 #       ignore  A list (separated by ';') of file and directory names
2262 #               that will not be searched for messages by "notmuch new".
2263 #
2264 #               NOTE: *Every* file/directory that goes by one of those
2265 #               names will be ignored, independent of its depth/location
2266 #               in the mail store.
2267 #
2268 [new]
2269 tags=new;
2270 #tags=unread;inbox;
2271 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2272
2273 # Search configuration
2274 #
2275 # The following option is supported here:
2276 #
2277 #       exclude_tags
2278 #               A ;-separated list of tags that will be excluded from
2279 #               search results by default.  Using an excluded tag in a
2280 #               query will override that exclusion.
2281 #
2282 [search]
2283 exclude_tags=deleted;spam;
2284
2285 # Maildir compatibility configuration
2286 #
2287 # The following option is supported here:
2288 #
2289 #       synchronize_flags      Valid values are true and false.
2290 #
2291 #       If true, then the following maildir flags (in message filenames)
2292 #       will be synchronized with the corresponding notmuch tags:
2293 #
2294 #               Flag    Tag
2295 #               ----    -------
2296 #               D       draft
2297 #               F       flagged
2298 #               P       passed
2299 #               R       replied
2300 #               S       unread (added when 'S' flag is not present)
2301 #
2302 #       The "notmuch new" command will notice flag changes in filenames
2303 #       and update tags, while the "notmuch tag" and "notmuch restore"
2304 #       commands will notice tag changes and update flags in filenames
2305 #
2306 [maildir]
2307 synchronize_flags=true
2308
2309 # Cryptography related configuration
2310 #
2311 # The following option is supported here:
2312 #
2313 #       gpg_path
2314 #               binary name or full path to invoke gpg.
2315 #
2316 [crypto]
2317 gpg_path=gpg
2318 #+end_src
2319
2320 *** pre-new hook
2321 :PROPERTIES:
2322 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2323 :END:
2324
2325 #+begin_src sh
2326 touch /tmp/gnusieve.log
2327 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2328              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2329 #+end_src
2330
2331 *** post-new hook
2332 :PROPERTIES:
2333 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2334 :END:
2335
2336 #+begin_src sh
2337 # apply sent tag to messages sent by me
2338 notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2339
2340 # initial tagging
2341 notmuch tag -latest                     -- tag:latest
2342 notmuch tag +inbox +unread +latest -new -- tag:new
2343
2344
2345 # apply tags to lists
2346
2347 # <aminb>
2348 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2349 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2350
2351 notmuch tag -inbox +pay     -- folder:amin/pay
2352 notmuch tag -inbox +banking -- folder:amin/banking
2353 notmuch tag -inbox +work    -- folder:amin/work
2354 # </aminb>
2355
2356 # <uw>
2357 notmuch tag -inbox +uw/cs136  -- folder:uwaterloo/lists/cs136
2358 notmuch tag -inbox +uw/cs846  -- folder:uwaterloo/lists/cs846
2359 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2360 notmuch tag -inbox +uw/se212  -- folder:uwaterloo/lists/se212
2361 notmuch tag -inbox +uw/se463  -- folder:uwaterloo/lists/se463
2362
2363 notmuch tag -inbox +lists/alloytools       -- folder:uwaterloo/lists/alloytools
2364 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2365 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2366 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2367 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2368 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2369 # </uw>
2370
2371 # <gnu>
2372 notmuch tag -inbox +l/emacs-devel       -- folder:gnu/l/emacs-devel
2373 notmuch tag -inbox +l/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2374 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2375 notmuch tag -inbox +l/fencepost-users   -- folder:gnu/l/fencepost-users
2376 notmuch tag -inbox +l/guix-devel        -- folder:gnu/l/guix-devel
2377 notmuch tag -inbox +l/guile-devel       -- folder:gnu/l/guile-devel
2378 notmuch tag -inbox +l/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2379 notmuch tag -inbox +l/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2380 notmuch tag -inbox +l/www-commits       -- folder:gnu/l/www-commits
2381 notmuch tag -inbox +l/www-discuss       -- folder:gnu/l/www-discuss
2382 notmuch tag -inbox +webmasters          -- folder:gnu/webmasters
2383
2384 notmuch tag -inbox +l/deepspec     -- folder:gnu/l/deepspec
2385 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2386 notmuch tag -inbox +l/haskell-art  -- folder:gnu/l/haskell-art
2387 notmuch tag -inbox +l/notmuch      -- folder:gnu/l/notmuch
2388
2389 notmuch tag -inbox +l/~aminb/test-priv         -- folder:gnu/l/~aminb/test-priv
2390 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins   -- folder:gnu/l/~sircmpwn/sr.ht-admins
2391 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2392 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev      -- folder:gnu/l/~sircmpwn/sr.ht-dev
2393 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss  -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2394 # </gnu>
2395
2396 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2397 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2398 #+end_src
2399
2400 *** notmuch.service
2401 :PROPERTIES:
2402 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2403 :END:
2404
2405 #+begin_src conf :tangle no
2406 [Unit]
2407 Description=notmuch service
2408
2409 [Service]
2410 Type=oneshot
2411 ExecStart=/usr/bin/notmuch new
2412 StandardOutput=syslog
2413 StandardError=syslog
2414 #+end_src
2415
2416 *** notmuch.timer
2417 :PROPERTIES:
2418 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2419 :END:
2420
2421 #+begin_src conf :tangle no
2422 [Unit]
2423 Description=notmuch timer
2424
2425 [Timer]
2426 OnCalendar=*:0/5
2427 Persistent=true
2428 Unit=notmuch.service
2429
2430 [Install]
2431 WantedBy=timers.target
2432 #+end_src
2433
2434 ** offlineimap
2435
2436 *** offlineimaprc
2437 :PROPERTIES:
2438 :header-args+: :tangle ~/.offlineimaprc
2439 :END:
2440
2441 #+begin_src conf :tangle no
2442 [general]
2443 pythonfile = ~/.offlineimap.py
2444 accounts = Gmail, aminb
2445 maxsyncaccounts = 3
2446
2447 [Account Gmail]
2448 localrepository = GmailL
2449 remoterepository = GmailR
2450
2451 [Account aminb]
2452 localrepository = aminbL
2453 remoterepository = aminbR
2454
2455 [Repository GmailL]
2456 type = Maildir
2457 localfolders = ~/Maildir/Gmail
2458
2459 [Repository GmailR]
2460 type = IMAP
2461 remotehost = imap.gmail.com
2462 remoteusereval = mailuser("gmail")
2463 remotepasseval = mailpasswd("gmail")
2464 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2465 ssl = yes
2466 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2467 maxconnections = 1
2468 realdelete = no
2469
2470 [Repository aminbL]
2471 type = Maildir
2472 localfolders = ~/Maildir/aminb
2473
2474 [Repository aminbR]
2475 type = IMAP
2476 remotehost = mail.aminb.org
2477 remoteusereval = mailuser("aminb")
2478 remotepasseval = mailpasswd("aminb")
2479 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2480 ssl = yes
2481 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2482 maxconnections = 1
2483 realdelete = no
2484 #+end_src
2485
2486 *** offlineimap.py
2487 :PROPERTIES:
2488 :header-args+: :tangle ~/.offlineimap.py
2489 :END:
2490
2491 #+begin_src python :tangle no
2492 import os
2493 import subprocess
2494
2495 def mailpasswd(acct):
2496     acct = os.path.basename(acct)
2497     path = "/home/amin/.passwd/%s.gpg" % acct
2498     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2499     try:
2500         return subprocess.check_output(args).strip()
2501     except subprocess.CalledProcessError:
2502         return ""
2503
2504 def mailuser(acct):
2505     acct = os.path.basename(acct)
2506     path = "/home/amin/.passwd/%s" % acct
2507     args = ["cat", path]
2508     try:
2509         return subprocess.check_output(args).strip()
2510     except subprocess.CalledProcessError:
2511         return ""
2512
2513 def prime_gpg_agent():
2514   ret = False
2515   i = 1
2516   while not ret:
2517     ret = (mailpasswd("prime") == "prime")
2518     if i > 2:
2519       from offlineimap.ui import getglobalui
2520       sys.stderr.write("Error reading in passwords. Terminating.\n")
2521       getglobalui().terminate()
2522     i += 1
2523   return ret
2524
2525 prime_gpg_agent()
2526 #+end_src
2527
2528 ** pigeonhole
2529 *** amin.sieve
2530 :PROPERTIES:
2531 :header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none
2532 :END:
2533
2534 #+begin_src conf
2535 require ["regex", "variables", "fileinto", "envelope",
2536          "mailbox", "imap4flags", "include"];
2537
2538 # webmasters
2539 if anyof (
2540   address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
2541   fileinto :create "gnu.webmasters";
2542   stop;
2543 }
2544
2545 include :personal "lists";
2546 #+end_src
2547
2548 *** lists.sieve
2549 :PROPERTIES:
2550 :header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none
2551 :END:
2552
2553 #+begin_src conf
2554 require ["regex", "variables", "fileinto", "envelope",
2555          "mailbox", "imap4flags", "include"];
2556
2557 # mailing lists
2558 if anyof (
2559     header :contains "list-id"
2560         [ "<emacs-devel.gnu.org>"
2561         , "<emacs-orgmode.gnu.org>"
2562         , "<emacsconf-discuss.gnu.org>"
2563         , "<fencepost-users.gnu.org>"
2564         , "<guix-devel.gnu.org>"
2565         , "<guile-devel.gnu.org>"
2566         , "<help-gnu-emacs.gnu.org>"
2567         , "<info-gnu-emacs.gnu.org>"
2568         , "<info-guix.gnu.org>"
2569         , "<www-commits.gnu.org>"
2570         , "<www-discuss.gnu.org>"
2571         , "<deepspec.lists.cs.princeton.edu>"
2572         , "<haskell-cafe.haskell.org>"
2573         , "<haskell-art.we.lurk.org>"
2574         , "<notmuch.notmuchmail.org>"
2575         ] ) {
2576     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2577         set :lower "listname" "${1}";
2578         fileinto :create "gnu.${listname}";
2579         stop;
2580     }
2581 }
2582
2583 # sr.ht lists, with dots ('.') omitted
2584 if anyof (
2585     header :contains "list-id"
2586         [ "<~bandali/public-inbox@lists.sr.ht>"
2587         , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
2588         , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
2589         , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
2590         , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
2591         ] ) {
2592     if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
2593         set :lower "username" "${1}";
2594         set :lower "listname" "${2}${3}${4}${5}${6}${7}";
2595         fileinto :create "gnu.${username}.${listname}";
2596         stop;
2597     }
2598 }
2599 #+end_src
2600
2601 ** polybar
2602
2603 *** config
2604 :PROPERTIES:
2605 :header-args+: :tangle ~/.config/polybar/config
2606 :END:
2607
2608 #+begin_src conf :tangle no
2609 ;=====================================================
2610 ;
2611 ;   To learn more about how to configure Polybar
2612 ;   go to https://github.com/jaagr/polybar
2613 ;
2614 ;   The README contains alot of information
2615 ;
2616 ;=====================================================
2617
2618 [colors]
2619 ;background = ${xrdb:color0:#222}
2620 background = #222
2621 background-alt = #444
2622 ;foreground = ${xrdb:color7:#222}
2623 foreground = #eee
2624 foreground-alt = #888
2625 primary = #ffb52a
2626 secondary = #e60053
2627 alert = #bd2c40
2628
2629 [bar/main]
2630 ;monitor = ${env:MONITOR:HDMI-1}
2631 width = 100%
2632 height = 27
2633 ;offset-x = 1%
2634 ;offset-y = 1%
2635 radius = 3.0
2636 fixed-center = true
2637
2638 background = ${colors.background}
2639 foreground = ${colors.foreground}
2640
2641 line-size = 3
2642 line-color = #f00
2643
2644 border-size = 4
2645 border-color = #00000000
2646
2647 padding-left = 0
2648 padding-right = 2
2649
2650 module-margin-left = 2
2651 module-margin-right = 2
2652
2653 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2654 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2655 font-2 = Wuncon Siji:pixelsize=10;1
2656 font-3 = FontAwesome:pixelsize=10;1
2657
2658 modules-left = bspwm xwindow
2659 modules-center =
2660 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2661
2662 tray-position = right
2663 tray-padding = 1
2664 ;tray-transparent = true
2665 ;tray-background = #0063ff
2666 tray-maxsize = 18
2667
2668 wm-restack = bspwm
2669
2670 ;override-redirect = true
2671
2672 scroll-up = bspwm-desknext
2673 scroll-down = bspwm-deskprev
2674
2675 [module/xwindow]
2676 type = internal/xwindow
2677 label = %title:0:50:...%
2678
2679 [module/xkeyboard]
2680 type = internal/xkeyboard
2681 blacklist-0 = num lock
2682
2683 format-prefix = " "
2684 format-prefix-foreground = ${colors.foreground-alt}
2685 format-prefix-underline = ${colors.secondary}
2686
2687 label-layout = %layout%
2688 label-layout-underline = ${colors.secondary}
2689
2690 label-indicator-padding = 2
2691 label-indicator-margin = 1
2692 label-indicator-background = ${colors.secondary}
2693 label-indicator-underline = ${colors.secondary}
2694
2695 [module/filesystem]
2696 type = internal/fs
2697 interval = 25
2698
2699 mount-0 = /
2700
2701 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2702 label-unmounted = %mountpoint% not mounted
2703 label-unmounted-foreground = ${colors.foreground-alt}
2704
2705 [module/bspwm]
2706 type = internal/bspwm
2707
2708 label-focused = %index%
2709 label-focused-background = ${colors.background-alt}
2710 label-focused-underline= ${colors.primary}
2711 label-focused-padding = 2
2712
2713 label-occupied = %index%
2714 label-occupied-padding = 2
2715
2716 label-urgent = %index%!
2717 label-urgent-background = ${colors.alert}
2718 label-urgent-padding = 2
2719
2720 label-empty = %index%
2721 label-empty-foreground = ${colors.foreground-alt}
2722 label-empty-padding = 2
2723
2724 [module/i3]
2725 type = internal/i3
2726 format = <label-state> <label-mode>
2727 index-sort = true
2728 wrapping-scroll = false
2729
2730 ; Only show workspaces on the same output as the bar
2731 ;pin-workspaces = true
2732
2733 label-mode-padding = 2
2734 label-mode-foreground = #000
2735 label-mode-background = ${colors.primary}
2736
2737 ; focused = Active workspace on focused monitor
2738 label-focused = %index%
2739 label-focused-background = ${module/bspwm.label-focused-background}
2740 label-focused-underline = ${module/bspwm.label-focused-underline}
2741 label-focused-padding = ${module/bspwm.label-focused-padding}
2742
2743 ; unfocused = Inactive workspace on any monitor
2744 label-unfocused = %index%
2745 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2746
2747 ; visible = Active workspace on unfocused monitor
2748 label-visible = %index%
2749 label-visible-background = ${self.label-focused-background}
2750 label-visible-underline = ${self.label-focused-underline}
2751 label-visible-padding = ${self.label-focused-padding}
2752
2753 ; urgent = Workspace with urgency hint set
2754 label-urgent = %index%
2755 label-urgent-background = ${module/bspwm.label-urgent-background}
2756 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2757
2758 [module/mpd]
2759 type = internal/mpd
2760 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2761
2762 icon-prev = 
2763 icon-stop = 
2764 icon-play = 
2765 icon-pause = 
2766 icon-next = 
2767
2768 label-song-maxlen = 25
2769 label-song-ellipsis = true
2770
2771 [module/xbacklight]
2772 type = internal/xbacklight
2773
2774 format = <label> <bar>
2775 label = BL
2776
2777 bar-width = 10
2778 bar-indicator = |
2779 bar-indicator-foreground = #ff
2780 bar-indicator-font = 2
2781 bar-fill = ─
2782 bar-fill-font = 2
2783 bar-fill-foreground = #9f78e1
2784 bar-empty = ─
2785 bar-empty-font = 2
2786 bar-empty-foreground = ${colors.foreground-alt}
2787
2788 [module/backlight-acpi]
2789 inherit = module/xbacklight
2790 type = internal/backlight
2791 ;card = intel_backlight
2792 card = mba6x_backlight
2793
2794 [module/cpu]
2795 type = internal/cpu
2796 interval = 2
2797 format-prefix = " "
2798 format-prefix-foreground = ${colors.foreground-alt}
2799 format-underline = #f90000
2800 label = %percentage%%
2801
2802 [module/memory]
2803 type = internal/memory
2804 interval = 2
2805 format-prefix = " "
2806 format-prefix-foreground = ${colors.foreground-alt}
2807 format-underline = #4bffdc
2808 label = %percentage_used%%
2809
2810 [module/wlan]
2811 type = internal/network
2812 interface =
2813 interval = 3.0
2814
2815 format-connected = <ramp-signal> <label-connected>
2816 format-connected-underline = #9f78e1
2817 label-connected = %essid%
2818
2819 format-disconnected =
2820 ;format-disconnected = <label-disconnected>
2821 ;format-disconnected-underline = ${self.format-connected-underline}
2822 ;label-disconnected = %ifname% disconnected
2823 ;label-disconnected-foreground = ${colors.foreground-alt}
2824
2825 ramp-signal-0 = 
2826 ramp-signal-1 = 
2827 ramp-signal-2 = 
2828 ramp-signal-3 = 
2829 ramp-signal-4 = 
2830 ramp-signal-foreground = ${colors.foreground-alt}
2831
2832 [module/eth]
2833 type = internal/network
2834 interface =
2835 interval = 3.0
2836
2837 format-connected-underline = #55aa55
2838 format-connected-prefix = " "
2839 format-connected-prefix-foreground = ${colors.foreground-alt}
2840 label-connected = %local_ip%
2841
2842 format-disconnected =
2843 ;format-disconnected = <label-disconnected>
2844 ;format-disconnected-underline = ${self.format-connected-underline}
2845 ;label-disconnected = %ifname% disconnected
2846 ;label-disconnected-foreground = ${colors.foreground-alt}
2847
2848 [module/date]
2849 type = internal/date
2850 interval = 5
2851
2852 date =
2853 date-alt = " %Y-%m-%d"
2854
2855 time = %H:%M
2856 time-alt = %H:%M:%S
2857
2858 format-prefix = 
2859 format-prefix-foreground = ${colors.foreground-alt}
2860 format-underline = #0a6cf5
2861
2862 label = %date% %time%
2863
2864 [module/volume]
2865 type = internal/volume
2866
2867 format-volume = <label-volume> <bar-volume>
2868 label-volume = vol
2869 label-volume-foreground = ${root.foreground}
2870
2871 format-muted-prefix = " "
2872 format-muted-foreground = ${colors.foreground-alt}
2873 label-muted = mute
2874
2875 bar-volume-width = 10
2876 bar-volume-foreground-0 = #55aa55
2877 bar-volume-foreground-1 = #55aa55
2878 bar-volume-foreground-2 = #55aa55
2879 bar-volume-foreground-3 = #55aa55
2880 bar-volume-foreground-4 = #55aa55
2881 bar-volume-foreground-5 = #f5a70a
2882 bar-volume-foreground-6 = #ff5555
2883 bar-volume-gradient = false
2884 bar-volume-indicator = |
2885 bar-volume-indicator-font = 2
2886 bar-volume-fill = ─
2887 bar-volume-fill-font = 2
2888 bar-volume-empty = ─
2889 bar-volume-empty-font = 2
2890 bar-volume-empty-foreground = ${colors.foreground-alt}
2891
2892 [module/battery]
2893 type = internal/battery
2894 battery = BAT0
2895 adapter = ADP1
2896 full-at = 64
2897
2898 format-charging = <animation-charging> <label-charging>
2899 format-charging-underline = #ffb52a
2900
2901 format-discharging = <ramp-capacity> <label-discharging>
2902 format-discharging-underline = ${self.format-charging-underline}
2903
2904 format-full-prefix = " "
2905 format-full-prefix-foreground = ${colors.foreground-alt}
2906 format-full-underline = ${self.format-charging-underline}
2907
2908 ramp-capacity-0 = 
2909 ramp-capacity-1 = 
2910 ramp-capacity-2 = 
2911 ramp-capacity-foreground = ${colors.foreground-alt}
2912
2913 animation-charging-0 = 
2914 animation-charging-1 = 
2915 animation-charging-2 = 
2916 animation-charging-foreground = ${colors.foreground-alt}
2917 animation-charging-framerate = 750
2918
2919 [module/temperature]
2920 type = internal/temperature
2921 thermal-zone = 1
2922 warn-temperature = 66
2923
2924 format = <ramp> <label>
2925 format-underline = #f50a4d
2926 format-warn = <ramp> <label-warn>
2927 format-warn-underline = ${self.format-underline}
2928
2929 label = %temperature%
2930 label-warn = %temperature%
2931 label-warn-foreground = ${colors.secondary}
2932
2933 ramp-0 = 
2934 ramp-1 = 
2935 ramp-2 = 
2936 ramp-foreground = ${colors.foreground-alt}
2937
2938 [module/powermenu]
2939 type = custom/menu
2940
2941 format-spacing = 1
2942
2943 label-open = 
2944 label-open-foreground = ${colors.secondary}
2945 label-close =  cancel
2946 label-close-foreground = ${colors.secondary}
2947 label-separator = |
2948 label-separator-foreground = ${colors.foreground-alt}
2949
2950 menu-0-0 = reboot
2951 menu-0-0-exec = menu-open-1
2952 menu-0-1 = power off
2953 menu-0-1-exec = menu-open-2
2954
2955 menu-1-0 = cancel
2956 menu-1-0-exec = menu-open-0
2957 menu-1-1 = reboot
2958 menu-1-1-exec = sudo reboot
2959
2960 menu-2-0 = power off
2961 menu-2-0-exec = sudo poweroff
2962 menu-2-1 = cancel
2963 menu-2-1-exec = menu-open-0
2964
2965 [module/mail]
2966 type = custom/script
2967 interval = 60
2968 format = <label>
2969 format-prefix = " "
2970 format-prefix-foreground = ${colors.foreground-alt}
2971 format-underline = #0a6cf5
2972 exec = notmuch count tag:unread
2973
2974 [settings]
2975 screenchange-reload = true
2976 ;compositing-background = xor
2977 ;compositing-background = screen
2978 ;compositing-foreground = source
2979 ;compositing-border = over
2980
2981 [global/wm]
2982 margin-top = 0
2983 margin-bottom = 0
2984
2985 ; vim:ft=dosini
2986 #+end_src
2987
2988 *** polybar-launch
2989 :PROPERTIES:
2990 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2991 :END:
2992
2993 #+begin_src sh :tangle no
2994 # Terminate already running bar instances
2995 killall -q polybar
2996
2997 # Wait until the processes have been shut down
2998 while pgrep -x polybar >/dev/null; do sleep 1; done
2999
3000 # Launch main bar
3001 polybar main &
3002
3003 echo "Bars launched..."
3004 #+end_src
3005
3006 ** PowerTOP
3007 :PROPERTIES:
3008 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
3009 :END:
3010
3011 #+begin_src conf
3012 [Unit]
3013 Description=Powertop tunings
3014
3015 [Service]
3016 ExecStart=/usr/bin/powertop --auto-tune
3017 RemainAfterExit=true
3018
3019 [Install]
3020 WantedBy=multi-user.target
3021 #+end_src
3022
3023 ** ranger
3024
3025 *** rc.conf
3026 :PROPERTIES:
3027 :header-args+: :tangle ~/.config/ranger/rc.conf
3028 :END:
3029
3030 #+begin_src conf :tangle no
3031 # ===================================================================
3032 # This file contains the default startup commands for ranger.
3033 # To change them, it is recommended to create the file
3034 # ~/.config/ranger/rc.conf and add your custom commands there.
3035 #
3036 # If you copy this whole file there, you may want to set the environment
3037 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
3038 #
3039 # The purpose of this file is mainly to define keybindings and settings.
3040 # For running more complex python code, please create a plugin in "plugins/" or
3041 # a command in "commands.py".
3042 #
3043 # Each line is a command that will be run before the user interface
3044 # is initialized.  As a result, you can not use commands which rely
3045 # on the UI such as :delete or :mark.
3046 # ===================================================================
3047
3048 # ===================================================================
3049 # == Options
3050 # ===================================================================
3051
3052 # How many columns are there, and what are their relative widths?
3053 set column_ratios 1,3,4
3054
3055 # Which files should be hidden? (regular expression)
3056 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
3057
3058 # Show hidden files? You can toggle this by typing 'zh'
3059 set show_hidden false
3060
3061 # Ask for a confirmation when running the "delete" command?
3062 # Valid values are "always" (default), "never", "multiple"
3063 # With "multiple", ranger will ask only if you delete multiple files at once.
3064 set confirm_on_delete multiple
3065
3066 # Which script is used to generate file previews?
3067 # ranger ships with scope.sh, a script that calls external programs (see
3068 # README for dependencies) to preview images, archives, etc.
3069 set preview_script ~/.config/ranger/scope.sh
3070
3071 # Use the external preview script or display simple plain text previews?
3072 set use_preview_script true
3073
3074 # Open all images in this directory when running certain image viewers
3075 # like feh or sxiv?  You can still open selected files by marking them.
3076 set open_all_images true
3077
3078 # Be aware of version control systems and display information.
3079 set vcs_aware false
3080
3081 # State of the three backends git, hg, bzr. The possible states are
3082 # disabled, local (only show local info), enabled (show local and remote
3083 # information).
3084 set vcs_backend_git enabled
3085 set vcs_backend_hg disabled
3086 set vcs_backend_bzr disabled
3087
3088 # Preview images in full color with the external command "w3mimgpreview"?
3089 # This requires the console web browser "w3m" and a supported terminal.
3090 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3091 set preview_images true
3092
3093 # Use a unicode "..." character to mark cut-off filenames?
3094 set unicode_ellipsis false
3095
3096 # Show dotfiles in the bookmark preview box?
3097 set show_hidden_bookmarks true
3098
3099 # Which colorscheme to use?  These colorschemes are available by default:
3100 # default, jungle, snow
3101 set colorscheme default
3102
3103 # Preview files on the rightmost column?
3104 # And collapse (shrink) the last column if there is nothing to preview?
3105 set preview_files true
3106 set preview_directories true
3107 set collapse_preview true
3108
3109 # Save the console history on exit?
3110 set save_console_history true
3111
3112 # Draw the status bar on top of the browser window (default: bottom)
3113 set status_bar_on_top false
3114
3115 # Draw a progress bar in the status bar which displays the average state of all
3116 # currently running tasks which support progress bars?
3117 set draw_progress_bar_in_status_bar true
3118
3119 # Draw borders around columns?
3120 set draw_borders true
3121
3122 # Display the directory name in tabs?
3123 set dirname_in_tabs false
3124
3125 # Enable the mouse support?
3126 set mouse_enabled true
3127
3128 # Display the file size in the main column or status bar?
3129 set display_size_in_main_column true
3130 set display_size_in_status_bar true
3131
3132 # Display files tags in all columns or only in main column?
3133 set display_tags_in_all_columns true
3134
3135 # Set a title for the window?
3136 set update_title false
3137
3138 # Set the title to "ranger" in the tmux program?
3139 set update_tmux_title false
3140
3141 # Shorten the title if it gets long?  The number defines how many
3142 # directories are displayed at once, 0 turns off this feature.
3143 set shorten_title 3
3144
3145 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3146 set tilde_in_titlebar false
3147
3148 # How many directory-changes or console-commands should be kept in history?
3149 set max_history_size 20
3150 set max_console_history_size 50
3151
3152 # Try to keep so much space between the top/bottom border when scrolling:
3153 set scroll_offset 8
3154
3155 # Flush the input after each key hit?  (Noticable when ranger lags)
3156 set flushinput true
3157
3158 # Padding on the right when there's no preview?
3159 # This allows you to click into the space to run the file.
3160 set padding_right true
3161
3162 # Save bookmarks (used with mX and `X) instantly?
3163 # This helps to synchronize bookmarks between multiple ranger
3164 # instances but leads to *slight* performance loss.
3165 # When false, bookmarks are saved when ranger is exited.
3166 set autosave_bookmarks true
3167
3168 # You can display the "real" cumulative size of directories by using the
3169 # command :get_cumulative_size or typing "dc".  The size is expensive to
3170 # calculate and will not be updated automatically.  You can choose
3171 # to update it automatically though by turning on this option:
3172 set autoupdate_cumulative_size false
3173
3174 # Turning this on makes sense for screen readers:
3175 set show_cursor false
3176
3177 # One of: size, basename, mtime, type
3178 set sort natural
3179
3180 # Additional sorting options
3181 set sort_reverse false
3182 set sort_case_insensitive true
3183 set sort_directories_first true
3184
3185 # Enable this if key combinations with the Alt Key don't work for you.
3186 # (Especially on xterm)
3187 set xterm_alt_key false
3188
3189 # ===================================================================
3190 # == Local Options
3191 # ===================================================================
3192 # You can set local options that only affect a single directory.
3193
3194 # Examples:
3195 # setlocal path=~/downloads sort mtime
3196
3197 # ===================================================================
3198 # == Command Aliases in the Console
3199 # ===================================================================
3200
3201 alias e    edit
3202 alias q    quit
3203 alias q!   quitall
3204 alias qall quitall
3205 alias setl setlocal
3206
3207 alias filter     scout -prt
3208 alias find       scout -aet
3209 alias mark       scout -mr
3210 alias unmark     scout -Mr
3211 alias search     scout -rs
3212 alias search_inc scout -rts
3213 alias travel     scout -aefiklst
3214
3215 # ===================================================================
3216 # == Define keys for the browser
3217 # ===================================================================
3218
3219 # Basic
3220 map     Q quit!
3221 map     q quit
3222 copymap q ZZ ZQ
3223
3224 map R     reload_cwd
3225 map <C-r> reset
3226 map <C-l> redraw_window
3227 map <C-c> abort
3228 map <esc> change_mode normal
3229
3230 map i display_file
3231 map ? help
3232 map W display_log
3233 map w taskview_open
3234 map S shell $SHELL
3235
3236 map :  console
3237 map ;  console
3238 map !  console shell
3239 map @  console -p6 shell  %%s
3240 map #  console shell -p
3241 map s  console shell
3242 map r  chain draw_possible_programs; console open_with
3243 map f  console find
3244 map cd console cd
3245
3246 # Tagging / Marking
3247 map t       tag_toggle
3248 map ut      tag_remove
3249 map "<any>  tag_toggle tag=%any
3250 map <Space> mark_files toggle=True
3251 map v       mark_files all=True toggle=True
3252 map uv      mark_files all=True val=False
3253 map V       toggle_visual_mode
3254 map uV      toggle_visual_mode reverse=True
3255
3256 # For the nostalgics: Midnight Commander bindings
3257 map <F1> help
3258 map <F3> display_file
3259 map <F4> edit
3260 map <F5> copy
3261 map <F6> cut
3262 map <F7> console mkdir
3263 map <F8> console delete
3264 map <F10> exit
3265
3266 # In case you work on a keyboard with dvorak layout
3267 map <UP>       move up=1
3268 map <DOWN>     move down=1
3269 map <LEFT>     move left=1
3270 map <RIGHT>    move right=1
3271 map <HOME>     move to=0
3272 map <END>      move to=-1
3273 map <PAGEDOWN> move down=1   pages=True
3274 map <PAGEUP>   move up=1     pages=True
3275 map <CR>       move right=1
3276 map <DELETE>   console delete
3277 map <INSERT>   console touch
3278
3279 # VIM-like
3280 copymap <UP>       k
3281 copymap <DOWN>     j
3282 copymap <LEFT>     h
3283 copymap <RIGHT>    l
3284 copymap <HOME>     gg
3285 copymap <END>      G
3286 copymap <PAGEDOWN> <C-F>
3287 copymap <PAGEUP>   <C-B>
3288
3289 map J  move down=0.5  pages=True
3290 map K  move up=0.5    pages=True
3291 copymap J <C-D>
3292 copymap K <C-U>
3293
3294 # Jumping around
3295 map H     history_go -1
3296 map L     history_go 1
3297 map ]     move_parent 1
3298 map [     move_parent -1
3299 map }     traverse
3300
3301 map gh cd ~
3302 map ge cd /etc
3303 map gu cd /usr
3304 map gd cd /dev
3305 map gl cd -r .
3306 map gL cd -r %f
3307 map go cd /opt
3308 map gv cd /var
3309 map gm cd /media
3310 map gM cd /mnt
3311 map gs cd /srv
3312 map gr cd /
3313 map gR eval fm.cd(ranger.RANGERDIR)
3314 map g/ cd /
3315 map g? cd /usr/share/doc/ranger
3316
3317 # External Programs
3318 map E  edit
3319 map du shell -p du --max-depth=1 -h --apparent-size
3320 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3321 map yp shell -d echo -n %d/%f | xsel -i
3322 map yd shell -d echo -n %d    | xsel -i
3323 map yn shell -d echo -n %f    | xsel -i
3324
3325 # Filesystem Operations
3326 map =  chmod
3327
3328 map cw console rename
3329 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3330 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3331
3332 map pp paste
3333 map po paste overwrite=True
3334 map pl paste_symlink relative=False
3335 map pL paste_symlink relative=True
3336 map phl paste_hardlink
3337 map pht paste_hardlinked_subtree
3338
3339 map dd cut
3340 map ud uncut
3341 map da cut mode=add
3342 map dr cut mode=remove
3343
3344 map yy copy
3345 map uy uncut
3346 map ya copy mode=add
3347 map yr copy mode=remove
3348
3349 # Temporary workarounds
3350 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3351 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3352 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3353 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3354 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3355 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3356 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3357 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3358
3359 # Searching
3360 map /  console search
3361 map n  search_next
3362 map N  search_next forward=False
3363 map ct search_next order=tag
3364 map cs search_next order=size
3365 map ci search_next order=mimetype
3366 map cc search_next order=ctime
3367 map cm search_next order=mtime
3368 map ca search_next order=atime
3369
3370 # Tabs
3371 map <C-n>     tab_new ~
3372 map <C-w>     tab_close
3373 map <TAB>     tab_move 1
3374 map <S-TAB>   tab_move -1
3375 map <A-Right> tab_move 1
3376 map <A-Left>  tab_move -1
3377 map gt        tab_move 1
3378 map gT        tab_move -1
3379 map gn        tab_new ~
3380 map gc        tab_close
3381 map uq        tab_restore
3382 map <a-1>     tab_open 1
3383 map <a-2>     tab_open 2
3384 map <a-3>     tab_open 3
3385 map <a-4>     tab_open 4
3386 map <a-5>     tab_open 5
3387 map <a-6>     tab_open 6
3388 map <a-7>     tab_open 7
3389 map <a-8>     tab_open 8
3390 map <a-9>     tab_open 9
3391
3392 # Sorting
3393 map or toggle_option sort_reverse
3394 map os chain set sort=size;      set sort_reverse=False
3395 map ob chain set sort=basename;  set sort_reverse=False
3396 map on chain set sort=natural;   set sort_reverse=False
3397 map om chain set sort=mtime;     set sort_reverse=False
3398 map oc chain set sort=ctime;     set sort_reverse=False
3399 map oa chain set sort=atime;     set sort_reverse=False
3400 map ot chain set sort=type;      set sort_reverse=False
3401
3402 map oS chain set sort=size;      set sort_reverse=True
3403 map oB chain set sort=basename;  set sort_reverse=True
3404 map oN chain set sort=natural;   set sort_reverse=True
3405 map oM chain set sort=mtime;     set sort_reverse=True
3406 map oC chain set sort=ctime;     set sort_reverse=True
3407 map oA chain set sort=atime;     set sort_reverse=True
3408 map oT chain set sort=type;      set sort_reverse=True
3409
3410 map dc get_cumulative_size
3411
3412 # Settings
3413 map zc    toggle_option collapse_preview
3414 map zd    toggle_option sort_directories_first
3415 map zh    toggle_option show_hidden
3416 map <C-h> toggle_option show_hidden
3417 map zi    toggle_option flushinput
3418 map zm    toggle_option mouse_enabled
3419 map zp    toggle_option preview_files
3420 map zP    toggle_option preview_directories
3421 map zs    toggle_option sort_case_insensitive
3422 map zu    toggle_option autoupdate_cumulative_size
3423 map zv    toggle_option use_preview_script
3424 map zf    console filter
3425
3426 # Bookmarks
3427 map `<any>  enter_bookmark %any
3428 map '<any>  enter_bookmark %any
3429 map m<any>  set_bookmark %any
3430 map um<any> unset_bookmark %any
3431
3432 map m<bg>   draw_bookmarks
3433 copymap m<bg>  um<bg> `<bg> '<bg>
3434
3435 # Generate all the chmod bindings with some python help:
3436 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3437 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3438 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3439 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3440 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3441
3442 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3443 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3444 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3445 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3446 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3447
3448 # ===================================================================
3449 # == Define keys for the console
3450 # ===================================================================
3451 # Note: Unmapped keys are passed directly to the console.
3452
3453 # Basic
3454 cmap <tab>   eval fm.ui.console.tab()
3455 cmap <s-tab> eval fm.ui.console.tab(-1)
3456 cmap <ESC>   eval fm.ui.console.close()
3457 cmap <CR>    eval fm.ui.console.execute()
3458 cmap <C-l>   redraw_window
3459
3460 copycmap <ESC> <C-c>
3461 copycmap <CR>  <C-j>
3462
3463 # Move around
3464 cmap <up>    eval fm.ui.console.history_move(-1)
3465 cmap <down>  eval fm.ui.console.history_move(1)
3466 cmap <left>  eval fm.ui.console.move(left=1)
3467 cmap <right> eval fm.ui.console.move(right=1)
3468 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3469 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3470
3471 # Line Editing
3472 cmap <backspace>  eval fm.ui.console.delete(-1)
3473 cmap <delete>     eval fm.ui.console.delete(0)
3474 cmap <C-w>        eval fm.ui.console.delete_word()
3475 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3476 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3477 cmap <C-y>        eval fm.ui.console.paste()
3478
3479 # And of course the emacs way
3480 copycmap <up>        <C-p>
3481 copycmap <down>      <C-n>
3482 copycmap <left>      <C-b>
3483 copycmap <right>     <C-f>
3484 copycmap <home>      <C-a>
3485 copycmap <end>       <C-e>
3486 copycmap <delete>    <C-d>
3487 copycmap <backspace> <C-h>
3488
3489 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3490 # and <backspace2> (code 127).  To be sure, use both.
3491 copycmap <backspace> <backspace2>
3492
3493 # This special expression allows typing in numerals:
3494 cmap <allow_quantifiers> false
3495
3496 # ===================================================================
3497 # == Pager Keybindings
3498 # ===================================================================
3499
3500 # Movement
3501 pmap  <down>      pager_move  down=1
3502 pmap  <up>        pager_move  up=1
3503 pmap  <left>      pager_move  left=4
3504 pmap  <right>     pager_move  right=4
3505 pmap  <home>      pager_move  to=0
3506 pmap  <end>       pager_move  to=-1
3507 pmap  <pagedown>  pager_move  down=1.0  pages=True
3508 pmap  <pageup>    pager_move  up=1.0    pages=True
3509 pmap  <C-d>       pager_move  down=0.5  pages=True
3510 pmap  <C-u>       pager_move  up=0.5    pages=True
3511
3512 copypmap <UP>       k  <C-p>
3513 copypmap <DOWN>     j  <C-n> <CR>
3514 copypmap <LEFT>     h
3515 copypmap <RIGHT>    l
3516 copypmap <HOME>     g
3517 copypmap <END>      G
3518 copypmap <C-d>      d
3519 copypmap <C-u>      u
3520 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3521 copypmap <PAGEUP>   p  b  <C-B>
3522
3523 # Basic
3524 pmap     <ESC> pager_close
3525 copypmap <ESC> q Q i <F3>
3526 pmap E      edit_file
3527
3528 # ===================================================================
3529 # == Taskview Keybindings
3530 # ===================================================================
3531
3532 # Movement
3533 tmap <up>        taskview_move up=1
3534 tmap <down>      taskview_move down=1
3535 tmap <home>      taskview_move to=0
3536 tmap <end>       taskview_move to=-1
3537 tmap <pagedown>  taskview_move down=1.0  pages=True
3538 tmap <pageup>    taskview_move up=1.0    pages=True
3539 tmap <C-d>       taskview_move down=0.5  pages=True
3540 tmap <C-u>       taskview_move up=0.5    pages=True
3541
3542 copytmap <UP>       k  <C-p>
3543 copytmap <DOWN>     j  <C-n> <CR>
3544 copytmap <HOME>     g
3545 copytmap <END>      G
3546 copytmap <C-u>      u
3547 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3548 copytmap <PAGEUP>   p  b  <C-B>
3549
3550 # Changing priority and deleting tasks
3551 tmap J          eval -q fm.ui.taskview.task_move(-1)
3552 tmap K          eval -q fm.ui.taskview.task_move(0)
3553 tmap dd         eval -q fm.ui.taskview.task_remove()
3554 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3555 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3556 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3557
3558 # Basic
3559 tmap <ESC> taskview_close
3560 copytmap <ESC> q Q w <C-c>
3561 #+end_src
3562
3563 *** scope.sh
3564 :PROPERTIES:
3565 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3566 :END:
3567
3568 #+begin_src sh :tangle no
3569 # ranger supports enhanced previews.  If the option "use_preview_script"
3570 # is set to True and this file exists, this script will be called and its
3571 # output is displayed in ranger.  ANSI color codes are supported.
3572
3573 # NOTES: This script is considered a configuration file.  If you upgrade
3574 # ranger, it will be left untouched. (You must update it yourself.)
3575 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3576
3577 # Meanings of exit codes:
3578 # code | meaning    | action of ranger
3579 # -----+------------+-------------------------------------------
3580 # 0    | success    | success. display stdout as preview
3581 # 1    | no preview | failure. display no preview at all
3582 # 2    | plain text | display the plain content of the file
3583 # 3    | fix width  | success. Don't reload when width changes
3584 # 4    | fix height | success. Don't reload when height changes
3585 # 5    | fix both   | success. Don't ever reload
3586
3587 # Meaningful aliases for arguments:
3588 path="$1"    # Full path of the selected file
3589 width="$2"   # Width of the preview pane (number of fitting characters)
3590 height="$3"  # Height of the preview pane (number of fitting characters)
3591
3592 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3593
3594 # Find out something about the file:
3595 mimetype=$(file --mime-type -Lb "$path")
3596 extension=${path##*.}
3597
3598 # Functions:
3599 # runs a command and saves its output into $output.  Useful if you need
3600 # the return value AND want to use the output in a pipe
3601 try() { output=$(eval '"$@"'); }
3602
3603 # writes the output of the previouosly used "try" command
3604 dump() { echo "$output"; }
3605
3606 # a common post-processing function used after most commands
3607 trim() { head -n "$maxln"; }
3608
3609 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3610 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3611
3612 case "$extension" in
3613     # Archive extensions:
3614     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3615     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3616         try als "$path" && { dump | trim; exit 0; }
3617         try acat "$path" && { dump | trim; exit 3; }
3618         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3619         exit 1;;
3620     rar)
3621         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3622     # PDF documents:
3623     pdf)
3624         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3625             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3626     # BitTorrent Files
3627     torrent)
3628         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3629     # HTML Pages:
3630     htm|html|xhtml)
3631         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3632         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3633         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3634         ;; # fall back to highlight/cat if the text browsers fail
3635 esac
3636
3637 case "$mimetype" in
3638     # Syntax highlight for text files:
3639     text/* | */xml)
3640         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3641     # Ascii-previews of images:
3642     image/*)
3643         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3644     # Display information about media files:
3645     video/* | audio/*)
3646         exiftool "$path" && exit 5
3647         # Use sed to remove spaces so the output fits into the narrow window
3648         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3649 esac
3650
3651 exit 1
3652 #+end_src
3653
3654 ** redshift
3655 :PROPERTIES:
3656 :header-args+: :tangle ~/.config/redshift.conf :comments none
3657 :END:
3658
3659 #+begin_src conf
3660 ; Global settings for redshift
3661 [redshift]
3662 ; Set the day and night screen temperatures (Neutral is 6500K)
3663 ;temp-day=5700
3664 ;temp-night=3500
3665
3666 ;temp-day=6500
3667 temp-day=6200
3668 ;temp-night=4800
3669 ;temp-night=5000
3670 ;temp-night=4500
3671 temp-night=4000
3672
3673 ; Enable/Disable a smooth transition between day and night
3674 ; 0 will cause a direct change from day to night screen temperature.
3675 ; 1 will gradually increase or decrease the screen temperature.
3676 transition=1
3677
3678 ; Set the screen brightness. Default is 1.0.
3679 ;brightness=0.9
3680 ; It is also possible to use different settings for day and night
3681 ; since version 1.8.
3682 ;brightness-day=0.7
3683 ;brightness-night=0.4
3684 ; Set the screen gamma (for all colors, or each color channel
3685 ; individually)
3686 ;gamma=0.8
3687 ;gamma=1.0
3688 ;gamma=0.8:0.7:0.8
3689 ; This can also be set individually for day and night since
3690 ; version 1.10.
3691 ;gamma-day=0.8:0.7:0.8
3692 ;gamma-night=0.6
3693
3694 ; Set the location-provider: 'geoclue2' or 'manual'
3695 ; type 'redshift -l list' to see possible values.
3696 ; The location provider settings are in a different section.
3697 ;location-provider=manual
3698 location-provider=geoclue2
3699
3700 ; Set the adjustment-method: 'randr', 'vidmode'
3701 ; type 'redshift -m list' to see all possible values.
3702 ; 'randr' is the preferred method, 'vidmode' is an older API.
3703 ; but works in some cases when 'randr' does not.
3704 ; The adjustment method settings are in a different section.
3705 adjustment-method=randr
3706
3707 ; Configuration of the location-provider:
3708 ; type 'redshift -l PROVIDER:help' to see the settings.
3709 ; ex: 'redshift -l manual:help'
3710 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3711 ; are negative numbers.
3712 ;[manual]
3713 ;lat=48.1
3714 ;lon=11.6
3715
3716 ; Configuration of the adjustment-method
3717 ; type 'redshift -m METHOD:help' to see the settings.
3718 ; ex: 'redshift -m randr:help'
3719 ; In this example, randr is configured to adjust screen 1.
3720 ; Note that the numbering starts from 0, so this is actually the
3721 ; second screen. If this option is not specified, Redshift will try
3722 ; to adjust _all_ screens.
3723 ;[randr]
3724 ;screen=1
3725 #+end_src
3726
3727 ** rofi
3728 :PROPERTIES:
3729 :header-args+: :tangle ~/.config/rofi/config
3730 :END:
3731
3732 #+begin_src conf
3733 ! rofi.font: Ubuntu Mono 13
3734 ! rofi.font: Inconsolata 16
3735 ! rofi.font: Iosevka 13
3736 ! rofi.font: Source Code Pro 11
3737 rofi.font: Source Code Pro 10.5
3738 rofi.modi: run,window
3739 ! rofi.width: 640
3740 rofi.width: 600
3741 !rofi.location: 2
3742 !rofi.yoffset: 200
3743 rofi.monitor: -1
3744 !rofi.lines: 10
3745
3746 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3747 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3748 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3749
3750 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3751 #+end_src
3752
3753 ** rofi-pass
3754 :PROPERTIES:
3755 :header-args+: :tangle ~/.config/rofi-pass/config
3756 :END:
3757
3758 #+begin_src conf
3759 # permanently set alternative root dir
3760 # root=/path/to/root
3761
3762 # rofi command. Make sure to have "$@" as last argument
3763 _rofi () {
3764     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3765     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3766 }
3767
3768 # xdotool needs the keyboard layout to be set using setxkbmap
3769 # You can do this in your autostart scripts (e.g. xinitrc)
3770
3771 # If for some reason, you cannot do this, you can set the command here.
3772 # and set fix_layout to true
3773 fix_layout=false
3774
3775 layout_cmd () {
3776   setxkbmap us
3777 }
3778
3779 # fields to be used
3780 URL_field='url'
3781 USERNAME_field='user'
3782 AUTOTYPE_field='autotype'
3783
3784 # delay to be used for :delay keyword
3785 delay=2
3786
3787 ## Programs to be used
3788 # Editor
3789 EDITOR='gvim -f'
3790
3791 # Browser
3792 BROWSER='chromium'
3793
3794 ## Misc settings
3795
3796 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3797 auto_enter='false'
3798 notify='false'
3799 default_autotype='user :tab pass'
3800
3801 # color of the help messages
3802 # leave empty for autodetection
3803 help_color="#4872FF"
3804
3805 # Clipboard settings
3806 # Possible options: primary, clipboard, both
3807 clip=primary
3808
3809 # Options for generating new password entries
3810 # default_user is also used for password files that have no user field.
3811 default_user=aminb
3812 default_user2=aminban
3813 password_length=30
3814
3815 # Custom Keybindings
3816 #autotype="Alt+1"
3817 autotype="Alt+m"
3818 type_user="Alt+2"
3819 type_pass="Alt+3"
3820 open_url="Alt+4"
3821 copy_name="Alt+u"
3822 copy_url="Alt+l"
3823 copy_pass="Alt+p"
3824 show="Alt+o"
3825 copy_entry="Alt+2"
3826 type_entry="Alt+1"
3827 copy_menu="Alt+c"
3828 action_menu="Alt+a"
3829 type_menu="Alt+t"
3830 help="Alt+h"
3831 switch="Alt+x"
3832 insert_pass="Alt+n"
3833 #+end_src
3834
3835 ** sway
3836
3837 *** main
3838 :PROPERTIES:
3839 :header-args+: :tangle ~/.config/sway/config
3840 :END:
3841
3842 #+begin_src conf
3843 ### Variables
3844 # super
3845 set $mod Mod4
3846 # alt
3847 set $mod2 Mod1
3848 set $left h
3849 set $down j
3850 set $up k
3851 set $right l
3852 set $term urxvt
3853 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3854
3855 ### Output configuration
3856 #
3857 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3858 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3859 #
3860 # Example configuration:
3861 #
3862 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
3863 #
3864 # You can get the names of your outputs by running: swaymsg -t get_outputs
3865
3866 ### Idle configuration
3867
3868 exec swayidle \
3869    timeout 120  '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
3870         resume  '[ -f ~/.nosleep ] || swaymsg "output * dpms on"'  \
3871
3872
3873 ### Key bindings
3874 #
3875 # Basics:
3876 #
3877     # start a terminal
3878     bindsym $mod+Return exec $term -name floating
3879     bindsym $mod+Shift+Return exec $term
3880     for_window [class="URxvt" instance="floating"] floating enable
3881
3882     # kill focused window
3883     bindsym $mod+Shift+q kill
3884
3885     # start your launcher
3886     bindsym $mod+d exec $menu
3887
3888     # password manager
3889     bindsym $mod2+space exec rofi-pass
3890
3891     # Drag floating windows by holding down $mod and left mouse button.
3892     # Resize them with right mouse button + $mod.
3893     # Despite the name, also works for non-floating windows.
3894     # Change normal to inverse to use left mouse button for resizing and right
3895     # mouse button for dragging.
3896     floating_modifier $mod normal
3897
3898     # reload the configuration file
3899     bindsym $mod+Shift+c reload
3900
3901     # exit sway (logs you out of your wayland session)
3902     # bindsym $mod+Shift+e exit
3903
3904     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
3905     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
3906     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
3907
3908     bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3909     bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3910     bindsym XF86AudioMute exec pamixer --toggle-mute
3911     bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3912
3913     bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
3914
3915     # original sway workspace switch and window move
3916     bindsym $mod+bracketleft workspace prev
3917     bindsym $mod+bracketright workspace next
3918     bindsym $mod+braceleft move container to workspace prev
3919     bindsym $mod+braceright move container to workspace next
3920
3921     # bspwm-esque workspace switch and window move
3922     bindsym $mod2+bracketleft exec sway-ws-util switch prev
3923     bindsym $mod2+bracketright exec sway-ws-util switch next
3924     bindsym $mod2+braceleft exec sway-ws-util move prev follow
3925     bindsym $mod2+braceright exec sway-ws-util move next follow
3926 #
3927 # Moving around:
3928 #
3929     # Move your focus around
3930     bindsym $mod+$left focus left
3931     bindsym $mod+$down focus down
3932     bindsym $mod+$up focus up
3933     bindsym $mod+$right focus right
3934     # or use $mod+[up|down|left|right]
3935     bindsym $mod+Left focus left
3936     bindsym $mod+Down focus down
3937     bindsym $mod+Up focus up
3938     bindsym $mod+Right focus right
3939
3940     # _move_ the focused window with the same, but add Shift
3941     bindsym $mod+Shift+$left move left
3942     bindsym $mod+Shift+$down move down
3943     bindsym $mod+Shift+$up move up
3944     bindsym $mod+Shift+$right move right
3945     # ditto, with arrow keys
3946     bindsym $mod+Shift+Left move left
3947     bindsym $mod+Shift+Down move down
3948     bindsym $mod+Shift+Up move up
3949     bindsym $mod+Shift+Right move right
3950 #
3951 # Workspaces:
3952 #
3953     # switch to workspace
3954     bindsym $mod+1 workspace 1
3955     bindsym $mod+2 workspace 2
3956     bindsym $mod+3 workspace 3
3957     bindsym $mod+4 workspace 4
3958     bindsym $mod+5 workspace 5
3959     bindsym $mod+6 workspace 6
3960     bindsym $mod+7 workspace 7
3961     bindsym $mod+8 workspace 8
3962     bindsym $mod+9 workspace 9
3963     bindsym $mod+0 workspace 10
3964     # move focused container to workspace
3965     bindsym $mod+Shift+1 move container to workspace 1
3966     bindsym $mod+Shift+2 move container to workspace 2
3967     bindsym $mod+Shift+3 move container to workspace 3
3968     bindsym $mod+Shift+4 move container to workspace 4
3969     bindsym $mod+Shift+5 move container to workspace 5
3970     bindsym $mod+Shift+6 move container to workspace 6
3971     bindsym $mod+Shift+7 move container to workspace 7
3972     bindsym $mod+Shift+8 move container to workspace 8
3973     bindsym $mod+Shift+9 move container to workspace 9
3974     bindsym $mod+Shift+0 move container to workspace 10
3975     # Note: workspaces can have any name you want, not just numbers.
3976     # We just use 1-10 as the default.
3977 #
3978 # Layout stuff:
3979 #
3980     # You can "split" the current object of your focus with
3981     # $mod+b or $mod+v, for horizontal and vertical splits
3982     # respectively.
3983     bindsym $mod+b splith
3984     bindsym $mod+v splitv
3985
3986     # Switch the current container between different layout styles
3987     bindsym $mod+s layout stacking
3988     bindsym $mod+w layout tabbed
3989     bindsym $mod+e layout toggle split
3990
3991     # Make the current focus fullscreen
3992     bindsym $mod+f fullscreen
3993
3994     # Toggle the current focus between tiling and floating mode
3995     bindsym $mod+Shift+space floating toggle
3996
3997     # Swap focus between the tiling area and the floating area
3998     bindsym $mod+space focus mode_toggle
3999
4000     # move focus to the parent container
4001     bindsym $mod+a focus parent
4002 #
4003 # Scratchpad:
4004 #
4005     # Sway has a "scratchpad", which is a bag of holding for windows.
4006     # You can send windows there and get them back later.
4007
4008     # Move the currently focused window to the scratchpad
4009     bindsym $mod+Shift+minus move scratchpad
4010
4011     # Show the next scratchpad window or hide the focused scratchpad window.
4012     # If there are multiple scratchpad windows, this command cycles through them.
4013     bindsym $mod+minus scratchpad show
4014 #
4015 # Resizing containers:
4016 #
4017 mode "resize" {
4018     # left will shrink the containers width
4019     # right will grow the containers width
4020     # up will shrink the containers height
4021     # down will grow the containers height
4022     bindsym $left resize shrink width 10px
4023     bindsym $down resize grow height 10px
4024     bindsym $up resize shrink height 10px
4025     bindsym $right resize grow width 10px
4026
4027     # ditto, with arrow keys
4028     bindsym Left resize shrink width 10px
4029     bindsym Down resize grow height 10px
4030     bindsym Up resize shrink height 10px
4031     bindsym Right resize grow width 10px
4032
4033     # return to default mode
4034     bindsym Return mode "default"
4035     bindsym Escape mode "default"
4036 }
4037 bindsym $mod+Shift+r mode "resize"
4038
4039 #
4040 # Power button
4041 #
4042
4043 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
4044 mode "$mode_system" {
4045     bindsym l       exec swaylock,              mode "default"
4046     bindsym e       exec swaymsg exit,          mode "default"
4047     bindsym s       exec systemctl suspend,     mode "default"
4048     bindsym h       exec systemctl hibernate,   mode "default"
4049     bindsym r       exec systemctl reboot,      mode "default"
4050     bindsym Shift+s exec systemctl poweroff -i, mode "default"
4051
4052     # back to normal: Enter, Escape, or q
4053     bindsym Return mode "default"
4054     bindsym Escape mode "default"
4055     bindsym q      mode "default"
4056 }
4057 # bindsym XF86PowerOff mode "$mode_system"
4058 bindsym $mod+Shift+e mode "$mode_system"
4059
4060 #
4061 # Presentation mode
4062 #
4063
4064 bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
4065
4066 #
4067 # Notifications
4068 #
4069
4070 bindsym $mod+Shift+n mode notifications
4071 mode notifications {
4072     bindsym Return  exec makoctl invoke; exec makoctl dismiss; mode default
4073     bindsym d       exec makoctl dismiss; mode default
4074     bindsym Shift+d exec makoctl dismiss -a; mode default
4075
4076     bindsym Escape mode default
4077     bindsym q      mode default
4078 }
4079
4080 #
4081 # Screenshotting
4082 #
4083
4084 bindsym $mod+Shift+s mode screenshot
4085 mode screenshot {
4086     bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4087     bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4088
4089     bindsym Escape mode default
4090     bindsym q      mode default
4091 }
4092
4093 #
4094 # Status Bar:
4095 #
4096 # Read `man 5 sway-bar` for more information about this section.
4097 bar {
4098     position bottom
4099     colors {
4100         statusline #ffffff
4101         background #323232
4102         inactive_workspace #32323200 #32323200 #5c5c5c
4103     }
4104     status_command i3status | my-i3status.py
4105 }
4106
4107 # font pango: benis uushi 9
4108 # font pango: Ubuntu Mono 11
4109 # font pango: Inconsolata 11
4110 font pango: DejaVu Sans Mono 9
4111 # font pango: Liberation Mono 9
4112
4113 exec xrdb .Xresources
4114 # exec pgrep -x "systemd-inhibit" || \
4115 #      systemd-inhibit --what=handle-power-key --who=aminb \
4116 #      --why="Handle power button in sway" sleep infinity
4117 exec mako 2>&1 >/tmp/mako.log
4118 exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4119
4120 include /etc/sway/config.d/*
4121 include ~/.config/sway/`hostname`
4122
4123 exec systemd-notify --ready || true
4124
4125 #+end_src
4126
4127 *** langa
4128 :PROPERTIES:
4129 :header-args+: :tangle ~/.config/sway/langa
4130 :END:
4131
4132 #+begin_src conf
4133 input "2:7:SynPS/2_Synaptics_TouchPad" {
4134     events disabled
4135     dwt enabled
4136     tap enabled
4137     natural_scroll enabled
4138     click_method clickfinger
4139 }
4140
4141 input "1:1:AT_Translated_Set_2_keyboard" {
4142     repeat_delay 200
4143     repeat_rate 45
4144     xkb_layout us_ab,ir
4145     xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4146 }
4147 #+end_src
4148
4149 *** shemshak
4150 :PROPERTIES:
4151 :header-args+: :tangle ~/.config/sway/shemshak
4152 :END:
4153
4154 #+begin_src conf
4155 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4156     dwt enabled
4157     tap enabled
4158     natural_scroll enabled
4159     middle_emulation enabled
4160     click_method clickfinger
4161 }
4162
4163 input "1:1:AT_Translated_Set_2_keyboard" {
4164     repeat_delay 200
4165     repeat_rate 45
4166     xkb_layout us,ir
4167     xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4168 }
4169 #+end_src
4170 ** swaylock
4171 :PROPERTIES:
4172 :header-args+: :tangle ~/.config/swaylock/config
4173 :END:
4174
4175 #+begin_src conf
4176 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4177 scaling=fill
4178 #+end_src
4179
4180 ** TLP
4181
4182 *** langa
4183
4184 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4185 # ------------------------------------------------------------------------------
4186 # tlp - Parameters for power saving
4187 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4188
4189 # Hint: some features are disabled by default, remove the leading # to enable
4190 # them.
4191
4192 # Set to 0 to disable, 1 to enable TLP.
4193 TLP_ENABLE=1
4194
4195 # Operation mode when no power supply can be detected: AC, BAT.
4196 # Concerns some desktop and embedded hardware only.
4197 TLP_DEFAULT_MODE=AC
4198
4199 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4200 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4201 TLP_PERSISTENT_DEFAULT=0
4202
4203 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4204 # Non-zero value enables, zero disables laptop mode.
4205 DISK_IDLE_SECS_ON_AC=0
4206 DISK_IDLE_SECS_ON_BAT=2
4207
4208 # Dirty page values (timeouts in secs).
4209 MAX_LOST_WORK_SECS_ON_AC=15
4210 MAX_LOST_WORK_SECS_ON_BAT=60
4211
4212 # Hint: CPU parameters below are disabled by default, remove the leading #
4213 # to enable them, otherwise kernel default values are used.
4214
4215 # Select a CPU frequency scaling governor.
4216 # Intel Core i processor with intel_pstate driver:
4217 #   powersave(*), performance.
4218 # Older hardware with acpi-cpufreq driver:
4219 #   ondemand(*), powersave, performance, conservative, schedutil.
4220 # (*) is recommended.
4221 # Hint: use tlp-stat -p to show the active driver and available governors.
4222 # Important:
4223 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
4224 #   efficient for *almost all* workloads and therefore kernel and most
4225 #   distributions have chosen them as defaults. If you still want to change,
4226 #   you should know what you're doing! You *must* disable your distribution's
4227 #   governor settings or conflicts will occur.
4228 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4229 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4230
4231 # Set the min/max frequency available for the scaling governor.
4232 # Possible values strongly depend on your CPU. For available frequencies see
4233 # the output of tlp-stat -p.
4234 #CPU_SCALING_MIN_FREQ_ON_AC=0
4235 #CPU_SCALING_MAX_FREQ_ON_AC=0
4236 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4237 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4238
4239 # Set energy performance hints (HWP) for Intel P-state governor:
4240 #   performance, balance_performance, default, balance_power, power
4241 # Values are given in order of increasing power saving.
4242 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4243 CPU_HWP_ON_AC=balance_performance
4244 CPU_HWP_ON_BAT=balance_power
4245
4246 # Set Intel P-state performance: 0..100 (%).
4247 # Limit the max/min P-state to control the power dissipation of the CPU.
4248 # Values are stated as a percentage of the available performance.
4249 # Requires an Intel Core i processor with intel_pstate driver.
4250 #CPU_MIN_PERF_ON_AC=0
4251 #CPU_MAX_PERF_ON_AC=100
4252 #CPU_MIN_PERF_ON_BAT=0
4253 #CPU_MAX_PERF_ON_BAT=30
4254
4255 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4256 # Requires an Intel Core i processor.
4257 # Important:
4258 # - This may conflict with your distribution's governor settings
4259 # - A value of 1 does *not* activate boosting, it just allows it
4260 #CPU_BOOST_ON_AC=1
4261 #CPU_BOOST_ON_BAT=0
4262
4263 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4264 #   0=disable, 1=enable.
4265 SCHED_POWERSAVE_ON_AC=0
4266 SCHED_POWERSAVE_ON_BAT=1
4267
4268 # Kernel NMI Watchdog:
4269 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4270 NMI_WATCHDOG=0
4271
4272 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4273 # Frequency voltage pairs are written to:
4274 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4275 # CAUTION: only use this, if you thoroughly understand what you are doing!
4276 #PHC_CONTROLS="F:V F:V F:V F:V"
4277
4278 # Set CPU performance versus energy savings policy:
4279 #   performance, balance-performance, default, balance-power, power.
4280 # Values are given in order of increasing power saving.
4281 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4282 ENERGY_PERF_POLICY_ON_AC=performance
4283 ENERGY_PERF_POLICY_ON_BAT=balance-power
4284
4285 # Disk devices; separate multiple devices with spaces (default: sda).
4286 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4287 DISK_DEVICES="sda sdb"
4288
4289 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4290 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4291 # Separate values for multiple disks with spaces. Use the special value 'keep'
4292 # to keep the hardware default for the particular disk.
4293 DISK_APM_LEVEL_ON_AC="254 254"
4294 DISK_APM_LEVEL_ON_BAT="128 128"
4295
4296 # Hard disk spin down timeout:
4297 #   0:        spin down disabled
4298 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4299 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4300 # See 'man hdparm' for details.
4301 # Separate values for multiple disks with spaces. Use the special value 'keep'
4302 # to keep the hardware default for the particular disk.
4303 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4304 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4305
4306 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4307 # Separate values for multiple disks with spaces. Use the special value 'keep'
4308 # to keep the kernel default scheduler for the particular disk.
4309 #DISK_IOSCHED="cfq cfq"
4310
4311 # AHCI link power management (ALPM) for disk devices:
4312 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4313 # (*) Kernel >= 4.15 required, then recommended.
4314 # Multiple values separated with spaces are tried sequentially until success.
4315 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4316 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4317
4318 # Exclude host devices from AHCI link power management.
4319 # Separate multiple hosts with spaces.
4320 #SATA_LINKPWR_BLACKLIST="host1"
4321
4322 # Runtime Power Management for AHCI host and disks devices:
4323 #   on=disable, auto=enable.
4324 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4325 #AHCI_RUNTIME_PM_ON_AC=on
4326 #AHCI_RUNTIME_PM_ON_BAT=on
4327
4328 # Seconds of inactivity before disk is suspended.
4329 AHCI_RUNTIME_PM_TIMEOUT=15
4330
4331 # PCI Express Active State Power Management (PCIe ASPM):
4332 #   default, performance, powersave.
4333 PCIE_ASPM_ON_AC=performance
4334 PCIE_ASPM_ON_BAT=powersave
4335
4336 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4337 # auto = mid on BAT, high on AC; default = use hardware defaults.
4338 RADEON_POWER_PROFILE_ON_AC=high
4339 RADEON_POWER_PROFILE_ON_BAT=low
4340
4341 # Radeon dynamic power management method (DPM): battery, performance.
4342 RADEON_DPM_STATE_ON_AC=performance
4343 RADEON_DPM_STATE_ON_BAT=battery
4344
4345 # Radeon DPM performance level: auto, low, high; auto is recommended.
4346 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4347 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4348
4349 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4350 WIFI_PWR_ON_AC=off
4351 WIFI_PWR_ON_BAT=on
4352
4353 # Disable wake on LAN: Y/N.
4354 WOL_DISABLE=Y
4355
4356 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4357 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4358 SOUND_POWER_SAVE_ON_AC=0
4359 SOUND_POWER_SAVE_ON_BAT=0
4360
4361 # Disable controller too (HDA only): Y/N.
4362 SOUND_POWER_SAVE_CONTROLLER=N
4363
4364 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4365 # Drive can be powered on again by releasing (and reinserting) the eject lever
4366 # or by pressing the disc eject button on newer models.
4367 # Note: an UltraBay/MediaBay hard disk is never powered off.
4368 BAY_POWEROFF_ON_AC=0
4369 BAY_POWEROFF_ON_BAT=0
4370 # Optical drive device to power off (default sr0).
4371 BAY_DEVICE="sr0"
4372
4373 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4374 RUNTIME_PM_ON_AC=on
4375 RUNTIME_PM_ON_BAT=auto
4376
4377 # Exclude PCI(e) device adresses the following list from Runtime PM
4378 # (separate with spaces). Use lspci to get the adresses (1st column).
4379 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4380
4381 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4382 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4383 # prevents accidential power-on of dGPU in hybrid graphics setups.
4384 # Use "" to disable the feature completely.
4385 # Separate multiple drivers with spaces.
4386 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4387
4388 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4389 USB_AUTOSUSPEND=1
4390
4391 # Exclude listed devices from USB autosuspend (separate with spaces).
4392 # Use lsusb to get the ids.
4393 # Note: input devices (usbhid) are excluded automatically
4394 #USB_BLACKLIST="1111:2222 3333:4444"
4395
4396 # Bluetooth devices are excluded from USB autosuspend:
4397 #   0=do not exclude, 1=exclude.
4398 USB_BLACKLIST_BTUSB=0
4399
4400 # Phone devices are excluded from USB autosuspend:
4401 #   0=do not exclude, 1=exclude (enable charging).
4402 USB_BLACKLIST_PHONE=0
4403
4404 # Printers are excluded from USB autosuspend:
4405 #   0=do not exclude, 1=exclude.
4406 USB_BLACKLIST_PRINTER=1
4407
4408 # WWAN devices are excluded from USB autosuspend:
4409 #   0=do not exclude, 1=exclude.
4410 USB_BLACKLIST_WWAN=1
4411
4412 # Include listed devices into USB autosuspend even if already excluded
4413 # by the blacklists above (separate with spaces).
4414 # Use lsusb to get the ids.
4415 #USB_WHITELIST="1111:2222 3333:4444"
4416
4417 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4418 # (workaround for USB devices that cause shutdown problems).
4419 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4420
4421 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4422 # on system startup: 0=disable, 1=enable.
4423 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4424 #   are ignored when this is enabled!
4425 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4426 RESTORE_DEVICE_STATE_ON_STARTUP=0
4427
4428 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4429 # Separate multiple devices with spaces.
4430 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4431 DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
4432
4433 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4434 # Separate multiple devices with spaces.
4435 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4436
4437 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4438 # (workaround for devices that are blocking shutdown).
4439 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4440
4441 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4442 # (to prevent other operating systems from missing radios).
4443 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4444
4445 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4446 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4447
4448 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4449 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4450
4451 # Radio devices to disable on battery when not in use (not connected):
4452 #   bluetooth, wifi, wwan.
4453 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4454
4455 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4456 # required). Charging starts when the remaining capacity falls below the
4457 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4458 # Main / Internal battery (values in %)
4459 #START_CHARGE_THRESH_BAT0=75
4460 #STOP_CHARGE_THRESH_BAT0=80
4461 # Ultrabay / Slice / Replaceable battery (values in %)
4462 #START_CHARGE_THRESH_BAT1=75
4463 #STOP_CHARGE_THRESH_BAT1=80
4464
4465 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4466 #RESTORE_THRESHOLDS_ON_BAT=1
4467
4468 # ------------------------------------------------------------------------------
4469 # tlp-rdw - Parameters for the radio device wizard
4470 # Possible devices: bluetooth, wifi, wwan.
4471
4472 # Hints:
4473 # - Parameters are disabled by default, remove the leading # to enable them
4474 # - Separate multiple radio devices with spaces
4475
4476 # Radio devices to disable on connect.
4477 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4478 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4479 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4480
4481 # Radio devices to enable on disconnect.
4482 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4483 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4484 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4485
4486 # Radio devices to enable/disable when docked.
4487 #DEVICES_TO_ENABLE_ON_DOCK=""
4488 #DEVICES_TO_DISABLE_ON_DOCK=""
4489
4490 # Radio devices to enable/disable when undocked.
4491 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4492 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4493 #+end_src
4494
4495 *** shemshak
4496
4497 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
4498 # ------------------------------------------------------------------------------
4499 # tlp - Parameters for power saving
4500 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4501
4502 # Hint: some features are disabled by default, remove the leading # to enable
4503 # them.
4504
4505 # Set to 0 to disable, 1 to enable TLP.
4506 TLP_ENABLE=1
4507
4508 # Operation mode when no power supply can be detected: AC, BAT.
4509 # Concerns some desktop and embedded hardware only.
4510 TLP_DEFAULT_MODE=AC
4511
4512 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4513 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4514 TLP_PERSISTENT_DEFAULT=0
4515
4516 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4517 # Non-zero value enables, zero disables laptop mode.
4518 DISK_IDLE_SECS_ON_AC=0
4519 DISK_IDLE_SECS_ON_BAT=2
4520
4521 # Dirty page values (timeouts in secs).
4522 MAX_LOST_WORK_SECS_ON_AC=15
4523 MAX_LOST_WORK_SECS_ON_BAT=60
4524
4525 # Hint: CPU parameters below are disabled by default, remove the leading #
4526 # to enable them, otherwise kernel default values are used.
4527
4528 # Select a CPU frequency scaling governor.
4529 # Intel Core i processor with intel_pstate driver:
4530 #   powersave(*), performance.
4531 # Older hardware with acpi-cpufreq driver:
4532 #   ondemand(*), powersave, performance, conservative, schedutil.
4533 # (*) is recommended.
4534 # Hint: use tlp-stat -p to show the active driver and available governors.
4535 # Important:
4536 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
4537 #   efficient for *almost all* workloads and therefore kernel and most
4538 #   distributions have chosen them as defaults. If you still want to change,
4539 #   you should know what you're doing! You *must* disable your distribution's
4540 #   governor settings or conflicts will occur.
4541 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4542 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4543
4544 # Set the min/max frequency available for the scaling governor.
4545 # Possible values strongly depend on your CPU. For available frequencies see
4546 # the output of tlp-stat -p.
4547 #CPU_SCALING_MIN_FREQ_ON_AC=0
4548 #CPU_SCALING_MAX_FREQ_ON_AC=0
4549 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4550 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4551
4552 # Set energy performance hints (HWP) for Intel P-state governor:
4553 #   performance, balance_performance, default, balance_power, power
4554 # Values are given in order of increasing power saving.
4555 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4556 CPU_HWP_ON_AC=balance_performance
4557 CPU_HWP_ON_BAT=balance_power
4558
4559 # Set Intel P-state performance: 0..100 (%).
4560 # Limit the max/min P-state to control the power dissipation of the CPU.
4561 # Values are stated as a percentage of the available performance.
4562 # Requires an Intel Core i processor with intel_pstate driver.
4563 #CPU_MIN_PERF_ON_AC=0
4564 #CPU_MAX_PERF_ON_AC=100
4565 #CPU_MIN_PERF_ON_BAT=0
4566 #CPU_MAX_PERF_ON_BAT=30
4567
4568 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4569 # Requires an Intel Core i processor.
4570 # Important:
4571 # - This may conflict with your distribution's governor settings
4572 # - A value of 1 does *not* activate boosting, it just allows it
4573 #CPU_BOOST_ON_AC=1
4574 #CPU_BOOST_ON_BAT=0
4575
4576 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4577 #   0=disable, 1=enable.
4578 SCHED_POWERSAVE_ON_AC=0
4579 SCHED_POWERSAVE_ON_BAT=1
4580
4581 # Kernel NMI Watchdog:
4582 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4583 NMI_WATCHDOG=0
4584
4585 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4586 # Frequency voltage pairs are written to:
4587 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4588 # CAUTION: only use this, if you thoroughly understand what you are doing!
4589 #PHC_CONTROLS="F:V F:V F:V F:V"
4590
4591 # Set CPU performance versus energy savings policy:
4592 #   performance, balance-performance, default, balance-power, power.
4593 # Values are given in order of increasing power saving.
4594 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4595 ENERGY_PERF_POLICY_ON_AC=performance
4596 ENERGY_PERF_POLICY_ON_BAT=balance-power
4597
4598 # Disk devices; separate multiple devices with spaces (default: sda).
4599 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4600 DISK_DEVICES="sda sdb"
4601
4602 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4603 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4604 # Separate values for multiple disks with spaces. Use the special value 'keep'
4605 # to keep the hardware default for the particular disk.
4606 DISK_APM_LEVEL_ON_AC="254 254"
4607 DISK_APM_LEVEL_ON_BAT="128 128"
4608
4609 # Hard disk spin down timeout:
4610 #   0:        spin down disabled
4611 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4612 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4613 # See 'man hdparm' for details.
4614 # Separate values for multiple disks with spaces. Use the special value 'keep'
4615 # to keep the hardware default for the particular disk.
4616 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4617 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4618
4619 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4620 # Separate values for multiple disks with spaces. Use the special value 'keep'
4621 # to keep the kernel default scheduler for the particular disk.
4622 #DISK_IOSCHED="cfq cfq"
4623
4624 # AHCI link power management (ALPM) for disk devices:
4625 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4626 # (*) Kernel >= 4.15 required, then recommended.
4627 # Multiple values separated with spaces are tried sequentially until success.
4628 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4629 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4630
4631 # Exclude host devices from AHCI link power management.
4632 # Separate multiple hosts with spaces.
4633 #SATA_LINKPWR_BLACKLIST="host1"
4634
4635 # Runtime Power Management for AHCI host and disks devices:
4636 #   on=disable, auto=enable.
4637 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4638 #AHCI_RUNTIME_PM_ON_AC=on
4639 #AHCI_RUNTIME_PM_ON_BAT=on
4640
4641 # Seconds of inactivity before disk is suspended.
4642 AHCI_RUNTIME_PM_TIMEOUT=15
4643
4644 # PCI Express Active State Power Management (PCIe ASPM):
4645 #   default, performance, powersave.
4646 PCIE_ASPM_ON_AC=performance
4647 PCIE_ASPM_ON_BAT=powersave
4648
4649 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4650 # auto = mid on BAT, high on AC; default = use hardware defaults.
4651 RADEON_POWER_PROFILE_ON_AC=high
4652 RADEON_POWER_PROFILE_ON_BAT=low
4653
4654 # Radeon dynamic power management method (DPM): battery, performance.
4655 RADEON_DPM_STATE_ON_AC=performance
4656 RADEON_DPM_STATE_ON_BAT=battery
4657
4658 # Radeon DPM performance level: auto, low, high; auto is recommended.
4659 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4660 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4661
4662 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4663 WIFI_PWR_ON_AC=off
4664 WIFI_PWR_ON_BAT=on
4665
4666 # Disable wake on LAN: Y/N.
4667 WOL_DISABLE=Y
4668
4669 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4670 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4671 SOUND_POWER_SAVE_ON_AC=0
4672 SOUND_POWER_SAVE_ON_BAT=0
4673
4674 # Disable controller too (HDA only): Y/N.
4675 SOUND_POWER_SAVE_CONTROLLER=N
4676
4677 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4678 # Drive can be powered on again by releasing (and reinserting) the eject lever
4679 # or by pressing the disc eject button on newer models.
4680 # Note: an UltraBay/MediaBay hard disk is never powered off.
4681 BAY_POWEROFF_ON_AC=0
4682 BAY_POWEROFF_ON_BAT=0
4683 # Optical drive device to power off (default sr0).
4684 BAY_DEVICE="sr0"
4685
4686 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4687 RUNTIME_PM_ON_AC=on
4688 RUNTIME_PM_ON_BAT=auto
4689
4690 # Exclude PCI(e) device adresses the following list from Runtime PM
4691 # (separate with spaces). Use lspci to get the adresses (1st column).
4692 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4693 RUNTIME_PM_BLACKLIST="01:00.0"
4694
4695 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4696 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4697 # prevents accidential power-on of dGPU in hybrid graphics setups.
4698 # Use "" to disable the feature completely.
4699 # Separate multiple drivers with spaces.
4700 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4701
4702 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4703 USB_AUTOSUSPEND=1
4704
4705 # Exclude listed devices from USB autosuspend (separate with spaces).
4706 # Use lsusb to get the ids.
4707 # Note: input devices (usbhid) are excluded automatically
4708 #USB_BLACKLIST="1111:2222 3333:4444"
4709
4710 # Bluetooth devices are excluded from USB autosuspend:
4711 #   0=do not exclude, 1=exclude.
4712 USB_BLACKLIST_BTUSB=0
4713
4714 # Phone devices are excluded from USB autosuspend:
4715 #   0=do not exclude, 1=exclude (enable charging).
4716 USB_BLACKLIST_PHONE=0
4717
4718 # Printers are excluded from USB autosuspend:
4719 #   0=do not exclude, 1=exclude.
4720 USB_BLACKLIST_PRINTER=1
4721
4722 # WWAN devices are excluded from USB autosuspend:
4723 #   0=do not exclude, 1=exclude.
4724 USB_BLACKLIST_WWAN=1
4725
4726 # Include listed devices into USB autosuspend even if already excluded
4727 # by the blacklists above (separate with spaces).
4728 # Use lsusb to get the ids.
4729 #USB_WHITELIST="1111:2222 3333:4444"
4730
4731 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4732 # (workaround for USB devices that cause shutdown problems).
4733 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4734
4735 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4736 # on system startup: 0=disable, 1=enable.
4737 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4738 #   are ignored when this is enabled!
4739 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4740 RESTORE_DEVICE_STATE_ON_STARTUP=1
4741
4742 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4743 # Separate multiple devices with spaces.
4744 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4745
4746 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4747 # Separate multiple devices with spaces.
4748 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4749
4750 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4751 # (workaround for devices that are blocking shutdown).
4752 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4753
4754 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4755 # (to prevent other operating systems from missing radios).
4756 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4757
4758 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4759 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4760
4761 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4762 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4763
4764 # Radio devices to disable on battery when not in use (not connected):
4765 #   bluetooth, wifi, wwan.
4766 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4767
4768 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4769 # required). Charging starts when the remaining capacity falls below the
4770 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4771 # Main / Internal battery (values in %)
4772 #START_CHARGE_THRESH_BAT0=75
4773 #STOP_CHARGE_THRESH_BAT0=80
4774 # Ultrabay / Slice / Replaceable battery (values in %)
4775 #START_CHARGE_THRESH_BAT1=75
4776 #STOP_CHARGE_THRESH_BAT1=80
4777
4778 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4779 #RESTORE_THRESHOLDS_ON_BAT=1
4780
4781 # ------------------------------------------------------------------------------
4782 # tlp-rdw - Parameters for the radio device wizard
4783 # Possible devices: bluetooth, wifi, wwan.
4784
4785 # Hints:
4786 # - Parameters are disabled by default, remove the leading # to enable them
4787 # - Separate multiple radio devices with spaces
4788
4789 # Radio devices to disable on connect.
4790 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4791 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4792 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4793
4794 # Radio devices to enable on disconnect.
4795 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4796 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4797 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4798
4799 # Radio devices to enable/disable when docked.
4800 #DEVICES_TO_ENABLE_ON_DOCK=""
4801 #DEVICES_TO_DISABLE_ON_DOCK=""
4802
4803 # Radio devices to enable/disable when undocked.
4804 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4805 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4806 #+end_src
4807
4808 ** X
4809
4810 *** xprofile
4811 :PROPERTIES:
4812 :header-args+: :tangle ~/.xprofile
4813 :END:
4814
4815 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4816 contrary, it's automatically sourced by LightDM, my display manager of
4817 choice.
4818
4819 #+begin_src sh :tangle no
4820 xset -b  # disable bell
4821 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
4822
4823 # setxkbmap -option compose:ralt
4824
4825 setxkbmap -option ctrl:nocaps          # turn capslock into control
4826 setxkbmap -option altwin:swap_alt_win  # swap alt and super
4827
4828 if [ $(hostname) = "plasma" ]
4829 then
4830     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
4831 fi
4832
4833 if [ $(hostname) = "enigma" ]
4834 then
4835     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
4836 fi
4837
4838 light -Scrs "intel_backlight" 2
4839
4840 source $HOME/.zprofile
4841
4842 export _JAVA_AWT_WM_NONREPARENTING=1
4843 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4844
4845 if [ $(hostname) = "plasma" ]
4846 then
4847     unlock-def-gk.py &
4848 fi
4849
4850 bspwm &
4851 #+end_src
4852
4853 *** X resources
4854
4855 **** Xresources
4856 :PROPERTIES:
4857 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4858 :END:
4859
4860 #+begin_src conf-xdefaults
4861 #include ".Xresources.d/fonts"
4862 ! #include ".Xresources.d/colors"
4863 #include ".Xresources.d/emacs"
4864 #include ".Xresources.d/rxvt-unicode"
4865 #+end_src
4866
4867 **** Xresources.d
4868
4869 ***** fonts
4870 :PROPERTIES:
4871 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4872 :END:
4873
4874 #+begin_src conf-xdefaults
4875 Xft.lcdfilter: lcddefault
4876 Xft.antialias: true
4877 Xft.autohint: 0
4878 Xft.hinting: true
4879 Xft.hintstyle: hintslight
4880 ! Xft.hintstyle: hintfull
4881 Xft.rgba: rgb
4882 Xft.dpi: 96
4883 #+end_src
4884
4885 ***** colors
4886 :PROPERTIES:
4887 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4888 :END:
4889
4890 #+begin_src conf-xdefaults :tangle no
4891 #include "gruvbox-light.xresources"
4892 ! #include "gruvbox-dark.xresources"
4893 #include "gruvbox-urxvt256.xresources"
4894 #+end_src
4895
4896 #+begin_src conf-xdefaults :tangle no
4897 ! -----------------------------------------------------------------------------
4898 ! File: gruvbox-light.xresources
4899 ! Description: Retro groove colorscheme generalized
4900 ! Author: morhetz <morhetz@gmail.com>
4901 ! Source: https://github.com/morhetz/gruvbox-generalized
4902 ! Last Modified: 6 Sep 2014
4903 ! -----------------------------------------------------------------------------
4904
4905 ! hard contrast: *background: #f9f5d7
4906 *background: #fbf1c7
4907 ! soft contrast: *background: #f2e5bc
4908 *foreground: #3c3836
4909 ! Black + DarkGrey
4910 *color0:  #fdf4c1
4911 *color8:  #928374
4912 ! DarkRed + Red
4913 *color1:  #cc241d
4914 *color9:  #9d0006
4915 ! DarkGreen + Green
4916 *color2:  #98971a
4917 *color10: #79740e
4918 ! DarkYellow + Yellow
4919 *color3:  #d79921
4920 *color11: #b57614
4921 ! DarkBlue + Blue
4922 *color4:  #458588
4923 *color12: #076678
4924 ! DarkMagenta + Magenta
4925 *color5:  #b16286
4926 *color13: #8f3f71
4927 ! DarkCyan + Cyan
4928 *color6:  #689d6a
4929 *color14: #427b58
4930 ! LightGrey + White
4931 *color7:  #7c6f64
4932 *color15: #3c3836
4933 #+end_src
4934
4935 #+begin_src conf-xdefaults :tangle no
4936 ! -----------------------------------------------------------------------------
4937 ! File: gruvbox-dark.xresources
4938 ! Description: Retro groove colorscheme generalized
4939 ! Author: morhetz <morhetz@gmail.com>
4940 ! Source: https://github.com/morhetz/gruvbox-generalized
4941 ! Last Modified: 6 Sep 2014
4942 ! -----------------------------------------------------------------------------
4943
4944 ! hard contrast: *background: #1d2021
4945 *background: #282828
4946 ! soft contrast: *background: #32302f
4947 *foreground: #ebdbb2
4948 ! Black + DarkGrey
4949 *color0:  #282828
4950 *color8:  #928374
4951 ! DarkRed + Red
4952 *color1:  #cc241d
4953 *color9:  #fb4934
4954 ! DarkGreen + Green
4955 *color2:  #98971a
4956 *color10: #b8bb26
4957 ! DarkYellow + Yellow
4958 *color3:  #d79921
4959 *color11: #fabd2f
4960 ! DarkBlue + Blue
4961 *color4:  #458588
4962 *color12: #83a598
4963 ! DarkMagenta + Magenta
4964 *color5:  #b16286
4965 *color13: #d3869b
4966 ! DarkCyan + Cyan
4967 *color6:  #689d6a
4968 *color14: #8ec07c
4969 ! LightGrey + White
4970 *color7:  #a89984
4971 *color15: #ebdbb2
4972 #+end_src
4973
4974 #+begin_src conf-xdefaults :tangle no
4975 ! -----------------------------------------------------------------------------
4976 ! File: gruvbox-urxvt256.xresources
4977 ! Description: Retro groove colorscheme generalized
4978 ! Author: morhetz <morhetz@gmail.com>
4979 ! Source: https://github.com/morhetz/gruvbox-generalized
4980 ! Last Modified: 13 Dec 2013
4981 ! -----------------------------------------------------------------------------
4982
4983 URxvt.color24:  #076678
4984 URxvt.color66:  #427b58
4985 URxvt.color88:  #9d0006
4986 URxvt.color96:  #8f3f71
4987 URxvt.color100: #79740e
4988 URxvt.color108: #8ec07c
4989 URxvt.color109: #83a598
4990 URxvt.color130: #af3a03
4991 URxvt.color136: #b57614
4992 URxvt.color142: #b8bb26
4993 URxvt.color167: #fb4934
4994 URxvt.color175: #d3869b
4995 URxvt.color208: #fe8019
4996 URxvt.color214: #fabd2f
4997 URxvt.color223: #ebdbb2
4998 URxvt.color228: #f2e5bc
4999 URxvt.color229: #fbf1c7
5000 URxvt.color230: #f9f5d7
5001 URxvt.color234: #1d2021
5002 URxvt.color235: #282828
5003 URxvt.color236: #32302f
5004 URxvt.color237: #3c3836
5005 URxvt.color239: #504945
5006 URxvt.color241: #665c54
5007 URxvt.color243: #7c6f64
5008 URxvt.color244: #928374
5009 URxvt.color245: #928374
5010 URxvt.color246: #a89984
5011 URxvt.color248: #bdae93
5012 URxvt.color250: #d5c4a1
5013 #+end_src
5014
5015 ***** emacs
5016 :PROPERTIES:
5017 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
5018 :END:
5019
5020 #+begin_src conf-xdefaults
5021 Emacs.menuBar: off
5022 Emacs.toolBar: off
5023 Emacs.verticalScrollBars: off
5024 Emacs.cursorBlink: off
5025 Emacs.FontBackend: xft,x
5026 ! Emacs.font: Ubuntu Mono-12
5027 ! Emacs.font: Triplicate T4C-11
5028 ! Emacs.font: Ubuntu Mono-10.5
5029 ! Emacs.font: Ubuntu Mono-12
5030 ! Emacs.font: Iosevka-11
5031
5032 ! Emacs.font: Fira Mono:size=15
5033 ! Emacs.font: DejaVu Sans Mono:size=15
5034 ! Emacs.font: Inconsolata:size=17
5035 ! Emacs.font: Inconsolata:size=16
5036 ! Emacs.font: Inconsolata LGC:size=14
5037 ! Emacs.font: Source Code Pro Medium-10.5
5038 Emacs.font: Source Code Pro:size=14
5039 ! Emacs.font: Ubuntu Mono:size=16
5040 ! Emacs.font: Iosevka:size=16
5041 #+end_src
5042
5043 ***** rxvt-unicode
5044 :PROPERTIES:
5045 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
5046 :END:
5047
5048 #+begin_src conf-xdefaults
5049 ! Font
5050 URxvt.font:             xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
5051 URxvt.boldFont:         xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
5052 URxvt.italicFont:       xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
5053 URxvt.bolditalicFont:   xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
5054
5055 URxvt.xftAntialias:     true
5056 URxvt.letterSpace:      0
5057
5058 URxvt.depth:                0
5059 URxvt.loginShell:           true
5060 URxvt.saveLines:            100000
5061 URxvt.internalBorder:       3
5062 URxvt.lineSpace:            0
5063 URxvt.scrollBar:            false
5064 URxvt.scrollStyle:          rxvt
5065 URxvt*scrollTtyOutput:      false
5066 URxvt*scrollWithBuffer:     true
5067 URxvt*scrollTtyKeypress:    true
5068 URxvt.keysym.Shift-Up:      command:\033]720;1\007
5069 URxvt.keysym.Shift-Down:    command:\033]721;1\007
5070
5071 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
5072 URxvt.url-select.launcher:  firefox
5073 URxvt.url-select.underline: true
5074 URxvt.keysym.M-u:           perl:url-select:select_next
5075 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
5076 URxvt.keysym.M-s:           perl:keyboard-select:search
5077 URxvt.url-launcher:         /usr/bin/firefox
5078 URxvt.matcher.button:       1
5079 URxvt.iso14755:             false
5080 URxvt.iso14755_53:          false
5081 URxvt.keysym.M-c:           perl:clipboard:copy
5082 URxvt.keysym.M-v:           perl:clipboard:paste
5083 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
5084 URxvt.keysym.C-Up:          font-size:increase
5085 URxvt.keysym.C-Down:        font-size:decrease
5086 URxvt.keysym.C-S-Up:        font-size:incglobal
5087 URxvt.keysym.C-S-Down:      font-size:decglobal
5088 URxvt.keysym.C-equal:       font-size:reset
5089 !URxvt.keysym.C-question:   font-size:show
5090
5091 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5092
5093 !urxvt*foreground: white
5094 !urxvt*background: black
5095
5096 !*color0:  #2E3436
5097 !*color1:  #a40000
5098 !*color2:  #4E9A06
5099 !*color3:  #C4A000
5100 !*color4:  #3465A4
5101 !*color5:  #75507B
5102 !*color6:  #ce5c00
5103 !*color7:  #babdb9
5104 !*color8:  #555753
5105 !*color9:  #EF2929
5106 !*color10: #8AE234
5107 !*color11: #FCE94F
5108 !*color12: #729FCF
5109 !*color13: #AD7FA8
5110 !*color14: #fcaf3e
5111 !*color15: #EEEEEC
5112
5113 !URxvt.foreground: #C8C8C8
5114 !URxvt.background: #FFFFFF
5115
5116 !! black
5117 !*color0:  #2E3436
5118 !*color8:  #555753
5119 !! red
5120 !*color1:  #a40000
5121 !*color9:  #EF2929
5122 !! green
5123 !*color2:  #4E9A06
5124 !*color10: #8AE234
5125 !! yellow
5126 !*color3:  #C4A000
5127 !*color11: #FCE94F
5128 !! blue
5129 !*color4:  #3465A4
5130 !*color12: #729FCF
5131 !! purple
5132 !*color5:  #75507B
5133 !*color13: #AD7FA8
5134 !! orange (replaces cyan)
5135 !*color6:  #ce5c00
5136 !*color14: #fcaf3e
5137 !! white
5138 !*color7:  #babdb9
5139 !*color15: #EEEEEC
5140
5141 ! Tango colour theme for rxvt-unicode
5142 URxvt.background: #FFFFFF
5143 URxvt.foreground: #000000
5144
5145 ! Black
5146 URxvt.color0: #2E3436
5147 URxvt.color8: #757773
5148
5149 ! Red
5150 URxvt.color1: #CC0000
5151 URxvt.color9: #EF2929
5152
5153 ! Green
5154 URxvt.color2: #4E9A06
5155 URxvt.color10: #8AE234
5156
5157 ! Yellow
5158 URxvt.color3: #C4A000
5159 URxvt.color11: #FCE94F
5160
5161 ! Blue
5162 URxvt.color4: #3465A4
5163 URxvt.color12: #729FCF
5164
5165 ! Magenta
5166 URxvt.color5: #75507B
5167 URxvt.color13: #AD7FA8
5168
5169 !! Cyan
5170 !URxvt.color6: #06989A
5171 !URxvt.color14: #34E2E2
5172 ! orange (replaces cyan)
5173 ,*color6:  #ce5c00
5174 ,*color14: #fcaf3e
5175
5176 ! White
5177 URxvt.color7: #D3D7CF
5178 URxvt.color15: #EEEEEC
5179 #+end_src
5180
5181 *** xkb us_ab keyboard layout
5182
5183 #+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5184 default partial alphanumeric_keys
5185 xkb_symbols "us_ab" {
5186     include "us(basic)"
5187     name[Group1]= "English (US)(aminb)";
5188
5189     key <MENU> { [ Alt_R ] };
5190 };
5191 #+end_src
5192
5193 ** XDG
5194 :PROPERTIES:
5195 :header-args+: :tangle ~/.config/user-dirs.dirs
5196 :END:
5197
5198 #+begin_src conf
5199 XDG_DESKTOP_DIR="$HOME/Desktop"
5200 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5201 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5202 XDG_MUSIC_DIR="$HOME/usr/music"
5203 XDG_PICTURES_DIR="$HOME/usr/pics"
5204 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5205 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5206 XDG_VIDEOS_DIR="$HOME/usr/vids"
5207 #+end_src
5208
5209 ** Zathura
5210 :PROPERTIES:
5211 :header-args+: :tangle ~/.config/zathura/zathurarc
5212 :END:
5213
5214 #+begin_src conf
5215 set smooth-scroll true
5216 set selection-clipboard clipboard
5217 set zoom-step 05
5218 set default-bg "#272727"
5219 set statusbar-bg "#272727"
5220 set inputbar-bg "#373737"
5221 #+end_src
5222
5223 ** Zsh
5224
5225 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5226 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5227 installed.
5228
5229 *** zimrc
5230 :PROPERTIES:
5231 :header-args+: :tangle ~/.zimrc
5232 :END:
5233
5234 #+begin_src sh
5235
5236
5237 #################
5238 # CORE SETTINGS #
5239 #################
5240
5241 #
5242 # Zim settings
5243 #
5244
5245 # Select what modules you would like enabled.
5246 # The second line of modules may depend on options set by modules in the first
5247 # line. These dependencies are noted on the respective module's README.md.
5248 zmodules=(directory environment git git-info history input ssh utility custom \
5249           syntax-highlighting history-substring-search prompt completion)
5250
5251
5252 ###################
5253 # MODULE SETTINGS #
5254 ###################
5255
5256 #
5257 # Prompt
5258 #
5259
5260 # Set your desired prompt here
5261 zprompt_theme='pure'
5262 #PURE_PROMPT_SYMBOL=λ
5263 #PURE_PROMPT_SYMBOL=δ
5264 PURE_PROMPT_SYMBOL=➜
5265
5266 #
5267 # Completion
5268 #
5269
5270 # set an optional host-specific filename for the completion cache file
5271 # if none is provided, the default '.zcompdump' is used.
5272 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5273
5274 #
5275 # Utility
5276 #
5277
5278 # Uncomment to enable command correction prompts
5279 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5280 setopt CORRECT
5281
5282 #
5283 # Environment
5284 #
5285
5286 # Set the string below to the desired terminal title format string.
5287 # The terminal title is redrawn upon directory change, however, variables like
5288 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5289 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5290 # The example below uses the following format: 'username@host:/current/directory'
5291 ztermtitle='%n@%m:%~'
5292
5293 #
5294 # Input
5295 #
5296
5297 # Uncomment to enable double-dot expansion.
5298 # This appends '../' to your input for each '.' you type after an initial '..'
5299 #zdouble_dot_expand='true'
5300
5301 #
5302 # Syntax-Highlighting
5303 #
5304
5305 # This determines what highlighters will be used with the syntax-highlighting module.
5306 # Documentation of the highlighters can be found here:
5307 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5308 # For (u)rxvt, termite and gnome-terminal users,
5309 # removing the 'cursor' highlighter will fix the disappearing cursor problem
5310 #zhighlighters=(main brackets cursor)
5311 zhighlighters=(main brackets pattern)
5312
5313
5314 #
5315 # SSH
5316 #
5317
5318 # Load these ssh identities with the ssh module
5319 zssh_ids=(id_ed25519_bandali)
5320
5321
5322 #
5323 # Pacman
5324 #
5325
5326 # Set (optional) pacman front-end.
5327 zpacman_frontend='yay'
5328
5329 # Load any helper scripts as defined here
5330 #zpacman_helper=(aur)
5331 #+end_src
5332
5333 *** zlogin
5334 :PROPERTIES:
5335 :header-args+: :tangle ~/.zlogin
5336 :END:
5337
5338 #+begin_src sh
5339
5340
5341 #
5342 # User configuration sourced by login shells
5343 #
5344
5345 # Initialize zim
5346 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5347 #+end_src
5348
5349 *** zprofile
5350 :PROPERTIES:
5351 :header-args+: :tangle ~/.zprofile
5352 :END:
5353
5354 #+begin_src sh
5355 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5356 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
5357 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
5358 export XDG_CONFIG_HOME=$HOME/.config
5359 export XDG_DATA_HOME=$HOME/.local/share
5360 export XDG_DATA_DIRS=/usr/local/share:/usr/share
5361 export MAILDIR="$HOME/mail"
5362 export CVS_RSH=ssh
5363 #export MATHMODELS=$HOME/src/eiffel/mathmodels
5364 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5365 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5366
5367 # Eiffel2Java stuff
5368 #export JAVA_HOME=/usr/lib/jvm/default
5369 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5370 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5371 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5372
5373 #export PATH="$HOME/usr/build/pvs:$PATH"
5374 #export SBCLISP_HOME=/usr/share/sbcl-source
5375 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5376
5377 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
5378
5379 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5380 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5381
5382 export NIXPKGS=$HOME/src/git/nixpkgs
5383
5384 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
5385
5386 export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
5387 export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH"
5388 export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
5389 export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
5390 export GIT_SSL_CAINFO="$SSL_CERT_FILE"
5391 #+end_src
5392
5393 *** zshenv
5394 :PROPERTIES:
5395 :header-args+: :tangle ~/.zshenv
5396 :END:
5397
5398 #+begin_src sh
5399 # Ensure that a non-login, non-interactive shell has a defined environment.
5400 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5401   source "${ZDOTDIR:-$HOME}/.zprofile"
5402 fi
5403 #+end_src
5404
5405 *** zshrc
5406 :PROPERTIES:
5407 :header-args+: :tangle ~/.zshrc
5408 :END:
5409
5410 #+begin_src sh
5411 # Bash-like navigation
5412 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5413 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5414 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5415 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
5416
5417 #disable -r time       # disable shell reserved word
5418 #alias time='time -p'  # -p for POSIX output
5419
5420 # rehash if last command was pacaur or pacman
5421 # (so that zsh picks up changes in $PATH immediately)
5422 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5423
5424 #
5425 # User configuration sourced by interactive shells
5426 #
5427
5428 # Change default zim location
5429 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5430
5431 # Start zim
5432 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5433
5434 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5435 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5436
5437 setopt globdots
5438
5439 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
5440 # source ~/.zsh/zsh-autopair/autopair.zsh
5441
5442
5443 ### fzf ###
5444
5445 source /usr/share/fzf/key-bindings.zsh
5446 source /usr/share/fzf/completion.zsh
5447
5448 # Accept history selection instead of putting it on
5449 # the command line
5450 fzf-history-widget-accept() {
5451   fzf-history-widget
5452   zle accept-line
5453 }
5454 #zle     -N   fzf-history-widget-accept
5455 #bindkey '^R' fzf-history-widget-accept
5456
5457 # alt+c preview
5458 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5459
5460 ### fzf ###
5461
5462
5463 # aliases
5464 alias mpv="mpv --ytdl-format mp4"
5465 alias mv="mv -iv"
5466 alias cp="cp -iv"
5467 alias scl=systemctl
5468 alias jcl=journalctl
5469 alias m="mbsync uwaterloo; mbsync amin"
5470 alias best="youtube-dl -f best"
5471 alias sd="ssh deb"
5472 alias sf="ssh fp"
5473 alias sn="ssh nix"
5474
5475 aur() {
5476    cd ~/usr/build
5477    git clone https://aur.archlinux.org/${1}.git
5478    cd ${1}
5479 }
5480
5481 # i-beam cursor
5482 echo -e "\033[5 q"
5483 #echo -e "\033[6 q"
5484 #+end_src
5485
5486 * Scripts
5487
5488 This section contains various useful scripts and the ones used by the
5489 programs above. For instance, =toggle-tablet= for switching to and
5490 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5491 Xfce's presentation mode which keeps the screen awake, and
5492 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5493 exact brightness value.
5494
5495 ** battery-percentage-time
5496 :PROPERTIES:
5497 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
5498 :END:
5499
5500 #+begin_src sh :tangle no
5501 dbus_send() {
5502         label=$1
5503         dbus-send --print-reply=literal --system \
5504                 --dest=org.freedesktop.UPower \
5505                 /org/freedesktop/UPower/devices/battery_BAT0 \
5506                 org.freedesktop.DBus.Properties.Get \
5507                 string:org.freedesktop.UPower.Device \
5508                 string:"${label}" | awk '{print $3}'
5509 }
5510
5511 perc=$(dbus_send 'Percentage')
5512 state=$(dbus_send 'State')
5513
5514 if [ "$state" -eq 2 ]; then  # Discharging
5515         secs=$(dbus_send 'TimeToEmpty')
5516 elif [ "$state" -eq 1 ]; then  # Charging
5517         secs=$(dbus_send 'TimeToFull')
5518 fi
5519
5520 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5521 #+end_src
5522
5523 ** my-i3status.py
5524 :PROPERTIES:
5525 :header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
5526 :END:
5527
5528 #+begin_src python :comments none
5529 # -*- coding: utf-8 -*-
5530
5531 # This script is a simple wrapper which prefixes each i3status line with custom
5532 # information. It is based on:
5533 # https://github.com/i3/i3status/blob/master/contrib/wrapper.py
5534 #
5535 # In ~/.i3status.conf, add the following line:
5536 #     output_format = "i3bar"
5537 # in the 'general' section.
5538 # Then, in ~/.config/i3/config or ~/.config/sway/config add:
5539 #     status_command i3status | my-i3status.py
5540 # in the 'bar' section.  Make sure my-i3status.py is in $PATH.
5541 #
5542 # © 2012 Valentin Haenel <valentin.haenel@gmx.de>
5543 # © 2018 Amin Bandali <bandali@gnu.org>
5544 #
5545 # This program is free software. It comes without any warranty, to the extent
5546 # permitted by applicable law. You can redistribute it and/or modify it under
5547 # the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
5548 # 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
5549 # details.
5550
5551 import sys
5552 import json
5553 import os
5554
5555 def get_nosleep():
5556     """ Return true if ~/.nosleep exists. """
5557     return os.path.isfile(os.path.expanduser("~/.nosleep"))
5558
5559 def print_line(message):
5560     """ Non-buffered printing to stdout. """
5561     sys.stdout.write(message + '\n')
5562     sys.stdout.flush()
5563
5564 def read_line():
5565     """ Interrupted respecting reader for stdin. """
5566     # try reading a line, removing any extra whitespace
5567     try:
5568         line = sys.stdin.readline().strip()
5569         # i3status sends EOF, or an empty line
5570         if not line:
5571             sys.exit(3)
5572         return line
5573     # exit on ctrl-c
5574     except KeyboardInterrupt:
5575         sys.exit()
5576
5577 if __name__ == '__main__':
5578     # Skip the first line which contains the version header.
5579     print_line(read_line())
5580
5581     # The second line contains the start of the infinite array.
5582     print_line(read_line())
5583
5584     while True:
5585         line, prefix = read_line(), ''
5586         # ignore comma at start of lines
5587         if line.startswith(','):
5588             line, prefix = line[1:], ','
5589
5590         if get_nosleep():
5591             j = json.loads(line)
5592             # insert information into the start of the json, but could be anywhere
5593             j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
5594             # and echo back new encoded json
5595             print_line(prefix+json.dumps(j))
5596         else:
5597             print_line(prefix+line)
5598 #+end_src
5599
5600 ** rofi-light
5601 :PROPERTIES:
5602 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5603 :END:
5604
5605 #+begin_src bash
5606 cur=$(light -G)
5607 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
5608 [ -n "$val" ] && light -S $val
5609 #+end_src
5610
5611 ** rofi-remmina.py
5612 :PROPERTIES:
5613 :header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
5614 :END:
5615
5616 #+begin_src python
5617 import ConfigParser
5618 import os
5619 from subprocess import Popen, PIPE
5620
5621 remmina_dir = os.path.expanduser("~/.local/share/remmina")
5622
5623 fdict = dict()
5624
5625 for f in os.listdir(remmina_dir):
5626     fp = os.path.join(remmina_dir, f)
5627     c = ConfigParser.ConfigParser()
5628     c.read(fp)
5629     n = c.get('remmina', 'name')
5630     fdict[n] = fp
5631
5632 lines = max(min(15, len(fdict)), 1);
5633 width = len(max(fdict.keys(), key=len))
5634 rofi = Popen(["rofi", "-i", "-dmenu", \
5635               "-l", str(lines), "-width", str(width), \
5636               "-p", "connection"], stdout=PIPE, stdin=PIPE)
5637 selected = rofi.communicate("\n" \
5638                             .join(fdict.keys()) \
5639                             .encode("utf-8"))[0] \
5640                .decode("utf-8") \
5641                .strip()
5642 rofi.wait()
5643
5644 r = Popen(["remmina", "-c", fdict[selected]])
5645 r.wait()
5646 #+end_src
5647
5648 ** s (run sway)
5649 :PROPERTIES:
5650 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5651 :END:
5652
5653 #+begin_src bash
5654 export _JAVA_AWT_WM_NONREPARENTING=1
5655 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5656 light -Nr 2
5657 source $HOME/.zprofile
5658 sway
5659 #+end_src
5660
5661 ** sway-ws-util
5662 :PROPERTIES:
5663 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5664 :END:
5665
5666 #+begin_src bash
5667 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5668 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5669 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5670 dest_ws=-1
5671 op=-1
5672
5673 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5674   op="$1"
5675   if [ "$2" = "prev" ]; then
5676     dest_ws="$prev_ws"
5677   elif [ "$2" = "next" ]; then
5678     dest_ws="$next_ws"
5679   else
5680     echo "Usage: $0 $1 {prev|next} [follow]"
5681     exit 1
5682   fi
5683 else
5684   echo "Usage: $0 {switch|move} {prev|next} [follow]"
5685   exit 1
5686 fi
5687
5688 if [ "$op" = "switch" ]; then
5689   sway workspace "$dest_ws"
5690 elif [ "$op" = "move" ]; then
5691   sway move container to workspace "$dest_ws"
5692   if [ "$3" = "follow" ]; then
5693     sway workspace "$dest_ws"
5694   fi
5695 fi
5696 #+end_src
5697
5698 ** toggle-layout
5699 :PROPERTIES:
5700 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5701 :END:
5702
5703 #+begin_src bash :tangle no
5704 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5705
5706 if [ "$lang" = "us" ]; then
5707     setxkbmap ir
5708 else
5709     setxkbmap us
5710     # xmodmap $HOME/.Xmodmap
5711 fi
5712 #+end_src
5713
5714 ** toggle-presentation-mode
5715 :PROPERTIES:
5716 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5717 :END:
5718
5719 #+begin_src bash :tangle no
5720 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5721 #+end_src
5722
5723 ** toggle-tablet
5724 :PROPERTIES:
5725 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5726 :END:
5727
5728 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5729 a few things:
5730
5731 - rotates the screen using =xrandr=, so that rotating the physical
5732   display of my X220t would have the laptop's battery on the right
5733   hand side,
5734 - enables touch screen,
5735 - properly rotates the stylus pen and touch screen pointers, and
5736 - toggles between RGB and Vertical BGR sub-pixel order.
5737
5738 #+begin_src bash :tangle no
5739 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5740     0)  # Screen is not rotated, we should rotate it right (90°)
5741            xrandr -o 3
5742            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5743            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5744            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5745            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5746            ;;
5747     1)  # Currently top is rotated right, we should set it normal (0°)
5748           xrandr -o 0
5749           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5750           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5751           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5752           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5753           ;;
5754     *)
5755            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5756            exit 1
5757            ;;
5758 esac
5759 #+end_src
5760
5761 ** unlock-def-gk.py
5762 :PROPERTIES:
5763 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5764 :END:
5765
5766 #+begin_src python :tangle no
5767 import gnomekeyring as gk
5768 # list_item_ids_sync('login')[0] == 1L
5769 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5770 #+end_src
5771
5772 ** volume-info
5773 :PROPERTIES:
5774 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5775 :END:
5776
5777 #+begin_src sh :tangle no
5778 cur_vol=$(pamixer --get-volume)
5779
5780 if [ $(pamixer --get-mute) = true ]; then
5781   printf 'mt \n' "$cur_vol"
5782 else
5783   printf '%02d \n' "$cur_vol"
5784 fi
5785 #+end_src
5786
5787 ** wp
5788
5789 My little wallpaper changer script.
5790
5791 *** wp
5792 :PROPERTIES:
5793 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5794 :END:
5795
5796 #+begin_src bash :tangle no
5797 export DISPLAY=:0
5798
5799 case "$1" in
5800   "day")
5801     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5802     ;;
5803   "night")
5804     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5805     ;;
5806   *)
5807     echo $"Usage: $0 {day|night}"
5808     exit 1
5809 esac
5810 #+end_src
5811
5812 *** wp-auto
5813 :PROPERTIES:
5814 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5815 :END:
5816
5817 #+begin_src bash :tangle no
5818 SED=$(which sed)
5819 ROFI=$(which rofi)
5820
5821 export DISPLAY=:0
5822 HOUR=$(date +%H)
5823
5824 if [ -z "${SED}" ]
5825 then
5826     echo "Did not find 'sed', script cannot continue."
5827     exit 1
5828 fi
5829 if [ -z "${ROFI}" ]
5830 then
5831     echo "Did not find rofi, there is no point to continue."
5832     exit 1
5833 fi
5834
5835 ###
5836 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5837 # Repeated calls should leave the config clean-ish
5838 ###
5839 function set_theme()
5840 {
5841     CDIR="${HOME}/.config/rofi/"
5842     if [ ! -d "${CDIR}" ]
5843     then
5844         mkdir -p ${CDIR}
5845     fi
5846     if [ -f "${CDIR}/config" ]
5847     then
5848         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5849     fi
5850     echo "rofi.theme: ${1}" >> "${CDIR}/config"
5851
5852 }
5853
5854 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5855     then
5856         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5857         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5858         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5859     else
5860         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5861         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5862         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5863 fi
5864 #+end_src
5865
5866 *** wp.service
5867 :PROPERTIES:
5868 :header-args+: :tangle ~/.config/systemd/user/wp.service
5869 :END:
5870
5871 #+begin_src conf :tangle no
5872 [Unit]
5873 Description=wallpaper service
5874
5875 [Service]
5876 Type=oneshot
5877 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5878 #+end_src
5879
5880 *** wp.timer
5881 :PROPERTIES:
5882 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5883 :END:
5884
5885 #+begin_src conf :tangle no
5886 [Unit]
5887 [Unit]
5888 Description=wallpaper timer
5889
5890 [Timer]
5891 OnCalendar=07,21:00
5892 Unit=wp.service
5893 Persistent=true
5894
5895 [Install]
5896 WantedBy=timers.target
5897 #+end_src
5898
5899 ** zathura-sync.sh
5900 :PROPERTIES:
5901 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5902 :END:
5903
5904 #+begin_src sh
5905 pos="$1"
5906 pdffile="$2"
5907 zathura --synctex-forward "$pos" "$pdffile" || \
5908     (
5909     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5910     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5911 #+end_src
5912 ** Fun :)
5913
5914 *** eat-em
5915 :PROPERTIES:
5916 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5917 :END:
5918
5919 #+begin_src sh
5920 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5921 # [ESC] character in original post removed here.
5922
5923 # ANSI Color -- use these variables to easily have different color
5924 #    and format output. Make sure to output the reset sequence after
5925 #    colors (f = foreground, b = background), and use the 'off'
5926 #    feature for anything you turn on.
5927
5928 initializeANSI()
5929 {
5930  esc="$(echo -en '\e')"
5931
5932   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
5933   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
5934   cyanf="${esc}[36m";    whitef="${esc}[37m"
5935
5936   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
5937   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
5938   cyanb="${esc}[46m";    whiteb="${esc}[47m"
5939
5940   boldon="${esc}[1m";    boldoff="${esc}[22m"
5941   italicson="${esc}[3m"; italicsoff="${esc}[23m"
5942   ulon="${esc}[4m";      uloff="${esc}[24m"
5943   invon="${esc}[7m";     invoff="${esc}[27m"
5944
5945   reset="${esc}[0m"
5946 }
5947
5948 # note in this first use that switching colors doesn't require a reset
5949 # first - the new color overrides the old one.
5950
5951 #clear
5952
5953 initializeANSI
5954
5955 cat << EOF
5956
5957  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
5958  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5959  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5960  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
5961  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
5962  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
5963
5964  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
5965  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5966  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5967  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
5968  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
5969  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
5970
5971 EOF
5972 #+end_src
5973
5974 *** invade-em
5975 :PROPERTIES:
5976 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5977 :END:
5978
5979 #+begin_src bash
5980 #
5981 # ANSI color scheme script featuring Space Invaders
5982 #
5983 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5984 # Modified by lolilolicon
5985 #
5986
5987 f=3 b=4
5988 for j in f b; do
5989   for i in {0..7}; do
5990     printf -v $j$i %b "\e[${!j}${i}m"
5991   done
5992 done
5993 bld=$'\e[1m'
5994 rst=$'\e[0m'
5995
5996 cat << EOF
5997
5998  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5999  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
6000  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
6001  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
6002
6003  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
6004  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
6005  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
6006  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
6007
6008
6009                                      $f7▌$rst
6010
6011                                    $f7▌$rst
6012
6013                               $f7    ▄█▄    $rst
6014                               $f7▄█████████▄$rst
6015                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
6016
6017 EOF
6018 #+end_src