git.shemshak.org - ~bandali/configs/blob - redshift/.config/redshift.conf

   1 ; Global settings for redshift
   2 [redshift]
   3 ; Set the day and night screen temperatures (Neutral is 6500K)
   4 ;temp-day=5700
   5 ;temp-night=3500
   6
   7 ;temp-day=6500
   8 temp-day=6200
   9 ;temp-night=4800
  10 ;temp-night=5000
  11 ;temp-night=4500
  12 temp-night=4000
  13
  14 ; Enable/Disable a smooth transition between day and night
  15 ; 0 will cause a direct change from day to night screen temperature.
  16 ; 1 will gradually increase or decrease the screen temperature.
  17 transition=1
  18
  19 ; Set the screen brightness. Default is 1.0.
  20 ;brightness=0.9
  21 ; It is also possible to use different settings for day and night
  22 ; since version 1.8.
  23 ;brightness-day=0.7
  24 ;brightness-night=0.4
  25 ; Set the screen gamma (for all colors, or each color channel
  26 ; individually)
  27 ;gamma=0.8
  28 ;gamma=1.0
  29 ;gamma=0.8:0.7:0.8
  30 ; This can also be set individually for day and night since
  31 ; version 1.10.
  32 ;gamma-day=0.8:0.7:0.8
  33 ;gamma-night=0.6
  34
  35 ; Set the location-provider: 'geoclue2' or 'manual'
  36 ; type 'redshift -l list' to see possible values.
  37 ; The location provider settings are in a different section.
  38 ;location-provider=manual
  39 location-provider=geoclue2
  40
  41 ; Set the adjustment-method: 'randr', 'vidmode'
  42 ; type 'redshift -m list' to see all possible values.
  43 ; 'randr' is the preferred method, 'vidmode' is an older API.
  44 ; but works in some cases when 'randr' does not.
  45 ; The adjustment method settings are in a different section.
  46 adjustment-method=randr
  47
  48 ; Configuration of the location-provider:
  49 ; type 'redshift -l PROVIDER:help' to see the settings.
  50 ; ex: 'redshift -l manual:help'
  51 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
  52 ; are negative numbers.
  53 ;[manual]
  54 ;lat=48.1
  55 ;lon=11.6
  56
  57 ; Configuration of the adjustment-method
  58 ; type 'redshift -m METHOD:help' to see the settings.
  59 ; ex: 'redshift -m randr:help'
  60 ; In this example, randr is configured to adjust screen 1.
  61 ; Note that the numbering starts from 0, so this is actually the
  62 ; second screen. If this option is not specified, Redshift will try
  63 ; to adjust _all_ screens.
  64 ;[randr]
  65 ;screen=1