[emacs] adjust my preferred undo mechanism
[~bandali/configs] / rc.org
1 #+title: rc.org
2 #+property: header-args :comments link :mkdirp yes :results silent
3
4 * About
5
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
9
10 Note: This file is best viewed inside Emacs with org mode.
11
12 * Configs
13
14 This section contains the configuration files (dotfiles) of various
15 programs I use.
16
17 ** bspwm
18
19 *** bspwmrc
20 :PROPERTIES:
21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22 :END:
23
24 #+begin_src sh :tangle no
25 sxhkd &
26 sh ~/.fehbg &
27 xfce4-panel -d &
28 compton &
29 sleep 0.5 && pasystray --notify=all &
30
31 bspc monitor -d I II III IV V VI VII VIII IX X
32 #bspc monitor eDP-1 -d I II III IV V
33 #bspc monitor HDMI-1 -d VI VII VIII IX X
34
35 #bspc config border_width 2
36 #bspc config window_gap 8
37 bspc config window_gap 0
38
39 bspc config bottom_padding 26
40
41 bspc config split_ratio 0.52
42 bspc config borderless_monocle true
43 bspc config gapless_monocle true
44 bspc config click_to_focus button1
45 bspc config directional_focus_tightness low
46
47 #bspc rule -a Firefox desktop='^1' follow=on
48 bspc rule -a Nightly desktop='^1' follow=on
49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
50 #bspc rule -a Chromium desktop='^4' follow=on
51 bspc rule -a URxvt state=floating
52 bspc rule -a URxvt:tiled state=tiled
53 bspc rule -a Connman-gtk state=floating
54 bspc rule -a Xfce4-panel state=floating
55 bspc rule -a TelegramDesktop state=floating
56 bspc rule -a Ec state=floating
57 bspc rule -a Pavucontrol state=floating
58 bspc rule -a Eog state=floating
59 bspc rule -a Seahorse state=floating
60 bspc rule -a mpv state=floating
61 bspc rule -a Evince state=floating
62 bspc rule -a Meld state=floating
63 bspc rule -a Autokey-gtk state=floating
64 bspc rule -a Mousepad state=floating
65 bspc rule -a Wrapper-1.0 state=floating
66 bspc rule -a File-roller state=floating
67 bspc rule -a Gnome-disks state=floating
68 bspc rule -a Termite state=floating
69 bspc rule -a Termite:tiled state=tiled
70 bspc rule -a Thunderbird:Calendar state=floating
71 bspc rule -a Audacity state=floating
72 bspc rule -a Proof state=floating # pvs x-show-proof
73 bspc rule -a Nm-connection-editor state=floating
74 bspc rule -a Wire state=floating
75 bspc rule -a discord state=floating
76 bspc rule -a X2goclient state=floating
77 bspc rule -a SimpleScreenRecorder state=floating
78 bspc rule -a Gimp state=floating
79 bspc rule -a Wrapper-2.0 state=floating
80 bspc rule -a Zathura state=tiled
81 #+end_src
82
83 *** sxhkdrc
84 :PROPERTIES:
85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86 :END:
87
88 #+begin_src conf :tangle no
89 #
90 # wm independent hotkeys
91 #
92
93 # terminal emulator
94 super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97 #super + {_,shift} + Return
98 # termite{_, --name=tiled}
99
100 # program launcher
101 super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104 super + alt + space
105 xfce4-popup-whiskermenu
106
107 # window finder
108 super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111 # password manager
112 alt + space
113 rofi-pass
114
115 # firefox
116 #super + r
117 # firefox
118
119 # chromium
120 #super + c
121 # chromium -incognito
122
123 # emacs
124 super + e
125 emacs
126
127 # make sxhkd reload its configuration files:
128 super + Escape
129 pkill -USR1 -x sxhkd
130
131 # volume {up,down}
132 XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135 # mute
136 XF86AudioMute
137 pamixer --toggle-mute
138
139 XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142 # playback control
143 XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146 # lock the screen
147 super + shift + q
148 light-locker-command -l
149
150 # Toggle keyboard layout
151 super + F7
152 toggle-layout
153
154 # Toggle Xfce presentation mode
155 XF86LaunchB
156 toggle-presentation-mode
157
158 # monitor brightness
159 XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162 super + apostrophe
163 rofi-light
164
165 # keyboard brightness
166 #XF86KbdBrightness{Up,Down}
167 # kbdlight {up,down}
168
169 XF86RotateWindows
170 toggle-tablet
171
172 #
173 # bspwm hotkeys
174 #
175
176 # quit bspwm normally
177 super + alt + Escape
178 bspc quit
179
180 # close and kill
181 super + {w,q}
182 bspc node -{c,k}
183
184 # alternate between the tiled and monocle layout
185 super + m
186 bspc desktop -l next
187
188 # send the newest marked node to the newest preselected node
189 super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192 # swap the current node and the biggest node
193 super + g
194 bspc node -s biggest
195
196 #
197 # state/flags
198 #
199
200 # set the window state
201 super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204 # set the node flags
205 super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208 #
209 # focus/swap
210 #
211
212 # focus the node in the given direction
213 super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216 # focus the node for the given path jump
217 super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220 # focus the next/previous node in the current desktop
221 super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224 # focus the next/previous desktop in the current monitor
225 super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228 # send to next/prev desktop
229 super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232 # focus the last node/desktop
233 super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236 # focus the older or newer node in the focus history
237 super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242 # focus or send to the given desktop
243 super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246 #
247 # preselect
248 #
249
250 # preselect the direction
251 super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254 # preselect the ratio
255 super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258 # cancel the preselection for the focused node
259 super + ctrl + space
260 bspc node -p cancel
261
262 # cancel the preselection for the focused desktop
263 super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266 #
267 # move/resize
268 #
269
270 # expand a window by moving one of its side outward
271 super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274 # contract a window by moving one of its side inward
275 super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278 # move a floating window
279 super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282 #alt + bracket{left,right}
283 # xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284 #+end_src
285
286 ** compton
287 :PROPERTIES:
288 :header-args+: :tangle ~/.config/compton.conf
289 :END:
290
291 #+begin_src conf :tangle no
292 # Shadow
293 shadow = false; # Enabled client-side shadows on windows.
294 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295 no-dnd-shadow = true; # Don't draw shadows on DND windows.
296 clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298 shadow-radius = 5; # The blur radius for shadows. (default 12)
299 shadow-offset-x = -5; # The left offset for shadows. (default -15)
300 shadow-offset-y = -5; # The top offset for shadows. (default -15)
301 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306 # shadow-exclude = "n:e:Notification";
307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311 # Opacity
312 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323 # blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326 # blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332 # Fading
333 fading = false; # Fade windows during opacity changes.
334 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338 fade-exclude = [ ]; # Exclude conditions for fading.
339
340 # Other
341 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355 dbe = false; # Enable DBE painting mode. Rarely needed.
356 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368 # GLX backend # GLX backend fine-tune options. See man page for more info.
369 glx-no-stencil = true; # Recommended.
370 glx-copy-from-front = false; # Useful with --glx-swap-method,
371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372 # glx-no-rebind-pixmap = true; # Recommended if it works.
373 glx-no-rebind-pixmap = true; # Recommended if it works.
374 #glx-swap-method = "4"; # See man page.
375 glx-swap-method = "4"; # See man page.
376
377 # Window type settings
378 wintypes:
379 {
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389 };
390 #+end_src
391
392 ** Dunst
393 :PROPERTIES:
394 :header-args+: :tangle ~/.config/dunst/dunstrc
395 :END:
396
397 #+begin_src conf
398 [global]
399 #font = Ubuntu Mono 10.5
400 font = Inconsolata 11
401
402 # Path to default icons.
403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405 icon_position = left
406 # <b>bold</b>
407 # <i>italic</i>
408 # <s>strikethrough<s/>
409 # <u>underline</u>
410 markup = full
411 # The format of the message. Possible variables are:
412 # %a appname
413 # %s summary
414 # %b body
415 # %i iconname (including its path)
416 # %I iconname (without its path)
417 # %p progress value if set ([ 0%] to [100%]) or nothing
418 # Markup is allowed
419 format = "<b>%s</b>\n%b"
420 # Sort messages by urgency
421 sort = yes
422 # Show how many messages are currently hidden (because of geometry)
423 indicate_hiddenl= no
424 # Alignment of message text.
425 # Possible values are "left", "center" and "right"
426 alignment = center
427 # The frequency with wich text that is longer than the notification
428 # window allows bounces back and forth.
429 # This option conflicts with 'word_wrap'.
430 # Set to 0 to disable
431 bounce_freq = 3
432 # show age of message if message is older than show_age_threshold seconds.
433 # set to -1 to disable
434 show_age_threshold = -1
435 # split notifications into multiple lines if they don't fit into geometry
436 word_wrap = yes
437 # ignore newlines '\n' in notifications
438 ignore_newline = no
439 # The geometry of the message window.
440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
441 # The height is measured in number of notifications everything else in pixels. If the width
442 # is omitted but the height is given ("-geometry x2"), the message window
443 # expands over the whole screen (dmenu-like). If width is 0,
444 # the window expands to the longest message displayed.
445 # A positive x is measured from the left, a negative from the
446 # right side of the screen. Y is measured from the top and down respectevly.
447 # The width can be negative. In this case the actual width is the
448 # screen width minus the width defined in within the geometry option.
449 #geometry = "410x12-12+12"
450 #geometry = "0x0-30-30"
451 geometry = "260x12-30-30"
452 # The transparency of the window. range: [0; 100]
453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454 transparency = 0
455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
456 # for longer than idle_threshold seconds.
457 # Set to 0 to disable.
458 idle_threshold = 120
459 # Which monitor should the notifications be displayed on.
460 monitor = 0
461 # Display notification on focused monitor. Possible modes are:
462 # mouse: follow mouse pointer
463 # keyboard: follow window with keyboard focus
464 # none: don't follow anything
465 #
466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467 # This should be the case for almost all modern windowmanagers.
468 #
469 # If this option is set to mouse or keyboard, the monitor option will be
470 # ignored.
471 follow = keyboard
472 # should a notification popped up from history be sticky or
473 # timeout as if it would normally do.
474 sticky_history = yes
475 # The height of a single line. If the height is smaller than the font height,
476 # it will get raised to the font height.
477 # This adds empty space above and under the text.
478 line_height = 0
479
480 show_indicators = yes
481
482 # Draw a line of 'separatpr_height' pixel height between two notifications.
483 # Set to 0 to disable
484 separator_height = 3
485 # padding between text and separator
486 padding = 8
487 # horizontal padding
488 horizontal_padding = 8
489 # Define a color for the separator.
490 # possible values are:
491 # * auto: dunst tries to find a color fitting to the background
492 # * foreground: use the same color as the foreground
493 # * frame: use the same color as the frame.
494 # * anything else will be interpreted as a X color
495 separator_color = foreground
496 # print a notification on startup
497 # This is mainly for error detection, since dbus (re-)starts dunst
498 # automatically after a crash.
499 startup_notification = false
500 # dmenu path
501 #dmenu = /usr/bin/dmenu -p dunst:
502 dmenu = /usr/bin/rofi -dmenu -p dunst:
503 # browser for opening urls in context menu
504 browser = /usr/bin/firefox -new-tab
505 [frame]
506 width = 0
507 color = "#377222"
508 [shortcuts]
509 # shortcuts are specified as [modifier+][modifier+]...key
510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511 # and 'mod4' (windows-key)
512 # xev might be helpful to find names for keys
513 # close notification
514 close = ctrl+space
515 # close all notifications
516 close_all = ctrl+shift+space
517 # redisplay last message(s)
518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519 history = ctrl+shift+h
520 # context menu
521 context = ctrl+shift+period
522 [urgency_low]
523 # IMPORTANT: colors have to be defined in quotation marks.
524 # Otherwise the '#' and following would be interpreted as a comment.
525 background = "#1d2a30"
526 foreground = "#71c2af"
527 timeout = 3
528 [urgency_normal]
529 background = "#1d2a30"
530 foreground = "#71c2af"
531 timeout = 0
532 [urgency_critical]
533 background = "#1d2a30"
534 foreground = "#ff9982"
535 timeout = 0
536
537 # Every section that isn't one of the above is interpreted as a rules
538 # to override settings for certain messages.
539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
541 # and 'format'.
542 # Shell-like globbing will get expanded.
543 #
544 # SCRIPTING
545 # you can specify a script that gets run when the rule matches by setting
546 # the 'script' option.
547 # The script will be called as follows:
548 # script appname summary body icon urgency
549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
550 #
551 # NOTE: if you don't want a notification to be displayed, set the format to ""
552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
553 # fitting options for rules.
554 #[espeak]
555 # summary = "*"
556 # script = dunst_espeak.sh
557 #[script-test]
558 # summary = "*script*"
559 # script = dunst_test.sh
560 #[ignore]
561 ## This notification will not be displayed
562 # summary = "foobar"
563 # format = ""
564 #[signed_on]
565 # appname = Pidgin
566 # summary = "*signed on*"
567 # urgency = low
568 #
569 #[signed_off]
570 # appname = Pidgin
571 # summary = *signed off*
572 # urgency = low
573 #
574 #[says]
575 # appname = Pidgin
576 # summary = *says*
577 # urgency = critical
578 #
579 #[twitter]
580 # appname = Pidgin
581 # summary = *twitter.com*
582 # urgency = normal
583 #
584 [xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587 #+end_src
588
589 ** Fontconfig
590 :PROPERTIES:
591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
592 :END:
593
594 #+begin_src xml
595 <?xml version="1.0"?>
596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597 <fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
628 <accept>
629 <family>Liberation Sans</family>
630 </accept>
631 </alias>
632 </fontconfig>
633 #+end_src
634
635 ** Git
636
637 *** gitconfig
638 :PROPERTIES:
639 :header-args+: :tangle ~/.gitconfig
640 :END:
641
642 **** user
643 #+begin_src conf
644 [user]
645 name = Amin Bandali
646 email = amin@aminb.org
647 signingkey = 4E05246AB0BF7FFB
648 #+end_src
649
650 **** signing
651 #+begin_src conf
652 [commit]
653 gpgsign = true
654 # [format]
655 # signoff = true
656 #+end_src
657
658 **** core
659 #+begin_src conf
660 [core]
661 autocrlf = input # CRLF -> LF on commit
662 editor = emacsclient -t
663 excludesfile = ~/.gitignore_global
664 pager = "less"
665 #+end_src
666
667 **** gpg
668 #+begin_src conf
669 [gpg]
670 program = gpg2
671 #+end_src
672
673 **** alias
674 #+begin_src conf
675 [alias]
676 git = !exec git # handle nested git calls, e.g. git git status
677 aliases = config --get-regexp '^alias\\.'
678 a = add
679 s = status
680 sl = status --long
681 c = checkout
682 cb = checkout -b
683 b = branch
684 r = rebase
685 p = pull
686 pr = pull --rebase
687 ps = push
688 psf = push --force
689 #+end_src
690
691 **** color
692 #+begin_src conf
693 [color]
694 ui = auto
695 [color "status"]
696 added = green bold
697 changed = red bold
698 untracked = red bold
699 [color "branch"]
700 current = green bold
701 remote = magenta bold
702 [color "diff"]
703 new = green bold
704 old = red bold
705 #+end_src
706
707 **** status
708 #+begin_src conf
709 [status]
710 # showUntrackedFiles = all
711 short=true
712 branch=true
713 #+end_src
714
715 **** github
716 #+begin_src conf
717 [github]
718 user = aminb
719 #+end_src
720
721 **** send-email
722 #+begin_src conf
723 [sendemail]
724 smtpuser = amin@aminb.org
725 smtpserver = nix.aminb.org
726 smtpserverport = 587
727 smtpencryption = tls
728 annotate = yes
729 #+end_src
730
731 *** gitignore
732 :PROPERTIES:
733 :header-args+: :tangle ~/.gitignore_global
734 :END:
735
736 #+begin_src conf
737 *.orig
738 *.py[co]
739 *.sublime-workspace
740 *~
741 .DS_Store
742 *.elc
743 *-autoloads.el
744 #+end_src
745
746 ** [[https://github.com/Leinnan/i3gs][i3gs]]
747 :PROPERTIES:
748 :header-args+: :tangle ~/.config/i3gs/config
749 :END:
750
751 #+begin_src conf :comments none
752 borders_width=0 0 2 0
753 separator_width=10
754
755 [mpd]
756 preset=MPD
757 title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
758 borders_color=#7FDBFF
759
760 [ram]
761 preset=RAM
762 title=<span weight='heavy' fgcolor='#3D9970'> </span>
763 borders_color=#3D9970
764
765 [cpu]
766 preset=CPU
767 title=<span weight='heavy' fgcolor='#2ECC40'> </span>
768 borders_color=#2ECC40
769
770 [hdd]
771 preset=HDD
772 title=<span weight='heavy' fgcolor='#01FF70'> </span>
773 borders_color=#01FF70
774
775 [battery]
776 preset=BAT
777 command=battery-percentage-time
778 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
779 borders_color=#39CCCC
780
781 [wifi]
782 preset=WIFI
783 title=<span weight='heavy' fgcolor='#01FF70'> </span>
784 borders_color=#01FF70
785
786 [date]
787 preset=DATE
788 command=date '+%-I:%M, %a %b %d'
789 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
790 borders_color=#FFDC00
791 separator_width=0
792 #+end_src
793 ** Latexmk
794 :PROPERTIES:
795 :header-args+: :tangle ~/.latexmkrc
796 :END:
797
798 #+begin_src conf
799 $pdf_previewer = "start zathura %O %S";
800 $clean_ext = "aux out";
801
802 # $pdf_update_method = 4;
803 # $pdf_update_command = "zathura %O %S";
804
805 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
806 # by Ctrl+click in the PDF.
807 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
808 # editor.
809 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
810 #+end_src
811
812 ** libinput
813
814 Improve XPS 15 9560's touchpad experience.
815
816 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
817 #+begin_src conf :tangle no
818 Section "InputClass"
819 Identifier "libinput touchpad catchall"
820 Driver "libinput"
821 MatchIsTouchpad "on"
822 Option "ClickMethod" "clickfinger"
823 Option "NaturalScrolling" "true"
824 Option "Tapping" "on"
825 Option "TappingButtonMap" "lrm"
826 EndSection
827 #+end_src
828
829 ** getmail
830
831 *** getmailrc
832 :PROPERTIES:
833 :header-args+: :tangle ~/.getmail/getmailrc
834 :END:
835
836 #+begin_src conf
837 [retriever]
838 type = SimplePOP3SSLRetriever
839 server = fencepost.gnu.org
840 username = aminb
841 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
842 port = 995
843 use_apop = True
844
845 [destination]
846 type = Maildir
847 path = ~/mail/gnu/Inbox/
848
849 [options]
850 delete = True
851 #+end_src
852
853 *** getmail.service
854 :PROPERTIES:
855 :header-args+: :tangle ~/.config/systemd/user/getmail.service
856 :END:
857
858 #+begin_src conf :tangle no
859 [Unit]
860 Description=getmail service
861
862 [Service]
863 Type=oneshot
864 ExecStart=/usr/bin/getmail
865 StandardOutput=syslog
866 StandardError=syslog
867 #+end_src
868
869 *** getmail.timer
870 :PROPERTIES:
871 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
872 :END:
873
874 #+begin_src conf :tangle no
875 [Unit]
876 Description=getmail timer
877
878 [Timer]
879 OnCalendar=*:0/30
880 Persistent=true
881 Unit=getmail.service
882
883 [Install]
884 WantedBy=timers.target
885 #+end_src
886
887 ** GnuPG
888 :PROPERTIES:
889 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
890 :END:
891
892 #+begin_src conf
893 default-cache-ttl 43200
894 max-cache-ttl 43200
895
896 default-cache-ttl-ssh 10800
897 max-cache-ttl-ssh 10800
898
899 # pinentry-program /usr/bin/pinentry-qt
900 #+end_src
901
902 ** GTK
903
904 *** gtk-2.0
905 :PROPERTIES:
906 :header-args+: :tangle ~/.gtkrc-2.0
907 :END:
908
909 #+begin_src conf
910 gtk-theme-name="Greybird"
911 gtk-icon-theme-name="Paper"
912 gtk-font-name="Ubuntu 10"
913 gtk-menu-images=0
914 # gtk-key-theme-name = "Emacs"
915 #+end_src
916
917 *** gtk-3.0
918 :PROPERTIES:
919 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
920 :END:
921
922 #+begin_src conf :tangle no
923 [Settings]
924 gtk-icon-theme-name = Paper
925 # gtk-theme-name = Adwaita
926
927 gtk-theme-name = Greybird
928 # gtk-theme-name = Arc-Darker
929 # gtk-theme-name = Numix-ArchBlue
930
931 gtk-font-name = Ubuntu 10
932 # gtk-key-theme-name = Emacs
933 #+end_src
934
935 ** isync
936
937 *** mbsyncrc
938 :PROPERTIES:
939 :header-args+: :tangle ~/.mbsyncrc
940 :END:
941
942 #+begin_src conf
943 # Global defaults
944 CopyArrivalDate yes
945
946 ######
947 IMAPAccount amin
948 Host nix.aminb.org
949 User amin@aminb.org
950 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
951 SSLType IMAPS
952
953 IMAPStore amin-remote
954 Account amin
955
956 MaildirStore amin-local
957 Path ~/mail/amin/
958 Inbox ~/mail/amin/Inbox
959 SubFolders Verbatim
960
961 Channel amin
962 Master :amin-remote:
963 Slave :amin-local:
964 Patterns * !dovecot*
965 Create Both
966 SyncState *
967
968 ######
969 IMAPAccount uwaterloo
970 Host connect.uwaterloo.ca
971 User abandali
972 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
973 SSLType IMAPS
974
975 IMAPStore uwaterloo-remote
976 Account uwaterloo
977
978 MaildirStore uwaterloo-local
979 Path ~/mail/uwaterloo/
980 Inbox ~/mail/uwaterloo/Inbox
981 SubFolders Verbatim
982
983 Channel uwaterloo
984 Master :uwaterloo-remote:
985 Slave :uwaterloo-local:
986 Patterns * !dovecot*
987 Create Both
988 SyncState *
989 #+end_src
990
991 *** mbsync.service
992 :PROPERTIES:
993 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
994 :END:
995
996 #+begin_src conf :tangle no
997 [Unit]
998 Description=mbsync service
999
1000 [Service]
1001 Type=oneshot
1002 ExecStart=/usr/bin/mbsync -Va
1003 StandardOutput=syslog
1004 StandardError=syslog
1005 #+end_src
1006
1007 *** mbsync.timer
1008 :PROPERTIES:
1009 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1010 :END:
1011
1012 #+begin_src conf :tangle no
1013 [Unit]
1014 Description=mbsync timer
1015
1016 [Timer]
1017 OnCalendar=*:0/15
1018 Persistent=true
1019 Unit=mbsync.service
1020
1021 [Install]
1022 WantedBy=timers.target
1023 #+end_src
1024
1025 ** mpd
1026 :PROPERTIES:
1027 :header-args+: :tangle ~/.config/mpd/mpd.conf
1028 :END:
1029
1030 #+begin_src conf
1031 # An example configuration file for MPD.
1032 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1033
1034
1035 # Files and directories #######################################################
1036 #
1037 # This setting controls the top directory which MPD will search to discover the
1038 # available audio files and add them to the daemon's online database. This
1039 # setting defaults to the XDG directory, otherwise the music directory will be
1040 # be disabled and audio files will only be accepted over ipc socket (using
1041 # file:// protocol) or streaming files over an accepted protocol.
1042 #
1043 music_directory "~/usr/music"
1044 #
1045 # This setting sets the MPD internal playlist directory. The purpose of this
1046 # directory is storage for playlists created by MPD. The server will use
1047 # playlist files not created by the server but only if they are in the MPD
1048 # format. This setting defaults to playlist saving being disabled.
1049 #
1050 playlist_directory "~/.mpd/playlists"
1051 #
1052 # This setting sets the location of the MPD database. This file is used to
1053 # load the database at server start up and store the database while the
1054 # server is not up. This setting defaults to disabled which will allow
1055 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1056 # files over an accepted protocol.
1057 #
1058 db_file "~/.mpd/database"
1059 #
1060 # These settings are the locations for the daemon log files for the daemon.
1061 # These logs are great for troubleshooting, depending on your log_level
1062 # settings.
1063 #
1064 # The special value "syslog" makes MPD use the local syslog daemon. This
1065 # setting defaults to logging to syslog, otherwise logging is disabled.
1066 #
1067 log_file "~/.mpd/log"
1068 #
1069 # This setting sets the location of the file which stores the process ID
1070 # for use of mpd --kill and some init scripts. This setting is disabled by
1071 # default and the pid file will not be stored.
1072 #
1073 pid_file "~/.mpd/pid"
1074 #
1075 # This setting sets the location of the file which contains information about
1076 # most variables to get MPD back into the same general shape it was in before
1077 # it was brought down. This setting is disabled by default and the server
1078 # state will be reset on server start up.
1079 #
1080 state_file "~/.mpd/state"
1081 #
1082 # The location of the sticker database. This is a database which
1083 # manages dynamic information attached to songs.
1084 #
1085 sticker_file "~/.mpd/sticker.sql"
1086 #
1087 ###############################################################################
1088
1089
1090 # General music daemon options ################################################
1091 #
1092 # This setting specifies the user that MPD will run as. MPD should never run as
1093 # root and you may use this setting to make MPD change its user ID after
1094 # initialization. This setting is disabled by default and MPD is run as the
1095 # current user.
1096 #
1097 #user "nobody"
1098 #
1099 # This setting specifies the group that MPD will run as. If not specified
1100 # primary group of user specified with "user" setting will be used (if set).
1101 # This is useful if MPD needs to be a member of group such as "audio" to
1102 # have permission to use sound card.
1103 #
1104 #group "nogroup"
1105 #
1106 # This setting sets the address for the daemon to listen on. Careful attention
1107 # should be paid if this is assigned to anything other then the default, any.
1108 # This setting can deny access to control of the daemon. Not effective if
1109 # systemd socket activiation is in use.
1110 #
1111 # For network
1112 #bind_to_address "any"
1113 #
1114 # And for Unix Socket
1115 #bind_to_address "~/.mpd/socket"
1116 #
1117 # This setting is the TCP port that is desired for the daemon to get assigned
1118 # to.
1119 #
1120 #port "6600"
1121 #
1122 # This setting controls the type of information which is logged. Available
1123 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1124 # argument is recommended for troubleshooting, though can quickly stretch
1125 # available resources on limited hardware storage.
1126 #
1127 #log_level "default"
1128 #
1129 # If you have a problem with your MP3s ending abruptly it is recommended that
1130 # you set this argument to "no" to attempt to fix the problem. If this solves
1131 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1132 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1133 # point gapless MP3 playback can be enabled.
1134 #
1135 #gapless_mp3_playback "yes"
1136 #
1137 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1138 # of starting playback after startup.
1139 #
1140 #restore_paused "no"
1141 #
1142 # This setting enables MPD to create playlists in a format usable by other
1143 # music players.
1144 #
1145 #save_absolute_paths_in_playlists "no"
1146 #
1147 # This setting defines a list of tag types that will be extracted during the
1148 # audio file discovery process. The complete list of possible values can be
1149 # found in the user manual.
1150 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1151 #
1152 # This setting enables automatic update of MPD's database when files in
1153 # music_directory are changed.
1154 #
1155 #auto_update "yes"
1156 #
1157 # Limit the depth of the directories being watched, 0 means only watch
1158 # the music directory itself. There is no limit by default.
1159 #
1160 #auto_update_depth "3"
1161 #
1162 ###############################################################################
1163
1164
1165 # Symbolic link behavior ######################################################
1166 #
1167 # If this setting is set to "yes", MPD will discover audio files by following
1168 # symbolic links outside of the configured music_directory.
1169 #
1170 #follow_outside_symlinks "yes"
1171 #
1172 # If this setting is set to "yes", MPD will discover audio files by following
1173 # symbolic links inside of the configured music_directory.
1174 #
1175 #follow_inside_symlinks "yes"
1176 #
1177 ###############################################################################
1178
1179
1180 # Zeroconf / Avahi Service Discovery ##########################################
1181 #
1182 # If this setting is set to "yes", service information will be published with
1183 # Zeroconf / Avahi.
1184 #
1185 #zeroconf_enabled "yes"
1186 #
1187 # The argument to this setting will be the Zeroconf / Avahi unique name for
1188 # this MPD server on the network.
1189 #
1190 #zeroconf_name "Music Player"
1191 #
1192 ###############################################################################
1193
1194
1195 # Permissions #################################################################
1196 #
1197 # If this setting is set, MPD will require password authorization. The password
1198 # setting can be specified multiple times for different password profiles.
1199 #
1200 #password "password@read,add,control,admin"
1201 #
1202 # This setting specifies the permissions a user has who has not yet logged in.
1203 #
1204 #default_permissions "read,add,control,admin"
1205 #
1206 ###############################################################################
1207
1208
1209 # Database #######################################################################
1210 #
1211
1212 #database {
1213 # plugin "proxy"
1214 # host "other.mpd.host"
1215 # port "6600"
1216 #}
1217
1218 # Input #######################################################################
1219 #
1220
1221 input {
1222 plugin "curl"
1223 # proxy "proxy.isp.com:8080"
1224 # proxy_user "user"
1225 # proxy_password "password"
1226 }
1227
1228 #
1229 ###############################################################################
1230
1231 # Audio Output ################################################################
1232 #
1233
1234 audio_output {
1235 type "pulse"
1236 name "pulse audio"
1237 }
1238
1239 audio_output {
1240 type "fifo"
1241 name "my_fifo"
1242 path "/tmp/mpd.fifo"
1243 format "44100:16:2"
1244 }
1245
1246 # MPD supports various audio output types, as well as playing through multiple
1247 # audio outputs at the same time, through multiple audio_output settings
1248 # blocks. Setting this block is optional, though the server will only attempt
1249 # autodetection for one sound card.
1250 #
1251 # An example of an ALSA output:
1252 #
1253 #audio_output {
1254 # type "alsa"
1255 # name "My ALSA Device"
1256 ## device "hw:0,0" # optional
1257 ## mixer_type "hardware" # optional
1258 ## mixer_device "default" # optional
1259 ## mixer_control "PCM" # optional
1260 ## mixer_index "0" # optional
1261 #}
1262 #
1263 # An example of an OSS output:
1264 #
1265 #audio_output {
1266 # type "oss"
1267 # name "My OSS Device"
1268 ## device "/dev/dsp" # optional
1269 ## mixer_type "hardware" # optional
1270 ## mixer_device "/dev/mixer" # optional
1271 ## mixer_control "PCM" # optional
1272 #}
1273 #
1274 # An example of a shout output (for streaming to Icecast):
1275 #
1276 #audio_output {
1277 # type "shout"
1278 # encoder "vorbis" # optional
1279 # name "My Shout Stream"
1280 # host "localhost"
1281 # port "8000"
1282 # mount "/mpd.ogg"
1283 # password "hackme"
1284 # quality "5.0"
1285 # bitrate "128"
1286 # format "44100:16:1"
1287 ## protocol "icecast2" # optional
1288 ## user "source" # optional
1289 ## description "My Stream Description" # optional
1290 ## url "http://example.com" # optional
1291 ## genre "jazz" # optional
1292 ## public "no" # optional
1293 ## timeout "2" # optional
1294 ## mixer_type "software" # optional
1295 #}
1296 #
1297 # An example of a recorder output:
1298 #
1299 #audio_output {
1300 # type "recorder"
1301 # name "My recorder"
1302 # encoder "vorbis" # optional, vorbis or lame
1303 # path "/var/lib/mpd/recorder/mpd.ogg"
1304 ## quality "5.0" # do not define if bitrate is defined
1305 # bitrate "128" # do not define if quality is defined
1306 # format "44100:16:1"
1307 #}
1308 #
1309 # An example of a httpd output (built-in HTTP streaming server):
1310 #
1311 #audio_output {
1312 # type "httpd"
1313 # name "My HTTP Stream"
1314 # encoder "vorbis" # optional, vorbis or lame
1315 # port "8000"
1316 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1317 ## quality "5.0" # do not define if bitrate is defined
1318 # bitrate "128" # do not define if quality is defined
1319 # format "44100:16:1"
1320 # max_clients "0" # optional 0=no limit
1321 #}
1322 #
1323 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1324 #
1325 #audio_output {
1326 # type "pulse"
1327 # name "My Pulse Output"
1328 ## server "remote_server" # optional
1329 ## sink "remote_server_sink" # optional
1330 #}
1331 #
1332 # An example of a winmm output (Windows multimedia API).
1333 #
1334 #audio_output {
1335 # type "winmm"
1336 # name "My WinMM output"
1337 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1338 # or
1339 ## device "0" # optional
1340 ## mixer_type "hardware" # optional
1341 #}
1342 #
1343 # An example of an openal output.
1344 #
1345 #audio_output {
1346 # type "openal"
1347 # name "My OpenAL output"
1348 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1349 #}
1350 #
1351 # An example of an sndio output.
1352 #
1353 #audio_output {
1354 # type "sndio"
1355 # name "sndio output"
1356 # mixer_type "software"
1357 #}
1358 #
1359 # An example of an OS X output:
1360 #
1361 #audio_output {
1362 # type "osx"
1363 # name "My OS X Device"
1364 ## device "Built-in Output" # optional
1365 ## channel_map "-1,-1,0,1" # optional
1366 #}
1367 #
1368 ## Example "pipe" output:
1369 #
1370 #audio_output {
1371 # type "pipe"
1372 # name "my pipe"
1373 # command "aplay -f cd 2>/dev/null"
1374 ## Or if you're want to use AudioCompress
1375 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1376 ## Or to send raw PCM stream through PCM:
1377 # command "nc example.org 8765"
1378 # format "44100:16:2"
1379 #}
1380 #
1381 ## An example of a null output (for no audio output):
1382 #
1383 #audio_output {
1384 # type "null"
1385 # name "My Null Output"
1386 # mixer_type "none" # optional
1387 #}
1388 #
1389 ###############################################################################
1390
1391
1392 # Normalization automatic volume adjustments ##################################
1393 #
1394 # This setting specifies the type of ReplayGain to use. This setting can have
1395 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1396 # chooses between "track" and "album" depending on the current state of
1397 # random playback. If random playback is enabled then "track" mode is used.
1398 # See <http://www.replaygain.org> for more details about ReplayGain.
1399 # This setting is off by default.
1400 #
1401 #replaygain "album"
1402 #
1403 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1404 # default this setting is disabled.
1405 #
1406 #replaygain_preamp "0"
1407 #
1408 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1409 # By default this setting is disabled.
1410 #
1411 #replaygain_missing_preamp "0"
1412 #
1413 # This setting enables or disables ReplayGain limiting.
1414 # MPD calculates actual amplification based on the ReplayGain tags
1415 # and replaygain_preamp / replaygain_missing_preamp setting.
1416 # If replaygain_limit is enabled MPD will never amplify audio signal
1417 # above its original level. If replaygain_limit is disabled such amplification
1418 # might occur. By default this setting is enabled.
1419 #
1420 #replaygain_limit "yes"
1421 #
1422 # This setting enables on-the-fly normalization volume adjustment. This will
1423 # result in the volume of all playing audio to be adjusted so the output has
1424 # equal "loudness". This setting is disabled by default.
1425 #
1426 #volume_normalization "no"
1427 #
1428 ###############################################################################
1429
1430 # Character Encoding ##########################################################
1431 #
1432 # If file or directory names do not display correctly for your locale then you
1433 # may need to modify this setting.
1434 #
1435 #filesystem_charset "UTF-8"
1436 #
1437 ###############################################################################
1438 #+end_src
1439
1440 ** msmtp
1441 :PROPERTIES:
1442 :header-args+: :tangle ~/.msmtprc
1443 :END:
1444
1445 #+begin_src conf
1446 # Set default values for all following accounts.
1447 defaults
1448 port 587
1449 tls on
1450 auth on
1451 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1452 logfile ~/.msmtp.log
1453
1454 # aminb
1455 account aminb
1456 host nix.aminb.org
1457 tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1458 tls_starttls on
1459 from amin@aminb.org
1460 user amin@aminb.org
1461 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1462
1463 # gnu
1464 account gnu
1465 host fencepost.gnu.org
1466 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1467 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1468 tls_starttls on
1469 from aminb@gnu.org
1470 user aminb
1471 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1472
1473 # uwaterloo
1474 account uwaterloo
1475 host connect.uwaterloo.ca
1476 tls_starttls on
1477 from abandali@uwaterloo.ca
1478 user abandali
1479 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1480 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1481
1482 # uwaterloo (friendly address)
1483 account uwaterloo-friendly : uwaterloo
1484 from amin.bandali@uwaterloo.ca
1485
1486 # Set a default account
1487 account default : aminb
1488 #+end_src
1489
1490 ** ncmpcpp
1491
1492 *** config
1493 :PROPERTIES:
1494 :header-args+: :tangle ~/.ncmpcpp/config
1495 :END:
1496
1497 #+begin_src conf :tangle no
1498 ##############################################################
1499 ## This is the example configuration file. Copy it to ##
1500 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1501 ## and set up your preferences. ##
1502 ##############################################################
1503 #
1504 ##### directories ######
1505 ##
1506 ## Directory for storing ncmpcpp related files.
1507 ## Changing it is useful if you want to store
1508 ## everything somewhere else and provide command
1509 ## line setting for alternative location to config
1510 ## file which defines that while launching ncmpcpp.
1511 ##
1512 #
1513 ncmpcpp_directory = ~/.ncmpcpp
1514 #
1515 ##
1516 ## Directory for storing downloaded lyrics. It
1517 ## defaults to ~/.lyrics since other MPD clients
1518 ## (eg. ncmpc) also use that location.
1519 ##
1520 #
1521 #lyrics_directory = ~/.lyrics
1522 #
1523 ##### connection settings #####
1524 #
1525 #mpd_host = localhost
1526 #
1527 #mpd_port = 6600
1528 #
1529 #mpd_connection_timeout = 5
1530 #
1531 ## Needed for tag editor and file operations to work.
1532 ##
1533 mpd_music_dir = ~/usr/music
1534 #
1535 #mpd_crossfade_time = 5
1536 #
1537 ##### music visualizer #####
1538 ##
1539 ## Note: In order to make music visualizer work you'll
1540 ## need to use mpd fifo output, whose format parameter
1541 ## has to be set to 44100:16:1 for mono visualization
1542 ## or 44100:16:2 for stereo visualization. Example
1543 ## configuration (it has to be put into mpd.conf):
1544 ##
1545 ## audio_output {
1546 ## type "fifo"
1547 ## name "Visualizer feed"
1548 ## path "/tmp/mpd.fifo"
1549 ## format "44100:16:2"
1550 ## }
1551 ##
1552 #
1553 visualizer_fifo_path = /tmp/mpd.fifo
1554 #
1555 ##
1556 ## Note: Below parameter is needed for ncmpcpp
1557 ## to determine which output provides data for
1558 ## visualizer and thus allow syncing between
1559 ## visualization and sound as currently there
1560 ## are some problems with it.
1561 ##
1562 #
1563 visualizer_output_name = my fifo
1564 #
1565 ##
1566 ## If you set format to 44100:16:2, make it 'yes'.
1567 ##
1568 visualizer_in_stereo = yes
1569 #
1570 ##
1571 ## Multiply received samples by given value. Very
1572 ## useful for proper visualization of quiet music.
1573 ##
1574 #visualizer_sample_multiplier = 1
1575 #
1576 ##
1577 ## Note: Below parameter defines how often ncmpcpp
1578 ## has to "synchronize" visualizer and audio outputs.
1579 ## 30 seconds is optimal value, but if you experience
1580 ## synchronization problems, set it to lower value.
1581 ## Keep in mind that sane values start with >=10.
1582 ##
1583 #
1584 visualizer_sync_interval = 30
1585 #
1586 ##
1587 ## Note: To enable spectrum frequency visualization
1588 ## you need to compile ncmpcpp with fftw3 support.
1589 ##
1590 #
1591 ## Available values: spectrum, wave, wave_filled, ellipse.
1592 ##
1593 visualizer_type = spectrum
1594 #
1595 #visualizer_look = ●▮
1596 visualizer_look = "●•"
1597 #
1598 #visualizer_color = blue, cyan, green, yellow, magenta, red
1599 #
1600 ## Alternative subset of 256 colors for terminals that support it.
1601 ##
1602 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1603 #
1604 ##### system encoding #####
1605 ##
1606 ## ncmpcpp should detect your charset encoding
1607 ## but if it failed to do so, you can specify
1608 ## charset encoding you are using here.
1609 ##
1610 ## Note: You can see whether your ncmpcpp build
1611 ## supports charset detection by checking output
1612 ## of `ncmpcpp --version`.
1613 ##
1614 ## Note: Since MPD uses UTF-8 by default, setting
1615 ## this option makes sense only if your encoding
1616 ## is different.
1617 ##
1618 #
1619 #system_encoding = ""
1620 #
1621 ##### delays #####
1622 #
1623 ## Time of inactivity (in seconds) after playlist
1624 ## highlighting will be disabled (0 = always on).
1625 ##
1626 #playlist_disable_highlight_delay = 5
1627 #
1628 ## Defines how long messages are supposed to be visible.
1629 ##
1630 #message_delay_time = 5
1631 #
1632 ##### song format #####
1633 ##
1634 ## For a song format you can use:
1635 ##
1636 ## %l - length
1637 ## %f - filename
1638 ## %D - directory
1639 ## %a - artist
1640 ## %A - album artist
1641 ## %t - title
1642 ## %b - album
1643 ## %y - date
1644 ## %n - track number (01/12 -> 01)
1645 ## %N - full track info (01/12 -> 01/12)
1646 ## %g - genre
1647 ## %c - composer
1648 ## %p - performer
1649 ## %d - disc
1650 ## %C - comment
1651 ## %P - priority
1652 ## $R - begin right alignment
1653 ##
1654 ## If you want to make sure that a part of the format is displayed
1655 ## only when certain tags are present, you can archieve it by
1656 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1657 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1658 ## It is also possible to define a list of alternatives by providing
1659 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1660 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1661 ## present.
1662 ##
1663 ## Note: If you want to set limit on maximal length of a tag, just
1664 ## put the appropriate number between % and character that defines
1665 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1666 ##
1667 ## In addition, formats support markers used for text attributes.
1668 ## They are followed by character '$'. After that you can put:
1669 ##
1670 ## - 0 - default window color (discards all other colors)
1671 ## - 1 - black
1672 ## - 2 - red
1673 ## - 3 - green
1674 ## - 4 - yellow
1675 ## - 5 - blue
1676 ## - 6 - magenta
1677 ## - 7 - cyan
1678 ## - 8 - white
1679 ## - 9 - end of current color
1680 ## - b - bold text
1681 ## - u - underline text
1682 ## - r - reverse colors
1683 ## - a - use alternative character set
1684 ##
1685 ## If you don't want to use a non-color attribute anymore, just put it
1686 ## again, but this time insert character '/' between '$' and attribute
1687 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1688 ## or filename with reversed colors.
1689 ##
1690 ## If you want to use 256 colors and/or background colors in formats
1691 ## (the naming scheme is described below in section about color
1692 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1693 ## the artist tag to one of the non-standard colors and make it have
1694 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1695 ## that for standard colors this is interchangable with attributes
1696 ## listed above.
1697 ##
1698 ## Note: colors can be nested.
1699 ##
1700 #
1701 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1702 #
1703 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1704 #
1705 #song_library_format = {%n - }{%t}|{%f}
1706 #
1707 #
1708 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1709 #
1710 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1711 #
1712 #now_playing_prefix = $b
1713 #
1714 #now_playing_suffix = $/b
1715 #
1716 #browser_playlist_prefix = "$2playlist$9 "
1717 #
1718 #selected_item_prefix = $6
1719 #
1720 #selected_item_suffix = $9
1721 #
1722 #modified_item_prefix = $3> $9
1723 #
1724 ##
1725 ## Note: attributes are not supported for the following variables.
1726 ##
1727 #song_window_title_format = {%a - }{%t}|{%f}
1728 ##
1729 ## Note: Below variables are used for sorting songs in browser.
1730 ## The sort mode determines how songs are sorted, and can be used
1731 ## in combination with a sort format to specify a custom sorting format.
1732 ## Available values for browser_sort_mode are "name", "mtime", "format"
1733 ## and "noop".
1734 ##
1735 #
1736 #browser_sort_mode = name
1737 #
1738 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1739 #
1740 ##### columns settings #####
1741 ##
1742 ## syntax of song columns list format is "column column etc."
1743 ##
1744 ## - syntax for each column is:
1745 ##
1746 ## (width of the column)[color of the column]{displayed tag}
1747 ##
1748 ## Note: Width is by default in %, if you want a column to
1749 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1750 ## will be the column that take 10% of screen (so the real width
1751 ## will depend on actual screen size), whereas (10f)[white]{a}
1752 ## will take 10 terminal cells, no matter how wide the screen is.
1753 ##
1754 ## - color is optional (if you want the default one,
1755 ## leave the field empty).
1756 ##
1757 ## Note: You can give a column additional attributes by putting appropriate
1758 ## character after displayed tag character. Available attributes are:
1759 ##
1760 ## - r - column will be right aligned
1761 ## - E - if tag is empty, empty tag marker won't be displayed
1762 ##
1763 ## You can also:
1764 ##
1765 ## - give a column custom name by putting it after attributes,
1766 ## separated with character ':', e.g. {lr:Length} gives you
1767 ## right aligned column of lengths named "Length".
1768 ##
1769 ## - define sequence of tags, that have to be displayed in case
1770 ## predecessor is empty in a way similar to the one in classic
1771 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1772 ## creates column named "Owner" that tries to display artist
1773 ## tag and then composer and performer if previous ones are
1774 ## not available.
1775 ##
1776 #
1777 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1778 #
1779 ##### various settings #####
1780 #
1781 ##
1782 ## Note: Custom command that will be executed each
1783 ## time song changes. Useful for notifications etc.
1784 ##
1785 #execute_on_song_change = ""
1786 #
1787 #playlist_show_mpd_host = no
1788 #
1789 #playlist_show_remaining_time = no
1790 #
1791 #playlist_shorten_total_times = no
1792 #
1793 #playlist_separate_albums = no
1794 #
1795 ##
1796 ## Note: Possible display modes: classic, columns.
1797 ##
1798 #playlist_display_mode = columns
1799 #
1800 #browser_display_mode = classic
1801 #
1802 #search_engine_display_mode = classic
1803 #
1804 #playlist_editor_display_mode = classic
1805 #
1806 #discard_colors_if_item_is_selected = yes
1807 #
1808 #incremental_seeking = yes
1809 #
1810 #seek_time = 1
1811 #
1812 #volume_change_step = 2
1813 #
1814 #autocenter_mode = no
1815 #
1816 #centered_cursor = no
1817 #
1818 ##
1819 ## Note: You can specify third character which will
1820 ## be used to build 'empty' part of progressbar.
1821 ##
1822 #progressbar_look = =>
1823 progressbar_look = "─╼╶"
1824 #progressbar_look = "─⊙╶"
1825 #
1826 #progressbar_boldness = yes
1827 #
1828 ## Available values: database, playlist.
1829 ##
1830 #default_place_to_search_in = database
1831 #
1832 ## Available values: classic, alternative.
1833 ##
1834 #user_interface = classic
1835 #
1836 #data_fetching_delay = yes
1837 #
1838 ## Available values: artist, album_artist, date, genre, composer, performer.
1839 ##
1840 #media_library_primary_tag = artist
1841 #
1842 ## Available values: wrapped, normal.
1843 ##
1844 #default_find_mode = wrapped
1845 #
1846 #default_tag_editor_pattern = %n - %t
1847 #
1848 #header_visibility = yes
1849 #
1850 #statusbar_visibility = yes
1851 #
1852 #titles_visibility = yes
1853 #
1854 #header_text_scrolling = yes
1855 #
1856 #cyclic_scrolling = no
1857 #
1858 #lines_scrolled = 2
1859 #
1860 #follow_now_playing_lyrics = no
1861 #
1862 #fetch_lyrics_for_current_song_in_background = no
1863 #
1864 #store_lyrics_in_song_dir = no
1865 #
1866 #generate_win32_compatible_filenames = yes
1867 #
1868 #allow_for_physical_item_deletion = no
1869 #
1870 ##
1871 ## Note: If you set this variable, ncmpcpp will try to
1872 ## get info from last.fm in language you set and if it
1873 ## fails, it will fall back to english. Otherwise it will
1874 ## use english the first time.
1875 ##
1876 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1877 ##
1878 #lastfm_preferred_language = en
1879 #
1880 #show_hidden_files_in_local_browser = no
1881 #
1882 ##
1883 ## How shall screen switcher work?
1884 ##
1885 ## - "previous" - switch between the current and previous screen.
1886 ## - "screen1,...,screenN" - switch between given sequence of screens.
1887 ##
1888 ## Screens available for use: help, playlist, browser, search_engine,
1889 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1890 ##
1891 #screen_switcher_mode = playlist, browser
1892 #
1893 ##
1894 ## Note: You can define startup screen
1895 ## by choosing screen from the list above.
1896 ##
1897 #startup_screen = playlist
1898 #
1899 ##
1900 ## Note: You can define startup slave screen
1901 ## by choosing screen from the list above or
1902 ## an empty value for no slave screen.
1903 ##
1904 #startup_slave_screen = ""
1905 #
1906 #startup_slave_screen_focus = no
1907 #
1908 ##
1909 ## Default width of locked screen (in %).
1910 ## Acceptable values are from 20 to 80.
1911 ##
1912 #
1913 #locked_screen_width_part = 50
1914 #
1915 #ask_for_locked_screen_width_part = yes
1916 #
1917 #jump_to_now_playing_song_at_start = yes
1918 #
1919 #ask_before_clearing_playlists = yes
1920 #
1921 #clock_display_seconds = no
1922 #
1923 #display_volume_level = yes
1924 #
1925 #display_bitrate = no
1926 #
1927 #display_remaining_time = no
1928 #
1929 ## Available values: none, basic, extended, perl.
1930 ##
1931 #regular_expressions = perl
1932 #
1933 ##
1934 ## Note: If below is enabled, ncmpcpp will ignore leading
1935 ## "The" word while sorting items in browser, tags in
1936 ## media library, etc.
1937 ##
1938 #ignore_leading_the = no
1939 #
1940 #block_search_constraints_change_if_items_found = yes
1941 #
1942 #mouse_support = yes
1943 #
1944 #mouse_list_scroll_whole_page = yes
1945 #
1946 #empty_tag_marker = <empty>
1947 #
1948 #tags_separator = " | "
1949 #
1950 #tag_editor_extended_numeration = no
1951 #
1952 #media_library_sort_by_mtime = no
1953 #
1954 #enable_window_title = yes
1955 #
1956 ##
1957 ## Note: You can choose default search mode for search
1958 ## engine. Available modes are:
1959 ##
1960 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1961 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1962 ## but if your mpd is on a remote machine, downloading big database
1963 ## to process it can take a while
1964 ## - 3 - match only exact values (this mode uses mpd function for searching
1965 ## in database and local one for searching in current playlist)
1966 ##
1967 #
1968 #search_engine_default_search_mode = 1
1969 #
1970 #external_editor = nano
1971 #
1972 ## Note: set to yes if external editor is a console application.
1973 ##
1974 #use_console_editor = yes
1975 #
1976 ##### colors definitions #####
1977 ##
1978 ## It is possible to set a background color by setting a color
1979 ## value "<foreground>_<background>", e.g. red_black will set
1980 ## foregound color to red and background color to black.
1981 ##
1982 ## In addition, for terminals that support 256 colors it
1983 ## is possible to set one of them by using a number in range
1984 ## [1, 256] instead of color name, e.g. numerical value
1985 ## corresponding to red_black is 2_1. To find out if the
1986 ## terminal supports 256 colors, run ncmpcpp and check out
1987 ## the bottom of the help screen for list of available colors
1988 ## and their numerical values.
1989 ##
1990 ## Note: due to technical limitations of ncurses, if 256 colors
1991 ## are used, it is possible to either use only the colors with
1992 ## default background color, or all pairs from 1_1 up to 254_127,
1993 ## depending on the ncurses version used.
1994 ##
1995 #
1996 #colors_enabled = yes
1997 #
1998 #empty_tag_color = cyan
1999 #
2000 #header_window_color = default
2001 #
2002 #volume_color = default
2003 #
2004 #state_line_color = default
2005 #
2006 #state_flags_color = default
2007 #
2008 #main_window_color = yellow
2009 #
2010 #color1 = white
2011 #
2012 #color2 = green
2013 #
2014 #main_window_highlight_color = yellow
2015 #
2016 #progressbar_color = black
2017 #
2018 #progressbar_elapsed_color = green
2019 #
2020 #statusbar_color = default
2021 #
2022 #alternative_ui_separator_color = black
2023 #
2024 #active_column_color = red
2025 #
2026 #window_border_color = green
2027 #
2028 #active_window_border = red
2029 #
2030 #+end_src
2031
2032 *** bindings
2033 :PROPERTIES:
2034 :header-args+: :tangle ~/.ncmpcpp/bindings
2035 :END:
2036
2037 #+begin_src conf :tangle no
2038 def_key "j"
2039 scroll_down
2040 def_key "k"
2041 scroll_up
2042
2043 def_key "ctrl-u"
2044 page_up
2045 def_key "ctrl-d"
2046 page_down
2047
2048 def_key "h"
2049 previous_column
2050 def_key "l"
2051 next_column
2052
2053 def_key "."
2054 show_lyrics
2055
2056 def_key "n"
2057 next_found_item
2058 def_key "N"
2059 previous_found_item
2060
2061 def_key "J"
2062 move_sort_order_down
2063 def_key "K"
2064 move_sort_order_up
2065 #+end_src
2066
2067 ** notmuch
2068
2069 *** notmuch-config
2070 :PROPERTIES:
2071 :header-args+: :tangle ~/.notmuch-config
2072 :END:
2073
2074 #+begin_src conf
2075 # .notmuch-config - Configuration file for the notmuch mail system
2076 #
2077 # For more information about notmuch, see https://notmuchmail.org
2078
2079 # Database configuration
2080 #
2081 # The only value supported here is 'path' which should be the top-level
2082 # directory where your mail currently exists and to where mail will be
2083 # delivered in the future. Files should be individual email messages.
2084 # Notmuch will store its database within a sub-directory of the path
2085 # configured here named ".notmuch".
2086 #
2087 [database]
2088 path=/home/amin/mail
2089
2090 # User configuration
2091 #
2092 # Here is where you can let notmuch know how you would like to be
2093 # addressed. Valid settings are
2094 #
2095 # name Your full name.
2096 # primary_email Your primary email address.
2097 # other_email A list (separated by ';') of other email addresses
2098 # at which you receive email.
2099 #
2100 # Notmuch will use the various email addresses configured here when
2101 # formatting replies. It will avoid including your own addresses in the
2102 # recipient list of replies, and will set the From address based on the
2103 # address to which the original email was addressed.
2104 #
2105 [user]
2106 name=Amin Bandali
2107 primary_email=amin@aminb.org
2108 other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
2109
2110 # Configuration for "notmuch new"
2111 #
2112 # The following options are supported here:
2113 #
2114 # tags A list (separated by ';') of the tags that will be
2115 # added to all messages incorporated by "notmuch new".
2116 #
2117 # ignore A list (separated by ';') of file and directory names
2118 # that will not be searched for messages by "notmuch new".
2119 #
2120 # NOTE: *Every* file/directory that goes by one of those
2121 # names will be ignored, independent of its depth/location
2122 # in the mail store.
2123 #
2124 [new]
2125 tags=new;
2126 #tags=unread;inbox;
2127 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2128
2129 # Search configuration
2130 #
2131 # The following option is supported here:
2132 #
2133 # exclude_tags
2134 # A ;-separated list of tags that will be excluded from
2135 # search results by default. Using an excluded tag in a
2136 # query will override that exclusion.
2137 #
2138 [search]
2139 exclude_tags=deleted;spam;
2140
2141 # Maildir compatibility configuration
2142 #
2143 # The following option is supported here:
2144 #
2145 # synchronize_flags Valid values are true and false.
2146 #
2147 # If true, then the following maildir flags (in message filenames)
2148 # will be synchronized with the corresponding notmuch tags:
2149 #
2150 # Flag Tag
2151 # ---- -------
2152 # D draft
2153 # F flagged
2154 # P passed
2155 # R replied
2156 # S unread (added when 'S' flag is not present)
2157 #
2158 # The "notmuch new" command will notice flag changes in filenames
2159 # and update tags, while the "notmuch tag" and "notmuch restore"
2160 # commands will notice tag changes and update flags in filenames
2161 #
2162 [maildir]
2163 synchronize_flags=true
2164
2165 # Cryptography related configuration
2166 #
2167 # The following option is supported here:
2168 #
2169 # gpg_path
2170 # binary name or full path to invoke gpg.
2171 #
2172 [crypto]
2173 gpg_path=gpg
2174 #+end_src
2175
2176 *** pre-new hook
2177 :PROPERTIES:
2178 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2179 :END:
2180
2181 #+begin_src sh
2182 touch /tmp/gnusieve.log
2183 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2184 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2185 #+end_src
2186
2187 *** post-new hook
2188 :PROPERTIES:
2189 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2190 :END:
2191
2192 #+begin_src sh
2193 # apply sent tag to messages sent by me
2194 notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca
2195
2196 # initial tagging
2197 notmuch tag -latest -- tag:latest
2198 notmuch tag +inbox +unread +latest -new -- tag:new
2199
2200
2201 # apply tags to lists
2202
2203 # <aminb>
2204 notmuch tag -inbox +lists/~sircmpwn/srht-admins -- folder:amin/lists/~sircmpwn/srht-admins
2205 notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
2206 notmuch tag -inbox +lists/~sircmpwn/srht-dev -- folder:amin/lists/~sircmpwn/srht-dev
2207 notmuch tag -inbox +lists/~sircmpwn/srht-discuss -- folder:amin/lists/~sircmpwn/srht-discuss
2208
2209 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2210 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2211
2212 notmuch tag -inbox +pay -- folder:amin/pay
2213 # </aminb>
2214
2215 # <uw>
2216 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2217 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2218
2219 notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2220 notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2221 notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2222 notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2223 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2224 # </uw>
2225
2226 # <gnu>
2227 notmuch tag -inbox +lists/emacs-devel -- folder:gnu/l/emacs-devel
2228 notmuch tag -inbox +lists/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2229 notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2230 notmuch tag -inbox +lists/fencepost-users -- folder:gnu/l/fencepost-users
2231 notmuch tag -inbox +lists/guix-devel -- folder:gnu/l/guix-devel
2232 notmuch tag -inbox +lists/guile-devel -- folder:gnu/l/guile-devel
2233 notmuch tag -inbox +lists/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2234 notmuch tag -inbox +lists/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2235 notmuch tag -inbox +lists/www-commits -- folder:gnu/l/www-commits
2236 notmuch tag -inbox +lists/www-discuss -- folder:gnu/l/www-discuss
2237 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2238
2239 notmuch tag -inbox +lists/deepspec -- folder:gnu/l/deepspec
2240 notmuch tag -inbox +lists/haskell-cafe -- folder:gnu/l/haskell-cafe
2241 notmuch tag -inbox +lists/haskell-art -- folder:gnu/l/haskell-art
2242 notmuch tag -inbox +lists/notmuch -- folder:gnu/l/notmuch
2243 # </gnu>
2244
2245 notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2246 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2247 #+end_src
2248
2249 *** notmuch.service
2250 :PROPERTIES:
2251 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2252 :END:
2253
2254 #+begin_src conf :tangle no
2255 [Unit]
2256 Description=notmuch service
2257
2258 [Service]
2259 Type=oneshot
2260 ExecStart=/usr/bin/notmuch new
2261 StandardOutput=syslog
2262 StandardError=syslog
2263 #+end_src
2264
2265 *** notmuch.timer
2266 :PROPERTIES:
2267 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2268 :END:
2269
2270 #+begin_src conf :tangle no
2271 [Unit]
2272 Description=notmuch timer
2273
2274 [Timer]
2275 OnCalendar=*:0/5
2276 Persistent=true
2277 Unit=notmuch.service
2278
2279 [Install]
2280 WantedBy=timers.target
2281 #+end_src
2282
2283 ** offlineimap
2284
2285 *** offlineimaprc
2286 :PROPERTIES:
2287 :header-args+: :tangle ~/.offlineimaprc
2288 :END:
2289
2290 #+begin_src conf :tangle no
2291 [general]
2292 pythonfile = ~/.offlineimap.py
2293 accounts = Gmail, aminb
2294 maxsyncaccounts = 3
2295
2296 [Account Gmail]
2297 localrepository = GmailL
2298 remoterepository = GmailR
2299
2300 [Account aminb]
2301 localrepository = aminbL
2302 remoterepository = aminbR
2303
2304 [Repository GmailL]
2305 type = Maildir
2306 localfolders = ~/Maildir/Gmail
2307
2308 [Repository GmailR]
2309 type = IMAP
2310 remotehost = imap.gmail.com
2311 remoteusereval = mailuser("gmail")
2312 remotepasseval = mailpasswd("gmail")
2313 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2314 ssl = yes
2315 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2316 maxconnections = 1
2317 realdelete = no
2318
2319 [Repository aminbL]
2320 type = Maildir
2321 localfolders = ~/Maildir/aminb
2322
2323 [Repository aminbR]
2324 type = IMAP
2325 remotehost = mail.aminb.org
2326 remoteusereval = mailuser("aminb")
2327 remotepasseval = mailpasswd("aminb")
2328 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2329 ssl = yes
2330 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2331 maxconnections = 1
2332 realdelete = no
2333 #+end_src
2334
2335 *** offlineimap.py
2336 :PROPERTIES:
2337 :header-args+: :tangle ~/.offlineimap.py
2338 :END:
2339
2340 #+begin_src python :tangle no
2341 import os
2342 import subprocess
2343
2344 def mailpasswd(acct):
2345 acct = os.path.basename(acct)
2346 path = "/home/amin/.passwd/%s.gpg" % acct
2347 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2348 try:
2349 return subprocess.check_output(args).strip()
2350 except subprocess.CalledProcessError:
2351 return ""
2352
2353 def mailuser(acct):
2354 acct = os.path.basename(acct)
2355 path = "/home/amin/.passwd/%s" % acct
2356 args = ["cat", path]
2357 try:
2358 return subprocess.check_output(args).strip()
2359 except subprocess.CalledProcessError:
2360 return ""
2361
2362 def prime_gpg_agent():
2363 ret = False
2364 i = 1
2365 while not ret:
2366 ret = (mailpasswd("prime") == "prime")
2367 if i > 2:
2368 from offlineimap.ui import getglobalui
2369 sys.stderr.write("Error reading in passwords. Terminating.\n")
2370 getglobalui().terminate()
2371 i += 1
2372 return ret
2373
2374 prime_gpg_agent()
2375 #+end_src
2376
2377 ** pigeonhole
2378 *** gnu.sieve
2379 :PROPERTIES:
2380 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2381 :END:
2382
2383 #+begin_src conf
2384 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2385
2386 if anyof (
2387 address :is "from" "webmasters@gnu.org",
2388 address :is "from" "webmasters-comment@gnu.org") {
2389 fileinto :create "webmasters";
2390 stop;
2391 }
2392
2393 include :personal "lists";
2394 #+end_src
2395
2396 *** lists.sieve
2397 :PROPERTIES:
2398 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2399 :END:
2400
2401 #+begin_src conf
2402 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2403 "include" ];
2404
2405 if anyof (
2406 header :contains "list-id" "<emacs-devel.gnu.org>",
2407 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2408 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2409 header :contains "list-id" "<fencepost-users.gnu.org>",
2410 header :contains "list-id" "<guix-devel.gnu.org>",
2411 header :contains "list-id" "<guile-devel.gnu.org>",
2412 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2413 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2414 header :contains "list-id" "<www-commits.gnu.org>",
2415 header :contains "list-id" "<www-discuss.gnu.org>",
2416 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2417 header :contains "list-id" "<haskell-cafe.haskell.org>",
2418 header :contains "list-id" "<haskell-art.we.lurk.org>",
2419 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2420 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2421 set :lower "listname" "${1}";
2422 fileinto :create "l/${listname}";
2423 }
2424 }
2425 #+end_src
2426
2427 ** polybar
2428
2429 *** config
2430 :PROPERTIES:
2431 :header-args+: :tangle ~/.config/polybar/config
2432 :END:
2433
2434 #+begin_src conf :tangle no
2435 ;=====================================================
2436 ;
2437 ; To learn more about how to configure Polybar
2438 ; go to https://github.com/jaagr/polybar
2439 ;
2440 ; The README contains alot of information
2441 ;
2442 ;=====================================================
2443
2444 [colors]
2445 ;background = ${xrdb:color0:#222}
2446 background = #222
2447 background-alt = #444
2448 ;foreground = ${xrdb:color7:#222}
2449 foreground = #eee
2450 foreground-alt = #888
2451 primary = #ffb52a
2452 secondary = #e60053
2453 alert = #bd2c40
2454
2455 [bar/main]
2456 ;monitor = ${env:MONITOR:HDMI-1}
2457 width = 100%
2458 height = 27
2459 ;offset-x = 1%
2460 ;offset-y = 1%
2461 radius = 3.0
2462 fixed-center = true
2463
2464 background = ${colors.background}
2465 foreground = ${colors.foreground}
2466
2467 line-size = 3
2468 line-color = #f00
2469
2470 border-size = 4
2471 border-color = #00000000
2472
2473 padding-left = 0
2474 padding-right = 2
2475
2476 module-margin-left = 2
2477 module-margin-right = 2
2478
2479 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2480 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2481 font-2 = Wuncon Siji:pixelsize=10;1
2482 font-3 = FontAwesome:pixelsize=10;1
2483
2484 modules-left = bspwm xwindow
2485 modules-center =
2486 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2487
2488 tray-position = right
2489 tray-padding = 1
2490 ;tray-transparent = true
2491 ;tray-background = #0063ff
2492 tray-maxsize = 18
2493
2494 wm-restack = bspwm
2495
2496 ;override-redirect = true
2497
2498 scroll-up = bspwm-desknext
2499 scroll-down = bspwm-deskprev
2500
2501 [module/xwindow]
2502 type = internal/xwindow
2503 label = %title:0:50:...%
2504
2505 [module/xkeyboard]
2506 type = internal/xkeyboard
2507 blacklist-0 = num lock
2508
2509 format-prefix = " "
2510 format-prefix-foreground = ${colors.foreground-alt}
2511 format-prefix-underline = ${colors.secondary}
2512
2513 label-layout = %layout%
2514 label-layout-underline = ${colors.secondary}
2515
2516 label-indicator-padding = 2
2517 label-indicator-margin = 1
2518 label-indicator-background = ${colors.secondary}
2519 label-indicator-underline = ${colors.secondary}
2520
2521 [module/filesystem]
2522 type = internal/fs
2523 interval = 25
2524
2525 mount-0 = /
2526
2527 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2528 label-unmounted = %mountpoint% not mounted
2529 label-unmounted-foreground = ${colors.foreground-alt}
2530
2531 [module/bspwm]
2532 type = internal/bspwm
2533
2534 label-focused = %index%
2535 label-focused-background = ${colors.background-alt}
2536 label-focused-underline= ${colors.primary}
2537 label-focused-padding = 2
2538
2539 label-occupied = %index%
2540 label-occupied-padding = 2
2541
2542 label-urgent = %index%!
2543 label-urgent-background = ${colors.alert}
2544 label-urgent-padding = 2
2545
2546 label-empty = %index%
2547 label-empty-foreground = ${colors.foreground-alt}
2548 label-empty-padding = 2
2549
2550 [module/i3]
2551 type = internal/i3
2552 format = <label-state> <label-mode>
2553 index-sort = true
2554 wrapping-scroll = false
2555
2556 ; Only show workspaces on the same output as the bar
2557 ;pin-workspaces = true
2558
2559 label-mode-padding = 2
2560 label-mode-foreground = #000
2561 label-mode-background = ${colors.primary}
2562
2563 ; focused = Active workspace on focused monitor
2564 label-focused = %index%
2565 label-focused-background = ${module/bspwm.label-focused-background}
2566 label-focused-underline = ${module/bspwm.label-focused-underline}
2567 label-focused-padding = ${module/bspwm.label-focused-padding}
2568
2569 ; unfocused = Inactive workspace on any monitor
2570 label-unfocused = %index%
2571 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2572
2573 ; visible = Active workspace on unfocused monitor
2574 label-visible = %index%
2575 label-visible-background = ${self.label-focused-background}
2576 label-visible-underline = ${self.label-focused-underline}
2577 label-visible-padding = ${self.label-focused-padding}
2578
2579 ; urgent = Workspace with urgency hint set
2580 label-urgent = %index%
2581 label-urgent-background = ${module/bspwm.label-urgent-background}
2582 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2583
2584 [module/mpd]
2585 type = internal/mpd
2586 format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2587
2588 icon-prev = 
2589 icon-stop = 
2590 icon-play = 
2591 icon-pause = 
2592 icon-next = 
2593
2594 label-song-maxlen = 25
2595 label-song-ellipsis = true
2596
2597 [module/xbacklight]
2598 type = internal/xbacklight
2599
2600 format = <label> <bar>
2601 label = BL
2602
2603 bar-width = 10
2604 bar-indicator = |
2605 bar-indicator-foreground = #ff
2606 bar-indicator-font = 2
2607 bar-fill = ─
2608 bar-fill-font = 2
2609 bar-fill-foreground = #9f78e1
2610 bar-empty = ─
2611 bar-empty-font = 2
2612 bar-empty-foreground = ${colors.foreground-alt}
2613
2614 [module/backlight-acpi]
2615 inherit = module/xbacklight
2616 type = internal/backlight
2617 ;card = intel_backlight
2618 card = mba6x_backlight
2619
2620 [module/cpu]
2621 type = internal/cpu
2622 interval = 2
2623 format-prefix = " "
2624 format-prefix-foreground = ${colors.foreground-alt}
2625 format-underline = #f90000
2626 label = %percentage%%
2627
2628 [module/memory]
2629 type = internal/memory
2630 interval = 2
2631 format-prefix = " "
2632 format-prefix-foreground = ${colors.foreground-alt}
2633 format-underline = #4bffdc
2634 label = %percentage_used%%
2635
2636 [module/wlan]
2637 type = internal/network
2638 interface =
2639 interval = 3.0
2640
2641 format-connected = <ramp-signal> <label-connected>
2642 format-connected-underline = #9f78e1
2643 label-connected = %essid%
2644
2645 format-disconnected =
2646 ;format-disconnected = <label-disconnected>
2647 ;format-disconnected-underline = ${self.format-connected-underline}
2648 ;label-disconnected = %ifname% disconnected
2649 ;label-disconnected-foreground = ${colors.foreground-alt}
2650
2651 ramp-signal-0 = 
2652 ramp-signal-1 = 
2653 ramp-signal-2 = 
2654 ramp-signal-3 = 
2655 ramp-signal-4 = 
2656 ramp-signal-foreground = ${colors.foreground-alt}
2657
2658 [module/eth]
2659 type = internal/network
2660 interface =
2661 interval = 3.0
2662
2663 format-connected-underline = #55aa55
2664 format-connected-prefix = " "
2665 format-connected-prefix-foreground = ${colors.foreground-alt}
2666 label-connected = %local_ip%
2667
2668 format-disconnected =
2669 ;format-disconnected = <label-disconnected>
2670 ;format-disconnected-underline = ${self.format-connected-underline}
2671 ;label-disconnected = %ifname% disconnected
2672 ;label-disconnected-foreground = ${colors.foreground-alt}
2673
2674 [module/date]
2675 type = internal/date
2676 interval = 5
2677
2678 date =
2679 date-alt = " %Y-%m-%d"
2680
2681 time = %H:%M
2682 time-alt = %H:%M:%S
2683
2684 format-prefix = 
2685 format-prefix-foreground = ${colors.foreground-alt}
2686 format-underline = #0a6cf5
2687
2688 label = %date% %time%
2689
2690 [module/volume]
2691 type = internal/volume
2692
2693 format-volume = <label-volume> <bar-volume>
2694 label-volume = vol
2695 label-volume-foreground = ${root.foreground}
2696
2697 format-muted-prefix = " "
2698 format-muted-foreground = ${colors.foreground-alt}
2699 label-muted = mute
2700
2701 bar-volume-width = 10
2702 bar-volume-foreground-0 = #55aa55
2703 bar-volume-foreground-1 = #55aa55
2704 bar-volume-foreground-2 = #55aa55
2705 bar-volume-foreground-3 = #55aa55
2706 bar-volume-foreground-4 = #55aa55
2707 bar-volume-foreground-5 = #f5a70a
2708 bar-volume-foreground-6 = #ff5555
2709 bar-volume-gradient = false
2710 bar-volume-indicator = |
2711 bar-volume-indicator-font = 2
2712 bar-volume-fill = ─
2713 bar-volume-fill-font = 2
2714 bar-volume-empty = ─
2715 bar-volume-empty-font = 2
2716 bar-volume-empty-foreground = ${colors.foreground-alt}
2717
2718 [module/battery]
2719 type = internal/battery
2720 battery = BAT0
2721 adapter = ADP1
2722 full-at = 64
2723
2724 format-charging = <animation-charging> <label-charging>
2725 format-charging-underline = #ffb52a
2726
2727 format-discharging = <ramp-capacity> <label-discharging>
2728 format-discharging-underline = ${self.format-charging-underline}
2729
2730 format-full-prefix = " "
2731 format-full-prefix-foreground = ${colors.foreground-alt}
2732 format-full-underline = ${self.format-charging-underline}
2733
2734 ramp-capacity-0 = 
2735 ramp-capacity-1 = 
2736 ramp-capacity-2 = 
2737 ramp-capacity-foreground = ${colors.foreground-alt}
2738
2739 animation-charging-0 = 
2740 animation-charging-1 = 
2741 animation-charging-2 = 
2742 animation-charging-foreground = ${colors.foreground-alt}
2743 animation-charging-framerate = 750
2744
2745 [module/temperature]
2746 type = internal/temperature
2747 thermal-zone = 1
2748 warn-temperature = 66
2749
2750 format = <ramp> <label>
2751 format-underline = #f50a4d
2752 format-warn = <ramp> <label-warn>
2753 format-warn-underline = ${self.format-underline}
2754
2755 label = %temperature%
2756 label-warn = %temperature%
2757 label-warn-foreground = ${colors.secondary}
2758
2759 ramp-0 = 
2760 ramp-1 = 
2761 ramp-2 = 
2762 ramp-foreground = ${colors.foreground-alt}
2763
2764 [module/powermenu]
2765 type = custom/menu
2766
2767 format-spacing = 1
2768
2769 label-open = 
2770 label-open-foreground = ${colors.secondary}
2771 label-close =  cancel
2772 label-close-foreground = ${colors.secondary}
2773 label-separator = |
2774 label-separator-foreground = ${colors.foreground-alt}
2775
2776 menu-0-0 = reboot
2777 menu-0-0-exec = menu-open-1
2778 menu-0-1 = power off
2779 menu-0-1-exec = menu-open-2
2780
2781 menu-1-0 = cancel
2782 menu-1-0-exec = menu-open-0
2783 menu-1-1 = reboot
2784 menu-1-1-exec = sudo reboot
2785
2786 menu-2-0 = power off
2787 menu-2-0-exec = sudo poweroff
2788 menu-2-1 = cancel
2789 menu-2-1-exec = menu-open-0
2790
2791 [module/mail]
2792 type = custom/script
2793 interval = 60
2794 format = <label>
2795 format-prefix = " "
2796 format-prefix-foreground = ${colors.foreground-alt}
2797 format-underline = #0a6cf5
2798 exec = notmuch count tag:unread
2799
2800 [settings]
2801 screenchange-reload = true
2802 ;compositing-background = xor
2803 ;compositing-background = screen
2804 ;compositing-foreground = source
2805 ;compositing-border = over
2806
2807 [global/wm]
2808 margin-top = 0
2809 margin-bottom = 0
2810
2811 ; vim:ft=dosini
2812 #+end_src
2813
2814 *** polybar-launch
2815 :PROPERTIES:
2816 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2817 :END:
2818
2819 #+begin_src sh :tangle no
2820 # Terminate already running bar instances
2821 killall -q polybar
2822
2823 # Wait until the processes have been shut down
2824 while pgrep -x polybar >/dev/null; do sleep 1; done
2825
2826 # Launch main bar
2827 polybar main &
2828
2829 echo "Bars launched..."
2830 #+end_src
2831
2832 ** PowerTOP
2833 :PROPERTIES:
2834 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2835 :END:
2836
2837 #+begin_src conf
2838 [Unit]
2839 Description=Powertop tunings
2840
2841 [Service]
2842 ExecStart=/usr/bin/powertop --auto-tune
2843 RemainAfterExit=true
2844
2845 [Install]
2846 WantedBy=multi-user.target
2847 #+end_src
2848
2849 ** ranger
2850
2851 *** rc.conf
2852 :PROPERTIES:
2853 :header-args+: :tangle ~/.config/ranger/rc.conf
2854 :END:
2855
2856 #+begin_src conf :tangle no
2857 # ===================================================================
2858 # This file contains the default startup commands for ranger.
2859 # To change them, it is recommended to create the file
2860 # ~/.config/ranger/rc.conf and add your custom commands there.
2861 #
2862 # If you copy this whole file there, you may want to set the environment
2863 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2864 #
2865 # The purpose of this file is mainly to define keybindings and settings.
2866 # For running more complex python code, please create a plugin in "plugins/" or
2867 # a command in "commands.py".
2868 #
2869 # Each line is a command that will be run before the user interface
2870 # is initialized. As a result, you can not use commands which rely
2871 # on the UI such as :delete or :mark.
2872 # ===================================================================
2873
2874 # ===================================================================
2875 # == Options
2876 # ===================================================================
2877
2878 # How many columns are there, and what are their relative widths?
2879 set column_ratios 1,3,4
2880
2881 # Which files should be hidden? (regular expression)
2882 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2883
2884 # Show hidden files? You can toggle this by typing 'zh'
2885 set show_hidden false
2886
2887 # Ask for a confirmation when running the "delete" command?
2888 # Valid values are "always" (default), "never", "multiple"
2889 # With "multiple", ranger will ask only if you delete multiple files at once.
2890 set confirm_on_delete multiple
2891
2892 # Which script is used to generate file previews?
2893 # ranger ships with scope.sh, a script that calls external programs (see
2894 # README for dependencies) to preview images, archives, etc.
2895 set preview_script ~/.config/ranger/scope.sh
2896
2897 # Use the external preview script or display simple plain text previews?
2898 set use_preview_script true
2899
2900 # Open all images in this directory when running certain image viewers
2901 # like feh or sxiv? You can still open selected files by marking them.
2902 set open_all_images true
2903
2904 # Be aware of version control systems and display information.
2905 set vcs_aware false
2906
2907 # State of the three backends git, hg, bzr. The possible states are
2908 # disabled, local (only show local info), enabled (show local and remote
2909 # information).
2910 set vcs_backend_git enabled
2911 set vcs_backend_hg disabled
2912 set vcs_backend_bzr disabled
2913
2914 # Preview images in full color with the external command "w3mimgpreview"?
2915 # This requires the console web browser "w3m" and a supported terminal.
2916 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2917 set preview_images true
2918
2919 # Use a unicode "..." character to mark cut-off filenames?
2920 set unicode_ellipsis false
2921
2922 # Show dotfiles in the bookmark preview box?
2923 set show_hidden_bookmarks true
2924
2925 # Which colorscheme to use? These colorschemes are available by default:
2926 # default, jungle, snow
2927 set colorscheme default
2928
2929 # Preview files on the rightmost column?
2930 # And collapse (shrink) the last column if there is nothing to preview?
2931 set preview_files true
2932 set preview_directories true
2933 set collapse_preview true
2934
2935 # Save the console history on exit?
2936 set save_console_history true
2937
2938 # Draw the status bar on top of the browser window (default: bottom)
2939 set status_bar_on_top false
2940
2941 # Draw a progress bar in the status bar which displays the average state of all
2942 # currently running tasks which support progress bars?
2943 set draw_progress_bar_in_status_bar true
2944
2945 # Draw borders around columns?
2946 set draw_borders true
2947
2948 # Display the directory name in tabs?
2949 set dirname_in_tabs false
2950
2951 # Enable the mouse support?
2952 set mouse_enabled true
2953
2954 # Display the file size in the main column or status bar?
2955 set display_size_in_main_column true
2956 set display_size_in_status_bar true
2957
2958 # Display files tags in all columns or only in main column?
2959 set display_tags_in_all_columns true
2960
2961 # Set a title for the window?
2962 set update_title false
2963
2964 # Set the title to "ranger" in the tmux program?
2965 set update_tmux_title false
2966
2967 # Shorten the title if it gets long? The number defines how many
2968 # directories are displayed at once, 0 turns off this feature.
2969 set shorten_title 3
2970
2971 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2972 set tilde_in_titlebar false
2973
2974 # How many directory-changes or console-commands should be kept in history?
2975 set max_history_size 20
2976 set max_console_history_size 50
2977
2978 # Try to keep so much space between the top/bottom border when scrolling:
2979 set scroll_offset 8
2980
2981 # Flush the input after each key hit? (Noticable when ranger lags)
2982 set flushinput true
2983
2984 # Padding on the right when there's no preview?
2985 # This allows you to click into the space to run the file.
2986 set padding_right true
2987
2988 # Save bookmarks (used with mX and `X) instantly?
2989 # This helps to synchronize bookmarks between multiple ranger
2990 # instances but leads to *slight* performance loss.
2991 # When false, bookmarks are saved when ranger is exited.
2992 set autosave_bookmarks true
2993
2994 # You can display the "real" cumulative size of directories by using the
2995 # command :get_cumulative_size or typing "dc". The size is expensive to
2996 # calculate and will not be updated automatically. You can choose
2997 # to update it automatically though by turning on this option:
2998 set autoupdate_cumulative_size false
2999
3000 # Turning this on makes sense for screen readers:
3001 set show_cursor false
3002
3003 # One of: size, basename, mtime, type
3004 set sort natural
3005
3006 # Additional sorting options
3007 set sort_reverse false
3008 set sort_case_insensitive true
3009 set sort_directories_first true
3010
3011 # Enable this if key combinations with the Alt Key don't work for you.
3012 # (Especially on xterm)
3013 set xterm_alt_key false
3014
3015 # ===================================================================
3016 # == Local Options
3017 # ===================================================================
3018 # You can set local options that only affect a single directory.
3019
3020 # Examples:
3021 # setlocal path=~/downloads sort mtime
3022
3023 # ===================================================================
3024 # == Command Aliases in the Console
3025 # ===================================================================
3026
3027 alias e edit
3028 alias q quit
3029 alias q! quitall
3030 alias qall quitall
3031 alias setl setlocal
3032
3033 alias filter scout -prt
3034 alias find scout -aet
3035 alias mark scout -mr
3036 alias unmark scout -Mr
3037 alias search scout -rs
3038 alias search_inc scout -rts
3039 alias travel scout -aefiklst
3040
3041 # ===================================================================
3042 # == Define keys for the browser
3043 # ===================================================================
3044
3045 # Basic
3046 map Q quit!
3047 map q quit
3048 copymap q ZZ ZQ
3049
3050 map R reload_cwd
3051 map <C-r> reset
3052 map <C-l> redraw_window
3053 map <C-c> abort
3054 map <esc> change_mode normal
3055
3056 map i display_file
3057 map ? help
3058 map W display_log
3059 map w taskview_open
3060 map S shell $SHELL
3061
3062 map : console
3063 map ; console
3064 map ! console shell
3065 map @ console -p6 shell %%s
3066 map # console shell -p
3067 map s console shell
3068 map r chain draw_possible_programs; console open_with
3069 map f console find
3070 map cd console cd
3071
3072 # Tagging / Marking
3073 map t tag_toggle
3074 map ut tag_remove
3075 map "<any> tag_toggle tag=%any
3076 map <Space> mark_files toggle=True
3077 map v mark_files all=True toggle=True
3078 map uv mark_files all=True val=False
3079 map V toggle_visual_mode
3080 map uV toggle_visual_mode reverse=True
3081
3082 # For the nostalgics: Midnight Commander bindings
3083 map <F1> help
3084 map <F3> display_file
3085 map <F4> edit
3086 map <F5> copy
3087 map <F6> cut
3088 map <F7> console mkdir
3089 map <F8> console delete
3090 map <F10> exit
3091
3092 # In case you work on a keyboard with dvorak layout
3093 map <UP> move up=1
3094 map <DOWN> move down=1
3095 map <LEFT> move left=1
3096 map <RIGHT> move right=1
3097 map <HOME> move to=0
3098 map <END> move to=-1
3099 map <PAGEDOWN> move down=1 pages=True
3100 map <PAGEUP> move up=1 pages=True
3101 map <CR> move right=1
3102 map <DELETE> console delete
3103 map <INSERT> console touch
3104
3105 # VIM-like
3106 copymap <UP> k
3107 copymap <DOWN> j
3108 copymap <LEFT> h
3109 copymap <RIGHT> l
3110 copymap <HOME> gg
3111 copymap <END> G
3112 copymap <PAGEDOWN> <C-F>
3113 copymap <PAGEUP> <C-B>
3114
3115 map J move down=0.5 pages=True
3116 map K move up=0.5 pages=True
3117 copymap J <C-D>
3118 copymap K <C-U>
3119
3120 # Jumping around
3121 map H history_go -1
3122 map L history_go 1
3123 map ] move_parent 1
3124 map [ move_parent -1
3125 map } traverse
3126
3127 map gh cd ~
3128 map ge cd /etc
3129 map gu cd /usr
3130 map gd cd /dev
3131 map gl cd -r .
3132 map gL cd -r %f
3133 map go cd /opt
3134 map gv cd /var
3135 map gm cd /media
3136 map gM cd /mnt
3137 map gs cd /srv
3138 map gr cd /
3139 map gR eval fm.cd(ranger.RANGERDIR)
3140 map g/ cd /
3141 map g? cd /usr/share/doc/ranger
3142
3143 # External Programs
3144 map E edit
3145 map du shell -p du --max-depth=1 -h --apparent-size
3146 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3147 map yp shell -d echo -n %d/%f | xsel -i
3148 map yd shell -d echo -n %d | xsel -i
3149 map yn shell -d echo -n %f | xsel -i
3150
3151 # Filesystem Operations
3152 map = chmod
3153
3154 map cw console rename
3155 map A eval fm.open_console('rename ' + fm.thisfile.basename)
3156 map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3157
3158 map pp paste
3159 map po paste overwrite=True
3160 map pl paste_symlink relative=False
3161 map pL paste_symlink relative=True
3162 map phl paste_hardlink
3163 map pht paste_hardlinked_subtree
3164
3165 map dd cut
3166 map ud uncut
3167 map da cut mode=add
3168 map dr cut mode=remove
3169
3170 map yy copy
3171 map uy uncut
3172 map ya copy mode=add
3173 map yr copy mode=remove
3174
3175 # Temporary workarounds
3176 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3177 map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3178 map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3179 map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3180 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3181 map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3182 map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3183 map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3184
3185 # Searching
3186 map / console search
3187 map n search_next
3188 map N search_next forward=False
3189 map ct search_next order=tag
3190 map cs search_next order=size
3191 map ci search_next order=mimetype
3192 map cc search_next order=ctime
3193 map cm search_next order=mtime
3194 map ca search_next order=atime
3195
3196 # Tabs
3197 map <C-n> tab_new ~
3198 map <C-w> tab_close
3199 map <TAB> tab_move 1
3200 map <S-TAB> tab_move -1
3201 map <A-Right> tab_move 1
3202 map <A-Left> tab_move -1
3203 map gt tab_move 1
3204 map gT tab_move -1
3205 map gn tab_new ~
3206 map gc tab_close
3207 map uq tab_restore
3208 map <a-1> tab_open 1
3209 map <a-2> tab_open 2
3210 map <a-3> tab_open 3
3211 map <a-4> tab_open 4
3212 map <a-5> tab_open 5
3213 map <a-6> tab_open 6
3214 map <a-7> tab_open 7
3215 map <a-8> tab_open 8
3216 map <a-9> tab_open 9
3217
3218 # Sorting
3219 map or toggle_option sort_reverse
3220 map os chain set sort=size; set sort_reverse=False
3221 map ob chain set sort=basename; set sort_reverse=False
3222 map on chain set sort=natural; set sort_reverse=False
3223 map om chain set sort=mtime; set sort_reverse=False
3224 map oc chain set sort=ctime; set sort_reverse=False
3225 map oa chain set sort=atime; set sort_reverse=False
3226 map ot chain set sort=type; set sort_reverse=False
3227
3228 map oS chain set sort=size; set sort_reverse=True
3229 map oB chain set sort=basename; set sort_reverse=True
3230 map oN chain set sort=natural; set sort_reverse=True
3231 map oM chain set sort=mtime; set sort_reverse=True
3232 map oC chain set sort=ctime; set sort_reverse=True
3233 map oA chain set sort=atime; set sort_reverse=True
3234 map oT chain set sort=type; set sort_reverse=True
3235
3236 map dc get_cumulative_size
3237
3238 # Settings
3239 map zc toggle_option collapse_preview
3240 map zd toggle_option sort_directories_first
3241 map zh toggle_option show_hidden
3242 map <C-h> toggle_option show_hidden
3243 map zi toggle_option flushinput
3244 map zm toggle_option mouse_enabled
3245 map zp toggle_option preview_files
3246 map zP toggle_option preview_directories
3247 map zs toggle_option sort_case_insensitive
3248 map zu toggle_option autoupdate_cumulative_size
3249 map zv toggle_option use_preview_script
3250 map zf console filter
3251
3252 # Bookmarks
3253 map `<any> enter_bookmark %any
3254 map '<any> enter_bookmark %any
3255 map m<any> set_bookmark %any
3256 map um<any> unset_bookmark %any
3257
3258 map m<bg> draw_bookmarks
3259 copymap m<bg> um<bg> `<bg> '<bg>
3260
3261 # Generate all the chmod bindings with some python help:
3262 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3263 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3264 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3265 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3266 eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3267
3268 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3269 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3270 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3271 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3272 eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3273
3274 # ===================================================================
3275 # == Define keys for the console
3276 # ===================================================================
3277 # Note: Unmapped keys are passed directly to the console.
3278
3279 # Basic
3280 cmap <tab> eval fm.ui.console.tab()
3281 cmap <s-tab> eval fm.ui.console.tab(-1)
3282 cmap <ESC> eval fm.ui.console.close()
3283 cmap <CR> eval fm.ui.console.execute()
3284 cmap <C-l> redraw_window
3285
3286 copycmap <ESC> <C-c>
3287 copycmap <CR> <C-j>
3288
3289 # Move around
3290 cmap <up> eval fm.ui.console.history_move(-1)
3291 cmap <down> eval fm.ui.console.history_move(1)
3292 cmap <left> eval fm.ui.console.move(left=1)
3293 cmap <right> eval fm.ui.console.move(right=1)
3294 cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3295 cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3296
3297 # Line Editing
3298 cmap <backspace> eval fm.ui.console.delete(-1)
3299 cmap <delete> eval fm.ui.console.delete(0)
3300 cmap <C-w> eval fm.ui.console.delete_word()
3301 cmap <C-k> eval fm.ui.console.delete_rest(1)
3302 cmap <C-u> eval fm.ui.console.delete_rest(-1)
3303 cmap <C-y> eval fm.ui.console.paste()
3304
3305 # And of course the emacs way
3306 copycmap <up> <C-p>
3307 copycmap <down> <C-n>
3308 copycmap <left> <C-b>
3309 copycmap <right> <C-f>
3310 copycmap <home> <C-a>
3311 copycmap <end> <C-e>
3312 copycmap <delete> <C-d>
3313 copycmap <backspace> <C-h>
3314
3315 # Note: There are multiple ways to express backspaces. <backspace> (code 263)
3316 # and <backspace2> (code 127). To be sure, use both.
3317 copycmap <backspace> <backspace2>
3318
3319 # This special expression allows typing in numerals:
3320 cmap <allow_quantifiers> false
3321
3322 # ===================================================================
3323 # == Pager Keybindings
3324 # ===================================================================
3325
3326 # Movement
3327 pmap <down> pager_move down=1
3328 pmap <up> pager_move up=1
3329 pmap <left> pager_move left=4
3330 pmap <right> pager_move right=4
3331 pmap <home> pager_move to=0
3332 pmap <end> pager_move to=-1
3333 pmap <pagedown> pager_move down=1.0 pages=True
3334 pmap <pageup> pager_move up=1.0 pages=True
3335 pmap <C-d> pager_move down=0.5 pages=True
3336 pmap <C-u> pager_move up=0.5 pages=True
3337
3338 copypmap <UP> k <C-p>
3339 copypmap <DOWN> j <C-n> <CR>
3340 copypmap <LEFT> h
3341 copypmap <RIGHT> l
3342 copypmap <HOME> g
3343 copypmap <END> G
3344 copypmap <C-d> d
3345 copypmap <C-u> u
3346 copypmap <PAGEDOWN> n f <C-F> <Space>
3347 copypmap <PAGEUP> p b <C-B>
3348
3349 # Basic
3350 pmap <ESC> pager_close
3351 copypmap <ESC> q Q i <F3>
3352 pmap E edit_file
3353
3354 # ===================================================================
3355 # == Taskview Keybindings
3356 # ===================================================================
3357
3358 # Movement
3359 tmap <up> taskview_move up=1
3360 tmap <down> taskview_move down=1
3361 tmap <home> taskview_move to=0
3362 tmap <end> taskview_move to=-1
3363 tmap <pagedown> taskview_move down=1.0 pages=True
3364 tmap <pageup> taskview_move up=1.0 pages=True
3365 tmap <C-d> taskview_move down=0.5 pages=True
3366 tmap <C-u> taskview_move up=0.5 pages=True
3367
3368 copytmap <UP> k <C-p>
3369 copytmap <DOWN> j <C-n> <CR>
3370 copytmap <HOME> g
3371 copytmap <END> G
3372 copytmap <C-u> u
3373 copytmap <PAGEDOWN> n f <C-F> <Space>
3374 copytmap <PAGEUP> p b <C-B>
3375
3376 # Changing priority and deleting tasks
3377 tmap J eval -q fm.ui.taskview.task_move(-1)
3378 tmap K eval -q fm.ui.taskview.task_move(0)
3379 tmap dd eval -q fm.ui.taskview.task_remove()
3380 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3381 tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3382 tmap <delete> eval -q fm.ui.taskview.task_remove()
3383
3384 # Basic
3385 tmap <ESC> taskview_close
3386 copytmap <ESC> q Q w <C-c>
3387 #+end_src
3388
3389 *** scope.sh
3390 :PROPERTIES:
3391 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3392 :END:
3393
3394 #+begin_src sh :tangle no
3395 # ranger supports enhanced previews. If the option "use_preview_script"
3396 # is set to True and this file exists, this script will be called and its
3397 # output is displayed in ranger. ANSI color codes are supported.
3398
3399 # NOTES: This script is considered a configuration file. If you upgrade
3400 # ranger, it will be left untouched. (You must update it yourself.)
3401 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3402
3403 # Meanings of exit codes:
3404 # code | meaning | action of ranger
3405 # -----+------------+-------------------------------------------
3406 # 0 | success | success. display stdout as preview
3407 # 1 | no preview | failure. display no preview at all
3408 # 2 | plain text | display the plain content of the file
3409 # 3 | fix width | success. Don't reload when width changes
3410 # 4 | fix height | success. Don't reload when height changes
3411 # 5 | fix both | success. Don't ever reload
3412
3413 # Meaningful aliases for arguments:
3414 path="$1" # Full path of the selected file
3415 width="$2" # Width of the preview pane (number of fitting characters)
3416 height="$3" # Height of the preview pane (number of fitting characters)
3417
3418 maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3419
3420 # Find out something about the file:
3421 mimetype=$(file --mime-type -Lb "$path")
3422 extension=${path##*.}
3423
3424 # Functions:
3425 # runs a command and saves its output into $output. Useful if you need
3426 # the return value AND want to use the output in a pipe
3427 try() { output=$(eval '"$@"'); }
3428
3429 # writes the output of the previouosly used "try" command
3430 dump() { echo "$output"; }
3431
3432 # a common post-processing function used after most commands
3433 trim() { head -n "$maxln"; }
3434
3435 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3436 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3437
3438 case "$extension" in
3439 # Archive extensions:
3440 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3441 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3442 try als "$path" && { dump | trim; exit 0; }
3443 try acat "$path" && { dump | trim; exit 3; }
3444 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3445 exit 1;;
3446 rar)
3447 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3448 # PDF documents:
3449 pdf)
3450 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3451 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3452 # BitTorrent Files
3453 torrent)
3454 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3455 # HTML Pages:
3456 htm|html|xhtml)
3457 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3458 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3459 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3460 ;; # fall back to highlight/cat if the text browsers fail
3461 esac
3462
3463 case "$mimetype" in
3464 # Syntax highlight for text files:
3465 text/* | */xml)
3466 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3467 # Ascii-previews of images:
3468 image/*)
3469 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3470 # Display information about media files:
3471 video/* | audio/*)
3472 exiftool "$path" && exit 5
3473 # Use sed to remove spaces so the output fits into the narrow window
3474 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3475 esac
3476
3477 exit 1
3478 #+end_src
3479
3480 ** redshift
3481 :PROPERTIES:
3482 :header-args+: :tangle ~/.config/redshift.conf :comments none
3483 :END:
3484
3485 #+begin_src conf
3486 ; Global settings for redshift
3487 [redshift]
3488 ; Set the day and night screen temperatures (Neutral is 6500K)
3489 ;temp-day=5700
3490 ;temp-night=3500
3491
3492 ;temp-day=6500
3493 temp-day=6200
3494 ;temp-night=4800
3495 ;temp-night=5000
3496 ;temp-night=4500
3497 temp-night=4000
3498
3499 ; Enable/Disable a smooth transition between day and night
3500 ; 0 will cause a direct change from day to night screen temperature.
3501 ; 1 will gradually increase or decrease the screen temperature.
3502 transition=1
3503
3504 ; Set the screen brightness. Default is 1.0.
3505 ;brightness=0.9
3506 ; It is also possible to use different settings for day and night
3507 ; since version 1.8.
3508 ;brightness-day=0.7
3509 ;brightness-night=0.4
3510 ; Set the screen gamma (for all colors, or each color channel
3511 ; individually)
3512 ;gamma=0.8
3513 ;gamma=1.0
3514 ;gamma=0.8:0.7:0.8
3515 ; This can also be set individually for day and night since
3516 ; version 1.10.
3517 ;gamma-day=0.8:0.7:0.8
3518 ;gamma-night=0.6
3519
3520 ; Set the location-provider: 'geoclue2' or 'manual'
3521 ; type 'redshift -l list' to see possible values.
3522 ; The location provider settings are in a different section.
3523 ;location-provider=manual
3524 location-provider=geoclue2
3525
3526 ; Set the adjustment-method: 'randr', 'vidmode'
3527 ; type 'redshift -m list' to see all possible values.
3528 ; 'randr' is the preferred method, 'vidmode' is an older API.
3529 ; but works in some cases when 'randr' does not.
3530 ; The adjustment method settings are in a different section.
3531 adjustment-method=randr
3532
3533 ; Configuration of the location-provider:
3534 ; type 'redshift -l PROVIDER:help' to see the settings.
3535 ; ex: 'redshift -l manual:help'
3536 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3537 ; are negative numbers.
3538 ;[manual]
3539 ;lat=48.1
3540 ;lon=11.6
3541
3542 ; Configuration of the adjustment-method
3543 ; type 'redshift -m METHOD:help' to see the settings.
3544 ; ex: 'redshift -m randr:help'
3545 ; In this example, randr is configured to adjust screen 1.
3546 ; Note that the numbering starts from 0, so this is actually the
3547 ; second screen. If this option is not specified, Redshift will try
3548 ; to adjust _all_ screens.
3549 ;[randr]
3550 ;screen=1
3551 #+end_src
3552
3553 ** rofi
3554 :PROPERTIES:
3555 :header-args+: :tangle ~/.config/rofi/config
3556 :END:
3557
3558 #+begin_src conf
3559 rofi.font: Ubuntu Mono 13
3560 ! rofi.font: Inconsolata 16
3561 ! rofi.font: Iosevka 13
3562 ! rofi.font: Source Code Pro 11
3563 rofi.modi: run,window
3564 ! rofi.width: 640
3565 rofi.width: 600
3566 !rofi.location: 2
3567 !rofi.yoffset: 200
3568 rofi.monitor: -1
3569 !rofi.lines: 10
3570
3571 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3572 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3573 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3574
3575 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3576 #+end_src
3577
3578 ** rofi-pass
3579 :PROPERTIES:
3580 :header-args+: :tangle ~/.config/rofi-pass/config
3581 :END:
3582
3583 #+begin_src conf
3584 # permanently set alternative root dir
3585 # root=/path/to/root
3586
3587 # rofi command. Make sure to have "$@" as last argument
3588 _rofi () {
3589 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3590 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3591 }
3592
3593 # xdotool needs the keyboard layout to be set using setxkbmap
3594 # You can do this in your autostart scripts (e.g. xinitrc)
3595
3596 # If for some reason, you cannot do this, you can set the command here.
3597 # and set fix_layout to true
3598 fix_layout=false
3599
3600 layout_cmd () {
3601 setxkbmap us
3602 }
3603
3604 # fields to be used
3605 URL_field='url'
3606 USERNAME_field='user'
3607 AUTOTYPE_field='autotype'
3608
3609 # delay to be used for :delay keyword
3610 delay=2
3611
3612 ## Programs to be used
3613 # Editor
3614 EDITOR='gvim -f'
3615
3616 # Browser
3617 BROWSER='chromium'
3618
3619 ## Misc settings
3620
3621 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3622 auto_enter='false'
3623 notify='false'
3624 default_autotype='user :tab pass'
3625
3626 # color of the help messages
3627 # leave empty for autodetection
3628 help_color="#4872FF"
3629
3630 # Clipboard settings
3631 # Possible options: primary, clipboard, both
3632 clip=primary
3633
3634 # Options for generating new password entries
3635 # default_user is also used for password files that have no user field.
3636 default_user=aminb
3637 default_user2=aminban
3638 password_length=30
3639
3640 # Custom Keybindings
3641 #autotype="Alt+1"
3642 autotype="Alt+m"
3643 type_user="Alt+2"
3644 type_pass="Alt+3"
3645 open_url="Alt+4"
3646 copy_name="Alt+u"
3647 copy_url="Alt+l"
3648 copy_pass="Alt+p"
3649 show="Alt+o"
3650 copy_entry="Alt+2"
3651 type_entry="Alt+1"
3652 copy_menu="Alt+c"
3653 action_menu="Alt+a"
3654 type_menu="Alt+t"
3655 help="Alt+h"
3656 switch="Alt+x"
3657 insert_pass="Alt+n"
3658 #+end_src
3659
3660 ** sway
3661 :PROPERTIES:
3662 :header-args+: :tangle ~/.config/sway/config
3663 :END:
3664
3665 #+begin_src conf
3666 exec xrdb .Xresources
3667 ### Variables
3668 # super
3669 set $mod Mod4
3670 # alt
3671 set $mod2 Mod1
3672 set $left h
3673 set $down j
3674 set $up k
3675 set $right l
3676 set $term urxvt
3677 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3678
3679 ### Output configuration
3680 #
3681 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3682 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3683 #
3684 # Example configuration:
3685 #
3686 # output HDMI-A-1 resolution 1920x1080 position 1920,0
3687 #
3688 # You can get the names of your outputs by running: swaymsg -t get_outputs
3689
3690 ### Idle configuration
3691 #
3692 # Example configuration:
3693 #
3694 #exec swayidle \
3695 # timeout 300 'swaylock -c 000000' \
3696 # timeout 600 'swaymsg "output * dpms off"' \
3697 # resume 'swaymsg "output * dpms on"' \
3698 # before-sleep 'swaylock -c 000000'
3699 #
3700 # This will lock your screen after 300 seconds of inactivity, then turn off
3701 # your displays after another 600 seconds, and turn your screens back on when
3702 # resumed. It will also lock your screen before your computer goes to sleep.
3703
3704 ### Input configuration
3705
3706 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3707 dwt enabled
3708 tap enabled
3709 natural_scroll enabled
3710 middle_emulation enabled
3711 click_method clickfinger
3712 }
3713
3714 input "1:1:AT_Translated_Set_2_keyboard" {
3715 repeat_delay 200
3716 repeat_rate 45
3717 xkb_layout us,ir
3718 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3719 }
3720
3721
3722 ### Key bindings
3723 #
3724 # Basics:
3725 #
3726 # start a terminal
3727 bindsym $mod+Return exec $term
3728
3729 # kill focused window
3730 bindsym $mod+Shift+q kill
3731
3732 # start your launcher
3733 bindsym $mod+d exec $menu
3734
3735 # Drag floating windows by holding down $mod and left mouse button.
3736 # Resize them with right mouse button + $mod.
3737 # Despite the name, also works for non-floating windows.
3738 # Change normal to inverse to use left mouse button for resizing and right
3739 # mouse button for dragging.
3740 #floating_modifier $mod normal
3741
3742 # reload the configuration file
3743 bindsym $mod+Shift+c reload
3744
3745 # exit sway (logs you out of your wayland session)
3746 bindsym $mod+Shift+e exit
3747
3748 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3749 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3750 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3751
3752 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3753 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3754 bindsym XF86AudioMute exec pamixer --toggle-mute
3755 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3756
3757 # bspwm-esque workspace switch and window move
3758 bindsym $mod+bracketleft exec sway-ws-util switch prev
3759 bindsym $mod+bracketright exec sway-ws-util switch next
3760 bindsym $mod+braceleft exec sway-ws-util move prev follow
3761 bindsym $mod+braceright exec sway-ws-util move next follow
3762
3763 # original sway workspace switch and window move
3764 bindsym $mod2+bracketleft workspace prev
3765 bindsym $mod2+bracketright workspace next
3766 bindsym $mod2+braceleft move container to workspace prev
3767 bindsym $mod2+braceright move container to workspace next
3768 #
3769 # Moving around:
3770 #
3771 # Move your focus around
3772 bindsym $mod+$left focus left
3773 bindsym $mod+$down focus down
3774 bindsym $mod+$up focus up
3775 bindsym $mod+$right focus right
3776 # or use $mod+[up|down|left|right]
3777 bindsym $mod+Left focus left
3778 bindsym $mod+Down focus down
3779 bindsym $mod+Up focus up
3780 bindsym $mod+Right focus right
3781
3782 # _move_ the focused window with the same, but add Shift
3783 bindsym $mod+Shift+$left move left
3784 bindsym $mod+Shift+$down move down
3785 bindsym $mod+Shift+$up move up
3786 bindsym $mod+Shift+$right move right
3787 # ditto, with arrow keys
3788 bindsym $mod+Shift+Left move left
3789 bindsym $mod+Shift+Down move down
3790 bindsym $mod+Shift+Up move up
3791 bindsym $mod+Shift+Right move right
3792 #
3793 # Workspaces:
3794 #
3795 # switch to workspace
3796 bindsym $mod+1 workspace 1
3797 bindsym $mod+2 workspace 2
3798 bindsym $mod+3 workspace 3
3799 bindsym $mod+4 workspace 4
3800 bindsym $mod+5 workspace 5
3801 bindsym $mod+6 workspace 6
3802 bindsym $mod+7 workspace 7
3803 bindsym $mod+8 workspace 8
3804 bindsym $mod+9 workspace 9
3805 bindsym $mod+0 workspace 10
3806 # move focused container to workspace
3807 bindsym $mod+Shift+1 move container to workspace 1
3808 bindsym $mod+Shift+2 move container to workspace 2
3809 bindsym $mod+Shift+3 move container to workspace 3
3810 bindsym $mod+Shift+4 move container to workspace 4
3811 bindsym $mod+Shift+5 move container to workspace 5
3812 bindsym $mod+Shift+6 move container to workspace 6
3813 bindsym $mod+Shift+7 move container to workspace 7
3814 bindsym $mod+Shift+8 move container to workspace 8
3815 bindsym $mod+Shift+9 move container to workspace 9
3816 bindsym $mod+Shift+0 move container to workspace 10
3817 # Note: workspaces can have any name you want, not just numbers.
3818 # We just use 1-10 as the default.
3819 #
3820 # Layout stuff:
3821 #
3822 # You can "split" the current object of your focus with
3823 # $mod+b or $mod+v, for horizontal and vertical splits
3824 # respectively.
3825 bindsym $mod+b splith
3826 bindsym $mod+v splitv
3827
3828 # Switch the current container between different layout styles
3829 bindsym $mod+s layout stacking
3830 bindsym $mod+w layout tabbed
3831 bindsym $mod+e layout toggle split
3832
3833 # Make the current focus fullscreen
3834 bindsym $mod+f fullscreen
3835
3836 # Toggle the current focus between tiling and floating mode
3837 bindsym $mod+Shift+space floating toggle
3838
3839 # Swap focus between the tiling area and the floating area
3840 bindsym $mod+space focus mode_toggle
3841
3842 # move focus to the parent container
3843 bindsym $mod+a focus parent
3844 #
3845 # Scratchpad:
3846 #
3847 # Sway has a "scratchpad", which is a bag of holding for windows.
3848 # You can send windows there and get them back later.
3849
3850 # Move the currently focused window to the scratchpad
3851 bindsym $mod+Shift+minus move scratchpad
3852
3853 # Show the next scratchpad window or hide the focused scratchpad window.
3854 # If there are multiple scratchpad windows, this command cycles through them.
3855 bindsym $mod+minus scratchpad show
3856 #
3857 # Resizing containers:
3858 #
3859 mode "resize" {
3860 # left will shrink the containers width
3861 # right will grow the containers width
3862 # up will shrink the containers height
3863 # down will grow the containers height
3864 bindsym $left resize shrink width 10px
3865 bindsym $down resize grow height 10px
3866 bindsym $up resize shrink height 10px
3867 bindsym $right resize grow width 10px
3868
3869 # ditto, with arrow keys
3870 bindsym Left resize shrink width 10px
3871 bindsym Down resize grow height 10px
3872 bindsym Up resize shrink height 10px
3873 bindsym Right resize grow width 10px
3874
3875 # return to default mode
3876 bindsym Return mode "default"
3877 bindsym Escape mode "default"
3878 }
3879 bindsym $mod+Shift+r mode "resize"
3880
3881 #
3882 # Status Bar:
3883 #
3884 # Read `man 5 sway-bar` for more information about this section.
3885 bar {
3886 position bottom
3887 colors {
3888 statusline #ffffff
3889 background #323232
3890 inactive_workspace #32323200 #32323200 #5c5c5c
3891 }
3892 status_command i3gs ~/.config/i3gs/config
3893 }
3894
3895 include /etc/sway/config.d/*
3896 #+end_src
3897
3898 ** TLP
3899
3900 *** TODO enigma
3901 *** plasma
3902
3903 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3904 # ------------------------------------------------------------------------------
3905 # tlp - Parameters for power saving
3906 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3907
3908 # Hint: some features are disabled by default, remove the leading # to enable
3909 # them.
3910
3911 # Set to 0 to disable, 1 to enable TLP.
3912 TLP_ENABLE=1
3913
3914 # Operation mode when no power supply can be detected: AC, BAT.
3915 # Concerns some desktop and embedded hardware only.
3916 TLP_DEFAULT_MODE=AC
3917
3918 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3919 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3920 TLP_PERSISTENT_DEFAULT=0
3921
3922 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3923 # Non-zero value enables, zero disables laptop mode.
3924 DISK_IDLE_SECS_ON_AC=0
3925 DISK_IDLE_SECS_ON_BAT=2
3926
3927 # Dirty page values (timeouts in secs).
3928 MAX_LOST_WORK_SECS_ON_AC=15
3929 MAX_LOST_WORK_SECS_ON_BAT=60
3930
3931 # Hint: CPU parameters below are disabled by default, remove the leading #
3932 # to enable them, otherwise kernel default values are used.
3933
3934 # Select a CPU frequency scaling governor.
3935 # Intel Core i processor with intel_pstate driver:
3936 # powersave(*), performance.
3937 # Older hardware with acpi-cpufreq driver:
3938 # ondemand(*), powersave, performance, conservative, schedutil.
3939 # (*) is recommended.
3940 # Hint: use tlp-stat -p to show the active driver and available governors.
3941 # Important:
3942 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
3943 # efficient for *almost all* workloads and therefore kernel and most
3944 # distributions have chosen them as defaults. If you still want to change,
3945 # you should know what you're doing! You *must* disable your distribution's
3946 # governor settings or conflicts will occur.
3947 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3948 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3949
3950 # Set the min/max frequency available for the scaling governor.
3951 # Possible values strongly depend on your CPU. For available frequencies see
3952 # the output of tlp-stat -p.
3953 #CPU_SCALING_MIN_FREQ_ON_AC=0
3954 #CPU_SCALING_MAX_FREQ_ON_AC=0
3955 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3956 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3957
3958 # Set energy performance hints (HWP) for Intel P-state governor:
3959 # performance, balance_performance, default, balance_power, power
3960 # Values are given in order of increasing power saving.
3961 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3962 CPU_HWP_ON_AC=balance_performance
3963 CPU_HWP_ON_BAT=balance_power
3964
3965 # Set Intel P-state performance: 0..100 (%).
3966 # Limit the max/min P-state to control the power dissipation of the CPU.
3967 # Values are stated as a percentage of the available performance.
3968 # Requires an Intel Core i processor with intel_pstate driver.
3969 #CPU_MIN_PERF_ON_AC=0
3970 #CPU_MAX_PERF_ON_AC=100
3971 #CPU_MIN_PERF_ON_BAT=0
3972 #CPU_MAX_PERF_ON_BAT=30
3973
3974 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3975 # Requires an Intel Core i processor.
3976 # Important:
3977 # - This may conflict with your distribution's governor settings
3978 # - A value of 1 does *not* activate boosting, it just allows it
3979 #CPU_BOOST_ON_AC=1
3980 #CPU_BOOST_ON_BAT=0
3981
3982 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3983 # 0=disable, 1=enable.
3984 SCHED_POWERSAVE_ON_AC=0
3985 SCHED_POWERSAVE_ON_BAT=1
3986
3987 # Kernel NMI Watchdog:
3988 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
3989 NMI_WATCHDOG=0
3990
3991 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3992 # Frequency voltage pairs are written to:
3993 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3994 # CAUTION: only use this, if you thoroughly understand what you are doing!
3995 #PHC_CONTROLS="F:V F:V F:V F:V"
3996
3997 # Set CPU performance versus energy savings policy:
3998 # performance, balance-performance, default, balance-power, power.
3999 # Values are given in order of increasing power saving.
4000 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4001 ENERGY_PERF_POLICY_ON_AC=performance
4002 ENERGY_PERF_POLICY_ON_BAT=balance-power
4003
4004 # Disk devices; separate multiple devices with spaces (default: sda).
4005 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4006 DISK_DEVICES="sda sdb"
4007
4008 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4009 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4010 # Separate values for multiple disks with spaces. Use the special value 'keep'
4011 # to keep the hardware default for the particular disk.
4012 DISK_APM_LEVEL_ON_AC="254 254"
4013 DISK_APM_LEVEL_ON_BAT="128 128"
4014
4015 # Hard disk spin down timeout:
4016 # 0: spin down disabled
4017 # 1..240: timeouts from 5s to 20min (in units of 5s)
4018 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4019 # See 'man hdparm' for details.
4020 # Separate values for multiple disks with spaces. Use the special value 'keep'
4021 # to keep the hardware default for the particular disk.
4022 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4023 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4024
4025 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4026 # Separate values for multiple disks with spaces. Use the special value 'keep'
4027 # to keep the kernel default scheduler for the particular disk.
4028 #DISK_IOSCHED="cfq cfq"
4029
4030 # AHCI link power management (ALPM) for disk devices:
4031 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4032 # (*) Kernel >= 4.15 required, then recommended.
4033 # Multiple values separated with spaces are tried sequentially until success.
4034 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4035 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4036
4037 # Exclude host devices from AHCI link power management.
4038 # Separate multiple hosts with spaces.
4039 #SATA_LINKPWR_BLACKLIST="host1"
4040
4041 # Runtime Power Management for AHCI host and disks devices:
4042 # on=disable, auto=enable.
4043 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4044 #AHCI_RUNTIME_PM_ON_AC=on
4045 #AHCI_RUNTIME_PM_ON_BAT=on
4046
4047 # Seconds of inactivity before disk is suspended.
4048 AHCI_RUNTIME_PM_TIMEOUT=15
4049
4050 # PCI Express Active State Power Management (PCIe ASPM):
4051 # default, performance, powersave.
4052 PCIE_ASPM_ON_AC=performance
4053 PCIE_ASPM_ON_BAT=powersave
4054
4055 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4056 # auto = mid on BAT, high on AC; default = use hardware defaults.
4057 RADEON_POWER_PROFILE_ON_AC=high
4058 RADEON_POWER_PROFILE_ON_BAT=low
4059
4060 # Radeon dynamic power management method (DPM): battery, performance.
4061 RADEON_DPM_STATE_ON_AC=performance
4062 RADEON_DPM_STATE_ON_BAT=battery
4063
4064 # Radeon DPM performance level: auto, low, high; auto is recommended.
4065 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4066 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4067
4068 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4069 WIFI_PWR_ON_AC=off
4070 WIFI_PWR_ON_BAT=on
4071
4072 # Disable wake on LAN: Y/N.
4073 WOL_DISABLE=Y
4074
4075 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4076 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4077 SOUND_POWER_SAVE_ON_AC=0
4078 SOUND_POWER_SAVE_ON_BAT=0
4079
4080 # Disable controller too (HDA only): Y/N.
4081 SOUND_POWER_SAVE_CONTROLLER=N
4082
4083 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4084 # Drive can be powered on again by releasing (and reinserting) the eject lever
4085 # or by pressing the disc eject button on newer models.
4086 # Note: an UltraBay/MediaBay hard disk is never powered off.
4087 BAY_POWEROFF_ON_AC=0
4088 BAY_POWEROFF_ON_BAT=0
4089 # Optical drive device to power off (default sr0).
4090 BAY_DEVICE="sr0"
4091
4092 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4093 RUNTIME_PM_ON_AC=on
4094 RUNTIME_PM_ON_BAT=auto
4095
4096 # Exclude PCI(e) device adresses the following list from Runtime PM
4097 # (separate with spaces). Use lspci to get the adresses (1st column).
4098 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4099 RUNTIME_PM_BLACKLIST="01:00.0"
4100
4101 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4102 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4103 # prevents accidential power-on of dGPU in hybrid graphics setups.
4104 # Use "" to disable the feature completely.
4105 # Separate multiple drivers with spaces.
4106 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4107
4108 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4109 USB_AUTOSUSPEND=1
4110
4111 # Exclude listed devices from USB autosuspend (separate with spaces).
4112 # Use lsusb to get the ids.
4113 # Note: input devices (usbhid) are excluded automatically
4114 #USB_BLACKLIST="1111:2222 3333:4444"
4115
4116 # Bluetooth devices are excluded from USB autosuspend:
4117 # 0=do not exclude, 1=exclude.
4118 USB_BLACKLIST_BTUSB=0
4119
4120 # Phone devices are excluded from USB autosuspend:
4121 # 0=do not exclude, 1=exclude (enable charging).
4122 USB_BLACKLIST_PHONE=0
4123
4124 # Printers are excluded from USB autosuspend:
4125 # 0=do not exclude, 1=exclude.
4126 USB_BLACKLIST_PRINTER=1
4127
4128 # WWAN devices are excluded from USB autosuspend:
4129 # 0=do not exclude, 1=exclude.
4130 USB_BLACKLIST_WWAN=1
4131
4132 # Include listed devices into USB autosuspend even if already excluded
4133 # by the blacklists above (separate with spaces).
4134 # Use lsusb to get the ids.
4135 #USB_WHITELIST="1111:2222 3333:4444"
4136
4137 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4138 # (workaround for USB devices that cause shutdown problems).
4139 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4140
4141 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4142 # on system startup: 0=disable, 1=enable.
4143 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4144 # are ignored when this is enabled!
4145 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4146 RESTORE_DEVICE_STATE_ON_STARTUP=1
4147
4148 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4149 # Separate multiple devices with spaces.
4150 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4151
4152 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4153 # Separate multiple devices with spaces.
4154 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4155
4156 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4157 # (workaround for devices that are blocking shutdown).
4158 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4159
4160 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4161 # (to prevent other operating systems from missing radios).
4162 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4163
4164 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4165 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4166
4167 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4168 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4169
4170 # Radio devices to disable on battery when not in use (not connected):
4171 # bluetooth, wifi, wwan.
4172 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4173
4174 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4175 # required). Charging starts when the remaining capacity falls below the
4176 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4177 # Main / Internal battery (values in %)
4178 #START_CHARGE_THRESH_BAT0=75
4179 #STOP_CHARGE_THRESH_BAT0=80
4180 # Ultrabay / Slice / Replaceable battery (values in %)
4181 #START_CHARGE_THRESH_BAT1=75
4182 #STOP_CHARGE_THRESH_BAT1=80
4183
4184 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4185 #RESTORE_THRESHOLDS_ON_BAT=1
4186
4187 # ------------------------------------------------------------------------------
4188 # tlp-rdw - Parameters for the radio device wizard
4189 # Possible devices: bluetooth, wifi, wwan.
4190
4191 # Hints:
4192 # - Parameters are disabled by default, remove the leading # to enable them
4193 # - Separate multiple radio devices with spaces
4194
4195 # Radio devices to disable on connect.
4196 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4197 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4198 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4199
4200 # Radio devices to enable on disconnect.
4201 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4202 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4203 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4204
4205 # Radio devices to enable/disable when docked.
4206 #DEVICES_TO_ENABLE_ON_DOCK=""
4207 #DEVICES_TO_DISABLE_ON_DOCK=""
4208
4209 # Radio devices to enable/disable when undocked.
4210 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4211 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4212 #+end_src
4213
4214 ** X
4215
4216 *** xprofile
4217 :PROPERTIES:
4218 :header-args+: :tangle ~/.xprofile
4219 :END:
4220
4221 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4222 contrary, it's automatically sourced by LightDM, my display manager of
4223 choice.
4224
4225 #+begin_src sh :tangle no
4226 xset -b # disable bell
4227 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4228
4229 # setxkbmap -option compose:ralt
4230
4231 setxkbmap -option ctrl:nocaps # turn capslock into control
4232 setxkbmap -option altwin:swap_alt_win # swap alt and super
4233
4234 if [ $(hostname) = "plasma" ]
4235 then
4236 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4237 fi
4238
4239 if [ $(hostname) = "enigma" ]
4240 then
4241 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4242 fi
4243
4244 light -Scrs "intel_backlight" 2
4245
4246 source $HOME/.zprofile
4247
4248 export _JAVA_AWT_WM_NONREPARENTING=1
4249 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4250
4251 if [ $(hostname) = "plasma" ]
4252 then
4253 unlock-def-gk.py &
4254 fi
4255
4256 bspwm &
4257 #+end_src
4258
4259 *** X resources
4260
4261 **** Xresources
4262 :PROPERTIES:
4263 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4264 :END:
4265
4266 #+begin_src conf-xdefaults
4267 #include ".Xresources.d/fonts"
4268 ! #include ".Xresources.d/colors"
4269 #include ".Xresources.d/emacs"
4270 #include ".Xresources.d/rxvt-unicode"
4271 #+end_src
4272
4273 **** Xresources.d
4274
4275 ***** fonts
4276 :PROPERTIES:
4277 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4278 :END:
4279
4280 #+begin_src conf-xdefaults
4281 Xft.lcdfilter: lcddefault
4282 Xft.antialias: true
4283 Xft.autohint: 0
4284 Xft.hinting: true
4285 Xft.hintstyle: hintslight
4286 ! Xft.hintstyle: hintfull
4287 Xft.rgba: rgb
4288 Xft.dpi: 96
4289 #+end_src
4290
4291 ***** colors
4292 :PROPERTIES:
4293 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4294 :END:
4295
4296 #+begin_src conf-xdefaults :tangle no
4297 #include "gruvbox-light.xresources"
4298 ! #include "gruvbox-dark.xresources"
4299 #include "gruvbox-urxvt256.xresources"
4300 #+end_src
4301
4302 #+begin_src conf-xdefaults :tangle no
4303 ! -----------------------------------------------------------------------------
4304 ! File: gruvbox-light.xresources
4305 ! Description: Retro groove colorscheme generalized
4306 ! Author: morhetz <morhetz@gmail.com>
4307 ! Source: https://github.com/morhetz/gruvbox-generalized
4308 ! Last Modified: 6 Sep 2014
4309 ! -----------------------------------------------------------------------------
4310
4311 ! hard contrast: *background: #f9f5d7
4312 *background: #fbf1c7
4313 ! soft contrast: *background: #f2e5bc
4314 *foreground: #3c3836
4315 ! Black + DarkGrey
4316 *color0: #fdf4c1
4317 *color8: #928374
4318 ! DarkRed + Red
4319 *color1: #cc241d
4320 *color9: #9d0006
4321 ! DarkGreen + Green
4322 *color2: #98971a
4323 *color10: #79740e
4324 ! DarkYellow + Yellow
4325 *color3: #d79921
4326 *color11: #b57614
4327 ! DarkBlue + Blue
4328 *color4: #458588
4329 *color12: #076678
4330 ! DarkMagenta + Magenta
4331 *color5: #b16286
4332 *color13: #8f3f71
4333 ! DarkCyan + Cyan
4334 *color6: #689d6a
4335 *color14: #427b58
4336 ! LightGrey + White
4337 *color7: #7c6f64
4338 *color15: #3c3836
4339 #+end_src
4340
4341 #+begin_src conf-xdefaults :tangle no
4342 ! -----------------------------------------------------------------------------
4343 ! File: gruvbox-dark.xresources
4344 ! Description: Retro groove colorscheme generalized
4345 ! Author: morhetz <morhetz@gmail.com>
4346 ! Source: https://github.com/morhetz/gruvbox-generalized
4347 ! Last Modified: 6 Sep 2014
4348 ! -----------------------------------------------------------------------------
4349
4350 ! hard contrast: *background: #1d2021
4351 *background: #282828
4352 ! soft contrast: *background: #32302f
4353 *foreground: #ebdbb2
4354 ! Black + DarkGrey
4355 *color0: #282828
4356 *color8: #928374
4357 ! DarkRed + Red
4358 *color1: #cc241d
4359 *color9: #fb4934
4360 ! DarkGreen + Green
4361 *color2: #98971a
4362 *color10: #b8bb26
4363 ! DarkYellow + Yellow
4364 *color3: #d79921
4365 *color11: #fabd2f
4366 ! DarkBlue + Blue
4367 *color4: #458588
4368 *color12: #83a598
4369 ! DarkMagenta + Magenta
4370 *color5: #b16286
4371 *color13: #d3869b
4372 ! DarkCyan + Cyan
4373 *color6: #689d6a
4374 *color14: #8ec07c
4375 ! LightGrey + White
4376 *color7: #a89984
4377 *color15: #ebdbb2
4378 #+end_src
4379
4380 #+begin_src conf-xdefaults :tangle no
4381 ! -----------------------------------------------------------------------------
4382 ! File: gruvbox-urxvt256.xresources
4383 ! Description: Retro groove colorscheme generalized
4384 ! Author: morhetz <morhetz@gmail.com>
4385 ! Source: https://github.com/morhetz/gruvbox-generalized
4386 ! Last Modified: 13 Dec 2013
4387 ! -----------------------------------------------------------------------------
4388
4389 URxvt.color24: #076678
4390 URxvt.color66: #427b58
4391 URxvt.color88: #9d0006
4392 URxvt.color96: #8f3f71
4393 URxvt.color100: #79740e
4394 URxvt.color108: #8ec07c
4395 URxvt.color109: #83a598
4396 URxvt.color130: #af3a03
4397 URxvt.color136: #b57614
4398 URxvt.color142: #b8bb26
4399 URxvt.color167: #fb4934
4400 URxvt.color175: #d3869b
4401 URxvt.color208: #fe8019
4402 URxvt.color214: #fabd2f
4403 URxvt.color223: #ebdbb2
4404 URxvt.color228: #f2e5bc
4405 URxvt.color229: #fbf1c7
4406 URxvt.color230: #f9f5d7
4407 URxvt.color234: #1d2021
4408 URxvt.color235: #282828
4409 URxvt.color236: #32302f
4410 URxvt.color237: #3c3836
4411 URxvt.color239: #504945
4412 URxvt.color241: #665c54
4413 URxvt.color243: #7c6f64
4414 URxvt.color244: #928374
4415 URxvt.color245: #928374
4416 URxvt.color246: #a89984
4417 URxvt.color248: #bdae93
4418 URxvt.color250: #d5c4a1
4419 #+end_src
4420
4421 ***** emacs
4422 :PROPERTIES:
4423 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4424 :END:
4425
4426 #+begin_src conf-xdefaults
4427 Emacs.menuBar: off
4428 Emacs.toolBar: off
4429 Emacs.verticalScrollBars: off
4430 Emacs.cursorBlink: off
4431 Emacs.FontBackend: xft,x
4432 ! Emacs.font: Ubuntu Mono-12
4433 ! Emacs.font: Triplicate T4C-11
4434 ! Emacs.font: Ubuntu Mono-10.5
4435 ! Emacs.font: Ubuntu Mono-12
4436 ! Emacs.font: Iosevka-11
4437
4438 ! Emacs.font: Fira Mono:size=15
4439 ! Emacs.font: DejaVu Sans Mono:size=15
4440 ! Emacs.font: Inconsolata:size=17
4441 ! Emacs.font: Inconsolata:size=16
4442 ! Emacs.font: Inconsolata LGC:size=14
4443 ! Emacs.font: Source Code Pro Medium-10.5
4444 Emacs.font: Ubuntu Mono:size=16
4445 ! Emacs.font: Iosevka:size=16
4446 #+end_src
4447
4448 ***** rxvt-unicode
4449 :PROPERTIES:
4450 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4451 :END:
4452
4453 #+begin_src conf-xdefaults
4454 ! Font
4455 URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4456 URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4457 URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4458 URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4459
4460 URxvt.xftAntialias: true
4461 URxvt.letterSpace: 0
4462
4463 URxvt.depth: 0
4464 URxvt.loginShell: true
4465 URxvt.saveLines: 100000
4466 URxvt.internalBorder: 3
4467 URxvt.lineSpace: 0
4468 URxvt.scrollBar: false
4469 URxvt.scrollStyle: rxvt
4470 URxvt*scrollTtyOutput: false
4471 URxvt*scrollWithBuffer: true
4472 URxvt*scrollTtyKeypress: true
4473 URxvt.keysym.Shift-Up: command:\033]720;1\007
4474 URxvt.keysym.Shift-Down: command:\033]721;1\007
4475
4476 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4477 URxvt.perl-ext: bidi
4478 URxvt.bidi.enabled: 1
4479 URxvt.url-select.launcher: firefox
4480 URxvt.url-select.underline: true
4481 URxvt.keysym.M-u: perl:url-select:select_next
4482 URxvt.keysym.M-Escape: perl:keyboard-select:activate
4483 URxvt.keysym.M-s: perl:keyboard-select:search
4484 URxvt.url-launcher: /usr/bin/firefox
4485 URxvt.matcher.button: 1
4486 URxvt.iso14755: false
4487 URxvt.iso14755_53: false
4488 URxvt.keysym.M-c: perl:clipboard:copy
4489 URxvt.keysym.M-v: perl:clipboard:paste
4490 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4491 URxvt.keysym.C-Up: font-size:increase
4492 URxvt.keysym.C-Down: font-size:decrease
4493 URxvt.keysym.C-S-Up: font-size:incglobal
4494 URxvt.keysym.C-S-Down: font-size:decglobal
4495 URxvt.keysym.C-equal: font-size:reset
4496 !URxvt.keysym.C-question: font-size:show
4497
4498 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4499
4500 !urxvt*foreground: white
4501 !urxvt*background: black
4502
4503 !*color0: #2E3436
4504 !*color1: #a40000
4505 !*color2: #4E9A06
4506 !*color3: #C4A000
4507 !*color4: #3465A4
4508 !*color5: #75507B
4509 !*color6: #ce5c00
4510 !*color7: #babdb9
4511 !*color8: #555753
4512 !*color9: #EF2929
4513 !*color10: #8AE234
4514 !*color11: #FCE94F
4515 !*color12: #729FCF
4516 !*color13: #AD7FA8
4517 !*color14: #fcaf3e
4518 !*color15: #EEEEEC
4519
4520 !URxvt.foreground: #C8C8C8
4521 !URxvt.background: #FFFFFF
4522
4523 !! black
4524 !*color0: #2E3436
4525 !*color8: #555753
4526 !! red
4527 !*color1: #a40000
4528 !*color9: #EF2929
4529 !! green
4530 !*color2: #4E9A06
4531 !*color10: #8AE234
4532 !! yellow
4533 !*color3: #C4A000
4534 !*color11: #FCE94F
4535 !! blue
4536 !*color4: #3465A4
4537 !*color12: #729FCF
4538 !! purple
4539 !*color5: #75507B
4540 !*color13: #AD7FA8
4541 !! orange (replaces cyan)
4542 !*color6: #ce5c00
4543 !*color14: #fcaf3e
4544 !! white
4545 !*color7: #babdb9
4546 !*color15: #EEEEEC
4547
4548 ! Tango colour theme for rxvt-unicode
4549 URxvt.background: #FFFFFF
4550 URxvt.foreground: #000000
4551
4552 ! Black
4553 URxvt.color0: #2E3436
4554 URxvt.color8: #757773
4555
4556 ! Red
4557 URxvt.color1: #CC0000
4558 URxvt.color9: #EF2929
4559
4560 ! Green
4561 URxvt.color2: #4E9A06
4562 URxvt.color10: #8AE234
4563
4564 ! Yellow
4565 URxvt.color3: #C4A000
4566 URxvt.color11: #FCE94F
4567
4568 ! Blue
4569 URxvt.color4: #3465A4
4570 URxvt.color12: #729FCF
4571
4572 ! Magenta
4573 URxvt.color5: #75507B
4574 URxvt.color13: #AD7FA8
4575
4576 !! Cyan
4577 !URxvt.color6: #06989A
4578 !URxvt.color14: #34E2E2
4579 ! orange (replaces cyan)
4580 *color6: #ce5c00
4581 *color14: #fcaf3e
4582
4583 ! White
4584 URxvt.color7: #D3D7CF
4585 URxvt.color15: #EEEEEC
4586 #+end_src
4587
4588 ** XDG
4589 :PROPERTIES:
4590 :header-args+: :tangle ~/.config/user-dirs.dirs
4591 :END:
4592
4593 #+begin_src conf
4594 XDG_DESKTOP_DIR="$HOME/Desktop"
4595 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4596 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4597 XDG_MUSIC_DIR="$HOME/usr/music"
4598 XDG_PICTURES_DIR="$HOME/usr/pics"
4599 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4600 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4601 XDG_VIDEOS_DIR="$HOME/usr/vids"
4602 #+end_src
4603
4604 ** Zathura
4605 :PROPERTIES:
4606 :header-args+: :tangle ~/.config/zathura/zathurarc
4607 :END:
4608
4609 #+begin_src conf
4610 set smooth-scroll true
4611 set selection-clipboard clipboard
4612 set zoom-step 05
4613 set default-bg "#272727"
4614 set statusbar-bg "#272727"
4615 set inputbar-bg "#373737"
4616 #+end_src
4617
4618 ** Zsh
4619
4620 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4621 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4622 installed.
4623
4624 *** zimrc
4625 :PROPERTIES:
4626 :header-args+: :tangle ~/.zimrc
4627 :END:
4628
4629 #+begin_src sh
4630
4631
4632 #################
4633 # CORE SETTINGS #
4634 #################
4635
4636 #
4637 # Zim settings
4638 #
4639
4640 # Select what modules you would like enabled.
4641 # The second line of modules may depend on options set by modules in the first
4642 # line. These dependencies are noted on the respective module's README.md.
4643 zmodules=(directory environment git git-info history input ssh utility custom \
4644 syntax-highlighting history-substring-search prompt completion)
4645
4646
4647 ###################
4648 # MODULE SETTINGS #
4649 ###################
4650
4651 #
4652 # Prompt
4653 #
4654
4655 # Set your desired prompt here
4656 zprompt_theme='pure'
4657 #PURE_PROMPT_SYMBOL=λ
4658 #PURE_PROMPT_SYMBOL=δ
4659 PURE_PROMPT_SYMBOL=➜
4660
4661 #
4662 # Completion
4663 #
4664
4665 # set an optional host-specific filename for the completion cache file
4666 # if none is provided, the default '.zcompdump' is used.
4667 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4668
4669 #
4670 # Utility
4671 #
4672
4673 # Uncomment to enable command correction prompts
4674 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4675 setopt CORRECT
4676
4677 #
4678 # Environment
4679 #
4680
4681 # Set the string below to the desired terminal title format string.
4682 # The terminal title is redrawn upon directory change, however, variables like
4683 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4684 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4685 # The example below uses the following format: 'username@host:/current/directory'
4686 ztermtitle='%n@%m:%~'
4687
4688 #
4689 # Input
4690 #
4691
4692 # Uncomment to enable double-dot expansion.
4693 # This appends '../' to your input for each '.' you type after an initial '..'
4694 #zdouble_dot_expand='true'
4695
4696 #
4697 # Syntax-Highlighting
4698 #
4699
4700 # This determines what highlighters will be used with the syntax-highlighting module.
4701 # Documentation of the highlighters can be found here:
4702 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4703 # For (u)rxvt, termite and gnome-terminal users,
4704 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4705 #zhighlighters=(main brackets cursor)
4706 zhighlighters=(main brackets pattern)
4707
4708
4709 #
4710 # SSH
4711 #
4712
4713 # Load these ssh identities with the ssh module
4714 zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4715
4716
4717 #
4718 # Pacman
4719 #
4720
4721 # Set (optional) pacman front-end.
4722 zpacman_frontend='yay'
4723
4724 # Load any helper scripts as defined here
4725 #zpacman_helper=(aur)
4726 #+end_src
4727
4728 *** zlogin
4729 :PROPERTIES:
4730 :header-args+: :tangle ~/.zlogin
4731 :END:
4732
4733 #+begin_src sh
4734
4735
4736 #
4737 # User configuration sourced by login shells
4738 #
4739
4740 # Initialize zim
4741 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4742 #+end_src
4743
4744 *** zprofile
4745 :PROPERTIES:
4746 :header-args+: :tangle ~/.zprofile
4747 :END:
4748
4749 #+begin_src sh
4750 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4751 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4752 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4753 export XDG_CONFIG_HOME=$HOME/.config
4754 export XDG_DATA_HOME=$HOME/.local/share
4755 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4756 export MAILDIR="$HOME/mail"
4757 export CVS_RSH=ssh
4758 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4759 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4760 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4761
4762 # Eiffel2Java stuff
4763 #export JAVA_HOME=/usr/lib/jvm/default
4764 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4765 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4766 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4767
4768 #export PATH="$HOME/usr/build/pvs:$PATH"
4769 #export SBCLISP_HOME=/usr/share/sbcl-source
4770 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4771
4772 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4773
4774 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4775 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4776
4777 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4778 #+end_src
4779
4780 *** zshenv
4781 :PROPERTIES:
4782 :header-args+: :tangle ~/.zshenv
4783 :END:
4784
4785 #+begin_src sh
4786 # Ensure that a non-login, non-interactive shell has a defined environment.
4787 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4788 source "${ZDOTDIR:-$HOME}/.zprofile"
4789 fi
4790 #+end_src
4791
4792 *** zshrc
4793 :PROPERTIES:
4794 :header-args+: :tangle ~/.zshrc
4795 :END:
4796
4797 #+begin_src sh
4798 # Bash-like navigation
4799 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4800 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4801 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4802 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4803
4804 #disable -r time # disable shell reserved word
4805 #alias time='time -p' # -p for POSIX output
4806
4807 # rehash if last command was pacaur or pacman
4808 # (so that zsh picks up changes in $PATH immediately)
4809 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4810
4811 #
4812 # User configuration sourced by interactive shells
4813 #
4814
4815 # Change default zim location
4816 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4817
4818 # Start zim
4819 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4820
4821 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4822 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4823
4824 setopt globdots
4825
4826 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4827 source ~/.zsh/zsh-autopair/autopair.zsh
4828
4829
4830 ### fzf ###
4831
4832 source /usr/share/fzf/key-bindings.zsh
4833 source /usr/share/fzf/completion.zsh
4834
4835 # Accept history selection instead of putting it on
4836 # the command line
4837 fzf-history-widget-accept() {
4838 fzf-history-widget
4839 zle accept-line
4840 }
4841 #zle -N fzf-history-widget-accept
4842 #bindkey '^R' fzf-history-widget-accept
4843
4844 # alt+c preview
4845 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4846
4847 ### fzf ###
4848
4849
4850 # aliases
4851 alias mpv="mpv --ytdl-format mp4"
4852 alias mv="mv -iv"
4853 alias cp="cp -iv"
4854 alias scl=systemctl
4855 alias jcl=journalctl
4856 alias m="mbsync -Va; getmail; notmuch new"
4857 alias best="youtube-dl -f best"
4858 alias nixx="ssh amin@nix.aminb.org"
4859 alias fence="ssh aminb@fencepost.gnu.org"
4860
4861 aur() {
4862 cd ~/usr/build
4863 git clone https://aur.archlinux.org/${1}.git
4864 cd ${1}
4865 }
4866
4867 # i-beam cursor
4868 echo -e "\033[5 q"
4869 #echo -e "\033[6 q"
4870 #+end_src
4871
4872 * Scripts
4873
4874 This section contains various useful scripts and the ones used by the
4875 programs above. For instance, =toggle-tablet= for switching to and
4876 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4877 Xfce's presentation mode which keeps the screen awake, and
4878 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4879 exact brightness value.
4880
4881 ** battery-percentage-time
4882 :PROPERTIES:
4883 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/bash"
4884 :END:
4885
4886 #+begin_src bash
4887 pct=$(upower -i /org/freedesktop/UPower/devices/battery_BAT0 | grep percentage | awk '{print $2}')
4888 time=$(upower -i /org/freedesktop/UPower/devices/battery_BAT0 | grep time | awk '{print $4,$5}')
4889 echo "$pct ($time)"
4890 #+end_src
4891
4892 ** rofi-light
4893 :PROPERTIES:
4894 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4895 :END:
4896
4897 #+begin_src bash
4898 cur=$(light -G)
4899 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
4900 light -S $val
4901 #+end_src
4902
4903 ** s (run sway)
4904 :PROPERTIES:
4905 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4906 :END:
4907
4908 #+begin_src bash
4909 export _JAVA_AWT_WM_NONREPARENTING=1
4910 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4911 light -Scrs "intel_backlight" 2
4912 source $HOME/.zprofile
4913 sway
4914 #+end_src
4915
4916 ** sway-ws-util
4917 :PROPERTIES:
4918 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4919 :END:
4920
4921 #+begin_src bash
4922 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4923 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4924 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4925 dest_ws=-1
4926 op=-1
4927
4928 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4929 op="$1"
4930 if [ "$2" = "prev" ]; then
4931 dest_ws="$prev_ws"
4932 elif [ "$2" = "next" ]; then
4933 dest_ws="$next_ws"
4934 else
4935 echo "Usage: $0 $1 {prev|next} [follow]"
4936 exit 1
4937 fi
4938 else
4939 echo "Usage: $0 {switch|move} {prev|next} [follow]"
4940 exit 1
4941 fi
4942
4943 if [ "$op" = "switch" ]; then
4944 sway workspace "$dest_ws"
4945 elif [ "$op" = "move" ]; then
4946 sway move container to workspace "$dest_ws"
4947 if [ "$3" = "follow" ]; then
4948 sway workspace "$dest_ws"
4949 fi
4950 fi
4951 #+end_src
4952
4953 ** toggle-layout
4954 :PROPERTIES:
4955 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4956 :END:
4957
4958 #+begin_src bash
4959 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4960
4961 if [ "$lang" = "us" ]; then
4962 setxkbmap ir
4963 else
4964 setxkbmap us
4965 # xmodmap $HOME/.Xmodmap
4966 fi
4967 #+end_src
4968
4969 ** toggle-presentation-mode
4970 :PROPERTIES:
4971 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4972 :END:
4973
4974 #+begin_src bash
4975 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4976 #+end_src
4977
4978 ** toggle-tablet
4979 :PROPERTIES:
4980 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4981 :END:
4982
4983 This script toggles between a 'normal' mode and a 'tablet' mode, doing
4984 a few things:
4985
4986 - rotates the screen using =xrandr=, so that rotating the physical
4987 display of my X220t would have the laptop's battery on the right
4988 hand side,
4989 - enables touch screen,
4990 - properly rotates the stylus pen and touch screen pointers, and
4991 - toggles between RGB and Vertical BGR sub-pixel order.
4992
4993 #+begin_src bash
4994 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4995 0) # Screen is not rotated, we should rotate it right (90°)
4996 xrandr -o 3
4997 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4998 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4999 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5000 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5001 ;;
5002 1) # Currently top is rotated right, we should set it normal (0°)
5003 xrandr -o 0
5004 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5005 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5006 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5007 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5008 ;;
5009 *)
5010 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5011 exit 1
5012 ;;
5013 esac
5014 #+end_src
5015
5016 ** unlock-def-gk.py
5017 :PROPERTIES:
5018 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5019 :END:
5020
5021 #+begin_src python
5022 import gnomekeyring as gk
5023 # list_item_ids_sync('login')[0] == 1L
5024 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5025 #+end_src
5026
5027 ** wp
5028
5029 My little wallpaper changer script.
5030
5031 *** wp
5032 :PROPERTIES:
5033 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5034 :END:
5035
5036 #+begin_src bash :tangle no
5037 export DISPLAY=:0
5038
5039 case "$1" in
5040 "day")
5041 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5042 ;;
5043 "night")
5044 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5045 ;;
5046 *)
5047 echo $"Usage: $0 {day|night}"
5048 exit 1
5049 esac
5050 #+end_src
5051
5052 *** wp-auto
5053 :PROPERTIES:
5054 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5055 :END:
5056
5057 #+begin_src bash :tangle no
5058 SED=$(which sed)
5059 ROFI=$(which rofi)
5060
5061 export DISPLAY=:0
5062 HOUR=$(date +%H)
5063
5064 if [ -z "${SED}" ]
5065 then
5066 echo "Did not find 'sed', script cannot continue."
5067 exit 1
5068 fi
5069 if [ -z "${ROFI}" ]
5070 then
5071 echo "Did not find rofi, there is no point to continue."
5072 exit 1
5073 fi
5074
5075 ###
5076 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5077 # Repeated calls should leave the config clean-ish
5078 ###
5079 function set_theme()
5080 {
5081 CDIR="${HOME}/.config/rofi/"
5082 if [ ! -d "${CDIR}" ]
5083 then
5084 mkdir -p ${CDIR}
5085 fi
5086 if [ -f "${CDIR}/config" ]
5087 then
5088 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5089 fi
5090 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5091
5092 }
5093
5094 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5095 then
5096 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5097 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5098 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5099 else
5100 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5101 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5102 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5103 fi
5104 #+end_src
5105
5106 *** wp.service
5107 :PROPERTIES:
5108 :header-args+: :tangle ~/.config/systemd/user/wp.service
5109 :END:
5110
5111 #+begin_src conf :tangle no
5112 [Unit]
5113 Description=wallpaper service
5114
5115 [Service]
5116 Type=oneshot
5117 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5118 #+end_src
5119
5120 *** wp.timer
5121 :PROPERTIES:
5122 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5123 :END:
5124
5125 #+begin_src conf :tangle no
5126 [Unit]
5127 [Unit]
5128 Description=wallpaper timer
5129
5130 [Timer]
5131 OnCalendar=07,21:00
5132 Unit=wp.service
5133 Persistent=true
5134
5135 [Install]
5136 WantedBy=timers.target
5137 #+end_src
5138
5139 ** zathura-sync.sh
5140 :PROPERTIES:
5141 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5142 :END:
5143
5144 #+begin_src sh
5145 pos="$1"
5146 pdffile="$2"
5147 zathura --synctex-forward "$pos" "$pdffile" || \
5148 (
5149 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5150 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5151 #+end_src
5152 ** Fun :)
5153
5154 *** eat-em
5155 :PROPERTIES:
5156 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5157 :END:
5158
5159 #+begin_src sh
5160 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5161 # [ESC] character in original post removed here.
5162
5163 # ANSI Color -- use these variables to easily have different color
5164 # and format output. Make sure to output the reset sequence after
5165 # colors (f = foreground, b = background), and use the 'off'
5166 # feature for anything you turn on.
5167
5168 initializeANSI()
5169 {
5170 esc="$(echo -en '\e')"
5171
5172 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5173 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5174 cyanf="${esc}[36m"; whitef="${esc}[37m"
5175
5176 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5177 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5178 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5179
5180 boldon="${esc}[1m"; boldoff="${esc}[22m"
5181 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5182 ulon="${esc}[4m"; uloff="${esc}[24m"
5183 invon="${esc}[7m"; invoff="${esc}[27m"
5184
5185 reset="${esc}[0m"
5186 }
5187
5188 # note in this first use that switching colors doesn't require a reset
5189 # first - the new color overrides the old one.
5190
5191 #clear
5192
5193 initializeANSI
5194
5195 cat << EOF
5196
5197 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5198 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5199 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5200 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5201 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5202 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5203
5204 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5205 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5206 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5207 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5208 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5209 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5210
5211 EOF
5212 #+end_src
5213
5214 *** invade-em
5215 :PROPERTIES:
5216 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5217 :END:
5218
5219 #+begin_src bash
5220 #
5221 # ANSI color scheme script featuring Space Invaders
5222 #
5223 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5224 # Modified by lolilolicon
5225 #
5226
5227 f=3 b=4
5228 for j in f b; do
5229 for i in {0..7}; do
5230 printf -v $j$i %b "\e[${!j}${i}m"
5231 done
5232 done
5233 bld=$'\e[1m'
5234 rst=$'\e[0m'
5235
5236 cat << EOF
5237
5238 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5239 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5240 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5241 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5242
5243 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5244 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5245 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5246 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5247
5248
5249 $f7▌$rst
5250
5251 $f7▌$rst
5252
5253 $f7 ▄█▄ $rst
5254 $f7▄█████████▄$rst
5255 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5256
5257 EOF
5258 #+end_src