git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh :tangle no
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf :tangle no
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf :tangle no
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** Dunst
 393 :PROPERTIES:
 394 :header-args+: :tangle ~/.config/dunst/dunstrc
 395 :END:
 396
 397 #+begin_src conf
 398 [global]
 399 #font = Ubuntu Mono 10.5
 400 font = Inconsolata 11
 401
 402 # Path to default icons.
 403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 404
 405 icon_position = left
 406 # <b>bold</b>
 407 # <i>italic</i>
 408 # <s>strikethrough<s/>
 409 # <u>underline</u>
 410 markup = full
 411 # The format of the message. Possible variables are:
 412 #   %a  appname
 413 #   %s  summary
 414 #   %b  body
 415 #   %i  iconname (including its path)
 416 #   %I  iconname (without its path)
 417 #   %p  progress value if set ([  0%] to [100%]) or nothing
 418 # Markup is allowed
 419 format = "<b>%s</b>\n%b"
 420 # Sort messages by urgency
 421 sort = yes
 422 # Show how many messages are currently hidden (because of geometry)
 423 indicate_hiddenl= no
 424 # Alignment of message text.
 425 # Possible values are "left", "center" and "right"
 426 alignment = center
 427 # The frequency with wich text that is longer than the notification
 428 # window allows bounces back and forth.
 429 # This option conflicts with 'word_wrap'.
 430 # Set to 0 to disable
 431 bounce_freq = 3
 432 # show age of message if message is older than show_age_threshold seconds.
 433 # set to -1 to disable
 434 show_age_threshold = -1
 435 # split notifications into multiple lines if they don't fit into geometry
 436 word_wrap = yes
 437 # ignore newlines '\n' in notifications
 438 ignore_newline = no
 439 # The geometry of the message window.
 440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 441 # The height is measured in number of notifications everything else in pixels. If the width
 442 # is omitted but the height is given ("-geometry x2"), the message window
 443 # expands over the whole screen (dmenu-like). If width is 0,
 444 # the window expands to the longest message displayed.
 445 # A positive x is measured from the left, a negative from the
 446 # right side of the screen.  Y is measured from the top and down respectevly.
 447 # The width can be negative. In this case the actual width is the
 448 # screen width minus the width defined in within the geometry option.
 449 #geometry = "410x12-12+12"
 450 #geometry = "0x0-30-30"
 451 geometry = "260x12-30-30"
 452 # The transparency of the window. range: [0; 100]
 453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 454 transparency = 0
 455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 456 # for longer than idle_threshold seconds.
 457 # Set to 0 to disable.
 458 idle_threshold = 120
 459 # Which monitor should the notifications be displayed on.
 460 monitor = 0
 461 # Display notification on focused monitor. Possible modes are:
 462 # mouse: follow mouse pointer
 463 # keyboard: follow window with keyboard focus
 464 # none: don't follow anything
 465 #
 466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 467 # This should be the case for almost all modern windowmanagers.
 468 #
 469 # If this option is set to mouse or keyboard, the monitor option will be
 470 # ignored.
 471 follow = keyboard
 472 # should a notification popped up from history be sticky or
 473 # timeout as if it would normally do.
 474 sticky_history = yes
 475 # The height of a single line. If the height is smaller than the font height,
 476 # it will get raised to the font height.
 477 # This adds empty space above and under the text.
 478 line_height = 0
 479
 480 show_indicators = yes
 481
 482 # Draw a line of 'separatpr_height' pixel height between two notifications.
 483 # Set to 0 to disable
 484 separator_height = 3
 485 # padding between text and separator
 486 padding = 8
 487 # horizontal padding
 488 horizontal_padding = 8
 489 # Define a color for the separator.
 490 # possible values are:
 491 #  * auto: dunst tries to find a color fitting to the background
 492 #  * foreground: use the same color as the foreground
 493 #  * frame: use the same color as the frame.
 494 #  * anything else will be interpreted as a X color
 495 separator_color = foreground
 496 # print a notification on startup
 497 # This is mainly for error detection, since dbus (re-)starts dunst
 498 # automatically after a crash.
 499 startup_notification = false
 500 # dmenu path
 501 #dmenu = /usr/bin/dmenu -p dunst:
 502 dmenu = /usr/bin/rofi -dmenu -p dunst:
 503 # browser for opening urls in context menu
 504 browser = /usr/bin/firefox -new-tab
 505 [frame]
 506 width = 0
 507 color = "#377222"
 508 [shortcuts]
 509 # shortcuts are specified as [modifier+][modifier+]...key
 510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 511 # and 'mod4' (windows-key)
 512 # xev might be helpful to find names for keys
 513 # close notification
 514 close = ctrl+space
 515 # close all notifications
 516 close_all = ctrl+shift+space
 517 # redisplay last message(s)
 518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 519 history = ctrl+shift+h
 520 # context menu
 521 context = ctrl+shift+period
 522 [urgency_low]
 523 # IMPORTANT: colors have to be defined in quotation marks.
 524 # Otherwise the '#' and following  would be interpreted as a comment.
 525 background = "#1d2a30"
 526 foreground = "#71c2af"
 527 timeout = 3
 528 [urgency_normal]
 529 background = "#1d2a30"
 530 foreground = "#71c2af"
 531 timeout = 0
 532 [urgency_critical]
 533 background = "#1d2a30"
 534 foreground = "#ff9982"
 535 timeout = 0
 536
 537 # Every section that isn't one of the above is interpreted as a rules
 538 # to override settings for certain messages.
 539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 541 # and 'format'.
 542 # Shell-like globbing will get expanded.
 543 #
 544 # SCRIPTING
 545 # you can specify a script that gets run when the rule matches by setting
 546 # the 'script' option.
 547 # The script will be called as follows:
 548 # script appname summary body icon urgency
 549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 550 #
 551 # NOTE: if you don't want a notification to be displayed, set the format to ""
 552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 553 # fitting options for rules.
 554 #[espeak]
 555 #    summary = "*"
 556 #    script = dunst_espeak.sh
 557 #[script-test]
 558 #    summary = "*script*"
 559 #    script = dunst_test.sh
 560 #[ignore]
 561 ## This notification will not be displayed
 562 #    summary = "foobar"
 563 #    format = ""
 564 #[signed_on]
 565 #    appname = Pidgin
 566 #    summary = "*signed on*"
 567 #    urgency = low
 568 #
 569 #[signed_off]
 570 #    appname = Pidgin
 571 #    summary = *signed off*
 572 #    urgency = low
 573 #
 574 #[says]
 575 #    appname = Pidgin
 576 #    summary = *says*
 577 #    urgency = critical
 578 #
 579 #[twitter]
 580 #    appname = Pidgin
 581 #    summary = *twitter.com*
 582 #    urgency = normal
 583 #
 584 [xfpm-backlight]
 585     summary = *Brightness*
 586     urgency = low
 587 #+end_src
 588
 589 ** Fontconfig
 590 :PROPERTIES:
 591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 592 :END:
 593
 594 #+begin_src xml
 595 <?xml version="1.0"?>
 596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 597 <fontconfig>
 598  <match target="font">
 599   <edit mode="assign" name="rgba">
 600    <const>rgb</const>
 601   </edit>
 602  </match>
 603  <match target="font">
 604   <edit mode="assign" name="hinting">
 605    <bool>true</bool>
 606   </edit>
 607  </match>
 608  <match target="font">
 609   <edit mode="assign" name="hintstyle">
 610    <const>hintslight</const>
 611   </edit>
 612  </match>
 613  <match target="font">
 614   <edit mode="assign" name="antialias">
 615    <bool>true</bool>
 616   </edit>
 617  </match>
 618  <match target="font">
 619   <edit mode="assign" name="lcdfilter">
 620    <const>lcddefault</const>
 621   </edit>
 622  </match>
 623  <dir>~/.fonts</dir>
 624
 625  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 626  <alias binding="same">
 627   <family>Helvetica</family>
 628   <accept>
 629    <family>Liberation Sans</family>
 630   </accept>
 631 </alias>
 632 </fontconfig>
 633 #+end_src
 634
 635 ** getmail
 636
 637 *** getmailrc
 638 :PROPERTIES:
 639 :header-args+: :tangle ~/.getmail/getmailrc
 640 :END:
 641
 642 #+begin_src conf
 643 [retriever]
 644 type = SimplePOP3SSLRetriever
 645 server = fencepost.gnu.org
 646 username = aminb
 647 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 648 port = 995
 649 use_apop = True
 650
 651 [destination]
 652 type = Maildir
 653 path = ~/mail/gnu/Inbox/
 654
 655 [options]
 656 delete = True
 657 #+end_src
 658
 659 *** getmail.service
 660 :PROPERTIES:
 661 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 662 :END:
 663
 664 #+begin_src conf :tangle no
 665 [Unit]
 666 Description=getmail service
 667
 668 [Service]
 669 Type=oneshot
 670 ExecStart=/usr/bin/getmail
 671 StandardOutput=syslog
 672 StandardError=syslog
 673 #+end_src
 674
 675 *** getmail.timer
 676 :PROPERTIES:
 677 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 678 :END:
 679
 680 #+begin_src conf :tangle no
 681 [Unit]
 682 Description=getmail timer
 683
 684 [Timer]
 685 OnCalendar=*:0/30
 686 Persistent=true
 687 Unit=getmail.service
 688
 689 [Install]
 690 WantedBy=timers.target
 691 #+end_src
 692
 693 ** Git
 694
 695 *** gitconfig
 696 :PROPERTIES:
 697 :header-args+: :tangle ~/.gitconfig
 698 :END:
 699
 700 **** user
 701 #+begin_src conf
 702 [user]
 703     name = Amin Bandali
 704     email = amin@gnu.org
 705     signingkey = CDDE75F903538E71813CDA27D1FBA36627D65876
 706 #+end_src
 707
 708 **** signing
 709 #+begin_src conf
 710 [commit]
 711     gpgsign = true
 712 # [format]
 713 #     signoff = true
 714 #+end_src
 715
 716 **** core
 717 #+begin_src conf
 718 [core]
 719     autocrlf = input  # CRLF -> LF on commit
 720     editor = emacsclient -t
 721     excludesfile = ~/.gitignore_global
 722     pager = "less"
 723 #+end_src
 724
 725 **** gpg
 726 #+begin_src conf
 727 [gpg]
 728     program = gpg2
 729 #+end_src
 730
 731 **** alias
 732 #+begin_src conf
 733 [alias]
 734     git = !exec git  # handle nested git calls, e.g. git git status
 735     aliases = config --get-regexp '^alias\\.'
 736     a = add
 737     s = status
 738     sl = status --long
 739     c = checkout
 740     cb = checkout -b
 741     b = branch
 742     r = rebase
 743     p = pull
 744     pr = pull --rebase
 745     ps = push
 746     psf = push --force
 747     nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
 748     nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
 749 #+end_src
 750
 751 **** color
 752 #+begin_src conf
 753 [color]
 754     ui = auto
 755 [color "status"]
 756     added = green bold
 757     changed = red bold
 758     untracked = red bold
 759 [color "branch"]
 760     current = green bold
 761     remote = magenta bold
 762 [color "diff"]
 763     new = green bold
 764     old = red bold
 765 #+end_src
 766
 767 **** status
 768 #+begin_src conf
 769 [status]
 770     # showUntrackedFiles = all
 771     short=true
 772     branch=true
 773 #+end_src
 774
 775 **** github
 776 #+begin_src conf
 777 [github]
 778         user = aminb
 779 #+end_src
 780
 781 **** send-email
 782 #+begin_src conf
 783 [sendemail]
 784         smtpuser = aminb
 785         smtpserver = fencepost.gnu.org
 786         smtpserverport = 587
 787         smtpencryption = tls
 788         annotate = yes
 789 #+end_src
 790
 791 *** gitignore
 792 :PROPERTIES:
 793 :header-args+: :tangle ~/.gitignore_global
 794 :END:
 795
 796 #+begin_src conf
 797 *.orig
 798 *.py[co]
 799 *.sublime-workspace
 800 *~
 801 .DS_Store
 802 *.elc
 803 *-autoloads.el
 804 #+end_src
 805
 806 ** GnuPG
 807 :PROPERTIES:
 808 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 809 :END:
 810
 811 #+begin_src conf
 812 default-cache-ttl 43200
 813 max-cache-ttl 43200
 814
 815 default-cache-ttl-ssh 10800
 816 max-cache-ttl-ssh 10800
 817
 818 # pinentry-program /usr/bin/pinentry-qt
 819 #+end_src
 820
 821 ** GTK
 822
 823 *** gtk-2.0
 824 :PROPERTIES:
 825 :header-args+: :tangle ~/.gtkrc-2.0
 826 :END:
 827
 828 #+begin_src conf
 829 gtk-theme-name="Greybird"
 830 gtk-icon-theme-name="Paper"
 831 gtk-font-name="Ubuntu 10"
 832 gtk-menu-images=0
 833 # gtk-key-theme-name = "Emacs"
 834 #+end_src
 835
 836 *** gtk-3.0
 837 :PROPERTIES:
 838 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 839 :END:
 840
 841 #+begin_src conf :tangle no
 842 [Settings]
 843 gtk-icon-theme-name = Paper
 844 # gtk-theme-name = Adwaita
 845
 846 gtk-theme-name = Greybird
 847 # gtk-theme-name = Arc-Darker
 848 # gtk-theme-name = Numix-ArchBlue
 849
 850 gtk-font-name = Ubuntu 10
 851 # gtk-key-theme-name = Emacs
 852 #+end_src
 853
 854 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 855 :PROPERTIES:
 856 :header-args+: :tangle ~/.config/i3gs/config
 857 :END:
 858
 859 #+begin_src conf :comments none :tangle no
 860 borders_width=0 0 2 0
 861 separator_width=10
 862
 863 #[mpd]
 864 #preset=MPD
 865 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
 866 #borders_color=#7FDBFF
 867
 868 [ram]
 869 preset=RAM
 870 title=<span weight='heavy' fgcolor='#3D9970'> </span>
 871 borders_color=#3D9970
 872
 873 #[cpu]
 874 #preset=CPU
 875 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
 876 #borders_color=#2ECC40
 877
 878 #[hdd]
 879 #preset=HDD
 880 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
 881 #borders_color=#01FF70
 882
 883 [volume]
 884 command=volume-info
 885 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
 886 borders_color=#7FDBFF
 887
 888 [battery]
 889 preset=BAT
 890 command=battery-percentage-time
 891 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
 892 borders_color=#39CCCC
 893
 894 [wifi]
 895 preset=WIFI
 896 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 897 borders_color=#01FF70
 898
 899 [date]
 900 preset=DATE
 901 command=date '+%-I:%M, %a %b %d '
 902 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 903 borders_color=#FFDC00
 904 separator_width=0
 905 #+end_src
 906
 907 ** i3status
 908 :PROPERTIES:
 909 :header-args+: :tangle ~/.config/i3status/config
 910 :END:
 911
 912 #+begin_src conf :comments none
 913 # i3status configuration file.
 914 # see "man i3status" for documentation.
 915
 916 # It is important that this file is edited as UTF-8.
 917 # The following line should contain a sharp s:
 918 # ß
 919 # If the above line is not correctly displayed, fix your editor first!
 920
 921 general {
 922         colors = true
 923         interval = 5
 924 }
 925
 926 # order += "ipv6"
 927 order += "disk /"
 928 order += "disk /data"
 929 order += "wireless _first_"
 930 # order += "ethernet _first_"
 931 order += "battery 0"
 932 order += "volume master"
 933 order += "load"
 934 order += "tztime local"
 935
 936 wireless _first_ {
 937         format_up = "W:%quality %essid %ip"
 938         format_down = "W: down"
 939 }
 940
 941 # ethernet _first_ {
 942 #         # if you use %speed, i3status requires root privileges
 943 #         format_up = "E: %ip (%speed)"
 944 #         format_down = "E: down"
 945 # }
 946
 947 battery 0 {
 948         format = "%status %percentage %remaining (%consumption)"
 949         path = "/sys/class/power_supply/BAT%d/uevent"
 950         low_threshold = "10"
 951         threshold_type = "percentage"
 952         last_full_capacity = true
 953         integer_battery_capacity = true
 954         hide_seconds = true
 955 }
 956
 957 tztime local {
 958         format = "%-I:%M%P %a %b %d"
 959 }
 960
 961 volume master {
 962         format = "♪ %volume"
 963         format_muted = "🔇 %volume"
 964         device = "pulse"
 965 }
 966
 967 load {
 968         format = "%1min"
 969 }
 970
 971 disk "/" {
 972         format = "/ %avail"
 973 }
 974
 975 disk "/data" {
 976         format = "/data %avail"
 977 }
 978 #+end_src
 979
 980 ** isync
 981
 982 *** mbsyncrc
 983 :PROPERTIES:
 984 :header-args+: :tangle ~/.mbsyncrc
 985 :END:
 986
 987 #+begin_src conf
 988 # Global defaults
 989 CopyArrivalDate yes
 990
 991 ######
 992 IMAPAccount amin
 993 Host nix.aminb.org
 994 User amin@aminb.org
 995 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 996 SSLType IMAPS
 997
 998 IMAPStore amin-remote
 999 Account amin
1000
1001 MaildirStore amin-local
1002 Path ~/mail/amin/
1003 Inbox ~/mail/amin/Inbox
1004 SubFolders Verbatim
1005
1006 Channel amin
1007 Master :amin-remote:
1008 Slave :amin-local:
1009 Patterns * !dovecot*
1010 Create Both
1011 SyncState *
1012
1013 ######
1014 IMAPAccount uwaterloo
1015 Host connect.uwaterloo.ca
1016 User abandali
1017 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1018 SSLType IMAPS
1019
1020 IMAPStore uwaterloo-remote
1021 Account uwaterloo
1022
1023 MaildirStore uwaterloo-local
1024 Path ~/mail/uwaterloo/
1025 Inbox ~/mail/uwaterloo/Inbox
1026 SubFolders Verbatim
1027
1028 Channel uwaterloo
1029 Master :uwaterloo-remote:
1030 Slave :uwaterloo-local:
1031 Patterns * !dovecot*
1032 Create Both
1033 SyncState *
1034 #+end_src
1035
1036 *** mbsync.service
1037 :PROPERTIES:
1038 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1039 :END:
1040
1041 #+begin_src conf :tangle no
1042 [Unit]
1043 Description=mbsync service
1044
1045 [Service]
1046 Type=oneshot
1047 ExecStart=/usr/bin/mbsync -Va
1048 StandardOutput=syslog
1049 StandardError=syslog
1050 #+end_src
1051
1052 *** mbsync.timer
1053 :PROPERTIES:
1054 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1055 :END:
1056
1057 #+begin_src conf :tangle no
1058 [Unit]
1059 Description=mbsync timer
1060
1061 [Timer]
1062 OnCalendar=*:0/15
1063 Persistent=true
1064 Unit=mbsync.service
1065
1066 [Install]
1067 WantedBy=timers.target
1068 #+end_src
1069
1070 ** Latexmk
1071 :PROPERTIES:
1072 :header-args+: :tangle ~/.latexmkrc
1073 :END:
1074
1075 #+begin_src conf
1076 $pdf_previewer = "start zathura %O %S";
1077 $clean_ext = "aux out";
1078
1079 # $pdf_update_method = 4;
1080 # $pdf_update_command = "zathura %O %S";
1081
1082 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1083 # by Ctrl+click in the PDF.
1084 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1085 # editor.
1086 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1087 #+end_src
1088
1089 ** libinput
1090
1091 Improve XPS 15 9560's touchpad experience.
1092
1093 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1094 #+begin_src conf :tangle no
1095 Section "InputClass"
1096     Identifier "libinput touchpad catchall"
1097     Driver "libinput"
1098     MatchIsTouchpad "on"
1099     Option "ClickMethod" "clickfinger"
1100     Option "NaturalScrolling" "true"
1101     Option "Tapping" "on"
1102     Option "TappingButtonMap" "lrm"
1103 EndSection
1104 #+end_src
1105
1106 ** mpd
1107 :PROPERTIES:
1108 :header-args+: :tangle ~/.config/mpd/mpd.conf
1109 :END:
1110
1111 #+begin_src conf
1112 # An example configuration file for MPD.
1113 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1114
1115
1116 # Files and directories #######################################################
1117 #
1118 # This setting controls the top directory which MPD will search to discover the
1119 # available audio files and add them to the daemon's online database. This
1120 # setting defaults to the XDG directory, otherwise the music directory will be
1121 # be disabled and audio files will only be accepted over ipc socket (using
1122 # file:// protocol) or streaming files over an accepted protocol.
1123 #
1124 music_directory         "~/usr/music"
1125 #
1126 # This setting sets the MPD internal playlist directory. The purpose of this
1127 # directory is storage for playlists created by MPD. The server will use
1128 # playlist files not created by the server but only if they are in the MPD
1129 # format. This setting defaults to playlist saving being disabled.
1130 #
1131 playlist_directory              "~/.mpd/playlists"
1132 #
1133 # This setting sets the location of the MPD database. This file is used to
1134 # load the database at server start up and store the database while the
1135 # server is not up. This setting defaults to disabled which will allow
1136 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1137 # files over an accepted protocol.
1138 #
1139 db_file                 "~/.mpd/database"
1140 #
1141 # These settings are the locations for the daemon log files for the daemon.
1142 # These logs are great for troubleshooting, depending on your log_level
1143 # settings.
1144 #
1145 # The special value "syslog" makes MPD use the local syslog daemon. This
1146 # setting defaults to logging to syslog, otherwise logging is disabled.
1147 #
1148 log_file                        "~/.mpd/log"
1149 #
1150 # This setting sets the location of the file which stores the process ID
1151 # for use of mpd --kill and some init scripts. This setting is disabled by
1152 # default and the pid file will not be stored.
1153 #
1154 pid_file                        "~/.mpd/pid"
1155 #
1156 # This setting sets the location of the file which contains information about
1157 # most variables to get MPD back into the same general shape it was in before
1158 # it was brought down. This setting is disabled by default and the server
1159 # state will be reset on server start up.
1160 #
1161 state_file                      "~/.mpd/state"
1162 #
1163 # The location of the sticker database.  This is a database which
1164 # manages dynamic information attached to songs.
1165 #
1166 sticker_file                    "~/.mpd/sticker.sql"
1167 #
1168 ###############################################################################
1169
1170
1171 # General music daemon options ################################################
1172 #
1173 # This setting specifies the user that MPD will run as. MPD should never run as
1174 # root and you may use this setting to make MPD change its user ID after
1175 # initialization. This setting is disabled by default and MPD is run as the
1176 # current user.
1177 #
1178 #user                           "nobody"
1179 #
1180 # This setting specifies the group that MPD will run as. If not specified
1181 # primary group of user specified with "user" setting will be used (if set).
1182 # This is useful if MPD needs to be a member of group such as "audio" to
1183 # have permission to use sound card.
1184 #
1185 #group                          "nogroup"
1186 #
1187 # This setting sets the address for the daemon to listen on. Careful attention
1188 # should be paid if this is assigned to anything other then the default, any.
1189 # This setting can deny access to control of the daemon. Not effective if
1190 # systemd socket activiation is in use.
1191 #
1192 # For network
1193 #bind_to_address                "any"
1194 #
1195 # And for Unix Socket
1196 #bind_to_address                "~/.mpd/socket"
1197 #
1198 # This setting is the TCP port that is desired for the daemon to get assigned
1199 # to.
1200 #
1201 #port                           "6600"
1202 #
1203 # This setting controls the type of information which is logged. Available
1204 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1205 # argument is recommended for troubleshooting, though can quickly stretch
1206 # available resources on limited hardware storage.
1207 #
1208 #log_level                      "default"
1209 #
1210 # If you have a problem with your MP3s ending abruptly it is recommended that
1211 # you set this argument to "no" to attempt to fix the problem. If this solves
1212 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1213 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1214 # point gapless MP3 playback can be enabled.
1215 #
1216 #gapless_mp3_playback                   "yes"
1217 #
1218 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1219 # of starting playback after startup.
1220 #
1221 #restore_paused "no"
1222 #
1223 # This setting enables MPD to create playlists in a format usable by other
1224 # music players.
1225 #
1226 #save_absolute_paths_in_playlists       "no"
1227 #
1228 # This setting defines a list of tag types that will be extracted during the
1229 # audio file discovery process. The complete list of possible values can be
1230 # found in the user manual.
1231 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1232 #
1233 # This setting enables automatic update of MPD's database when files in
1234 # music_directory are changed.
1235 #
1236 #auto_update    "yes"
1237 #
1238 # Limit the depth of the directories being watched, 0 means only watch
1239 # the music directory itself.  There is no limit by default.
1240 #
1241 #auto_update_depth "3"
1242 #
1243 ###############################################################################
1244
1245
1246 # Symbolic link behavior ######################################################
1247 #
1248 # If this setting is set to "yes", MPD will discover audio files by following
1249 # symbolic links outside of the configured music_directory.
1250 #
1251 #follow_outside_symlinks        "yes"
1252 #
1253 # If this setting is set to "yes", MPD will discover audio files by following
1254 # symbolic links inside of the configured music_directory.
1255 #
1256 #follow_inside_symlinks         "yes"
1257 #
1258 ###############################################################################
1259
1260
1261 # Zeroconf / Avahi Service Discovery ##########################################
1262 #
1263 # If this setting is set to "yes", service information will be published with
1264 # Zeroconf / Avahi.
1265 #
1266 #zeroconf_enabled               "yes"
1267 #
1268 # The argument to this setting will be the Zeroconf / Avahi unique name for
1269 # this MPD server on the network.
1270 #
1271 #zeroconf_name                  "Music Player"
1272 #
1273 ###############################################################################
1274
1275
1276 # Permissions #################################################################
1277 #
1278 # If this setting is set, MPD will require password authorization. The password
1279 # setting can be specified multiple times for different password profiles.
1280 #
1281 #password                        "password@read,add,control,admin"
1282 #
1283 # This setting specifies the permissions a user has who has not yet logged in.
1284 #
1285 #default_permissions             "read,add,control,admin"
1286 #
1287 ###############################################################################
1288
1289
1290 # Database #######################################################################
1291 #
1292
1293 #database {
1294 #       plugin "proxy"
1295 #       host "other.mpd.host"
1296 #       port "6600"
1297 #}
1298
1299 # Input #######################################################################
1300 #
1301
1302 input {
1303         plugin "curl"
1304 #       proxy "proxy.isp.com:8080"
1305 #       proxy_user "user"
1306 #       proxy_password "password"
1307 }
1308
1309 #
1310 ###############################################################################
1311
1312 # Audio Output ################################################################
1313 #
1314
1315 audio_output {
1316     type    "pulse"
1317     name    "pulse audio"
1318 }
1319
1320 audio_output {
1321     type    "fifo"
1322     name    "my_fifo"
1323     path    "/tmp/mpd.fifo"
1324     format  "44100:16:2"
1325 }
1326
1327 # MPD supports various audio output types, as well as playing through multiple
1328 # audio outputs at the same time, through multiple audio_output settings
1329 # blocks. Setting this block is optional, though the server will only attempt
1330 # autodetection for one sound card.
1331 #
1332 # An example of an ALSA output:
1333 #
1334 #audio_output {
1335 #       type            "alsa"
1336 #       name            "My ALSA Device"
1337 ##      device          "hw:0,0"        # optional
1338 ##      mixer_type      "hardware"      # optional
1339 ##      mixer_device    "default"       # optional
1340 ##      mixer_control   "PCM"           # optional
1341 ##      mixer_index     "0"             # optional
1342 #}
1343 #
1344 # An example of an OSS output:
1345 #
1346 #audio_output {
1347 #       type            "oss"
1348 #       name            "My OSS Device"
1349 ##      device          "/dev/dsp"      # optional
1350 ##      mixer_type      "hardware"      # optional
1351 ##      mixer_device    "/dev/mixer"    # optional
1352 ##      mixer_control   "PCM"           # optional
1353 #}
1354 #
1355 # An example of a shout output (for streaming to Icecast):
1356 #
1357 #audio_output {
1358 #       type            "shout"
1359 #       encoder         "vorbis"                # optional
1360 #       name            "My Shout Stream"
1361 #       host            "localhost"
1362 #       port            "8000"
1363 #       mount           "/mpd.ogg"
1364 #       password        "hackme"
1365 #       quality         "5.0"
1366 #       bitrate         "128"
1367 #       format          "44100:16:1"
1368 ##      protocol        "icecast2"              # optional
1369 ##      user            "source"                # optional
1370 ##      description     "My Stream Description" # optional
1371 ##      url             "http://example.com"    # optional
1372 ##      genre           "jazz"                  # optional
1373 ##      public          "no"                    # optional
1374 ##      timeout         "2"                     # optional
1375 ##      mixer_type      "software"              # optional
1376 #}
1377 #
1378 # An example of a recorder output:
1379 #
1380 #audio_output {
1381 #       type            "recorder"
1382 #       name            "My recorder"
1383 #       encoder         "vorbis"                # optional, vorbis or lame
1384 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1385 ##      quality         "5.0"                   # do not define if bitrate is defined
1386 #       bitrate         "128"                   # do not define if quality is defined
1387 #       format          "44100:16:1"
1388 #}
1389 #
1390 # An example of a httpd output (built-in HTTP streaming server):
1391 #
1392 #audio_output {
1393 #       type            "httpd"
1394 #       name            "My HTTP Stream"
1395 #       encoder         "vorbis"                # optional, vorbis or lame
1396 #       port            "8000"
1397 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1398 ##      quality         "5.0"                   # do not define if bitrate is defined
1399 #       bitrate         "128"                   # do not define if quality is defined
1400 #       format          "44100:16:1"
1401 #       max_clients     "0"                     # optional 0=no limit
1402 #}
1403 #
1404 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1405 #
1406 #audio_output {
1407 #       type            "pulse"
1408 #       name            "My Pulse Output"
1409 ##      server          "remote_server"         # optional
1410 ##      sink            "remote_server_sink"    # optional
1411 #}
1412 #
1413 # An example of a winmm output (Windows multimedia API).
1414 #
1415 #audio_output {
1416 #       type            "winmm"
1417 #       name            "My WinMM output"
1418 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1419 #               or
1420 ##      device          "0"             # optional
1421 ##      mixer_type      "hardware"      # optional
1422 #}
1423 #
1424 # An example of an openal output.
1425 #
1426 #audio_output {
1427 #       type            "openal"
1428 #       name            "My OpenAL output"
1429 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1430 #}
1431 #
1432 # An example of an sndio output.
1433 #
1434 #audio_output {
1435 #       type            "sndio"
1436 #       name            "sndio output"
1437 #       mixer_type      "software"
1438 #}
1439 #
1440 # An example of an OS X output:
1441 #
1442 #audio_output {
1443 #       type            "osx"
1444 #       name            "My OS X Device"
1445 ##      device          "Built-in Output"       # optional
1446 ##      channel_map      "-1,-1,0,1"    # optional
1447 #}
1448 #
1449 ## Example "pipe" output:
1450 #
1451 #audio_output {
1452 #       type            "pipe"
1453 #       name            "my pipe"
1454 #       command         "aplay -f cd 2>/dev/null"
1455 ## Or if you're want to use AudioCompress
1456 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1457 ## Or to send raw PCM stream through PCM:
1458 #       command         "nc example.org 8765"
1459 #       format          "44100:16:2"
1460 #}
1461 #
1462 ## An example of a null output (for no audio output):
1463 #
1464 #audio_output {
1465 #       type            "null"
1466 #       name            "My Null Output"
1467 #       mixer_type      "none"                  # optional
1468 #}
1469 #
1470 ###############################################################################
1471
1472
1473 # Normalization automatic volume adjustments ##################################
1474 #
1475 # This setting specifies the type of ReplayGain to use. This setting can have
1476 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1477 # chooses between "track" and "album" depending on the current state of
1478 # random playback. If random playback is enabled then "track" mode is used.
1479 # See <http://www.replaygain.org> for more details about ReplayGain.
1480 # This setting is off by default.
1481 #
1482 #replaygain                     "album"
1483 #
1484 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1485 # default this setting is disabled.
1486 #
1487 #replaygain_preamp              "0"
1488 #
1489 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1490 # By default this setting is disabled.
1491 #
1492 #replaygain_missing_preamp      "0"
1493 #
1494 # This setting enables or disables ReplayGain limiting.
1495 # MPD calculates actual amplification based on the ReplayGain tags
1496 # and replaygain_preamp / replaygain_missing_preamp setting.
1497 # If replaygain_limit is enabled MPD will never amplify audio signal
1498 # above its original level. If replaygain_limit is disabled such amplification
1499 # might occur. By default this setting is enabled.
1500 #
1501 #replaygain_limit               "yes"
1502 #
1503 # This setting enables on-the-fly normalization volume adjustment. This will
1504 # result in the volume of all playing audio to be adjusted so the output has
1505 # equal "loudness". This setting is disabled by default.
1506 #
1507 #volume_normalization           "no"
1508 #
1509 ###############################################################################
1510
1511 # Character Encoding ##########################################################
1512 #
1513 # If file or directory names do not display correctly for your locale then you
1514 # may need to modify this setting.
1515 #
1516 #filesystem_charset             "UTF-8"
1517 #
1518 ###############################################################################
1519 #+end_src
1520
1521 ** msmtp
1522 :PROPERTIES:
1523 :header-args+: :tangle ~/.msmtprc
1524 :END:
1525
1526 #+begin_src conf
1527 # Set default values for all following accounts.
1528 defaults
1529 port 587
1530 tls on
1531 auth on
1532 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1533 logfile ~/.msmtp.log
1534
1535 # aminb
1536 account aminb
1537 host nix.aminb.org
1538 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1539 tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
1540 tls_starttls on
1541 from amin@aminb.org
1542 user amin@aminb.org
1543 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1544
1545 # gnu
1546 account gnu
1547 host fencepost.gnu.org
1548 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1549 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1550 tls_starttls on
1551 from aminb@gnu.org
1552 user aminb
1553 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1554
1555 # gnu (amin)
1556 account gnu-amin : gnu
1557 from amin@gnu.org
1558
1559 # gnu (mab)
1560 account gnu-mab : gnu
1561 from mab@gnu.org
1562
1563 # uwaterloo
1564 account uwaterloo
1565 host connect.uwaterloo.ca
1566 tls_starttls on
1567 from abandali@uwaterloo.ca
1568 user abandali
1569 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1570 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1571
1572 # Set a default account
1573 account default : aminb
1574 #+end_src
1575
1576 ** ncmpcpp
1577
1578 *** config
1579 :PROPERTIES:
1580 :header-args+: :tangle ~/.ncmpcpp/config
1581 :END:
1582
1583 #+begin_src conf :tangle no
1584 ##############################################################
1585 ## This is the example configuration file. Copy it to       ##
1586 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1587 ## and set up your preferences.                             ##
1588 ##############################################################
1589 #
1590 ##### directories ######
1591 ##
1592 ## Directory for storing ncmpcpp related files.
1593 ## Changing it is useful if you want to store
1594 ## everything somewhere else and provide command
1595 ## line setting for alternative location to config
1596 ## file which defines that while launching ncmpcpp.
1597 ##
1598 #
1599 ncmpcpp_directory = ~/.ncmpcpp
1600 #
1601 ##
1602 ## Directory for storing downloaded lyrics. It
1603 ## defaults to ~/.lyrics since other MPD clients
1604 ## (eg. ncmpc) also use that location.
1605 ##
1606 #
1607 #lyrics_directory = ~/.lyrics
1608 #
1609 ##### connection settings #####
1610 #
1611 #mpd_host = localhost
1612 #
1613 #mpd_port = 6600
1614 #
1615 #mpd_connection_timeout = 5
1616 #
1617 ## Needed for tag editor and file operations to work.
1618 ##
1619 mpd_music_dir = ~/usr/music
1620 #
1621 #mpd_crossfade_time = 5
1622 #
1623 ##### music visualizer #####
1624 ##
1625 ## Note: In order to make music visualizer work you'll
1626 ## need to use mpd fifo output, whose format parameter
1627 ## has to be set to 44100:16:1 for mono visualization
1628 ## or 44100:16:2 for stereo visualization. Example
1629 ## configuration (it has to be put into mpd.conf):
1630 ##
1631 ## audio_output {
1632 ##        type            "fifo"
1633 ##        name            "Visualizer feed"
1634 ##        path            "/tmp/mpd.fifo"
1635 ##        format          "44100:16:2"
1636 ## }
1637 ##
1638 #
1639 visualizer_fifo_path = /tmp/mpd.fifo
1640 #
1641 ##
1642 ## Note: Below parameter is needed for ncmpcpp
1643 ## to determine which output provides data for
1644 ## visualizer and thus allow syncing between
1645 ## visualization and sound as currently there
1646 ## are some problems with it.
1647 ##
1648 #
1649 visualizer_output_name = my fifo
1650 #
1651 ##
1652 ## If you set format to 44100:16:2, make it 'yes'.
1653 ##
1654 visualizer_in_stereo = yes
1655 #
1656 ##
1657 ## Multiply received samples by given value. Very
1658 ## useful for proper visualization of quiet music.
1659 ##
1660 #visualizer_sample_multiplier = 1
1661 #
1662 ##
1663 ## Note: Below parameter defines how often ncmpcpp
1664 ## has to "synchronize" visualizer and audio outputs.
1665 ## 30 seconds is optimal value, but if you experience
1666 ## synchronization problems, set it to lower value.
1667 ## Keep in mind that sane values start with >=10.
1668 ##
1669 #
1670 visualizer_sync_interval = 30
1671 #
1672 ##
1673 ## Note: To enable spectrum frequency visualization
1674 ## you need to compile ncmpcpp with fftw3 support.
1675 ##
1676 #
1677 ## Available values: spectrum, wave, wave_filled, ellipse.
1678 ##
1679 visualizer_type = spectrum
1680 #
1681 #visualizer_look = ●▮
1682 visualizer_look = "●•"
1683 #
1684 #visualizer_color = blue, cyan, green, yellow, magenta, red
1685 #
1686 ## Alternative subset of 256 colors for terminals that support it.
1687 ##
1688 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1689 #
1690 ##### system encoding #####
1691 ##
1692 ## ncmpcpp should detect your charset encoding
1693 ## but if it failed to do so, you can specify
1694 ## charset encoding you are using here.
1695 ##
1696 ## Note: You can see whether your ncmpcpp build
1697 ## supports charset detection by checking output
1698 ## of `ncmpcpp --version`.
1699 ##
1700 ## Note: Since MPD uses UTF-8 by default, setting
1701 ## this option makes sense only if your encoding
1702 ## is different.
1703 ##
1704 #
1705 #system_encoding = ""
1706 #
1707 ##### delays #####
1708 #
1709 ## Time of inactivity (in seconds) after playlist
1710 ## highlighting will be disabled (0 = always on).
1711 ##
1712 #playlist_disable_highlight_delay = 5
1713 #
1714 ## Defines how long messages are supposed to be visible.
1715 ##
1716 #message_delay_time = 5
1717 #
1718 ##### song format #####
1719 ##
1720 ## For a song format you can use:
1721 ##
1722 ## %l - length
1723 ## %f - filename
1724 ## %D - directory
1725 ## %a - artist
1726 ## %A - album artist
1727 ## %t - title
1728 ## %b - album
1729 ## %y - date
1730 ## %n - track number (01/12 -> 01)
1731 ## %N - full track info (01/12 -> 01/12)
1732 ## %g - genre
1733 ## %c - composer
1734 ## %p - performer
1735 ## %d - disc
1736 ## %C - comment
1737 ## %P - priority
1738 ## $R - begin right alignment
1739 ##
1740 ## If you want to make sure that a part of the format is displayed
1741 ## only when certain tags are present, you can archieve it by
1742 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1743 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1744 ## It is also possible to define a list of alternatives by providing
1745 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1746 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1747 ## present.
1748 ##
1749 ## Note: If you want to set limit on maximal length of a tag, just
1750 ## put the appropriate number between % and character that defines
1751 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1752 ##
1753 ## In addition, formats support markers used for text attributes.
1754 ## They are followed by character '$'. After that you can put:
1755 ##
1756 ## - 0 - default window color (discards all other colors)
1757 ## - 1 - black
1758 ## - 2 - red
1759 ## - 3 - green
1760 ## - 4 - yellow
1761 ## - 5 - blue
1762 ## - 6 - magenta
1763 ## - 7 - cyan
1764 ## - 8 - white
1765 ## - 9 - end of current color
1766 ## - b - bold text
1767 ## - u - underline text
1768 ## - r - reverse colors
1769 ## - a - use alternative character set
1770 ##
1771 ## If you don't want to use a non-color attribute anymore, just put it
1772 ## again, but this time insert character '/' between '$' and attribute
1773 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1774 ## or filename with reversed colors.
1775 ##
1776 ## If you want to use 256 colors and/or background colors in formats
1777 ## (the naming scheme is described below in section about color
1778 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1779 ## the artist tag to one of the non-standard colors and make it have
1780 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1781 ## that for standard colors this is interchangable with attributes
1782 ## listed above.
1783 ##
1784 ## Note: colors can be nested.
1785 ##
1786 #
1787 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1788 #
1789 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1790 #
1791 #song_library_format = {%n - }{%t}|{%f}
1792 #
1793 #
1794 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1795 #
1796 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1797 #
1798 #now_playing_prefix = $b
1799 #
1800 #now_playing_suffix = $/b
1801 #
1802 #browser_playlist_prefix = "$2playlist$9 "
1803 #
1804 #selected_item_prefix = $6
1805 #
1806 #selected_item_suffix = $9
1807 #
1808 #modified_item_prefix = $3> $9
1809 #
1810 ##
1811 ## Note: attributes are not supported for the following variables.
1812 ##
1813 #song_window_title_format = {%a - }{%t}|{%f}
1814 ##
1815 ## Note: Below variables are used for sorting songs in browser.
1816 ## The sort mode determines how songs are sorted, and can be used
1817 ## in combination with a sort format to specify a custom sorting format.
1818 ## Available values for browser_sort_mode are "name", "mtime", "format"
1819 ## and "noop".
1820 ##
1821 #
1822 #browser_sort_mode = name
1823 #
1824 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1825 #
1826 ##### columns settings #####
1827 ##
1828 ## syntax of song columns list format is "column column etc."
1829 ##
1830 ## - syntax for each column is:
1831 ##
1832 ## (width of the column)[color of the column]{displayed tag}
1833 ##
1834 ## Note: Width is by default in %, if you want a column to
1835 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1836 ## will be the column that take 10% of screen (so the real width
1837 ## will depend on actual screen size), whereas (10f)[white]{a}
1838 ## will take 10 terminal cells, no matter how wide the screen is.
1839 ##
1840 ## - color is optional (if you want the default one,
1841 ##   leave the field empty).
1842 ##
1843 ## Note: You can give a column additional attributes by putting appropriate
1844 ## character after displayed tag character. Available attributes are:
1845 ##
1846 ## - r - column will be right aligned
1847 ## - E - if tag is empty, empty tag marker won't be displayed
1848 ##
1849 ## You can also:
1850 ##
1851 ## - give a column custom name by putting it after attributes,
1852 ##   separated with character ':', e.g. {lr:Length} gives you
1853 ##   right aligned column of lengths named "Length".
1854 ##
1855 ## - define sequence of tags, that have to be displayed in case
1856 ##   predecessor is empty in a way similar to the one in classic
1857 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1858 ##   creates column named "Owner" that tries to display artist
1859 ##   tag and then composer and performer if previous ones are
1860 ##   not available.
1861 ##
1862 #
1863 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1864 #
1865 ##### various settings #####
1866 #
1867 ##
1868 ## Note: Custom command that will be executed each
1869 ## time song changes. Useful for notifications etc.
1870 ##
1871 #execute_on_song_change = ""
1872 #
1873 #playlist_show_mpd_host = no
1874 #
1875 #playlist_show_remaining_time = no
1876 #
1877 #playlist_shorten_total_times = no
1878 #
1879 #playlist_separate_albums = no
1880 #
1881 ##
1882 ## Note: Possible display modes: classic, columns.
1883 ##
1884 #playlist_display_mode = columns
1885 #
1886 #browser_display_mode = classic
1887 #
1888 #search_engine_display_mode = classic
1889 #
1890 #playlist_editor_display_mode = classic
1891 #
1892 #discard_colors_if_item_is_selected = yes
1893 #
1894 #incremental_seeking = yes
1895 #
1896 #seek_time = 1
1897 #
1898 #volume_change_step = 2
1899 #
1900 #autocenter_mode = no
1901 #
1902 #centered_cursor = no
1903 #
1904 ##
1905 ## Note: You can specify third character which will
1906 ## be used to build 'empty' part of progressbar.
1907 ##
1908 #progressbar_look = =>
1909 progressbar_look = "─╼╶"
1910 #progressbar_look = "─⊙╶"
1911 #
1912 #progressbar_boldness = yes
1913 #
1914 ## Available values: database, playlist.
1915 ##
1916 #default_place_to_search_in = database
1917 #
1918 ## Available values: classic, alternative.
1919 ##
1920 #user_interface = classic
1921 #
1922 #data_fetching_delay = yes
1923 #
1924 ## Available values: artist, album_artist, date, genre, composer, performer.
1925 ##
1926 #media_library_primary_tag = artist
1927 #
1928 ## Available values: wrapped, normal.
1929 ##
1930 #default_find_mode = wrapped
1931 #
1932 #default_tag_editor_pattern = %n - %t
1933 #
1934 #header_visibility = yes
1935 #
1936 #statusbar_visibility = yes
1937 #
1938 #titles_visibility = yes
1939 #
1940 #header_text_scrolling = yes
1941 #
1942 #cyclic_scrolling = no
1943 #
1944 #lines_scrolled = 2
1945 #
1946 #follow_now_playing_lyrics = no
1947 #
1948 #fetch_lyrics_for_current_song_in_background = no
1949 #
1950 #store_lyrics_in_song_dir = no
1951 #
1952 #generate_win32_compatible_filenames = yes
1953 #
1954 #allow_for_physical_item_deletion = no
1955 #
1956 ##
1957 ## Note: If you set this variable, ncmpcpp will try to
1958 ## get info from last.fm in language you set and if it
1959 ## fails, it will fall back to english. Otherwise it will
1960 ## use english the first time.
1961 ##
1962 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1963 ##
1964 #lastfm_preferred_language = en
1965 #
1966 #show_hidden_files_in_local_browser = no
1967 #
1968 ##
1969 ## How shall screen switcher work?
1970 ##
1971 ## - "previous" - switch between the current and previous screen.
1972 ## - "screen1,...,screenN" - switch between given sequence of screens.
1973 ##
1974 ## Screens available for use: help, playlist, browser, search_engine,
1975 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1976 ##
1977 #screen_switcher_mode = playlist, browser
1978 #
1979 ##
1980 ## Note: You can define startup screen
1981 ## by choosing screen from the list above.
1982 ##
1983 #startup_screen = playlist
1984 #
1985 ##
1986 ## Note: You can define startup slave screen
1987 ## by choosing screen from the list above or
1988 ## an empty value for no slave screen.
1989 ##
1990 #startup_slave_screen = ""
1991 #
1992 #startup_slave_screen_focus = no
1993 #
1994 ##
1995 ## Default width of locked screen (in %).
1996 ## Acceptable values are from 20 to 80.
1997 ##
1998 #
1999 #locked_screen_width_part = 50
2000 #
2001 #ask_for_locked_screen_width_part = yes
2002 #
2003 #jump_to_now_playing_song_at_start = yes
2004 #
2005 #ask_before_clearing_playlists = yes
2006 #
2007 #clock_display_seconds = no
2008 #
2009 #display_volume_level = yes
2010 #
2011 #display_bitrate = no
2012 #
2013 #display_remaining_time = no
2014 #
2015 ## Available values: none, basic, extended, perl.
2016 ##
2017 #regular_expressions = perl
2018 #
2019 ##
2020 ## Note: If below is enabled, ncmpcpp will ignore leading
2021 ## "The" word while sorting items in browser, tags in
2022 ## media library, etc.
2023 ##
2024 #ignore_leading_the = no
2025 #
2026 #block_search_constraints_change_if_items_found = yes
2027 #
2028 #mouse_support = yes
2029 #
2030 #mouse_list_scroll_whole_page = yes
2031 #
2032 #empty_tag_marker = <empty>
2033 #
2034 #tags_separator = " | "
2035 #
2036 #tag_editor_extended_numeration = no
2037 #
2038 #media_library_sort_by_mtime = no
2039 #
2040 #enable_window_title = yes
2041 #
2042 ##
2043 ## Note: You can choose default search mode for search
2044 ## engine. Available modes are:
2045 ##
2046 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2047 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2048 ##       but if your mpd is on a remote machine, downloading big database
2049 ##       to process it can take a while
2050 ## - 3 - match only exact values (this mode uses mpd function for searching
2051 ##       in database and local one for searching in current playlist)
2052 ##
2053 #
2054 #search_engine_default_search_mode = 1
2055 #
2056 #external_editor = nano
2057 #
2058 ## Note: set to yes if external editor is a console application.
2059 ##
2060 #use_console_editor = yes
2061 #
2062 ##### colors definitions #####
2063 ##
2064 ## It is possible to set a background color by setting a color
2065 ## value "<foreground>_<background>", e.g. red_black will set
2066 ## foregound color to red and background color to black.
2067 ##
2068 ## In addition, for terminals that support 256 colors it
2069 ## is possible to set one of them by using a number in range
2070 ## [1, 256] instead of color name, e.g. numerical value
2071 ## corresponding to red_black is 2_1. To find out if the
2072 ## terminal supports 256 colors, run ncmpcpp and check out
2073 ## the bottom of the help screen for list of available colors
2074 ## and their numerical values.
2075 ##
2076 ## Note: due to technical limitations of ncurses, if 256 colors
2077 ## are used, it is possible to either use only the colors with
2078 ## default background color, or all pairs from 1_1 up to 254_127,
2079 ## depending on the ncurses version used.
2080 ##
2081 #
2082 #colors_enabled = yes
2083 #
2084 #empty_tag_color = cyan
2085 #
2086 #header_window_color = default
2087 #
2088 #volume_color = default
2089 #
2090 #state_line_color = default
2091 #
2092 #state_flags_color = default
2093 #
2094 #main_window_color = yellow
2095 #
2096 #color1 = white
2097 #
2098 #color2 = green
2099 #
2100 #main_window_highlight_color = yellow
2101 #
2102 #progressbar_color = black
2103 #
2104 #progressbar_elapsed_color = green
2105 #
2106 #statusbar_color = default
2107 #
2108 #alternative_ui_separator_color = black
2109 #
2110 #active_column_color = red
2111 #
2112 #window_border_color = green
2113 #
2114 #active_window_border = red
2115 #
2116 #+end_src
2117
2118 *** bindings
2119 :PROPERTIES:
2120 :header-args+: :tangle ~/.ncmpcpp/bindings
2121 :END:
2122
2123 #+begin_src conf :tangle no
2124 def_key "j"
2125     scroll_down
2126 def_key "k"
2127     scroll_up
2128
2129 def_key "ctrl-u"
2130     page_up
2131 def_key "ctrl-d"
2132     page_down
2133
2134 def_key "h"
2135     previous_column
2136 def_key "l"
2137     next_column
2138
2139 def_key "."
2140     show_lyrics
2141
2142 def_key "n"
2143     next_found_item
2144 def_key "N"
2145     previous_found_item
2146
2147 def_key "J"
2148     move_sort_order_down
2149 def_key "K"
2150     move_sort_order_up
2151 #+end_src
2152
2153 ** notmuch
2154
2155 *** notmuch-config
2156 :PROPERTIES:
2157 :header-args+: :tangle ~/.notmuch-config
2158 :END:
2159
2160 #+begin_src conf
2161 # .notmuch-config - Configuration file for the notmuch mail system
2162 #
2163 # For more information about notmuch, see https://notmuchmail.org
2164
2165 # Database configuration
2166 #
2167 # The only value supported here is 'path' which should be the top-level
2168 # directory where your mail currently exists and to where mail will be
2169 # delivered in the future. Files should be individual email messages.
2170 # Notmuch will store its database within a sub-directory of the path
2171 # configured here named ".notmuch".
2172 #
2173 [database]
2174 path=/home/amin/mail
2175
2176 # User configuration
2177 #
2178 # Here is where you can let notmuch know how you would like to be
2179 # addressed. Valid settings are
2180 #
2181 #       name            Your full name.
2182 #       primary_email   Your primary email address.
2183 #       other_email     A list (separated by ';') of other email addresses
2184 #                       at which you receive email.
2185 #
2186 # Notmuch will use the various email addresses configured here when
2187 # formatting replies. It will avoid including your own addresses in the
2188 # recipient list of replies, and will set the From address based on the
2189 # address to which the original email was addressed.
2190 #
2191 [user]
2192 name=Amin Bandali
2193 primary_email=amin@aminb.org
2194 other_email=amin@gnu.org;abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
2195
2196 # Configuration for "notmuch new"
2197 #
2198 # The following options are supported here:
2199 #
2200 #       tags    A list (separated by ';') of the tags that will be
2201 #               added to all messages incorporated by "notmuch new".
2202 #
2203 #       ignore  A list (separated by ';') of file and directory names
2204 #               that will not be searched for messages by "notmuch new".
2205 #
2206 #               NOTE: *Every* file/directory that goes by one of those
2207 #               names will be ignored, independent of its depth/location
2208 #               in the mail store.
2209 #
2210 [new]
2211 tags=new;
2212 #tags=unread;inbox;
2213 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2214
2215 # Search configuration
2216 #
2217 # The following option is supported here:
2218 #
2219 #       exclude_tags
2220 #               A ;-separated list of tags that will be excluded from
2221 #               search results by default.  Using an excluded tag in a
2222 #               query will override that exclusion.
2223 #
2224 [search]
2225 exclude_tags=deleted;spam;
2226
2227 # Maildir compatibility configuration
2228 #
2229 # The following option is supported here:
2230 #
2231 #       synchronize_flags      Valid values are true and false.
2232 #
2233 #       If true, then the following maildir flags (in message filenames)
2234 #       will be synchronized with the corresponding notmuch tags:
2235 #
2236 #               Flag    Tag
2237 #               ----    -------
2238 #               D       draft
2239 #               F       flagged
2240 #               P       passed
2241 #               R       replied
2242 #               S       unread (added when 'S' flag is not present)
2243 #
2244 #       The "notmuch new" command will notice flag changes in filenames
2245 #       and update tags, while the "notmuch tag" and "notmuch restore"
2246 #       commands will notice tag changes and update flags in filenames
2247 #
2248 [maildir]
2249 synchronize_flags=true
2250
2251 # Cryptography related configuration
2252 #
2253 # The following option is supported here:
2254 #
2255 #       gpg_path
2256 #               binary name or full path to invoke gpg.
2257 #
2258 [crypto]
2259 gpg_path=gpg
2260 #+end_src
2261
2262 *** pre-new hook
2263 :PROPERTIES:
2264 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2265 :END:
2266
2267 #+begin_src sh
2268 touch /tmp/gnusieve.log
2269 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2270              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2271 #+end_src
2272
2273 *** post-new hook
2274 :PROPERTIES:
2275 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2276 :END:
2277
2278 #+begin_src sh
2279 # apply sent tag to messages sent by me
2280 notmuch tag -new +sent -- from:amin@aminb.org or from:amin@gnu.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
2281
2282 # initial tagging
2283 notmuch tag -latest                     -- tag:latest
2284 notmuch tag +inbox +unread +latest -new -- tag:new
2285
2286
2287 # apply tags to lists
2288
2289 # <aminb>
2290 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2291 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2292
2293 notmuch tag -inbox +pay -- folder:amin/pay
2294 notmuch tag -inbox +banking -- folder:amin/banking
2295 notmuch tag -inbox +work -- folder:amin/work
2296 # </aminb>
2297
2298 # <uw>
2299 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2300 notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2301 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2302
2303 notmuch tag -inbox +lists/alloytools       -- folder:uwaterloo/lists/alloytools
2304 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2305 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2306 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2307 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2308 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2309 # </uw>
2310
2311 # <gnu>
2312 notmuch tag -inbox +l/emacs-devel       -- folder:gnu/l/emacs-devel
2313 notmuch tag -inbox +l/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2314 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2315 notmuch tag -inbox +l/fencepost-users   -- folder:gnu/l/fencepost-users
2316 notmuch tag -inbox +l/guix-devel        -- folder:gnu/l/guix-devel
2317 notmuch tag -inbox +l/guile-devel       -- folder:gnu/l/guile-devel
2318 notmuch tag -inbox +l/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2319 notmuch tag -inbox +l/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2320 notmuch tag -inbox +l/www-commits       -- folder:gnu/l/www-commits
2321 notmuch tag -inbox +l/www-discuss       -- folder:gnu/l/www-discuss
2322 notmuch tag -inbox +webmasters          -- folder:gnu/webmasters
2323
2324 notmuch tag -inbox +l/deepspec     -- folder:gnu/l/deepspec
2325 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2326 notmuch tag -inbox +l/haskell-art  -- folder:gnu/l/haskell-art
2327 notmuch tag -inbox +l/notmuch      -- folder:gnu/l/notmuch
2328
2329 notmuch tag -inbox +l/~aminb/test-priv         -- folder:gnu/l/~aminb/test-priv
2330 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins   -- folder:gnu/l/~sircmpwn/sr.ht-admins
2331 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2332 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev      -- folder:gnu/l/~sircmpwn/sr.ht-dev
2333 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss  -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2334 # </gnu>
2335
2336 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2337 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2338 #+end_src
2339
2340 *** notmuch.service
2341 :PROPERTIES:
2342 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2343 :END:
2344
2345 #+begin_src conf :tangle no
2346 [Unit]
2347 Description=notmuch service
2348
2349 [Service]
2350 Type=oneshot
2351 ExecStart=/usr/bin/notmuch new
2352 StandardOutput=syslog
2353 StandardError=syslog
2354 #+end_src
2355
2356 *** notmuch.timer
2357 :PROPERTIES:
2358 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2359 :END:
2360
2361 #+begin_src conf :tangle no
2362 [Unit]
2363 Description=notmuch timer
2364
2365 [Timer]
2366 OnCalendar=*:0/5
2367 Persistent=true
2368 Unit=notmuch.service
2369
2370 [Install]
2371 WantedBy=timers.target
2372 #+end_src
2373
2374 ** offlineimap
2375
2376 *** offlineimaprc
2377 :PROPERTIES:
2378 :header-args+: :tangle ~/.offlineimaprc
2379 :END:
2380
2381 #+begin_src conf :tangle no
2382 [general]
2383 pythonfile = ~/.offlineimap.py
2384 accounts = Gmail, aminb
2385 maxsyncaccounts = 3
2386
2387 [Account Gmail]
2388 localrepository = GmailL
2389 remoterepository = GmailR
2390
2391 [Account aminb]
2392 localrepository = aminbL
2393 remoterepository = aminbR
2394
2395 [Repository GmailL]
2396 type = Maildir
2397 localfolders = ~/Maildir/Gmail
2398
2399 [Repository GmailR]
2400 type = IMAP
2401 remotehost = imap.gmail.com
2402 remoteusereval = mailuser("gmail")
2403 remotepasseval = mailpasswd("gmail")
2404 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2405 ssl = yes
2406 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2407 maxconnections = 1
2408 realdelete = no
2409
2410 [Repository aminbL]
2411 type = Maildir
2412 localfolders = ~/Maildir/aminb
2413
2414 [Repository aminbR]
2415 type = IMAP
2416 remotehost = mail.aminb.org
2417 remoteusereval = mailuser("aminb")
2418 remotepasseval = mailpasswd("aminb")
2419 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2420 ssl = yes
2421 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2422 maxconnections = 1
2423 realdelete = no
2424 #+end_src
2425
2426 *** offlineimap.py
2427 :PROPERTIES:
2428 :header-args+: :tangle ~/.offlineimap.py
2429 :END:
2430
2431 #+begin_src python :tangle no
2432 import os
2433 import subprocess
2434
2435 def mailpasswd(acct):
2436     acct = os.path.basename(acct)
2437     path = "/home/amin/.passwd/%s.gpg" % acct
2438     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2439     try:
2440         return subprocess.check_output(args).strip()
2441     except subprocess.CalledProcessError:
2442         return ""
2443
2444 def mailuser(acct):
2445     acct = os.path.basename(acct)
2446     path = "/home/amin/.passwd/%s" % acct
2447     args = ["cat", path]
2448     try:
2449         return subprocess.check_output(args).strip()
2450     except subprocess.CalledProcessError:
2451         return ""
2452
2453 def prime_gpg_agent():
2454   ret = False
2455   i = 1
2456   while not ret:
2457     ret = (mailpasswd("prime") == "prime")
2458     if i > 2:
2459       from offlineimap.ui import getglobalui
2460       sys.stderr.write("Error reading in passwords. Terminating.\n")
2461       getglobalui().terminate()
2462     i += 1
2463   return ret
2464
2465 prime_gpg_agent()
2466 #+end_src
2467
2468 ** pigeonhole
2469 *** gnu.sieve
2470 :PROPERTIES:
2471 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2472 :END:
2473
2474 #+begin_src conf
2475 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2476
2477 if anyof (
2478   address :is "from" "webmasters@gnu.org",
2479   address :is "from" "webmasters-comment@gnu.org") {
2480   fileinto :create "webmasters";
2481   stop;
2482 }
2483
2484 include :personal "lists";
2485 #+end_src
2486
2487 *** lists.sieve
2488 :PROPERTIES:
2489 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2490 :END:
2491
2492 #+begin_src conf
2493 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2494  "include" ];
2495
2496 if anyof (
2497     header :contains "list-id" "<emacs-devel.gnu.org>",
2498     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2499     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2500     header :contains "list-id" "<fencepost-users.gnu.org>",
2501     header :contains "list-id" "<guix-devel.gnu.org>",
2502     header :contains "list-id" "<guile-devel.gnu.org>",
2503     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2504     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2505     header :contains "list-id" "<www-commits.gnu.org>",
2506     header :contains "list-id" "<www-discuss.gnu.org>",
2507     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2508     header :contains "list-id" "<haskell-cafe.haskell.org>",
2509     header :contains "list-id" "<haskell-art.we.lurk.org>",
2510     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2511     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2512         set :lower "listname" "${1}";
2513         fileinto :create "l/${listname}";
2514     }
2515 }
2516
2517 if anyof (
2518     header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2519     header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2520     header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2521     header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2522     header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2523     if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2524         set :lower "username" "${1}";
2525         set :lower "listname" "${2}";
2526         fileinto :create "l/${username}/${listname}";
2527     }
2528 }
2529 #+end_src
2530
2531 ** polybar
2532
2533 *** config
2534 :PROPERTIES:
2535 :header-args+: :tangle ~/.config/polybar/config
2536 :END:
2537
2538 #+begin_src conf :tangle no
2539 ;=====================================================
2540 ;
2541 ;   To learn more about how to configure Polybar
2542 ;   go to https://github.com/jaagr/polybar
2543 ;
2544 ;   The README contains alot of information
2545 ;
2546 ;=====================================================
2547
2548 [colors]
2549 ;background = ${xrdb:color0:#222}
2550 background = #222
2551 background-alt = #444
2552 ;foreground = ${xrdb:color7:#222}
2553 foreground = #eee
2554 foreground-alt = #888
2555 primary = #ffb52a
2556 secondary = #e60053
2557 alert = #bd2c40
2558
2559 [bar/main]
2560 ;monitor = ${env:MONITOR:HDMI-1}
2561 width = 100%
2562 height = 27
2563 ;offset-x = 1%
2564 ;offset-y = 1%
2565 radius = 3.0
2566 fixed-center = true
2567
2568 background = ${colors.background}
2569 foreground = ${colors.foreground}
2570
2571 line-size = 3
2572 line-color = #f00
2573
2574 border-size = 4
2575 border-color = #00000000
2576
2577 padding-left = 0
2578 padding-right = 2
2579
2580 module-margin-left = 2
2581 module-margin-right = 2
2582
2583 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2584 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2585 font-2 = Wuncon Siji:pixelsize=10;1
2586 font-3 = FontAwesome:pixelsize=10;1
2587
2588 modules-left = bspwm xwindow
2589 modules-center =
2590 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2591
2592 tray-position = right
2593 tray-padding = 1
2594 ;tray-transparent = true
2595 ;tray-background = #0063ff
2596 tray-maxsize = 18
2597
2598 wm-restack = bspwm
2599
2600 ;override-redirect = true
2601
2602 scroll-up = bspwm-desknext
2603 scroll-down = bspwm-deskprev
2604
2605 [module/xwindow]
2606 type = internal/xwindow
2607 label = %title:0:50:...%
2608
2609 [module/xkeyboard]
2610 type = internal/xkeyboard
2611 blacklist-0 = num lock
2612
2613 format-prefix = " "
2614 format-prefix-foreground = ${colors.foreground-alt}
2615 format-prefix-underline = ${colors.secondary}
2616
2617 label-layout = %layout%
2618 label-layout-underline = ${colors.secondary}
2619
2620 label-indicator-padding = 2
2621 label-indicator-margin = 1
2622 label-indicator-background = ${colors.secondary}
2623 label-indicator-underline = ${colors.secondary}
2624
2625 [module/filesystem]
2626 type = internal/fs
2627 interval = 25
2628
2629 mount-0 = /
2630
2631 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2632 label-unmounted = %mountpoint% not mounted
2633 label-unmounted-foreground = ${colors.foreground-alt}
2634
2635 [module/bspwm]
2636 type = internal/bspwm
2637
2638 label-focused = %index%
2639 label-focused-background = ${colors.background-alt}
2640 label-focused-underline= ${colors.primary}
2641 label-focused-padding = 2
2642
2643 label-occupied = %index%
2644 label-occupied-padding = 2
2645
2646 label-urgent = %index%!
2647 label-urgent-background = ${colors.alert}
2648 label-urgent-padding = 2
2649
2650 label-empty = %index%
2651 label-empty-foreground = ${colors.foreground-alt}
2652 label-empty-padding = 2
2653
2654 [module/i3]
2655 type = internal/i3
2656 format = <label-state> <label-mode>
2657 index-sort = true
2658 wrapping-scroll = false
2659
2660 ; Only show workspaces on the same output as the bar
2661 ;pin-workspaces = true
2662
2663 label-mode-padding = 2
2664 label-mode-foreground = #000
2665 label-mode-background = ${colors.primary}
2666
2667 ; focused = Active workspace on focused monitor
2668 label-focused = %index%
2669 label-focused-background = ${module/bspwm.label-focused-background}
2670 label-focused-underline = ${module/bspwm.label-focused-underline}
2671 label-focused-padding = ${module/bspwm.label-focused-padding}
2672
2673 ; unfocused = Inactive workspace on any monitor
2674 label-unfocused = %index%
2675 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2676
2677 ; visible = Active workspace on unfocused monitor
2678 label-visible = %index%
2679 label-visible-background = ${self.label-focused-background}
2680 label-visible-underline = ${self.label-focused-underline}
2681 label-visible-padding = ${self.label-focused-padding}
2682
2683 ; urgent = Workspace with urgency hint set
2684 label-urgent = %index%
2685 label-urgent-background = ${module/bspwm.label-urgent-background}
2686 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2687
2688 [module/mpd]
2689 type = internal/mpd
2690 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2691
2692 icon-prev = 
2693 icon-stop = 
2694 icon-play = 
2695 icon-pause = 
2696 icon-next = 
2697
2698 label-song-maxlen = 25
2699 label-song-ellipsis = true
2700
2701 [module/xbacklight]
2702 type = internal/xbacklight
2703
2704 format = <label> <bar>
2705 label = BL
2706
2707 bar-width = 10
2708 bar-indicator = |
2709 bar-indicator-foreground = #ff
2710 bar-indicator-font = 2
2711 bar-fill = ─
2712 bar-fill-font = 2
2713 bar-fill-foreground = #9f78e1
2714 bar-empty = ─
2715 bar-empty-font = 2
2716 bar-empty-foreground = ${colors.foreground-alt}
2717
2718 [module/backlight-acpi]
2719 inherit = module/xbacklight
2720 type = internal/backlight
2721 ;card = intel_backlight
2722 card = mba6x_backlight
2723
2724 [module/cpu]
2725 type = internal/cpu
2726 interval = 2
2727 format-prefix = " "
2728 format-prefix-foreground = ${colors.foreground-alt}
2729 format-underline = #f90000
2730 label = %percentage%%
2731
2732 [module/memory]
2733 type = internal/memory
2734 interval = 2
2735 format-prefix = " "
2736 format-prefix-foreground = ${colors.foreground-alt}
2737 format-underline = #4bffdc
2738 label = %percentage_used%%
2739
2740 [module/wlan]
2741 type = internal/network
2742 interface =
2743 interval = 3.0
2744
2745 format-connected = <ramp-signal> <label-connected>
2746 format-connected-underline = #9f78e1
2747 label-connected = %essid%
2748
2749 format-disconnected =
2750 ;format-disconnected = <label-disconnected>
2751 ;format-disconnected-underline = ${self.format-connected-underline}
2752 ;label-disconnected = %ifname% disconnected
2753 ;label-disconnected-foreground = ${colors.foreground-alt}
2754
2755 ramp-signal-0 = 
2756 ramp-signal-1 = 
2757 ramp-signal-2 = 
2758 ramp-signal-3 = 
2759 ramp-signal-4 = 
2760 ramp-signal-foreground = ${colors.foreground-alt}
2761
2762 [module/eth]
2763 type = internal/network
2764 interface =
2765 interval = 3.0
2766
2767 format-connected-underline = #55aa55
2768 format-connected-prefix = " "
2769 format-connected-prefix-foreground = ${colors.foreground-alt}
2770 label-connected = %local_ip%
2771
2772 format-disconnected =
2773 ;format-disconnected = <label-disconnected>
2774 ;format-disconnected-underline = ${self.format-connected-underline}
2775 ;label-disconnected = %ifname% disconnected
2776 ;label-disconnected-foreground = ${colors.foreground-alt}
2777
2778 [module/date]
2779 type = internal/date
2780 interval = 5
2781
2782 date =
2783 date-alt = " %Y-%m-%d"
2784
2785 time = %H:%M
2786 time-alt = %H:%M:%S
2787
2788 format-prefix = 
2789 format-prefix-foreground = ${colors.foreground-alt}
2790 format-underline = #0a6cf5
2791
2792 label = %date% %time%
2793
2794 [module/volume]
2795 type = internal/volume
2796
2797 format-volume = <label-volume> <bar-volume>
2798 label-volume = vol
2799 label-volume-foreground = ${root.foreground}
2800
2801 format-muted-prefix = " "
2802 format-muted-foreground = ${colors.foreground-alt}
2803 label-muted = mute
2804
2805 bar-volume-width = 10
2806 bar-volume-foreground-0 = #55aa55
2807 bar-volume-foreground-1 = #55aa55
2808 bar-volume-foreground-2 = #55aa55
2809 bar-volume-foreground-3 = #55aa55
2810 bar-volume-foreground-4 = #55aa55
2811 bar-volume-foreground-5 = #f5a70a
2812 bar-volume-foreground-6 = #ff5555
2813 bar-volume-gradient = false
2814 bar-volume-indicator = |
2815 bar-volume-indicator-font = 2
2816 bar-volume-fill = ─
2817 bar-volume-fill-font = 2
2818 bar-volume-empty = ─
2819 bar-volume-empty-font = 2
2820 bar-volume-empty-foreground = ${colors.foreground-alt}
2821
2822 [module/battery]
2823 type = internal/battery
2824 battery = BAT0
2825 adapter = ADP1
2826 full-at = 64
2827
2828 format-charging = <animation-charging> <label-charging>
2829 format-charging-underline = #ffb52a
2830
2831 format-discharging = <ramp-capacity> <label-discharging>
2832 format-discharging-underline = ${self.format-charging-underline}
2833
2834 format-full-prefix = " "
2835 format-full-prefix-foreground = ${colors.foreground-alt}
2836 format-full-underline = ${self.format-charging-underline}
2837
2838 ramp-capacity-0 = 
2839 ramp-capacity-1 = 
2840 ramp-capacity-2 = 
2841 ramp-capacity-foreground = ${colors.foreground-alt}
2842
2843 animation-charging-0 = 
2844 animation-charging-1 = 
2845 animation-charging-2 = 
2846 animation-charging-foreground = ${colors.foreground-alt}
2847 animation-charging-framerate = 750
2848
2849 [module/temperature]
2850 type = internal/temperature
2851 thermal-zone = 1
2852 warn-temperature = 66
2853
2854 format = <ramp> <label>
2855 format-underline = #f50a4d
2856 format-warn = <ramp> <label-warn>
2857 format-warn-underline = ${self.format-underline}
2858
2859 label = %temperature%
2860 label-warn = %temperature%
2861 label-warn-foreground = ${colors.secondary}
2862
2863 ramp-0 = 
2864 ramp-1 = 
2865 ramp-2 = 
2866 ramp-foreground = ${colors.foreground-alt}
2867
2868 [module/powermenu]
2869 type = custom/menu
2870
2871 format-spacing = 1
2872
2873 label-open = 
2874 label-open-foreground = ${colors.secondary}
2875 label-close =  cancel
2876 label-close-foreground = ${colors.secondary}
2877 label-separator = |
2878 label-separator-foreground = ${colors.foreground-alt}
2879
2880 menu-0-0 = reboot
2881 menu-0-0-exec = menu-open-1
2882 menu-0-1 = power off
2883 menu-0-1-exec = menu-open-2
2884
2885 menu-1-0 = cancel
2886 menu-1-0-exec = menu-open-0
2887 menu-1-1 = reboot
2888 menu-1-1-exec = sudo reboot
2889
2890 menu-2-0 = power off
2891 menu-2-0-exec = sudo poweroff
2892 menu-2-1 = cancel
2893 menu-2-1-exec = menu-open-0
2894
2895 [module/mail]
2896 type = custom/script
2897 interval = 60
2898 format = <label>
2899 format-prefix = " "
2900 format-prefix-foreground = ${colors.foreground-alt}
2901 format-underline = #0a6cf5
2902 exec = notmuch count tag:unread
2903
2904 [settings]
2905 screenchange-reload = true
2906 ;compositing-background = xor
2907 ;compositing-background = screen
2908 ;compositing-foreground = source
2909 ;compositing-border = over
2910
2911 [global/wm]
2912 margin-top = 0
2913 margin-bottom = 0
2914
2915 ; vim:ft=dosini
2916 #+end_src
2917
2918 *** polybar-launch
2919 :PROPERTIES:
2920 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2921 :END:
2922
2923 #+begin_src sh :tangle no
2924 # Terminate already running bar instances
2925 killall -q polybar
2926
2927 # Wait until the processes have been shut down
2928 while pgrep -x polybar >/dev/null; do sleep 1; done
2929
2930 # Launch main bar
2931 polybar main &
2932
2933 echo "Bars launched..."
2934 #+end_src
2935
2936 ** PowerTOP
2937 :PROPERTIES:
2938 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2939 :END:
2940
2941 #+begin_src conf
2942 [Unit]
2943 Description=Powertop tunings
2944
2945 [Service]
2946 ExecStart=/usr/bin/powertop --auto-tune
2947 RemainAfterExit=true
2948
2949 [Install]
2950 WantedBy=multi-user.target
2951 #+end_src
2952
2953 ** ranger
2954
2955 *** rc.conf
2956 :PROPERTIES:
2957 :header-args+: :tangle ~/.config/ranger/rc.conf
2958 :END:
2959
2960 #+begin_src conf :tangle no
2961 # ===================================================================
2962 # This file contains the default startup commands for ranger.
2963 # To change them, it is recommended to create the file
2964 # ~/.config/ranger/rc.conf and add your custom commands there.
2965 #
2966 # If you copy this whole file there, you may want to set the environment
2967 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2968 #
2969 # The purpose of this file is mainly to define keybindings and settings.
2970 # For running more complex python code, please create a plugin in "plugins/" or
2971 # a command in "commands.py".
2972 #
2973 # Each line is a command that will be run before the user interface
2974 # is initialized.  As a result, you can not use commands which rely
2975 # on the UI such as :delete or :mark.
2976 # ===================================================================
2977
2978 # ===================================================================
2979 # == Options
2980 # ===================================================================
2981
2982 # How many columns are there, and what are their relative widths?
2983 set column_ratios 1,3,4
2984
2985 # Which files should be hidden? (regular expression)
2986 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2987
2988 # Show hidden files? You can toggle this by typing 'zh'
2989 set show_hidden false
2990
2991 # Ask for a confirmation when running the "delete" command?
2992 # Valid values are "always" (default), "never", "multiple"
2993 # With "multiple", ranger will ask only if you delete multiple files at once.
2994 set confirm_on_delete multiple
2995
2996 # Which script is used to generate file previews?
2997 # ranger ships with scope.sh, a script that calls external programs (see
2998 # README for dependencies) to preview images, archives, etc.
2999 set preview_script ~/.config/ranger/scope.sh
3000
3001 # Use the external preview script or display simple plain text previews?
3002 set use_preview_script true
3003
3004 # Open all images in this directory when running certain image viewers
3005 # like feh or sxiv?  You can still open selected files by marking them.
3006 set open_all_images true
3007
3008 # Be aware of version control systems and display information.
3009 set vcs_aware false
3010
3011 # State of the three backends git, hg, bzr. The possible states are
3012 # disabled, local (only show local info), enabled (show local and remote
3013 # information).
3014 set vcs_backend_git enabled
3015 set vcs_backend_hg disabled
3016 set vcs_backend_bzr disabled
3017
3018 # Preview images in full color with the external command "w3mimgpreview"?
3019 # This requires the console web browser "w3m" and a supported terminal.
3020 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3021 set preview_images true
3022
3023 # Use a unicode "..." character to mark cut-off filenames?
3024 set unicode_ellipsis false
3025
3026 # Show dotfiles in the bookmark preview box?
3027 set show_hidden_bookmarks true
3028
3029 # Which colorscheme to use?  These colorschemes are available by default:
3030 # default, jungle, snow
3031 set colorscheme default
3032
3033 # Preview files on the rightmost column?
3034 # And collapse (shrink) the last column if there is nothing to preview?
3035 set preview_files true
3036 set preview_directories true
3037 set collapse_preview true
3038
3039 # Save the console history on exit?
3040 set save_console_history true
3041
3042 # Draw the status bar on top of the browser window (default: bottom)
3043 set status_bar_on_top false
3044
3045 # Draw a progress bar in the status bar which displays the average state of all
3046 # currently running tasks which support progress bars?
3047 set draw_progress_bar_in_status_bar true
3048
3049 # Draw borders around columns?
3050 set draw_borders true
3051
3052 # Display the directory name in tabs?
3053 set dirname_in_tabs false
3054
3055 # Enable the mouse support?
3056 set mouse_enabled true
3057
3058 # Display the file size in the main column or status bar?
3059 set display_size_in_main_column true
3060 set display_size_in_status_bar true
3061
3062 # Display files tags in all columns or only in main column?
3063 set display_tags_in_all_columns true
3064
3065 # Set a title for the window?
3066 set update_title false
3067
3068 # Set the title to "ranger" in the tmux program?
3069 set update_tmux_title false
3070
3071 # Shorten the title if it gets long?  The number defines how many
3072 # directories are displayed at once, 0 turns off this feature.
3073 set shorten_title 3
3074
3075 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3076 set tilde_in_titlebar false
3077
3078 # How many directory-changes or console-commands should be kept in history?
3079 set max_history_size 20
3080 set max_console_history_size 50
3081
3082 # Try to keep so much space between the top/bottom border when scrolling:
3083 set scroll_offset 8
3084
3085 # Flush the input after each key hit?  (Noticable when ranger lags)
3086 set flushinput true
3087
3088 # Padding on the right when there's no preview?
3089 # This allows you to click into the space to run the file.
3090 set padding_right true
3091
3092 # Save bookmarks (used with mX and `X) instantly?
3093 # This helps to synchronize bookmarks between multiple ranger
3094 # instances but leads to *slight* performance loss.
3095 # When false, bookmarks are saved when ranger is exited.
3096 set autosave_bookmarks true
3097
3098 # You can display the "real" cumulative size of directories by using the
3099 # command :get_cumulative_size or typing "dc".  The size is expensive to
3100 # calculate and will not be updated automatically.  You can choose
3101 # to update it automatically though by turning on this option:
3102 set autoupdate_cumulative_size false
3103
3104 # Turning this on makes sense for screen readers:
3105 set show_cursor false
3106
3107 # One of: size, basename, mtime, type
3108 set sort natural
3109
3110 # Additional sorting options
3111 set sort_reverse false
3112 set sort_case_insensitive true
3113 set sort_directories_first true
3114
3115 # Enable this if key combinations with the Alt Key don't work for you.
3116 # (Especially on xterm)
3117 set xterm_alt_key false
3118
3119 # ===================================================================
3120 # == Local Options
3121 # ===================================================================
3122 # You can set local options that only affect a single directory.
3123
3124 # Examples:
3125 # setlocal path=~/downloads sort mtime
3126
3127 # ===================================================================
3128 # == Command Aliases in the Console
3129 # ===================================================================
3130
3131 alias e    edit
3132 alias q    quit
3133 alias q!   quitall
3134 alias qall quitall
3135 alias setl setlocal
3136
3137 alias filter     scout -prt
3138 alias find       scout -aet
3139 alias mark       scout -mr
3140 alias unmark     scout -Mr
3141 alias search     scout -rs
3142 alias search_inc scout -rts
3143 alias travel     scout -aefiklst
3144
3145 # ===================================================================
3146 # == Define keys for the browser
3147 # ===================================================================
3148
3149 # Basic
3150 map     Q quit!
3151 map     q quit
3152 copymap q ZZ ZQ
3153
3154 map R     reload_cwd
3155 map <C-r> reset
3156 map <C-l> redraw_window
3157 map <C-c> abort
3158 map <esc> change_mode normal
3159
3160 map i display_file
3161 map ? help
3162 map W display_log
3163 map w taskview_open
3164 map S shell $SHELL
3165
3166 map :  console
3167 map ;  console
3168 map !  console shell
3169 map @  console -p6 shell  %%s
3170 map #  console shell -p
3171 map s  console shell
3172 map r  chain draw_possible_programs; console open_with
3173 map f  console find
3174 map cd console cd
3175
3176 # Tagging / Marking
3177 map t       tag_toggle
3178 map ut      tag_remove
3179 map "<any>  tag_toggle tag=%any
3180 map <Space> mark_files toggle=True
3181 map v       mark_files all=True toggle=True
3182 map uv      mark_files all=True val=False
3183 map V       toggle_visual_mode
3184 map uV      toggle_visual_mode reverse=True
3185
3186 # For the nostalgics: Midnight Commander bindings
3187 map <F1> help
3188 map <F3> display_file
3189 map <F4> edit
3190 map <F5> copy
3191 map <F6> cut
3192 map <F7> console mkdir
3193 map <F8> console delete
3194 map <F10> exit
3195
3196 # In case you work on a keyboard with dvorak layout
3197 map <UP>       move up=1
3198 map <DOWN>     move down=1
3199 map <LEFT>     move left=1
3200 map <RIGHT>    move right=1
3201 map <HOME>     move to=0
3202 map <END>      move to=-1
3203 map <PAGEDOWN> move down=1   pages=True
3204 map <PAGEUP>   move up=1     pages=True
3205 map <CR>       move right=1
3206 map <DELETE>   console delete
3207 map <INSERT>   console touch
3208
3209 # VIM-like
3210 copymap <UP>       k
3211 copymap <DOWN>     j
3212 copymap <LEFT>     h
3213 copymap <RIGHT>    l
3214 copymap <HOME>     gg
3215 copymap <END>      G
3216 copymap <PAGEDOWN> <C-F>
3217 copymap <PAGEUP>   <C-B>
3218
3219 map J  move down=0.5  pages=True
3220 map K  move up=0.5    pages=True
3221 copymap J <C-D>
3222 copymap K <C-U>
3223
3224 # Jumping around
3225 map H     history_go -1
3226 map L     history_go 1
3227 map ]     move_parent 1
3228 map [     move_parent -1
3229 map }     traverse
3230
3231 map gh cd ~
3232 map ge cd /etc
3233 map gu cd /usr
3234 map gd cd /dev
3235 map gl cd -r .
3236 map gL cd -r %f
3237 map go cd /opt
3238 map gv cd /var
3239 map gm cd /media
3240 map gM cd /mnt
3241 map gs cd /srv
3242 map gr cd /
3243 map gR eval fm.cd(ranger.RANGERDIR)
3244 map g/ cd /
3245 map g? cd /usr/share/doc/ranger
3246
3247 # External Programs
3248 map E  edit
3249 map du shell -p du --max-depth=1 -h --apparent-size
3250 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3251 map yp shell -d echo -n %d/%f | xsel -i
3252 map yd shell -d echo -n %d    | xsel -i
3253 map yn shell -d echo -n %f    | xsel -i
3254
3255 # Filesystem Operations
3256 map =  chmod
3257
3258 map cw console rename
3259 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3260 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3261
3262 map pp paste
3263 map po paste overwrite=True
3264 map pl paste_symlink relative=False
3265 map pL paste_symlink relative=True
3266 map phl paste_hardlink
3267 map pht paste_hardlinked_subtree
3268
3269 map dd cut
3270 map ud uncut
3271 map da cut mode=add
3272 map dr cut mode=remove
3273
3274 map yy copy
3275 map uy uncut
3276 map ya copy mode=add
3277 map yr copy mode=remove
3278
3279 # Temporary workarounds
3280 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3281 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3282 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3283 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3284 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3285 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3286 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3287 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3288
3289 # Searching
3290 map /  console search
3291 map n  search_next
3292 map N  search_next forward=False
3293 map ct search_next order=tag
3294 map cs search_next order=size
3295 map ci search_next order=mimetype
3296 map cc search_next order=ctime
3297 map cm search_next order=mtime
3298 map ca search_next order=atime
3299
3300 # Tabs
3301 map <C-n>     tab_new ~
3302 map <C-w>     tab_close
3303 map <TAB>     tab_move 1
3304 map <S-TAB>   tab_move -1
3305 map <A-Right> tab_move 1
3306 map <A-Left>  tab_move -1
3307 map gt        tab_move 1
3308 map gT        tab_move -1
3309 map gn        tab_new ~
3310 map gc        tab_close
3311 map uq        tab_restore
3312 map <a-1>     tab_open 1
3313 map <a-2>     tab_open 2
3314 map <a-3>     tab_open 3
3315 map <a-4>     tab_open 4
3316 map <a-5>     tab_open 5
3317 map <a-6>     tab_open 6
3318 map <a-7>     tab_open 7
3319 map <a-8>     tab_open 8
3320 map <a-9>     tab_open 9
3321
3322 # Sorting
3323 map or toggle_option sort_reverse
3324 map os chain set sort=size;      set sort_reverse=False
3325 map ob chain set sort=basename;  set sort_reverse=False
3326 map on chain set sort=natural;   set sort_reverse=False
3327 map om chain set sort=mtime;     set sort_reverse=False
3328 map oc chain set sort=ctime;     set sort_reverse=False
3329 map oa chain set sort=atime;     set sort_reverse=False
3330 map ot chain set sort=type;      set sort_reverse=False
3331
3332 map oS chain set sort=size;      set sort_reverse=True
3333 map oB chain set sort=basename;  set sort_reverse=True
3334 map oN chain set sort=natural;   set sort_reverse=True
3335 map oM chain set sort=mtime;     set sort_reverse=True
3336 map oC chain set sort=ctime;     set sort_reverse=True
3337 map oA chain set sort=atime;     set sort_reverse=True
3338 map oT chain set sort=type;      set sort_reverse=True
3339
3340 map dc get_cumulative_size
3341
3342 # Settings
3343 map zc    toggle_option collapse_preview
3344 map zd    toggle_option sort_directories_first
3345 map zh    toggle_option show_hidden
3346 map <C-h> toggle_option show_hidden
3347 map zi    toggle_option flushinput
3348 map zm    toggle_option mouse_enabled
3349 map zp    toggle_option preview_files
3350 map zP    toggle_option preview_directories
3351 map zs    toggle_option sort_case_insensitive
3352 map zu    toggle_option autoupdate_cumulative_size
3353 map zv    toggle_option use_preview_script
3354 map zf    console filter
3355
3356 # Bookmarks
3357 map `<any>  enter_bookmark %any
3358 map '<any>  enter_bookmark %any
3359 map m<any>  set_bookmark %any
3360 map um<any> unset_bookmark %any
3361
3362 map m<bg>   draw_bookmarks
3363 copymap m<bg>  um<bg> `<bg> '<bg>
3364
3365 # Generate all the chmod bindings with some python help:
3366 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3367 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3368 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3369 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3370 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3371
3372 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3373 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3374 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3375 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3376 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3377
3378 # ===================================================================
3379 # == Define keys for the console
3380 # ===================================================================
3381 # Note: Unmapped keys are passed directly to the console.
3382
3383 # Basic
3384 cmap <tab>   eval fm.ui.console.tab()
3385 cmap <s-tab> eval fm.ui.console.tab(-1)
3386 cmap <ESC>   eval fm.ui.console.close()
3387 cmap <CR>    eval fm.ui.console.execute()
3388 cmap <C-l>   redraw_window
3389
3390 copycmap <ESC> <C-c>
3391 copycmap <CR>  <C-j>
3392
3393 # Move around
3394 cmap <up>    eval fm.ui.console.history_move(-1)
3395 cmap <down>  eval fm.ui.console.history_move(1)
3396 cmap <left>  eval fm.ui.console.move(left=1)
3397 cmap <right> eval fm.ui.console.move(right=1)
3398 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3399 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3400
3401 # Line Editing
3402 cmap <backspace>  eval fm.ui.console.delete(-1)
3403 cmap <delete>     eval fm.ui.console.delete(0)
3404 cmap <C-w>        eval fm.ui.console.delete_word()
3405 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3406 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3407 cmap <C-y>        eval fm.ui.console.paste()
3408
3409 # And of course the emacs way
3410 copycmap <up>        <C-p>
3411 copycmap <down>      <C-n>
3412 copycmap <left>      <C-b>
3413 copycmap <right>     <C-f>
3414 copycmap <home>      <C-a>
3415 copycmap <end>       <C-e>
3416 copycmap <delete>    <C-d>
3417 copycmap <backspace> <C-h>
3418
3419 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3420 # and <backspace2> (code 127).  To be sure, use both.
3421 copycmap <backspace> <backspace2>
3422
3423 # This special expression allows typing in numerals:
3424 cmap <allow_quantifiers> false
3425
3426 # ===================================================================
3427 # == Pager Keybindings
3428 # ===================================================================
3429
3430 # Movement
3431 pmap  <down>      pager_move  down=1
3432 pmap  <up>        pager_move  up=1
3433 pmap  <left>      pager_move  left=4
3434 pmap  <right>     pager_move  right=4
3435 pmap  <home>      pager_move  to=0
3436 pmap  <end>       pager_move  to=-1
3437 pmap  <pagedown>  pager_move  down=1.0  pages=True
3438 pmap  <pageup>    pager_move  up=1.0    pages=True
3439 pmap  <C-d>       pager_move  down=0.5  pages=True
3440 pmap  <C-u>       pager_move  up=0.5    pages=True
3441
3442 copypmap <UP>       k  <C-p>
3443 copypmap <DOWN>     j  <C-n> <CR>
3444 copypmap <LEFT>     h
3445 copypmap <RIGHT>    l
3446 copypmap <HOME>     g
3447 copypmap <END>      G
3448 copypmap <C-d>      d
3449 copypmap <C-u>      u
3450 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3451 copypmap <PAGEUP>   p  b  <C-B>
3452
3453 # Basic
3454 pmap     <ESC> pager_close
3455 copypmap <ESC> q Q i <F3>
3456 pmap E      edit_file
3457
3458 # ===================================================================
3459 # == Taskview Keybindings
3460 # ===================================================================
3461
3462 # Movement
3463 tmap <up>        taskview_move up=1
3464 tmap <down>      taskview_move down=1
3465 tmap <home>      taskview_move to=0
3466 tmap <end>       taskview_move to=-1
3467 tmap <pagedown>  taskview_move down=1.0  pages=True
3468 tmap <pageup>    taskview_move up=1.0    pages=True
3469 tmap <C-d>       taskview_move down=0.5  pages=True
3470 tmap <C-u>       taskview_move up=0.5    pages=True
3471
3472 copytmap <UP>       k  <C-p>
3473 copytmap <DOWN>     j  <C-n> <CR>
3474 copytmap <HOME>     g
3475 copytmap <END>      G
3476 copytmap <C-u>      u
3477 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3478 copytmap <PAGEUP>   p  b  <C-B>
3479
3480 # Changing priority and deleting tasks
3481 tmap J          eval -q fm.ui.taskview.task_move(-1)
3482 tmap K          eval -q fm.ui.taskview.task_move(0)
3483 tmap dd         eval -q fm.ui.taskview.task_remove()
3484 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3485 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3486 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3487
3488 # Basic
3489 tmap <ESC> taskview_close
3490 copytmap <ESC> q Q w <C-c>
3491 #+end_src
3492
3493 *** scope.sh
3494 :PROPERTIES:
3495 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3496 :END:
3497
3498 #+begin_src sh :tangle no
3499 # ranger supports enhanced previews.  If the option "use_preview_script"
3500 # is set to True and this file exists, this script will be called and its
3501 # output is displayed in ranger.  ANSI color codes are supported.
3502
3503 # NOTES: This script is considered a configuration file.  If you upgrade
3504 # ranger, it will be left untouched. (You must update it yourself.)
3505 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3506
3507 # Meanings of exit codes:
3508 # code | meaning    | action of ranger
3509 # -----+------------+-------------------------------------------
3510 # 0    | success    | success. display stdout as preview
3511 # 1    | no preview | failure. display no preview at all
3512 # 2    | plain text | display the plain content of the file
3513 # 3    | fix width  | success. Don't reload when width changes
3514 # 4    | fix height | success. Don't reload when height changes
3515 # 5    | fix both   | success. Don't ever reload
3516
3517 # Meaningful aliases for arguments:
3518 path="$1"    # Full path of the selected file
3519 width="$2"   # Width of the preview pane (number of fitting characters)
3520 height="$3"  # Height of the preview pane (number of fitting characters)
3521
3522 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3523
3524 # Find out something about the file:
3525 mimetype=$(file --mime-type -Lb "$path")
3526 extension=${path##*.}
3527
3528 # Functions:
3529 # runs a command and saves its output into $output.  Useful if you need
3530 # the return value AND want to use the output in a pipe
3531 try() { output=$(eval '"$@"'); }
3532
3533 # writes the output of the previouosly used "try" command
3534 dump() { echo "$output"; }
3535
3536 # a common post-processing function used after most commands
3537 trim() { head -n "$maxln"; }
3538
3539 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3540 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3541
3542 case "$extension" in
3543     # Archive extensions:
3544     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3545     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3546         try als "$path" && { dump | trim; exit 0; }
3547         try acat "$path" && { dump | trim; exit 3; }
3548         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3549         exit 1;;
3550     rar)
3551         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3552     # PDF documents:
3553     pdf)
3554         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3555             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3556     # BitTorrent Files
3557     torrent)
3558         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3559     # HTML Pages:
3560     htm|html|xhtml)
3561         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3562         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3563         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3564         ;; # fall back to highlight/cat if the text browsers fail
3565 esac
3566
3567 case "$mimetype" in
3568     # Syntax highlight for text files:
3569     text/* | */xml)
3570         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3571     # Ascii-previews of images:
3572     image/*)
3573         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3574     # Display information about media files:
3575     video/* | audio/*)
3576         exiftool "$path" && exit 5
3577         # Use sed to remove spaces so the output fits into the narrow window
3578         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3579 esac
3580
3581 exit 1
3582 #+end_src
3583
3584 ** redshift
3585 :PROPERTIES:
3586 :header-args+: :tangle ~/.config/redshift.conf :comments none
3587 :END:
3588
3589 #+begin_src conf
3590 ; Global settings for redshift
3591 [redshift]
3592 ; Set the day and night screen temperatures (Neutral is 6500K)
3593 ;temp-day=5700
3594 ;temp-night=3500
3595
3596 ;temp-day=6500
3597 temp-day=6200
3598 ;temp-night=4800
3599 ;temp-night=5000
3600 ;temp-night=4500
3601 temp-night=4000
3602
3603 ; Enable/Disable a smooth transition between day and night
3604 ; 0 will cause a direct change from day to night screen temperature.
3605 ; 1 will gradually increase or decrease the screen temperature.
3606 transition=1
3607
3608 ; Set the screen brightness. Default is 1.0.
3609 ;brightness=0.9
3610 ; It is also possible to use different settings for day and night
3611 ; since version 1.8.
3612 ;brightness-day=0.7
3613 ;brightness-night=0.4
3614 ; Set the screen gamma (for all colors, or each color channel
3615 ; individually)
3616 ;gamma=0.8
3617 ;gamma=1.0
3618 ;gamma=0.8:0.7:0.8
3619 ; This can also be set individually for day and night since
3620 ; version 1.10.
3621 ;gamma-day=0.8:0.7:0.8
3622 ;gamma-night=0.6
3623
3624 ; Set the location-provider: 'geoclue2' or 'manual'
3625 ; type 'redshift -l list' to see possible values.
3626 ; The location provider settings are in a different section.
3627 ;location-provider=manual
3628 location-provider=geoclue2
3629
3630 ; Set the adjustment-method: 'randr', 'vidmode'
3631 ; type 'redshift -m list' to see all possible values.
3632 ; 'randr' is the preferred method, 'vidmode' is an older API.
3633 ; but works in some cases when 'randr' does not.
3634 ; The adjustment method settings are in a different section.
3635 adjustment-method=randr
3636
3637 ; Configuration of the location-provider:
3638 ; type 'redshift -l PROVIDER:help' to see the settings.
3639 ; ex: 'redshift -l manual:help'
3640 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3641 ; are negative numbers.
3642 ;[manual]
3643 ;lat=48.1
3644 ;lon=11.6
3645
3646 ; Configuration of the adjustment-method
3647 ; type 'redshift -m METHOD:help' to see the settings.
3648 ; ex: 'redshift -m randr:help'
3649 ; In this example, randr is configured to adjust screen 1.
3650 ; Note that the numbering starts from 0, so this is actually the
3651 ; second screen. If this option is not specified, Redshift will try
3652 ; to adjust _all_ screens.
3653 ;[randr]
3654 ;screen=1
3655 #+end_src
3656
3657 ** rofi
3658 :PROPERTIES:
3659 :header-args+: :tangle ~/.config/rofi/config
3660 :END:
3661
3662 #+begin_src conf
3663 rofi.font: Ubuntu Mono 13
3664 ! rofi.font: Inconsolata 16
3665 ! rofi.font: Iosevka 13
3666 ! rofi.font: Source Code Pro 11
3667 rofi.modi: run,window
3668 ! rofi.width: 640
3669 rofi.width: 600
3670 !rofi.location: 2
3671 !rofi.yoffset: 200
3672 rofi.monitor: -1
3673 !rofi.lines: 10
3674
3675 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3676 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3677 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3678
3679 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3680 #+end_src
3681
3682 ** rofi-pass
3683 :PROPERTIES:
3684 :header-args+: :tangle ~/.config/rofi-pass/config
3685 :END:
3686
3687 #+begin_src conf
3688 # permanently set alternative root dir
3689 # root=/path/to/root
3690
3691 # rofi command. Make sure to have "$@" as last argument
3692 _rofi () {
3693     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3694     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3695 }
3696
3697 # xdotool needs the keyboard layout to be set using setxkbmap
3698 # You can do this in your autostart scripts (e.g. xinitrc)
3699
3700 # If for some reason, you cannot do this, you can set the command here.
3701 # and set fix_layout to true
3702 fix_layout=false
3703
3704 layout_cmd () {
3705   setxkbmap us
3706 }
3707
3708 # fields to be used
3709 URL_field='url'
3710 USERNAME_field='user'
3711 AUTOTYPE_field='autotype'
3712
3713 # delay to be used for :delay keyword
3714 delay=2
3715
3716 ## Programs to be used
3717 # Editor
3718 EDITOR='gvim -f'
3719
3720 # Browser
3721 BROWSER='chromium'
3722
3723 ## Misc settings
3724
3725 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3726 auto_enter='false'
3727 notify='false'
3728 default_autotype='user :tab pass'
3729
3730 # color of the help messages
3731 # leave empty for autodetection
3732 help_color="#4872FF"
3733
3734 # Clipboard settings
3735 # Possible options: primary, clipboard, both
3736 clip=primary
3737
3738 # Options for generating new password entries
3739 # default_user is also used for password files that have no user field.
3740 default_user=aminb
3741 default_user2=aminban
3742 password_length=30
3743
3744 # Custom Keybindings
3745 #autotype="Alt+1"
3746 autotype="Alt+m"
3747 type_user="Alt+2"
3748 type_pass="Alt+3"
3749 open_url="Alt+4"
3750 copy_name="Alt+u"
3751 copy_url="Alt+l"
3752 copy_pass="Alt+p"
3753 show="Alt+o"
3754 copy_entry="Alt+2"
3755 type_entry="Alt+1"
3756 copy_menu="Alt+c"
3757 action_menu="Alt+a"
3758 type_menu="Alt+t"
3759 help="Alt+h"
3760 switch="Alt+x"
3761 insert_pass="Alt+n"
3762 #+end_src
3763
3764 ** sway
3765 :PROPERTIES:
3766 :header-args+: :tangle ~/.config/sway/config
3767 :END:
3768
3769 #+begin_src conf
3770 exec xrdb .Xresources
3771 exec dunst
3772 ### Variables
3773 # super
3774 set $mod Mod4
3775 # alt
3776 set $mod2 Mod1
3777 set $left h
3778 set $down j
3779 set $up k
3780 set $right l
3781 set $term urxvt
3782 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3783
3784 ### Output configuration
3785 #
3786 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3787 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3788 #
3789 # Example configuration:
3790 #
3791 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
3792 #
3793 # You can get the names of your outputs by running: swaymsg -t get_outputs
3794
3795 ### Idle configuration
3796 #
3797 # Example configuration:
3798 #
3799 #exec swayidle \
3800 #    timeout 300 'swaylock -c 000000' \
3801 #    timeout 600 'swaymsg "output * dpms off"' \
3802 #       resume 'swaymsg "output * dpms on"' \
3803 #    before-sleep 'swaylock -c 000000'
3804 #
3805 # This will lock your screen after 300 seconds of inactivity, then turn off
3806 # your displays after another 600 seconds, and turn your screens back on when
3807 # resumed. It will also lock your screen before your computer goes to sleep.
3808
3809 ### Input configuration
3810
3811 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3812     dwt enabled
3813     tap enabled
3814     natural_scroll enabled
3815     middle_emulation enabled
3816     click_method clickfinger
3817 }
3818
3819 input "1:1:AT_Translated_Set_2_keyboard" {
3820     repeat_delay 200
3821     repeat_rate 45
3822     xkb_layout us,ir
3823     xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3824 }
3825
3826
3827 ### Key bindings
3828 #
3829 # Basics:
3830 #
3831     # start a terminal
3832     bindsym $mod+Return exec $term
3833
3834     # kill focused window
3835     bindsym $mod+Shift+q kill
3836
3837     # start your launcher
3838     bindsym $mod+d exec $menu
3839
3840     # password manager
3841     bindsym $mod2+space exec rofi-pass
3842
3843     # Drag floating windows by holding down $mod and left mouse button.
3844     # Resize them with right mouse button + $mod.
3845     # Despite the name, also works for non-floating windows.
3846     # Change normal to inverse to use left mouse button for resizing and right
3847     # mouse button for dragging.
3848     floating_modifier $mod normal
3849
3850     # reload the configuration file
3851     bindsym $mod+Shift+c reload
3852
3853     # exit sway (logs you out of your wayland session)
3854     bindsym $mod+Shift+e exit
3855
3856     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
3857     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
3858     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
3859
3860     bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3861     bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3862     bindsym XF86AudioMute exec pamixer --toggle-mute
3863     bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3864
3865     # original sway workspace switch and window move
3866     bindsym $mod+bracketleft workspace prev
3867     bindsym $mod+bracketright workspace next
3868     bindsym $mod+braceleft move container to workspace prev
3869     bindsym $mod+braceright move container to workspace next
3870
3871     # bspwm-esque workspace switch and window move
3872     bindsym $mod2+bracketleft exec sway-ws-util switch prev
3873     bindsym $mod2+bracketright exec sway-ws-util switch next
3874     bindsym $mod2+braceleft exec sway-ws-util move prev follow
3875     bindsym $mod2+braceright exec sway-ws-util move next follow
3876 #
3877 # Moving around:
3878 #
3879     # Move your focus around
3880     bindsym $mod+$left focus left
3881     bindsym $mod+$down focus down
3882     bindsym $mod+$up focus up
3883     bindsym $mod+$right focus right
3884     # or use $mod+[up|down|left|right]
3885     bindsym $mod+Left focus left
3886     bindsym $mod+Down focus down
3887     bindsym $mod+Up focus up
3888     bindsym $mod+Right focus right
3889
3890     # _move_ the focused window with the same, but add Shift
3891     bindsym $mod+Shift+$left move left
3892     bindsym $mod+Shift+$down move down
3893     bindsym $mod+Shift+$up move up
3894     bindsym $mod+Shift+$right move right
3895     # ditto, with arrow keys
3896     bindsym $mod+Shift+Left move left
3897     bindsym $mod+Shift+Down move down
3898     bindsym $mod+Shift+Up move up
3899     bindsym $mod+Shift+Right move right
3900 #
3901 # Workspaces:
3902 #
3903     # switch to workspace
3904     bindsym $mod+1 workspace 1
3905     bindsym $mod+2 workspace 2
3906     bindsym $mod+3 workspace 3
3907     bindsym $mod+4 workspace 4
3908     bindsym $mod+5 workspace 5
3909     bindsym $mod+6 workspace 6
3910     bindsym $mod+7 workspace 7
3911     bindsym $mod+8 workspace 8
3912     bindsym $mod+9 workspace 9
3913     bindsym $mod+0 workspace 10
3914     # move focused container to workspace
3915     bindsym $mod+Shift+1 move container to workspace 1
3916     bindsym $mod+Shift+2 move container to workspace 2
3917     bindsym $mod+Shift+3 move container to workspace 3
3918     bindsym $mod+Shift+4 move container to workspace 4
3919     bindsym $mod+Shift+5 move container to workspace 5
3920     bindsym $mod+Shift+6 move container to workspace 6
3921     bindsym $mod+Shift+7 move container to workspace 7
3922     bindsym $mod+Shift+8 move container to workspace 8
3923     bindsym $mod+Shift+9 move container to workspace 9
3924     bindsym $mod+Shift+0 move container to workspace 10
3925     # Note: workspaces can have any name you want, not just numbers.
3926     # We just use 1-10 as the default.
3927 #
3928 # Layout stuff:
3929 #
3930     # You can "split" the current object of your focus with
3931     # $mod+b or $mod+v, for horizontal and vertical splits
3932     # respectively.
3933     bindsym $mod+b splith
3934     bindsym $mod+v splitv
3935
3936     # Switch the current container between different layout styles
3937     bindsym $mod+s layout stacking
3938     bindsym $mod+w layout tabbed
3939     bindsym $mod+e layout toggle split
3940
3941     # Make the current focus fullscreen
3942     bindsym $mod+f fullscreen
3943
3944     # Toggle the current focus between tiling and floating mode
3945     bindsym $mod+Shift+space floating toggle
3946
3947     # Swap focus between the tiling area and the floating area
3948     bindsym $mod+space focus mode_toggle
3949
3950     # move focus to the parent container
3951     bindsym $mod+a focus parent
3952 #
3953 # Scratchpad:
3954 #
3955     # Sway has a "scratchpad", which is a bag of holding for windows.
3956     # You can send windows there and get them back later.
3957
3958     # Move the currently focused window to the scratchpad
3959     bindsym $mod+Shift+minus move scratchpad
3960
3961     # Show the next scratchpad window or hide the focused scratchpad window.
3962     # If there are multiple scratchpad windows, this command cycles through them.
3963     bindsym $mod+minus scratchpad show
3964 #
3965 # Resizing containers:
3966 #
3967 mode "resize" {
3968     # left will shrink the containers width
3969     # right will grow the containers width
3970     # up will shrink the containers height
3971     # down will grow the containers height
3972     bindsym $left resize shrink width 10px
3973     bindsym $down resize grow height 10px
3974     bindsym $up resize shrink height 10px
3975     bindsym $right resize grow width 10px
3976
3977     # ditto, with arrow keys
3978     bindsym Left resize shrink width 10px
3979     bindsym Down resize grow height 10px
3980     bindsym Up resize shrink height 10px
3981     bindsym Right resize grow width 10px
3982
3983     # return to default mode
3984     bindsym Return mode "default"
3985     bindsym Escape mode "default"
3986 }
3987 bindsym $mod+Shift+r mode "resize"
3988
3989 #
3990 # Status Bar:
3991 #
3992 # Read `man 5 sway-bar` for more information about this section.
3993 bar {
3994     position bottom
3995     colors {
3996         statusline #ffffff
3997         background #323232
3998         inactive_workspace #32323200 #32323200 #5c5c5c
3999     }
4000     status_command i3status
4001 }
4002
4003 include /etc/sway/config.d/*
4004 #+end_src
4005
4006 ** TLP
4007
4008 *** TODO enigma
4009 *** archy
4010
4011 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "archy")) "/sudo::/etc/default/tlp")
4012 # ------------------------------------------------------------------------------
4013 # tlp - Parameters for power saving
4014 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4015
4016 # Hint: some features are disabled by default, remove the leading # to enable
4017 # them.
4018
4019 # Set to 0 to disable, 1 to enable TLP.
4020 TLP_ENABLE=1
4021
4022 # Operation mode when no power supply can be detected: AC, BAT.
4023 # Concerns some desktop and embedded hardware only.
4024 TLP_DEFAULT_MODE=AC
4025
4026 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4027 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4028 TLP_PERSISTENT_DEFAULT=0
4029
4030 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4031 # Non-zero value enables, zero disables laptop mode.
4032 DISK_IDLE_SECS_ON_AC=0
4033 DISK_IDLE_SECS_ON_BAT=2
4034
4035 # Dirty page values (timeouts in secs).
4036 MAX_LOST_WORK_SECS_ON_AC=15
4037 MAX_LOST_WORK_SECS_ON_BAT=60
4038
4039 # Hint: CPU parameters below are disabled by default, remove the leading #
4040 # to enable them, otherwise kernel default values are used.
4041
4042 # Select a CPU frequency scaling governor.
4043 # Intel Core i processor with intel_pstate driver:
4044 #   powersave(*), performance.
4045 # Older hardware with acpi-cpufreq driver:
4046 #   ondemand(*), powersave, performance, conservative, schedutil.
4047 # (*) is recommended.
4048 # Hint: use tlp-stat -p to show the active driver and available governors.
4049 # Important:
4050 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
4051 #   efficient for *almost all* workloads and therefore kernel and most
4052 #   distributions have chosen them as defaults. If you still want to change,
4053 #   you should know what you're doing! You *must* disable your distribution's
4054 #   governor settings or conflicts will occur.
4055 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4056 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4057
4058 # Set the min/max frequency available for the scaling governor.
4059 # Possible values strongly depend on your CPU. For available frequencies see
4060 # the output of tlp-stat -p.
4061 #CPU_SCALING_MIN_FREQ_ON_AC=0
4062 #CPU_SCALING_MAX_FREQ_ON_AC=0
4063 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4064 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4065
4066 # Set energy performance hints (HWP) for Intel P-state governor:
4067 #   performance, balance_performance, default, balance_power, power
4068 # Values are given in order of increasing power saving.
4069 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4070 CPU_HWP_ON_AC=balance_performance
4071 CPU_HWP_ON_BAT=balance_power
4072
4073 # Set Intel P-state performance: 0..100 (%).
4074 # Limit the max/min P-state to control the power dissipation of the CPU.
4075 # Values are stated as a percentage of the available performance.
4076 # Requires an Intel Core i processor with intel_pstate driver.
4077 #CPU_MIN_PERF_ON_AC=0
4078 #CPU_MAX_PERF_ON_AC=100
4079 #CPU_MIN_PERF_ON_BAT=0
4080 #CPU_MAX_PERF_ON_BAT=30
4081
4082 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4083 # Requires an Intel Core i processor.
4084 # Important:
4085 # - This may conflict with your distribution's governor settings
4086 # - A value of 1 does *not* activate boosting, it just allows it
4087 #CPU_BOOST_ON_AC=1
4088 #CPU_BOOST_ON_BAT=0
4089
4090 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4091 #   0=disable, 1=enable.
4092 SCHED_POWERSAVE_ON_AC=0
4093 SCHED_POWERSAVE_ON_BAT=1
4094
4095 # Kernel NMI Watchdog:
4096 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4097 NMI_WATCHDOG=0
4098
4099 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4100 # Frequency voltage pairs are written to:
4101 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4102 # CAUTION: only use this, if you thoroughly understand what you are doing!
4103 #PHC_CONTROLS="F:V F:V F:V F:V"
4104
4105 # Set CPU performance versus energy savings policy:
4106 #   performance, balance-performance, default, balance-power, power.
4107 # Values are given in order of increasing power saving.
4108 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4109 ENERGY_PERF_POLICY_ON_AC=performance
4110 ENERGY_PERF_POLICY_ON_BAT=balance-power
4111
4112 # Disk devices; separate multiple devices with spaces (default: sda).
4113 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4114 DISK_DEVICES="sda sdb"
4115
4116 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4117 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4118 # Separate values for multiple disks with spaces. Use the special value 'keep'
4119 # to keep the hardware default for the particular disk.
4120 DISK_APM_LEVEL_ON_AC="254 254"
4121 DISK_APM_LEVEL_ON_BAT="128 128"
4122
4123 # Hard disk spin down timeout:
4124 #   0:        spin down disabled
4125 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4126 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4127 # See 'man hdparm' for details.
4128 # Separate values for multiple disks with spaces. Use the special value 'keep'
4129 # to keep the hardware default for the particular disk.
4130 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4131 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4132
4133 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4134 # Separate values for multiple disks with spaces. Use the special value 'keep'
4135 # to keep the kernel default scheduler for the particular disk.
4136 #DISK_IOSCHED="cfq cfq"
4137
4138 # AHCI link power management (ALPM) for disk devices:
4139 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4140 # (*) Kernel >= 4.15 required, then recommended.
4141 # Multiple values separated with spaces are tried sequentially until success.
4142 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4143 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4144
4145 # Exclude host devices from AHCI link power management.
4146 # Separate multiple hosts with spaces.
4147 #SATA_LINKPWR_BLACKLIST="host1"
4148
4149 # Runtime Power Management for AHCI host and disks devices:
4150 #   on=disable, auto=enable.
4151 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4152 #AHCI_RUNTIME_PM_ON_AC=on
4153 #AHCI_RUNTIME_PM_ON_BAT=on
4154
4155 # Seconds of inactivity before disk is suspended.
4156 AHCI_RUNTIME_PM_TIMEOUT=15
4157
4158 # PCI Express Active State Power Management (PCIe ASPM):
4159 #   default, performance, powersave.
4160 PCIE_ASPM_ON_AC=performance
4161 PCIE_ASPM_ON_BAT=powersave
4162
4163 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4164 # auto = mid on BAT, high on AC; default = use hardware defaults.
4165 RADEON_POWER_PROFILE_ON_AC=high
4166 RADEON_POWER_PROFILE_ON_BAT=low
4167
4168 # Radeon dynamic power management method (DPM): battery, performance.
4169 RADEON_DPM_STATE_ON_AC=performance
4170 RADEON_DPM_STATE_ON_BAT=battery
4171
4172 # Radeon DPM performance level: auto, low, high; auto is recommended.
4173 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4174 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4175
4176 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4177 WIFI_PWR_ON_AC=off
4178 WIFI_PWR_ON_BAT=on
4179
4180 # Disable wake on LAN: Y/N.
4181 WOL_DISABLE=Y
4182
4183 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4184 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4185 SOUND_POWER_SAVE_ON_AC=0
4186 SOUND_POWER_SAVE_ON_BAT=0
4187
4188 # Disable controller too (HDA only): Y/N.
4189 SOUND_POWER_SAVE_CONTROLLER=N
4190
4191 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4192 # Drive can be powered on again by releasing (and reinserting) the eject lever
4193 # or by pressing the disc eject button on newer models.
4194 # Note: an UltraBay/MediaBay hard disk is never powered off.
4195 BAY_POWEROFF_ON_AC=0
4196 BAY_POWEROFF_ON_BAT=0
4197 # Optical drive device to power off (default sr0).
4198 BAY_DEVICE="sr0"
4199
4200 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4201 RUNTIME_PM_ON_AC=on
4202 RUNTIME_PM_ON_BAT=auto
4203
4204 # Exclude PCI(e) device adresses the following list from Runtime PM
4205 # (separate with spaces). Use lspci to get the adresses (1st column).
4206 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4207 RUNTIME_PM_BLACKLIST="01:00.0"
4208
4209 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4210 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4211 # prevents accidential power-on of dGPU in hybrid graphics setups.
4212 # Use "" to disable the feature completely.
4213 # Separate multiple drivers with spaces.
4214 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4215
4216 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4217 USB_AUTOSUSPEND=1
4218
4219 # Exclude listed devices from USB autosuspend (separate with spaces).
4220 # Use lsusb to get the ids.
4221 # Note: input devices (usbhid) are excluded automatically
4222 #USB_BLACKLIST="1111:2222 3333:4444"
4223
4224 # Bluetooth devices are excluded from USB autosuspend:
4225 #   0=do not exclude, 1=exclude.
4226 USB_BLACKLIST_BTUSB=0
4227
4228 # Phone devices are excluded from USB autosuspend:
4229 #   0=do not exclude, 1=exclude (enable charging).
4230 USB_BLACKLIST_PHONE=0
4231
4232 # Printers are excluded from USB autosuspend:
4233 #   0=do not exclude, 1=exclude.
4234 USB_BLACKLIST_PRINTER=1
4235
4236 # WWAN devices are excluded from USB autosuspend:
4237 #   0=do not exclude, 1=exclude.
4238 USB_BLACKLIST_WWAN=1
4239
4240 # Include listed devices into USB autosuspend even if already excluded
4241 # by the blacklists above (separate with spaces).
4242 # Use lsusb to get the ids.
4243 #USB_WHITELIST="1111:2222 3333:4444"
4244
4245 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4246 # (workaround for USB devices that cause shutdown problems).
4247 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4248
4249 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4250 # on system startup: 0=disable, 1=enable.
4251 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4252 #   are ignored when this is enabled!
4253 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4254 RESTORE_DEVICE_STATE_ON_STARTUP=1
4255
4256 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4257 # Separate multiple devices with spaces.
4258 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4259
4260 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4261 # Separate multiple devices with spaces.
4262 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4263
4264 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4265 # (workaround for devices that are blocking shutdown).
4266 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4267
4268 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4269 # (to prevent other operating systems from missing radios).
4270 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4271
4272 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4273 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4274
4275 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4276 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4277
4278 # Radio devices to disable on battery when not in use (not connected):
4279 #   bluetooth, wifi, wwan.
4280 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4281
4282 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4283 # required). Charging starts when the remaining capacity falls below the
4284 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4285 # Main / Internal battery (values in %)
4286 #START_CHARGE_THRESH_BAT0=75
4287 #STOP_CHARGE_THRESH_BAT0=80
4288 # Ultrabay / Slice / Replaceable battery (values in %)
4289 #START_CHARGE_THRESH_BAT1=75
4290 #STOP_CHARGE_THRESH_BAT1=80
4291
4292 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4293 #RESTORE_THRESHOLDS_ON_BAT=1
4294
4295 # ------------------------------------------------------------------------------
4296 # tlp-rdw - Parameters for the radio device wizard
4297 # Possible devices: bluetooth, wifi, wwan.
4298
4299 # Hints:
4300 # - Parameters are disabled by default, remove the leading # to enable them
4301 # - Separate multiple radio devices with spaces
4302
4303 # Radio devices to disable on connect.
4304 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4305 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4306 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4307
4308 # Radio devices to enable on disconnect.
4309 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4310 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4311 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4312
4313 # Radio devices to enable/disable when docked.
4314 #DEVICES_TO_ENABLE_ON_DOCK=""
4315 #DEVICES_TO_DISABLE_ON_DOCK=""
4316
4317 # Radio devices to enable/disable when undocked.
4318 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4319 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4320 #+end_src
4321
4322 ** X
4323
4324 *** xprofile
4325 :PROPERTIES:
4326 :header-args+: :tangle ~/.xprofile
4327 :END:
4328
4329 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4330 contrary, it's automatically sourced by LightDM, my display manager of
4331 choice.
4332
4333 #+begin_src sh :tangle no
4334 xset -b  # disable bell
4335 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
4336
4337 # setxkbmap -option compose:ralt
4338
4339 setxkbmap -option ctrl:nocaps          # turn capslock into control
4340 setxkbmap -option altwin:swap_alt_win  # swap alt and super
4341
4342 if [ $(hostname) = "plasma" ]
4343 then
4344     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
4345 fi
4346
4347 if [ $(hostname) = "enigma" ]
4348 then
4349     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
4350 fi
4351
4352 light -Scrs "intel_backlight" 2
4353
4354 source $HOME/.zprofile
4355
4356 export _JAVA_AWT_WM_NONREPARENTING=1
4357 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4358
4359 if [ $(hostname) = "plasma" ]
4360 then
4361     unlock-def-gk.py &
4362 fi
4363
4364 bspwm &
4365 #+end_src
4366
4367 *** X resources
4368
4369 **** Xresources
4370 :PROPERTIES:
4371 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4372 :END:
4373
4374 #+begin_src conf-xdefaults
4375 #include ".Xresources.d/fonts"
4376 ! #include ".Xresources.d/colors"
4377 #include ".Xresources.d/emacs"
4378 #include ".Xresources.d/rxvt-unicode"
4379 #+end_src
4380
4381 **** Xresources.d
4382
4383 ***** fonts
4384 :PROPERTIES:
4385 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4386 :END:
4387
4388 #+begin_src conf-xdefaults
4389 Xft.lcdfilter: lcddefault
4390 Xft.antialias: true
4391 Xft.autohint: 0
4392 Xft.hinting: true
4393 Xft.hintstyle: hintslight
4394 ! Xft.hintstyle: hintfull
4395 Xft.rgba: rgb
4396 Xft.dpi: 96
4397 #+end_src
4398
4399 ***** colors
4400 :PROPERTIES:
4401 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4402 :END:
4403
4404 #+begin_src conf-xdefaults :tangle no
4405 #include "gruvbox-light.xresources"
4406 ! #include "gruvbox-dark.xresources"
4407 #include "gruvbox-urxvt256.xresources"
4408 #+end_src
4409
4410 #+begin_src conf-xdefaults :tangle no
4411 ! -----------------------------------------------------------------------------
4412 ! File: gruvbox-light.xresources
4413 ! Description: Retro groove colorscheme generalized
4414 ! Author: morhetz <morhetz@gmail.com>
4415 ! Source: https://github.com/morhetz/gruvbox-generalized
4416 ! Last Modified: 6 Sep 2014
4417 ! -----------------------------------------------------------------------------
4418
4419 ! hard contrast: *background: #f9f5d7
4420 *background: #fbf1c7
4421 ! soft contrast: *background: #f2e5bc
4422 *foreground: #3c3836
4423 ! Black + DarkGrey
4424 *color0:  #fdf4c1
4425 *color8:  #928374
4426 ! DarkRed + Red
4427 *color1:  #cc241d
4428 *color9:  #9d0006
4429 ! DarkGreen + Green
4430 *color2:  #98971a
4431 *color10: #79740e
4432 ! DarkYellow + Yellow
4433 *color3:  #d79921
4434 *color11: #b57614
4435 ! DarkBlue + Blue
4436 *color4:  #458588
4437 *color12: #076678
4438 ! DarkMagenta + Magenta
4439 *color5:  #b16286
4440 *color13: #8f3f71
4441 ! DarkCyan + Cyan
4442 *color6:  #689d6a
4443 *color14: #427b58
4444 ! LightGrey + White
4445 *color7:  #7c6f64
4446 *color15: #3c3836
4447 #+end_src
4448
4449 #+begin_src conf-xdefaults :tangle no
4450 ! -----------------------------------------------------------------------------
4451 ! File: gruvbox-dark.xresources
4452 ! Description: Retro groove colorscheme generalized
4453 ! Author: morhetz <morhetz@gmail.com>
4454 ! Source: https://github.com/morhetz/gruvbox-generalized
4455 ! Last Modified: 6 Sep 2014
4456 ! -----------------------------------------------------------------------------
4457
4458 ! hard contrast: *background: #1d2021
4459 *background: #282828
4460 ! soft contrast: *background: #32302f
4461 *foreground: #ebdbb2
4462 ! Black + DarkGrey
4463 *color0:  #282828
4464 *color8:  #928374
4465 ! DarkRed + Red
4466 *color1:  #cc241d
4467 *color9:  #fb4934
4468 ! DarkGreen + Green
4469 *color2:  #98971a
4470 *color10: #b8bb26
4471 ! DarkYellow + Yellow
4472 *color3:  #d79921
4473 *color11: #fabd2f
4474 ! DarkBlue + Blue
4475 *color4:  #458588
4476 *color12: #83a598
4477 ! DarkMagenta + Magenta
4478 *color5:  #b16286
4479 *color13: #d3869b
4480 ! DarkCyan + Cyan
4481 *color6:  #689d6a
4482 *color14: #8ec07c
4483 ! LightGrey + White
4484 *color7:  #a89984
4485 *color15: #ebdbb2
4486 #+end_src
4487
4488 #+begin_src conf-xdefaults :tangle no
4489 ! -----------------------------------------------------------------------------
4490 ! File: gruvbox-urxvt256.xresources
4491 ! Description: Retro groove colorscheme generalized
4492 ! Author: morhetz <morhetz@gmail.com>
4493 ! Source: https://github.com/morhetz/gruvbox-generalized
4494 ! Last Modified: 13 Dec 2013
4495 ! -----------------------------------------------------------------------------
4496
4497 URxvt.color24:  #076678
4498 URxvt.color66:  #427b58
4499 URxvt.color88:  #9d0006
4500 URxvt.color96:  #8f3f71
4501 URxvt.color100: #79740e
4502 URxvt.color108: #8ec07c
4503 URxvt.color109: #83a598
4504 URxvt.color130: #af3a03
4505 URxvt.color136: #b57614
4506 URxvt.color142: #b8bb26
4507 URxvt.color167: #fb4934
4508 URxvt.color175: #d3869b
4509 URxvt.color208: #fe8019
4510 URxvt.color214: #fabd2f
4511 URxvt.color223: #ebdbb2
4512 URxvt.color228: #f2e5bc
4513 URxvt.color229: #fbf1c7
4514 URxvt.color230: #f9f5d7
4515 URxvt.color234: #1d2021
4516 URxvt.color235: #282828
4517 URxvt.color236: #32302f
4518 URxvt.color237: #3c3836
4519 URxvt.color239: #504945
4520 URxvt.color241: #665c54
4521 URxvt.color243: #7c6f64
4522 URxvt.color244: #928374
4523 URxvt.color245: #928374
4524 URxvt.color246: #a89984
4525 URxvt.color248: #bdae93
4526 URxvt.color250: #d5c4a1
4527 #+end_src
4528
4529 ***** emacs
4530 :PROPERTIES:
4531 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4532 :END:
4533
4534 #+begin_src conf-xdefaults
4535 Emacs.menuBar: off
4536 Emacs.toolBar: off
4537 Emacs.verticalScrollBars: off
4538 Emacs.cursorBlink: off
4539 Emacs.FontBackend: xft,x
4540 ! Emacs.font: Ubuntu Mono-12
4541 ! Emacs.font: Triplicate T4C-11
4542 ! Emacs.font: Ubuntu Mono-10.5
4543 ! Emacs.font: Ubuntu Mono-12
4544 ! Emacs.font: Iosevka-11
4545
4546 ! Emacs.font: Fira Mono:size=15
4547 ! Emacs.font: DejaVu Sans Mono:size=15
4548 ! Emacs.font: Inconsolata:size=17
4549 ! Emacs.font: Inconsolata:size=16
4550 ! Emacs.font: Inconsolata LGC:size=14
4551 ! Emacs.font: Source Code Pro Medium-10.5
4552 Emacs.font: Ubuntu Mono:size=16
4553 ! Emacs.font: Iosevka:size=16
4554 #+end_src
4555
4556 ***** rxvt-unicode
4557 :PROPERTIES:
4558 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4559 :END:
4560
4561 #+begin_src conf-xdefaults
4562 ! Font
4563 URxvt.font:             xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4564 URxvt.boldFont:         xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4565 URxvt.italicFont:       xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4566 URxvt.bolditalicFont:   xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4567
4568 URxvt.xftAntialias:     true
4569 URxvt.letterSpace:      0
4570
4571 URxvt.depth:                0
4572 URxvt.loginShell:           true
4573 URxvt.saveLines:            100000
4574 URxvt.internalBorder:       3
4575 URxvt.lineSpace:            0
4576 URxvt.scrollBar:            false
4577 URxvt.scrollStyle:          rxvt
4578 URxvt*scrollTtyOutput:      false
4579 URxvt*scrollWithBuffer:     true
4580 URxvt*scrollTtyKeypress:    true
4581 URxvt.keysym.Shift-Up:      command:\033]720;1\007
4582 URxvt.keysym.Shift-Down:    command:\033]721;1\007
4583
4584 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
4585 URxvt.perl-ext:             bidi
4586 URxvt.bidi.enabled:         1
4587 URxvt.url-select.launcher:  firefox
4588 URxvt.url-select.underline: true
4589 URxvt.keysym.M-u:           perl:url-select:select_next
4590 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
4591 URxvt.keysym.M-s:           perl:keyboard-select:search
4592 URxvt.url-launcher:         /usr/bin/firefox
4593 URxvt.matcher.button:       1
4594 URxvt.iso14755:             false
4595 URxvt.iso14755_53:          false
4596 URxvt.keysym.M-c:           perl:clipboard:copy
4597 URxvt.keysym.M-v:           perl:clipboard:paste
4598 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
4599 URxvt.keysym.C-Up:          font-size:increase
4600 URxvt.keysym.C-Down:        font-size:decrease
4601 URxvt.keysym.C-S-Up:        font-size:incglobal
4602 URxvt.keysym.C-S-Down:      font-size:decglobal
4603 URxvt.keysym.C-equal:       font-size:reset
4604 !URxvt.keysym.C-question:   font-size:show
4605
4606 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4607
4608 !urxvt*foreground: white
4609 !urxvt*background: black
4610
4611 !*color0:  #2E3436
4612 !*color1:  #a40000
4613 !*color2:  #4E9A06
4614 !*color3:  #C4A000
4615 !*color4:  #3465A4
4616 !*color5:  #75507B
4617 !*color6:  #ce5c00
4618 !*color7:  #babdb9
4619 !*color8:  #555753
4620 !*color9:  #EF2929
4621 !*color10: #8AE234
4622 !*color11: #FCE94F
4623 !*color12: #729FCF
4624 !*color13: #AD7FA8
4625 !*color14: #fcaf3e
4626 !*color15: #EEEEEC
4627
4628 !URxvt.foreground: #C8C8C8
4629 !URxvt.background: #FFFFFF
4630
4631 !! black
4632 !*color0:  #2E3436
4633 !*color8:  #555753
4634 !! red
4635 !*color1:  #a40000
4636 !*color9:  #EF2929
4637 !! green
4638 !*color2:  #4E9A06
4639 !*color10: #8AE234
4640 !! yellow
4641 !*color3:  #C4A000
4642 !*color11: #FCE94F
4643 !! blue
4644 !*color4:  #3465A4
4645 !*color12: #729FCF
4646 !! purple
4647 !*color5:  #75507B
4648 !*color13: #AD7FA8
4649 !! orange (replaces cyan)
4650 !*color6:  #ce5c00
4651 !*color14: #fcaf3e
4652 !! white
4653 !*color7:  #babdb9
4654 !*color15: #EEEEEC
4655
4656 ! Tango colour theme for rxvt-unicode
4657 URxvt.background: #FFFFFF
4658 URxvt.foreground: #000000
4659
4660 ! Black
4661 URxvt.color0: #2E3436
4662 URxvt.color8: #757773
4663
4664 ! Red
4665 URxvt.color1: #CC0000
4666 URxvt.color9: #EF2929
4667
4668 ! Green
4669 URxvt.color2: #4E9A06
4670 URxvt.color10: #8AE234
4671
4672 ! Yellow
4673 URxvt.color3: #C4A000
4674 URxvt.color11: #FCE94F
4675
4676 ! Blue
4677 URxvt.color4: #3465A4
4678 URxvt.color12: #729FCF
4679
4680 ! Magenta
4681 URxvt.color5: #75507B
4682 URxvt.color13: #AD7FA8
4683
4684 !! Cyan
4685 !URxvt.color6: #06989A
4686 !URxvt.color14: #34E2E2
4687 ! orange (replaces cyan)
4688 *color6:  #ce5c00
4689 *color14: #fcaf3e
4690
4691 ! White
4692 URxvt.color7: #D3D7CF
4693 URxvt.color15: #EEEEEC
4694 #+end_src
4695
4696 ** XDG
4697 :PROPERTIES:
4698 :header-args+: :tangle ~/.config/user-dirs.dirs
4699 :END:
4700
4701 #+begin_src conf
4702 XDG_DESKTOP_DIR="$HOME/Desktop"
4703 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4704 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4705 XDG_MUSIC_DIR="$HOME/usr/music"
4706 XDG_PICTURES_DIR="$HOME/usr/pics"
4707 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4708 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4709 XDG_VIDEOS_DIR="$HOME/usr/vids"
4710 #+end_src
4711
4712 ** Zathura
4713 :PROPERTIES:
4714 :header-args+: :tangle ~/.config/zathura/zathurarc
4715 :END:
4716
4717 #+begin_src conf
4718 set smooth-scroll true
4719 set selection-clipboard clipboard
4720 set zoom-step 05
4721 set default-bg "#272727"
4722 set statusbar-bg "#272727"
4723 set inputbar-bg "#373737"
4724 #+end_src
4725
4726 ** Zsh
4727
4728 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4729 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4730 installed.
4731
4732 *** zimrc
4733 :PROPERTIES:
4734 :header-args+: :tangle ~/.zimrc
4735 :END:
4736
4737 #+begin_src sh
4738
4739
4740 #################
4741 # CORE SETTINGS #
4742 #################
4743
4744 #
4745 # Zim settings
4746 #
4747
4748 # Select what modules you would like enabled.
4749 # The second line of modules may depend on options set by modules in the first
4750 # line. These dependencies are noted on the respective module's README.md.
4751 zmodules=(directory environment git git-info history input ssh utility custom \
4752           syntax-highlighting history-substring-search prompt completion)
4753
4754
4755 ###################
4756 # MODULE SETTINGS #
4757 ###################
4758
4759 #
4760 # Prompt
4761 #
4762
4763 # Set your desired prompt here
4764 zprompt_theme='pure'
4765 #PURE_PROMPT_SYMBOL=λ
4766 #PURE_PROMPT_SYMBOL=δ
4767 PURE_PROMPT_SYMBOL=➜
4768
4769 #
4770 # Completion
4771 #
4772
4773 # set an optional host-specific filename for the completion cache file
4774 # if none is provided, the default '.zcompdump' is used.
4775 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4776
4777 #
4778 # Utility
4779 #
4780
4781 # Uncomment to enable command correction prompts
4782 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4783 setopt CORRECT
4784
4785 #
4786 # Environment
4787 #
4788
4789 # Set the string below to the desired terminal title format string.
4790 # The terminal title is redrawn upon directory change, however, variables like
4791 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4792 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4793 # The example below uses the following format: 'username@host:/current/directory'
4794 ztermtitle='%n@%m:%~'
4795
4796 #
4797 # Input
4798 #
4799
4800 # Uncomment to enable double-dot expansion.
4801 # This appends '../' to your input for each '.' you type after an initial '..'
4802 #zdouble_dot_expand='true'
4803
4804 #
4805 # Syntax-Highlighting
4806 #
4807
4808 # This determines what highlighters will be used with the syntax-highlighting module.
4809 # Documentation of the highlighters can be found here:
4810 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4811 # For (u)rxvt, termite and gnome-terminal users,
4812 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4813 #zhighlighters=(main brackets cursor)
4814 zhighlighters=(main brackets pattern)
4815
4816
4817 #
4818 # SSH
4819 #
4820
4821 # Load these ssh identities with the ssh module
4822 zssh_ids=(id_ed25519_amin)
4823
4824
4825 #
4826 # Pacman
4827 #
4828
4829 # Set (optional) pacman front-end.
4830 zpacman_frontend='yay'
4831
4832 # Load any helper scripts as defined here
4833 #zpacman_helper=(aur)
4834 #+end_src
4835
4836 *** zlogin
4837 :PROPERTIES:
4838 :header-args+: :tangle ~/.zlogin
4839 :END:
4840
4841 #+begin_src sh
4842
4843
4844 #
4845 # User configuration sourced by login shells
4846 #
4847
4848 # Initialize zim
4849 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4850 #+end_src
4851
4852 *** zprofile
4853 :PROPERTIES:
4854 :header-args+: :tangle ~/.zprofile
4855 :END:
4856
4857 #+begin_src sh
4858 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4859 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4860 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4861 export XDG_CONFIG_HOME=$HOME/.config
4862 export XDG_DATA_HOME=$HOME/.local/share
4863 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4864 export MAILDIR="$HOME/mail"
4865 export CVS_RSH=ssh
4866 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4867 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4868 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4869
4870 # Eiffel2Java stuff
4871 #export JAVA_HOME=/usr/lib/jvm/default
4872 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4873 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4874 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4875
4876 #export PATH="$HOME/usr/build/pvs:$PATH"
4877 #export SBCLISP_HOME=/usr/share/sbcl-source
4878 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4879
4880 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
4881
4882 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4883 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4884
4885 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4886 #+end_src
4887
4888 *** zshenv
4889 :PROPERTIES:
4890 :header-args+: :tangle ~/.zshenv
4891 :END:
4892
4893 #+begin_src sh
4894 # Ensure that a non-login, non-interactive shell has a defined environment.
4895 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4896   source "${ZDOTDIR:-$HOME}/.zprofile"
4897 fi
4898 #+end_src
4899
4900 *** zshrc
4901 :PROPERTIES:
4902 :header-args+: :tangle ~/.zshrc
4903 :END:
4904
4905 #+begin_src sh
4906 # Bash-like navigation
4907 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4908 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4909 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4910 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4911
4912 #disable -r time       # disable shell reserved word
4913 #alias time='time -p'  # -p for POSIX output
4914
4915 # rehash if last command was pacaur or pacman
4916 # (so that zsh picks up changes in $PATH immediately)
4917 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4918
4919 #
4920 # User configuration sourced by interactive shells
4921 #
4922
4923 # Change default zim location
4924 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4925
4926 # Start zim
4927 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4928
4929 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4930 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4931
4932 setopt globdots
4933
4934 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4935 source ~/.zsh/zsh-autopair/autopair.zsh
4936
4937
4938 ### fzf ###
4939
4940 source /usr/share/fzf/key-bindings.zsh
4941 source /usr/share/fzf/completion.zsh
4942
4943 # Accept history selection instead of putting it on
4944 # the command line
4945 fzf-history-widget-accept() {
4946   fzf-history-widget
4947   zle accept-line
4948 }
4949 #zle     -N   fzf-history-widget-accept
4950 #bindkey '^R' fzf-history-widget-accept
4951
4952 # alt+c preview
4953 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4954
4955 ### fzf ###
4956
4957
4958 # aliases
4959 alias mpv="mpv --ytdl-format mp4"
4960 alias mv="mv -iv"
4961 alias cp="cp -iv"
4962 alias scl=systemctl
4963 alias jcl=journalctl
4964 alias m="mbsync -Va; getmail; notmuch new"
4965 alias best="youtube-dl -f best"
4966 alias nixx="ssh amin@nix.aminb.org"
4967 alias fence="ssh aminb@fencepost.gnu.org"
4968
4969 aur() {
4970    cd ~/usr/build
4971    git clone https://aur.archlinux.org/${1}.git
4972    cd ${1}
4973 }
4974
4975 # i-beam cursor
4976 echo -e "\033[5 q"
4977 #echo -e "\033[6 q"
4978 #+end_src
4979
4980 * Scripts
4981
4982 This section contains various useful scripts and the ones used by the
4983 programs above. For instance, =toggle-tablet= for switching to and
4984 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4985 Xfce's presentation mode which keeps the screen awake, and
4986 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4987 exact brightness value.
4988
4989 ** battery-percentage-time
4990 :PROPERTIES:
4991 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
4992 :END:
4993
4994 #+begin_src sh :tangle no
4995 dbus_send() {
4996         label=$1
4997         dbus-send --print-reply=literal --system \
4998                 --dest=org.freedesktop.UPower \
4999                 /org/freedesktop/UPower/devices/battery_BAT0 \
5000                 org.freedesktop.DBus.Properties.Get \
5001                 string:org.freedesktop.UPower.Device \
5002                 string:"${label}" | awk '{print $3}'
5003 }
5004
5005 perc=$(dbus_send 'Percentage')
5006 state=$(dbus_send 'State')
5007
5008 if [ "$state" -eq 2 ]; then  # Discharging
5009         secs=$(dbus_send 'TimeToEmpty')
5010 elif [ "$state" -eq 1 ]; then  # Charging
5011         secs=$(dbus_send 'TimeToFull')
5012 fi
5013
5014 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5015 #+end_src
5016
5017 ** rofi-light
5018 :PROPERTIES:
5019 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5020 :END:
5021
5022 #+begin_src bash
5023 cur=$(light -G)
5024 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
5025 light -S $val
5026 #+end_src
5027
5028 ** s (run sway)
5029 :PROPERTIES:
5030 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5031 :END:
5032
5033 #+begin_src bash
5034 export _JAVA_AWT_WM_NONREPARENTING=1
5035 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5036 light -Scrs "intel_backlight" 2
5037 source $HOME/.zprofile
5038 sway
5039 #+end_src
5040
5041 ** sway-ws-util
5042 :PROPERTIES:
5043 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5044 :END:
5045
5046 #+begin_src bash
5047 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5048 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5049 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5050 dest_ws=-1
5051 op=-1
5052
5053 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5054   op="$1"
5055   if [ "$2" = "prev" ]; then
5056     dest_ws="$prev_ws"
5057   elif [ "$2" = "next" ]; then
5058     dest_ws="$next_ws"
5059   else
5060     echo "Usage: $0 $1 {prev|next} [follow]"
5061     exit 1
5062   fi
5063 else
5064   echo "Usage: $0 {switch|move} {prev|next} [follow]"
5065   exit 1
5066 fi
5067
5068 if [ "$op" = "switch" ]; then
5069   sway workspace "$dest_ws"
5070 elif [ "$op" = "move" ]; then
5071   sway move container to workspace "$dest_ws"
5072   if [ "$3" = "follow" ]; then
5073     sway workspace "$dest_ws"
5074   fi
5075 fi
5076 #+end_src
5077
5078 ** toggle-layout
5079 :PROPERTIES:
5080 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5081 :END:
5082
5083 #+begin_src bash :tangle no
5084 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5085
5086 if [ "$lang" = "us" ]; then
5087     setxkbmap ir
5088 else
5089     setxkbmap us
5090     # xmodmap $HOME/.Xmodmap
5091 fi
5092 #+end_src
5093
5094 ** toggle-presentation-mode
5095 :PROPERTIES:
5096 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5097 :END:
5098
5099 #+begin_src bash :tangle no
5100 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5101 #+end_src
5102
5103 ** toggle-tablet
5104 :PROPERTIES:
5105 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5106 :END:
5107
5108 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5109 a few things:
5110
5111 - rotates the screen using =xrandr=, so that rotating the physical
5112   display of my X220t would have the laptop's battery on the right
5113   hand side,
5114 - enables touch screen,
5115 - properly rotates the stylus pen and touch screen pointers, and
5116 - toggles between RGB and Vertical BGR sub-pixel order.
5117
5118 #+begin_src bash :tangle no
5119 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5120     0)  # Screen is not rotated, we should rotate it right (90°)
5121            xrandr -o 3
5122            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5123            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5124            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5125            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5126            ;;
5127     1)  # Currently top is rotated right, we should set it normal (0°)
5128           xrandr -o 0
5129           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5130           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5131           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5132           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5133           ;;
5134     *)
5135            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5136            exit 1
5137            ;;
5138 esac
5139 #+end_src
5140
5141 ** unlock-def-gk.py
5142 :PROPERTIES:
5143 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5144 :END:
5145
5146 #+begin_src python :tangle no
5147 import gnomekeyring as gk
5148 # list_item_ids_sync('login')[0] == 1L
5149 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5150 #+end_src
5151
5152 ** volume-info
5153 :PROPERTIES:
5154 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5155 :END:
5156
5157 #+begin_src sh :tangle no
5158 cur_vol=$(pamixer --get-volume)
5159
5160 if [ $(pamixer --get-mute) = true ]; then
5161   printf 'mt \n' "$cur_vol"
5162 else
5163   printf '%02d \n' "$cur_vol"
5164 fi
5165 #+end_src
5166
5167 ** wp
5168
5169 My little wallpaper changer script.
5170
5171 *** wp
5172 :PROPERTIES:
5173 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5174 :END:
5175
5176 #+begin_src bash :tangle no
5177 export DISPLAY=:0
5178
5179 case "$1" in
5180   "day")
5181     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5182     ;;
5183   "night")
5184     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5185     ;;
5186   *)
5187     echo $"Usage: $0 {day|night}"
5188     exit 1
5189 esac
5190 #+end_src
5191
5192 *** wp-auto
5193 :PROPERTIES:
5194 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5195 :END:
5196
5197 #+begin_src bash :tangle no
5198 SED=$(which sed)
5199 ROFI=$(which rofi)
5200
5201 export DISPLAY=:0
5202 HOUR=$(date +%H)
5203
5204 if [ -z "${SED}" ]
5205 then
5206     echo "Did not find 'sed', script cannot continue."
5207     exit 1
5208 fi
5209 if [ -z "${ROFI}" ]
5210 then
5211     echo "Did not find rofi, there is no point to continue."
5212     exit 1
5213 fi
5214
5215 ###
5216 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5217 # Repeated calls should leave the config clean-ish
5218 ###
5219 function set_theme()
5220 {
5221     CDIR="${HOME}/.config/rofi/"
5222     if [ ! -d "${CDIR}" ]
5223     then
5224         mkdir -p ${CDIR}
5225     fi
5226     if [ -f "${CDIR}/config" ]
5227     then
5228         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5229     fi
5230     echo "rofi.theme: ${1}" >> "${CDIR}/config"
5231
5232 }
5233
5234 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5235     then
5236         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5237         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5238         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5239     else
5240         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5241         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5242         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5243 fi
5244 #+end_src
5245
5246 *** wp.service
5247 :PROPERTIES:
5248 :header-args+: :tangle ~/.config/systemd/user/wp.service
5249 :END:
5250
5251 #+begin_src conf :tangle no
5252 [Unit]
5253 Description=wallpaper service
5254
5255 [Service]
5256 Type=oneshot
5257 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5258 #+end_src
5259
5260 *** wp.timer
5261 :PROPERTIES:
5262 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5263 :END:
5264
5265 #+begin_src conf :tangle no
5266 [Unit]
5267 [Unit]
5268 Description=wallpaper timer
5269
5270 [Timer]
5271 OnCalendar=07,21:00
5272 Unit=wp.service
5273 Persistent=true
5274
5275 [Install]
5276 WantedBy=timers.target
5277 #+end_src
5278
5279 ** zathura-sync.sh
5280 :PROPERTIES:
5281 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5282 :END:
5283
5284 #+begin_src sh
5285 pos="$1"
5286 pdffile="$2"
5287 zathura --synctex-forward "$pos" "$pdffile" || \
5288     (
5289     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5290     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5291 #+end_src
5292 ** Fun :)
5293
5294 *** eat-em
5295 :PROPERTIES:
5296 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5297 :END:
5298
5299 #+begin_src sh
5300 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5301 # [ESC] character in original post removed here.
5302
5303 # ANSI Color -- use these variables to easily have different color
5304 #    and format output. Make sure to output the reset sequence after
5305 #    colors (f = foreground, b = background), and use the 'off'
5306 #    feature for anything you turn on.
5307
5308 initializeANSI()
5309 {
5310  esc="$(echo -en '\e')"
5311
5312   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
5313   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
5314   cyanf="${esc}[36m";    whitef="${esc}[37m"
5315
5316   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
5317   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
5318   cyanb="${esc}[46m";    whiteb="${esc}[47m"
5319
5320   boldon="${esc}[1m";    boldoff="${esc}[22m"
5321   italicson="${esc}[3m"; italicsoff="${esc}[23m"
5322   ulon="${esc}[4m";      uloff="${esc}[24m"
5323   invon="${esc}[7m";     invoff="${esc}[27m"
5324
5325   reset="${esc}[0m"
5326 }
5327
5328 # note in this first use that switching colors doesn't require a reset
5329 # first - the new color overrides the old one.
5330
5331 #clear
5332
5333 initializeANSI
5334
5335 cat << EOF
5336
5337  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
5338  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5339  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5340  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
5341  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
5342  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
5343
5344  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
5345  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5346  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5347  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
5348  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
5349  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
5350
5351 EOF
5352 #+end_src
5353
5354 *** invade-em
5355 :PROPERTIES:
5356 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5357 :END:
5358
5359 #+begin_src bash
5360 #
5361 # ANSI color scheme script featuring Space Invaders
5362 #
5363 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5364 # Modified by lolilolicon
5365 #
5366
5367 f=3 b=4
5368 for j in f b; do
5369   for i in {0..7}; do
5370     printf -v $j$i %b "\e[${!j}${i}m"
5371   done
5372 done
5373 bld=$'\e[1m'
5374 rst=$'\e[0m'
5375
5376 cat << EOF
5377
5378  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5379  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5380  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
5381  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
5382
5383  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5384  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5385  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
5386  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
5387
5388
5389                                      $f7▌$rst
5390
5391                                    $f7▌$rst
5392
5393                               $f7    ▄█▄    $rst
5394                               $f7▄█████████▄$rst
5395                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5396
5397 EOF
5398 #+end_src