2 #+property: header-args :comments link :mkdirp yes :results silent
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
10 Note: This file is best viewed inside Emacs with org mode.
14 This section contains the configuration files (dotfiles) of various
17 ** [[https://github.com/afewmail/afew][afew]]
19 :header-args+: :tangle ~/.config/afew/config
23 an initial tagging script for notmuch mail
27 # This is the default filter chain
32 [ArchiveSentMailsFilter]
37 #query = 'folder:amin/lists/.haskell-cafe'
38 #tags = +lists;+lists/haskell-cafe
39 #message = lists/haskell-cafe
42 #query = 'folder:amin/lists/.haskell-weekly'
43 #tags = +lists;+lists/haskell-weekly
44 #message = lists/haskell-weekly
47 #query = 'folder:amin/lists/.hackernewsletter'
48 #tags = +lists;+lists/hackernewsletter
49 #message = lists/hackernewsletter
53 #folder_blacklist = Inbox
54 #maildir_separator = /.
55 #folder_transforms = Drafts:draft Junk:spam Trash:deleted Sent:sent Archive:archive lists/haskell-cafe:lists/haskell-cafe
62 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
70 sleep 0.5 && pasystray --notify=all &
72 bspc monitor -d I II III IV V VI VII VIII IX X
73 #bspc monitor eDP-1 -d I II III IV V
74 #bspc monitor HDMI-1 -d VI VII VIII IX X
76 #bspc config border_width 2
77 #bspc config window_gap 8
78 bspc config window_gap 0
80 bspc config bottom_padding 26
82 bspc config split_ratio 0.52
83 bspc config borderless_monocle true
84 bspc config gapless_monocle true
85 bspc config click_to_focus button1
86 bspc config directional_focus_tightness low
88 bspc rule -a Firefox desktop='^1' follow=on
89 bspc rule -a Nightly desktop='^1' follow=on
90 bspc rule -a Emacs desktop='^2' state=tiled follow=on
91 #bspc rule -a Chromium desktop='^4' follow=on
92 bspc rule -a URxvt state=floating
93 bspc rule -a URxvt:tiled state=tiled
94 bspc rule -a Connman-gtk state=floating
95 bspc rule -a Xfce4-panel state=floating
96 bspc rule -a TelegramDesktop state=floating
97 bspc rule -a Ec state=floating
98 bspc rule -a Pavucontrol state=floating
99 bspc rule -a Eog state=floating
100 bspc rule -a Seahorse state=floating
101 bspc rule -a mpv state=floating
102 bspc rule -a Evince state=floating
103 bspc rule -a Meld state=floating
104 bspc rule -a Autokey-gtk state=floating
105 bspc rule -a Mousepad state=floating
106 bspc rule -a Wrapper-1.0 state=floating
107 bspc rule -a File-roller state=floating
108 bspc rule -a Gnome-disks state=floating
109 bspc rule -a Termite state=floating
110 bspc rule -a Termite:tiled state=tiled
111 bspc rule -a Thunderbird:Calendar state=floating
112 bspc rule -a Audacity state=floating
113 bspc rule -a Proof state=floating # pvs x-show-proof
114 bspc rule -a Nm-connection-editor state=floating
115 bspc rule -a Wire state=floating
116 bspc rule -a discord state=floating
117 bspc rule -a X2goclient state=floating
118 bspc rule -a SimpleScreenRecorder state=floating
119 bspc rule -a Gimp state=floating
120 bspc rule -a Wrapper-2.0 state=floating
121 bspc rule -a Zathura state=tiled
126 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
131 # wm independent hotkeys
135 super + {_,shift} + Return
136 urxvt{_, -name tiled}
138 #super + {_,shift} + Return
139 # termite{_, --name=tiled}
143 rofi -show run -display-run '> ' -display-window ' 🗔 '
146 xfce4-popup-whiskermenu
150 rofi -show window -display-run '> ' -display-window ' 🗔 '
162 # chromium -incognito
168 # make sxhkd reload its configuration files:
173 XF86Audio{Raise,Lower}Volume
174 pamixer --allow-boost --{in,de}crease 5
178 pamixer --toggle-mute
181 XF86Audio{Play,Prev,Next}
182 mpc {toggle,prev,next}
186 light-locker-command -l
188 # Toggle keyboard layout
192 # Toggle Xfce presentation mode
194 toggle-presentation-mode
197 XF86MonBrightness{Up,Down}
203 # keyboard brightness
204 #XF86KbdBrightness{Up,Down}
211 # quit bspwm normally
219 # alternate between the tiled and monocle layout
223 # send the newest marked node to the newest preselected node
225 bspc node newest.marked.local -n newest.!automatic.local
227 # swap the current node and the biggest node
235 # set the window state
236 super + {t,shift + t,s,f}
237 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
240 super + ctrl + {m,x,y,z}
241 bspc node -g {marked,locked,sticky,private}
247 # focus the node in the given direction
248 super + {_,shift + }{h,j,k,l}
249 bspc node -{f,s} {west,south,north,east}
251 # focus the node for the given path jump
252 super + {p,b,comma,period}
253 bspc node -f @{parent,brother,first,second}
255 # focus the next/previous node in the current desktop
256 super + {_,shift + }c
257 bspc node -f {next,prev}.local
259 # focus the next/previous desktop in the current monitor
260 super + bracket{left,right}
261 bspc desktop -f {prev,next}.local
263 # send to next/prev desktop
264 super + shift + bracket{left,right}
265 bspc node -d {prev,next} --follow
267 # focus the last node/desktop
269 bspc {node,desktop} -f last
271 # focus the older or newer node in the focus history
274 bspc node {older,newer} -f; \
277 # focus or send to the given desktop
278 super + {_,shift + }{1-9,0}
279 bspc {desktop -f,node -d} '^{1-9,10}'
285 # preselect the direction
286 super + ctrl + {h,j,k,l}
287 bspc node -p {west,south,north,east}
289 # preselect the ratio
293 # cancel the preselection for the focused node
297 # cancel the preselection for the focused desktop
298 super + ctrl + shift + space
299 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
305 # expand a window by moving one of its side outward
306 super + alt + {h,j,k,l}
307 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
309 # contract a window by moving one of its side inward
310 super + alt + shift + {h,j,k,l}
311 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
313 # move a floating window
314 super + {Left,Down,Up,Right}
315 bspc node -v {-20 0,0 20,0 -20,20 0}
317 #alt + bracket{left,right}
318 # xdotool key --clearmodifiers ctrl+Page_{Up,Down}
323 :header-args+: :tangle ~/.config/compton.conf
328 shadow = false; # Enabled client-side shadows on windows.
329 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
330 no-dnd-shadow = true; # Don't draw shadows on DND windows.
331 clear-shadow = true; # Zero the part of the shadow's mask behind the
332 # window. Fix some weirdness with ARGB windows.
333 shadow-radius = 5; # The blur radius for shadows. (default 12)
334 shadow-offset-x = -5; # The left offset for shadows. (default -15)
335 shadow-offset-y = -5; # The top offset for shadows. (default -15)
336 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
337 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
338 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
339 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
340 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
341 # shadow-exclude = "n:e:Notification";
342 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
343 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
344 # (see also: --detect-rounded-corners)
347 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
348 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
349 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
350 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
351 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
352 # value of _NET_WM_OPACITY. Bad choice.
353 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
354 # it may result in less X resource usage,
355 # Yet fading may look bad.
356 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
357 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
358 # blur-background = true; # Blur background of transparent windows.
359 # Bad performance with X Render backend.
360 # GLX backend is preferred.
361 # blur-background-frame = true; # Blur background of opaque windows with transparent
363 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
364 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
365 # Exclude conditions for background blur.
368 fading = false; # Fade windows during opacity changes.
369 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
370 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
371 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
372 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
373 fade-exclude = [ ]; # Exclude conditions for fading.
376 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
377 # much faster but depends on a sane driver.
378 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
379 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
380 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
381 # instead of using FocusIn/Out events. Usually more reliable but
382 # depends on a EWMH-compliant WM.
383 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
384 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
385 # managers not passing _NET_WM_OPACITY of client windows to frame
387 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
388 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
389 # See man page for more details.
390 dbe = false; # Enable DBE painting mode. Rarely needed.
391 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
392 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
393 # Incompatible with certain VSync methods.
394 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
395 # detected, to maximize performance for full-screen windows.
396 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
398 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
399 # the same group focused at the same time.
400 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
401 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
403 # GLX backend # GLX backend fine-tune options. See man page for more info.
404 glx-no-stencil = true; # Recommended.
405 glx-copy-from-front = false; # Useful with --glx-swap-method,
406 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
407 # glx-no-rebind-pixmap = true; # Recommended if it works.
408 glx-no-rebind-pixmap = true; # Recommended if it works.
409 #glx-swap-method = "4"; # See man page.
410 glx-swap-method = "4"; # See man page.
412 # Window type settings
415 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
416 menu = { shadow = false; };
417 dropdown_menu = { shadow = false; };
418 popup_menu = { shadow = false; };
419 utility = { shadow = false; };
420 # fade: Fade the particular type of windows.
421 # shadow: Give those windows shadow
422 # opacity: Default opacity for the type of windows.
423 # focus: Whether to always consider windows of this type focused.
429 :header-args+: :tangle ~/.config/dunst/dunstrc
434 #font = Ubuntu Mono 10.5
435 font = Inconsolata 11
437 # Path to default icons.
438 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
443 # <s>strikethrough<s/>
446 # The format of the message. Possible variables are:
450 # %i iconname (including its path)
451 # %I iconname (without its path)
452 # %p progress value if set ([ 0%] to [100%]) or nothing
454 format = "<b>%s</b>\n%b"
455 # Sort messages by urgency
457 # Show how many messages are currently hidden (because of geometry)
459 # Alignment of message text.
460 # Possible values are "left", "center" and "right"
462 # The frequency with wich text that is longer than the notification
463 # window allows bounces back and forth.
464 # This option conflicts with 'word_wrap'.
465 # Set to 0 to disable
467 # show age of message if message is older than show_age_threshold seconds.
468 # set to -1 to disable
469 show_age_threshold = -1
470 # split notifications into multiple lines if they don't fit into geometry
472 # ignore newlines '\n' in notifications
474 # The geometry of the message window.
475 # geometry [{width}]x{height}][+/-{x}+/-{y}]
476 # The height is measured in number of notifications everything else in pixels. If the width
477 # is omitted but the height is given ("-geometry x2"), the message window
478 # expands over the whole screen (dmenu-like). If width is 0,
479 # the window expands to the longest message displayed.
480 # A positive x is measured from the left, a negative from the
481 # right side of the screen. Y is measured from the top and down respectevly.
482 # The width can be negative. In this case the actual width is the
483 # screen width minus the width defined in within the geometry option.
484 #geometry = "410x12-12+12"
485 #geometry = "0x0-30-30"
486 geometry = "260x12-30-30"
487 # The transparency of the window. range: [0; 100]
488 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
490 # Don't remove messages, if the user is idle (no mouse or keyboard input)
491 # for longer than idle_threshold seconds.
492 # Set to 0 to disable.
494 # Which monitor should the notifications be displayed on.
496 # Display notification on focused monitor. Possible modes are:
497 # mouse: follow mouse pointer
498 # keyboard: follow window with keyboard focus
499 # none: don't follow anything
501 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
502 # This should be the case for almost all modern windowmanagers.
504 # If this option is set to mouse or keyboard, the monitor option will be
507 # should a notification popped up from history be sticky or
508 # timeout as if it would normally do.
510 # The height of a single line. If the height is smaller than the font height,
511 # it will get raised to the font height.
512 # This adds empty space above and under the text.
515 show_indicators = yes
517 # Draw a line of 'separatpr_height' pixel height between two notifications.
518 # Set to 0 to disable
520 # padding between text and separator
523 horizontal_padding = 8
524 # Define a color for the separator.
525 # possible values are:
526 # * auto: dunst tries to find a color fitting to the background
527 # * foreground: use the same color as the foreground
528 # * frame: use the same color as the frame.
529 # * anything else will be interpreted as a X color
530 separator_color = foreground
531 # print a notification on startup
532 # This is mainly for error detection, since dbus (re-)starts dunst
533 # automatically after a crash.
534 startup_notification = false
536 #dmenu = /usr/bin/dmenu -p dunst:
537 dmenu = /usr/bin/rofi -dmenu -p dunst:
538 # browser for opening urls in context menu
539 browser = /usr/bin/firefox -new-tab
544 # shortcuts are specified as [modifier+][modifier+]...key
545 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
546 # and 'mod4' (windows-key)
547 # xev might be helpful to find names for keys
550 # close all notifications
551 close_all = ctrl+shift+space
552 # redisplay last message(s)
553 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
554 history = ctrl+shift+h
556 context = ctrl+shift+period
558 # IMPORTANT: colors have to be defined in quotation marks.
559 # Otherwise the '#' and following would be interpreted as a comment.
560 background = "#1d2a30"
561 foreground = "#71c2af"
564 background = "#1d2a30"
565 foreground = "#71c2af"
568 background = "#1d2a30"
569 foreground = "#ff9982"
572 # Every section that isn't one of the above is interpreted as a rules
573 # to override settings for certain messages.
574 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
575 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
577 # Shell-like globbing will get expanded.
580 # you can specify a script that gets run when the rule matches by setting
581 # the 'script' option.
582 # The script will be called as follows:
583 # script appname summary body icon urgency
584 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
586 # NOTE: if you don't want a notification to be displayed, set the format to ""
587 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
588 # fitting options for rules.
591 # script = dunst_espeak.sh
593 # summary = "*script*"
594 # script = dunst_test.sh
596 ## This notification will not be displayed
601 # summary = "*signed on*"
606 # summary = *signed off*
616 # summary = *twitter.com*
620 summary = *Brightness*
626 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
630 <?xml version="1.0"?>
631 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
633 <match target="font">
634 <edit mode="assign" name="rgba">
638 <match target="font">
639 <edit mode="assign" name="hinting">
643 <match target="font">
644 <edit mode="assign" name="hintstyle">
645 <const>hintslight</const>
648 <match target="font">
649 <edit mode="assign" name="antialias">
653 <match target="font">
654 <edit mode="assign" name="lcdfilter">
655 <const>lcddefault</const>
660 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
661 <alias binding="same">
662 <family>Helvetica</family>
664 <family>Liberation Sans</family>
674 :header-args+: :tangle ~/.gitconfig
681 email = amin@aminb.org
682 # signingkey = 4E05246AB0BF7FFB
696 autocrlf = input # CRLF -> LF on commit
697 editor = emacsclient -t
698 excludesfile = ~/.gitignore_global
711 git = !exec git # handle nested git calls, e.g. git git status
712 aliases = config --get-regexp '^alias\\.'
736 remote = magenta bold
745 # showUntrackedFiles = all
758 :header-args+: :tangle ~/.gitignore_global
773 :header-args+: :tangle ~/.latexmkrc
777 $pdf_previewer = "start zathura %O %S";
778 $clean_ext = "aux out";
780 # $pdf_update_method = 4;
781 # $pdf_update_command = "zathura %O %S";
783 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
784 # by Ctrl+click in the PDF.
785 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
787 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
792 Improve XPS 15 9560's touchpad experience.
794 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
796 Identifier "libinput touchpad catchall"
799 Option "ClickMethod" "clickfinger"
800 Option "NaturalScrolling" "true"
801 Option "Tapping" "on"
802 Option "TappingButtonMap" "lrm"
810 :header-args+: :tangle ~/.getmail/getmailrc
815 type = SimplePOP3SSLRetriever
816 server = fencepost.gnu.org
818 password_command = ("gpg2", "--no-tty", "-q", "-d", "~/.passwd/gnu.gpg")
824 path = ~/mail/gnu/Inbox/
832 :header-args+: :tangle ~/.config/systemd/user/getmail.service
835 #+begin_src conf :tangle no
837 Description=getmail service
841 ExecStart=/usr/bin/getmail
842 StandardOutput=syslog
848 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
851 #+begin_src conf :tangle no
853 Description=getmail timer
861 WantedBy=timers.target
866 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
870 default-cache-ttl 43200
873 default-cache-ttl-ssh 10800
874 max-cache-ttl-ssh 10800
876 # pinentry-program /usr/bin/pinentry-qt
883 :header-args+: :tangle ~/.gtkrc-2.0
887 gtk-theme-name="Greybird"
888 gtk-icon-theme-name="Paper"
889 gtk-font-name="Ubuntu 10"
891 # gtk-key-theme-name = "Emacs"
896 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
899 #+begin_src conf :tangle no
901 gtk-icon-theme-name = Paper
902 # gtk-theme-name = Adwaita
904 gtk-theme-name = Greybird
905 # gtk-theme-name = Arc-Darker
906 # gtk-theme-name = Numix-ArchBlue
908 gtk-font-name = Ubuntu 10
909 # gtk-key-theme-name = Emacs
916 :header-args+: :tangle ~/.mbsyncrc
927 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
930 IMAPStore amin-remote
933 MaildirStore amin-local
935 Inbox ~/mail/amin/Inbox
946 IMAPAccount uwaterloo
947 Host connect.uwaterloo.ca
949 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
952 IMAPStore uwaterloo-remote
955 MaildirStore uwaterloo-local
956 Path ~/mail/uwaterloo/
957 Inbox ~/mail/uwaterloo/Inbox
961 Master :uwaterloo-remote:
962 Slave :uwaterloo-local:
970 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
973 #+begin_src conf :tangle no
975 Description=mbsync service
979 ExecStart=/usr/bin/mbsync -Va
980 StandardOutput=syslog
986 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
989 #+begin_src conf :tangle no
991 Description=mbsync timer
999 WantedBy=timers.target
1004 :header-args+: :tangle ~/.config/mpd/mpd.conf
1008 # An example configuration file for MPD.
1009 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1012 # Files and directories #######################################################
1014 # This setting controls the top directory which MPD will search to discover the
1015 # available audio files and add them to the daemon's online database. This
1016 # setting defaults to the XDG directory, otherwise the music directory will be
1017 # be disabled and audio files will only be accepted over ipc socket (using
1018 # file:// protocol) or streaming files over an accepted protocol.
1020 music_directory "~/usr/music"
1022 # This setting sets the MPD internal playlist directory. The purpose of this
1023 # directory is storage for playlists created by MPD. The server will use
1024 # playlist files not created by the server but only if they are in the MPD
1025 # format. This setting defaults to playlist saving being disabled.
1027 playlist_directory "~/.mpd/playlists"
1029 # This setting sets the location of the MPD database. This file is used to
1030 # load the database at server start up and store the database while the
1031 # server is not up. This setting defaults to disabled which will allow
1032 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1033 # files over an accepted protocol.
1035 db_file "~/.mpd/database"
1037 # These settings are the locations for the daemon log files for the daemon.
1038 # These logs are great for troubleshooting, depending on your log_level
1041 # The special value "syslog" makes MPD use the local syslog daemon. This
1042 # setting defaults to logging to syslog, otherwise logging is disabled.
1044 log_file "~/.mpd/log"
1046 # This setting sets the location of the file which stores the process ID
1047 # for use of mpd --kill and some init scripts. This setting is disabled by
1048 # default and the pid file will not be stored.
1050 pid_file "~/.mpd/pid"
1052 # This setting sets the location of the file which contains information about
1053 # most variables to get MPD back into the same general shape it was in before
1054 # it was brought down. This setting is disabled by default and the server
1055 # state will be reset on server start up.
1057 state_file "~/.mpd/state"
1059 # The location of the sticker database. This is a database which
1060 # manages dynamic information attached to songs.
1062 sticker_file "~/.mpd/sticker.sql"
1064 ###############################################################################
1067 # General music daemon options ################################################
1069 # This setting specifies the user that MPD will run as. MPD should never run as
1070 # root and you may use this setting to make MPD change its user ID after
1071 # initialization. This setting is disabled by default and MPD is run as the
1076 # This setting specifies the group that MPD will run as. If not specified
1077 # primary group of user specified with "user" setting will be used (if set).
1078 # This is useful if MPD needs to be a member of group such as "audio" to
1079 # have permission to use sound card.
1083 # This setting sets the address for the daemon to listen on. Careful attention
1084 # should be paid if this is assigned to anything other then the default, any.
1085 # This setting can deny access to control of the daemon. Not effective if
1086 # systemd socket activiation is in use.
1089 #bind_to_address "any"
1091 # And for Unix Socket
1092 #bind_to_address "~/.mpd/socket"
1094 # This setting is the TCP port that is desired for the daemon to get assigned
1099 # This setting controls the type of information which is logged. Available
1100 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1101 # argument is recommended for troubleshooting, though can quickly stretch
1102 # available resources on limited hardware storage.
1104 #log_level "default"
1106 # If you have a problem with your MP3s ending abruptly it is recommended that
1107 # you set this argument to "no" to attempt to fix the problem. If this solves
1108 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1109 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1110 # point gapless MP3 playback can be enabled.
1112 #gapless_mp3_playback "yes"
1114 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1115 # of starting playback after startup.
1117 #restore_paused "no"
1119 # This setting enables MPD to create playlists in a format usable by other
1122 #save_absolute_paths_in_playlists "no"
1124 # This setting defines a list of tag types that will be extracted during the
1125 # audio file discovery process. The complete list of possible values can be
1126 # found in the user manual.
1127 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1129 # This setting enables automatic update of MPD's database when files in
1130 # music_directory are changed.
1134 # Limit the depth of the directories being watched, 0 means only watch
1135 # the music directory itself. There is no limit by default.
1137 #auto_update_depth "3"
1139 ###############################################################################
1142 # Symbolic link behavior ######################################################
1144 # If this setting is set to "yes", MPD will discover audio files by following
1145 # symbolic links outside of the configured music_directory.
1147 #follow_outside_symlinks "yes"
1149 # If this setting is set to "yes", MPD will discover audio files by following
1150 # symbolic links inside of the configured music_directory.
1152 #follow_inside_symlinks "yes"
1154 ###############################################################################
1157 # Zeroconf / Avahi Service Discovery ##########################################
1159 # If this setting is set to "yes", service information will be published with
1162 #zeroconf_enabled "yes"
1164 # The argument to this setting will be the Zeroconf / Avahi unique name for
1165 # this MPD server on the network.
1167 #zeroconf_name "Music Player"
1169 ###############################################################################
1172 # Permissions #################################################################
1174 # If this setting is set, MPD will require password authorization. The password
1175 # setting can be specified multiple times for different password profiles.
1177 #password "password@read,add,control,admin"
1179 # This setting specifies the permissions a user has who has not yet logged in.
1181 #default_permissions "read,add,control,admin"
1183 ###############################################################################
1186 # Database #######################################################################
1191 # host "other.mpd.host"
1195 # Input #######################################################################
1200 # proxy "proxy.isp.com:8080"
1202 # proxy_password "password"
1206 ###############################################################################
1208 # Audio Output ################################################################
1219 path "/tmp/mpd.fifo"
1223 # MPD supports various audio output types, as well as playing through multiple
1224 # audio outputs at the same time, through multiple audio_output settings
1225 # blocks. Setting this block is optional, though the server will only attempt
1226 # autodetection for one sound card.
1228 # An example of an ALSA output:
1232 # name "My ALSA Device"
1233 ## device "hw:0,0" # optional
1234 ## mixer_type "hardware" # optional
1235 ## mixer_device "default" # optional
1236 ## mixer_control "PCM" # optional
1237 ## mixer_index "0" # optional
1240 # An example of an OSS output:
1244 # name "My OSS Device"
1245 ## device "/dev/dsp" # optional
1246 ## mixer_type "hardware" # optional
1247 ## mixer_device "/dev/mixer" # optional
1248 ## mixer_control "PCM" # optional
1251 # An example of a shout output (for streaming to Icecast):
1255 # encoder "vorbis" # optional
1256 # name "My Shout Stream"
1263 # format "44100:16:1"
1264 ## protocol "icecast2" # optional
1265 ## user "source" # optional
1266 ## description "My Stream Description" # optional
1267 ## url "http://example.com" # optional
1268 ## genre "jazz" # optional
1269 ## public "no" # optional
1270 ## timeout "2" # optional
1271 ## mixer_type "software" # optional
1274 # An example of a recorder output:
1278 # name "My recorder"
1279 # encoder "vorbis" # optional, vorbis or lame
1280 # path "/var/lib/mpd/recorder/mpd.ogg"
1281 ## quality "5.0" # do not define if bitrate is defined
1282 # bitrate "128" # do not define if quality is defined
1283 # format "44100:16:1"
1286 # An example of a httpd output (built-in HTTP streaming server):
1290 # name "My HTTP Stream"
1291 # encoder "vorbis" # optional, vorbis or lame
1293 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1294 ## quality "5.0" # do not define if bitrate is defined
1295 # bitrate "128" # do not define if quality is defined
1296 # format "44100:16:1"
1297 # max_clients "0" # optional 0=no limit
1300 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1304 # name "My Pulse Output"
1305 ## server "remote_server" # optional
1306 ## sink "remote_server_sink" # optional
1309 # An example of a winmm output (Windows multimedia API).
1313 # name "My WinMM output"
1314 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1316 ## device "0" # optional
1317 ## mixer_type "hardware" # optional
1320 # An example of an openal output.
1324 # name "My OpenAL output"
1325 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1328 # An example of an sndio output.
1332 # name "sndio output"
1333 # mixer_type "software"
1336 # An example of an OS X output:
1340 # name "My OS X Device"
1341 ## device "Built-in Output" # optional
1342 ## channel_map "-1,-1,0,1" # optional
1345 ## Example "pipe" output:
1350 # command "aplay -f cd 2>/dev/null"
1351 ## Or if you're want to use AudioCompress
1352 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1353 ## Or to send raw PCM stream through PCM:
1354 # command "nc example.org 8765"
1355 # format "44100:16:2"
1358 ## An example of a null output (for no audio output):
1362 # name "My Null Output"
1363 # mixer_type "none" # optional
1366 ###############################################################################
1369 # Normalization automatic volume adjustments ##################################
1371 # This setting specifies the type of ReplayGain to use. This setting can have
1372 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1373 # chooses between "track" and "album" depending on the current state of
1374 # random playback. If random playback is enabled then "track" mode is used.
1375 # See <http://www.replaygain.org> for more details about ReplayGain.
1376 # This setting is off by default.
1380 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1381 # default this setting is disabled.
1383 #replaygain_preamp "0"
1385 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1386 # By default this setting is disabled.
1388 #replaygain_missing_preamp "0"
1390 # This setting enables or disables ReplayGain limiting.
1391 # MPD calculates actual amplification based on the ReplayGain tags
1392 # and replaygain_preamp / replaygain_missing_preamp setting.
1393 # If replaygain_limit is enabled MPD will never amplify audio signal
1394 # above its original level. If replaygain_limit is disabled such amplification
1395 # might occur. By default this setting is enabled.
1397 #replaygain_limit "yes"
1399 # This setting enables on-the-fly normalization volume adjustment. This will
1400 # result in the volume of all playing audio to be adjusted so the output has
1401 # equal "loudness". This setting is disabled by default.
1403 #volume_normalization "no"
1405 ###############################################################################
1407 # Character Encoding ##########################################################
1409 # If file or directory names do not display correctly for your locale then you
1410 # may need to modify this setting.
1412 #filesystem_charset "UTF-8"
1414 ###############################################################################
1419 :header-args+: :tangle ~/.msmtprc
1423 # Set default values for all following accounts.
1428 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1429 logfile ~/.msmtp.log
1434 tls_fingerprint BB:98:B3:02:83:B0:E0:C3:49:3E:C2:B2:A8:60:62:78:03:B3:5D:B3:BD:B8:0A:39:BB:E4:B0:66:D1:CF:D1:6B
1438 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1442 host fencepost.gnu.org
1443 tls_fingerprint 94:0E:37:EB:EA:44:5A:4B:B6:6F:16:3D:6C:7E:7E:44:2D:93:61:C1:FE:82:A8:29:5E:3C:12:4E:2D:BE:0E:2C
1447 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1451 host connect.uwaterloo.ca
1453 from abandali@uwaterloo.ca
1455 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1456 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1458 # uwaterloo (friendly address)
1459 account uwaterloo-friendly : uwaterloo
1460 from amin.bandali@uwaterloo.ca
1462 # Set a default account
1463 account default : aminb
1470 :header-args+: :tangle ~/.ncmpcpp/config
1473 #+begin_src conf :tangle no
1474 ##############################################################
1475 ## This is the example configuration file. Copy it to ##
1476 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1477 ## and set up your preferences. ##
1478 ##############################################################
1480 ##### directories ######
1482 ## Directory for storing ncmpcpp related files.
1483 ## Changing it is useful if you want to store
1484 ## everything somewhere else and provide command
1485 ## line setting for alternative location to config
1486 ## file which defines that while launching ncmpcpp.
1489 ncmpcpp_directory = ~/.ncmpcpp
1492 ## Directory for storing downloaded lyrics. It
1493 ## defaults to ~/.lyrics since other MPD clients
1494 ## (eg. ncmpc) also use that location.
1497 #lyrics_directory = ~/.lyrics
1499 ##### connection settings #####
1501 #mpd_host = localhost
1505 #mpd_connection_timeout = 5
1507 ## Needed for tag editor and file operations to work.
1509 mpd_music_dir = ~/usr/music
1511 #mpd_crossfade_time = 5
1513 ##### music visualizer #####
1515 ## Note: In order to make music visualizer work you'll
1516 ## need to use mpd fifo output, whose format parameter
1517 ## has to be set to 44100:16:1 for mono visualization
1518 ## or 44100:16:2 for stereo visualization. Example
1519 ## configuration (it has to be put into mpd.conf):
1523 ## name "Visualizer feed"
1524 ## path "/tmp/mpd.fifo"
1525 ## format "44100:16:2"
1529 visualizer_fifo_path = /tmp/mpd.fifo
1532 ## Note: Below parameter is needed for ncmpcpp
1533 ## to determine which output provides data for
1534 ## visualizer and thus allow syncing between
1535 ## visualization and sound as currently there
1536 ## are some problems with it.
1539 visualizer_output_name = my fifo
1542 ## If you set format to 44100:16:2, make it 'yes'.
1544 visualizer_in_stereo = yes
1547 ## Multiply received samples by given value. Very
1548 ## useful for proper visualization of quiet music.
1550 #visualizer_sample_multiplier = 1
1553 ## Note: Below parameter defines how often ncmpcpp
1554 ## has to "synchronize" visualizer and audio outputs.
1555 ## 30 seconds is optimal value, but if you experience
1556 ## synchronization problems, set it to lower value.
1557 ## Keep in mind that sane values start with >=10.
1560 visualizer_sync_interval = 30
1563 ## Note: To enable spectrum frequency visualization
1564 ## you need to compile ncmpcpp with fftw3 support.
1567 ## Available values: spectrum, wave, wave_filled, ellipse.
1569 visualizer_type = spectrum
1571 #visualizer_look = ●▮
1572 visualizer_look = "●•"
1574 #visualizer_color = blue, cyan, green, yellow, magenta, red
1576 ## Alternative subset of 256 colors for terminals that support it.
1578 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1580 ##### system encoding #####
1582 ## ncmpcpp should detect your charset encoding
1583 ## but if it failed to do so, you can specify
1584 ## charset encoding you are using here.
1586 ## Note: You can see whether your ncmpcpp build
1587 ## supports charset detection by checking output
1588 ## of `ncmpcpp --version`.
1590 ## Note: Since MPD uses UTF-8 by default, setting
1591 ## this option makes sense only if your encoding
1595 #system_encoding = ""
1599 ## Time of inactivity (in seconds) after playlist
1600 ## highlighting will be disabled (0 = always on).
1602 #playlist_disable_highlight_delay = 5
1604 ## Defines how long messages are supposed to be visible.
1606 #message_delay_time = 5
1608 ##### song format #####
1610 ## For a song format you can use:
1616 ## %A - album artist
1620 ## %n - track number (01/12 -> 01)
1621 ## %N - full track info (01/12 -> 01/12)
1628 ## $R - begin right alignment
1630 ## If you want to make sure that a part of the format is displayed
1631 ## only when certain tags are present, you can archieve it by
1632 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1633 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1634 ## It is also possible to define a list of alternatives by providing
1635 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1636 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1639 ## Note: If you want to set limit on maximal length of a tag, just
1640 ## put the appropriate number between % and character that defines
1641 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1643 ## In addition, formats support markers used for text attributes.
1644 ## They are followed by character '$'. After that you can put:
1646 ## - 0 - default window color (discards all other colors)
1655 ## - 9 - end of current color
1657 ## - u - underline text
1658 ## - r - reverse colors
1659 ## - a - use alternative character set
1661 ## If you don't want to use a non-color attribute anymore, just put it
1662 ## again, but this time insert character '/' between '$' and attribute
1663 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1664 ## or filename with reversed colors.
1666 ## If you want to use 256 colors and/or background colors in formats
1667 ## (the naming scheme is described below in section about color
1668 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1669 ## the artist tag to one of the non-standard colors and make it have
1670 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1671 ## that for standard colors this is interchangable with attributes
1674 ## Note: colors can be nested.
1677 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1679 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1681 #song_library_format = {%n - }{%t}|{%f}
1684 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1686 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1688 #now_playing_prefix = $b
1690 #now_playing_suffix = $/b
1692 #browser_playlist_prefix = "$2playlist$9 "
1694 #selected_item_prefix = $6
1696 #selected_item_suffix = $9
1698 #modified_item_prefix = $3> $9
1701 ## Note: attributes are not supported for the following variables.
1703 #song_window_title_format = {%a - }{%t}|{%f}
1705 ## Note: Below variables are used for sorting songs in browser.
1706 ## The sort mode determines how songs are sorted, and can be used
1707 ## in combination with a sort format to specify a custom sorting format.
1708 ## Available values for browser_sort_mode are "name", "mtime", "format"
1712 #browser_sort_mode = name
1714 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1716 ##### columns settings #####
1718 ## syntax of song columns list format is "column column etc."
1720 ## - syntax for each column is:
1722 ## (width of the column)[color of the column]{displayed tag}
1724 ## Note: Width is by default in %, if you want a column to
1725 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1726 ## will be the column that take 10% of screen (so the real width
1727 ## will depend on actual screen size), whereas (10f)[white]{a}
1728 ## will take 10 terminal cells, no matter how wide the screen is.
1730 ## - color is optional (if you want the default one,
1731 ## leave the field empty).
1733 ## Note: You can give a column additional attributes by putting appropriate
1734 ## character after displayed tag character. Available attributes are:
1736 ## - r - column will be right aligned
1737 ## - E - if tag is empty, empty tag marker won't be displayed
1741 ## - give a column custom name by putting it after attributes,
1742 ## separated with character ':', e.g. {lr:Length} gives you
1743 ## right aligned column of lengths named "Length".
1745 ## - define sequence of tags, that have to be displayed in case
1746 ## predecessor is empty in a way similar to the one in classic
1747 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1748 ## creates column named "Owner" that tries to display artist
1749 ## tag and then composer and performer if previous ones are
1753 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1755 ##### various settings #####
1758 ## Note: Custom command that will be executed each
1759 ## time song changes. Useful for notifications etc.
1761 #execute_on_song_change = ""
1763 #playlist_show_mpd_host = no
1765 #playlist_show_remaining_time = no
1767 #playlist_shorten_total_times = no
1769 #playlist_separate_albums = no
1772 ## Note: Possible display modes: classic, columns.
1774 #playlist_display_mode = columns
1776 #browser_display_mode = classic
1778 #search_engine_display_mode = classic
1780 #playlist_editor_display_mode = classic
1782 #discard_colors_if_item_is_selected = yes
1784 #incremental_seeking = yes
1788 #volume_change_step = 2
1790 #autocenter_mode = no
1792 #centered_cursor = no
1795 ## Note: You can specify third character which will
1796 ## be used to build 'empty' part of progressbar.
1798 #progressbar_look = =>
1799 progressbar_look = "─╼╶"
1800 #progressbar_look = "─⊙╶"
1802 #progressbar_boldness = yes
1804 ## Available values: database, playlist.
1806 #default_place_to_search_in = database
1808 ## Available values: classic, alternative.
1810 #user_interface = classic
1812 #data_fetching_delay = yes
1814 ## Available values: artist, album_artist, date, genre, composer, performer.
1816 #media_library_primary_tag = artist
1818 ## Available values: wrapped, normal.
1820 #default_find_mode = wrapped
1822 #default_tag_editor_pattern = %n - %t
1824 #header_visibility = yes
1826 #statusbar_visibility = yes
1828 #titles_visibility = yes
1830 #header_text_scrolling = yes
1832 #cyclic_scrolling = no
1836 #follow_now_playing_lyrics = no
1838 #fetch_lyrics_for_current_song_in_background = no
1840 #store_lyrics_in_song_dir = no
1842 #generate_win32_compatible_filenames = yes
1844 #allow_for_physical_item_deletion = no
1847 ## Note: If you set this variable, ncmpcpp will try to
1848 ## get info from last.fm in language you set and if it
1849 ## fails, it will fall back to english. Otherwise it will
1850 ## use english the first time.
1852 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1854 #lastfm_preferred_language = en
1856 #show_hidden_files_in_local_browser = no
1859 ## How shall screen switcher work?
1861 ## - "previous" - switch between the current and previous screen.
1862 ## - "screen1,...,screenN" - switch between given sequence of screens.
1864 ## Screens available for use: help, playlist, browser, search_engine,
1865 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1867 #screen_switcher_mode = playlist, browser
1870 ## Note: You can define startup screen
1871 ## by choosing screen from the list above.
1873 #startup_screen = playlist
1876 ## Note: You can define startup slave screen
1877 ## by choosing screen from the list above or
1878 ## an empty value for no slave screen.
1880 #startup_slave_screen = ""
1882 #startup_slave_screen_focus = no
1885 ## Default width of locked screen (in %).
1886 ## Acceptable values are from 20 to 80.
1889 #locked_screen_width_part = 50
1891 #ask_for_locked_screen_width_part = yes
1893 #jump_to_now_playing_song_at_start = yes
1895 #ask_before_clearing_playlists = yes
1897 #clock_display_seconds = no
1899 #display_volume_level = yes
1901 #display_bitrate = no
1903 #display_remaining_time = no
1905 ## Available values: none, basic, extended, perl.
1907 #regular_expressions = perl
1910 ## Note: If below is enabled, ncmpcpp will ignore leading
1911 ## "The" word while sorting items in browser, tags in
1912 ## media library, etc.
1914 #ignore_leading_the = no
1916 #block_search_constraints_change_if_items_found = yes
1918 #mouse_support = yes
1920 #mouse_list_scroll_whole_page = yes
1922 #empty_tag_marker = <empty>
1924 #tags_separator = " | "
1926 #tag_editor_extended_numeration = no
1928 #media_library_sort_by_mtime = no
1930 #enable_window_title = yes
1933 ## Note: You can choose default search mode for search
1934 ## engine. Available modes are:
1936 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1937 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1938 ## but if your mpd is on a remote machine, downloading big database
1939 ## to process it can take a while
1940 ## - 3 - match only exact values (this mode uses mpd function for searching
1941 ## in database and local one for searching in current playlist)
1944 #search_engine_default_search_mode = 1
1946 #external_editor = nano
1948 ## Note: set to yes if external editor is a console application.
1950 #use_console_editor = yes
1952 ##### colors definitions #####
1954 ## It is possible to set a background color by setting a color
1955 ## value "<foreground>_<background>", e.g. red_black will set
1956 ## foregound color to red and background color to black.
1958 ## In addition, for terminals that support 256 colors it
1959 ## is possible to set one of them by using a number in range
1960 ## [1, 256] instead of color name, e.g. numerical value
1961 ## corresponding to red_black is 2_1. To find out if the
1962 ## terminal supports 256 colors, run ncmpcpp and check out
1963 ## the bottom of the help screen for list of available colors
1964 ## and their numerical values.
1966 ## Note: due to technical limitations of ncurses, if 256 colors
1967 ## are used, it is possible to either use only the colors with
1968 ## default background color, or all pairs from 1_1 up to 254_127,
1969 ## depending on the ncurses version used.
1972 #colors_enabled = yes
1974 #empty_tag_color = cyan
1976 #header_window_color = default
1978 #volume_color = default
1980 #state_line_color = default
1982 #state_flags_color = default
1984 #main_window_color = yellow
1990 #main_window_highlight_color = yellow
1992 #progressbar_color = black
1994 #progressbar_elapsed_color = green
1996 #statusbar_color = default
1998 #alternative_ui_separator_color = black
2000 #active_column_color = red
2002 #window_border_color = green
2004 #active_window_border = red
2010 :header-args+: :tangle ~/.ncmpcpp/bindings
2013 #+begin_src conf :tangle no
2038 move_sort_order_down
2047 :header-args+: :tangle ~/.notmuch-config
2051 # .notmuch-config - Configuration file for the notmuch mail system
2053 # For more information about notmuch, see https://notmuchmail.org
2055 # Database configuration
2057 # The only value supported here is 'path' which should be the top-level
2058 # directory where your mail currently exists and to where mail will be
2059 # delivered in the future. Files should be individual email messages.
2060 # Notmuch will store its database within a sub-directory of the path
2061 # configured here named ".notmuch".
2064 path=/home/amin/mail
2066 # User configuration
2068 # Here is where you can let notmuch know how you would like to be
2069 # addressed. Valid settings are
2071 # name Your full name.
2072 # primary_email Your primary email address.
2073 # other_email A list (separated by ';') of other email addresses
2074 # at which you receive email.
2076 # Notmuch will use the various email addresses configured here when
2077 # formatting replies. It will avoid including your own addresses in the
2078 # recipient list of replies, and will set the From address based on the
2079 # address to which the original email was addressed.
2083 primary_email=amin@aminb.org
2084 other_email=amin.bandali@uwaterloo.ca;mbandali@uwaterloo.ca;aminb@gnu.org;
2086 # Configuration for "notmuch new"
2088 # The following options are supported here:
2090 # tags A list (separated by ';') of the tags that will be
2091 # added to all messages incorporated by "notmuch new".
2093 # ignore A list (separated by ';') of file and directory names
2094 # that will not be searched for messages by "notmuch new".
2096 # NOTE: *Every* file/directory that goes by one of those
2097 # names will be ignored, independent of its depth/location
2098 # in the mail store.
2103 ignore=.uidvalidity;.mbsyncstate
2105 # Search configuration
2107 # The following option is supported here:
2110 # A ;-separated list of tags that will be excluded from
2111 # search results by default. Using an excluded tag in a
2112 # query will override that exclusion.
2115 exclude_tags=deleted;spam;
2117 # Maildir compatibility configuration
2119 # The following option is supported here:
2121 # synchronize_flags Valid values are true and false.
2123 # If true, then the following maildir flags (in message filenames)
2124 # will be synchronized with the corresponding notmuch tags:
2132 # S unread (added when 'S' flag is not present)
2134 # The "notmuch new" command will notice flag changes in filenames
2135 # and update tags, while the "notmuch tag" and "notmuch restore"
2136 # commands will notice tag changes and update flags in filenames
2139 synchronize_flags=true
2141 # Cryptography related configuration
2143 # The following option is supported here:
2146 # binary name or full path to invoke gpg.
2154 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2160 # apply tags to lists
2161 notmuch tag +lists +lists/deepspec -- folder:amin/lists/deepspec
2162 notmuch tag +lists +lists/haskell-cafe -- folder:amin/lists/haskell-cafe
2163 notmuch tag +lists +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2164 notmuch tag +lists +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2165 notmuch tag +lists +lists/notmuch -- folder:amin/lists/notmuch
2166 notmuch tag +lists +lists/info-gnu-emacs -- folder:amin/lists/info-gnu-emacs
2167 notmuch tag +lists +lists/help-gnu-emacs -- folder:amin/lists/help-gnu-emacs
2168 notmuch tag +lists +lists/emacs-devel -- folder:amin/lists/emacs-devel
2173 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2176 #+begin_src conf :tangle no
2178 Description=notmuch service
2182 ExecStart=/usr/bin/notmuch new
2183 StandardOutput=syslog
2184 StandardError=syslog
2189 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2192 #+begin_src conf :tangle no
2194 Description=notmuch timer
2199 Unit=notmuch.service
2202 WantedBy=timers.target
2209 :header-args+: :tangle ~/.offlineimaprc
2212 #+begin_src conf :tangle no
2214 pythonfile = ~/.offlineimap.py
2215 accounts = Gmail, aminb
2219 localrepository = GmailL
2220 remoterepository = GmailR
2223 localrepository = aminbL
2224 remoterepository = aminbR
2228 localfolders = ~/Maildir/Gmail
2232 remotehost = imap.gmail.com
2233 remoteusereval = mailuser("gmail")
2234 remotepasseval = mailpasswd("gmail")
2235 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2237 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2243 localfolders = ~/Maildir/aminb
2247 remotehost = mail.aminb.org
2248 remoteusereval = mailuser("aminb")
2249 remotepasseval = mailpasswd("aminb")
2250 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2252 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2259 :header-args+: :tangle ~/.offlineimap.py
2262 #+begin_src python :tangle no
2266 def mailpasswd(acct):
2267 acct = os.path.basename(acct)
2268 path = "/home/amin/.passwd/%s.gpg" % acct
2269 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2271 return subprocess.check_output(args).strip()
2272 except subprocess.CalledProcessError:
2276 acct = os.path.basename(acct)
2277 path = "/home/amin/.passwd/%s" % acct
2278 args = ["cat", path]
2280 return subprocess.check_output(args).strip()
2281 except subprocess.CalledProcessError:
2284 def prime_gpg_agent():
2288 ret = (mailpasswd("prime") == "prime")
2290 from offlineimap.ui import getglobalui
2291 sys.stderr.write("Error reading in passwords. Terminating.\n")
2292 getglobalui().terminate()
2303 :header-args+: :tangle ~/.config/polybar/config
2306 #+begin_src conf :tangle no
2307 ;=====================================================
2309 ; To learn more about how to configure Polybar
2310 ; go to https://github.com/jaagr/polybar
2312 ; The README contains alot of information
2314 ;=====================================================
2317 ;background = ${xrdb:color0:#222}
2319 background-alt = #444
2320 ;foreground = ${xrdb:color7:#222}
2322 foreground-alt = #888
2328 ;monitor = ${env:MONITOR:HDMI-1}
2336 background = ${colors.background}
2337 foreground = ${colors.foreground}
2343 border-color = #00000000
2348 module-margin-left = 2
2349 module-margin-right = 2
2351 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2352 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2353 font-2 = Wuncon Siji:pixelsize=10;1
2354 font-3 = FontAwesome:pixelsize=10;1
2356 modules-left = bspwm xwindow
2358 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2360 tray-position = right
2362 ;tray-transparent = true
2363 ;tray-background = #0063ff
2368 ;override-redirect = true
2370 scroll-up = bspwm-desknext
2371 scroll-down = bspwm-deskprev
2374 type = internal/xwindow
2375 label = %title:0:50:...%
2378 type = internal/xkeyboard
2379 blacklist-0 = num lock
2381 format-prefix = " "
2382 format-prefix-foreground = ${colors.foreground-alt}
2383 format-prefix-underline = ${colors.secondary}
2385 label-layout = %layout%
2386 label-layout-underline = ${colors.secondary}
2388 label-indicator-padding = 2
2389 label-indicator-margin = 1
2390 label-indicator-background = ${colors.secondary}
2391 label-indicator-underline = ${colors.secondary}
2399 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2400 label-unmounted = %mountpoint% not mounted
2401 label-unmounted-foreground = ${colors.foreground-alt}
2404 type = internal/bspwm
2406 label-focused = %index%
2407 label-focused-background = ${colors.background-alt}
2408 label-focused-underline= ${colors.primary}
2409 label-focused-padding = 2
2411 label-occupied = %index%
2412 label-occupied-padding = 2
2414 label-urgent = %index%!
2415 label-urgent-background = ${colors.alert}
2416 label-urgent-padding = 2
2418 label-empty = %index%
2419 label-empty-foreground = ${colors.foreground-alt}
2420 label-empty-padding = 2
2424 format = <label-state> <label-mode>
2426 wrapping-scroll = false
2428 ; Only show workspaces on the same output as the bar
2429 ;pin-workspaces = true
2431 label-mode-padding = 2
2432 label-mode-foreground = #000
2433 label-mode-background = ${colors.primary}
2435 ; focused = Active workspace on focused monitor
2436 label-focused = %index%
2437 label-focused-background = ${module/bspwm.label-focused-background}
2438 label-focused-underline = ${module/bspwm.label-focused-underline}
2439 label-focused-padding = ${module/bspwm.label-focused-padding}
2441 ; unfocused = Inactive workspace on any monitor
2442 label-unfocused = %index%
2443 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2445 ; visible = Active workspace on unfocused monitor
2446 label-visible = %index%
2447 label-visible-background = ${self.label-focused-background}
2448 label-visible-underline = ${self.label-focused-underline}
2449 label-visible-padding = ${self.label-focused-padding}
2451 ; urgent = Workspace with urgency hint set
2452 label-urgent = %index%
2453 label-urgent-background = ${module/bspwm.label-urgent-background}
2454 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2458 format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2466 label-song-maxlen = 25
2467 label-song-ellipsis = true
2470 type = internal/xbacklight
2472 format = <label> <bar>
2477 bar-indicator-foreground = #ff
2478 bar-indicator-font = 2
2481 bar-fill-foreground = #9f78e1
2484 bar-empty-foreground = ${colors.foreground-alt}
2486 [module/backlight-acpi]
2487 inherit = module/xbacklight
2488 type = internal/backlight
2489 ;card = intel_backlight
2490 card = mba6x_backlight
2495 format-prefix = " "
2496 format-prefix-foreground = ${colors.foreground-alt}
2497 format-underline = #f90000
2498 label = %percentage%%
2501 type = internal/memory
2503 format-prefix = " "
2504 format-prefix-foreground = ${colors.foreground-alt}
2505 format-underline = #4bffdc
2506 label = %percentage_used%%
2509 type = internal/network
2513 format-connected = <ramp-signal> <label-connected>
2514 format-connected-underline = #9f78e1
2515 label-connected = %essid%
2517 format-disconnected =
2518 ;format-disconnected = <label-disconnected>
2519 ;format-disconnected-underline = ${self.format-connected-underline}
2520 ;label-disconnected = %ifname% disconnected
2521 ;label-disconnected-foreground = ${colors.foreground-alt}
2528 ramp-signal-foreground = ${colors.foreground-alt}
2531 type = internal/network
2535 format-connected-underline = #55aa55
2536 format-connected-prefix = " "
2537 format-connected-prefix-foreground = ${colors.foreground-alt}
2538 label-connected = %local_ip%
2540 format-disconnected =
2541 ;format-disconnected = <label-disconnected>
2542 ;format-disconnected-underline = ${self.format-connected-underline}
2543 ;label-disconnected = %ifname% disconnected
2544 ;label-disconnected-foreground = ${colors.foreground-alt}
2547 type = internal/date
2551 date-alt = " %Y-%m-%d"
2557 format-prefix-foreground = ${colors.foreground-alt}
2558 format-underline = #0a6cf5
2560 label = %date% %time%
2563 type = internal/volume
2565 format-volume = <label-volume> <bar-volume>
2567 label-volume-foreground = ${root.foreground}
2569 format-muted-prefix = " "
2570 format-muted-foreground = ${colors.foreground-alt}
2573 bar-volume-width = 10
2574 bar-volume-foreground-0 = #55aa55
2575 bar-volume-foreground-1 = #55aa55
2576 bar-volume-foreground-2 = #55aa55
2577 bar-volume-foreground-3 = #55aa55
2578 bar-volume-foreground-4 = #55aa55
2579 bar-volume-foreground-5 = #f5a70a
2580 bar-volume-foreground-6 = #ff5555
2581 bar-volume-gradient = false
2582 bar-volume-indicator = |
2583 bar-volume-indicator-font = 2
2585 bar-volume-fill-font = 2
2586 bar-volume-empty = ─
2587 bar-volume-empty-font = 2
2588 bar-volume-empty-foreground = ${colors.foreground-alt}
2591 type = internal/battery
2596 format-charging = <animation-charging> <label-charging>
2597 format-charging-underline = #ffb52a
2599 format-discharging = <ramp-capacity> <label-discharging>
2600 format-discharging-underline = ${self.format-charging-underline}
2602 format-full-prefix = " "
2603 format-full-prefix-foreground = ${colors.foreground-alt}
2604 format-full-underline = ${self.format-charging-underline}
2609 ramp-capacity-foreground = ${colors.foreground-alt}
2611 animation-charging-0 =
2612 animation-charging-1 =
2613 animation-charging-2 =
2614 animation-charging-foreground = ${colors.foreground-alt}
2615 animation-charging-framerate = 750
2617 [module/temperature]
2618 type = internal/temperature
2620 warn-temperature = 66
2622 format = <ramp> <label>
2623 format-underline = #f50a4d
2624 format-warn = <ramp> <label-warn>
2625 format-warn-underline = ${self.format-underline}
2627 label = %temperature%
2628 label-warn = %temperature%
2629 label-warn-foreground = ${colors.secondary}
2634 ramp-foreground = ${colors.foreground-alt}
2642 label-open-foreground = ${colors.secondary}
2643 label-close = cancel
2644 label-close-foreground = ${colors.secondary}
2646 label-separator-foreground = ${colors.foreground-alt}
2649 menu-0-0-exec = menu-open-1
2650 menu-0-1 = power off
2651 menu-0-1-exec = menu-open-2
2654 menu-1-0-exec = menu-open-0
2656 menu-1-1-exec = sudo reboot
2658 menu-2-0 = power off
2659 menu-2-0-exec = sudo poweroff
2661 menu-2-1-exec = menu-open-0
2664 type = custom/script
2667 format-prefix = " "
2668 format-prefix-foreground = ${colors.foreground-alt}
2669 format-underline = #0a6cf5
2670 exec = notmuch count tag:unread
2673 screenchange-reload = true
2674 ;compositing-background = xor
2675 ;compositing-background = screen
2676 ;compositing-foreground = source
2677 ;compositing-border = over
2688 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2691 #+begin_src sh :tangle no
2692 # Terminate already running bar instances
2695 # Wait until the processes have been shut down
2696 while pgrep -x polybar >/dev/null; do sleep 1; done
2701 echo "Bars launched..."
2706 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2711 Description=Powertop tunings
2714 ExecStart=/usr/bin/powertop --auto-tune
2715 RemainAfterExit=true
2718 WantedBy=multi-user.target
2725 :header-args+: :tangle ~/.config/ranger/rc.conf
2728 #+begin_src conf :tangle no
2729 # ===================================================================
2730 # This file contains the default startup commands for ranger.
2731 # To change them, it is recommended to create the file
2732 # ~/.config/ranger/rc.conf and add your custom commands there.
2734 # If you copy this whole file there, you may want to set the environment
2735 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2737 # The purpose of this file is mainly to define keybindings and settings.
2738 # For running more complex python code, please create a plugin in "plugins/" or
2739 # a command in "commands.py".
2741 # Each line is a command that will be run before the user interface
2742 # is initialized. As a result, you can not use commands which rely
2743 # on the UI such as :delete or :mark.
2744 # ===================================================================
2746 # ===================================================================
2748 # ===================================================================
2750 # How many columns are there, and what are their relative widths?
2751 set column_ratios 1,3,4
2753 # Which files should be hidden? (regular expression)
2754 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2756 # Show hidden files? You can toggle this by typing 'zh'
2757 set show_hidden false
2759 # Ask for a confirmation when running the "delete" command?
2760 # Valid values are "always" (default), "never", "multiple"
2761 # With "multiple", ranger will ask only if you delete multiple files at once.
2762 set confirm_on_delete multiple
2764 # Which script is used to generate file previews?
2765 # ranger ships with scope.sh, a script that calls external programs (see
2766 # README for dependencies) to preview images, archives, etc.
2767 set preview_script ~/.config/ranger/scope.sh
2769 # Use the external preview script or display simple plain text previews?
2770 set use_preview_script true
2772 # Open all images in this directory when running certain image viewers
2773 # like feh or sxiv? You can still open selected files by marking them.
2774 set open_all_images true
2776 # Be aware of version control systems and display information.
2779 # State of the three backends git, hg, bzr. The possible states are
2780 # disabled, local (only show local info), enabled (show local and remote
2782 set vcs_backend_git enabled
2783 set vcs_backend_hg disabled
2784 set vcs_backend_bzr disabled
2786 # Preview images in full color with the external command "w3mimgpreview"?
2787 # This requires the console web browser "w3m" and a supported terminal.
2788 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2789 set preview_images true
2791 # Use a unicode "..." character to mark cut-off filenames?
2792 set unicode_ellipsis false
2794 # Show dotfiles in the bookmark preview box?
2795 set show_hidden_bookmarks true
2797 # Which colorscheme to use? These colorschemes are available by default:
2798 # default, jungle, snow
2799 set colorscheme default
2801 # Preview files on the rightmost column?
2802 # And collapse (shrink) the last column if there is nothing to preview?
2803 set preview_files true
2804 set preview_directories true
2805 set collapse_preview true
2807 # Save the console history on exit?
2808 set save_console_history true
2810 # Draw the status bar on top of the browser window (default: bottom)
2811 set status_bar_on_top false
2813 # Draw a progress bar in the status bar which displays the average state of all
2814 # currently running tasks which support progress bars?
2815 set draw_progress_bar_in_status_bar true
2817 # Draw borders around columns?
2818 set draw_borders true
2820 # Display the directory name in tabs?
2821 set dirname_in_tabs false
2823 # Enable the mouse support?
2824 set mouse_enabled true
2826 # Display the file size in the main column or status bar?
2827 set display_size_in_main_column true
2828 set display_size_in_status_bar true
2830 # Display files tags in all columns or only in main column?
2831 set display_tags_in_all_columns true
2833 # Set a title for the window?
2834 set update_title false
2836 # Set the title to "ranger" in the tmux program?
2837 set update_tmux_title false
2839 # Shorten the title if it gets long? The number defines how many
2840 # directories are displayed at once, 0 turns off this feature.
2843 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2844 set tilde_in_titlebar false
2846 # How many directory-changes or console-commands should be kept in history?
2847 set max_history_size 20
2848 set max_console_history_size 50
2850 # Try to keep so much space between the top/bottom border when scrolling:
2853 # Flush the input after each key hit? (Noticable when ranger lags)
2856 # Padding on the right when there's no preview?
2857 # This allows you to click into the space to run the file.
2858 set padding_right true
2860 # Save bookmarks (used with mX and `X) instantly?
2861 # This helps to synchronize bookmarks between multiple ranger
2862 # instances but leads to *slight* performance loss.
2863 # When false, bookmarks are saved when ranger is exited.
2864 set autosave_bookmarks true
2866 # You can display the "real" cumulative size of directories by using the
2867 # command :get_cumulative_size or typing "dc". The size is expensive to
2868 # calculate and will not be updated automatically. You can choose
2869 # to update it automatically though by turning on this option:
2870 set autoupdate_cumulative_size false
2872 # Turning this on makes sense for screen readers:
2873 set show_cursor false
2875 # One of: size, basename, mtime, type
2878 # Additional sorting options
2879 set sort_reverse false
2880 set sort_case_insensitive true
2881 set sort_directories_first true
2883 # Enable this if key combinations with the Alt Key don't work for you.
2884 # (Especially on xterm)
2885 set xterm_alt_key false
2887 # ===================================================================
2889 # ===================================================================
2890 # You can set local options that only affect a single directory.
2893 # setlocal path=~/downloads sort mtime
2895 # ===================================================================
2896 # == Command Aliases in the Console
2897 # ===================================================================
2905 alias filter scout -prt
2906 alias find scout -aet
2907 alias mark scout -mr
2908 alias unmark scout -Mr
2909 alias search scout -rs
2910 alias search_inc scout -rts
2911 alias travel scout -aefiklst
2913 # ===================================================================
2914 # == Define keys for the browser
2915 # ===================================================================
2924 map <C-l> redraw_window
2926 map <esc> change_mode normal
2937 map @ console -p6 shell %%s
2938 map # console shell -p
2940 map r chain draw_possible_programs; console open_with
2947 map "<any> tag_toggle tag=%any
2948 map <Space> mark_files toggle=True
2949 map v mark_files all=True toggle=True
2950 map uv mark_files all=True val=False
2951 map V toggle_visual_mode
2952 map uV toggle_visual_mode reverse=True
2954 # For the nostalgics: Midnight Commander bindings
2956 map <F3> display_file
2960 map <F7> console mkdir
2961 map <F8> console delete
2964 # In case you work on a keyboard with dvorak layout
2966 map <DOWN> move down=1
2967 map <LEFT> move left=1
2968 map <RIGHT> move right=1
2969 map <HOME> move to=0
2970 map <END> move to=-1
2971 map <PAGEDOWN> move down=1 pages=True
2972 map <PAGEUP> move up=1 pages=True
2973 map <CR> move right=1
2974 map <DELETE> console delete
2975 map <INSERT> console touch
2984 copymap <PAGEDOWN> <C-F>
2985 copymap <PAGEUP> <C-B>
2987 map J move down=0.5 pages=True
2988 map K move up=0.5 pages=True
2996 map [ move_parent -1
3011 map gR eval fm.cd(ranger.RANGERDIR)
3013 map g? cd /usr/share/doc/ranger
3017 map du shell -p du --max-depth=1 -h --apparent-size
3018 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3019 map yp shell -d echo -n %d/%f | xsel -i
3020 map yd shell -d echo -n %d | xsel -i
3021 map yn shell -d echo -n %f | xsel -i
3023 # Filesystem Operations
3026 map cw console rename
3027 map A eval fm.open_console('rename ' + fm.thisfile.basename)
3028 map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3031 map po paste overwrite=True
3032 map pl paste_symlink relative=False
3033 map pL paste_symlink relative=True
3034 map phl paste_hardlink
3035 map pht paste_hardlinked_subtree
3040 map dr cut mode=remove
3044 map ya copy mode=add
3045 map yr copy mode=remove
3047 # Temporary workarounds
3048 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3049 map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3050 map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3051 map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3052 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3053 map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3054 map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3055 map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3058 map / console search
3060 map N search_next forward=False
3061 map ct search_next order=tag
3062 map cs search_next order=size
3063 map ci search_next order=mimetype
3064 map cc search_next order=ctime
3065 map cm search_next order=mtime
3066 map ca search_next order=atime
3071 map <TAB> tab_move 1
3072 map <S-TAB> tab_move -1
3073 map <A-Right> tab_move 1
3074 map <A-Left> tab_move -1
3080 map <a-1> tab_open 1
3081 map <a-2> tab_open 2
3082 map <a-3> tab_open 3
3083 map <a-4> tab_open 4
3084 map <a-5> tab_open 5
3085 map <a-6> tab_open 6
3086 map <a-7> tab_open 7
3087 map <a-8> tab_open 8
3088 map <a-9> tab_open 9
3091 map or toggle_option sort_reverse
3092 map os chain set sort=size; set sort_reverse=False
3093 map ob chain set sort=basename; set sort_reverse=False
3094 map on chain set sort=natural; set sort_reverse=False
3095 map om chain set sort=mtime; set sort_reverse=False
3096 map oc chain set sort=ctime; set sort_reverse=False
3097 map oa chain set sort=atime; set sort_reverse=False
3098 map ot chain set sort=type; set sort_reverse=False
3100 map oS chain set sort=size; set sort_reverse=True
3101 map oB chain set sort=basename; set sort_reverse=True
3102 map oN chain set sort=natural; set sort_reverse=True
3103 map oM chain set sort=mtime; set sort_reverse=True
3104 map oC chain set sort=ctime; set sort_reverse=True
3105 map oA chain set sort=atime; set sort_reverse=True
3106 map oT chain set sort=type; set sort_reverse=True
3108 map dc get_cumulative_size
3111 map zc toggle_option collapse_preview
3112 map zd toggle_option sort_directories_first
3113 map zh toggle_option show_hidden
3114 map <C-h> toggle_option show_hidden
3115 map zi toggle_option flushinput
3116 map zm toggle_option mouse_enabled
3117 map zp toggle_option preview_files
3118 map zP toggle_option preview_directories
3119 map zs toggle_option sort_case_insensitive
3120 map zu toggle_option autoupdate_cumulative_size
3121 map zv toggle_option use_preview_script
3122 map zf console filter
3125 map `<any> enter_bookmark %any
3126 map '<any> enter_bookmark %any
3127 map m<any> set_bookmark %any
3128 map um<any> unset_bookmark %any
3130 map m<bg> draw_bookmarks
3131 copymap m<bg> um<bg> `<bg> '<bg>
3133 # Generate all the chmod bindings with some python help:
3134 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3135 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3136 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3137 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3138 eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3140 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3141 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3142 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3143 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3144 eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3146 # ===================================================================
3147 # == Define keys for the console
3148 # ===================================================================
3149 # Note: Unmapped keys are passed directly to the console.
3152 cmap <tab> eval fm.ui.console.tab()
3153 cmap <s-tab> eval fm.ui.console.tab(-1)
3154 cmap <ESC> eval fm.ui.console.close()
3155 cmap <CR> eval fm.ui.console.execute()
3156 cmap <C-l> redraw_window
3158 copycmap <ESC> <C-c>
3162 cmap <up> eval fm.ui.console.history_move(-1)
3163 cmap <down> eval fm.ui.console.history_move(1)
3164 cmap <left> eval fm.ui.console.move(left=1)
3165 cmap <right> eval fm.ui.console.move(right=1)
3166 cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3167 cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3170 cmap <backspace> eval fm.ui.console.delete(-1)
3171 cmap <delete> eval fm.ui.console.delete(0)
3172 cmap <C-w> eval fm.ui.console.delete_word()
3173 cmap <C-k> eval fm.ui.console.delete_rest(1)
3174 cmap <C-u> eval fm.ui.console.delete_rest(-1)
3175 cmap <C-y> eval fm.ui.console.paste()
3177 # And of course the emacs way
3179 copycmap <down> <C-n>
3180 copycmap <left> <C-b>
3181 copycmap <right> <C-f>
3182 copycmap <home> <C-a>
3183 copycmap <end> <C-e>
3184 copycmap <delete> <C-d>
3185 copycmap <backspace> <C-h>
3187 # Note: There are multiple ways to express backspaces. <backspace> (code 263)
3188 # and <backspace2> (code 127). To be sure, use both.
3189 copycmap <backspace> <backspace2>
3191 # This special expression allows typing in numerals:
3192 cmap <allow_quantifiers> false
3194 # ===================================================================
3195 # == Pager Keybindings
3196 # ===================================================================
3199 pmap <down> pager_move down=1
3200 pmap <up> pager_move up=1
3201 pmap <left> pager_move left=4
3202 pmap <right> pager_move right=4
3203 pmap <home> pager_move to=0
3204 pmap <end> pager_move to=-1
3205 pmap <pagedown> pager_move down=1.0 pages=True
3206 pmap <pageup> pager_move up=1.0 pages=True
3207 pmap <C-d> pager_move down=0.5 pages=True
3208 pmap <C-u> pager_move up=0.5 pages=True
3210 copypmap <UP> k <C-p>
3211 copypmap <DOWN> j <C-n> <CR>
3218 copypmap <PAGEDOWN> n f <C-F> <Space>
3219 copypmap <PAGEUP> p b <C-B>
3222 pmap <ESC> pager_close
3223 copypmap <ESC> q Q i <F3>
3226 # ===================================================================
3227 # == Taskview Keybindings
3228 # ===================================================================
3231 tmap <up> taskview_move up=1
3232 tmap <down> taskview_move down=1
3233 tmap <home> taskview_move to=0
3234 tmap <end> taskview_move to=-1
3235 tmap <pagedown> taskview_move down=1.0 pages=True
3236 tmap <pageup> taskview_move up=1.0 pages=True
3237 tmap <C-d> taskview_move down=0.5 pages=True
3238 tmap <C-u> taskview_move up=0.5 pages=True
3240 copytmap <UP> k <C-p>
3241 copytmap <DOWN> j <C-n> <CR>
3245 copytmap <PAGEDOWN> n f <C-F> <Space>
3246 copytmap <PAGEUP> p b <C-B>
3248 # Changing priority and deleting tasks
3249 tmap J eval -q fm.ui.taskview.task_move(-1)
3250 tmap K eval -q fm.ui.taskview.task_move(0)
3251 tmap dd eval -q fm.ui.taskview.task_remove()
3252 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3253 tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3254 tmap <delete> eval -q fm.ui.taskview.task_remove()
3257 tmap <ESC> taskview_close
3258 copytmap <ESC> q Q w <C-c>
3263 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3266 #+begin_src sh :tangle no
3267 # ranger supports enhanced previews. If the option "use_preview_script"
3268 # is set to True and this file exists, this script will be called and its
3269 # output is displayed in ranger. ANSI color codes are supported.
3271 # NOTES: This script is considered a configuration file. If you upgrade
3272 # ranger, it will be left untouched. (You must update it yourself.)
3273 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3275 # Meanings of exit codes:
3276 # code | meaning | action of ranger
3277 # -----+------------+-------------------------------------------
3278 # 0 | success | success. display stdout as preview
3279 # 1 | no preview | failure. display no preview at all
3280 # 2 | plain text | display the plain content of the file
3281 # 3 | fix width | success. Don't reload when width changes
3282 # 4 | fix height | success. Don't reload when height changes
3283 # 5 | fix both | success. Don't ever reload
3285 # Meaningful aliases for arguments:
3286 path="$1" # Full path of the selected file
3287 width="$2" # Width of the preview pane (number of fitting characters)
3288 height="$3" # Height of the preview pane (number of fitting characters)
3290 maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3292 # Find out something about the file:
3293 mimetype=$(file --mime-type -Lb "$path")
3294 extension=${path##*.}
3297 # runs a command and saves its output into $output. Useful if you need
3298 # the return value AND want to use the output in a pipe
3299 try() { output=$(eval '"$@"'); }
3301 # writes the output of the previouosly used "try" command
3302 dump() { echo "$output"; }
3304 # a common post-processing function used after most commands
3305 trim() { head -n "$maxln"; }
3307 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3308 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3310 case "$extension" in
3311 # Archive extensions:
3312 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3313 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3314 try als "$path" && { dump | trim; exit 0; }
3315 try acat "$path" && { dump | trim; exit 3; }
3316 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3319 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3322 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3323 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3326 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3329 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3330 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3331 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3332 ;; # fall back to highlight/cat if the text browsers fail
3336 # Syntax highlight for text files:
3338 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3339 # Ascii-previews of images:
3341 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3342 # Display information about media files:
3344 exiftool "$path" && exit 5
3345 # Use sed to remove spaces so the output fits into the narrow window
3346 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3354 :header-args+: :tangle ~/.config/redshift.conf :comments none
3358 ; Global settings for redshift
3360 ; Set the day and night screen temperatures (Neutral is 6500K)
3371 ; Enable/Disable a smooth transition between day and night
3372 ; 0 will cause a direct change from day to night screen temperature.
3373 ; 1 will gradually increase or decrease the screen temperature.
3376 ; Set the screen brightness. Default is 1.0.
3378 ; It is also possible to use different settings for day and night
3379 ; since version 1.8.
3381 ;brightness-night=0.4
3382 ; Set the screen gamma (for all colors, or each color channel
3387 ; This can also be set individually for day and night since
3389 ;gamma-day=0.8:0.7:0.8
3392 ; Set the location-provider: 'geoclue2' or 'manual'
3393 ; type 'redshift -l list' to see possible values.
3394 ; The location provider settings are in a different section.
3395 ;location-provider=manual
3396 location-provider=geoclue2
3398 ; Set the adjustment-method: 'randr', 'vidmode'
3399 ; type 'redshift -m list' to see all possible values.
3400 ; 'randr' is the preferred method, 'vidmode' is an older API.
3401 ; but works in some cases when 'randr' does not.
3402 ; The adjustment method settings are in a different section.
3403 adjustment-method=randr
3405 ; Configuration of the location-provider:
3406 ; type 'redshift -l PROVIDER:help' to see the settings.
3407 ; ex: 'redshift -l manual:help'
3408 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3409 ; are negative numbers.
3414 ; Configuration of the adjustment-method
3415 ; type 'redshift -m METHOD:help' to see the settings.
3416 ; ex: 'redshift -m randr:help'
3417 ; In this example, randr is configured to adjust screen 1.
3418 ; Note that the numbering starts from 0, so this is actually the
3419 ; second screen. If this option is not specified, Redshift will try
3420 ; to adjust _all_ screens.
3427 :header-args+: :tangle ~/.config/rofi/config
3431 rofi.font: Ubuntu Mono 13
3432 ! rofi.font: Inconsolata 16
3433 ! rofi.font: Iosevka 13
3434 ! rofi.font: Source Code Pro 11
3435 rofi.modi: run,window
3443 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3444 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3445 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3447 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3452 :header-args+: :tangle ~/.config/rofi-pass/config
3456 # permanently set alternative root dir
3457 # root=/path/to/root
3459 # rofi command. Make sure to have "$@" as last argument
3461 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3462 rofi -i -no-auto-select "$@"
3465 # xdotool needs the keyboard layout to be set using setxkbmap
3466 # You can do this in your autostart scripts (e.g. xinitrc)
3468 # If for some reason, you cannot do this, you can set the command here.
3469 # and set fix_layout to true
3478 USERNAME_field='user'
3479 AUTOTYPE_field='autotype'
3481 # delay to be used for :delay keyword
3484 ## Programs to be used
3493 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3496 default_autotype='user :tab pass'
3498 # color of the help messages
3499 # leave empty for autodetection
3500 help_color="#4872FF"
3502 # Clipboard settings
3503 # Possible options: primary, clipboard, both
3506 # Options for generating new password entries
3507 # default_user is also used for password files that have no user field.
3509 default_user2=aminban
3512 # Custom Keybindings
3537 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3538 # ------------------------------------------------------------------------------
3539 # tlp - Parameters for power saving
3540 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3542 # Hint: some features are disabled by default, remove the leading # to enable
3545 # Set to 0 to disable, 1 to enable TLP.
3548 # Operation mode when no power supply can be detected: AC, BAT.
3549 # Concerns some desktop and embedded hardware only.
3552 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3553 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3554 TLP_PERSISTENT_DEFAULT=0
3556 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3557 # Non-zero value enables, zero disables laptop mode.
3558 DISK_IDLE_SECS_ON_AC=0
3559 DISK_IDLE_SECS_ON_BAT=2
3561 # Dirty page values (timeouts in secs).
3562 MAX_LOST_WORK_SECS_ON_AC=15
3563 MAX_LOST_WORK_SECS_ON_BAT=60
3565 # Hint: CPU parameters below are disabled by default, remove the leading #
3566 # to enable them, otherwise kernel default values are used.
3568 # Select a CPU frequency scaling governor.
3569 # Intel Core i processor with intel_pstate driver:
3570 # powersave(*), performance.
3571 # Older hardware with acpi-cpufreq driver:
3572 # ondemand(*), powersave, performance, conservative, schedutil.
3573 # (*) is recommended.
3574 # Hint: use tlp-stat -p to show the active driver and available governors.
3576 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
3577 # efficient for *almost all* workloads and therefore kernel and most
3578 # distributions have chosen them as defaults. If you still want to change,
3579 # you should know what you're doing! You *must* disable your distribution's
3580 # governor settings or conflicts will occur.
3581 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3582 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3584 # Set the min/max frequency available for the scaling governor.
3585 # Possible values strongly depend on your CPU. For available frequencies see
3586 # the output of tlp-stat -p.
3587 #CPU_SCALING_MIN_FREQ_ON_AC=0
3588 #CPU_SCALING_MAX_FREQ_ON_AC=0
3589 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3590 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3592 # Set energy performance hints (HWP) for Intel P-state governor:
3593 # performance, balance_performance, default, balance_power, power
3594 # Values are given in order of increasing power saving.
3595 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3596 CPU_HWP_ON_AC=balance_performance
3597 CPU_HWP_ON_BAT=balance_power
3599 # Set Intel P-state performance: 0..100 (%).
3600 # Limit the max/min P-state to control the power dissipation of the CPU.
3601 # Values are stated as a percentage of the available performance.
3602 # Requires an Intel Core i processor with intel_pstate driver.
3603 #CPU_MIN_PERF_ON_AC=0
3604 #CPU_MAX_PERF_ON_AC=100
3605 #CPU_MIN_PERF_ON_BAT=0
3606 #CPU_MAX_PERF_ON_BAT=30
3608 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3609 # Requires an Intel Core i processor.
3611 # - This may conflict with your distribution's governor settings
3612 # - A value of 1 does *not* activate boosting, it just allows it
3616 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3617 # 0=disable, 1=enable.
3618 SCHED_POWERSAVE_ON_AC=0
3619 SCHED_POWERSAVE_ON_BAT=1
3621 # Kernel NMI Watchdog:
3622 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
3625 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3626 # Frequency voltage pairs are written to:
3627 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3628 # CAUTION: only use this, if you thoroughly understand what you are doing!
3629 #PHC_CONTROLS="F:V F:V F:V F:V"
3631 # Set CPU performance versus energy savings policy:
3632 # performance, balance-performance, default, balance-power, power.
3633 # Values are given in order of increasing power saving.
3634 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3635 ENERGY_PERF_POLICY_ON_AC=performance
3636 ENERGY_PERF_POLICY_ON_BAT=balance-power
3638 # Disk devices; separate multiple devices with spaces (default: sda).
3639 # Devices can be specified by disk ID also (lookup with: tlp diskid).
3640 DISK_DEVICES="sda sdb"
3642 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
3643 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
3644 # Separate values for multiple disks with spaces. Use the special value 'keep'
3645 # to keep the hardware default for the particular disk.
3646 DISK_APM_LEVEL_ON_AC="254 254"
3647 DISK_APM_LEVEL_ON_BAT="128 128"
3649 # Hard disk spin down timeout:
3650 # 0: spin down disabled
3651 # 1..240: timeouts from 5s to 20min (in units of 5s)
3652 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3653 # See 'man hdparm' for details.
3654 # Separate values for multiple disks with spaces. Use the special value 'keep'
3655 # to keep the hardware default for the particular disk.
3656 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3657 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3659 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3660 # Separate values for multiple disks with spaces. Use the special value 'keep'
3661 # to keep the kernel default scheduler for the particular disk.
3662 #DISK_IOSCHED="cfq cfq"
3664 # AHCI link power management (ALPM) for disk devices:
3665 # min_power, med_power_with_dipm(*), medium_power, max_performance.
3666 # (*) Kernel >= 4.15 required, then recommended.
3667 # Multiple values separated with spaces are tried sequentially until success.
3668 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3669 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3671 # Exclude host devices from AHCI link power management.
3672 # Separate multiple hosts with spaces.
3673 #SATA_LINKPWR_BLACKLIST="host1"
3675 # Runtime Power Management for AHCI host and disks devices:
3676 # on=disable, auto=enable.
3677 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3678 #AHCI_RUNTIME_PM_ON_AC=on
3679 #AHCI_RUNTIME_PM_ON_BAT=on
3681 # Seconds of inactivity before disk is suspended.
3682 AHCI_RUNTIME_PM_TIMEOUT=15
3684 # PCI Express Active State Power Management (PCIe ASPM):
3685 # default, performance, powersave.
3686 PCIE_ASPM_ON_AC=performance
3687 PCIE_ASPM_ON_BAT=powersave
3689 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3690 # auto = mid on BAT, high on AC; default = use hardware defaults.
3691 RADEON_POWER_PROFILE_ON_AC=high
3692 RADEON_POWER_PROFILE_ON_BAT=low
3694 # Radeon dynamic power management method (DPM): battery, performance.
3695 RADEON_DPM_STATE_ON_AC=performance
3696 RADEON_DPM_STATE_ON_BAT=battery
3698 # Radeon DPM performance level: auto, low, high; auto is recommended.
3699 RADEON_DPM_PERF_LEVEL_ON_AC=auto
3700 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3702 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3706 # Disable wake on LAN: Y/N.
3709 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3710 # A value of 0 disables, >=1 enables power saving (recommended: 1).
3711 SOUND_POWER_SAVE_ON_AC=0
3712 SOUND_POWER_SAVE_ON_BAT=0
3714 # Disable controller too (HDA only): Y/N.
3715 SOUND_POWER_SAVE_CONTROLLER=N
3717 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3718 # Drive can be powered on again by releasing (and reinserting) the eject lever
3719 # or by pressing the disc eject button on newer models.
3720 # Note: an UltraBay/MediaBay hard disk is never powered off.
3721 BAY_POWEROFF_ON_AC=0
3722 BAY_POWEROFF_ON_BAT=0
3723 # Optical drive device to power off (default sr0).
3726 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3728 RUNTIME_PM_ON_BAT=auto
3730 # Exclude PCI(e) device adresses the following list from Runtime PM
3731 # (separate with spaces). Use lspci to get the adresses (1st column).
3732 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3733 RUNTIME_PM_BLACKLIST="01:00.0"
3735 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3736 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3737 # prevents accidential power-on of dGPU in hybrid graphics setups.
3738 # Use "" to disable the feature completely.
3739 # Separate multiple drivers with spaces.
3740 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3742 # Set to 0 to disable, 1 to enable USB autosuspend feature.
3745 # Exclude listed devices from USB autosuspend (separate with spaces).
3746 # Use lsusb to get the ids.
3747 # Note: input devices (usbhid) are excluded automatically
3748 #USB_BLACKLIST="1111:2222 3333:4444"
3750 # Bluetooth devices are excluded from USB autosuspend:
3751 # 0=do not exclude, 1=exclude.
3752 USB_BLACKLIST_BTUSB=0
3754 # Phone devices are excluded from USB autosuspend:
3755 # 0=do not exclude, 1=exclude (enable charging).
3756 USB_BLACKLIST_PHONE=0
3758 # Printers are excluded from USB autosuspend:
3759 # 0=do not exclude, 1=exclude.
3760 USB_BLACKLIST_PRINTER=1
3762 # WWAN devices are excluded from USB autosuspend:
3763 # 0=do not exclude, 1=exclude.
3764 USB_BLACKLIST_WWAN=1
3766 # Include listed devices into USB autosuspend even if already excluded
3767 # by the blacklists above (separate with spaces).
3768 # Use lsusb to get the ids.
3769 #USB_WHITELIST="1111:2222 3333:4444"
3771 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3772 # (workaround for USB devices that cause shutdown problems).
3773 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3775 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3776 # on system startup: 0=disable, 1=enable.
3777 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3778 # are ignored when this is enabled!
3779 #RESTORE_DEVICE_STATE_ON_STARTUP=0
3780 RESTORE_DEVICE_STATE_ON_STARTUP=1
3782 # Radio devices to disable on startup: bluetooth, wifi, wwan.
3783 # Separate multiple devices with spaces.
3784 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3786 # Radio devices to enable on startup: bluetooth, wifi, wwan.
3787 # Separate multiple devices with spaces.
3788 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3790 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3791 # (workaround for devices that are blocking shutdown).
3792 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3794 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3795 # (to prevent other operating systems from missing radios).
3796 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3798 # Radio devices to enable on AC: bluetooth, wifi, wwan.
3799 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3801 # Radio devices to disable on battery: bluetooth, wifi, wwan.
3802 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3804 # Radio devices to disable on battery when not in use (not connected):
3805 # bluetooth, wifi, wwan.
3806 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3808 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3809 # required). Charging starts when the remaining capacity falls below the
3810 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3811 # Main / Internal battery (values in %)
3812 #START_CHARGE_THRESH_BAT0=75
3813 #STOP_CHARGE_THRESH_BAT0=80
3814 # Ultrabay / Slice / Replaceable battery (values in %)
3815 #START_CHARGE_THRESH_BAT1=75
3816 #STOP_CHARGE_THRESH_BAT1=80
3818 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3819 #RESTORE_THRESHOLDS_ON_BAT=1
3821 # ------------------------------------------------------------------------------
3822 # tlp-rdw - Parameters for the radio device wizard
3823 # Possible devices: bluetooth, wifi, wwan.
3826 # - Parameters are disabled by default, remove the leading # to enable them
3827 # - Separate multiple radio devices with spaces
3829 # Radio devices to disable on connect.
3830 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3831 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3832 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3834 # Radio devices to enable on disconnect.
3835 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3836 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3837 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3839 # Radio devices to enable/disable when docked.
3840 #DEVICES_TO_ENABLE_ON_DOCK=""
3841 #DEVICES_TO_DISABLE_ON_DOCK=""
3843 # Radio devices to enable/disable when undocked.
3844 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3845 #DEVICES_TO_DISABLE_ON_UNDOCK=""
3852 :header-args+: :tangle ~/.xprofile
3855 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
3856 contrary, it's automatically sourced by LightDM, my display manager of
3860 xset -b # disable bell
3862 # setxkbmap -option compose:ralt
3864 setxkbmap -option ctrl:nocaps # turn capslock into control
3865 setxkbmap -option altwin:swap_alt_win # swap alt and super
3867 if [ $(hostname) = "plasma" ]
3869 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
3872 if [ $(hostname) = "enigma" ]
3874 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
3877 light -Scrs "intel_backlight" 2
3879 source $HOME/.zprofile
3881 export _JAVA_AWT_WM_NONREPARENTING=1
3882 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
3884 # unlock-def-gk.py &
3886 if [ $(hostname) = "plasma" ]
3889 elif [ $(hostname) = "enigma" ]
3899 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
3902 #+begin_src conf-xdefaults
3903 #include ".Xresources.d/fonts"
3904 ! #include ".Xresources.d/colors"
3905 #include ".Xresources.d/emacs"
3906 #include ".Xresources.d/rxvt-unicode"
3913 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
3916 #+begin_src conf-xdefaults
3917 Xft.lcdfilter: lcddefault
3921 Xft.hintstyle: hintslight
3922 ! Xft.hintstyle: hintfull
3929 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
3932 #+begin_src conf-xdefaults :tangle no
3933 #include "gruvbox-light.xresources"
3934 ! #include "gruvbox-dark.xresources"
3935 #include "gruvbox-urxvt256.xresources"
3938 #+begin_src conf-xdefaults :tangle no
3939 ! -----------------------------------------------------------------------------
3940 ! File: gruvbox-light.xresources
3941 ! Description: Retro groove colorscheme generalized
3942 ! Author: morhetz <morhetz@gmail.com>
3943 ! Source: https://github.com/morhetz/gruvbox-generalized
3944 ! Last Modified: 6 Sep 2014
3945 ! -----------------------------------------------------------------------------
3947 ! hard contrast: *background: #f9f5d7
3948 *background: #fbf1c7
3949 ! soft contrast: *background: #f2e5bc
3950 *foreground: #3c3836
3960 ! DarkYellow + Yellow
3966 ! DarkMagenta + Magenta
3977 #+begin_src conf-xdefaults :tangle no
3978 ! -----------------------------------------------------------------------------
3979 ! File: gruvbox-dark.xresources
3980 ! Description: Retro groove colorscheme generalized
3981 ! Author: morhetz <morhetz@gmail.com>
3982 ! Source: https://github.com/morhetz/gruvbox-generalized
3983 ! Last Modified: 6 Sep 2014
3984 ! -----------------------------------------------------------------------------
3986 ! hard contrast: *background: #1d2021
3987 *background: #282828
3988 ! soft contrast: *background: #32302f
3989 *foreground: #ebdbb2
3999 ! DarkYellow + Yellow
4005 ! DarkMagenta + Magenta
4016 #+begin_src conf-xdefaults :tangle no
4017 ! -----------------------------------------------------------------------------
4018 ! File: gruvbox-urxvt256.xresources
4019 ! Description: Retro groove colorscheme generalized
4020 ! Author: morhetz <morhetz@gmail.com>
4021 ! Source: https://github.com/morhetz/gruvbox-generalized
4022 ! Last Modified: 13 Dec 2013
4023 ! -----------------------------------------------------------------------------
4025 URxvt.color24: #076678
4026 URxvt.color66: #427b58
4027 URxvt.color88: #9d0006
4028 URxvt.color96: #8f3f71
4029 URxvt.color100: #79740e
4030 URxvt.color108: #8ec07c
4031 URxvt.color109: #83a598
4032 URxvt.color130: #af3a03
4033 URxvt.color136: #b57614
4034 URxvt.color142: #b8bb26
4035 URxvt.color167: #fb4934
4036 URxvt.color175: #d3869b
4037 URxvt.color208: #fe8019
4038 URxvt.color214: #fabd2f
4039 URxvt.color223: #ebdbb2
4040 URxvt.color228: #f2e5bc
4041 URxvt.color229: #fbf1c7
4042 URxvt.color230: #f9f5d7
4043 URxvt.color234: #1d2021
4044 URxvt.color235: #282828
4045 URxvt.color236: #32302f
4046 URxvt.color237: #3c3836
4047 URxvt.color239: #504945
4048 URxvt.color241: #665c54
4049 URxvt.color243: #7c6f64
4050 URxvt.color244: #928374
4051 URxvt.color245: #928374
4052 URxvt.color246: #a89984
4053 URxvt.color248: #bdae93
4054 URxvt.color250: #d5c4a1
4059 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4062 #+begin_src conf-xdefaults
4065 Emacs.verticalScrollBars: off
4066 Emacs.cursorBlink: off
4067 Emacs.FontBackend: xft,x
4068 ! Emacs.font: Ubuntu Mono-12
4069 ! Emacs.font: Triplicate T4C-11
4070 ! Emacs.font: Ubuntu Mono-10.5
4071 ! Emacs.font: Ubuntu Mono-12
4072 ! Emacs.font: Iosevka-11
4074 ! Emacs.font: Fira Mono:size=15
4075 ! Emacs.font: DejaVu Sans Mono:size=15
4076 ! Emacs.font: Inconsolata:size=17
4077 ! Emacs.font: Inconsolata:size=16
4078 ! Emacs.font: Inconsolata LGC:size=14
4079 ! Emacs.font: Source Code Pro Medium-10.5
4080 Emacs.font: Ubuntu Mono:size=16
4081 ! Emacs.font: Iosevka:size=16
4086 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4089 #+begin_src conf-xdefaults
4091 URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4092 URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4093 URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4094 URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4096 URxvt.xftAntialias: true
4097 URxvt.letterSpace: 0
4100 URxvt.loginShell: true
4101 URxvt.saveLines: 100000
4102 URxvt.internalBorder: 3
4104 URxvt.scrollBar: false
4105 URxvt.scrollStyle: rxvt
4106 URxvt*scrollTtyOutput: false
4107 URxvt*scrollWithBuffer: true
4108 URxvt*scrollTtyKeypress: true
4109 URxvt.keysym.Shift-Up: command:\033]720;1\007
4110 URxvt.keysym.Shift-Down: command:\033]721;1\007
4112 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4113 URxvt.perl-ext: bidi
4114 URxvt.bidi.enabled: 1
4115 URxvt.url-select.launcher: firefox
4116 URxvt.url-select.underline: true
4117 URxvt.keysym.M-u: perl:url-select:select_next
4118 URxvt.keysym.M-Escape: perl:keyboard-select:activate
4119 URxvt.keysym.M-s: perl:keyboard-select:search
4120 URxvt.url-launcher: /usr/bin/firefox
4121 URxvt.matcher.button: 1
4122 URxvt.iso14755: false
4123 URxvt.iso14755_53: false
4124 URxvt.keysym.M-c: perl:clipboard:copy
4125 URxvt.keysym.M-v: perl:clipboard:paste
4126 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4127 URxvt.keysym.C-Up: font-size:increase
4128 URxvt.keysym.C-Down: font-size:decrease
4129 URxvt.keysym.C-S-Up: font-size:incglobal
4130 URxvt.keysym.C-S-Down: font-size:decglobal
4131 URxvt.keysym.C-equal: font-size:reset
4132 !URxvt.keysym.C-question: font-size:show
4134 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4136 !urxvt*foreground: white
4137 !urxvt*background: black
4156 !URxvt.foreground: #C8C8C8
4157 !URxvt.background: #FFFFFF
4177 !! orange (replaces cyan)
4184 ! Tango colour theme for rxvt-unicode
4185 URxvt.background: #FFFFFF
4186 URxvt.foreground: #000000
4189 URxvt.color0: #2E3436
4190 URxvt.color8: #757773
4193 URxvt.color1: #CC0000
4194 URxvt.color9: #EF2929
4197 URxvt.color2: #4E9A06
4198 URxvt.color10: #8AE234
4201 URxvt.color3: #C4A000
4202 URxvt.color11: #FCE94F
4205 URxvt.color4: #3465A4
4206 URxvt.color12: #729FCF
4209 URxvt.color5: #75507B
4210 URxvt.color13: #AD7FA8
4213 !URxvt.color6: #06989A
4214 !URxvt.color14: #34E2E2
4215 ! orange (replaces cyan)
4220 URxvt.color7: #D3D7CF
4221 URxvt.color15: #EEEEEC
4226 :header-args+: :tangle ~/.config/user-dirs.dirs
4230 XDG_DESKTOP_DIR="$HOME/Desktop"
4231 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4232 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4233 XDG_MUSIC_DIR="$HOME/usr/music"
4234 XDG_PICTURES_DIR="$HOME/usr/pics"
4235 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4236 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4237 XDG_VIDEOS_DIR="$HOME/usr/vids"
4242 :header-args+: :tangle ~/.config/zathura/zathurarc
4246 set smooth-scroll true
4247 set selection-clipboard clipboard
4249 set default-bg "#272727"
4250 set statusbar-bg "#272727"
4251 set inputbar-bg "#373737"
4256 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4257 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4262 :header-args+: :tangle ~/.zimrc
4276 # Select what modules you would like enabled.
4277 # The second line of modules may depend on options set by modules in the first
4278 # line. These dependencies are noted on the respective module's README.md.
4279 zmodules=(directory environment git git-info history input ssh utility custom \
4280 syntax-highlighting history-substring-search prompt completion)
4291 # Set your desired prompt here
4292 zprompt_theme='pure'
4293 #PURE_PROMPT_SYMBOL=λ
4294 #PURE_PROMPT_SYMBOL=δ
4295 PURE_PROMPT_SYMBOL=➜
4301 # set an optional host-specific filename for the completion cache file
4302 # if none is provided, the default '.zcompdump' is used.
4303 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4309 # Uncomment to enable command correction prompts
4310 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4317 # Set the string below to the desired terminal title format string.
4318 # The terminal title is redrawn upon directory change, however, variables like
4319 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4320 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4321 # The example below uses the following format: 'username@host:/current/directory'
4322 ztermtitle='%n@%m:%~'
4328 # Uncomment to enable double-dot expansion.
4329 # This appends '../' to your input for each '.' you type after an initial '..'
4330 #zdouble_dot_expand='true'
4333 # Syntax-Highlighting
4336 # This determines what highlighters will be used with the syntax-highlighting module.
4337 # Documentation of the highlighters can be found here:
4338 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4339 # For (u)rxvt, termite and gnome-terminal users,
4340 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4341 #zhighlighters=(main brackets cursor)
4342 zhighlighters=(main brackets pattern)
4349 # Load these ssh identities with the ssh module
4350 zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4357 # Set (optional) pacman front-end.
4358 zpacman_frontend='yay'
4360 # Load any helper scripts as defined here
4361 #zpacman_helper=(aur)
4366 :header-args+: :tangle ~/.zlogin
4373 # User configuration sourced by login shells
4377 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4382 :header-args+: :tangle ~/.zprofile
4386 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4387 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4388 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4389 export XDG_CONFIG_HOME=$HOME/.config
4390 export XDG_DATA_HOME=$HOME/.local/share
4391 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4392 export MAILDIR="$HOME/mail"
4394 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4395 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4396 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4399 #export JAVA_HOME=/usr/lib/jvm/default
4400 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4401 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4402 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4404 #export PATH="$HOME/usr/build/pvs:$PATH"
4405 #export SBCLISP_HOME=/usr/share/sbcl-source
4406 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4408 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4410 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4411 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4413 #if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4418 :header-args+: :tangle ~/.zshenv
4422 # Ensure that a non-login, non-interactive shell has a defined environment.
4423 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4424 source "${ZDOTDIR:-$HOME}/.zprofile"
4430 :header-args+: :tangle ~/.zshrc
4434 # Bash-like navigation
4435 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4436 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4437 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4438 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4440 #disable -r time # disable shell reserved word
4441 #alias time='time -p' # -p for POSIX output
4443 # rehash if last command was pacaur or pacman
4444 # (so that zsh picks up changes in $PATH immediately)
4445 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4448 # User configuration sourced by interactive shells
4451 # Change default zim location
4452 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4455 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4457 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4458 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4462 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4463 source ~/.zsh/zsh-autopair/autopair.zsh
4468 source /usr/share/fzf/key-bindings.zsh
4469 source /usr/share/fzf/completion.zsh
4471 # Accept history selection instead of putting it on
4473 fzf-history-widget-accept() {
4477 #zle -N fzf-history-widget-accept
4478 #bindkey '^R' fzf-history-widget-accept
4481 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4487 alias mpv="mpv --ytdl-format mp4"
4491 alias jcl=journalctl
4492 alias m="mbsync -Va; getmail; notmuch new"
4493 alias best="youtube-dl -f best"
4494 alias ace="mosh amin@ace.aminb.org"
4495 alias nix="ssh amin@aminb.org"
4499 git clone https://aur.archlinux.org/${1}.git
4510 This section contains various useful scripts and the ones used by the
4511 programs above. For instance, =toggle-tablet= for switching to and
4512 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4513 Xfce's presentation mode which keeps the screen awake, and
4514 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4515 exact brightness value.
4519 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4524 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
4530 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4534 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4536 if [ "$lang" = "us" ]; then
4540 # xmodmap $HOME/.Xmodmap
4544 ** toggle-presentation-mode
4546 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4550 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4555 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4559 import gnomekeyring as gk
4560 # list_item_ids_sync('login')[0] == 1L
4561 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4566 My little wallpaper changer script.
4570 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4573 #+begin_src bash :tangle no
4578 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4581 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4584 echo $"Usage: $0 {day|night}"
4591 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4594 #+begin_src bash :tangle no
4603 echo "Did not find 'sed', script cannot continue."
4608 echo "Did not find rofi, there is no point to continue."
4613 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4614 # Repeated calls should leave the config clean-ish
4616 function set_theme()
4618 CDIR="${HOME}/.config/rofi/"
4619 if [ ! -d "${CDIR}" ]
4623 if [ -f "${CDIR}/config" ]
4625 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4627 echo "rofi.theme: ${1}" >> "${CDIR}/config"
4631 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4633 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4634 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4635 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4637 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4638 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4639 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4645 :header-args+: :tangle ~/.config/systemd/user/wp.service
4648 #+begin_src conf :tangle no
4650 Description=wallpaper service
4654 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4659 :header-args+: :tangle ~/.config/systemd/user/wp.timer
4662 #+begin_src conf :tangle no
4665 Description=wallpaper timer
4673 WantedBy=timers.target
4678 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
4684 zathura --synctex-forward "$pos" "$pdffile" || \
4686 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
4687 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
4693 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
4697 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4698 # [ESC] character in original post removed here.
4700 # ANSI Color -- use these variables to easily have different color
4701 # and format output. Make sure to output the reset sequence after
4702 # colors (f = foreground, b = background), and use the 'off'
4703 # feature for anything you turn on.
4707 esc="$(echo -en '\e')"
4709 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
4710 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
4711 cyanf="${esc}[36m"; whitef="${esc}[37m"
4713 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
4714 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
4715 cyanb="${esc}[46m"; whiteb="${esc}[47m"
4717 boldon="${esc}[1m"; boldoff="${esc}[22m"
4718 italicson="${esc}[3m"; italicsoff="${esc}[23m"
4719 ulon="${esc}[4m"; uloff="${esc}[24m"
4720 invon="${esc}[7m"; invoff="${esc}[27m"
4725 # note in this first use that switching colors doesn't require a reset
4726 # first - the new color overrides the old one.
4734 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
4735 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4736 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4737 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
4738 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
4739 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
4741 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
4742 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4743 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4744 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
4745 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
4746 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
4753 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
4758 # ANSI color scheme script featuring Space Invaders
4760 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4761 # Modified by lolilolicon
4767 printf -v $j$i %b "\e[${!j}${i}m"
4775 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4776 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4777 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
4778 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
4780 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4781 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4782 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
4783 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
projects / ~bandali / configs / blob