[emacs] update 3 drones
[~bandali/configs] / rc.org
1 #+title: rc.org
2 #+property: header-args :comments link :mkdirp yes :results silent
3
4 * About
5
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
9
10 Note: This file is best viewed inside Emacs with org mode.
11
12 * Configs
13
14 This section contains the configuration files (dotfiles) of various
15 programs I use.
16
17 ** bspwm
18
19 *** bspwmrc
20 :PROPERTIES:
21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22 :END:
23
24 #+begin_src sh :tangle no
25 sxhkd &
26 sh ~/.fehbg &
27 xfce4-panel -d &
28 compton &
29 sleep 0.5 && pasystray --notify=all &
30
31 bspc monitor -d I II III IV V VI VII VIII IX X
32 #bspc monitor eDP-1 -d I II III IV V
33 #bspc monitor HDMI-1 -d VI VII VIII IX X
34
35 #bspc config border_width 2
36 #bspc config window_gap 8
37 bspc config window_gap 0
38
39 bspc config bottom_padding 26
40
41 bspc config split_ratio 0.52
42 bspc config borderless_monocle true
43 bspc config gapless_monocle true
44 bspc config click_to_focus button1
45 bspc config directional_focus_tightness low
46
47 #bspc rule -a Firefox desktop='^1' follow=on
48 bspc rule -a Nightly desktop='^1' follow=on
49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
50 #bspc rule -a Chromium desktop='^4' follow=on
51 bspc rule -a URxvt state=floating
52 bspc rule -a URxvt:tiled state=tiled
53 bspc rule -a Connman-gtk state=floating
54 bspc rule -a Xfce4-panel state=floating
55 bspc rule -a TelegramDesktop state=floating
56 bspc rule -a Ec state=floating
57 bspc rule -a Pavucontrol state=floating
58 bspc rule -a Eog state=floating
59 bspc rule -a Seahorse state=floating
60 bspc rule -a mpv state=floating
61 bspc rule -a Evince state=floating
62 bspc rule -a Meld state=floating
63 bspc rule -a Autokey-gtk state=floating
64 bspc rule -a Mousepad state=floating
65 bspc rule -a Wrapper-1.0 state=floating
66 bspc rule -a File-roller state=floating
67 bspc rule -a Gnome-disks state=floating
68 bspc rule -a Termite state=floating
69 bspc rule -a Termite:tiled state=tiled
70 bspc rule -a Thunderbird:Calendar state=floating
71 bspc rule -a Audacity state=floating
72 bspc rule -a Proof state=floating # pvs x-show-proof
73 bspc rule -a Nm-connection-editor state=floating
74 bspc rule -a Wire state=floating
75 bspc rule -a discord state=floating
76 bspc rule -a X2goclient state=floating
77 bspc rule -a SimpleScreenRecorder state=floating
78 bspc rule -a Gimp state=floating
79 bspc rule -a Wrapper-2.0 state=floating
80 bspc rule -a Zathura state=tiled
81 #+end_src
82
83 *** sxhkdrc
84 :PROPERTIES:
85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86 :END:
87
88 #+begin_src conf :tangle no
89 #
90 # wm independent hotkeys
91 #
92
93 # terminal emulator
94 super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97 #super + {_,shift} + Return
98 # termite{_, --name=tiled}
99
100 # program launcher
101 super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104 super + alt + space
105 xfce4-popup-whiskermenu
106
107 # window finder
108 super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111 # password manager
112 alt + space
113 rofi-pass
114
115 # firefox
116 #super + r
117 # firefox
118
119 # chromium
120 #super + c
121 # chromium -incognito
122
123 # emacs
124 super + e
125 emacs
126
127 # make sxhkd reload its configuration files:
128 super + Escape
129 pkill -USR1 -x sxhkd
130
131 # volume {up,down}
132 XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135 # mute
136 XF86AudioMute
137 pamixer --toggle-mute
138
139 XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142 # playback control
143 XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146 # lock the screen
147 super + shift + q
148 light-locker-command -l
149
150 # Toggle keyboard layout
151 super + F7
152 toggle-layout
153
154 # Toggle Xfce presentation mode
155 XF86LaunchB
156 toggle-presentation-mode
157
158 # monitor brightness
159 XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162 super + apostrophe
163 rofi-light
164
165 # keyboard brightness
166 #XF86KbdBrightness{Up,Down}
167 # kbdlight {up,down}
168
169 XF86RotateWindows
170 toggle-tablet
171
172 #
173 # bspwm hotkeys
174 #
175
176 # quit bspwm normally
177 super + alt + Escape
178 bspc quit
179
180 # close and kill
181 super + {w,q}
182 bspc node -{c,k}
183
184 # alternate between the tiled and monocle layout
185 super + m
186 bspc desktop -l next
187
188 # send the newest marked node to the newest preselected node
189 super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192 # swap the current node and the biggest node
193 super + g
194 bspc node -s biggest
195
196 #
197 # state/flags
198 #
199
200 # set the window state
201 super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204 # set the node flags
205 super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208 #
209 # focus/swap
210 #
211
212 # focus the node in the given direction
213 super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216 # focus the node for the given path jump
217 super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220 # focus the next/previous node in the current desktop
221 super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224 # focus the next/previous desktop in the current monitor
225 super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228 # send to next/prev desktop
229 super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232 # focus the last node/desktop
233 super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236 # focus the older or newer node in the focus history
237 super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242 # focus or send to the given desktop
243 super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246 #
247 # preselect
248 #
249
250 # preselect the direction
251 super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254 # preselect the ratio
255 super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258 # cancel the preselection for the focused node
259 super + ctrl + space
260 bspc node -p cancel
261
262 # cancel the preselection for the focused desktop
263 super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266 #
267 # move/resize
268 #
269
270 # expand a window by moving one of its side outward
271 super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274 # contract a window by moving one of its side inward
275 super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278 # move a floating window
279 super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282 #alt + bracket{left,right}
283 # xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284 #+end_src
285
286 ** compton
287 :PROPERTIES:
288 :header-args+: :tangle ~/.config/compton.conf
289 :END:
290
291 #+begin_src conf :tangle no
292 # Shadow
293 shadow = false; # Enabled client-side shadows on windows.
294 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295 no-dnd-shadow = true; # Don't draw shadows on DND windows.
296 clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298 shadow-radius = 5; # The blur radius for shadows. (default 12)
299 shadow-offset-x = -5; # The left offset for shadows. (default -15)
300 shadow-offset-y = -5; # The top offset for shadows. (default -15)
301 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306 # shadow-exclude = "n:e:Notification";
307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311 # Opacity
312 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323 # blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326 # blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332 # Fading
333 fading = false; # Fade windows during opacity changes.
334 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338 fade-exclude = [ ]; # Exclude conditions for fading.
339
340 # Other
341 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355 dbe = false; # Enable DBE painting mode. Rarely needed.
356 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368 # GLX backend # GLX backend fine-tune options. See man page for more info.
369 glx-no-stencil = true; # Recommended.
370 glx-copy-from-front = false; # Useful with --glx-swap-method,
371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372 # glx-no-rebind-pixmap = true; # Recommended if it works.
373 glx-no-rebind-pixmap = true; # Recommended if it works.
374 #glx-swap-method = "4"; # See man page.
375 glx-swap-method = "4"; # See man page.
376
377 # Window type settings
378 wintypes:
379 {
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389 };
390 #+end_src
391
392 ** dovecot
393 :PROPERTIES:
394 :header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
395 :END:
396
397 #+begin_src conf
398 protocols = imap
399
400 listen = 127.0.0.1
401 log_path = /var/log/dovecot.log
402 info_log_path = /var/log/dovecot-info.log
403
404 ssl = no
405 disable_plaintext_auth = no
406
407 auth_verbose = yes
408 auth_mechanisms = plain
409
410 passdb {
411 driver = passwd-file
412 args = /etc/dovecot/passwd
413 }
414
415 userdb {
416 driver = static
417 args = uid=amin gid=amin home=/home/amin/mail/%d/%n
418 default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
419 }
420
421 # mail_home = /home/amin/mail/%d/%n
422 # mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
423
424 # namespace {
425 # inbox = yes
426 # separator = /
427 # }
428
429 mail_plugins = $mail_plugins fts fts_lucene
430
431 plugin {
432 fts = lucene
433 fts_lucene = whitespace_chars=@.
434 fts_autoindex = yes
435 }
436 #+end_src
437
438 ** Dunst
439 :PROPERTIES:
440 :header-args+: :tangle ~/.config/dunst/dunstrc
441 :END:
442
443 #+begin_src conf
444 [global]
445 #font = Ubuntu Mono 10.5
446 font = Inconsolata 11
447
448 # Path to default icons.
449 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
450
451 icon_position = left
452 # <b>bold</b>
453 # <i>italic</i>
454 # <s>strikethrough<s/>
455 # <u>underline</u>
456 markup = full
457 # The format of the message. Possible variables are:
458 # %a appname
459 # %s summary
460 # %b body
461 # %i iconname (including its path)
462 # %I iconname (without its path)
463 # %p progress value if set ([ 0%] to [100%]) or nothing
464 # Markup is allowed
465 format = "<b>%s</b>\n%b"
466 # Sort messages by urgency
467 sort = yes
468 # Show how many messages are currently hidden (because of geometry)
469 indicate_hiddenl= no
470 # Alignment of message text.
471 # Possible values are "left", "center" and "right"
472 alignment = center
473 # The frequency with wich text that is longer than the notification
474 # window allows bounces back and forth.
475 # This option conflicts with 'word_wrap'.
476 # Set to 0 to disable
477 bounce_freq = 3
478 # show age of message if message is older than show_age_threshold seconds.
479 # set to -1 to disable
480 show_age_threshold = -1
481 # split notifications into multiple lines if they don't fit into geometry
482 word_wrap = yes
483 # ignore newlines '\n' in notifications
484 ignore_newline = no
485 # The geometry of the message window.
486 # geometry [{width}]x{height}][+/-{x}+/-{y}]
487 # The height is measured in number of notifications everything else in pixels. If the width
488 # is omitted but the height is given ("-geometry x2"), the message window
489 # expands over the whole screen (dmenu-like). If width is 0,
490 # the window expands to the longest message displayed.
491 # A positive x is measured from the left, a negative from the
492 # right side of the screen. Y is measured from the top and down respectevly.
493 # The width can be negative. In this case the actual width is the
494 # screen width minus the width defined in within the geometry option.
495 #geometry = "410x12-12+12"
496 #geometry = "0x0-30-30"
497 geometry = "260x12-30-30"
498 # The transparency of the window. range: [0; 100]
499 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
500 transparency = 0
501 # Don't remove messages, if the user is idle (no mouse or keyboard input)
502 # for longer than idle_threshold seconds.
503 # Set to 0 to disable.
504 idle_threshold = 120
505 # Which monitor should the notifications be displayed on.
506 monitor = 0
507 # Display notification on focused monitor. Possible modes are:
508 # mouse: follow mouse pointer
509 # keyboard: follow window with keyboard focus
510 # none: don't follow anything
511 #
512 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
513 # This should be the case for almost all modern windowmanagers.
514 #
515 # If this option is set to mouse or keyboard, the monitor option will be
516 # ignored.
517 follow = keyboard
518 # should a notification popped up from history be sticky or
519 # timeout as if it would normally do.
520 sticky_history = yes
521 # The height of a single line. If the height is smaller than the font height,
522 # it will get raised to the font height.
523 # This adds empty space above and under the text.
524 line_height = 0
525
526 show_indicators = yes
527
528 # Draw a line of 'separatpr_height' pixel height between two notifications.
529 # Set to 0 to disable
530 separator_height = 3
531 # padding between text and separator
532 padding = 8
533 # horizontal padding
534 horizontal_padding = 8
535 # Define a color for the separator.
536 # possible values are:
537 # * auto: dunst tries to find a color fitting to the background
538 # * foreground: use the same color as the foreground
539 # * frame: use the same color as the frame.
540 # * anything else will be interpreted as a X color
541 separator_color = foreground
542 # print a notification on startup
543 # This is mainly for error detection, since dbus (re-)starts dunst
544 # automatically after a crash.
545 startup_notification = false
546 # dmenu path
547 #dmenu = /usr/bin/dmenu -p dunst:
548 dmenu = /usr/bin/rofi -dmenu -p dunst:
549 # browser for opening urls in context menu
550 browser = /usr/bin/firefox -new-tab
551 [frame]
552 width = 0
553 color = "#377222"
554 [shortcuts]
555 # shortcuts are specified as [modifier+][modifier+]...key
556 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
557 # and 'mod4' (windows-key)
558 # xev might be helpful to find names for keys
559 # close notification
560 close = ctrl+space
561 # close all notifications
562 close_all = ctrl+shift+space
563 # redisplay last message(s)
564 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
565 history = ctrl+shift+h
566 # context menu
567 context = ctrl+shift+period
568 [urgency_low]
569 # IMPORTANT: colors have to be defined in quotation marks.
570 # Otherwise the '#' and following would be interpreted as a comment.
571 background = "#1d2a30"
572 foreground = "#71c2af"
573 timeout = 3
574 [urgency_normal]
575 background = "#1d2a30"
576 foreground = "#71c2af"
577 timeout = 0
578 [urgency_critical]
579 background = "#1d2a30"
580 foreground = "#ff9982"
581 timeout = 0
582
583 # Every section that isn't one of the above is interpreted as a rules
584 # to override settings for certain messages.
585 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
586 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
587 # and 'format'.
588 # Shell-like globbing will get expanded.
589 #
590 # SCRIPTING
591 # you can specify a script that gets run when the rule matches by setting
592 # the 'script' option.
593 # The script will be called as follows:
594 # script appname summary body icon urgency
595 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
596 #
597 # NOTE: if you don't want a notification to be displayed, set the format to ""
598 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
599 # fitting options for rules.
600 #[espeak]
601 # summary = "*"
602 # script = dunst_espeak.sh
603 #[script-test]
604 # summary = "*script*"
605 # script = dunst_test.sh
606 #[ignore]
607 ## This notification will not be displayed
608 # summary = "foobar"
609 # format = ""
610 #[signed_on]
611 # appname = Pidgin
612 # summary = "*signed on*"
613 # urgency = low
614 #
615 #[signed_off]
616 # appname = Pidgin
617 # summary = *signed off*
618 # urgency = low
619 #
620 #[says]
621 # appname = Pidgin
622 # summary = *says*
623 # urgency = critical
624 #
625 #[twitter]
626 # appname = Pidgin
627 # summary = *twitter.com*
628 # urgency = normal
629 #
630 [xfpm-backlight]
631 summary = *Brightness*
632 urgency = low
633 #+end_src
634
635 ** Fontconfig
636 :PROPERTIES:
637 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
638 :END:
639
640 #+begin_src xml
641 <?xml version="1.0"?>
642 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
643 <fontconfig>
644 <match target="font">
645 <edit mode="assign" name="rgba">
646 <const>rgb</const>
647 </edit>
648 </match>
649 <match target="font">
650 <edit mode="assign" name="hinting">
651 <bool>true</bool>
652 </edit>
653 </match>
654 <match target="font">
655 <edit mode="assign" name="hintstyle">
656 <const>hintslight</const>
657 </edit>
658 </match>
659 <match target="font">
660 <edit mode="assign" name="antialias">
661 <bool>true</bool>
662 </edit>
663 </match>
664 <match target="font">
665 <edit mode="assign" name="lcdfilter">
666 <const>lcddefault</const>
667 </edit>
668 </match>
669 <dir>~/.fonts</dir>
670
671 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
672 <alias binding="same">
673 <family>Helvetica</family>
674 <prefer>
675 <family>Liberation Sans</family>
676 </prefer>
677 </alias>
678 </fontconfig>
679 #+end_src
680
681 ** getmail
682
683 *** getmailrc
684 :PROPERTIES:
685 :header-args+: :tangle ~/.getmail/getmailrc
686 :END:
687
688 #+begin_src conf
689 [retriever]
690 type = SimplePOP3SSLRetriever
691 server = fencepost.gnu.org
692 username = bandali
693 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
694 port = 995
695 use_apop = True
696
697 [destination]
698 type = Maildir
699 path = ~/mail/gnu/Inbox/
700
701 [options]
702 delete = True
703 #+end_src
704
705 *** getmail.service
706 :PROPERTIES:
707 :header-args+: :tangle ~/.config/systemd/user/getmail.service
708 :END:
709
710 #+begin_src conf :tangle no
711 [Unit]
712 Description=getmail service
713
714 [Service]
715 Type=oneshot
716 ExecStart=/usr/bin/getmail
717 StandardOutput=syslog
718 StandardError=syslog
719 #+end_src
720
721 *** getmail.timer
722 :PROPERTIES:
723 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
724 :END:
725
726 #+begin_src conf :tangle no
727 [Unit]
728 Description=getmail timer
729
730 [Timer]
731 OnCalendar=*:0/30
732 Persistent=true
733 Unit=getmail.service
734
735 [Install]
736 WantedBy=timers.target
737 #+end_src
738
739 ** Git
740
741 *** gitconfig
742 :PROPERTIES:
743 :header-args+: :tangle ~/.gitconfig
744 :END:
745
746 **** user
747 #+begin_src conf
748 [user]
749 name = Amin Bandali
750 email = bandali@gnu.org
751 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
752 #+end_src
753
754 **** signing
755 #+begin_src conf
756 [commit]
757 gpgsign = true
758 # [format]
759 # signoff = true
760 #+end_src
761
762 **** core
763 #+begin_src conf
764 [core]
765 autocrlf = input # CRLF -> LF on commit
766 editor = emacsclient -t
767 excludesfile = ~/.gitignore_global
768 pager = "less"
769 #+end_src
770
771 **** gpg
772 #+begin_src conf
773 [gpg]
774 program = gpg2
775 #+end_src
776
777 **** alias
778 #+begin_src conf
779 [alias]
780 git = !exec git # handle nested git calls, e.g. git git status
781 aliases = config --get-regexp '^alias\\.'
782 a = add
783 s = status
784 sl = status --long
785 c = checkout
786 cb = checkout -b
787 b = branch
788 r = rebase
789 p = pull
790 pr = pull --rebase
791 ps = push
792 psf = push --force
793 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
794 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
795 #+end_src
796
797 **** color
798 #+begin_src conf
799 [color]
800 ui = auto
801 [color "status"]
802 added = green bold
803 changed = red bold
804 untracked = red bold
805 [color "branch"]
806 current = green bold
807 remote = magenta bold
808 [color "diff"]
809 new = green bold
810 old = red bold
811 #+end_src
812
813 **** status
814 #+begin_src conf
815 [status]
816 # showUntrackedFiles = all
817 short=true
818 branch=true
819 #+end_src
820
821 **** github
822 #+begin_src conf
823 [github]
824 user = aminb
825 #+end_src
826
827 **** send-email
828 #+begin_src conf
829 [sendemail]
830 smtpuser = bandali
831 smtpserver = fencepost.gnu.org
832 smtpserverport = 587
833 smtpencryption = tls
834 annotate = yes
835 #+end_src
836
837 *** gitignore
838 :PROPERTIES:
839 :header-args+: :tangle ~/.gitignore_global
840 :END:
841
842 #+begin_src conf
843 *.orig
844 *.py[co]
845 *.sublime-workspace
846 *~
847 .DS_Store
848 *.elc
849 *-autoloads.el
850 #+end_src
851
852 ** GnuPG
853 :PROPERTIES:
854 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
855 :END:
856
857 #+begin_src conf
858 default-cache-ttl 43200
859 max-cache-ttl 43200
860
861 default-cache-ttl-ssh 10800
862 max-cache-ttl-ssh 10800
863
864 # pinentry-program /usr/bin/pinentry-qt
865 #+end_src
866
867 ** GTK
868
869 *** gtk-2.0
870 :PROPERTIES:
871 :header-args+: :tangle ~/.gtkrc-2.0
872 :END:
873
874 #+begin_src conf
875 gtk-theme-name="Greybird"
876 gtk-icon-theme-name="Paper"
877 gtk-font-name="Ubuntu 10"
878 gtk-menu-images=0
879 # gtk-key-theme-name = "Emacs"
880 #+end_src
881
882 *** gtk-3.0
883 :PROPERTIES:
884 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
885 :END:
886
887 #+begin_src conf :tangle no
888 [Settings]
889 gtk-icon-theme-name = Paper
890 # gtk-theme-name = Adwaita
891
892 gtk-theme-name = Greybird
893 # gtk-theme-name = Arc-Darker
894 # gtk-theme-name = Numix-ArchBlue
895
896 gtk-font-name = Ubuntu 10
897 # gtk-key-theme-name = Emacs
898 #+end_src
899
900 ** [[https://github.com/Leinnan/i3gs][i3gs]]
901 :PROPERTIES:
902 :header-args+: :tangle ~/.config/i3gs/config
903 :END:
904
905 #+begin_src conf :comments none :tangle no
906 borders_width=0 0 2 0
907 separator_width=10
908
909 #[mpd]
910 #preset=MPD
911 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
912 #borders_color=#7FDBFF
913
914 [ram]
915 preset=RAM
916 title=<span weight='heavy' fgcolor='#3D9970'> </span>
917 borders_color=#3D9970
918
919 #[cpu]
920 #preset=CPU
921 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
922 #borders_color=#2ECC40
923
924 #[hdd]
925 #preset=HDD
926 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
927 #borders_color=#01FF70
928
929 [volume]
930 command=volume-info
931 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
932 borders_color=#7FDBFF
933
934 [battery]
935 preset=BAT
936 command=battery-percentage-time
937 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
938 borders_color=#39CCCC
939
940 [wifi]
941 preset=WIFI
942 title=<span weight='heavy' fgcolor='#01FF70'> </span>
943 borders_color=#01FF70
944
945 [date]
946 preset=DATE
947 command=date '+%-I:%M, %a %b %d '
948 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
949 borders_color=#FFDC00
950 separator_width=0
951 #+end_src
952
953 ** i3status
954 :PROPERTIES:
955 :header-args+: :tangle ~/.config/i3status/config
956 :END:
957
958 #+begin_src conf :comments none
959 # i3status configuration file.
960 # see "man i3status" for documentation.
961
962 # It is important that this file is edited as UTF-8.
963 # The following line should contain a sharp s:
964 # ß
965 # If the above line is not correctly displayed, fix your editor first!
966
967 general {
968 colors = true
969 interval = 5
970 output_format = "i3bar"
971 }
972
973 # order += "ipv6"
974 order += "disk /"
975 order += "disk /data"
976 order += "wireless _first_"
977 order += "ethernet _first_"
978 order += "battery 0"
979 order += "volume master"
980 order += "load"
981 order += "tztime local"
982
983 wireless _first_ {
984 format_up = "W:%quality %essid %ip"
985 format_down = "W: down"
986 }
987
988 ethernet _first_ {
989 # if you use %speed, i3status requires root privileges
990 format_up = "E: %ip (%speed)"
991 format_down = "E: down"
992 }
993
994 battery 0 {
995 format = "%status %percentage %remaining (%consumption)"
996 path = "/sys/class/power_supply/BAT%d/uevent"
997 low_threshold = "10"
998 threshold_type = "percentage"
999 last_full_capacity = true
1000 integer_battery_capacity = true
1001 hide_seconds = true
1002 }
1003
1004 tztime local {
1005 format = "%-I:%M%P %a %b %d"
1006 }
1007
1008 volume master {
1009 format = "♪ %volume"
1010 format_muted = "🔇 %volume"
1011 device = "pulse"
1012 }
1013
1014 load {
1015 format = "%1min"
1016 }
1017
1018 disk "/" {
1019 format = "/ %avail"
1020 }
1021
1022 disk "/data" {
1023 format = "/data %avail"
1024 }
1025 #+end_src
1026
1027 ** isync
1028
1029 *** mbsyncrc
1030 :PROPERTIES:
1031 :header-args+: :tangle ~/.mbsyncrc
1032 :END:
1033
1034 #+begin_src conf
1035 # Global defaults
1036 CopyArrivalDate yes
1037 Create Both
1038 Expunge Both
1039
1040 ######
1041 IMAPAccount amin
1042 Host mail.aminb.org
1043 User amin@aminb.org
1044 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
1045 SSLType IMAPS
1046
1047 IMAPStore amin-remote
1048 Account amin
1049
1050 IMAPAccount amin-dovecot
1051 Host 127.0.0.1
1052 Port 143
1053 User amin@aminb.org
1054 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
1055 SSLType None
1056
1057 IMAPStore amin-local
1058 Account amin-dovecot
1059
1060 Channel amin
1061 Master :amin-remote:
1062 Slave :amin-local:
1063 Patterns *
1064
1065 ######
1066 IMAPAccount uwaterloo
1067 Host connect.uwaterloo.ca
1068 User abandali
1069 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1070 SSLType IMAPS
1071
1072 IMAPStore uwaterloo-remote
1073 Account uwaterloo
1074
1075 IMAPAccount uwaterloo-dovecot
1076 Host 127.0.0.1
1077 Port 143
1078 User abandali@uwaterloo.ca
1079 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
1080 SSLType None
1081
1082 IMAPStore uwaterloo-local
1083 Account uwaterloo-dovecot
1084
1085 Channel uwaterloo
1086 Master :uwaterloo-remote:
1087 Slave :uwaterloo-local:
1088 Patterns *
1089 #+end_src
1090
1091 *** mbsync.service
1092 :PROPERTIES:
1093 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1094 :END:
1095
1096 #+begin_src conf :tangle no
1097 [Unit]
1098 Description=mbsync service
1099
1100 [Service]
1101 Type=oneshot
1102 ExecStart=/usr/bin/mbsync -Va
1103 StandardOutput=syslog
1104 StandardError=syslog
1105 #+end_src
1106
1107 *** mbsync.timer
1108 :PROPERTIES:
1109 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1110 :END:
1111
1112 #+begin_src conf :tangle no
1113 [Unit]
1114 Description=mbsync timer
1115
1116 [Timer]
1117 OnCalendar=*:0/15
1118 Persistent=true
1119 Unit=mbsync.service
1120
1121 [Install]
1122 WantedBy=timers.target
1123 #+end_src
1124
1125 ** Latexmk
1126 :PROPERTIES:
1127 :header-args+: :tangle ~/.latexmkrc
1128 :END:
1129
1130 #+begin_src conf
1131 $pdf_previewer = "start zathura %O %S";
1132 $clean_ext = "aux out";
1133
1134 # $pdf_update_method = 4;
1135 # $pdf_update_command = "zathura %O %S";
1136
1137 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1138 # by Ctrl+click in the PDF.
1139 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1140 # editor.
1141 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1142 #+end_src
1143
1144 ** libinput
1145
1146 Improve XPS 15 9560's touchpad experience.
1147
1148 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1149 #+begin_src conf :tangle no
1150 Section "InputClass"
1151 Identifier "libinput touchpad catchall"
1152 Driver "libinput"
1153 MatchIsTouchpad "on"
1154 Option "ClickMethod" "clickfinger"
1155 Option "NaturalScrolling" "true"
1156 Option "Tapping" "on"
1157 Option "TappingButtonMap" "lrm"
1158 EndSection
1159 #+end_src
1160
1161 ** mpd
1162 :PROPERTIES:
1163 :header-args+: :tangle ~/.config/mpd/mpd.conf
1164 :END:
1165
1166 #+begin_src conf
1167 # An example configuration file for MPD.
1168 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1169
1170
1171 # Files and directories #######################################################
1172 #
1173 # This setting controls the top directory which MPD will search to discover the
1174 # available audio files and add them to the daemon's online database. This
1175 # setting defaults to the XDG directory, otherwise the music directory will be
1176 # be disabled and audio files will only be accepted over ipc socket (using
1177 # file:// protocol) or streaming files over an accepted protocol.
1178 #
1179 music_directory "~/usr/music"
1180 #
1181 # This setting sets the MPD internal playlist directory. The purpose of this
1182 # directory is storage for playlists created by MPD. The server will use
1183 # playlist files not created by the server but only if they are in the MPD
1184 # format. This setting defaults to playlist saving being disabled.
1185 #
1186 playlist_directory "~/.mpd/playlists"
1187 #
1188 # This setting sets the location of the MPD database. This file is used to
1189 # load the database at server start up and store the database while the
1190 # server is not up. This setting defaults to disabled which will allow
1191 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1192 # files over an accepted protocol.
1193 #
1194 db_file "~/.mpd/database"
1195 #
1196 # These settings are the locations for the daemon log files for the daemon.
1197 # These logs are great for troubleshooting, depending on your log_level
1198 # settings.
1199 #
1200 # The special value "syslog" makes MPD use the local syslog daemon. This
1201 # setting defaults to logging to syslog, otherwise logging is disabled.
1202 #
1203 log_file "~/.mpd/log"
1204 #
1205 # This setting sets the location of the file which stores the process ID
1206 # for use of mpd --kill and some init scripts. This setting is disabled by
1207 # default and the pid file will not be stored.
1208 #
1209 pid_file "~/.mpd/pid"
1210 #
1211 # This setting sets the location of the file which contains information about
1212 # most variables to get MPD back into the same general shape it was in before
1213 # it was brought down. This setting is disabled by default and the server
1214 # state will be reset on server start up.
1215 #
1216 state_file "~/.mpd/state"
1217 #
1218 # The location of the sticker database. This is a database which
1219 # manages dynamic information attached to songs.
1220 #
1221 sticker_file "~/.mpd/sticker.sql"
1222 #
1223 ###############################################################################
1224
1225
1226 # General music daemon options ################################################
1227 #
1228 # This setting specifies the user that MPD will run as. MPD should never run as
1229 # root and you may use this setting to make MPD change its user ID after
1230 # initialization. This setting is disabled by default and MPD is run as the
1231 # current user.
1232 #
1233 #user "nobody"
1234 #
1235 # This setting specifies the group that MPD will run as. If not specified
1236 # primary group of user specified with "user" setting will be used (if set).
1237 # This is useful if MPD needs to be a member of group such as "audio" to
1238 # have permission to use sound card.
1239 #
1240 #group "nogroup"
1241 #
1242 # This setting sets the address for the daemon to listen on. Careful attention
1243 # should be paid if this is assigned to anything other then the default, any.
1244 # This setting can deny access to control of the daemon. Not effective if
1245 # systemd socket activiation is in use.
1246 #
1247 # For network
1248 #bind_to_address "any"
1249 #
1250 # And for Unix Socket
1251 #bind_to_address "~/.mpd/socket"
1252 #
1253 # This setting is the TCP port that is desired for the daemon to get assigned
1254 # to.
1255 #
1256 #port "6600"
1257 #
1258 # This setting controls the type of information which is logged. Available
1259 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1260 # argument is recommended for troubleshooting, though can quickly stretch
1261 # available resources on limited hardware storage.
1262 #
1263 #log_level "default"
1264 #
1265 # If you have a problem with your MP3s ending abruptly it is recommended that
1266 # you set this argument to "no" to attempt to fix the problem. If this solves
1267 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1268 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1269 # point gapless MP3 playback can be enabled.
1270 #
1271 #gapless_mp3_playback "yes"
1272 #
1273 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1274 # of starting playback after startup.
1275 #
1276 #restore_paused "no"
1277 #
1278 # This setting enables MPD to create playlists in a format usable by other
1279 # music players.
1280 #
1281 #save_absolute_paths_in_playlists "no"
1282 #
1283 # This setting defines a list of tag types that will be extracted during the
1284 # audio file discovery process. The complete list of possible values can be
1285 # found in the user manual.
1286 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1287 #
1288 # This setting enables automatic update of MPD's database when files in
1289 # music_directory are changed.
1290 #
1291 #auto_update "yes"
1292 #
1293 # Limit the depth of the directories being watched, 0 means only watch
1294 # the music directory itself. There is no limit by default.
1295 #
1296 #auto_update_depth "3"
1297 #
1298 ###############################################################################
1299
1300
1301 # Symbolic link behavior ######################################################
1302 #
1303 # If this setting is set to "yes", MPD will discover audio files by following
1304 # symbolic links outside of the configured music_directory.
1305 #
1306 #follow_outside_symlinks "yes"
1307 #
1308 # If this setting is set to "yes", MPD will discover audio files by following
1309 # symbolic links inside of the configured music_directory.
1310 #
1311 #follow_inside_symlinks "yes"
1312 #
1313 ###############################################################################
1314
1315
1316 # Zeroconf / Avahi Service Discovery ##########################################
1317 #
1318 # If this setting is set to "yes", service information will be published with
1319 # Zeroconf / Avahi.
1320 #
1321 #zeroconf_enabled "yes"
1322 #
1323 # The argument to this setting will be the Zeroconf / Avahi unique name for
1324 # this MPD server on the network.
1325 #
1326 #zeroconf_name "Music Player"
1327 #
1328 ###############################################################################
1329
1330
1331 # Permissions #################################################################
1332 #
1333 # If this setting is set, MPD will require password authorization. The password
1334 # setting can be specified multiple times for different password profiles.
1335 #
1336 #password "password@read,add,control,admin"
1337 #
1338 # This setting specifies the permissions a user has who has not yet logged in.
1339 #
1340 #default_permissions "read,add,control,admin"
1341 #
1342 ###############################################################################
1343
1344
1345 # Database #######################################################################
1346 #
1347
1348 #database {
1349 # plugin "proxy"
1350 # host "other.mpd.host"
1351 # port "6600"
1352 #}
1353
1354 # Input #######################################################################
1355 #
1356
1357 input {
1358 plugin "curl"
1359 # proxy "proxy.isp.com:8080"
1360 # proxy_user "user"
1361 # proxy_password "password"
1362 }
1363
1364 #
1365 ###############################################################################
1366
1367 # Audio Output ################################################################
1368 #
1369
1370 audio_output {
1371 type "pulse"
1372 name "pulse audio"
1373 }
1374
1375 audio_output {
1376 type "fifo"
1377 name "my_fifo"
1378 path "/tmp/mpd.fifo"
1379 format "44100:16:2"
1380 }
1381
1382 # MPD supports various audio output types, as well as playing through multiple
1383 # audio outputs at the same time, through multiple audio_output settings
1384 # blocks. Setting this block is optional, though the server will only attempt
1385 # autodetection for one sound card.
1386 #
1387 # An example of an ALSA output:
1388 #
1389 #audio_output {
1390 # type "alsa"
1391 # name "My ALSA Device"
1392 ## device "hw:0,0" # optional
1393 ## mixer_type "hardware" # optional
1394 ## mixer_device "default" # optional
1395 ## mixer_control "PCM" # optional
1396 ## mixer_index "0" # optional
1397 #}
1398 #
1399 # An example of an OSS output:
1400 #
1401 #audio_output {
1402 # type "oss"
1403 # name "My OSS Device"
1404 ## device "/dev/dsp" # optional
1405 ## mixer_type "hardware" # optional
1406 ## mixer_device "/dev/mixer" # optional
1407 ## mixer_control "PCM" # optional
1408 #}
1409 #
1410 # An example of a shout output (for streaming to Icecast):
1411 #
1412 #audio_output {
1413 # type "shout"
1414 # encoder "vorbis" # optional
1415 # name "My Shout Stream"
1416 # host "localhost"
1417 # port "8000"
1418 # mount "/mpd.ogg"
1419 # password "hackme"
1420 # quality "5.0"
1421 # bitrate "128"
1422 # format "44100:16:1"
1423 ## protocol "icecast2" # optional
1424 ## user "source" # optional
1425 ## description "My Stream Description" # optional
1426 ## url "http://example.com" # optional
1427 ## genre "jazz" # optional
1428 ## public "no" # optional
1429 ## timeout "2" # optional
1430 ## mixer_type "software" # optional
1431 #}
1432 #
1433 # An example of a recorder output:
1434 #
1435 #audio_output {
1436 # type "recorder"
1437 # name "My recorder"
1438 # encoder "vorbis" # optional, vorbis or lame
1439 # path "/var/lib/mpd/recorder/mpd.ogg"
1440 ## quality "5.0" # do not define if bitrate is defined
1441 # bitrate "128" # do not define if quality is defined
1442 # format "44100:16:1"
1443 #}
1444 #
1445 # An example of a httpd output (built-in HTTP streaming server):
1446 #
1447 #audio_output {
1448 # type "httpd"
1449 # name "My HTTP Stream"
1450 # encoder "vorbis" # optional, vorbis or lame
1451 # port "8000"
1452 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1453 ## quality "5.0" # do not define if bitrate is defined
1454 # bitrate "128" # do not define if quality is defined
1455 # format "44100:16:1"
1456 # max_clients "0" # optional 0=no limit
1457 #}
1458 #
1459 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1460 #
1461 #audio_output {
1462 # type "pulse"
1463 # name "My Pulse Output"
1464 ## server "remote_server" # optional
1465 ## sink "remote_server_sink" # optional
1466 #}
1467 #
1468 # An example of a winmm output (Windows multimedia API).
1469 #
1470 #audio_output {
1471 # type "winmm"
1472 # name "My WinMM output"
1473 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1474 # or
1475 ## device "0" # optional
1476 ## mixer_type "hardware" # optional
1477 #}
1478 #
1479 # An example of an openal output.
1480 #
1481 #audio_output {
1482 # type "openal"
1483 # name "My OpenAL output"
1484 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1485 #}
1486 #
1487 # An example of an sndio output.
1488 #
1489 #audio_output {
1490 # type "sndio"
1491 # name "sndio output"
1492 # mixer_type "software"
1493 #}
1494 #
1495 # An example of an OS X output:
1496 #
1497 #audio_output {
1498 # type "osx"
1499 # name "My OS X Device"
1500 ## device "Built-in Output" # optional
1501 ## channel_map "-1,-1,0,1" # optional
1502 #}
1503 #
1504 ## Example "pipe" output:
1505 #
1506 #audio_output {
1507 # type "pipe"
1508 # name "my pipe"
1509 # command "aplay -f cd 2>/dev/null"
1510 ## Or if you're want to use AudioCompress
1511 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1512 ## Or to send raw PCM stream through PCM:
1513 # command "nc example.org 8765"
1514 # format "44100:16:2"
1515 #}
1516 #
1517 ## An example of a null output (for no audio output):
1518 #
1519 #audio_output {
1520 # type "null"
1521 # name "My Null Output"
1522 # mixer_type "none" # optional
1523 #}
1524 #
1525 ###############################################################################
1526
1527
1528 # Normalization automatic volume adjustments ##################################
1529 #
1530 # This setting specifies the type of ReplayGain to use. This setting can have
1531 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1532 # chooses between "track" and "album" depending on the current state of
1533 # random playback. If random playback is enabled then "track" mode is used.
1534 # See <http://www.replaygain.org> for more details about ReplayGain.
1535 # This setting is off by default.
1536 #
1537 #replaygain "album"
1538 #
1539 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1540 # default this setting is disabled.
1541 #
1542 #replaygain_preamp "0"
1543 #
1544 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1545 # By default this setting is disabled.
1546 #
1547 #replaygain_missing_preamp "0"
1548 #
1549 # This setting enables or disables ReplayGain limiting.
1550 # MPD calculates actual amplification based on the ReplayGain tags
1551 # and replaygain_preamp / replaygain_missing_preamp setting.
1552 # If replaygain_limit is enabled MPD will never amplify audio signal
1553 # above its original level. If replaygain_limit is disabled such amplification
1554 # might occur. By default this setting is enabled.
1555 #
1556 #replaygain_limit "yes"
1557 #
1558 # This setting enables on-the-fly normalization volume adjustment. This will
1559 # result in the volume of all playing audio to be adjusted so the output has
1560 # equal "loudness". This setting is disabled by default.
1561 #
1562 #volume_normalization "no"
1563 #
1564 ###############################################################################
1565
1566 # Character Encoding ##########################################################
1567 #
1568 # If file or directory names do not display correctly for your locale then you
1569 # may need to modify this setting.
1570 #
1571 #filesystem_charset "UTF-8"
1572 #
1573 ###############################################################################
1574 #+end_src
1575
1576 ** msmtp
1577 :PROPERTIES:
1578 :header-args+: :tangle ~/.msmtprc
1579 :END:
1580
1581 #+begin_src conf
1582 # Set default values for all following accounts.
1583 defaults
1584 port 587
1585 tls on
1586 auth on
1587 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1588 logfile ~/.msmtp.log
1589
1590 # aminb
1591 account aminb
1592 host mail.aminb.org
1593 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1594 tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
1595 tls_starttls on
1596 from amin@aminb.org
1597 user amin@aminb.org
1598 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1599
1600 # gnu
1601 account gnu
1602 host fencepost.gnu.org
1603 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1604 tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3
1605 tls_starttls on
1606 from bandali@gnu.org
1607 user bandali
1608 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1609
1610 # gnu (old)
1611 account gnu-aminb : gnu
1612 from aminb@gnu.org
1613 account gnu-amin : gnu
1614 from amin@gnu.org
1615 account gnu-mab : gnu
1616 from mab@gnu.org
1617
1618 # uwaterloo
1619 account uwaterloo
1620 host connect.uwaterloo.ca
1621 tls_starttls on
1622 from abandali@uwaterloo.ca
1623 user abandali
1624 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1625 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1626
1627 # Set a default account
1628 account default : aminb
1629 #+end_src
1630
1631 ** ncmpcpp
1632
1633 *** config
1634 :PROPERTIES:
1635 :header-args+: :tangle ~/.ncmpcpp/config
1636 :END:
1637
1638 #+begin_src conf :tangle no
1639 ##############################################################
1640 ## This is the example configuration file. Copy it to ##
1641 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1642 ## and set up your preferences. ##
1643 ##############################################################
1644 #
1645 ##### directories ######
1646 ##
1647 ## Directory for storing ncmpcpp related files.
1648 ## Changing it is useful if you want to store
1649 ## everything somewhere else and provide command
1650 ## line setting for alternative location to config
1651 ## file which defines that while launching ncmpcpp.
1652 ##
1653 #
1654 ncmpcpp_directory = ~/.ncmpcpp
1655 #
1656 ##
1657 ## Directory for storing downloaded lyrics. It
1658 ## defaults to ~/.lyrics since other MPD clients
1659 ## (eg. ncmpc) also use that location.
1660 ##
1661 #
1662 #lyrics_directory = ~/.lyrics
1663 #
1664 ##### connection settings #####
1665 #
1666 #mpd_host = localhost
1667 #
1668 #mpd_port = 6600
1669 #
1670 #mpd_connection_timeout = 5
1671 #
1672 ## Needed for tag editor and file operations to work.
1673 ##
1674 mpd_music_dir = ~/usr/music
1675 #
1676 #mpd_crossfade_time = 5
1677 #
1678 ##### music visualizer #####
1679 ##
1680 ## Note: In order to make music visualizer work you'll
1681 ## need to use mpd fifo output, whose format parameter
1682 ## has to be set to 44100:16:1 for mono visualization
1683 ## or 44100:16:2 for stereo visualization. Example
1684 ## configuration (it has to be put into mpd.conf):
1685 ##
1686 ## audio_output {
1687 ## type "fifo"
1688 ## name "Visualizer feed"
1689 ## path "/tmp/mpd.fifo"
1690 ## format "44100:16:2"
1691 ## }
1692 ##
1693 #
1694 visualizer_fifo_path = /tmp/mpd.fifo
1695 #
1696 ##
1697 ## Note: Below parameter is needed for ncmpcpp
1698 ## to determine which output provides data for
1699 ## visualizer and thus allow syncing between
1700 ## visualization and sound as currently there
1701 ## are some problems with it.
1702 ##
1703 #
1704 visualizer_output_name = my fifo
1705 #
1706 ##
1707 ## If you set format to 44100:16:2, make it 'yes'.
1708 ##
1709 visualizer_in_stereo = yes
1710 #
1711 ##
1712 ## Multiply received samples by given value. Very
1713 ## useful for proper visualization of quiet music.
1714 ##
1715 #visualizer_sample_multiplier = 1
1716 #
1717 ##
1718 ## Note: Below parameter defines how often ncmpcpp
1719 ## has to "synchronize" visualizer and audio outputs.
1720 ## 30 seconds is optimal value, but if you experience
1721 ## synchronization problems, set it to lower value.
1722 ## Keep in mind that sane values start with >=10.
1723 ##
1724 #
1725 visualizer_sync_interval = 30
1726 #
1727 ##
1728 ## Note: To enable spectrum frequency visualization
1729 ## you need to compile ncmpcpp with fftw3 support.
1730 ##
1731 #
1732 ## Available values: spectrum, wave, wave_filled, ellipse.
1733 ##
1734 visualizer_type = spectrum
1735 #
1736 #visualizer_look = ●▮
1737 visualizer_look = "●•"
1738 #
1739 #visualizer_color = blue, cyan, green, yellow, magenta, red
1740 #
1741 ## Alternative subset of 256 colors for terminals that support it.
1742 ##
1743 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1744 #
1745 ##### system encoding #####
1746 ##
1747 ## ncmpcpp should detect your charset encoding
1748 ## but if it failed to do so, you can specify
1749 ## charset encoding you are using here.
1750 ##
1751 ## Note: You can see whether your ncmpcpp build
1752 ## supports charset detection by checking output
1753 ## of `ncmpcpp --version`.
1754 ##
1755 ## Note: Since MPD uses UTF-8 by default, setting
1756 ## this option makes sense only if your encoding
1757 ## is different.
1758 ##
1759 #
1760 #system_encoding = ""
1761 #
1762 ##### delays #####
1763 #
1764 ## Time of inactivity (in seconds) after playlist
1765 ## highlighting will be disabled (0 = always on).
1766 ##
1767 #playlist_disable_highlight_delay = 5
1768 #
1769 ## Defines how long messages are supposed to be visible.
1770 ##
1771 #message_delay_time = 5
1772 #
1773 ##### song format #####
1774 ##
1775 ## For a song format you can use:
1776 ##
1777 ## %l - length
1778 ## %f - filename
1779 ## %D - directory
1780 ## %a - artist
1781 ## %A - album artist
1782 ## %t - title
1783 ## %b - album
1784 ## %y - date
1785 ## %n - track number (01/12 -> 01)
1786 ## %N - full track info (01/12 -> 01/12)
1787 ## %g - genre
1788 ## %c - composer
1789 ## %p - performer
1790 ## %d - disc
1791 ## %C - comment
1792 ## %P - priority
1793 ## $R - begin right alignment
1794 ##
1795 ## If you want to make sure that a part of the format is displayed
1796 ## only when certain tags are present, you can archieve it by
1797 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1798 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1799 ## It is also possible to define a list of alternatives by providing
1800 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1801 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1802 ## present.
1803 ##
1804 ## Note: If you want to set limit on maximal length of a tag, just
1805 ## put the appropriate number between % and character that defines
1806 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1807 ##
1808 ## In addition, formats support markers used for text attributes.
1809 ## They are followed by character '$'. After that you can put:
1810 ##
1811 ## - 0 - default window color (discards all other colors)
1812 ## - 1 - black
1813 ## - 2 - red
1814 ## - 3 - green
1815 ## - 4 - yellow
1816 ## - 5 - blue
1817 ## - 6 - magenta
1818 ## - 7 - cyan
1819 ## - 8 - white
1820 ## - 9 - end of current color
1821 ## - b - bold text
1822 ## - u - underline text
1823 ## - r - reverse colors
1824 ## - a - use alternative character set
1825 ##
1826 ## If you don't want to use a non-color attribute anymore, just put it
1827 ## again, but this time insert character '/' between '$' and attribute
1828 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1829 ## or filename with reversed colors.
1830 ##
1831 ## If you want to use 256 colors and/or background colors in formats
1832 ## (the naming scheme is described below in section about color
1833 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1834 ## the artist tag to one of the non-standard colors and make it have
1835 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1836 ## that for standard colors this is interchangable with attributes
1837 ## listed above.
1838 ##
1839 ## Note: colors can be nested.
1840 ##
1841 #
1842 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1843 #
1844 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1845 #
1846 #song_library_format = {%n - }{%t}|{%f}
1847 #
1848 #
1849 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1850 #
1851 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1852 #
1853 #now_playing_prefix = $b
1854 #
1855 #now_playing_suffix = $/b
1856 #
1857 #browser_playlist_prefix = "$2playlist$9 "
1858 #
1859 #selected_item_prefix = $6
1860 #
1861 #selected_item_suffix = $9
1862 #
1863 #modified_item_prefix = $3> $9
1864 #
1865 ##
1866 ## Note: attributes are not supported for the following variables.
1867 ##
1868 #song_window_title_format = {%a - }{%t}|{%f}
1869 ##
1870 ## Note: Below variables are used for sorting songs in browser.
1871 ## The sort mode determines how songs are sorted, and can be used
1872 ## in combination with a sort format to specify a custom sorting format.
1873 ## Available values for browser_sort_mode are "name", "mtime", "format"
1874 ## and "noop".
1875 ##
1876 #
1877 #browser_sort_mode = name
1878 #
1879 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1880 #
1881 ##### columns settings #####
1882 ##
1883 ## syntax of song columns list format is "column column etc."
1884 ##
1885 ## - syntax for each column is:
1886 ##
1887 ## (width of the column)[color of the column]{displayed tag}
1888 ##
1889 ## Note: Width is by default in %, if you want a column to
1890 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1891 ## will be the column that take 10% of screen (so the real width
1892 ## will depend on actual screen size), whereas (10f)[white]{a}
1893 ## will take 10 terminal cells, no matter how wide the screen is.
1894 ##
1895 ## - color is optional (if you want the default one,
1896 ## leave the field empty).
1897 ##
1898 ## Note: You can give a column additional attributes by putting appropriate
1899 ## character after displayed tag character. Available attributes are:
1900 ##
1901 ## - r - column will be right aligned
1902 ## - E - if tag is empty, empty tag marker won't be displayed
1903 ##
1904 ## You can also:
1905 ##
1906 ## - give a column custom name by putting it after attributes,
1907 ## separated with character ':', e.g. {lr:Length} gives you
1908 ## right aligned column of lengths named "Length".
1909 ##
1910 ## - define sequence of tags, that have to be displayed in case
1911 ## predecessor is empty in a way similar to the one in classic
1912 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1913 ## creates column named "Owner" that tries to display artist
1914 ## tag and then composer and performer if previous ones are
1915 ## not available.
1916 ##
1917 #
1918 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1919 #
1920 ##### various settings #####
1921 #
1922 ##
1923 ## Note: Custom command that will be executed each
1924 ## time song changes. Useful for notifications etc.
1925 ##
1926 #execute_on_song_change = ""
1927 #
1928 #playlist_show_mpd_host = no
1929 #
1930 #playlist_show_remaining_time = no
1931 #
1932 #playlist_shorten_total_times = no
1933 #
1934 #playlist_separate_albums = no
1935 #
1936 ##
1937 ## Note: Possible display modes: classic, columns.
1938 ##
1939 #playlist_display_mode = columns
1940 #
1941 #browser_display_mode = classic
1942 #
1943 #search_engine_display_mode = classic
1944 #
1945 #playlist_editor_display_mode = classic
1946 #
1947 #discard_colors_if_item_is_selected = yes
1948 #
1949 #incremental_seeking = yes
1950 #
1951 #seek_time = 1
1952 #
1953 #volume_change_step = 2
1954 #
1955 #autocenter_mode = no
1956 #
1957 #centered_cursor = no
1958 #
1959 ##
1960 ## Note: You can specify third character which will
1961 ## be used to build 'empty' part of progressbar.
1962 ##
1963 #progressbar_look = =>
1964 progressbar_look = "─╼╶"
1965 #progressbar_look = "─⊙╶"
1966 #
1967 #progressbar_boldness = yes
1968 #
1969 ## Available values: database, playlist.
1970 ##
1971 #default_place_to_search_in = database
1972 #
1973 ## Available values: classic, alternative.
1974 ##
1975 #user_interface = classic
1976 #
1977 #data_fetching_delay = yes
1978 #
1979 ## Available values: artist, album_artist, date, genre, composer, performer.
1980 ##
1981 #media_library_primary_tag = artist
1982 #
1983 ## Available values: wrapped, normal.
1984 ##
1985 #default_find_mode = wrapped
1986 #
1987 #default_tag_editor_pattern = %n - %t
1988 #
1989 #header_visibility = yes
1990 #
1991 #statusbar_visibility = yes
1992 #
1993 #titles_visibility = yes
1994 #
1995 #header_text_scrolling = yes
1996 #
1997 #cyclic_scrolling = no
1998 #
1999 #lines_scrolled = 2
2000 #
2001 #follow_now_playing_lyrics = no
2002 #
2003 #fetch_lyrics_for_current_song_in_background = no
2004 #
2005 #store_lyrics_in_song_dir = no
2006 #
2007 #generate_win32_compatible_filenames = yes
2008 #
2009 #allow_for_physical_item_deletion = no
2010 #
2011 ##
2012 ## Note: If you set this variable, ncmpcpp will try to
2013 ## get info from last.fm in language you set and if it
2014 ## fails, it will fall back to english. Otherwise it will
2015 ## use english the first time.
2016 ##
2017 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
2018 ##
2019 #lastfm_preferred_language = en
2020 #
2021 #show_hidden_files_in_local_browser = no
2022 #
2023 ##
2024 ## How shall screen switcher work?
2025 ##
2026 ## - "previous" - switch between the current and previous screen.
2027 ## - "screen1,...,screenN" - switch between given sequence of screens.
2028 ##
2029 ## Screens available for use: help, playlist, browser, search_engine,
2030 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
2031 ##
2032 #screen_switcher_mode = playlist, browser
2033 #
2034 ##
2035 ## Note: You can define startup screen
2036 ## by choosing screen from the list above.
2037 ##
2038 #startup_screen = playlist
2039 #
2040 ##
2041 ## Note: You can define startup slave screen
2042 ## by choosing screen from the list above or
2043 ## an empty value for no slave screen.
2044 ##
2045 #startup_slave_screen = ""
2046 #
2047 #startup_slave_screen_focus = no
2048 #
2049 ##
2050 ## Default width of locked screen (in %).
2051 ## Acceptable values are from 20 to 80.
2052 ##
2053 #
2054 #locked_screen_width_part = 50
2055 #
2056 #ask_for_locked_screen_width_part = yes
2057 #
2058 #jump_to_now_playing_song_at_start = yes
2059 #
2060 #ask_before_clearing_playlists = yes
2061 #
2062 #clock_display_seconds = no
2063 #
2064 #display_volume_level = yes
2065 #
2066 #display_bitrate = no
2067 #
2068 #display_remaining_time = no
2069 #
2070 ## Available values: none, basic, extended, perl.
2071 ##
2072 #regular_expressions = perl
2073 #
2074 ##
2075 ## Note: If below is enabled, ncmpcpp will ignore leading
2076 ## "The" word while sorting items in browser, tags in
2077 ## media library, etc.
2078 ##
2079 #ignore_leading_the = no
2080 #
2081 #block_search_constraints_change_if_items_found = yes
2082 #
2083 #mouse_support = yes
2084 #
2085 #mouse_list_scroll_whole_page = yes
2086 #
2087 #empty_tag_marker = <empty>
2088 #
2089 #tags_separator = " | "
2090 #
2091 #tag_editor_extended_numeration = no
2092 #
2093 #media_library_sort_by_mtime = no
2094 #
2095 #enable_window_title = yes
2096 #
2097 ##
2098 ## Note: You can choose default search mode for search
2099 ## engine. Available modes are:
2100 ##
2101 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2102 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2103 ## but if your mpd is on a remote machine, downloading big database
2104 ## to process it can take a while
2105 ## - 3 - match only exact values (this mode uses mpd function for searching
2106 ## in database and local one for searching in current playlist)
2107 ##
2108 #
2109 #search_engine_default_search_mode = 1
2110 #
2111 #external_editor = nano
2112 #
2113 ## Note: set to yes if external editor is a console application.
2114 ##
2115 #use_console_editor = yes
2116 #
2117 ##### colors definitions #####
2118 ##
2119 ## It is possible to set a background color by setting a color
2120 ## value "<foreground>_<background>", e.g. red_black will set
2121 ## foregound color to red and background color to black.
2122 ##
2123 ## In addition, for terminals that support 256 colors it
2124 ## is possible to set one of them by using a number in range
2125 ## [1, 256] instead of color name, e.g. numerical value
2126 ## corresponding to red_black is 2_1. To find out if the
2127 ## terminal supports 256 colors, run ncmpcpp and check out
2128 ## the bottom of the help screen for list of available colors
2129 ## and their numerical values.
2130 ##
2131 ## Note: due to technical limitations of ncurses, if 256 colors
2132 ## are used, it is possible to either use only the colors with
2133 ## default background color, or all pairs from 1_1 up to 254_127,
2134 ## depending on the ncurses version used.
2135 ##
2136 #
2137 #colors_enabled = yes
2138 #
2139 #empty_tag_color = cyan
2140 #
2141 #header_window_color = default
2142 #
2143 #volume_color = default
2144 #
2145 #state_line_color = default
2146 #
2147 #state_flags_color = default
2148 #
2149 #main_window_color = yellow
2150 #
2151 #color1 = white
2152 #
2153 #color2 = green
2154 #
2155 #main_window_highlight_color = yellow
2156 #
2157 #progressbar_color = black
2158 #
2159 #progressbar_elapsed_color = green
2160 #
2161 #statusbar_color = default
2162 #
2163 #alternative_ui_separator_color = black
2164 #
2165 #active_column_color = red
2166 #
2167 #window_border_color = green
2168 #
2169 #active_window_border = red
2170 #
2171 #+end_src
2172
2173 *** bindings
2174 :PROPERTIES:
2175 :header-args+: :tangle ~/.ncmpcpp/bindings
2176 :END:
2177
2178 #+begin_src conf :tangle no
2179 def_key "j"
2180 scroll_down
2181 def_key "k"
2182 scroll_up
2183
2184 def_key "ctrl-u"
2185 page_up
2186 def_key "ctrl-d"
2187 page_down
2188
2189 def_key "h"
2190 previous_column
2191 def_key "l"
2192 next_column
2193
2194 def_key "."
2195 show_lyrics
2196
2197 def_key "n"
2198 next_found_item
2199 def_key "N"
2200 previous_found_item
2201
2202 def_key "J"
2203 move_sort_order_down
2204 def_key "K"
2205 move_sort_order_up
2206 #+end_src
2207
2208 ** notmuch
2209
2210 *** notmuch-config
2211 :PROPERTIES:
2212 :header-args+: :tangle ~/.notmuch-config
2213 :END:
2214
2215 #+begin_src conf
2216 # .notmuch-config - Configuration file for the notmuch mail system
2217 #
2218 # For more information about notmuch, see https://notmuchmail.org
2219
2220 # Database configuration
2221 #
2222 # The only value supported here is 'path' which should be the top-level
2223 # directory where your mail currently exists and to where mail will be
2224 # delivered in the future. Files should be individual email messages.
2225 # Notmuch will store its database within a sub-directory of the path
2226 # configured here named ".notmuch".
2227 #
2228 [database]
2229 path=/home/amin/oldmail
2230
2231 # User configuration
2232 #
2233 # Here is where you can let notmuch know how you would like to be
2234 # addressed. Valid settings are
2235 #
2236 # name Your full name.
2237 # primary_email Your primary email address.
2238 # other_email A list (separated by ';') of other email addresses
2239 # at which you receive email.
2240 #
2241 # Notmuch will use the various email addresses configured here when
2242 # formatting replies. It will avoid including your own addresses in the
2243 # recipient list of replies, and will set the From address based on the
2244 # address to which the original email was addressed.
2245 #
2246 [user]
2247 name=Amin Bandali
2248 primary_email=amin@aminb.org
2249 other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2250
2251 # Configuration for "notmuch new"
2252 #
2253 # The following options are supported here:
2254 #
2255 # tags A list (separated by ';') of the tags that will be
2256 # added to all messages incorporated by "notmuch new".
2257 #
2258 # ignore A list (separated by ';') of file and directory names
2259 # that will not be searched for messages by "notmuch new".
2260 #
2261 # NOTE: *Every* file/directory that goes by one of those
2262 # names will be ignored, independent of its depth/location
2263 # in the mail store.
2264 #
2265 [new]
2266 tags=new;
2267 #tags=unread;inbox;
2268 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2269
2270 # Search configuration
2271 #
2272 # The following option is supported here:
2273 #
2274 # exclude_tags
2275 # A ;-separated list of tags that will be excluded from
2276 # search results by default. Using an excluded tag in a
2277 # query will override that exclusion.
2278 #
2279 [search]
2280 exclude_tags=deleted;spam;
2281
2282 # Maildir compatibility configuration
2283 #
2284 # The following option is supported here:
2285 #
2286 # synchronize_flags Valid values are true and false.
2287 #
2288 # If true, then the following maildir flags (in message filenames)
2289 # will be synchronized with the corresponding notmuch tags:
2290 #
2291 # Flag Tag
2292 # ---- -------
2293 # D draft
2294 # F flagged
2295 # P passed
2296 # R replied
2297 # S unread (added when 'S' flag is not present)
2298 #
2299 # The "notmuch new" command will notice flag changes in filenames
2300 # and update tags, while the "notmuch tag" and "notmuch restore"
2301 # commands will notice tag changes and update flags in filenames
2302 #
2303 [maildir]
2304 synchronize_flags=true
2305
2306 # Cryptography related configuration
2307 #
2308 # The following option is supported here:
2309 #
2310 # gpg_path
2311 # binary name or full path to invoke gpg.
2312 #
2313 [crypto]
2314 gpg_path=gpg
2315 #+end_src
2316
2317 *** pre-new hook
2318 :PROPERTIES:
2319 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2320 :END:
2321
2322 #+begin_src sh
2323 touch /tmp/gnusieve.log
2324 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2325 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2326 #+end_src
2327
2328 *** post-new hook
2329 :PROPERTIES:
2330 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2331 :END:
2332
2333 #+begin_src sh
2334 # apply sent tag to messages sent by me
2335 notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2336
2337 # initial tagging
2338 notmuch tag -latest -- tag:latest
2339 notmuch tag +inbox +unread +latest -new -- tag:new
2340
2341
2342 # apply tags to lists
2343
2344 # <aminb>
2345 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2346 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2347
2348 notmuch tag -inbox +pay -- folder:amin/pay
2349 notmuch tag -inbox +banking -- folder:amin/banking
2350 notmuch tag -inbox +work -- folder:amin/work
2351 # </aminb>
2352
2353 # <uw>
2354 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2355 notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2356 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2357 notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2358 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2359
2360 notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
2361 notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2362 notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2363 notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2364 notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2365 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2366 # </uw>
2367
2368 # <gnu>
2369 notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2370 notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2371 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2372 notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2373 notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2374 notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2375 notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2376 notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2377 notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2378 notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2379 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2380
2381 notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2382 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2383 notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2384 notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2385
2386 notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2387 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2388 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2389 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2390 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2391 # </gnu>
2392
2393 notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2394 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2395 #+end_src
2396
2397 *** notmuch.service
2398 :PROPERTIES:
2399 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2400 :END:
2401
2402 #+begin_src conf :tangle no
2403 [Unit]
2404 Description=notmuch service
2405
2406 [Service]
2407 Type=oneshot
2408 ExecStart=/usr/bin/notmuch new
2409 StandardOutput=syslog
2410 StandardError=syslog
2411 #+end_src
2412
2413 *** notmuch.timer
2414 :PROPERTIES:
2415 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2416 :END:
2417
2418 #+begin_src conf :tangle no
2419 [Unit]
2420 Description=notmuch timer
2421
2422 [Timer]
2423 OnCalendar=*:0/5
2424 Persistent=true
2425 Unit=notmuch.service
2426
2427 [Install]
2428 WantedBy=timers.target
2429 #+end_src
2430
2431 ** offlineimap
2432
2433 *** offlineimaprc
2434 :PROPERTIES:
2435 :header-args+: :tangle ~/.offlineimaprc
2436 :END:
2437
2438 #+begin_src conf :tangle no
2439 [general]
2440 pythonfile = ~/.offlineimap.py
2441 accounts = Gmail, aminb
2442 maxsyncaccounts = 3
2443
2444 [Account Gmail]
2445 localrepository = GmailL
2446 remoterepository = GmailR
2447
2448 [Account aminb]
2449 localrepository = aminbL
2450 remoterepository = aminbR
2451
2452 [Repository GmailL]
2453 type = Maildir
2454 localfolders = ~/Maildir/Gmail
2455
2456 [Repository GmailR]
2457 type = IMAP
2458 remotehost = imap.gmail.com
2459 remoteusereval = mailuser("gmail")
2460 remotepasseval = mailpasswd("gmail")
2461 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2462 ssl = yes
2463 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2464 maxconnections = 1
2465 realdelete = no
2466
2467 [Repository aminbL]
2468 type = Maildir
2469 localfolders = ~/Maildir/aminb
2470
2471 [Repository aminbR]
2472 type = IMAP
2473 remotehost = mail.aminb.org
2474 remoteusereval = mailuser("aminb")
2475 remotepasseval = mailpasswd("aminb")
2476 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2477 ssl = yes
2478 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2479 maxconnections = 1
2480 realdelete = no
2481 #+end_src
2482
2483 *** offlineimap.py
2484 :PROPERTIES:
2485 :header-args+: :tangle ~/.offlineimap.py
2486 :END:
2487
2488 #+begin_src python :tangle no
2489 import os
2490 import subprocess
2491
2492 def mailpasswd(acct):
2493 acct = os.path.basename(acct)
2494 path = "/home/amin/.passwd/%s.gpg" % acct
2495 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2496 try:
2497 return subprocess.check_output(args).strip()
2498 except subprocess.CalledProcessError:
2499 return ""
2500
2501 def mailuser(acct):
2502 acct = os.path.basename(acct)
2503 path = "/home/amin/.passwd/%s" % acct
2504 args = ["cat", path]
2505 try:
2506 return subprocess.check_output(args).strip()
2507 except subprocess.CalledProcessError:
2508 return ""
2509
2510 def prime_gpg_agent():
2511 ret = False
2512 i = 1
2513 while not ret:
2514 ret = (mailpasswd("prime") == "prime")
2515 if i > 2:
2516 from offlineimap.ui import getglobalui
2517 sys.stderr.write("Error reading in passwords. Terminating.\n")
2518 getglobalui().terminate()
2519 i += 1
2520 return ret
2521
2522 prime_gpg_agent()
2523 #+end_src
2524
2525 ** pigeonhole
2526 *** amin.sieve
2527 :PROPERTIES:
2528 :header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none
2529 :END:
2530
2531 #+begin_src conf
2532 require ["regex", "variables", "fileinto", "envelope",
2533 "mailbox", "imap4flags", "include"];
2534
2535 # webmasters
2536 if anyof (
2537 address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
2538 fileinto :create "gnu.webmasters";
2539 stop;
2540 }
2541
2542 include :personal "lists";
2543 #+end_src
2544
2545 *** lists.sieve
2546 :PROPERTIES:
2547 :header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none
2548 :END:
2549
2550 #+begin_src conf
2551 require ["regex", "variables", "fileinto", "envelope",
2552 "mailbox", "imap4flags", "include"];
2553
2554 # mailing lists
2555 if anyof (
2556 header :contains "list-id"
2557 [ "<emacs-devel.gnu.org>"
2558 , "<emacs-orgmode.gnu.org>"
2559 , "<emacsconf-discuss.gnu.org>"
2560 , "<fencepost-users.gnu.org>"
2561 , "<guix-devel.gnu.org>"
2562 , "<guile-devel.gnu.org>"
2563 , "<help-gnu-emacs.gnu.org>"
2564 , "<info-gnu-emacs.gnu.org>"
2565 , "<info-guix.gnu.org>"
2566 , "<www-commits.gnu.org>"
2567 , "<www-discuss.gnu.org>"
2568 , "<deepspec.lists.cs.princeton.edu>"
2569 , "<haskell-cafe.haskell.org>"
2570 , "<haskell-art.we.lurk.org>"
2571 , "<notmuch.notmuchmail.org>"
2572 ] ) {
2573 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2574 set :lower "listname" "${1}";
2575 fileinto :create "gnu.${listname}";
2576 stop;
2577 }
2578 }
2579
2580 # sr.ht lists, with dots ('.') omitted
2581 if anyof (
2582 header :contains "list-id"
2583 [ "<~bandali/public-inbox@lists.sr.ht>"
2584 , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
2585 , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
2586 , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
2587 , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
2588 ] ) {
2589 if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
2590 set :lower "username" "${1}";
2591 set :lower "listname" "${2}${3}${4}${5}${6}${7}";
2592 fileinto :create "gnu.${username}.${listname}";
2593 stop;
2594 }
2595 }
2596 #+end_src
2597
2598 ** polybar
2599
2600 *** config
2601 :PROPERTIES:
2602 :header-args+: :tangle ~/.config/polybar/config
2603 :END:
2604
2605 #+begin_src conf :tangle no
2606 ;=====================================================
2607 ;
2608 ; To learn more about how to configure Polybar
2609 ; go to https://github.com/jaagr/polybar
2610 ;
2611 ; The README contains alot of information
2612 ;
2613 ;=====================================================
2614
2615 [colors]
2616 ;background = ${xrdb:color0:#222}
2617 background = #222
2618 background-alt = #444
2619 ;foreground = ${xrdb:color7:#222}
2620 foreground = #eee
2621 foreground-alt = #888
2622 primary = #ffb52a
2623 secondary = #e60053
2624 alert = #bd2c40
2625
2626 [bar/main]
2627 ;monitor = ${env:MONITOR:HDMI-1}
2628 width = 100%
2629 height = 27
2630 ;offset-x = 1%
2631 ;offset-y = 1%
2632 radius = 3.0
2633 fixed-center = true
2634
2635 background = ${colors.background}
2636 foreground = ${colors.foreground}
2637
2638 line-size = 3
2639 line-color = #f00
2640
2641 border-size = 4
2642 border-color = #00000000
2643
2644 padding-left = 0
2645 padding-right = 2
2646
2647 module-margin-left = 2
2648 module-margin-right = 2
2649
2650 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2651 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2652 font-2 = Wuncon Siji:pixelsize=10;1
2653 font-3 = FontAwesome:pixelsize=10;1
2654
2655 modules-left = bspwm xwindow
2656 modules-center =
2657 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2658
2659 tray-position = right
2660 tray-padding = 1
2661 ;tray-transparent = true
2662 ;tray-background = #0063ff
2663 tray-maxsize = 18
2664
2665 wm-restack = bspwm
2666
2667 ;override-redirect = true
2668
2669 scroll-up = bspwm-desknext
2670 scroll-down = bspwm-deskprev
2671
2672 [module/xwindow]
2673 type = internal/xwindow
2674 label = %title:0:50:...%
2675
2676 [module/xkeyboard]
2677 type = internal/xkeyboard
2678 blacklist-0 = num lock
2679
2680 format-prefix = " "
2681 format-prefix-foreground = ${colors.foreground-alt}
2682 format-prefix-underline = ${colors.secondary}
2683
2684 label-layout = %layout%
2685 label-layout-underline = ${colors.secondary}
2686
2687 label-indicator-padding = 2
2688 label-indicator-margin = 1
2689 label-indicator-background = ${colors.secondary}
2690 label-indicator-underline = ${colors.secondary}
2691
2692 [module/filesystem]
2693 type = internal/fs
2694 interval = 25
2695
2696 mount-0 = /
2697
2698 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2699 label-unmounted = %mountpoint% not mounted
2700 label-unmounted-foreground = ${colors.foreground-alt}
2701
2702 [module/bspwm]
2703 type = internal/bspwm
2704
2705 label-focused = %index%
2706 label-focused-background = ${colors.background-alt}
2707 label-focused-underline= ${colors.primary}
2708 label-focused-padding = 2
2709
2710 label-occupied = %index%
2711 label-occupied-padding = 2
2712
2713 label-urgent = %index%!
2714 label-urgent-background = ${colors.alert}
2715 label-urgent-padding = 2
2716
2717 label-empty = %index%
2718 label-empty-foreground = ${colors.foreground-alt}
2719 label-empty-padding = 2
2720
2721 [module/i3]
2722 type = internal/i3
2723 format = <label-state> <label-mode>
2724 index-sort = true
2725 wrapping-scroll = false
2726
2727 ; Only show workspaces on the same output as the bar
2728 ;pin-workspaces = true
2729
2730 label-mode-padding = 2
2731 label-mode-foreground = #000
2732 label-mode-background = ${colors.primary}
2733
2734 ; focused = Active workspace on focused monitor
2735 label-focused = %index%
2736 label-focused-background = ${module/bspwm.label-focused-background}
2737 label-focused-underline = ${module/bspwm.label-focused-underline}
2738 label-focused-padding = ${module/bspwm.label-focused-padding}
2739
2740 ; unfocused = Inactive workspace on any monitor
2741 label-unfocused = %index%
2742 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2743
2744 ; visible = Active workspace on unfocused monitor
2745 label-visible = %index%
2746 label-visible-background = ${self.label-focused-background}
2747 label-visible-underline = ${self.label-focused-underline}
2748 label-visible-padding = ${self.label-focused-padding}
2749
2750 ; urgent = Workspace with urgency hint set
2751 label-urgent = %index%
2752 label-urgent-background = ${module/bspwm.label-urgent-background}
2753 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2754
2755 [module/mpd]
2756 type = internal/mpd
2757 format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2758
2759 icon-prev = 
2760 icon-stop = 
2761 icon-play = 
2762 icon-pause = 
2763 icon-next = 
2764
2765 label-song-maxlen = 25
2766 label-song-ellipsis = true
2767
2768 [module/xbacklight]
2769 type = internal/xbacklight
2770
2771 format = <label> <bar>
2772 label = BL
2773
2774 bar-width = 10
2775 bar-indicator = |
2776 bar-indicator-foreground = #ff
2777 bar-indicator-font = 2
2778 bar-fill = ─
2779 bar-fill-font = 2
2780 bar-fill-foreground = #9f78e1
2781 bar-empty = ─
2782 bar-empty-font = 2
2783 bar-empty-foreground = ${colors.foreground-alt}
2784
2785 [module/backlight-acpi]
2786 inherit = module/xbacklight
2787 type = internal/backlight
2788 ;card = intel_backlight
2789 card = mba6x_backlight
2790
2791 [module/cpu]
2792 type = internal/cpu
2793 interval = 2
2794 format-prefix = " "
2795 format-prefix-foreground = ${colors.foreground-alt}
2796 format-underline = #f90000
2797 label = %percentage%%
2798
2799 [module/memory]
2800 type = internal/memory
2801 interval = 2
2802 format-prefix = " "
2803 format-prefix-foreground = ${colors.foreground-alt}
2804 format-underline = #4bffdc
2805 label = %percentage_used%%
2806
2807 [module/wlan]
2808 type = internal/network
2809 interface =
2810 interval = 3.0
2811
2812 format-connected = <ramp-signal> <label-connected>
2813 format-connected-underline = #9f78e1
2814 label-connected = %essid%
2815
2816 format-disconnected =
2817 ;format-disconnected = <label-disconnected>
2818 ;format-disconnected-underline = ${self.format-connected-underline}
2819 ;label-disconnected = %ifname% disconnected
2820 ;label-disconnected-foreground = ${colors.foreground-alt}
2821
2822 ramp-signal-0 = 
2823 ramp-signal-1 = 
2824 ramp-signal-2 = 
2825 ramp-signal-3 = 
2826 ramp-signal-4 = 
2827 ramp-signal-foreground = ${colors.foreground-alt}
2828
2829 [module/eth]
2830 type = internal/network
2831 interface =
2832 interval = 3.0
2833
2834 format-connected-underline = #55aa55
2835 format-connected-prefix = " "
2836 format-connected-prefix-foreground = ${colors.foreground-alt}
2837 label-connected = %local_ip%
2838
2839 format-disconnected =
2840 ;format-disconnected = <label-disconnected>
2841 ;format-disconnected-underline = ${self.format-connected-underline}
2842 ;label-disconnected = %ifname% disconnected
2843 ;label-disconnected-foreground = ${colors.foreground-alt}
2844
2845 [module/date]
2846 type = internal/date
2847 interval = 5
2848
2849 date =
2850 date-alt = " %Y-%m-%d"
2851
2852 time = %H:%M
2853 time-alt = %H:%M:%S
2854
2855 format-prefix = 
2856 format-prefix-foreground = ${colors.foreground-alt}
2857 format-underline = #0a6cf5
2858
2859 label = %date% %time%
2860
2861 [module/volume]
2862 type = internal/volume
2863
2864 format-volume = <label-volume> <bar-volume>
2865 label-volume = vol
2866 label-volume-foreground = ${root.foreground}
2867
2868 format-muted-prefix = " "
2869 format-muted-foreground = ${colors.foreground-alt}
2870 label-muted = mute
2871
2872 bar-volume-width = 10
2873 bar-volume-foreground-0 = #55aa55
2874 bar-volume-foreground-1 = #55aa55
2875 bar-volume-foreground-2 = #55aa55
2876 bar-volume-foreground-3 = #55aa55
2877 bar-volume-foreground-4 = #55aa55
2878 bar-volume-foreground-5 = #f5a70a
2879 bar-volume-foreground-6 = #ff5555
2880 bar-volume-gradient = false
2881 bar-volume-indicator = |
2882 bar-volume-indicator-font = 2
2883 bar-volume-fill = ─
2884 bar-volume-fill-font = 2
2885 bar-volume-empty = ─
2886 bar-volume-empty-font = 2
2887 bar-volume-empty-foreground = ${colors.foreground-alt}
2888
2889 [module/battery]
2890 type = internal/battery
2891 battery = BAT0
2892 adapter = ADP1
2893 full-at = 64
2894
2895 format-charging = <animation-charging> <label-charging>
2896 format-charging-underline = #ffb52a
2897
2898 format-discharging = <ramp-capacity> <label-discharging>
2899 format-discharging-underline = ${self.format-charging-underline}
2900
2901 format-full-prefix = " "
2902 format-full-prefix-foreground = ${colors.foreground-alt}
2903 format-full-underline = ${self.format-charging-underline}
2904
2905 ramp-capacity-0 = 
2906 ramp-capacity-1 = 
2907 ramp-capacity-2 = 
2908 ramp-capacity-foreground = ${colors.foreground-alt}
2909
2910 animation-charging-0 = 
2911 animation-charging-1 = 
2912 animation-charging-2 = 
2913 animation-charging-foreground = ${colors.foreground-alt}
2914 animation-charging-framerate = 750
2915
2916 [module/temperature]
2917 type = internal/temperature
2918 thermal-zone = 1
2919 warn-temperature = 66
2920
2921 format = <ramp> <label>
2922 format-underline = #f50a4d
2923 format-warn = <ramp> <label-warn>
2924 format-warn-underline = ${self.format-underline}
2925
2926 label = %temperature%
2927 label-warn = %temperature%
2928 label-warn-foreground = ${colors.secondary}
2929
2930 ramp-0 = 
2931 ramp-1 = 
2932 ramp-2 = 
2933 ramp-foreground = ${colors.foreground-alt}
2934
2935 [module/powermenu]
2936 type = custom/menu
2937
2938 format-spacing = 1
2939
2940 label-open = 
2941 label-open-foreground = ${colors.secondary}
2942 label-close =  cancel
2943 label-close-foreground = ${colors.secondary}
2944 label-separator = |
2945 label-separator-foreground = ${colors.foreground-alt}
2946
2947 menu-0-0 = reboot
2948 menu-0-0-exec = menu-open-1
2949 menu-0-1 = power off
2950 menu-0-1-exec = menu-open-2
2951
2952 menu-1-0 = cancel
2953 menu-1-0-exec = menu-open-0
2954 menu-1-1 = reboot
2955 menu-1-1-exec = sudo reboot
2956
2957 menu-2-0 = power off
2958 menu-2-0-exec = sudo poweroff
2959 menu-2-1 = cancel
2960 menu-2-1-exec = menu-open-0
2961
2962 [module/mail]
2963 type = custom/script
2964 interval = 60
2965 format = <label>
2966 format-prefix = " "
2967 format-prefix-foreground = ${colors.foreground-alt}
2968 format-underline = #0a6cf5
2969 exec = notmuch count tag:unread
2970
2971 [settings]
2972 screenchange-reload = true
2973 ;compositing-background = xor
2974 ;compositing-background = screen
2975 ;compositing-foreground = source
2976 ;compositing-border = over
2977
2978 [global/wm]
2979 margin-top = 0
2980 margin-bottom = 0
2981
2982 ; vim:ft=dosini
2983 #+end_src
2984
2985 *** polybar-launch
2986 :PROPERTIES:
2987 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2988 :END:
2989
2990 #+begin_src sh :tangle no
2991 # Terminate already running bar instances
2992 killall -q polybar
2993
2994 # Wait until the processes have been shut down
2995 while pgrep -x polybar >/dev/null; do sleep 1; done
2996
2997 # Launch main bar
2998 polybar main &
2999
3000 echo "Bars launched..."
3001 #+end_src
3002
3003 ** PowerTOP
3004 :PROPERTIES:
3005 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
3006 :END:
3007
3008 #+begin_src conf
3009 [Unit]
3010 Description=Powertop tunings
3011
3012 [Service]
3013 ExecStart=/usr/bin/powertop --auto-tune
3014 RemainAfterExit=true
3015
3016 [Install]
3017 WantedBy=multi-user.target
3018 #+end_src
3019
3020 ** ranger
3021
3022 *** rc.conf
3023 :PROPERTIES:
3024 :header-args+: :tangle ~/.config/ranger/rc.conf
3025 :END:
3026
3027 #+begin_src conf :tangle no
3028 # ===================================================================
3029 # This file contains the default startup commands for ranger.
3030 # To change them, it is recommended to create the file
3031 # ~/.config/ranger/rc.conf and add your custom commands there.
3032 #
3033 # If you copy this whole file there, you may want to set the environment
3034 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
3035 #
3036 # The purpose of this file is mainly to define keybindings and settings.
3037 # For running more complex python code, please create a plugin in "plugins/" or
3038 # a command in "commands.py".
3039 #
3040 # Each line is a command that will be run before the user interface
3041 # is initialized. As a result, you can not use commands which rely
3042 # on the UI such as :delete or :mark.
3043 # ===================================================================
3044
3045 # ===================================================================
3046 # == Options
3047 # ===================================================================
3048
3049 # How many columns are there, and what are their relative widths?
3050 set column_ratios 1,3,4
3051
3052 # Which files should be hidden? (regular expression)
3053 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
3054
3055 # Show hidden files? You can toggle this by typing 'zh'
3056 set show_hidden false
3057
3058 # Ask for a confirmation when running the "delete" command?
3059 # Valid values are "always" (default), "never", "multiple"
3060 # With "multiple", ranger will ask only if you delete multiple files at once.
3061 set confirm_on_delete multiple
3062
3063 # Which script is used to generate file previews?
3064 # ranger ships with scope.sh, a script that calls external programs (see
3065 # README for dependencies) to preview images, archives, etc.
3066 set preview_script ~/.config/ranger/scope.sh
3067
3068 # Use the external preview script or display simple plain text previews?
3069 set use_preview_script true
3070
3071 # Open all images in this directory when running certain image viewers
3072 # like feh or sxiv? You can still open selected files by marking them.
3073 set open_all_images true
3074
3075 # Be aware of version control systems and display information.
3076 set vcs_aware false
3077
3078 # State of the three backends git, hg, bzr. The possible states are
3079 # disabled, local (only show local info), enabled (show local and remote
3080 # information).
3081 set vcs_backend_git enabled
3082 set vcs_backend_hg disabled
3083 set vcs_backend_bzr disabled
3084
3085 # Preview images in full color with the external command "w3mimgpreview"?
3086 # This requires the console web browser "w3m" and a supported terminal.
3087 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3088 set preview_images true
3089
3090 # Use a unicode "..." character to mark cut-off filenames?
3091 set unicode_ellipsis false
3092
3093 # Show dotfiles in the bookmark preview box?
3094 set show_hidden_bookmarks true
3095
3096 # Which colorscheme to use? These colorschemes are available by default:
3097 # default, jungle, snow
3098 set colorscheme default
3099
3100 # Preview files on the rightmost column?
3101 # And collapse (shrink) the last column if there is nothing to preview?
3102 set preview_files true
3103 set preview_directories true
3104 set collapse_preview true
3105
3106 # Save the console history on exit?
3107 set save_console_history true
3108
3109 # Draw the status bar on top of the browser window (default: bottom)
3110 set status_bar_on_top false
3111
3112 # Draw a progress bar in the status bar which displays the average state of all
3113 # currently running tasks which support progress bars?
3114 set draw_progress_bar_in_status_bar true
3115
3116 # Draw borders around columns?
3117 set draw_borders true
3118
3119 # Display the directory name in tabs?
3120 set dirname_in_tabs false
3121
3122 # Enable the mouse support?
3123 set mouse_enabled true
3124
3125 # Display the file size in the main column or status bar?
3126 set display_size_in_main_column true
3127 set display_size_in_status_bar true
3128
3129 # Display files tags in all columns or only in main column?
3130 set display_tags_in_all_columns true
3131
3132 # Set a title for the window?
3133 set update_title false
3134
3135 # Set the title to "ranger" in the tmux program?
3136 set update_tmux_title false
3137
3138 # Shorten the title if it gets long? The number defines how many
3139 # directories are displayed at once, 0 turns off this feature.
3140 set shorten_title 3
3141
3142 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3143 set tilde_in_titlebar false
3144
3145 # How many directory-changes or console-commands should be kept in history?
3146 set max_history_size 20
3147 set max_console_history_size 50
3148
3149 # Try to keep so much space between the top/bottom border when scrolling:
3150 set scroll_offset 8
3151
3152 # Flush the input after each key hit? (Noticable when ranger lags)
3153 set flushinput true
3154
3155 # Padding on the right when there's no preview?
3156 # This allows you to click into the space to run the file.
3157 set padding_right true
3158
3159 # Save bookmarks (used with mX and `X) instantly?
3160 # This helps to synchronize bookmarks between multiple ranger
3161 # instances but leads to *slight* performance loss.
3162 # When false, bookmarks are saved when ranger is exited.
3163 set autosave_bookmarks true
3164
3165 # You can display the "real" cumulative size of directories by using the
3166 # command :get_cumulative_size or typing "dc". The size is expensive to
3167 # calculate and will not be updated automatically. You can choose
3168 # to update it automatically though by turning on this option:
3169 set autoupdate_cumulative_size false
3170
3171 # Turning this on makes sense for screen readers:
3172 set show_cursor false
3173
3174 # One of: size, basename, mtime, type
3175 set sort natural
3176
3177 # Additional sorting options
3178 set sort_reverse false
3179 set sort_case_insensitive true
3180 set sort_directories_first true
3181
3182 # Enable this if key combinations with the Alt Key don't work for you.
3183 # (Especially on xterm)
3184 set xterm_alt_key false
3185
3186 # ===================================================================
3187 # == Local Options
3188 # ===================================================================
3189 # You can set local options that only affect a single directory.
3190
3191 # Examples:
3192 # setlocal path=~/downloads sort mtime
3193
3194 # ===================================================================
3195 # == Command Aliases in the Console
3196 # ===================================================================
3197
3198 alias e edit
3199 alias q quit
3200 alias q! quitall
3201 alias qall quitall
3202 alias setl setlocal
3203
3204 alias filter scout -prt
3205 alias find scout -aet
3206 alias mark scout -mr
3207 alias unmark scout -Mr
3208 alias search scout -rs
3209 alias search_inc scout -rts
3210 alias travel scout -aefiklst
3211
3212 # ===================================================================
3213 # == Define keys for the browser
3214 # ===================================================================
3215
3216 # Basic
3217 map Q quit!
3218 map q quit
3219 copymap q ZZ ZQ
3220
3221 map R reload_cwd
3222 map <C-r> reset
3223 map <C-l> redraw_window
3224 map <C-c> abort
3225 map <esc> change_mode normal
3226
3227 map i display_file
3228 map ? help
3229 map W display_log
3230 map w taskview_open
3231 map S shell $SHELL
3232
3233 map : console
3234 map ; console
3235 map ! console shell
3236 map @ console -p6 shell %%s
3237 map # console shell -p
3238 map s console shell
3239 map r chain draw_possible_programs; console open_with
3240 map f console find
3241 map cd console cd
3242
3243 # Tagging / Marking
3244 map t tag_toggle
3245 map ut tag_remove
3246 map "<any> tag_toggle tag=%any
3247 map <Space> mark_files toggle=True
3248 map v mark_files all=True toggle=True
3249 map uv mark_files all=True val=False
3250 map V toggle_visual_mode
3251 map uV toggle_visual_mode reverse=True
3252
3253 # For the nostalgics: Midnight Commander bindings
3254 map <F1> help
3255 map <F3> display_file
3256 map <F4> edit
3257 map <F5> copy
3258 map <F6> cut
3259 map <F7> console mkdir
3260 map <F8> console delete
3261 map <F10> exit
3262
3263 # In case you work on a keyboard with dvorak layout
3264 map <UP> move up=1
3265 map <DOWN> move down=1
3266 map <LEFT> move left=1
3267 map <RIGHT> move right=1
3268 map <HOME> move to=0
3269 map <END> move to=-1
3270 map <PAGEDOWN> move down=1 pages=True
3271 map <PAGEUP> move up=1 pages=True
3272 map <CR> move right=1
3273 map <DELETE> console delete
3274 map <INSERT> console touch
3275
3276 # VIM-like
3277 copymap <UP> k
3278 copymap <DOWN> j
3279 copymap <LEFT> h
3280 copymap <RIGHT> l
3281 copymap <HOME> gg
3282 copymap <END> G
3283 copymap <PAGEDOWN> <C-F>
3284 copymap <PAGEUP> <C-B>
3285
3286 map J move down=0.5 pages=True
3287 map K move up=0.5 pages=True
3288 copymap J <C-D>
3289 copymap K <C-U>
3290
3291 # Jumping around
3292 map H history_go -1
3293 map L history_go 1
3294 map ] move_parent 1
3295 map [ move_parent -1
3296 map } traverse
3297
3298 map gh cd ~
3299 map ge cd /etc
3300 map gu cd /usr
3301 map gd cd /dev
3302 map gl cd -r .
3303 map gL cd -r %f
3304 map go cd /opt
3305 map gv cd /var
3306 map gm cd /media
3307 map gM cd /mnt
3308 map gs cd /srv
3309 map gr cd /
3310 map gR eval fm.cd(ranger.RANGERDIR)
3311 map g/ cd /
3312 map g? cd /usr/share/doc/ranger
3313
3314 # External Programs
3315 map E edit
3316 map du shell -p du --max-depth=1 -h --apparent-size
3317 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3318 map yp shell -d echo -n %d/%f | xsel -i
3319 map yd shell -d echo -n %d | xsel -i
3320 map yn shell -d echo -n %f | xsel -i
3321
3322 # Filesystem Operations
3323 map = chmod
3324
3325 map cw console rename
3326 map A eval fm.open_console('rename ' + fm.thisfile.basename)
3327 map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3328
3329 map pp paste
3330 map po paste overwrite=True
3331 map pl paste_symlink relative=False
3332 map pL paste_symlink relative=True
3333 map phl paste_hardlink
3334 map pht paste_hardlinked_subtree
3335
3336 map dd cut
3337 map ud uncut
3338 map da cut mode=add
3339 map dr cut mode=remove
3340
3341 map yy copy
3342 map uy uncut
3343 map ya copy mode=add
3344 map yr copy mode=remove
3345
3346 # Temporary workarounds
3347 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3348 map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3349 map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3350 map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3351 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3352 map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3353 map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3354 map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3355
3356 # Searching
3357 map / console search
3358 map n search_next
3359 map N search_next forward=False
3360 map ct search_next order=tag
3361 map cs search_next order=size
3362 map ci search_next order=mimetype
3363 map cc search_next order=ctime
3364 map cm search_next order=mtime
3365 map ca search_next order=atime
3366
3367 # Tabs
3368 map <C-n> tab_new ~
3369 map <C-w> tab_close
3370 map <TAB> tab_move 1
3371 map <S-TAB> tab_move -1
3372 map <A-Right> tab_move 1
3373 map <A-Left> tab_move -1
3374 map gt tab_move 1
3375 map gT tab_move -1
3376 map gn tab_new ~
3377 map gc tab_close
3378 map uq tab_restore
3379 map <a-1> tab_open 1
3380 map <a-2> tab_open 2
3381 map <a-3> tab_open 3
3382 map <a-4> tab_open 4
3383 map <a-5> tab_open 5
3384 map <a-6> tab_open 6
3385 map <a-7> tab_open 7
3386 map <a-8> tab_open 8
3387 map <a-9> tab_open 9
3388
3389 # Sorting
3390 map or toggle_option sort_reverse
3391 map os chain set sort=size; set sort_reverse=False
3392 map ob chain set sort=basename; set sort_reverse=False
3393 map on chain set sort=natural; set sort_reverse=False
3394 map om chain set sort=mtime; set sort_reverse=False
3395 map oc chain set sort=ctime; set sort_reverse=False
3396 map oa chain set sort=atime; set sort_reverse=False
3397 map ot chain set sort=type; set sort_reverse=False
3398
3399 map oS chain set sort=size; set sort_reverse=True
3400 map oB chain set sort=basename; set sort_reverse=True
3401 map oN chain set sort=natural; set sort_reverse=True
3402 map oM chain set sort=mtime; set sort_reverse=True
3403 map oC chain set sort=ctime; set sort_reverse=True
3404 map oA chain set sort=atime; set sort_reverse=True
3405 map oT chain set sort=type; set sort_reverse=True
3406
3407 map dc get_cumulative_size
3408
3409 # Settings
3410 map zc toggle_option collapse_preview
3411 map zd toggle_option sort_directories_first
3412 map zh toggle_option show_hidden
3413 map <C-h> toggle_option show_hidden
3414 map zi toggle_option flushinput
3415 map zm toggle_option mouse_enabled
3416 map zp toggle_option preview_files
3417 map zP toggle_option preview_directories
3418 map zs toggle_option sort_case_insensitive
3419 map zu toggle_option autoupdate_cumulative_size
3420 map zv toggle_option use_preview_script
3421 map zf console filter
3422
3423 # Bookmarks
3424 map `<any> enter_bookmark %any
3425 map '<any> enter_bookmark %any
3426 map m<any> set_bookmark %any
3427 map um<any> unset_bookmark %any
3428
3429 map m<bg> draw_bookmarks
3430 copymap m<bg> um<bg> `<bg> '<bg>
3431
3432 # Generate all the chmod bindings with some python help:
3433 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3434 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3435 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3436 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3437 eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3438
3439 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3440 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3441 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3442 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3443 eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3444
3445 # ===================================================================
3446 # == Define keys for the console
3447 # ===================================================================
3448 # Note: Unmapped keys are passed directly to the console.
3449
3450 # Basic
3451 cmap <tab> eval fm.ui.console.tab()
3452 cmap <s-tab> eval fm.ui.console.tab(-1)
3453 cmap <ESC> eval fm.ui.console.close()
3454 cmap <CR> eval fm.ui.console.execute()
3455 cmap <C-l> redraw_window
3456
3457 copycmap <ESC> <C-c>
3458 copycmap <CR> <C-j>
3459
3460 # Move around
3461 cmap <up> eval fm.ui.console.history_move(-1)
3462 cmap <down> eval fm.ui.console.history_move(1)
3463 cmap <left> eval fm.ui.console.move(left=1)
3464 cmap <right> eval fm.ui.console.move(right=1)
3465 cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3466 cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3467
3468 # Line Editing
3469 cmap <backspace> eval fm.ui.console.delete(-1)
3470 cmap <delete> eval fm.ui.console.delete(0)
3471 cmap <C-w> eval fm.ui.console.delete_word()
3472 cmap <C-k> eval fm.ui.console.delete_rest(1)
3473 cmap <C-u> eval fm.ui.console.delete_rest(-1)
3474 cmap <C-y> eval fm.ui.console.paste()
3475
3476 # And of course the emacs way
3477 copycmap <up> <C-p>
3478 copycmap <down> <C-n>
3479 copycmap <left> <C-b>
3480 copycmap <right> <C-f>
3481 copycmap <home> <C-a>
3482 copycmap <end> <C-e>
3483 copycmap <delete> <C-d>
3484 copycmap <backspace> <C-h>
3485
3486 # Note: There are multiple ways to express backspaces. <backspace> (code 263)
3487 # and <backspace2> (code 127). To be sure, use both.
3488 copycmap <backspace> <backspace2>
3489
3490 # This special expression allows typing in numerals:
3491 cmap <allow_quantifiers> false
3492
3493 # ===================================================================
3494 # == Pager Keybindings
3495 # ===================================================================
3496
3497 # Movement
3498 pmap <down> pager_move down=1
3499 pmap <up> pager_move up=1
3500 pmap <left> pager_move left=4
3501 pmap <right> pager_move right=4
3502 pmap <home> pager_move to=0
3503 pmap <end> pager_move to=-1
3504 pmap <pagedown> pager_move down=1.0 pages=True
3505 pmap <pageup> pager_move up=1.0 pages=True
3506 pmap <C-d> pager_move down=0.5 pages=True
3507 pmap <C-u> pager_move up=0.5 pages=True
3508
3509 copypmap <UP> k <C-p>
3510 copypmap <DOWN> j <C-n> <CR>
3511 copypmap <LEFT> h
3512 copypmap <RIGHT> l
3513 copypmap <HOME> g
3514 copypmap <END> G
3515 copypmap <C-d> d
3516 copypmap <C-u> u
3517 copypmap <PAGEDOWN> n f <C-F> <Space>
3518 copypmap <PAGEUP> p b <C-B>
3519
3520 # Basic
3521 pmap <ESC> pager_close
3522 copypmap <ESC> q Q i <F3>
3523 pmap E edit_file
3524
3525 # ===================================================================
3526 # == Taskview Keybindings
3527 # ===================================================================
3528
3529 # Movement
3530 tmap <up> taskview_move up=1
3531 tmap <down> taskview_move down=1
3532 tmap <home> taskview_move to=0
3533 tmap <end> taskview_move to=-1
3534 tmap <pagedown> taskview_move down=1.0 pages=True
3535 tmap <pageup> taskview_move up=1.0 pages=True
3536 tmap <C-d> taskview_move down=0.5 pages=True
3537 tmap <C-u> taskview_move up=0.5 pages=True
3538
3539 copytmap <UP> k <C-p>
3540 copytmap <DOWN> j <C-n> <CR>
3541 copytmap <HOME> g
3542 copytmap <END> G
3543 copytmap <C-u> u
3544 copytmap <PAGEDOWN> n f <C-F> <Space>
3545 copytmap <PAGEUP> p b <C-B>
3546
3547 # Changing priority and deleting tasks
3548 tmap J eval -q fm.ui.taskview.task_move(-1)
3549 tmap K eval -q fm.ui.taskview.task_move(0)
3550 tmap dd eval -q fm.ui.taskview.task_remove()
3551 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3552 tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3553 tmap <delete> eval -q fm.ui.taskview.task_remove()
3554
3555 # Basic
3556 tmap <ESC> taskview_close
3557 copytmap <ESC> q Q w <C-c>
3558 #+end_src
3559
3560 *** scope.sh
3561 :PROPERTIES:
3562 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3563 :END:
3564
3565 #+begin_src sh :tangle no
3566 # ranger supports enhanced previews. If the option "use_preview_script"
3567 # is set to True and this file exists, this script will be called and its
3568 # output is displayed in ranger. ANSI color codes are supported.
3569
3570 # NOTES: This script is considered a configuration file. If you upgrade
3571 # ranger, it will be left untouched. (You must update it yourself.)
3572 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3573
3574 # Meanings of exit codes:
3575 # code | meaning | action of ranger
3576 # -----+------------+-------------------------------------------
3577 # 0 | success | success. display stdout as preview
3578 # 1 | no preview | failure. display no preview at all
3579 # 2 | plain text | display the plain content of the file
3580 # 3 | fix width | success. Don't reload when width changes
3581 # 4 | fix height | success. Don't reload when height changes
3582 # 5 | fix both | success. Don't ever reload
3583
3584 # Meaningful aliases for arguments:
3585 path="$1" # Full path of the selected file
3586 width="$2" # Width of the preview pane (number of fitting characters)
3587 height="$3" # Height of the preview pane (number of fitting characters)
3588
3589 maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3590
3591 # Find out something about the file:
3592 mimetype=$(file --mime-type -Lb "$path")
3593 extension=${path##*.}
3594
3595 # Functions:
3596 # runs a command and saves its output into $output. Useful if you need
3597 # the return value AND want to use the output in a pipe
3598 try() { output=$(eval '"$@"'); }
3599
3600 # writes the output of the previouosly used "try" command
3601 dump() { echo "$output"; }
3602
3603 # a common post-processing function used after most commands
3604 trim() { head -n "$maxln"; }
3605
3606 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3607 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3608
3609 case "$extension" in
3610 # Archive extensions:
3611 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3612 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3613 try als "$path" && { dump | trim; exit 0; }
3614 try acat "$path" && { dump | trim; exit 3; }
3615 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3616 exit 1;;
3617 rar)
3618 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3619 # PDF documents:
3620 pdf)
3621 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3622 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3623 # BitTorrent Files
3624 torrent)
3625 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3626 # HTML Pages:
3627 htm|html|xhtml)
3628 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3629 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3630 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3631 ;; # fall back to highlight/cat if the text browsers fail
3632 esac
3633
3634 case "$mimetype" in
3635 # Syntax highlight for text files:
3636 text/* | */xml)
3637 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3638 # Ascii-previews of images:
3639 image/*)
3640 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3641 # Display information about media files:
3642 video/* | audio/*)
3643 exiftool "$path" && exit 5
3644 # Use sed to remove spaces so the output fits into the narrow window
3645 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3646 esac
3647
3648 exit 1
3649 #+end_src
3650
3651 ** redshift
3652 :PROPERTIES:
3653 :header-args+: :tangle ~/.config/redshift.conf :comments none
3654 :END:
3655
3656 #+begin_src conf
3657 ; Global settings for redshift
3658 [redshift]
3659 ; Set the day and night screen temperatures (Neutral is 6500K)
3660 ;temp-day=5700
3661 ;temp-night=3500
3662
3663 ;temp-day=6500
3664 temp-day=6200
3665 ;temp-night=4800
3666 ;temp-night=5000
3667 ;temp-night=4500
3668 temp-night=4000
3669
3670 ; Enable/Disable a smooth transition between day and night
3671 ; 0 will cause a direct change from day to night screen temperature.
3672 ; 1 will gradually increase or decrease the screen temperature.
3673 transition=1
3674
3675 ; Set the screen brightness. Default is 1.0.
3676 ;brightness=0.9
3677 ; It is also possible to use different settings for day and night
3678 ; since version 1.8.
3679 ;brightness-day=0.7
3680 ;brightness-night=0.4
3681 ; Set the screen gamma (for all colors, or each color channel
3682 ; individually)
3683 ;gamma=0.8
3684 ;gamma=1.0
3685 ;gamma=0.8:0.7:0.8
3686 ; This can also be set individually for day and night since
3687 ; version 1.10.
3688 ;gamma-day=0.8:0.7:0.8
3689 ;gamma-night=0.6
3690
3691 ; Set the location-provider: 'geoclue2' or 'manual'
3692 ; type 'redshift -l list' to see possible values.
3693 ; The location provider settings are in a different section.
3694 ;location-provider=manual
3695 location-provider=geoclue2
3696
3697 ; Set the adjustment-method: 'randr', 'vidmode'
3698 ; type 'redshift -m list' to see all possible values.
3699 ; 'randr' is the preferred method, 'vidmode' is an older API.
3700 ; but works in some cases when 'randr' does not.
3701 ; The adjustment method settings are in a different section.
3702 adjustment-method=randr
3703
3704 ; Configuration of the location-provider:
3705 ; type 'redshift -l PROVIDER:help' to see the settings.
3706 ; ex: 'redshift -l manual:help'
3707 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3708 ; are negative numbers.
3709 ;[manual]
3710 ;lat=48.1
3711 ;lon=11.6
3712
3713 ; Configuration of the adjustment-method
3714 ; type 'redshift -m METHOD:help' to see the settings.
3715 ; ex: 'redshift -m randr:help'
3716 ; In this example, randr is configured to adjust screen 1.
3717 ; Note that the numbering starts from 0, so this is actually the
3718 ; second screen. If this option is not specified, Redshift will try
3719 ; to adjust _all_ screens.
3720 ;[randr]
3721 ;screen=1
3722 #+end_src
3723
3724 ** rofi
3725 :PROPERTIES:
3726 :header-args+: :tangle ~/.config/rofi/config
3727 :END:
3728
3729 #+begin_src conf
3730 ! rofi.font: Ubuntu Mono 13
3731 ! rofi.font: Inconsolata 16
3732 ! rofi.font: Iosevka 13
3733 ! rofi.font: Source Code Pro 11
3734 rofi.font: Source Code Pro 10.5
3735 rofi.modi: run,window
3736 ! rofi.width: 640
3737 rofi.width: 600
3738 !rofi.location: 2
3739 !rofi.yoffset: 200
3740 rofi.monitor: -1
3741 !rofi.lines: 10
3742
3743 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3744 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3745 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3746
3747 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3748 #+end_src
3749
3750 ** rofi-pass
3751 :PROPERTIES:
3752 :header-args+: :tangle ~/.config/rofi-pass/config
3753 :END:
3754
3755 #+begin_src conf
3756 # permanently set alternative root dir
3757 # root=/path/to/root
3758
3759 # rofi command. Make sure to have "$@" as last argument
3760 _rofi () {
3761 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3762 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3763 }
3764
3765 # xdotool needs the keyboard layout to be set using setxkbmap
3766 # You can do this in your autostart scripts (e.g. xinitrc)
3767
3768 # If for some reason, you cannot do this, you can set the command here.
3769 # and set fix_layout to true
3770 fix_layout=false
3771
3772 layout_cmd () {
3773 setxkbmap us
3774 }
3775
3776 # fields to be used
3777 URL_field='url'
3778 USERNAME_field='user'
3779 AUTOTYPE_field='autotype'
3780
3781 # delay to be used for :delay keyword
3782 delay=2
3783
3784 ## Programs to be used
3785 # Editor
3786 EDITOR='gvim -f'
3787
3788 # Browser
3789 BROWSER='chromium'
3790
3791 ## Misc settings
3792
3793 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3794 auto_enter='false'
3795 notify='false'
3796 default_autotype='user :tab pass'
3797
3798 # color of the help messages
3799 # leave empty for autodetection
3800 help_color="#4872FF"
3801
3802 # Clipboard settings
3803 # Possible options: primary, clipboard, both
3804 clip=primary
3805
3806 # Options for generating new password entries
3807 # default_user is also used for password files that have no user field.
3808 default_user=aminb
3809 default_user2=aminban
3810 password_length=30
3811
3812 # Custom Keybindings
3813 #autotype="Alt+1"
3814 autotype="Alt+m"
3815 type_user="Alt+2"
3816 type_pass="Alt+3"
3817 open_url="Alt+4"
3818 copy_name="Alt+u"
3819 copy_url="Alt+l"
3820 copy_pass="Alt+p"
3821 show="Alt+o"
3822 copy_entry="Alt+2"
3823 type_entry="Alt+1"
3824 copy_menu="Alt+c"
3825 action_menu="Alt+a"
3826 type_menu="Alt+t"
3827 help="Alt+h"
3828 switch="Alt+x"
3829 insert_pass="Alt+n"
3830 #+end_src
3831
3832 ** sway
3833
3834 *** main
3835 :PROPERTIES:
3836 :header-args+: :tangle ~/.config/sway/config
3837 :END:
3838
3839 #+begin_src conf
3840 ### Variables
3841 # super
3842 set $mod Mod4
3843 # alt
3844 set $mod2 Mod1
3845 set $left h
3846 set $down j
3847 set $up k
3848 set $right l
3849 set $term urxvt
3850 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3851
3852 ### Output configuration
3853 #
3854 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3855 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3856 #
3857 # Example configuration:
3858 #
3859 # output HDMI-A-1 resolution 1920x1080 position 1920,0
3860 #
3861 # You can get the names of your outputs by running: swaymsg -t get_outputs
3862
3863 ### Idle configuration
3864
3865 exec swayidle \
3866 timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
3867 resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
3868
3869
3870 ### Key bindings
3871 #
3872 # Basics:
3873 #
3874 # start a terminal
3875 bindsym $mod+Return exec $term
3876
3877 # kill focused window
3878 bindsym $mod+Shift+q kill
3879
3880 # start your launcher
3881 bindsym $mod+d exec $menu
3882
3883 # password manager
3884 bindsym $mod2+space exec rofi-pass
3885
3886 # Drag floating windows by holding down $mod and left mouse button.
3887 # Resize them with right mouse button + $mod.
3888 # Despite the name, also works for non-floating windows.
3889 # Change normal to inverse to use left mouse button for resizing and right
3890 # mouse button for dragging.
3891 floating_modifier $mod normal
3892
3893 # reload the configuration file
3894 bindsym $mod+Shift+c reload
3895
3896 # exit sway (logs you out of your wayland session)
3897 bindsym $mod+Shift+e exit
3898
3899 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3900 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3901 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3902
3903 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3904 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3905 bindsym XF86AudioMute exec pamixer --toggle-mute
3906 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3907
3908 bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
3909
3910 # original sway workspace switch and window move
3911 bindsym $mod+bracketleft workspace prev
3912 bindsym $mod+bracketright workspace next
3913 bindsym $mod+braceleft move container to workspace prev
3914 bindsym $mod+braceright move container to workspace next
3915
3916 # bspwm-esque workspace switch and window move
3917 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3918 bindsym $mod2+bracketright exec sway-ws-util switch next
3919 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3920 bindsym $mod2+braceright exec sway-ws-util move next follow
3921 #
3922 # Moving around:
3923 #
3924 # Move your focus around
3925 bindsym $mod+$left focus left
3926 bindsym $mod+$down focus down
3927 bindsym $mod+$up focus up
3928 bindsym $mod+$right focus right
3929 # or use $mod+[up|down|left|right]
3930 bindsym $mod+Left focus left
3931 bindsym $mod+Down focus down
3932 bindsym $mod+Up focus up
3933 bindsym $mod+Right focus right
3934
3935 # _move_ the focused window with the same, but add Shift
3936 bindsym $mod+Shift+$left move left
3937 bindsym $mod+Shift+$down move down
3938 bindsym $mod+Shift+$up move up
3939 bindsym $mod+Shift+$right move right
3940 # ditto, with arrow keys
3941 bindsym $mod+Shift+Left move left
3942 bindsym $mod+Shift+Down move down
3943 bindsym $mod+Shift+Up move up
3944 bindsym $mod+Shift+Right move right
3945 #
3946 # Workspaces:
3947 #
3948 # switch to workspace
3949 bindsym $mod+1 workspace 1
3950 bindsym $mod+2 workspace 2
3951 bindsym $mod+3 workspace 3
3952 bindsym $mod+4 workspace 4
3953 bindsym $mod+5 workspace 5
3954 bindsym $mod+6 workspace 6
3955 bindsym $mod+7 workspace 7
3956 bindsym $mod+8 workspace 8
3957 bindsym $mod+9 workspace 9
3958 bindsym $mod+0 workspace 10
3959 # move focused container to workspace
3960 bindsym $mod+Shift+1 move container to workspace 1
3961 bindsym $mod+Shift+2 move container to workspace 2
3962 bindsym $mod+Shift+3 move container to workspace 3
3963 bindsym $mod+Shift+4 move container to workspace 4
3964 bindsym $mod+Shift+5 move container to workspace 5
3965 bindsym $mod+Shift+6 move container to workspace 6
3966 bindsym $mod+Shift+7 move container to workspace 7
3967 bindsym $mod+Shift+8 move container to workspace 8
3968 bindsym $mod+Shift+9 move container to workspace 9
3969 bindsym $mod+Shift+0 move container to workspace 10
3970 # Note: workspaces can have any name you want, not just numbers.
3971 # We just use 1-10 as the default.
3972 #
3973 # Layout stuff:
3974 #
3975 # You can "split" the current object of your focus with
3976 # $mod+b or $mod+v, for horizontal and vertical splits
3977 # respectively.
3978 bindsym $mod+b splith
3979 bindsym $mod+v splitv
3980
3981 # Switch the current container between different layout styles
3982 bindsym $mod+s layout stacking
3983 bindsym $mod+w layout tabbed
3984 bindsym $mod+e layout toggle split
3985
3986 # Make the current focus fullscreen
3987 bindsym $mod+f fullscreen
3988
3989 # Toggle the current focus between tiling and floating mode
3990 bindsym $mod+Shift+space floating toggle
3991
3992 # Swap focus between the tiling area and the floating area
3993 bindsym $mod+space focus mode_toggle
3994
3995 # move focus to the parent container
3996 bindsym $mod+a focus parent
3997 #
3998 # Scratchpad:
3999 #
4000 # Sway has a "scratchpad", which is a bag of holding for windows.
4001 # You can send windows there and get them back later.
4002
4003 # Move the currently focused window to the scratchpad
4004 bindsym $mod+Shift+minus move scratchpad
4005
4006 # Show the next scratchpad window or hide the focused scratchpad window.
4007 # If there are multiple scratchpad windows, this command cycles through them.
4008 bindsym $mod+minus scratchpad show
4009 #
4010 # Resizing containers:
4011 #
4012 mode "resize" {
4013 # left will shrink the containers width
4014 # right will grow the containers width
4015 # up will shrink the containers height
4016 # down will grow the containers height
4017 bindsym $left resize shrink width 10px
4018 bindsym $down resize grow height 10px
4019 bindsym $up resize shrink height 10px
4020 bindsym $right resize grow width 10px
4021
4022 # ditto, with arrow keys
4023 bindsym Left resize shrink width 10px
4024 bindsym Down resize grow height 10px
4025 bindsym Up resize shrink height 10px
4026 bindsym Right resize grow width 10px
4027
4028 # return to default mode
4029 bindsym Return mode "default"
4030 bindsym Escape mode "default"
4031 }
4032 bindsym $mod+Shift+r mode "resize"
4033
4034 #
4035 # Power button
4036 #
4037
4038 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
4039 mode "$mode_system" {
4040 bindsym l exec swaylock, mode "default"
4041 bindsym e exec swaymsg exit, mode "default"
4042 bindsym s exec systemctl suspend, mode "default"
4043 bindsym h exec systemctl hibernate, mode "default"
4044 bindsym r exec systemctl reboot, mode "default"
4045 bindsym Shift+s exec systemctl poweroff -i, mode "default"
4046
4047 # back to normal: Enter, Escape, or q
4048 bindsym Return mode "default"
4049 bindsym Escape mode "default"
4050 bindsym q mode "default"
4051 }
4052 bindsym XF86PowerOff mode "$mode_system"
4053
4054 #
4055 # Presentation mode
4056 #
4057
4058 bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
4059
4060 #
4061 # Notifications
4062 #
4063
4064 bindsym $mod+Shift+n mode notifications
4065 mode notifications {
4066 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
4067 bindsym d exec makoctl dismiss; mode default
4068 bindsym Shift+d exec makoctl dismiss -a; mode default
4069
4070 bindsym Escape mode default
4071 bindsym q mode default
4072 }
4073
4074 #
4075 # Screenshotting
4076 #
4077
4078 bindsym $mod+Shift+s mode screenshot
4079 mode screenshot {
4080 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4081 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4082
4083 bindsym Escape mode default
4084 bindsym q mode default
4085 }
4086
4087 #
4088 # Status Bar:
4089 #
4090 # Read `man 5 sway-bar` for more information about this section.
4091 bar {
4092 position bottom
4093 colors {
4094 statusline #ffffff
4095 background #323232
4096 inactive_workspace #32323200 #32323200 #5c5c5c
4097 }
4098 status_command i3status | my-i3status.py
4099 }
4100
4101 # font pango: benis uushi 9
4102 # font pango: Ubuntu Mono 11
4103 # font pango: Inconsolata 11
4104 font pango: DejaVu Sans Mono 9
4105 # font pango: Liberation Mono 9
4106
4107 exec xrdb .Xresources
4108 exec pgrep -x "systemd-inhibit" || \
4109 systemd-inhibit --what=handle-power-key --who=aminb \
4110 --why="Handle power button in sway" sleep infinity
4111 exec mako 2>&1 >/tmp/mako.log
4112 exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4113
4114 include /etc/sway/config.d/*
4115 include ~/.config/sway/`hostname`
4116
4117 exec systemd-notify --ready || true
4118
4119 #+end_src
4120
4121 *** langa
4122 :PROPERTIES:
4123 :header-args+: :tangle ~/.config/sway/langa
4124 :END:
4125
4126 #+begin_src conf
4127 input "2:7:SynPS/2_Synaptics_TouchPad" {
4128 events disabled
4129 dwt enabled
4130 tap enabled
4131 natural_scroll enabled
4132 click_method clickfinger
4133 }
4134
4135 input "1:1:AT_Translated_Set_2_keyboard" {
4136 repeat_delay 200
4137 repeat_rate 45
4138 xkb_layout us_ab,ir
4139 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4140 }
4141 #+end_src
4142
4143 *** shemshak
4144 :PROPERTIES:
4145 :header-args+: :tangle ~/.config/sway/shemshak
4146 :END:
4147
4148 #+begin_src conf
4149 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4150 dwt enabled
4151 tap enabled
4152 natural_scroll enabled
4153 middle_emulation enabled
4154 click_method clickfinger
4155 }
4156
4157 input "1:1:AT_Translated_Set_2_keyboard" {
4158 repeat_delay 200
4159 repeat_rate 45
4160 xkb_layout us,ir
4161 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4162 }
4163 #+end_src
4164 ** swaylock
4165 :PROPERTIES:
4166 :header-args+: :tangle ~/.config/swaylock/config
4167 :END:
4168
4169 #+begin_src conf
4170 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4171 scaling=fill
4172 #+end_src
4173
4174 ** TLP
4175
4176 *** langa
4177
4178 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4179 # ------------------------------------------------------------------------------
4180 # tlp - Parameters for power saving
4181 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4182
4183 # Hint: some features are disabled by default, remove the leading # to enable
4184 # them.
4185
4186 # Set to 0 to disable, 1 to enable TLP.
4187 TLP_ENABLE=1
4188
4189 # Operation mode when no power supply can be detected: AC, BAT.
4190 # Concerns some desktop and embedded hardware only.
4191 TLP_DEFAULT_MODE=AC
4192
4193 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4194 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4195 TLP_PERSISTENT_DEFAULT=0
4196
4197 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4198 # Non-zero value enables, zero disables laptop mode.
4199 DISK_IDLE_SECS_ON_AC=0
4200 DISK_IDLE_SECS_ON_BAT=2
4201
4202 # Dirty page values (timeouts in secs).
4203 MAX_LOST_WORK_SECS_ON_AC=15
4204 MAX_LOST_WORK_SECS_ON_BAT=60
4205
4206 # Hint: CPU parameters below are disabled by default, remove the leading #
4207 # to enable them, otherwise kernel default values are used.
4208
4209 # Select a CPU frequency scaling governor.
4210 # Intel Core i processor with intel_pstate driver:
4211 # powersave(*), performance.
4212 # Older hardware with acpi-cpufreq driver:
4213 # ondemand(*), powersave, performance, conservative, schedutil.
4214 # (*) is recommended.
4215 # Hint: use tlp-stat -p to show the active driver and available governors.
4216 # Important:
4217 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
4218 # efficient for *almost all* workloads and therefore kernel and most
4219 # distributions have chosen them as defaults. If you still want to change,
4220 # you should know what you're doing! You *must* disable your distribution's
4221 # governor settings or conflicts will occur.
4222 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4223 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4224
4225 # Set the min/max frequency available for the scaling governor.
4226 # Possible values strongly depend on your CPU. For available frequencies see
4227 # the output of tlp-stat -p.
4228 #CPU_SCALING_MIN_FREQ_ON_AC=0
4229 #CPU_SCALING_MAX_FREQ_ON_AC=0
4230 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4231 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4232
4233 # Set energy performance hints (HWP) for Intel P-state governor:
4234 # performance, balance_performance, default, balance_power, power
4235 # Values are given in order of increasing power saving.
4236 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4237 CPU_HWP_ON_AC=balance_performance
4238 CPU_HWP_ON_BAT=balance_power
4239
4240 # Set Intel P-state performance: 0..100 (%).
4241 # Limit the max/min P-state to control the power dissipation of the CPU.
4242 # Values are stated as a percentage of the available performance.
4243 # Requires an Intel Core i processor with intel_pstate driver.
4244 #CPU_MIN_PERF_ON_AC=0
4245 #CPU_MAX_PERF_ON_AC=100
4246 #CPU_MIN_PERF_ON_BAT=0
4247 #CPU_MAX_PERF_ON_BAT=30
4248
4249 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4250 # Requires an Intel Core i processor.
4251 # Important:
4252 # - This may conflict with your distribution's governor settings
4253 # - A value of 1 does *not* activate boosting, it just allows it
4254 #CPU_BOOST_ON_AC=1
4255 #CPU_BOOST_ON_BAT=0
4256
4257 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4258 # 0=disable, 1=enable.
4259 SCHED_POWERSAVE_ON_AC=0
4260 SCHED_POWERSAVE_ON_BAT=1
4261
4262 # Kernel NMI Watchdog:
4263 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
4264 NMI_WATCHDOG=0
4265
4266 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4267 # Frequency voltage pairs are written to:
4268 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4269 # CAUTION: only use this, if you thoroughly understand what you are doing!
4270 #PHC_CONTROLS="F:V F:V F:V F:V"
4271
4272 # Set CPU performance versus energy savings policy:
4273 # performance, balance-performance, default, balance-power, power.
4274 # Values are given in order of increasing power saving.
4275 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4276 ENERGY_PERF_POLICY_ON_AC=performance
4277 ENERGY_PERF_POLICY_ON_BAT=balance-power
4278
4279 # Disk devices; separate multiple devices with spaces (default: sda).
4280 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4281 DISK_DEVICES="sda sdb"
4282
4283 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4284 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4285 # Separate values for multiple disks with spaces. Use the special value 'keep'
4286 # to keep the hardware default for the particular disk.
4287 DISK_APM_LEVEL_ON_AC="254 254"
4288 DISK_APM_LEVEL_ON_BAT="128 128"
4289
4290 # Hard disk spin down timeout:
4291 # 0: spin down disabled
4292 # 1..240: timeouts from 5s to 20min (in units of 5s)
4293 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4294 # See 'man hdparm' for details.
4295 # Separate values for multiple disks with spaces. Use the special value 'keep'
4296 # to keep the hardware default for the particular disk.
4297 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4298 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4299
4300 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4301 # Separate values for multiple disks with spaces. Use the special value 'keep'
4302 # to keep the kernel default scheduler for the particular disk.
4303 #DISK_IOSCHED="cfq cfq"
4304
4305 # AHCI link power management (ALPM) for disk devices:
4306 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4307 # (*) Kernel >= 4.15 required, then recommended.
4308 # Multiple values separated with spaces are tried sequentially until success.
4309 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4310 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4311
4312 # Exclude host devices from AHCI link power management.
4313 # Separate multiple hosts with spaces.
4314 #SATA_LINKPWR_BLACKLIST="host1"
4315
4316 # Runtime Power Management for AHCI host and disks devices:
4317 # on=disable, auto=enable.
4318 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4319 #AHCI_RUNTIME_PM_ON_AC=on
4320 #AHCI_RUNTIME_PM_ON_BAT=on
4321
4322 # Seconds of inactivity before disk is suspended.
4323 AHCI_RUNTIME_PM_TIMEOUT=15
4324
4325 # PCI Express Active State Power Management (PCIe ASPM):
4326 # default, performance, powersave.
4327 PCIE_ASPM_ON_AC=performance
4328 PCIE_ASPM_ON_BAT=powersave
4329
4330 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4331 # auto = mid on BAT, high on AC; default = use hardware defaults.
4332 RADEON_POWER_PROFILE_ON_AC=high
4333 RADEON_POWER_PROFILE_ON_BAT=low
4334
4335 # Radeon dynamic power management method (DPM): battery, performance.
4336 RADEON_DPM_STATE_ON_AC=performance
4337 RADEON_DPM_STATE_ON_BAT=battery
4338
4339 # Radeon DPM performance level: auto, low, high; auto is recommended.
4340 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4341 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4342
4343 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4344 WIFI_PWR_ON_AC=off
4345 WIFI_PWR_ON_BAT=on
4346
4347 # Disable wake on LAN: Y/N.
4348 WOL_DISABLE=Y
4349
4350 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4351 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4352 SOUND_POWER_SAVE_ON_AC=0
4353 SOUND_POWER_SAVE_ON_BAT=0
4354
4355 # Disable controller too (HDA only): Y/N.
4356 SOUND_POWER_SAVE_CONTROLLER=N
4357
4358 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4359 # Drive can be powered on again by releasing (and reinserting) the eject lever
4360 # or by pressing the disc eject button on newer models.
4361 # Note: an UltraBay/MediaBay hard disk is never powered off.
4362 BAY_POWEROFF_ON_AC=0
4363 BAY_POWEROFF_ON_BAT=0
4364 # Optical drive device to power off (default sr0).
4365 BAY_DEVICE="sr0"
4366
4367 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4368 RUNTIME_PM_ON_AC=on
4369 RUNTIME_PM_ON_BAT=auto
4370
4371 # Exclude PCI(e) device adresses the following list from Runtime PM
4372 # (separate with spaces). Use lspci to get the adresses (1st column).
4373 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4374
4375 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4376 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4377 # prevents accidential power-on of dGPU in hybrid graphics setups.
4378 # Use "" to disable the feature completely.
4379 # Separate multiple drivers with spaces.
4380 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4381
4382 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4383 USB_AUTOSUSPEND=1
4384
4385 # Exclude listed devices from USB autosuspend (separate with spaces).
4386 # Use lsusb to get the ids.
4387 # Note: input devices (usbhid) are excluded automatically
4388 #USB_BLACKLIST="1111:2222 3333:4444"
4389
4390 # Bluetooth devices are excluded from USB autosuspend:
4391 # 0=do not exclude, 1=exclude.
4392 USB_BLACKLIST_BTUSB=0
4393
4394 # Phone devices are excluded from USB autosuspend:
4395 # 0=do not exclude, 1=exclude (enable charging).
4396 USB_BLACKLIST_PHONE=0
4397
4398 # Printers are excluded from USB autosuspend:
4399 # 0=do not exclude, 1=exclude.
4400 USB_BLACKLIST_PRINTER=1
4401
4402 # WWAN devices are excluded from USB autosuspend:
4403 # 0=do not exclude, 1=exclude.
4404 USB_BLACKLIST_WWAN=1
4405
4406 # Include listed devices into USB autosuspend even if already excluded
4407 # by the blacklists above (separate with spaces).
4408 # Use lsusb to get the ids.
4409 #USB_WHITELIST="1111:2222 3333:4444"
4410
4411 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4412 # (workaround for USB devices that cause shutdown problems).
4413 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4414
4415 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4416 # on system startup: 0=disable, 1=enable.
4417 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4418 # are ignored when this is enabled!
4419 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4420 RESTORE_DEVICE_STATE_ON_STARTUP=0
4421
4422 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4423 # Separate multiple devices with spaces.
4424 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4425 DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
4426
4427 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4428 # Separate multiple devices with spaces.
4429 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4430
4431 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4432 # (workaround for devices that are blocking shutdown).
4433 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4434
4435 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4436 # (to prevent other operating systems from missing radios).
4437 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4438
4439 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4440 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4441
4442 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4443 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4444
4445 # Radio devices to disable on battery when not in use (not connected):
4446 # bluetooth, wifi, wwan.
4447 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4448
4449 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4450 # required). Charging starts when the remaining capacity falls below the
4451 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4452 # Main / Internal battery (values in %)
4453 #START_CHARGE_THRESH_BAT0=75
4454 #STOP_CHARGE_THRESH_BAT0=80
4455 # Ultrabay / Slice / Replaceable battery (values in %)
4456 #START_CHARGE_THRESH_BAT1=75
4457 #STOP_CHARGE_THRESH_BAT1=80
4458
4459 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4460 #RESTORE_THRESHOLDS_ON_BAT=1
4461
4462 # ------------------------------------------------------------------------------
4463 # tlp-rdw - Parameters for the radio device wizard
4464 # Possible devices: bluetooth, wifi, wwan.
4465
4466 # Hints:
4467 # - Parameters are disabled by default, remove the leading # to enable them
4468 # - Separate multiple radio devices with spaces
4469
4470 # Radio devices to disable on connect.
4471 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4472 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4473 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4474
4475 # Radio devices to enable on disconnect.
4476 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4477 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4478 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4479
4480 # Radio devices to enable/disable when docked.
4481 #DEVICES_TO_ENABLE_ON_DOCK=""
4482 #DEVICES_TO_DISABLE_ON_DOCK=""
4483
4484 # Radio devices to enable/disable when undocked.
4485 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4486 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4487 #+end_src
4488
4489 *** shemshak
4490
4491 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
4492 # ------------------------------------------------------------------------------
4493 # tlp - Parameters for power saving
4494 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4495
4496 # Hint: some features are disabled by default, remove the leading # to enable
4497 # them.
4498
4499 # Set to 0 to disable, 1 to enable TLP.
4500 TLP_ENABLE=1
4501
4502 # Operation mode when no power supply can be detected: AC, BAT.
4503 # Concerns some desktop and embedded hardware only.
4504 TLP_DEFAULT_MODE=AC
4505
4506 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4507 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4508 TLP_PERSISTENT_DEFAULT=0
4509
4510 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4511 # Non-zero value enables, zero disables laptop mode.
4512 DISK_IDLE_SECS_ON_AC=0
4513 DISK_IDLE_SECS_ON_BAT=2
4514
4515 # Dirty page values (timeouts in secs).
4516 MAX_LOST_WORK_SECS_ON_AC=15
4517 MAX_LOST_WORK_SECS_ON_BAT=60
4518
4519 # Hint: CPU parameters below are disabled by default, remove the leading #
4520 # to enable them, otherwise kernel default values are used.
4521
4522 # Select a CPU frequency scaling governor.
4523 # Intel Core i processor with intel_pstate driver:
4524 # powersave(*), performance.
4525 # Older hardware with acpi-cpufreq driver:
4526 # ondemand(*), powersave, performance, conservative, schedutil.
4527 # (*) is recommended.
4528 # Hint: use tlp-stat -p to show the active driver and available governors.
4529 # Important:
4530 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
4531 # efficient for *almost all* workloads and therefore kernel and most
4532 # distributions have chosen them as defaults. If you still want to change,
4533 # you should know what you're doing! You *must* disable your distribution's
4534 # governor settings or conflicts will occur.
4535 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4536 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4537
4538 # Set the min/max frequency available for the scaling governor.
4539 # Possible values strongly depend on your CPU. For available frequencies see
4540 # the output of tlp-stat -p.
4541 #CPU_SCALING_MIN_FREQ_ON_AC=0
4542 #CPU_SCALING_MAX_FREQ_ON_AC=0
4543 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4544 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4545
4546 # Set energy performance hints (HWP) for Intel P-state governor:
4547 # performance, balance_performance, default, balance_power, power
4548 # Values are given in order of increasing power saving.
4549 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4550 CPU_HWP_ON_AC=balance_performance
4551 CPU_HWP_ON_BAT=balance_power
4552
4553 # Set Intel P-state performance: 0..100 (%).
4554 # Limit the max/min P-state to control the power dissipation of the CPU.
4555 # Values are stated as a percentage of the available performance.
4556 # Requires an Intel Core i processor with intel_pstate driver.
4557 #CPU_MIN_PERF_ON_AC=0
4558 #CPU_MAX_PERF_ON_AC=100
4559 #CPU_MIN_PERF_ON_BAT=0
4560 #CPU_MAX_PERF_ON_BAT=30
4561
4562 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4563 # Requires an Intel Core i processor.
4564 # Important:
4565 # - This may conflict with your distribution's governor settings
4566 # - A value of 1 does *not* activate boosting, it just allows it
4567 #CPU_BOOST_ON_AC=1
4568 #CPU_BOOST_ON_BAT=0
4569
4570 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4571 # 0=disable, 1=enable.
4572 SCHED_POWERSAVE_ON_AC=0
4573 SCHED_POWERSAVE_ON_BAT=1
4574
4575 # Kernel NMI Watchdog:
4576 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
4577 NMI_WATCHDOG=0
4578
4579 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4580 # Frequency voltage pairs are written to:
4581 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4582 # CAUTION: only use this, if you thoroughly understand what you are doing!
4583 #PHC_CONTROLS="F:V F:V F:V F:V"
4584
4585 # Set CPU performance versus energy savings policy:
4586 # performance, balance-performance, default, balance-power, power.
4587 # Values are given in order of increasing power saving.
4588 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4589 ENERGY_PERF_POLICY_ON_AC=performance
4590 ENERGY_PERF_POLICY_ON_BAT=balance-power
4591
4592 # Disk devices; separate multiple devices with spaces (default: sda).
4593 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4594 DISK_DEVICES="sda sdb"
4595
4596 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4597 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4598 # Separate values for multiple disks with spaces. Use the special value 'keep'
4599 # to keep the hardware default for the particular disk.
4600 DISK_APM_LEVEL_ON_AC="254 254"
4601 DISK_APM_LEVEL_ON_BAT="128 128"
4602
4603 # Hard disk spin down timeout:
4604 # 0: spin down disabled
4605 # 1..240: timeouts from 5s to 20min (in units of 5s)
4606 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4607 # See 'man hdparm' for details.
4608 # Separate values for multiple disks with spaces. Use the special value 'keep'
4609 # to keep the hardware default for the particular disk.
4610 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4611 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4612
4613 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4614 # Separate values for multiple disks with spaces. Use the special value 'keep'
4615 # to keep the kernel default scheduler for the particular disk.
4616 #DISK_IOSCHED="cfq cfq"
4617
4618 # AHCI link power management (ALPM) for disk devices:
4619 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4620 # (*) Kernel >= 4.15 required, then recommended.
4621 # Multiple values separated with spaces are tried sequentially until success.
4622 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4623 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4624
4625 # Exclude host devices from AHCI link power management.
4626 # Separate multiple hosts with spaces.
4627 #SATA_LINKPWR_BLACKLIST="host1"
4628
4629 # Runtime Power Management for AHCI host and disks devices:
4630 # on=disable, auto=enable.
4631 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4632 #AHCI_RUNTIME_PM_ON_AC=on
4633 #AHCI_RUNTIME_PM_ON_BAT=on
4634
4635 # Seconds of inactivity before disk is suspended.
4636 AHCI_RUNTIME_PM_TIMEOUT=15
4637
4638 # PCI Express Active State Power Management (PCIe ASPM):
4639 # default, performance, powersave.
4640 PCIE_ASPM_ON_AC=performance
4641 PCIE_ASPM_ON_BAT=powersave
4642
4643 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4644 # auto = mid on BAT, high on AC; default = use hardware defaults.
4645 RADEON_POWER_PROFILE_ON_AC=high
4646 RADEON_POWER_PROFILE_ON_BAT=low
4647
4648 # Radeon dynamic power management method (DPM): battery, performance.
4649 RADEON_DPM_STATE_ON_AC=performance
4650 RADEON_DPM_STATE_ON_BAT=battery
4651
4652 # Radeon DPM performance level: auto, low, high; auto is recommended.
4653 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4654 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4655
4656 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4657 WIFI_PWR_ON_AC=off
4658 WIFI_PWR_ON_BAT=on
4659
4660 # Disable wake on LAN: Y/N.
4661 WOL_DISABLE=Y
4662
4663 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4664 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4665 SOUND_POWER_SAVE_ON_AC=0
4666 SOUND_POWER_SAVE_ON_BAT=0
4667
4668 # Disable controller too (HDA only): Y/N.
4669 SOUND_POWER_SAVE_CONTROLLER=N
4670
4671 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4672 # Drive can be powered on again by releasing (and reinserting) the eject lever
4673 # or by pressing the disc eject button on newer models.
4674 # Note: an UltraBay/MediaBay hard disk is never powered off.
4675 BAY_POWEROFF_ON_AC=0
4676 BAY_POWEROFF_ON_BAT=0
4677 # Optical drive device to power off (default sr0).
4678 BAY_DEVICE="sr0"
4679
4680 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4681 RUNTIME_PM_ON_AC=on
4682 RUNTIME_PM_ON_BAT=auto
4683
4684 # Exclude PCI(e) device adresses the following list from Runtime PM
4685 # (separate with spaces). Use lspci to get the adresses (1st column).
4686 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4687 RUNTIME_PM_BLACKLIST="01:00.0"
4688
4689 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4690 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4691 # prevents accidential power-on of dGPU in hybrid graphics setups.
4692 # Use "" to disable the feature completely.
4693 # Separate multiple drivers with spaces.
4694 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4695
4696 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4697 USB_AUTOSUSPEND=1
4698
4699 # Exclude listed devices from USB autosuspend (separate with spaces).
4700 # Use lsusb to get the ids.
4701 # Note: input devices (usbhid) are excluded automatically
4702 #USB_BLACKLIST="1111:2222 3333:4444"
4703
4704 # Bluetooth devices are excluded from USB autosuspend:
4705 # 0=do not exclude, 1=exclude.
4706 USB_BLACKLIST_BTUSB=0
4707
4708 # Phone devices are excluded from USB autosuspend:
4709 # 0=do not exclude, 1=exclude (enable charging).
4710 USB_BLACKLIST_PHONE=0
4711
4712 # Printers are excluded from USB autosuspend:
4713 # 0=do not exclude, 1=exclude.
4714 USB_BLACKLIST_PRINTER=1
4715
4716 # WWAN devices are excluded from USB autosuspend:
4717 # 0=do not exclude, 1=exclude.
4718 USB_BLACKLIST_WWAN=1
4719
4720 # Include listed devices into USB autosuspend even if already excluded
4721 # by the blacklists above (separate with spaces).
4722 # Use lsusb to get the ids.
4723 #USB_WHITELIST="1111:2222 3333:4444"
4724
4725 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4726 # (workaround for USB devices that cause shutdown problems).
4727 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4728
4729 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4730 # on system startup: 0=disable, 1=enable.
4731 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4732 # are ignored when this is enabled!
4733 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4734 RESTORE_DEVICE_STATE_ON_STARTUP=1
4735
4736 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4737 # Separate multiple devices with spaces.
4738 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4739
4740 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4741 # Separate multiple devices with spaces.
4742 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4743
4744 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4745 # (workaround for devices that are blocking shutdown).
4746 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4747
4748 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4749 # (to prevent other operating systems from missing radios).
4750 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4751
4752 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4753 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4754
4755 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4756 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4757
4758 # Radio devices to disable on battery when not in use (not connected):
4759 # bluetooth, wifi, wwan.
4760 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4761
4762 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4763 # required). Charging starts when the remaining capacity falls below the
4764 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4765 # Main / Internal battery (values in %)
4766 #START_CHARGE_THRESH_BAT0=75
4767 #STOP_CHARGE_THRESH_BAT0=80
4768 # Ultrabay / Slice / Replaceable battery (values in %)
4769 #START_CHARGE_THRESH_BAT1=75
4770 #STOP_CHARGE_THRESH_BAT1=80
4771
4772 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4773 #RESTORE_THRESHOLDS_ON_BAT=1
4774
4775 # ------------------------------------------------------------------------------
4776 # tlp-rdw - Parameters for the radio device wizard
4777 # Possible devices: bluetooth, wifi, wwan.
4778
4779 # Hints:
4780 # - Parameters are disabled by default, remove the leading # to enable them
4781 # - Separate multiple radio devices with spaces
4782
4783 # Radio devices to disable on connect.
4784 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4785 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4786 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4787
4788 # Radio devices to enable on disconnect.
4789 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4790 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4791 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4792
4793 # Radio devices to enable/disable when docked.
4794 #DEVICES_TO_ENABLE_ON_DOCK=""
4795 #DEVICES_TO_DISABLE_ON_DOCK=""
4796
4797 # Radio devices to enable/disable when undocked.
4798 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4799 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4800 #+end_src
4801
4802 ** X
4803
4804 *** xprofile
4805 :PROPERTIES:
4806 :header-args+: :tangle ~/.xprofile
4807 :END:
4808
4809 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4810 contrary, it's automatically sourced by LightDM, my display manager of
4811 choice.
4812
4813 #+begin_src sh :tangle no
4814 xset -b # disable bell
4815 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4816
4817 # setxkbmap -option compose:ralt
4818
4819 setxkbmap -option ctrl:nocaps # turn capslock into control
4820 setxkbmap -option altwin:swap_alt_win # swap alt and super
4821
4822 if [ $(hostname) = "plasma" ]
4823 then
4824 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4825 fi
4826
4827 if [ $(hostname) = "enigma" ]
4828 then
4829 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4830 fi
4831
4832 light -Scrs "intel_backlight" 2
4833
4834 source $HOME/.zprofile
4835
4836 export _JAVA_AWT_WM_NONREPARENTING=1
4837 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4838
4839 if [ $(hostname) = "plasma" ]
4840 then
4841 unlock-def-gk.py &
4842 fi
4843
4844 bspwm &
4845 #+end_src
4846
4847 *** X resources
4848
4849 **** Xresources
4850 :PROPERTIES:
4851 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4852 :END:
4853
4854 #+begin_src conf-xdefaults
4855 #include ".Xresources.d/fonts"
4856 ! #include ".Xresources.d/colors"
4857 #include ".Xresources.d/emacs"
4858 #include ".Xresources.d/rxvt-unicode"
4859 #+end_src
4860
4861 **** Xresources.d
4862
4863 ***** fonts
4864 :PROPERTIES:
4865 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4866 :END:
4867
4868 #+begin_src conf-xdefaults
4869 Xft.lcdfilter: lcddefault
4870 Xft.antialias: true
4871 Xft.autohint: 0
4872 Xft.hinting: true
4873 Xft.hintstyle: hintslight
4874 ! Xft.hintstyle: hintfull
4875 Xft.rgba: rgb
4876 Xft.dpi: 96
4877 #+end_src
4878
4879 ***** colors
4880 :PROPERTIES:
4881 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4882 :END:
4883
4884 #+begin_src conf-xdefaults :tangle no
4885 #include "gruvbox-light.xresources"
4886 ! #include "gruvbox-dark.xresources"
4887 #include "gruvbox-urxvt256.xresources"
4888 #+end_src
4889
4890 #+begin_src conf-xdefaults :tangle no
4891 ! -----------------------------------------------------------------------------
4892 ! File: gruvbox-light.xresources
4893 ! Description: Retro groove colorscheme generalized
4894 ! Author: morhetz <morhetz@gmail.com>
4895 ! Source: https://github.com/morhetz/gruvbox-generalized
4896 ! Last Modified: 6 Sep 2014
4897 ! -----------------------------------------------------------------------------
4898
4899 ! hard contrast: *background: #f9f5d7
4900 *background: #fbf1c7
4901 ! soft contrast: *background: #f2e5bc
4902 *foreground: #3c3836
4903 ! Black + DarkGrey
4904 *color0: #fdf4c1
4905 *color8: #928374
4906 ! DarkRed + Red
4907 *color1: #cc241d
4908 *color9: #9d0006
4909 ! DarkGreen + Green
4910 *color2: #98971a
4911 *color10: #79740e
4912 ! DarkYellow + Yellow
4913 *color3: #d79921
4914 *color11: #b57614
4915 ! DarkBlue + Blue
4916 *color4: #458588
4917 *color12: #076678
4918 ! DarkMagenta + Magenta
4919 *color5: #b16286
4920 *color13: #8f3f71
4921 ! DarkCyan + Cyan
4922 *color6: #689d6a
4923 *color14: #427b58
4924 ! LightGrey + White
4925 *color7: #7c6f64
4926 *color15: #3c3836
4927 #+end_src
4928
4929 #+begin_src conf-xdefaults :tangle no
4930 ! -----------------------------------------------------------------------------
4931 ! File: gruvbox-dark.xresources
4932 ! Description: Retro groove colorscheme generalized
4933 ! Author: morhetz <morhetz@gmail.com>
4934 ! Source: https://github.com/morhetz/gruvbox-generalized
4935 ! Last Modified: 6 Sep 2014
4936 ! -----------------------------------------------------------------------------
4937
4938 ! hard contrast: *background: #1d2021
4939 *background: #282828
4940 ! soft contrast: *background: #32302f
4941 *foreground: #ebdbb2
4942 ! Black + DarkGrey
4943 *color0: #282828
4944 *color8: #928374
4945 ! DarkRed + Red
4946 *color1: #cc241d
4947 *color9: #fb4934
4948 ! DarkGreen + Green
4949 *color2: #98971a
4950 *color10: #b8bb26
4951 ! DarkYellow + Yellow
4952 *color3: #d79921
4953 *color11: #fabd2f
4954 ! DarkBlue + Blue
4955 *color4: #458588
4956 *color12: #83a598
4957 ! DarkMagenta + Magenta
4958 *color5: #b16286
4959 *color13: #d3869b
4960 ! DarkCyan + Cyan
4961 *color6: #689d6a
4962 *color14: #8ec07c
4963 ! LightGrey + White
4964 *color7: #a89984
4965 *color15: #ebdbb2
4966 #+end_src
4967
4968 #+begin_src conf-xdefaults :tangle no
4969 ! -----------------------------------------------------------------------------
4970 ! File: gruvbox-urxvt256.xresources
4971 ! Description: Retro groove colorscheme generalized
4972 ! Author: morhetz <morhetz@gmail.com>
4973 ! Source: https://github.com/morhetz/gruvbox-generalized
4974 ! Last Modified: 13 Dec 2013
4975 ! -----------------------------------------------------------------------------
4976
4977 URxvt.color24: #076678
4978 URxvt.color66: #427b58
4979 URxvt.color88: #9d0006
4980 URxvt.color96: #8f3f71
4981 URxvt.color100: #79740e
4982 URxvt.color108: #8ec07c
4983 URxvt.color109: #83a598
4984 URxvt.color130: #af3a03
4985 URxvt.color136: #b57614
4986 URxvt.color142: #b8bb26
4987 URxvt.color167: #fb4934
4988 URxvt.color175: #d3869b
4989 URxvt.color208: #fe8019
4990 URxvt.color214: #fabd2f
4991 URxvt.color223: #ebdbb2
4992 URxvt.color228: #f2e5bc
4993 URxvt.color229: #fbf1c7
4994 URxvt.color230: #f9f5d7
4995 URxvt.color234: #1d2021
4996 URxvt.color235: #282828
4997 URxvt.color236: #32302f
4998 URxvt.color237: #3c3836
4999 URxvt.color239: #504945
5000 URxvt.color241: #665c54
5001 URxvt.color243: #7c6f64
5002 URxvt.color244: #928374
5003 URxvt.color245: #928374
5004 URxvt.color246: #a89984
5005 URxvt.color248: #bdae93
5006 URxvt.color250: #d5c4a1
5007 #+end_src
5008
5009 ***** emacs
5010 :PROPERTIES:
5011 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
5012 :END:
5013
5014 #+begin_src conf-xdefaults
5015 Emacs.menuBar: off
5016 Emacs.toolBar: off
5017 Emacs.verticalScrollBars: off
5018 Emacs.cursorBlink: off
5019 Emacs.FontBackend: xft,x
5020 ! Emacs.font: Ubuntu Mono-12
5021 ! Emacs.font: Triplicate T4C-11
5022 ! Emacs.font: Ubuntu Mono-10.5
5023 ! Emacs.font: Ubuntu Mono-12
5024 ! Emacs.font: Iosevka-11
5025
5026 ! Emacs.font: Fira Mono:size=15
5027 ! Emacs.font: DejaVu Sans Mono:size=15
5028 ! Emacs.font: Inconsolata:size=17
5029 ! Emacs.font: Inconsolata:size=16
5030 ! Emacs.font: Inconsolata LGC:size=14
5031 ! Emacs.font: Source Code Pro Medium-10.5
5032 Emacs.font: Source Code Pro:size=14
5033 ! Emacs.font: Ubuntu Mono:size=16
5034 ! Emacs.font: Iosevka:size=16
5035 #+end_src
5036
5037 ***** rxvt-unicode
5038 :PROPERTIES:
5039 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
5040 :END:
5041
5042 #+begin_src conf-xdefaults
5043 ! Font
5044 URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
5045 URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
5046 URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
5047 URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
5048
5049 URxvt.xftAntialias: true
5050 URxvt.letterSpace: 0
5051
5052 URxvt.depth: 0
5053 URxvt.loginShell: true
5054 URxvt.saveLines: 100000
5055 URxvt.internalBorder: 3
5056 URxvt.lineSpace: 0
5057 URxvt.scrollBar: false
5058 URxvt.scrollStyle: rxvt
5059 URxvt*scrollTtyOutput: false
5060 URxvt*scrollWithBuffer: true
5061 URxvt*scrollTtyKeypress: true
5062 URxvt.keysym.Shift-Up: command:\033]720;1\007
5063 URxvt.keysym.Shift-Down: command:\033]721;1\007
5064
5065 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
5066 URxvt.url-select.launcher: firefox
5067 URxvt.url-select.underline: true
5068 URxvt.keysym.M-u: perl:url-select:select_next
5069 URxvt.keysym.M-Escape: perl:keyboard-select:activate
5070 URxvt.keysym.M-s: perl:keyboard-select:search
5071 URxvt.url-launcher: /usr/bin/firefox
5072 URxvt.matcher.button: 1
5073 URxvt.iso14755: false
5074 URxvt.iso14755_53: false
5075 URxvt.keysym.M-c: perl:clipboard:copy
5076 URxvt.keysym.M-v: perl:clipboard:paste
5077 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
5078 URxvt.keysym.C-Up: font-size:increase
5079 URxvt.keysym.C-Down: font-size:decrease
5080 URxvt.keysym.C-S-Up: font-size:incglobal
5081 URxvt.keysym.C-S-Down: font-size:decglobal
5082 URxvt.keysym.C-equal: font-size:reset
5083 !URxvt.keysym.C-question: font-size:show
5084
5085 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5086
5087 !urxvt*foreground: white
5088 !urxvt*background: black
5089
5090 !*color0: #2E3436
5091 !*color1: #a40000
5092 !*color2: #4E9A06
5093 !*color3: #C4A000
5094 !*color4: #3465A4
5095 !*color5: #75507B
5096 !*color6: #ce5c00
5097 !*color7: #babdb9
5098 !*color8: #555753
5099 !*color9: #EF2929
5100 !*color10: #8AE234
5101 !*color11: #FCE94F
5102 !*color12: #729FCF
5103 !*color13: #AD7FA8
5104 !*color14: #fcaf3e
5105 !*color15: #EEEEEC
5106
5107 !URxvt.foreground: #C8C8C8
5108 !URxvt.background: #FFFFFF
5109
5110 !! black
5111 !*color0: #2E3436
5112 !*color8: #555753
5113 !! red
5114 !*color1: #a40000
5115 !*color9: #EF2929
5116 !! green
5117 !*color2: #4E9A06
5118 !*color10: #8AE234
5119 !! yellow
5120 !*color3: #C4A000
5121 !*color11: #FCE94F
5122 !! blue
5123 !*color4: #3465A4
5124 !*color12: #729FCF
5125 !! purple
5126 !*color5: #75507B
5127 !*color13: #AD7FA8
5128 !! orange (replaces cyan)
5129 !*color6: #ce5c00
5130 !*color14: #fcaf3e
5131 !! white
5132 !*color7: #babdb9
5133 !*color15: #EEEEEC
5134
5135 ! Tango colour theme for rxvt-unicode
5136 URxvt.background: #FFFFFF
5137 URxvt.foreground: #000000
5138
5139 ! Black
5140 URxvt.color0: #2E3436
5141 URxvt.color8: #757773
5142
5143 ! Red
5144 URxvt.color1: #CC0000
5145 URxvt.color9: #EF2929
5146
5147 ! Green
5148 URxvt.color2: #4E9A06
5149 URxvt.color10: #8AE234
5150
5151 ! Yellow
5152 URxvt.color3: #C4A000
5153 URxvt.color11: #FCE94F
5154
5155 ! Blue
5156 URxvt.color4: #3465A4
5157 URxvt.color12: #729FCF
5158
5159 ! Magenta
5160 URxvt.color5: #75507B
5161 URxvt.color13: #AD7FA8
5162
5163 !! Cyan
5164 !URxvt.color6: #06989A
5165 !URxvt.color14: #34E2E2
5166 ! orange (replaces cyan)
5167 ,*color6: #ce5c00
5168 ,*color14: #fcaf3e
5169
5170 ! White
5171 URxvt.color7: #D3D7CF
5172 URxvt.color15: #EEEEEC
5173 #+end_src
5174
5175 *** xkb us_ab keyboard layout
5176
5177 #+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5178 default partial alphanumeric_keys
5179 xkb_symbols "us_ab" {
5180 include "us(basic)"
5181 name[Group1]= "English (US)(aminb)";
5182
5183 key <MENU> { [ Alt_R ] };
5184 };
5185 #+end_src
5186
5187 ** XDG
5188 :PROPERTIES:
5189 :header-args+: :tangle ~/.config/user-dirs.dirs
5190 :END:
5191
5192 #+begin_src conf
5193 XDG_DESKTOP_DIR="$HOME/Desktop"
5194 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5195 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5196 XDG_MUSIC_DIR="$HOME/usr/music"
5197 XDG_PICTURES_DIR="$HOME/usr/pics"
5198 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5199 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5200 XDG_VIDEOS_DIR="$HOME/usr/vids"
5201 #+end_src
5202
5203 ** Zathura
5204 :PROPERTIES:
5205 :header-args+: :tangle ~/.config/zathura/zathurarc
5206 :END:
5207
5208 #+begin_src conf
5209 set smooth-scroll true
5210 set selection-clipboard clipboard
5211 set zoom-step 05
5212 set default-bg "#272727"
5213 set statusbar-bg "#272727"
5214 set inputbar-bg "#373737"
5215 #+end_src
5216
5217 ** Zsh
5218
5219 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5220 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5221 installed.
5222
5223 *** zimrc
5224 :PROPERTIES:
5225 :header-args+: :tangle ~/.zimrc
5226 :END:
5227
5228 #+begin_src sh
5229
5230
5231 #################
5232 # CORE SETTINGS #
5233 #################
5234
5235 #
5236 # Zim settings
5237 #
5238
5239 # Select what modules you would like enabled.
5240 # The second line of modules may depend on options set by modules in the first
5241 # line. These dependencies are noted on the respective module's README.md.
5242 zmodules=(directory environment git git-info history input ssh utility custom \
5243 syntax-highlighting history-substring-search prompt completion)
5244
5245
5246 ###################
5247 # MODULE SETTINGS #
5248 ###################
5249
5250 #
5251 # Prompt
5252 #
5253
5254 # Set your desired prompt here
5255 zprompt_theme='pure'
5256 #PURE_PROMPT_SYMBOL=λ
5257 #PURE_PROMPT_SYMBOL=δ
5258 PURE_PROMPT_SYMBOL=➜
5259
5260 #
5261 # Completion
5262 #
5263
5264 # set an optional host-specific filename for the completion cache file
5265 # if none is provided, the default '.zcompdump' is used.
5266 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5267
5268 #
5269 # Utility
5270 #
5271
5272 # Uncomment to enable command correction prompts
5273 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5274 setopt CORRECT
5275
5276 #
5277 # Environment
5278 #
5279
5280 # Set the string below to the desired terminal title format string.
5281 # The terminal title is redrawn upon directory change, however, variables like
5282 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5283 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5284 # The example below uses the following format: 'username@host:/current/directory'
5285 ztermtitle='%n@%m:%~'
5286
5287 #
5288 # Input
5289 #
5290
5291 # Uncomment to enable double-dot expansion.
5292 # This appends '../' to your input for each '.' you type after an initial '..'
5293 #zdouble_dot_expand='true'
5294
5295 #
5296 # Syntax-Highlighting
5297 #
5298
5299 # This determines what highlighters will be used with the syntax-highlighting module.
5300 # Documentation of the highlighters can be found here:
5301 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5302 # For (u)rxvt, termite and gnome-terminal users,
5303 # removing the 'cursor' highlighter will fix the disappearing cursor problem
5304 #zhighlighters=(main brackets cursor)
5305 zhighlighters=(main brackets pattern)
5306
5307
5308 #
5309 # SSH
5310 #
5311
5312 # Load these ssh identities with the ssh module
5313 zssh_ids=(id_ed25519_bandali)
5314
5315
5316 #
5317 # Pacman
5318 #
5319
5320 # Set (optional) pacman front-end.
5321 zpacman_frontend='yay'
5322
5323 # Load any helper scripts as defined here
5324 #zpacman_helper=(aur)
5325 #+end_src
5326
5327 *** zlogin
5328 :PROPERTIES:
5329 :header-args+: :tangle ~/.zlogin
5330 :END:
5331
5332 #+begin_src sh
5333
5334
5335 #
5336 # User configuration sourced by login shells
5337 #
5338
5339 # Initialize zim
5340 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5341 #+end_src
5342
5343 *** zprofile
5344 :PROPERTIES:
5345 :header-args+: :tangle ~/.zprofile
5346 :END:
5347
5348 #+begin_src sh
5349 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5350 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
5351 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
5352 export XDG_CONFIG_HOME=$HOME/.config
5353 export XDG_DATA_HOME=$HOME/.local/share
5354 export XDG_DATA_DIRS=/usr/local/share:/usr/share
5355 export MAILDIR="$HOME/mail"
5356 export CVS_RSH=ssh
5357 #export MATHMODELS=$HOME/src/eiffel/mathmodels
5358 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5359 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5360
5361 # Eiffel2Java stuff
5362 #export JAVA_HOME=/usr/lib/jvm/default
5363 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5364 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5365 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5366
5367 #export PATH="$HOME/usr/build/pvs:$PATH"
5368 #export SBCLISP_HOME=/usr/share/sbcl-source
5369 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5370
5371 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
5372
5373 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5374 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5375
5376 export NIXPKGS=$HOME/src/git/nixpkgs
5377
5378 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
5379 #+end_src
5380
5381 *** zshenv
5382 :PROPERTIES:
5383 :header-args+: :tangle ~/.zshenv
5384 :END:
5385
5386 #+begin_src sh
5387 # Ensure that a non-login, non-interactive shell has a defined environment.
5388 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5389 source "${ZDOTDIR:-$HOME}/.zprofile"
5390 fi
5391 #+end_src
5392
5393 *** zshrc
5394 :PROPERTIES:
5395 :header-args+: :tangle ~/.zshrc
5396 :END:
5397
5398 #+begin_src sh
5399 # Bash-like navigation
5400 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5401 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5402 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5403 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
5404
5405 #disable -r time # disable shell reserved word
5406 #alias time='time -p' # -p for POSIX output
5407
5408 # rehash if last command was pacaur or pacman
5409 # (so that zsh picks up changes in $PATH immediately)
5410 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5411
5412 #
5413 # User configuration sourced by interactive shells
5414 #
5415
5416 # Change default zim location
5417 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5418
5419 # Start zim
5420 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5421
5422 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5423 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5424
5425 setopt globdots
5426
5427 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
5428 # source ~/.zsh/zsh-autopair/autopair.zsh
5429
5430
5431 ### fzf ###
5432
5433 source /usr/share/fzf/key-bindings.zsh
5434 source /usr/share/fzf/completion.zsh
5435
5436 # Accept history selection instead of putting it on
5437 # the command line
5438 fzf-history-widget-accept() {
5439 fzf-history-widget
5440 zle accept-line
5441 }
5442 #zle -N fzf-history-widget-accept
5443 #bindkey '^R' fzf-history-widget-accept
5444
5445 # alt+c preview
5446 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5447
5448 ### fzf ###
5449
5450
5451 # aliases
5452 alias mpv="mpv --ytdl-format mp4"
5453 alias mv="mv -iv"
5454 alias cp="cp -iv"
5455 alias scl=systemctl
5456 alias jcl=journalctl
5457 alias m="mbsync uwaterloo; mbsync amin"
5458 alias best="youtube-dl -f best"
5459 alias sd="ssh deb"
5460 alias sf="ssh fp"
5461 alias sn="ssh nix"
5462
5463 aur() {
5464 cd ~/usr/build
5465 git clone https://aur.archlinux.org/${1}.git
5466 cd ${1}
5467 }
5468
5469 # i-beam cursor
5470 echo -e "\033[5 q"
5471 #echo -e "\033[6 q"
5472 #+end_src
5473
5474 * Scripts
5475
5476 This section contains various useful scripts and the ones used by the
5477 programs above. For instance, =toggle-tablet= for switching to and
5478 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5479 Xfce's presentation mode which keeps the screen awake, and
5480 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5481 exact brightness value.
5482
5483 ** battery-percentage-time
5484 :PROPERTIES:
5485 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
5486 :END:
5487
5488 #+begin_src sh :tangle no
5489 dbus_send() {
5490 label=$1
5491 dbus-send --print-reply=literal --system \
5492 --dest=org.freedesktop.UPower \
5493 /org/freedesktop/UPower/devices/battery_BAT0 \
5494 org.freedesktop.DBus.Properties.Get \
5495 string:org.freedesktop.UPower.Device \
5496 string:"${label}" | awk '{print $3}'
5497 }
5498
5499 perc=$(dbus_send 'Percentage')
5500 state=$(dbus_send 'State')
5501
5502 if [ "$state" -eq 2 ]; then # Discharging
5503 secs=$(dbus_send 'TimeToEmpty')
5504 elif [ "$state" -eq 1 ]; then # Charging
5505 secs=$(dbus_send 'TimeToFull')
5506 fi
5507
5508 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5509 #+end_src
5510
5511 ** my-i3status.py
5512 :PROPERTIES:
5513 :header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
5514 :END:
5515
5516 #+begin_src python :comments none
5517 # -*- coding: utf-8 -*-
5518
5519 # This script is a simple wrapper which prefixes each i3status line with custom
5520 # information. It is based on:
5521 # https://github.com/i3/i3status/blob/master/contrib/wrapper.py
5522 #
5523 # In ~/.i3status.conf, add the following line:
5524 # output_format = "i3bar"
5525 # in the 'general' section.
5526 # Then, in ~/.config/i3/config or ~/.config/sway/config add:
5527 # status_command i3status | my-i3status.py
5528 # in the 'bar' section. Make sure my-i3status.py is in $PATH.
5529 #
5530 # © 2012 Valentin Haenel <valentin.haenel@gmx.de>
5531 # © 2018 Amin Bandali <bandali@gnu.org>
5532 #
5533 # This program is free software. It comes without any warranty, to the extent
5534 # permitted by applicable law. You can redistribute it and/or modify it under
5535 # the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
5536 # 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
5537 # details.
5538
5539 import sys
5540 import json
5541 import os
5542
5543 def get_nosleep():
5544 """ Return true if ~/.nosleep exists. """
5545 return os.path.isfile(os.path.expanduser("~/.nosleep"))
5546
5547 def print_line(message):
5548 """ Non-buffered printing to stdout. """
5549 sys.stdout.write(message + '\n')
5550 sys.stdout.flush()
5551
5552 def read_line():
5553 """ Interrupted respecting reader for stdin. """
5554 # try reading a line, removing any extra whitespace
5555 try:
5556 line = sys.stdin.readline().strip()
5557 # i3status sends EOF, or an empty line
5558 if not line:
5559 sys.exit(3)
5560 return line
5561 # exit on ctrl-c
5562 except KeyboardInterrupt:
5563 sys.exit()
5564
5565 if __name__ == '__main__':
5566 # Skip the first line which contains the version header.
5567 print_line(read_line())
5568
5569 # The second line contains the start of the infinite array.
5570 print_line(read_line())
5571
5572 while True:
5573 line, prefix = read_line(), ''
5574 # ignore comma at start of lines
5575 if line.startswith(','):
5576 line, prefix = line[1:], ','
5577
5578 if get_nosleep():
5579 j = json.loads(line)
5580 # insert information into the start of the json, but could be anywhere
5581 j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
5582 # and echo back new encoded json
5583 print_line(prefix+json.dumps(j))
5584 else:
5585 print_line(prefix+line)
5586 #+end_src
5587
5588 ** rofi-light
5589 :PROPERTIES:
5590 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5591 :END:
5592
5593 #+begin_src bash
5594 cur=$(light -G)
5595 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
5596 [ -n "$val" ] && light -S $val
5597 #+end_src
5598
5599 ** rofi-remmina.py
5600 :PROPERTIES:
5601 :header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
5602 :END:
5603
5604 #+begin_src python
5605 import ConfigParser
5606 import os
5607 from subprocess import Popen, PIPE
5608
5609 remmina_dir = os.path.expanduser("~/.local/share/remmina")
5610
5611 fdict = dict()
5612
5613 for f in os.listdir(remmina_dir):
5614 fp = os.path.join(remmina_dir, f)
5615 c = ConfigParser.ConfigParser()
5616 c.read(fp)
5617 n = c.get('remmina', 'name')
5618 fdict[n] = fp
5619
5620 lines = max(min(15, len(fdict)), 1);
5621 width = len(max(fdict.keys(), key=len))
5622 rofi = Popen(["rofi", "-i", "-dmenu", \
5623 "-l", str(lines), "-width", str(width), \
5624 "-p", "connection"], stdout=PIPE, stdin=PIPE)
5625 selected = rofi.communicate("\n" \
5626 .join(fdict.keys()) \
5627 .encode("utf-8"))[0] \
5628 .decode("utf-8") \
5629 .strip()
5630 rofi.wait()
5631
5632 r = Popen(["remmina", "-c", fdict[selected]])
5633 r.wait()
5634 #+end_src
5635
5636 ** s (run sway)
5637 :PROPERTIES:
5638 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5639 :END:
5640
5641 #+begin_src bash
5642 export _JAVA_AWT_WM_NONREPARENTING=1
5643 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5644 light -Nr 2
5645 source $HOME/.zprofile
5646 sway
5647 #+end_src
5648
5649 ** sway-ws-util
5650 :PROPERTIES:
5651 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5652 :END:
5653
5654 #+begin_src bash
5655 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5656 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5657 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5658 dest_ws=-1
5659 op=-1
5660
5661 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5662 op="$1"
5663 if [ "$2" = "prev" ]; then
5664 dest_ws="$prev_ws"
5665 elif [ "$2" = "next" ]; then
5666 dest_ws="$next_ws"
5667 else
5668 echo "Usage: $0 $1 {prev|next} [follow]"
5669 exit 1
5670 fi
5671 else
5672 echo "Usage: $0 {switch|move} {prev|next} [follow]"
5673 exit 1
5674 fi
5675
5676 if [ "$op" = "switch" ]; then
5677 sway workspace "$dest_ws"
5678 elif [ "$op" = "move" ]; then
5679 sway move container to workspace "$dest_ws"
5680 if [ "$3" = "follow" ]; then
5681 sway workspace "$dest_ws"
5682 fi
5683 fi
5684 #+end_src
5685
5686 ** toggle-layout
5687 :PROPERTIES:
5688 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5689 :END:
5690
5691 #+begin_src bash :tangle no
5692 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5693
5694 if [ "$lang" = "us" ]; then
5695 setxkbmap ir
5696 else
5697 setxkbmap us
5698 # xmodmap $HOME/.Xmodmap
5699 fi
5700 #+end_src
5701
5702 ** toggle-presentation-mode
5703 :PROPERTIES:
5704 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5705 :END:
5706
5707 #+begin_src bash :tangle no
5708 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5709 #+end_src
5710
5711 ** toggle-tablet
5712 :PROPERTIES:
5713 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5714 :END:
5715
5716 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5717 a few things:
5718
5719 - rotates the screen using =xrandr=, so that rotating the physical
5720 display of my X220t would have the laptop's battery on the right
5721 hand side,
5722 - enables touch screen,
5723 - properly rotates the stylus pen and touch screen pointers, and
5724 - toggles between RGB and Vertical BGR sub-pixel order.
5725
5726 #+begin_src bash :tangle no
5727 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5728 0) # Screen is not rotated, we should rotate it right (90°)
5729 xrandr -o 3
5730 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5731 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5732 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5733 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5734 ;;
5735 1) # Currently top is rotated right, we should set it normal (0°)
5736 xrandr -o 0
5737 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5738 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5739 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5740 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5741 ;;
5742 *)
5743 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5744 exit 1
5745 ;;
5746 esac
5747 #+end_src
5748
5749 ** unlock-def-gk.py
5750 :PROPERTIES:
5751 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5752 :END:
5753
5754 #+begin_src python :tangle no
5755 import gnomekeyring as gk
5756 # list_item_ids_sync('login')[0] == 1L
5757 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5758 #+end_src
5759
5760 ** volume-info
5761 :PROPERTIES:
5762 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5763 :END:
5764
5765 #+begin_src sh :tangle no
5766 cur_vol=$(pamixer --get-volume)
5767
5768 if [ $(pamixer --get-mute) = true ]; then
5769 printf 'mt \n' "$cur_vol"
5770 else
5771 printf '%02d \n' "$cur_vol"
5772 fi
5773 #+end_src
5774
5775 ** wp
5776
5777 My little wallpaper changer script.
5778
5779 *** wp
5780 :PROPERTIES:
5781 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5782 :END:
5783
5784 #+begin_src bash :tangle no
5785 export DISPLAY=:0
5786
5787 case "$1" in
5788 "day")
5789 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5790 ;;
5791 "night")
5792 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5793 ;;
5794 *)
5795 echo $"Usage: $0 {day|night}"
5796 exit 1
5797 esac
5798 #+end_src
5799
5800 *** wp-auto
5801 :PROPERTIES:
5802 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5803 :END:
5804
5805 #+begin_src bash :tangle no
5806 SED=$(which sed)
5807 ROFI=$(which rofi)
5808
5809 export DISPLAY=:0
5810 HOUR=$(date +%H)
5811
5812 if [ -z "${SED}" ]
5813 then
5814 echo "Did not find 'sed', script cannot continue."
5815 exit 1
5816 fi
5817 if [ -z "${ROFI}" ]
5818 then
5819 echo "Did not find rofi, there is no point to continue."
5820 exit 1
5821 fi
5822
5823 ###
5824 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5825 # Repeated calls should leave the config clean-ish
5826 ###
5827 function set_theme()
5828 {
5829 CDIR="${HOME}/.config/rofi/"
5830 if [ ! -d "${CDIR}" ]
5831 then
5832 mkdir -p ${CDIR}
5833 fi
5834 if [ -f "${CDIR}/config" ]
5835 then
5836 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5837 fi
5838 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5839
5840 }
5841
5842 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5843 then
5844 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5845 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5846 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5847 else
5848 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5849 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5850 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5851 fi
5852 #+end_src
5853
5854 *** wp.service
5855 :PROPERTIES:
5856 :header-args+: :tangle ~/.config/systemd/user/wp.service
5857 :END:
5858
5859 #+begin_src conf :tangle no
5860 [Unit]
5861 Description=wallpaper service
5862
5863 [Service]
5864 Type=oneshot
5865 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5866 #+end_src
5867
5868 *** wp.timer
5869 :PROPERTIES:
5870 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5871 :END:
5872
5873 #+begin_src conf :tangle no
5874 [Unit]
5875 [Unit]
5876 Description=wallpaper timer
5877
5878 [Timer]
5879 OnCalendar=07,21:00
5880 Unit=wp.service
5881 Persistent=true
5882
5883 [Install]
5884 WantedBy=timers.target
5885 #+end_src
5886
5887 ** zathura-sync.sh
5888 :PROPERTIES:
5889 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5890 :END:
5891
5892 #+begin_src sh
5893 pos="$1"
5894 pdffile="$2"
5895 zathura --synctex-forward "$pos" "$pdffile" || \
5896 (
5897 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5898 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5899 #+end_src
5900 ** Fun :)
5901
5902 *** eat-em
5903 :PROPERTIES:
5904 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5905 :END:
5906
5907 #+begin_src sh
5908 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5909 # [ESC] character in original post removed here.
5910
5911 # ANSI Color -- use these variables to easily have different color
5912 # and format output. Make sure to output the reset sequence after
5913 # colors (f = foreground, b = background), and use the 'off'
5914 # feature for anything you turn on.
5915
5916 initializeANSI()
5917 {
5918 esc="$(echo -en '\e')"
5919
5920 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5921 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5922 cyanf="${esc}[36m"; whitef="${esc}[37m"
5923
5924 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5925 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5926 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5927
5928 boldon="${esc}[1m"; boldoff="${esc}[22m"
5929 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5930 ulon="${esc}[4m"; uloff="${esc}[24m"
5931 invon="${esc}[7m"; invoff="${esc}[27m"
5932
5933 reset="${esc}[0m"
5934 }
5935
5936 # note in this first use that switching colors doesn't require a reset
5937 # first - the new color overrides the old one.
5938
5939 #clear
5940
5941 initializeANSI
5942
5943 cat << EOF
5944
5945 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5946 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5947 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5948 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5949 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5950 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5951
5952 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5953 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5954 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5955 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5956 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5957 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5958
5959 EOF
5960 #+end_src
5961
5962 *** invade-em
5963 :PROPERTIES:
5964 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5965 :END:
5966
5967 #+begin_src bash
5968 #
5969 # ANSI color scheme script featuring Space Invaders
5970 #
5971 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5972 # Modified by lolilolicon
5973 #
5974
5975 f=3 b=4
5976 for j in f b; do
5977 for i in {0..7}; do
5978 printf -v $j$i %b "\e[${!j}${i}m"
5979 done
5980 done
5981 bld=$'\e[1m'
5982 rst=$'\e[0m'
5983
5984 cat << EOF
5985
5986 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5987 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5988 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5989 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5990
5991 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5992 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5993 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5994 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5995
5996
5997 $f7▌$rst
5998
5999 $f7▌$rst
6000
6001 $f7 ▄█▄ $rst
6002 $f7▄█████████▄$rst
6003 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
6004
6005 EOF
6006 #+end_src