git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh :tangle no
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf :tangle no
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf :tangle no
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** Dunst
 393 :PROPERTIES:
 394 :header-args+: :tangle ~/.config/dunst/dunstrc
 395 :END:
 396
 397 #+begin_src conf
 398 [global]
 399 #font = Ubuntu Mono 10.5
 400 font = Inconsolata 11
 401
 402 # Path to default icons.
 403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 404
 405 icon_position = left
 406 # <b>bold</b>
 407 # <i>italic</i>
 408 # <s>strikethrough<s/>
 409 # <u>underline</u>
 410 markup = full
 411 # The format of the message. Possible variables are:
 412 #   %a  appname
 413 #   %s  summary
 414 #   %b  body
 415 #   %i  iconname (including its path)
 416 #   %I  iconname (without its path)
 417 #   %p  progress value if set ([  0%] to [100%]) or nothing
 418 # Markup is allowed
 419 format = "<b>%s</b>\n%b"
 420 # Sort messages by urgency
 421 sort = yes
 422 # Show how many messages are currently hidden (because of geometry)
 423 indicate_hiddenl= no
 424 # Alignment of message text.
 425 # Possible values are "left", "center" and "right"
 426 alignment = center
 427 # The frequency with wich text that is longer than the notification
 428 # window allows bounces back and forth.
 429 # This option conflicts with 'word_wrap'.
 430 # Set to 0 to disable
 431 bounce_freq = 3
 432 # show age of message if message is older than show_age_threshold seconds.
 433 # set to -1 to disable
 434 show_age_threshold = -1
 435 # split notifications into multiple lines if they don't fit into geometry
 436 word_wrap = yes
 437 # ignore newlines '\n' in notifications
 438 ignore_newline = no
 439 # The geometry of the message window.
 440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 441 # The height is measured in number of notifications everything else in pixels. If the width
 442 # is omitted but the height is given ("-geometry x2"), the message window
 443 # expands over the whole screen (dmenu-like). If width is 0,
 444 # the window expands to the longest message displayed.
 445 # A positive x is measured from the left, a negative from the
 446 # right side of the screen.  Y is measured from the top and down respectevly.
 447 # The width can be negative. In this case the actual width is the
 448 # screen width minus the width defined in within the geometry option.
 449 #geometry = "410x12-12+12"
 450 #geometry = "0x0-30-30"
 451 geometry = "260x12-30-30"
 452 # The transparency of the window. range: [0; 100]
 453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 454 transparency = 0
 455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 456 # for longer than idle_threshold seconds.
 457 # Set to 0 to disable.
 458 idle_threshold = 120
 459 # Which monitor should the notifications be displayed on.
 460 monitor = 0
 461 # Display notification on focused monitor. Possible modes are:
 462 # mouse: follow mouse pointer
 463 # keyboard: follow window with keyboard focus
 464 # none: don't follow anything
 465 #
 466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 467 # This should be the case for almost all modern windowmanagers.
 468 #
 469 # If this option is set to mouse or keyboard, the monitor option will be
 470 # ignored.
 471 follow = keyboard
 472 # should a notification popped up from history be sticky or
 473 # timeout as if it would normally do.
 474 sticky_history = yes
 475 # The height of a single line. If the height is smaller than the font height,
 476 # it will get raised to the font height.
 477 # This adds empty space above and under the text.
 478 line_height = 0
 479
 480 show_indicators = yes
 481
 482 # Draw a line of 'separatpr_height' pixel height between two notifications.
 483 # Set to 0 to disable
 484 separator_height = 3
 485 # padding between text and separator
 486 padding = 8
 487 # horizontal padding
 488 horizontal_padding = 8
 489 # Define a color for the separator.
 490 # possible values are:
 491 #  * auto: dunst tries to find a color fitting to the background
 492 #  * foreground: use the same color as the foreground
 493 #  * frame: use the same color as the frame.
 494 #  * anything else will be interpreted as a X color
 495 separator_color = foreground
 496 # print a notification on startup
 497 # This is mainly for error detection, since dbus (re-)starts dunst
 498 # automatically after a crash.
 499 startup_notification = false
 500 # dmenu path
 501 #dmenu = /usr/bin/dmenu -p dunst:
 502 dmenu = /usr/bin/rofi -dmenu -p dunst:
 503 # browser for opening urls in context menu
 504 browser = /usr/bin/firefox -new-tab
 505 [frame]
 506 width = 0
 507 color = "#377222"
 508 [shortcuts]
 509 # shortcuts are specified as [modifier+][modifier+]...key
 510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 511 # and 'mod4' (windows-key)
 512 # xev might be helpful to find names for keys
 513 # close notification
 514 close = ctrl+space
 515 # close all notifications
 516 close_all = ctrl+shift+space
 517 # redisplay last message(s)
 518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 519 history = ctrl+shift+h
 520 # context menu
 521 context = ctrl+shift+period
 522 [urgency_low]
 523 # IMPORTANT: colors have to be defined in quotation marks.
 524 # Otherwise the '#' and following  would be interpreted as a comment.
 525 background = "#1d2a30"
 526 foreground = "#71c2af"
 527 timeout = 3
 528 [urgency_normal]
 529 background = "#1d2a30"
 530 foreground = "#71c2af"
 531 timeout = 0
 532 [urgency_critical]
 533 background = "#1d2a30"
 534 foreground = "#ff9982"
 535 timeout = 0
 536
 537 # Every section that isn't one of the above is interpreted as a rules
 538 # to override settings for certain messages.
 539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 541 # and 'format'.
 542 # Shell-like globbing will get expanded.
 543 #
 544 # SCRIPTING
 545 # you can specify a script that gets run when the rule matches by setting
 546 # the 'script' option.
 547 # The script will be called as follows:
 548 # script appname summary body icon urgency
 549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 550 #
 551 # NOTE: if you don't want a notification to be displayed, set the format to ""
 552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 553 # fitting options for rules.
 554 #[espeak]
 555 #    summary = "*"
 556 #    script = dunst_espeak.sh
 557 #[script-test]
 558 #    summary = "*script*"
 559 #    script = dunst_test.sh
 560 #[ignore]
 561 ## This notification will not be displayed
 562 #    summary = "foobar"
 563 #    format = ""
 564 #[signed_on]
 565 #    appname = Pidgin
 566 #    summary = "*signed on*"
 567 #    urgency = low
 568 #
 569 #[signed_off]
 570 #    appname = Pidgin
 571 #    summary = *signed off*
 572 #    urgency = low
 573 #
 574 #[says]
 575 #    appname = Pidgin
 576 #    summary = *says*
 577 #    urgency = critical
 578 #
 579 #[twitter]
 580 #    appname = Pidgin
 581 #    summary = *twitter.com*
 582 #    urgency = normal
 583 #
 584 [xfpm-backlight]
 585     summary = *Brightness*
 586     urgency = low
 587 #+end_src
 588
 589 ** Fontconfig
 590 :PROPERTIES:
 591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 592 :END:
 593
 594 #+begin_src xml
 595 <?xml version="1.0"?>
 596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 597 <fontconfig>
 598  <match target="font">
 599   <edit mode="assign" name="rgba">
 600    <const>rgb</const>
 601   </edit>
 602  </match>
 603  <match target="font">
 604   <edit mode="assign" name="hinting">
 605    <bool>true</bool>
 606   </edit>
 607  </match>
 608  <match target="font">
 609   <edit mode="assign" name="hintstyle">
 610    <const>hintslight</const>
 611   </edit>
 612  </match>
 613  <match target="font">
 614   <edit mode="assign" name="antialias">
 615    <bool>true</bool>
 616   </edit>
 617  </match>
 618  <match target="font">
 619   <edit mode="assign" name="lcdfilter">
 620    <const>lcddefault</const>
 621   </edit>
 622  </match>
 623  <dir>~/.fonts</dir>
 624
 625  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 626  <alias binding="same">
 627   <family>Helvetica</family>
 628   <accept>
 629    <family>Liberation Sans</family>
 630   </accept>
 631 </alias>
 632 </fontconfig>
 633 #+end_src
 634
 635 ** getmail
 636
 637 *** getmailrc
 638 :PROPERTIES:
 639 :header-args+: :tangle ~/.getmail/getmailrc
 640 :END:
 641
 642 #+begin_src conf
 643 [retriever]
 644 type = SimplePOP3SSLRetriever
 645 server = fencepost.gnu.org
 646 username = aminb
 647 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 648 port = 995
 649 use_apop = True
 650
 651 [destination]
 652 type = Maildir
 653 path = ~/mail/gnu/Inbox/
 654
 655 [options]
 656 delete = True
 657 #+end_src
 658
 659 *** getmail.service
 660 :PROPERTIES:
 661 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 662 :END:
 663
 664 #+begin_src conf :tangle no
 665 [Unit]
 666 Description=getmail service
 667
 668 [Service]
 669 Type=oneshot
 670 ExecStart=/usr/bin/getmail
 671 StandardOutput=syslog
 672 StandardError=syslog
 673 #+end_src
 674
 675 *** getmail.timer
 676 :PROPERTIES:
 677 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 678 :END:
 679
 680 #+begin_src conf :tangle no
 681 [Unit]
 682 Description=getmail timer
 683
 684 [Timer]
 685 OnCalendar=*:0/30
 686 Persistent=true
 687 Unit=getmail.service
 688
 689 [Install]
 690 WantedBy=timers.target
 691 #+end_src
 692
 693 ** Git
 694
 695 *** gitconfig
 696 :PROPERTIES:
 697 :header-args+: :tangle ~/.gitconfig
 698 :END:
 699
 700 **** user
 701 #+begin_src conf
 702 [user]
 703     name = Amin Bandali
 704     email = amin@gnu.org
 705     signingkey = CDDE75F903538E71813CDA27D1FBA36627D65876
 706 #+end_src
 707
 708 **** signing
 709 #+begin_src conf
 710 [commit]
 711     gpgsign = true
 712 # [format]
 713 #     signoff = true
 714 #+end_src
 715
 716 **** core
 717 #+begin_src conf
 718 [core]
 719     autocrlf = input  # CRLF -> LF on commit
 720     editor = emacsclient -t
 721     excludesfile = ~/.gitignore_global
 722     pager = "less"
 723 #+end_src
 724
 725 **** gpg
 726 #+begin_src conf
 727 [gpg]
 728     program = gpg2
 729 #+end_src
 730
 731 **** alias
 732 #+begin_src conf
 733 [alias]
 734     git = !exec git  # handle nested git calls, e.g. git git status
 735     aliases = config --get-regexp '^alias\\.'
 736     a = add
 737     s = status
 738     sl = status --long
 739     c = checkout
 740     cb = checkout -b
 741     b = branch
 742     r = rebase
 743     p = pull
 744     pr = pull --rebase
 745     ps = push
 746     psf = push --force
 747     nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
 748     nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
 749 #+end_src
 750
 751 **** color
 752 #+begin_src conf
 753 [color]
 754     ui = auto
 755 [color "status"]
 756     added = green bold
 757     changed = red bold
 758     untracked = red bold
 759 [color "branch"]
 760     current = green bold
 761     remote = magenta bold
 762 [color "diff"]
 763     new = green bold
 764     old = red bold
 765 #+end_src
 766
 767 **** status
 768 #+begin_src conf
 769 [status]
 770     # showUntrackedFiles = all
 771     short=true
 772     branch=true
 773 #+end_src
 774
 775 **** github
 776 #+begin_src conf
 777 [github]
 778         user = aminb
 779 #+end_src
 780
 781 **** send-email
 782 #+begin_src conf
 783 [sendemail]
 784         smtpuser = aminb
 785         smtpserver = fencepost.gnu.org
 786         smtpserverport = 587
 787         smtpencryption = tls
 788         annotate = yes
 789 #+end_src
 790
 791 *** gitignore
 792 :PROPERTIES:
 793 :header-args+: :tangle ~/.gitignore_global
 794 :END:
 795
 796 #+begin_src conf
 797 *.orig
 798 *.py[co]
 799 *.sublime-workspace
 800 *~
 801 .DS_Store
 802 *.elc
 803 *-autoloads.el
 804 #+end_src
 805
 806 ** GnuPG
 807 :PROPERTIES:
 808 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 809 :END:
 810
 811 #+begin_src conf
 812 default-cache-ttl 43200
 813 max-cache-ttl 43200
 814
 815 default-cache-ttl-ssh 10800
 816 max-cache-ttl-ssh 10800
 817
 818 # pinentry-program /usr/bin/pinentry-qt
 819 #+end_src
 820
 821 ** GTK
 822
 823 *** gtk-2.0
 824 :PROPERTIES:
 825 :header-args+: :tangle ~/.gtkrc-2.0
 826 :END:
 827
 828 #+begin_src conf
 829 gtk-theme-name="Greybird"
 830 gtk-icon-theme-name="Paper"
 831 gtk-font-name="Ubuntu 10"
 832 gtk-menu-images=0
 833 # gtk-key-theme-name = "Emacs"
 834 #+end_src
 835
 836 *** gtk-3.0
 837 :PROPERTIES:
 838 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 839 :END:
 840
 841 #+begin_src conf :tangle no
 842 [Settings]
 843 gtk-icon-theme-name = Paper
 844 # gtk-theme-name = Adwaita
 845
 846 gtk-theme-name = Greybird
 847 # gtk-theme-name = Arc-Darker
 848 # gtk-theme-name = Numix-ArchBlue
 849
 850 gtk-font-name = Ubuntu 10
 851 # gtk-key-theme-name = Emacs
 852 #+end_src
 853
 854 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 855 :PROPERTIES:
 856 :header-args+: :tangle ~/.config/i3gs/config
 857 :END:
 858
 859 #+begin_src conf :comments none :tangle no
 860 borders_width=0 0 2 0
 861 separator_width=10
 862
 863 #[mpd]
 864 #preset=MPD
 865 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
 866 #borders_color=#7FDBFF
 867
 868 [ram]
 869 preset=RAM
 870 title=<span weight='heavy' fgcolor='#3D9970'> </span>
 871 borders_color=#3D9970
 872
 873 #[cpu]
 874 #preset=CPU
 875 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
 876 #borders_color=#2ECC40
 877
 878 #[hdd]
 879 #preset=HDD
 880 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
 881 #borders_color=#01FF70
 882
 883 [volume]
 884 command=volume-info
 885 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
 886 borders_color=#7FDBFF
 887
 888 [battery]
 889 preset=BAT
 890 command=battery-percentage-time
 891 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
 892 borders_color=#39CCCC
 893
 894 [wifi]
 895 preset=WIFI
 896 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 897 borders_color=#01FF70
 898
 899 [date]
 900 preset=DATE
 901 command=date '+%-I:%M, %a %b %d '
 902 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 903 borders_color=#FFDC00
 904 separator_width=0
 905 #+end_src
 906
 907 ** i3status
 908 :PROPERTIES:
 909 :header-args+: :tangle ~/.config/i3status/config
 910 :END:
 911
 912 #+begin_src conf :comments none
 913 # i3status configuration file.
 914 # see "man i3status" for documentation.
 915
 916 # It is important that this file is edited as UTF-8.
 917 # The following line should contain a sharp s:
 918 # ß
 919 # If the above line is not correctly displayed, fix your editor first!
 920
 921 general {
 922         colors = true
 923         interval = 5
 924 }
 925
 926 # order += "ipv6"
 927 order += "disk /"
 928 order += "disk /data"
 929 order += "wireless _first_"
 930 # order += "ethernet _first_"
 931 order += "battery 0"
 932 order += "load"
 933 order += "tztime local"
 934
 935 wireless _first_ {
 936         format_up = "W:%quality %essid %ip"
 937         format_down = "W: down"
 938 }
 939
 940 # ethernet _first_ {
 941 #         # if you use %speed, i3status requires root privileges
 942 #         format_up = "E: %ip (%speed)"
 943 #         format_down = "E: down"
 944 # }
 945
 946 battery 0 {
 947         format = "%status %percentage %remaining (%consumption)"
 948         path = "/sys/class/power_supply/BAT%d/uevent"
 949         low_threshold = "30"
 950         threshold_type = "time"
 951         last_full_capacity = false
 952         integer_battery_capacity = true
 953         hide_seconds = true
 954 }
 955
 956 tztime local {
 957         format = "%-I:%M%P %a %b %d"
 958 }
 959
 960 load {
 961         format = "%1min"
 962 }
 963
 964 disk "/" {
 965         format = "/ %avail"
 966 }
 967
 968 disk "/data" {
 969         format = "/data %avail"
 970 }
 971 #+end_src
 972
 973 ** isync
 974
 975 *** mbsyncrc
 976 :PROPERTIES:
 977 :header-args+: :tangle ~/.mbsyncrc
 978 :END:
 979
 980 #+begin_src conf
 981 # Global defaults
 982 CopyArrivalDate yes
 983
 984 ######
 985 IMAPAccount amin
 986 Host nix.aminb.org
 987 User amin@aminb.org
 988 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 989 SSLType IMAPS
 990
 991 IMAPStore amin-remote
 992 Account amin
 993
 994 MaildirStore amin-local
 995 Path ~/mail/amin/
 996 Inbox ~/mail/amin/Inbox
 997 SubFolders Verbatim
 998
 999 Channel amin
1000 Master :amin-remote:
1001 Slave :amin-local:
1002 Patterns * !dovecot*
1003 Create Both
1004 SyncState *
1005
1006 ######
1007 IMAPAccount uwaterloo
1008 Host connect.uwaterloo.ca
1009 User abandali
1010 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1011 SSLType IMAPS
1012
1013 IMAPStore uwaterloo-remote
1014 Account uwaterloo
1015
1016 MaildirStore uwaterloo-local
1017 Path ~/mail/uwaterloo/
1018 Inbox ~/mail/uwaterloo/Inbox
1019 SubFolders Verbatim
1020
1021 Channel uwaterloo
1022 Master :uwaterloo-remote:
1023 Slave :uwaterloo-local:
1024 Patterns * !dovecot*
1025 Create Both
1026 SyncState *
1027 #+end_src
1028
1029 *** mbsync.service
1030 :PROPERTIES:
1031 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1032 :END:
1033
1034 #+begin_src conf :tangle no
1035 [Unit]
1036 Description=mbsync service
1037
1038 [Service]
1039 Type=oneshot
1040 ExecStart=/usr/bin/mbsync -Va
1041 StandardOutput=syslog
1042 StandardError=syslog
1043 #+end_src
1044
1045 *** mbsync.timer
1046 :PROPERTIES:
1047 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1048 :END:
1049
1050 #+begin_src conf :tangle no
1051 [Unit]
1052 Description=mbsync timer
1053
1054 [Timer]
1055 OnCalendar=*:0/15
1056 Persistent=true
1057 Unit=mbsync.service
1058
1059 [Install]
1060 WantedBy=timers.target
1061 #+end_src
1062
1063 ** Latexmk
1064 :PROPERTIES:
1065 :header-args+: :tangle ~/.latexmkrc
1066 :END:
1067
1068 #+begin_src conf
1069 $pdf_previewer = "start zathura %O %S";
1070 $clean_ext = "aux out";
1071
1072 # $pdf_update_method = 4;
1073 # $pdf_update_command = "zathura %O %S";
1074
1075 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1076 # by Ctrl+click in the PDF.
1077 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1078 # editor.
1079 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1080 #+end_src
1081
1082 ** libinput
1083
1084 Improve XPS 15 9560's touchpad experience.
1085
1086 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1087 #+begin_src conf :tangle no
1088 Section "InputClass"
1089     Identifier "libinput touchpad catchall"
1090     Driver "libinput"
1091     MatchIsTouchpad "on"
1092     Option "ClickMethod" "clickfinger"
1093     Option "NaturalScrolling" "true"
1094     Option "Tapping" "on"
1095     Option "TappingButtonMap" "lrm"
1096 EndSection
1097 #+end_src
1098
1099 ** mpd
1100 :PROPERTIES:
1101 :header-args+: :tangle ~/.config/mpd/mpd.conf
1102 :END:
1103
1104 #+begin_src conf
1105 # An example configuration file for MPD.
1106 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1107
1108
1109 # Files and directories #######################################################
1110 #
1111 # This setting controls the top directory which MPD will search to discover the
1112 # available audio files and add them to the daemon's online database. This
1113 # setting defaults to the XDG directory, otherwise the music directory will be
1114 # be disabled and audio files will only be accepted over ipc socket (using
1115 # file:// protocol) or streaming files over an accepted protocol.
1116 #
1117 music_directory         "~/usr/music"
1118 #
1119 # This setting sets the MPD internal playlist directory. The purpose of this
1120 # directory is storage for playlists created by MPD. The server will use
1121 # playlist files not created by the server but only if they are in the MPD
1122 # format. This setting defaults to playlist saving being disabled.
1123 #
1124 playlist_directory              "~/.mpd/playlists"
1125 #
1126 # This setting sets the location of the MPD database. This file is used to
1127 # load the database at server start up and store the database while the
1128 # server is not up. This setting defaults to disabled which will allow
1129 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1130 # files over an accepted protocol.
1131 #
1132 db_file                 "~/.mpd/database"
1133 #
1134 # These settings are the locations for the daemon log files for the daemon.
1135 # These logs are great for troubleshooting, depending on your log_level
1136 # settings.
1137 #
1138 # The special value "syslog" makes MPD use the local syslog daemon. This
1139 # setting defaults to logging to syslog, otherwise logging is disabled.
1140 #
1141 log_file                        "~/.mpd/log"
1142 #
1143 # This setting sets the location of the file which stores the process ID
1144 # for use of mpd --kill and some init scripts. This setting is disabled by
1145 # default and the pid file will not be stored.
1146 #
1147 pid_file                        "~/.mpd/pid"
1148 #
1149 # This setting sets the location of the file which contains information about
1150 # most variables to get MPD back into the same general shape it was in before
1151 # it was brought down. This setting is disabled by default and the server
1152 # state will be reset on server start up.
1153 #
1154 state_file                      "~/.mpd/state"
1155 #
1156 # The location of the sticker database.  This is a database which
1157 # manages dynamic information attached to songs.
1158 #
1159 sticker_file                    "~/.mpd/sticker.sql"
1160 #
1161 ###############################################################################
1162
1163
1164 # General music daemon options ################################################
1165 #
1166 # This setting specifies the user that MPD will run as. MPD should never run as
1167 # root and you may use this setting to make MPD change its user ID after
1168 # initialization. This setting is disabled by default and MPD is run as the
1169 # current user.
1170 #
1171 #user                           "nobody"
1172 #
1173 # This setting specifies the group that MPD will run as. If not specified
1174 # primary group of user specified with "user" setting will be used (if set).
1175 # This is useful if MPD needs to be a member of group such as "audio" to
1176 # have permission to use sound card.
1177 #
1178 #group                          "nogroup"
1179 #
1180 # This setting sets the address for the daemon to listen on. Careful attention
1181 # should be paid if this is assigned to anything other then the default, any.
1182 # This setting can deny access to control of the daemon. Not effective if
1183 # systemd socket activiation is in use.
1184 #
1185 # For network
1186 #bind_to_address                "any"
1187 #
1188 # And for Unix Socket
1189 #bind_to_address                "~/.mpd/socket"
1190 #
1191 # This setting is the TCP port that is desired for the daemon to get assigned
1192 # to.
1193 #
1194 #port                           "6600"
1195 #
1196 # This setting controls the type of information which is logged. Available
1197 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1198 # argument is recommended for troubleshooting, though can quickly stretch
1199 # available resources on limited hardware storage.
1200 #
1201 #log_level                      "default"
1202 #
1203 # If you have a problem with your MP3s ending abruptly it is recommended that
1204 # you set this argument to "no" to attempt to fix the problem. If this solves
1205 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1206 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1207 # point gapless MP3 playback can be enabled.
1208 #
1209 #gapless_mp3_playback                   "yes"
1210 #
1211 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1212 # of starting playback after startup.
1213 #
1214 #restore_paused "no"
1215 #
1216 # This setting enables MPD to create playlists in a format usable by other
1217 # music players.
1218 #
1219 #save_absolute_paths_in_playlists       "no"
1220 #
1221 # This setting defines a list of tag types that will be extracted during the
1222 # audio file discovery process. The complete list of possible values can be
1223 # found in the user manual.
1224 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1225 #
1226 # This setting enables automatic update of MPD's database when files in
1227 # music_directory are changed.
1228 #
1229 #auto_update    "yes"
1230 #
1231 # Limit the depth of the directories being watched, 0 means only watch
1232 # the music directory itself.  There is no limit by default.
1233 #
1234 #auto_update_depth "3"
1235 #
1236 ###############################################################################
1237
1238
1239 # Symbolic link behavior ######################################################
1240 #
1241 # If this setting is set to "yes", MPD will discover audio files by following
1242 # symbolic links outside of the configured music_directory.
1243 #
1244 #follow_outside_symlinks        "yes"
1245 #
1246 # If this setting is set to "yes", MPD will discover audio files by following
1247 # symbolic links inside of the configured music_directory.
1248 #
1249 #follow_inside_symlinks         "yes"
1250 #
1251 ###############################################################################
1252
1253
1254 # Zeroconf / Avahi Service Discovery ##########################################
1255 #
1256 # If this setting is set to "yes", service information will be published with
1257 # Zeroconf / Avahi.
1258 #
1259 #zeroconf_enabled               "yes"
1260 #
1261 # The argument to this setting will be the Zeroconf / Avahi unique name for
1262 # this MPD server on the network.
1263 #
1264 #zeroconf_name                  "Music Player"
1265 #
1266 ###############################################################################
1267
1268
1269 # Permissions #################################################################
1270 #
1271 # If this setting is set, MPD will require password authorization. The password
1272 # setting can be specified multiple times for different password profiles.
1273 #
1274 #password                        "password@read,add,control,admin"
1275 #
1276 # This setting specifies the permissions a user has who has not yet logged in.
1277 #
1278 #default_permissions             "read,add,control,admin"
1279 #
1280 ###############################################################################
1281
1282
1283 # Database #######################################################################
1284 #
1285
1286 #database {
1287 #       plugin "proxy"
1288 #       host "other.mpd.host"
1289 #       port "6600"
1290 #}
1291
1292 # Input #######################################################################
1293 #
1294
1295 input {
1296         plugin "curl"
1297 #       proxy "proxy.isp.com:8080"
1298 #       proxy_user "user"
1299 #       proxy_password "password"
1300 }
1301
1302 #
1303 ###############################################################################
1304
1305 # Audio Output ################################################################
1306 #
1307
1308 audio_output {
1309     type    "pulse"
1310     name    "pulse audio"
1311 }
1312
1313 audio_output {
1314     type    "fifo"
1315     name    "my_fifo"
1316     path    "/tmp/mpd.fifo"
1317     format  "44100:16:2"
1318 }
1319
1320 # MPD supports various audio output types, as well as playing through multiple
1321 # audio outputs at the same time, through multiple audio_output settings
1322 # blocks. Setting this block is optional, though the server will only attempt
1323 # autodetection for one sound card.
1324 #
1325 # An example of an ALSA output:
1326 #
1327 #audio_output {
1328 #       type            "alsa"
1329 #       name            "My ALSA Device"
1330 ##      device          "hw:0,0"        # optional
1331 ##      mixer_type      "hardware"      # optional
1332 ##      mixer_device    "default"       # optional
1333 ##      mixer_control   "PCM"           # optional
1334 ##      mixer_index     "0"             # optional
1335 #}
1336 #
1337 # An example of an OSS output:
1338 #
1339 #audio_output {
1340 #       type            "oss"
1341 #       name            "My OSS Device"
1342 ##      device          "/dev/dsp"      # optional
1343 ##      mixer_type      "hardware"      # optional
1344 ##      mixer_device    "/dev/mixer"    # optional
1345 ##      mixer_control   "PCM"           # optional
1346 #}
1347 #
1348 # An example of a shout output (for streaming to Icecast):
1349 #
1350 #audio_output {
1351 #       type            "shout"
1352 #       encoder         "vorbis"                # optional
1353 #       name            "My Shout Stream"
1354 #       host            "localhost"
1355 #       port            "8000"
1356 #       mount           "/mpd.ogg"
1357 #       password        "hackme"
1358 #       quality         "5.0"
1359 #       bitrate         "128"
1360 #       format          "44100:16:1"
1361 ##      protocol        "icecast2"              # optional
1362 ##      user            "source"                # optional
1363 ##      description     "My Stream Description" # optional
1364 ##      url             "http://example.com"    # optional
1365 ##      genre           "jazz"                  # optional
1366 ##      public          "no"                    # optional
1367 ##      timeout         "2"                     # optional
1368 ##      mixer_type      "software"              # optional
1369 #}
1370 #
1371 # An example of a recorder output:
1372 #
1373 #audio_output {
1374 #       type            "recorder"
1375 #       name            "My recorder"
1376 #       encoder         "vorbis"                # optional, vorbis or lame
1377 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1378 ##      quality         "5.0"                   # do not define if bitrate is defined
1379 #       bitrate         "128"                   # do not define if quality is defined
1380 #       format          "44100:16:1"
1381 #}
1382 #
1383 # An example of a httpd output (built-in HTTP streaming server):
1384 #
1385 #audio_output {
1386 #       type            "httpd"
1387 #       name            "My HTTP Stream"
1388 #       encoder         "vorbis"                # optional, vorbis or lame
1389 #       port            "8000"
1390 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1391 ##      quality         "5.0"                   # do not define if bitrate is defined
1392 #       bitrate         "128"                   # do not define if quality is defined
1393 #       format          "44100:16:1"
1394 #       max_clients     "0"                     # optional 0=no limit
1395 #}
1396 #
1397 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1398 #
1399 #audio_output {
1400 #       type            "pulse"
1401 #       name            "My Pulse Output"
1402 ##      server          "remote_server"         # optional
1403 ##      sink            "remote_server_sink"    # optional
1404 #}
1405 #
1406 # An example of a winmm output (Windows multimedia API).
1407 #
1408 #audio_output {
1409 #       type            "winmm"
1410 #       name            "My WinMM output"
1411 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1412 #               or
1413 ##      device          "0"             # optional
1414 ##      mixer_type      "hardware"      # optional
1415 #}
1416 #
1417 # An example of an openal output.
1418 #
1419 #audio_output {
1420 #       type            "openal"
1421 #       name            "My OpenAL output"
1422 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1423 #}
1424 #
1425 # An example of an sndio output.
1426 #
1427 #audio_output {
1428 #       type            "sndio"
1429 #       name            "sndio output"
1430 #       mixer_type      "software"
1431 #}
1432 #
1433 # An example of an OS X output:
1434 #
1435 #audio_output {
1436 #       type            "osx"
1437 #       name            "My OS X Device"
1438 ##      device          "Built-in Output"       # optional
1439 ##      channel_map      "-1,-1,0,1"    # optional
1440 #}
1441 #
1442 ## Example "pipe" output:
1443 #
1444 #audio_output {
1445 #       type            "pipe"
1446 #       name            "my pipe"
1447 #       command         "aplay -f cd 2>/dev/null"
1448 ## Or if you're want to use AudioCompress
1449 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1450 ## Or to send raw PCM stream through PCM:
1451 #       command         "nc example.org 8765"
1452 #       format          "44100:16:2"
1453 #}
1454 #
1455 ## An example of a null output (for no audio output):
1456 #
1457 #audio_output {
1458 #       type            "null"
1459 #       name            "My Null Output"
1460 #       mixer_type      "none"                  # optional
1461 #}
1462 #
1463 ###############################################################################
1464
1465
1466 # Normalization automatic volume adjustments ##################################
1467 #
1468 # This setting specifies the type of ReplayGain to use. This setting can have
1469 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1470 # chooses between "track" and "album" depending on the current state of
1471 # random playback. If random playback is enabled then "track" mode is used.
1472 # See <http://www.replaygain.org> for more details about ReplayGain.
1473 # This setting is off by default.
1474 #
1475 #replaygain                     "album"
1476 #
1477 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1478 # default this setting is disabled.
1479 #
1480 #replaygain_preamp              "0"
1481 #
1482 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1483 # By default this setting is disabled.
1484 #
1485 #replaygain_missing_preamp      "0"
1486 #
1487 # This setting enables or disables ReplayGain limiting.
1488 # MPD calculates actual amplification based on the ReplayGain tags
1489 # and replaygain_preamp / replaygain_missing_preamp setting.
1490 # If replaygain_limit is enabled MPD will never amplify audio signal
1491 # above its original level. If replaygain_limit is disabled such amplification
1492 # might occur. By default this setting is enabled.
1493 #
1494 #replaygain_limit               "yes"
1495 #
1496 # This setting enables on-the-fly normalization volume adjustment. This will
1497 # result in the volume of all playing audio to be adjusted so the output has
1498 # equal "loudness". This setting is disabled by default.
1499 #
1500 #volume_normalization           "no"
1501 #
1502 ###############################################################################
1503
1504 # Character Encoding ##########################################################
1505 #
1506 # If file or directory names do not display correctly for your locale then you
1507 # may need to modify this setting.
1508 #
1509 #filesystem_charset             "UTF-8"
1510 #
1511 ###############################################################################
1512 #+end_src
1513
1514 ** msmtp
1515 :PROPERTIES:
1516 :header-args+: :tangle ~/.msmtprc
1517 :END:
1518
1519 #+begin_src conf
1520 # Set default values for all following accounts.
1521 defaults
1522 port 587
1523 tls on
1524 auth on
1525 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1526 logfile ~/.msmtp.log
1527
1528 # aminb
1529 account aminb
1530 host nix.aminb.org
1531 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1532 tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
1533 tls_starttls on
1534 from amin@aminb.org
1535 user amin@aminb.org
1536 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1537
1538 # gnu
1539 account gnu
1540 host fencepost.gnu.org
1541 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1542 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1543 tls_starttls on
1544 from aminb@gnu.org
1545 user aminb
1546 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1547
1548 # gnu (amin)
1549 account gnu-amin : gnu
1550 from amin@gnu.org
1551
1552 # gnu (mab)
1553 account gnu-mab : gnu
1554 from mab@gnu.org
1555
1556 # uwaterloo
1557 account uwaterloo
1558 host connect.uwaterloo.ca
1559 tls_starttls on
1560 from abandali@uwaterloo.ca
1561 user abandali
1562 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1563 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1564
1565 # Set a default account
1566 account default : aminb
1567 #+end_src
1568
1569 ** ncmpcpp
1570
1571 *** config
1572 :PROPERTIES:
1573 :header-args+: :tangle ~/.ncmpcpp/config
1574 :END:
1575
1576 #+begin_src conf :tangle no
1577 ##############################################################
1578 ## This is the example configuration file. Copy it to       ##
1579 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1580 ## and set up your preferences.                             ##
1581 ##############################################################
1582 #
1583 ##### directories ######
1584 ##
1585 ## Directory for storing ncmpcpp related files.
1586 ## Changing it is useful if you want to store
1587 ## everything somewhere else and provide command
1588 ## line setting for alternative location to config
1589 ## file which defines that while launching ncmpcpp.
1590 ##
1591 #
1592 ncmpcpp_directory = ~/.ncmpcpp
1593 #
1594 ##
1595 ## Directory for storing downloaded lyrics. It
1596 ## defaults to ~/.lyrics since other MPD clients
1597 ## (eg. ncmpc) also use that location.
1598 ##
1599 #
1600 #lyrics_directory = ~/.lyrics
1601 #
1602 ##### connection settings #####
1603 #
1604 #mpd_host = localhost
1605 #
1606 #mpd_port = 6600
1607 #
1608 #mpd_connection_timeout = 5
1609 #
1610 ## Needed for tag editor and file operations to work.
1611 ##
1612 mpd_music_dir = ~/usr/music
1613 #
1614 #mpd_crossfade_time = 5
1615 #
1616 ##### music visualizer #####
1617 ##
1618 ## Note: In order to make music visualizer work you'll
1619 ## need to use mpd fifo output, whose format parameter
1620 ## has to be set to 44100:16:1 for mono visualization
1621 ## or 44100:16:2 for stereo visualization. Example
1622 ## configuration (it has to be put into mpd.conf):
1623 ##
1624 ## audio_output {
1625 ##        type            "fifo"
1626 ##        name            "Visualizer feed"
1627 ##        path            "/tmp/mpd.fifo"
1628 ##        format          "44100:16:2"
1629 ## }
1630 ##
1631 #
1632 visualizer_fifo_path = /tmp/mpd.fifo
1633 #
1634 ##
1635 ## Note: Below parameter is needed for ncmpcpp
1636 ## to determine which output provides data for
1637 ## visualizer and thus allow syncing between
1638 ## visualization and sound as currently there
1639 ## are some problems with it.
1640 ##
1641 #
1642 visualizer_output_name = my fifo
1643 #
1644 ##
1645 ## If you set format to 44100:16:2, make it 'yes'.
1646 ##
1647 visualizer_in_stereo = yes
1648 #
1649 ##
1650 ## Multiply received samples by given value. Very
1651 ## useful for proper visualization of quiet music.
1652 ##
1653 #visualizer_sample_multiplier = 1
1654 #
1655 ##
1656 ## Note: Below parameter defines how often ncmpcpp
1657 ## has to "synchronize" visualizer and audio outputs.
1658 ## 30 seconds is optimal value, but if you experience
1659 ## synchronization problems, set it to lower value.
1660 ## Keep in mind that sane values start with >=10.
1661 ##
1662 #
1663 visualizer_sync_interval = 30
1664 #
1665 ##
1666 ## Note: To enable spectrum frequency visualization
1667 ## you need to compile ncmpcpp with fftw3 support.
1668 ##
1669 #
1670 ## Available values: spectrum, wave, wave_filled, ellipse.
1671 ##
1672 visualizer_type = spectrum
1673 #
1674 #visualizer_look = ●▮
1675 visualizer_look = "●•"
1676 #
1677 #visualizer_color = blue, cyan, green, yellow, magenta, red
1678 #
1679 ## Alternative subset of 256 colors for terminals that support it.
1680 ##
1681 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1682 #
1683 ##### system encoding #####
1684 ##
1685 ## ncmpcpp should detect your charset encoding
1686 ## but if it failed to do so, you can specify
1687 ## charset encoding you are using here.
1688 ##
1689 ## Note: You can see whether your ncmpcpp build
1690 ## supports charset detection by checking output
1691 ## of `ncmpcpp --version`.
1692 ##
1693 ## Note: Since MPD uses UTF-8 by default, setting
1694 ## this option makes sense only if your encoding
1695 ## is different.
1696 ##
1697 #
1698 #system_encoding = ""
1699 #
1700 ##### delays #####
1701 #
1702 ## Time of inactivity (in seconds) after playlist
1703 ## highlighting will be disabled (0 = always on).
1704 ##
1705 #playlist_disable_highlight_delay = 5
1706 #
1707 ## Defines how long messages are supposed to be visible.
1708 ##
1709 #message_delay_time = 5
1710 #
1711 ##### song format #####
1712 ##
1713 ## For a song format you can use:
1714 ##
1715 ## %l - length
1716 ## %f - filename
1717 ## %D - directory
1718 ## %a - artist
1719 ## %A - album artist
1720 ## %t - title
1721 ## %b - album
1722 ## %y - date
1723 ## %n - track number (01/12 -> 01)
1724 ## %N - full track info (01/12 -> 01/12)
1725 ## %g - genre
1726 ## %c - composer
1727 ## %p - performer
1728 ## %d - disc
1729 ## %C - comment
1730 ## %P - priority
1731 ## $R - begin right alignment
1732 ##
1733 ## If you want to make sure that a part of the format is displayed
1734 ## only when certain tags are present, you can archieve it by
1735 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1736 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1737 ## It is also possible to define a list of alternatives by providing
1738 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1739 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1740 ## present.
1741 ##
1742 ## Note: If you want to set limit on maximal length of a tag, just
1743 ## put the appropriate number between % and character that defines
1744 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1745 ##
1746 ## In addition, formats support markers used for text attributes.
1747 ## They are followed by character '$'. After that you can put:
1748 ##
1749 ## - 0 - default window color (discards all other colors)
1750 ## - 1 - black
1751 ## - 2 - red
1752 ## - 3 - green
1753 ## - 4 - yellow
1754 ## - 5 - blue
1755 ## - 6 - magenta
1756 ## - 7 - cyan
1757 ## - 8 - white
1758 ## - 9 - end of current color
1759 ## - b - bold text
1760 ## - u - underline text
1761 ## - r - reverse colors
1762 ## - a - use alternative character set
1763 ##
1764 ## If you don't want to use a non-color attribute anymore, just put it
1765 ## again, but this time insert character '/' between '$' and attribute
1766 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1767 ## or filename with reversed colors.
1768 ##
1769 ## If you want to use 256 colors and/or background colors in formats
1770 ## (the naming scheme is described below in section about color
1771 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1772 ## the artist tag to one of the non-standard colors and make it have
1773 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1774 ## that for standard colors this is interchangable with attributes
1775 ## listed above.
1776 ##
1777 ## Note: colors can be nested.
1778 ##
1779 #
1780 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1781 #
1782 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1783 #
1784 #song_library_format = {%n - }{%t}|{%f}
1785 #
1786 #
1787 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1788 #
1789 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1790 #
1791 #now_playing_prefix = $b
1792 #
1793 #now_playing_suffix = $/b
1794 #
1795 #browser_playlist_prefix = "$2playlist$9 "
1796 #
1797 #selected_item_prefix = $6
1798 #
1799 #selected_item_suffix = $9
1800 #
1801 #modified_item_prefix = $3> $9
1802 #
1803 ##
1804 ## Note: attributes are not supported for the following variables.
1805 ##
1806 #song_window_title_format = {%a - }{%t}|{%f}
1807 ##
1808 ## Note: Below variables are used for sorting songs in browser.
1809 ## The sort mode determines how songs are sorted, and can be used
1810 ## in combination with a sort format to specify a custom sorting format.
1811 ## Available values for browser_sort_mode are "name", "mtime", "format"
1812 ## and "noop".
1813 ##
1814 #
1815 #browser_sort_mode = name
1816 #
1817 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1818 #
1819 ##### columns settings #####
1820 ##
1821 ## syntax of song columns list format is "column column etc."
1822 ##
1823 ## - syntax for each column is:
1824 ##
1825 ## (width of the column)[color of the column]{displayed tag}
1826 ##
1827 ## Note: Width is by default in %, if you want a column to
1828 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1829 ## will be the column that take 10% of screen (so the real width
1830 ## will depend on actual screen size), whereas (10f)[white]{a}
1831 ## will take 10 terminal cells, no matter how wide the screen is.
1832 ##
1833 ## - color is optional (if you want the default one,
1834 ##   leave the field empty).
1835 ##
1836 ## Note: You can give a column additional attributes by putting appropriate
1837 ## character after displayed tag character. Available attributes are:
1838 ##
1839 ## - r - column will be right aligned
1840 ## - E - if tag is empty, empty tag marker won't be displayed
1841 ##
1842 ## You can also:
1843 ##
1844 ## - give a column custom name by putting it after attributes,
1845 ##   separated with character ':', e.g. {lr:Length} gives you
1846 ##   right aligned column of lengths named "Length".
1847 ##
1848 ## - define sequence of tags, that have to be displayed in case
1849 ##   predecessor is empty in a way similar to the one in classic
1850 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1851 ##   creates column named "Owner" that tries to display artist
1852 ##   tag and then composer and performer if previous ones are
1853 ##   not available.
1854 ##
1855 #
1856 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1857 #
1858 ##### various settings #####
1859 #
1860 ##
1861 ## Note: Custom command that will be executed each
1862 ## time song changes. Useful for notifications etc.
1863 ##
1864 #execute_on_song_change = ""
1865 #
1866 #playlist_show_mpd_host = no
1867 #
1868 #playlist_show_remaining_time = no
1869 #
1870 #playlist_shorten_total_times = no
1871 #
1872 #playlist_separate_albums = no
1873 #
1874 ##
1875 ## Note: Possible display modes: classic, columns.
1876 ##
1877 #playlist_display_mode = columns
1878 #
1879 #browser_display_mode = classic
1880 #
1881 #search_engine_display_mode = classic
1882 #
1883 #playlist_editor_display_mode = classic
1884 #
1885 #discard_colors_if_item_is_selected = yes
1886 #
1887 #incremental_seeking = yes
1888 #
1889 #seek_time = 1
1890 #
1891 #volume_change_step = 2
1892 #
1893 #autocenter_mode = no
1894 #
1895 #centered_cursor = no
1896 #
1897 ##
1898 ## Note: You can specify third character which will
1899 ## be used to build 'empty' part of progressbar.
1900 ##
1901 #progressbar_look = =>
1902 progressbar_look = "─╼╶"
1903 #progressbar_look = "─⊙╶"
1904 #
1905 #progressbar_boldness = yes
1906 #
1907 ## Available values: database, playlist.
1908 ##
1909 #default_place_to_search_in = database
1910 #
1911 ## Available values: classic, alternative.
1912 ##
1913 #user_interface = classic
1914 #
1915 #data_fetching_delay = yes
1916 #
1917 ## Available values: artist, album_artist, date, genre, composer, performer.
1918 ##
1919 #media_library_primary_tag = artist
1920 #
1921 ## Available values: wrapped, normal.
1922 ##
1923 #default_find_mode = wrapped
1924 #
1925 #default_tag_editor_pattern = %n - %t
1926 #
1927 #header_visibility = yes
1928 #
1929 #statusbar_visibility = yes
1930 #
1931 #titles_visibility = yes
1932 #
1933 #header_text_scrolling = yes
1934 #
1935 #cyclic_scrolling = no
1936 #
1937 #lines_scrolled = 2
1938 #
1939 #follow_now_playing_lyrics = no
1940 #
1941 #fetch_lyrics_for_current_song_in_background = no
1942 #
1943 #store_lyrics_in_song_dir = no
1944 #
1945 #generate_win32_compatible_filenames = yes
1946 #
1947 #allow_for_physical_item_deletion = no
1948 #
1949 ##
1950 ## Note: If you set this variable, ncmpcpp will try to
1951 ## get info from last.fm in language you set and if it
1952 ## fails, it will fall back to english. Otherwise it will
1953 ## use english the first time.
1954 ##
1955 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1956 ##
1957 #lastfm_preferred_language = en
1958 #
1959 #show_hidden_files_in_local_browser = no
1960 #
1961 ##
1962 ## How shall screen switcher work?
1963 ##
1964 ## - "previous" - switch between the current and previous screen.
1965 ## - "screen1,...,screenN" - switch between given sequence of screens.
1966 ##
1967 ## Screens available for use: help, playlist, browser, search_engine,
1968 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1969 ##
1970 #screen_switcher_mode = playlist, browser
1971 #
1972 ##
1973 ## Note: You can define startup screen
1974 ## by choosing screen from the list above.
1975 ##
1976 #startup_screen = playlist
1977 #
1978 ##
1979 ## Note: You can define startup slave screen
1980 ## by choosing screen from the list above or
1981 ## an empty value for no slave screen.
1982 ##
1983 #startup_slave_screen = ""
1984 #
1985 #startup_slave_screen_focus = no
1986 #
1987 ##
1988 ## Default width of locked screen (in %).
1989 ## Acceptable values are from 20 to 80.
1990 ##
1991 #
1992 #locked_screen_width_part = 50
1993 #
1994 #ask_for_locked_screen_width_part = yes
1995 #
1996 #jump_to_now_playing_song_at_start = yes
1997 #
1998 #ask_before_clearing_playlists = yes
1999 #
2000 #clock_display_seconds = no
2001 #
2002 #display_volume_level = yes
2003 #
2004 #display_bitrate = no
2005 #
2006 #display_remaining_time = no
2007 #
2008 ## Available values: none, basic, extended, perl.
2009 ##
2010 #regular_expressions = perl
2011 #
2012 ##
2013 ## Note: If below is enabled, ncmpcpp will ignore leading
2014 ## "The" word while sorting items in browser, tags in
2015 ## media library, etc.
2016 ##
2017 #ignore_leading_the = no
2018 #
2019 #block_search_constraints_change_if_items_found = yes
2020 #
2021 #mouse_support = yes
2022 #
2023 #mouse_list_scroll_whole_page = yes
2024 #
2025 #empty_tag_marker = <empty>
2026 #
2027 #tags_separator = " | "
2028 #
2029 #tag_editor_extended_numeration = no
2030 #
2031 #media_library_sort_by_mtime = no
2032 #
2033 #enable_window_title = yes
2034 #
2035 ##
2036 ## Note: You can choose default search mode for search
2037 ## engine. Available modes are:
2038 ##
2039 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2040 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2041 ##       but if your mpd is on a remote machine, downloading big database
2042 ##       to process it can take a while
2043 ## - 3 - match only exact values (this mode uses mpd function for searching
2044 ##       in database and local one for searching in current playlist)
2045 ##
2046 #
2047 #search_engine_default_search_mode = 1
2048 #
2049 #external_editor = nano
2050 #
2051 ## Note: set to yes if external editor is a console application.
2052 ##
2053 #use_console_editor = yes
2054 #
2055 ##### colors definitions #####
2056 ##
2057 ## It is possible to set a background color by setting a color
2058 ## value "<foreground>_<background>", e.g. red_black will set
2059 ## foregound color to red and background color to black.
2060 ##
2061 ## In addition, for terminals that support 256 colors it
2062 ## is possible to set one of them by using a number in range
2063 ## [1, 256] instead of color name, e.g. numerical value
2064 ## corresponding to red_black is 2_1. To find out if the
2065 ## terminal supports 256 colors, run ncmpcpp and check out
2066 ## the bottom of the help screen for list of available colors
2067 ## and their numerical values.
2068 ##
2069 ## Note: due to technical limitations of ncurses, if 256 colors
2070 ## are used, it is possible to either use only the colors with
2071 ## default background color, or all pairs from 1_1 up to 254_127,
2072 ## depending on the ncurses version used.
2073 ##
2074 #
2075 #colors_enabled = yes
2076 #
2077 #empty_tag_color = cyan
2078 #
2079 #header_window_color = default
2080 #
2081 #volume_color = default
2082 #
2083 #state_line_color = default
2084 #
2085 #state_flags_color = default
2086 #
2087 #main_window_color = yellow
2088 #
2089 #color1 = white
2090 #
2091 #color2 = green
2092 #
2093 #main_window_highlight_color = yellow
2094 #
2095 #progressbar_color = black
2096 #
2097 #progressbar_elapsed_color = green
2098 #
2099 #statusbar_color = default
2100 #
2101 #alternative_ui_separator_color = black
2102 #
2103 #active_column_color = red
2104 #
2105 #window_border_color = green
2106 #
2107 #active_window_border = red
2108 #
2109 #+end_src
2110
2111 *** bindings
2112 :PROPERTIES:
2113 :header-args+: :tangle ~/.ncmpcpp/bindings
2114 :END:
2115
2116 #+begin_src conf :tangle no
2117 def_key "j"
2118     scroll_down
2119 def_key "k"
2120     scroll_up
2121
2122 def_key "ctrl-u"
2123     page_up
2124 def_key "ctrl-d"
2125     page_down
2126
2127 def_key "h"
2128     previous_column
2129 def_key "l"
2130     next_column
2131
2132 def_key "."
2133     show_lyrics
2134
2135 def_key "n"
2136     next_found_item
2137 def_key "N"
2138     previous_found_item
2139
2140 def_key "J"
2141     move_sort_order_down
2142 def_key "K"
2143     move_sort_order_up
2144 #+end_src
2145
2146 ** notmuch
2147
2148 *** notmuch-config
2149 :PROPERTIES:
2150 :header-args+: :tangle ~/.notmuch-config
2151 :END:
2152
2153 #+begin_src conf
2154 # .notmuch-config - Configuration file for the notmuch mail system
2155 #
2156 # For more information about notmuch, see https://notmuchmail.org
2157
2158 # Database configuration
2159 #
2160 # The only value supported here is 'path' which should be the top-level
2161 # directory where your mail currently exists and to where mail will be
2162 # delivered in the future. Files should be individual email messages.
2163 # Notmuch will store its database within a sub-directory of the path
2164 # configured here named ".notmuch".
2165 #
2166 [database]
2167 path=/home/amin/mail
2168
2169 # User configuration
2170 #
2171 # Here is where you can let notmuch know how you would like to be
2172 # addressed. Valid settings are
2173 #
2174 #       name            Your full name.
2175 #       primary_email   Your primary email address.
2176 #       other_email     A list (separated by ';') of other email addresses
2177 #                       at which you receive email.
2178 #
2179 # Notmuch will use the various email addresses configured here when
2180 # formatting replies. It will avoid including your own addresses in the
2181 # recipient list of replies, and will set the From address based on the
2182 # address to which the original email was addressed.
2183 #
2184 [user]
2185 name=Amin Bandali
2186 primary_email=amin@aminb.org
2187 other_email=amin@gnu.org;abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
2188
2189 # Configuration for "notmuch new"
2190 #
2191 # The following options are supported here:
2192 #
2193 #       tags    A list (separated by ';') of the tags that will be
2194 #               added to all messages incorporated by "notmuch new".
2195 #
2196 #       ignore  A list (separated by ';') of file and directory names
2197 #               that will not be searched for messages by "notmuch new".
2198 #
2199 #               NOTE: *Every* file/directory that goes by one of those
2200 #               names will be ignored, independent of its depth/location
2201 #               in the mail store.
2202 #
2203 [new]
2204 tags=new;
2205 #tags=unread;inbox;
2206 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2207
2208 # Search configuration
2209 #
2210 # The following option is supported here:
2211 #
2212 #       exclude_tags
2213 #               A ;-separated list of tags that will be excluded from
2214 #               search results by default.  Using an excluded tag in a
2215 #               query will override that exclusion.
2216 #
2217 [search]
2218 exclude_tags=deleted;spam;
2219
2220 # Maildir compatibility configuration
2221 #
2222 # The following option is supported here:
2223 #
2224 #       synchronize_flags      Valid values are true and false.
2225 #
2226 #       If true, then the following maildir flags (in message filenames)
2227 #       will be synchronized with the corresponding notmuch tags:
2228 #
2229 #               Flag    Tag
2230 #               ----    -------
2231 #               D       draft
2232 #               F       flagged
2233 #               P       passed
2234 #               R       replied
2235 #               S       unread (added when 'S' flag is not present)
2236 #
2237 #       The "notmuch new" command will notice flag changes in filenames
2238 #       and update tags, while the "notmuch tag" and "notmuch restore"
2239 #       commands will notice tag changes and update flags in filenames
2240 #
2241 [maildir]
2242 synchronize_flags=true
2243
2244 # Cryptography related configuration
2245 #
2246 # The following option is supported here:
2247 #
2248 #       gpg_path
2249 #               binary name or full path to invoke gpg.
2250 #
2251 [crypto]
2252 gpg_path=gpg
2253 #+end_src
2254
2255 *** pre-new hook
2256 :PROPERTIES:
2257 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2258 :END:
2259
2260 #+begin_src sh
2261 touch /tmp/gnusieve.log
2262 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2263              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2264 #+end_src
2265
2266 *** post-new hook
2267 :PROPERTIES:
2268 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2269 :END:
2270
2271 #+begin_src sh
2272 # apply sent tag to messages sent by me
2273 notmuch tag -new +sent -- from:amin@aminb.org or from:amin@gnu.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
2274
2275 # initial tagging
2276 notmuch tag -latest                     -- tag:latest
2277 notmuch tag +inbox +unread +latest -new -- tag:new
2278
2279
2280 # apply tags to lists
2281
2282 # <aminb>
2283 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2284 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2285
2286 notmuch tag -inbox +pay -- folder:amin/pay
2287 notmuch tag -inbox +banking -- folder:amin/banking
2288 # </aminb>
2289
2290 # <uw>
2291 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2292 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2293
2294 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2295 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2296 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2297 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2298 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2299 # </uw>
2300
2301 # <gnu>
2302 notmuch tag -inbox +l/emacs-devel       -- folder:gnu/l/emacs-devel
2303 notmuch tag -inbox +l/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2304 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2305 notmuch tag -inbox +l/fencepost-users   -- folder:gnu/l/fencepost-users
2306 notmuch tag -inbox +l/guix-devel        -- folder:gnu/l/guix-devel
2307 notmuch tag -inbox +l/guile-devel       -- folder:gnu/l/guile-devel
2308 notmuch tag -inbox +l/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2309 notmuch tag -inbox +l/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2310 notmuch tag -inbox +l/www-commits       -- folder:gnu/l/www-commits
2311 notmuch tag -inbox +l/www-discuss       -- folder:gnu/l/www-discuss
2312 notmuch tag -inbox +webmasters          -- folder:gnu/webmasters
2313
2314 notmuch tag -inbox +l/deepspec     -- folder:gnu/l/deepspec
2315 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2316 notmuch tag -inbox +l/haskell-art  -- folder:gnu/l/haskell-art
2317 notmuch tag -inbox +l/notmuch      -- folder:gnu/l/notmuch
2318
2319 notmuch tag -inbox +l/~aminb/test-priv         -- folder:gnu/l/~aminb/test-priv
2320 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins   -- folder:gnu/l/~sircmpwn/sr.ht-admins
2321 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2322 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev      -- folder:gnu/l/~sircmpwn/sr.ht-dev
2323 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss  -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2324 # </gnu>
2325
2326 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2327 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2328 #+end_src
2329
2330 *** notmuch.service
2331 :PROPERTIES:
2332 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2333 :END:
2334
2335 #+begin_src conf :tangle no
2336 [Unit]
2337 Description=notmuch service
2338
2339 [Service]
2340 Type=oneshot
2341 ExecStart=/usr/bin/notmuch new
2342 StandardOutput=syslog
2343 StandardError=syslog
2344 #+end_src
2345
2346 *** notmuch.timer
2347 :PROPERTIES:
2348 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2349 :END:
2350
2351 #+begin_src conf :tangle no
2352 [Unit]
2353 Description=notmuch timer
2354
2355 [Timer]
2356 OnCalendar=*:0/5
2357 Persistent=true
2358 Unit=notmuch.service
2359
2360 [Install]
2361 WantedBy=timers.target
2362 #+end_src
2363
2364 ** offlineimap
2365
2366 *** offlineimaprc
2367 :PROPERTIES:
2368 :header-args+: :tangle ~/.offlineimaprc
2369 :END:
2370
2371 #+begin_src conf :tangle no
2372 [general]
2373 pythonfile = ~/.offlineimap.py
2374 accounts = Gmail, aminb
2375 maxsyncaccounts = 3
2376
2377 [Account Gmail]
2378 localrepository = GmailL
2379 remoterepository = GmailR
2380
2381 [Account aminb]
2382 localrepository = aminbL
2383 remoterepository = aminbR
2384
2385 [Repository GmailL]
2386 type = Maildir
2387 localfolders = ~/Maildir/Gmail
2388
2389 [Repository GmailR]
2390 type = IMAP
2391 remotehost = imap.gmail.com
2392 remoteusereval = mailuser("gmail")
2393 remotepasseval = mailpasswd("gmail")
2394 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2395 ssl = yes
2396 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2397 maxconnections = 1
2398 realdelete = no
2399
2400 [Repository aminbL]
2401 type = Maildir
2402 localfolders = ~/Maildir/aminb
2403
2404 [Repository aminbR]
2405 type = IMAP
2406 remotehost = mail.aminb.org
2407 remoteusereval = mailuser("aminb")
2408 remotepasseval = mailpasswd("aminb")
2409 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2410 ssl = yes
2411 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2412 maxconnections = 1
2413 realdelete = no
2414 #+end_src
2415
2416 *** offlineimap.py
2417 :PROPERTIES:
2418 :header-args+: :tangle ~/.offlineimap.py
2419 :END:
2420
2421 #+begin_src python :tangle no
2422 import os
2423 import subprocess
2424
2425 def mailpasswd(acct):
2426     acct = os.path.basename(acct)
2427     path = "/home/amin/.passwd/%s.gpg" % acct
2428     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2429     try:
2430         return subprocess.check_output(args).strip()
2431     except subprocess.CalledProcessError:
2432         return ""
2433
2434 def mailuser(acct):
2435     acct = os.path.basename(acct)
2436     path = "/home/amin/.passwd/%s" % acct
2437     args = ["cat", path]
2438     try:
2439         return subprocess.check_output(args).strip()
2440     except subprocess.CalledProcessError:
2441         return ""
2442
2443 def prime_gpg_agent():
2444   ret = False
2445   i = 1
2446   while not ret:
2447     ret = (mailpasswd("prime") == "prime")
2448     if i > 2:
2449       from offlineimap.ui import getglobalui
2450       sys.stderr.write("Error reading in passwords. Terminating.\n")
2451       getglobalui().terminate()
2452     i += 1
2453   return ret
2454
2455 prime_gpg_agent()
2456 #+end_src
2457
2458 ** pigeonhole
2459 *** gnu.sieve
2460 :PROPERTIES:
2461 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2462 :END:
2463
2464 #+begin_src conf
2465 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2466
2467 if anyof (
2468   address :is "from" "webmasters@gnu.org",
2469   address :is "from" "webmasters-comment@gnu.org") {
2470   fileinto :create "webmasters";
2471   stop;
2472 }
2473
2474 include :personal "lists";
2475 #+end_src
2476
2477 *** lists.sieve
2478 :PROPERTIES:
2479 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2480 :END:
2481
2482 #+begin_src conf
2483 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2484  "include" ];
2485
2486 if anyof (
2487     header :contains "list-id" "<emacs-devel.gnu.org>",
2488     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2489     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2490     header :contains "list-id" "<fencepost-users.gnu.org>",
2491     header :contains "list-id" "<guix-devel.gnu.org>",
2492     header :contains "list-id" "<guile-devel.gnu.org>",
2493     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2494     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2495     header :contains "list-id" "<www-commits.gnu.org>",
2496     header :contains "list-id" "<www-discuss.gnu.org>",
2497     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2498     header :contains "list-id" "<haskell-cafe.haskell.org>",
2499     header :contains "list-id" "<haskell-art.we.lurk.org>",
2500     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2501     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2502         set :lower "listname" "${1}";
2503         fileinto :create "l/${listname}";
2504     }
2505 }
2506
2507 if anyof (
2508     header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2509     header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2510     header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2511     header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2512     header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2513     if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2514         set :lower "username" "${1}";
2515         set :lower "listname" "${2}";
2516         fileinto :create "l/${username}/${listname}";
2517     }
2518 }
2519 #+end_src
2520
2521 ** polybar
2522
2523 *** config
2524 :PROPERTIES:
2525 :header-args+: :tangle ~/.config/polybar/config
2526 :END:
2527
2528 #+begin_src conf :tangle no
2529 ;=====================================================
2530 ;
2531 ;   To learn more about how to configure Polybar
2532 ;   go to https://github.com/jaagr/polybar
2533 ;
2534 ;   The README contains alot of information
2535 ;
2536 ;=====================================================
2537
2538 [colors]
2539 ;background = ${xrdb:color0:#222}
2540 background = #222
2541 background-alt = #444
2542 ;foreground = ${xrdb:color7:#222}
2543 foreground = #eee
2544 foreground-alt = #888
2545 primary = #ffb52a
2546 secondary = #e60053
2547 alert = #bd2c40
2548
2549 [bar/main]
2550 ;monitor = ${env:MONITOR:HDMI-1}
2551 width = 100%
2552 height = 27
2553 ;offset-x = 1%
2554 ;offset-y = 1%
2555 radius = 3.0
2556 fixed-center = true
2557
2558 background = ${colors.background}
2559 foreground = ${colors.foreground}
2560
2561 line-size = 3
2562 line-color = #f00
2563
2564 border-size = 4
2565 border-color = #00000000
2566
2567 padding-left = 0
2568 padding-right = 2
2569
2570 module-margin-left = 2
2571 module-margin-right = 2
2572
2573 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2574 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2575 font-2 = Wuncon Siji:pixelsize=10;1
2576 font-3 = FontAwesome:pixelsize=10;1
2577
2578 modules-left = bspwm xwindow
2579 modules-center =
2580 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2581
2582 tray-position = right
2583 tray-padding = 1
2584 ;tray-transparent = true
2585 ;tray-background = #0063ff
2586 tray-maxsize = 18
2587
2588 wm-restack = bspwm
2589
2590 ;override-redirect = true
2591
2592 scroll-up = bspwm-desknext
2593 scroll-down = bspwm-deskprev
2594
2595 [module/xwindow]
2596 type = internal/xwindow
2597 label = %title:0:50:...%
2598
2599 [module/xkeyboard]
2600 type = internal/xkeyboard
2601 blacklist-0 = num lock
2602
2603 format-prefix = " "
2604 format-prefix-foreground = ${colors.foreground-alt}
2605 format-prefix-underline = ${colors.secondary}
2606
2607 label-layout = %layout%
2608 label-layout-underline = ${colors.secondary}
2609
2610 label-indicator-padding = 2
2611 label-indicator-margin = 1
2612 label-indicator-background = ${colors.secondary}
2613 label-indicator-underline = ${colors.secondary}
2614
2615 [module/filesystem]
2616 type = internal/fs
2617 interval = 25
2618
2619 mount-0 = /
2620
2621 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2622 label-unmounted = %mountpoint% not mounted
2623 label-unmounted-foreground = ${colors.foreground-alt}
2624
2625 [module/bspwm]
2626 type = internal/bspwm
2627
2628 label-focused = %index%
2629 label-focused-background = ${colors.background-alt}
2630 label-focused-underline= ${colors.primary}
2631 label-focused-padding = 2
2632
2633 label-occupied = %index%
2634 label-occupied-padding = 2
2635
2636 label-urgent = %index%!
2637 label-urgent-background = ${colors.alert}
2638 label-urgent-padding = 2
2639
2640 label-empty = %index%
2641 label-empty-foreground = ${colors.foreground-alt}
2642 label-empty-padding = 2
2643
2644 [module/i3]
2645 type = internal/i3
2646 format = <label-state> <label-mode>
2647 index-sort = true
2648 wrapping-scroll = false
2649
2650 ; Only show workspaces on the same output as the bar
2651 ;pin-workspaces = true
2652
2653 label-mode-padding = 2
2654 label-mode-foreground = #000
2655 label-mode-background = ${colors.primary}
2656
2657 ; focused = Active workspace on focused monitor
2658 label-focused = %index%
2659 label-focused-background = ${module/bspwm.label-focused-background}
2660 label-focused-underline = ${module/bspwm.label-focused-underline}
2661 label-focused-padding = ${module/bspwm.label-focused-padding}
2662
2663 ; unfocused = Inactive workspace on any monitor
2664 label-unfocused = %index%
2665 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2666
2667 ; visible = Active workspace on unfocused monitor
2668 label-visible = %index%
2669 label-visible-background = ${self.label-focused-background}
2670 label-visible-underline = ${self.label-focused-underline}
2671 label-visible-padding = ${self.label-focused-padding}
2672
2673 ; urgent = Workspace with urgency hint set
2674 label-urgent = %index%
2675 label-urgent-background = ${module/bspwm.label-urgent-background}
2676 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2677
2678 [module/mpd]
2679 type = internal/mpd
2680 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2681
2682 icon-prev = 
2683 icon-stop = 
2684 icon-play = 
2685 icon-pause = 
2686 icon-next = 
2687
2688 label-song-maxlen = 25
2689 label-song-ellipsis = true
2690
2691 [module/xbacklight]
2692 type = internal/xbacklight
2693
2694 format = <label> <bar>
2695 label = BL
2696
2697 bar-width = 10
2698 bar-indicator = |
2699 bar-indicator-foreground = #ff
2700 bar-indicator-font = 2
2701 bar-fill = ─
2702 bar-fill-font = 2
2703 bar-fill-foreground = #9f78e1
2704 bar-empty = ─
2705 bar-empty-font = 2
2706 bar-empty-foreground = ${colors.foreground-alt}
2707
2708 [module/backlight-acpi]
2709 inherit = module/xbacklight
2710 type = internal/backlight
2711 ;card = intel_backlight
2712 card = mba6x_backlight
2713
2714 [module/cpu]
2715 type = internal/cpu
2716 interval = 2
2717 format-prefix = " "
2718 format-prefix-foreground = ${colors.foreground-alt}
2719 format-underline = #f90000
2720 label = %percentage%%
2721
2722 [module/memory]
2723 type = internal/memory
2724 interval = 2
2725 format-prefix = " "
2726 format-prefix-foreground = ${colors.foreground-alt}
2727 format-underline = #4bffdc
2728 label = %percentage_used%%
2729
2730 [module/wlan]
2731 type = internal/network
2732 interface =
2733 interval = 3.0
2734
2735 format-connected = <ramp-signal> <label-connected>
2736 format-connected-underline = #9f78e1
2737 label-connected = %essid%
2738
2739 format-disconnected =
2740 ;format-disconnected = <label-disconnected>
2741 ;format-disconnected-underline = ${self.format-connected-underline}
2742 ;label-disconnected = %ifname% disconnected
2743 ;label-disconnected-foreground = ${colors.foreground-alt}
2744
2745 ramp-signal-0 = 
2746 ramp-signal-1 = 
2747 ramp-signal-2 = 
2748 ramp-signal-3 = 
2749 ramp-signal-4 = 
2750 ramp-signal-foreground = ${colors.foreground-alt}
2751
2752 [module/eth]
2753 type = internal/network
2754 interface =
2755 interval = 3.0
2756
2757 format-connected-underline = #55aa55
2758 format-connected-prefix = " "
2759 format-connected-prefix-foreground = ${colors.foreground-alt}
2760 label-connected = %local_ip%
2761
2762 format-disconnected =
2763 ;format-disconnected = <label-disconnected>
2764 ;format-disconnected-underline = ${self.format-connected-underline}
2765 ;label-disconnected = %ifname% disconnected
2766 ;label-disconnected-foreground = ${colors.foreground-alt}
2767
2768 [module/date]
2769 type = internal/date
2770 interval = 5
2771
2772 date =
2773 date-alt = " %Y-%m-%d"
2774
2775 time = %H:%M
2776 time-alt = %H:%M:%S
2777
2778 format-prefix = 
2779 format-prefix-foreground = ${colors.foreground-alt}
2780 format-underline = #0a6cf5
2781
2782 label = %date% %time%
2783
2784 [module/volume]
2785 type = internal/volume
2786
2787 format-volume = <label-volume> <bar-volume>
2788 label-volume = vol
2789 label-volume-foreground = ${root.foreground}
2790
2791 format-muted-prefix = " "
2792 format-muted-foreground = ${colors.foreground-alt}
2793 label-muted = mute
2794
2795 bar-volume-width = 10
2796 bar-volume-foreground-0 = #55aa55
2797 bar-volume-foreground-1 = #55aa55
2798 bar-volume-foreground-2 = #55aa55
2799 bar-volume-foreground-3 = #55aa55
2800 bar-volume-foreground-4 = #55aa55
2801 bar-volume-foreground-5 = #f5a70a
2802 bar-volume-foreground-6 = #ff5555
2803 bar-volume-gradient = false
2804 bar-volume-indicator = |
2805 bar-volume-indicator-font = 2
2806 bar-volume-fill = ─
2807 bar-volume-fill-font = 2
2808 bar-volume-empty = ─
2809 bar-volume-empty-font = 2
2810 bar-volume-empty-foreground = ${colors.foreground-alt}
2811
2812 [module/battery]
2813 type = internal/battery
2814 battery = BAT0
2815 adapter = ADP1
2816 full-at = 64
2817
2818 format-charging = <animation-charging> <label-charging>
2819 format-charging-underline = #ffb52a
2820
2821 format-discharging = <ramp-capacity> <label-discharging>
2822 format-discharging-underline = ${self.format-charging-underline}
2823
2824 format-full-prefix = " "
2825 format-full-prefix-foreground = ${colors.foreground-alt}
2826 format-full-underline = ${self.format-charging-underline}
2827
2828 ramp-capacity-0 = 
2829 ramp-capacity-1 = 
2830 ramp-capacity-2 = 
2831 ramp-capacity-foreground = ${colors.foreground-alt}
2832
2833 animation-charging-0 = 
2834 animation-charging-1 = 
2835 animation-charging-2 = 
2836 animation-charging-foreground = ${colors.foreground-alt}
2837 animation-charging-framerate = 750
2838
2839 [module/temperature]
2840 type = internal/temperature
2841 thermal-zone = 1
2842 warn-temperature = 66
2843
2844 format = <ramp> <label>
2845 format-underline = #f50a4d
2846 format-warn = <ramp> <label-warn>
2847 format-warn-underline = ${self.format-underline}
2848
2849 label = %temperature%
2850 label-warn = %temperature%
2851 label-warn-foreground = ${colors.secondary}
2852
2853 ramp-0 = 
2854 ramp-1 = 
2855 ramp-2 = 
2856 ramp-foreground = ${colors.foreground-alt}
2857
2858 [module/powermenu]
2859 type = custom/menu
2860
2861 format-spacing = 1
2862
2863 label-open = 
2864 label-open-foreground = ${colors.secondary}
2865 label-close =  cancel
2866 label-close-foreground = ${colors.secondary}
2867 label-separator = |
2868 label-separator-foreground = ${colors.foreground-alt}
2869
2870 menu-0-0 = reboot
2871 menu-0-0-exec = menu-open-1
2872 menu-0-1 = power off
2873 menu-0-1-exec = menu-open-2
2874
2875 menu-1-0 = cancel
2876 menu-1-0-exec = menu-open-0
2877 menu-1-1 = reboot
2878 menu-1-1-exec = sudo reboot
2879
2880 menu-2-0 = power off
2881 menu-2-0-exec = sudo poweroff
2882 menu-2-1 = cancel
2883 menu-2-1-exec = menu-open-0
2884
2885 [module/mail]
2886 type = custom/script
2887 interval = 60
2888 format = <label>
2889 format-prefix = " "
2890 format-prefix-foreground = ${colors.foreground-alt}
2891 format-underline = #0a6cf5
2892 exec = notmuch count tag:unread
2893
2894 [settings]
2895 screenchange-reload = true
2896 ;compositing-background = xor
2897 ;compositing-background = screen
2898 ;compositing-foreground = source
2899 ;compositing-border = over
2900
2901 [global/wm]
2902 margin-top = 0
2903 margin-bottom = 0
2904
2905 ; vim:ft=dosini
2906 #+end_src
2907
2908 *** polybar-launch
2909 :PROPERTIES:
2910 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2911 :END:
2912
2913 #+begin_src sh :tangle no
2914 # Terminate already running bar instances
2915 killall -q polybar
2916
2917 # Wait until the processes have been shut down
2918 while pgrep -x polybar >/dev/null; do sleep 1; done
2919
2920 # Launch main bar
2921 polybar main &
2922
2923 echo "Bars launched..."
2924 #+end_src
2925
2926 ** PowerTOP
2927 :PROPERTIES:
2928 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2929 :END:
2930
2931 #+begin_src conf
2932 [Unit]
2933 Description=Powertop tunings
2934
2935 [Service]
2936 ExecStart=/usr/bin/powertop --auto-tune
2937 RemainAfterExit=true
2938
2939 [Install]
2940 WantedBy=multi-user.target
2941 #+end_src
2942
2943 ** ranger
2944
2945 *** rc.conf
2946 :PROPERTIES:
2947 :header-args+: :tangle ~/.config/ranger/rc.conf
2948 :END:
2949
2950 #+begin_src conf :tangle no
2951 # ===================================================================
2952 # This file contains the default startup commands for ranger.
2953 # To change them, it is recommended to create the file
2954 # ~/.config/ranger/rc.conf and add your custom commands there.
2955 #
2956 # If you copy this whole file there, you may want to set the environment
2957 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2958 #
2959 # The purpose of this file is mainly to define keybindings and settings.
2960 # For running more complex python code, please create a plugin in "plugins/" or
2961 # a command in "commands.py".
2962 #
2963 # Each line is a command that will be run before the user interface
2964 # is initialized.  As a result, you can not use commands which rely
2965 # on the UI such as :delete or :mark.
2966 # ===================================================================
2967
2968 # ===================================================================
2969 # == Options
2970 # ===================================================================
2971
2972 # How many columns are there, and what are their relative widths?
2973 set column_ratios 1,3,4
2974
2975 # Which files should be hidden? (regular expression)
2976 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2977
2978 # Show hidden files? You can toggle this by typing 'zh'
2979 set show_hidden false
2980
2981 # Ask for a confirmation when running the "delete" command?
2982 # Valid values are "always" (default), "never", "multiple"
2983 # With "multiple", ranger will ask only if you delete multiple files at once.
2984 set confirm_on_delete multiple
2985
2986 # Which script is used to generate file previews?
2987 # ranger ships with scope.sh, a script that calls external programs (see
2988 # README for dependencies) to preview images, archives, etc.
2989 set preview_script ~/.config/ranger/scope.sh
2990
2991 # Use the external preview script or display simple plain text previews?
2992 set use_preview_script true
2993
2994 # Open all images in this directory when running certain image viewers
2995 # like feh or sxiv?  You can still open selected files by marking them.
2996 set open_all_images true
2997
2998 # Be aware of version control systems and display information.
2999 set vcs_aware false
3000
3001 # State of the three backends git, hg, bzr. The possible states are
3002 # disabled, local (only show local info), enabled (show local and remote
3003 # information).
3004 set vcs_backend_git enabled
3005 set vcs_backend_hg disabled
3006 set vcs_backend_bzr disabled
3007
3008 # Preview images in full color with the external command "w3mimgpreview"?
3009 # This requires the console web browser "w3m" and a supported terminal.
3010 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3011 set preview_images true
3012
3013 # Use a unicode "..." character to mark cut-off filenames?
3014 set unicode_ellipsis false
3015
3016 # Show dotfiles in the bookmark preview box?
3017 set show_hidden_bookmarks true
3018
3019 # Which colorscheme to use?  These colorschemes are available by default:
3020 # default, jungle, snow
3021 set colorscheme default
3022
3023 # Preview files on the rightmost column?
3024 # And collapse (shrink) the last column if there is nothing to preview?
3025 set preview_files true
3026 set preview_directories true
3027 set collapse_preview true
3028
3029 # Save the console history on exit?
3030 set save_console_history true
3031
3032 # Draw the status bar on top of the browser window (default: bottom)
3033 set status_bar_on_top false
3034
3035 # Draw a progress bar in the status bar which displays the average state of all
3036 # currently running tasks which support progress bars?
3037 set draw_progress_bar_in_status_bar true
3038
3039 # Draw borders around columns?
3040 set draw_borders true
3041
3042 # Display the directory name in tabs?
3043 set dirname_in_tabs false
3044
3045 # Enable the mouse support?
3046 set mouse_enabled true
3047
3048 # Display the file size in the main column or status bar?
3049 set display_size_in_main_column true
3050 set display_size_in_status_bar true
3051
3052 # Display files tags in all columns or only in main column?
3053 set display_tags_in_all_columns true
3054
3055 # Set a title for the window?
3056 set update_title false
3057
3058 # Set the title to "ranger" in the tmux program?
3059 set update_tmux_title false
3060
3061 # Shorten the title if it gets long?  The number defines how many
3062 # directories are displayed at once, 0 turns off this feature.
3063 set shorten_title 3
3064
3065 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3066 set tilde_in_titlebar false
3067
3068 # How many directory-changes or console-commands should be kept in history?
3069 set max_history_size 20
3070 set max_console_history_size 50
3071
3072 # Try to keep so much space between the top/bottom border when scrolling:
3073 set scroll_offset 8
3074
3075 # Flush the input after each key hit?  (Noticable when ranger lags)
3076 set flushinput true
3077
3078 # Padding on the right when there's no preview?
3079 # This allows you to click into the space to run the file.
3080 set padding_right true
3081
3082 # Save bookmarks (used with mX and `X) instantly?
3083 # This helps to synchronize bookmarks between multiple ranger
3084 # instances but leads to *slight* performance loss.
3085 # When false, bookmarks are saved when ranger is exited.
3086 set autosave_bookmarks true
3087
3088 # You can display the "real" cumulative size of directories by using the
3089 # command :get_cumulative_size or typing "dc".  The size is expensive to
3090 # calculate and will not be updated automatically.  You can choose
3091 # to update it automatically though by turning on this option:
3092 set autoupdate_cumulative_size false
3093
3094 # Turning this on makes sense for screen readers:
3095 set show_cursor false
3096
3097 # One of: size, basename, mtime, type
3098 set sort natural
3099
3100 # Additional sorting options
3101 set sort_reverse false
3102 set sort_case_insensitive true
3103 set sort_directories_first true
3104
3105 # Enable this if key combinations with the Alt Key don't work for you.
3106 # (Especially on xterm)
3107 set xterm_alt_key false
3108
3109 # ===================================================================
3110 # == Local Options
3111 # ===================================================================
3112 # You can set local options that only affect a single directory.
3113
3114 # Examples:
3115 # setlocal path=~/downloads sort mtime
3116
3117 # ===================================================================
3118 # == Command Aliases in the Console
3119 # ===================================================================
3120
3121 alias e    edit
3122 alias q    quit
3123 alias q!   quitall
3124 alias qall quitall
3125 alias setl setlocal
3126
3127 alias filter     scout -prt
3128 alias find       scout -aet
3129 alias mark       scout -mr
3130 alias unmark     scout -Mr
3131 alias search     scout -rs
3132 alias search_inc scout -rts
3133 alias travel     scout -aefiklst
3134
3135 # ===================================================================
3136 # == Define keys for the browser
3137 # ===================================================================
3138
3139 # Basic
3140 map     Q quit!
3141 map     q quit
3142 copymap q ZZ ZQ
3143
3144 map R     reload_cwd
3145 map <C-r> reset
3146 map <C-l> redraw_window
3147 map <C-c> abort
3148 map <esc> change_mode normal
3149
3150 map i display_file
3151 map ? help
3152 map W display_log
3153 map w taskview_open
3154 map S shell $SHELL
3155
3156 map :  console
3157 map ;  console
3158 map !  console shell
3159 map @  console -p6 shell  %%s
3160 map #  console shell -p
3161 map s  console shell
3162 map r  chain draw_possible_programs; console open_with
3163 map f  console find
3164 map cd console cd
3165
3166 # Tagging / Marking
3167 map t       tag_toggle
3168 map ut      tag_remove
3169 map "<any>  tag_toggle tag=%any
3170 map <Space> mark_files toggle=True
3171 map v       mark_files all=True toggle=True
3172 map uv      mark_files all=True val=False
3173 map V       toggle_visual_mode
3174 map uV      toggle_visual_mode reverse=True
3175
3176 # For the nostalgics: Midnight Commander bindings
3177 map <F1> help
3178 map <F3> display_file
3179 map <F4> edit
3180 map <F5> copy
3181 map <F6> cut
3182 map <F7> console mkdir
3183 map <F8> console delete
3184 map <F10> exit
3185
3186 # In case you work on a keyboard with dvorak layout
3187 map <UP>       move up=1
3188 map <DOWN>     move down=1
3189 map <LEFT>     move left=1
3190 map <RIGHT>    move right=1
3191 map <HOME>     move to=0
3192 map <END>      move to=-1
3193 map <PAGEDOWN> move down=1   pages=True
3194 map <PAGEUP>   move up=1     pages=True
3195 map <CR>       move right=1
3196 map <DELETE>   console delete
3197 map <INSERT>   console touch
3198
3199 # VIM-like
3200 copymap <UP>       k
3201 copymap <DOWN>     j
3202 copymap <LEFT>     h
3203 copymap <RIGHT>    l
3204 copymap <HOME>     gg
3205 copymap <END>      G
3206 copymap <PAGEDOWN> <C-F>
3207 copymap <PAGEUP>   <C-B>
3208
3209 map J  move down=0.5  pages=True
3210 map K  move up=0.5    pages=True
3211 copymap J <C-D>
3212 copymap K <C-U>
3213
3214 # Jumping around
3215 map H     history_go -1
3216 map L     history_go 1
3217 map ]     move_parent 1
3218 map [     move_parent -1
3219 map }     traverse
3220
3221 map gh cd ~
3222 map ge cd /etc
3223 map gu cd /usr
3224 map gd cd /dev
3225 map gl cd -r .
3226 map gL cd -r %f
3227 map go cd /opt
3228 map gv cd /var
3229 map gm cd /media
3230 map gM cd /mnt
3231 map gs cd /srv
3232 map gr cd /
3233 map gR eval fm.cd(ranger.RANGERDIR)
3234 map g/ cd /
3235 map g? cd /usr/share/doc/ranger
3236
3237 # External Programs
3238 map E  edit
3239 map du shell -p du --max-depth=1 -h --apparent-size
3240 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3241 map yp shell -d echo -n %d/%f | xsel -i
3242 map yd shell -d echo -n %d    | xsel -i
3243 map yn shell -d echo -n %f    | xsel -i
3244
3245 # Filesystem Operations
3246 map =  chmod
3247
3248 map cw console rename
3249 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3250 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3251
3252 map pp paste
3253 map po paste overwrite=True
3254 map pl paste_symlink relative=False
3255 map pL paste_symlink relative=True
3256 map phl paste_hardlink
3257 map pht paste_hardlinked_subtree
3258
3259 map dd cut
3260 map ud uncut
3261 map da cut mode=add
3262 map dr cut mode=remove
3263
3264 map yy copy
3265 map uy uncut
3266 map ya copy mode=add
3267 map yr copy mode=remove
3268
3269 # Temporary workarounds
3270 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3271 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3272 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3273 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3274 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3275 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3276 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3277 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3278
3279 # Searching
3280 map /  console search
3281 map n  search_next
3282 map N  search_next forward=False
3283 map ct search_next order=tag
3284 map cs search_next order=size
3285 map ci search_next order=mimetype
3286 map cc search_next order=ctime
3287 map cm search_next order=mtime
3288 map ca search_next order=atime
3289
3290 # Tabs
3291 map <C-n>     tab_new ~
3292 map <C-w>     tab_close
3293 map <TAB>     tab_move 1
3294 map <S-TAB>   tab_move -1
3295 map <A-Right> tab_move 1
3296 map <A-Left>  tab_move -1
3297 map gt        tab_move 1
3298 map gT        tab_move -1
3299 map gn        tab_new ~
3300 map gc        tab_close
3301 map uq        tab_restore
3302 map <a-1>     tab_open 1
3303 map <a-2>     tab_open 2
3304 map <a-3>     tab_open 3
3305 map <a-4>     tab_open 4
3306 map <a-5>     tab_open 5
3307 map <a-6>     tab_open 6
3308 map <a-7>     tab_open 7
3309 map <a-8>     tab_open 8
3310 map <a-9>     tab_open 9
3311
3312 # Sorting
3313 map or toggle_option sort_reverse
3314 map os chain set sort=size;      set sort_reverse=False
3315 map ob chain set sort=basename;  set sort_reverse=False
3316 map on chain set sort=natural;   set sort_reverse=False
3317 map om chain set sort=mtime;     set sort_reverse=False
3318 map oc chain set sort=ctime;     set sort_reverse=False
3319 map oa chain set sort=atime;     set sort_reverse=False
3320 map ot chain set sort=type;      set sort_reverse=False
3321
3322 map oS chain set sort=size;      set sort_reverse=True
3323 map oB chain set sort=basename;  set sort_reverse=True
3324 map oN chain set sort=natural;   set sort_reverse=True
3325 map oM chain set sort=mtime;     set sort_reverse=True
3326 map oC chain set sort=ctime;     set sort_reverse=True
3327 map oA chain set sort=atime;     set sort_reverse=True
3328 map oT chain set sort=type;      set sort_reverse=True
3329
3330 map dc get_cumulative_size
3331
3332 # Settings
3333 map zc    toggle_option collapse_preview
3334 map zd    toggle_option sort_directories_first
3335 map zh    toggle_option show_hidden
3336 map <C-h> toggle_option show_hidden
3337 map zi    toggle_option flushinput
3338 map zm    toggle_option mouse_enabled
3339 map zp    toggle_option preview_files
3340 map zP    toggle_option preview_directories
3341 map zs    toggle_option sort_case_insensitive
3342 map zu    toggle_option autoupdate_cumulative_size
3343 map zv    toggle_option use_preview_script
3344 map zf    console filter
3345
3346 # Bookmarks
3347 map `<any>  enter_bookmark %any
3348 map '<any>  enter_bookmark %any
3349 map m<any>  set_bookmark %any
3350 map um<any> unset_bookmark %any
3351
3352 map m<bg>   draw_bookmarks
3353 copymap m<bg>  um<bg> `<bg> '<bg>
3354
3355 # Generate all the chmod bindings with some python help:
3356 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3357 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3358 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3359 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3360 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3361
3362 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3363 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3364 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3365 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3366 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3367
3368 # ===================================================================
3369 # == Define keys for the console
3370 # ===================================================================
3371 # Note: Unmapped keys are passed directly to the console.
3372
3373 # Basic
3374 cmap <tab>   eval fm.ui.console.tab()
3375 cmap <s-tab> eval fm.ui.console.tab(-1)
3376 cmap <ESC>   eval fm.ui.console.close()
3377 cmap <CR>    eval fm.ui.console.execute()
3378 cmap <C-l>   redraw_window
3379
3380 copycmap <ESC> <C-c>
3381 copycmap <CR>  <C-j>
3382
3383 # Move around
3384 cmap <up>    eval fm.ui.console.history_move(-1)
3385 cmap <down>  eval fm.ui.console.history_move(1)
3386 cmap <left>  eval fm.ui.console.move(left=1)
3387 cmap <right> eval fm.ui.console.move(right=1)
3388 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3389 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3390
3391 # Line Editing
3392 cmap <backspace>  eval fm.ui.console.delete(-1)
3393 cmap <delete>     eval fm.ui.console.delete(0)
3394 cmap <C-w>        eval fm.ui.console.delete_word()
3395 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3396 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3397 cmap <C-y>        eval fm.ui.console.paste()
3398
3399 # And of course the emacs way
3400 copycmap <up>        <C-p>
3401 copycmap <down>      <C-n>
3402 copycmap <left>      <C-b>
3403 copycmap <right>     <C-f>
3404 copycmap <home>      <C-a>
3405 copycmap <end>       <C-e>
3406 copycmap <delete>    <C-d>
3407 copycmap <backspace> <C-h>
3408
3409 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3410 # and <backspace2> (code 127).  To be sure, use both.
3411 copycmap <backspace> <backspace2>
3412
3413 # This special expression allows typing in numerals:
3414 cmap <allow_quantifiers> false
3415
3416 # ===================================================================
3417 # == Pager Keybindings
3418 # ===================================================================
3419
3420 # Movement
3421 pmap  <down>      pager_move  down=1
3422 pmap  <up>        pager_move  up=1
3423 pmap  <left>      pager_move  left=4
3424 pmap  <right>     pager_move  right=4
3425 pmap  <home>      pager_move  to=0
3426 pmap  <end>       pager_move  to=-1
3427 pmap  <pagedown>  pager_move  down=1.0  pages=True
3428 pmap  <pageup>    pager_move  up=1.0    pages=True
3429 pmap  <C-d>       pager_move  down=0.5  pages=True
3430 pmap  <C-u>       pager_move  up=0.5    pages=True
3431
3432 copypmap <UP>       k  <C-p>
3433 copypmap <DOWN>     j  <C-n> <CR>
3434 copypmap <LEFT>     h
3435 copypmap <RIGHT>    l
3436 copypmap <HOME>     g
3437 copypmap <END>      G
3438 copypmap <C-d>      d
3439 copypmap <C-u>      u
3440 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3441 copypmap <PAGEUP>   p  b  <C-B>
3442
3443 # Basic
3444 pmap     <ESC> pager_close
3445 copypmap <ESC> q Q i <F3>
3446 pmap E      edit_file
3447
3448 # ===================================================================
3449 # == Taskview Keybindings
3450 # ===================================================================
3451
3452 # Movement
3453 tmap <up>        taskview_move up=1
3454 tmap <down>      taskview_move down=1
3455 tmap <home>      taskview_move to=0
3456 tmap <end>       taskview_move to=-1
3457 tmap <pagedown>  taskview_move down=1.0  pages=True
3458 tmap <pageup>    taskview_move up=1.0    pages=True
3459 tmap <C-d>       taskview_move down=0.5  pages=True
3460 tmap <C-u>       taskview_move up=0.5    pages=True
3461
3462 copytmap <UP>       k  <C-p>
3463 copytmap <DOWN>     j  <C-n> <CR>
3464 copytmap <HOME>     g
3465 copytmap <END>      G
3466 copytmap <C-u>      u
3467 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3468 copytmap <PAGEUP>   p  b  <C-B>
3469
3470 # Changing priority and deleting tasks
3471 tmap J          eval -q fm.ui.taskview.task_move(-1)
3472 tmap K          eval -q fm.ui.taskview.task_move(0)
3473 tmap dd         eval -q fm.ui.taskview.task_remove()
3474 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3475 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3476 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3477
3478 # Basic
3479 tmap <ESC> taskview_close
3480 copytmap <ESC> q Q w <C-c>
3481 #+end_src
3482
3483 *** scope.sh
3484 :PROPERTIES:
3485 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3486 :END:
3487
3488 #+begin_src sh :tangle no
3489 # ranger supports enhanced previews.  If the option "use_preview_script"
3490 # is set to True and this file exists, this script will be called and its
3491 # output is displayed in ranger.  ANSI color codes are supported.
3492
3493 # NOTES: This script is considered a configuration file.  If you upgrade
3494 # ranger, it will be left untouched. (You must update it yourself.)
3495 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3496
3497 # Meanings of exit codes:
3498 # code | meaning    | action of ranger
3499 # -----+------------+-------------------------------------------
3500 # 0    | success    | success. display stdout as preview
3501 # 1    | no preview | failure. display no preview at all
3502 # 2    | plain text | display the plain content of the file
3503 # 3    | fix width  | success. Don't reload when width changes
3504 # 4    | fix height | success. Don't reload when height changes
3505 # 5    | fix both   | success. Don't ever reload
3506
3507 # Meaningful aliases for arguments:
3508 path="$1"    # Full path of the selected file
3509 width="$2"   # Width of the preview pane (number of fitting characters)
3510 height="$3"  # Height of the preview pane (number of fitting characters)
3511
3512 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3513
3514 # Find out something about the file:
3515 mimetype=$(file --mime-type -Lb "$path")
3516 extension=${path##*.}
3517
3518 # Functions:
3519 # runs a command and saves its output into $output.  Useful if you need
3520 # the return value AND want to use the output in a pipe
3521 try() { output=$(eval '"$@"'); }
3522
3523 # writes the output of the previouosly used "try" command
3524 dump() { echo "$output"; }
3525
3526 # a common post-processing function used after most commands
3527 trim() { head -n "$maxln"; }
3528
3529 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3530 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3531
3532 case "$extension" in
3533     # Archive extensions:
3534     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3535     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3536         try als "$path" && { dump | trim; exit 0; }
3537         try acat "$path" && { dump | trim; exit 3; }
3538         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3539         exit 1;;
3540     rar)
3541         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3542     # PDF documents:
3543     pdf)
3544         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3545             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3546     # BitTorrent Files
3547     torrent)
3548         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3549     # HTML Pages:
3550     htm|html|xhtml)
3551         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3552         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3553         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3554         ;; # fall back to highlight/cat if the text browsers fail
3555 esac
3556
3557 case "$mimetype" in
3558     # Syntax highlight for text files:
3559     text/* | */xml)
3560         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3561     # Ascii-previews of images:
3562     image/*)
3563         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3564     # Display information about media files:
3565     video/* | audio/*)
3566         exiftool "$path" && exit 5
3567         # Use sed to remove spaces so the output fits into the narrow window
3568         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3569 esac
3570
3571 exit 1
3572 #+end_src
3573
3574 ** redshift
3575 :PROPERTIES:
3576 :header-args+: :tangle ~/.config/redshift.conf :comments none
3577 :END:
3578
3579 #+begin_src conf
3580 ; Global settings for redshift
3581 [redshift]
3582 ; Set the day and night screen temperatures (Neutral is 6500K)
3583 ;temp-day=5700
3584 ;temp-night=3500
3585
3586 ;temp-day=6500
3587 temp-day=6200
3588 ;temp-night=4800
3589 ;temp-night=5000
3590 ;temp-night=4500
3591 temp-night=4000
3592
3593 ; Enable/Disable a smooth transition between day and night
3594 ; 0 will cause a direct change from day to night screen temperature.
3595 ; 1 will gradually increase or decrease the screen temperature.
3596 transition=1
3597
3598 ; Set the screen brightness. Default is 1.0.
3599 ;brightness=0.9
3600 ; It is also possible to use different settings for day and night
3601 ; since version 1.8.
3602 ;brightness-day=0.7
3603 ;brightness-night=0.4
3604 ; Set the screen gamma (for all colors, or each color channel
3605 ; individually)
3606 ;gamma=0.8
3607 ;gamma=1.0
3608 ;gamma=0.8:0.7:0.8
3609 ; This can also be set individually for day and night since
3610 ; version 1.10.
3611 ;gamma-day=0.8:0.7:0.8
3612 ;gamma-night=0.6
3613
3614 ; Set the location-provider: 'geoclue2' or 'manual'
3615 ; type 'redshift -l list' to see possible values.
3616 ; The location provider settings are in a different section.
3617 ;location-provider=manual
3618 location-provider=geoclue2
3619
3620 ; Set the adjustment-method: 'randr', 'vidmode'
3621 ; type 'redshift -m list' to see all possible values.
3622 ; 'randr' is the preferred method, 'vidmode' is an older API.
3623 ; but works in some cases when 'randr' does not.
3624 ; The adjustment method settings are in a different section.
3625 adjustment-method=randr
3626
3627 ; Configuration of the location-provider:
3628 ; type 'redshift -l PROVIDER:help' to see the settings.
3629 ; ex: 'redshift -l manual:help'
3630 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3631 ; are negative numbers.
3632 ;[manual]
3633 ;lat=48.1
3634 ;lon=11.6
3635
3636 ; Configuration of the adjustment-method
3637 ; type 'redshift -m METHOD:help' to see the settings.
3638 ; ex: 'redshift -m randr:help'
3639 ; In this example, randr is configured to adjust screen 1.
3640 ; Note that the numbering starts from 0, so this is actually the
3641 ; second screen. If this option is not specified, Redshift will try
3642 ; to adjust _all_ screens.
3643 ;[randr]
3644 ;screen=1
3645 #+end_src
3646
3647 ** rofi
3648 :PROPERTIES:
3649 :header-args+: :tangle ~/.config/rofi/config
3650 :END:
3651
3652 #+begin_src conf
3653 rofi.font: Ubuntu Mono 13
3654 ! rofi.font: Inconsolata 16
3655 ! rofi.font: Iosevka 13
3656 ! rofi.font: Source Code Pro 11
3657 rofi.modi: run,window
3658 ! rofi.width: 640
3659 rofi.width: 600
3660 !rofi.location: 2
3661 !rofi.yoffset: 200
3662 rofi.monitor: -1
3663 !rofi.lines: 10
3664
3665 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3666 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3667 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3668
3669 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3670 #+end_src
3671
3672 ** rofi-pass
3673 :PROPERTIES:
3674 :header-args+: :tangle ~/.config/rofi-pass/config
3675 :END:
3676
3677 #+begin_src conf
3678 # permanently set alternative root dir
3679 # root=/path/to/root
3680
3681 # rofi command. Make sure to have "$@" as last argument
3682 _rofi () {
3683     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3684     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3685 }
3686
3687 # xdotool needs the keyboard layout to be set using setxkbmap
3688 # You can do this in your autostart scripts (e.g. xinitrc)
3689
3690 # If for some reason, you cannot do this, you can set the command here.
3691 # and set fix_layout to true
3692 fix_layout=false
3693
3694 layout_cmd () {
3695   setxkbmap us
3696 }
3697
3698 # fields to be used
3699 URL_field='url'
3700 USERNAME_field='user'
3701 AUTOTYPE_field='autotype'
3702
3703 # delay to be used for :delay keyword
3704 delay=2
3705
3706 ## Programs to be used
3707 # Editor
3708 EDITOR='gvim -f'
3709
3710 # Browser
3711 BROWSER='chromium'
3712
3713 ## Misc settings
3714
3715 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3716 auto_enter='false'
3717 notify='false'
3718 default_autotype='user :tab pass'
3719
3720 # color of the help messages
3721 # leave empty for autodetection
3722 help_color="#4872FF"
3723
3724 # Clipboard settings
3725 # Possible options: primary, clipboard, both
3726 clip=primary
3727
3728 # Options for generating new password entries
3729 # default_user is also used for password files that have no user field.
3730 default_user=aminb
3731 default_user2=aminban
3732 password_length=30
3733
3734 # Custom Keybindings
3735 #autotype="Alt+1"
3736 autotype="Alt+m"
3737 type_user="Alt+2"
3738 type_pass="Alt+3"
3739 open_url="Alt+4"
3740 copy_name="Alt+u"
3741 copy_url="Alt+l"
3742 copy_pass="Alt+p"
3743 show="Alt+o"
3744 copy_entry="Alt+2"
3745 type_entry="Alt+1"
3746 copy_menu="Alt+c"
3747 action_menu="Alt+a"
3748 type_menu="Alt+t"
3749 help="Alt+h"
3750 switch="Alt+x"
3751 insert_pass="Alt+n"
3752 #+end_src
3753
3754 ** sway
3755 :PROPERTIES:
3756 :header-args+: :tangle ~/.config/sway/config
3757 :END:
3758
3759 #+begin_src conf
3760 exec xrdb .Xresources
3761 exec dunst
3762 ### Variables
3763 # super
3764 set $mod Mod4
3765 # alt
3766 set $mod2 Mod1
3767 set $left h
3768 set $down j
3769 set $up k
3770 set $right l
3771 set $term urxvt
3772 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3773
3774 ### Output configuration
3775 #
3776 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3777 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3778 #
3779 # Example configuration:
3780 #
3781 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
3782 #
3783 # You can get the names of your outputs by running: swaymsg -t get_outputs
3784
3785 ### Idle configuration
3786 #
3787 # Example configuration:
3788 #
3789 #exec swayidle \
3790 #    timeout 300 'swaylock -c 000000' \
3791 #    timeout 600 'swaymsg "output * dpms off"' \
3792 #       resume 'swaymsg "output * dpms on"' \
3793 #    before-sleep 'swaylock -c 000000'
3794 #
3795 # This will lock your screen after 300 seconds of inactivity, then turn off
3796 # your displays after another 600 seconds, and turn your screens back on when
3797 # resumed. It will also lock your screen before your computer goes to sleep.
3798
3799 ### Input configuration
3800
3801 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3802     dwt enabled
3803     tap enabled
3804     natural_scroll enabled
3805     middle_emulation enabled
3806     click_method clickfinger
3807 }
3808
3809 input "1:1:AT_Translated_Set_2_keyboard" {
3810     repeat_delay 200
3811     repeat_rate 45
3812     xkb_layout us,ir
3813     xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3814 }
3815
3816
3817 ### Key bindings
3818 #
3819 # Basics:
3820 #
3821     # start a terminal
3822     bindsym $mod+Return exec $term
3823
3824     # kill focused window
3825     bindsym $mod+Shift+q kill
3826
3827     # start your launcher
3828     bindsym $mod+d exec $menu
3829
3830     # password manager
3831     bindsym $mod+$mod2+space exec rofi-pass
3832
3833     # Drag floating windows by holding down $mod and left mouse button.
3834     # Resize them with right mouse button + $mod.
3835     # Despite the name, also works for non-floating windows.
3836     # Change normal to inverse to use left mouse button for resizing and right
3837     # mouse button for dragging.
3838     floating_modifier $mod normal
3839
3840     # reload the configuration file
3841     bindsym $mod+Shift+c reload
3842
3843     # exit sway (logs you out of your wayland session)
3844     bindsym $mod+Shift+e exit
3845
3846     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
3847     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
3848     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
3849
3850     bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3851     bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3852     bindsym XF86AudioMute exec pamixer --toggle-mute
3853     bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3854
3855     # original sway workspace switch and window move
3856     bindsym $mod+bracketleft workspace prev
3857     bindsym $mod+bracketright workspace next
3858     bindsym $mod+braceleft move container to workspace prev
3859     bindsym $mod+braceright move container to workspace next
3860
3861     # bspwm-esque workspace switch and window move
3862     bindsym $mod2+bracketleft exec sway-ws-util switch prev
3863     bindsym $mod2+bracketright exec sway-ws-util switch next
3864     bindsym $mod2+braceleft exec sway-ws-util move prev follow
3865     bindsym $mod2+braceright exec sway-ws-util move next follow
3866 #
3867 # Moving around:
3868 #
3869     # Move your focus around
3870     bindsym $mod+$left focus left
3871     bindsym $mod+$down focus down
3872     bindsym $mod+$up focus up
3873     bindsym $mod+$right focus right
3874     # or use $mod+[up|down|left|right]
3875     bindsym $mod+Left focus left
3876     bindsym $mod+Down focus down
3877     bindsym $mod+Up focus up
3878     bindsym $mod+Right focus right
3879
3880     # _move_ the focused window with the same, but add Shift
3881     bindsym $mod+Shift+$left move left
3882     bindsym $mod+Shift+$down move down
3883     bindsym $mod+Shift+$up move up
3884     bindsym $mod+Shift+$right move right
3885     # ditto, with arrow keys
3886     bindsym $mod+Shift+Left move left
3887     bindsym $mod+Shift+Down move down
3888     bindsym $mod+Shift+Up move up
3889     bindsym $mod+Shift+Right move right
3890 #
3891 # Workspaces:
3892 #
3893     # switch to workspace
3894     bindsym $mod+1 workspace 1
3895     bindsym $mod+2 workspace 2
3896     bindsym $mod+3 workspace 3
3897     bindsym $mod+4 workspace 4
3898     bindsym $mod+5 workspace 5
3899     bindsym $mod+6 workspace 6
3900     bindsym $mod+7 workspace 7
3901     bindsym $mod+8 workspace 8
3902     bindsym $mod+9 workspace 9
3903     bindsym $mod+0 workspace 10
3904     # move focused container to workspace
3905     bindsym $mod+Shift+1 move container to workspace 1
3906     bindsym $mod+Shift+2 move container to workspace 2
3907     bindsym $mod+Shift+3 move container to workspace 3
3908     bindsym $mod+Shift+4 move container to workspace 4
3909     bindsym $mod+Shift+5 move container to workspace 5
3910     bindsym $mod+Shift+6 move container to workspace 6
3911     bindsym $mod+Shift+7 move container to workspace 7
3912     bindsym $mod+Shift+8 move container to workspace 8
3913     bindsym $mod+Shift+9 move container to workspace 9
3914     bindsym $mod+Shift+0 move container to workspace 10
3915     # Note: workspaces can have any name you want, not just numbers.
3916     # We just use 1-10 as the default.
3917 #
3918 # Layout stuff:
3919 #
3920     # You can "split" the current object of your focus with
3921     # $mod+b or $mod+v, for horizontal and vertical splits
3922     # respectively.
3923     bindsym $mod+b splith
3924     bindsym $mod+v splitv
3925
3926     # Switch the current container between different layout styles
3927     bindsym $mod+s layout stacking
3928     bindsym $mod+w layout tabbed
3929     bindsym $mod+e layout toggle split
3930
3931     # Make the current focus fullscreen
3932     bindsym $mod+f fullscreen
3933
3934     # Toggle the current focus between tiling and floating mode
3935     bindsym $mod+Shift+space floating toggle
3936
3937     # Swap focus between the tiling area and the floating area
3938     bindsym $mod+space focus mode_toggle
3939
3940     # move focus to the parent container
3941     bindsym $mod+a focus parent
3942 #
3943 # Scratchpad:
3944 #
3945     # Sway has a "scratchpad", which is a bag of holding for windows.
3946     # You can send windows there and get them back later.
3947
3948     # Move the currently focused window to the scratchpad
3949     bindsym $mod+Shift+minus move scratchpad
3950
3951     # Show the next scratchpad window or hide the focused scratchpad window.
3952     # If there are multiple scratchpad windows, this command cycles through them.
3953     bindsym $mod+minus scratchpad show
3954 #
3955 # Resizing containers:
3956 #
3957 mode "resize" {
3958     # left will shrink the containers width
3959     # right will grow the containers width
3960     # up will shrink the containers height
3961     # down will grow the containers height
3962     bindsym $left resize shrink width 10px
3963     bindsym $down resize grow height 10px
3964     bindsym $up resize shrink height 10px
3965     bindsym $right resize grow width 10px
3966
3967     # ditto, with arrow keys
3968     bindsym Left resize shrink width 10px
3969     bindsym Down resize grow height 10px
3970     bindsym Up resize shrink height 10px
3971     bindsym Right resize grow width 10px
3972
3973     # return to default mode
3974     bindsym Return mode "default"
3975     bindsym Escape mode "default"
3976 }
3977 bindsym $mod+Shift+r mode "resize"
3978
3979 #
3980 # Status Bar:
3981 #
3982 # Read `man 5 sway-bar` for more information about this section.
3983 bar {
3984     position bottom
3985     colors {
3986         statusline #ffffff
3987         background #323232
3988         inactive_workspace #32323200 #32323200 #5c5c5c
3989     }
3990     status_command i3status
3991 }
3992
3993 include /etc/sway/config.d/*
3994 #+end_src
3995
3996 ** TLP
3997
3998 *** TODO enigma
3999 *** archy
4000
4001 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "archy")) "/sudo::/etc/default/tlp")
4002 # ------------------------------------------------------------------------------
4003 # tlp - Parameters for power saving
4004 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4005
4006 # Hint: some features are disabled by default, remove the leading # to enable
4007 # them.
4008
4009 # Set to 0 to disable, 1 to enable TLP.
4010 TLP_ENABLE=1
4011
4012 # Operation mode when no power supply can be detected: AC, BAT.
4013 # Concerns some desktop and embedded hardware only.
4014 TLP_DEFAULT_MODE=AC
4015
4016 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4017 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4018 TLP_PERSISTENT_DEFAULT=0
4019
4020 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4021 # Non-zero value enables, zero disables laptop mode.
4022 DISK_IDLE_SECS_ON_AC=0
4023 DISK_IDLE_SECS_ON_BAT=2
4024
4025 # Dirty page values (timeouts in secs).
4026 MAX_LOST_WORK_SECS_ON_AC=15
4027 MAX_LOST_WORK_SECS_ON_BAT=60
4028
4029 # Hint: CPU parameters below are disabled by default, remove the leading #
4030 # to enable them, otherwise kernel default values are used.
4031
4032 # Select a CPU frequency scaling governor.
4033 # Intel Core i processor with intel_pstate driver:
4034 #   powersave(*), performance.
4035 # Older hardware with acpi-cpufreq driver:
4036 #   ondemand(*), powersave, performance, conservative, schedutil.
4037 # (*) is recommended.
4038 # Hint: use tlp-stat -p to show the active driver and available governors.
4039 # Important:
4040 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
4041 #   efficient for *almost all* workloads and therefore kernel and most
4042 #   distributions have chosen them as defaults. If you still want to change,
4043 #   you should know what you're doing! You *must* disable your distribution's
4044 #   governor settings or conflicts will occur.
4045 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4046 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4047
4048 # Set the min/max frequency available for the scaling governor.
4049 # Possible values strongly depend on your CPU. For available frequencies see
4050 # the output of tlp-stat -p.
4051 #CPU_SCALING_MIN_FREQ_ON_AC=0
4052 #CPU_SCALING_MAX_FREQ_ON_AC=0
4053 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4054 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4055
4056 # Set energy performance hints (HWP) for Intel P-state governor:
4057 #   performance, balance_performance, default, balance_power, power
4058 # Values are given in order of increasing power saving.
4059 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4060 CPU_HWP_ON_AC=balance_performance
4061 CPU_HWP_ON_BAT=balance_power
4062
4063 # Set Intel P-state performance: 0..100 (%).
4064 # Limit the max/min P-state to control the power dissipation of the CPU.
4065 # Values are stated as a percentage of the available performance.
4066 # Requires an Intel Core i processor with intel_pstate driver.
4067 #CPU_MIN_PERF_ON_AC=0
4068 #CPU_MAX_PERF_ON_AC=100
4069 #CPU_MIN_PERF_ON_BAT=0
4070 #CPU_MAX_PERF_ON_BAT=30
4071
4072 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4073 # Requires an Intel Core i processor.
4074 # Important:
4075 # - This may conflict with your distribution's governor settings
4076 # - A value of 1 does *not* activate boosting, it just allows it
4077 #CPU_BOOST_ON_AC=1
4078 #CPU_BOOST_ON_BAT=0
4079
4080 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4081 #   0=disable, 1=enable.
4082 SCHED_POWERSAVE_ON_AC=0
4083 SCHED_POWERSAVE_ON_BAT=1
4084
4085 # Kernel NMI Watchdog:
4086 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4087 NMI_WATCHDOG=0
4088
4089 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4090 # Frequency voltage pairs are written to:
4091 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4092 # CAUTION: only use this, if you thoroughly understand what you are doing!
4093 #PHC_CONTROLS="F:V F:V F:V F:V"
4094
4095 # Set CPU performance versus energy savings policy:
4096 #   performance, balance-performance, default, balance-power, power.
4097 # Values are given in order of increasing power saving.
4098 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4099 ENERGY_PERF_POLICY_ON_AC=performance
4100 ENERGY_PERF_POLICY_ON_BAT=balance-power
4101
4102 # Disk devices; separate multiple devices with spaces (default: sda).
4103 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4104 DISK_DEVICES="sda sdb"
4105
4106 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4107 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4108 # Separate values for multiple disks with spaces. Use the special value 'keep'
4109 # to keep the hardware default for the particular disk.
4110 DISK_APM_LEVEL_ON_AC="254 254"
4111 DISK_APM_LEVEL_ON_BAT="128 128"
4112
4113 # Hard disk spin down timeout:
4114 #   0:        spin down disabled
4115 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4116 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4117 # See 'man hdparm' for details.
4118 # Separate values for multiple disks with spaces. Use the special value 'keep'
4119 # to keep the hardware default for the particular disk.
4120 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4121 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4122
4123 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4124 # Separate values for multiple disks with spaces. Use the special value 'keep'
4125 # to keep the kernel default scheduler for the particular disk.
4126 #DISK_IOSCHED="cfq cfq"
4127
4128 # AHCI link power management (ALPM) for disk devices:
4129 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4130 # (*) Kernel >= 4.15 required, then recommended.
4131 # Multiple values separated with spaces are tried sequentially until success.
4132 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4133 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4134
4135 # Exclude host devices from AHCI link power management.
4136 # Separate multiple hosts with spaces.
4137 #SATA_LINKPWR_BLACKLIST="host1"
4138
4139 # Runtime Power Management for AHCI host and disks devices:
4140 #   on=disable, auto=enable.
4141 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4142 #AHCI_RUNTIME_PM_ON_AC=on
4143 #AHCI_RUNTIME_PM_ON_BAT=on
4144
4145 # Seconds of inactivity before disk is suspended.
4146 AHCI_RUNTIME_PM_TIMEOUT=15
4147
4148 # PCI Express Active State Power Management (PCIe ASPM):
4149 #   default, performance, powersave.
4150 PCIE_ASPM_ON_AC=performance
4151 PCIE_ASPM_ON_BAT=powersave
4152
4153 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4154 # auto = mid on BAT, high on AC; default = use hardware defaults.
4155 RADEON_POWER_PROFILE_ON_AC=high
4156 RADEON_POWER_PROFILE_ON_BAT=low
4157
4158 # Radeon dynamic power management method (DPM): battery, performance.
4159 RADEON_DPM_STATE_ON_AC=performance
4160 RADEON_DPM_STATE_ON_BAT=battery
4161
4162 # Radeon DPM performance level: auto, low, high; auto is recommended.
4163 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4164 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4165
4166 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4167 WIFI_PWR_ON_AC=off
4168 WIFI_PWR_ON_BAT=on
4169
4170 # Disable wake on LAN: Y/N.
4171 WOL_DISABLE=Y
4172
4173 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4174 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4175 SOUND_POWER_SAVE_ON_AC=0
4176 SOUND_POWER_SAVE_ON_BAT=0
4177
4178 # Disable controller too (HDA only): Y/N.
4179 SOUND_POWER_SAVE_CONTROLLER=N
4180
4181 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4182 # Drive can be powered on again by releasing (and reinserting) the eject lever
4183 # or by pressing the disc eject button on newer models.
4184 # Note: an UltraBay/MediaBay hard disk is never powered off.
4185 BAY_POWEROFF_ON_AC=0
4186 BAY_POWEROFF_ON_BAT=0
4187 # Optical drive device to power off (default sr0).
4188 BAY_DEVICE="sr0"
4189
4190 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4191 RUNTIME_PM_ON_AC=on
4192 RUNTIME_PM_ON_BAT=auto
4193
4194 # Exclude PCI(e) device adresses the following list from Runtime PM
4195 # (separate with spaces). Use lspci to get the adresses (1st column).
4196 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4197 RUNTIME_PM_BLACKLIST="01:00.0"
4198
4199 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4200 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4201 # prevents accidential power-on of dGPU in hybrid graphics setups.
4202 # Use "" to disable the feature completely.
4203 # Separate multiple drivers with spaces.
4204 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4205
4206 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4207 USB_AUTOSUSPEND=1
4208
4209 # Exclude listed devices from USB autosuspend (separate with spaces).
4210 # Use lsusb to get the ids.
4211 # Note: input devices (usbhid) are excluded automatically
4212 #USB_BLACKLIST="1111:2222 3333:4444"
4213
4214 # Bluetooth devices are excluded from USB autosuspend:
4215 #   0=do not exclude, 1=exclude.
4216 USB_BLACKLIST_BTUSB=0
4217
4218 # Phone devices are excluded from USB autosuspend:
4219 #   0=do not exclude, 1=exclude (enable charging).
4220 USB_BLACKLIST_PHONE=0
4221
4222 # Printers are excluded from USB autosuspend:
4223 #   0=do not exclude, 1=exclude.
4224 USB_BLACKLIST_PRINTER=1
4225
4226 # WWAN devices are excluded from USB autosuspend:
4227 #   0=do not exclude, 1=exclude.
4228 USB_BLACKLIST_WWAN=1
4229
4230 # Include listed devices into USB autosuspend even if already excluded
4231 # by the blacklists above (separate with spaces).
4232 # Use lsusb to get the ids.
4233 #USB_WHITELIST="1111:2222 3333:4444"
4234
4235 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4236 # (workaround for USB devices that cause shutdown problems).
4237 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4238
4239 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4240 # on system startup: 0=disable, 1=enable.
4241 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4242 #   are ignored when this is enabled!
4243 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4244 RESTORE_DEVICE_STATE_ON_STARTUP=1
4245
4246 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4247 # Separate multiple devices with spaces.
4248 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4249
4250 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4251 # Separate multiple devices with spaces.
4252 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4253
4254 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4255 # (workaround for devices that are blocking shutdown).
4256 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4257
4258 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4259 # (to prevent other operating systems from missing radios).
4260 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4261
4262 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4263 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4264
4265 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4266 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4267
4268 # Radio devices to disable on battery when not in use (not connected):
4269 #   bluetooth, wifi, wwan.
4270 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4271
4272 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4273 # required). Charging starts when the remaining capacity falls below the
4274 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4275 # Main / Internal battery (values in %)
4276 #START_CHARGE_THRESH_BAT0=75
4277 #STOP_CHARGE_THRESH_BAT0=80
4278 # Ultrabay / Slice / Replaceable battery (values in %)
4279 #START_CHARGE_THRESH_BAT1=75
4280 #STOP_CHARGE_THRESH_BAT1=80
4281
4282 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4283 #RESTORE_THRESHOLDS_ON_BAT=1
4284
4285 # ------------------------------------------------------------------------------
4286 # tlp-rdw - Parameters for the radio device wizard
4287 # Possible devices: bluetooth, wifi, wwan.
4288
4289 # Hints:
4290 # - Parameters are disabled by default, remove the leading # to enable them
4291 # - Separate multiple radio devices with spaces
4292
4293 # Radio devices to disable on connect.
4294 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4295 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4296 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4297
4298 # Radio devices to enable on disconnect.
4299 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4300 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4301 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4302
4303 # Radio devices to enable/disable when docked.
4304 #DEVICES_TO_ENABLE_ON_DOCK=""
4305 #DEVICES_TO_DISABLE_ON_DOCK=""
4306
4307 # Radio devices to enable/disable when undocked.
4308 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4309 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4310 #+end_src
4311
4312 ** X
4313
4314 *** xprofile
4315 :PROPERTIES:
4316 :header-args+: :tangle ~/.xprofile
4317 :END:
4318
4319 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4320 contrary, it's automatically sourced by LightDM, my display manager of
4321 choice.
4322
4323 #+begin_src sh :tangle no
4324 xset -b  # disable bell
4325 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
4326
4327 # setxkbmap -option compose:ralt
4328
4329 setxkbmap -option ctrl:nocaps          # turn capslock into control
4330 setxkbmap -option altwin:swap_alt_win  # swap alt and super
4331
4332 if [ $(hostname) = "plasma" ]
4333 then
4334     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
4335 fi
4336
4337 if [ $(hostname) = "enigma" ]
4338 then
4339     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
4340 fi
4341
4342 light -Scrs "intel_backlight" 2
4343
4344 source $HOME/.zprofile
4345
4346 export _JAVA_AWT_WM_NONREPARENTING=1
4347 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4348
4349 if [ $(hostname) = "plasma" ]
4350 then
4351     unlock-def-gk.py &
4352 fi
4353
4354 bspwm &
4355 #+end_src
4356
4357 *** X resources
4358
4359 **** Xresources
4360 :PROPERTIES:
4361 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4362 :END:
4363
4364 #+begin_src conf-xdefaults
4365 #include ".Xresources.d/fonts"
4366 ! #include ".Xresources.d/colors"
4367 #include ".Xresources.d/emacs"
4368 #include ".Xresources.d/rxvt-unicode"
4369 #+end_src
4370
4371 **** Xresources.d
4372
4373 ***** fonts
4374 :PROPERTIES:
4375 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4376 :END:
4377
4378 #+begin_src conf-xdefaults
4379 Xft.lcdfilter: lcddefault
4380 Xft.antialias: true
4381 Xft.autohint: 0
4382 Xft.hinting: true
4383 Xft.hintstyle: hintslight
4384 ! Xft.hintstyle: hintfull
4385 Xft.rgba: rgb
4386 Xft.dpi: 96
4387 #+end_src
4388
4389 ***** colors
4390 :PROPERTIES:
4391 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4392 :END:
4393
4394 #+begin_src conf-xdefaults :tangle no
4395 #include "gruvbox-light.xresources"
4396 ! #include "gruvbox-dark.xresources"
4397 #include "gruvbox-urxvt256.xresources"
4398 #+end_src
4399
4400 #+begin_src conf-xdefaults :tangle no
4401 ! -----------------------------------------------------------------------------
4402 ! File: gruvbox-light.xresources
4403 ! Description: Retro groove colorscheme generalized
4404 ! Author: morhetz <morhetz@gmail.com>
4405 ! Source: https://github.com/morhetz/gruvbox-generalized
4406 ! Last Modified: 6 Sep 2014
4407 ! -----------------------------------------------------------------------------
4408
4409 ! hard contrast: *background: #f9f5d7
4410 *background: #fbf1c7
4411 ! soft contrast: *background: #f2e5bc
4412 *foreground: #3c3836
4413 ! Black + DarkGrey
4414 *color0:  #fdf4c1
4415 *color8:  #928374
4416 ! DarkRed + Red
4417 *color1:  #cc241d
4418 *color9:  #9d0006
4419 ! DarkGreen + Green
4420 *color2:  #98971a
4421 *color10: #79740e
4422 ! DarkYellow + Yellow
4423 *color3:  #d79921
4424 *color11: #b57614
4425 ! DarkBlue + Blue
4426 *color4:  #458588
4427 *color12: #076678
4428 ! DarkMagenta + Magenta
4429 *color5:  #b16286
4430 *color13: #8f3f71
4431 ! DarkCyan + Cyan
4432 *color6:  #689d6a
4433 *color14: #427b58
4434 ! LightGrey + White
4435 *color7:  #7c6f64
4436 *color15: #3c3836
4437 #+end_src
4438
4439 #+begin_src conf-xdefaults :tangle no
4440 ! -----------------------------------------------------------------------------
4441 ! File: gruvbox-dark.xresources
4442 ! Description: Retro groove colorscheme generalized
4443 ! Author: morhetz <morhetz@gmail.com>
4444 ! Source: https://github.com/morhetz/gruvbox-generalized
4445 ! Last Modified: 6 Sep 2014
4446 ! -----------------------------------------------------------------------------
4447
4448 ! hard contrast: *background: #1d2021
4449 *background: #282828
4450 ! soft contrast: *background: #32302f
4451 *foreground: #ebdbb2
4452 ! Black + DarkGrey
4453 *color0:  #282828
4454 *color8:  #928374
4455 ! DarkRed + Red
4456 *color1:  #cc241d
4457 *color9:  #fb4934
4458 ! DarkGreen + Green
4459 *color2:  #98971a
4460 *color10: #b8bb26
4461 ! DarkYellow + Yellow
4462 *color3:  #d79921
4463 *color11: #fabd2f
4464 ! DarkBlue + Blue
4465 *color4:  #458588
4466 *color12: #83a598
4467 ! DarkMagenta + Magenta
4468 *color5:  #b16286
4469 *color13: #d3869b
4470 ! DarkCyan + Cyan
4471 *color6:  #689d6a
4472 *color14: #8ec07c
4473 ! LightGrey + White
4474 *color7:  #a89984
4475 *color15: #ebdbb2
4476 #+end_src
4477
4478 #+begin_src conf-xdefaults :tangle no
4479 ! -----------------------------------------------------------------------------
4480 ! File: gruvbox-urxvt256.xresources
4481 ! Description: Retro groove colorscheme generalized
4482 ! Author: morhetz <morhetz@gmail.com>
4483 ! Source: https://github.com/morhetz/gruvbox-generalized
4484 ! Last Modified: 13 Dec 2013
4485 ! -----------------------------------------------------------------------------
4486
4487 URxvt.color24:  #076678
4488 URxvt.color66:  #427b58
4489 URxvt.color88:  #9d0006
4490 URxvt.color96:  #8f3f71
4491 URxvt.color100: #79740e
4492 URxvt.color108: #8ec07c
4493 URxvt.color109: #83a598
4494 URxvt.color130: #af3a03
4495 URxvt.color136: #b57614
4496 URxvt.color142: #b8bb26
4497 URxvt.color167: #fb4934
4498 URxvt.color175: #d3869b
4499 URxvt.color208: #fe8019
4500 URxvt.color214: #fabd2f
4501 URxvt.color223: #ebdbb2
4502 URxvt.color228: #f2e5bc
4503 URxvt.color229: #fbf1c7
4504 URxvt.color230: #f9f5d7
4505 URxvt.color234: #1d2021
4506 URxvt.color235: #282828
4507 URxvt.color236: #32302f
4508 URxvt.color237: #3c3836
4509 URxvt.color239: #504945
4510 URxvt.color241: #665c54
4511 URxvt.color243: #7c6f64
4512 URxvt.color244: #928374
4513 URxvt.color245: #928374
4514 URxvt.color246: #a89984
4515 URxvt.color248: #bdae93
4516 URxvt.color250: #d5c4a1
4517 #+end_src
4518
4519 ***** emacs
4520 :PROPERTIES:
4521 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4522 :END:
4523
4524 #+begin_src conf-xdefaults
4525 Emacs.menuBar: off
4526 Emacs.toolBar: off
4527 Emacs.verticalScrollBars: off
4528 Emacs.cursorBlink: off
4529 Emacs.FontBackend: xft,x
4530 ! Emacs.font: Ubuntu Mono-12
4531 ! Emacs.font: Triplicate T4C-11
4532 ! Emacs.font: Ubuntu Mono-10.5
4533 ! Emacs.font: Ubuntu Mono-12
4534 ! Emacs.font: Iosevka-11
4535
4536 ! Emacs.font: Fira Mono:size=15
4537 ! Emacs.font: DejaVu Sans Mono:size=15
4538 ! Emacs.font: Inconsolata:size=17
4539 ! Emacs.font: Inconsolata:size=16
4540 ! Emacs.font: Inconsolata LGC:size=14
4541 ! Emacs.font: Source Code Pro Medium-10.5
4542 Emacs.font: Ubuntu Mono:size=16
4543 ! Emacs.font: Iosevka:size=16
4544 #+end_src
4545
4546 ***** rxvt-unicode
4547 :PROPERTIES:
4548 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4549 :END:
4550
4551 #+begin_src conf-xdefaults
4552 ! Font
4553 URxvt.font:             xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4554 URxvt.boldFont:         xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4555 URxvt.italicFont:       xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4556 URxvt.bolditalicFont:   xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4557
4558 URxvt.xftAntialias:     true
4559 URxvt.letterSpace:      0
4560
4561 URxvt.depth:                0
4562 URxvt.loginShell:           true
4563 URxvt.saveLines:            100000
4564 URxvt.internalBorder:       3
4565 URxvt.lineSpace:            0
4566 URxvt.scrollBar:            false
4567 URxvt.scrollStyle:          rxvt
4568 URxvt*scrollTtyOutput:      false
4569 URxvt*scrollWithBuffer:     true
4570 URxvt*scrollTtyKeypress:    true
4571 URxvt.keysym.Shift-Up:      command:\033]720;1\007
4572 URxvt.keysym.Shift-Down:    command:\033]721;1\007
4573
4574 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
4575 URxvt.perl-ext:             bidi
4576 URxvt.bidi.enabled:         1
4577 URxvt.url-select.launcher:  firefox
4578 URxvt.url-select.underline: true
4579 URxvt.keysym.M-u:           perl:url-select:select_next
4580 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
4581 URxvt.keysym.M-s:           perl:keyboard-select:search
4582 URxvt.url-launcher:         /usr/bin/firefox
4583 URxvt.matcher.button:       1
4584 URxvt.iso14755:             false
4585 URxvt.iso14755_53:          false
4586 URxvt.keysym.M-c:           perl:clipboard:copy
4587 URxvt.keysym.M-v:           perl:clipboard:paste
4588 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
4589 URxvt.keysym.C-Up:          font-size:increase
4590 URxvt.keysym.C-Down:        font-size:decrease
4591 URxvt.keysym.C-S-Up:        font-size:incglobal
4592 URxvt.keysym.C-S-Down:      font-size:decglobal
4593 URxvt.keysym.C-equal:       font-size:reset
4594 !URxvt.keysym.C-question:   font-size:show
4595
4596 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4597
4598 !urxvt*foreground: white
4599 !urxvt*background: black
4600
4601 !*color0:  #2E3436
4602 !*color1:  #a40000
4603 !*color2:  #4E9A06
4604 !*color3:  #C4A000
4605 !*color4:  #3465A4
4606 !*color5:  #75507B
4607 !*color6:  #ce5c00
4608 !*color7:  #babdb9
4609 !*color8:  #555753
4610 !*color9:  #EF2929
4611 !*color10: #8AE234
4612 !*color11: #FCE94F
4613 !*color12: #729FCF
4614 !*color13: #AD7FA8
4615 !*color14: #fcaf3e
4616 !*color15: #EEEEEC
4617
4618 !URxvt.foreground: #C8C8C8
4619 !URxvt.background: #FFFFFF
4620
4621 !! black
4622 !*color0:  #2E3436
4623 !*color8:  #555753
4624 !! red
4625 !*color1:  #a40000
4626 !*color9:  #EF2929
4627 !! green
4628 !*color2:  #4E9A06
4629 !*color10: #8AE234
4630 !! yellow
4631 !*color3:  #C4A000
4632 !*color11: #FCE94F
4633 !! blue
4634 !*color4:  #3465A4
4635 !*color12: #729FCF
4636 !! purple
4637 !*color5:  #75507B
4638 !*color13: #AD7FA8
4639 !! orange (replaces cyan)
4640 !*color6:  #ce5c00
4641 !*color14: #fcaf3e
4642 !! white
4643 !*color7:  #babdb9
4644 !*color15: #EEEEEC
4645
4646 ! Tango colour theme for rxvt-unicode
4647 URxvt.background: #FFFFFF
4648 URxvt.foreground: #000000
4649
4650 ! Black
4651 URxvt.color0: #2E3436
4652 URxvt.color8: #757773
4653
4654 ! Red
4655 URxvt.color1: #CC0000
4656 URxvt.color9: #EF2929
4657
4658 ! Green
4659 URxvt.color2: #4E9A06
4660 URxvt.color10: #8AE234
4661
4662 ! Yellow
4663 URxvt.color3: #C4A000
4664 URxvt.color11: #FCE94F
4665
4666 ! Blue
4667 URxvt.color4: #3465A4
4668 URxvt.color12: #729FCF
4669
4670 ! Magenta
4671 URxvt.color5: #75507B
4672 URxvt.color13: #AD7FA8
4673
4674 !! Cyan
4675 !URxvt.color6: #06989A
4676 !URxvt.color14: #34E2E2
4677 ! orange (replaces cyan)
4678 *color6:  #ce5c00
4679 *color14: #fcaf3e
4680
4681 ! White
4682 URxvt.color7: #D3D7CF
4683 URxvt.color15: #EEEEEC
4684 #+end_src
4685
4686 ** XDG
4687 :PROPERTIES:
4688 :header-args+: :tangle ~/.config/user-dirs.dirs
4689 :END:
4690
4691 #+begin_src conf
4692 XDG_DESKTOP_DIR="$HOME/Desktop"
4693 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4694 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4695 XDG_MUSIC_DIR="$HOME/usr/music"
4696 XDG_PICTURES_DIR="$HOME/usr/pics"
4697 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4698 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4699 XDG_VIDEOS_DIR="$HOME/usr/vids"
4700 #+end_src
4701
4702 ** Zathura
4703 :PROPERTIES:
4704 :header-args+: :tangle ~/.config/zathura/zathurarc
4705 :END:
4706
4707 #+begin_src conf
4708 set smooth-scroll true
4709 set selection-clipboard clipboard
4710 set zoom-step 05
4711 set default-bg "#272727"
4712 set statusbar-bg "#272727"
4713 set inputbar-bg "#373737"
4714 #+end_src
4715
4716 ** Zsh
4717
4718 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4719 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4720 installed.
4721
4722 *** zimrc
4723 :PROPERTIES:
4724 :header-args+: :tangle ~/.zimrc
4725 :END:
4726
4727 #+begin_src sh
4728
4729
4730 #################
4731 # CORE SETTINGS #
4732 #################
4733
4734 #
4735 # Zim settings
4736 #
4737
4738 # Select what modules you would like enabled.
4739 # The second line of modules may depend on options set by modules in the first
4740 # line. These dependencies are noted on the respective module's README.md.
4741 zmodules=(directory environment git git-info history input ssh utility custom \
4742           syntax-highlighting history-substring-search prompt completion)
4743
4744
4745 ###################
4746 # MODULE SETTINGS #
4747 ###################
4748
4749 #
4750 # Prompt
4751 #
4752
4753 # Set your desired prompt here
4754 zprompt_theme='pure'
4755 #PURE_PROMPT_SYMBOL=λ
4756 #PURE_PROMPT_SYMBOL=δ
4757 PURE_PROMPT_SYMBOL=➜
4758
4759 #
4760 # Completion
4761 #
4762
4763 # set an optional host-specific filename for the completion cache file
4764 # if none is provided, the default '.zcompdump' is used.
4765 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4766
4767 #
4768 # Utility
4769 #
4770
4771 # Uncomment to enable command correction prompts
4772 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4773 setopt CORRECT
4774
4775 #
4776 # Environment
4777 #
4778
4779 # Set the string below to the desired terminal title format string.
4780 # The terminal title is redrawn upon directory change, however, variables like
4781 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4782 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4783 # The example below uses the following format: 'username@host:/current/directory'
4784 ztermtitle='%n@%m:%~'
4785
4786 #
4787 # Input
4788 #
4789
4790 # Uncomment to enable double-dot expansion.
4791 # This appends '../' to your input for each '.' you type after an initial '..'
4792 #zdouble_dot_expand='true'
4793
4794 #
4795 # Syntax-Highlighting
4796 #
4797
4798 # This determines what highlighters will be used with the syntax-highlighting module.
4799 # Documentation of the highlighters can be found here:
4800 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4801 # For (u)rxvt, termite and gnome-terminal users,
4802 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4803 #zhighlighters=(main brackets cursor)
4804 zhighlighters=(main brackets pattern)
4805
4806
4807 #
4808 # SSH
4809 #
4810
4811 # Load these ssh identities with the ssh module
4812 zssh_ids=(id_ed25519_amin)
4813
4814
4815 #
4816 # Pacman
4817 #
4818
4819 # Set (optional) pacman front-end.
4820 zpacman_frontend='yay'
4821
4822 # Load any helper scripts as defined here
4823 #zpacman_helper=(aur)
4824 #+end_src
4825
4826 *** zlogin
4827 :PROPERTIES:
4828 :header-args+: :tangle ~/.zlogin
4829 :END:
4830
4831 #+begin_src sh
4832
4833
4834 #
4835 # User configuration sourced by login shells
4836 #
4837
4838 # Initialize zim
4839 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4840 #+end_src
4841
4842 *** zprofile
4843 :PROPERTIES:
4844 :header-args+: :tangle ~/.zprofile
4845 :END:
4846
4847 #+begin_src sh
4848 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4849 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4850 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4851 export XDG_CONFIG_HOME=$HOME/.config
4852 export XDG_DATA_HOME=$HOME/.local/share
4853 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4854 export MAILDIR="$HOME/mail"
4855 export CVS_RSH=ssh
4856 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4857 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4858 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4859
4860 # Eiffel2Java stuff
4861 #export JAVA_HOME=/usr/lib/jvm/default
4862 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4863 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4864 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4865
4866 #export PATH="$HOME/usr/build/pvs:$PATH"
4867 #export SBCLISP_HOME=/usr/share/sbcl-source
4868 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4869
4870 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
4871
4872 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4873 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4874
4875 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4876 #+end_src
4877
4878 *** zshenv
4879 :PROPERTIES:
4880 :header-args+: :tangle ~/.zshenv
4881 :END:
4882
4883 #+begin_src sh
4884 # Ensure that a non-login, non-interactive shell has a defined environment.
4885 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4886   source "${ZDOTDIR:-$HOME}/.zprofile"
4887 fi
4888 #+end_src
4889
4890 *** zshrc
4891 :PROPERTIES:
4892 :header-args+: :tangle ~/.zshrc
4893 :END:
4894
4895 #+begin_src sh
4896 # Bash-like navigation
4897 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4898 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4899 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4900 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4901
4902 #disable -r time       # disable shell reserved word
4903 #alias time='time -p'  # -p for POSIX output
4904
4905 # rehash if last command was pacaur or pacman
4906 # (so that zsh picks up changes in $PATH immediately)
4907 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4908
4909 #
4910 # User configuration sourced by interactive shells
4911 #
4912
4913 # Change default zim location
4914 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4915
4916 # Start zim
4917 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4918
4919 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4920 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4921
4922 setopt globdots
4923
4924 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4925 source ~/.zsh/zsh-autopair/autopair.zsh
4926
4927
4928 ### fzf ###
4929
4930 source /usr/share/fzf/key-bindings.zsh
4931 source /usr/share/fzf/completion.zsh
4932
4933 # Accept history selection instead of putting it on
4934 # the command line
4935 fzf-history-widget-accept() {
4936   fzf-history-widget
4937   zle accept-line
4938 }
4939 #zle     -N   fzf-history-widget-accept
4940 #bindkey '^R' fzf-history-widget-accept
4941
4942 # alt+c preview
4943 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4944
4945 ### fzf ###
4946
4947
4948 # aliases
4949 alias mpv="mpv --ytdl-format mp4"
4950 alias mv="mv -iv"
4951 alias cp="cp -iv"
4952 alias scl=systemctl
4953 alias jcl=journalctl
4954 alias m="mbsync -Va; getmail; notmuch new"
4955 alias best="youtube-dl -f best"
4956 alias nixx="ssh amin@nix.aminb.org"
4957 alias fence="ssh aminb@fencepost.gnu.org"
4958
4959 aur() {
4960    cd ~/usr/build
4961    git clone https://aur.archlinux.org/${1}.git
4962    cd ${1}
4963 }
4964
4965 # i-beam cursor
4966 echo -e "\033[5 q"
4967 #echo -e "\033[6 q"
4968 #+end_src
4969
4970 * Scripts
4971
4972 This section contains various useful scripts and the ones used by the
4973 programs above. For instance, =toggle-tablet= for switching to and
4974 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4975 Xfce's presentation mode which keeps the screen awake, and
4976 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4977 exact brightness value.
4978
4979 ** battery-percentage-time
4980 :PROPERTIES:
4981 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
4982 :END:
4983
4984 #+begin_src sh :tangle no
4985 dbus_send() {
4986         label=$1
4987         dbus-send --print-reply=literal --system \
4988                 --dest=org.freedesktop.UPower \
4989                 /org/freedesktop/UPower/devices/battery_BAT0 \
4990                 org.freedesktop.DBus.Properties.Get \
4991                 string:org.freedesktop.UPower.Device \
4992                 string:"${label}" | awk '{print $3}'
4993 }
4994
4995 perc=$(dbus_send 'Percentage')
4996 state=$(dbus_send 'State')
4997
4998 if [ "$state" -eq 2 ]; then  # Discharging
4999         secs=$(dbus_send 'TimeToEmpty')
5000 elif [ "$state" -eq 1 ]; then  # Charging
5001         secs=$(dbus_send 'TimeToFull')
5002 fi
5003
5004 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5005 #+end_src
5006
5007 ** rofi-light
5008 :PROPERTIES:
5009 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5010 :END:
5011
5012 #+begin_src bash
5013 cur=$(light -G)
5014 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
5015 light -S $val
5016 #+end_src
5017
5018 ** s (run sway)
5019 :PROPERTIES:
5020 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5021 :END:
5022
5023 #+begin_src bash
5024 export _JAVA_AWT_WM_NONREPARENTING=1
5025 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5026 light -Scrs "intel_backlight" 2
5027 source $HOME/.zprofile
5028 sway
5029 #+end_src
5030
5031 ** sway-ws-util
5032 :PROPERTIES:
5033 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5034 :END:
5035
5036 #+begin_src bash
5037 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5038 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5039 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5040 dest_ws=-1
5041 op=-1
5042
5043 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5044   op="$1"
5045   if [ "$2" = "prev" ]; then
5046     dest_ws="$prev_ws"
5047   elif [ "$2" = "next" ]; then
5048     dest_ws="$next_ws"
5049   else
5050     echo "Usage: $0 $1 {prev|next} [follow]"
5051     exit 1
5052   fi
5053 else
5054   echo "Usage: $0 {switch|move} {prev|next} [follow]"
5055   exit 1
5056 fi
5057
5058 if [ "$op" = "switch" ]; then
5059   sway workspace "$dest_ws"
5060 elif [ "$op" = "move" ]; then
5061   sway move container to workspace "$dest_ws"
5062   if [ "$3" = "follow" ]; then
5063     sway workspace "$dest_ws"
5064   fi
5065 fi
5066 #+end_src
5067
5068 ** toggle-layout
5069 :PROPERTIES:
5070 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5071 :END:
5072
5073 #+begin_src bash :tangle no
5074 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5075
5076 if [ "$lang" = "us" ]; then
5077     setxkbmap ir
5078 else
5079     setxkbmap us
5080     # xmodmap $HOME/.Xmodmap
5081 fi
5082 #+end_src
5083
5084 ** toggle-presentation-mode
5085 :PROPERTIES:
5086 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5087 :END:
5088
5089 #+begin_src bash :tangle no
5090 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5091 #+end_src
5092
5093 ** toggle-tablet
5094 :PROPERTIES:
5095 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5096 :END:
5097
5098 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5099 a few things:
5100
5101 - rotates the screen using =xrandr=, so that rotating the physical
5102   display of my X220t would have the laptop's battery on the right
5103   hand side,
5104 - enables touch screen,
5105 - properly rotates the stylus pen and touch screen pointers, and
5106 - toggles between RGB and Vertical BGR sub-pixel order.
5107
5108 #+begin_src bash :tangle no
5109 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5110     0)  # Screen is not rotated, we should rotate it right (90°)
5111            xrandr -o 3
5112            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5113            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5114            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5115            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5116            ;;
5117     1)  # Currently top is rotated right, we should set it normal (0°)
5118           xrandr -o 0
5119           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5120           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5121           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5122           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5123           ;;
5124     *)
5125            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5126            exit 1
5127            ;;
5128 esac
5129 #+end_src
5130
5131 ** unlock-def-gk.py
5132 :PROPERTIES:
5133 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5134 :END:
5135
5136 #+begin_src python :tangle no
5137 import gnomekeyring as gk
5138 # list_item_ids_sync('login')[0] == 1L
5139 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5140 #+end_src
5141
5142 ** volume-info
5143 :PROPERTIES:
5144 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5145 :END:
5146
5147 #+begin_src sh :tangle no
5148 cur_vol=$(pamixer --get-volume)
5149
5150 if [ $(pamixer --get-mute) = true ]; then
5151   printf 'mt \n' "$cur_vol"
5152 else
5153   printf '%02d \n' "$cur_vol"
5154 fi
5155 #+end_src
5156
5157 ** wp
5158
5159 My little wallpaper changer script.
5160
5161 *** wp
5162 :PROPERTIES:
5163 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5164 :END:
5165
5166 #+begin_src bash :tangle no
5167 export DISPLAY=:0
5168
5169 case "$1" in
5170   "day")
5171     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5172     ;;
5173   "night")
5174     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5175     ;;
5176   *)
5177     echo $"Usage: $0 {day|night}"
5178     exit 1
5179 esac
5180 #+end_src
5181
5182 *** wp-auto
5183 :PROPERTIES:
5184 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5185 :END:
5186
5187 #+begin_src bash :tangle no
5188 SED=$(which sed)
5189 ROFI=$(which rofi)
5190
5191 export DISPLAY=:0
5192 HOUR=$(date +%H)
5193
5194 if [ -z "${SED}" ]
5195 then
5196     echo "Did not find 'sed', script cannot continue."
5197     exit 1
5198 fi
5199 if [ -z "${ROFI}" ]
5200 then
5201     echo "Did not find rofi, there is no point to continue."
5202     exit 1
5203 fi
5204
5205 ###
5206 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5207 # Repeated calls should leave the config clean-ish
5208 ###
5209 function set_theme()
5210 {
5211     CDIR="${HOME}/.config/rofi/"
5212     if [ ! -d "${CDIR}" ]
5213     then
5214         mkdir -p ${CDIR}
5215     fi
5216     if [ -f "${CDIR}/config" ]
5217     then
5218         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5219     fi
5220     echo "rofi.theme: ${1}" >> "${CDIR}/config"
5221
5222 }
5223
5224 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5225     then
5226         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5227         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5228         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5229     else
5230         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5231         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5232         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5233 fi
5234 #+end_src
5235
5236 *** wp.service
5237 :PROPERTIES:
5238 :header-args+: :tangle ~/.config/systemd/user/wp.service
5239 :END:
5240
5241 #+begin_src conf :tangle no
5242 [Unit]
5243 Description=wallpaper service
5244
5245 [Service]
5246 Type=oneshot
5247 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5248 #+end_src
5249
5250 *** wp.timer
5251 :PROPERTIES:
5252 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5253 :END:
5254
5255 #+begin_src conf :tangle no
5256 [Unit]
5257 [Unit]
5258 Description=wallpaper timer
5259
5260 [Timer]
5261 OnCalendar=07,21:00
5262 Unit=wp.service
5263 Persistent=true
5264
5265 [Install]
5266 WantedBy=timers.target
5267 #+end_src
5268
5269 ** zathura-sync.sh
5270 :PROPERTIES:
5271 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5272 :END:
5273
5274 #+begin_src sh
5275 pos="$1"
5276 pdffile="$2"
5277 zathura --synctex-forward "$pos" "$pdffile" || \
5278     (
5279     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5280     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5281 #+end_src
5282 ** Fun :)
5283
5284 *** eat-em
5285 :PROPERTIES:
5286 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5287 :END:
5288
5289 #+begin_src sh
5290 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5291 # [ESC] character in original post removed here.
5292
5293 # ANSI Color -- use these variables to easily have different color
5294 #    and format output. Make sure to output the reset sequence after
5295 #    colors (f = foreground, b = background), and use the 'off'
5296 #    feature for anything you turn on.
5297
5298 initializeANSI()
5299 {
5300  esc="$(echo -en '\e')"
5301
5302   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
5303   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
5304   cyanf="${esc}[36m";    whitef="${esc}[37m"
5305
5306   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
5307   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
5308   cyanb="${esc}[46m";    whiteb="${esc}[47m"
5309
5310   boldon="${esc}[1m";    boldoff="${esc}[22m"
5311   italicson="${esc}[3m"; italicsoff="${esc}[23m"
5312   ulon="${esc}[4m";      uloff="${esc}[24m"
5313   invon="${esc}[7m";     invoff="${esc}[27m"
5314
5315   reset="${esc}[0m"
5316 }
5317
5318 # note in this first use that switching colors doesn't require a reset
5319 # first - the new color overrides the old one.
5320
5321 #clear
5322
5323 initializeANSI
5324
5325 cat << EOF
5326
5327  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
5328  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5329  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5330  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
5331  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
5332  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
5333
5334  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
5335  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5336  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5337  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
5338  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
5339  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
5340
5341 EOF
5342 #+end_src
5343
5344 *** invade-em
5345 :PROPERTIES:
5346 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5347 :END:
5348
5349 #+begin_src bash
5350 #
5351 # ANSI color scheme script featuring Space Invaders
5352 #
5353 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5354 # Modified by lolilolicon
5355 #
5356
5357 f=3 b=4
5358 for j in f b; do
5359   for i in {0..7}; do
5360     printf -v $j$i %b "\e[${!j}${i}m"
5361   done
5362 done
5363 bld=$'\e[1m'
5364 rst=$'\e[0m'
5365
5366 cat << EOF
5367
5368  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5369  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5370  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
5371  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
5372
5373  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5374  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5375  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
5376  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
5377
5378
5379                                      $f7▌$rst
5380
5381                                    $f7▌$rst
5382
5383                               $f7    ▄█▄    $rst
5384                               $f7▄█████████▄$rst
5385                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5386
5387 EOF
5388 #+end_src