[emacs] assimilate pdf-tools and deps
[~bandali/configs] / rc.org
1 #+title: rc.org
2 #+property: header-args :comments link :mkdirp yes :results silent
3
4 * About
5
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
9
10 Note: This file is best viewed inside Emacs with org mode.
11
12 * Configs
13
14 This section contains the configuration files (dotfiles) of various
15 programs I use.
16
17 ** bspwm
18
19 *** bspwmrc
20 :PROPERTIES:
21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22 :END:
23
24 #+begin_src sh :tangle no
25 sxhkd &
26 sh ~/.fehbg &
27 xfce4-panel -d &
28 compton &
29 sleep 0.5 && pasystray --notify=all &
30
31 bspc monitor -d I II III IV V VI VII VIII IX X
32 #bspc monitor eDP-1 -d I II III IV V
33 #bspc monitor HDMI-1 -d VI VII VIII IX X
34
35 #bspc config border_width 2
36 #bspc config window_gap 8
37 bspc config window_gap 0
38
39 bspc config bottom_padding 26
40
41 bspc config split_ratio 0.52
42 bspc config borderless_monocle true
43 bspc config gapless_monocle true
44 bspc config click_to_focus button1
45 bspc config directional_focus_tightness low
46
47 #bspc rule -a Firefox desktop='^1' follow=on
48 bspc rule -a Nightly desktop='^1' follow=on
49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
50 #bspc rule -a Chromium desktop='^4' follow=on
51 bspc rule -a URxvt state=floating
52 bspc rule -a URxvt:tiled state=tiled
53 bspc rule -a Connman-gtk state=floating
54 bspc rule -a Xfce4-panel state=floating
55 bspc rule -a TelegramDesktop state=floating
56 bspc rule -a Ec state=floating
57 bspc rule -a Pavucontrol state=floating
58 bspc rule -a Eog state=floating
59 bspc rule -a Seahorse state=floating
60 bspc rule -a mpv state=floating
61 bspc rule -a Evince state=floating
62 bspc rule -a Meld state=floating
63 bspc rule -a Autokey-gtk state=floating
64 bspc rule -a Mousepad state=floating
65 bspc rule -a Wrapper-1.0 state=floating
66 bspc rule -a File-roller state=floating
67 bspc rule -a Gnome-disks state=floating
68 bspc rule -a Termite state=floating
69 bspc rule -a Termite:tiled state=tiled
70 bspc rule -a Thunderbird:Calendar state=floating
71 bspc rule -a Audacity state=floating
72 bspc rule -a Proof state=floating # pvs x-show-proof
73 bspc rule -a Nm-connection-editor state=floating
74 bspc rule -a Wire state=floating
75 bspc rule -a discord state=floating
76 bspc rule -a X2goclient state=floating
77 bspc rule -a SimpleScreenRecorder state=floating
78 bspc rule -a Gimp state=floating
79 bspc rule -a Wrapper-2.0 state=floating
80 bspc rule -a Zathura state=tiled
81 #+end_src
82
83 *** sxhkdrc
84 :PROPERTIES:
85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86 :END:
87
88 #+begin_src conf :tangle no
89 #
90 # wm independent hotkeys
91 #
92
93 # terminal emulator
94 super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97 #super + {_,shift} + Return
98 # termite{_, --name=tiled}
99
100 # program launcher
101 super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104 super + alt + space
105 xfce4-popup-whiskermenu
106
107 # window finder
108 super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111 # password manager
112 alt + space
113 rofi-pass
114
115 # firefox
116 #super + r
117 # firefox
118
119 # chromium
120 #super + c
121 # chromium -incognito
122
123 # emacs
124 super + e
125 emacs
126
127 # make sxhkd reload its configuration files:
128 super + Escape
129 pkill -USR1 -x sxhkd
130
131 # volume {up,down}
132 XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135 # mute
136 XF86AudioMute
137 pamixer --toggle-mute
138
139 XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142 # playback control
143 XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146 # lock the screen
147 super + shift + q
148 light-locker-command -l
149
150 # Toggle keyboard layout
151 super + F7
152 toggle-layout
153
154 # Toggle Xfce presentation mode
155 XF86LaunchB
156 toggle-presentation-mode
157
158 # monitor brightness
159 XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162 super + apostrophe
163 rofi-light
164
165 # keyboard brightness
166 #XF86KbdBrightness{Up,Down}
167 # kbdlight {up,down}
168
169 XF86RotateWindows
170 toggle-tablet
171
172 #
173 # bspwm hotkeys
174 #
175
176 # quit bspwm normally
177 super + alt + Escape
178 bspc quit
179
180 # close and kill
181 super + {w,q}
182 bspc node -{c,k}
183
184 # alternate between the tiled and monocle layout
185 super + m
186 bspc desktop -l next
187
188 # send the newest marked node to the newest preselected node
189 super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192 # swap the current node and the biggest node
193 super + g
194 bspc node -s biggest
195
196 #
197 # state/flags
198 #
199
200 # set the window state
201 super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204 # set the node flags
205 super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208 #
209 # focus/swap
210 #
211
212 # focus the node in the given direction
213 super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216 # focus the node for the given path jump
217 super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220 # focus the next/previous node in the current desktop
221 super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224 # focus the next/previous desktop in the current monitor
225 super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228 # send to next/prev desktop
229 super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232 # focus the last node/desktop
233 super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236 # focus the older or newer node in the focus history
237 super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242 # focus or send to the given desktop
243 super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246 #
247 # preselect
248 #
249
250 # preselect the direction
251 super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254 # preselect the ratio
255 super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258 # cancel the preselection for the focused node
259 super + ctrl + space
260 bspc node -p cancel
261
262 # cancel the preselection for the focused desktop
263 super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266 #
267 # move/resize
268 #
269
270 # expand a window by moving one of its side outward
271 super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274 # contract a window by moving one of its side inward
275 super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278 # move a floating window
279 super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282 #alt + bracket{left,right}
283 # xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284 #+end_src
285
286 ** compton
287 :PROPERTIES:
288 :header-args+: :tangle ~/.config/compton.conf
289 :END:
290
291 #+begin_src conf :tangle no
292 # Shadow
293 shadow = false; # Enabled client-side shadows on windows.
294 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295 no-dnd-shadow = true; # Don't draw shadows on DND windows.
296 clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298 shadow-radius = 5; # The blur radius for shadows. (default 12)
299 shadow-offset-x = -5; # The left offset for shadows. (default -15)
300 shadow-offset-y = -5; # The top offset for shadows. (default -15)
301 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306 # shadow-exclude = "n:e:Notification";
307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311 # Opacity
312 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323 # blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326 # blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332 # Fading
333 fading = false; # Fade windows during opacity changes.
334 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338 fade-exclude = [ ]; # Exclude conditions for fading.
339
340 # Other
341 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355 dbe = false; # Enable DBE painting mode. Rarely needed.
356 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368 # GLX backend # GLX backend fine-tune options. See man page for more info.
369 glx-no-stencil = true; # Recommended.
370 glx-copy-from-front = false; # Useful with --glx-swap-method,
371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372 # glx-no-rebind-pixmap = true; # Recommended if it works.
373 glx-no-rebind-pixmap = true; # Recommended if it works.
374 #glx-swap-method = "4"; # See man page.
375 glx-swap-method = "4"; # See man page.
376
377 # Window type settings
378 wintypes:
379 {
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389 };
390 #+end_src
391
392 ** Dunst
393 :PROPERTIES:
394 :header-args+: :tangle ~/.config/dunst/dunstrc
395 :END:
396
397 #+begin_src conf
398 [global]
399 #font = Ubuntu Mono 10.5
400 font = Inconsolata 11
401
402 # Path to default icons.
403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405 icon_position = left
406 # <b>bold</b>
407 # <i>italic</i>
408 # <s>strikethrough<s/>
409 # <u>underline</u>
410 markup = full
411 # The format of the message. Possible variables are:
412 # %a appname
413 # %s summary
414 # %b body
415 # %i iconname (including its path)
416 # %I iconname (without its path)
417 # %p progress value if set ([ 0%] to [100%]) or nothing
418 # Markup is allowed
419 format = "<b>%s</b>\n%b"
420 # Sort messages by urgency
421 sort = yes
422 # Show how many messages are currently hidden (because of geometry)
423 indicate_hiddenl= no
424 # Alignment of message text.
425 # Possible values are "left", "center" and "right"
426 alignment = center
427 # The frequency with wich text that is longer than the notification
428 # window allows bounces back and forth.
429 # This option conflicts with 'word_wrap'.
430 # Set to 0 to disable
431 bounce_freq = 3
432 # show age of message if message is older than show_age_threshold seconds.
433 # set to -1 to disable
434 show_age_threshold = -1
435 # split notifications into multiple lines if they don't fit into geometry
436 word_wrap = yes
437 # ignore newlines '\n' in notifications
438 ignore_newline = no
439 # The geometry of the message window.
440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
441 # The height is measured in number of notifications everything else in pixels. If the width
442 # is omitted but the height is given ("-geometry x2"), the message window
443 # expands over the whole screen (dmenu-like). If width is 0,
444 # the window expands to the longest message displayed.
445 # A positive x is measured from the left, a negative from the
446 # right side of the screen. Y is measured from the top and down respectevly.
447 # The width can be negative. In this case the actual width is the
448 # screen width minus the width defined in within the geometry option.
449 #geometry = "410x12-12+12"
450 #geometry = "0x0-30-30"
451 geometry = "260x12-30-30"
452 # The transparency of the window. range: [0; 100]
453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454 transparency = 0
455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
456 # for longer than idle_threshold seconds.
457 # Set to 0 to disable.
458 idle_threshold = 120
459 # Which monitor should the notifications be displayed on.
460 monitor = 0
461 # Display notification on focused monitor. Possible modes are:
462 # mouse: follow mouse pointer
463 # keyboard: follow window with keyboard focus
464 # none: don't follow anything
465 #
466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467 # This should be the case for almost all modern windowmanagers.
468 #
469 # If this option is set to mouse or keyboard, the monitor option will be
470 # ignored.
471 follow = keyboard
472 # should a notification popped up from history be sticky or
473 # timeout as if it would normally do.
474 sticky_history = yes
475 # The height of a single line. If the height is smaller than the font height,
476 # it will get raised to the font height.
477 # This adds empty space above and under the text.
478 line_height = 0
479
480 show_indicators = yes
481
482 # Draw a line of 'separatpr_height' pixel height between two notifications.
483 # Set to 0 to disable
484 separator_height = 3
485 # padding between text and separator
486 padding = 8
487 # horizontal padding
488 horizontal_padding = 8
489 # Define a color for the separator.
490 # possible values are:
491 # * auto: dunst tries to find a color fitting to the background
492 # * foreground: use the same color as the foreground
493 # * frame: use the same color as the frame.
494 # * anything else will be interpreted as a X color
495 separator_color = foreground
496 # print a notification on startup
497 # This is mainly for error detection, since dbus (re-)starts dunst
498 # automatically after a crash.
499 startup_notification = false
500 # dmenu path
501 #dmenu = /usr/bin/dmenu -p dunst:
502 dmenu = /usr/bin/rofi -dmenu -p dunst:
503 # browser for opening urls in context menu
504 browser = /usr/bin/firefox -new-tab
505 [frame]
506 width = 0
507 color = "#377222"
508 [shortcuts]
509 # shortcuts are specified as [modifier+][modifier+]...key
510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511 # and 'mod4' (windows-key)
512 # xev might be helpful to find names for keys
513 # close notification
514 close = ctrl+space
515 # close all notifications
516 close_all = ctrl+shift+space
517 # redisplay last message(s)
518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519 history = ctrl+shift+h
520 # context menu
521 context = ctrl+shift+period
522 [urgency_low]
523 # IMPORTANT: colors have to be defined in quotation marks.
524 # Otherwise the '#' and following would be interpreted as a comment.
525 background = "#1d2a30"
526 foreground = "#71c2af"
527 timeout = 3
528 [urgency_normal]
529 background = "#1d2a30"
530 foreground = "#71c2af"
531 timeout = 0
532 [urgency_critical]
533 background = "#1d2a30"
534 foreground = "#ff9982"
535 timeout = 0
536
537 # Every section that isn't one of the above is interpreted as a rules
538 # to override settings for certain messages.
539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
541 # and 'format'.
542 # Shell-like globbing will get expanded.
543 #
544 # SCRIPTING
545 # you can specify a script that gets run when the rule matches by setting
546 # the 'script' option.
547 # The script will be called as follows:
548 # script appname summary body icon urgency
549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
550 #
551 # NOTE: if you don't want a notification to be displayed, set the format to ""
552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
553 # fitting options for rules.
554 #[espeak]
555 # summary = "*"
556 # script = dunst_espeak.sh
557 #[script-test]
558 # summary = "*script*"
559 # script = dunst_test.sh
560 #[ignore]
561 ## This notification will not be displayed
562 # summary = "foobar"
563 # format = ""
564 #[signed_on]
565 # appname = Pidgin
566 # summary = "*signed on*"
567 # urgency = low
568 #
569 #[signed_off]
570 # appname = Pidgin
571 # summary = *signed off*
572 # urgency = low
573 #
574 #[says]
575 # appname = Pidgin
576 # summary = *says*
577 # urgency = critical
578 #
579 #[twitter]
580 # appname = Pidgin
581 # summary = *twitter.com*
582 # urgency = normal
583 #
584 [xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587 #+end_src
588
589 ** Fontconfig
590 :PROPERTIES:
591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
592 :END:
593
594 #+begin_src xml
595 <?xml version="1.0"?>
596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597 <fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
628 <prefer>
629 <family>Liberation Sans</family>
630 </prefer>
631 </alias>
632 </fontconfig>
633 #+end_src
634
635 ** getmail
636
637 *** getmailrc
638 :PROPERTIES:
639 :header-args+: :tangle ~/.getmail/getmailrc
640 :END:
641
642 #+begin_src conf
643 [retriever]
644 type = SimplePOP3SSLRetriever
645 server = fencepost.gnu.org
646 username = aminb
647 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
648 port = 995
649 use_apop = True
650
651 [destination]
652 type = Maildir
653 path = ~/mail/gnu/Inbox/
654
655 [options]
656 delete = True
657 #+end_src
658
659 *** getmail.service
660 :PROPERTIES:
661 :header-args+: :tangle ~/.config/systemd/user/getmail.service
662 :END:
663
664 #+begin_src conf :tangle no
665 [Unit]
666 Description=getmail service
667
668 [Service]
669 Type=oneshot
670 ExecStart=/usr/bin/getmail
671 StandardOutput=syslog
672 StandardError=syslog
673 #+end_src
674
675 *** getmail.timer
676 :PROPERTIES:
677 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
678 :END:
679
680 #+begin_src conf :tangle no
681 [Unit]
682 Description=getmail timer
683
684 [Timer]
685 OnCalendar=*:0/30
686 Persistent=true
687 Unit=getmail.service
688
689 [Install]
690 WantedBy=timers.target
691 #+end_src
692
693 ** Git
694
695 *** gitconfig
696 :PROPERTIES:
697 :header-args+: :tangle ~/.gitconfig
698 :END:
699
700 **** user
701 #+begin_src conf
702 [user]
703 name = Amin Bandali
704 email = bandali@gnu.org
705 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
706 #+end_src
707
708 **** signing
709 #+begin_src conf
710 [commit]
711 gpgsign = true
712 # [format]
713 # signoff = true
714 #+end_src
715
716 **** core
717 #+begin_src conf
718 [core]
719 autocrlf = input # CRLF -> LF on commit
720 editor = emacsclient -t
721 excludesfile = ~/.gitignore_global
722 pager = "less"
723 #+end_src
724
725 **** gpg
726 #+begin_src conf
727 [gpg]
728 program = gpg2
729 #+end_src
730
731 **** alias
732 #+begin_src conf
733 [alias]
734 git = !exec git # handle nested git calls, e.g. git git status
735 aliases = config --get-regexp '^alias\\.'
736 a = add
737 s = status
738 sl = status --long
739 c = checkout
740 cb = checkout -b
741 b = branch
742 r = rebase
743 p = pull
744 pr = pull --rebase
745 ps = push
746 psf = push --force
747 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
748 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
749 #+end_src
750
751 **** color
752 #+begin_src conf
753 [color]
754 ui = auto
755 [color "status"]
756 added = green bold
757 changed = red bold
758 untracked = red bold
759 [color "branch"]
760 current = green bold
761 remote = magenta bold
762 [color "diff"]
763 new = green bold
764 old = red bold
765 #+end_src
766
767 **** status
768 #+begin_src conf
769 [status]
770 # showUntrackedFiles = all
771 short=true
772 branch=true
773 #+end_src
774
775 **** github
776 #+begin_src conf
777 [github]
778 user = aminb
779 #+end_src
780
781 **** send-email
782 #+begin_src conf
783 [sendemail]
784 smtpuser = aminb
785 smtpserver = fencepost.gnu.org
786 smtpserverport = 587
787 smtpencryption = tls
788 annotate = yes
789 #+end_src
790
791 *** gitignore
792 :PROPERTIES:
793 :header-args+: :tangle ~/.gitignore_global
794 :END:
795
796 #+begin_src conf
797 *.orig
798 *.py[co]
799 *.sublime-workspace
800 *~
801 .DS_Store
802 *.elc
803 *-autoloads.el
804 #+end_src
805
806 ** GnuPG
807 :PROPERTIES:
808 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
809 :END:
810
811 #+begin_src conf
812 default-cache-ttl 43200
813 max-cache-ttl 43200
814
815 default-cache-ttl-ssh 10800
816 max-cache-ttl-ssh 10800
817
818 # pinentry-program /usr/bin/pinentry-qt
819 #+end_src
820
821 ** GTK
822
823 *** gtk-2.0
824 :PROPERTIES:
825 :header-args+: :tangle ~/.gtkrc-2.0
826 :END:
827
828 #+begin_src conf
829 gtk-theme-name="Greybird"
830 gtk-icon-theme-name="Paper"
831 gtk-font-name="Ubuntu 10"
832 gtk-menu-images=0
833 # gtk-key-theme-name = "Emacs"
834 #+end_src
835
836 *** gtk-3.0
837 :PROPERTIES:
838 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
839 :END:
840
841 #+begin_src conf :tangle no
842 [Settings]
843 gtk-icon-theme-name = Paper
844 # gtk-theme-name = Adwaita
845
846 gtk-theme-name = Greybird
847 # gtk-theme-name = Arc-Darker
848 # gtk-theme-name = Numix-ArchBlue
849
850 gtk-font-name = Ubuntu 10
851 # gtk-key-theme-name = Emacs
852 #+end_src
853
854 ** [[https://github.com/Leinnan/i3gs][i3gs]]
855 :PROPERTIES:
856 :header-args+: :tangle ~/.config/i3gs/config
857 :END:
858
859 #+begin_src conf :comments none :tangle no
860 borders_width=0 0 2 0
861 separator_width=10
862
863 #[mpd]
864 #preset=MPD
865 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
866 #borders_color=#7FDBFF
867
868 [ram]
869 preset=RAM
870 title=<span weight='heavy' fgcolor='#3D9970'> </span>
871 borders_color=#3D9970
872
873 #[cpu]
874 #preset=CPU
875 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
876 #borders_color=#2ECC40
877
878 #[hdd]
879 #preset=HDD
880 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
881 #borders_color=#01FF70
882
883 [volume]
884 command=volume-info
885 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
886 borders_color=#7FDBFF
887
888 [battery]
889 preset=BAT
890 command=battery-percentage-time
891 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
892 borders_color=#39CCCC
893
894 [wifi]
895 preset=WIFI
896 title=<span weight='heavy' fgcolor='#01FF70'> </span>
897 borders_color=#01FF70
898
899 [date]
900 preset=DATE
901 command=date '+%-I:%M, %a %b %d '
902 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
903 borders_color=#FFDC00
904 separator_width=0
905 #+end_src
906
907 ** i3status
908 :PROPERTIES:
909 :header-args+: :tangle ~/.config/i3status/config
910 :END:
911
912 #+begin_src conf :comments none
913 # i3status configuration file.
914 # see "man i3status" for documentation.
915
916 # It is important that this file is edited as UTF-8.
917 # The following line should contain a sharp s:
918 # ß
919 # If the above line is not correctly displayed, fix your editor first!
920
921 general {
922 colors = true
923 interval = 5
924 }
925
926 # order += "ipv6"
927 order += "disk /"
928 order += "disk /data"
929 order += "wireless _first_"
930 order += "ethernet _first_"
931 order += "battery 0"
932 order += "volume master"
933 order += "load"
934 order += "tztime local"
935
936 wireless _first_ {
937 format_up = "W:%quality %essid %ip"
938 format_down = "W: down"
939 }
940
941 ethernet _first_ {
942 # if you use %speed, i3status requires root privileges
943 format_up = "E: %ip (%speed)"
944 format_down = "E: down"
945 }
946
947 battery 0 {
948 format = "%status %percentage %remaining (%consumption)"
949 path = "/sys/class/power_supply/BAT%d/uevent"
950 low_threshold = "10"
951 threshold_type = "percentage"
952 last_full_capacity = true
953 integer_battery_capacity = true
954 hide_seconds = true
955 }
956
957 tztime local {
958 format = "%-I:%M%P %a %b %d"
959 }
960
961 volume master {
962 format = "♪ %volume"
963 format_muted = "🔇 %volume"
964 device = "pulse"
965 }
966
967 load {
968 format = "%1min"
969 }
970
971 disk "/" {
972 format = "/ %avail"
973 }
974
975 disk "/data" {
976 format = "/data %avail"
977 }
978 #+end_src
979
980 ** isync
981
982 *** mbsyncrc
983 :PROPERTIES:
984 :header-args+: :tangle ~/.mbsyncrc
985 :END:
986
987 #+begin_src conf
988 # Global defaults
989 CopyArrivalDate yes
990
991 ######
992 IMAPAccount amin
993 Host nix.aminb.org
994 User amin@aminb.org
995 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
996 SSLType IMAPS
997
998 IMAPStore amin-remote
999 Account amin
1000
1001 MaildirStore amin-local
1002 Path ~/mail/amin/
1003 Inbox ~/mail/amin/Inbox
1004 SubFolders Verbatim
1005
1006 Channel amin
1007 Master :amin-remote:
1008 Slave :amin-local:
1009 Patterns * !dovecot*
1010 Create Both
1011 SyncState *
1012
1013 ######
1014 IMAPAccount uwaterloo
1015 Host connect.uwaterloo.ca
1016 User abandali
1017 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1018 SSLType IMAPS
1019
1020 IMAPStore uwaterloo-remote
1021 Account uwaterloo
1022
1023 MaildirStore uwaterloo-local
1024 Path ~/mail/uwaterloo/
1025 Inbox ~/mail/uwaterloo/Inbox
1026 SubFolders Verbatim
1027
1028 Channel uwaterloo
1029 Master :uwaterloo-remote:
1030 Slave :uwaterloo-local:
1031 Patterns * !dovecot*
1032 Create Both
1033 SyncState *
1034 #+end_src
1035
1036 *** mbsync.service
1037 :PROPERTIES:
1038 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1039 :END:
1040
1041 #+begin_src conf :tangle no
1042 [Unit]
1043 Description=mbsync service
1044
1045 [Service]
1046 Type=oneshot
1047 ExecStart=/usr/bin/mbsync -Va
1048 StandardOutput=syslog
1049 StandardError=syslog
1050 #+end_src
1051
1052 *** mbsync.timer
1053 :PROPERTIES:
1054 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1055 :END:
1056
1057 #+begin_src conf :tangle no
1058 [Unit]
1059 Description=mbsync timer
1060
1061 [Timer]
1062 OnCalendar=*:0/15
1063 Persistent=true
1064 Unit=mbsync.service
1065
1066 [Install]
1067 WantedBy=timers.target
1068 #+end_src
1069
1070 ** Latexmk
1071 :PROPERTIES:
1072 :header-args+: :tangle ~/.latexmkrc
1073 :END:
1074
1075 #+begin_src conf
1076 $pdf_previewer = "start zathura %O %S";
1077 $clean_ext = "aux out";
1078
1079 # $pdf_update_method = 4;
1080 # $pdf_update_command = "zathura %O %S";
1081
1082 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1083 # by Ctrl+click in the PDF.
1084 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1085 # editor.
1086 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1087 #+end_src
1088
1089 ** libinput
1090
1091 Improve XPS 15 9560's touchpad experience.
1092
1093 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1094 #+begin_src conf :tangle no
1095 Section "InputClass"
1096 Identifier "libinput touchpad catchall"
1097 Driver "libinput"
1098 MatchIsTouchpad "on"
1099 Option "ClickMethod" "clickfinger"
1100 Option "NaturalScrolling" "true"
1101 Option "Tapping" "on"
1102 Option "TappingButtonMap" "lrm"
1103 EndSection
1104 #+end_src
1105
1106 ** mpd
1107 :PROPERTIES:
1108 :header-args+: :tangle ~/.config/mpd/mpd.conf
1109 :END:
1110
1111 #+begin_src conf
1112 # An example configuration file for MPD.
1113 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1114
1115
1116 # Files and directories #######################################################
1117 #
1118 # This setting controls the top directory which MPD will search to discover the
1119 # available audio files and add them to the daemon's online database. This
1120 # setting defaults to the XDG directory, otherwise the music directory will be
1121 # be disabled and audio files will only be accepted over ipc socket (using
1122 # file:// protocol) or streaming files over an accepted protocol.
1123 #
1124 music_directory "~/usr/music"
1125 #
1126 # This setting sets the MPD internal playlist directory. The purpose of this
1127 # directory is storage for playlists created by MPD. The server will use
1128 # playlist files not created by the server but only if they are in the MPD
1129 # format. This setting defaults to playlist saving being disabled.
1130 #
1131 playlist_directory "~/.mpd/playlists"
1132 #
1133 # This setting sets the location of the MPD database. This file is used to
1134 # load the database at server start up and store the database while the
1135 # server is not up. This setting defaults to disabled which will allow
1136 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1137 # files over an accepted protocol.
1138 #
1139 db_file "~/.mpd/database"
1140 #
1141 # These settings are the locations for the daemon log files for the daemon.
1142 # These logs are great for troubleshooting, depending on your log_level
1143 # settings.
1144 #
1145 # The special value "syslog" makes MPD use the local syslog daemon. This
1146 # setting defaults to logging to syslog, otherwise logging is disabled.
1147 #
1148 log_file "~/.mpd/log"
1149 #
1150 # This setting sets the location of the file which stores the process ID
1151 # for use of mpd --kill and some init scripts. This setting is disabled by
1152 # default and the pid file will not be stored.
1153 #
1154 pid_file "~/.mpd/pid"
1155 #
1156 # This setting sets the location of the file which contains information about
1157 # most variables to get MPD back into the same general shape it was in before
1158 # it was brought down. This setting is disabled by default and the server
1159 # state will be reset on server start up.
1160 #
1161 state_file "~/.mpd/state"
1162 #
1163 # The location of the sticker database. This is a database which
1164 # manages dynamic information attached to songs.
1165 #
1166 sticker_file "~/.mpd/sticker.sql"
1167 #
1168 ###############################################################################
1169
1170
1171 # General music daemon options ################################################
1172 #
1173 # This setting specifies the user that MPD will run as. MPD should never run as
1174 # root and you may use this setting to make MPD change its user ID after
1175 # initialization. This setting is disabled by default and MPD is run as the
1176 # current user.
1177 #
1178 #user "nobody"
1179 #
1180 # This setting specifies the group that MPD will run as. If not specified
1181 # primary group of user specified with "user" setting will be used (if set).
1182 # This is useful if MPD needs to be a member of group such as "audio" to
1183 # have permission to use sound card.
1184 #
1185 #group "nogroup"
1186 #
1187 # This setting sets the address for the daemon to listen on. Careful attention
1188 # should be paid if this is assigned to anything other then the default, any.
1189 # This setting can deny access to control of the daemon. Not effective if
1190 # systemd socket activiation is in use.
1191 #
1192 # For network
1193 #bind_to_address "any"
1194 #
1195 # And for Unix Socket
1196 #bind_to_address "~/.mpd/socket"
1197 #
1198 # This setting is the TCP port that is desired for the daemon to get assigned
1199 # to.
1200 #
1201 #port "6600"
1202 #
1203 # This setting controls the type of information which is logged. Available
1204 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1205 # argument is recommended for troubleshooting, though can quickly stretch
1206 # available resources on limited hardware storage.
1207 #
1208 #log_level "default"
1209 #
1210 # If you have a problem with your MP3s ending abruptly it is recommended that
1211 # you set this argument to "no" to attempt to fix the problem. If this solves
1212 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1213 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1214 # point gapless MP3 playback can be enabled.
1215 #
1216 #gapless_mp3_playback "yes"
1217 #
1218 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1219 # of starting playback after startup.
1220 #
1221 #restore_paused "no"
1222 #
1223 # This setting enables MPD to create playlists in a format usable by other
1224 # music players.
1225 #
1226 #save_absolute_paths_in_playlists "no"
1227 #
1228 # This setting defines a list of tag types that will be extracted during the
1229 # audio file discovery process. The complete list of possible values can be
1230 # found in the user manual.
1231 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1232 #
1233 # This setting enables automatic update of MPD's database when files in
1234 # music_directory are changed.
1235 #
1236 #auto_update "yes"
1237 #
1238 # Limit the depth of the directories being watched, 0 means only watch
1239 # the music directory itself. There is no limit by default.
1240 #
1241 #auto_update_depth "3"
1242 #
1243 ###############################################################################
1244
1245
1246 # Symbolic link behavior ######################################################
1247 #
1248 # If this setting is set to "yes", MPD will discover audio files by following
1249 # symbolic links outside of the configured music_directory.
1250 #
1251 #follow_outside_symlinks "yes"
1252 #
1253 # If this setting is set to "yes", MPD will discover audio files by following
1254 # symbolic links inside of the configured music_directory.
1255 #
1256 #follow_inside_symlinks "yes"
1257 #
1258 ###############################################################################
1259
1260
1261 # Zeroconf / Avahi Service Discovery ##########################################
1262 #
1263 # If this setting is set to "yes", service information will be published with
1264 # Zeroconf / Avahi.
1265 #
1266 #zeroconf_enabled "yes"
1267 #
1268 # The argument to this setting will be the Zeroconf / Avahi unique name for
1269 # this MPD server on the network.
1270 #
1271 #zeroconf_name "Music Player"
1272 #
1273 ###############################################################################
1274
1275
1276 # Permissions #################################################################
1277 #
1278 # If this setting is set, MPD will require password authorization. The password
1279 # setting can be specified multiple times for different password profiles.
1280 #
1281 #password "password@read,add,control,admin"
1282 #
1283 # This setting specifies the permissions a user has who has not yet logged in.
1284 #
1285 #default_permissions "read,add,control,admin"
1286 #
1287 ###############################################################################
1288
1289
1290 # Database #######################################################################
1291 #
1292
1293 #database {
1294 # plugin "proxy"
1295 # host "other.mpd.host"
1296 # port "6600"
1297 #}
1298
1299 # Input #######################################################################
1300 #
1301
1302 input {
1303 plugin "curl"
1304 # proxy "proxy.isp.com:8080"
1305 # proxy_user "user"
1306 # proxy_password "password"
1307 }
1308
1309 #
1310 ###############################################################################
1311
1312 # Audio Output ################################################################
1313 #
1314
1315 audio_output {
1316 type "pulse"
1317 name "pulse audio"
1318 }
1319
1320 audio_output {
1321 type "fifo"
1322 name "my_fifo"
1323 path "/tmp/mpd.fifo"
1324 format "44100:16:2"
1325 }
1326
1327 # MPD supports various audio output types, as well as playing through multiple
1328 # audio outputs at the same time, through multiple audio_output settings
1329 # blocks. Setting this block is optional, though the server will only attempt
1330 # autodetection for one sound card.
1331 #
1332 # An example of an ALSA output:
1333 #
1334 #audio_output {
1335 # type "alsa"
1336 # name "My ALSA Device"
1337 ## device "hw:0,0" # optional
1338 ## mixer_type "hardware" # optional
1339 ## mixer_device "default" # optional
1340 ## mixer_control "PCM" # optional
1341 ## mixer_index "0" # optional
1342 #}
1343 #
1344 # An example of an OSS output:
1345 #
1346 #audio_output {
1347 # type "oss"
1348 # name "My OSS Device"
1349 ## device "/dev/dsp" # optional
1350 ## mixer_type "hardware" # optional
1351 ## mixer_device "/dev/mixer" # optional
1352 ## mixer_control "PCM" # optional
1353 #}
1354 #
1355 # An example of a shout output (for streaming to Icecast):
1356 #
1357 #audio_output {
1358 # type "shout"
1359 # encoder "vorbis" # optional
1360 # name "My Shout Stream"
1361 # host "localhost"
1362 # port "8000"
1363 # mount "/mpd.ogg"
1364 # password "hackme"
1365 # quality "5.0"
1366 # bitrate "128"
1367 # format "44100:16:1"
1368 ## protocol "icecast2" # optional
1369 ## user "source" # optional
1370 ## description "My Stream Description" # optional
1371 ## url "http://example.com" # optional
1372 ## genre "jazz" # optional
1373 ## public "no" # optional
1374 ## timeout "2" # optional
1375 ## mixer_type "software" # optional
1376 #}
1377 #
1378 # An example of a recorder output:
1379 #
1380 #audio_output {
1381 # type "recorder"
1382 # name "My recorder"
1383 # encoder "vorbis" # optional, vorbis or lame
1384 # path "/var/lib/mpd/recorder/mpd.ogg"
1385 ## quality "5.0" # do not define if bitrate is defined
1386 # bitrate "128" # do not define if quality is defined
1387 # format "44100:16:1"
1388 #}
1389 #
1390 # An example of a httpd output (built-in HTTP streaming server):
1391 #
1392 #audio_output {
1393 # type "httpd"
1394 # name "My HTTP Stream"
1395 # encoder "vorbis" # optional, vorbis or lame
1396 # port "8000"
1397 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1398 ## quality "5.0" # do not define if bitrate is defined
1399 # bitrate "128" # do not define if quality is defined
1400 # format "44100:16:1"
1401 # max_clients "0" # optional 0=no limit
1402 #}
1403 #
1404 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1405 #
1406 #audio_output {
1407 # type "pulse"
1408 # name "My Pulse Output"
1409 ## server "remote_server" # optional
1410 ## sink "remote_server_sink" # optional
1411 #}
1412 #
1413 # An example of a winmm output (Windows multimedia API).
1414 #
1415 #audio_output {
1416 # type "winmm"
1417 # name "My WinMM output"
1418 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1419 # or
1420 ## device "0" # optional
1421 ## mixer_type "hardware" # optional
1422 #}
1423 #
1424 # An example of an openal output.
1425 #
1426 #audio_output {
1427 # type "openal"
1428 # name "My OpenAL output"
1429 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1430 #}
1431 #
1432 # An example of an sndio output.
1433 #
1434 #audio_output {
1435 # type "sndio"
1436 # name "sndio output"
1437 # mixer_type "software"
1438 #}
1439 #
1440 # An example of an OS X output:
1441 #
1442 #audio_output {
1443 # type "osx"
1444 # name "My OS X Device"
1445 ## device "Built-in Output" # optional
1446 ## channel_map "-1,-1,0,1" # optional
1447 #}
1448 #
1449 ## Example "pipe" output:
1450 #
1451 #audio_output {
1452 # type "pipe"
1453 # name "my pipe"
1454 # command "aplay -f cd 2>/dev/null"
1455 ## Or if you're want to use AudioCompress
1456 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1457 ## Or to send raw PCM stream through PCM:
1458 # command "nc example.org 8765"
1459 # format "44100:16:2"
1460 #}
1461 #
1462 ## An example of a null output (for no audio output):
1463 #
1464 #audio_output {
1465 # type "null"
1466 # name "My Null Output"
1467 # mixer_type "none" # optional
1468 #}
1469 #
1470 ###############################################################################
1471
1472
1473 # Normalization automatic volume adjustments ##################################
1474 #
1475 # This setting specifies the type of ReplayGain to use. This setting can have
1476 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1477 # chooses between "track" and "album" depending on the current state of
1478 # random playback. If random playback is enabled then "track" mode is used.
1479 # See <http://www.replaygain.org> for more details about ReplayGain.
1480 # This setting is off by default.
1481 #
1482 #replaygain "album"
1483 #
1484 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1485 # default this setting is disabled.
1486 #
1487 #replaygain_preamp "0"
1488 #
1489 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1490 # By default this setting is disabled.
1491 #
1492 #replaygain_missing_preamp "0"
1493 #
1494 # This setting enables or disables ReplayGain limiting.
1495 # MPD calculates actual amplification based on the ReplayGain tags
1496 # and replaygain_preamp / replaygain_missing_preamp setting.
1497 # If replaygain_limit is enabled MPD will never amplify audio signal
1498 # above its original level. If replaygain_limit is disabled such amplification
1499 # might occur. By default this setting is enabled.
1500 #
1501 #replaygain_limit "yes"
1502 #
1503 # This setting enables on-the-fly normalization volume adjustment. This will
1504 # result in the volume of all playing audio to be adjusted so the output has
1505 # equal "loudness". This setting is disabled by default.
1506 #
1507 #volume_normalization "no"
1508 #
1509 ###############################################################################
1510
1511 # Character Encoding ##########################################################
1512 #
1513 # If file or directory names do not display correctly for your locale then you
1514 # may need to modify this setting.
1515 #
1516 #filesystem_charset "UTF-8"
1517 #
1518 ###############################################################################
1519 #+end_src
1520
1521 ** msmtp
1522 :PROPERTIES:
1523 :header-args+: :tangle ~/.msmtprc
1524 :END:
1525
1526 #+begin_src conf
1527 # Set default values for all following accounts.
1528 defaults
1529 port 587
1530 tls on
1531 auth on
1532 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1533 logfile ~/.msmtp.log
1534
1535 # aminb
1536 account aminb
1537 host nix.aminb.org
1538 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1539 tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
1540 tls_starttls on
1541 from amin@aminb.org
1542 user amin@aminb.org
1543 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1544
1545 # gnu
1546 account gnu
1547 host fencepost.gnu.org
1548 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1549 tls_fingerprint 34:60:91:B5:71:5B:76:87:50:F3:83:13:26:0F:EE:75:42:83:93:9A:E2:AF:1E:87:72:02:C9:61:CE:28:1B:8E
1550 tls_starttls on
1551 from aminb@gnu.org
1552 user aminb
1553 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1554
1555 # gnu (bandali)
1556 account gnu-bandali : gnu
1557 from bandali@gnu.org
1558
1559 # uwaterloo
1560 account uwaterloo
1561 host connect.uwaterloo.ca
1562 tls_starttls on
1563 from abandali@uwaterloo.ca
1564 user abandali
1565 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1566 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1567
1568 # Set a default account
1569 account default : aminb
1570 #+end_src
1571
1572 ** ncmpcpp
1573
1574 *** config
1575 :PROPERTIES:
1576 :header-args+: :tangle ~/.ncmpcpp/config
1577 :END:
1578
1579 #+begin_src conf :tangle no
1580 ##############################################################
1581 ## This is the example configuration file. Copy it to ##
1582 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1583 ## and set up your preferences. ##
1584 ##############################################################
1585 #
1586 ##### directories ######
1587 ##
1588 ## Directory for storing ncmpcpp related files.
1589 ## Changing it is useful if you want to store
1590 ## everything somewhere else and provide command
1591 ## line setting for alternative location to config
1592 ## file which defines that while launching ncmpcpp.
1593 ##
1594 #
1595 ncmpcpp_directory = ~/.ncmpcpp
1596 #
1597 ##
1598 ## Directory for storing downloaded lyrics. It
1599 ## defaults to ~/.lyrics since other MPD clients
1600 ## (eg. ncmpc) also use that location.
1601 ##
1602 #
1603 #lyrics_directory = ~/.lyrics
1604 #
1605 ##### connection settings #####
1606 #
1607 #mpd_host = localhost
1608 #
1609 #mpd_port = 6600
1610 #
1611 #mpd_connection_timeout = 5
1612 #
1613 ## Needed for tag editor and file operations to work.
1614 ##
1615 mpd_music_dir = ~/usr/music
1616 #
1617 #mpd_crossfade_time = 5
1618 #
1619 ##### music visualizer #####
1620 ##
1621 ## Note: In order to make music visualizer work you'll
1622 ## need to use mpd fifo output, whose format parameter
1623 ## has to be set to 44100:16:1 for mono visualization
1624 ## or 44100:16:2 for stereo visualization. Example
1625 ## configuration (it has to be put into mpd.conf):
1626 ##
1627 ## audio_output {
1628 ## type "fifo"
1629 ## name "Visualizer feed"
1630 ## path "/tmp/mpd.fifo"
1631 ## format "44100:16:2"
1632 ## }
1633 ##
1634 #
1635 visualizer_fifo_path = /tmp/mpd.fifo
1636 #
1637 ##
1638 ## Note: Below parameter is needed for ncmpcpp
1639 ## to determine which output provides data for
1640 ## visualizer and thus allow syncing between
1641 ## visualization and sound as currently there
1642 ## are some problems with it.
1643 ##
1644 #
1645 visualizer_output_name = my fifo
1646 #
1647 ##
1648 ## If you set format to 44100:16:2, make it 'yes'.
1649 ##
1650 visualizer_in_stereo = yes
1651 #
1652 ##
1653 ## Multiply received samples by given value. Very
1654 ## useful for proper visualization of quiet music.
1655 ##
1656 #visualizer_sample_multiplier = 1
1657 #
1658 ##
1659 ## Note: Below parameter defines how often ncmpcpp
1660 ## has to "synchronize" visualizer and audio outputs.
1661 ## 30 seconds is optimal value, but if you experience
1662 ## synchronization problems, set it to lower value.
1663 ## Keep in mind that sane values start with >=10.
1664 ##
1665 #
1666 visualizer_sync_interval = 30
1667 #
1668 ##
1669 ## Note: To enable spectrum frequency visualization
1670 ## you need to compile ncmpcpp with fftw3 support.
1671 ##
1672 #
1673 ## Available values: spectrum, wave, wave_filled, ellipse.
1674 ##
1675 visualizer_type = spectrum
1676 #
1677 #visualizer_look = ●▮
1678 visualizer_look = "●•"
1679 #
1680 #visualizer_color = blue, cyan, green, yellow, magenta, red
1681 #
1682 ## Alternative subset of 256 colors for terminals that support it.
1683 ##
1684 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1685 #
1686 ##### system encoding #####
1687 ##
1688 ## ncmpcpp should detect your charset encoding
1689 ## but if it failed to do so, you can specify
1690 ## charset encoding you are using here.
1691 ##
1692 ## Note: You can see whether your ncmpcpp build
1693 ## supports charset detection by checking output
1694 ## of `ncmpcpp --version`.
1695 ##
1696 ## Note: Since MPD uses UTF-8 by default, setting
1697 ## this option makes sense only if your encoding
1698 ## is different.
1699 ##
1700 #
1701 #system_encoding = ""
1702 #
1703 ##### delays #####
1704 #
1705 ## Time of inactivity (in seconds) after playlist
1706 ## highlighting will be disabled (0 = always on).
1707 ##
1708 #playlist_disable_highlight_delay = 5
1709 #
1710 ## Defines how long messages are supposed to be visible.
1711 ##
1712 #message_delay_time = 5
1713 #
1714 ##### song format #####
1715 ##
1716 ## For a song format you can use:
1717 ##
1718 ## %l - length
1719 ## %f - filename
1720 ## %D - directory
1721 ## %a - artist
1722 ## %A - album artist
1723 ## %t - title
1724 ## %b - album
1725 ## %y - date
1726 ## %n - track number (01/12 -> 01)
1727 ## %N - full track info (01/12 -> 01/12)
1728 ## %g - genre
1729 ## %c - composer
1730 ## %p - performer
1731 ## %d - disc
1732 ## %C - comment
1733 ## %P - priority
1734 ## $R - begin right alignment
1735 ##
1736 ## If you want to make sure that a part of the format is displayed
1737 ## only when certain tags are present, you can archieve it by
1738 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1739 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1740 ## It is also possible to define a list of alternatives by providing
1741 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1742 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1743 ## present.
1744 ##
1745 ## Note: If you want to set limit on maximal length of a tag, just
1746 ## put the appropriate number between % and character that defines
1747 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1748 ##
1749 ## In addition, formats support markers used for text attributes.
1750 ## They are followed by character '$'. After that you can put:
1751 ##
1752 ## - 0 - default window color (discards all other colors)
1753 ## - 1 - black
1754 ## - 2 - red
1755 ## - 3 - green
1756 ## - 4 - yellow
1757 ## - 5 - blue
1758 ## - 6 - magenta
1759 ## - 7 - cyan
1760 ## - 8 - white
1761 ## - 9 - end of current color
1762 ## - b - bold text
1763 ## - u - underline text
1764 ## - r - reverse colors
1765 ## - a - use alternative character set
1766 ##
1767 ## If you don't want to use a non-color attribute anymore, just put it
1768 ## again, but this time insert character '/' between '$' and attribute
1769 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1770 ## or filename with reversed colors.
1771 ##
1772 ## If you want to use 256 colors and/or background colors in formats
1773 ## (the naming scheme is described below in section about color
1774 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1775 ## the artist tag to one of the non-standard colors and make it have
1776 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1777 ## that for standard colors this is interchangable with attributes
1778 ## listed above.
1779 ##
1780 ## Note: colors can be nested.
1781 ##
1782 #
1783 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1784 #
1785 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1786 #
1787 #song_library_format = {%n - }{%t}|{%f}
1788 #
1789 #
1790 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1791 #
1792 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1793 #
1794 #now_playing_prefix = $b
1795 #
1796 #now_playing_suffix = $/b
1797 #
1798 #browser_playlist_prefix = "$2playlist$9 "
1799 #
1800 #selected_item_prefix = $6
1801 #
1802 #selected_item_suffix = $9
1803 #
1804 #modified_item_prefix = $3> $9
1805 #
1806 ##
1807 ## Note: attributes are not supported for the following variables.
1808 ##
1809 #song_window_title_format = {%a - }{%t}|{%f}
1810 ##
1811 ## Note: Below variables are used for sorting songs in browser.
1812 ## The sort mode determines how songs are sorted, and can be used
1813 ## in combination with a sort format to specify a custom sorting format.
1814 ## Available values for browser_sort_mode are "name", "mtime", "format"
1815 ## and "noop".
1816 ##
1817 #
1818 #browser_sort_mode = name
1819 #
1820 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1821 #
1822 ##### columns settings #####
1823 ##
1824 ## syntax of song columns list format is "column column etc."
1825 ##
1826 ## - syntax for each column is:
1827 ##
1828 ## (width of the column)[color of the column]{displayed tag}
1829 ##
1830 ## Note: Width is by default in %, if you want a column to
1831 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1832 ## will be the column that take 10% of screen (so the real width
1833 ## will depend on actual screen size), whereas (10f)[white]{a}
1834 ## will take 10 terminal cells, no matter how wide the screen is.
1835 ##
1836 ## - color is optional (if you want the default one,
1837 ## leave the field empty).
1838 ##
1839 ## Note: You can give a column additional attributes by putting appropriate
1840 ## character after displayed tag character. Available attributes are:
1841 ##
1842 ## - r - column will be right aligned
1843 ## - E - if tag is empty, empty tag marker won't be displayed
1844 ##
1845 ## You can also:
1846 ##
1847 ## - give a column custom name by putting it after attributes,
1848 ## separated with character ':', e.g. {lr:Length} gives you
1849 ## right aligned column of lengths named "Length".
1850 ##
1851 ## - define sequence of tags, that have to be displayed in case
1852 ## predecessor is empty in a way similar to the one in classic
1853 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1854 ## creates column named "Owner" that tries to display artist
1855 ## tag and then composer and performer if previous ones are
1856 ## not available.
1857 ##
1858 #
1859 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1860 #
1861 ##### various settings #####
1862 #
1863 ##
1864 ## Note: Custom command that will be executed each
1865 ## time song changes. Useful for notifications etc.
1866 ##
1867 #execute_on_song_change = ""
1868 #
1869 #playlist_show_mpd_host = no
1870 #
1871 #playlist_show_remaining_time = no
1872 #
1873 #playlist_shorten_total_times = no
1874 #
1875 #playlist_separate_albums = no
1876 #
1877 ##
1878 ## Note: Possible display modes: classic, columns.
1879 ##
1880 #playlist_display_mode = columns
1881 #
1882 #browser_display_mode = classic
1883 #
1884 #search_engine_display_mode = classic
1885 #
1886 #playlist_editor_display_mode = classic
1887 #
1888 #discard_colors_if_item_is_selected = yes
1889 #
1890 #incremental_seeking = yes
1891 #
1892 #seek_time = 1
1893 #
1894 #volume_change_step = 2
1895 #
1896 #autocenter_mode = no
1897 #
1898 #centered_cursor = no
1899 #
1900 ##
1901 ## Note: You can specify third character which will
1902 ## be used to build 'empty' part of progressbar.
1903 ##
1904 #progressbar_look = =>
1905 progressbar_look = "─╼╶"
1906 #progressbar_look = "─⊙╶"
1907 #
1908 #progressbar_boldness = yes
1909 #
1910 ## Available values: database, playlist.
1911 ##
1912 #default_place_to_search_in = database
1913 #
1914 ## Available values: classic, alternative.
1915 ##
1916 #user_interface = classic
1917 #
1918 #data_fetching_delay = yes
1919 #
1920 ## Available values: artist, album_artist, date, genre, composer, performer.
1921 ##
1922 #media_library_primary_tag = artist
1923 #
1924 ## Available values: wrapped, normal.
1925 ##
1926 #default_find_mode = wrapped
1927 #
1928 #default_tag_editor_pattern = %n - %t
1929 #
1930 #header_visibility = yes
1931 #
1932 #statusbar_visibility = yes
1933 #
1934 #titles_visibility = yes
1935 #
1936 #header_text_scrolling = yes
1937 #
1938 #cyclic_scrolling = no
1939 #
1940 #lines_scrolled = 2
1941 #
1942 #follow_now_playing_lyrics = no
1943 #
1944 #fetch_lyrics_for_current_song_in_background = no
1945 #
1946 #store_lyrics_in_song_dir = no
1947 #
1948 #generate_win32_compatible_filenames = yes
1949 #
1950 #allow_for_physical_item_deletion = no
1951 #
1952 ##
1953 ## Note: If you set this variable, ncmpcpp will try to
1954 ## get info from last.fm in language you set and if it
1955 ## fails, it will fall back to english. Otherwise it will
1956 ## use english the first time.
1957 ##
1958 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1959 ##
1960 #lastfm_preferred_language = en
1961 #
1962 #show_hidden_files_in_local_browser = no
1963 #
1964 ##
1965 ## How shall screen switcher work?
1966 ##
1967 ## - "previous" - switch between the current and previous screen.
1968 ## - "screen1,...,screenN" - switch between given sequence of screens.
1969 ##
1970 ## Screens available for use: help, playlist, browser, search_engine,
1971 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1972 ##
1973 #screen_switcher_mode = playlist, browser
1974 #
1975 ##
1976 ## Note: You can define startup screen
1977 ## by choosing screen from the list above.
1978 ##
1979 #startup_screen = playlist
1980 #
1981 ##
1982 ## Note: You can define startup slave screen
1983 ## by choosing screen from the list above or
1984 ## an empty value for no slave screen.
1985 ##
1986 #startup_slave_screen = ""
1987 #
1988 #startup_slave_screen_focus = no
1989 #
1990 ##
1991 ## Default width of locked screen (in %).
1992 ## Acceptable values are from 20 to 80.
1993 ##
1994 #
1995 #locked_screen_width_part = 50
1996 #
1997 #ask_for_locked_screen_width_part = yes
1998 #
1999 #jump_to_now_playing_song_at_start = yes
2000 #
2001 #ask_before_clearing_playlists = yes
2002 #
2003 #clock_display_seconds = no
2004 #
2005 #display_volume_level = yes
2006 #
2007 #display_bitrate = no
2008 #
2009 #display_remaining_time = no
2010 #
2011 ## Available values: none, basic, extended, perl.
2012 ##
2013 #regular_expressions = perl
2014 #
2015 ##
2016 ## Note: If below is enabled, ncmpcpp will ignore leading
2017 ## "The" word while sorting items in browser, tags in
2018 ## media library, etc.
2019 ##
2020 #ignore_leading_the = no
2021 #
2022 #block_search_constraints_change_if_items_found = yes
2023 #
2024 #mouse_support = yes
2025 #
2026 #mouse_list_scroll_whole_page = yes
2027 #
2028 #empty_tag_marker = <empty>
2029 #
2030 #tags_separator = " | "
2031 #
2032 #tag_editor_extended_numeration = no
2033 #
2034 #media_library_sort_by_mtime = no
2035 #
2036 #enable_window_title = yes
2037 #
2038 ##
2039 ## Note: You can choose default search mode for search
2040 ## engine. Available modes are:
2041 ##
2042 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2043 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2044 ## but if your mpd is on a remote machine, downloading big database
2045 ## to process it can take a while
2046 ## - 3 - match only exact values (this mode uses mpd function for searching
2047 ## in database and local one for searching in current playlist)
2048 ##
2049 #
2050 #search_engine_default_search_mode = 1
2051 #
2052 #external_editor = nano
2053 #
2054 ## Note: set to yes if external editor is a console application.
2055 ##
2056 #use_console_editor = yes
2057 #
2058 ##### colors definitions #####
2059 ##
2060 ## It is possible to set a background color by setting a color
2061 ## value "<foreground>_<background>", e.g. red_black will set
2062 ## foregound color to red and background color to black.
2063 ##
2064 ## In addition, for terminals that support 256 colors it
2065 ## is possible to set one of them by using a number in range
2066 ## [1, 256] instead of color name, e.g. numerical value
2067 ## corresponding to red_black is 2_1. To find out if the
2068 ## terminal supports 256 colors, run ncmpcpp and check out
2069 ## the bottom of the help screen for list of available colors
2070 ## and their numerical values.
2071 ##
2072 ## Note: due to technical limitations of ncurses, if 256 colors
2073 ## are used, it is possible to either use only the colors with
2074 ## default background color, or all pairs from 1_1 up to 254_127,
2075 ## depending on the ncurses version used.
2076 ##
2077 #
2078 #colors_enabled = yes
2079 #
2080 #empty_tag_color = cyan
2081 #
2082 #header_window_color = default
2083 #
2084 #volume_color = default
2085 #
2086 #state_line_color = default
2087 #
2088 #state_flags_color = default
2089 #
2090 #main_window_color = yellow
2091 #
2092 #color1 = white
2093 #
2094 #color2 = green
2095 #
2096 #main_window_highlight_color = yellow
2097 #
2098 #progressbar_color = black
2099 #
2100 #progressbar_elapsed_color = green
2101 #
2102 #statusbar_color = default
2103 #
2104 #alternative_ui_separator_color = black
2105 #
2106 #active_column_color = red
2107 #
2108 #window_border_color = green
2109 #
2110 #active_window_border = red
2111 #
2112 #+end_src
2113
2114 *** bindings
2115 :PROPERTIES:
2116 :header-args+: :tangle ~/.ncmpcpp/bindings
2117 :END:
2118
2119 #+begin_src conf :tangle no
2120 def_key "j"
2121 scroll_down
2122 def_key "k"
2123 scroll_up
2124
2125 def_key "ctrl-u"
2126 page_up
2127 def_key "ctrl-d"
2128 page_down
2129
2130 def_key "h"
2131 previous_column
2132 def_key "l"
2133 next_column
2134
2135 def_key "."
2136 show_lyrics
2137
2138 def_key "n"
2139 next_found_item
2140 def_key "N"
2141 previous_found_item
2142
2143 def_key "J"
2144 move_sort_order_down
2145 def_key "K"
2146 move_sort_order_up
2147 #+end_src
2148
2149 ** notmuch
2150
2151 *** notmuch-config
2152 :PROPERTIES:
2153 :header-args+: :tangle ~/.notmuch-config
2154 :END:
2155
2156 #+begin_src conf
2157 # .notmuch-config - Configuration file for the notmuch mail system
2158 #
2159 # For more information about notmuch, see https://notmuchmail.org
2160
2161 # Database configuration
2162 #
2163 # The only value supported here is 'path' which should be the top-level
2164 # directory where your mail currently exists and to where mail will be
2165 # delivered in the future. Files should be individual email messages.
2166 # Notmuch will store its database within a sub-directory of the path
2167 # configured here named ".notmuch".
2168 #
2169 [database]
2170 path=/home/amin/mail
2171
2172 # User configuration
2173 #
2174 # Here is where you can let notmuch know how you would like to be
2175 # addressed. Valid settings are
2176 #
2177 # name Your full name.
2178 # primary_email Your primary email address.
2179 # other_email A list (separated by ';') of other email addresses
2180 # at which you receive email.
2181 #
2182 # Notmuch will use the various email addresses configured here when
2183 # formatting replies. It will avoid including your own addresses in the
2184 # recipient list of replies, and will set the From address based on the
2185 # address to which the original email was addressed.
2186 #
2187 [user]
2188 name=Amin Bandali
2189 primary_email=amin@aminb.org
2190 other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2191
2192 # Configuration for "notmuch new"
2193 #
2194 # The following options are supported here:
2195 #
2196 # tags A list (separated by ';') of the tags that will be
2197 # added to all messages incorporated by "notmuch new".
2198 #
2199 # ignore A list (separated by ';') of file and directory names
2200 # that will not be searched for messages by "notmuch new".
2201 #
2202 # NOTE: *Every* file/directory that goes by one of those
2203 # names will be ignored, independent of its depth/location
2204 # in the mail store.
2205 #
2206 [new]
2207 tags=new;
2208 #tags=unread;inbox;
2209 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2210
2211 # Search configuration
2212 #
2213 # The following option is supported here:
2214 #
2215 # exclude_tags
2216 # A ;-separated list of tags that will be excluded from
2217 # search results by default. Using an excluded tag in a
2218 # query will override that exclusion.
2219 #
2220 [search]
2221 exclude_tags=deleted;spam;
2222
2223 # Maildir compatibility configuration
2224 #
2225 # The following option is supported here:
2226 #
2227 # synchronize_flags Valid values are true and false.
2228 #
2229 # If true, then the following maildir flags (in message filenames)
2230 # will be synchronized with the corresponding notmuch tags:
2231 #
2232 # Flag Tag
2233 # ---- -------
2234 # D draft
2235 # F flagged
2236 # P passed
2237 # R replied
2238 # S unread (added when 'S' flag is not present)
2239 #
2240 # The "notmuch new" command will notice flag changes in filenames
2241 # and update tags, while the "notmuch tag" and "notmuch restore"
2242 # commands will notice tag changes and update flags in filenames
2243 #
2244 [maildir]
2245 synchronize_flags=true
2246
2247 # Cryptography related configuration
2248 #
2249 # The following option is supported here:
2250 #
2251 # gpg_path
2252 # binary name or full path to invoke gpg.
2253 #
2254 [crypto]
2255 gpg_path=gpg
2256 #+end_src
2257
2258 *** pre-new hook
2259 :PROPERTIES:
2260 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2261 :END:
2262
2263 #+begin_src sh
2264 touch /tmp/gnusieve.log
2265 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2266 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2267 #+end_src
2268
2269 *** post-new hook
2270 :PROPERTIES:
2271 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2272 :END:
2273
2274 #+begin_src sh
2275 # apply sent tag to messages sent by me
2276 notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2277
2278 # initial tagging
2279 notmuch tag -latest -- tag:latest
2280 notmuch tag +inbox +unread +latest -new -- tag:new
2281
2282
2283 # apply tags to lists
2284
2285 # <aminb>
2286 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2287 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2288
2289 notmuch tag -inbox +pay -- folder:amin/pay
2290 notmuch tag -inbox +banking -- folder:amin/banking
2291 notmuch tag -inbox +work -- folder:amin/work
2292 # </aminb>
2293
2294 # <uw>
2295 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2296 notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2297 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2298 notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2299 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2300
2301 notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
2302 notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2303 notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2304 notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2305 notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2306 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2307 # </uw>
2308
2309 # <gnu>
2310 notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2311 notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2312 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2313 notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2314 notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2315 notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2316 notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2317 notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2318 notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2319 notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2320 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2321
2322 notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2323 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2324 notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2325 notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2326
2327 notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2328 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2329 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2330 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2331 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2332 # </gnu>
2333
2334 notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2335 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2336 #+end_src
2337
2338 *** notmuch.service
2339 :PROPERTIES:
2340 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2341 :END:
2342
2343 #+begin_src conf :tangle no
2344 [Unit]
2345 Description=notmuch service
2346
2347 [Service]
2348 Type=oneshot
2349 ExecStart=/usr/bin/notmuch new
2350 StandardOutput=syslog
2351 StandardError=syslog
2352 #+end_src
2353
2354 *** notmuch.timer
2355 :PROPERTIES:
2356 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2357 :END:
2358
2359 #+begin_src conf :tangle no
2360 [Unit]
2361 Description=notmuch timer
2362
2363 [Timer]
2364 OnCalendar=*:0/5
2365 Persistent=true
2366 Unit=notmuch.service
2367
2368 [Install]
2369 WantedBy=timers.target
2370 #+end_src
2371
2372 ** offlineimap
2373
2374 *** offlineimaprc
2375 :PROPERTIES:
2376 :header-args+: :tangle ~/.offlineimaprc
2377 :END:
2378
2379 #+begin_src conf :tangle no
2380 [general]
2381 pythonfile = ~/.offlineimap.py
2382 accounts = Gmail, aminb
2383 maxsyncaccounts = 3
2384
2385 [Account Gmail]
2386 localrepository = GmailL
2387 remoterepository = GmailR
2388
2389 [Account aminb]
2390 localrepository = aminbL
2391 remoterepository = aminbR
2392
2393 [Repository GmailL]
2394 type = Maildir
2395 localfolders = ~/Maildir/Gmail
2396
2397 [Repository GmailR]
2398 type = IMAP
2399 remotehost = imap.gmail.com
2400 remoteusereval = mailuser("gmail")
2401 remotepasseval = mailpasswd("gmail")
2402 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2403 ssl = yes
2404 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2405 maxconnections = 1
2406 realdelete = no
2407
2408 [Repository aminbL]
2409 type = Maildir
2410 localfolders = ~/Maildir/aminb
2411
2412 [Repository aminbR]
2413 type = IMAP
2414 remotehost = mail.aminb.org
2415 remoteusereval = mailuser("aminb")
2416 remotepasseval = mailpasswd("aminb")
2417 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2418 ssl = yes
2419 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2420 maxconnections = 1
2421 realdelete = no
2422 #+end_src
2423
2424 *** offlineimap.py
2425 :PROPERTIES:
2426 :header-args+: :tangle ~/.offlineimap.py
2427 :END:
2428
2429 #+begin_src python :tangle no
2430 import os
2431 import subprocess
2432
2433 def mailpasswd(acct):
2434 acct = os.path.basename(acct)
2435 path = "/home/amin/.passwd/%s.gpg" % acct
2436 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2437 try:
2438 return subprocess.check_output(args).strip()
2439 except subprocess.CalledProcessError:
2440 return ""
2441
2442 def mailuser(acct):
2443 acct = os.path.basename(acct)
2444 path = "/home/amin/.passwd/%s" % acct
2445 args = ["cat", path]
2446 try:
2447 return subprocess.check_output(args).strip()
2448 except subprocess.CalledProcessError:
2449 return ""
2450
2451 def prime_gpg_agent():
2452 ret = False
2453 i = 1
2454 while not ret:
2455 ret = (mailpasswd("prime") == "prime")
2456 if i > 2:
2457 from offlineimap.ui import getglobalui
2458 sys.stderr.write("Error reading in passwords. Terminating.\n")
2459 getglobalui().terminate()
2460 i += 1
2461 return ret
2462
2463 prime_gpg_agent()
2464 #+end_src
2465
2466 ** pigeonhole
2467 *** gnu.sieve
2468 :PROPERTIES:
2469 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2470 :END:
2471
2472 #+begin_src conf
2473 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2474
2475 if anyof (
2476 address :is "from" "webmasters@gnu.org",
2477 address :is "from" "webmasters-comment@gnu.org") {
2478 fileinto :create "webmasters";
2479 stop;
2480 }
2481
2482 include :personal "lists";
2483 #+end_src
2484
2485 *** lists.sieve
2486 :PROPERTIES:
2487 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2488 :END:
2489
2490 #+begin_src conf
2491 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2492 "include" ];
2493
2494 if anyof (
2495 header :contains "list-id" "<emacs-devel.gnu.org>",
2496 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2497 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2498 header :contains "list-id" "<fencepost-users.gnu.org>",
2499 header :contains "list-id" "<guix-devel.gnu.org>",
2500 header :contains "list-id" "<guile-devel.gnu.org>",
2501 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2502 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2503 header :contains "list-id" "<www-commits.gnu.org>",
2504 header :contains "list-id" "<www-discuss.gnu.org>",
2505 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2506 header :contains "list-id" "<haskell-cafe.haskell.org>",
2507 header :contains "list-id" "<haskell-art.we.lurk.org>",
2508 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2509 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2510 set :lower "listname" "${1}";
2511 fileinto :create "l/${listname}";
2512 }
2513 }
2514
2515 if anyof (
2516 header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2517 header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2518 header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2519 header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2520 header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2521 if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2522 set :lower "username" "${1}";
2523 set :lower "listname" "${2}";
2524 fileinto :create "l/${username}/${listname}";
2525 }
2526 }
2527 #+end_src
2528
2529 ** polybar
2530
2531 *** config
2532 :PROPERTIES:
2533 :header-args+: :tangle ~/.config/polybar/config
2534 :END:
2535
2536 #+begin_src conf :tangle no
2537 ;=====================================================
2538 ;
2539 ; To learn more about how to configure Polybar
2540 ; go to https://github.com/jaagr/polybar
2541 ;
2542 ; The README contains alot of information
2543 ;
2544 ;=====================================================
2545
2546 [colors]
2547 ;background = ${xrdb:color0:#222}
2548 background = #222
2549 background-alt = #444
2550 ;foreground = ${xrdb:color7:#222}
2551 foreground = #eee
2552 foreground-alt = #888
2553 primary = #ffb52a
2554 secondary = #e60053
2555 alert = #bd2c40
2556
2557 [bar/main]
2558 ;monitor = ${env:MONITOR:HDMI-1}
2559 width = 100%
2560 height = 27
2561 ;offset-x = 1%
2562 ;offset-y = 1%
2563 radius = 3.0
2564 fixed-center = true
2565
2566 background = ${colors.background}
2567 foreground = ${colors.foreground}
2568
2569 line-size = 3
2570 line-color = #f00
2571
2572 border-size = 4
2573 border-color = #00000000
2574
2575 padding-left = 0
2576 padding-right = 2
2577
2578 module-margin-left = 2
2579 module-margin-right = 2
2580
2581 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2582 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2583 font-2 = Wuncon Siji:pixelsize=10;1
2584 font-3 = FontAwesome:pixelsize=10;1
2585
2586 modules-left = bspwm xwindow
2587 modules-center =
2588 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2589
2590 tray-position = right
2591 tray-padding = 1
2592 ;tray-transparent = true
2593 ;tray-background = #0063ff
2594 tray-maxsize = 18
2595
2596 wm-restack = bspwm
2597
2598 ;override-redirect = true
2599
2600 scroll-up = bspwm-desknext
2601 scroll-down = bspwm-deskprev
2602
2603 [module/xwindow]
2604 type = internal/xwindow
2605 label = %title:0:50:...%
2606
2607 [module/xkeyboard]
2608 type = internal/xkeyboard
2609 blacklist-0 = num lock
2610
2611 format-prefix = " "
2612 format-prefix-foreground = ${colors.foreground-alt}
2613 format-prefix-underline = ${colors.secondary}
2614
2615 label-layout = %layout%
2616 label-layout-underline = ${colors.secondary}
2617
2618 label-indicator-padding = 2
2619 label-indicator-margin = 1
2620 label-indicator-background = ${colors.secondary}
2621 label-indicator-underline = ${colors.secondary}
2622
2623 [module/filesystem]
2624 type = internal/fs
2625 interval = 25
2626
2627 mount-0 = /
2628
2629 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2630 label-unmounted = %mountpoint% not mounted
2631 label-unmounted-foreground = ${colors.foreground-alt}
2632
2633 [module/bspwm]
2634 type = internal/bspwm
2635
2636 label-focused = %index%
2637 label-focused-background = ${colors.background-alt}
2638 label-focused-underline= ${colors.primary}
2639 label-focused-padding = 2
2640
2641 label-occupied = %index%
2642 label-occupied-padding = 2
2643
2644 label-urgent = %index%!
2645 label-urgent-background = ${colors.alert}
2646 label-urgent-padding = 2
2647
2648 label-empty = %index%
2649 label-empty-foreground = ${colors.foreground-alt}
2650 label-empty-padding = 2
2651
2652 [module/i3]
2653 type = internal/i3
2654 format = <label-state> <label-mode>
2655 index-sort = true
2656 wrapping-scroll = false
2657
2658 ; Only show workspaces on the same output as the bar
2659 ;pin-workspaces = true
2660
2661 label-mode-padding = 2
2662 label-mode-foreground = #000
2663 label-mode-background = ${colors.primary}
2664
2665 ; focused = Active workspace on focused monitor
2666 label-focused = %index%
2667 label-focused-background = ${module/bspwm.label-focused-background}
2668 label-focused-underline = ${module/bspwm.label-focused-underline}
2669 label-focused-padding = ${module/bspwm.label-focused-padding}
2670
2671 ; unfocused = Inactive workspace on any monitor
2672 label-unfocused = %index%
2673 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2674
2675 ; visible = Active workspace on unfocused monitor
2676 label-visible = %index%
2677 label-visible-background = ${self.label-focused-background}
2678 label-visible-underline = ${self.label-focused-underline}
2679 label-visible-padding = ${self.label-focused-padding}
2680
2681 ; urgent = Workspace with urgency hint set
2682 label-urgent = %index%
2683 label-urgent-background = ${module/bspwm.label-urgent-background}
2684 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2685
2686 [module/mpd]
2687 type = internal/mpd
2688 format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2689
2690 icon-prev = 
2691 icon-stop = 
2692 icon-play = 
2693 icon-pause = 
2694 icon-next = 
2695
2696 label-song-maxlen = 25
2697 label-song-ellipsis = true
2698
2699 [module/xbacklight]
2700 type = internal/xbacklight
2701
2702 format = <label> <bar>
2703 label = BL
2704
2705 bar-width = 10
2706 bar-indicator = |
2707 bar-indicator-foreground = #ff
2708 bar-indicator-font = 2
2709 bar-fill = ─
2710 bar-fill-font = 2
2711 bar-fill-foreground = #9f78e1
2712 bar-empty = ─
2713 bar-empty-font = 2
2714 bar-empty-foreground = ${colors.foreground-alt}
2715
2716 [module/backlight-acpi]
2717 inherit = module/xbacklight
2718 type = internal/backlight
2719 ;card = intel_backlight
2720 card = mba6x_backlight
2721
2722 [module/cpu]
2723 type = internal/cpu
2724 interval = 2
2725 format-prefix = " "
2726 format-prefix-foreground = ${colors.foreground-alt}
2727 format-underline = #f90000
2728 label = %percentage%%
2729
2730 [module/memory]
2731 type = internal/memory
2732 interval = 2
2733 format-prefix = " "
2734 format-prefix-foreground = ${colors.foreground-alt}
2735 format-underline = #4bffdc
2736 label = %percentage_used%%
2737
2738 [module/wlan]
2739 type = internal/network
2740 interface =
2741 interval = 3.0
2742
2743 format-connected = <ramp-signal> <label-connected>
2744 format-connected-underline = #9f78e1
2745 label-connected = %essid%
2746
2747 format-disconnected =
2748 ;format-disconnected = <label-disconnected>
2749 ;format-disconnected-underline = ${self.format-connected-underline}
2750 ;label-disconnected = %ifname% disconnected
2751 ;label-disconnected-foreground = ${colors.foreground-alt}
2752
2753 ramp-signal-0 = 
2754 ramp-signal-1 = 
2755 ramp-signal-2 = 
2756 ramp-signal-3 = 
2757 ramp-signal-4 = 
2758 ramp-signal-foreground = ${colors.foreground-alt}
2759
2760 [module/eth]
2761 type = internal/network
2762 interface =
2763 interval = 3.0
2764
2765 format-connected-underline = #55aa55
2766 format-connected-prefix = " "
2767 format-connected-prefix-foreground = ${colors.foreground-alt}
2768 label-connected = %local_ip%
2769
2770 format-disconnected =
2771 ;format-disconnected = <label-disconnected>
2772 ;format-disconnected-underline = ${self.format-connected-underline}
2773 ;label-disconnected = %ifname% disconnected
2774 ;label-disconnected-foreground = ${colors.foreground-alt}
2775
2776 [module/date]
2777 type = internal/date
2778 interval = 5
2779
2780 date =
2781 date-alt = " %Y-%m-%d"
2782
2783 time = %H:%M
2784 time-alt = %H:%M:%S
2785
2786 format-prefix = 
2787 format-prefix-foreground = ${colors.foreground-alt}
2788 format-underline = #0a6cf5
2789
2790 label = %date% %time%
2791
2792 [module/volume]
2793 type = internal/volume
2794
2795 format-volume = <label-volume> <bar-volume>
2796 label-volume = vol
2797 label-volume-foreground = ${root.foreground}
2798
2799 format-muted-prefix = " "
2800 format-muted-foreground = ${colors.foreground-alt}
2801 label-muted = mute
2802
2803 bar-volume-width = 10
2804 bar-volume-foreground-0 = #55aa55
2805 bar-volume-foreground-1 = #55aa55
2806 bar-volume-foreground-2 = #55aa55
2807 bar-volume-foreground-3 = #55aa55
2808 bar-volume-foreground-4 = #55aa55
2809 bar-volume-foreground-5 = #f5a70a
2810 bar-volume-foreground-6 = #ff5555
2811 bar-volume-gradient = false
2812 bar-volume-indicator = |
2813 bar-volume-indicator-font = 2
2814 bar-volume-fill = ─
2815 bar-volume-fill-font = 2
2816 bar-volume-empty = ─
2817 bar-volume-empty-font = 2
2818 bar-volume-empty-foreground = ${colors.foreground-alt}
2819
2820 [module/battery]
2821 type = internal/battery
2822 battery = BAT0
2823 adapter = ADP1
2824 full-at = 64
2825
2826 format-charging = <animation-charging> <label-charging>
2827 format-charging-underline = #ffb52a
2828
2829 format-discharging = <ramp-capacity> <label-discharging>
2830 format-discharging-underline = ${self.format-charging-underline}
2831
2832 format-full-prefix = " "
2833 format-full-prefix-foreground = ${colors.foreground-alt}
2834 format-full-underline = ${self.format-charging-underline}
2835
2836 ramp-capacity-0 = 
2837 ramp-capacity-1 = 
2838 ramp-capacity-2 = 
2839 ramp-capacity-foreground = ${colors.foreground-alt}
2840
2841 animation-charging-0 = 
2842 animation-charging-1 = 
2843 animation-charging-2 = 
2844 animation-charging-foreground = ${colors.foreground-alt}
2845 animation-charging-framerate = 750
2846
2847 [module/temperature]
2848 type = internal/temperature
2849 thermal-zone = 1
2850 warn-temperature = 66
2851
2852 format = <ramp> <label>
2853 format-underline = #f50a4d
2854 format-warn = <ramp> <label-warn>
2855 format-warn-underline = ${self.format-underline}
2856
2857 label = %temperature%
2858 label-warn = %temperature%
2859 label-warn-foreground = ${colors.secondary}
2860
2861 ramp-0 = 
2862 ramp-1 = 
2863 ramp-2 = 
2864 ramp-foreground = ${colors.foreground-alt}
2865
2866 [module/powermenu]
2867 type = custom/menu
2868
2869 format-spacing = 1
2870
2871 label-open = 
2872 label-open-foreground = ${colors.secondary}
2873 label-close =  cancel
2874 label-close-foreground = ${colors.secondary}
2875 label-separator = |
2876 label-separator-foreground = ${colors.foreground-alt}
2877
2878 menu-0-0 = reboot
2879 menu-0-0-exec = menu-open-1
2880 menu-0-1 = power off
2881 menu-0-1-exec = menu-open-2
2882
2883 menu-1-0 = cancel
2884 menu-1-0-exec = menu-open-0
2885 menu-1-1 = reboot
2886 menu-1-1-exec = sudo reboot
2887
2888 menu-2-0 = power off
2889 menu-2-0-exec = sudo poweroff
2890 menu-2-1 = cancel
2891 menu-2-1-exec = menu-open-0
2892
2893 [module/mail]
2894 type = custom/script
2895 interval = 60
2896 format = <label>
2897 format-prefix = " "
2898 format-prefix-foreground = ${colors.foreground-alt}
2899 format-underline = #0a6cf5
2900 exec = notmuch count tag:unread
2901
2902 [settings]
2903 screenchange-reload = true
2904 ;compositing-background = xor
2905 ;compositing-background = screen
2906 ;compositing-foreground = source
2907 ;compositing-border = over
2908
2909 [global/wm]
2910 margin-top = 0
2911 margin-bottom = 0
2912
2913 ; vim:ft=dosini
2914 #+end_src
2915
2916 *** polybar-launch
2917 :PROPERTIES:
2918 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2919 :END:
2920
2921 #+begin_src sh :tangle no
2922 # Terminate already running bar instances
2923 killall -q polybar
2924
2925 # Wait until the processes have been shut down
2926 while pgrep -x polybar >/dev/null; do sleep 1; done
2927
2928 # Launch main bar
2929 polybar main &
2930
2931 echo "Bars launched..."
2932 #+end_src
2933
2934 ** PowerTOP
2935 :PROPERTIES:
2936 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2937 :END:
2938
2939 #+begin_src conf
2940 [Unit]
2941 Description=Powertop tunings
2942
2943 [Service]
2944 ExecStart=/usr/bin/powertop --auto-tune
2945 RemainAfterExit=true
2946
2947 [Install]
2948 WantedBy=multi-user.target
2949 #+end_src
2950
2951 ** ranger
2952
2953 *** rc.conf
2954 :PROPERTIES:
2955 :header-args+: :tangle ~/.config/ranger/rc.conf
2956 :END:
2957
2958 #+begin_src conf :tangle no
2959 # ===================================================================
2960 # This file contains the default startup commands for ranger.
2961 # To change them, it is recommended to create the file
2962 # ~/.config/ranger/rc.conf and add your custom commands there.
2963 #
2964 # If you copy this whole file there, you may want to set the environment
2965 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2966 #
2967 # The purpose of this file is mainly to define keybindings and settings.
2968 # For running more complex python code, please create a plugin in "plugins/" or
2969 # a command in "commands.py".
2970 #
2971 # Each line is a command that will be run before the user interface
2972 # is initialized. As a result, you can not use commands which rely
2973 # on the UI such as :delete or :mark.
2974 # ===================================================================
2975
2976 # ===================================================================
2977 # == Options
2978 # ===================================================================
2979
2980 # How many columns are there, and what are their relative widths?
2981 set column_ratios 1,3,4
2982
2983 # Which files should be hidden? (regular expression)
2984 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2985
2986 # Show hidden files? You can toggle this by typing 'zh'
2987 set show_hidden false
2988
2989 # Ask for a confirmation when running the "delete" command?
2990 # Valid values are "always" (default), "never", "multiple"
2991 # With "multiple", ranger will ask only if you delete multiple files at once.
2992 set confirm_on_delete multiple
2993
2994 # Which script is used to generate file previews?
2995 # ranger ships with scope.sh, a script that calls external programs (see
2996 # README for dependencies) to preview images, archives, etc.
2997 set preview_script ~/.config/ranger/scope.sh
2998
2999 # Use the external preview script or display simple plain text previews?
3000 set use_preview_script true
3001
3002 # Open all images in this directory when running certain image viewers
3003 # like feh or sxiv? You can still open selected files by marking them.
3004 set open_all_images true
3005
3006 # Be aware of version control systems and display information.
3007 set vcs_aware false
3008
3009 # State of the three backends git, hg, bzr. The possible states are
3010 # disabled, local (only show local info), enabled (show local and remote
3011 # information).
3012 set vcs_backend_git enabled
3013 set vcs_backend_hg disabled
3014 set vcs_backend_bzr disabled
3015
3016 # Preview images in full color with the external command "w3mimgpreview"?
3017 # This requires the console web browser "w3m" and a supported terminal.
3018 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3019 set preview_images true
3020
3021 # Use a unicode "..." character to mark cut-off filenames?
3022 set unicode_ellipsis false
3023
3024 # Show dotfiles in the bookmark preview box?
3025 set show_hidden_bookmarks true
3026
3027 # Which colorscheme to use? These colorschemes are available by default:
3028 # default, jungle, snow
3029 set colorscheme default
3030
3031 # Preview files on the rightmost column?
3032 # And collapse (shrink) the last column if there is nothing to preview?
3033 set preview_files true
3034 set preview_directories true
3035 set collapse_preview true
3036
3037 # Save the console history on exit?
3038 set save_console_history true
3039
3040 # Draw the status bar on top of the browser window (default: bottom)
3041 set status_bar_on_top false
3042
3043 # Draw a progress bar in the status bar which displays the average state of all
3044 # currently running tasks which support progress bars?
3045 set draw_progress_bar_in_status_bar true
3046
3047 # Draw borders around columns?
3048 set draw_borders true
3049
3050 # Display the directory name in tabs?
3051 set dirname_in_tabs false
3052
3053 # Enable the mouse support?
3054 set mouse_enabled true
3055
3056 # Display the file size in the main column or status bar?
3057 set display_size_in_main_column true
3058 set display_size_in_status_bar true
3059
3060 # Display files tags in all columns or only in main column?
3061 set display_tags_in_all_columns true
3062
3063 # Set a title for the window?
3064 set update_title false
3065
3066 # Set the title to "ranger" in the tmux program?
3067 set update_tmux_title false
3068
3069 # Shorten the title if it gets long? The number defines how many
3070 # directories are displayed at once, 0 turns off this feature.
3071 set shorten_title 3
3072
3073 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3074 set tilde_in_titlebar false
3075
3076 # How many directory-changes or console-commands should be kept in history?
3077 set max_history_size 20
3078 set max_console_history_size 50
3079
3080 # Try to keep so much space between the top/bottom border when scrolling:
3081 set scroll_offset 8
3082
3083 # Flush the input after each key hit? (Noticable when ranger lags)
3084 set flushinput true
3085
3086 # Padding on the right when there's no preview?
3087 # This allows you to click into the space to run the file.
3088 set padding_right true
3089
3090 # Save bookmarks (used with mX and `X) instantly?
3091 # This helps to synchronize bookmarks between multiple ranger
3092 # instances but leads to *slight* performance loss.
3093 # When false, bookmarks are saved when ranger is exited.
3094 set autosave_bookmarks true
3095
3096 # You can display the "real" cumulative size of directories by using the
3097 # command :get_cumulative_size or typing "dc". The size is expensive to
3098 # calculate and will not be updated automatically. You can choose
3099 # to update it automatically though by turning on this option:
3100 set autoupdate_cumulative_size false
3101
3102 # Turning this on makes sense for screen readers:
3103 set show_cursor false
3104
3105 # One of: size, basename, mtime, type
3106 set sort natural
3107
3108 # Additional sorting options
3109 set sort_reverse false
3110 set sort_case_insensitive true
3111 set sort_directories_first true
3112
3113 # Enable this if key combinations with the Alt Key don't work for you.
3114 # (Especially on xterm)
3115 set xterm_alt_key false
3116
3117 # ===================================================================
3118 # == Local Options
3119 # ===================================================================
3120 # You can set local options that only affect a single directory.
3121
3122 # Examples:
3123 # setlocal path=~/downloads sort mtime
3124
3125 # ===================================================================
3126 # == Command Aliases in the Console
3127 # ===================================================================
3128
3129 alias e edit
3130 alias q quit
3131 alias q! quitall
3132 alias qall quitall
3133 alias setl setlocal
3134
3135 alias filter scout -prt
3136 alias find scout -aet
3137 alias mark scout -mr
3138 alias unmark scout -Mr
3139 alias search scout -rs
3140 alias search_inc scout -rts
3141 alias travel scout -aefiklst
3142
3143 # ===================================================================
3144 # == Define keys for the browser
3145 # ===================================================================
3146
3147 # Basic
3148 map Q quit!
3149 map q quit
3150 copymap q ZZ ZQ
3151
3152 map R reload_cwd
3153 map <C-r> reset
3154 map <C-l> redraw_window
3155 map <C-c> abort
3156 map <esc> change_mode normal
3157
3158 map i display_file
3159 map ? help
3160 map W display_log
3161 map w taskview_open
3162 map S shell $SHELL
3163
3164 map : console
3165 map ; console
3166 map ! console shell
3167 map @ console -p6 shell %%s
3168 map # console shell -p
3169 map s console shell
3170 map r chain draw_possible_programs; console open_with
3171 map f console find
3172 map cd console cd
3173
3174 # Tagging / Marking
3175 map t tag_toggle
3176 map ut tag_remove
3177 map "<any> tag_toggle tag=%any
3178 map <Space> mark_files toggle=True
3179 map v mark_files all=True toggle=True
3180 map uv mark_files all=True val=False
3181 map V toggle_visual_mode
3182 map uV toggle_visual_mode reverse=True
3183
3184 # For the nostalgics: Midnight Commander bindings
3185 map <F1> help
3186 map <F3> display_file
3187 map <F4> edit
3188 map <F5> copy
3189 map <F6> cut
3190 map <F7> console mkdir
3191 map <F8> console delete
3192 map <F10> exit
3193
3194 # In case you work on a keyboard with dvorak layout
3195 map <UP> move up=1
3196 map <DOWN> move down=1
3197 map <LEFT> move left=1
3198 map <RIGHT> move right=1
3199 map <HOME> move to=0
3200 map <END> move to=-1
3201 map <PAGEDOWN> move down=1 pages=True
3202 map <PAGEUP> move up=1 pages=True
3203 map <CR> move right=1
3204 map <DELETE> console delete
3205 map <INSERT> console touch
3206
3207 # VIM-like
3208 copymap <UP> k
3209 copymap <DOWN> j
3210 copymap <LEFT> h
3211 copymap <RIGHT> l
3212 copymap <HOME> gg
3213 copymap <END> G
3214 copymap <PAGEDOWN> <C-F>
3215 copymap <PAGEUP> <C-B>
3216
3217 map J move down=0.5 pages=True
3218 map K move up=0.5 pages=True
3219 copymap J <C-D>
3220 copymap K <C-U>
3221
3222 # Jumping around
3223 map H history_go -1
3224 map L history_go 1
3225 map ] move_parent 1
3226 map [ move_parent -1
3227 map } traverse
3228
3229 map gh cd ~
3230 map ge cd /etc
3231 map gu cd /usr
3232 map gd cd /dev
3233 map gl cd -r .
3234 map gL cd -r %f
3235 map go cd /opt
3236 map gv cd /var
3237 map gm cd /media
3238 map gM cd /mnt
3239 map gs cd /srv
3240 map gr cd /
3241 map gR eval fm.cd(ranger.RANGERDIR)
3242 map g/ cd /
3243 map g? cd /usr/share/doc/ranger
3244
3245 # External Programs
3246 map E edit
3247 map du shell -p du --max-depth=1 -h --apparent-size
3248 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3249 map yp shell -d echo -n %d/%f | xsel -i
3250 map yd shell -d echo -n %d | xsel -i
3251 map yn shell -d echo -n %f | xsel -i
3252
3253 # Filesystem Operations
3254 map = chmod
3255
3256 map cw console rename
3257 map A eval fm.open_console('rename ' + fm.thisfile.basename)
3258 map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3259
3260 map pp paste
3261 map po paste overwrite=True
3262 map pl paste_symlink relative=False
3263 map pL paste_symlink relative=True
3264 map phl paste_hardlink
3265 map pht paste_hardlinked_subtree
3266
3267 map dd cut
3268 map ud uncut
3269 map da cut mode=add
3270 map dr cut mode=remove
3271
3272 map yy copy
3273 map uy uncut
3274 map ya copy mode=add
3275 map yr copy mode=remove
3276
3277 # Temporary workarounds
3278 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3279 map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3280 map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3281 map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3282 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3283 map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3284 map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3285 map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3286
3287 # Searching
3288 map / console search
3289 map n search_next
3290 map N search_next forward=False
3291 map ct search_next order=tag
3292 map cs search_next order=size
3293 map ci search_next order=mimetype
3294 map cc search_next order=ctime
3295 map cm search_next order=mtime
3296 map ca search_next order=atime
3297
3298 # Tabs
3299 map <C-n> tab_new ~
3300 map <C-w> tab_close
3301 map <TAB> tab_move 1
3302 map <S-TAB> tab_move -1
3303 map <A-Right> tab_move 1
3304 map <A-Left> tab_move -1
3305 map gt tab_move 1
3306 map gT tab_move -1
3307 map gn tab_new ~
3308 map gc tab_close
3309 map uq tab_restore
3310 map <a-1> tab_open 1
3311 map <a-2> tab_open 2
3312 map <a-3> tab_open 3
3313 map <a-4> tab_open 4
3314 map <a-5> tab_open 5
3315 map <a-6> tab_open 6
3316 map <a-7> tab_open 7
3317 map <a-8> tab_open 8
3318 map <a-9> tab_open 9
3319
3320 # Sorting
3321 map or toggle_option sort_reverse
3322 map os chain set sort=size; set sort_reverse=False
3323 map ob chain set sort=basename; set sort_reverse=False
3324 map on chain set sort=natural; set sort_reverse=False
3325 map om chain set sort=mtime; set sort_reverse=False
3326 map oc chain set sort=ctime; set sort_reverse=False
3327 map oa chain set sort=atime; set sort_reverse=False
3328 map ot chain set sort=type; set sort_reverse=False
3329
3330 map oS chain set sort=size; set sort_reverse=True
3331 map oB chain set sort=basename; set sort_reverse=True
3332 map oN chain set sort=natural; set sort_reverse=True
3333 map oM chain set sort=mtime; set sort_reverse=True
3334 map oC chain set sort=ctime; set sort_reverse=True
3335 map oA chain set sort=atime; set sort_reverse=True
3336 map oT chain set sort=type; set sort_reverse=True
3337
3338 map dc get_cumulative_size
3339
3340 # Settings
3341 map zc toggle_option collapse_preview
3342 map zd toggle_option sort_directories_first
3343 map zh toggle_option show_hidden
3344 map <C-h> toggle_option show_hidden
3345 map zi toggle_option flushinput
3346 map zm toggle_option mouse_enabled
3347 map zp toggle_option preview_files
3348 map zP toggle_option preview_directories
3349 map zs toggle_option sort_case_insensitive
3350 map zu toggle_option autoupdate_cumulative_size
3351 map zv toggle_option use_preview_script
3352 map zf console filter
3353
3354 # Bookmarks
3355 map `<any> enter_bookmark %any
3356 map '<any> enter_bookmark %any
3357 map m<any> set_bookmark %any
3358 map um<any> unset_bookmark %any
3359
3360 map m<bg> draw_bookmarks
3361 copymap m<bg> um<bg> `<bg> '<bg>
3362
3363 # Generate all the chmod bindings with some python help:
3364 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3365 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3366 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3367 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3368 eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3369
3370 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3371 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3372 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3373 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3374 eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3375
3376 # ===================================================================
3377 # == Define keys for the console
3378 # ===================================================================
3379 # Note: Unmapped keys are passed directly to the console.
3380
3381 # Basic
3382 cmap <tab> eval fm.ui.console.tab()
3383 cmap <s-tab> eval fm.ui.console.tab(-1)
3384 cmap <ESC> eval fm.ui.console.close()
3385 cmap <CR> eval fm.ui.console.execute()
3386 cmap <C-l> redraw_window
3387
3388 copycmap <ESC> <C-c>
3389 copycmap <CR> <C-j>
3390
3391 # Move around
3392 cmap <up> eval fm.ui.console.history_move(-1)
3393 cmap <down> eval fm.ui.console.history_move(1)
3394 cmap <left> eval fm.ui.console.move(left=1)
3395 cmap <right> eval fm.ui.console.move(right=1)
3396 cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3397 cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3398
3399 # Line Editing
3400 cmap <backspace> eval fm.ui.console.delete(-1)
3401 cmap <delete> eval fm.ui.console.delete(0)
3402 cmap <C-w> eval fm.ui.console.delete_word()
3403 cmap <C-k> eval fm.ui.console.delete_rest(1)
3404 cmap <C-u> eval fm.ui.console.delete_rest(-1)
3405 cmap <C-y> eval fm.ui.console.paste()
3406
3407 # And of course the emacs way
3408 copycmap <up> <C-p>
3409 copycmap <down> <C-n>
3410 copycmap <left> <C-b>
3411 copycmap <right> <C-f>
3412 copycmap <home> <C-a>
3413 copycmap <end> <C-e>
3414 copycmap <delete> <C-d>
3415 copycmap <backspace> <C-h>
3416
3417 # Note: There are multiple ways to express backspaces. <backspace> (code 263)
3418 # and <backspace2> (code 127). To be sure, use both.
3419 copycmap <backspace> <backspace2>
3420
3421 # This special expression allows typing in numerals:
3422 cmap <allow_quantifiers> false
3423
3424 # ===================================================================
3425 # == Pager Keybindings
3426 # ===================================================================
3427
3428 # Movement
3429 pmap <down> pager_move down=1
3430 pmap <up> pager_move up=1
3431 pmap <left> pager_move left=4
3432 pmap <right> pager_move right=4
3433 pmap <home> pager_move to=0
3434 pmap <end> pager_move to=-1
3435 pmap <pagedown> pager_move down=1.0 pages=True
3436 pmap <pageup> pager_move up=1.0 pages=True
3437 pmap <C-d> pager_move down=0.5 pages=True
3438 pmap <C-u> pager_move up=0.5 pages=True
3439
3440 copypmap <UP> k <C-p>
3441 copypmap <DOWN> j <C-n> <CR>
3442 copypmap <LEFT> h
3443 copypmap <RIGHT> l
3444 copypmap <HOME> g
3445 copypmap <END> G
3446 copypmap <C-d> d
3447 copypmap <C-u> u
3448 copypmap <PAGEDOWN> n f <C-F> <Space>
3449 copypmap <PAGEUP> p b <C-B>
3450
3451 # Basic
3452 pmap <ESC> pager_close
3453 copypmap <ESC> q Q i <F3>
3454 pmap E edit_file
3455
3456 # ===================================================================
3457 # == Taskview Keybindings
3458 # ===================================================================
3459
3460 # Movement
3461 tmap <up> taskview_move up=1
3462 tmap <down> taskview_move down=1
3463 tmap <home> taskview_move to=0
3464 tmap <end> taskview_move to=-1
3465 tmap <pagedown> taskview_move down=1.0 pages=True
3466 tmap <pageup> taskview_move up=1.0 pages=True
3467 tmap <C-d> taskview_move down=0.5 pages=True
3468 tmap <C-u> taskview_move up=0.5 pages=True
3469
3470 copytmap <UP> k <C-p>
3471 copytmap <DOWN> j <C-n> <CR>
3472 copytmap <HOME> g
3473 copytmap <END> G
3474 copytmap <C-u> u
3475 copytmap <PAGEDOWN> n f <C-F> <Space>
3476 copytmap <PAGEUP> p b <C-B>
3477
3478 # Changing priority and deleting tasks
3479 tmap J eval -q fm.ui.taskview.task_move(-1)
3480 tmap K eval -q fm.ui.taskview.task_move(0)
3481 tmap dd eval -q fm.ui.taskview.task_remove()
3482 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3483 tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3484 tmap <delete> eval -q fm.ui.taskview.task_remove()
3485
3486 # Basic
3487 tmap <ESC> taskview_close
3488 copytmap <ESC> q Q w <C-c>
3489 #+end_src
3490
3491 *** scope.sh
3492 :PROPERTIES:
3493 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3494 :END:
3495
3496 #+begin_src sh :tangle no
3497 # ranger supports enhanced previews. If the option "use_preview_script"
3498 # is set to True and this file exists, this script will be called and its
3499 # output is displayed in ranger. ANSI color codes are supported.
3500
3501 # NOTES: This script is considered a configuration file. If you upgrade
3502 # ranger, it will be left untouched. (You must update it yourself.)
3503 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3504
3505 # Meanings of exit codes:
3506 # code | meaning | action of ranger
3507 # -----+------------+-------------------------------------------
3508 # 0 | success | success. display stdout as preview
3509 # 1 | no preview | failure. display no preview at all
3510 # 2 | plain text | display the plain content of the file
3511 # 3 | fix width | success. Don't reload when width changes
3512 # 4 | fix height | success. Don't reload when height changes
3513 # 5 | fix both | success. Don't ever reload
3514
3515 # Meaningful aliases for arguments:
3516 path="$1" # Full path of the selected file
3517 width="$2" # Width of the preview pane (number of fitting characters)
3518 height="$3" # Height of the preview pane (number of fitting characters)
3519
3520 maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3521
3522 # Find out something about the file:
3523 mimetype=$(file --mime-type -Lb "$path")
3524 extension=${path##*.}
3525
3526 # Functions:
3527 # runs a command and saves its output into $output. Useful if you need
3528 # the return value AND want to use the output in a pipe
3529 try() { output=$(eval '"$@"'); }
3530
3531 # writes the output of the previouosly used "try" command
3532 dump() { echo "$output"; }
3533
3534 # a common post-processing function used after most commands
3535 trim() { head -n "$maxln"; }
3536
3537 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3538 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3539
3540 case "$extension" in
3541 # Archive extensions:
3542 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3543 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3544 try als "$path" && { dump | trim; exit 0; }
3545 try acat "$path" && { dump | trim; exit 3; }
3546 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3547 exit 1;;
3548 rar)
3549 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3550 # PDF documents:
3551 pdf)
3552 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3553 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3554 # BitTorrent Files
3555 torrent)
3556 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3557 # HTML Pages:
3558 htm|html|xhtml)
3559 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3560 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3561 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3562 ;; # fall back to highlight/cat if the text browsers fail
3563 esac
3564
3565 case "$mimetype" in
3566 # Syntax highlight for text files:
3567 text/* | */xml)
3568 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3569 # Ascii-previews of images:
3570 image/*)
3571 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3572 # Display information about media files:
3573 video/* | audio/*)
3574 exiftool "$path" && exit 5
3575 # Use sed to remove spaces so the output fits into the narrow window
3576 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3577 esac
3578
3579 exit 1
3580 #+end_src
3581
3582 ** redshift
3583 :PROPERTIES:
3584 :header-args+: :tangle ~/.config/redshift.conf :comments none
3585 :END:
3586
3587 #+begin_src conf
3588 ; Global settings for redshift
3589 [redshift]
3590 ; Set the day and night screen temperatures (Neutral is 6500K)
3591 ;temp-day=5700
3592 ;temp-night=3500
3593
3594 ;temp-day=6500
3595 temp-day=6200
3596 ;temp-night=4800
3597 ;temp-night=5000
3598 ;temp-night=4500
3599 temp-night=4000
3600
3601 ; Enable/Disable a smooth transition between day and night
3602 ; 0 will cause a direct change from day to night screen temperature.
3603 ; 1 will gradually increase or decrease the screen temperature.
3604 transition=1
3605
3606 ; Set the screen brightness. Default is 1.0.
3607 ;brightness=0.9
3608 ; It is also possible to use different settings for day and night
3609 ; since version 1.8.
3610 ;brightness-day=0.7
3611 ;brightness-night=0.4
3612 ; Set the screen gamma (for all colors, or each color channel
3613 ; individually)
3614 ;gamma=0.8
3615 ;gamma=1.0
3616 ;gamma=0.8:0.7:0.8
3617 ; This can also be set individually for day and night since
3618 ; version 1.10.
3619 ;gamma-day=0.8:0.7:0.8
3620 ;gamma-night=0.6
3621
3622 ; Set the location-provider: 'geoclue2' or 'manual'
3623 ; type 'redshift -l list' to see possible values.
3624 ; The location provider settings are in a different section.
3625 ;location-provider=manual
3626 location-provider=geoclue2
3627
3628 ; Set the adjustment-method: 'randr', 'vidmode'
3629 ; type 'redshift -m list' to see all possible values.
3630 ; 'randr' is the preferred method, 'vidmode' is an older API.
3631 ; but works in some cases when 'randr' does not.
3632 ; The adjustment method settings are in a different section.
3633 adjustment-method=randr
3634
3635 ; Configuration of the location-provider:
3636 ; type 'redshift -l PROVIDER:help' to see the settings.
3637 ; ex: 'redshift -l manual:help'
3638 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3639 ; are negative numbers.
3640 ;[manual]
3641 ;lat=48.1
3642 ;lon=11.6
3643
3644 ; Configuration of the adjustment-method
3645 ; type 'redshift -m METHOD:help' to see the settings.
3646 ; ex: 'redshift -m randr:help'
3647 ; In this example, randr is configured to adjust screen 1.
3648 ; Note that the numbering starts from 0, so this is actually the
3649 ; second screen. If this option is not specified, Redshift will try
3650 ; to adjust _all_ screens.
3651 ;[randr]
3652 ;screen=1
3653 #+end_src
3654
3655 ** rofi
3656 :PROPERTIES:
3657 :header-args+: :tangle ~/.config/rofi/config
3658 :END:
3659
3660 #+begin_src conf
3661 ! rofi.font: Ubuntu Mono 13
3662 ! rofi.font: Inconsolata 16
3663 ! rofi.font: Iosevka 13
3664 ! rofi.font: Source Code Pro 11
3665 rofi.font: Source Code Pro 10.5
3666 rofi.modi: run,window
3667 ! rofi.width: 640
3668 rofi.width: 600
3669 !rofi.location: 2
3670 !rofi.yoffset: 200
3671 rofi.monitor: -1
3672 !rofi.lines: 10
3673
3674 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3675 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3676 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3677
3678 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3679 #+end_src
3680
3681 ** rofi-pass
3682 :PROPERTIES:
3683 :header-args+: :tangle ~/.config/rofi-pass/config
3684 :END:
3685
3686 #+begin_src conf
3687 # permanently set alternative root dir
3688 # root=/path/to/root
3689
3690 # rofi command. Make sure to have "$@" as last argument
3691 _rofi () {
3692 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3693 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3694 }
3695
3696 # xdotool needs the keyboard layout to be set using setxkbmap
3697 # You can do this in your autostart scripts (e.g. xinitrc)
3698
3699 # If for some reason, you cannot do this, you can set the command here.
3700 # and set fix_layout to true
3701 fix_layout=false
3702
3703 layout_cmd () {
3704 setxkbmap us
3705 }
3706
3707 # fields to be used
3708 URL_field='url'
3709 USERNAME_field='user'
3710 AUTOTYPE_field='autotype'
3711
3712 # delay to be used for :delay keyword
3713 delay=2
3714
3715 ## Programs to be used
3716 # Editor
3717 EDITOR='gvim -f'
3718
3719 # Browser
3720 BROWSER='chromium'
3721
3722 ## Misc settings
3723
3724 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3725 auto_enter='false'
3726 notify='false'
3727 default_autotype='user :tab pass'
3728
3729 # color of the help messages
3730 # leave empty for autodetection
3731 help_color="#4872FF"
3732
3733 # Clipboard settings
3734 # Possible options: primary, clipboard, both
3735 clip=primary
3736
3737 # Options for generating new password entries
3738 # default_user is also used for password files that have no user field.
3739 default_user=aminb
3740 default_user2=aminban
3741 password_length=30
3742
3743 # Custom Keybindings
3744 #autotype="Alt+1"
3745 autotype="Alt+m"
3746 type_user="Alt+2"
3747 type_pass="Alt+3"
3748 open_url="Alt+4"
3749 copy_name="Alt+u"
3750 copy_url="Alt+l"
3751 copy_pass="Alt+p"
3752 show="Alt+o"
3753 copy_entry="Alt+2"
3754 type_entry="Alt+1"
3755 copy_menu="Alt+c"
3756 action_menu="Alt+a"
3757 type_menu="Alt+t"
3758 help="Alt+h"
3759 switch="Alt+x"
3760 insert_pass="Alt+n"
3761 #+end_src
3762
3763 ** sway
3764
3765 *** main
3766 :PROPERTIES:
3767 :header-args+: :tangle ~/.config/sway/config
3768 :END:
3769
3770 #+begin_src conf
3771 ### Variables
3772 # super
3773 set $mod Mod4
3774 # alt
3775 set $mod2 Mod1
3776 set $left h
3777 set $down j
3778 set $up k
3779 set $right l
3780 set $term urxvt
3781 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3782
3783 ### Output configuration
3784 #
3785 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3786 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3787 #
3788 # Example configuration:
3789 #
3790 # output HDMI-A-1 resolution 1920x1080 position 1920,0
3791 #
3792 # You can get the names of your outputs by running: swaymsg -t get_outputs
3793
3794 ### Idle configuration
3795
3796 exec swayidle \
3797 timeout 120 'swaymsg "output * dpms off"' \
3798 resume 'swaymsg "output * dpms on"' \
3799 before-sleep swaylock
3800
3801
3802 ### Key bindings
3803 #
3804 # Basics:
3805 #
3806 # start a terminal
3807 bindsym $mod+Return exec $term
3808
3809 # kill focused window
3810 bindsym $mod+Shift+q kill
3811
3812 # start your launcher
3813 bindsym $mod+d exec $menu
3814
3815 # password manager
3816 bindsym $mod2+space exec rofi-pass
3817
3818 # Drag floating windows by holding down $mod and left mouse button.
3819 # Resize them with right mouse button + $mod.
3820 # Despite the name, also works for non-floating windows.
3821 # Change normal to inverse to use left mouse button for resizing and right
3822 # mouse button for dragging.
3823 floating_modifier $mod normal
3824
3825 # reload the configuration file
3826 bindsym $mod+Shift+c reload
3827
3828 # exit sway (logs you out of your wayland session)
3829 bindsym $mod+Shift+e exit
3830
3831 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3832 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3833 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3834
3835 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3836 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3837 bindsym XF86AudioMute exec pamixer --toggle-mute
3838 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3839
3840 # original sway workspace switch and window move
3841 bindsym $mod+bracketleft workspace prev
3842 bindsym $mod+bracketright workspace next
3843 bindsym $mod+braceleft move container to workspace prev
3844 bindsym $mod+braceright move container to workspace next
3845
3846 # bspwm-esque workspace switch and window move
3847 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3848 bindsym $mod2+bracketright exec sway-ws-util switch next
3849 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3850 bindsym $mod2+braceright exec sway-ws-util move next follow
3851 #
3852 # Moving around:
3853 #
3854 # Move your focus around
3855 bindsym $mod+$left focus left
3856 bindsym $mod+$down focus down
3857 bindsym $mod+$up focus up
3858 bindsym $mod+$right focus right
3859 # or use $mod+[up|down|left|right]
3860 bindsym $mod+Left focus left
3861 bindsym $mod+Down focus down
3862 bindsym $mod+Up focus up
3863 bindsym $mod+Right focus right
3864
3865 # _move_ the focused window with the same, but add Shift
3866 bindsym $mod+Shift+$left move left
3867 bindsym $mod+Shift+$down move down
3868 bindsym $mod+Shift+$up move up
3869 bindsym $mod+Shift+$right move right
3870 # ditto, with arrow keys
3871 bindsym $mod+Shift+Left move left
3872 bindsym $mod+Shift+Down move down
3873 bindsym $mod+Shift+Up move up
3874 bindsym $mod+Shift+Right move right
3875 #
3876 # Workspaces:
3877 #
3878 # switch to workspace
3879 bindsym $mod+1 workspace 1
3880 bindsym $mod+2 workspace 2
3881 bindsym $mod+3 workspace 3
3882 bindsym $mod+4 workspace 4
3883 bindsym $mod+5 workspace 5
3884 bindsym $mod+6 workspace 6
3885 bindsym $mod+7 workspace 7
3886 bindsym $mod+8 workspace 8
3887 bindsym $mod+9 workspace 9
3888 bindsym $mod+0 workspace 10
3889 # move focused container to workspace
3890 bindsym $mod+Shift+1 move container to workspace 1
3891 bindsym $mod+Shift+2 move container to workspace 2
3892 bindsym $mod+Shift+3 move container to workspace 3
3893 bindsym $mod+Shift+4 move container to workspace 4
3894 bindsym $mod+Shift+5 move container to workspace 5
3895 bindsym $mod+Shift+6 move container to workspace 6
3896 bindsym $mod+Shift+7 move container to workspace 7
3897 bindsym $mod+Shift+8 move container to workspace 8
3898 bindsym $mod+Shift+9 move container to workspace 9
3899 bindsym $mod+Shift+0 move container to workspace 10
3900 # Note: workspaces can have any name you want, not just numbers.
3901 # We just use 1-10 as the default.
3902 #
3903 # Layout stuff:
3904 #
3905 # You can "split" the current object of your focus with
3906 # $mod+b or $mod+v, for horizontal and vertical splits
3907 # respectively.
3908 bindsym $mod+b splith
3909 bindsym $mod+v splitv
3910
3911 # Switch the current container between different layout styles
3912 bindsym $mod+s layout stacking
3913 bindsym $mod+w layout tabbed
3914 bindsym $mod+e layout toggle split
3915
3916 # Make the current focus fullscreen
3917 bindsym $mod+f fullscreen
3918
3919 # Toggle the current focus between tiling and floating mode
3920 bindsym $mod+Shift+space floating toggle
3921
3922 # Swap focus between the tiling area and the floating area
3923 bindsym $mod+space focus mode_toggle
3924
3925 # move focus to the parent container
3926 bindsym $mod+a focus parent
3927 #
3928 # Scratchpad:
3929 #
3930 # Sway has a "scratchpad", which is a bag of holding for windows.
3931 # You can send windows there and get them back later.
3932
3933 # Move the currently focused window to the scratchpad
3934 bindsym $mod+Shift+minus move scratchpad
3935
3936 # Show the next scratchpad window or hide the focused scratchpad window.
3937 # If there are multiple scratchpad windows, this command cycles through them.
3938 bindsym $mod+minus scratchpad show
3939 #
3940 # Resizing containers:
3941 #
3942 mode "resize" {
3943 # left will shrink the containers width
3944 # right will grow the containers width
3945 # up will shrink the containers height
3946 # down will grow the containers height
3947 bindsym $left resize shrink width 10px
3948 bindsym $down resize grow height 10px
3949 bindsym $up resize shrink height 10px
3950 bindsym $right resize grow width 10px
3951
3952 # ditto, with arrow keys
3953 bindsym Left resize shrink width 10px
3954 bindsym Down resize grow height 10px
3955 bindsym Up resize shrink height 10px
3956 bindsym Right resize grow width 10px
3957
3958 # return to default mode
3959 bindsym Return mode "default"
3960 bindsym Escape mode "default"
3961 }
3962 bindsym $mod+Shift+r mode "resize"
3963
3964 #
3965 # Power button
3966 #
3967
3968 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
3969 mode "$mode_system" {
3970 bindsym l exec swaylock, mode "default"
3971 bindsym e exec swaymsg exit, mode "default"
3972 bindsym s exec systemctl suspend, mode "default"
3973 bindsym h exec systemctl hibernate, mode "default"
3974 bindsym r exec systemctl reboot, mode "default"
3975 bindsym Shift+s exec systemctl poweroff -i, mode "default"
3976
3977 # back to normal: Enter, Escape, or q
3978 bindsym Return mode "default"
3979 bindsym Escape mode "default"
3980 bindsym q mode "default"
3981 }
3982 bindsym XF86PowerOff mode "$mode_system"
3983
3984 #
3985 # Notifications
3986 #
3987
3988 bindsym $mod+Shift+n mode notifications
3989 mode notifications {
3990 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
3991 bindsym d exec makoctl dismiss; mode default
3992 bindsym Shift+d exec makoctl dismiss -a; mode default
3993
3994 bindsym Escape mode default
3995 bindsym q mode default
3996 }
3997
3998 #
3999 # Screenshotting
4000 #
4001
4002 bindsym $mod+Shift+s mode screenshot
4003 mode screenshot {
4004 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4005 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4006
4007 bindsym Escape mode default
4008 bindsym q mode default
4009 }
4010
4011 #
4012 # Status Bar:
4013 #
4014 # Read `man 5 sway-bar` for more information about this section.
4015 bar {
4016 position bottom
4017 colors {
4018 statusline #ffffff
4019 background #323232
4020 inactive_workspace #32323200 #32323200 #5c5c5c
4021 }
4022 status_command i3status
4023 }
4024
4025 # font pango: benis uushi 9
4026 # font pango: Ubuntu Mono 11
4027 # font pango: Inconsolata 11
4028 font pango: DejaVu Sans Mono 9
4029 # font pango: Liberation Mono 9
4030
4031 exec xrdb .Xresources
4032 exec pgrep -x "systemd-inhibit" || \
4033 systemd-inhibit --what=handle-power-key --who=aminb \
4034 --why="Handle power button in sway" sleep infinity
4035 exec mako 2>&1 >/tmp/mako.log
4036 exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4037
4038 include /etc/sway/config.d/*
4039 include ~/.config/sway/`hostname`
4040
4041 exec systemd-notify --ready || true
4042
4043 #+end_src
4044
4045 *** langa
4046 :PROPERTIES:
4047 :header-args+: :tangle ~/.config/sway/langa
4048 :END:
4049
4050 #+begin_src conf
4051 input "2:7:SynPS/2_Synaptics_TouchPad" {
4052 events disabled
4053 dwt enabled
4054 tap enabled
4055 natural_scroll enabled
4056 click_method clickfinger
4057 }
4058
4059 input "1:1:AT_Translated_Set_2_keyboard" {
4060 repeat_delay 200
4061 repeat_rate 45
4062 xkb_layout us_ab,ir
4063 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4064 }
4065 #+end_src
4066
4067 *** shemshak
4068 :PROPERTIES:
4069 :header-args+: :tangle ~/.config/sway/shemshak
4070 :END:
4071
4072 #+begin_src conf
4073 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4074 dwt enabled
4075 tap enabled
4076 natural_scroll enabled
4077 middle_emulation enabled
4078 click_method clickfinger
4079 }
4080
4081 input "1:1:AT_Translated_Set_2_keyboard" {
4082 repeat_delay 200
4083 repeat_rate 45
4084 xkb_layout us,ir
4085 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4086 }
4087 #+end_src
4088 ** swaylock
4089 :PROPERTIES:
4090 :header-args+: :tangle ~/.config/swaylock/config
4091 :END:
4092
4093 #+begin_src conf
4094 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4095 scaling=fill
4096 #+end_src
4097
4098 ** TLP
4099
4100 *** langa
4101
4102 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4103 # ------------------------------------------------------------------------------
4104 # tlp - Parameters for power saving
4105 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4106
4107 # Hint: some features are disabled by default, remove the leading # to enable
4108 # them.
4109
4110 # Set to 0 to disable, 1 to enable TLP.
4111 TLP_ENABLE=1
4112
4113 # Operation mode when no power supply can be detected: AC, BAT.
4114 # Concerns some desktop and embedded hardware only.
4115 TLP_DEFAULT_MODE=AC
4116
4117 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4118 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4119 TLP_PERSISTENT_DEFAULT=0
4120
4121 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4122 # Non-zero value enables, zero disables laptop mode.
4123 DISK_IDLE_SECS_ON_AC=0
4124 DISK_IDLE_SECS_ON_BAT=2
4125
4126 # Dirty page values (timeouts in secs).
4127 MAX_LOST_WORK_SECS_ON_AC=15
4128 MAX_LOST_WORK_SECS_ON_BAT=60
4129
4130 # Hint: CPU parameters below are disabled by default, remove the leading #
4131 # to enable them, otherwise kernel default values are used.
4132
4133 # Select a CPU frequency scaling governor.
4134 # Intel Core i processor with intel_pstate driver:
4135 # powersave(*), performance.
4136 # Older hardware with acpi-cpufreq driver:
4137 # ondemand(*), powersave, performance, conservative, schedutil.
4138 # (*) is recommended.
4139 # Hint: use tlp-stat -p to show the active driver and available governors.
4140 # Important:
4141 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
4142 # efficient for *almost all* workloads and therefore kernel and most
4143 # distributions have chosen them as defaults. If you still want to change,
4144 # you should know what you're doing! You *must* disable your distribution's
4145 # governor settings or conflicts will occur.
4146 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4147 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4148
4149 # Set the min/max frequency available for the scaling governor.
4150 # Possible values strongly depend on your CPU. For available frequencies see
4151 # the output of tlp-stat -p.
4152 #CPU_SCALING_MIN_FREQ_ON_AC=0
4153 #CPU_SCALING_MAX_FREQ_ON_AC=0
4154 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4155 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4156
4157 # Set energy performance hints (HWP) for Intel P-state governor:
4158 # performance, balance_performance, default, balance_power, power
4159 # Values are given in order of increasing power saving.
4160 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4161 CPU_HWP_ON_AC=balance_performance
4162 CPU_HWP_ON_BAT=balance_power
4163
4164 # Set Intel P-state performance: 0..100 (%).
4165 # Limit the max/min P-state to control the power dissipation of the CPU.
4166 # Values are stated as a percentage of the available performance.
4167 # Requires an Intel Core i processor with intel_pstate driver.
4168 #CPU_MIN_PERF_ON_AC=0
4169 #CPU_MAX_PERF_ON_AC=100
4170 #CPU_MIN_PERF_ON_BAT=0
4171 #CPU_MAX_PERF_ON_BAT=30
4172
4173 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4174 # Requires an Intel Core i processor.
4175 # Important:
4176 # - This may conflict with your distribution's governor settings
4177 # - A value of 1 does *not* activate boosting, it just allows it
4178 #CPU_BOOST_ON_AC=1
4179 #CPU_BOOST_ON_BAT=0
4180
4181 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4182 # 0=disable, 1=enable.
4183 SCHED_POWERSAVE_ON_AC=0
4184 SCHED_POWERSAVE_ON_BAT=1
4185
4186 # Kernel NMI Watchdog:
4187 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
4188 NMI_WATCHDOG=0
4189
4190 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4191 # Frequency voltage pairs are written to:
4192 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4193 # CAUTION: only use this, if you thoroughly understand what you are doing!
4194 #PHC_CONTROLS="F:V F:V F:V F:V"
4195
4196 # Set CPU performance versus energy savings policy:
4197 # performance, balance-performance, default, balance-power, power.
4198 # Values are given in order of increasing power saving.
4199 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4200 ENERGY_PERF_POLICY_ON_AC=performance
4201 ENERGY_PERF_POLICY_ON_BAT=balance-power
4202
4203 # Disk devices; separate multiple devices with spaces (default: sda).
4204 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4205 DISK_DEVICES="sda sdb"
4206
4207 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4208 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4209 # Separate values for multiple disks with spaces. Use the special value 'keep'
4210 # to keep the hardware default for the particular disk.
4211 DISK_APM_LEVEL_ON_AC="254 254"
4212 DISK_APM_LEVEL_ON_BAT="128 128"
4213
4214 # Hard disk spin down timeout:
4215 # 0: spin down disabled
4216 # 1..240: timeouts from 5s to 20min (in units of 5s)
4217 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4218 # See 'man hdparm' for details.
4219 # Separate values for multiple disks with spaces. Use the special value 'keep'
4220 # to keep the hardware default for the particular disk.
4221 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4222 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4223
4224 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4225 # Separate values for multiple disks with spaces. Use the special value 'keep'
4226 # to keep the kernel default scheduler for the particular disk.
4227 #DISK_IOSCHED="cfq cfq"
4228
4229 # AHCI link power management (ALPM) for disk devices:
4230 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4231 # (*) Kernel >= 4.15 required, then recommended.
4232 # Multiple values separated with spaces are tried sequentially until success.
4233 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4234 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4235
4236 # Exclude host devices from AHCI link power management.
4237 # Separate multiple hosts with spaces.
4238 #SATA_LINKPWR_BLACKLIST="host1"
4239
4240 # Runtime Power Management for AHCI host and disks devices:
4241 # on=disable, auto=enable.
4242 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4243 #AHCI_RUNTIME_PM_ON_AC=on
4244 #AHCI_RUNTIME_PM_ON_BAT=on
4245
4246 # Seconds of inactivity before disk is suspended.
4247 AHCI_RUNTIME_PM_TIMEOUT=15
4248
4249 # PCI Express Active State Power Management (PCIe ASPM):
4250 # default, performance, powersave.
4251 PCIE_ASPM_ON_AC=performance
4252 PCIE_ASPM_ON_BAT=powersave
4253
4254 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4255 # auto = mid on BAT, high on AC; default = use hardware defaults.
4256 RADEON_POWER_PROFILE_ON_AC=high
4257 RADEON_POWER_PROFILE_ON_BAT=low
4258
4259 # Radeon dynamic power management method (DPM): battery, performance.
4260 RADEON_DPM_STATE_ON_AC=performance
4261 RADEON_DPM_STATE_ON_BAT=battery
4262
4263 # Radeon DPM performance level: auto, low, high; auto is recommended.
4264 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4265 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4266
4267 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4268 WIFI_PWR_ON_AC=off
4269 WIFI_PWR_ON_BAT=on
4270
4271 # Disable wake on LAN: Y/N.
4272 WOL_DISABLE=Y
4273
4274 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4275 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4276 SOUND_POWER_SAVE_ON_AC=0
4277 SOUND_POWER_SAVE_ON_BAT=0
4278
4279 # Disable controller too (HDA only): Y/N.
4280 SOUND_POWER_SAVE_CONTROLLER=N
4281
4282 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4283 # Drive can be powered on again by releasing (and reinserting) the eject lever
4284 # or by pressing the disc eject button on newer models.
4285 # Note: an UltraBay/MediaBay hard disk is never powered off.
4286 BAY_POWEROFF_ON_AC=0
4287 BAY_POWEROFF_ON_BAT=0
4288 # Optical drive device to power off (default sr0).
4289 BAY_DEVICE="sr0"
4290
4291 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4292 RUNTIME_PM_ON_AC=on
4293 RUNTIME_PM_ON_BAT=auto
4294
4295 # Exclude PCI(e) device adresses the following list from Runtime PM
4296 # (separate with spaces). Use lspci to get the adresses (1st column).
4297 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4298
4299 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4300 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4301 # prevents accidential power-on of dGPU in hybrid graphics setups.
4302 # Use "" to disable the feature completely.
4303 # Separate multiple drivers with spaces.
4304 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4305
4306 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4307 USB_AUTOSUSPEND=1
4308
4309 # Exclude listed devices from USB autosuspend (separate with spaces).
4310 # Use lsusb to get the ids.
4311 # Note: input devices (usbhid) are excluded automatically
4312 #USB_BLACKLIST="1111:2222 3333:4444"
4313
4314 # Bluetooth devices are excluded from USB autosuspend:
4315 # 0=do not exclude, 1=exclude.
4316 USB_BLACKLIST_BTUSB=0
4317
4318 # Phone devices are excluded from USB autosuspend:
4319 # 0=do not exclude, 1=exclude (enable charging).
4320 USB_BLACKLIST_PHONE=0
4321
4322 # Printers are excluded from USB autosuspend:
4323 # 0=do not exclude, 1=exclude.
4324 USB_BLACKLIST_PRINTER=1
4325
4326 # WWAN devices are excluded from USB autosuspend:
4327 # 0=do not exclude, 1=exclude.
4328 USB_BLACKLIST_WWAN=1
4329
4330 # Include listed devices into USB autosuspend even if already excluded
4331 # by the blacklists above (separate with spaces).
4332 # Use lsusb to get the ids.
4333 #USB_WHITELIST="1111:2222 3333:4444"
4334
4335 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4336 # (workaround for USB devices that cause shutdown problems).
4337 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4338
4339 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4340 # on system startup: 0=disable, 1=enable.
4341 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4342 # are ignored when this is enabled!
4343 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4344 RESTORE_DEVICE_STATE_ON_STARTUP=0
4345
4346 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4347 # Separate multiple devices with spaces.
4348 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4349 DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
4350
4351 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4352 # Separate multiple devices with spaces.
4353 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4354
4355 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4356 # (workaround for devices that are blocking shutdown).
4357 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4358
4359 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4360 # (to prevent other operating systems from missing radios).
4361 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4362
4363 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4364 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4365
4366 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4367 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4368
4369 # Radio devices to disable on battery when not in use (not connected):
4370 # bluetooth, wifi, wwan.
4371 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4372
4373 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4374 # required). Charging starts when the remaining capacity falls below the
4375 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4376 # Main / Internal battery (values in %)
4377 #START_CHARGE_THRESH_BAT0=75
4378 #STOP_CHARGE_THRESH_BAT0=80
4379 # Ultrabay / Slice / Replaceable battery (values in %)
4380 #START_CHARGE_THRESH_BAT1=75
4381 #STOP_CHARGE_THRESH_BAT1=80
4382
4383 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4384 #RESTORE_THRESHOLDS_ON_BAT=1
4385
4386 # ------------------------------------------------------------------------------
4387 # tlp-rdw - Parameters for the radio device wizard
4388 # Possible devices: bluetooth, wifi, wwan.
4389
4390 # Hints:
4391 # - Parameters are disabled by default, remove the leading # to enable them
4392 # - Separate multiple radio devices with spaces
4393
4394 # Radio devices to disable on connect.
4395 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4396 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4397 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4398
4399 # Radio devices to enable on disconnect.
4400 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4401 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4402 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4403
4404 # Radio devices to enable/disable when docked.
4405 #DEVICES_TO_ENABLE_ON_DOCK=""
4406 #DEVICES_TO_DISABLE_ON_DOCK=""
4407
4408 # Radio devices to enable/disable when undocked.
4409 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4410 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4411 #+end_src
4412
4413 *** shemshak
4414
4415 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
4416 # ------------------------------------------------------------------------------
4417 # tlp - Parameters for power saving
4418 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4419
4420 # Hint: some features are disabled by default, remove the leading # to enable
4421 # them.
4422
4423 # Set to 0 to disable, 1 to enable TLP.
4424 TLP_ENABLE=1
4425
4426 # Operation mode when no power supply can be detected: AC, BAT.
4427 # Concerns some desktop and embedded hardware only.
4428 TLP_DEFAULT_MODE=AC
4429
4430 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4431 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4432 TLP_PERSISTENT_DEFAULT=0
4433
4434 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4435 # Non-zero value enables, zero disables laptop mode.
4436 DISK_IDLE_SECS_ON_AC=0
4437 DISK_IDLE_SECS_ON_BAT=2
4438
4439 # Dirty page values (timeouts in secs).
4440 MAX_LOST_WORK_SECS_ON_AC=15
4441 MAX_LOST_WORK_SECS_ON_BAT=60
4442
4443 # Hint: CPU parameters below are disabled by default, remove the leading #
4444 # to enable them, otherwise kernel default values are used.
4445
4446 # Select a CPU frequency scaling governor.
4447 # Intel Core i processor with intel_pstate driver:
4448 # powersave(*), performance.
4449 # Older hardware with acpi-cpufreq driver:
4450 # ondemand(*), powersave, performance, conservative, schedutil.
4451 # (*) is recommended.
4452 # Hint: use tlp-stat -p to show the active driver and available governors.
4453 # Important:
4454 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
4455 # efficient for *almost all* workloads and therefore kernel and most
4456 # distributions have chosen them as defaults. If you still want to change,
4457 # you should know what you're doing! You *must* disable your distribution's
4458 # governor settings or conflicts will occur.
4459 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4460 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4461
4462 # Set the min/max frequency available for the scaling governor.
4463 # Possible values strongly depend on your CPU. For available frequencies see
4464 # the output of tlp-stat -p.
4465 #CPU_SCALING_MIN_FREQ_ON_AC=0
4466 #CPU_SCALING_MAX_FREQ_ON_AC=0
4467 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4468 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4469
4470 # Set energy performance hints (HWP) for Intel P-state governor:
4471 # performance, balance_performance, default, balance_power, power
4472 # Values are given in order of increasing power saving.
4473 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4474 CPU_HWP_ON_AC=balance_performance
4475 CPU_HWP_ON_BAT=balance_power
4476
4477 # Set Intel P-state performance: 0..100 (%).
4478 # Limit the max/min P-state to control the power dissipation of the CPU.
4479 # Values are stated as a percentage of the available performance.
4480 # Requires an Intel Core i processor with intel_pstate driver.
4481 #CPU_MIN_PERF_ON_AC=0
4482 #CPU_MAX_PERF_ON_AC=100
4483 #CPU_MIN_PERF_ON_BAT=0
4484 #CPU_MAX_PERF_ON_BAT=30
4485
4486 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4487 # Requires an Intel Core i processor.
4488 # Important:
4489 # - This may conflict with your distribution's governor settings
4490 # - A value of 1 does *not* activate boosting, it just allows it
4491 #CPU_BOOST_ON_AC=1
4492 #CPU_BOOST_ON_BAT=0
4493
4494 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4495 # 0=disable, 1=enable.
4496 SCHED_POWERSAVE_ON_AC=0
4497 SCHED_POWERSAVE_ON_BAT=1
4498
4499 # Kernel NMI Watchdog:
4500 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
4501 NMI_WATCHDOG=0
4502
4503 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4504 # Frequency voltage pairs are written to:
4505 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4506 # CAUTION: only use this, if you thoroughly understand what you are doing!
4507 #PHC_CONTROLS="F:V F:V F:V F:V"
4508
4509 # Set CPU performance versus energy savings policy:
4510 # performance, balance-performance, default, balance-power, power.
4511 # Values are given in order of increasing power saving.
4512 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4513 ENERGY_PERF_POLICY_ON_AC=performance
4514 ENERGY_PERF_POLICY_ON_BAT=balance-power
4515
4516 # Disk devices; separate multiple devices with spaces (default: sda).
4517 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4518 DISK_DEVICES="sda sdb"
4519
4520 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4521 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4522 # Separate values for multiple disks with spaces. Use the special value 'keep'
4523 # to keep the hardware default for the particular disk.
4524 DISK_APM_LEVEL_ON_AC="254 254"
4525 DISK_APM_LEVEL_ON_BAT="128 128"
4526
4527 # Hard disk spin down timeout:
4528 # 0: spin down disabled
4529 # 1..240: timeouts from 5s to 20min (in units of 5s)
4530 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4531 # See 'man hdparm' for details.
4532 # Separate values for multiple disks with spaces. Use the special value 'keep'
4533 # to keep the hardware default for the particular disk.
4534 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4535 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4536
4537 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4538 # Separate values for multiple disks with spaces. Use the special value 'keep'
4539 # to keep the kernel default scheduler for the particular disk.
4540 #DISK_IOSCHED="cfq cfq"
4541
4542 # AHCI link power management (ALPM) for disk devices:
4543 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4544 # (*) Kernel >= 4.15 required, then recommended.
4545 # Multiple values separated with spaces are tried sequentially until success.
4546 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4547 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4548
4549 # Exclude host devices from AHCI link power management.
4550 # Separate multiple hosts with spaces.
4551 #SATA_LINKPWR_BLACKLIST="host1"
4552
4553 # Runtime Power Management for AHCI host and disks devices:
4554 # on=disable, auto=enable.
4555 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4556 #AHCI_RUNTIME_PM_ON_AC=on
4557 #AHCI_RUNTIME_PM_ON_BAT=on
4558
4559 # Seconds of inactivity before disk is suspended.
4560 AHCI_RUNTIME_PM_TIMEOUT=15
4561
4562 # PCI Express Active State Power Management (PCIe ASPM):
4563 # default, performance, powersave.
4564 PCIE_ASPM_ON_AC=performance
4565 PCIE_ASPM_ON_BAT=powersave
4566
4567 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4568 # auto = mid on BAT, high on AC; default = use hardware defaults.
4569 RADEON_POWER_PROFILE_ON_AC=high
4570 RADEON_POWER_PROFILE_ON_BAT=low
4571
4572 # Radeon dynamic power management method (DPM): battery, performance.
4573 RADEON_DPM_STATE_ON_AC=performance
4574 RADEON_DPM_STATE_ON_BAT=battery
4575
4576 # Radeon DPM performance level: auto, low, high; auto is recommended.
4577 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4578 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4579
4580 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4581 WIFI_PWR_ON_AC=off
4582 WIFI_PWR_ON_BAT=on
4583
4584 # Disable wake on LAN: Y/N.
4585 WOL_DISABLE=Y
4586
4587 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4588 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4589 SOUND_POWER_SAVE_ON_AC=0
4590 SOUND_POWER_SAVE_ON_BAT=0
4591
4592 # Disable controller too (HDA only): Y/N.
4593 SOUND_POWER_SAVE_CONTROLLER=N
4594
4595 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4596 # Drive can be powered on again by releasing (and reinserting) the eject lever
4597 # or by pressing the disc eject button on newer models.
4598 # Note: an UltraBay/MediaBay hard disk is never powered off.
4599 BAY_POWEROFF_ON_AC=0
4600 BAY_POWEROFF_ON_BAT=0
4601 # Optical drive device to power off (default sr0).
4602 BAY_DEVICE="sr0"
4603
4604 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4605 RUNTIME_PM_ON_AC=on
4606 RUNTIME_PM_ON_BAT=auto
4607
4608 # Exclude PCI(e) device adresses the following list from Runtime PM
4609 # (separate with spaces). Use lspci to get the adresses (1st column).
4610 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4611 RUNTIME_PM_BLACKLIST="01:00.0"
4612
4613 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4614 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4615 # prevents accidential power-on of dGPU in hybrid graphics setups.
4616 # Use "" to disable the feature completely.
4617 # Separate multiple drivers with spaces.
4618 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4619
4620 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4621 USB_AUTOSUSPEND=1
4622
4623 # Exclude listed devices from USB autosuspend (separate with spaces).
4624 # Use lsusb to get the ids.
4625 # Note: input devices (usbhid) are excluded automatically
4626 #USB_BLACKLIST="1111:2222 3333:4444"
4627
4628 # Bluetooth devices are excluded from USB autosuspend:
4629 # 0=do not exclude, 1=exclude.
4630 USB_BLACKLIST_BTUSB=0
4631
4632 # Phone devices are excluded from USB autosuspend:
4633 # 0=do not exclude, 1=exclude (enable charging).
4634 USB_BLACKLIST_PHONE=0
4635
4636 # Printers are excluded from USB autosuspend:
4637 # 0=do not exclude, 1=exclude.
4638 USB_BLACKLIST_PRINTER=1
4639
4640 # WWAN devices are excluded from USB autosuspend:
4641 # 0=do not exclude, 1=exclude.
4642 USB_BLACKLIST_WWAN=1
4643
4644 # Include listed devices into USB autosuspend even if already excluded
4645 # by the blacklists above (separate with spaces).
4646 # Use lsusb to get the ids.
4647 #USB_WHITELIST="1111:2222 3333:4444"
4648
4649 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4650 # (workaround for USB devices that cause shutdown problems).
4651 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4652
4653 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4654 # on system startup: 0=disable, 1=enable.
4655 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4656 # are ignored when this is enabled!
4657 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4658 RESTORE_DEVICE_STATE_ON_STARTUP=1
4659
4660 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4661 # Separate multiple devices with spaces.
4662 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4663
4664 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4665 # Separate multiple devices with spaces.
4666 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4667
4668 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4669 # (workaround for devices that are blocking shutdown).
4670 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4671
4672 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4673 # (to prevent other operating systems from missing radios).
4674 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4675
4676 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4677 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4678
4679 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4680 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4681
4682 # Radio devices to disable on battery when not in use (not connected):
4683 # bluetooth, wifi, wwan.
4684 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4685
4686 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4687 # required). Charging starts when the remaining capacity falls below the
4688 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4689 # Main / Internal battery (values in %)
4690 #START_CHARGE_THRESH_BAT0=75
4691 #STOP_CHARGE_THRESH_BAT0=80
4692 # Ultrabay / Slice / Replaceable battery (values in %)
4693 #START_CHARGE_THRESH_BAT1=75
4694 #STOP_CHARGE_THRESH_BAT1=80
4695
4696 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4697 #RESTORE_THRESHOLDS_ON_BAT=1
4698
4699 # ------------------------------------------------------------------------------
4700 # tlp-rdw - Parameters for the radio device wizard
4701 # Possible devices: bluetooth, wifi, wwan.
4702
4703 # Hints:
4704 # - Parameters are disabled by default, remove the leading # to enable them
4705 # - Separate multiple radio devices with spaces
4706
4707 # Radio devices to disable on connect.
4708 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4709 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4710 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4711
4712 # Radio devices to enable on disconnect.
4713 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4714 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4715 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4716
4717 # Radio devices to enable/disable when docked.
4718 #DEVICES_TO_ENABLE_ON_DOCK=""
4719 #DEVICES_TO_DISABLE_ON_DOCK=""
4720
4721 # Radio devices to enable/disable when undocked.
4722 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4723 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4724 #+end_src
4725
4726 ** X
4727
4728 *** xprofile
4729 :PROPERTIES:
4730 :header-args+: :tangle ~/.xprofile
4731 :END:
4732
4733 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4734 contrary, it's automatically sourced by LightDM, my display manager of
4735 choice.
4736
4737 #+begin_src sh :tangle no
4738 xset -b # disable bell
4739 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4740
4741 # setxkbmap -option compose:ralt
4742
4743 setxkbmap -option ctrl:nocaps # turn capslock into control
4744 setxkbmap -option altwin:swap_alt_win # swap alt and super
4745
4746 if [ $(hostname) = "plasma" ]
4747 then
4748 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4749 fi
4750
4751 if [ $(hostname) = "enigma" ]
4752 then
4753 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4754 fi
4755
4756 light -Scrs "intel_backlight" 2
4757
4758 source $HOME/.zprofile
4759
4760 export _JAVA_AWT_WM_NONREPARENTING=1
4761 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4762
4763 if [ $(hostname) = "plasma" ]
4764 then
4765 unlock-def-gk.py &
4766 fi
4767
4768 bspwm &
4769 #+end_src
4770
4771 *** X resources
4772
4773 **** Xresources
4774 :PROPERTIES:
4775 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4776 :END:
4777
4778 #+begin_src conf-xdefaults
4779 #include ".Xresources.d/fonts"
4780 ! #include ".Xresources.d/colors"
4781 #include ".Xresources.d/emacs"
4782 #include ".Xresources.d/rxvt-unicode"
4783 #+end_src
4784
4785 **** Xresources.d
4786
4787 ***** fonts
4788 :PROPERTIES:
4789 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4790 :END:
4791
4792 #+begin_src conf-xdefaults
4793 Xft.lcdfilter: lcddefault
4794 Xft.antialias: true
4795 Xft.autohint: 0
4796 Xft.hinting: true
4797 Xft.hintstyle: hintslight
4798 ! Xft.hintstyle: hintfull
4799 Xft.rgba: rgb
4800 Xft.dpi: 96
4801 #+end_src
4802
4803 ***** colors
4804 :PROPERTIES:
4805 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4806 :END:
4807
4808 #+begin_src conf-xdefaults :tangle no
4809 #include "gruvbox-light.xresources"
4810 ! #include "gruvbox-dark.xresources"
4811 #include "gruvbox-urxvt256.xresources"
4812 #+end_src
4813
4814 #+begin_src conf-xdefaults :tangle no
4815 ! -----------------------------------------------------------------------------
4816 ! File: gruvbox-light.xresources
4817 ! Description: Retro groove colorscheme generalized
4818 ! Author: morhetz <morhetz@gmail.com>
4819 ! Source: https://github.com/morhetz/gruvbox-generalized
4820 ! Last Modified: 6 Sep 2014
4821 ! -----------------------------------------------------------------------------
4822
4823 ! hard contrast: *background: #f9f5d7
4824 *background: #fbf1c7
4825 ! soft contrast: *background: #f2e5bc
4826 *foreground: #3c3836
4827 ! Black + DarkGrey
4828 *color0: #fdf4c1
4829 *color8: #928374
4830 ! DarkRed + Red
4831 *color1: #cc241d
4832 *color9: #9d0006
4833 ! DarkGreen + Green
4834 *color2: #98971a
4835 *color10: #79740e
4836 ! DarkYellow + Yellow
4837 *color3: #d79921
4838 *color11: #b57614
4839 ! DarkBlue + Blue
4840 *color4: #458588
4841 *color12: #076678
4842 ! DarkMagenta + Magenta
4843 *color5: #b16286
4844 *color13: #8f3f71
4845 ! DarkCyan + Cyan
4846 *color6: #689d6a
4847 *color14: #427b58
4848 ! LightGrey + White
4849 *color7: #7c6f64
4850 *color15: #3c3836
4851 #+end_src
4852
4853 #+begin_src conf-xdefaults :tangle no
4854 ! -----------------------------------------------------------------------------
4855 ! File: gruvbox-dark.xresources
4856 ! Description: Retro groove colorscheme generalized
4857 ! Author: morhetz <morhetz@gmail.com>
4858 ! Source: https://github.com/morhetz/gruvbox-generalized
4859 ! Last Modified: 6 Sep 2014
4860 ! -----------------------------------------------------------------------------
4861
4862 ! hard contrast: *background: #1d2021
4863 *background: #282828
4864 ! soft contrast: *background: #32302f
4865 *foreground: #ebdbb2
4866 ! Black + DarkGrey
4867 *color0: #282828
4868 *color8: #928374
4869 ! DarkRed + Red
4870 *color1: #cc241d
4871 *color9: #fb4934
4872 ! DarkGreen + Green
4873 *color2: #98971a
4874 *color10: #b8bb26
4875 ! DarkYellow + Yellow
4876 *color3: #d79921
4877 *color11: #fabd2f
4878 ! DarkBlue + Blue
4879 *color4: #458588
4880 *color12: #83a598
4881 ! DarkMagenta + Magenta
4882 *color5: #b16286
4883 *color13: #d3869b
4884 ! DarkCyan + Cyan
4885 *color6: #689d6a
4886 *color14: #8ec07c
4887 ! LightGrey + White
4888 *color7: #a89984
4889 *color15: #ebdbb2
4890 #+end_src
4891
4892 #+begin_src conf-xdefaults :tangle no
4893 ! -----------------------------------------------------------------------------
4894 ! File: gruvbox-urxvt256.xresources
4895 ! Description: Retro groove colorscheme generalized
4896 ! Author: morhetz <morhetz@gmail.com>
4897 ! Source: https://github.com/morhetz/gruvbox-generalized
4898 ! Last Modified: 13 Dec 2013
4899 ! -----------------------------------------------------------------------------
4900
4901 URxvt.color24: #076678
4902 URxvt.color66: #427b58
4903 URxvt.color88: #9d0006
4904 URxvt.color96: #8f3f71
4905 URxvt.color100: #79740e
4906 URxvt.color108: #8ec07c
4907 URxvt.color109: #83a598
4908 URxvt.color130: #af3a03
4909 URxvt.color136: #b57614
4910 URxvt.color142: #b8bb26
4911 URxvt.color167: #fb4934
4912 URxvt.color175: #d3869b
4913 URxvt.color208: #fe8019
4914 URxvt.color214: #fabd2f
4915 URxvt.color223: #ebdbb2
4916 URxvt.color228: #f2e5bc
4917 URxvt.color229: #fbf1c7
4918 URxvt.color230: #f9f5d7
4919 URxvt.color234: #1d2021
4920 URxvt.color235: #282828
4921 URxvt.color236: #32302f
4922 URxvt.color237: #3c3836
4923 URxvt.color239: #504945
4924 URxvt.color241: #665c54
4925 URxvt.color243: #7c6f64
4926 URxvt.color244: #928374
4927 URxvt.color245: #928374
4928 URxvt.color246: #a89984
4929 URxvt.color248: #bdae93
4930 URxvt.color250: #d5c4a1
4931 #+end_src
4932
4933 ***** emacs
4934 :PROPERTIES:
4935 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4936 :END:
4937
4938 #+begin_src conf-xdefaults
4939 Emacs.menuBar: off
4940 Emacs.toolBar: off
4941 Emacs.verticalScrollBars: off
4942 Emacs.cursorBlink: off
4943 Emacs.FontBackend: xft,x
4944 ! Emacs.font: Ubuntu Mono-12
4945 ! Emacs.font: Triplicate T4C-11
4946 ! Emacs.font: Ubuntu Mono-10.5
4947 ! Emacs.font: Ubuntu Mono-12
4948 ! Emacs.font: Iosevka-11
4949
4950 ! Emacs.font: Fira Mono:size=15
4951 ! Emacs.font: DejaVu Sans Mono:size=15
4952 ! Emacs.font: Inconsolata:size=17
4953 ! Emacs.font: Inconsolata:size=16
4954 ! Emacs.font: Inconsolata LGC:size=14
4955 ! Emacs.font: Source Code Pro Medium-10.5
4956 Emacs.font: Source Code Pro:size=14
4957 ! Emacs.font: Ubuntu Mono:size=16
4958 ! Emacs.font: Iosevka:size=16
4959 #+end_src
4960
4961 ***** rxvt-unicode
4962 :PROPERTIES:
4963 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4964 :END:
4965
4966 #+begin_src conf-xdefaults
4967 ! Font
4968 URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4969 URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4970 URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4971 URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4972
4973 URxvt.xftAntialias: true
4974 URxvt.letterSpace: 0
4975
4976 URxvt.depth: 0
4977 URxvt.loginShell: true
4978 URxvt.saveLines: 100000
4979 URxvt.internalBorder: 3
4980 URxvt.lineSpace: 0
4981 URxvt.scrollBar: false
4982 URxvt.scrollStyle: rxvt
4983 URxvt*scrollTtyOutput: false
4984 URxvt*scrollWithBuffer: true
4985 URxvt*scrollTtyKeypress: true
4986 URxvt.keysym.Shift-Up: command:\033]720;1\007
4987 URxvt.keysym.Shift-Down: command:\033]721;1\007
4988
4989 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4990 URxvt.url-select.launcher: firefox
4991 URxvt.url-select.underline: true
4992 URxvt.keysym.M-u: perl:url-select:select_next
4993 URxvt.keysym.M-Escape: perl:keyboard-select:activate
4994 URxvt.keysym.M-s: perl:keyboard-select:search
4995 URxvt.url-launcher: /usr/bin/firefox
4996 URxvt.matcher.button: 1
4997 URxvt.iso14755: false
4998 URxvt.iso14755_53: false
4999 URxvt.keysym.M-c: perl:clipboard:copy
5000 URxvt.keysym.M-v: perl:clipboard:paste
5001 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
5002 URxvt.keysym.C-Up: font-size:increase
5003 URxvt.keysym.C-Down: font-size:decrease
5004 URxvt.keysym.C-S-Up: font-size:incglobal
5005 URxvt.keysym.C-S-Down: font-size:decglobal
5006 URxvt.keysym.C-equal: font-size:reset
5007 !URxvt.keysym.C-question: font-size:show
5008
5009 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5010
5011 !urxvt*foreground: white
5012 !urxvt*background: black
5013
5014 !*color0: #2E3436
5015 !*color1: #a40000
5016 !*color2: #4E9A06
5017 !*color3: #C4A000
5018 !*color4: #3465A4
5019 !*color5: #75507B
5020 !*color6: #ce5c00
5021 !*color7: #babdb9
5022 !*color8: #555753
5023 !*color9: #EF2929
5024 !*color10: #8AE234
5025 !*color11: #FCE94F
5026 !*color12: #729FCF
5027 !*color13: #AD7FA8
5028 !*color14: #fcaf3e
5029 !*color15: #EEEEEC
5030
5031 !URxvt.foreground: #C8C8C8
5032 !URxvt.background: #FFFFFF
5033
5034 !! black
5035 !*color0: #2E3436
5036 !*color8: #555753
5037 !! red
5038 !*color1: #a40000
5039 !*color9: #EF2929
5040 !! green
5041 !*color2: #4E9A06
5042 !*color10: #8AE234
5043 !! yellow
5044 !*color3: #C4A000
5045 !*color11: #FCE94F
5046 !! blue
5047 !*color4: #3465A4
5048 !*color12: #729FCF
5049 !! purple
5050 !*color5: #75507B
5051 !*color13: #AD7FA8
5052 !! orange (replaces cyan)
5053 !*color6: #ce5c00
5054 !*color14: #fcaf3e
5055 !! white
5056 !*color7: #babdb9
5057 !*color15: #EEEEEC
5058
5059 ! Tango colour theme for rxvt-unicode
5060 URxvt.background: #FFFFFF
5061 URxvt.foreground: #000000
5062
5063 ! Black
5064 URxvt.color0: #2E3436
5065 URxvt.color8: #757773
5066
5067 ! Red
5068 URxvt.color1: #CC0000
5069 URxvt.color9: #EF2929
5070
5071 ! Green
5072 URxvt.color2: #4E9A06
5073 URxvt.color10: #8AE234
5074
5075 ! Yellow
5076 URxvt.color3: #C4A000
5077 URxvt.color11: #FCE94F
5078
5079 ! Blue
5080 URxvt.color4: #3465A4
5081 URxvt.color12: #729FCF
5082
5083 ! Magenta
5084 URxvt.color5: #75507B
5085 URxvt.color13: #AD7FA8
5086
5087 !! Cyan
5088 !URxvt.color6: #06989A
5089 !URxvt.color14: #34E2E2
5090 ! orange (replaces cyan)
5091 ,*color6: #ce5c00
5092 ,*color14: #fcaf3e
5093
5094 ! White
5095 URxvt.color7: #D3D7CF
5096 URxvt.color15: #EEEEEC
5097 #+end_src
5098
5099 *** xkb us_ab keyboard layout
5100
5101 #+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5102 default partial alphanumeric_keys
5103 xkb_symbols "us_ab" {
5104 include "us(basic)"
5105 name[Group1]= "English (US)(aminb)";
5106
5107 key <MENU> { [ Alt_R ] };
5108 };
5109 #+end_src
5110
5111 ** XDG
5112 :PROPERTIES:
5113 :header-args+: :tangle ~/.config/user-dirs.dirs
5114 :END:
5115
5116 #+begin_src conf
5117 XDG_DESKTOP_DIR="$HOME/Desktop"
5118 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5119 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5120 XDG_MUSIC_DIR="$HOME/usr/music"
5121 XDG_PICTURES_DIR="$HOME/usr/pics"
5122 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5123 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5124 XDG_VIDEOS_DIR="$HOME/usr/vids"
5125 #+end_src
5126
5127 ** Zathura
5128 :PROPERTIES:
5129 :header-args+: :tangle ~/.config/zathura/zathurarc
5130 :END:
5131
5132 #+begin_src conf
5133 set smooth-scroll true
5134 set selection-clipboard clipboard
5135 set zoom-step 05
5136 set default-bg "#272727"
5137 set statusbar-bg "#272727"
5138 set inputbar-bg "#373737"
5139 #+end_src
5140
5141 ** Zsh
5142
5143 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5144 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5145 installed.
5146
5147 *** zimrc
5148 :PROPERTIES:
5149 :header-args+: :tangle ~/.zimrc
5150 :END:
5151
5152 #+begin_src sh
5153
5154
5155 #################
5156 # CORE SETTINGS #
5157 #################
5158
5159 #
5160 # Zim settings
5161 #
5162
5163 # Select what modules you would like enabled.
5164 # The second line of modules may depend on options set by modules in the first
5165 # line. These dependencies are noted on the respective module's README.md.
5166 zmodules=(directory environment git git-info history input ssh utility custom \
5167 syntax-highlighting history-substring-search prompt completion)
5168
5169
5170 ###################
5171 # MODULE SETTINGS #
5172 ###################
5173
5174 #
5175 # Prompt
5176 #
5177
5178 # Set your desired prompt here
5179 zprompt_theme='pure'
5180 #PURE_PROMPT_SYMBOL=λ
5181 #PURE_PROMPT_SYMBOL=δ
5182 PURE_PROMPT_SYMBOL=➜
5183
5184 #
5185 # Completion
5186 #
5187
5188 # set an optional host-specific filename for the completion cache file
5189 # if none is provided, the default '.zcompdump' is used.
5190 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5191
5192 #
5193 # Utility
5194 #
5195
5196 # Uncomment to enable command correction prompts
5197 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5198 setopt CORRECT
5199
5200 #
5201 # Environment
5202 #
5203
5204 # Set the string below to the desired terminal title format string.
5205 # The terminal title is redrawn upon directory change, however, variables like
5206 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5207 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5208 # The example below uses the following format: 'username@host:/current/directory'
5209 ztermtitle='%n@%m:%~'
5210
5211 #
5212 # Input
5213 #
5214
5215 # Uncomment to enable double-dot expansion.
5216 # This appends '../' to your input for each '.' you type after an initial '..'
5217 #zdouble_dot_expand='true'
5218
5219 #
5220 # Syntax-Highlighting
5221 #
5222
5223 # This determines what highlighters will be used with the syntax-highlighting module.
5224 # Documentation of the highlighters can be found here:
5225 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5226 # For (u)rxvt, termite and gnome-terminal users,
5227 # removing the 'cursor' highlighter will fix the disappearing cursor problem
5228 #zhighlighters=(main brackets cursor)
5229 zhighlighters=(main brackets pattern)
5230
5231
5232 #
5233 # SSH
5234 #
5235
5236 # Load these ssh identities with the ssh module
5237 zssh_ids=(id_ed25519_bandali)
5238
5239
5240 #
5241 # Pacman
5242 #
5243
5244 # Set (optional) pacman front-end.
5245 zpacman_frontend='yay'
5246
5247 # Load any helper scripts as defined here
5248 #zpacman_helper=(aur)
5249 #+end_src
5250
5251 *** zlogin
5252 :PROPERTIES:
5253 :header-args+: :tangle ~/.zlogin
5254 :END:
5255
5256 #+begin_src sh
5257
5258
5259 #
5260 # User configuration sourced by login shells
5261 #
5262
5263 # Initialize zim
5264 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5265 #+end_src
5266
5267 *** zprofile
5268 :PROPERTIES:
5269 :header-args+: :tangle ~/.zprofile
5270 :END:
5271
5272 #+begin_src sh
5273 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5274 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
5275 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
5276 export XDG_CONFIG_HOME=$HOME/.config
5277 export XDG_DATA_HOME=$HOME/.local/share
5278 export XDG_DATA_DIRS=/usr/local/share:/usr/share
5279 export MAILDIR="$HOME/mail"
5280 export CVS_RSH=ssh
5281 #export MATHMODELS=$HOME/src/eiffel/mathmodels
5282 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5283 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5284
5285 # Eiffel2Java stuff
5286 #export JAVA_HOME=/usr/lib/jvm/default
5287 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5288 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5289 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5290
5291 #export PATH="$HOME/usr/build/pvs:$PATH"
5292 #export SBCLISP_HOME=/usr/share/sbcl-source
5293 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5294
5295 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
5296
5297 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5298 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5299
5300 export NIXPKGS=$HOME/src/git/nixpkgs
5301
5302 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
5303 #+end_src
5304
5305 *** zshenv
5306 :PROPERTIES:
5307 :header-args+: :tangle ~/.zshenv
5308 :END:
5309
5310 #+begin_src sh
5311 # Ensure that a non-login, non-interactive shell has a defined environment.
5312 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5313 source "${ZDOTDIR:-$HOME}/.zprofile"
5314 fi
5315 #+end_src
5316
5317 *** zshrc
5318 :PROPERTIES:
5319 :header-args+: :tangle ~/.zshrc
5320 :END:
5321
5322 #+begin_src sh
5323 # Bash-like navigation
5324 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5325 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5326 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5327 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
5328
5329 #disable -r time # disable shell reserved word
5330 #alias time='time -p' # -p for POSIX output
5331
5332 # rehash if last command was pacaur or pacman
5333 # (so that zsh picks up changes in $PATH immediately)
5334 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5335
5336 #
5337 # User configuration sourced by interactive shells
5338 #
5339
5340 # Change default zim location
5341 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5342
5343 # Start zim
5344 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5345
5346 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5347 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5348
5349 setopt globdots
5350
5351 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
5352 # source ~/.zsh/zsh-autopair/autopair.zsh
5353
5354
5355 ### fzf ###
5356
5357 source /usr/share/fzf/key-bindings.zsh
5358 source /usr/share/fzf/completion.zsh
5359
5360 # Accept history selection instead of putting it on
5361 # the command line
5362 fzf-history-widget-accept() {
5363 fzf-history-widget
5364 zle accept-line
5365 }
5366 #zle -N fzf-history-widget-accept
5367 #bindkey '^R' fzf-history-widget-accept
5368
5369 # alt+c preview
5370 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5371
5372 ### fzf ###
5373
5374
5375 # aliases
5376 alias mpv="mpv --ytdl-format mp4"
5377 alias mv="mv -iv"
5378 alias cp="cp -iv"
5379 alias scl=systemctl
5380 alias jcl=journalctl
5381 alias m="mbsync -a; getmail; notmuch new"
5382 alias best="youtube-dl -f best"
5383 alias nixx="ssh amin@nix.aminb.org"
5384 alias fence="ssh aminb@fencepost.gnu.org"
5385
5386 aur() {
5387 cd ~/usr/build
5388 git clone https://aur.archlinux.org/${1}.git
5389 cd ${1}
5390 }
5391
5392 # i-beam cursor
5393 echo -e "\033[5 q"
5394 #echo -e "\033[6 q"
5395 #+end_src
5396
5397 * Scripts
5398
5399 This section contains various useful scripts and the ones used by the
5400 programs above. For instance, =toggle-tablet= for switching to and
5401 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5402 Xfce's presentation mode which keeps the screen awake, and
5403 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5404 exact brightness value.
5405
5406 ** battery-percentage-time
5407 :PROPERTIES:
5408 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
5409 :END:
5410
5411 #+begin_src sh :tangle no
5412 dbus_send() {
5413 label=$1
5414 dbus-send --print-reply=literal --system \
5415 --dest=org.freedesktop.UPower \
5416 /org/freedesktop/UPower/devices/battery_BAT0 \
5417 org.freedesktop.DBus.Properties.Get \
5418 string:org.freedesktop.UPower.Device \
5419 string:"${label}" | awk '{print $3}'
5420 }
5421
5422 perc=$(dbus_send 'Percentage')
5423 state=$(dbus_send 'State')
5424
5425 if [ "$state" -eq 2 ]; then # Discharging
5426 secs=$(dbus_send 'TimeToEmpty')
5427 elif [ "$state" -eq 1 ]; then # Charging
5428 secs=$(dbus_send 'TimeToFull')
5429 fi
5430
5431 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5432 #+end_src
5433
5434 ** rofi-light
5435 :PROPERTIES:
5436 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5437 :END:
5438
5439 #+begin_src bash
5440 cur=$(light -G)
5441 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
5442 light -S $val
5443 #+end_src
5444
5445 ** s (run sway)
5446 :PROPERTIES:
5447 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5448 :END:
5449
5450 #+begin_src bash
5451 export _JAVA_AWT_WM_NONREPARENTING=1
5452 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5453 light -Nr 2
5454 source $HOME/.zprofile
5455 sway
5456 #+end_src
5457
5458 ** sway-ws-util
5459 :PROPERTIES:
5460 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5461 :END:
5462
5463 #+begin_src bash
5464 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5465 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5466 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5467 dest_ws=-1
5468 op=-1
5469
5470 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5471 op="$1"
5472 if [ "$2" = "prev" ]; then
5473 dest_ws="$prev_ws"
5474 elif [ "$2" = "next" ]; then
5475 dest_ws="$next_ws"
5476 else
5477 echo "Usage: $0 $1 {prev|next} [follow]"
5478 exit 1
5479 fi
5480 else
5481 echo "Usage: $0 {switch|move} {prev|next} [follow]"
5482 exit 1
5483 fi
5484
5485 if [ "$op" = "switch" ]; then
5486 sway workspace "$dest_ws"
5487 elif [ "$op" = "move" ]; then
5488 sway move container to workspace "$dest_ws"
5489 if [ "$3" = "follow" ]; then
5490 sway workspace "$dest_ws"
5491 fi
5492 fi
5493 #+end_src
5494
5495 ** toggle-layout
5496 :PROPERTIES:
5497 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5498 :END:
5499
5500 #+begin_src bash :tangle no
5501 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5502
5503 if [ "$lang" = "us" ]; then
5504 setxkbmap ir
5505 else
5506 setxkbmap us
5507 # xmodmap $HOME/.Xmodmap
5508 fi
5509 #+end_src
5510
5511 ** toggle-presentation-mode
5512 :PROPERTIES:
5513 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5514 :END:
5515
5516 #+begin_src bash :tangle no
5517 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5518 #+end_src
5519
5520 ** toggle-tablet
5521 :PROPERTIES:
5522 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5523 :END:
5524
5525 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5526 a few things:
5527
5528 - rotates the screen using =xrandr=, so that rotating the physical
5529 display of my X220t would have the laptop's battery on the right
5530 hand side,
5531 - enables touch screen,
5532 - properly rotates the stylus pen and touch screen pointers, and
5533 - toggles between RGB and Vertical BGR sub-pixel order.
5534
5535 #+begin_src bash :tangle no
5536 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5537 0) # Screen is not rotated, we should rotate it right (90°)
5538 xrandr -o 3
5539 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5540 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5541 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5542 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5543 ;;
5544 1) # Currently top is rotated right, we should set it normal (0°)
5545 xrandr -o 0
5546 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5547 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5548 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5549 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5550 ;;
5551 *)
5552 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5553 exit 1
5554 ;;
5555 esac
5556 #+end_src
5557
5558 ** unlock-def-gk.py
5559 :PROPERTIES:
5560 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5561 :END:
5562
5563 #+begin_src python :tangle no
5564 import gnomekeyring as gk
5565 # list_item_ids_sync('login')[0] == 1L
5566 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5567 #+end_src
5568
5569 ** volume-info
5570 :PROPERTIES:
5571 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5572 :END:
5573
5574 #+begin_src sh :tangle no
5575 cur_vol=$(pamixer --get-volume)
5576
5577 if [ $(pamixer --get-mute) = true ]; then
5578 printf 'mt \n' "$cur_vol"
5579 else
5580 printf '%02d \n' "$cur_vol"
5581 fi
5582 #+end_src
5583
5584 ** wp
5585
5586 My little wallpaper changer script.
5587
5588 *** wp
5589 :PROPERTIES:
5590 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5591 :END:
5592
5593 #+begin_src bash :tangle no
5594 export DISPLAY=:0
5595
5596 case "$1" in
5597 "day")
5598 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5599 ;;
5600 "night")
5601 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5602 ;;
5603 *)
5604 echo $"Usage: $0 {day|night}"
5605 exit 1
5606 esac
5607 #+end_src
5608
5609 *** wp-auto
5610 :PROPERTIES:
5611 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5612 :END:
5613
5614 #+begin_src bash :tangle no
5615 SED=$(which sed)
5616 ROFI=$(which rofi)
5617
5618 export DISPLAY=:0
5619 HOUR=$(date +%H)
5620
5621 if [ -z "${SED}" ]
5622 then
5623 echo "Did not find 'sed', script cannot continue."
5624 exit 1
5625 fi
5626 if [ -z "${ROFI}" ]
5627 then
5628 echo "Did not find rofi, there is no point to continue."
5629 exit 1
5630 fi
5631
5632 ###
5633 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5634 # Repeated calls should leave the config clean-ish
5635 ###
5636 function set_theme()
5637 {
5638 CDIR="${HOME}/.config/rofi/"
5639 if [ ! -d "${CDIR}" ]
5640 then
5641 mkdir -p ${CDIR}
5642 fi
5643 if [ -f "${CDIR}/config" ]
5644 then
5645 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5646 fi
5647 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5648
5649 }
5650
5651 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5652 then
5653 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5654 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5655 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5656 else
5657 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5658 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5659 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5660 fi
5661 #+end_src
5662
5663 *** wp.service
5664 :PROPERTIES:
5665 :header-args+: :tangle ~/.config/systemd/user/wp.service
5666 :END:
5667
5668 #+begin_src conf :tangle no
5669 [Unit]
5670 Description=wallpaper service
5671
5672 [Service]
5673 Type=oneshot
5674 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5675 #+end_src
5676
5677 *** wp.timer
5678 :PROPERTIES:
5679 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5680 :END:
5681
5682 #+begin_src conf :tangle no
5683 [Unit]
5684 [Unit]
5685 Description=wallpaper timer
5686
5687 [Timer]
5688 OnCalendar=07,21:00
5689 Unit=wp.service
5690 Persistent=true
5691
5692 [Install]
5693 WantedBy=timers.target
5694 #+end_src
5695
5696 ** zathura-sync.sh
5697 :PROPERTIES:
5698 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5699 :END:
5700
5701 #+begin_src sh
5702 pos="$1"
5703 pdffile="$2"
5704 zathura --synctex-forward "$pos" "$pdffile" || \
5705 (
5706 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5707 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5708 #+end_src
5709 ** Fun :)
5710
5711 *** eat-em
5712 :PROPERTIES:
5713 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5714 :END:
5715
5716 #+begin_src sh
5717 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5718 # [ESC] character in original post removed here.
5719
5720 # ANSI Color -- use these variables to easily have different color
5721 # and format output. Make sure to output the reset sequence after
5722 # colors (f = foreground, b = background), and use the 'off'
5723 # feature for anything you turn on.
5724
5725 initializeANSI()
5726 {
5727 esc="$(echo -en '\e')"
5728
5729 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5730 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5731 cyanf="${esc}[36m"; whitef="${esc}[37m"
5732
5733 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5734 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5735 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5736
5737 boldon="${esc}[1m"; boldoff="${esc}[22m"
5738 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5739 ulon="${esc}[4m"; uloff="${esc}[24m"
5740 invon="${esc}[7m"; invoff="${esc}[27m"
5741
5742 reset="${esc}[0m"
5743 }
5744
5745 # note in this first use that switching colors doesn't require a reset
5746 # first - the new color overrides the old one.
5747
5748 #clear
5749
5750 initializeANSI
5751
5752 cat << EOF
5753
5754 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5755 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5756 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5757 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5758 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5759 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5760
5761 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5762 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5763 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5764 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5765 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5766 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5767
5768 EOF
5769 #+end_src
5770
5771 *** invade-em
5772 :PROPERTIES:
5773 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5774 :END:
5775
5776 #+begin_src bash
5777 #
5778 # ANSI color scheme script featuring Space Invaders
5779 #
5780 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5781 # Modified by lolilolicon
5782 #
5783
5784 f=3 b=4
5785 for j in f b; do
5786 for i in {0..7}; do
5787 printf -v $j$i %b "\e[${!j}${i}m"
5788 done
5789 done
5790 bld=$'\e[1m'
5791 rst=$'\e[0m'
5792
5793 cat << EOF
5794
5795 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5796 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5797 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5798 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5799
5800 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5801 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5802 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5803 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5804
5805
5806 $f7▌$rst
5807
5808 $f7▌$rst
5809
5810 $f7 ▄█▄ $rst
5811 $f7▄█████████▄$rst
5812 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5813
5814 EOF
5815 #+end_src