+** mpd
+:PROPERTIES:
+:header-args+: :tangle ~/.config/mpd/mpd.conf
+:END:
+
+#+begin_src conf
+# An example configuration file for MPD.
+# Read the user manual for documentation: http://www.musicpd.org/doc/user/
+
+
+# Files and directories #######################################################
+#
+# This setting controls the top directory which MPD will search to discover the
+# available audio files and add them to the daemon's online database. This
+# setting defaults to the XDG directory, otherwise the music directory will be
+# be disabled and audio files will only be accepted over ipc socket (using
+# file:// protocol) or streaming files over an accepted protocol.
+#
+music_directory "~/usr/music"
+#
+# This setting sets the MPD internal playlist directory. The purpose of this
+# directory is storage for playlists created by MPD. The server will use
+# playlist files not created by the server but only if they are in the MPD
+# format. This setting defaults to playlist saving being disabled.
+#
+playlist_directory "~/.mpd/playlists"
+#
+# This setting sets the location of the MPD database. This file is used to
+# load the database at server start up and store the database while the
+# server is not up. This setting defaults to disabled which will allow
+# MPD to accept files over ipc socket (using file:// protocol) or streaming
+# files over an accepted protocol.
+#
+db_file "~/.mpd/database"
+#
+# These settings are the locations for the daemon log files for the daemon.
+# These logs are great for troubleshooting, depending on your log_level
+# settings.
+#
+# The special value "syslog" makes MPD use the local syslog daemon. This
+# setting defaults to logging to syslog, otherwise logging is disabled.
+#
+log_file "~/.mpd/log"
+#
+# This setting sets the location of the file which stores the process ID
+# for use of mpd --kill and some init scripts. This setting is disabled by
+# default and the pid file will not be stored.
+#
+pid_file "~/.mpd/pid"
+#
+# This setting sets the location of the file which contains information about
+# most variables to get MPD back into the same general shape it was in before
+# it was brought down. This setting is disabled by default and the server
+# state will be reset on server start up.
+#
+state_file "~/.mpd/state"
+#
+# The location of the sticker database. This is a database which
+# manages dynamic information attached to songs.
+#
+sticker_file "~/.mpd/sticker.sql"
+#
+###############################################################################
+
+
+# General music daemon options ################################################
+#
+# This setting specifies the user that MPD will run as. MPD should never run as
+# root and you may use this setting to make MPD change its user ID after
+# initialization. This setting is disabled by default and MPD is run as the
+# current user.
+#
+#user "nobody"
+#
+# This setting specifies the group that MPD will run as. If not specified
+# primary group of user specified with "user" setting will be used (if set).
+# This is useful if MPD needs to be a member of group such as "audio" to
+# have permission to use sound card.
+#
+#group "nogroup"
+#
+# This setting sets the address for the daemon to listen on. Careful attention
+# should be paid if this is assigned to anything other then the default, any.
+# This setting can deny access to control of the daemon. Not effective if
+# systemd socket activiation is in use.
+#
+# For network
+#bind_to_address "any"
+#
+# And for Unix Socket
+#bind_to_address "~/.mpd/socket"
+#
+# This setting is the TCP port that is desired for the daemon to get assigned
+# to.
+#
+#port "6600"
+#
+# This setting controls the type of information which is logged. Available
+# setting arguments are "default", "secure" or "verbose". The "verbose" setting
+# argument is recommended for troubleshooting, though can quickly stretch
+# available resources on limited hardware storage.
+#
+#log_level "default"
+#
+# If you have a problem with your MP3s ending abruptly it is recommended that
+# you set this argument to "no" to attempt to fix the problem. If this solves
+# the problem, it is highly recommended to fix the MP3 files with vbrfix
+# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
+# point gapless MP3 playback can be enabled.
+#
+#gapless_mp3_playback "yes"
+#
+# Setting "restore_paused" to "yes" puts MPD into pause mode instead
+# of starting playback after startup.
+#
+#restore_paused "no"
+#
+# This setting enables MPD to create playlists in a format usable by other
+# music players.
+#
+#save_absolute_paths_in_playlists "no"
+#
+# This setting defines a list of tag types that will be extracted during the
+# audio file discovery process. The complete list of possible values can be
+# found in the user manual.
+#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+# This setting enables automatic update of MPD's database when files in
+# music_directory are changed.
+#
+#auto_update "yes"
+#
+# Limit the depth of the directories being watched, 0 means only watch
+# the music directory itself. There is no limit by default.
+#
+#auto_update_depth "3"
+#
+###############################################################################
+
+
+# Symbolic link behavior ######################################################
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links outside of the configured music_directory.
+#
+#follow_outside_symlinks "yes"
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links inside of the configured music_directory.
+#
+#follow_inside_symlinks "yes"
+#
+###############################################################################
+
+
+# Zeroconf / Avahi Service Discovery ##########################################
+#
+# If this setting is set to "yes", service information will be published with
+# Zeroconf / Avahi.
+#
+#zeroconf_enabled "yes"
+#
+# The argument to this setting will be the Zeroconf / Avahi unique name for
+# this MPD server on the network.
+#
+#zeroconf_name "Music Player"
+#
+###############################################################################
+
+
+# Permissions #################################################################
+#
+# If this setting is set, MPD will require password authorization. The password
+# setting can be specified multiple times for different password profiles.
+#
+#password "password@read,add,control,admin"
+#
+# This setting specifies the permissions a user has who has not yet logged in.
+#
+#default_permissions "read,add,control,admin"
+#
+###############################################################################
+
+
+# Database #######################################################################
+#
+
+#database {
+# plugin "proxy"
+# host "other.mpd.host"
+# port "6600"
+#}
+
+# Input #######################################################################
+#
+
+input {
+ plugin "curl"
+# proxy "proxy.isp.com:8080"
+# proxy_user "user"
+# proxy_password "password"
+}
+
+#
+###############################################################################
+
+# Audio Output ################################################################
+#
+
+audio_output {
+ type "pulse"
+ name "pulse audio"
+}
+
+audio_output {
+ type "fifo"
+ name "my_fifo"
+ path "/tmp/mpd.fifo"
+ format "44100:16:2"
+}
+
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
+# blocks. Setting this block is optional, though the server will only attempt
+# autodetection for one sound card.
+#
+# An example of an ALSA output:
+#
+#audio_output {
+# type "alsa"
+# name "My ALSA Device"
+## device "hw:0,0" # optional
+## mixer_type "hardware" # optional
+## mixer_device "default" # optional
+## mixer_control "PCM" # optional
+## mixer_index "0" # optional
+#}
+#
+# An example of an OSS output:
+#
+#audio_output {
+# type "oss"
+# name "My OSS Device"
+## device "/dev/dsp" # optional
+## mixer_type "hardware" # optional
+## mixer_device "/dev/mixer" # optional
+## mixer_control "PCM" # optional
+#}
+#
+# An example of a shout output (for streaming to Icecast):
+#
+#audio_output {
+# type "shout"
+# encoder "vorbis" # optional
+# name "My Shout Stream"
+# host "localhost"
+# port "8000"
+# mount "/mpd.ogg"
+# password "hackme"
+# quality "5.0"
+# bitrate "128"
+# format "44100:16:1"
+## protocol "icecast2" # optional
+## user "source" # optional
+## description "My Stream Description" # optional
+## url "http://example.com" # optional
+## genre "jazz" # optional
+## public "no" # optional
+## timeout "2" # optional
+## mixer_type "software" # optional
+#}
+#
+# An example of a recorder output:
+#
+#audio_output {
+# type "recorder"
+# name "My recorder"
+# encoder "vorbis" # optional, vorbis or lame
+# path "/var/lib/mpd/recorder/mpd.ogg"
+## quality "5.0" # do not define if bitrate is defined
+# bitrate "128" # do not define if quality is defined
+# format "44100:16:1"
+#}
+#
+# An example of a httpd output (built-in HTTP streaming server):
+#
+#audio_output {
+# type "httpd"
+# name "My HTTP Stream"
+# encoder "vorbis" # optional, vorbis or lame
+# port "8000"
+# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
+## quality "5.0" # do not define if bitrate is defined
+# bitrate "128" # do not define if quality is defined
+# format "44100:16:1"
+# max_clients "0" # optional 0=no limit
+#}
+#
+# An example of a pulseaudio output (streaming to a remote pulseaudio server)
+#
+#audio_output {
+# type "pulse"
+# name "My Pulse Output"
+## server "remote_server" # optional
+## sink "remote_server_sink" # optional
+#}
+#
+# An example of a winmm output (Windows multimedia API).
+#
+#audio_output {
+# type "winmm"
+# name "My WinMM output"
+## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+# or
+## device "0" # optional
+## mixer_type "hardware" # optional
+#}
+#
+# An example of an openal output.
+#
+#audio_output {
+# type "openal"
+# name "My OpenAL output"
+## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#}
+#
+# An example of an sndio output.
+#
+#audio_output {
+# type "sndio"
+# name "sndio output"
+# mixer_type "software"
+#}
+#
+# An example of an OS X output:
+#
+#audio_output {
+# type "osx"
+# name "My OS X Device"
+## device "Built-in Output" # optional
+## channel_map "-1,-1,0,1" # optional
+#}
+#
+## Example "pipe" output:
+#
+#audio_output {
+# type "pipe"
+# name "my pipe"
+# command "aplay -f cd 2>/dev/null"
+## Or if you're want to use AudioCompress
+# command "AudioCompress -m | aplay -f cd 2>/dev/null"
+## Or to send raw PCM stream through PCM:
+# command "nc example.org 8765"
+# format "44100:16:2"
+#}
+#
+## An example of a null output (for no audio output):
+#
+#audio_output {
+# type "null"
+# name "My Null Output"
+# mixer_type "none" # optional
+#}
+#
+###############################################################################
+
+
+# Normalization automatic volume adjustments ##################################
+#
+# This setting specifies the type of ReplayGain to use. This setting can have
+# the argument "off", "album", "track" or "auto". "auto" is a special mode that
+# chooses between "track" and "album" depending on the current state of
+# random playback. If random playback is enabled then "track" mode is used.
+# See <http://www.replaygain.org> for more details about ReplayGain.
+# This setting is off by default.
+#
+#replaygain "album"
+#
+# This setting sets the pre-amp used for files that have ReplayGain tags. By
+# default this setting is disabled.
+#
+#replaygain_preamp "0"
+#
+# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
+# By default this setting is disabled.
+#
+#replaygain_missing_preamp "0"
+#
+# This setting enables or disables ReplayGain limiting.
+# MPD calculates actual amplification based on the ReplayGain tags
+# and replaygain_preamp / replaygain_missing_preamp setting.
+# If replaygain_limit is enabled MPD will never amplify audio signal
+# above its original level. If replaygain_limit is disabled such amplification
+# might occur. By default this setting is enabled.
+#
+#replaygain_limit "yes"
+#
+# This setting enables on-the-fly normalization volume adjustment. This will
+# result in the volume of all playing audio to be adjusted so the output has
+# equal "loudness". This setting is disabled by default.
+#
+#volume_normalization "no"
+#
+###############################################################################
+
+# Character Encoding ##########################################################
+#
+# If file or directory names do not display correctly for your locale then you
+# may need to modify this setting.
+#
+#filesystem_charset "UTF-8"
+#
+###############################################################################
+#+end_src
+
+** msmtp
+:PROPERTIES:
+:header-args+: :tangle ~/.msmtprc
+:END:
+
+#+begin_src conf
+# Set default values for all following accounts.
+defaults
+port 587
+tls on
+auth on
+#tls_trust_file /etc/ssl/certs/ca-certificates.crt
+logfile ~/.msmtp.log
+
+# aminb
+account aminb
+host nix.aminb.org
+tls_fingerprint BB:98:B3:02:83:B0:E0:C3:49:3E:C2:B2:A8:60:62:78:03:B3:5D:B3:BD:B8:0A:39:BB:E4:B0:66:D1:CF:D1:6B
+tls_starttls on
+from amin@aminb.org
+user amin@aminb.org
+passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
+
+# gnu
+account gnu
+host fencepost.gnu.org
+tls_fingerprint 94:0E:37:EB:EA:44:5A:4B:B6:6F:16:3D:6C:7E:7E:44:2D:93:61:C1:FE:82:A8:29:5E:3C:12:4E:2D:BE:0E:2C
+tls_starttls on
+from aminb@gnu.org
+user aminb
+passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
+
+# uwaterloo
+account uwaterloo
+host connect.uwaterloo.ca
+tls_starttls on
+from abandali@uwaterloo.ca
+user abandali
+passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
+tls_trust_file /etc/ssl/certs/ca-certificates.crt
+
+# uwaterloo (friendly address)
+account uwaterloo-friendly : uwaterloo
+from amin.bandali@uwaterloo.ca
+
+# Set a default account
+account default : aminb
+#+end_src
+
+** ncmpcpp
+
+*** config
+:PROPERTIES:
+:header-args+: :tangle ~/.ncmpcpp/config
+:END:
+
+#+begin_src conf :tangle no
+##############################################################
+## This is the example configuration file. Copy it to ##
+## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
+## and set up your preferences. ##
+##############################################################
+#
+##### directories ######
+##
+## Directory for storing ncmpcpp related files.
+## Changing it is useful if you want to store
+## everything somewhere else and provide command
+## line setting for alternative location to config
+## file which defines that while launching ncmpcpp.
+##
+#
+ncmpcpp_directory = ~/.ncmpcpp
+#
+##
+## Directory for storing downloaded lyrics. It
+## defaults to ~/.lyrics since other MPD clients
+## (eg. ncmpc) also use that location.
+##
+#
+#lyrics_directory = ~/.lyrics
+#
+##### connection settings #####
+#
+#mpd_host = localhost
+#
+#mpd_port = 6600
+#
+#mpd_connection_timeout = 5
+#
+## Needed for tag editor and file operations to work.
+##
+mpd_music_dir = ~/usr/music
+#
+#mpd_crossfade_time = 5
+#
+##### music visualizer #####
+##
+## Note: In order to make music visualizer work you'll
+## need to use mpd fifo output, whose format parameter
+## has to be set to 44100:16:1 for mono visualization
+## or 44100:16:2 for stereo visualization. Example
+## configuration (it has to be put into mpd.conf):
+##
+## audio_output {
+## type "fifo"
+## name "Visualizer feed"
+## path "/tmp/mpd.fifo"
+## format "44100:16:2"
+## }
+##
+#
+visualizer_fifo_path = /tmp/mpd.fifo
+#
+##
+## Note: Below parameter is needed for ncmpcpp
+## to determine which output provides data for
+## visualizer and thus allow syncing between
+## visualization and sound as currently there
+## are some problems with it.
+##
+#
+visualizer_output_name = my fifo
+#
+##
+## If you set format to 44100:16:2, make it 'yes'.
+##
+visualizer_in_stereo = yes
+#
+##
+## Multiply received samples by given value. Very
+## useful for proper visualization of quiet music.
+##
+#visualizer_sample_multiplier = 1
+#
+##
+## Note: Below parameter defines how often ncmpcpp
+## has to "synchronize" visualizer and audio outputs.
+## 30 seconds is optimal value, but if you experience
+## synchronization problems, set it to lower value.
+## Keep in mind that sane values start with >=10.
+##
+#
+visualizer_sync_interval = 30
+#
+##
+## Note: To enable spectrum frequency visualization
+## you need to compile ncmpcpp with fftw3 support.
+##
+#
+## Available values: spectrum, wave, wave_filled, ellipse.
+##
+visualizer_type = spectrum
+#
+#visualizer_look = ●▮
+visualizer_look = "●•"
+#
+#visualizer_color = blue, cyan, green, yellow, magenta, red
+#
+## Alternative subset of 256 colors for terminals that support it.
+##
+#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
+#
+##### system encoding #####
+##
+## ncmpcpp should detect your charset encoding
+## but if it failed to do so, you can specify
+## charset encoding you are using here.
+##
+## Note: You can see whether your ncmpcpp build
+## supports charset detection by checking output
+## of `ncmpcpp --version`.
+##
+## Note: Since MPD uses UTF-8 by default, setting
+## this option makes sense only if your encoding
+## is different.
+##
+#
+#system_encoding = ""
+#
+##### delays #####
+#
+## Time of inactivity (in seconds) after playlist
+## highlighting will be disabled (0 = always on).
+##
+#playlist_disable_highlight_delay = 5
+#
+## Defines how long messages are supposed to be visible.
+##
+#message_delay_time = 5
+#
+##### song format #####
+##
+## For a song format you can use:
+##
+## %l - length
+## %f - filename
+## %D - directory
+## %a - artist
+## %A - album artist
+## %t - title
+## %b - album
+## %y - date
+## %n - track number (01/12 -> 01)
+## %N - full track info (01/12 -> 01/12)
+## %g - genre
+## %c - composer
+## %p - performer
+## %d - disc
+## %C - comment
+## %P - priority
+## $R - begin right alignment
+##
+## If you want to make sure that a part of the format is displayed
+## only when certain tags are present, you can archieve it by
+## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
+## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
+## It is also possible to define a list of alternatives by providing
+## several groups and separating them with '|', e.g. '{%t}|{%f}'
+## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
+## present.
+##
+## Note: If you want to set limit on maximal length of a tag, just
+## put the appropriate number between % and character that defines
+## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
+##
+## In addition, formats support markers used for text attributes.
+## They are followed by character '$'. After that you can put:
+##
+## - 0 - default window color (discards all other colors)
+## - 1 - black
+## - 2 - red
+## - 3 - green
+## - 4 - yellow
+## - 5 - blue
+## - 6 - magenta
+## - 7 - cyan
+## - 8 - white
+## - 9 - end of current color
+## - b - bold text
+## - u - underline text
+## - r - reverse colors
+## - a - use alternative character set
+##
+## If you don't want to use a non-color attribute anymore, just put it
+## again, but this time insert character '/' between '$' and attribute
+## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
+## or filename with reversed colors.
+##
+## If you want to use 256 colors and/or background colors in formats
+## (the naming scheme is described below in section about color
+## definitions), it can be done with the syntax $(COLOR), e.g. to set
+## the artist tag to one of the non-standard colors and make it have
+## yellow background, you need to write $(197_yellow)%a$(end). Note
+## that for standard colors this is interchangable with attributes
+## listed above.
+##
+## Note: colors can be nested.
+##
+#
+#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
+#
+#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
+#
+#song_library_format = {%n - }{%t}|{%f}
+#
+#
+#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
+#
+#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
+#
+#now_playing_prefix = $b
+#
+#now_playing_suffix = $/b
+#
+#browser_playlist_prefix = "$2playlist$9 "
+#
+#selected_item_prefix = $6
+#
+#selected_item_suffix = $9
+#
+#modified_item_prefix = $3> $9
+#
+##
+## Note: attributes are not supported for the following variables.
+##
+#song_window_title_format = {%a - }{%t}|{%f}
+##
+## Note: Below variables are used for sorting songs in browser.
+## The sort mode determines how songs are sorted, and can be used
+## in combination with a sort format to specify a custom sorting format.
+## Available values for browser_sort_mode are "name", "mtime", "format"
+## and "noop".
+##
+#
+#browser_sort_mode = name
+#
+#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
+#
+##### columns settings #####
+##
+## syntax of song columns list format is "column column etc."
+##
+## - syntax for each column is:
+##
+## (width of the column)[color of the column]{displayed tag}
+##
+## Note: Width is by default in %, if you want a column to
+## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
+## will be the column that take 10% of screen (so the real width
+## will depend on actual screen size), whereas (10f)[white]{a}
+## will take 10 terminal cells, no matter how wide the screen is.
+##
+## - color is optional (if you want the default one,
+## leave the field empty).
+##
+## Note: You can give a column additional attributes by putting appropriate
+## character after displayed tag character. Available attributes are:
+##
+## - r - column will be right aligned
+## - E - if tag is empty, empty tag marker won't be displayed
+##
+## You can also:
+##
+## - give a column custom name by putting it after attributes,
+## separated with character ':', e.g. {lr:Length} gives you
+## right aligned column of lengths named "Length".
+##
+## - define sequence of tags, that have to be displayed in case
+## predecessor is empty in a way similar to the one in classic
+## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
+## creates column named "Owner" that tries to display artist
+## tag and then composer and performer if previous ones are
+## not available.
+##
+#
+#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
+#
+##### various settings #####
+#
+##
+## Note: Custom command that will be executed each
+## time song changes. Useful for notifications etc.
+##
+#execute_on_song_change = ""
+#
+#playlist_show_mpd_host = no
+#
+#playlist_show_remaining_time = no
+#
+#playlist_shorten_total_times = no
+#
+#playlist_separate_albums = no
+#
+##
+## Note: Possible display modes: classic, columns.
+##
+#playlist_display_mode = columns
+#
+#browser_display_mode = classic
+#
+#search_engine_display_mode = classic
+#
+#playlist_editor_display_mode = classic
+#
+#discard_colors_if_item_is_selected = yes
+#
+#incremental_seeking = yes
+#
+#seek_time = 1
+#
+#volume_change_step = 2
+#
+#autocenter_mode = no
+#
+#centered_cursor = no
+#
+##
+## Note: You can specify third character which will
+## be used to build 'empty' part of progressbar.
+##
+#progressbar_look = =>
+progressbar_look = "─╼╶"
+#progressbar_look = "─⊙╶"
+#
+#progressbar_boldness = yes
+#
+## Available values: database, playlist.
+##
+#default_place_to_search_in = database
+#
+## Available values: classic, alternative.
+##
+#user_interface = classic
+#
+#data_fetching_delay = yes
+#
+## Available values: artist, album_artist, date, genre, composer, performer.
+##
+#media_library_primary_tag = artist
+#
+## Available values: wrapped, normal.
+##
+#default_find_mode = wrapped
+#
+#default_tag_editor_pattern = %n - %t
+#
+#header_visibility = yes
+#
+#statusbar_visibility = yes
+#
+#titles_visibility = yes
+#
+#header_text_scrolling = yes
+#
+#cyclic_scrolling = no
+#
+#lines_scrolled = 2
+#
+#follow_now_playing_lyrics = no
+#
+#fetch_lyrics_for_current_song_in_background = no
+#
+#store_lyrics_in_song_dir = no
+#
+#generate_win32_compatible_filenames = yes
+#
+#allow_for_physical_item_deletion = no
+#
+##
+## Note: If you set this variable, ncmpcpp will try to
+## get info from last.fm in language you set and if it
+## fails, it will fall back to english. Otherwise it will
+## use english the first time.
+##
+## Note: Language has to be expressed as an ISO 639 alpha-2 code.
+##
+#lastfm_preferred_language = en
+#
+#show_hidden_files_in_local_browser = no
+#
+##
+## How shall screen switcher work?
+##
+## - "previous" - switch between the current and previous screen.
+## - "screen1,...,screenN" - switch between given sequence of screens.
+##
+## Screens available for use: help, playlist, browser, search_engine,
+## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
+##
+#screen_switcher_mode = playlist, browser
+#
+##
+## Note: You can define startup screen
+## by choosing screen from the list above.
+##
+#startup_screen = playlist
+#
+##
+## Note: You can define startup slave screen
+## by choosing screen from the list above or
+## an empty value for no slave screen.
+##
+#startup_slave_screen = ""
+#
+#startup_slave_screen_focus = no
+#
+##
+## Default width of locked screen (in %).
+## Acceptable values are from 20 to 80.
+##
+#
+#locked_screen_width_part = 50
+#
+#ask_for_locked_screen_width_part = yes
+#
+#jump_to_now_playing_song_at_start = yes
+#
+#ask_before_clearing_playlists = yes
+#
+#clock_display_seconds = no
+#
+#display_volume_level = yes
+#
+#display_bitrate = no
+#
+#display_remaining_time = no
+#
+## Available values: none, basic, extended, perl.
+##
+#regular_expressions = perl
+#
+##
+## Note: If below is enabled, ncmpcpp will ignore leading
+## "The" word while sorting items in browser, tags in
+## media library, etc.
+##
+#ignore_leading_the = no
+#
+#block_search_constraints_change_if_items_found = yes
+#
+#mouse_support = yes
+#
+#mouse_list_scroll_whole_page = yes
+#
+#empty_tag_marker = <empty>
+#
+#tags_separator = " | "
+#
+#tag_editor_extended_numeration = no
+#
+#media_library_sort_by_mtime = no
+#
+#enable_window_title = yes
+#
+##
+## Note: You can choose default search mode for search
+## engine. Available modes are:
+##
+## - 1 - use mpd built-in searching (no regexes, pattern matching)
+## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
+## but if your mpd is on a remote machine, downloading big database
+## to process it can take a while
+## - 3 - match only exact values (this mode uses mpd function for searching
+## in database and local one for searching in current playlist)
+##
+#
+#search_engine_default_search_mode = 1
+#
+#external_editor = nano
+#
+## Note: set to yes if external editor is a console application.
+##
+#use_console_editor = yes
+#
+##### colors definitions #####
+##
+## It is possible to set a background color by setting a color
+## value "<foreground>_<background>", e.g. red_black will set
+## foregound color to red and background color to black.
+##
+## In addition, for terminals that support 256 colors it
+## is possible to set one of them by using a number in range
+## [1, 256] instead of color name, e.g. numerical value
+## corresponding to red_black is 2_1. To find out if the
+## terminal supports 256 colors, run ncmpcpp and check out
+## the bottom of the help screen for list of available colors
+## and their numerical values.
+##
+## Note: due to technical limitations of ncurses, if 256 colors
+## are used, it is possible to either use only the colors with
+## default background color, or all pairs from 1_1 up to 254_127,
+## depending on the ncurses version used.
+##
+#
+#colors_enabled = yes
+#
+#empty_tag_color = cyan
+#
+#header_window_color = default
+#
+#volume_color = default
+#
+#state_line_color = default
+#
+#state_flags_color = default
+#
+#main_window_color = yellow
+#
+#color1 = white
+#
+#color2 = green
+#
+#main_window_highlight_color = yellow
+#
+#progressbar_color = black
+#
+#progressbar_elapsed_color = green
+#
+#statusbar_color = default
+#
+#alternative_ui_separator_color = black
+#
+#active_column_color = red
+#
+#window_border_color = green
+#
+#active_window_border = red
+#
+#+end_src
+
+*** bindings
+:PROPERTIES:
+:header-args+: :tangle ~/.ncmpcpp/bindings
+:END:
+
+#+begin_src conf :tangle no
+def_key "j"
+ scroll_down
+def_key "k"
+ scroll_up
+
+def_key "ctrl-u"
+ page_up
+def_key "ctrl-d"
+ page_down
+
+def_key "h"
+ previous_column
+def_key "l"
+ next_column
+
+def_key "."
+ show_lyrics
+
+def_key "n"
+ next_found_item
+def_key "N"
+ previous_found_item
+
+def_key "J"
+ move_sort_order_down
+def_key "K"
+ move_sort_order_up
+#+end_src
+
projects / ~bandali / configs / commitdiff